[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.110+ (osstest@himrod2) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Thu Sep 19 04:52:20 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Xen 4.20 support found [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 16 pages/cpu s35412 r8192 d21932 u65536 [ 0.000000] pcpu-alloc: s35412 r8192 d21932 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--lakeside--vg-root rootdelay=3 ro root=/dev/mapper/arndale--lakeside--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 416844K/524288K available (14336K kernel code, 2180K rwdata, 5600K rodata, 2048K init, 438K bss, 41908K reserved, 65536K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000013] Switching to timer-based delay loop, resolution 41ns [ 0.000500] Console: colour dummy device 80x30 [ 0.292968] printk: console [hvc0] enabled [ 0.297160] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.307560] CPU: Testing write buffer coherency: ok [ 0.312503] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.322075] CPU0: Spectre BHB: enabling loop workaround for all CPUs [ 0.328470] pid_max: default: 32768 minimum: 301 [ 0.333262] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.340537] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.348950] /cpus/cpu@0 missing clock-frequency property [ 0.353739] /cpus/cpu@1 missing clock-frequency property [ 0.359136] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.365651] xen:grant_table: Grant tables using version 1 layout [ 0.370985] Grant table initialized [ 0.374523] xen:events: Using FIFO-based ABI [ 0.378843] Xen: initializing cpu0 [ 0.382371] Setting up static identity map for 0x60300000 - 0x603000ac [ 0.390096] rcu: Hierarchical SRCU implementation. [ 0.393757] rcu: Max phase no-delay instances is 1000. [ 0.401833] EFI services will not be available. [ 0.405138] smp: Bringing up secondary CPUs ... [ 0.479163] Xen: initializing cpu1 [ 0.479317] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.479345] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.498216] smp: Brought up 1 node, 2 CPUs [ 0.501991] SMP: Total of 2 processors activated (96.00 BogoMIPS). [ 0.508303] CPU: All CPU(s) started in SVC mode. [ 0.513700] devtmpfs: initialized [ 0.526164] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.532655] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.542378] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.550388] pinctrl core: initialized pinctrl subsystem [ 0.556930] DMI not present or invalid. [ 0.560042] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.567227] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.575967] thermal_sys: Registered thermal governor 'step_wise' [ 0.576095] software IO TLB: area num 2. [ 0.584775] software IO TLB: only able to allocate 8 MB [ 0.591903] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) [ 0.597087] No ATAGs? [ 0.599435] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 0.607934] Serial: AMBA PL011 UART driver [ 0.640127] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 62 [ 0.689484] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 [ 0.715809] xen:balloon: Initialising balloon driver [ 0.723331] iommu: Default domain type: Translated [ 0.726829] iommu: DMA domain TLB invalidation policy: strict mode [ 0.733784] SCSI subsystem initialized [ 0.737146] libata version 3.00 loaded. [ 0.737337] usbcore: registered new interface driver usbfs [ 0.742576] usbcore: registered new interface driver hub [ 0.747994] usbcore: registered new device driver usb [ 0.754587] s3c-i2c 12c60000.i2c: slave address 0x66 [ 0.758212] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz [ 0.764505] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 [ 0.772945] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 [ 0.782083] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter [ 0.787603] s3c-i2c 12c90000.i2c: slave address 0x00 [ 0.792289] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz [ 0.798549] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter [ 0.803765] s3c-i2c 12ce0000.i2c: slave address 0x00 [ 0.808561] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz [ 0.814653] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter [ 0.819835] s3c-i2c 121d0000.i2c: slave address 0x00 [ 0.824752] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz [ 0.830786] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter [ 0.836554] pps_core: LinuxPPS API ver. 1 registered [ 0.840996] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.850195] PTP clock support registered [ 0.861493] EDAC MC: Ver: 3.0.0 [ 0.865553] vgaarb: loaded [ 0.870670] clocksource: Switched to clocksource arch_sys_counter [ 0.882166] NET: Registered PF_INET protocol family [ 0.885807] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.893726] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.901411] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.909202] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.917048] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.924334] TCP: Hash tables configured (established 4096 bind 4096) [ 0.930696] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.937247] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.944384] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.959915] RPC: Registered named UNIX socket transport module. [ 0.964468] RPC: Registered udp transport module. [ 0.969227] RPC: Registered tcp transport module. [ 0.974012] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.980515] PCI: CLS 0 bytes, default 64 [ 0.985835] Initialise system trusted keyrings [ 0.989162] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 1.000700] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.005716] NFS: Registering the id_resolver key type [ 1.010301] Key type id_resolver registered [ 1.011871] Trying to unpack rootfs image as initramfs... [ 1.014553] Key type id_legacy registered [ 1.024198] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.030874] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.038582] Key type asymmetric registered [ 1.042501] Asymmetric key parser 'x509' registered [ 1.047559] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.054909] io scheduler mq-deadline registered [ 1.059494] io scheduler kyber registered [ 1.069677] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc [ 1.124714] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.130958] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 1.146451] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.152674] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 1.167367] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.173620] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 1.188248] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.194509] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 1.212253] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected [ 1.223423] xen:xen_evtchn: Event-channel device installed [ 1.274025] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 1.282693] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 113, base_baud = 0) is a S3C6400/10 [ 1.290866] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 114, base_baud = 0) is a S3C6400/10 [ 1.299893] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 115, base_baud = 0) is a S3C6400/10 [ 1.309253] SuperH (H)SCI(F) driver initialized [ 1.314025] STMicroelectronics ASC driver initialized [ 1.319324] STM32 USART driver initialized [ 1.330953] exynos-trng 10830600.rng: Exynos True Random Number Generator. [ 1.364876] brd: module loaded [ 1.370824] loop: module loaded [ 1.592581] Invalid max_queues (4), will use default max: 2. [ 1.631664] tun: Universal TUN/TAP device driver, 1.6 [ 1.651976] CAN device driver interface [ 1.655904] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.666316] xen_netfront: Initialising Xen virtual ethernet driver [ 1.671207] pegasus: Pegasus/Pegasus II USB Ethernet driver [ 1.676788] usbcore: registered new interface driver pegasus [ 1.682535] usbcore: registered new interface driver asix [ 1.688002] usbcore: registered new interface driver ax88179_178a [ 1.694157] usbcore: registered new interface driver cdc_ether [ 1.700059] usbcore: registered new interface driver smsc75xx [ 1.705885] usbcore: registered new interface driver smsc95xx [ 1.711704] usbcore: registered new interface driver net1080 [ 1.717431] usbcore: registered new interface driver cdc_subset [ 1.723443] usbcore: registered new interface driver zaurus [ 1.729086] usbcore: registered new interface driver cdc_ncm [ 1.738742] usbcore: registered new interface driver usb-storage [ 1.781353] Freeing initrd memory: 11780K [ 1.810235] s5m-rtc s5m-rtc: registered as rtc0 [ 1.819074] s5m-rtc s5m-rtc: setting system clock to 2024-09-19T18:35:09 UTC (1726770909) [ 1.827607] i2c_dev: i2c /dev entries driver [ 1.837850] syscon-poweroff 10040000.system-controller:syscon-poweroff: pm_power_off already claimed for psci_sys_poweroff [ 1.847619] syscon-poweroff: probe of 10040000.system-controller:syscon-poweroff failed with error -16 [ 1.858831] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found [ 1.870054] device-mapper: uevent: version 1.0.3 [ 1.873537] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 1.882510] cpu cpu0: OPP table can't be empty [ 1.887476] failed to register cpuidle driver [ 1.890768] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver [ 1.899028] sdhci: Secure Digital Host Controller Interface driver [ 1.904119] sdhci: Copyright(c) Pierre Ossman [ 1.912108] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.919777] ledtrig-cpu: registered to indicate activity on CPUs [ 1.925112] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 1.931717] usbcore: registered new interface driver usbhid [ 1.936552] usbhid: USB HID core driver [ 1.947325] NET: Registered PF_INET6 protocol family [ 1.951958] Segment Routing with IPv6 [ 1.954685] In-situ OAM (IOAM) with IPv6 [ 1.958723] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.965133] NET: Registered PF_PACKET protocol family [ 1.969774] can: controller area network core [ 1.974261] NET: Registered PF_CAN protocol family [ 1.979044] can: raw protocol [ 1.982118] can: broadcast manager protocol [ 1.986340] can: netlink gateway - max_hops=1 [ 1.991028] Key type dns_resolver registered [ 1.995709] ThumbEE CPU extension supported. [ 1.999447] Registering SWP/SWPB emulation handler [ 2.004794] Loading compiled-in X.509 certificates [ 2.033098] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 2.039148] clk: Not disabling unused clocks [ 2.046300] Freeing unused kernel image (initmem) memory: 2048K [ 2.052430] Run /init as init process [ 2.054713] with arguments: [ 2.054718] /init [ 2.054724] with environment: [ 2.054728] HOME=/ [ 2.054733] TERM=linux [ 3.480476] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator [ 3.487614] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator [ 3.502577] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator [ 3.514402] phy phy-12130000.phy.9: phy_power_on was called before phy_init [ 3.519999] exynos-ehci 12110000.usb: EHCI Host Controller [ 3.541522] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 [ 3.549205] Synopsys Designware Multimedia Card Interface Driver [ 3.560607] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator [ 3.616175] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 [ 3.622025] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator [ 3.622844] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. [ 3.628415] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator [ 3.635640] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. [ 3.649451] phy phy-12130000.phy.9: phy_power_on was called before phy_init [ 3.656800] exynos-ohci 12120000.usb: USB Host Controller [ 3.662255] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 [ 3.671443] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 [ 3.677155] hub 1-0:1.0: USB hub found [ 3.680105] hub 1-0:1.0: 3 ports detected [ 3.701743] dwmmc_exynos 12200000.mmc: Using internal DMA controller. [ 3.707109] dwmmc_exynos 12200000.mmc: Version ID is 241a [ 3.712702] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo [ 3.722359] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 [ 3.728314] dwmmc_exynos 12220000.mmc: Using internal DMA controller. [ 3.734761] dwmmc_exynos 12220000.mmc: Version ID is 241a [ 3.740252] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 127,32 bit host data width,128 deep fifo [ 3.764329] s2mps11-clk s5m8767-clk: DMA mask not set [ 3.775244] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled [ 3.780976] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 3.789865] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 3.809026] mmc_host mmc0: card is polling. [ 3.810486] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling [ 3.811929] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 3.836011] hub 2-0:1.0: USB hub found [ 3.838958] hub 2-0:1.0: 3 ports detected [ 3.839717] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 3.842686] s3c-rtc 101e0000.rtc: registered as rtc1 [ 3.903441] scsi host0: ahci-dwc [ 3.904172] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 3.905703] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 128 [ 3.915293] mmc1: new high speed SDHC card at address aaaa [ 3.970594] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 3.991124] mmc0: new DDR MMC card at address 0001 [ 4.001893] mmcblk1: mmc1:aaaa SU04G 3.69 GiB [ 4.011040] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB [ 4.084112] mmcblk0: p1 p2 p3 p4 [ 4.088351] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB [ 4.139374] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB [ 4.158260] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) [ 4.440692] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.447258] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 [ 4.452619] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) [ 4.467786] ata1.00: configured for UDMA/133 [ 4.471496] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 [ 4.480115] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 4.486436] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 4.499727] sd 0:0:0:0: [sda] Write Protect is off [ 4.503199] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.503324] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.512384] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 4.551093] sda: sda1 sda2 < sda5 > [ 4.554256] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.565350] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) [ 4.618121] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host [ 4.625463] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 4.629642] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 [ 4.642080] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 [ 4.650465] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 [ 4.663956] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 4.668662] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 [ 4.676213] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed [ 4.689703] hub 3-0:1.0: USB hub found [ 4.692251] hub 3-0:1.0: 1 port detected [ 4.696865] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.705277] hub 4-0:1.0: USB hub found [ 4.708133] hub 4-0:1.0: 1 port detected [ 7.140660] random: crng init done [ 11.154317] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 11.466127] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: disabled. [ 15.140719] usb3503 usb-hub: switched to HUB mode [ 15.144055] usb3503 usb-hub: usb3503_probe: probed in hub mode [ 15.150618] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled [ 15.214717] mc: Linux media interface: v0.10 [ 15.252368] s5p-secss 10830000.sss: s5p-sss driver registered [ 15.389599] videodev: Linux video capture interface: v2.00 [ 15.502450] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 15.593269] s5p-mfc 11000000.codec: Adding to iommu group 0 [ 15.624128] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers [ 15.650814] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 [ 15.658819] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 [ 15.667965] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel [ 15.697759] exynos-gsc 13e00000.gsc: Adding to iommu group 1 [ 15.730780] s5p-mfc 11000000.codec: decoder registered as /dev/video0 [ 15.735507] exynos-gsc 13e10000.gsc: Adding to iommu group 2 [ 15.742323] s5p-mfc 11000000.codec: encoder registered as /dev/video2 [ 15.748808] hub 1-3:1.0: USB hub found [ 15.751086] exynos-gsc 13e20000.gsc: Adding to iommu group 3 [ 15.757741] hub 1-3:1.0: 3 ports detected [ 15.758660] exynos-gsc 13e30000.gsc: Adding to iommu group 4 [ 15.854500] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s [ 15.873896] wm8994 3-001a: Device is not a WM8994, ID is 0 [ 15.879384] wm8994: probe of 3-001a failed with error -22 [ 16.180685] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci [ 16.333609] hub 1-3.2:1.0: USB hub found [ 16.338571] hub 1-3.2:1.0: 4 ports detected [ 16.514401] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 [ 16.522072] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 [ 16.530813] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel [ 16.544635] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 [ 16.552388] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 [ 16.561044] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel [ 16.750709] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci [ 16.903793] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random [ 17.562542] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) [ 17.576787] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) [ 17.586587] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 62:1b:02:f6:32:6e [ 17.598576] usbcore: registered new device driver onboard-usb-hub [ 17.606071] usb 1-3.2.4: USB disconnect, device number 4 [ 17.610324] asix 1-3.2.4:1.0 eth0: unregister 'asix' usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet [ 17.773441] hub 1-3.2:1.0: USB hub found [ 17.776415] hub 1-3.2:1.0: 4 ports detected [ 17.789956] hub 1-3.2:1.0: USB hub found [ 17.792977] hub 1-3.2:1.0: 4 ports detected [ 18.110737] usb 1-3.2.4: new high-speed USB device number 5 using exynos-ehci [ 18.952704] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:005:10] driver [Asix Electronics AX88772A] (irq=POLL) [ 18.967575] Asix Electronics AX88772A usb-001:005:10: attached PHY driver (mii_bus:phy_addr=usb-001:005:10, irq=POLL) [ 18.977361] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 62:1b:02:f6:32:6e [ 19.482269] EXT4-fs (dm-0): re-mounted. Quota mode: disabled. [ 21.447554] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 21.499338] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: disabled. [ 21.595928] Adding 1949692k swap on /dev/mapper/arndale--lakeside--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 23.361382] xenbr0: port 1(eth0) entered blocking state [ 23.365239] xenbr0: port 1(eth0) entered disabled state [ 23.370738] device eth0 entered promiscuous mode [ 23.380579] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode [ 25.600458] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off [ 25.606466] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 25.612874] xenbr0: port 1(eth0) entered blocking state [ 25.618039] xenbr0: port 1(eth0) entered forwarding state [ 25.624474] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready [ 28.152455] platform sound: deferred probe pending