[ 0.000000] Linux version 6.11.0+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Sun Sep 22 02:58:13 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/rimava1--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000095fff] usable [ 0.000000] Xen: [mem 0x0000000000096000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020069fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SCM/H8SCM, BIOS 3.5 11/25/2013 [ 0.000000] DMI: Memory slots populated: 1/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000014] Xen PV: Detected 6 vCPUS [ 0.037588] tsc: Fast TSC calibration using PIT [ 0.037590] tsc: Detected 3101.322 MHz processor [ 0.037592] tsc: Detected 3101.142 MHz TSC [ 0.037807] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.037811] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.037817] last_pfn = 0xdfeb2 max_arch_pfn = 0x400000000 [ 0.037822] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.037824] MTRRs set to read-only [ 0.037828] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.062848] RAMDISK: [mem 0x04000000-0x05472fff] [ 0.062877] ACPI: Early table checksum verification disabled [ 0.064362] ACPI: RSDP 0x00000000000FA1D0 000024 (v02 ACPIAM) [ 0.064375] ACPI: XSDT 0x00000000DFEA0100 000084 (v01 SMCI 20131125 MSFT 00000097) [ 0.064419] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.064481] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20240827/tbfadt-560) [ 0.064492] ACPI: DSDT 0x00000000DFEA0600 005699 (v01 1BA11 1BA11000 00000000 INTL 20051117) [ 0.064503] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.064512] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.064524] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.064534] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.064545] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.064556] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.064566] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.064577] ACPI: SRAT 0x00000000DFEAA6F0 000108 (v02 AMD AGESA 00000001 AMD 00000001) [ 0.064588] ACPI: SSDT 0x00000000DFEAA800 001158 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.064598] ACPI: EINJ 0x00000000DFEAB960 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.064608] ACPI: BERT 0x00000000DFEABAF0 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.064618] ACPI: ERST 0x00000000DFEABB20 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.064628] ACPI: HEST 0x00000000DFEABD30 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.064633] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.064635] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c98] [ 0.064637] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.064638] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.064639] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.064641] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.064642] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.064643] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.064644] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.064645] ACPI: Reserving SRAT table memory at [mem 0xdfeaa6f0-0xdfeaa7f7] [ 0.064646] ACPI: Reserving SSDT table memory at [mem 0xdfeaa800-0xdfeab957] [ 0.064647] ACPI: Reserving EINJ table memory at [mem 0xdfeab960-0xdfeaba8f] [ 0.064648] ACPI: Reserving BERT table memory at [mem 0xdfeabaf0-0xdfeabb1f] [ 0.064649] ACPI: Reserving ERST table memory at [mem 0xdfeabb20-0xdfeabd2f] [ 0.064650] ACPI: Reserving HEST table memory at [mem 0xdfeabd30-0xdfeabdd7] [ 0.064786] APIC: Switched APIC routing to: Xen PV [ 0.067057] Zone ranges: [ 0.067058] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.067061] DMA32 [mem 0x0000000001000000-0x00000000dfeb1fff] [ 0.067063] Normal empty [ 0.067064] Movable zone start for each node [ 0.067065] Early memory node ranges [ 0.067066] node 0: [mem 0x0000000000001000-0x0000000000095fff] [ 0.067069] node 0: [mem 0x0000000000100000-0x0000000020069fff] [ 0.067072] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020069fff] [ 0.067087] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.067212] On node 0, zone DMA: 106 pages in unavailable ranges [ 0.072837] On node 0, zone DMA32: 32662 pages in unavailable ranges [ 0.072856] p2m virtual area at (____ptrval____), size is 40000000 [ 0.280271] Remapped 106 page(s) [ 0.280281] Remapped 0 non-RAM page(s) [ 0.280795] ACPI: PM-Timer IO Port: 0x808 [ 0.280840] CPU topo: CPU limit of 6 reached. Ignoring further CPUs [ 0.280874] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.280878] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.280904] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.280913] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.280927] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.280933] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.280958] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.280962] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.280979] CPU topo: Max. logical packages: 1 [ 0.280980] CPU topo: Max. logical dies: 1 [ 0.280981] CPU topo: Max. dies per package: 1 [ 0.280989] CPU topo: Max. threads per core: 1 [ 0.280991] CPU topo: Num. cores per package: 6 [ 0.280992] CPU topo: Num. threads per package: 6 [ 0.280993] CPU topo: Allowing 6 present CPUs plus 0 hotplug CPUs [ 0.280994] CPU topo: Rejected CPUs 2 [ 0.281014] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.281018] PM: hibernation: Registered nosave memory: [mem 0x00096000-0x000fffff] [ 0.281020] PM: hibernation: Registered nosave memory: [mem 0x2006a000-0xdfe9dfff] [ 0.281021] PM: hibernation: Registered nosave memory: [mem 0xdfe9e000-0xdfe9ffff] [ 0.281022] PM: hibernation: Registered nosave memory: [mem 0xdfea0000-0xdfeb1fff] [ 0.281024] [mem 0x2006a000-0xdfe9dfff] available for PCI devices [ 0.281030] Booting kernel on Xen [ 0.281032] Xen version: 4.20-unstable (preserve-AD) [ 0.281038] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.287452] setup_percpu: NR_CPUS:64 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1 [ 0.288802] percpu: Embedded 57 pages/cpu s194520 r8192 d30760 u262144 [ 0.288813] pcpu-alloc: s194520 r8192 d30760 u262144 alloc=1*2097152 [ 0.288819] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.288931] xen: PV spinlocks enabled [ 0.288936] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.288940] Kernel command line: placeholder root=/dev/mapper/rimava1--vg-root ro console=hvc0 [ 0.289040] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.289109] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.289237] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.289500] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.289504] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.289509] software IO TLB: area num 8. [ 0.429374] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.432559] Dynamic Preempt: voluntary [ 0.432708] rcu: Preemptible hierarchical RCU implementation. [ 0.432709] rcu: RCU event tracing is enabled. [ 0.432711] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.432714] Trampoline variant of Tasks RCU enabled. [ 0.432716] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.432717] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.432747] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=6. [ 0.439641] NR_IRQS: 4352, nr_irqs: 1016, preallocated irqs: 16 [ 0.439826] xen:events: Using FIFO-based ABI [ 0.439865] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.439871] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.439885] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.439890] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.439895] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.439900] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.439905] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.439910] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.439914] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.439919] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.439925] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.439930] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.439934] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.439939] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.439945] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.439960] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.446036] Console: colour VGA+ 80x25 [ 0.446044] printk: legacy console [tty0] enabled [ 0.459996] printk: legacy console [hvc0] enabled [ 0.460650] ACPI: Core revision 20240827 [ 0.466335] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.466493] Xen: using vcpuop timer interface [ 0.466501] installing Xen timer for CPU 0 [ 0.466755] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cb37e8e42b, max_idle_ns: 440795254910 ns [ 0.466915] Calibrating delay loop (skipped), value calculated using timer frequency.. 6202.28 BogoMIPS (lpj=3101142) [ 0.467110] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.467330] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.467440] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.467556] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.467928] Spectre V2 : Mitigation: Retpolines [ 0.468032] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.468174] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.468285] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.468395] RETBleed: Mitigation: untrained return thunk [ 0.468501] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.468651] Speculative Store Bypass: Vulnerable [ 0.468789] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.468917] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.469027] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.469136] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.469245] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.497705] Freeing SMP alternatives memory: 40K [ 0.497863] pid_max: default: 32768 minimum: 301 [ 0.497968] LSM: initializing lsm=capability,selinux [ 0.498121] SELinux: Initializing. [ 0.498463] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.498611] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.500063] cpu 0 spinlock event irq 57 [ 0.500178] VPMU disabled by hypervisor. [ 0.500745] Performance Events: PMU not available due to virtualization, using software events only. [ 0.500906] signal: max sigframe size: 1776 [ 0.501942] rcu: Hierarchical SRCU implementation. [ 0.502052] rcu: Max phase no-delay instances is 400. [ 0.502292] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.512571] smp: Bringing up secondary CPUs ... [ 0.512935] installing Xen timer for CPU 1 [ 0.513430] installing Xen timer for CPU 2 [ 0.513887] installing Xen timer for CPU 3 [ 0.515988] installing Xen timer for CPU 4 [ 0.516398] installing Xen timer for CPU 5 [ 0.027944] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0011 [ 0.516627] cpu 1 spinlock event irq 87 [ 0.027944] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0012 [ 0.517003] cpu 2 spinlock event irq 88 [ 0.027944] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0013 [ 0.518241] cpu 3 spinlock event irq 89 [ 0.027944] [Firmware Bug]: CPU 4: APIC ID mismatch. CPUID: 0x0004 APIC: 0x0014 [ 0.518967] cpu 4 spinlock event irq 90 [ 0.027944] [Firmware Bug]: CPU 5: APIC ID mismatch. CPUID: 0x0005 APIC: 0x0015 [ 0.519980] cpu 5 spinlock event irq 91 [ 0.521256] smp: Brought up 1 node, 6 CPUs [ 0.521470] Memory: 379860K/524284K available (16384K kernel code, 2784K rwdata, 6292K rodata, 2704K init, 1736K bss, 138752K reserved, 0K cma-reserved) [ 0.522054] devtmpfs: initialized [ 0.522085] x86/mm: Memory block size: 128MB [ 0.523553] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.523960] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.524119] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.524398] PM: RTC time: 04:46:54, date: 2024-09-22 [ 0.525164] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.525896] xen:grant_table: Grant tables using version 1 layout [ 0.526550] Grant table initialized [ 0.527717] audit: initializing netlink subsys (disabled) [ 0.528061] audit: type=2000 audit(1726980414.391:1): state=initialized audit_enabled=0 res=1 [ 0.528151] thermal_sys: Registered thermal governor 'step_wise' [ 0.528151] thermal_sys: Registered thermal governor 'user_space' [ 0.529217] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.529482] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.606313] PCI: Using configuration type 1 for base access [ 0.606511] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.607986] ACPI: Added _OSI(Module Device) [ 0.608096] ACPI: Added _OSI(Processor Device) [ 0.608201] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.608304] ACPI: Added _OSI(Processor Aggregator Device) [ 0.625493] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.626553] xen: registering gsi 9 triggering 0 polarity 1 [ 0.637904] ACPI: Interpreter enabled [ 0.638420] ACPI: PM: (supports S0 S1 S4 S5) [ 0.638775] ACPI: Using IOAPIC for interrupt routing [ 0.639221] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.639633] PCI: Using E820 reservations for host bridge windows [ 0.641378] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.661790] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.661924] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.662082] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.662195] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.662338] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.663793] PCI host bridge to bus 0000:00 [ 0.663904] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.663916] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.664028] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.664170] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.664323] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.664467] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.664638] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.666047] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.666553] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.666774] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.666897] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.667024] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.667186] pci 0000:00:09.0: enabling Extended Tags [ 0.667411] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.667731] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.668449] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.668812] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.668990] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.669232] pci 0000:00:0a.0: enabling Extended Tags [ 0.669460] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.669831] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 conventional PCI endpoint [ 0.669959] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.670090] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.670261] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.670389] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.670517] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.670645] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.671001] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.671191] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.671609] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.671797] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.672194] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.672383] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.672711] pci 0000:00:12.2: supports D1 D2 [ 0.672814] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.673079] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.673267] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.673648] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.673834] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.674205] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.674400] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.674723] pci 0000:00:13.2: supports D1 D2 [ 0.674825] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.675092] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.675594] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.675788] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.675922] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.676049] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.676176] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.676302] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.676461] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.676573] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.676682] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.676791] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.677091] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.677595] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.677823] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.677932] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.678054] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.678329] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.678521] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.678928] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.679311] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.679618] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.679932] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.680284] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.680645] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.681156] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.681351] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.681512] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.681646] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.682008] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.683963] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.684263] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.684458] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.684970] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.685104] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.685483] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.686956] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.687121] pci_bus 0000:03: extended config space not accessible [ 0.687289] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.687482] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.687618] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.687752] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.687987] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.688382] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.688515] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.688661] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.688808] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.688915] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.689065] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.689282] pci_bus 0000:00: on NUMA node 0 [ 0.689875] xen: registering gsi 13 triggering 1 polarity 0 [ 0.690398] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.690598] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.690780] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.691000] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.691190] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.691383] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.691573] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.691752] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.692020] xen:balloon: Initialising balloon driver [ 0.692163] iommu: Default domain type: Translated [ 0.692209] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.693034] SCSI subsystem initialized [ 0.693154] libata version 3.00 loaded. [ 0.693154] ACPI: bus type USB registered [ 0.693154] usbcore: registered new interface driver usbfs [ 0.693259] usbcore: registered new interface driver hub [ 0.693382] usbcore: registered new device driver usb [ 0.693941] pps_core: LinuxPPS API ver. 1 registered [ 0.694045] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.694196] PTP clock support registered [ 0.694331] Advanced Linux Sound Architecture Driver Initialized. [ 0.695253] NetLabel: Initializing [ 0.695355] NetLabel: domain hash size = 128 [ 0.695457] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.695580] NetLabel: unlabeled traffic allowed by default [ 0.695722] PCI: Using ACPI for IRQ routing [ 0.754748] PCI: pci_cache_line_size set to 64 bytes [ 0.754934] e820: reserve RAM buffer [mem 0x00096000-0x0009ffff] [ 0.754944] e820: reserve RAM buffer [mem 0x2006a000-0x23ffffff] [ 0.755108] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.755108] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.755219] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.755366] vgaarb: loaded [ 0.757181] clocksource: Switched to clocksource tsc-early [ 0.757490] VFS: Disk quotas dquot_6.6.0 [ 0.757600] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.757866] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.758004] pnp: PnP ACPI init [ 0.758478] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.758702] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.759311] xen: registering gsi 8 triggering 1 polarity 0 [ 0.759612] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.759966] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.760082] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.760589] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.760702] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.760812] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.760973] system 00:05: [io 0x040b] has been reserved [ 0.761080] system 00:05: [io 0x04d6] has been reserved [ 0.761186] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.761294] system 00:05: [io 0x0c14] has been reserved [ 0.761403] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.761511] system 00:05: [io 0x0c52] has been reserved [ 0.761620] system 00:05: [io 0x0c6c] has been reserved [ 0.761725] system 00:05: [io 0x0c6f] has been reserved [ 0.761831] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.761954] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.762063] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.762173] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.762319] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.762427] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.762536] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.762645] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.762754] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.762863] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.762981] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.763091] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.763202] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.763314] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.763742] xen: registering gsi 4 triggering 1 polarity 0 [ 0.763746] Already setup the GSI :4 [ 0.763845] pnp 00:06: [dma 0 disabled] [ 0.764972] xen: registering gsi 3 triggering 1 polarity 0 [ 0.764981] pnp 00:07: [dma 0 disabled] [ 0.765179] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.765626] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.765818] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.765945] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.766059] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.766172] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.766464] pnp: PnP ACPI: found 10 devices [ 0.792442] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.792692] NET: Registered PF_INET protocol family [ 0.792930] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.793426] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.793576] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.793719] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.793887] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.794153] TCP: Hash tables configured (established 4096 bind 4096) [ 0.794396] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.794549] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.794720] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.795412] RPC: Registered named UNIX socket transport module. [ 0.795584] RPC: Registered udp transport module. [ 0.795694] RPC: Registered tcp transport module. [ 0.795804] RPC: Registered tcp-with-tls transport module. [ 0.795935] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.796767] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.796986] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.797419] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.797889] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.798040] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.798169] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.798307] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.798421] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.798539] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.798698] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.798808] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.798931] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.799045] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.799158] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.799272] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.799380] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.799490] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.799598] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.799725] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.799835] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.799960] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.800069] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.800179] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.800292] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.800403] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.800746] xen: registering gsi 16 triggering 0 polarity 1 [ 0.800828] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.450199] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 634355 usecs [ 1.450460] xen: registering gsi 16 triggering 0 polarity 1 [ 1.450476] Already setup the GSI :16 [ 1.474264] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 23302 usecs [ 1.474525] xen: registering gsi 17 triggering 0 polarity 1 [ 1.474603] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.474791] xen: registering gsi 18 triggering 0 polarity 1 [ 1.474811] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.498186] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 22901 usecs [ 1.498436] xen: registering gsi 18 triggering 0 polarity 1 [ 1.498459] Already setup the GSI :18 [ 1.522724] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 23771 usecs [ 1.523190] xen: registering gsi 19 triggering 0 polarity 1 [ 1.523251] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.523454] xen: registering gsi 18 triggering 0 polarity 1 [ 1.523458] Already setup the GSI :18 [ 1.547464] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 23491 usecs [ 1.548015] PCI: CLS 64 bytes, default 64 [ 1.548178] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.548292] software IO TLB: mapped [mem 0x000000001b200000-0x000000001f200000] (64MB) [ 1.548334] Unpacking initramfs... [ 1.548550] kvm_intel: VMX not supported by CPU 0 [ 1.548680] kvm_amd: SVM not supported by CPU 0 [ 1.548788] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cb37e8e42b, max_idle_ns: 440795254910 ns [ 1.549126] clocksource: Switched to clocksource tsc [ 1.555390] Initialise system trusted keyrings [ 1.555846] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.556447] NFS: Registering the id_resolver key type [ 1.556571] Key type id_resolver registered [ 1.556675] Key type id_legacy registered [ 1.556860] 9p: Installing v9fs 9p2000 file system support [ 1.587471] Key type asymmetric registered [ 1.588071] Asymmetric key parser 'x509' registered [ 1.588664] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.589308] io scheduler mq-deadline registered [ 1.591276] io scheduler kyber registered [ 1.593855] xen: registering gsi 53 triggering 0 polarity 1 [ 1.594166] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.596722] xen: registering gsi 54 triggering 0 polarity 1 [ 1.596906] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.600274] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.601168] ACPI: button: Power Button [PWRB] [ 1.601944] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.603151] ACPI: button: Power Button [PWRF] [ 1.611247] xen:xen_evtchn: Event-channel device installed [ 1.612629] xen_pciback: backend is vpci [ 1.615341] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.615854] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.617472] hpet_acpi_add: no address or irqs in _CRS [ 1.617830] Non-volatile memory driver v1.3 [ 1.624278] loop: module loaded [ 1.648532] ahci 0000:00:11.0: version 3.0 [ 1.648730] xen: registering gsi 22 triggering 0 polarity 1 [ 1.648784] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.648989] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.649152] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.649266] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.651443] scsi host0: ahci [ 1.652294] scsi host1: ahci [ 1.654306] scsi host2: ahci [ 1.656135] scsi host3: ahci [ 1.656323] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 4 [ 1.656478] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 4 [ 1.656648] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 4 [ 1.656795] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 4 [ 1.657497] tun: Universal TUN/TAP device driver, 1.6 [ 1.657854] e100: Intel(R) PRO/100 Network Driver [ 1.658008] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.658140] sky2: driver version 1.30 [ 1.658318] xen_netfront: Initialising Xen virtual ethernet driver [ 1.659088] xen: registering gsi 16 triggering 0 polarity 1 [ 1.659111] Already setup the GSI :16 [ 1.659288] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.659537] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.659748] xen: registering gsi 19 triggering 0 polarity 1 [ 1.659755] Already setup the GSI :19 [ 1.659769] xen: registering gsi 17 triggering 0 polarity 1 [ 1.659855] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.660012] Already setup the GSI :17 [ 1.714740] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.715414] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.715876] usb usb1: Product: OHCI PCI host controller [ 1.716361] usb usb1: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.716759] usb usb1: SerialNumber: 0000:00:12.0 [ 1.718493] hub 1-0:1.0: USB hub found [ 1.719153] hub 1-0:1.0: 3 ports detected [ 1.720761] xen: registering gsi 16 triggering 0 polarity 1 [ 1.720778] Already setup the GSI :16 [ 1.720784] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.721493] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.722117] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.722843] ehci-pci 0000:00:13.2: debug port 1 [ 1.724117] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 1.730062] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.730325] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 1.730471] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.730612] usb usb2: Product: EHCI Host Controller [ 1.730717] usb usb2: Manufacturer: Linux 6.11.0+ ehci_hcd [ 1.730826] usb usb2: SerialNumber: 0000:00:13.2 [ 1.731999] hub 2-0:1.0: USB hub found [ 1.732410] hub 2-0:1.0: 6 ports detected [ 1.747470] Freeing initrd memory: 20940K [ 1.784813] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.785834] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3 [ 1.786342] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.786889] ehci-pci 0000:00:12.2: debug port 1 [ 1.787814] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.794123] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.795021] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 1.795431] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.795815] usb usb3: Product: EHCI Host Controller [ 1.796294] usb usb3: Manufacturer: Linux 6.11.0+ ehci_hcd [ 1.796631] usb usb3: SerialNumber: 0000:00:12.2 [ 1.798138] hub 3-0:1.0: USB hub found [ 1.798620] hub 3-0:1.0: 6 ports detected [ 1.850528] hub 1-0:1.0: USB hub found [ 1.851089] hub 1-0:1.0: 3 ports detected [ 1.852550] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.852944] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.853186] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 1.908283] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.908469] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.908610] usb usb4: Product: OHCI PCI host controller [ 1.908717] usb usb4: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.908823] usb usb4: SerialNumber: 0000:00:12.1 [ 1.909255] hub 4-0:1.0: USB hub found [ 1.909370] hub 4-0:1.0: 3 ports detected [ 1.909817] xen: registering gsi 18 triggering 0 polarity 1 [ 1.909831] Already setup the GSI :18 [ 1.910004] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.910398] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.911461] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 1.960974] ata3: SATA link down (SStatus 0 SControl 300) [ 1.966200] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.966391] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.966544] usb usb5: Product: OHCI PCI host controller [ 1.966651] usb usb5: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.966758] usb usb5: SerialNumber: 0000:00:13.0 [ 1.967198] hub 5-0:1.0: USB hub found [ 1.967314] hub 5-0:1.0: 3 ports detected [ 1.967850] xen: registering gsi 18 triggering 0 polarity 1 [ 1.967863] Already setup the GSI :18 [ 1.968046] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.968242] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.968453] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 1.968776] ata4: SATA link down (SStatus 0 SControl 300) [ 2.023213] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 2.023399] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.023540] usb usb6: Product: OHCI PCI host controller [ 2.023646] usb usb6: Manufacturer: Linux 6.11.0+ ohci_hcd [ 2.023752] usb usb6: SerialNumber: 0000:00:13.1 [ 2.024299] hub 6-0:1.0: USB hub found [ 2.024416] hub 6-0:1.0: 3 ports detected [ 2.024904] xen: registering gsi 18 triggering 0 polarity 1 [ 2.024919] Already setup the GSI :18 [ 2.025114] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.025364] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.025569] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 2.080216] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 2.080400] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.080541] usb usb7: Product: OHCI PCI host controller [ 2.080647] usb usb7: Manufacturer: Linux 6.11.0+ ohci_hcd [ 2.080753] usb usb7: SerialNumber: 0000:00:14.5 [ 2.081289] hub 7-0:1.0: USB hub found [ 2.081405] hub 7-0:1.0: 2 ports detected [ 2.081795] usbcore: registered new interface driver usblp [ 2.081926] usbcore: registered new interface driver usb-storage [ 2.082177] i8042: PNP: No PS/2 controller found. [ 2.082282] i8042: Probing ports directly. [ 2.085361] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.085473] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.085922] rtc_cmos 00:02: RTC can wake from S4 [ 2.086453] rtc_cmos 00:02: registered as rtc0 [ 2.086613] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 2.086814] device-mapper: uevent: version 1.0.3 [ 2.087102] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 2.087258] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 2.087419] hid: raw HID events driver (C) Jiri Kosina [ 2.087750] usbcore: registered new interface driver usbhid [ 2.087858] usbhid: USB HID core driver [ 2.088630] Initializing XFRM netlink socket [ 2.088755] NET: Registered PF_INET6 protocol family [ 2.090043] Segment Routing with IPv6 [ 2.090199] In-situ OAM (IOAM) with IPv6 [ 2.090352] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.090793] NET: Registered PF_PACKET protocol family [ 2.090983] 9pnet: Installing 9P2000 support [ 2.091113] Key type dns_resolver registered [ 2.091236] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 2.092854] IPI shorthand broadcast: enabled [ 2.097405] sched_clock: Marking stable (2070007634, 26944433)->(2110299346, -13347279) [ 2.099359] registered taskstats version 1 [ 2.099860] Loading compiled-in X.509 certificates [ 2.106258] PM: Magic number: 8:330:768 [ 2.106552] printk: legacy console [netcon0] enabled [ 2.106661] netconsole: network logging started [ 2.107205] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.115061] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.115997] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.117504] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 2.118031] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.119431] ata2.00: ATAPI: ATAPI iHAS124 E, 4L07, max UDMA/100 [ 2.119720] ata1.00: configured for UDMA/133 [ 2.120366] ata2.00: configured for UDMA/100 [ 2.130183] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.131060] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.131134] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.131379] sd 0:0:0:0: [sda] Write Protect is off [ 2.131497] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.131522] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.131666] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.131721] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.132127] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 2.132341] ALSA device list: [ 2.132449] No soundcards found. [ 2.132513] scsi 1:0:0:0: CD-ROM ATAPI iHAS124 E 4L07 PQ: 0 ANSI: 5 [ 2.133377] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 2.184821] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.185080] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.186232] sda: sda1 sda2 < sda5 > [ 2.187246] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.213201] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.213410] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.221359] Freeing unused kernel image (initmem) memory: 2704K [ 2.221581] Write protecting the kernel read-only data: 24576k [ 2.266184] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.273804] Freeing unused kernel image (rodata/data gap) memory: 1900K [ 2.379981] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.380447] Run /init as init process [ 2.380946] with arguments: [ 2.381194] /init [ 2.381205] placeholder [ 2.381218] with environment: [ 2.381229] HOME=/ [ 2.381241] TERM=linux [ 2.518904] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.519112] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.519227] usb 6-2: Product: Hermon USB hidmouse Device [ 2.519339] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.525406] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.525804] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.529343] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.704392] e1000e: Intel(R) PRO/1000 Network Driver [ 2.704550] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.704804] xen: registering gsi 48 triggering 0 polarity 1 [ 2.704845] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.705143] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.746776] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.751176] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.788866] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0a:48:f6 [ 2.789027] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.789216] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 2.789420] xen: registering gsi 47 triggering 0 polarity 1 [ 2.789448] xen: --> pirq=47 -> irq=47 (gsi=47) [ 2.789630] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.835098] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.881075] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0a:48:f7 [ 2.881225] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.881415] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 2.883106] e1000e 0000:01:00.0 enx0cc47a0a48f6: renamed from eth0 [ 2.883623] e1000e 0000:02:00.0 enx0cc47a0a48f7: renamed from eth1 [ 3.073980] random: crng init done [ 3.695164] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.700348] EXT4-fs (dm-0): mounted filesystem 572a5da5-b2a7-4b82-b52c-5cc46a28b8f8 ro with ordered data mode. Quota mode: none. [ 7.779970] EXT4-fs (dm-0): re-mounted 572a5da5-b2a7-4b82-b52c-5cc46a28b8f8 r/w. Quota mode: none. [ 9.283433] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.310698] EXT4-fs (sda1): mounted filesystem 4a68e2ab-a552-4d92-8f9e-52afbd7633f7 r/w with ordered data mode. Quota mode: none. [ 9.386504] Adding 1949692k swap on /dev/mapper/rimava1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 10.944240] xenbr0: port 1(enx0cc47a0a48f6) entered blocking state [ 10.944380] xenbr0: port 1(enx0cc47a0a48f6) entered disabled state [ 10.944509] e1000e 0000:01:00.0 enx0cc47a0a48f6: entered allmulticast mode [ 10.944666] e1000e 0000:01:00.0 enx0cc47a0a48f6: entered promiscuous mode [ 13.986967] e1000e 0000:01:00.0 enx0cc47a0a48f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 13.987397] xenbr0: port 1(enx0cc47a0a48f6) entered blocking state [ 13.987521] xenbr0: port 1(enx0cc47a0a48f6) entered forwarding state