[ 0.000000] Linux version 6.11.0+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Mon Sep 23 06:31:23 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/pinot0--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000f6000000-0x00000000f6003fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SML/H8SML, BIOS 3.5 11/25/2013 [ 0.000000] DMI: Memory slots populated: 2/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000011] Xen PV: Detected 4 vCPUS [ 0.038870] tsc: Fast TSC calibration using PIT [ 0.038871] tsc: Detected 2800.053 MHz processor [ 0.038872] tsc: Detected 2799.996 MHz TSC [ 0.039093] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.039097] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.039103] last_pfn = 0xdfeb2 max_arch_pfn = 0x400000000 [ 0.039106] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.039108] MTRRs set to read-only [ 0.039111] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.065080] RAMDISK: [mem 0x04000000-0x05472fff] [ 0.065091] ACPI: Early table checksum verification disabled [ 0.065840] ACPI: RSDP 0x00000000000FA1C0 000024 (v02 ACPIAM) [ 0.065849] ACPI: XSDT 0x00000000DFEA0100 00007C (v01 SMCI 20131125 MSFT 00000097) [ 0.065874] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.065906] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20240827/tbfadt-560) [ 0.065917] ACPI: DSDT 0x00000000DFEA0600 00562B (v01 1CF11 1CF11000 00000000 INTL 20051117) [ 0.065927] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.065935] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.065945] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.065955] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.065964] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.065974] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.065984] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.065993] ACPI: SSDT 0x00000000DFEAA6F0 000B9C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.066002] ACPI: EINJ 0x00000000DFEAB290 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.066012] ACPI: BERT 0x00000000DFEAB420 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.066021] ACPI: ERST 0x00000000DFEAB450 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.066031] ACPI: HEST 0x00000000DFEAB660 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.066036] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.066038] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c2a] [ 0.066039] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.066040] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.066041] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.066043] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.066044] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.066045] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.066046] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.066047] ACPI: Reserving SSDT table memory at [mem 0xdfeaa6f0-0xdfeab28b] [ 0.066048] ACPI: Reserving EINJ table memory at [mem 0xdfeab290-0xdfeab3bf] [ 0.066049] ACPI: Reserving BERT table memory at [mem 0xdfeab420-0xdfeab44f] [ 0.066050] ACPI: Reserving ERST table memory at [mem 0xdfeab450-0xdfeab65f] [ 0.066052] ACPI: Reserving HEST table memory at [mem 0xdfeab660-0xdfeab707] [ 0.066140] APIC: Switched APIC routing to: Xen PV [ 0.068532] Zone ranges: [ 0.068533] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.068536] DMA32 [mem 0x0000000001000000-0x00000000dfeb1fff] [ 0.068538] Normal empty [ 0.068539] Movable zone start for each node [ 0.068539] Early memory node ranges [ 0.068540] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.068542] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.068544] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.068551] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.068611] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.070988] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.070993] p2m virtual area at (____ptrval____), size is 40000000 [ 0.290924] Remapped 102 page(s) [ 0.290926] Remapped 0 non-RAM page(s) [ 0.291435] ACPI: PM-Timer IO Port: 0x808 [ 0.291460] CPU topo: CPU limit of 4 reached. Ignoring further CPUs [ 0.291483] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.291486] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.291505] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.291512] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.291521] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.291525] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.291543] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.291546] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.291557] CPU topo: Max. logical packages: 1 [ 0.291558] CPU topo: Max. logical dies: 1 [ 0.291559] CPU topo: Max. dies per package: 1 [ 0.291565] CPU topo: Max. threads per core: 1 [ 0.291566] CPU topo: Num. cores per package: 4 [ 0.291567] CPU topo: Num. threads per package: 4 [ 0.291568] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.291569] CPU topo: Rejected CPUs 4 [ 0.291583] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.291586] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.291587] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.291589] PM: hibernation: Registered nosave memory: [mem 0x20066000-0xdfe9dfff] [ 0.291590] PM: hibernation: Registered nosave memory: [mem 0xdfe9e000-0xdfe9ffff] [ 0.291591] PM: hibernation: Registered nosave memory: [mem 0xdfea0000-0xdfeb1fff] [ 0.291594] [mem 0x20066000-0xdfe9dfff] available for PCI devices [ 0.291597] Booting kernel on Xen [ 0.291598] Xen version: 4.20-unstable (preserve-AD) [ 0.291602] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.297929] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.298485] percpu: Embedded 57 pages/cpu s194520 r8192 d30760 u524288 [ 0.298492] pcpu-alloc: s194520 r8192 d30760 u524288 alloc=1*2097152 [ 0.298496] pcpu-alloc: [0] 0 1 2 3 [ 0.298553] xen: PV spinlocks enabled [ 0.298556] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.298559] Kernel command line: placeholder root=/dev/mapper/pinot0--vg-root ro console=hvc0 [ 0.298614] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.298736] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.298794] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.298978] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.298982] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.298984] software IO TLB: area num 4. [ 0.368329] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.370826] Dynamic Preempt: voluntary [ 0.370924] rcu: Preemptible hierarchical RCU implementation. [ 0.370925] rcu: RCU event tracing is enabled. [ 0.370926] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.370927] Trampoline variant of Tasks RCU enabled. [ 0.370928] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.370930] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.370947] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.377741] NR_IRQS: 4352, nr_irqs: 1000, preallocated irqs: 16 [ 0.377868] xen:events: Using FIFO-based ABI [ 0.377891] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.377900] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.377906] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.377911] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.377916] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.377921] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.377926] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.377931] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.377935] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.377940] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.377946] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.377951] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.377955] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.377960] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.377965] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.377974] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.384067] Console: colour VGA+ 80x25 [ 0.384071] printk: legacy console [tty0] enabled [ 0.398114] printk: legacy console [hvc0] enabled [ 0.398814] ACPI: Core revision 20240827 [ 0.402937] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.403095] Xen: using vcpuop timer interface [ 0.403101] installing Xen timer for CPU 0 [ 0.403362] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c3d4ddab, max_idle_ns: 440795322762 ns [ 0.403521] Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.99 BogoMIPS (lpj=2799996) [ 0.403714] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.403925] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.404035] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.404149] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.404531] Spectre V2 : Mitigation: Retpolines [ 0.404651] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.404794] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.404905] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.405015] RETBleed: Mitigation: untrained return thunk [ 0.405121] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.405266] Speculative Store Bypass: Vulnerable [ 0.405391] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.405524] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.405634] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.405772] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.405881] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.429718] Freeing SMP alternatives memory: 40K [ 0.429841] pid_max: default: 32768 minimum: 301 [ 0.429971] LSM: initializing lsm=capability,selinux [ 0.430127] SELinux: Initializing. [ 0.430428] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.430524] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.432647] cpu 0 spinlock event irq 57 [ 0.432760] VPMU disabled by hypervisor. [ 0.433322] Performance Events: PMU not available due to virtualization, using software events only. [ 0.433511] signal: max sigframe size: 1776 [ 0.434544] rcu: Hierarchical SRCU implementation. [ 0.434653] rcu: Max phase no-delay instances is 400. [ 0.434874] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.444532] smp: Bringing up secondary CPUs ... [ 0.446540] installing Xen timer for CPU 1 [ 0.446951] installing Xen timer for CPU 2 [ 0.447309] installing Xen timer for CPU 3 [ 0.026541] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0011 [ 0.447582] cpu 1 spinlock event irq 77 [ 0.026541] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0012 [ 0.447839] cpu 2 spinlock event irq 78 [ 0.026541] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0013 [ 0.448577] cpu 3 spinlock event irq 79 [ 0.448840] smp: Brought up 1 node, 4 CPUs [ 0.448848] Memory: 381936K/524284K available (16384K kernel code, 2784K rwdata, 6296K rodata, 2704K init, 1736K bss, 138296K reserved, 0K cma-reserved) [ 0.449525] devtmpfs: initialized [ 0.449669] x86/mm: Memory block size: 128MB [ 0.450287] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.450578] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.450730] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.450943] PM: RTC time: 06:58:06, date: 2024-09-23 [ 0.451254] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.451412] xen:grant_table: Grant tables using version 1 layout [ 0.451538] Grant table initialized [ 0.451872] audit: initializing netlink subsys (disabled) [ 0.452020] audit: type=2000 audit(1727074686.735:1): state=initialized audit_enabled=0 res=1 [ 0.452020] thermal_sys: Registered thermal governor 'step_wise' [ 0.452020] thermal_sys: Registered thermal governor 'user_space' [ 0.452733] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.452992] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.533904] PCI: Using configuration type 1 for base access [ 0.534089] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.534591] ACPI: Added _OSI(Module Device) [ 0.534699] ACPI: Added _OSI(Processor Device) [ 0.534807] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.534915] ACPI: Added _OSI(Processor Aggregator Device) [ 0.540402] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.540989] xen: registering gsi 9 triggering 0 polarity 1 [ 0.541925] ACPI: Interpreter enabled [ 0.542054] ACPI: PM: (supports S0 S1 S4 S5) [ 0.542156] ACPI: Using IOAPIC for interrupt routing [ 0.542569] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.542753] PCI: Using E820 reservations for host bridge windows [ 0.543034] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.553044] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.553170] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.553322] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.553432] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.553523] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.553947] PCI host bridge to bus 0000:00 [ 0.554052] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.554182] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.554293] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.554439] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.554523] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.554666] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.554820] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.555380] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.555899] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.556113] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.556231] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.556345] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.556533] pci 0000:00:09.0: enabling Extended Tags [ 0.556761] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.557051] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.557274] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.557392] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.557506] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.557605] pci 0000:00:0a.0: enabling Extended Tags [ 0.557828] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.558135] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f conventional PCI endpoint [ 0.558325] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.558477] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.558551] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.558680] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.558835] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.558963] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.559126] pci 0000:00:11.0: set SATA to AHCI mode [ 0.559451] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.559570] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.559994] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.560182] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.560585] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.560772] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.561169] pci 0000:00:12.2: supports D1 D2 [ 0.561271] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.561544] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.561733] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.562116] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.562367] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.562774] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.562962] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.563297] pci 0000:00:13.2: supports D1 D2 [ 0.563398] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.563705] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.564218] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.564406] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.564539] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.564667] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.564816] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.564943] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.565111] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.565221] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.565329] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.565439] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.565716] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.566238] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.566478] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.566539] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.566661] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.566941] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.567143] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.567546] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.567897] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.568210] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.568563] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.568911] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.569224] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.569701] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.569894] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.570057] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.570190] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.570571] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.572564] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.572858] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.573078] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.573281] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.573467] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.573785] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.575568] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.575738] pci_bus 0000:03: extended config space not accessible [ 0.575912] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.576572] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.576710] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.576871] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.577108] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.577507] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.577543] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.577690] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.577835] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.577998] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.578144] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.578392] pci_bus 0000:00: on NUMA node 0 [ 0.578889] xen: registering gsi 13 triggering 1 polarity 0 [ 0.579356] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.579578] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.579757] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.579932] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.580105] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.580301] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.580551] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.580735] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.580951] xen:balloon: Initialising balloon driver [ 0.581096] iommu: Default domain type: Translated [ 0.581096] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.581629] SCSI subsystem initialized [ 0.581741] libata version 3.00 loaded. [ 0.581741] ACPI: bus type USB registered [ 0.581741] usbcore: registered new interface driver usbfs [ 0.581805] usbcore: registered new interface driver hub [ 0.581919] usbcore: registered new device driver usb [ 0.582041] pps_core: LinuxPPS API ver. 1 registered [ 0.582145] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.582527] PTP clock support registered [ 0.582681] Advanced Linux Sound Architecture Driver Initialized. [ 0.582968] NetLabel: Initializing [ 0.583066] NetLabel: domain hash size = 128 [ 0.583168] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.583541] NetLabel: unlabeled traffic allowed by default [ 0.583673] PCI: Using ACPI for IRQ routing [ 0.610400] PCI: pci_cache_line_size set to 64 bytes [ 0.610589] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.610593] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.610618] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.610657] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.610764] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.610909] vgaarb: loaded [ 0.611219] clocksource: Switched to clocksource tsc-early [ 0.611332] VFS: Disk quotas dquot_6.6.0 [ 0.611332] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.611332] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.611332] pnp: PnP ACPI init [ 0.611501] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.611711] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.611711] xen: registering gsi 8 triggering 1 polarity 0 [ 0.611711] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.612692] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.612808] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.613232] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.613368] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.613477] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.613596] system 00:05: [io 0x040b] has been reserved [ 0.613742] system 00:05: [io 0x04d6] has been reserved [ 0.613847] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.613956] system 00:05: [io 0x0c14] has been reserved [ 0.614061] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.614169] system 00:05: [io 0x0c52] has been reserved [ 0.614274] system 00:05: [io 0x0c6c] has been reserved [ 0.614380] system 00:05: [io 0x0c6f] has been reserved [ 0.614485] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.614619] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.614728] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.614835] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.614944] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.615051] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.615197] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.615305] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.615413] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.615532] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.615641] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.615750] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.615886] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.615997] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.616343] xen: registering gsi 4 triggering 1 polarity 0 [ 0.616347] Already setup the GSI :4 [ 0.616447] pnp 00:06: [dma 0 disabled] [ 0.616745] xen: registering gsi 3 triggering 1 polarity 0 [ 0.616755] pnp 00:07: [dma 0 disabled] [ 0.616904] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.617273] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.617455] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.617583] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.617696] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.617807] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.618070] pnp: PnP ACPI: found 10 devices [ 0.637624] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.637762] NET: Registered PF_INET protocol family [ 0.637924] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.638323] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.638470] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.638638] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.638846] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.639034] TCP: Hash tables configured (established 4096 bind 4096) [ 0.639166] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.639279] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.639427] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.639727] RPC: Registered named UNIX socket transport module. [ 0.639837] RPC: Registered udp transport module. [ 0.639939] RPC: Registered tcp transport module. [ 0.640041] RPC: Registered tcp-with-tls transport module. [ 0.640173] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.640704] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.640817] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.640935] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.641061] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.641168] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.641283] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.641410] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.641577] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.641697] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.641851] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.641961] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.642070] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.642180] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.642291] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.642402] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.642508] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.642628] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.642760] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.642873] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.642991] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.643101] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.643209] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.643317] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.643428] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.643550] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.643796] xen: registering gsi 16 triggering 0 polarity 1 [ 0.643819] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.305673] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 646427 usecs [ 1.305899] xen: registering gsi 16 triggering 0 polarity 1 [ 1.305907] Already setup the GSI :16 [ 1.328671] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 22290 usecs [ 1.328901] xen: registering gsi 17 triggering 0 polarity 1 [ 1.328946] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.329112] xen: registering gsi 18 triggering 0 polarity 1 [ 1.329128] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.351672] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 22081 usecs [ 1.351896] xen: registering gsi 18 triggering 0 polarity 1 [ 1.351904] Already setup the GSI :18 [ 1.374670] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 22291 usecs [ 1.374898] xen: registering gsi 19 triggering 0 polarity 1 [ 1.374935] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.375122] xen: registering gsi 18 triggering 0 polarity 1 [ 1.375125] Already setup the GSI :18 [ 1.398672] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 23048 usecs [ 1.398897] PCI: CLS 64 bytes, default 64 [ 1.399032] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.399141] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 1.399328] kvm_intel: VMX not supported by CPU 1 [ 1.399432] kvm_amd: SVM not supported by CPU 1 [ 1.399549] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c3d4ddab, max_idle_ns: 440795322762 ns [ 1.401295] clocksource: Switched to clocksource tsc [ 1.401548] Unpacking initramfs... [ 1.493571] Initialise system trusted keyrings [ 1.493851] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.494183] NFS: Registering the id_resolver key type [ 1.494338] Key type id_resolver registered [ 1.494439] Key type id_legacy registered [ 1.494635] 9p: Installing v9fs 9p2000 file system support [ 1.512306] Key type asymmetric registered [ 1.512435] Asymmetric key parser 'x509' registered [ 1.512561] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.512713] io scheduler mq-deadline registered [ 1.512816] io scheduler kyber registered [ 1.513311] xen: registering gsi 53 triggering 0 polarity 1 [ 1.513341] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.513627] xen: registering gsi 54 triggering 0 polarity 1 [ 1.513645] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.513980] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.514158] ACPI: button: Power Button [PWRB] [ 1.514301] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.514540] ACPI: button: Power Button [PWRF] [ 1.519219] xen:xen_evtchn: Event-channel device installed [ 1.519446] xen_pciback: backend is vpci [ 1.520285] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.520707] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.521516] hpet_acpi_add: no address or irqs in _CRS [ 1.521706] Non-volatile memory driver v1.3 [ 1.524346] loop: module loaded [ 1.530716] ahci 0000:00:11.0: version 3.0 [ 1.530853] xen: registering gsi 22 triggering 0 polarity 1 [ 1.530882] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.531017] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.531166] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.531276] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.532534] scsi host0: ahci [ 1.532880] scsi host1: ahci [ 1.533203] scsi host2: ahci [ 1.533599] scsi host3: ahci [ 1.533754] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 4 [ 1.533900] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 4 [ 1.534044] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 4 [ 1.534188] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 4 [ 1.534770] tun: Universal TUN/TAP device driver, 1.6 [ 1.535022] e100: Intel(R) PRO/100 Network Driver [ 1.535127] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.535246] sky2: driver version 1.30 [ 1.535398] xen_netfront: Initialising Xen virtual ethernet driver [ 1.535765] xen: registering gsi 16 triggering 0 polarity 1 [ 1.535772] Already setup the GSI :16 [ 1.535911] xen: registering gsi 17 triggering 0 polarity 1 [ 1.535917] Already setup the GSI :17 [ 1.535924] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.536207] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.536282] xen: registering gsi 19 triggering 0 polarity 1 [ 1.536385] Already setup the GSI :19 [ 1.536418] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.550969] Freeing initrd memory: 20940K [ 1.591712] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.591917] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.592057] usb usb1: Product: OHCI PCI host controller [ 1.592162] usb usb1: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.592266] usb usb1: SerialNumber: 0000:00:12.0 [ 1.592606] hub 1-0:1.0: USB hub found [ 1.592719] hub 1-0:1.0: 3 ports detected [ 1.593164] xen: registering gsi 16 triggering 0 polarity 1 [ 1.593172] Already setup the GSI :16 [ 1.593243] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.593526] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2 [ 1.593687] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.593857] ehci-pci 0000:00:12.2: debug port 1 [ 1.594064] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.599595] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.599770] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 1.599915] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.600055] usb usb2: Product: EHCI Host Controller [ 1.600163] usb usb2: Manufacturer: Linux 6.11.0+ ehci_hcd [ 1.600279] usb usb2: SerialNumber: 0000:00:12.2 [ 1.600570] hub 2-0:1.0: USB hub found [ 1.600682] hub 2-0:1.0: 6 ports detected [ 1.649650] hub 1-0:1.0: USB hub found [ 1.649769] hub 1-0:1.0: 3 ports detected [ 1.650090] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.650318] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 1.650490] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.650670] ehci-pci 0000:00:13.2: debug port 1 [ 1.650864] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 1.656620] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.656847] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 1.656995] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.657148] usb usb3: Product: EHCI Host Controller [ 1.657251] usb usb3: Manufacturer: Linux 6.11.0+ ehci_hcd [ 1.657356] usb usb3: SerialNumber: 0000:00:13.2 [ 1.657631] hub 3-0:1.0: USB hub found [ 1.657741] hub 3-0:1.0: 6 ports detected [ 1.658093] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.658384] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.658582] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 1.713743] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.713936] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.714102] usb usb4: Product: OHCI PCI host controller [ 1.714207] usb usb4: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.714312] usb usb4: SerialNumber: 0000:00:12.1 [ 1.714605] hub 4-0:1.0: USB hub found [ 1.714719] hub 4-0:1.0: 3 ports detected [ 1.715108] xen: registering gsi 18 triggering 0 polarity 1 [ 1.715114] Already setup the GSI :18 [ 1.715313] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.715513] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.715726] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 1.770771] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.770924] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.771064] usb usb5: Product: OHCI PCI host controller [ 1.771169] usb usb5: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.771274] usb usb5: SerialNumber: 0000:00:13.0 [ 1.771586] hub 5-0:1.0: USB hub found [ 1.771698] hub 5-0:1.0: 3 ports detected [ 1.772037] xen: registering gsi 18 triggering 0 polarity 1 [ 1.772043] Already setup the GSI :18 [ 1.772185] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.772395] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.772576] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 1.827680] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.827833] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.827973] usb usb6: Product: OHCI PCI host controller [ 1.828078] usb usb6: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.828182] usb usb6: SerialNumber: 0000:00:13.1 [ 1.828498] hub 6-0:1.0: USB hub found [ 1.828622] hub 6-0:1.0: 3 ports detected [ 1.828988] xen: registering gsi 18 triggering 0 polarity 1 [ 1.828994] Already setup the GSI :18 [ 1.829129] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.829340] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.829513] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 1.840670] ata4: SATA link down (SStatus 0 SControl 300) [ 1.840821] ata3: SATA link down (SStatus 0 SControl 300) [ 1.884709] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.884864] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.885030] usb usb7: Product: OHCI PCI host controller [ 1.885134] usb usb7: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.885239] usb usb7: SerialNumber: 0000:00:14.5 [ 1.885571] hub 7-0:1.0: USB hub found [ 1.885686] hub 7-0:1.0: 2 ports detected [ 1.885992] usbcore: registered new interface driver usblp [ 1.886121] usbcore: registered new interface driver usb-storage [ 1.886367] i8042: PNP: No PS/2 controller found. [ 1.886470] i8042: Probing ports directly. [ 1.889558] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.889667] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.889997] rtc_cmos 00:02: RTC can wake from S4 [ 1.890502] rtc_cmos 00:02: registered as rtc0 [ 1.890713] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 1.890863] device-mapper: uevent: version 1.0.3 [ 1.891055] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 1.891236] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.891396] hid: raw HID events driver (C) Jiri Kosina [ 1.891721] usbcore: registered new interface driver usbhid [ 1.891828] usbhid: USB HID core driver [ 1.892406] Initializing XFRM netlink socket [ 1.892524] NET: Registered PF_INET6 protocol family [ 1.893189] Segment Routing with IPv6 [ 1.893305] In-situ OAM (IOAM) with IPv6 [ 1.893441] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.893778] NET: Registered PF_PACKET protocol family [ 1.893912] 9pnet: Installing 9P2000 support [ 1.894032] Key type dns_resolver registered [ 1.894152] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.894769] IPI shorthand broadcast: enabled [ 1.899306] sched_clock: Marking stable (1873004067, 25541512)->(1904599589, -6054010) [ 1.899912] registered taskstats version 1 [ 1.900016] Loading compiled-in X.509 certificates [ 1.902121] PM: Magic number: 8:823:974 [ 1.902280] printk: legacy console [netcon0] enabled [ 1.902385] netconsole: network logging started [ 1.902734] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.912940] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.913334] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 1.915321] ALSA device list: [ 1.915419] No soundcards found. [ 1.916211] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 1.994613] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.994752] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.995274] ata2.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133 [ 1.995817] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.996430] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 1.996779] ata2.00: configured for UDMA/133 [ 1.996900] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.998702] ata1.00: configured for UDMA/133 [ 2.009062] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.009622] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.009687] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.009901] sd 0:0:0:0: [sda] Write Protect is off [ 2.010041] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.010074] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.010202] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5 [ 2.010368] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.010938] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.010963] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.011216] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 2.011345] sd 1:0:0:0: [sdb] Write Protect is off [ 2.011450] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.011473] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.011687] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 2.036080] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.049221] sdb: sdb1 sdb2 < sdb5 > [ 2.049633] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.051231] Freeing unused kernel image (initmem) memory: 2704K [ 2.051369] Write protecting the kernel read-only data: 24576k [ 2.063429] Freeing unused kernel image (rodata/data gap) memory: 1896K [ 2.143576] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.179403] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.179522] Run /init as init process [ 2.179632] with arguments: [ 2.179636] /init [ 2.179638] placeholder [ 2.179639] with environment: [ 2.179641] HOME=/ [ 2.179642] TERM=linux [ 2.305677] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.305840] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.305993] usb 6-2: Product: Hermon USB hidmouse Device [ 2.306099] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.312148] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.312463] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.316170] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.440339] e1000e: Intel(R) PRO/1000 Network Driver [ 2.440469] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.440761] xen: registering gsi 48 triggering 0 polarity 1 [ 2.440802] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.441029] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.479159] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.484615] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.527478] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e8:ac [ 2.527670] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.527870] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.528087] xen: registering gsi 47 triggering 0 polarity 1 [ 2.528120] xen: --> pirq=47 -> irq=47 (gsi=47) [ 2.528313] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.573635] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.595616] random: crng init done [ 2.619569] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e8:ad [ 2.619723] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.619913] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.622040] e1000e 0000:02:00.0 enx002590aee8ad: renamed from eth1 [ 2.622415] e1000e 0000:01:00.0 enx002590aee8ac: renamed from eth0 [ 3.286538] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.293606] EXT4-fs (dm-0): mounted filesystem c5c3f1ff-d434-47e4-a331-fd2ffb7f602d ro with ordered data mode. Quota mode: none. [ 6.898634] EXT4-fs (dm-0): re-mounted c5c3f1ff-d434-47e4-a331-fd2ffb7f602d r/w. Quota mode: none. [ 8.434971] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem [ 8.482685] EXT4-fs (sdb1): mounted filesystem 7cb4f60c-ccd0-401c-8458-e894ed6beb85 r/w with ordered data mode. Quota mode: none. [ 8.555857] Adding 1949692k swap on /dev/mapper/pinot0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 10.066722] xenbr0: port 1(enx002590aee8ac) entered blocking state [ 10.066861] xenbr0: port 1(enx002590aee8ac) entered disabled state [ 10.067018] e1000e 0000:01:00.0 enx002590aee8ac: entered allmulticast mode [ 10.067177] e1000e 0000:01:00.0 enx002590aee8ac: entered promiscuous mode [ 13.238596] e1000e 0000:01:00.0 enx002590aee8ac: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 13.239027] xenbr0: port 1(enx002590aee8ac) entered blocking state [ 13.239156] xenbr0: port 1(enx002590aee8ac) entered forwarding state