[ 0.000000] Linux version 6.1.111+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Sun Sep 22 21:52:22 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000458] tsc: Detected 2199.996 MHz processor [ 0.000895] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000898] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000905] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000907] Disabled [ 0.000908] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000912] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000951] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027835] RAMDISK: [mem 0x04000000-0x05423fff] [ 0.027843] ACPI: Early table checksum verification disabled [ 0.028441] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028453] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028489] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028538] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028554] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028570] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028586] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028602] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028618] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028634] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028654] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028671] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028687] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028703] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028719] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028735] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028753] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028769] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028785] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028801] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028817] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028833] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028841] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028843] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028844] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028845] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028846] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028847] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028848] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028849] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028850] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028851] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028852] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028853] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028854] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028855] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028856] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028857] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028858] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028859] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028860] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028861] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028906] Setting APIC routing to Xen PV. [ 0.032838] Zone ranges: [ 0.032839] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032841] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032843] Normal empty [ 0.032844] Movable zone start for each node [ 0.032845] Early memory node ranges [ 0.032845] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032847] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032849] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032854] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032889] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034448] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034453] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221930] Remapped 102 page(s) [ 0.223302] ACPI: PM-Timer IO Port: 0x408 [ 0.223354] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223357] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223359] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223360] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223362] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223363] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223365] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223366] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223394] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223407] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223411] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223437] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223441] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223511] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223525] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223528] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223529] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223530] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223535] Booting kernel on Xen [ 0.223536] Xen version: 4.20-unstable (preserve-AD) [ 0.223539] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229771] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.230055] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.230061] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.230065] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230142] xen: PV spinlocks enabled [ 0.230145] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230151] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230153] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230190] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230200] random: crng init done [ 0.230248] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230274] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231589] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231591] software IO TLB: area num 8. [ 0.291002] Memory: 389292K/524284K available (14349K kernel code, 2686K rwdata, 4584K rodata, 1580K init, 1288K bss, 134740K reserved, 0K cma-reserved) [ 0.291169] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.293652] Dynamic Preempt: voluntary [ 0.293751] rcu: Preemptible hierarchical RCU implementation. [ 0.293752] rcu: RCU event tracing is enabled. [ 0.293753] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.293755] Trampoline variant of Tasks RCU enabled. [ 0.293756] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.293757] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.304256] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.304381] xen:events: Using FIFO-based ABI [ 0.304405] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.304413] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.304421] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.304428] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.304436] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.304443] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.304451] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.304458] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.304465] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.304473] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.304480] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.304488] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.304495] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.304504] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.304512] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.304523] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.309866] Console: colour VGA+ 80x25 [ 0.324504] printk: console [tty0] enabled [ 0.325826] printk: console [hvc0] enabled [ 0.325964] ACPI: Core revision 20220331 [ 0.341481] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.341644] Xen: using vcpuop timer interface [ 0.341652] installing Xen timer for CPU 0 [ 0.341801] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.341958] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199996) [ 0.342285] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.342401] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.342527] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.342675] Spectre V2 : Mitigation: Retpolines [ 0.342965] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.343110] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.343229] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.343349] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.343495] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.343613] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.343763] MDS: Mitigation: Clear CPU buffers [ 0.343875] TAA: Mitigation: Clear CPU buffers [ 0.343962] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.344128] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.344271] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.344395] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.344514] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.344632] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.362295] Freeing SMP alternatives memory: 40K [ 0.362422] pid_max: default: 32768 minimum: 301 [ 0.362981] LSM: Security Framework initializing [ 0.363102] SELinux: Initializing. [ 0.363241] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363388] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364051] cpu 0 spinlock event irq 25 [ 0.364170] VPMU disabled by hypervisor. [ 0.364605] cblist_init_generic: Setting adjustable number of callback queues. [ 0.364750] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.364905] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.364964] signal: max sigframe size: 1776 [ 0.365126] rcu: Hierarchical SRCU implementation. [ 0.365256] rcu: Max phase no-delay instances is 400. [ 0.365743] smp: Bringing up secondary CPUs ... [ 0.366077] installing Xen timer for CPU 1 [ 0.366545] cpu 1 spinlock event irq 35 [ 0.367099] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.367266] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.367452] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.368183] installing Xen timer for CPU 2 [ 0.368649] cpu 2 spinlock event irq 41 [ 0.369027] installing Xen timer for CPU 3 [ 0.369483] cpu 3 spinlock event irq 47 [ 0.369483] installing Xen timer for CPU 4 [ 0.370297] cpu 4 spinlock event irq 53 [ 0.370297] installing Xen timer for CPU 5 [ 0.371134] cpu 5 spinlock event irq 59 [ 0.371165] installing Xen timer for CPU 6 [ 0.372016] cpu 6 spinlock event irq 65 [ 0.372218] installing Xen timer for CPU 7 [ 0.372670] cpu 7 spinlock event irq 71 [ 0.373222] smp: Brought up 1 node, 8 CPUs [ 0.373339] smpboot: Max logical packages: 1 [ 0.373557] devtmpfs: initialized [ 0.373557] x86/mm: Memory block size: 128MB [ 0.374297] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.374297] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.374396] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.375057] PM: RTC time: 22:09:18, date: 2024-09-22 [ 0.375316] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.375462] xen:grant_table: Grant tables using version 1 layout [ 0.375598] Grant table initialized [ 0.375899] audit: initializing netlink subsys (disabled) [ 0.376008] audit: type=2000 audit(1727042958.404:1): state=initialized audit_enabled=0 res=1 [ 0.376032] thermal_sys: Registered thermal governor 'step_wise' [ 0.376032] thermal_sys: Registered thermal governor 'user_space' [ 0.376157] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.376580] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.376970] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.503453] PCI: Using configuration type 1 for base access [ 0.506085] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.507005] ACPI: Added _OSI(Module Device) [ 0.507122] ACPI: Added _OSI(Processor Device) [ 0.507235] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.507348] ACPI: Added _OSI(Processor Aggregator Device) [ 0.537205] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.539186] xen: registering gsi 9 triggering 0 polarity 0 [ 0.541743] ACPI: Dynamic OEM Table Load: [ 0.549572] ACPI: Interpreter enabled [ 0.549705] ACPI: PM: (supports S0 S4 S5) [ 0.549816] ACPI: Using IOAPIC for interrupt routing [ 0.549965] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.550114] PCI: Using E820 reservations for host bridge windows [ 0.550691] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.583642] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.583771] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.584011] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.584275] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.584398] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.584573] PCI host bridge to bus 0000:ff [ 0.584690] pci_bus 0000:ff: root bus resource [bus ff] [ 0.584892] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.585290] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.585715] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.586139] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.586577] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.587002] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.587424] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.587846] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.588292] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.588726] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.589158] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.589581] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.590011] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.590437] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.590871] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.591264] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.591686] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.592113] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.592366] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.592824] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.593305] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.593769] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.594242] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.594710] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.595177] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.595655] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.596078] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.596509] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.596975] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.597460] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.597924] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.598325] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.598748] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.599174] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.599596] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.600039] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.600505] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.600970] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.601443] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.601957] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.602384] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.602813] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.603244] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.603492] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.603928] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.604271] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.604696] pci_bus 0000:ff: on NUMA node 0 [ 0.608986] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.609112] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.609393] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.609732] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.609851] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.610294] PCI host bridge to bus 0000:00 [ 0.610408] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.610529] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.610657] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.610800] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.610944] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.611025] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.611660] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.612183] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.612552] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.613071] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.613459] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.613980] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.614333] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.614848] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.615217] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.615741] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.616109] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.616628] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.616998] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.617574] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.618202] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.618877] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.619060] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.619520] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.619862] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.621064] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.621526] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.621828] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.622047] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.622512] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.622868] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.623039] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.623573] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.623890] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.624388] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.624591] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.624712] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.632131] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.632685] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.632879] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.632970] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.633259] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.633811] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.634008] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.634130] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.634415] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.634967] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.635161] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.635281] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.635602] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.635807] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.636342] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.636662] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.637419] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.637612] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.637769] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.637926] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.638003] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.638160] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.638317] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.638665] pci 0000:00:1f.2: PME# supported from D3hot [ 0.638963] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.639181] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.639424] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.639810] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.640027] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.640739] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.641032] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.641371] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.641583] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.642335] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.642553] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.643260] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.643472] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.644185] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.644397] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.645092] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.645230] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.645571] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.645783] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.646069] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.646252] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.646601] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.646822] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.646943] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.647149] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.647269] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.647839] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.648055] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.648339] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.648522] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.648869] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.649044] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.649165] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.649371] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.649491] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.650043] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.650177] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.650314] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.650603] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.650901] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.651209] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.651328] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.651534] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.651749] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.651914] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.652372] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.652832] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.652961] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.653089] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.653443] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.653562] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.653772] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.653990] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.654154] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.654684] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.655163] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.655288] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.655416] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.655753] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.656148] pci 0000:09:00.0: enabling Extended Tags [ 0.656488] pci 0000:09:00.0: supports D1 D2 [ 0.656600] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.656956] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.657085] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.657213] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.657516] pci_bus 0000:0a: extended config space not accessible [ 0.657686] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.657892] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.658009] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.658176] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.658528] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.658818] pci 0000:0a:00.0: supports D1 D2 [ 0.658931] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.659277] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.659414] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.659543] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.659929] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.660045] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.660254] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.660414] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.660928] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.661076] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.661220] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.661443] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.661586] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.662147] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.662348] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.662556] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.662724] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.663237] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.663465] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.663616] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.663833] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.663961] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.664488] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.664688] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.664896] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.665007] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.665519] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.665747] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.665890] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.666025] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.666168] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.666714] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.666914] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.667051] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.667212] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.667721] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.667954] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.668093] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.668310] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.668453] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.669030] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.669156] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.669284] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.669449] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.669917] pci_bus 0000:00: on NUMA node 0 [ 0.670017] xen: registering gsi 13 triggering 1 polarity 0 [ 0.670982] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.671177] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.671365] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.671554] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.671742] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.671859] ACPI: PCI: Interrupt link LNKE disabled [ 0.672033] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.672171] ACPI: PCI: Interrupt link LNKF disabled [ 0.672353] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.672471] ACPI: PCI: Interrupt link LNKG disabled [ 0.672654] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.672771] ACPI: PCI: Interrupt link LNKH disabled [ 0.673040] xen:balloon: Initialising balloon driver [ 0.673178] iommu: Default domain type: Translated [ 0.680964] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.681147] SCSI subsystem initialized [ 0.681274] libata version 3.00 loaded. [ 0.681274] ACPI: bus type USB registered [ 0.681274] usbcore: registered new interface driver usbfs [ 0.681274] usbcore: registered new interface driver hub [ 0.681375] usbcore: registered new device driver usb [ 0.681501] pps_core: LinuxPPS API ver. 1 registered [ 0.681962] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.682113] PTP clock support registered [ 0.682247] Advanced Linux Sound Architecture Driver Initialized. [ 0.682256] NetLabel: Initializing [ 0.682367] NetLabel: domain hash size = 128 [ 0.682479] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.682977] NetLabel: unlabeled traffic allowed by default [ 0.683115] PCI: Using ACPI for IRQ routing [ 0.718475] PCI: pci_cache_line_size set to 64 bytes [ 0.719252] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.719256] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.719286] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.719286] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.719286] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.719389] vgaarb: loaded [ 0.722051] clocksource: Switched to clocksource tsc-early [ 0.722241] VFS: Disk quotas dquot_6.6.0 [ 0.722365] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.722507] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.722662] pnp: PnP ACPI init [ 0.723147] xen: registering gsi 8 triggering 1 polarity 0 [ 0.723345] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.723502] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.723620] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.723738] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.723855] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.723984] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.724117] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.724239] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.724358] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.724477] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.724596] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.724715] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.724841] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.725275] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.725398] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.725515] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.725632] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.725750] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.726198] xen: registering gsi 4 triggering 1 polarity 0 [ 0.726203] Already setup the GSI :4 [ 0.726316] pnp 00:03: [dma 0 disabled] [ 0.726627] xen: registering gsi 3 triggering 1 polarity 0 [ 0.726640] pnp 00:04: [dma 0 disabled] [ 0.727253] pnp: PnP ACPI: found 5 devices [ 0.758495] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.758652] NET: Registered PF_INET protocol family [ 0.758813] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.759217] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.759369] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.759518] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.759667] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.759835] TCP: Hash tables configured (established 4096 bind 4096) [ 0.760023] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.760184] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.760338] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.760784] RPC: Registered named UNIX socket transport module. [ 0.760946] RPC: Registered udp transport module. [ 0.761085] RPC: Registered tcp transport module. [ 0.761200] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.761745] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.761916] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.762092] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.762278] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.762424] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.762599] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.762771] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.762905] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.763090] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.763219] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.763363] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.763506] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.763671] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.763793] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.763936] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.764098] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.764246] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.764367] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.764511] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.764653] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.764796] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.764918] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.765105] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.765250] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.765394] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.765528] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.765661] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.765831] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.766019] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.766208] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.766329] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.766507] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.766668] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.766786] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.766924] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.767115] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.767237] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.767378] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.767543] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.767662] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.767831] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.768032] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.768198] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.768351] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.768503] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.768655] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.768806] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.768971] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.769168] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.769323] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.769442] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.769580] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.769713] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.769885] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.770059] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.770180] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.770298] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.770418] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.770571] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.770689] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.770807] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.770951] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.771085] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.771206] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.771321] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.771440] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.771555] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.771673] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.771789] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.771940] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.772079] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.772199] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.772738] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.772969] xen: registering gsi 19 triggering 0 polarity 1 [ 0.772999] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.781852] xen: registering gsi 18 triggering 0 polarity 1 [ 0.781874] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.798301] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 16115 usecs [ 0.798545] xen: registering gsi 18 triggering 0 polarity 1 [ 0.798551] Already setup the GSI :18 [ 0.814404] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 15541 usecs [ 0.814617] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.814798] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.814855] Unpacking initramfs... [ 0.814917] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.815278] kvm: no hardware support for 'kvm_intel' [ 0.823041] has_svm: not amd or hygon [ 0.823156] kvm: no hardware support for 'kvm_amd' [ 0.823272] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.823511] clocksource: Switched to clocksource tsc [ 0.826218] Initialise system trusted keyrings [ 0.826536] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.828057] NFS: Registering the id_resolver key type [ 0.828181] Key type id_resolver registered [ 0.828292] Key type id_legacy registered [ 0.828521] 9p: Installing v9fs 9p2000 file system support [ 0.842379] Key type asymmetric registered [ 0.842521] Asymmetric key parser 'x509' registered [ 0.842658] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.842817] io scheduler mq-deadline registered [ 0.842930] io scheduler kyber registered [ 0.843926] xen: registering gsi 16 triggering 0 polarity 1 [ 0.843955] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.844571] xen: registering gsi 16 triggering 0 polarity 1 [ 0.844579] Already setup the GSI :16 [ 0.845196] xen: registering gsi 16 triggering 0 polarity 1 [ 0.845202] Already setup the GSI :16 [ 0.845576] xen: registering gsi 16 triggering 0 polarity 1 [ 0.845581] Already setup the GSI :16 [ 0.845901] xen: registering gsi 16 triggering 0 polarity 1 [ 0.845905] Already setup the GSI :16 [ 0.846500] xen: registering gsi 16 triggering 0 polarity 1 [ 0.846506] Already setup the GSI :16 [ 0.847086] xen: registering gsi 16 triggering 0 polarity 1 [ 0.847091] Already setup the GSI :16 [ 0.847544] xen: registering gsi 17 triggering 0 polarity 1 [ 0.847561] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.847898] xen: registering gsi 19 triggering 0 polarity 1 [ 0.847903] Already setup the GSI :19 [ 0.848345] xen: registering gsi 16 triggering 0 polarity 1 [ 0.848349] Already setup the GSI :16 [ 0.849034] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.849209] ACPI: button: Power Button [PWRB] [ 0.849352] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.849624] ACPI: button: Power Button [PWRF] [ 0.849906] Monitor-Mwait will be used to enter C-1 state [ 0.849941] Monitor-Mwait will be used to enter C-2 state [ 0.849958] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.850288] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.850628] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.850999] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.851738] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.852251] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.852657] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.861613] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.862595] xen:xen_evtchn: Event-channel device installed [ 0.862796] xen_pciback: backend is vpci [ 0.863643] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.863959] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.864733] hpet_acpi_add: no address or irqs in _CRS [ 0.864947] Non-volatile memory driver v1.3 [ 0.865060] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.867924] loop: module loaded [ 0.874625] ahci 0000:00:1f.2: version 3.0 [ 0.874731] xen: registering gsi 16 triggering 0 polarity 1 [ 0.874741] Already setup the GSI :16 [ 0.875068] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.875217] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.891109] scsi host0: ahci [ 0.891476] scsi host1: ahci [ 0.891778] scsi host2: ahci [ 0.892088] scsi host3: ahci [ 0.892392] scsi host4: ahci [ 0.892711] scsi host5: ahci [ 0.892853] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 0.892999] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 0.893142] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 0.893285] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 0.893428] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 0.893582] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 0.894021] tun: Universal TUN/TAP device driver, 1.6 [ 0.894300] e100: Intel(R) PRO/100 Network Driver [ 0.894421] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.894589] sky2: driver version 1.30 [ 0.894779] xen_netfront: Initialising Xen virtual ethernet driver [ 0.895152] xen: registering gsi 18 triggering 0 polarity 1 [ 0.895162] Already setup the GSI :18 [ 0.895367] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.895564] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.895740] ehci-pci 0000:00:1a.0: debug port 2 [ 0.899872] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.906492] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.906714] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.906861] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.907003] usb usb1: Product: EHCI Host Controller [ 0.907117] usb usb1: Manufacturer: Linux 6.1.111+ ehci_hcd [ 0.907232] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.907527] hub 1-0:1.0: USB hub found [ 0.907661] hub 1-0:1.0: 2 ports detected [ 0.908025] xen: registering gsi 18 triggering 0 polarity 1 [ 0.908035] Already setup the GSI :18 [ 0.908226] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.908452] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.908627] ehci-pci 0000:00:1d.0: debug port 2 [ 0.912705] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.919509] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.919750] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.919898] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.920041] usb usb2: Product: EHCI Host Controller [ 0.920162] usb usb2: Manufacturer: Linux 6.1.111+ ehci_hcd [ 0.920280] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.920659] hub 2-0:1.0: USB hub found [ 0.920788] hub 2-0:1.0: 2 ports detected [ 0.921256] xen: registering gsi 19 triggering 0 polarity 1 [ 0.921268] Already setup the GSI :19 [ 0.921506] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.921725] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.921785] Freeing initrd memory: 20624K [ 0.922951] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.923427] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.923617] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.923764] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.923970] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.924117] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.924262] usb usb3: Product: xHCI Host Controller [ 0.924398] usb usb3: Manufacturer: Linux 6.1.111+ xhci-hcd [ 0.924528] usb usb3: SerialNumber: 0000:00:14.0 [ 0.924813] hub 3-0:1.0: USB hub found [ 0.924945] hub 3-0:1.0: 8 ports detected [ 0.926069] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.926219] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.926361] usb usb4: Product: xHCI Host Controller [ 0.926487] usb usb4: Manufacturer: Linux 6.1.111+ xhci-hcd [ 0.926602] usb usb4: SerialNumber: 0000:00:14.0 [ 0.926863] hub 4-0:1.0: USB hub found [ 0.926994] hub 4-0:1.0: 6 ports detected [ 0.928087] usbcore: registered new interface driver usblp [ 0.928221] usbcore: registered new interface driver usb-storage [ 0.928389] i8042: PNP: No PS/2 controller found. [ 0.928738] rtc_cmos 00:00: RTC can wake from S4 [ 0.929383] rtc_cmos 00:00: registered as rtc0 [ 0.929551] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.929746] device-mapper: uevent: version 1.0.3 [ 0.929841] xen: registering gsi 18 triggering 0 polarity 1 [ 0.929875] Already setup the GSI :18 [ 0.929989] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.930019] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.930140] intel_pstate: CPU model not supported [ 0.930171] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.930271] hid: raw HID events driver (C) Jiri Kosina [ 0.930734] usbcore: registered new interface driver usbhid [ 0.930809] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.930851] usbhid: USB HID core driver [ 0.931586] Initializing XFRM netlink socket [ 0.931820] NET: Registered PF_INET6 protocol family [ 0.932358] Segment Routing with IPv6 [ 0.932499] In-situ OAM (IOAM) with IPv6 [ 0.932677] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.932914] NET: Registered PF_PACKET protocol family [ 0.933066] 9pnet: Installing 9P2000 support [ 0.933193] Key type dns_resolver registered [ 0.933979] IPI shorthand broadcast: enabled [ 0.934118] sched_clock: Marking stable (896495252, 37431632)->(1777715567, -843788683) [ 0.934718] registered taskstats version 1 [ 0.934833] Loading compiled-in X.509 certificates [ 0.937523] PM: Magic number: 8:623:199 [ 0.937710] acpi device:54: hash matches [ 0.937867] printk: console [netcon0] enabled [ 0.937980] netconsole: network logging started [ 0.938340] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.950202] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.950583] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.951276] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.951459] ALSA device list: [ 0.951641] No soundcards found. [ 1.144518] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.160505] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.168559] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.205040] ata6: SATA link down (SStatus 0 SControl 300) [ 1.205180] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.205321] ata1: SATA link down (SStatus 0 SControl 300) [ 1.205490] ata5: SATA link down (SStatus 0 SControl 300) [ 1.205640] ata2: SATA link down (SStatus 0 SControl 300) [ 1.205797] ata4: SATA link down (SStatus 0 SControl 300) [ 1.206387] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.273111] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.273311] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.273723] hub 1-1:1.0: USB hub found [ 1.273933] hub 1-1:1.0: 4 ports detected [ 1.289058] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.289213] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.289594] hub 2-1:1.0: USB hub found [ 1.289809] hub 2-1:1.0: 4 ports detected [ 1.291690] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.291825] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.296277] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.296446] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.296569] usb 3-3: Product: USB2.0 Hub [ 1.297394] hub 3-3:1.0: USB hub found [ 1.297921] hub 3-3:1.0: 4 ports detected [ 1.319420] ata3.00: configured for UDMA/133 [ 1.319736] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.320640] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.320713] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.320958] sd 2:0:0:0: [sda] Write Protect is off [ 1.321078] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.321143] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.321373] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.340890] sda: sda1 sda2 < sda5 > [ 1.341343] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.342590] Freeing unused kernel image (initmem) memory: 1580K [ 1.342717] Write protecting the kernel read-only data: 22528k [ 1.360633] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.361909] Freeing unused kernel image (rodata/data gap) memory: 1560K [ 1.823322] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.823526] Run /init as init process [ 1.823647] with arguments: [ 1.823649] /init [ 1.823650] placeholder [ 1.823651] with environment: [ 1.823652] HOME=/ [ 1.823653] TERM=linux [ 1.875533] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 2.001807] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 2.001967] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.002793] hub 3-4:1.0: USB hub found [ 2.002991] hub 3-4:1.0: 4 ports detected [ 2.065481] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 2.142848] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 2.142999] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.143147] usb 3-3.2: Product: USB2.0 Hub [ 2.144023] hub 3-3.2:1.0: USB hub found [ 2.144482] hub 3-3.2:1.0: 4 ports detected [ 2.255170] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.255356] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.255914] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.256209] xen: registering gsi 16 triggering 0 polarity 1 [ 2.256222] Already setup the GSI :16 [ 2.259649] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.259773] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.259968] xen: registering gsi 16 triggering 0 polarity 1 [ 2.259975] Already setup the GSI :16 [ 2.287681] pps pps0: new PPS source ptp0 [ 2.287864] igb 0000:07:00.0: added PHC on eth0 [ 2.287997] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.288117] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.288281] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.288396] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.288656] xen: registering gsi 17 triggering 0 polarity 1 [ 2.288665] Already setup the GSI :17 [ 2.299484] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 2.318280] pps pps1: new PPS source ptp1 [ 2.318461] igb 0000:08:00.0: added PHC on eth1 [ 2.318594] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.318714] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.318878] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.318993] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.319261] xen: registering gsi 16 triggering 0 polarity 1 [ 2.319269] Already setup the GSI :16 [ 2.376812] igb 0000:0b:00.0: added PHC on eth2 [ 2.376950] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.377071] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.377274] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.377389] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.377654] xen: registering gsi 17 triggering 0 polarity 1 [ 2.377662] Already setup the GSI :17 [ 2.406430] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 2.406605] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.412502] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 2.433646] igb 0000:0b:00.1: added PHC on eth3 [ 2.433784] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.433904] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.434103] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.434218] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.434480] xen: registering gsi 18 triggering 0 polarity 1 [ 2.434489] Already setup the GSI :18 [ 2.490089] igb 0000:0b:00.2: added PHC on eth4 [ 2.490231] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.490351] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.490570] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.490687] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.490926] xen: registering gsi 19 triggering 0 polarity 1 [ 2.490937] Already setup the GSI :19 [ 2.516820] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 2.518301] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 2.518594] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.548589] igb 0000:0b:00.3: added PHC on eth5 [ 2.548726] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.548846] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.549049] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.549164] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.552488] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.567030] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.575716] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.585746] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.594845] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.602043] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 2.993659] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.123394] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.123714] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.420422] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.420820] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.421039] xen: registering gsi 17 triggering 0 polarity 1 [ 3.421050] Already setup the GSI :17 [ 4.161991] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.297859] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.298100] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.588460] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.591220] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 4.603081] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 5.008589] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.016353] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.629989] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.811084] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.835979] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.922750] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.482852] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.483052] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.483224] device enx0cc47a9f87be entered promiscuous mode [ 15.119043] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 15.222645] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 15.222901] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 15.223025] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 15.223309] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready