[ 0.000000] Linux version 6.1.111+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Sat Sep 21 09:55:48 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000461] tsc: Detected 2200.000 MHz processor [ 0.000898] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000901] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000908] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000910] Disabled [ 0.000911] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000915] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000954] Kernel/User page tables isolation: disabled on XEN PV. [ 0.028162] RAMDISK: [mem 0x04000000-0x05423fff] [ 0.028170] ACPI: Early table checksum verification disabled [ 0.028776] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028787] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028826] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028875] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028891] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028907] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028923] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028939] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028955] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028971] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028988] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.029004] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.029020] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.029036] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.029052] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.029068] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.029084] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.029100] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.029116] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.029132] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.029148] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.029164] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.029172] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.029174] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.029175] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.029176] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.029177] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.029178] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.029179] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.029180] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.029181] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.029182] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.029183] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.029184] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.029185] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.029186] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.029187] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.029188] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.029189] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.029190] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.029191] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.029192] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.029238] Setting APIC routing to Xen PV. [ 0.033185] Zone ranges: [ 0.033186] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.033189] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.033191] Normal empty [ 0.033192] Movable zone start for each node [ 0.033192] Early memory node ranges [ 0.033193] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.033195] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.033196] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.033202] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.033237] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034794] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034799] p2m virtual area at (____ptrval____), size is 40000000 [ 0.222333] Remapped 102 page(s) [ 0.223711] ACPI: PM-Timer IO Port: 0x408 [ 0.223764] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223766] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223768] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223770] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223771] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223772] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223774] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223775] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223804] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223817] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223820] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223846] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223851] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223920] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223935] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223937] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223938] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223940] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223945] Booting kernel on Xen [ 0.223946] Xen version: 4.20-unstable (preserve-AD) [ 0.223949] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.230199] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.230483] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.230490] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.230493] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230572] xen: PV spinlocks enabled [ 0.230575] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230580] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230582] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230619] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230628] random: crng init done [ 0.230677] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230702] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.232018] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.232020] software IO TLB: area num 8. [ 0.294341] Memory: 389292K/524284K available (14349K kernel code, 2686K rwdata, 4584K rodata, 1580K init, 1288K bss, 134740K reserved, 0K cma-reserved) [ 0.294512] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.297005] Dynamic Preempt: voluntary [ 0.297104] rcu: Preemptible hierarchical RCU implementation. [ 0.297105] rcu: RCU event tracing is enabled. [ 0.297106] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.297107] Trampoline variant of Tasks RCU enabled. [ 0.297108] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.297109] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.307636] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.307758] xen:events: Using FIFO-based ABI [ 0.307785] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.307793] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.307801] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.307809] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.307816] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.307823] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.307831] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.307838] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.307846] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.307853] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.307861] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.307869] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.307876] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.307884] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.307891] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.307902] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.313286] Console: colour VGA+ 80x25 [ 0.328134] printk: console [tty0] enabled [ 0.329408] printk: console [hvc0] enabled [ 0.329529] ACPI: Core revision 20220331 [ 0.343511] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.343676] Xen: using vcpuop timer interface [ 0.343681] installing Xen timer for CPU 0 [ 0.343826] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb633008a4, max_idle_ns: 440795292230 ns [ 0.343985] Calibrating delay loop (skipped), value calculated using timer frequency.. 4400.00 BogoMIPS (lpj=2200000) [ 0.344311] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.344429] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.344556] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.344706] Spectre V2 : Mitigation: Retpolines [ 0.344991] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.345139] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.345264] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.345386] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.345535] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.345654] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.345807] MDS: Mitigation: Clear CPU buffers [ 0.345921] TAA: Mitigation: Clear CPU buffers [ 0.345990] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.346157] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.346303] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.346422] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.346548] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.346672] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.364336] Freeing SMP alternatives memory: 40K [ 0.364470] pid_max: default: 32768 minimum: 301 [ 0.365006] LSM: Security Framework initializing [ 0.365130] SELinux: Initializing. [ 0.365268] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.365416] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.366076] cpu 0 spinlock event irq 25 [ 0.366197] VPMU disabled by hypervisor. [ 0.366634] cblist_init_generic: Setting adjustable number of callback queues. [ 0.366781] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.366938] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.366991] signal: max sigframe size: 1776 [ 0.367155] rcu: Hierarchical SRCU implementation. [ 0.367281] rcu: Max phase no-delay instances is 400. [ 0.367772] smp: Bringing up secondary CPUs ... [ 0.368108] installing Xen timer for CPU 1 [ 0.368948] cpu 1 spinlock event irq 35 [ 0.369146] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.369992] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.370182] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.370606] installing Xen timer for CPU 2 [ 0.371080] cpu 2 spinlock event irq 41 [ 0.371195] installing Xen timer for CPU 3 [ 0.371687] cpu 3 spinlock event irq 47 [ 0.372198] installing Xen timer for CPU 4 [ 0.372690] cpu 4 spinlock event irq 53 [ 0.373180] installing Xen timer for CPU 5 [ 0.373656] cpu 5 spinlock event irq 59 [ 0.374056] installing Xen timer for CPU 6 [ 0.374520] cpu 6 spinlock event irq 65 [ 0.374520] installing Xen timer for CPU 7 [ 0.375350] cpu 7 spinlock event irq 71 [ 0.375350] smp: Brought up 1 node, 8 CPUs [ 0.375350] smpboot: Max logical packages: 1 [ 0.376081] devtmpfs: initialized [ 0.376153] x86/mm: Memory block size: 128MB [ 0.376497] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.377086] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.377243] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.377495] PM: RTC time: 10:14:35, date: 2024-09-21 [ 0.377738] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.377891] xen:grant_table: Grant tables using version 1 layout [ 0.378020] Grant table initialized [ 0.378331] audit: initializing netlink subsys (disabled) [ 0.378467] audit: type=2000 audit(1726913676.194:1): state=initialized audit_enabled=0 res=1 [ 0.378467] thermal_sys: Registered thermal governor 'step_wise' [ 0.378467] thermal_sys: Registered thermal governor 'user_space' [ 0.379041] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.379476] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.379631] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.507948] PCI: Using configuration type 1 for base access [ 0.510524] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.511048] ACPI: Added _OSI(Module Device) [ 0.511151] ACPI: Added _OSI(Processor Device) [ 0.511265] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.511379] ACPI: Added _OSI(Processor Aggregator Device) [ 0.541308] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.543329] xen: registering gsi 9 triggering 0 polarity 0 [ 0.545946] ACPI: Dynamic OEM Table Load: [ 0.551072] ACPI: Interpreter enabled [ 0.551205] ACPI: PM: (supports S0 S4 S5) [ 0.551317] ACPI: Using IOAPIC for interrupt routing [ 0.551463] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.551621] PCI: Using E820 reservations for host bridge windows [ 0.552221] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.575974] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.576115] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.576354] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.576614] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.576743] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.576919] PCI host bridge to bus 0000:ff [ 0.577993] pci_bus 0000:ff: root bus resource [bus ff] [ 0.578197] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.578647] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.579091] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.579517] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.579958] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.580296] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.580723] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.581163] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.581613] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.582081] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.582507] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.582945] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.583299] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.583721] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.584172] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.584596] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.585036] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.585464] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.585719] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.586206] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.586680] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.587159] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.587631] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.588114] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.588590] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.589065] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.589491] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.589946] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.590339] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.590820] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.591294] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.591754] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.592193] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.592618] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.593057] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.593491] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.593981] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.594450] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.594933] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.595389] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.595828] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.596254] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.596683] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.596941] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.597309] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.597758] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.598195] pci_bus 0000:ff: on NUMA node 0 [ 0.602554] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.602686] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.602973] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.603211] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.603338] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.603844] PCI host bridge to bus 0000:00 [ 0.603959] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.603989] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.604110] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.604256] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.604402] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.604594] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.605235] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.605778] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.606156] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.606690] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.607088] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.607618] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.607976] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.608499] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.608888] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.609395] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.609783] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.610309] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.610699] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.611280] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.611925] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.612550] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.612773] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.613236] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.613601] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.613821] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.614291] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.614610] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.614829] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.615311] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.615697] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.615896] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.616406] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.616737] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.617297] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.617510] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.617633] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.625169] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.625726] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.625923] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.626998] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.627293] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.627849] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.628052] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.628176] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.628476] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.629045] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.629241] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.629363] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.629688] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.629898] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.630406] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.630730] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.631507] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.631703] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.631862] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.632030] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.632189] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.632347] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.632538] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.632852] pci 0000:00:1f.2: PME# supported from D3hot [ 0.633145] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.633364] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.633609] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.634004] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.634224] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.634941] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.635169] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.635503] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.635716] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.636486] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.636701] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.637421] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.637636] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.638358] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.638576] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.639286] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.639422] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.639763] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.639989] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.640276] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.640461] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.640819] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.641051] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.641174] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.641379] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.641501] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.642089] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.642303] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.642590] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.642775] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.643135] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.643340] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.643462] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.643666] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.643788] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.644360] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.644496] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.644635] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.644938] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.645168] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.645533] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.645653] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.645862] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.646088] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.646255] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.646788] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.647261] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.647395] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.647524] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.647894] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.647989] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.648197] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.648414] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.648580] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.649129] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.649595] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.649721] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.649854] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.650205] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.650600] pci 0000:09:00.0: enabling Extended Tags [ 0.650950] pci 0000:09:00.0: supports D1 D2 [ 0.650988] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.651350] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.651503] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.651632] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.651946] pci_bus 0000:0a: extended config space not accessible [ 0.652042] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.652249] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.652417] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.652585] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.652955] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.653132] pci 0000:0a:00.0: supports D1 D2 [ 0.653246] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.653695] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.653834] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.653974] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.654257] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.654458] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.654677] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.654839] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.655357] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.655602] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.655749] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.655968] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.655988] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.656589] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.656791] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.657003] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.657166] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.657695] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.657936] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.657988] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.658208] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.658359] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.658883] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.659070] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.659292] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.659460] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.659973] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.660099] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.660250] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.660478] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.660623] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.661149] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.661359] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.661569] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.661733] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.662276] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.662507] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.662653] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.662871] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.662988] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.663588] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.663715] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.663844] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.663984] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.664469] pci_bus 0000:00: on NUMA node 0 [ 0.664565] xen: registering gsi 13 triggering 1 polarity 0 [ 0.665534] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.665730] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.665926] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.666063] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.666264] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.666383] ACPI: PCI: Interrupt link LNKE disabled [ 0.666568] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.666687] ACPI: PCI: Interrupt link LNKF disabled [ 0.666881] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.666988] ACPI: PCI: Interrupt link LNKG disabled [ 0.667189] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.667309] ACPI: PCI: Interrupt link LNKH disabled [ 0.667569] xen:balloon: Initialising balloon driver [ 0.668079] iommu: Default domain type: Translated [ 0.675991] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.676177] SCSI subsystem initialized [ 0.676984] libata version 3.00 loaded. [ 0.676984] ACPI: bus type USB registered [ 0.676984] usbcore: registered new interface driver usbfs [ 0.676984] usbcore: registered new interface driver hub [ 0.676984] usbcore: registered new device driver usb [ 0.676984] pps_core: LinuxPPS API ver. 1 registered [ 0.676990] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.677143] PTP clock support registered [ 0.678033] Advanced Linux Sound Architecture Driver Initialized. [ 0.678286] NetLabel: Initializing [ 0.678399] NetLabel: domain hash size = 128 [ 0.678512] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.678512] NetLabel: unlabeled traffic allowed by default [ 0.678512] PCI: Using ACPI for IRQ routing [ 0.715006] PCI: pci_cache_line_size set to 64 bytes [ 0.715797] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.715800] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.716026] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.716148] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.716267] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.716267] vgaarb: loaded [ 0.717990] clocksource: Switched to clocksource tsc-early [ 0.718241] VFS: Disk quotas dquot_6.6.0 [ 0.718366] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.718510] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.718668] pnp: PnP ACPI init [ 0.719151] xen: registering gsi 8 triggering 1 polarity 0 [ 0.719348] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.719475] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.719595] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.719713] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.719833] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.719951] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.720086] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.720209] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.720330] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.720451] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.720571] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.720691] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.720845] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.721258] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.721382] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.721501] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.721619] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.721738] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.722173] xen: registering gsi 4 triggering 1 polarity 0 [ 0.722178] Already setup the GSI :4 [ 0.722291] pnp 00:03: [dma 0 disabled] [ 0.722599] xen: registering gsi 3 triggering 1 polarity 0 [ 0.722611] pnp 00:04: [dma 0 disabled] [ 0.723199] pnp: PnP ACPI: found 5 devices [ 0.754871] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.755044] NET: Registered PF_INET protocol family [ 0.755205] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.755570] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.755722] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.755870] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.756067] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.756245] TCP: Hash tables configured (established 4096 bind 4096) [ 0.756411] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.756535] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.756686] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.757154] RPC: Registered named UNIX socket transport module. [ 0.757278] RPC: Registered udp transport module. [ 0.757392] RPC: Registered tcp transport module. [ 0.757506] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.758060] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.758236] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.758402] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.758564] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.758712] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.758888] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.759085] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.759220] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.759383] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.759506] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.759659] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.759803] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.759949] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.760088] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.760234] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.760379] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.760525] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.760648] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.760793] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.760944] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.761112] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.761236] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.761381] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.761526] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.761672] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.761806] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.761941] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.762124] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.762299] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.762476] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.762596] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.762736] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.762898] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.763037] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.763177] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.763340] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.763461] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.763603] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.763777] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.763898] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.764069] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.764235] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.764393] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.764548] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.764701] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.764855] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.765027] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.765188] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.765342] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.765496] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.765617] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.765756] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.765890] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.766082] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.766233] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.766352] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.766475] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.766613] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.766735] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.766854] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.766974] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.767137] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.767254] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.767374] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.767490] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.767610] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.767726] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.767847] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.768010] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.768130] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.768247] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.768366] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.768914] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.769161] xen: registering gsi 19 triggering 0 polarity 1 [ 0.769188] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.778054] xen: registering gsi 18 triggering 0 polarity 1 [ 0.778074] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.794366] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 16004 usecs [ 0.794611] xen: registering gsi 18 triggering 0 polarity 1 [ 0.794617] Already setup the GSI :18 [ 0.811277] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 16329 usecs [ 0.811491] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.811668] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.811759] Unpacking initramfs... [ 0.811811] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.812167] kvm: no hardware support for 'kvm_intel' [ 0.820114] has_svm: not amd or hygon [ 0.820229] kvm: no hardware support for 'kvm_amd' [ 0.820347] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb633008a4, max_idle_ns: 440795292230 ns [ 0.820908] clocksource: Switched to clocksource tsc [ 0.823375] Initialise system trusted keyrings [ 0.823672] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.825191] NFS: Registering the id_resolver key type [ 0.825317] Key type id_resolver registered [ 0.825429] Key type id_legacy registered [ 0.825628] 9p: Installing v9fs 9p2000 file system support [ 0.839585] Key type asymmetric registered [ 0.839712] Asymmetric key parser 'x509' registered [ 0.839849] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.840006] io scheduler mq-deadline registered [ 0.840148] io scheduler kyber registered [ 0.841163] xen: registering gsi 16 triggering 0 polarity 1 [ 0.841197] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.841738] xen: registering gsi 16 triggering 0 polarity 1 [ 0.841744] Already setup the GSI :16 [ 0.842386] xen: registering gsi 16 triggering 0 polarity 1 [ 0.842392] Already setup the GSI :16 [ 0.842717] xen: registering gsi 16 triggering 0 polarity 1 [ 0.842721] Already setup the GSI :16 [ 0.843042] xen: registering gsi 16 triggering 0 polarity 1 [ 0.843046] Already setup the GSI :16 [ 0.843685] xen: registering gsi 16 triggering 0 polarity 1 [ 0.843690] Already setup the GSI :16 [ 0.844306] xen: registering gsi 16 triggering 0 polarity 1 [ 0.844311] Already setup the GSI :16 [ 0.844752] xen: registering gsi 17 triggering 0 polarity 1 [ 0.844769] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.845149] xen: registering gsi 19 triggering 0 polarity 1 [ 0.845154] Already setup the GSI :19 [ 0.845602] xen: registering gsi 16 triggering 0 polarity 1 [ 0.845606] Already setup the GSI :16 [ 0.846298] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.846507] ACPI: button: Power Button [PWRB] [ 0.846652] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.846895] ACPI: button: Power Button [PWRF] [ 0.847200] Monitor-Mwait will be used to enter C-1 state [ 0.847248] Monitor-Mwait will be used to enter C-2 state [ 0.847271] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.847627] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.847991] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.848548] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.849113] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.849634] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.850122] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.850633] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.851482] xen:xen_evtchn: Event-channel device installed [ 0.851692] xen_pciback: backend is vpci [ 0.852577] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.852903] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.853681] hpet_acpi_add: no address or irqs in _CRS [ 0.853891] Non-volatile memory driver v1.3 [ 0.854007] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.856806] loop: module loaded [ 0.863118] ahci 0000:00:1f.2: version 3.0 [ 0.863221] xen: registering gsi 16 triggering 0 polarity 1 [ 0.863230] Already setup the GSI :16 [ 0.863554] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.863705] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.878757] scsi host0: ahci [ 0.879187] scsi host1: ahci [ 0.879508] scsi host2: ahci [ 0.879847] scsi host3: ahci [ 0.880197] scsi host4: ahci [ 0.880524] scsi host5: ahci [ 0.880668] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 0.880815] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 0.880961] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 0.881123] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 0.881269] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 0.881415] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 0.881938] tun: Universal TUN/TAP device driver, 1.6 [ 0.882237] e100: Intel(R) PRO/100 Network Driver [ 0.882383] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.882534] sky2: driver version 1.30 [ 0.882722] xen_netfront: Initialising Xen virtual ethernet driver [ 0.883079] xen: registering gsi 18 triggering 0 polarity 1 [ 0.883113] Already setup the GSI :18 [ 0.883323] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.883521] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.883699] ehci-pci 0000:00:1a.0: debug port 2 [ 0.887845] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.894144] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.894369] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.894518] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.894663] usb usb1: Product: EHCI Host Controller [ 0.894778] usb usb1: Manufacturer: Linux 6.1.111+ ehci_hcd [ 0.894902] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.895204] hub 1-0:1.0: USB hub found [ 0.895332] hub 1-0:1.0: 2 ports detected [ 0.895698] xen: registering gsi 18 triggering 0 polarity 1 [ 0.895707] Already setup the GSI :18 [ 0.895899] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.896117] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.896303] ehci-pci 0000:00:1d.0: debug port 2 [ 0.900404] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.907138] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.907362] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.907512] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.907657] usb usb2: Product: EHCI Host Controller [ 0.907773] usb usb2: Manufacturer: Linux 6.1.111+ ehci_hcd [ 0.907889] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.908189] hub 2-0:1.0: USB hub found [ 0.908316] hub 2-0:1.0: 2 ports detected [ 0.908748] xen: registering gsi 19 triggering 0 polarity 1 [ 0.908757] Already setup the GSI :19 [ 0.908966] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.909192] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.910414] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.910879] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.911077] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.911249] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.911456] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.911609] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.911754] usb usb3: Product: xHCI Host Controller [ 0.911869] usb usb3: Manufacturer: Linux 6.1.111+ xhci-hcd [ 0.911986] usb usb3: SerialNumber: 0000:00:14.0 [ 0.912300] hub 3-0:1.0: USB hub found [ 0.912434] hub 3-0:1.0: 8 ports detected [ 0.913566] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.913719] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.913864] usb usb4: Product: xHCI Host Controller [ 0.913979] usb usb4: Manufacturer: Linux 6.1.111+ xhci-hcd [ 0.914117] usb usb4: SerialNumber: 0000:00:14.0 [ 0.914384] hub 4-0:1.0: USB hub found [ 0.914517] hub 4-0:1.0: 6 ports detected [ 0.915638] usbcore: registered new interface driver usblp [ 0.915778] usbcore: registered new interface driver usb-storage [ 0.917182] i8042: PNP: No PS/2 controller found. [ 0.917576] rtc_cmos 00:00: RTC can wake from S4 [ 0.918269] rtc_cmos 00:00: registered as rtc0 [ 0.918432] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.918711] device-mapper: uevent: version 1.0.3 [ 0.918963] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.918969] xen: registering gsi 18 triggering 0 polarity 1 [ 0.918980] intel_pstate: CPU model not supported [ 0.919172] Already setup the GSI :18 [ 0.919295] hid: raw HID events driver (C) Jiri Kosina [ 0.919468] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.919511] Freeing initrd memory: 20624K [ 0.919669] usbcore: registered new interface driver usbhid [ 0.919793] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.919891] usbhid: USB HID core driver [ 0.920384] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.920675] Initializing XFRM netlink socket [ 0.920916] NET: Registered PF_INET6 protocol family [ 0.921518] Segment Routing with IPv6 [ 0.921638] In-situ OAM (IOAM) with IPv6 [ 0.921781] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.922019] NET: Registered PF_PACKET protocol family [ 0.922201] 9pnet: Installing 9P2000 support [ 0.922329] Key type dns_resolver registered [ 0.923111] IPI shorthand broadcast: enabled [ 0.923278] sched_clock: Marking stable (887162075, 36079535)->(1766808376, -843566766) [ 0.923830] registered taskstats version 1 [ 0.923946] Loading compiled-in X.509 certificates [ 0.926963] PM: Magic number: 8:823:224 [ 0.927178] acpi device:71: hash matches [ 0.927342] printk: console [netcon0] enabled [ 0.927458] netconsole: network logging started [ 0.927796] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.939944] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.940301] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.940961] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.941153] ALSA device list: [ 0.941274] No soundcards found. [ 1.137211] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.145186] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.153146] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.190311] ata5: SATA link down (SStatus 0 SControl 300) [ 1.190469] ata1: SATA link down (SStatus 0 SControl 300) [ 1.190612] ata6: SATA link down (SStatus 0 SControl 300) [ 1.190769] ata4: SATA link down (SStatus 0 SControl 300) [ 1.190913] ata2: SATA link down (SStatus 0 SControl 300) [ 1.191053] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.192267] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.265955] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.266272] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.266720] hub 1-1:1.0: USB hub found [ 1.266921] hub 1-1:1.0: 4 ports detected [ 1.273548] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.273706] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.274118] hub 2-1:1.0: USB hub found [ 1.274298] hub 2-1:1.0: 4 ports detected [ 1.280198] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.280411] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.280792] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.280950] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.281075] usb 3-3: Product: USB2.0 Hub [ 1.281929] hub 3-3:1.0: USB hub found [ 1.282499] hub 3-3:1.0: 4 ports detected [ 1.308102] ata3.00: configured for UDMA/133 [ 1.308547] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.309527] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.309658] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.309852] sd 2:0:0:0: [sda] Write Protect is off [ 1.309975] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.310045] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.310325] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.329124] sda: sda1 sda2 < sda5 > [ 1.329554] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.330798] Freeing unused kernel image (initmem) memory: 1580K [ 1.330935] Write protecting the kernel read-only data: 22528k [ 1.348944] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.350255] Freeing unused kernel image (rodata/data gap) memory: 1560K [ 1.399131] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.525414] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.525570] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.526258] hub 3-4:1.0: USB hub found [ 1.526479] hub 3-4:1.0: 4 ports detected [ 1.589148] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.666567] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.666723] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.666870] usb 3-3.2: Product: USB2.0 Hub [ 1.667600] hub 3-3.2:1.0: USB hub found [ 1.668088] hub 3-3.2:1.0: 4 ports detected [ 1.813006] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.813142] Run /init as init process [ 1.813254] with arguments: [ 1.813255] /init [ 1.813256] placeholder [ 1.813257] with environment: [ 1.813258] HOME=/ [ 1.813259] TERM=linux [ 1.819124] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.924473] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.924636] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.930681] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 2.268912] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.269158] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.269549] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.269770] xen: registering gsi 16 triggering 0 polarity 1 [ 2.269779] Already setup the GSI :16 [ 2.274395] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.274541] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.274895] xen: registering gsi 16 triggering 0 polarity 1 [ 2.274906] Already setup the GSI :16 [ 2.301331] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 2.301963] pps pps0: new PPS source ptp0 [ 2.302224] igb 0000:07:00.0: added PHC on eth0 [ 2.302415] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.302571] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.302625] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 2.302776] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.303048] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.303051] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.303208] xen: registering gsi 17 triggering 0 polarity 1 [ 2.303429] Already setup the GSI :17 [ 2.333490] pps pps1: new PPS source ptp1 [ 2.333681] igb 0000:08:00.0: added PHC on eth1 [ 2.333816] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.333938] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.334118] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.334266] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.334497] xen: registering gsi 16 triggering 0 polarity 1 [ 2.334505] Already setup the GSI :16 [ 2.391961] igb 0000:0b:00.0: added PHC on eth2 [ 2.392152] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.392312] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.392577] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.392709] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.392985] xen: registering gsi 17 triggering 0 polarity 1 [ 2.392999] Already setup the GSI :17 [ 2.451119] igb 0000:0b:00.1: added PHC on eth3 [ 2.451296] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.451455] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.451699] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.451836] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.452125] xen: registering gsi 18 triggering 0 polarity 1 [ 2.452137] Already setup the GSI :18 [ 2.509878] igb 0000:0b:00.2: added PHC on eth4 [ 2.510069] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.510259] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.510549] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.510686] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.510958] xen: registering gsi 19 triggering 0 polarity 1 [ 2.510971] Already setup the GSI :19 [ 2.567481] igb 0000:0b:00.3: added PHC on eth5 [ 2.567657] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.567815] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.568057] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.568207] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.571152] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.579634] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.594553] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.605484] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.612449] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.618418] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 3.001671] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.131733] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.131963] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.421204] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.421518] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.421738] xen: registering gsi 17 triggering 0 polarity 1 [ 3.421749] Already setup the GSI :17 [ 4.164735] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.295102] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.295421] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.593151] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.595583] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 4.603619] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 5.004946] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.012976] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.471310] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.519202] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.541339] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.627815] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.110556] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.110757] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.110934] device enx0cc47a9f87be entered promiscuous mode [ 14.601670] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 14.703374] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 14.703652] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 14.703777] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 14.704058] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready