[ 0.000000] Linux version 6.11.0+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Sat Sep 21 16:38:02 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/pinot0--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000f6000000-0x00000000f6003fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SML/H8SML, BIOS 3.5 11/25/2013 [ 0.000000] DMI: Memory slots populated: 2/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000011] Xen PV: Detected 4 vCPUS [ 0.039085] tsc: Fast TSC calibration using PIT [ 0.039087] tsc: Detected 2800.080 MHz processor [ 0.039088] tsc: Detected 2799.998 MHz TSC [ 0.039311] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.039315] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.039322] last_pfn = 0xdfeb2 max_arch_pfn = 0x400000000 [ 0.039326] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.039327] MTRRs set to read-only [ 0.039330] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.065764] RAMDISK: [mem 0x04000000-0x05472fff] [ 0.065783] ACPI: Early table checksum verification disabled [ 0.066869] ACPI: RSDP 0x00000000000FA1C0 000024 (v02 ACPIAM) [ 0.066879] ACPI: XSDT 0x00000000DFEA0100 00007C (v01 SMCI 20131125 MSFT 00000097) [ 0.066916] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.066963] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20240827/tbfadt-560) [ 0.066974] ACPI: DSDT 0x00000000DFEA0600 00562B (v01 1CF11 1CF11000 00000000 INTL 20051117) [ 0.066984] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.066994] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.067004] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.067014] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.067024] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.067034] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.067045] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.067056] ACPI: SSDT 0x00000000DFEAA6F0 000B9C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.067066] ACPI: EINJ 0x00000000DFEAB290 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.067076] ACPI: BERT 0x00000000DFEAB420 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.067086] ACPI: ERST 0x00000000DFEAB450 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.067097] ACPI: HEST 0x00000000DFEAB660 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.067102] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.067104] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c2a] [ 0.067105] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.067106] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.067108] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.067109] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.067110] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.067111] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.067112] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.067114] ACPI: Reserving SSDT table memory at [mem 0xdfeaa6f0-0xdfeab28b] [ 0.067115] ACPI: Reserving EINJ table memory at [mem 0xdfeab290-0xdfeab3bf] [ 0.067116] ACPI: Reserving BERT table memory at [mem 0xdfeab420-0xdfeab44f] [ 0.067117] ACPI: Reserving ERST table memory at [mem 0xdfeab450-0xdfeab65f] [ 0.067118] ACPI: Reserving HEST table memory at [mem 0xdfeab660-0xdfeab707] [ 0.067236] APIC: Switched APIC routing to: Xen PV [ 0.069573] Zone ranges: [ 0.069575] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.069578] DMA32 [mem 0x0000000001000000-0x00000000dfeb1fff] [ 0.069580] Normal empty [ 0.069581] Movable zone start for each node [ 0.069582] Early memory node ranges [ 0.069582] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.069585] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.069587] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.069599] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.069695] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.073820] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.073832] p2m virtual area at (____ptrval____), size is 40000000 [ 0.294200] Remapped 102 page(s) [ 0.294207] Remapped 0 non-RAM page(s) [ 0.294754] ACPI: PM-Timer IO Port: 0x808 [ 0.294786] CPU topo: CPU limit of 4 reached. Ignoring further CPUs [ 0.294815] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.294819] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.294841] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.294850] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.294862] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.294866] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.294887] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.294891] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.294905] CPU topo: Max. logical packages: 1 [ 0.294906] CPU topo: Max. logical dies: 1 [ 0.294907] CPU topo: Max. dies per package: 1 [ 0.294914] CPU topo: Max. threads per core: 1 [ 0.294916] CPU topo: Num. cores per package: 4 [ 0.294917] CPU topo: Num. threads per package: 4 [ 0.294917] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.294918] CPU topo: Rejected CPUs 4 [ 0.294936] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.294939] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.294940] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.294942] PM: hibernation: Registered nosave memory: [mem 0x20066000-0xdfe9dfff] [ 0.294943] PM: hibernation: Registered nosave memory: [mem 0xdfe9e000-0xdfe9ffff] [ 0.294944] PM: hibernation: Registered nosave memory: [mem 0xdfea0000-0xdfeb1fff] [ 0.294946] [mem 0x20066000-0xdfe9dfff] available for PCI devices [ 0.294951] Booting kernel on Xen [ 0.294952] Xen version: 4.20-unstable (preserve-AD) [ 0.294956] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.301452] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.302370] percpu: Embedded 57 pages/cpu s194520 r8192 d30760 u524288 [ 0.302379] pcpu-alloc: s194520 r8192 d30760 u524288 alloc=1*2097152 [ 0.302383] pcpu-alloc: [0] 0 1 2 3 [ 0.302467] xen: PV spinlocks enabled [ 0.302471] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.302475] Kernel command line: placeholder root=/dev/mapper/pinot0--vg-root ro console=hvc0 [ 0.302549] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.302756] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.302862] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.303071] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.303076] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.303079] software IO TLB: area num 4. [ 0.409059] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.411898] Dynamic Preempt: voluntary [ 0.412008] rcu: Preemptible hierarchical RCU implementation. [ 0.412009] rcu: RCU event tracing is enabled. [ 0.412010] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.412012] Trampoline variant of Tasks RCU enabled. [ 0.412014] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.412015] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.412035] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.419014] NR_IRQS: 4352, nr_irqs: 1000, preallocated irqs: 16 [ 0.419167] xen:events: Using FIFO-based ABI [ 0.419197] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.419209] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.419215] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.419220] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.419225] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.419230] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.419235] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.419240] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.419245] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.419250] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.419256] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.419262] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.419267] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.419272] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.419277] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.419288] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.425398] Console: colour VGA+ 80x25 [ 0.425403] printk: legacy console [tty0] enabled [ 0.439583] printk: legacy console [hvc0] enabled [ 0.440261] ACPI: Core revision 20240827 [ 0.444232] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.444389] Xen: using vcpuop timer interface [ 0.444395] installing Xen timer for CPU 0 [ 0.444641] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c3ee517e, max_idle_ns: 440795257231 ns [ 0.444814] Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.99 BogoMIPS (lpj=2799998) [ 0.445007] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.445209] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.445328] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.445443] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.445824] Spectre V2 : Mitigation: Retpolines [ 0.445927] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.446071] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.446206] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.446316] RETBleed: Mitigation: untrained return thunk [ 0.446423] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.446567] Speculative Store Bypass: Vulnerable [ 0.446692] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.446817] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.446926] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.447036] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.447146] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.472736] Freeing SMP alternatives memory: 40K [ 0.472821] pid_max: default: 32768 minimum: 301 [ 0.472970] LSM: initializing lsm=capability,selinux [ 0.473109] SELinux: Initializing. [ 0.473427] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.473574] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.474946] cpu 0 spinlock event irq 57 [ 0.475088] VPMU disabled by hypervisor. [ 0.475653] Performance Events: PMU not available due to virtualization, using software events only. [ 0.475817] signal: max sigframe size: 1776 [ 0.475977] rcu: Hierarchical SRCU implementation. [ 0.476081] rcu: Max phase no-delay instances is 400. [ 0.476352] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.486204] smp: Bringing up secondary CPUs ... [ 0.488828] installing Xen timer for CPU 1 [ 0.489265] installing Xen timer for CPU 2 [ 0.490423] installing Xen timer for CPU 3 [ 0.026518] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0011 [ 0.491310] cpu 1 spinlock event irq 77 [ 0.026518] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0012 [ 0.492109] cpu 2 spinlock event irq 78 [ 0.026518] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0013 [ 0.492930] cpu 3 spinlock event irq 79 [ 0.494339] smp: Brought up 1 node, 4 CPUs [ 0.495153] Memory: 381936K/524284K available (16384K kernel code, 2784K rwdata, 6292K rodata, 2700K init, 1744K bss, 138296K reserved, 0K cma-reserved) [ 0.496205] devtmpfs: initialized [ 0.497020] x86/mm: Memory block size: 128MB [ 0.500936] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.501806] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.502214] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.502834] PM: RTC time: 18:30:34, date: 2024-09-21 [ 0.503625] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.503769] xen:grant_table: Grant tables using version 1 layout [ 0.503838] Grant table initialized [ 0.504251] audit: initializing netlink subsys (disabled) [ 0.504871] audit: type=2000 audit(1726943434.324:1): state=initialized audit_enabled=0 res=1 [ 0.505921] thermal_sys: Registered thermal governor 'step_wise' [ 0.505924] thermal_sys: Registered thermal governor 'user_space' [ 0.508332] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.508844] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.636295] PCI: Using configuration type 1 for base access [ 0.636581] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.638045] ACPI: Added _OSI(Module Device) [ 0.638385] ACPI: Added _OSI(Processor Device) [ 0.638720] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.638837] ACPI: Added _OSI(Processor Aggregator Device) [ 0.645108] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.645677] xen: registering gsi 9 triggering 0 polarity 1 [ 0.649359] ACPI: Interpreter enabled [ 0.649424] ACPI: PM: (supports S0 S1 S4 S5) [ 0.649818] ACPI: Using IOAPIC for interrupt routing [ 0.649983] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.650156] PCI: Using E820 reservations for host bridge windows [ 0.650440] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.661622] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.661742] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.661821] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.661934] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.662078] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.662543] PCI host bridge to bus 0000:00 [ 0.662648] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.662761] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.662815] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.662960] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.663121] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.663263] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.663444] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.664007] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.664557] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.664779] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.664830] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.664945] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.665108] pci 0000:00:09.0: enabling Extended Tags [ 0.665334] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.665627] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.665887] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.666006] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.666121] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.666283] pci 0000:00:0a.0: enabling Extended Tags [ 0.666509] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.666860] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f conventional PCI endpoint [ 0.667056] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.667186] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.667316] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.667445] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.667573] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.667707] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.667872] pci 0000:00:11.0: set SATA to AHCI mode [ 0.668225] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.668419] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.668815] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.669005] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.669438] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.669627] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.670009] pci 0000:00:12.2: supports D1 D2 [ 0.670112] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.670385] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.670598] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.670998] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.671226] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.671631] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.671842] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.672178] pci 0000:00:13.2: supports D1 D2 [ 0.672280] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.672595] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.673149] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.673339] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.673472] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.673602] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.673730] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.673842] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.674028] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.674155] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.674264] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.674375] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.674680] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.675174] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.675438] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.675567] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.675689] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.675962] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.676151] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.676566] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.676955] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.677270] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.677591] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.677996] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.678315] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.678793] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.678868] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.679032] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.679170] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.679562] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.680003] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.680291] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.680486] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.680697] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.680835] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.681233] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.683871] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.684049] pci_bus 0000:03: extended config space not accessible [ 0.684228] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.685895] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.686052] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.686188] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.686469] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.686923] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.687085] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.687235] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.687409] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.687587] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.687751] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.687887] pci_bus 0000:00: on NUMA node 0 [ 0.688508] xen: registering gsi 13 triggering 1 polarity 0 [ 0.689048] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.689236] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.689437] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.689696] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.689891] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.690107] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.690290] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.690504] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.690836] xen:balloon: Initialising balloon driver [ 0.691226] iommu: Default domain type: Translated [ 0.691837] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.692451] SCSI subsystem initialized [ 0.692903] libata version 3.00 loaded. [ 0.693088] ACPI: bus type USB registered [ 0.693365] usbcore: registered new interface driver usbfs [ 0.693702] usbcore: registered new interface driver hub [ 0.693897] usbcore: registered new device driver usb [ 0.694203] pps_core: LinuxPPS API ver. 1 registered [ 0.694497] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.694858] PTP clock support registered [ 0.695985] Advanced Linux Sound Architecture Driver Initialized. [ 0.697801] NetLabel: Initializing [ 0.698066] NetLabel: domain hash size = 128 [ 0.698284] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.698721] NetLabel: unlabeled traffic allowed by default [ 0.699936] PCI: Using ACPI for IRQ routing [ 0.804309] PCI: pci_cache_line_size set to 64 bytes [ 0.804499] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.804504] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.804572] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.804572] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.804572] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.804816] vgaarb: loaded [ 0.805859] clocksource: Switched to clocksource tsc-early [ 0.806367] VFS: Disk quotas dquot_6.6.0 [ 0.806490] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.806666] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.806871] pnp: PnP ACPI init [ 0.807304] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.807571] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.808107] xen: registering gsi 8 triggering 1 polarity 0 [ 0.808365] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.808695] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.808828] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.809327] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.809450] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.809575] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.809690] system 00:05: [io 0x040b] has been reserved [ 0.809803] system 00:05: [io 0x04d6] has been reserved [ 0.809926] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.810043] system 00:05: [io 0x0c14] has been reserved [ 0.810154] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.810270] system 00:05: [io 0x0c52] has been reserved [ 0.810383] system 00:05: [io 0x0c6c] has been reserved [ 0.810521] system 00:05: [io 0x0c6f] has been reserved [ 0.810633] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.810749] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.810882] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.810998] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.811113] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.811229] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.811346] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.811461] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.811577] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.811717] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.811842] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.811958] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.812076] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.812236] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.812635] xen: registering gsi 4 triggering 1 polarity 0 [ 0.812640] Already setup the GSI :4 [ 0.812746] pnp 00:06: [dma 0 disabled] [ 0.813097] xen: registering gsi 3 triggering 1 polarity 0 [ 0.813109] pnp 00:07: [dma 0 disabled] [ 0.813290] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.813732] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.813938] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.814059] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.814194] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.814313] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.814606] pnp: PnP ACPI: found 10 devices [ 0.838489] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.838739] NET: Registered PF_INET protocol family [ 0.838943] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.839409] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.839567] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.839744] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.839997] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.840198] TCP: Hash tables configured (established 4096 bind 4096) [ 0.840383] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.840506] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.840670] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.841096] RPC: Registered named UNIX socket transport module. [ 0.841242] RPC: Registered udp transport module. [ 0.841362] RPC: Registered tcp transport module. [ 0.841472] RPC: Registered tcp-with-tls transport module. [ 0.841586] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.842298] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.842422] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.842551] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.842696] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.842827] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.842953] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.843091] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.843214] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.843340] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.843532] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.843649] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.843766] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.843892] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.844011] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.844142] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.844256] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.844372] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.844485] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.844627] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.844743] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.844870] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.844987] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.845103] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.845221] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.845340] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.845707] xen: registering gsi 16 triggering 0 polarity 1 [ 0.845751] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.508017] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 646890 usecs [ 1.508313] xen: registering gsi 16 triggering 0 polarity 1 [ 1.508324] Already setup the GSI :16 [ 1.531029] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 22245 usecs [ 1.531307] xen: registering gsi 17 triggering 0 polarity 1 [ 1.531381] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.531586] xen: registering gsi 18 triggering 0 polarity 1 [ 1.531605] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.554021] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 21966 usecs [ 1.554277] xen: registering gsi 18 triggering 0 polarity 1 [ 1.554288] Already setup the GSI :18 [ 1.577033] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 22282 usecs [ 1.577299] xen: registering gsi 19 triggering 0 polarity 1 [ 1.577356] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.577613] xen: registering gsi 18 triggering 0 polarity 1 [ 1.577618] Already setup the GSI :18 [ 1.601481] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 23389 usecs [ 1.601952] PCI: CLS 64 bytes, default 64 [ 1.602120] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.602205] Unpacking initramfs... [ 1.602230] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 1.602540] kvm_intel: VMX not supported by CPU 2 [ 1.602769] kvm_amd: SVM not supported by CPU 2 [ 1.603183] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c3ee517e, max_idle_ns: 440795257231 ns [ 1.603770] clocksource: Switched to clocksource tsc [ 1.610065] Initialise system trusted keyrings [ 1.610866] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.611909] NFS: Registering the id_resolver key type [ 1.612264] Key type id_resolver registered [ 1.612689] Key type id_legacy registered [ 1.613328] 9p: Installing v9fs 9p2000 file system support [ 1.645912] Key type asymmetric registered [ 1.646286] Asymmetric key parser 'x509' registered [ 1.646795] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.647311] io scheduler mq-deadline registered [ 1.647572] io scheduler kyber registered [ 1.649344] xen: registering gsi 53 triggering 0 polarity 1 [ 1.649501] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.651448] xen: registering gsi 54 triggering 0 polarity 1 [ 1.651559] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.653971] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.654644] ACPI: button: Power Button [PWRB] [ 1.655240] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.655953] ACPI: button: Power Button [PWRF] [ 1.664046] xen:xen_evtchn: Event-channel device installed [ 1.664654] xen_pciback: backend is vpci [ 1.665916] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.666360] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.667264] hpet_acpi_add: no address or irqs in _CRS [ 1.667454] Non-volatile memory driver v1.3 [ 1.671194] loop: module loaded [ 1.683696] ahci 0000:00:11.0: version 3.0 [ 1.683868] xen: registering gsi 22 triggering 0 polarity 1 [ 1.683926] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.684104] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.684267] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.684389] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.686340] scsi host0: ahci [ 1.686965] scsi host1: ahci [ 1.687588] scsi host2: ahci [ 1.688035] scsi host3: ahci [ 1.688235] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 4 [ 1.688393] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 4 [ 1.688559] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 4 [ 1.688735] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 4 [ 1.689388] tun: Universal TUN/TAP device driver, 1.6 [ 1.689644] e100: Intel(R) PRO/100 Network Driver [ 1.689759] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.689889] sky2: driver version 1.30 [ 1.690085] xen_netfront: Initialising Xen virtual ethernet driver [ 1.690514] xen: registering gsi 16 triggering 0 polarity 1 [ 1.690540] Already setup the GSI :16 [ 1.690712] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.690889] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.691075] xen: registering gsi 19 triggering 0 polarity 1 [ 1.691089] xen: registering gsi 17 triggering 0 polarity 1 [ 1.691090] Already setup the GSI :19 [ 1.691126] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.691240] Already setup the GSI :17 [ 1.745842] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.746020] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.746189] usb usb1: Product: OHCI PCI host controller [ 1.746295] usb usb1: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.746403] usb usb1: SerialNumber: 0000:00:12.0 [ 1.746824] hub 1-0:1.0: USB hub found [ 1.746943] hub 1-0:1.0: 3 ports detected [ 1.747279] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.747542] xen: registering gsi 16 triggering 0 polarity 1 [ 1.747556] Already setup the GSI :16 [ 1.747688] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.747874] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.748042] ehci-pci 0000:00:13.2: debug port 1 [ 1.748262] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 1.753593] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.753849] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 1.753997] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.754140] usb usb2: Product: EHCI Host Controller [ 1.754259] usb usb2: Manufacturer: Linux 6.11.0+ ehci_hcd [ 1.754366] usb usb2: SerialNumber: 0000:00:13.2 [ 1.754759] hub 2-0:1.0: USB hub found [ 1.754876] hub 2-0:1.0: 6 ports detected [ 1.810819] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.811554] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3 [ 1.811868] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.812355] ehci-pci 0000:00:12.2: debug port 1 [ 1.812913] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.819556] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.819796] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 1.819943] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.820085] usb usb3: Product: EHCI Host Controller [ 1.820191] usb usb3: Manufacturer: Linux 6.11.0+ ehci_hcd [ 1.820298] usb usb3: SerialNumber: 0000:00:12.2 [ 1.820654] hub 3-0:1.0: USB hub found [ 1.820773] hub 3-0:1.0: 6 ports detected [ 1.828366] Freeing initrd memory: 20940K [ 1.869716] hub 1-0:1.0: USB hub found [ 1.869859] hub 1-0:1.0: 3 ports detected [ 1.870332] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.871221] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.871812] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 1.926830] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.927038] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.927181] usb usb4: Product: OHCI PCI host controller [ 1.927287] usb usb4: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.927395] usb usb4: SerialNumber: 0000:00:12.1 [ 1.927967] hub 4-0:1.0: USB hub found [ 1.928085] hub 4-0:1.0: 3 ports detected [ 1.928666] xen: registering gsi 18 triggering 0 polarity 1 [ 1.928675] Already setup the GSI :18 [ 1.928864] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.929184] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.929879] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 1.984682] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.984854] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.984996] usb usb5: Product: OHCI PCI host controller [ 1.985102] usb usb5: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.985209] usb usb5: SerialNumber: 0000:00:13.0 [ 1.985669] hub 5-0:1.0: USB hub found [ 1.985791] hub 5-0:1.0: 3 ports detected [ 1.986221] xen: registering gsi 18 triggering 0 polarity 1 [ 1.986231] Already setup the GSI :18 [ 1.986393] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.986637] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.986862] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 1.995787] ata4: SATA link down (SStatus 0 SControl 300) [ 1.995961] ata3: SATA link down (SStatus 0 SControl 300) [ 2.041712] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 2.041885] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.042026] usb usb6: Product: OHCI PCI host controller [ 2.042130] usb usb6: Manufacturer: Linux 6.11.0+ ohci_hcd [ 2.042236] usb usb6: SerialNumber: 0000:00:13.1 [ 2.042730] hub 6-0:1.0: USB hub found [ 2.042847] hub 6-0:1.0: 3 ports detected [ 2.043321] xen: registering gsi 18 triggering 0 polarity 1 [ 2.043329] Already setup the GSI :18 [ 2.043473] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.043692] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.043873] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 2.098668] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 2.098821] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.098961] usb usb7: Product: OHCI PCI host controller [ 2.099066] usb usb7: Manufacturer: Linux 6.11.0+ ohci_hcd [ 2.099194] usb usb7: SerialNumber: 0000:00:14.5 [ 2.099506] hub 7-0:1.0: USB hub found [ 2.099635] hub 7-0:1.0: 2 ports detected [ 2.099945] usbcore: registered new interface driver usblp [ 2.100075] usbcore: registered new interface driver usb-storage [ 2.100297] i8042: PNP: No PS/2 controller found. [ 2.100426] i8042: Probing ports directly. [ 2.103546] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.103662] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.103996] rtc_cmos 00:02: RTC can wake from S4 [ 2.104607] rtc_cmos 00:02: registered as rtc0 [ 2.104758] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 2.104911] device-mapper: uevent: version 1.0.3 [ 2.105097] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 2.105250] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 2.105433] hid: raw HID events driver (C) Jiri Kosina [ 2.105820] usbcore: registered new interface driver usbhid [ 2.105927] usbhid: USB HID core driver [ 2.106650] Initializing XFRM netlink socket [ 2.106773] NET: Registered PF_INET6 protocol family [ 2.107435] Segment Routing with IPv6 [ 2.107569] In-situ OAM (IOAM) with IPv6 [ 2.107709] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.108028] NET: Registered PF_PACKET protocol family [ 2.108162] 9pnet: Installing 9P2000 support [ 2.108281] Key type dns_resolver registered [ 2.108396] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 2.108984] IPI shorthand broadcast: enabled [ 2.113606] sched_clock: Marking stable (2088003531, 25518742)->(2124140847, -10618574) [ 2.114127] registered taskstats version 1 [ 2.114230] Loading compiled-in X.509 certificates [ 2.116529] PM: Magic number: 8:983:544 [ 2.116692] printk: legacy console [netcon0] enabled [ 2.116797] netconsole: network logging started [ 2.117072] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.127516] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.127920] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 2.129883] ALSA device list: [ 2.130020] No soundcards found. [ 2.130822] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 2.148659] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.148821] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.149364] ata2.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133 [ 2.149876] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.150699] ata2.00: configured for UDMA/133 [ 2.150996] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 2.151417] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.153210] ata1.00: configured for UDMA/133 [ 2.163565] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.164105] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.164227] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.164278] sd 0:0:0:0: [sda] Write Protect is off [ 2.164480] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.164513] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.164647] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5 [ 2.164761] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.165395] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.165405] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.165689] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 2.165809] sd 1:0:0:0: [sdb] Write Protect is off [ 2.165914] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.165937] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.166127] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 2.208878] sda: sda1 sda2 < sda5 > [ 2.209290] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.220041] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.221722] Freeing unused kernel image (initmem) memory: 2700K [ 2.221857] Write protecting the kernel read-only data: 24576k [ 2.233985] Freeing unused kernel image (rodata/data gap) memory: 1900K [ 2.281561] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.346565] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.346683] Run /init as init process [ 2.346783] with arguments: [ 2.346784] /init [ 2.346786] placeholder [ 2.346787] with environment: [ 2.346789] HOME=/ [ 2.346790] TERM=linux [ 2.440683] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.440841] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.440955] usb 6-2: Product: Hermon USB hidmouse Device [ 2.441061] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.447165] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.447836] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.451361] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.607030] e1000e: Intel(R) PRO/1000 Network Driver [ 2.607159] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.607412] xen: registering gsi 48 triggering 0 polarity 1 [ 2.607459] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.607731] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.635686] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.649336] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.692404] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e8:ac [ 2.692573] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.692764] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.693043] xen: registering gsi 47 triggering 0 polarity 1 [ 2.693069] xen: --> pirq=47 -> irq=47 (gsi=47) [ 2.693260] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.739621] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.785442] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e8:ad [ 2.785614] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.785829] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.786546] random: crng init done [ 2.787819] e1000e 0000:01:00.0 enx002590aee8ac: renamed from eth0 [ 2.788906] e1000e 0000:02:00.0 enx002590aee8ad: renamed from eth1 [ 3.429063] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.434725] EXT4-fs (dm-0): mounted filesystem 162c9e73-234f-437a-8039-afef437af250 ro with ordered data mode. Quota mode: none. [ 7.700006] EXT4-fs (dm-0): re-mounted 162c9e73-234f-437a-8039-afef437af250 r/w. Quota mode: none. [ 9.209027] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.224475] EXT4-fs (sda1): mounted filesystem 79a00242-fc10-4e89-bc22-5b0e5f79262a r/w with ordered data mode. Quota mode: none. [ 9.304823] Adding 1949692k swap on /dev/mapper/pinot0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 10.856812] xenbr0: port 1(enx002590aee8ac) entered blocking state [ 10.856950] xenbr0: port 1(enx002590aee8ac) entered disabled state [ 10.857081] e1000e 0000:01:00.0 enx002590aee8ac: entered allmulticast mode [ 10.857238] e1000e 0000:01:00.0 enx002590aee8ac: entered promiscuous mode [ 13.970566] e1000e 0000:01:00.0 enx002590aee8ac: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 13.970962] xenbr0: port 1(enx002590aee8ac) entered blocking state [ 13.971099] xenbr0: port 1(enx002590aee8ac) entered forwarding state