[ 0.000000] Linux version 6.11.0+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Mon Sep 23 06:31:23 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/rimava1--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000095fff] usable [ 0.000000] Xen: [mem 0x0000000000096000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020069fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SCM/H8SCM, BIOS 3.5 11/25/2013 [ 0.000000] DMI: Memory slots populated: 1/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000013] Xen PV: Detected 6 vCPUS [ 0.037585] tsc: Fast TSC calibration using PIT [ 0.037587] tsc: Detected 3101.103 MHz processor [ 0.037588] tsc: Detected 3101.138 MHz TSC [ 0.037804] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.037808] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.037815] last_pfn = 0xdfeb2 max_arch_pfn = 0x400000000 [ 0.037820] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.037822] MTRRs set to read-only [ 0.037825] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.062872] RAMDISK: [mem 0x04000000-0x05472fff] [ 0.062898] ACPI: Early table checksum verification disabled [ 0.064357] ACPI: RSDP 0x00000000000FA1D0 000024 (v02 ACPIAM) [ 0.064371] ACPI: XSDT 0x00000000DFEA0100 000084 (v01 SMCI 20131125 MSFT 00000097) [ 0.064415] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.064478] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20240827/tbfadt-560) [ 0.064491] ACPI: DSDT 0x00000000DFEA0600 005699 (v01 1BA11 1BA11000 00000000 INTL 20051117) [ 0.064501] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.064511] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.064522] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.064532] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.064542] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.064553] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.064563] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.064573] ACPI: SRAT 0x00000000DFEAA6F0 000108 (v02 AMD AGESA 00000001 AMD 00000001) [ 0.064583] ACPI: SSDT 0x00000000DFEAA800 001158 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.064593] ACPI: EINJ 0x00000000DFEAB960 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.064604] ACPI: BERT 0x00000000DFEABAF0 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.064614] ACPI: ERST 0x00000000DFEABB20 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.064625] ACPI: HEST 0x00000000DFEABD30 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.064629] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.064631] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c98] [ 0.064632] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.064634] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.064635] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.064636] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.064637] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.064638] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.064640] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.064641] ACPI: Reserving SRAT table memory at [mem 0xdfeaa6f0-0xdfeaa7f7] [ 0.064642] ACPI: Reserving SSDT table memory at [mem 0xdfeaa800-0xdfeab957] [ 0.064643] ACPI: Reserving EINJ table memory at [mem 0xdfeab960-0xdfeaba8f] [ 0.064644] ACPI: Reserving BERT table memory at [mem 0xdfeabaf0-0xdfeabb1f] [ 0.064645] ACPI: Reserving ERST table memory at [mem 0xdfeabb20-0xdfeabd2f] [ 0.064646] ACPI: Reserving HEST table memory at [mem 0xdfeabd30-0xdfeabdd7] [ 0.064783] APIC: Switched APIC routing to: Xen PV [ 0.067038] Zone ranges: [ 0.067039] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.067042] DMA32 [mem 0x0000000001000000-0x00000000dfeb1fff] [ 0.067044] Normal empty [ 0.067045] Movable zone start for each node [ 0.067046] Early memory node ranges [ 0.067047] node 0: [mem 0x0000000000001000-0x0000000000095fff] [ 0.067049] node 0: [mem 0x0000000000100000-0x0000000020069fff] [ 0.067051] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020069fff] [ 0.067066] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.067199] On node 0, zone DMA: 106 pages in unavailable ranges [ 0.072951] On node 0, zone DMA32: 32662 pages in unavailable ranges [ 0.072970] p2m virtual area at (____ptrval____), size is 40000000 [ 0.280926] Remapped 106 page(s) [ 0.280935] Remapped 0 non-RAM page(s) [ 0.281442] ACPI: PM-Timer IO Port: 0x808 [ 0.281484] CPU topo: CPU limit of 6 reached. Ignoring further CPUs [ 0.281517] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.281522] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.281548] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.281557] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.281570] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.281576] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.281602] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.281606] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.281620] CPU topo: Max. logical packages: 1 [ 0.281621] CPU topo: Max. logical dies: 1 [ 0.281622] CPU topo: Max. dies per package: 1 [ 0.281629] CPU topo: Max. threads per core: 1 [ 0.281632] CPU topo: Num. cores per package: 6 [ 0.281633] CPU topo: Num. threads per package: 6 [ 0.281634] CPU topo: Allowing 6 present CPUs plus 0 hotplug CPUs [ 0.281635] CPU topo: Rejected CPUs 2 [ 0.281656] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.281658] PM: hibernation: Registered nosave memory: [mem 0x00096000-0x000fffff] [ 0.281661] PM: hibernation: Registered nosave memory: [mem 0x2006a000-0xdfe9dfff] [ 0.281662] PM: hibernation: Registered nosave memory: [mem 0xdfe9e000-0xdfe9ffff] [ 0.281663] PM: hibernation: Registered nosave memory: [mem 0xdfea0000-0xdfeb1fff] [ 0.281666] [mem 0x2006a000-0xdfe9dfff] available for PCI devices [ 0.281670] Booting kernel on Xen [ 0.281672] Xen version: 4.20-unstable (preserve-AD) [ 0.281678] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.288093] setup_percpu: NR_CPUS:64 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1 [ 0.289435] percpu: Embedded 57 pages/cpu s194520 r8192 d30760 u262144 [ 0.289446] pcpu-alloc: s194520 r8192 d30760 u262144 alloc=1*2097152 [ 0.289452] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.289560] xen: PV spinlocks enabled [ 0.289565] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.289568] Kernel command line: placeholder root=/dev/mapper/rimava1--vg-root ro console=hvc0 [ 0.289668] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.289738] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.289882] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.290148] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.290152] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.290156] software IO TLB: area num 8. [ 0.429774] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.432971] Dynamic Preempt: voluntary [ 0.433117] rcu: Preemptible hierarchical RCU implementation. [ 0.433119] rcu: RCU event tracing is enabled. [ 0.433121] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.433124] Trampoline variant of Tasks RCU enabled. [ 0.433126] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.433127] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.433157] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=6. [ 0.439979] NR_IRQS: 4352, nr_irqs: 1016, preallocated irqs: 16 [ 0.440166] xen:events: Using FIFO-based ABI [ 0.440205] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.440210] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.440224] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.440230] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.440235] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.440240] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.440244] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.440249] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.440254] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.440259] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.440264] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.440269] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.440274] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.440279] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.440284] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.440299] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.446353] Console: colour VGA+ 80x25 [ 0.446360] printk: legacy console [tty0] enabled [ 0.460297] printk: legacy console [hvc0] enabled [ 0.460950] ACPI: Core revision 20240827 [ 0.466749] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.466906] Xen: using vcpuop timer interface [ 0.466914] installing Xen timer for CPU 0 [ 0.467167] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cb37aa72a5, max_idle_ns: 440795216971 ns [ 0.467334] Calibrating delay loop (skipped), value calculated using timer frequency.. 6202.27 BogoMIPS (lpj=3101138) [ 0.467530] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.467750] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.467861] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.467978] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.468349] Spectre V2 : Mitigation: Retpolines [ 0.468453] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.468596] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.468707] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.468818] RETBleed: Mitigation: untrained return thunk [ 0.468936] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.469082] Speculative Store Bypass: Vulnerable [ 0.469211] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.469336] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.469445] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.469555] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.469665] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.498149] Freeing SMP alternatives memory: 40K [ 0.498307] pid_max: default: 32768 minimum: 301 [ 0.498390] LSM: initializing lsm=capability,selinux [ 0.498543] SELinux: Initializing. [ 0.498889] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.499040] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.500478] cpu 0 spinlock event irq 57 [ 0.500593] VPMU disabled by hypervisor. [ 0.501161] Performance Events: PMU not available due to virtualization, using software events only. [ 0.501322] signal: max sigframe size: 1776 [ 0.501394] rcu: Hierarchical SRCU implementation. [ 0.501498] rcu: Max phase no-delay instances is 400. [ 0.501707] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.511478] smp: Bringing up secondary CPUs ... [ 0.515363] installing Xen timer for CPU 1 [ 0.515921] installing Xen timer for CPU 2 [ 0.516300] installing Xen timer for CPU 3 [ 0.516587] installing Xen timer for CPU 4 [ 0.519349] installing Xen timer for CPU 5 [ 0.028025] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0011 [ 0.519643] cpu 1 spinlock event irq 87 [ 0.028025] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0012 [ 0.520420] cpu 2 spinlock event irq 88 [ 0.028025] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0013 [ 0.521582] cpu 3 spinlock event irq 89 [ 0.028025] [Firmware Bug]: CPU 4: APIC ID mismatch. CPUID: 0x0004 APIC: 0x0014 [ 0.522393] cpu 4 spinlock event irq 90 [ 0.028025] [Firmware Bug]: CPU 5: APIC ID mismatch. CPUID: 0x0005 APIC: 0x0015 [ 0.523404] cpu 5 spinlock event irq 91 [ 0.523820] smp: Brought up 1 node, 6 CPUs [ 0.524441] Memory: 379860K/524284K available (16384K kernel code, 2784K rwdata, 6296K rodata, 2704K init, 1736K bss, 138752K reserved, 0K cma-reserved) [ 0.524952] devtmpfs: initialized [ 0.524952] x86/mm: Memory block size: 128MB [ 0.531488] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.532553] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.532992] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.534034] PM: RTC time: 07:34:03, date: 2024-09-23 [ 0.535412] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.535968] xen:grant_table: Grant tables using version 1 layout [ 0.536594] Grant table initialized [ 0.540251] audit: initializing netlink subsys (disabled) [ 0.540505] audit: type=2000 audit(1727076843.319:1): state=initialized audit_enabled=0 res=1 [ 0.541445] thermal_sys: Registered thermal governor 'step_wise' [ 0.541481] thermal_sys: Registered thermal governor 'user_space' [ 0.542495] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.542776] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.621870] PCI: Using configuration type 1 for base access [ 0.622134] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.622520] ACPI: Added _OSI(Module Device) [ 0.622520] ACPI: Added _OSI(Processor Device) [ 0.623339] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.623482] ACPI: Added _OSI(Processor Aggregator Device) [ 0.630671] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.631293] xen: registering gsi 9 triggering 0 polarity 1 [ 0.632639] ACPI: Interpreter enabled [ 0.632764] ACPI: PM: (supports S0 S1 S4 S5) [ 0.632870] ACPI: Using IOAPIC for interrupt routing [ 0.633022] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.633210] PCI: Using E820 reservations for host bridge windows [ 0.633482] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.652966] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.653109] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.653298] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.653336] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.653481] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.654001] PCI host bridge to bus 0000:00 [ 0.654107] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.654221] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.654330] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.654512] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.654654] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.654799] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.655309] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.659027] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.662273] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.663264] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.663471] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.663857] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.664617] pci 0000:00:09.0: enabling Extended Tags [ 0.665908] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.667732] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.668700] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.669151] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.669401] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.670127] pci 0000:00:0a.0: enabling Extended Tags [ 0.671251] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.672806] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 conventional PCI endpoint [ 0.672998] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.673133] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.673261] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.673357] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.673487] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.673614] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.674002] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.674191] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.674641] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.674835] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.675230] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.675375] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.675699] pci 0000:00:12.2: supports D1 D2 [ 0.675847] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.676107] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.676294] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.676601] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.676798] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.677208] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.677376] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.677699] pci 0000:00:13.2: supports D1 D2 [ 0.677807] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.678092] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.678602] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.678790] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.678918] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.679045] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.679173] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.679300] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.679387] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.679500] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.679609] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.679727] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.680083] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.680585] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.680814] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.680948] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.681071] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.681383] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.681571] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.681997] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.682388] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.682704] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.683021] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.683376] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.683737] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.684221] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.684385] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.684548] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.684683] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.685048] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.687790] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.688276] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.688386] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.689397] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.689533] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.689934] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.692408] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.692588] pci_bus 0000:03: extended config space not accessible [ 0.692774] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.692969] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.693104] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.693238] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.693476] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.693938] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.694072] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.694219] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.694335] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.694481] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.694626] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.694840] pci_bus 0000:00: on NUMA node 0 [ 0.695552] xen: registering gsi 13 triggering 1 polarity 0 [ 0.696075] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.696272] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.696410] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.696644] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.696836] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.697091] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.697322] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.697403] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.697654] xen:balloon: Initialising balloon driver [ 0.697778] iommu: Default domain type: Translated [ 0.698341] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.698595] SCSI subsystem initialized [ 0.698715] libata version 3.00 loaded. [ 0.698715] ACPI: bus type USB registered [ 0.698715] usbcore: registered new interface driver usbfs [ 0.698715] usbcore: registered new interface driver hub [ 0.699353] usbcore: registered new device driver usb [ 0.699484] pps_core: LinuxPPS API ver. 1 registered [ 0.699590] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.699749] PTP clock support registered [ 0.700409] Advanced Linux Sound Architecture Driver Initialized. [ 0.700883] NetLabel: Initializing [ 0.700994] NetLabel: domain hash size = 128 [ 0.701098] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.701227] NetLabel: unlabeled traffic allowed by default [ 0.701412] PCI: Using ACPI for IRQ routing [ 0.726496] PCI: pci_cache_line_size set to 64 bytes [ 0.726661] e820: reserve RAM buffer [mem 0x00096000-0x0009ffff] [ 0.726665] e820: reserve RAM buffer [mem 0x2006a000-0x23ffffff] [ 0.726690] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.726690] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.726690] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.726728] vgaarb: loaded [ 0.729168] clocksource: Switched to clocksource tsc-early [ 0.729168] VFS: Disk quotas dquot_6.6.0 [ 0.729436] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.729725] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.730553] pnp: PnP ACPI init [ 0.730963] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.731209] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.731776] xen: registering gsi 8 triggering 1 polarity 0 [ 0.732033] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.732433] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.732552] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.733093] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.733204] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.733315] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.733453] system 00:05: [io 0x040b] has been reserved [ 0.733562] system 00:05: [io 0x04d6] has been reserved [ 0.733670] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.733780] system 00:05: [io 0x0c14] has been reserved [ 0.733889] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.734017] system 00:05: [io 0x0c52] has been reserved [ 0.734125] system 00:05: [io 0x0c6c] has been reserved [ 0.734234] system 00:05: [io 0x0c6f] has been reserved [ 0.734356] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.734689] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.735221] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.735481] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.735591] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.735697] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.735806] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.735915] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.736024] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.736133] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.736242] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.736403] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.736525] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.736638] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.737117] xen: registering gsi 4 triggering 1 polarity 0 [ 0.737123] Already setup the GSI :4 [ 0.737222] pnp 00:06: [dma 0 disabled] [ 0.738453] xen: registering gsi 3 triggering 1 polarity 0 [ 0.738465] pnp 00:07: [dma 0 disabled] [ 0.738650] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.739083] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.739275] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.739465] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.739582] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.739697] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.740008] pnp: PnP ACPI: found 10 devices [ 0.767866] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.768090] NET: Registered PF_INET protocol family [ 0.768304] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.768839] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.768992] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.769135] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.769302] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.769555] TCP: Hash tables configured (established 4096 bind 4096) [ 0.769779] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.769908] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.770082] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.771087] RPC: Registered named UNIX socket transport module. [ 0.771203] RPC: Registered udp transport module. [ 0.771399] RPC: Registered tcp transport module. [ 0.771507] RPC: Registered tcp-with-tls transport module. [ 0.771614] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.772583] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.772783] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.772907] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.773041] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.773151] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.773271] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.773450] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.773571] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.773694] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.773855] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.773969] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.774127] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.774241] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.774403] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.774523] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.774630] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.774741] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.774849] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.774959] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.775068] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.775179] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.775288] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.775454] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.775568] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.775680] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.776021] xen: registering gsi 16 triggering 0 polarity 1 [ 0.776103] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.426146] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 635002 usecs [ 1.426554] xen: registering gsi 16 triggering 0 polarity 1 [ 1.426567] Already setup the GSI :16 [ 1.450627] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 23563 usecs [ 1.450887] xen: registering gsi 17 triggering 0 polarity 1 [ 1.450984] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.451178] xen: registering gsi 18 triggering 0 polarity 1 [ 1.451197] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.475148] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 23452 usecs [ 1.475568] xen: registering gsi 18 triggering 0 polarity 1 [ 1.475582] Already setup the GSI :18 [ 1.499580] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 23507 usecs [ 1.499840] xen: registering gsi 19 triggering 0 polarity 1 [ 1.499936] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.500147] xen: registering gsi 18 triggering 0 polarity 1 [ 1.500152] Already setup the GSI :18 [ 1.524127] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 23457 usecs [ 1.524554] PCI: CLS 64 bytes, default 64 [ 1.524701] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.524816] software IO TLB: mapped [mem 0x000000001b200000-0x000000001f200000] (64MB) [ 1.525087] kvm_intel: VMX not supported by CPU 0 [ 1.525199] kvm_amd: SVM not supported by CPU 0 [ 1.525271] Unpacking initramfs... [ 1.525312] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cb37aa72a5, max_idle_ns: 440795216971 ns [ 1.525694] clocksource: Switched to clocksource tsc [ 1.559504] Initialise system trusted keyrings [ 1.560169] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.560684] NFS: Registering the id_resolver key type [ 1.560804] Key type id_resolver registered [ 1.560910] Key type id_legacy registered [ 1.561130] 9p: Installing v9fs 9p2000 file system support [ 1.582210] Key type asymmetric registered [ 1.582411] Asymmetric key parser 'x509' registered [ 1.582583] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.582754] io scheduler mq-deadline registered [ 1.584420] io scheduler kyber registered [ 1.585595] xen: registering gsi 53 triggering 0 polarity 1 [ 1.585684] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.586046] xen: registering gsi 54 triggering 0 polarity 1 [ 1.586064] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.586466] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.586667] ACPI: button: Power Button [PWRB] [ 1.586815] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.587191] ACPI: button: Power Button [PWRF] [ 1.596615] xen:xen_evtchn: Event-channel device installed [ 1.596895] xen_pciback: backend is vpci [ 1.598015] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.598569] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.599493] hpet_acpi_add: no address or irqs in _CRS [ 1.599667] Non-volatile memory driver v1.3 [ 1.604701] loop: module loaded [ 1.630711] ahci 0000:00:11.0: version 3.0 [ 1.630909] xen: registering gsi 22 triggering 0 polarity 1 [ 1.630968] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.631161] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.631316] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.631431] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.633844] scsi host0: ahci [ 1.634919] scsi host1: ahci [ 1.637207] scsi host2: ahci [ 1.638918] scsi host3: ahci [ 1.639957] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 4 [ 1.640522] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 4 [ 1.641013] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 4 [ 1.641551] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 4 [ 1.642824] tun: Universal TUN/TAP device driver, 1.6 [ 1.643140] e100: Intel(R) PRO/100 Network Driver [ 1.643251] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.643381] sky2: driver version 1.30 [ 1.643538] xen_netfront: Initialising Xen virtual ethernet driver [ 1.644937] xen: registering gsi 17 triggering 0 polarity 1 [ 1.644960] Already setup the GSI :17 [ 1.645186] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.645400] xen: registering gsi 16 triggering 0 polarity 1 [ 1.645414] Already setup the GSI :16 [ 1.645547] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.646145] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.646772] ehci-pci 0000:00:12.2: debug port 1 [ 1.647961] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.649243] xen: registering gsi 19 triggering 0 polarity 1 [ 1.649275] Already setup the GSI :19 [ 1.655136] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.655364] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 1.655511] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.655653] usb usb1: Product: EHCI Host Controller [ 1.655759] usb usb1: Manufacturer: Linux 6.11.0+ ehci_hcd [ 1.655867] usb usb1: SerialNumber: 0000:00:12.2 [ 1.656382] hub 1-0:1.0: USB hub found [ 1.656501] hub 1-0:1.0: 6 ports detected [ 1.656991] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.657567] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 2 [ 1.657845] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.712340] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.712538] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.712721] usb usb2: Product: OHCI PCI host controller [ 1.712827] usb usb2: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.712935] usb usb2: SerialNumber: 0000:00:12.0 [ 1.713391] hub 2-0:1.0: USB hub found [ 1.713507] hub 2-0:1.0: 3 ports detected [ 1.713940] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.714063] xen: registering gsi 16 triggering 0 polarity 1 [ 1.714145] Already setup the GSI :16 [ 1.714317] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 1.714471] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.714644] ehci-pci 0000:00:13.2: debug port 1 [ 1.714938] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 1.721218] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.721466] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 1.721613] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.721755] usb usb3: Product: EHCI Host Controller [ 1.721861] usb usb3: Manufacturer: Linux 6.11.0+ ehci_hcd [ 1.721968] usb usb3: SerialNumber: 0000:00:13.2 [ 1.722389] hub 3-0:1.0: USB hub found [ 1.722505] hub 3-0:1.0: 6 ports detected [ 1.722938] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.723316] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.723548] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 1.769705] Freeing initrd memory: 20940K [ 1.778697] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.779238] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.779631] usb usb4: Product: OHCI PCI host controller [ 1.779973] usb usb4: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.780384] usb usb4: SerialNumber: 0000:00:12.1 [ 1.781895] hub 4-0:1.0: USB hub found [ 1.782443] hub 4-0:1.0: 3 ports detected [ 1.785193] xen: registering gsi 18 triggering 0 polarity 1 [ 1.785235] Already setup the GSI :18 [ 1.785822] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.786723] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.787547] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 1.842764] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.843349] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.843760] usb usb5: Product: OHCI PCI host controller [ 1.844166] usb usb5: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.844502] usb usb5: SerialNumber: 0000:00:13.0 [ 1.845433] hub 5-0:1.0: USB hub found [ 1.845582] hub 5-0:1.0: 3 ports detected [ 1.846312] xen: registering gsi 18 triggering 0 polarity 1 [ 1.846330] Already setup the GSI :18 [ 1.846498] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.846769] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.846976] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 1.902314] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.902501] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.902644] usb usb6: Product: OHCI PCI host controller [ 1.902750] usb usb6: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.902856] usb usb6: SerialNumber: 0000:00:13.1 [ 1.903376] hub 6-0:1.0: USB hub found [ 1.903492] hub 6-0:1.0: 3 ports detected [ 1.904054] xen: registering gsi 18 triggering 0 polarity 1 [ 1.904066] Already setup the GSI :18 [ 1.904239] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.904456] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.904719] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 1.954644] ata4: SATA link down (SStatus 0 SControl 300) [ 1.954883] ata3: SATA link down (SStatus 0 SControl 300) [ 1.959302] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.959460] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.959602] usb usb7: Product: OHCI PCI host controller [ 1.959709] usb usb7: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.959815] usb usb7: SerialNumber: 0000:00:14.5 [ 1.960535] hub 7-0:1.0: USB hub found [ 1.960652] hub 7-0:1.0: 2 ports detected [ 1.961073] usbcore: registered new interface driver usblp [ 1.961198] usbcore: registered new interface driver usb-storage [ 1.961417] i8042: PNP: No PS/2 controller found. [ 1.961521] i8042: Probing ports directly. [ 1.965157] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.965535] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.967538] rtc_cmos 00:02: RTC can wake from S4 [ 1.968103] rtc_cmos 00:02: registered as rtc0 [ 1.968262] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 1.968461] device-mapper: uevent: version 1.0.3 [ 1.968729] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 1.968885] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.969060] hid: raw HID events driver (C) Jiri Kosina [ 1.969420] usbcore: registered new interface driver usbhid [ 1.969528] usbhid: USB HID core driver [ 1.970660] Initializing XFRM netlink socket [ 1.970789] NET: Registered PF_INET6 protocol family [ 1.971644] Segment Routing with IPv6 [ 1.971762] In-situ OAM (IOAM) with IPv6 [ 1.971905] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.973190] NET: Registered PF_PACKET protocol family [ 1.973746] 9pnet: Installing 9P2000 support [ 1.974297] Key type dns_resolver registered [ 1.974737] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.977129] IPI shorthand broadcast: enabled [ 2.004286] sched_clock: Marking stable (1977003536, 27025085)->(2015780832, -11752211) [ 2.004960] registered taskstats version 1 [ 2.005074] Loading compiled-in X.509 certificates [ 2.007571] PM: Magic number: 8:517:572 [ 2.007847] printk: legacy console [netcon0] enabled [ 2.009421] netconsole: network logging started [ 2.009792] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.059666] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.060233] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 2.061101] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 2.061307] ALSA device list: [ 2.061407] No soundcards found. [ 2.107196] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.107365] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.109566] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 2.110187] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.110616] ata2.00: ATAPI: ATAPI iHAS124 E, 4L07, max UDMA/100 [ 2.111666] ata2.00: configured for UDMA/100 [ 2.111938] ata1.00: configured for UDMA/133 [ 2.122567] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.123334] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.123358] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.123634] sd 0:0:0:0: [sda] Write Protect is off [ 2.123742] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.123766] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.124007] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.127757] scsi 1:0:0:0: CD-ROM ATAPI iHAS124 E 4L07 PQ: 0 ANSI: 5 [ 2.154708] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.154900] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.157703] sda: sda1 sda2 < sda5 > [ 2.158707] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.170260] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.170538] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.178903] Freeing unused kernel image (initmem) memory: 2704K [ 2.179157] Write protecting the kernel read-only data: 24576k [ 2.226647] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.228759] Freeing unused kernel image (rodata/data gap) memory: 1896K [ 2.339107] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.339272] Run /init as init process [ 2.339384] with arguments: [ 2.339385] /init [ 2.339387] placeholder [ 2.339389] with environment: [ 2.339390] HOME=/ [ 2.339391] TERM=linux [ 2.386169] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.386394] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.386510] usb 6-2: Product: Hermon USB hidmouse Device [ 2.386617] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.392710] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.393505] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.396528] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.517425] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.730537] e1000e: Intel(R) PRO/1000 Network Driver [ 2.730667] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.730913] xen: registering gsi 48 triggering 0 polarity 1 [ 2.730956] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.731206] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.772876] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.815909] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0a:48:f6 [ 2.816070] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.816259] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 2.816464] xen: registering gsi 47 triggering 0 polarity 1 [ 2.816492] xen: --> pirq=47 -> irq=47 (gsi=47) [ 2.816675] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.862163] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.908111] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0a:48:f7 [ 2.908262] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.908450] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 2.910420] e1000e 0000:01:00.0 enx0cc47a0a48f6: renamed from eth0 [ 2.910742] e1000e 0000:02:00.0 enx0cc47a0a48f7: renamed from eth1 [ 3.096060] random: crng init done [ 3.732276] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.737507] EXT4-fs (dm-0): mounted filesystem 303c3ee0-8183-4c18-906b-82b7d388d7e2 ro with ordered data mode. Quota mode: none. [ 7.479329] EXT4-fs (dm-0): re-mounted 303c3ee0-8183-4c18-906b-82b7d388d7e2 r/w. Quota mode: none. [ 8.561660] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 8.584225] EXT4-fs (sda1): mounted filesystem 8aa0de75-eeb3-452b-b346-6b8845b2e600 r/w with ordered data mode. Quota mode: none. [ 8.668271] Adding 1949692k swap on /dev/mapper/rimava1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 10.163994] xenbr0: port 1(enx0cc47a0a48f6) entered blocking state [ 10.164220] xenbr0: port 1(enx0cc47a0a48f6) entered disabled state [ 10.164338] e1000e 0000:01:00.0 enx0cc47a0a48f6: entered allmulticast mode [ 10.164491] e1000e 0000:01:00.0 enx0cc47a0a48f6: entered promiscuous mode [ 13.297098] e1000e 0000:01:00.0 enx0cc47a0a48f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 13.297494] xenbr0: port 1(enx0cc47a0a48f6) entered blocking state [ 13.297635] xenbr0: port 1(enx0cc47a0a48f6) entered forwarding state