[ 0.000000] microcode: microcode updated early to revision 0x42e, date = 2019-03-14 [ 0.000000] Linux version 6.1.0-25-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.106-3 (2024-08-26) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007de2bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1800.084 MHz processor [ 0.000920] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000925] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000936] last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.001075] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001723] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved [ 0.001733] last_pfn = 0x7de2c max_arch_pfn = 0x400000000 [ 0.018539] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] [ 0.018564] Using GB pages for direct mapping [ 0.018806] RAMDISK: [mem 0x3310b000-0x3587cfff] [ 0.018814] ACPI: Early table checksum verification disabled [ 0.018818] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.018825] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.018834] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.018842] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.018848] ACPI: FACS 0x000000007E1D8080 000040 [ 0.018852] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.018857] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.018862] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.018867] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.018872] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.018877] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.018883] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.018888] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.018893] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.018898] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.018903] ACPI: DMAR 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.018908] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.018912] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.018915] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.018916] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.018917] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.018919] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.018920] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.018922] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.018923] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.018924] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.018926] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.018927] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.018928] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.018930] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.018931] ACPI: Reserving DMAR table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.018933] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.019002] No NUMA configuration found [ 0.019003] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] [ 0.019019] NODE_DATA(0) allocated [mem 0x27ffd5000-0x27fffffff] [ 0.019480] Zone ranges: [ 0.019482] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.019485] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.019487] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.019489] Device empty [ 0.019491] Movable zone start for each node [ 0.019495] Early memory node ranges [ 0.019496] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.019498] node 0: [mem 0x0000000000100000-0x000000007de2bfff] [ 0.019500] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.019504] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.019512] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.019569] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.027800] On node 0, zone Normal: 8660 pages in unavailable ranges [ 0.028095] ACPI: PM-Timer IO Port: 0x408 [ 0.028108] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.028110] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.028111] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.028113] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.028125] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.028131] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.028135] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028138] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.028145] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028147] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.028153] TSC deadline timer available [ 0.028155] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.028176] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028179] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.028180] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.028182] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.028183] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.028185] PM: hibernation: Registered nosave memory: [mem 0x7de2c000-0x7debafff] [ 0.028186] PM: hibernation: Registered nosave memory: [mem 0x7debb000-0x7dfc3fff] [ 0.028188] PM: hibernation: Registered nosave memory: [mem 0x7dfc4000-0x7e1e0fff] [ 0.028189] PM: hibernation: Registered nosave memory: [mem 0x7e1e1000-0x7f36afff] [ 0.028190] PM: hibernation: Registered nosave memory: [mem 0x7f36b000-0x7f7fffff] [ 0.028191] PM: hibernation: Registered nosave memory: [mem 0x7f800000-0x7fffffff] [ 0.028193] PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff] [ 0.028194] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.028195] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff] [ 0.028196] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff] [ 0.028197] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.028200] [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.028202] Booting paravirtualized kernel on bare hardware [ 0.028205] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.035485] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.035882] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.035891] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.035895] pcpu-alloc: [0] 0 1 2 3 [ 0.035935] Fallback order for Node 0: 0 [ 0.035940] Built 1 zonelists, mobility grouping on. Total pages: 2055603 [ 0.035942] Policy zone: Normal [ 0.035944] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.036013] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64", will be passed to user space. [ 0.036027] random: crng init done [ 0.037079] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.037647] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.037738] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.037750] software IO TLB: area num 4. [ 0.079451] Memory: 2086372K/8353556K available (14342K kernel code, 2335K rwdata, 9072K rodata, 2796K init, 17396K bss, 305204K reserved, 0K cma-reserved) [ 0.079665] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.079686] Kernel/User page tables isolation: enabled [ 0.079741] ftrace: allocating 40246 entries in 158 pages [ 0.090075] ftrace: allocated 158 pages with 5 groups [ 0.091021] Dynamic Preempt: voluntary [ 0.091065] rcu: Preemptible hierarchical RCU implementation. [ 0.091066] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.091068] Trampoline variant of Tasks RCU enabled. [ 0.091069] Rude variant of Tasks RCU enabled. [ 0.091070] Tracing variant of Tasks RCU enabled. [ 0.091071] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.091072] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.098502] NR_IRQS: 524544, nr_irqs: 864, preallocated irqs: 16 [ 0.098710] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.103283] Console: colour VGA+ 80x25 [ 1.027700] printk: console [ttyS0] enabled [ 1.031900] ACPI: Core revision 20220331 [ 1.036548] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 1.045688] APIC: Switch to symmetric I/O mode setup [ 1.050668] DMAR: Host address width 46 [ 1.054517] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 1.059843] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de [ 1.067765] DMAR: RMRR base: 0x0000007de91000 end: 0x0000007de9dfff [ 1.074040] DMAR: ATSR flags: 0x0 [ 1.077360] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 1.083633] DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0 [ 1.089992] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0 [ 1.096344] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 1.101745] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 1.110876] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 1.116271] x2apic enabled [ 1.118999] Switched APIC routing to cluster x2apic. [ 1.124514] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.149683] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f278e0c8d, max_idle_ns: 440795250957 ns [ 1.160195] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.16 BogoMIPS (lpj=7200336) [ 1.164226] CPU0: Thermal monitoring enabled (TM1) [ 1.168278] process: using mwait in idle threads [ 1.172196] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 1.176193] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 1.180196] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.184195] Spectre V2 : Mitigation: Retpolines [ 1.188193] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.192193] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.196193] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 1.200195] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.204194] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 1.208194] MDS: Mitigation: Clear CPU buffers [ 1.212193] MMIO Stale Data: Unknown: No mitigations [ 1.216198] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.220193] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.224193] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.228194] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.232193] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.260746] Freeing SMP alternatives memory: 36K [ 1.264194] pid_max: default: 32768 minimum: 301 [ 1.268227] LSM: Security Framework initializing [ 1.272212] landlock: Up and running. [ 1.276193] Yama: disabled by default; enable with sysctl kernel.yama.* [ 1.280225] AppArmor: AppArmor initialized [ 1.284195] TOMOYO Linux initialized [ 1.288200] LSM support for eBPF active [ 1.292240] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.296209] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.304713] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2403 v2 @ 1.80GHz (family: 0x6, model: 0x3e, stepping: 0x4) [ 1.308381] cblist_init_generic: Setting adjustable number of callback queues. [ 1.312195] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.316225] cblist_init_generic: Setting adjustable number of callback queues. [ 1.320194] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.324216] cblist_init_generic: Setting adjustable number of callback queues. [ 1.328194] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.332214] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 1.336195] ... version: 3 [ 1.340193] ... bit width: 48 [ 1.344193] ... generic registers: 8 [ 1.348193] ... value mask: 0000ffffffffffff [ 1.352193] ... max period: 00007fffffffffff [ 1.356193] ... fixed-purpose events: 3 [ 1.360193] ... event mask: 00000007000000ff [ 1.364426] signal: max sigframe size: 1776 [ 1.368218] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 1.372226] rcu: Hierarchical SRCU implementation. [ 1.376194] rcu: Max phase no-delay instances is 1000. [ 1.380867] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.384288] smp: Bringing up secondary CPUs ... [ 1.388343] x86: Booting SMP configuration: [ 1.392199] .... node #0, CPUs: #1 #2 #3 [ 1.407586] smp: Brought up 1 node, 4 CPUs [ 1.412195] smpboot: Max logical packages: 1 [ 1.416194] smpboot: Total of 4 processors activated (14400.67 BogoMIPS) [ 1.440239] node 0 deferred pages initialised in 20ms [ 1.444657] devtmpfs: initialized [ 1.448275] x86/mm: Memory block size: 128MB [ 1.453237] ACPI: PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 1.456245] ACPI: PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 1.460350] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.464207] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.468255] pinctrl core: initialized pinctrl subsystem [ 1.473102] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.476472] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 1.480347] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.484345] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.488204] audit: initializing netlink subsys (disabled) [ 1.492209] audit: type=2000 audit(1726813961.404:1): state=initialized audit_enabled=0 res=1 [ 1.492345] thermal_sys: Registered thermal governor 'fair_share' [ 1.496198] thermal_sys: Registered thermal governor 'bang_bang' [ 1.500194] thermal_sys: Registered thermal governor 'step_wise' [ 1.504194] thermal_sys: Registered thermal governor 'user_space' [ 1.508194] thermal_sys: Registered thermal governor 'power_allocator' [ 1.512211] cpuidle: using governor ladder [ 1.520198] cpuidle: using governor menu [ 1.524168] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 1.524195] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.528295] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 1.532196] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 1.536203] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 1.540617] PCI: Using configuration type 1 for base access [ 1.544292] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 1.549513] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.552254] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 1.556196] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 1.564196] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 1.572194] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 1.576349] ACPI: Added _OSI(Module Device) [ 1.580197] ACPI: Added _OSI(Processor Device) [ 1.584194] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.592195] ACPI: Added _OSI(Processor Aggregator Device) [ 1.712311] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.741847] ACPI: Interpreter enabled [ 1.744216] ACPI: PM: (supports S0 S1 S4 S5) [ 1.748194] ACPI: Using IOAPIC for interrupt routing [ 1.756300] HEST: Table parsing has been initialized. [ 1.760319] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 1.764198] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.776194] PCI: Using E820 reservations for host bridge windows [ 1.780746] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.788302] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PRAD], AE_NOT_FOUND (20220331/psargs-330) [ 1.792197] ACPI Error: Aborting method \_GPE._L24 due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 1.796202] ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_L24] (20220331/evgpe-511) [ 1.800192] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.804192] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.812285] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR] [ 1.820344] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability] [ 1.828194] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.836550] PCI host bridge to bus 0000:00 [ 1.840196] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.848194] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.856194] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.860194] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.868194] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 1.876194] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.884194] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.892194] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.900194] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.904224] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.908278] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.916319] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.924293] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.928362] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.936292] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.940361] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.948232] pci 0000:00:03.0: enabling Extended Tags [ 1.952259] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.956348] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.964211] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.972338] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.976210] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.984330] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 1.992210] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 1.996328] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 2.004210] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 2.008330] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 2.016210] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 2.024328] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 2.028210] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 2.036330] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 2.040213] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 2.048329] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 2.056210] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 2.060327] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 2.068323] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 2.072319] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 2.080206] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 2.088344] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 2.092314] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 2.100336] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 2.104212] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 2.112262] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 2.116283] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 2.124212] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 2.132262] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 2.136295] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 2.144210] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 2.148284] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.156299] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 2.160293] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.168223] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 2.172195] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 2.180297] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 2.184293] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.192218] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 2.196195] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 2.204322] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 2.208210] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 2.216286] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.220297] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.228339] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 2.232409] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 2.240207] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 2.244200] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 2.252200] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 2.256200] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 2.264200] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 2.268201] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 2.272238] pci 0000:00:1f.2: PME# supported from D3hot [ 2.280283] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 2.284211] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 2.292217] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 2.296270] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 2.304214] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 2.312355] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.316245] pci 0000:00:01.1: PCI bridge to [bus 02] [ 2.320244] pci 0000:00:03.0: PCI bridge to [bus 03] [ 2.324276] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 2.332216] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 2.340208] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 2.348203] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 2.352220] pci 0000:04:00.0: enabling Extended Tags [ 2.356300] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 2.364194] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 2.376450] pci 0000:00:11.0: PCI bridge to [bus 04] [ 2.380197] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 2.384202] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 2.392291] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 2.400229] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 2.404231] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 2.412212] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 2.416383] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 2.424417] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 2.428197] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 2.436196] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 2.444295] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 2.448229] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 2.456231] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 2.460212] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 2.468380] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 2.472409] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 2.476197] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 2.484196] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 2.492216] pci_bus 0000:07: extended config space not accessible [ 2.496219] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 2.504210] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 2.508202] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 2.516202] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 2.524240] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.532304] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 2.536198] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 2.544200] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 2.552194] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 2.560194] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 2.568194] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 2.576194] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 2.584194] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 2.596194] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 2.604194] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 2.612194] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 2.624983] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 2.628198] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.640212] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 2.648194] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 2.656261] PCI host bridge to bus 0000:ff [ 2.660195] pci_bus 0000:ff: root bus resource [bus ff] [ 2.664208] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 2.672273] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 2.676262] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 2.684254] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 2.688257] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 2.696255] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 2.700259] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 2.708251] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 2.712252] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 2.720253] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 2.728254] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 2.732251] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 2.740254] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 2.744256] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 2.752269] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 2.756282] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 2.764276] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 2.768276] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 2.776275] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 2.780275] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 2.788278] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 2.792276] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 2.800288] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 2.804277] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 2.812277] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 2.816277] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 2.824277] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 2.828275] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 2.836274] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 2.840253] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 2.848258] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 2.852254] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 2.860256] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 2.864252] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 2.872251] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 2.880412] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 2.884247] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 2.892244] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 2.896244] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 2.904244] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 2.908243] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 2.916255] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 2.920244] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 2.929815] iommu: Default domain type: Translated [ 2.932195] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.940294] pps_core: LinuxPPS API ver. 1 registered [ 2.944194] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.952197] PTP clock support registered [ 2.956132] EDAC MC: Ver: 3.0.0 [ 2.960451] NetLabel: Initializing [ 2.963859] NetLabel: domain hash size = 128 [ 2.968196] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 2.972216] NetLabel: unlabeled traffic allowed by default [ 2.980194] PCI: Using ACPI for IRQ routing [ 2.991161] PCI: pci_cache_line_size set to 64 bytes [ 2.991286] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] [ 2.991289] e820: reserve RAM buffer [mem 0x7de2c000-0x7fffffff] [ 2.992233] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 2.996192] pci 0000:07:01.0: vgaarb: bridge control possible [ 2.996192] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.012202] vgaarb: loaded [ 3.016921] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 3.024194] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 3.030255] clocksource: Switched to clocksource tsc-early [ 3.033889] VFS: Disk quotas dquot_6.6.0 [ 3.037832] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.044900] AppArmor: AppArmor Filesystem Enabled [ 3.049635] pnp: PnP ACPI init [ 3.052840] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 3.059459] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 3.066074] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 3.072686] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 3.079427] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 3.086530] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 3.092456] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 3.099732] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 3.105852] pnp 00:07: [dma 0 disabled] [ 3.106091] pnp 00:08: [dma 0 disabled] [ 3.106369] system 00:09: [io 0x0400-0x0453] has been reserved [ 3.112292] system 00:09: [io 0x0458-0x047f] has been reserved [ 3.118208] system 00:09: [io 0x1180-0x119f] has been reserved [ 3.124128] system 00:09: [io 0x0500-0x057f] has been reserved [ 3.130049] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 3.136660] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 3.143620] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 3.150337] system 00:0a: [io 0x0454-0x0457] has been reserved [ 3.156532] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 3.163764] pnp: PnP ACPI: found 12 devices [ 3.174466] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.183430] NET: Registered PF_INET protocol family [ 3.188497] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 3.198837] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 3.207406] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.215239] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 3.223539] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 3.231331] TCP: Hash tables configured (established 65536 bind 65536) [ 3.237956] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 3.245510] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.252337] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.259632] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.265302] NET: Registered PF_XDP protocol family [ 3.270114] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.275086] pci 0000:00:01.1: PCI bridge to [bus 02] [ 3.280060] pci 0000:00:03.0: PCI bridge to [bus 03] [ 3.285034] pci 0000:00:11.0: PCI bridge to [bus 04] [ 3.290001] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 3.296100] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.303846] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 3.308819] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 3.314917] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 3.321708] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 3.326675] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 3.332770] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 3.339560] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 3.344530] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 3.351314] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.359057] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 3.365240] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 3.371418] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 3.377598] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 3.383775] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.390649] pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.397522] pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.404479] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.411440] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 3.417012] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.424232] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 3.429805] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 3.436069] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 3.441640] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 3.447907] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 3.454173] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.461391] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 3.467571] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 3.473748] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 3.479927] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 3.486108] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.492978] pci_bus 0000:07: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.499852] pci_bus 0000:07: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.506810] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.513863] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 3.545565] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 24055 usecs [ 3.577552] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 23993 usecs [ 3.585053] PCI: CLS 64 bytes, default 64 [ 3.589108] DMAR: No SATC found [ 3.589151] Trying to unpack rootfs image as initramfs... [ 3.592252] DMAR: dmar0: Using Queued invalidation [ 3.592329] pci 0000:00:00.0: Adding to iommu group 0 [ 3.607555] pci 0000:00:01.0: Adding to iommu group 1 [ 3.612635] pci 0000:00:01.1: Adding to iommu group 2 [ 3.617717] pci 0000:00:03.0: Adding to iommu group 3 [ 3.622799] pci 0000:00:04.0: Adding to iommu group 4 [ 3.627879] pci 0000:00:04.1: Adding to iommu group 5 [ 3.632959] pci 0000:00:04.2: Adding to iommu group 6 [ 3.638040] pci 0000:00:04.3: Adding to iommu group 7 [ 3.643123] pci 0000:00:04.4: Adding to iommu group 8 [ 3.648199] pci 0000:00:04.5: Adding to iommu group 9 [ 3.653283] pci 0000:00:04.6: Adding to iommu group 10 [ 3.658454] pci 0000:00:04.7: Adding to iommu group 11 [ 3.663620] pci 0000:00:05.0: Adding to iommu group 12 [ 3.668784] pci 0000:00:05.2: Adding to iommu group 13 [ 3.673949] pci 0000:00:05.4: Adding to iommu group 14 [ 3.679116] pci 0000:00:11.0: Adding to iommu group 15 [ 3.684301] pci 0000:00:16.0: Adding to iommu group 16 [ 3.689478] pci 0000:00:16.1: Adding to iommu group 16 [ 3.694655] pci 0000:00:1a.0: Adding to iommu group 17 [ 3.699817] pci 0000:00:1c.0: Adding to iommu group 18 [ 3.704985] pci 0000:00:1c.1: Adding to iommu group 19 [ 3.710148] pci 0000:00:1d.0: Adding to iommu group 20 [ 3.715316] pci 0000:00:1e.0: Adding to iommu group 21 [ 3.720531] pci 0000:00:1f.0: Adding to iommu group 22 [ 3.725696] pci 0000:00:1f.2: Adding to iommu group 22 [ 3.730860] pci 0000:00:1f.3: Adding to iommu group 22 [ 3.736026] pci 0000:00:1f.6: Adding to iommu group 22 [ 3.741201] pci 0000:04:00.0: Adding to iommu group 23 [ 3.746365] pci 0000:05:00.0: Adding to iommu group 24 [ 3.751531] pci 0000:06:00.0: Adding to iommu group 25 [ 3.756676] pci 0000:07:01.0: Adding to iommu group 21 [ 3.761859] pci 0000:ff:08.0: Adding to iommu group 26 [ 3.767036] pci 0000:ff:09.0: Adding to iommu group 27 [ 3.772251] pci 0000:ff:0a.0: Adding to iommu group 28 [ 3.777418] pci 0000:ff:0a.1: Adding to iommu group 28 [ 3.782590] pci 0000:ff:0a.2: Adding to iommu group 28 [ 3.787759] pci 0000:ff:0a.3: Adding to iommu group 28 [ 3.792951] pci 0000:ff:0b.0: Adding to iommu group 29 [ 3.798124] pci 0000:ff:0b.3: Adding to iommu group 29 [ 3.803316] pci 0000:ff:0c.0: Adding to iommu group 30 [ 3.808487] pci 0000:ff:0c.1: Adding to iommu group 30 [ 3.813679] pci 0000:ff:0d.0: Adding to iommu group 31 [ 3.818851] pci 0000:ff:0d.1: Adding to iommu group 31 [ 3.824038] pci 0000:ff:0e.0: Adding to iommu group 32 [ 3.829211] pci 0000:ff:0e.1: Adding to iommu group 32 [ 3.834382] pci 0000:ff:0f.0: Adding to iommu group 33 [ 3.839553] pci 0000:ff:0f.1: Adding to iommu group 34 [ 3.844718] pci 0000:ff:0f.2: Adding to iommu group 35 [ 3.849885] pci 0000:ff:0f.3: Adding to iommu group 36 [ 3.855056] pci 0000:ff:0f.4: Adding to iommu group 37 [ 3.860222] pci 0000:ff:0f.5: Adding to iommu group 38 [ 3.865388] pci 0000:ff:10.0: Adding to iommu group 39 [ 3.870553] pci 0000:ff:10.1: Adding to iommu group 40 [ 3.875714] pci 0000:ff:10.2: Adding to iommu group 41 [ 3.880881] pci 0000:ff:10.3: Adding to iommu group 42 [ 3.886048] pci 0000:ff:10.4: Adding to iommu group 43 [ 3.891211] pci 0000:ff:10.5: Adding to iommu group 44 [ 3.896379] pci 0000:ff:10.6: Adding to iommu group 45 [ 3.901550] pci 0000:ff:10.7: Adding to iommu group 46 [ 3.906774] pci 0000:ff:13.0: Adding to iommu group 47 [ 3.911953] pci 0000:ff:13.1: Adding to iommu group 47 [ 3.917131] pci 0000:ff:13.4: Adding to iommu group 47 [ 3.922302] pci 0000:ff:13.5: Adding to iommu group 47 [ 3.927506] pci 0000:ff:16.0: Adding to iommu group 48 [ 3.932677] pci 0000:ff:16.1: Adding to iommu group 48 [ 3.937854] pci 0000:ff:16.2: Adding to iommu group 48 [ 3.946874] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 3.953328] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.959769] software IO TLB: mapped [mem 0x0000000079e2c000-0x000000007de2c000] (64MB) [ 3.968246] Initialise system trusted keyrings [ 3.972715] Key type blacklist registered [ 3.976812] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 3.985112] zbud: loaded [ 3.987977] integrity: Platform Keyring initialized [ 3.992868] integrity: Machine keyring initialized [ 3.997661] Key type asymmetric registered [ 4.001758] Asymmetric key parser 'x509' registered [ 4.034882] Freeing initrd memory: 40392K [ 4.046269] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 4.052046] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 4.059484] io scheduler mq-deadline registered [ 4.066456] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.073270] Monitor-Mwait will be used to enter C-1 state [ 4.073283] Monitor-Mwait will be used to enter C-2 state [ 4.073290] ACPI: \_SB_.SCK0.C000: Found 2 idle states [ 4.083456] ERST: Error Record Serialization Table (ERST) support is initialized. [ 4.090946] pstore: Registered erst as persistent store backend [ 4.097030] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.103468] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.111566] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.119783] Linux agpgart interface v0.103 [ 4.124023] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 4.133161] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 4.140038] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 4.149837] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.154806] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.160044] mousedev: PS/2 mouse device common for all mice [ 4.165658] rtc_cmos 00:02: RTC can wake from S4 [ 4.170582] rtc_cmos 00:02: registered as rtc0 [ 4.175064] rtc_cmos 00:02: setting system clock to 2024-09-20T06:32:45 UTC (1726813965) [ 4.183190] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.191009] intel_pstate: Intel P-state driver initializing [ 4.196909] ledtrig-cpu: registered to indicate activity on CPUs [ 4.221399] NET: Registered PF_INET6 protocol family [ 4.235442] Segment Routing with IPv6 [ 4.239126] In-situ OAM (IOAM) with IPv6 [ 4.243085] mip6: Mobile IPv6 [ 4.246062] NET: Registered PF_PACKET protocol family [ 4.251199] mpls_gso: MPLS GSO support [ 4.255469] microcode: sig=0x306e4, pf=0x8, revision=0x42e [ 4.261001] microcode: Microcode Update Driver: v2.2. [ 4.261010] IPI shorthand broadcast: enabled [ 4.270363] sched_clock: Marking stable (3280878604, 989449734)->(4641740201, -371411863) [ 4.278806] registered taskstats version 1 [ 4.282923] Loading compiled-in X.509 certificates [ 4.327969] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.336693] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 4.347355] zswap: loaded using pool lzo/zbud [ 4.351964] Key type .fscrypt registered [ 4.355896] Key type fscrypt-provisioning registered [ 4.361261] pstore: Using crash dump compression: deflate [ 4.373937] Key type encrypted registered [ 4.377967] AppArmor: AppArmor sha1 policy hashing enabled [ 4.383462] ima: No TPM chip found, activating TPM-bypass! [ 4.388946] ima: Allocated hash algorithm: sha256 [ 4.393670] ima: No architecture policies found [ 4.398214] evm: Initialising EVM extended attributes: [ 4.403349] evm: security.selinux [ 4.406666] evm: security.SMACK64 (disabled) [ 4.410938] evm: security.SMACK64EXEC (disabled) [ 4.415559] evm: security.SMACK64TRANSMUTE (disabled) [ 4.420612] evm: security.SMACK64MMAP (disabled) [ 4.425229] evm: security.apparmor [ 4.428634] evm: security.ima [ 4.431608] evm: security.capability [ 4.435187] evm: HMAC attrs: 0x1 [ 4.609542] clk: Disabling unused clocks [ 4.615148] Freeing unused decrypted memory: 2036K [ 4.620644] Freeing unused kernel image (initmem) memory: 2796K [ 4.626669] Write protecting the kernel read-only data: 26624k [ 4.633307] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 4.640261] Freeing unused kernel image (rodata/data gap) memory: 1168K [ 4.733643] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.740084] x86/mm: Checking user space page tables [ 4.820354] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.826794] Run /init as init process [ 4.830464] with arguments: [ 4.830466] /init [ 4.830467] with environment: [ 4.830468] HOME=/ [ 4.830469] TERM=linux [ 4.830470] BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 [ 4.993472] tsc: Refined TSC clocksource calibration: 1799.999 MHz [ 4.999674] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 5.010011] clocksource: Switched to clocksource tsc [ 5.052331] SCSI subsystem initialized [ 5.056374] e1000e: Intel(R) PRO/1000 Network Driver [ 5.061354] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 5.067560] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.077249] ACPI: bus type USB registered [ 5.081332] usbcore: registered new interface driver usbfs [ 5.086836] usbcore: registered new interface driver hub [ 5.092164] usbcore: registered new device driver usb [ 5.100860] libata version 3.00 loaded. [ 5.107604] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.112856] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.113196] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 5.120291] ehci-pci 0000:00:1a.0: debug port 2 [ 5.128967] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 5.134841] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 5.147623] i2c i2c-0: 1/6 memory slots populated (from DMI) [ 5.153296] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 5.157478] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.168615] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.176882] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.184108] usb usb1: Product: EHCI Host Controller [ 5.188992] usb usb1: Manufacturer: Linux 6.1.0-25-amd64 ehci_hcd [ 5.195090] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.199606] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a6 [ 5.207628] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 5.214592] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.214595] hub 1-0:1.0: USB hub found [ 5.221672] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.225072] hub 1-0:1.0: 2 ports detected [ 5.238717] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.243965] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.251374] ehci-pci 0000:00:1d.0: debug port 2 [ 5.256579] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 5.259868] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 5.263058] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 5.275086] ahci 0000:00:1f.2: version 3.0 [ 5.276525] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 5.284954] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 5.285520] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.293268] isci 0000:04:00.0: OEM parameter table found in OROM [ 5.293272] isci 0000:04:00.0: OEM SAS parameters (version: 1.0) loaded (platform) [ 5.293663] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 5.299413] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.299693] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 5.308044] scsi host0: isci [ 5.312846] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.347289] usb usb2: Product: EHCI Host Controller [ 5.350884] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a7 [ 5.352168] usb usb2: Manufacturer: Linux 6.1.0-25-amd64 ehci_hcd [ 5.360089] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 5.362949] scsi host1: ahci [ 5.366172] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.366434] scsi host2: ahci [ 5.366507] hub 2-0:1.0: USB hub found [ 5.366519] hub 2-0:1.0: 2 ports detected [ 5.373130] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.376172] scsi host3: ahci [ 5.400992] scsi host4: ahci [ 5.404115] scsi host5: ahci [ 5.407212] scsi host6: ahci [ 5.410163] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 35 [ 5.417563] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 35 [ 5.424953] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 35 [ 5.432353] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 35 [ 5.439745] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 35 [ 5.447138] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 35 [ 5.497521] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.629511] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.662253] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.670453] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.677997] hub 1-1:1.0: USB hub found [ 5.681917] hub 1-1:1.0: 6 ports detected [ 5.767144] ata2: SATA link down (SStatus 0 SControl 300) [ 5.772571] ata3: SATA link down (SStatus 0 SControl 300) [ 5.778001] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.784212] ata5: SATA link down (SStatus 0 SControl 300) [ 5.789677] ata6: SATA link down (SStatus 0 SControl 300) [ 5.795116] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 5.801932] ata4: SATA link down (SStatus 0 SControl 300) [ 5.807641] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.807661] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.815455] ata1.00: configured for UDMA/133 [ 5.822788] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.823156] hub 2-1:1.0: USB hub found [ 5.827361] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 5.846159] hub 2-1:1.0: 8 ports detected [ 5.852075] e1000e 0000:05:00.0 enx002590eb25a6: renamed from eth0 [ 5.873902] e1000e 0000:06:00.0 enx002590eb25a7: renamed from eth1 [ 5.880806] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.888524] sd 1:0:0:0: [sda] Write Protect is off [ 5.893320] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.893342] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.902412] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 5.937492] sda: sda1 sda2 < sda5 > [ 5.941361] sd 1:0:0:0: [sda] Attached SCSI disk [ 5.985517] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 6.099286] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 6.107652] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.114966] usb 1-1.1: Product: Hermon USB hidmouse Device [ 6.120464] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 6.141849] hid: raw HID events driver (C) Jiri Kosina [ 6.154285] usbcore: registered new interface driver usbhid [ 6.159878] usbhid: USB HID core driver [ 6.167285] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input3 [ 6.182217] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 6.197269] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input4 [ 6.277197] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.289442] device-mapper: uevent: version 1.0.3 [ 6.294153] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 6.385605] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 7.017972] PM: Image not found (code -22) [ 7.383066] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 7.394690] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 7.592210] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 9.211739] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 9.233521] ACPI: button: Power Button [PWRB] [ 9.238233] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 9.245779] ACPI: button: Power Button [PWRF] [ 9.380709] dca service started, version 1.12.1 [ 9.420715] IPMI message handler: version 39.2 [ 9.426988] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 9.437469] ipmi device interface [ 9.445729] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 9.505464] iTCO_vendor_support: vendor-support=0 [ 9.512601] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 9.528725] ipmi_si: IPMI System Interface driver [ 9.533474] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 9.539882] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 9.547128] ipmi_si: Adding SMBIOS-specified kcs state machine [ 9.553091] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 9.559150] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 9.567218] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 9.578565] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 9.593558] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 9.602265] ipmi_si: Adding ACPI-specified kcs state machine [ 9.608410] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 9.618255] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 9.626202] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 9.631949] RAPL PMU: hw unit of domain package 2^-16 Joules [ 9.637608] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 9.666705] cryptd: max_cpu_qlen set to 1000 [ 9.671034] ACPI: bus type drm_connector registered [ 9.792353] AVX version of gcm_enc/dec engaged. [ 9.796952] AES CTR mode by8 optimization enabled [ 9.899839] mgag200 0000:07:01.0: vgaarb: deactivate vga console [ 9.910959] Console: switching to colour dummy device 80x25 [ 9.917476] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 9.924014] [drm] Initialized mgag200 1.0.0 20110418 for 0000:07:01.0 on minor 0 [ 9.938275] fbcon: mgag200drmfb (fb0) is primary device [ 9.978871] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x0703, dev_id: 0x20) [ 10.016731] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 10.067273] ipmi_ssif: IPMI SSIF Interface driver [ 10.306867] Console: switching to colour frame buffer device 128x48 [ 10.405568] mgag200 0000:07:01.0: [drm] fb0: mgag200drmfb frame buffer device [ 10.813039] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.813060] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.813065] EDAC sbridge: Seeking for: PCI ID 8086:0e60 [ 10.813071] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.813077] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.813079] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.813085] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.813087] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.813093] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.813095] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.813101] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.813103] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.813109] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.813112] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.813118] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.813120] EDAC sbridge: Seeking for: PCI ID 8086:0e68 [ 10.813125] EDAC sbridge: Seeking for: PCI ID 8086:0e79 [ 10.813130] EDAC sbridge: Seeking for: PCI ID 8086:0e6a [ 10.813135] EDAC sbridge: Seeking for: PCI ID 8086:0e6b [ 10.813140] EDAC sbridge: Seeking for: PCI ID 8086:0e6c [ 10.813145] EDAC sbridge: Seeking for: PCI ID 8086:0e6d [ 10.813150] EDAC sbridge: Seeking for: PCI ID 8086:0eb8 [ 10.813155] EDAC sbridge: Seeking for: PCI ID 8086:0ebc [ 10.813161] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.813167] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.813168] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.813175] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.813176] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.813183] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.813280] EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT) [ 10.824328] EDAC sbridge: Ver: 1.1.2 [ 10.954250] intel_rapl_common: Found RAPL domain package [ 10.959578] intel_rapl_common: Found RAPL domain core [ 10.964640] intel_rapl_common: Found RAPL domain dram [ 12.095414] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 13.273764] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 13.297383] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 13.352842] Adding 1949692k swap on /dev/mapper/fiano1--vg-swap_1. Priority:-2 extents:1 across:1949692k FS [ 13.924637] audit: type=1400 audit(1726813975.236:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1067 comm="apparmor_parser" [ 13.941078] audit: type=1400 audit(1726813975.236:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1067 comm="apparmor_parser" [ 13.974650] audit: type=1400 audit(1726813975.288:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1066 comm="apparmor_parser" [ 14.006705] audit: type=1400 audit(1726813975.320:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1069 comm="apparmor_parser" [ 14.021956] audit: type=1400 audit(1726813975.320:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1069 comm="apparmor_parser" [ 14.036904] audit: type=1400 audit(1726813975.324:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1069 comm="apparmor_parser" [ 14.164787] audit: type=1400 audit(1726813975.476:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=1083 comm="apparmor_parser" [ 14.251018] audit: type=1400 audit(1726813975.564:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1068 comm="apparmor_parser" [ 14.268995] audit: type=1400 audit(1726813975.564:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1068 comm="apparmor_parser" [ 14.286442] audit: type=1400 audit(1726813975.568:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1068 comm="apparmor_parser" [ 17.242553] e1000e 0000:05:00.0 enx002590eb25a6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 17.252315] IPv6: ADDRCONF(NETDEV_CHANGE): enx002590eb25a6: link becomes ready