[ 0.000000] Linux version 6.11.0+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Sun Sep 22 02:58:13 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/pinot1--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000f6000000-0x00000000f6003fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SML/H8SML, BIOS 3.5 11/25/2013 [ 0.000000] DMI: Memory slots populated: 2/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000012] Xen PV: Detected 4 vCPUS [ 0.039301] tsc: Fast TSC calibration using PIT [ 0.039302] tsc: Detected 2800.104 MHz processor [ 0.039304] tsc: Detected 2800.012 MHz TSC [ 0.039567] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.039571] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.039578] last_pfn = 0xdfeb2 max_arch_pfn = 0x400000000 [ 0.039581] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.039583] MTRRs set to read-only [ 0.039587] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.066045] RAMDISK: [mem 0x04000000-0x05472fff] [ 0.066065] ACPI: Early table checksum verification disabled [ 0.067165] ACPI: RSDP 0x00000000000FA1C0 000024 (v02 ACPIAM) [ 0.067176] ACPI: XSDT 0x00000000DFEA0100 00007C (v01 SMCI 20131125 MSFT 00000097) [ 0.067209] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.067257] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20240827/tbfadt-560) [ 0.067269] ACPI: DSDT 0x00000000DFEA0600 00562B (v01 1CF11 1CF11000 00000000 INTL 20051117) [ 0.067279] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.067288] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.067299] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.067310] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.067320] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.067330] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.067341] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.067351] ACPI: SSDT 0x00000000DFEAA6F0 000B9C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.067361] ACPI: EINJ 0x00000000DFEAB290 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.067371] ACPI: BERT 0x00000000DFEAB420 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.067381] ACPI: ERST 0x00000000DFEAB450 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.067392] ACPI: HEST 0x00000000DFEAB660 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.067397] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.067399] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c2a] [ 0.067400] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.067402] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.067403] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.067404] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.067405] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.067406] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.067408] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.067409] ACPI: Reserving SSDT table memory at [mem 0xdfeaa6f0-0xdfeab28b] [ 0.067410] ACPI: Reserving EINJ table memory at [mem 0xdfeab290-0xdfeab3bf] [ 0.067411] ACPI: Reserving BERT table memory at [mem 0xdfeab420-0xdfeab44f] [ 0.067412] ACPI: Reserving ERST table memory at [mem 0xdfeab450-0xdfeab65f] [ 0.067413] ACPI: Reserving HEST table memory at [mem 0xdfeab660-0xdfeab707] [ 0.067531] APIC: Switched APIC routing to: Xen PV [ 0.069833] Zone ranges: [ 0.069834] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.069837] DMA32 [mem 0x0000000001000000-0x00000000dfeb1fff] [ 0.069839] Normal empty [ 0.069840] Movable zone start for each node [ 0.069841] Early memory node ranges [ 0.069841] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.069844] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.069845] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.069852] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.069938] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.074174] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.074187] p2m virtual area at (____ptrval____), size is 40000000 [ 0.294470] Remapped 102 page(s) [ 0.294477] Remapped 0 non-RAM page(s) [ 0.295005] ACPI: PM-Timer IO Port: 0x808 [ 0.295037] CPU topo: CPU limit of 4 reached. Ignoring further CPUs [ 0.295067] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.295070] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.295092] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.295101] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.295112] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.295117] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.295139] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.295143] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.295156] CPU topo: Max. logical packages: 1 [ 0.295157] CPU topo: Max. logical dies: 1 [ 0.295158] CPU topo: Max. dies per package: 1 [ 0.295165] CPU topo: Max. threads per core: 1 [ 0.295166] CPU topo: Num. cores per package: 4 [ 0.295167] CPU topo: Num. threads per package: 4 [ 0.295168] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.295169] CPU topo: Rejected CPUs 4 [ 0.295186] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.295189] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.295190] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.295192] PM: hibernation: Registered nosave memory: [mem 0x20066000-0xdfe9dfff] [ 0.295193] PM: hibernation: Registered nosave memory: [mem 0xdfe9e000-0xdfe9ffff] [ 0.295194] PM: hibernation: Registered nosave memory: [mem 0xdfea0000-0xdfeb1fff] [ 0.295196] [mem 0x20066000-0xdfe9dfff] available for PCI devices [ 0.295201] Booting kernel on Xen [ 0.295202] Xen version: 4.20-unstable (preserve-AD) [ 0.295207] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.301698] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.302620] percpu: Embedded 57 pages/cpu s194520 r8192 d30760 u524288 [ 0.302629] pcpu-alloc: s194520 r8192 d30760 u524288 alloc=1*2097152 [ 0.302634] pcpu-alloc: [0] 0 1 2 3 [ 0.302720] xen: PV spinlocks enabled [ 0.302724] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.302727] Kernel command line: placeholder root=/dev/mapper/pinot1--vg-root ro console=hvc0 [ 0.302807] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.303017] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.303118] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.303327] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.303332] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.303335] software IO TLB: area num 4. [ 0.409585] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.412431] Dynamic Preempt: voluntary [ 0.412546] rcu: Preemptible hierarchical RCU implementation. [ 0.412547] rcu: RCU event tracing is enabled. [ 0.412549] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.412551] Trampoline variant of Tasks RCU enabled. [ 0.412553] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.412555] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.412575] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.419633] NR_IRQS: 4352, nr_irqs: 1000, preallocated irqs: 16 [ 0.419793] xen:events: Using FIFO-based ABI [ 0.419823] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.419835] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.419840] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.419845] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.419850] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.419855] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.419860] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.419866] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.419871] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.419876] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.419881] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.419887] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.419892] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.419897] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.419902] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.419913] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.426053] Console: colour VGA+ 80x25 [ 0.426058] printk: legacy console [tty0] enabled [ 0.440272] printk: legacy console [hvc0] enabled [ 0.440965] ACPI: Core revision 20240827 [ 0.444931] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.445088] Xen: using vcpuop timer interface [ 0.445094] installing Xen timer for CPU 0 [ 0.445339] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c4c04d54, max_idle_ns: 440795212551 ns [ 0.445502] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.02 BogoMIPS (lpj=2800012) [ 0.445695] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.445894] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.446027] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.446143] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.446511] Spectre V2 : Mitigation: Retpolines [ 0.446615] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.446759] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.446869] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.446979] RETBleed: Mitigation: untrained return thunk [ 0.447087] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.447232] Speculative Store Bypass: Vulnerable [ 0.447380] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.447503] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.447613] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.447723] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.447833] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.473659] Freeing SMP alternatives memory: 40K [ 0.473798] pid_max: default: 32768 minimum: 301 [ 0.473940] LSM: initializing lsm=capability,selinux [ 0.474101] SELinux: Initializing. [ 0.474422] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.474506] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.476633] cpu 0 spinlock event irq 57 [ 0.476747] VPMU disabled by hypervisor. [ 0.477314] Performance Events: PMU not available due to virtualization, using software events only. [ 0.477477] signal: max sigframe size: 1776 [ 0.478529] rcu: Hierarchical SRCU implementation. [ 0.478639] rcu: Max phase no-delay instances is 400. [ 0.478874] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.489517] smp: Bringing up secondary CPUs ... [ 0.491524] installing Xen timer for CPU 1 [ 0.492039] installing Xen timer for CPU 2 [ 0.492409] installing Xen timer for CPU 3 [ 0.026580] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0011 [ 0.492609] cpu 1 spinlock event irq 77 [ 0.026580] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0012 [ 0.493767] cpu 2 spinlock event irq 78 [ 0.026580] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0013 [ 0.494609] cpu 3 spinlock event irq 79 [ 0.495936] smp: Brought up 1 node, 4 CPUs [ 0.496640] Memory: 381936K/524284K available (16384K kernel code, 2784K rwdata, 6292K rodata, 2704K init, 1736K bss, 138296K reserved, 0K cma-reserved) [ 0.497699] devtmpfs: initialized [ 0.498029] x86/mm: Memory block size: 128MB [ 0.501818] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.501852] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.502511] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.502771] PM: RTC time: 04:56:39, date: 2024-09-22 [ 0.503223] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.503587] xen:grant_table: Grant tables using version 1 layout [ 0.503721] Grant table initialized [ 0.504078] audit: initializing netlink subsys (disabled) [ 0.504228] audit: type=2000 audit(1726980999.463:1): state=initialized audit_enabled=0 res=1 [ 0.504770] thermal_sys: Registered thermal governor 'step_wise' [ 0.504770] thermal_sys: Registered thermal governor 'user_space' [ 0.507145] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.507854] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.745662] PCI: Using configuration type 1 for base access [ 0.746718] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.747832] ACPI: Added _OSI(Module Device) [ 0.748504] ACPI: Added _OSI(Processor Device) [ 0.748795] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.749093] ACPI: Added _OSI(Processor Aggregator Device) [ 0.757905] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.758494] xen: registering gsi 9 triggering 0 polarity 1 [ 0.761887] ACPI: Interpreter enabled [ 0.762040] ACPI: PM: (supports S0 S1 S4 S5) [ 0.762144] ACPI: Using IOAPIC for interrupt routing [ 0.762323] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.762472] PCI: Using E820 reservations for host bridge windows [ 0.762677] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.793037] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.793383] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.793511] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.793804] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.794143] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.796422] PCI host bridge to bus 0000:00 [ 0.796538] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.796921] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.797215] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.797476] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.798519] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.798873] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.799392] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.801792] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.804102] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.804947] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.805217] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.805558] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.805934] pci 0000:00:09.0: enabling Extended Tags [ 0.806907] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.808308] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.808742] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.809133] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.809522] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.810070] pci 0000:00:0a.0: enabling Extended Tags [ 0.811965] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.813432] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f conventional PCI endpoint [ 0.813726] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.814143] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.814450] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.814635] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.815025] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.815418] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.815808] pci 0000:00:11.0: set SATA to AHCI mode [ 0.817181] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.817791] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.819479] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.819938] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.821110] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.821302] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.821676] pci 0000:00:12.2: supports D1 D2 [ 0.821780] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.822063] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.822268] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.822658] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.822848] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.825556] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.825931] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.827326] pci 0000:00:13.2: supports D1 D2 [ 0.827523] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.828773] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.831011] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.831607] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.832015] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.832431] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.832583] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.832986] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.833521] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.833740] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.834029] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.834323] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.835644] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.837874] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.838721] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.839109] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.839489] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.840697] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.841322] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.843079] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.844633] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.845900] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.847274] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.848847] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.850140] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.852382] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.853747] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.854336] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.854569] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.855876] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.857335] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.858445] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.858745] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.859150] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.859574] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.860890] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.862418] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.862729] pci_bus 0000:03: extended config space not accessible [ 0.863298] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.865741] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.866081] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.866480] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.867177] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.868715] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.869020] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.869368] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.869525] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.869838] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.870188] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.870794] pci_bus 0000:00: on NUMA node 0 [ 0.874145] xen: registering gsi 13 triggering 1 polarity 0 [ 0.875810] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.876049] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.876235] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.876446] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.876578] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.876768] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.876952] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.877135] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.877425] xen:balloon: Initialising balloon driver [ 0.877933] iommu: Default domain type: Translated [ 0.878535] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.879208] SCSI subsystem initialized [ 0.879583] libata version 3.00 loaded. [ 0.879583] ACPI: bus type USB registered [ 0.879698] usbcore: registered new interface driver usbfs [ 0.879851] usbcore: registered new interface driver hub [ 0.879967] usbcore: registered new device driver usb [ 0.880093] pps_core: LinuxPPS API ver. 1 registered [ 0.880199] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.880508] PTP clock support registered [ 0.880708] Advanced Linux Sound Architecture Driver Initialized. [ 0.883222] NetLabel: Initializing [ 0.883522] NetLabel: domain hash size = 128 [ 0.883737] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.884201] NetLabel: unlabeled traffic allowed by default [ 0.884605] PCI: Using ACPI for IRQ routing [ 0.978752] PCI: pci_cache_line_size set to 64 bytes [ 0.979499] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.979528] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.979737] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.979737] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.979833] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.979978] vgaarb: loaded [ 0.980883] clocksource: Switched to clocksource tsc-early [ 0.981231] VFS: Disk quotas dquot_6.6.0 [ 0.981267] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.981723] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.982168] pnp: PnP ACPI init [ 0.983899] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.984841] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.986601] xen: registering gsi 8 triggering 1 polarity 0 [ 0.987652] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.988693] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.989011] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.990692] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.991008] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.991304] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.991544] system 00:05: [io 0x040b] has been reserved [ 0.991862] system 00:05: [io 0x04d6] has been reserved [ 0.992194] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.992522] system 00:05: [io 0x0c14] has been reserved [ 0.992636] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.992747] system 00:05: [io 0x0c52] has been reserved [ 0.992854] system 00:05: [io 0x0c6c] has been reserved [ 0.992984] system 00:05: [io 0x0c6f] has been reserved [ 0.993091] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.993201] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.993311] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.993461] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.993584] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.993694] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.993803] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.993912] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.994021] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.994144] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.994254] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.994365] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.994477] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.994633] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.995147] xen: registering gsi 4 triggering 1 polarity 0 [ 0.995153] Already setup the GSI :4 [ 0.995255] pnp 00:06: [dma 0 disabled] [ 0.995641] xen: registering gsi 3 triggering 1 polarity 0 [ 0.995658] pnp 00:07: [dma 0 disabled] [ 0.995852] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.996282] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.996469] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.996644] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.996760] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.996880] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.997163] pnp: PnP ACPI: found 10 devices [ 1.030558] PM-Timer failed consistency check (0xffffff) - aborting. [ 1.031002] NET: Registered PF_INET protocol family [ 1.031612] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.032073] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.032225] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.032387] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 1.032589] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.032791] TCP: Hash tables configured (established 4096 bind 4096) [ 1.032968] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.033084] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.033271] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.034031] RPC: Registered named UNIX socket transport module. [ 1.034149] RPC: Registered udp transport module. [ 1.034253] RPC: Registered tcp transport module. [ 1.034355] RPC: Registered tcp-with-tls transport module. [ 1.034475] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.035413] pci 0000:00:09.0: PCI bridge to [bus 01] [ 1.035625] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 1.035764] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 1.035895] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 1.036003] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 1.036121] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 1.036252] pci 0000:00:14.4: PCI bridge to [bus 03] [ 1.036371] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 1.036526] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 1.036929] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.037317] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.037584] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.037704] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 1.037824] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 1.037939] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 1.038045] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 1.038181] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 1.038288] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 1.038399] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 1.038528] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 1.038673] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 1.038784] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 1.038895] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.039006] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 1.039119] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 1.039461] xen: registering gsi 16 triggering 0 polarity 1 [ 1.039539] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.701733] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 646860 usecs [ 1.701970] xen: registering gsi 16 triggering 0 polarity 1 [ 1.701981] Already setup the GSI :16 [ 1.724768] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 22317 usecs [ 1.725018] xen: registering gsi 17 triggering 0 polarity 1 [ 1.725079] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.725266] xen: registering gsi 18 triggering 0 polarity 1 [ 1.725283] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.748012] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 22259 usecs [ 1.748645] xen: registering gsi 18 triggering 0 polarity 1 [ 1.748655] Already setup the GSI :18 [ 1.770740] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 21669 usecs [ 1.770980] xen: registering gsi 19 triggering 0 polarity 1 [ 1.771035] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.771251] xen: registering gsi 18 triggering 0 polarity 1 [ 1.771256] Already setup the GSI :18 [ 1.794135] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 22396 usecs [ 1.794589] PCI: CLS 64 bytes, default 64 [ 1.794737] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.794823] Unpacking initramfs... [ 1.794846] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 1.795207] kvm_intel: VMX not supported by CPU 2 [ 1.795312] kvm_amd: SVM not supported by CPU 2 [ 1.795419] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c4c04d54, max_idle_ns: 440795212551 ns [ 1.795656] clocksource: Switched to clocksource tsc [ 1.802346] Initialise system trusted keyrings [ 1.802803] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.803644] NFS: Registering the id_resolver key type [ 1.803799] Key type id_resolver registered [ 1.803921] Key type id_legacy registered [ 1.804360] 9p: Installing v9fs 9p2000 file system support [ 1.825236] Key type asymmetric registered [ 1.825398] Asymmetric key parser 'x509' registered [ 1.825580] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.825759] io scheduler mq-deadline registered [ 1.825869] io scheduler kyber registered [ 1.827096] xen: registering gsi 53 triggering 0 polarity 1 [ 1.827258] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.828927] xen: registering gsi 54 triggering 0 polarity 1 [ 1.829058] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.831506] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.832069] ACPI: button: Power Button [PWRB] [ 1.832726] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.833704] ACPI: button: Power Button [PWRF] [ 1.840443] xen:xen_evtchn: Event-channel device installed [ 1.840688] xen_pciback: backend is vpci [ 1.842705] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.843195] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.844108] hpet_acpi_add: no address or irqs in _CRS [ 1.844338] Non-volatile memory driver v1.3 [ 1.848310] loop: module loaded [ 1.870051] ahci 0000:00:11.0: version 3.0 [ 1.870226] xen: registering gsi 22 triggering 0 polarity 1 [ 1.870278] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.870453] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.870678] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.870796] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.872419] scsi host0: ahci [ 1.873046] scsi host1: ahci [ 1.873687] scsi host2: ahci [ 1.874115] scsi host3: ahci [ 1.874317] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 4 [ 1.874474] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 4 [ 1.874642] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 4 [ 1.874862] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 4 [ 1.875530] tun: Universal TUN/TAP device driver, 1.6 [ 1.875885] e100: Intel(R) PRO/100 Network Driver [ 1.875999] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.876180] sky2: driver version 1.30 [ 1.876370] xen_netfront: Initialising Xen virtual ethernet driver [ 1.876920] xen: registering gsi 16 triggering 0 polarity 1 [ 1.876932] Already setup the GSI :16 [ 1.877100] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.877344] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.877455] xen: registering gsi 17 triggering 0 polarity 1 [ 1.877557] Already setup the GSI :17 [ 1.877650] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.878234] xen: registering gsi 19 triggering 0 polarity 1 [ 1.878242] Already setup the GSI :19 [ 1.933174] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.933703] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.933907] usb usb1: Product: OHCI PCI host controller [ 1.934238] usb usb1: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.934558] usb usb1: SerialNumber: 0000:00:12.0 [ 1.935958] hub 1-0:1.0: USB hub found [ 1.936365] hub 1-0:1.0: 3 ports detected [ 1.937059] xen: registering gsi 16 triggering 0 polarity 1 [ 1.937067] Already setup the GSI :16 [ 1.937116] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.937565] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2 [ 1.937739] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.937918] ehci-pci 0000:00:12.2: debug port 1 [ 1.938185] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.943689] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.943931] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 1.944122] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.944273] usb usb2: Product: EHCI Host Controller [ 1.944394] usb usb2: Manufacturer: Linux 6.11.0+ ehci_hcd [ 1.944535] usb usb2: SerialNumber: 0000:00:12.2 [ 1.945149] hub 2-0:1.0: USB hub found [ 1.945274] hub 2-0:1.0: 6 ports detected [ 1.990450] Freeing initrd memory: 20940K [ 1.994778] hub 1-0:1.0: USB hub found [ 1.994913] hub 1-0:1.0: 3 ports detected [ 1.995225] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.995482] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 1.995658] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.995857] ehci-pci 0000:00:13.2: debug port 1 [ 1.996101] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 2.001700] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.001952] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 2.002100] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.002242] usb usb3: Product: EHCI Host Controller [ 2.002351] usb usb3: Manufacturer: Linux 6.11.0+ ehci_hcd [ 2.002474] usb usb3: SerialNumber: 0000:00:13.2 [ 2.003408] hub 3-0:1.0: USB hub found [ 2.003971] hub 3-0:1.0: 6 ports detected [ 2.005875] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 2.006340] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 2.006538] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 2.061863] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 2.062063] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.062204] usb usb4: Product: OHCI PCI host controller [ 2.062310] usb usb4: Manufacturer: Linux 6.11.0+ ohci_hcd [ 2.062414] usb usb4: SerialNumber: 0000:00:12.1 [ 2.062790] hub 4-0:1.0: USB hub found [ 2.062903] hub 4-0:1.0: 3 ports detected [ 2.063394] xen: registering gsi 18 triggering 0 polarity 1 [ 2.063402] Already setup the GSI :18 [ 2.063548] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.063793] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 2.064011] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 2.118774] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 2.118964] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.119103] usb usb5: Product: OHCI PCI host controller [ 2.119230] usb usb5: Manufacturer: Linux 6.11.0+ ohci_hcd [ 2.119335] usb usb5: SerialNumber: 0000:00:13.0 [ 2.119623] hub 5-0:1.0: USB hub found [ 2.119736] hub 5-0:1.0: 3 ports detected [ 2.120072] xen: registering gsi 18 triggering 0 polarity 1 [ 2.120077] Already setup the GSI :18 [ 2.120215] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 2.120397] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 2.120597] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 2.175754] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 2.175907] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.176048] usb usb6: Product: OHCI PCI host controller [ 2.176153] usb usb6: Manufacturer: Linux 6.11.0+ ohci_hcd [ 2.176258] usb usb6: SerialNumber: 0000:00:13.1 [ 2.176523] hub 6-0:1.0: USB hub found [ 2.176673] hub 6-0:1.0: 3 ports detected [ 2.177048] xen: registering gsi 18 triggering 0 polarity 1 [ 2.177053] Already setup the GSI :18 [ 2.177190] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.177375] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.177549] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 2.186518] ata4: SATA link down (SStatus 0 SControl 300) [ 2.186680] ata3: SATA link down (SStatus 0 SControl 300) [ 2.232761] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 2.232940] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.233080] usb usb7: Product: OHCI PCI host controller [ 2.233186] usb usb7: Manufacturer: Linux 6.11.0+ ohci_hcd [ 2.233290] usb usb7: SerialNumber: 0000:00:14.5 [ 2.233617] hub 7-0:1.0: USB hub found [ 2.233763] hub 7-0:1.0: 2 ports detected [ 2.234114] usbcore: registered new interface driver usblp [ 2.234244] usbcore: registered new interface driver usb-storage [ 2.234462] i8042: PNP: No PS/2 controller found. [ 2.234565] i8042: Probing ports directly. [ 2.237680] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.237797] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.238155] rtc_cmos 00:02: RTC can wake from S4 [ 2.238798] rtc_cmos 00:02: registered as rtc0 [ 2.238975] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 2.239127] device-mapper: uevent: version 1.0.3 [ 2.239321] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 2.239514] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 2.239680] hid: raw HID events driver (C) Jiri Kosina [ 2.239995] usbcore: registered new interface driver usbhid [ 2.240102] usbhid: USB HID core driver [ 2.240740] Initializing XFRM netlink socket [ 2.240896] NET: Registered PF_INET6 protocol family [ 2.241630] Segment Routing with IPv6 [ 2.241745] In-situ OAM (IOAM) with IPv6 [ 2.241881] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.242142] NET: Registered PF_PACKET protocol family [ 2.242312] 9pnet: Installing 9P2000 support [ 2.242431] Key type dns_resolver registered [ 2.242546] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 2.243121] IPI shorthand broadcast: enabled [ 2.247870] sched_clock: Marking stable (2222010404, 25580744)->(2263822132, -16230984) [ 2.248433] registered taskstats version 1 [ 2.248538] Loading compiled-in X.509 certificates [ 2.250805] PM: Magic number: 8:983:919 [ 2.250965] printk: legacy console [netcon0] enabled [ 2.251070] netconsole: network logging started [ 2.251377] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.262024] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.262437] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 2.264650] ALSA device list: [ 2.264767] No soundcards found. [ 2.264774] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 2.332667] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.332807] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.333525] ata2.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133 [ 2.334088] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 2.334244] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.334626] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.335107] ata2.00: configured for UDMA/133 [ 2.336293] ata1.00: configured for UDMA/133 [ 2.346648] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.347214] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.347246] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.347493] sd 0:0:0:0: [sda] Write Protect is off [ 2.347625] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.347655] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.347712] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5 [ 2.347943] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.348506] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.348542] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.348796] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 2.348951] sd 1:0:0:0: [sdb] Write Protect is off [ 2.349095] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.349118] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.349303] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 2.390884] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.393515] sda: sda1 sda2 < sda5 > [ 2.393936] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.395629] Freeing unused kernel image (initmem) memory: 2704K [ 2.395766] Write protecting the kernel read-only data: 24576k [ 2.408160] Freeing unused kernel image (rodata/data gap) memory: 1900K [ 2.489617] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.522647] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.522766] Run /init as init process [ 2.522866] with arguments: [ 2.522867] /init [ 2.522869] placeholder [ 2.522870] with environment: [ 2.522871] HOME=/ [ 2.522873] TERM=linux [ 2.650763] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.650924] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.651039] usb 6-2: Product: Hermon USB hidmouse Device [ 2.651145] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.657222] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.659796] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.663227] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.789454] e1000e: Intel(R) PRO/1000 Network Driver [ 2.789594] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.789831] xen: registering gsi 48 triggering 0 polarity 1 [ 2.789872] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.790134] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.821763] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.836518] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.879490] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e9:2a [ 2.879654] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.879846] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.880053] xen: registering gsi 47 triggering 0 polarity 1 [ 2.880079] xen: --> pirq=47 -> irq=47 (gsi=47) [ 2.880306] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.925638] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.954621] random: crng init done [ 2.971566] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e9:2b [ 2.971734] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.971949] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.973994] e1000e 0000:02:00.0 enx002590aee92b: renamed from eth1 [ 2.974302] e1000e 0000:01:00.0 enx002590aee92a: renamed from eth0 [ 3.615638] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.627418] EXT4-fs (dm-0): mounted filesystem de917711-ec5d-4a30-a937-0ee97352a5ff ro with ordered data mode. Quota mode: none. [ 8.063837] EXT4-fs (dm-0): re-mounted de917711-ec5d-4a30-a937-0ee97352a5ff r/w. Quota mode: none. [ 9.573429] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.596416] EXT4-fs (sda1): mounted filesystem 9643a77c-09f3-4c01-baa2-8fb8fae07e91 r/w with ordered data mode. Quota mode: none. [ 9.678729] Adding 1949692k swap on /dev/mapper/pinot1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.292979] xenbr0: port 1(enx002590aee92a) entered blocking state [ 11.293159] xenbr0: port 1(enx002590aee92a) entered disabled state [ 11.293276] e1000e 0000:01:00.0 enx002590aee92a: entered allmulticast mode [ 11.293434] e1000e 0000:01:00.0 enx002590aee92a: entered promiscuous mode [ 14.406634] e1000e 0000:01:00.0 enx002590aee92a: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 14.407049] xenbr0: port 1(enx002590aee92a) entered blocking state [ 14.407182] xenbr0: port 1(enx002590aee92a) entered forwarding state