[ 0.000000] Linux version 6.11.0+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Mon Sep 23 06:31:23 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/pinot1--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000f6000000-0x00000000f6003fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SML/H8SML, BIOS 3.5 11/25/2013 [ 0.000000] DMI: Memory slots populated: 2/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000010] Xen PV: Detected 4 vCPUS [ 0.039084] tsc: Fast TSC calibration using PIT [ 0.039085] tsc: Detected 2799.876 MHz processor [ 0.039087] tsc: Detected 2799.976 MHz TSC [ 0.039308] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.039311] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.039317] last_pfn = 0xdfeb2 max_arch_pfn = 0x400000000 [ 0.039320] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.039322] MTRRs set to read-only [ 0.039325] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.065395] RAMDISK: [mem 0x04000000-0x05472fff] [ 0.065407] ACPI: Early table checksum verification disabled [ 0.066156] ACPI: RSDP 0x00000000000FA1C0 000024 (v02 ACPIAM) [ 0.066165] ACPI: XSDT 0x00000000DFEA0100 00007C (v01 SMCI 20131125 MSFT 00000097) [ 0.066190] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.066222] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20240827/tbfadt-560) [ 0.066233] ACPI: DSDT 0x00000000DFEA0600 00562B (v01 1CF11 1CF11000 00000000 INTL 20051117) [ 0.066242] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.066251] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.066260] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.066270] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.066280] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.066290] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.066300] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.066310] ACPI: SSDT 0x00000000DFEAA6F0 000B9C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.066319] ACPI: EINJ 0x00000000DFEAB290 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.066329] ACPI: BERT 0x00000000DFEAB420 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.066338] ACPI: ERST 0x00000000DFEAB450 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.066347] ACPI: HEST 0x00000000DFEAB660 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.066353] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.066354] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c2a] [ 0.066356] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.066357] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.066358] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.066360] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.066364] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.066365] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.066366] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.066367] ACPI: Reserving SSDT table memory at [mem 0xdfeaa6f0-0xdfeab28b] [ 0.066368] ACPI: Reserving EINJ table memory at [mem 0xdfeab290-0xdfeab3bf] [ 0.066370] ACPI: Reserving BERT table memory at [mem 0xdfeab420-0xdfeab44f] [ 0.066371] ACPI: Reserving ERST table memory at [mem 0xdfeab450-0xdfeab65f] [ 0.066372] ACPI: Reserving HEST table memory at [mem 0xdfeab660-0xdfeab707] [ 0.066460] APIC: Switched APIC routing to: Xen PV [ 0.068778] Zone ranges: [ 0.068779] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.068781] DMA32 [mem 0x0000000001000000-0x00000000dfeb1fff] [ 0.068783] Normal empty [ 0.068785] Movable zone start for each node [ 0.068785] Early memory node ranges [ 0.068786] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.068788] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.068790] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.068797] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.068857] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.071225] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.071230] p2m virtual area at (____ptrval____), size is 40000000 [ 0.291227] Remapped 102 page(s) [ 0.291229] Remapped 0 non-RAM page(s) [ 0.291738] ACPI: PM-Timer IO Port: 0x808 [ 0.291762] CPU topo: CPU limit of 4 reached. Ignoring further CPUs [ 0.291785] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.291789] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.291807] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.291815] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.291824] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.291827] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.291846] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.291849] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.291860] CPU topo: Max. logical packages: 1 [ 0.291861] CPU topo: Max. logical dies: 1 [ 0.291862] CPU topo: Max. dies per package: 1 [ 0.291867] CPU topo: Max. threads per core: 1 [ 0.291869] CPU topo: Num. cores per package: 4 [ 0.291869] CPU topo: Num. threads per package: 4 [ 0.291870] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.291871] CPU topo: Rejected CPUs 4 [ 0.291886] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.291888] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.291890] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.291892] PM: hibernation: Registered nosave memory: [mem 0x20066000-0xdfe9dfff] [ 0.291893] PM: hibernation: Registered nosave memory: [mem 0xdfe9e000-0xdfe9ffff] [ 0.291894] PM: hibernation: Registered nosave memory: [mem 0xdfea0000-0xdfeb1fff] [ 0.291896] [mem 0x20066000-0xdfe9dfff] available for PCI devices [ 0.291899] Booting kernel on Xen [ 0.291900] Xen version: 4.20-unstable (preserve-AD) [ 0.291903] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.298232] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.298786] percpu: Embedded 57 pages/cpu s194520 r8192 d30760 u524288 [ 0.298793] pcpu-alloc: s194520 r8192 d30760 u524288 alloc=1*2097152 [ 0.298797] pcpu-alloc: [0] 0 1 2 3 [ 0.298854] xen: PV spinlocks enabled [ 0.298857] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.298860] Kernel command line: placeholder root=/dev/mapper/pinot1--vg-root ro console=hvc0 [ 0.298915] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.299035] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.299092] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.299275] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.299278] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.299280] software IO TLB: area num 4. [ 0.379431] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.381941] Dynamic Preempt: voluntary [ 0.382039] rcu: Preemptible hierarchical RCU implementation. [ 0.382040] rcu: RCU event tracing is enabled. [ 0.382041] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.382043] Trampoline variant of Tasks RCU enabled. [ 0.382044] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.382045] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.382062] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.388852] NR_IRQS: 4352, nr_irqs: 1000, preallocated irqs: 16 [ 0.388978] xen:events: Using FIFO-based ABI [ 0.389000] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.389006] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.389011] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.389017] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.389021] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.389026] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.389031] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.389036] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.389041] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.389045] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.389050] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.389055] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.389060] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.389067] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.389072] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.389080] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.395129] Console: colour VGA+ 80x25 [ 0.395133] printk: legacy console [tty0] enabled [ 0.409174] printk: legacy console [hvc0] enabled [ 0.409843] ACPI: Core revision 20240827 [ 0.412412] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.412568] Xen: using vcpuop timer interface [ 0.412573] installing Xen timer for CPU 0 [ 0.412803] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c2a37069, max_idle_ns: 440795282549 ns [ 0.412960] Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.95 BogoMIPS (lpj=2799976) [ 0.413173] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.413364] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.413480] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.413593] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.413966] Spectre V2 : Mitigation: Retpolines [ 0.414069] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.414212] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.414321] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.414431] RETBleed: Mitigation: untrained return thunk [ 0.414550] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.414693] Speculative Store Bypass: Vulnerable [ 0.414810] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.414952] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.414962] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.415071] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.415180] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.437832] Freeing SMP alternatives memory: 40K [ 0.437952] pid_max: default: 32768 minimum: 301 [ 0.437986] LSM: initializing lsm=capability,selinux [ 0.438117] SELinux: Initializing. [ 0.438446] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.438615] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.440083] cpu 0 spinlock event irq 57 [ 0.440222] VPMU disabled by hypervisor. [ 0.440781] Performance Events: PMU not available due to virtualization, using software events only. [ 0.440944] signal: max sigframe size: 1776 [ 0.441021] rcu: Hierarchical SRCU implementation. [ 0.441125] rcu: Max phase no-delay instances is 400. [ 0.441332] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.450957] smp: Bringing up secondary CPUs ... [ 0.454018] installing Xen timer for CPU 1 [ 0.454474] installing Xen timer for CPU 2 [ 0.455974] installing Xen timer for CPU 3 [ 0.024874] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0011 [ 0.456181] cpu 1 spinlock event irq 77 [ 0.024874] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0012 [ 0.465026] cpu 2 spinlock event irq 78 [ 0.024874] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0013 [ 0.465306] cpu 3 spinlock event irq 79 [ 0.465306] smp: Brought up 1 node, 4 CPUs [ 0.466113] Memory: 381936K/524284K available (16384K kernel code, 2784K rwdata, 6296K rodata, 2704K init, 1736K bss, 138296K reserved, 0K cma-reserved) [ 0.466426] devtmpfs: initialized [ 0.466426] x86/mm: Memory block size: 128MB [ 0.467284] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.467284] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.467347] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.467590] PM: RTC time: 07:29:25, date: 2024-09-23 [ 0.468122] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.468259] xen:grant_table: Grant tables using version 1 layout [ 0.468381] Grant table initialized [ 0.468760] audit: initializing netlink subsys (disabled) [ 0.468985] audit: type=2000 audit(1727076566.226:1): state=initialized audit_enabled=0 res=1 [ 0.469200] thermal_sys: Registered thermal governor 'step_wise' [ 0.469200] thermal_sys: Registered thermal governor 'user_space' [ 0.469227] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.470125] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.549835] PCI: Using configuration type 1 for base access [ 0.550017] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.550191] ACPI: Added _OSI(Module Device) [ 0.550191] ACPI: Added _OSI(Processor Device) [ 0.550214] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.550968] ACPI: Added _OSI(Processor Aggregator Device) [ 0.555766] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.556319] xen: registering gsi 9 triggering 0 polarity 1 [ 0.557331] ACPI: Interpreter enabled [ 0.557452] ACPI: PM: (supports S0 S1 S4 S5) [ 0.557554] ACPI: Using IOAPIC for interrupt routing [ 0.557695] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.557963] PCI: Using E820 reservations for host bridge windows [ 0.558246] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.568172] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.568292] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.568443] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.568554] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.568696] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.569121] PCI host bridge to bus 0000:00 [ 0.569232] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.569345] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.569481] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.569622] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.569763] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.569904] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.570008] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.570584] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.571103] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.571323] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.571441] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.571562] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.571724] pci 0000:00:09.0: enabling Extended Tags [ 0.571975] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.572268] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.572482] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.572600] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.572713] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.572884] pci 0000:00:0a.0: enabling Extended Tags [ 0.573081] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.573396] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f conventional PCI endpoint [ 0.573584] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.573712] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.573840] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.573968] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.574096] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.574269] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.574434] pci 0000:00:11.0: set SATA to AHCI mode [ 0.574756] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.574944] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.575273] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.575466] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.575884] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.576005] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.576344] pci 0000:00:12.2: supports D1 D2 [ 0.576473] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.576740] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.576968] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.577359] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.577547] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.577962] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.578196] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.578530] pci 0000:00:13.2: supports D1 D2 [ 0.578631] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.578916] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.579338] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.579532] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.579660] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.579788] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.579915] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.579985] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.580145] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.580255] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.580364] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.580474] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.580773] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.581296] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.581527] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.581655] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.581775] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.582067] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.582305] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.582703] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.583063] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.583374] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.583713] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.584070] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.584380] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.584884] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.585013] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.585177] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.585310] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.585684] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.588005] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.588318] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.588512] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.588676] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.588809] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.589224] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.591008] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.591175] pci_bus 0000:03: extended config space not accessible [ 0.591343] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.592017] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.592167] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.592301] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.592538] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.592934] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.592983] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.593129] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.593291] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.593452] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.593599] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.593812] pci_bus 0000:00: on NUMA node 0 [ 0.594272] xen: registering gsi 13 triggering 1 polarity 0 [ 0.594723] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.594908] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.595030] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.595204] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.595380] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.595552] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.595750] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.595931] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.596062] xen:balloon: Initialising balloon driver [ 0.596182] iommu: Default domain type: Translated [ 0.596182] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.596325] SCSI subsystem initialized [ 0.596462] libata version 3.00 loaded. [ 0.596462] ACPI: bus type USB registered [ 0.596978] usbcore: registered new interface driver usbfs [ 0.597091] usbcore: registered new interface driver hub [ 0.597205] usbcore: registered new device driver usb [ 0.597367] pps_core: LinuxPPS API ver. 1 registered [ 0.597471] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.597621] PTP clock support registered [ 0.597746] Advanced Linux Sound Architecture Driver Initialized. [ 0.598217] NetLabel: Initializing [ 0.598317] NetLabel: domain hash size = 128 [ 0.598418] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.598542] NetLabel: unlabeled traffic allowed by default [ 0.598718] PCI: Using ACPI for IRQ routing [ 0.625572] PCI: pci_cache_line_size set to 64 bytes [ 0.625762] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.625765] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.625792] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.625792] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.625792] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.625962] vgaarb: loaded [ 0.626359] clocksource: Switched to clocksource tsc-early [ 0.626587] VFS: Disk quotas dquot_6.6.0 [ 0.626730] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.626887] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.626887] pnp: PnP ACPI init [ 0.627013] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.627258] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.627646] xen: registering gsi 8 triggering 1 polarity 0 [ 0.627646] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.628282] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.628404] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.628852] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.628979] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.629094] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.629209] system 00:05: [io 0x040b] has been reserved [ 0.629321] system 00:05: [io 0x04d6] has been reserved [ 0.629432] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.629547] system 00:05: [io 0x0c14] has been reserved [ 0.629699] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.629814] system 00:05: [io 0x0c52] has been reserved [ 0.629925] system 00:05: [io 0x0c6c] has been reserved [ 0.630071] system 00:05: [io 0x0c6f] has been reserved [ 0.630183] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.630298] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.630412] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.630526] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.630640] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.630754] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.630868] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.631029] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.631144] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.631283] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.631397] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.631512] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.631629] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.631746] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.632127] xen: registering gsi 4 triggering 1 polarity 0 [ 0.632132] Already setup the GSI :4 [ 0.632237] pnp 00:06: [dma 0 disabled] [ 0.632545] xen: registering gsi 3 triggering 1 polarity 0 [ 0.632556] pnp 00:07: [dma 0 disabled] [ 0.632718] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.633097] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.633296] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.633416] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.633535] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.633674] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.633971] pnp: PnP ACPI: found 10 devices [ 0.672684] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.672853] NET: Registered PF_INET protocol family [ 0.673027] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.673450] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.673611] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.673761] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.673917] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.674149] TCP: Hash tables configured (established 4096 bind 4096) [ 0.674303] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.674444] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.674603] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.674883] RPC: Registered named UNIX socket transport module. [ 0.675009] RPC: Registered udp transport module. [ 0.675117] RPC: Registered tcp transport module. [ 0.675251] RPC: Registered tcp-with-tls transport module. [ 0.675399] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.676031] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.676149] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.676274] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.676436] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.676550] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.676674] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.676826] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.676947] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.677083] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.677246] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.677362] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.677477] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.677620] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.677737] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.677855] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.677976] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.678092] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.678214] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.678330] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.678444] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.678561] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.678676] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.678791] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.678935] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.679061] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.679324] xen: registering gsi 16 triggering 0 polarity 1 [ 0.679350] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.341104] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 646335 usecs [ 1.341345] xen: registering gsi 16 triggering 0 polarity 1 [ 1.341353] Already setup the GSI :16 [ 1.364106] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 22286 usecs [ 1.364350] xen: registering gsi 17 triggering 0 polarity 1 [ 1.364394] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.364580] xen: registering gsi 18 triggering 0 polarity 1 [ 1.364601] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.387107] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 22053 usecs [ 1.387345] xen: registering gsi 18 triggering 0 polarity 1 [ 1.387353] Already setup the GSI :18 [ 1.410104] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 22284 usecs [ 1.410348] xen: registering gsi 19 triggering 0 polarity 1 [ 1.410389] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.410620] xen: registering gsi 18 triggering 0 polarity 1 [ 1.410624] Already setup the GSI :18 [ 1.433112] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 22019 usecs [ 1.433322] PCI: CLS 64 bytes, default 64 [ 1.433458] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.433574] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 1.433705] Unpacking initramfs... [ 1.433796] kvm_intel: VMX not supported by CPU 0 [ 1.433996] kvm_amd: SVM not supported by CPU 0 [ 1.434111] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c2a37069, max_idle_ns: 440795282549 ns [ 1.434846] clocksource: Switched to clocksource tsc [ 1.505960] Initialise system trusted keyrings [ 1.506268] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.506581] NFS: Registering the id_resolver key type [ 1.506694] Key type id_resolver registered [ 1.506794] Key type id_legacy registered [ 1.507002] 9p: Installing v9fs 9p2000 file system support [ 1.524406] Key type asymmetric registered [ 1.524510] Asymmetric key parser 'x509' registered [ 1.524628] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.524780] io scheduler mq-deadline registered [ 1.524895] io scheduler kyber registered [ 1.525386] xen: registering gsi 53 triggering 0 polarity 1 [ 1.525416] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.525680] xen: registering gsi 54 triggering 0 polarity 1 [ 1.525697] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.526032] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.526212] ACPI: button: Power Button [PWRB] [ 1.526354] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.526716] ACPI: button: Power Button [PWRF] [ 1.531466] xen:xen_evtchn: Event-channel device installed [ 1.531690] xen_pciback: backend is vpci [ 1.532583] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.533016] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.533827] hpet_acpi_add: no address or irqs in _CRS [ 1.534041] Non-volatile memory driver v1.3 [ 1.536730] loop: module loaded [ 1.543302] ahci 0000:00:11.0: version 3.0 [ 1.543400] xen: registering gsi 22 triggering 0 polarity 1 [ 1.543431] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.543562] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.543736] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.543845] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.545031] scsi host0: ahci [ 1.545394] scsi host1: ahci [ 1.545737] scsi host2: ahci [ 1.546130] scsi host3: ahci [ 1.546291] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 4 [ 1.546438] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 4 [ 1.546582] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 4 [ 1.546725] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 4 [ 1.547305] tun: Universal TUN/TAP device driver, 1.6 [ 1.547536] e100: Intel(R) PRO/100 Network Driver [ 1.547640] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.547758] sky2: driver version 1.30 [ 1.547924] xen_netfront: Initialising Xen virtual ethernet driver [ 1.548292] xen: registering gsi 16 triggering 0 polarity 1 [ 1.548299] Already setup the GSI :16 [ 1.548455] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.548680] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.548888] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.550828] xen: registering gsi 19 triggering 0 polarity 1 [ 1.550836] Already setup the GSI :19 [ 1.550867] xen: registering gsi 17 triggering 0 polarity 1 [ 1.550965] Already setup the GSI :17 [ 1.586415] Freeing initrd memory: 20940K [ 1.604060] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.604213] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.604354] usb usb1: Product: OHCI PCI host controller [ 1.604459] usb usb1: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.604564] usb usb1: SerialNumber: 0000:00:12.0 [ 1.604920] hub 1-0:1.0: USB hub found [ 1.605034] hub 1-0:1.0: 3 ports detected [ 1.605325] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.605451] xen: registering gsi 16 triggering 0 polarity 1 [ 1.605460] Already setup the GSI :16 [ 1.605570] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.605720] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.605902] ehci-pci 0000:00:13.2: debug port 1 [ 1.606139] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 1.611956] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.612152] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 1.612337] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.612477] usb usb2: Product: EHCI Host Controller [ 1.612580] usb usb2: Manufacturer: Linux 6.11.0+ ehci_hcd [ 1.612686] usb usb2: SerialNumber: 0000:00:13.2 [ 1.612962] hub 2-0:1.0: USB hub found [ 1.613074] hub 2-0:1.0: 6 ports detected [ 1.668088] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.668317] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3 [ 1.668462] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.668628] ehci-pci 0000:00:12.2: debug port 1 [ 1.668828] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.674911] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.675087] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 1.675233] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.675373] usb usb3: Product: EHCI Host Controller [ 1.675476] usb usb3: Manufacturer: Linux 6.11.0+ ehci_hcd [ 1.675581] usb usb3: SerialNumber: 0000:00:12.2 [ 1.675900] hub 3-0:1.0: USB hub found [ 1.676019] hub 3-0:1.0: 6 ports detected [ 1.724964] hub 1-0:1.0: USB hub found [ 1.725083] hub 1-0:1.0: 3 ports detected [ 1.725320] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.725548] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.725730] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 1.780059] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.780223] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.780369] usb usb4: Product: OHCI PCI host controller [ 1.780474] usb usb4: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.780580] usb usb4: SerialNumber: 0000:00:12.1 [ 1.780890] hub 4-0:1.0: USB hub found [ 1.781010] hub 4-0:1.0: 3 ports detected [ 1.781348] xen: registering gsi 18 triggering 0 polarity 1 [ 1.781354] Already setup the GSI :18 [ 1.781528] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.781741] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.781973] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 1.837022] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.837173] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.837313] usb usb5: Product: OHCI PCI host controller [ 1.837418] usb usb5: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.837523] usb usb5: SerialNumber: 0000:00:13.0 [ 1.837794] hub 5-0:1.0: USB hub found [ 1.837925] hub 5-0:1.0: 3 ports detected [ 1.838290] xen: registering gsi 18 triggering 0 polarity 1 [ 1.838295] Already setup the GSI :18 [ 1.838453] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.838636] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.838812] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 1.850960] ata3: SATA link down (SStatus 0 SControl 300) [ 1.851111] ata4: SATA link down (SStatus 0 SControl 300) [ 1.894003] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.894155] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.894321] usb usb6: Product: OHCI PCI host controller [ 1.894425] usb usb6: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.894531] usb usb6: SerialNumber: 0000:00:13.1 [ 1.894815] hub 6-0:1.0: USB hub found [ 1.894948] hub 6-0:1.0: 3 ports detected [ 1.895355] xen: registering gsi 18 triggering 0 polarity 1 [ 1.895361] Already setup the GSI :18 [ 1.895521] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.895730] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.895912] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 1.951015] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.951166] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.951306] usb usb7: Product: OHCI PCI host controller [ 1.951411] usb usb7: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.951515] usb usb7: SerialNumber: 0000:00:14.5 [ 1.951787] hub 7-0:1.0: USB hub found [ 1.951919] hub 7-0:1.0: 2 ports detected [ 1.952373] usbcore: registered new interface driver usblp [ 1.952504] usbcore: registered new interface driver usb-storage [ 1.952728] i8042: PNP: No PS/2 controller found. [ 1.952832] i8042: Probing ports directly. [ 1.956127] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.956241] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.956581] rtc_cmos 00:02: RTC can wake from S4 [ 1.957128] rtc_cmos 00:02: registered as rtc0 [ 1.957275] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 1.957429] device-mapper: uevent: version 1.0.3 [ 1.957669] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 1.957849] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.958073] hid: raw HID events driver (C) Jiri Kosina [ 1.958390] usbcore: registered new interface driver usbhid [ 1.958496] usbhid: USB HID core driver [ 1.959115] Initializing XFRM netlink socket [ 1.959233] NET: Registered PF_INET6 protocol family [ 1.959741] Segment Routing with IPv6 [ 1.959855] In-situ OAM (IOAM) with IPv6 [ 1.960003] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.960259] NET: Registered PF_PACKET protocol family [ 1.960393] 9pnet: Installing 9P2000 support [ 1.960510] Key type dns_resolver registered [ 1.960625] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.961103] IPI shorthand broadcast: enabled [ 1.965657] sched_clock: Marking stable (1941003722, 23874182)->(1971563950, -6686046) [ 1.966171] registered taskstats version 1 [ 1.966275] Loading compiled-in X.509 certificates [ 1.968507] PM: Magic number: 8:414:471 [ 1.968682] printk: legacy console [netcon0] enabled [ 1.968787] netconsole: network logging started [ 1.969085] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.979261] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.979650] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 1.981667] ALSA device list: [ 1.981780] No soundcards found. [ 1.982587] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 2.004935] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.005077] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.005704] ata2.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133 [ 2.006203] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.006979] ata2.00: configured for UDMA/133 [ 2.007299] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 2.007807] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.009548] ata1.00: configured for UDMA/133 [ 2.019906] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.020502] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.020502] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.020523] sd 0:0:0:0: [sda] Write Protect is off [ 2.020893] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.020903] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5 [ 2.020922] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.021264] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.021505] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.021574] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.021788] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 2.021928] sd 1:0:0:0: [sdb] Write Protect is off [ 2.022043] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.022069] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.022275] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 2.059138] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.061634] sdb: sdb1 sdb2 < sdb5 > [ 2.062040] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.063585] Freeing unused kernel image (initmem) memory: 2704K [ 2.063718] Write protecting the kernel read-only data: 24576k [ 2.076024] Freeing unused kernel image (rodata/data gap) memory: 1896K [ 2.137912] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.193169] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.193357] Run /init as init process [ 2.193465] with arguments: [ 2.193467] /init [ 2.193468] placeholder [ 2.193470] with environment: [ 2.193471] HOME=/ [ 2.193473] TERM=linux [ 2.296994] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.297154] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.297268] usb 6-2: Product: Hermon USB hidmouse Device [ 2.297380] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.303451] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.303808] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.307557] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.452495] e1000e: Intel(R) PRO/1000 Network Driver [ 2.452665] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.452925] xen: registering gsi 48 triggering 0 polarity 1 [ 2.452966] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.453205] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.483092] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.504723] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.547779] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e9:2a [ 2.547974] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.548173] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.548436] xen: registering gsi 47 triggering 0 polarity 1 [ 2.548465] xen: --> pirq=47 -> irq=47 (gsi=47) [ 2.548688] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.594887] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.595905] random: crng init done [ 2.638897] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e9:2b [ 2.639052] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.639242] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.641353] e1000e 0000:01:00.0 enx002590aee92a: renamed from eth0 [ 2.641829] e1000e 0000:02:00.0 enx002590aee92b: renamed from eth1 [ 3.342542] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.354918] EXT4-fs (dm-0): mounted filesystem 5d7b2a20-e30b-4de4-a409-0d06c7b8cd1a ro with ordered data mode. Quota mode: none. [ 7.201126] EXT4-fs (dm-0): re-mounted 5d7b2a20-e30b-4de4-a409-0d06c7b8cd1a r/w. Quota mode: none. [ 8.538668] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem [ 8.550646] EXT4-fs (sdb1): mounted filesystem 497feaf9-c918-4013-9f1a-c6d05f99fa03 r/w with ordered data mode. Quota mode: none. [ 8.627205] Adding 1949692k swap on /dev/mapper/pinot1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 10.150956] xenbr0: port 1(enx002590aee92a) entered blocking state [ 10.151137] xenbr0: port 1(enx002590aee92a) entered disabled state [ 10.151256] e1000e 0000:01:00.0 enx002590aee92a: entered allmulticast mode [ 10.151414] e1000e 0000:01:00.0 enx002590aee92a: entered promiscuous mode [ 13.395949] e1000e 0000:01:00.0 enx002590aee92a: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 13.396332] xenbr0: port 1(enx002590aee92a) entered blocking state [ 13.396466] xenbr0: port 1(enx002590aee92a) entered forwarding state