[ 0.000000] Linux version 6.1.110+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Wed Sep 18 18:44:58 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000459] tsc: Detected 2199.998 MHz processor [ 0.000895] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000898] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000905] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000907] Disabled [ 0.000908] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000912] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000951] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027827] RAMDISK: [mem 0x04000000-0x05424fff] [ 0.027835] ACPI: Early table checksum verification disabled [ 0.028433] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028445] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028482] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028530] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028546] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028562] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028578] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028594] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028610] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028626] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028642] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028658] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028674] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028690] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028707] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028723] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028739] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028755] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028771] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028791] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028807] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028823] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028831] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028833] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028834] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028835] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028836] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028837] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028838] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028839] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028840] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028841] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028842] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028843] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028844] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028845] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028846] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028846] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028847] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028848] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028849] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028850] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028897] Setting APIC routing to Xen PV. [ 0.032834] Zone ranges: [ 0.032835] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032838] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032840] Normal empty [ 0.032841] Movable zone start for each node [ 0.032842] Early memory node ranges [ 0.032842] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032844] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032845] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032850] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032886] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034443] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034447] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221936] Remapped 102 page(s) [ 0.223308] ACPI: PM-Timer IO Port: 0x408 [ 0.223361] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223364] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223365] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223367] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223368] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223369] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223371] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223372] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223400] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223414] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223417] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223443] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223448] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223517] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223531] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223533] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223535] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223536] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223541] Booting kernel on Xen [ 0.223542] Xen version: 4.20-unstable (preserve-AD) [ 0.223545] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229772] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.230055] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.230061] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.230065] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230142] xen: PV spinlocks enabled [ 0.230145] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230150] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230152] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230190] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230199] random: crng init done [ 0.230248] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230273] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231588] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231591] software IO TLB: area num 8. [ 0.291001] Memory: 389288K/524284K available (14349K kernel code, 2686K rwdata, 4584K rodata, 1580K init, 1288K bss, 134744K reserved, 0K cma-reserved) [ 0.291169] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.293658] Dynamic Preempt: voluntary [ 0.293757] rcu: Preemptible hierarchical RCU implementation. [ 0.293758] rcu: RCU event tracing is enabled. [ 0.293759] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.293760] Trampoline variant of Tasks RCU enabled. [ 0.293761] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.293762] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.304249] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.304373] xen:events: Using FIFO-based ABI [ 0.304397] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.304405] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.304413] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.304420] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.304428] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.304435] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.304442] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.304450] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.304457] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.304464] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.304472] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.304480] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.304487] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.304496] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.304503] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.304514] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.309870] Console: colour VGA+ 80x25 [ 0.324643] printk: console [tty0] enabled [ 0.325967] printk: console [hvc0] enabled [ 0.326106] ACPI: Core revision 20220331 [ 0.341575] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.341742] Xen: using vcpuop timer interface [ 0.341750] installing Xen timer for CPU 0 [ 0.341900] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.342059] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199998) [ 0.342388] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.342505] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.342632] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.342781] Spectre V2 : Mitigation: Retpolines [ 0.343066] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.343246] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.343366] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.343487] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.343635] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.343754] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.343906] MDS: Mitigation: Clear CPU buffers [ 0.344019] TAA: Mitigation: Clear CPU buffers [ 0.344063] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.344229] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.344375] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.344527] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.344646] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.344765] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.362403] Freeing SMP alternatives memory: 40K [ 0.362530] pid_max: default: 32768 minimum: 301 [ 0.363082] LSM: Security Framework initializing [ 0.363204] SELinux: Initializing. [ 0.363343] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363498] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364152] cpu 0 spinlock event irq 25 [ 0.364272] VPMU disabled by hypervisor. [ 0.364707] cblist_init_generic: Setting adjustable number of callback queues. [ 0.364854] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.365011] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.365064] signal: max sigframe size: 1776 [ 0.365227] rcu: Hierarchical SRCU implementation. [ 0.365354] rcu: Max phase no-delay instances is 400. [ 0.365837] smp: Bringing up secondary CPUs ... [ 0.366172] installing Xen timer for CPU 1 [ 0.366646] cpu 1 spinlock event irq 35 [ 0.367200] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.367368] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.367557] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.368283] installing Xen timer for CPU 2 [ 0.368750] cpu 2 spinlock event irq 41 [ 0.369167] installing Xen timer for CPU 3 [ 0.369616] cpu 3 spinlock event irq 47 [ 0.369616] installing Xen timer for CPU 4 [ 0.370398] cpu 4 spinlock event irq 53 [ 0.370398] installing Xen timer for CPU 5 [ 0.371231] cpu 5 spinlock event irq 59 [ 0.371266] installing Xen timer for CPU 6 [ 0.372103] cpu 6 spinlock event irq 65 [ 0.372320] installing Xen timer for CPU 7 [ 0.372748] cpu 7 spinlock event irq 71 [ 0.373299] smp: Brought up 1 node, 8 CPUs [ 0.373417] smpboot: Max logical packages: 1 [ 0.373636] devtmpfs: initialized [ 0.373636] x86/mm: Memory block size: 128MB [ 0.374291] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.374357] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.374513] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.375065] PM: RTC time: 20:14:26, date: 2024-09-18 [ 0.375321] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.375467] xen:grant_table: Grant tables using version 1 layout [ 0.375605] Grant table initialized [ 0.375916] audit: initializing netlink subsys (disabled) [ 0.376083] audit: type=2000 audit(1726690467.008:1): state=initialized audit_enabled=0 res=1 [ 0.376134] thermal_sys: Registered thermal governor 'step_wise' [ 0.376134] thermal_sys: Registered thermal governor 'user_space' [ 0.376282] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.376713] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.377068] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.506026] PCI: Using configuration type 1 for base access [ 0.508592] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.509124] ACPI: Added _OSI(Module Device) [ 0.509244] ACPI: Added _OSI(Processor Device) [ 0.509362] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.509362] ACPI: Added _OSI(Processor Aggregator Device) [ 0.539041] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.540932] xen: registering gsi 9 triggering 0 polarity 0 [ 0.543717] ACPI: Dynamic OEM Table Load: [ 0.552158] ACPI: Interpreter enabled [ 0.552298] ACPI: PM: (supports S0 S4 S5) [ 0.552410] ACPI: Using IOAPIC for interrupt routing [ 0.552555] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.552706] PCI: Using E820 reservations for host bridge windows [ 0.553285] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.578337] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.578467] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.578705] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.578971] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.579064] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.579240] PCI host bridge to bus 0000:ff [ 0.579353] pci_bus 0000:ff: root bus resource [bus ff] [ 0.579547] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.579992] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.580370] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.580793] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.581230] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.581652] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.582072] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.582495] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.582942] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.583379] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.583801] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.584226] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.584652] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.585073] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.585508] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.585957] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.586365] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.586796] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.587062] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.587523] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.587994] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.588411] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.588877] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.589343] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.589810] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.590269] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.590692] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.591128] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.591594] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.592063] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.592531] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.592987] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.593368] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.593792] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.594213] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.594645] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.595115] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.595582] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.596047] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.596462] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.596885] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.597312] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.597752] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.598000] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.598381] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.598808] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.599237] pci_bus 0000:ff: on NUMA node 0 [ 0.603510] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.603638] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.603914] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.604263] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.604384] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.604867] PCI host bridge to bus 0000:00 [ 0.604981] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.605063] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.605184] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.605329] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.605474] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.605652] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.606293] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.606814] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.607186] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.607712] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.608100] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.608615] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.608993] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.609459] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.609832] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.610357] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.610720] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.611241] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.611620] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.612199] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.612821] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.613489] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.613707] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.613707] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.613707] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.613730] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.614058] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.614058] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.614058] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.615204] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.615562] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.615759] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.616301] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.616618] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.617165] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.617371] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.617493] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.625231] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.625792] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.625987] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.626071] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.626360] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.626917] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.627111] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.627234] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.627517] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.628074] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.628291] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.628412] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.628734] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.628932] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.629468] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.629788] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.630539] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.630733] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.630899] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.631056] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.631212] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.631370] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.631527] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.631838] pci 0000:00:1f.2: PME# supported from D3hot [ 0.632123] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.632347] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.632592] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.632968] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.633161] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.633876] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.634165] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.634497] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.634714] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.635469] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.635683] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.636386] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.636599] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.637304] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.637517] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.638216] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.638351] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.638690] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.638902] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.639192] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.639376] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.639726] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.639947] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.640062] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.640267] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.640388] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.640965] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.641156] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.641442] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.641626] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.641973] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.642146] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.642267] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.642471] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.642591] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.643144] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.643278] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.643417] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.643707] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.643998] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.644310] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.644435] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.644657] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.644874] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.645039] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.645474] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.645938] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.646067] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.646196] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.646549] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.646669] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.646875] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.647093] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.647279] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.647808] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.648275] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.648401] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.648536] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.648874] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.649265] pci 0000:09:00.0: enabling Extended Tags [ 0.649605] pci 0000:09:00.0: supports D1 D2 [ 0.649719] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.650080] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.650207] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.650335] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.650637] pci_bus 0000:0a: extended config space not accessible [ 0.650808] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.651013] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.651111] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.651284] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.651637] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.651927] pci 0000:0a:00.0: supports D1 D2 [ 0.652040] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.652378] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.652522] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.652652] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.653038] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.653143] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.653353] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.653514] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.654035] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.654178] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.654324] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.654542] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.654686] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.655253] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.655454] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.655663] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.655825] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.656335] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.656597] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.656742] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.656959] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.657062] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.657582] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.657789] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.657998] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.658108] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.658619] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.658848] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.658993] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.659126] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.659271] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.659788] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.659989] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.660152] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.660318] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.660829] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.661058] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.661205] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.661423] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.661567] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.662153] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.662279] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.662408] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.662547] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.663015] pci_bus 0000:00: on NUMA node 0 [ 0.663112] xen: registering gsi 13 triggering 1 polarity 0 [ 0.664084] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.664280] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.664474] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.664663] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.664851] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.664970] ACPI: PCI: Interrupt link LNKE disabled [ 0.664970] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.664970] ACPI: PCI: Interrupt link LNKF disabled [ 0.664970] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.664970] ACPI: PCI: Interrupt link LNKG disabled [ 0.664970] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.664970] ACPI: PCI: Interrupt link LNKH disabled [ 0.665058] xen:balloon: Initialising balloon driver [ 0.666154] iommu: Default domain type: Translated [ 0.673065] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.673253] SCSI subsystem initialized [ 0.674083] libata version 3.00 loaded. [ 0.674104] ACPI: bus type USB registered [ 0.674232] usbcore: registered new interface driver usbfs [ 0.674354] usbcore: registered new interface driver hub [ 0.674475] usbcore: registered new device driver usb [ 0.674601] pps_core: LinuxPPS API ver. 1 registered [ 0.674601] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.674601] PTP clock support registered [ 0.675107] Advanced Linux Sound Architecture Driver Initialized. [ 0.675354] NetLabel: Initializing [ 0.675466] NetLabel: domain hash size = 128 [ 0.675466] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.675466] NetLabel: unlabeled traffic allowed by default [ 0.676089] PCI: Using ACPI for IRQ routing [ 0.710694] PCI: pci_cache_line_size set to 64 bytes [ 0.711471] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.711474] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.712100] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.712221] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.712339] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.712492] vgaarb: loaded [ 0.714074] clocksource: Switched to clocksource tsc-early [ 0.722510] VFS: Disk quotas dquot_6.6.0 [ 0.722645] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.722792] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.722952] pnp: PnP ACPI init [ 0.723452] xen: registering gsi 8 triggering 1 polarity 0 [ 0.723617] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.723741] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.723860] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.723979] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.724112] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.724238] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.724357] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.724478] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.724632] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.724752] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.724872] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.724992] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.725131] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.725552] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.725674] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.725792] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.725917] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.726035] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.726456] xen: registering gsi 4 triggering 1 polarity 0 [ 0.726461] Already setup the GSI :4 [ 0.726572] pnp 00:03: [dma 0 disabled] [ 0.726878] xen: registering gsi 3 triggering 1 polarity 0 [ 0.726889] pnp 00:04: [dma 0 disabled] [ 0.727481] pnp: PnP ACPI: found 5 devices [ 0.758608] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.758760] NET: Registered PF_INET protocol family [ 0.758920] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.759315] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.759469] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.759616] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.759766] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.759936] TCP: Hash tables configured (established 4096 bind 4096) [ 0.760126] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.760287] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.760443] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.760840] RPC: Registered named UNIX socket transport module. [ 0.760967] RPC: Registered udp transport module. [ 0.761099] RPC: Registered tcp transport module. [ 0.761227] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.761767] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.761942] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.762135] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.762301] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.762449] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.762624] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.762797] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.762932] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.763113] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.763248] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.763398] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.763542] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.763687] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.763810] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.763955] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.764117] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.764280] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.764403] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.764548] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.764692] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.764870] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.764992] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.765165] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.765312] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.765458] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.765593] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.765726] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.765898] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.766082] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.766292] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.766412] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.766552] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.766713] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.766832] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.766971] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.767160] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.767283] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.767425] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.767596] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.767717] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.767856] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.768020] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.768201] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.768357] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.768511] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.768664] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.768817] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.768974] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.769140] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.769294] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.769414] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.769553] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.769688] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.769861] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.770011] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.770153] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.770283] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.770404] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.770525] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.770644] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.770763] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.770908] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.771025] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.771169] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.771288] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.771412] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.771528] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.771651] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.771784] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.771903] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.772019] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.772164] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.772702] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.772916] xen: registering gsi 19 triggering 0 polarity 1 [ 0.772942] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.781730] xen: registering gsi 18 triggering 0 polarity 1 [ 0.781751] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.797548] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 15496 usecs [ 0.797814] xen: registering gsi 18 triggering 0 polarity 1 [ 0.797819] Already setup the GSI :18 [ 0.814483] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 16332 usecs [ 0.814694] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.814871] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.814957] Unpacking initramfs... [ 0.814993] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.815349] kvm: no hardware support for 'kvm_intel' [ 0.823110] has_svm: not amd or hygon [ 0.823246] kvm: no hardware support for 'kvm_amd' [ 0.823363] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.823726] clocksource: Switched to clocksource tsc [ 0.826459] Initialise system trusted keyrings [ 0.826751] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.828290] NFS: Registering the id_resolver key type [ 0.828418] Key type id_resolver registered [ 0.828530] Key type id_legacy registered [ 0.828746] 9p: Installing v9fs 9p2000 file system support [ 0.842458] Key type asymmetric registered [ 0.842608] Asymmetric key parser 'x509' registered [ 0.842745] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.842902] io scheduler mq-deadline registered [ 0.843016] io scheduler kyber registered [ 0.843970] xen: registering gsi 16 triggering 0 polarity 1 [ 0.844000] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.844535] xen: registering gsi 16 triggering 0 polarity 1 [ 0.844541] Already setup the GSI :16 [ 0.845221] xen: registering gsi 16 triggering 0 polarity 1 [ 0.845227] Already setup the GSI :16 [ 0.845569] xen: registering gsi 16 triggering 0 polarity 1 [ 0.845574] Already setup the GSI :16 [ 0.845905] xen: registering gsi 16 triggering 0 polarity 1 [ 0.845909] Already setup the GSI :16 [ 0.846486] xen: registering gsi 16 triggering 0 polarity 1 [ 0.846490] Already setup the GSI :16 [ 0.847077] xen: registering gsi 16 triggering 0 polarity 1 [ 0.847082] Already setup the GSI :16 [ 0.847520] xen: registering gsi 17 triggering 0 polarity 1 [ 0.847536] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.847886] xen: registering gsi 19 triggering 0 polarity 1 [ 0.847891] Already setup the GSI :19 [ 0.848328] xen: registering gsi 16 triggering 0 polarity 1 [ 0.848333] Already setup the GSI :16 [ 0.849016] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.849191] ACPI: button: Power Button [PWRB] [ 0.849337] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.849620] ACPI: button: Power Button [PWRF] [ 0.849912] Monitor-Mwait will be used to enter C-1 state [ 0.849946] Monitor-Mwait will be used to enter C-2 state [ 0.849963] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.850362] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.850784] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.851203] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.851954] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.852346] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.852854] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.853165] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.853998] xen:xen_evtchn: Event-channel device installed [ 0.854197] xen_pciback: backend is vpci [ 0.854962] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.855284] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.856057] hpet_acpi_add: no address or irqs in _CRS [ 0.856268] Non-volatile memory driver v1.3 [ 0.856382] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.859167] loop: module loaded [ 0.865604] ahci 0000:00:1f.2: version 3.0 [ 0.865704] xen: registering gsi 16 triggering 0 polarity 1 [ 0.865713] Already setup the GSI :16 [ 0.866039] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.866196] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.882152] scsi host0: ahci [ 0.882535] scsi host1: ahci [ 0.882910] scsi host2: ahci [ 0.883231] scsi host3: ahci [ 0.883545] scsi host4: ahci [ 0.883900] scsi host5: ahci [ 0.884044] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 74 [ 0.884224] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 74 [ 0.884369] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 74 [ 0.884513] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 74 [ 0.884674] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 74 [ 0.884819] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 74 [ 0.885256] tun: Universal TUN/TAP device driver, 1.6 [ 0.885604] e100: Intel(R) PRO/100 Network Driver [ 0.885742] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.885924] sky2: driver version 1.30 [ 0.886174] xen_netfront: Initialising Xen virtual ethernet driver [ 0.886683] xen: registering gsi 18 triggering 0 polarity 1 [ 0.886697] Already setup the GSI :18 [ 0.886907] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.887168] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.887344] ehci-pci 0000:00:1a.0: debug port 2 [ 0.891486] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.898604] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.898830] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.898979] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.899123] usb usb1: Product: EHCI Host Controller [ 0.899238] usb usb1: Manufacturer: Linux 6.1.110+ ehci_hcd [ 0.899354] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.899686] hub 1-0:1.0: USB hub found [ 0.899812] hub 1-0:1.0: 2 ports detected [ 0.900172] xen: registering gsi 18 triggering 0 polarity 1 [ 0.900181] Already setup the GSI :18 [ 0.900372] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.900634] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.900860] ehci-pci 0000:00:1d.0: debug port 2 [ 0.905002] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.911600] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.911825] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.912012] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.912157] usb usb2: Product: EHCI Host Controller [ 0.912271] usb usb2: Manufacturer: Linux 6.1.110+ ehci_hcd [ 0.912387] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.912716] hub 2-0:1.0: USB hub found [ 0.912847] hub 2-0:1.0: 2 ports detected [ 0.913284] xen: registering gsi 19 triggering 0 polarity 1 [ 0.913294] Already setup the GSI :19 [ 0.913506] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.913729] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.914947] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.915413] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.915621] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.915769] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.915973] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.916126] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.916270] usb usb3: Product: xHCI Host Controller [ 0.916385] usb usb3: Manufacturer: Linux 6.1.110+ xhci-hcd [ 0.916501] usb usb3: SerialNumber: 0000:00:14.0 [ 0.916794] hub 3-0:1.0: USB hub found [ 0.916927] hub 3-0:1.0: 8 ports detected [ 0.918088] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.918241] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.918385] usb usb4: Product: xHCI Host Controller [ 0.918499] usb usb4: Manufacturer: Linux 6.1.110+ xhci-hcd [ 0.918632] usb usb4: SerialNumber: 0000:00:14.0 [ 0.918883] hub 4-0:1.0: USB hub found [ 0.919014] hub 4-0:1.0: 6 ports detected [ 0.920202] usbcore: registered new interface driver usblp [ 0.920369] usbcore: registered new interface driver usb-storage [ 0.922373] Freeing initrd memory: 20628K [ 0.922616] i8042: PNP: No PS/2 controller found. [ 0.922955] rtc_cmos 00:00: RTC can wake from S4 [ 0.923655] rtc_cmos 00:00: registered as rtc0 [ 0.923815] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.924025] device-mapper: uevent: version 1.0.3 [ 0.924130] xen: registering gsi 18 triggering 0 polarity 1 [ 0.924149] Already setup the GSI :18 [ 0.924237] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.924296] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.924448] intel_pstate: CPU model not supported [ 0.924480] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.924596] hid: raw HID events driver (C) Jiri Kosina [ 0.925057] usbcore: registered new interface driver usbhid [ 0.925120] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.925174] usbhid: USB HID core driver [ 0.925942] Initializing XFRM netlink socket [ 0.926188] NET: Registered PF_INET6 protocol family [ 0.926744] Segment Routing with IPv6 [ 0.926866] In-situ OAM (IOAM) with IPv6 [ 0.927009] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.927252] NET: Registered PF_PACKET protocol family [ 0.927404] 9pnet: Installing 9P2000 support [ 0.927532] Key type dns_resolver registered [ 0.928270] IPI shorthand broadcast: enabled [ 0.928410] sched_clock: Marking stable (890687362, 37541390)->(1775150828, -846922076) [ 0.928978] registered taskstats version 1 [ 0.929093] Loading compiled-in X.509 certificates [ 0.931772] PM: Magic number: 8:661:245 [ 0.931956] acpi device:88: hash matches [ 0.932074] acpi device:5b: hash matches [ 0.932229] printk: console [netcon0] enabled [ 0.932344] netconsole: network logging started [ 0.932696] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.944528] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.944888] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.945562] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.945639] ALSA device list: [ 0.953447] No soundcards found. [ 1.143609] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.151595] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.159714] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.196799] ata5: SATA link down (SStatus 0 SControl 300) [ 1.197135] ata4: SATA link down (SStatus 0 SControl 300) [ 1.197322] ata6: SATA link down (SStatus 0 SControl 300) [ 1.197461] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.197652] ata2: SATA link down (SStatus 0 SControl 300) [ 1.197806] ata1: SATA link down (SStatus 0 SControl 300) [ 1.198724] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.272057] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.272211] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.272582] hub 1-1:1.0: USB hub found [ 1.272805] hub 1-1:1.0: 4 ports detected [ 1.280056] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.280212] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.280580] hub 2-1:1.0: USB hub found [ 1.280810] hub 2-1:1.0: 4 ports detected [ 1.287176] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.287329] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.287452] usb 3-3: Product: USB2.0 Hub [ 1.288256] hub 3-3:1.0: USB hub found [ 1.288714] hub 3-3:1.0: 4 ports detected [ 1.289018] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.289158] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.316960] ata3.00: configured for UDMA/133 [ 1.317251] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.318123] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.318221] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.318493] sd 2:0:0:0: [sda] Write Protect is off [ 1.318631] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.318699] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.318933] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.338256] sda: sda1 sda2 < sda5 > [ 1.338746] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.339909] Freeing unused kernel image (initmem) memory: 1580K [ 1.340037] Write protecting the kernel read-only data: 22528k [ 1.357950] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.359237] Freeing unused kernel image (rodata/data gap) memory: 1560K [ 1.404565] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.530881] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.531036] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.531703] hub 3-4:1.0: USB hub found [ 1.531923] hub 3-4:1.0: 4 ports detected [ 1.594592] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.672091] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.672246] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.672392] usb 3-3.2: Product: USB2.0 Hub [ 1.673069] hub 3-3.2:1.0: USB hub found [ 1.673540] hub 3-3.2:1.0: 4 ports detected [ 1.822565] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.822693] Run /init as init process [ 1.822803] with arguments: [ 1.822804] /init [ 1.822805] placeholder [ 1.822806] with environment: [ 1.822807] HOME=/ [ 1.822808] TERM=linux [ 1.826577] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.930977] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.931166] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.937059] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 2.266702] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.266855] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.267428] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.267771] xen: registering gsi 16 triggering 0 polarity 1 [ 2.267783] Already setup the GSI :16 [ 2.274169] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.274331] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.274640] xen: registering gsi 16 triggering 0 polarity 1 [ 2.274653] Already setup the GSI :16 [ 2.294828] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 2.296128] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 2.296457] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.301145] pps pps0: new PPS source ptp0 [ 2.301364] igb 0000:07:00.0: added PHC on eth0 [ 2.301498] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.301646] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.301815] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.301930] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.302166] xen: registering gsi 17 triggering 0 polarity 1 [ 2.302176] Already setup the GSI :17 [ 2.331663] pps pps1: new PPS source ptp1 [ 2.331844] igb 0000:08:00.0: added PHC on eth1 [ 2.331983] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.332105] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.332270] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.332386] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.332627] xen: registering gsi 16 triggering 0 polarity 1 [ 2.332635] Already setup the GSI :16 [ 2.390314] igb 0000:0b:00.0: added PHC on eth2 [ 2.390454] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.390594] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.390798] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.390914] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.391141] xen: registering gsi 17 triggering 0 polarity 1 [ 2.391150] Already setup the GSI :17 [ 2.449000] igb 0000:0b:00.1: added PHC on eth3 [ 2.449138] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.449259] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.449464] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.449596] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.449830] xen: registering gsi 18 triggering 0 polarity 1 [ 2.449838] Already setup the GSI :18 [ 2.506751] igb 0000:0b:00.2: added PHC on eth4 [ 2.506893] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.507015] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.507228] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.507345] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.507598] xen: registering gsi 19 triggering 0 polarity 1 [ 2.507607] Already setup the GSI :19 [ 2.565712] igb 0000:0b:00.3: added PHC on eth5 [ 2.565854] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.565976] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.566180] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.566302] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.569484] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.579170] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.585883] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.594804] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.605725] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.613964] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 3.009088] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.139010] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.139222] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.435517] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.435861] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.436081] xen: registering gsi 17 triggering 0 polarity 1 [ 3.436092] Already setup the GSI :17 [ 4.176838] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.306797] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.306980] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.603404] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.605803] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 4.618234] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 5.024546] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.032043] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.695959] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.823254] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.841759] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.920076] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.457990] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.458160] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.458336] device enx0cc47a9f87be entered promiscuous mode [ 15.006111] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 15.109889] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 15.110144] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 15.110268] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 15.110581] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready