[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.110+ (osstest@himrod1) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Wed Sep 18 17:44:00 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Xen 4.20 support found [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 16 pages/cpu s35412 r8192 d21932 u65536 [ 0.000000] pcpu-alloc: s35412 r8192 d21932 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--lakeside--vg-root rootdelay=3 ro root=/dev/mapper/arndale--lakeside--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 416844K/524288K available (14336K kernel code, 2180K rwdata, 5600K rodata, 2048K init, 438K bss, 41908K reserved, 65536K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000013] Switching to timer-based delay loop, resolution 41ns [ 0.000499] Console: colour dummy device 80x30 [ 0.292967] printk: console [hvc0] enabled [ 0.297158] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.307561] CPU: Testing write buffer coherency: ok [ 0.312503] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.322055] CPU0: Spectre BHB: enabling loop workaround for all CPUs [ 0.328469] pid_max: default: 32768 minimum: 301 [ 0.333261] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.340536] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.348947] /cpus/cpu@0 missing clock-frequency property [ 0.353739] /cpus/cpu@1 missing clock-frequency property [ 0.359136] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.365651] xen:grant_table: Grant tables using version 1 layout [ 0.371007] Grant table initialized [ 0.374523] xen:events: Using FIFO-based ABI [ 0.378840] Xen: initializing cpu0 [ 0.382369] Setting up static identity map for 0x60300000 - 0x603000ac [ 0.390100] rcu: Hierarchical SRCU implementation. [ 0.393757] rcu: Max phase no-delay instances is 1000. [ 0.401831] EFI services will not be available. [ 0.405140] smp: Bringing up secondary CPUs ... [ 0.479586] Xen: initializing cpu1 [ 0.479740] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.479768] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.498647] smp: Brought up 1 node, 2 CPUs [ 0.502416] SMP: Total of 2 processors activated (96.00 BogoMIPS). [ 0.508726] CPU: All CPU(s) started in SVC mode. [ 0.514131] devtmpfs: initialized [ 0.526505] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.532996] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.542717] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.550767] pinctrl core: initialized pinctrl subsystem [ 0.557257] DMI not present or invalid. [ 0.560358] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.567542] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.576279] thermal_sys: Registered thermal governor 'step_wise' [ 0.576408] software IO TLB: area num 2. [ 0.585089] software IO TLB: only able to allocate 8 MB [ 0.592234] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) [ 0.597415] No ATAGs? [ 0.599767] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 0.608265] Serial: AMBA PL011 UART driver [ 0.630422] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 62 [ 0.679820] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 [ 0.706124] xen:balloon: Initialising balloon driver [ 0.713626] iommu: Default domain type: Translated [ 0.717124] iommu: DMA domain TLB invalidation policy: strict mode [ 0.724076] SCSI subsystem initialized [ 0.727443] libata version 3.00 loaded. [ 0.727632] usbcore: registered new interface driver usbfs [ 0.732871] usbcore: registered new interface driver hub [ 0.738267] usbcore: registered new device driver usb [ 0.744889] s3c-i2c 12c60000.i2c: slave address 0x66 [ 0.748497] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz [ 0.754799] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 [ 0.763249] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 [ 0.772386] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter [ 0.777905] s3c-i2c 12c90000.i2c: slave address 0x00 [ 0.782594] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz [ 0.788855] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter [ 0.794073] s3c-i2c 12ce0000.i2c: slave address 0x00 [ 0.798844] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz [ 0.804964] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter [ 0.810157] s3c-i2c 121d0000.i2c: slave address 0x00 [ 0.815056] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz [ 0.821089] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter [ 0.826862] pps_core: LinuxPPS API ver. 1 registered [ 0.831298] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.840498] PTP clock support registered [ 0.851801] EDAC MC: Ver: 3.0.0 [ 0.863019] vgaarb: loaded [ 0.867358] clocksource: Switched to clocksource arch_sys_counter [ 0.878781] NET: Registered PF_INET protocol family [ 0.882431] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.890348] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.898026] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.905816] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.913667] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.920947] TCP: Hash tables configured (established 4096 bind 4096) [ 0.927294] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.933873] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.940995] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.950467] RPC: Registered named UNIX socket transport module. [ 0.955010] RPC: Registered udp transport module. [ 0.959815] RPC: Registered tcp transport module. [ 0.964556] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.971080] PCI: CLS 0 bytes, default 64 [ 0.976369] Initialise system trusted keyrings [ 0.979772] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 0.991232] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.996242] NFS: Registering the id_resolver key type [ 1.000843] Key type id_resolver registered [ 1.002408] Trying to unpack rootfs image as initramfs... [ 1.005065] Key type id_legacy registered [ 1.014713] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.021415] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.068141] Key type asymmetric registered [ 1.070876] Asymmetric key parser 'x509' registered [ 1.075962] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.083316] io scheduler mq-deadline registered [ 1.087901] io scheduler kyber registered [ 1.128730] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc [ 1.210821] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.217027] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 1.249535] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.255739] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 1.278007] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.284208] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 1.318481] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.324685] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 1.351110] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected [ 1.412548] xen:xen_evtchn: Event-channel device installed [ 1.581385] Freeing initrd memory: 11780K [ 1.621007] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 1.630378] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 113, base_baud = 0) is a S3C6400/10 [ 1.638565] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 114, base_baud = 0) is a S3C6400/10 [ 1.647586] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 115, base_baud = 0) is a S3C6400/10 [ 1.656869] SuperH (H)SCI(F) driver initialized [ 1.661787] STMicroelectronics ASC driver initialized [ 1.667032] STM32 USART driver initialized [ 1.671941] exynos-trng 10830600.rng: Exynos True Random Number Generator. [ 1.685510] brd: module loaded [ 1.691439] loop: module loaded [ 1.708601] Invalid max_queues (4), will use default max: 2. [ 1.735045] tun: Universal TUN/TAP device driver, 1.6 [ 1.738949] CAN device driver interface [ 1.744021] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.754451] xen_netfront: Initialising Xen virtual ethernet driver [ 1.759371] pegasus: Pegasus/Pegasus II USB Ethernet driver [ 1.764928] usbcore: registered new interface driver pegasus [ 1.770674] usbcore: registered new interface driver asix [ 1.776118] usbcore: registered new interface driver ax88179_178a [ 1.782293] usbcore: registered new interface driver cdc_ether [ 1.788206] usbcore: registered new interface driver smsc75xx [ 1.794008] usbcore: registered new interface driver smsc95xx [ 1.799830] usbcore: registered new interface driver net1080 [ 1.805549] usbcore: registered new interface driver cdc_subset [ 1.811550] usbcore: registered new interface driver zaurus [ 1.817202] usbcore: registered new interface driver cdc_ncm [ 1.826445] usbcore: registered new interface driver usb-storage [ 1.860695] s5m-rtc s5m-rtc: registered as rtc0 [ 1.869497] s5m-rtc s5m-rtc: setting system clock to 2024-09-19T01:39:15 UTC (1726709955) [ 1.878051] i2c_dev: i2c /dev entries driver [ 1.888289] syscon-poweroff 10040000.system-controller:syscon-poweroff: pm_power_off already claimed for psci_sys_poweroff [ 1.897991] syscon-poweroff: probe of 10040000.system-controller:syscon-poweroff failed with error -16 [ 1.909214] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found [ 1.920000] device-mapper: uevent: version 1.0.3 [ 1.923465] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 1.932455] cpu cpu0: OPP table can't be empty [ 1.937475] failed to register cpuidle driver [ 1.940685] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver [ 1.948961] sdhci: Secure Digital Host Controller Interface driver [ 1.954051] sdhci: Copyright(c) Pierre Ossman [ 1.962031] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.969728] ledtrig-cpu: registered to indicate activity on CPUs [ 1.975047] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 1.981689] usbcore: registered new interface driver usbhid [ 1.986505] usbhid: USB HID core driver [ 1.997297] NET: Registered PF_INET6 protocol family [ 2.001949] Segment Routing with IPv6 [ 2.004678] In-situ OAM (IOAM) with IPv6 [ 2.008724] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.015088] NET: Registered PF_PACKET protocol family [ 2.019786] can: controller area network core [ 2.024194] NET: Registered PF_CAN protocol family [ 2.029054] can: raw protocol [ 2.032053] can: broadcast manager protocol [ 2.036310] can: netlink gateway - max_hops=1 [ 2.040989] Key type dns_resolver registered [ 2.045726] ThumbEE CPU extension supported. [ 2.049455] Registering SWP/SWPB emulation handler [ 2.054760] Loading compiled-in X.509 certificates [ 2.083157] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 2.089278] clk: Not disabling unused clocks [ 2.096278] Freeing unused kernel image (initmem) memory: 2048K [ 2.102419] Run /init as init process [ 2.104700] with arguments: [ 2.104706] /init [ 2.104712] with environment: [ 2.104717] HOME=/ [ 2.104722] TERM=linux [ 3.519481] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator [ 3.547538] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator [ 3.556644] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator [ 3.591962] Synopsys Designware Multimedia Card Interface Driver [ 3.611050] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. [ 3.611090] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. [ 3.642883] dwmmc_exynos 12200000.mmc: Using internal DMA controller. [ 3.648030] dwmmc_exynos 12200000.mmc: Version ID is 241a [ 3.653497] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 125,32 bit host data width,128 deep fifo [ 3.663431] mmc_host mmc0: card is polling. [ 3.672124] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator [ 3.678329] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator [ 3.680048] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 3.685729] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator [ 3.706117] phy phy-12130000.phy.9: phy_power_on was called before phy_init [ 3.717051] exynos-ohci 12120000.usb: USB Host Controller [ 3.722216] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 [ 3.749539] s2mps11-clk s5m8767-clk: DMA mask not set [ 3.780593] exynos-ohci 12120000.usb: irq 127, io mem 0x12120000 [ 3.785389] dwmmc_exynos 12220000.mmc: Using internal DMA controller. [ 3.791797] dwmmc_exynos 12220000.mmc: Version ID is 241a [ 3.797299] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo [ 3.812675] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled [ 3.818417] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 3.827293] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 3.832570] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 3.842662] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 3.853071] hub 1-0:1.0: USB hub found [ 3.860537] scsi host0: ahci-dwc [ 3.863418] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 128 [ 3.877712] hub 1-0:1.0: 3 ports detected [ 3.882794] phy phy-12130000.phy.9: phy_power_on was called before phy_init [ 3.887587] mmc0: new DDR MMC card at address 0001 [ 3.888437] exynos-ehci 12110000.usb: EHCI Host Controller [ 3.898859] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 [ 3.907232] exynos-ehci 12110000.usb: irq 127, io mem 0x12110000 [ 3.907886] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB [ 3.921994] mmcblk0: p1 p2 p3 p4 [ 3.929612] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB [ 3.936599] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB [ 3.943771] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) [ 3.947424] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 [ 3.959714] hub 2-0:1.0: USB hub found [ 3.964491] hub 2-0:1.0: 3 ports detected [ 3.977482] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling [ 3.982042] s3c-rtc 101e0000.rtc: registered as rtc1 [ 3.988789] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 3.997315] mmc1: new high speed SDHC card at address aaaa [ 4.004025] mmcblk1: mmc1:aaaa SU04G 3.69 GiB [ 4.367399] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.373128] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 [ 4.379022] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) [ 4.386623] ata1.00: configured for UDMA/133 [ 4.390320] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 [ 4.399316] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 4.405645] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 4.411059] sd 0:0:0:0: [sda] Write Protect is off [ 4.415789] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.415863] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.425027] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 4.467359] sda: sda1 sda2 < sda5 > [ 4.470368] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.487242] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) [ 4.968175] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host [ 4.975163] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 4.979586] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 [ 4.990586] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 [ 4.999137] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 [ 5.004889] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 5.010304] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 [ 5.018042] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed [ 5.025507] hub 3-0:1.0: USB hub found [ 5.028645] hub 3-0:1.0: 1 port detected [ 5.033248] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.041490] hub 4-0:1.0: USB hub found [ 5.044491] hub 4-0:1.0: 1 port detected [ 7.397375] random: crng init done [ 11.383256] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 11.649007] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: disabled. [ 15.375634] wm8994 3-001a: Device is not a WM8994, ID is 0 [ 15.381645] wm8994: probe of 3-001a failed with error -22 [ 15.607409] usb3503 usb-hub: switched to HUB mode [ 15.610749] usb3503 usb-hub: usb3503_probe: probed in hub mode [ 15.656219] s5p-secss 10830000.sss: s5p-sss driver registered [ 15.731288] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled [ 15.775223] mc: Linux media interface: v0.10 [ 15.879712] videodev: Linux video capture interface: v2.00 [ 15.957434] usb 2-3: new high-speed USB device number 2 using exynos-ehci [ 16.128242] s5p-mfc 11000000.codec: Adding to iommu group 0 [ 16.138713] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers [ 16.172738] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 [ 16.199140] hub 2-3:1.0: USB hub found [ 16.201727] hub 2-3:1.0: 3 ports detected [ 16.207803] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 [ 16.215188] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel [ 16.228049] s5p-mfc 11000000.codec: decoder registered as /dev/video0 [ 16.239355] s5p-mfc 11000000.codec: encoder registered as /dev/video1 [ 16.277092] exynos-gsc 13e00000.gsc: Adding to iommu group 1 [ 16.305455] exynos-gsc 13e10000.gsc: Adding to iommu group 2 [ 16.314467] exynos-gsc 13e20000.gsc: Adding to iommu group 3 [ 16.334919] exynos-gsc 13e30000.gsc: Adding to iommu group 4 [ 16.373871] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s [ 16.547403] usb 2-3.2: new high-speed USB device number 3 using exynos-ehci [ 16.710163] hub 2-3.2:1.0: USB hub found [ 16.722380] hub 2-3.2:1.0: 4 ports detected [ 16.984084] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 [ 16.991842] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 [ 17.000514] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel [ 17.012162] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 [ 17.020100] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 [ 17.028774] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel [ 17.087446] usb 2-3.2.4: new high-speed USB device number 4 using exynos-ehci [ 17.250496] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random [ 17.909244] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:004:10] driver [Asix Electronics AX88772A] (irq=POLL) [ 17.923487] Asix Electronics AX88772A usb-002:004:10: attached PHY driver (mii_bus:phy_addr=usb-002:004:10, irq=POLL) [ 17.933313] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 5a:31:ae:c8:50:5a [ 17.983319] usbcore: registered new device driver onboard-usb-hub [ 17.990417] usb 2-3.2.4: USB disconnect, device number 4 [ 17.994639] asix 2-3.2.4:1.0 eth0: unregister 'asix' usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet [ 18.158178] hub 2-3.2:1.0: USB hub found [ 18.161166] hub 2-3.2:1.0: 4 ports detected [ 18.171800] hub 2-3.2:1.0: USB hub found [ 18.174756] hub 2-3.2:1.0: 4 ports detected [ 18.507414] usb 2-3.2.4: new high-speed USB device number 5 using exynos-ehci [ 19.319245] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:005:10] driver [Asix Electronics AX88772A] (irq=POLL) [ 19.333490] Asix Electronics AX88772A usb-002:005:10: attached PHY driver (mii_bus:phy_addr=usb-002:005:10, irq=POLL) [ 19.343318] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 5a:31:ae:c8:50:5a [ 19.831897] EXT4-fs (dm-0): re-mounted. Quota mode: disabled. [ 21.852773] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 21.904678] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: disabled. [ 22.001094] Adding 1949692k swap on /dev/mapper/arndale--lakeside--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 23.820395] xenbr0: port 1(eth0) entered blocking state [ 23.824252] xenbr0: port 1(eth0) entered disabled state [ 23.829724] device eth0 entered promiscuous mode [ 23.839362] asix 2-3.2.4:1.0 eth0: configuring for phy/internal link mode [ 26.014622] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off [ 26.017416] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 26.026987] xenbr0: port 1(eth0) entered blocking state [ 26.032203] xenbr0: port 1(eth0) entered forwarding state [ 26.037782] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready