[ 0.000000] Linux version 6.11.0+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Sun Sep 22 18:12:53 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/godello0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] Xen: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020060fff] usable [ 0.000000] Xen: [mem 0x000000009573f000-0x0000000095bbefff] reserved [ 0.000000] Xen: [mem 0x0000000095bbf000-0x0000000095fbefff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000095fbf000-0x0000000095ffefff] ACPI data [ 0.000000] Xen: [mem 0x0000000096000000-0x000000009fffffff] reserved [ 0.000000] Xen: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] Xen: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed90fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. PowerEdge R220/081N4V, BIOS 1.1.4 05/06/2014 [ 0.000000] DMI: Memory slots populated: 1/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000022] Xen PV: Detected 4 vCPUS [ 0.000490] tsc: Detected 3092.838 MHz processor [ 0.000814] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000818] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000824] last_pfn = 0x95fff max_arch_pfn = 0x400000000 [ 0.000828] MTRR map: 4 entries (0 fixed + 4 variable; max 20), built from 10 variable MTRRs [ 0.000830] MTRRs set to read-only [ 0.000834] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000889] Kernel/User page tables isolation: disabled on XEN PV. [ 0.020157] RAMDISK: [mem 0x04000000-0x0545ffff] [ 0.020170] ACPI: Early table checksum verification disabled [ 0.021765] ACPI: RSDP 0x00000000000FE020 000024 (v02 DELL ) [ 0.021778] ACPI: XSDT 0x0000000095FCF188 0000E4 (v01 DELL PE_SC3 00000001 01000013) [ 0.021841] ACPI: FACP 0x0000000095FF7000 00010C (v05 DELL PE_SC3 00000001 DELL 00040000) [ 0.021925] ACPI: DSDT 0x0000000095FDF000 012335 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.021939] ACPI: FACS 0x0000000095FBD000 000040 [ 0.021953] ACPI: UEFI 0x0000000095FFD000 000236 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.021966] ACPI: UEFI 0x0000000095FFC000 000042 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.021980] ACPI: ASF! 0x0000000095FFB000 0000A5 (v32 DELL PE_SC3 00000001 DELL 00040000) [ 0.021993] ACPI: ASPT 0x0000000095FFA000 000034 (v07 DELL PE_SC3 00000001 DELL 00040000) [ 0.022007] ACPI: BOOT 0x0000000095FF9000 000028 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.022020] ACPI: DBGP 0x0000000095FF8000 000034 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.022033] ACPI: HPET 0x0000000095FF6000 000038 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.022047] ACPI: APIC 0x0000000095FF5000 000092 (v03 DELL PE_SC3 00000001 DELL 00040000) [ 0.022060] ACPI: MCFG 0x0000000095FF4000 00003C (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.022074] ACPI: SLIC 0x0000000095FF3000 000176 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.022087] ACPI: SSDT 0x0000000095FDC000 002028 (v01 DELL PE_SC3 00001000 DELL 00040000) [ 0.022099] ACPI: SPMI 0x0000000095FDA000 000040 (v05 DELL PE_SC3 00000001 DELL 00040000) [ 0.022110] ACPI: SSDT 0x0000000095FD9000 000533 (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.022122] ACPI: SSDT 0x0000000095FD8000 000ACE (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.022134] ACPI: SSDT 0x0000000095FD4000 003492 (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.022147] ACPI: SPCR 0x0000000095FF2000 000050 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.022160] ACPI: RMAD 0x0000000095FD3000 000080 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.022173] ACPI: SSDT 0x0000000095FD2000 000514 (v01 DELL PE_SC3 00001000 DELL 00040000) [ 0.022186] ACPI: FPDT 0x0000000095FD1000 000044 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.022200] ACPI: HEST 0x0000000095FD0000 0000A8 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.022213] ACPI: ERST 0x0000000095FCE000 000230 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.022227] ACPI: BERT 0x0000000095FCD000 000030 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.022240] ACPI: EINJ 0x0000000095FCC000 000150 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.022246] ACPI: Reserving FACP table memory at [mem 0x95ff7000-0x95ff710b] [ 0.022248] ACPI: Reserving DSDT table memory at [mem 0x95fdf000-0x95ff1334] [ 0.022249] ACPI: Reserving FACS table memory at [mem 0x95fbd000-0x95fbd03f] [ 0.022249] ACPI: Reserving UEFI table memory at [mem 0x95ffd000-0x95ffd235] [ 0.022250] ACPI: Reserving UEFI table memory at [mem 0x95ffc000-0x95ffc041] [ 0.022251] ACPI: Reserving ASF! table memory at [mem 0x95ffb000-0x95ffb0a4] [ 0.022252] ACPI: Reserving ASPT table memory at [mem 0x95ffa000-0x95ffa033] [ 0.022253] ACPI: Reserving BOOT table memory at [mem 0x95ff9000-0x95ff9027] [ 0.022254] ACPI: Reserving DBGP table memory at [mem 0x95ff8000-0x95ff8033] [ 0.022254] ACPI: Reserving HPET table memory at [mem 0x95ff6000-0x95ff6037] [ 0.022255] ACPI: Reserving APIC table memory at [mem 0x95ff5000-0x95ff5091] [ 0.022256] ACPI: Reserving MCFG table memory at [mem 0x95ff4000-0x95ff403b] [ 0.022256] ACPI: Reserving SLIC table memory at [mem 0x95ff3000-0x95ff3175] [ 0.022257] ACPI: Reserving SSDT table memory at [mem 0x95fdc000-0x95fde027] [ 0.022258] ACPI: Reserving SPMI table memory at [mem 0x95fda000-0x95fda03f] [ 0.022258] ACPI: Reserving SSDT table memory at [mem 0x95fd9000-0x95fd9532] [ 0.022259] ACPI: Reserving SSDT table memory at [mem 0x95fd8000-0x95fd8acd] [ 0.022260] ACPI: Reserving SSDT table memory at [mem 0x95fd4000-0x95fd7491] [ 0.022261] ACPI: Reserving SPCR table memory at [mem 0x95ff2000-0x95ff204f] [ 0.022261] ACPI: Reserving RMAD table memory at [mem 0x95fd3000-0x95fd307f] [ 0.022262] ACPI: Reserving SSDT table memory at [mem 0x95fd2000-0x95fd2513] [ 0.022263] ACPI: Reserving FPDT table memory at [mem 0x95fd1000-0x95fd1043] [ 0.022263] ACPI: Reserving HEST table memory at [mem 0x95fd0000-0x95fd00a7] [ 0.022264] ACPI: Reserving ERST table memory at [mem 0x95fce000-0x95fce22f] [ 0.022265] ACPI: Reserving BERT table memory at [mem 0x95fcd000-0x95fcd02f] [ 0.022265] ACPI: Reserving EINJ table memory at [mem 0x95fcc000-0x95fcc14f] [ 0.022396] APIC: Switched APIC routing to: Xen PV [ 0.025481] Zone ranges: [ 0.025484] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.025486] DMA32 [mem 0x0000000001000000-0x0000000095ffefff] [ 0.025487] Normal empty [ 0.025488] Movable zone start for each node [ 0.025489] Early memory node ranges [ 0.025489] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.025492] node 0: [mem 0x0000000000100000-0x0000000020060fff] [ 0.025494] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020060fff] [ 0.025503] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.025583] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.028894] On node 0, zone DMA32: 32671 pages in unavailable ranges [ 0.028898] p2m virtual area at (____ptrval____), size is 40000000 [ 0.120942] Remapped 97 page(s) [ 0.120948] Remapped 0 non-RAM page(s) [ 0.121459] ACPI: PM-Timer IO Port: 0x1808 [ 0.121526] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.121562] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.121575] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.121579] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.121603] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.121607] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.121615] ACPI: SPCR: SPCR table version 1 [ 0.121618] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.121621] CPU topo: 8 possible CPUs exceed the limit of 4 [ 0.121630] CPU topo: Max. logical packages: 1 [ 0.121631] CPU topo: Max. logical dies: 1 [ 0.121631] CPU topo: Max. dies per package: 1 [ 0.121638] CPU topo: Max. threads per core: 1 [ 0.121638] CPU topo: Num. cores per package: 4 [ 0.121639] CPU topo: Num. threads per package: 4 [ 0.121639] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.121655] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.121657] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.121658] PM: hibernation: Registered nosave memory: [mem 0x20061000-0x9573efff] [ 0.121659] PM: hibernation: Registered nosave memory: [mem 0x9573f000-0x95bbefff] [ 0.121659] PM: hibernation: Registered nosave memory: [mem 0x95bbf000-0x95fbefff] [ 0.121660] PM: hibernation: Registered nosave memory: [mem 0x95fbf000-0x95ffefff] [ 0.121662] [mem 0x20061000-0x9573efff] available for PCI devices [ 0.121668] Booting kernel on Xen [ 0.121669] Xen version: 4.20-unstable (preserve-AD) [ 0.121673] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.127708] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.128454] percpu: Embedded 57 pages/cpu s194520 r8192 d30760 u524288 [ 0.128460] pcpu-alloc: s194520 r8192 d30760 u524288 alloc=1*2097152 [ 0.128463] pcpu-alloc: [0] 0 1 2 3 [ 0.128535] xen: PV spinlocks enabled [ 0.128538] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.128541] Kernel command line: placeholder root=/dev/mapper/godello0--vg-root ro console=hvc0 [ 0.128592] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.128614] random: crng init done [ 0.128773] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.128852] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.129393] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.129395] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.129398] software IO TLB: area num 4. [ 0.213706] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.216175] Dynamic Preempt: voluntary [ 0.216303] rcu: Preemptible hierarchical RCU implementation. [ 0.216304] rcu: RCU event tracing is enabled. [ 0.216305] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.216307] Trampoline variant of Tasks RCU enabled. [ 0.216308] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.216309] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.216330] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.225121] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.225269] xen:events: Using FIFO-based ABI [ 0.225297] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.225303] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.225309] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.225314] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.225319] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.225329] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.225334] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.225340] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.225345] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.225350] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.225356] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.225361] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.225367] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.225372] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.225377] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.225388] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.234595] Console: colour VGA+ 80x25 [ 0.234601] printk: legacy console [tty0] enabled [ 0.256041] printk: legacy console [hvc0] enabled [ 0.257218] ACPI: Core revision 20240827 [ 0.276698] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.278827] Xen: using vcpuop timer interface [ 0.278839] installing Xen timer for CPU 0 [ 0.279040] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c94d9afcf4, max_idle_ns: 440795231738 ns [ 0.279230] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.67 BogoMIPS (lpj=3092838) [ 0.279569] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.279714] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.279861] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.280242] Spectre V2 : Mitigation: Retpolines [ 0.280381] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.280557] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.280702] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.280844] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.281021] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.281203] MDS: Mitigation: Clear CPU buffers [ 0.281233] MMIO Stale Data: Unknown: No mitigations [ 0.281373] SRBDS: Unknown: Dependent on hypervisor status [ 0.281534] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.281708] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.281845] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.281989] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.282128] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.304991] Freeing SMP alternatives memory: 40K [ 0.305162] pid_max: default: 32768 minimum: 301 [ 0.305263] LSM: initializing lsm=capability,selinux [ 0.305429] SELinux: Initializing. [ 0.305721] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.305895] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.307318] cpu 0 spinlock event irq 25 [ 0.307463] VPMU disabled by hypervisor. [ 0.308060] Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only. [ 0.308235] signal: max sigframe size: 1776 [ 0.308438] rcu: Hierarchical SRCU implementation. [ 0.308578] rcu: Max phase no-delay instances is 400. [ 0.308819] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.310250] smp: Bringing up secondary CPUs ... [ 0.311293] installing Xen timer for CPU 1 [ 0.311750] installing Xen timer for CPU 2 [ 0.312135] installing Xen timer for CPU 3 [ 0.054836] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0002 [ 0.312324] cpu 1 spinlock event irq 45 [ 0.054836] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0004 [ 0.312591] cpu 2 spinlock event irq 46 [ 0.054836] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0006 [ 0.313283] cpu 3 spinlock event irq 47 [ 0.314282] smp: Brought up 1 node, 4 CPUs [ 0.314470] Memory: 382012K/524284K available (16384K kernel code, 2784K rwdata, 6296K rodata, 2704K init, 1736K bss, 138220K reserved, 0K cma-reserved) [ 0.314797] devtmpfs: initialized [ 0.314797] x86/mm: Memory block size: 128MB [ 0.315532] ACPI: PM: Registering ACPI NVS region [mem 0x95bbf000-0x95fbefff] (4194304 bytes) [ 0.315532] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.315708] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.316317] PM: RTC time: 18:46:03, date: 2024-09-22 [ 0.316580] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.316753] xen:grant_table: Grant tables using version 1 layout [ 0.316911] Grant table initialized [ 0.317172] audit: initializing netlink subsys (disabled) [ 0.317284] audit: type=2000 audit(1727030764.770:1): state=initialized audit_enabled=0 res=1 [ 0.317328] thermal_sys: Registered thermal governor 'step_wise' [ 0.317328] thermal_sys: Registered thermal governor 'user_space' [ 0.317471] Simple Boot Flag at 0x44 set to 0x1 [ 0.317773] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.318380] PCI: ECAM [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) for domain 0000 [bus 00-7f] [ 0.318563] PCI: ECAM [mem 0xf0000000-0xf7ffffff] reserved as E820 entry [ 0.366111] PCI: Using configuration type 1 for base access [ 0.366295] PCI: Dell System detected, enabling pci=bfsort. [ 0.366566] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.366566] ACPI: Added _OSI(Module Device) [ 0.367236] ACPI: Added _OSI(Processor Device) [ 0.367373] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.367512] ACPI: Added _OSI(Processor Aggregator Device) [ 0.377844] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.378617] xen: registering gsi 9 triggering 0 polarity 0 [ 0.378651] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.382566] ACPI: Dynamic OEM Table Load: [ 0.382713] ACPI: SSDT 0xFFFF88800399E000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120816) [ 0.383580] ACPI: Dynamic OEM Table Load: [ 0.383725] ACPI: SSDT 0xFFFF888003ADC800 0005AA (v01 PmRef ApIst 00003000 INTL 20120816) [ 0.384523] ACPI: Dynamic OEM Table Load: [ 0.384662] ACPI: SSDT 0xFFFF888003983200 000119 (v01 PmRef ApCst 00003000 INTL 20120816) [ 0.385871] ACPI: Interpreter enabled [ 0.386027] ACPI: PM: (supports S0 S4 S5) [ 0.386164] ACPI: Using IOAPIC for interrupt routing [ 0.386256] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.386434] PCI: Using E820 reservations for host bridge windows [ 0.386822] ACPI: Enabled 11 GPEs in block 00 to 3F [ 0.394518] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1) [ 0.402458] ACPI: \_TZ_.FN00: New power resource [ 0.402638] ACPI: \_TZ_.FN01: New power resource [ 0.402811] ACPI: \_TZ_.FN02: New power resource [ 0.402985] ACPI: \_TZ_.FN03: New power resource [ 0.403158] ACPI: \_TZ_.FN04: New power resource [ 0.403939] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) [ 0.404088] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.405038] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability LTR] [ 0.405188] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.405702] PCI host bridge to bus 0000:00 [ 0.405843] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.405989] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.406134] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.406231] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff window] [ 0.406407] pci_bus 0000:00: root bus resource [bus 00-7e] [ 0.406595] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000 conventional PCI endpoint [ 0.407182] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 conventional PCI endpoint [ 0.407307] pci 0000:00:14.0: BAR 0 [mem 0xa2b00000-0xa2b0ffff 64bit] [ 0.407720] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.408096] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 conventional PCI endpoint [ 0.408293] pci 0000:00:1a.0: BAR 0 [mem 0xa2b12000-0xa2b123ff] [ 0.408750] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.409068] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 PCIe Root Port [ 0.409356] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.409549] pci 0000:00:1c.0: bridge window [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.409944] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.410454] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 PCIe Root Port [ 0.410747] pci 0000:00:1c.2: PCI bridge to [bus 02-06] [ 0.410913] pci 0000:00:1c.2: bridge window [mem 0xa2000000-0xa29fffff] [ 0.411095] pci 0000:00:1c.2: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.411456] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.411984] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 conventional PCI endpoint [ 0.412216] pci 0000:00:1d.0: BAR 0 [mem 0xa2b11000-0xa2b113ff] [ 0.412543] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.412864] pci 0000:00:1f.0: [8086:8c52] type 00 class 0x060100 conventional PCI endpoint [ 0.413546] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 conventional PCI endpoint [ 0.413779] pci 0000:00:1f.2: BAR 0 [io 0x3048-0x304f] [ 0.413948] pci 0000:00:1f.2: BAR 1 [io 0x3054-0x3057] [ 0.414115] pci 0000:00:1f.2: BAR 2 [io 0x3040-0x3047] [ 0.414265] pci 0000:00:1f.2: BAR 3 [io 0x3050-0x3053] [ 0.414429] pci 0000:00:1f.2: BAR 4 [io 0x3020-0x303f] [ 0.414594] pci 0000:00:1f.2: BAR 5 [mem 0xa2b10000-0xa2b107ff] [ 0.414903] pci 0000:00:1f.2: PME# supported from D3hot [ 0.415189] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 conventional PCI endpoint [ 0.415302] pci 0000:00:1f.3: BAR 0 [mem 0xa2b13000-0xa2b130ff 64bit] [ 0.415535] pci 0000:00:1f.3: BAR 4 [io 0x3000-0x301f] [ 0.416114] pci 0000:01:00.0: [14e4:165f] type 00 class 0x020000 PCIe Endpoint [ 0.416394] pci 0000:01:00.0: BAR 0 [mem 0xa2a30000-0xa2a3ffff 64bit pref] [ 0.416663] pci 0000:01:00.0: BAR 2 [mem 0xa2a40000-0xa2a4ffff 64bit pref] [ 0.416927] pci 0000:01:00.0: BAR 4 [mem 0xa2a50000-0xa2a5ffff 64bit pref] [ 0.417164] pci 0000:01:00.0: ROM [mem 0x00000000-0x0003ffff pref] [ 0.417654] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.418385] pci 0000:01:00.1: [14e4:165f] type 00 class 0x020000 PCIe Endpoint [ 0.419389] pci 0000:01:00.1: BAR 0 [mem 0xa2a00000-0xa2a0ffff 64bit pref] [ 0.419647] pci 0000:01:00.1: BAR 2 [mem 0xa2a10000-0xa2a1ffff 64bit pref] [ 0.419910] pci 0000:01:00.1: BAR 4 [mem 0xa2a20000-0xa2a2ffff 64bit pref] [ 0.420148] pci 0000:01:00.1: ROM [mem 0x00000000-0x0003ffff pref] [ 0.420699] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold [ 0.421484] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.422231] pci 0000:02:00.0: [1912:0013] type 01 class 0x060400 PCIe Switch Upstream Port [ 0.423525] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 0.423895] pci 0000:02:00.0: bridge window [mem 0xa2000000-0xa29fffff] [ 0.424334] pci 0000:02:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.426231] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.427812] pci 0000:00:1c.2: PCI bridge to [bus 02-06] [ 0.429265] pci 0000:03:00.0: [1912:0013] type 01 class 0x060400 PCIe Switch Downstream Port [ 0.430653] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 0.431064] pci 0000:03:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.431548] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.433638] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.435568] pci 0000:03:01.0: [1912:0013] type 01 class 0x060400 PCIe Switch Downstream Port [ 0.436987] pci 0000:03:01.0: PCI bridge to [bus 06] [ 0.437383] pci 0000:03:01.0: bridge window [mem 0xa2900000-0xa29fffff] [ 0.440036] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold [ 0.443722] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 0.445528] pci 0000:04:00.0: [1912:0012] type 01 class 0x060400 PCIe to PCI/PCI-X bridge [ 0.446912] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.447302] pci 0000:04:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.447798] pci 0000:04:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.451232] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 0.452812] pci_bus 0000:05: extended config space not accessible [ 0.453189] pci 0000:05:00.0: [102b:0534] type 00 class 0x030000 conventional PCI endpoint [ 0.453717] pci 0000:05:00.0: BAR 0 [mem 0xa1000000-0xa1ffffff pref] [ 0.454139] pci 0000:05:00.0: BAR 1 [mem 0xa2800000-0xa2803fff] [ 0.454495] pci 0000:05:00.0: BAR 2 [mem 0xa2000000-0xa27fffff] [ 0.455977] pci 0000:05:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.459231] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.461493] pci 0000:06:00.0: [1912:0011] type 00 class 0x050000 conventional PCI endpoint [ 0.462157] pci 0000:06:00.0: BAR 0 [mem 0xa2901000-0xa2901fff] [ 0.462501] pci 0000:06:00.0: BAR 1 [mem 0xa2900000-0xa290007f] [ 0.464947] pci 0000:06:00.0: PME# supported from D3hot [ 0.466096] pci 0000:03:01.0: PCI bridge to [bus 06] [ 0.467778] pci_bus 0000:00: on NUMA node 0 [ 0.467976] xen: registering gsi 13 triggering 1 polarity 0 [ 0.468955] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.469168] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.469300] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.469513] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.469727] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.469868] ACPI: PCI: Interrupt link LNKE disabled [ 0.470072] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.470216] ACPI: PCI: Interrupt link LNKF disabled [ 0.470303] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.470446] ACPI: PCI: Interrupt link LNKG disabled [ 0.470644] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.471315] xen:balloon: Initialising balloon driver [ 0.471471] iommu: Default domain type: Translated [ 0.471471] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.471621] SCSI subsystem initialized [ 0.471768] libata version 3.00 loaded. [ 0.471768] ACPI: bus type USB registered [ 0.472243] usbcore: registered new interface driver usbfs [ 0.472392] usbcore: registered new interface driver hub [ 0.472536] usbcore: registered new device driver usb [ 0.472686] pps_core: LinuxPPS API ver. 1 registered [ 0.472826] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.473004] PTP clock support registered [ 0.473258] Advanced Linux Sound Architecture Driver Initialized. [ 0.473561] NetLabel: Initializing [ 0.473698] NetLabel: domain hash size = 128 [ 0.473832] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.473984] NetLabel: unlabeled traffic allowed by default [ 0.474240] PCI: Using ACPI for IRQ routing [ 0.491080] PCI: pci_cache_line_size set to 64 bytes [ 0.491717] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.491719] e820: reserve RAM buffer [mem 0x20061000-0x23ffffff] [ 0.491756] pci 0000:05:00.0: vgaarb: setting as boot VGA device [ 0.491756] pci 0000:05:00.0: vgaarb: bridge control possible [ 0.491756] pci 0000:05:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.492231] vgaarb: loaded [ 0.492443] clocksource: Switched to clocksource tsc-early [ 0.492647] VFS: Disk quotas dquot_6.6.0 [ 0.492789] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.492955] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.493154] pnp: PnP ACPI init [ 0.493207] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.493352] system 00:00: [io 0xffff] has been reserved [ 0.493492] system 00:00: [io 0xffff] has been reserved [ 0.493633] system 00:00: [io 0xffff] has been reserved [ 0.493774] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.493914] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.494091] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.494272] xen: registering gsi 8 triggering 1 polarity 0 [ 0.494323] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.494748] xen: registering gsi 3 triggering 1 polarity 0 [ 0.494988] xen: registering gsi 4 triggering 1 polarity 0 [ 0.494991] Already setup the GSI :4 [ 0.495303] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.495452] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.495596] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.495740] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.495887] system 00:06: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.496033] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.496177] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.496329] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved [ 0.496476] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.496621] system 00:06: [mem 0xa0000000-0xa0000fff] has been reserved [ 0.496764] system 00:06: [mem 0xa0020000-0xa002ffff] has been reserved [ 0.497708] pnp: PnP ACPI: found 7 devices [ 0.519632] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.519797] NET: Registered PF_INET protocol family [ 0.519967] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.520302] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.520479] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.520654] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.520857] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.521053] TCP: Hash tables configured (established 4096 bind 4096) [ 0.521211] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.521381] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.521567] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.521889] RPC: Registered named UNIX socket transport module. [ 0.522034] RPC: Registered udp transport module. [ 0.522172] RPC: Registered tcp transport module. [ 0.522320] RPC: Registered tcp-with-tls transport module. [ 0.522459] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.522899] pci 0000:00:1c.0: bridge window [mem 0xa0100000-0xa01fffff]: assigned [ 0.523076] pci 0000:01:00.0: ROM [mem 0xa0100000-0xa013ffff pref]: assigned [ 0.523223] pci 0000:01:00.1: ROM [mem 0xa0140000-0xa017ffff pref]: assigned [ 0.523378] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.523530] pci 0000:00:1c.0: bridge window [mem 0xa0100000-0xa01fffff] [ 0.523679] pci 0000:00:1c.0: bridge window [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.523869] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.524154] pci 0000:04:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.524405] pci 0000:04:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.524774] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 0.525056] pci 0000:03:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.525312] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.525707] pci 0000:03:01.0: PCI bridge to [bus 06] [ 0.525988] pci 0000:03:01.0: bridge window [mem 0xa2900000-0xa29fffff] [ 0.526501] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 0.526771] pci 0000:02:00.0: bridge window [mem 0xa2000000-0xa29fffff] [ 0.527012] pci 0000:02:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.527445] pci 0000:00:1c.2: PCI bridge to [bus 02-06] [ 0.527597] pci 0000:00:1c.2: bridge window [mem 0xa2000000-0xa29fffff] [ 0.527749] pci 0000:00:1c.2: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.527933] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.528077] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.528219] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.528365] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff window] [ 0.528510] pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa01fffff] [ 0.528654] pci_bus 0000:01: resource 2 [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.528826] pci_bus 0000:02: resource 1 [mem 0xa2000000-0xa29fffff] [ 0.528969] pci_bus 0000:02: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.529141] pci_bus 0000:03: resource 1 [mem 0xa2000000-0xa29fffff] [ 0.529289] pci_bus 0000:03: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.529461] pci_bus 0000:04: resource 1 [mem 0xa2000000-0xa28fffff] [ 0.529604] pci_bus 0000:04: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.529776] pci_bus 0000:05: resource 1 [mem 0xa2000000-0xa28fffff] [ 0.529919] pci_bus 0000:05: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.530094] pci_bus 0000:06: resource 1 [mem 0xa2900000-0xa29fffff] [ 0.530366] xen: registering gsi 16 triggering 0 polarity 1 [ 0.530389] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.531820] xen: registering gsi 16 triggering 0 polarity 1 [ 0.531824] Already setup the GSI :16 [ 0.542355] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x7c0 took 10333 usecs [ 0.544539] xen: registering gsi 23 triggering 0 polarity 1 [ 0.544558] xen: --> pirq=23 -> irq=23 (gsi=23) [ 0.555355] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x7c0 took 10605 usecs [ 0.555843] PCI: CLS 64 bytes, default 64 [ 0.556007] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.556057] Unpacking initramfs... [ 0.556151] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.556540] kvm_intel: VMX not supported by CPU 0 [ 0.556682] kvm_amd: CPU 0 isn't AMD or Hygon [ 0.556823] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c94d9afcf4, max_idle_ns: 440795231738 ns [ 0.557043] clocksource: Switched to clocksource tsc [ 0.560216] Initialise system trusted keyrings [ 0.560443] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.560723] NFS: Registering the id_resolver key type [ 0.560879] Key type id_resolver registered [ 0.561017] Key type id_legacy registered [ 0.561199] 9p: Installing v9fs 9p2000 file system support [ 0.573675] Key type asymmetric registered [ 0.573824] Asymmetric key parser 'x509' registered [ 0.573989] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.574172] io scheduler mq-deadline registered [ 0.574311] io scheduler kyber registered [ 0.574914] xen: registering gsi 16 triggering 0 polarity 1 [ 0.574921] Already setup the GSI :16 [ 0.575274] pcieport 0000:00:1c.0: PME: Signaling with IRQ 50 [ 0.575636] xen: registering gsi 18 triggering 0 polarity 1 [ 0.575653] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.575826] pcieport 0000:00:1c.2: PME: Signaling with IRQ 51 [ 0.580203] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.580436] ACPI: button: Power Button [PWRF] [ 0.580995] Monitor-Mwait will be used to enter C-1 state [ 0.580998] Monitor-Mwait will be used to enter C-2 state [ 0.581920] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.582067] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.582422] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.582566] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.583018] xen:xen_evtchn: Event-channel device installed [ 0.583225] xen_pciback: backend is vpci [ 0.583800] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.584085] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.584799] hpet_acpi_add: no address or irqs in _CRS [ 0.585010] Non-volatile memory driver v1.3 [ 0.586297] loop: module loaded [ 0.589979] ahci 0000:00:1f.2: version 3.0 [ 0.590076] xen: registering gsi 19 triggering 0 polarity 1 [ 0.590098] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.590266] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.590449] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 6 Gbps, SATA mode [ 0.590625] ahci 0000:00:1f.2: 3/6 ports implemented (port mask 0x31) [ 0.590770] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 0.595337] scsi host0: ahci [ 0.595667] scsi host1: ahci [ 0.595966] scsi host2: ahci [ 0.596250] scsi host3: ahci [ 0.596518] scsi host4: ahci [ 0.596787] scsi host5: ahci [ 0.596966] ata1: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10100 irq 53 lpm-pol 4 [ 0.597141] ata2: DUMMY [ 0.597267] ata3: DUMMY [ 0.597397] ata4: DUMMY [ 0.597527] ata5: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10300 irq 53 lpm-pol 4 [ 0.597703] ata6: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10380 irq 53 lpm-pol 0 [ 0.598064] tun: Universal TUN/TAP device driver, 1.6 [ 0.598382] xen: registering gsi 16 triggering 0 polarity 1 [ 0.598389] Already setup the GSI :16 [ 0.626126] tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 54:9f:35:05:fd:58 [ 0.626321] tg3 0000:01:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 0.626502] tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 0.626675] tg3 0000:01:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 0.627281] xen: registering gsi 17 triggering 0 polarity 1 [ 0.627305] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.637961] Freeing initrd memory: 20864K [ 0.670322] tg3 0000:01:00.1 eth1: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 54:9f:35:05:fd:5a [ 0.670508] tg3 0000:01:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 0.670690] tg3 0000:01:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 0.670871] tg3 0000:01:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit] [ 0.671391] e100: Intel(R) PRO/100 Network Driver [ 0.671529] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.671678] sky2: driver version 1.30 [ 0.671836] xen_netfront: Initialising Xen virtual ethernet driver [ 0.672263] xen: registering gsi 16 triggering 0 polarity 1 [ 0.672270] Already setup the GSI :16 [ 0.672277] xen: registering gsi 16 triggering 0 polarity 1 [ 0.672360] xen: registering gsi 23 triggering 0 polarity 1 [ 0.672365] Already setup the GSI :23 [ 0.672425] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.672544] Already setup the GSI :16 [ 0.672640] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.673030] ehci-pci 0000:00:1d.0: debug port 2 [ 0.677165] ehci-pci 0000:00:1d.0: irq 23, io mem 0xa2b11000 [ 0.682900] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.683110] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 0.683279] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.683446] usb usb1: Product: EHCI Host Controller [ 0.683586] usb usb1: Manufacturer: Linux 6.11.0+ ehci_hcd [ 0.683729] usb usb1: SerialNumber: 0000:00:1d.0 [ 0.684057] hub 1-0:1.0: USB hub found [ 0.684205] hub 1-0:1.0: 2 ports detected [ 0.684530] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.684745] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 2 [ 0.684959] ehci-pci 0000:00:1a.0: debug port 2 [ 0.689085] ehci-pci 0000:00:1a.0: irq 16, io mem 0xa2b12000 [ 0.694947] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.695158] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 0.695330] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.695502] usb usb2: Product: EHCI Host Controller [ 0.695640] usb usb2: Manufacturer: Linux 6.11.0+ ehci_hcd [ 0.695779] usb usb2: SerialNumber: 0000:00:1a.0 [ 0.696104] hub 2-0:1.0: USB hub found [ 0.696254] hub 2-0:1.0: 2 ports detected [ 0.696585] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.696805] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.698076] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.698516] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.698730] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.698915] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.699130] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 0.699310] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.699483] usb usb3: Product: xHCI Host Controller [ 0.699622] usb usb3: Manufacturer: Linux 6.11.0+ xhci-hcd [ 0.699762] usb usb3: SerialNumber: 0000:00:14.0 [ 0.700056] hub 3-0:1.0: USB hub found [ 0.700214] hub 3-0:1.0: 10 ports detected [ 0.703462] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.11 [ 0.703640] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.703817] usb usb4: Product: xHCI Host Controller [ 0.703980] usb usb4: Manufacturer: Linux 6.11.0+ xhci-hcd [ 0.704119] usb usb4: SerialNumber: 0000:00:14.0 [ 0.704368] hub 4-0:1.0: USB hub found [ 0.704519] hub 4-0:1.0: 2 ports detected [ 0.705074] usbcore: registered new interface driver usblp [ 0.705225] usbcore: registered new interface driver usb-storage [ 0.705470] i8042: PNP: No PS/2 controller found. [ 0.705708] rtc_cmos 00:02: RTC can wake from S4 [ 0.706274] rtc_cmos 00:02: registered as rtc0 [ 0.706457] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram [ 0.706628] device-mapper: uevent: version 1.0.3 [ 0.706706] xen: registering gsi 18 triggering 0 polarity 1 [ 0.706771] Already setup the GSI :18 [ 0.706810] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.707009] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.707113] intel_pstate: CPU model not supported [ 0.707392] hid: raw HID events driver (C) Jiri Kosina [ 0.707625] usbcore: registered new interface driver usbhid [ 0.707765] usbhid: USB HID core driver [ 0.708223] Initializing XFRM netlink socket [ 0.708374] NET: Registered PF_INET6 protocol family [ 0.708853] Segment Routing with IPv6 [ 0.708994] In-situ OAM (IOAM) with IPv6 [ 0.709148] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.709379] NET: Registered PF_PACKET protocol family [ 0.709540] 9pnet: Installing 9P2000 support [ 0.709690] Key type dns_resolver registered [ 0.710910] IPI shorthand broadcast: enabled [ 0.712328] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.713154] sched_clock: Marking stable (659029713, 53836715)->(719712647, -6846219) [ 0.713619] registered taskstats version 1 [ 0.713759] Loading compiled-in X.509 certificates [ 0.714894] PM: Magic number: 8:817:797 [ 0.715096] printk: legacy console [netcon0] enabled [ 0.715238] netconsole: network logging started [ 0.715610] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.724201] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.726491] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.726677] ALSA device list: [ 0.726810] No soundcards found. [ 0.727331] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.909206] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.918949] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.934910] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.942888] usb 3-9: new high-speed USB device number 2 using xhci_hcd [ 0.958082] ata1.00: ATA-8: TOSHIBA MG03ACA100, FL1D, max UDMA/100 [ 0.958963] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.960462] ata1.00: configured for UDMA/100 [ 0.970856] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MG03ACA1 FL1D PQ: 0 ANSI: 5 [ 0.971377] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.971382] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.971701] sd 0:0:0:0: [sda] Write Protect is off [ 0.971853] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.971875] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.972088] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.044277] usb 1-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.044453] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.044950] hub 1-1:1.0: USB hub found [ 1.045269] hub 1-1:1.0: 6 ports detected [ 1.060267] usb 2-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.060436] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.060950] hub 2-1:1.0: USB hub found [ 1.061291] hub 2-1:1.0: 4 ports detected [ 1.066898] usb 3-9: New USB device found, idVendor=0624, idProduct=0248, bcdDevice= 0.00 [ 1.067073] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.067213] usb 3-9: Product: Gadget USB HUB [ 1.067345] usb 3-9: Manufacturer: no manufacturer [ 1.067473] usb 3-9: SerialNumber: 0123456789 [ 1.068374] hub 3-9:1.0: USB hub found [ 1.068602] hub 3-9:1.0: 6 ports detected [ 1.174113] sda: sda1 sda2 < sda5 > [ 1.174574] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.276898] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.279661] ata5.00: ATAPI: HL-DT-ST DVD+/-RW GTA0N, A3B0, max UDMA/100 [ 1.284405] ata5.00: configured for UDMA/100 [ 1.299176] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD+-RW GTA0N A3B0 PQ: 0 ANSI: 5 [ 1.322497] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.322680] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.331250] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.331375] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 1.358942] usb 3-9.1: new high-speed USB device number 3 using xhci_hcd [ 1.443136] usb 3-9.1: New USB device found, idVendor=0624, idProduct=0249, bcdDevice= 0.00 [ 1.443315] usb 3-9.1: New USB device strings: Mfr=4, Product=5, SerialNumber=6 [ 1.443483] usb 3-9.1: Product: Keyboard/Mouse Function [ 1.443623] usb 3-9.1: Manufacturer: Avocent [ 1.443760] usb 3-9.1: SerialNumber: 20120917 [ 1.450731] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/0003:0624:0249.0001/input/input1 [ 1.502419] hid-generic 0003:0624:0249.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input0 [ 1.503676] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/0003:0624:0249.0002/input/input2 [ 1.504015] hid-generic 0003:0624:0249.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input1 [ 1.505008] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.2/0003:0624:0249.0003/input/input3 [ 1.505285] hid-generic 0003:0624:0249.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input2 [ 1.637254] ata6: SATA link down (SStatus 0 SControl 300) [ 1.638676] Freeing unused kernel image (initmem) memory: 2704K [ 1.638849] Write protecting the kernel read-only data: 24576k [ 1.653919] Freeing unused kernel image (rodata/data gap) memory: 1896K [ 1.856975] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.857165] Run /init as init process [ 1.857306] with arguments: [ 1.857307] /init [ 1.857308] placeholder [ 1.857309] with environment: [ 1.857309] HOME=/ [ 1.857310] TERM=linux [ 2.083729] tg3 0000:01:00.0 enx549f3505fd58: renamed from eth0 [ 2.086292] tg3 0000:01:00.1 enx549f3505fd5a: renamed from eth1 [ 2.758277] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 2.762715] EXT4-fs (dm-0): mounted filesystem ed731bc5-67d1-4fe9-9c18-ab509c0eba13 ro with ordered data mode. Quota mode: none. [ 6.381320] EXT4-fs (dm-0): re-mounted ed731bc5-67d1-4fe9-9c18-ab509c0eba13 r/w. Quota mode: none. [ 7.505060] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 7.515222] EXT4-fs (sda1): mounted filesystem 9915965b-f741-4ef8-be4a-0e58511a7d6e r/w with ordered data mode. Quota mode: none. [ 7.581172] Adding 1949692k swap on /dev/mapper/godello0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 9.030271] xenbr0: port 1(enx549f3505fd58) entered blocking state [ 9.030487] xenbr0: port 1(enx549f3505fd58) entered disabled state [ 9.030638] tg3 0000:01:00.0 enx549f3505fd58: entered allmulticast mode [ 9.030818] tg3 0000:01:00.0 enx549f3505fd58: entered promiscuous mode [ 12.699053] tg3 0000:01:00.0 enx549f3505fd58: Link is up at 1000 Mbps, full duplex [ 12.699126] xenbr0: port 1(enx549f3505fd58) entered blocking state [ 12.699269] tg3 0000:01:00.0 enx549f3505fd58: Flow control is off for TX and off for RX [ 12.699276] xenbr0: port 1(enx549f3505fd58) entered forwarding state [ 12.699283] tg3 0000:01:00.0 enx549f3505fd58: EEE is disabled