[ 0.000000] Linux version 6.1.111+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Sat Sep 21 04:56:32 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000459] tsc: Detected 2199.998 MHz processor [ 0.000895] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000898] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000905] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000907] Disabled [ 0.000908] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000911] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000950] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027795] RAMDISK: [mem 0x04000000-0x05424fff] [ 0.027804] ACPI: Early table checksum verification disabled [ 0.028403] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028414] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028451] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028499] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028516] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028532] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028547] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028563] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028579] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028595] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028612] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028628] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028644] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028660] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028681] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028697] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028713] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028729] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028745] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028761] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028777] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028793] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028804] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028806] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028807] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028808] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028809] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028810] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028811] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028812] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028813] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028814] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028815] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028816] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028817] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028818] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028819] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028820] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028821] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028822] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028823] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028824] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028868] Setting APIC routing to Xen PV. [ 0.032799] Zone ranges: [ 0.032800] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032803] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032805] Normal empty [ 0.032806] Movable zone start for each node [ 0.032807] Early memory node ranges [ 0.032807] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032809] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032811] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032816] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032852] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034415] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034420] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221901] Remapped 102 page(s) [ 0.223272] ACPI: PM-Timer IO Port: 0x408 [ 0.223327] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223330] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223331] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223333] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223334] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223336] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223337] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223339] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223367] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223380] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223384] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223410] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223414] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223483] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223498] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223500] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223501] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223503] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223508] Booting kernel on Xen [ 0.223509] Xen version: 4.20-unstable (preserve-AD) [ 0.223512] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229812] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.230096] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.230102] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.230105] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230184] xen: PV spinlocks enabled [ 0.230187] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230192] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230194] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230231] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230240] random: crng init done [ 0.230289] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230314] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231641] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231644] software IO TLB: area num 8. [ 0.291021] Memory: 389288K/524284K available (14349K kernel code, 2686K rwdata, 4584K rodata, 1580K init, 1288K bss, 134744K reserved, 0K cma-reserved) [ 0.291188] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.293665] Dynamic Preempt: voluntary [ 0.293764] rcu: Preemptible hierarchical RCU implementation. [ 0.293764] rcu: RCU event tracing is enabled. [ 0.293765] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.293767] Trampoline variant of Tasks RCU enabled. [ 0.293768] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.293769] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.304335] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.304458] xen:events: Using FIFO-based ABI [ 0.304483] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.304491] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.304499] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.304506] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.304514] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.304521] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.304528] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.304535] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.304543] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.304550] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.304558] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.304566] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.304573] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.304582] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.304590] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.304601] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.309942] Console: colour VGA+ 80x25 [ 0.324570] printk: console [tty0] enabled [ 0.325899] printk: console [hvc0] enabled [ 0.326037] ACPI: Core revision 20220331 [ 0.341522] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.341687] Xen: using vcpuop timer interface [ 0.341695] installing Xen timer for CPU 0 [ 0.341846] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.342003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199998) [ 0.342328] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.342444] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.342571] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.342719] Spectre V2 : Mitigation: Retpolines [ 0.342831] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.343181] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.343299] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.343420] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.343566] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.343683] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.343833] MDS: Mitigation: Clear CPU buffers [ 0.343946] TAA: Mitigation: Clear CPU buffers [ 0.344008] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.344173] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.344316] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.344440] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.344558] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.344676] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.362338] Freeing SMP alternatives memory: 40K [ 0.362464] pid_max: default: 32768 minimum: 301 [ 0.363025] LSM: Security Framework initializing [ 0.363147] SELinux: Initializing. [ 0.363285] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363431] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364094] cpu 0 spinlock event irq 25 [ 0.364213] VPMU disabled by hypervisor. [ 0.364648] cblist_init_generic: Setting adjustable number of callback queues. [ 0.364793] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.364949] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.365008] signal: max sigframe size: 1776 [ 0.365170] rcu: Hierarchical SRCU implementation. [ 0.365303] rcu: Max phase no-delay instances is 400. [ 0.365787] smp: Bringing up secondary CPUs ... [ 0.366122] installing Xen timer for CPU 1 [ 0.366592] cpu 1 spinlock event irq 35 [ 0.367144] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.367311] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.367497] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.368226] installing Xen timer for CPU 2 [ 0.368678] cpu 2 spinlock event irq 41 [ 0.369048] installing Xen timer for CPU 3 [ 0.369492] cpu 3 spinlock event irq 47 [ 0.369492] installing Xen timer for CPU 4 [ 0.370338] cpu 4 spinlock event irq 53 [ 0.370338] installing Xen timer for CPU 5 [ 0.371165] cpu 5 spinlock event irq 59 [ 0.371209] installing Xen timer for CPU 6 [ 0.372043] cpu 6 spinlock event irq 65 [ 0.372258] installing Xen timer for CPU 7 [ 0.372687] cpu 7 spinlock event irq 71 [ 0.373224] smp: Brought up 1 node, 8 CPUs [ 0.373349] smpboot: Max logical packages: 1 [ 0.373567] devtmpfs: initialized [ 0.373567] x86/mm: Memory block size: 128MB [ 0.374236] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.374274] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.374459] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.375007] PM: RTC time: 05:16:17, date: 2024-09-21 [ 0.375250] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.375396] xen:grant_table: Grant tables using version 1 layout [ 0.375532] Grant table initialized [ 0.375834] audit: initializing netlink subsys (disabled) [ 0.376026] audit: type=2000 audit(1726895777.942:1): state=initialized audit_enabled=0 res=1 [ 0.376078] thermal_sys: Registered thermal governor 'step_wise' [ 0.376078] thermal_sys: Registered thermal governor 'user_space' [ 0.376202] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.376625] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.377010] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.503702] PCI: Using configuration type 1 for base access [ 0.506337] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.507078] ACPI: Added _OSI(Module Device) [ 0.507164] ACPI: Added _OSI(Processor Device) [ 0.507279] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.507392] ACPI: Added _OSI(Processor Aggregator Device) [ 0.537324] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.539313] xen: registering gsi 9 triggering 0 polarity 0 [ 0.542073] ACPI: Dynamic OEM Table Load: [ 0.549791] ACPI: Interpreter enabled [ 0.549925] ACPI: PM: (supports S0 S4 S5) [ 0.550007] ACPI: Using IOAPIC for interrupt routing [ 0.550159] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.550309] PCI: Using E820 reservations for host bridge windows [ 0.550884] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.585640] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.585769] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.586009] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.586272] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.586400] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.586574] PCI host bridge to bus 0000:ff [ 0.586686] pci_bus 0000:ff: root bus resource [bus ff] [ 0.586879] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.587323] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.587749] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.588175] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.588612] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.589033] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.589454] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.589874] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.590325] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.590764] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.591188] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.591612] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.592038] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.592459] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.592892] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.593309] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.593728] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.594157] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.594414] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.594881] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.595355] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.595821] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.596298] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.596769] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.597238] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.597708] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.597708] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.597708] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.598001] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.598001] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.598001] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.599346] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.599769] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.600193] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.600622] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.601056] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.601522] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.601987] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.602354] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.602868] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.603304] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.603726] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.604153] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.604400] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.604835] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.605264] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.605688] pci_bus 0000:ff: on NUMA node 0 [ 0.609962] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.610010] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.610284] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.610626] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.610745] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.611225] PCI host bridge to bus 0000:00 [ 0.611339] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.611459] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.611579] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.611722] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.611865] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.612043] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.612679] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.613205] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.613573] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.614095] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.614481] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.614995] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.615358] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.615872] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.616249] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.616771] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.617136] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.617654] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.618025] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.618619] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.619243] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.619907] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.620104] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.620565] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.620907] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.621104] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.621566] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.621866] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.622080] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.622547] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.622909] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.623084] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.623621] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.623937] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.624433] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.624630] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.624752] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.632178] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.632734] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.632928] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.633015] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.633303] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.633855] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.634055] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.634176] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.634459] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.635012] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.635205] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.635333] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.635655] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.635851] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.636385] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.636704] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.637463] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.637656] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.637813] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.637970] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.638048] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.638205] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.638361] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.638671] pci 0000:00:1f.2: PME# supported from D3hot [ 0.638951] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.639104] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.639352] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.639729] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.639946] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.640597] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.640919] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.641224] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.641435] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.642188] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.642401] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.643108] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.643320] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.644033] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.644245] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.644939] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.645025] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.645363] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.645575] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.645858] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.646041] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.646405] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.646625] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.646745] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.646947] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.647006] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.647575] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.647787] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.648067] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.648250] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.648597] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.648798] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.648919] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.649057] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.649177] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.649729] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.649862] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.650000] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.650290] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.650580] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.650941] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.651006] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.651212] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.651432] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.651598] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.652129] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.652588] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.652713] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.652873] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.653224] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.653343] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.653548] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.653763] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.653927] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.654427] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.654892] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.655017] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.655144] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.655483] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.655874] pci 0000:09:00.0: enabling Extended Tags [ 0.656212] pci 0000:09:00.0: supports D1 D2 [ 0.656325] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.656679] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.656806] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.656959] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.657188] pci_bus 0000:0a: extended config space not accessible [ 0.657358] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.657563] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.657729] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.657895] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.658248] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.658536] pci 0000:0a:00.0: supports D1 D2 [ 0.658649] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.659085] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.659223] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.659352] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.659742] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.659942] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.660096] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.660256] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.660769] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.661006] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.661150] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.661368] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.661512] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.662070] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.662277] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.662485] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.662645] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.663157] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.663385] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.663528] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.663777] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.663920] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.664369] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.664569] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.664777] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.664944] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.665397] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.665625] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.665768] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.665984] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.666006] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.666525] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.666725] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.666933] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.667051] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.667561] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.667789] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.667932] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.668070] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.668213] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.668789] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.668914] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.669016] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.669155] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.669623] pci_bus 0000:00: on NUMA node 0 [ 0.669716] xen: registering gsi 13 triggering 1 polarity 0 [ 0.670688] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.670888] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.671080] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.671269] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.671458] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.671576] ACPI: PCI: Interrupt link LNKE disabled [ 0.671759] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.671876] ACPI: PCI: Interrupt link LNKF disabled [ 0.672064] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.672181] ACPI: PCI: Interrupt link LNKG disabled [ 0.672365] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.672482] ACPI: PCI: Interrupt link LNKH disabled [ 0.672746] xen:balloon: Initialising balloon driver [ 0.673086] iommu: Default domain type: Translated [ 0.681007] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.681194] SCSI subsystem initialized [ 0.681321] libata version 3.00 loaded. [ 0.681321] ACPI: bus type USB registered [ 0.681321] usbcore: registered new interface driver usbfs [ 0.681321] usbcore: registered new interface driver hub [ 0.681412] usbcore: registered new device driver usb [ 0.681538] pps_core: LinuxPPS API ver. 1 registered [ 0.682008] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.682158] PTP clock support registered [ 0.682293] Advanced Linux Sound Architecture Driver Initialized. [ 0.682299] NetLabel: Initializing [ 0.682417] NetLabel: domain hash size = 128 [ 0.682529] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.683024] NetLabel: unlabeled traffic allowed by default [ 0.683163] PCI: Using ACPI for IRQ routing [ 0.718491] PCI: pci_cache_line_size set to 64 bytes [ 0.719267] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.719270] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.719293] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.719293] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.719293] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.719428] vgaarb: loaded [ 0.721737] clocksource: Switched to clocksource tsc-early [ 0.721953] VFS: Disk quotas dquot_6.6.0 [ 0.722365] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.722509] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.722666] pnp: PnP ACPI init [ 0.723150] xen: registering gsi 8 triggering 1 polarity 0 [ 0.723345] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.723470] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.723588] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.723705] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.723822] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.723939] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.724072] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.724197] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.724316] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.724435] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.724554] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.724673] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.724799] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.725210] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.725331] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.725449] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.725566] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.725683] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.726128] xen: registering gsi 4 triggering 1 polarity 0 [ 0.726134] Already setup the GSI :4 [ 0.726246] pnp 00:03: [dma 0 disabled] [ 0.726560] xen: registering gsi 3 triggering 1 polarity 0 [ 0.726571] pnp 00:04: [dma 0 disabled] [ 0.727176] pnp: PnP ACPI: found 5 devices [ 0.758289] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.758444] NET: Registered PF_INET protocol family [ 0.758603] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.758965] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.759138] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.759308] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.759488] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.759659] TCP: Hash tables configured (established 4096 bind 4096) [ 0.759802] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.759923] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.760107] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.760479] RPC: Registered named UNIX socket transport module. [ 0.760605] RPC: Registered udp transport module. [ 0.760718] RPC: Registered tcp transport module. [ 0.760837] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.761353] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.761524] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.761686] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.761846] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.761992] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.762191] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.762372] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.762505] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.762668] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.762790] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.762933] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.763102] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.763250] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.763371] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.763514] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.763662] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.763806] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.763928] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.764098] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.764244] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.764388] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.764509] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.764652] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.764794] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.764942] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.765119] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.765253] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.765424] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.765596] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.765769] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.765888] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.766039] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.766217] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.766344] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.766483] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.766644] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.766763] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.766904] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.767099] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.767225] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.767363] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.767540] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.767699] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.767878] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.768045] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.768199] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.768350] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.768502] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.768653] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.768806] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.768925] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.769084] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.769230] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.769402] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.769550] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.769669] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.769787] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.769906] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.770043] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.770177] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.770297] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.770441] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.770562] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.770680] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.770795] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.770913] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.771044] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.771178] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.771295] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.771414] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.771533] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.771651] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.772208] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.772428] xen: registering gsi 19 triggering 0 polarity 1 [ 0.772455] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.781206] xen: registering gsi 18 triggering 0 polarity 1 [ 0.781224] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.796238] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 14731 usecs [ 0.796481] xen: registering gsi 18 triggering 0 polarity 1 [ 0.796487] Already setup the GSI :18 [ 0.811468] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 14690 usecs [ 0.811680] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.811886] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.811958] Unpacking initramfs... [ 0.812019] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.812109] kvm: no hardware support for 'kvm_intel' [ 0.820020] has_svm: not amd or hygon [ 0.820180] kvm: no hardware support for 'kvm_amd' [ 0.820298] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.820536] clocksource: Switched to clocksource tsc [ 0.822920] Initialise system trusted keyrings [ 0.823204] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.824720] NFS: Registering the id_resolver key type [ 0.824845] Key type id_resolver registered [ 0.824955] Key type id_legacy registered [ 0.825173] 9p: Installing v9fs 9p2000 file system support [ 0.839033] Key type asymmetric registered [ 0.839160] Asymmetric key parser 'x509' registered [ 0.839297] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.839463] io scheduler mq-deadline registered [ 0.839583] io scheduler kyber registered [ 0.840441] xen: registering gsi 16 triggering 0 polarity 1 [ 0.840472] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.841033] xen: registering gsi 16 triggering 0 polarity 1 [ 0.841039] Already setup the GSI :16 [ 0.841663] xen: registering gsi 16 triggering 0 polarity 1 [ 0.841668] Already setup the GSI :16 [ 0.841989] xen: registering gsi 16 triggering 0 polarity 1 [ 0.841993] Already setup the GSI :16 [ 0.842315] xen: registering gsi 16 triggering 0 polarity 1 [ 0.842320] Already setup the GSI :16 [ 0.842932] xen: registering gsi 16 triggering 0 polarity 1 [ 0.842938] Already setup the GSI :16 [ 0.843550] xen: registering gsi 16 triggering 0 polarity 1 [ 0.843555] Already setup the GSI :16 [ 0.844020] xen: registering gsi 17 triggering 0 polarity 1 [ 0.844037] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.844371] xen: registering gsi 19 triggering 0 polarity 1 [ 0.844376] Already setup the GSI :19 [ 0.844829] xen: registering gsi 16 triggering 0 polarity 1 [ 0.844834] Already setup the GSI :16 [ 0.845530] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.845704] ACPI: button: Power Button [PWRB] [ 0.845846] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.846102] ACPI: button: Power Button [PWRF] [ 0.846403] Monitor-Mwait will be used to enter C-1 state [ 0.846441] Monitor-Mwait will be used to enter C-2 state [ 0.846477] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.846917] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.847338] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.847860] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.848387] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.848913] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.849304] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.849763] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.850566] xen:xen_evtchn: Event-channel device installed [ 0.850792] xen_pciback: backend is vpci [ 0.851490] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.851795] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.852532] hpet_acpi_add: no address or irqs in _CRS [ 0.852765] Non-volatile memory driver v1.3 [ 0.852878] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.855752] loop: module loaded [ 0.862086] ahci 0000:00:1f.2: version 3.0 [ 0.862187] xen: registering gsi 16 triggering 0 polarity 1 [ 0.862196] Already setup the GSI :16 [ 0.862537] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.862686] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.878058] scsi host0: ahci [ 0.878448] scsi host1: ahci [ 0.878773] scsi host2: ahci [ 0.879078] scsi host3: ahci [ 0.879366] scsi host4: ahci [ 0.879713] scsi host5: ahci [ 0.879893] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 0.880038] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 0.880182] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 0.880325] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 0.880484] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 0.880628] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 0.881066] tun: Universal TUN/TAP device driver, 1.6 [ 0.881377] e100: Intel(R) PRO/100 Network Driver [ 0.881534] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.881677] sky2: driver version 1.30 [ 0.881865] xen_netfront: Initialising Xen virtual ethernet driver [ 0.882210] xen: registering gsi 18 triggering 0 polarity 1 [ 0.882220] Already setup the GSI :18 [ 0.882441] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.882661] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.882837] ehci-pci 0000:00:1a.0: debug port 2 [ 0.886963] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.893454] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.893695] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.893842] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.893985] usb usb1: Product: EHCI Host Controller [ 0.894098] usb usb1: Manufacturer: Linux 6.1.111+ ehci_hcd [ 0.894213] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.894509] hub 1-0:1.0: USB hub found [ 0.894633] hub 1-0:1.0: 2 ports detected [ 0.894999] xen: registering gsi 18 triggering 0 polarity 1 [ 0.895011] Already setup the GSI :18 [ 0.895202] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.895408] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.895597] ehci-pci 0000:00:1d.0: debug port 2 [ 0.899706] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.906435] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.906657] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.906806] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.906948] usb usb2: Product: EHCI Host Controller [ 0.907062] usb usb2: Manufacturer: Linux 6.1.111+ ehci_hcd [ 0.907177] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.907461] hub 2-0:1.0: USB hub found [ 0.907610] hub 2-0:1.0: 2 ports detected [ 0.908037] xen: registering gsi 19 triggering 0 polarity 1 [ 0.908047] Already setup the GSI :19 [ 0.908252] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.908463] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.909679] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.910151] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.910380] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.910535] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.910740] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.910886] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.911029] usb usb3: Product: xHCI Host Controller [ 0.911142] usb usb3: Manufacturer: Linux 6.1.111+ xhci-hcd [ 0.911257] usb usb3: SerialNumber: 0000:00:14.0 [ 0.911557] hub 3-0:1.0: USB hub found [ 0.911719] hub 3-0:1.0: 8 ports detected [ 0.912832] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.913005] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.913177] usb usb4: Product: xHCI Host Controller [ 0.913290] usb usb4: Manufacturer: Linux 6.1.111+ xhci-hcd [ 0.913418] usb usb4: SerialNumber: 0000:00:14.0 [ 0.913673] hub 4-0:1.0: USB hub found [ 0.913804] hub 4-0:1.0: 6 ports detected [ 0.914940] usbcore: registered new interface driver usblp [ 0.915078] usbcore: registered new interface driver usb-storage [ 0.917531] Freeing initrd memory: 20628K [ 0.917774] i8042: PNP: No PS/2 controller found. [ 0.918115] rtc_cmos 00:00: RTC can wake from S4 [ 0.918798] rtc_cmos 00:00: registered as rtc0 [ 0.918953] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.919159] device-mapper: uevent: version 1.0.3 [ 0.919276] xen: registering gsi 18 triggering 0 polarity 1 [ 0.919287] Already setup the GSI :18 [ 0.919390] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.919459] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.919564] intel_pstate: CPU model not supported [ 0.919695] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.919795] hid: raw HID events driver (C) Jiri Kosina [ 0.920176] usbcore: registered new interface driver usbhid [ 0.920292] usbhid: USB HID core driver [ 0.920349] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.920972] Initializing XFRM netlink socket [ 0.921196] NET: Registered PF_INET6 protocol family [ 0.921718] Segment Routing with IPv6 [ 0.921836] In-situ OAM (IOAM) with IPv6 [ 0.921978] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.922215] NET: Registered PF_PACKET protocol family [ 0.922366] 9pnet: Installing 9P2000 support [ 0.922509] Key type dns_resolver registered [ 0.923305] IPI shorthand broadcast: enabled [ 0.923457] sched_clock: Marking stable (886028072, 37398611)->(1768899111, -845472428) [ 0.924021] registered taskstats version 1 [ 0.924144] Loading compiled-in X.509 certificates [ 0.926637] PM: Magic number: 8:843:264 [ 0.926869] printk: console [netcon0] enabled [ 0.926991] netconsole: network logging started [ 0.927325] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.939145] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.939504] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.940167] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.940342] ALSA device list: [ 0.940471] No soundcards found. [ 1.135568] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.151547] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.151814] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.188454] ata6: SATA link down (SStatus 0 SControl 300) [ 1.188594] ata4: SATA link down (SStatus 0 SControl 300) [ 1.188747] ata1: SATA link down (SStatus 0 SControl 300) [ 1.188902] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.189062] ata2: SATA link down (SStatus 0 SControl 300) [ 1.189201] ata5: SATA link down (SStatus 0 SControl 300) [ 1.190191] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.272048] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.272210] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.272579] hub 1-1:1.0: USB hub found [ 1.272773] hub 1-1:1.0: 4 ports detected [ 1.278329] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.278476] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.279039] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.279306] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.279524] usb 3-3: Product: USB2.0 Hub [ 1.280175] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.280325] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.280561] hub 3-3:1.0: USB hub found [ 1.280803] hub 2-1:1.0: USB hub found [ 1.280973] hub 3-3:1.0: 4 ports detected [ 1.281111] hub 2-1:1.0: 4 ports detected [ 1.306319] ata3.00: configured for UDMA/133 [ 1.306640] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.307518] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.307607] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.307833] sd 2:0:0:0: [sda] Write Protect is off [ 1.307959] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.308024] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.308254] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.327532] sda: sda1 sda2 < sda5 > [ 1.327906] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.329158] Freeing unused kernel image (initmem) memory: 1580K [ 1.329286] Write protecting the kernel read-only data: 22528k [ 1.347210] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.348509] Freeing unused kernel image (rodata/data gap) memory: 1560K [ 1.397446] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.523714] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.523868] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.524539] hub 3-4:1.0: USB hub found [ 1.524762] hub 3-4:1.0: 4 ports detected [ 1.587461] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.664844] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.664998] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.665142] usb 3-3.2: Product: USB2.0 Hub [ 1.665810] hub 3-3.2:1.0: USB hub found [ 1.666239] hub 3-3.2:1.0: 4 ports detected [ 1.811293] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.811428] Run /init as init process [ 1.811538] with arguments: [ 1.811539] /init [ 1.811540] placeholder [ 1.811541] with environment: [ 1.811542] HOME=/ [ 1.811543] TERM=linux [ 1.817423] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.923808] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.923972] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.929911] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 2.215200] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 2.217026] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 2.217426] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.249928] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.250117] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.250580] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.250844] xen: registering gsi 16 triggering 0 polarity 1 [ 2.250854] Already setup the GSI :16 [ 2.253723] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.253845] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.254044] xen: registering gsi 16 triggering 0 polarity 1 [ 2.254050] Already setup the GSI :16 [ 2.280021] pps pps0: new PPS source ptp0 [ 2.280213] igb 0000:07:00.0: added PHC on eth0 [ 2.280380] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.280532] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.280699] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.280814] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.281057] xen: registering gsi 17 triggering 0 polarity 1 [ 2.281066] Already setup the GSI :17 [ 2.310584] pps pps1: new PPS source ptp1 [ 2.310765] igb 0000:08:00.0: added PHC on eth1 [ 2.310916] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.311036] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.311201] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.311315] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.311555] xen: registering gsi 16 triggering 0 polarity 1 [ 2.311563] Already setup the GSI :16 [ 2.369246] igb 0000:0b:00.0: added PHC on eth2 [ 2.369385] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.369526] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.369729] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.369844] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.370067] xen: registering gsi 17 triggering 0 polarity 1 [ 2.370075] Already setup the GSI :17 [ 2.428155] igb 0000:0b:00.1: added PHC on eth3 [ 2.428293] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.428425] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.428632] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.428768] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.428987] xen: registering gsi 18 triggering 0 polarity 1 [ 2.428994] Already setup the GSI :18 [ 2.486163] igb 0000:0b:00.2: added PHC on eth4 [ 2.486305] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.486439] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.486642] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.486757] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.487009] xen: registering gsi 19 triggering 0 polarity 1 [ 2.487018] Already setup the GSI :19 [ 2.545301] igb 0000:0b:00.3: added PHC on eth5 [ 2.545456] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.545577] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.545780] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.545895] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.548982] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.561726] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.569885] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.577874] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.585627] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.593758] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 2.985349] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.114974] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.115216] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.411513] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.411924] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.412144] xen: registering gsi 17 triggering 0 polarity 1 [ 3.412155] Already setup the GSI :17 [ 4.152737] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.282652] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.282884] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.579324] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.581673] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.589974] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 4.985984] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 4.992455] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.415595] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.496067] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.514327] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.601214] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.148268] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.148459] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.148646] device enx0cc47a9f87be entered promiscuous mode [ 14.658955] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 14.765777] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 14.766073] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 14.766195] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 14.766490] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready