[ 0.000000] Linux version 6.1.111+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Mon Sep 23 21:19:09 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000460] tsc: Detected 2200.000 MHz processor [ 0.000897] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000901] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000908] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000909] Disabled [ 0.000910] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000914] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000953] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027888] RAMDISK: [mem 0x04000000-0x05423fff] [ 0.027896] ACPI: Early table checksum verification disabled [ 0.028495] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028507] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028544] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028592] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028608] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028624] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028640] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028656] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028674] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028691] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028707] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028723] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028739] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028756] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028772] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028788] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028804] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028820] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028836] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028852] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028868] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028884] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028892] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028894] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028895] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028896] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028897] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028898] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028899] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028900] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028901] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028902] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028903] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028904] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028905] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028906] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028907] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028908] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028909] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028910] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028911] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028912] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028957] Setting APIC routing to Xen PV. [ 0.032902] Zone ranges: [ 0.032903] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032905] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032907] Normal empty [ 0.032908] Movable zone start for each node [ 0.032909] Early memory node ranges [ 0.032910] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032911] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032913] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032918] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032954] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034519] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034524] p2m virtual area at (____ptrval____), size is 40000000 [ 0.222158] Remapped 102 page(s) [ 0.223536] ACPI: PM-Timer IO Port: 0x408 [ 0.223589] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223592] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223594] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223595] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223596] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223598] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223600] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223601] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223629] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223642] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223646] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223672] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223676] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223746] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223760] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223763] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223764] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223766] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223770] Booting kernel on Xen [ 0.223771] Xen version: 4.20-unstable (preserve-AD) [ 0.223774] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.230039] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.230324] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.230331] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.230334] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230414] xen: PV spinlocks enabled [ 0.230418] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230423] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230425] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230462] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230472] random: crng init done [ 0.230521] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230546] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231863] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231866] software IO TLB: area num 8. [ 0.291384] Memory: 389292K/524284K available (14349K kernel code, 2686K rwdata, 4584K rodata, 1580K init, 1288K bss, 134740K reserved, 0K cma-reserved) [ 0.291555] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.294053] Dynamic Preempt: voluntary [ 0.294153] rcu: Preemptible hierarchical RCU implementation. [ 0.294154] rcu: RCU event tracing is enabled. [ 0.294155] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.294157] Trampoline variant of Tasks RCU enabled. [ 0.294158] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.294159] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.304681] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.304804] xen:events: Using FIFO-based ABI [ 0.304828] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.304838] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.304846] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.304853] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.304861] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.304868] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.304876] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.304883] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.304890] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.304898] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.304906] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.304913] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.304921] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.304928] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.304936] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.304947] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.310334] Console: colour VGA+ 80x25 [ 0.325174] printk: console [tty0] enabled [ 0.326505] printk: console [hvc0] enabled [ 0.326643] ACPI: Core revision 20220331 [ 0.342147] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.342312] Xen: using vcpuop timer interface [ 0.342320] installing Xen timer for CPU 0 [ 0.342469] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb633008a4, max_idle_ns: 440795292230 ns [ 0.342629] Calibrating delay loop (skipped), value calculated using timer frequency.. 4400.00 BogoMIPS (lpj=2200000) [ 0.342957] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.343074] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.343205] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.343355] Spectre V2 : Mitigation: Retpolines [ 0.343636] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.343783] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.343903] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.344025] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.344173] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.344292] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.344445] MDS: Mitigation: Clear CPU buffers [ 0.344558] TAA: Mitigation: Clear CPU buffers [ 0.344633] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.344800] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.344950] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.345085] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.345205] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.345326] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.363059] Freeing SMP alternatives memory: 40K [ 0.363186] pid_max: default: 32768 minimum: 301 [ 0.363651] LSM: Security Framework initializing [ 0.363774] SELinux: Initializing. [ 0.363919] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364067] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364720] cpu 0 spinlock event irq 25 [ 0.364840] VPMU disabled by hypervisor. [ 0.365278] cblist_init_generic: Setting adjustable number of callback queues. [ 0.365426] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.365583] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.365634] signal: max sigframe size: 1776 [ 0.365797] rcu: Hierarchical SRCU implementation. [ 0.365923] rcu: Max phase no-delay instances is 400. [ 0.366412] smp: Bringing up secondary CPUs ... [ 0.366748] installing Xen timer for CPU 1 [ 0.367342] cpu 1 spinlock event irq 35 [ 0.367779] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.367951] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.368148] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.368856] installing Xen timer for CPU 2 [ 0.369306] cpu 2 spinlock event irq 41 [ 0.369712] installing Xen timer for CPU 3 [ 0.370246] cpu 3 spinlock event irq 47 [ 0.370634] installing Xen timer for CPU 4 [ 0.371087] cpu 4 spinlock event irq 53 [ 0.371087] installing Xen timer for CPU 5 [ 0.371964] cpu 5 spinlock event irq 59 [ 0.371964] installing Xen timer for CPU 6 [ 0.372838] cpu 6 spinlock event irq 65 [ 0.372880] installing Xen timer for CPU 7 [ 0.373659] cpu 7 spinlock event irq 71 [ 0.373862] smp: Brought up 1 node, 8 CPUs [ 0.373994] smpboot: Max logical packages: 1 [ 0.374220] devtmpfs: initialized [ 0.374682] x86/mm: Memory block size: 128MB [ 0.375049] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.375049] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.375081] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.375765] PM: RTC time: 22:04:57, date: 2024-09-23 [ 0.376029] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.376186] xen:grant_table: Grant tables using version 1 layout [ 0.376326] Grant table initialized [ 0.376682] audit: initializing netlink subsys (disabled) [ 0.376834] audit: type=2000 audit(1727129097.510:1): state=initialized audit_enabled=0 res=1 [ 0.376834] thermal_sys: Registered thermal governor 'step_wise' [ 0.376834] thermal_sys: Registered thermal governor 'user_space' [ 0.376838] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.377819] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.377976] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.506610] PCI: Using configuration type 1 for base access [ 0.509167] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.509710] ACPI: Added _OSI(Module Device) [ 0.509849] ACPI: Added _OSI(Processor Device) [ 0.509980] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.510638] ACPI: Added _OSI(Processor Aggregator Device) [ 0.554832] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.558264] xen: registering gsi 9 triggering 0 polarity 0 [ 0.563149] ACPI: Dynamic OEM Table Load: [ 0.571596] ACPI: Interpreter enabled [ 0.571650] ACPI: PM: (supports S0 S4 S5) [ 0.571765] ACPI: Using IOAPIC for interrupt routing [ 0.571915] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.572066] PCI: Using E820 reservations for host bridge windows [ 0.572733] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.611350] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.611500] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.611764] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.612121] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.612261] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.612469] PCI host bridge to bus 0000:ff [ 0.612626] pci_bus 0000:ff: root bus resource [bus ff] [ 0.612866] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.613422] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.613949] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.614478] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.615032] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.615586] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.616023] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.616564] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.617056] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.617600] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.618043] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.618569] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.619041] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.619572] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.620038] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.620586] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.621020] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.621552] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.621816] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.622390] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.623009] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.623595] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.624078] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.624681] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.625265] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.625858] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.626389] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.626955] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.627538] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.628079] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.628696] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.629271] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.629828] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.630361] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.630893] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.631455] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.632042] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.632651] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.633240] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.633910] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.634439] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.634971] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.635532] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.635808] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.636354] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.636911] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.637438] pci_bus 0000:ff: on NUMA node 0 [ 0.643385] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.643538] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.643824] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.644301] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.644440] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.645150] PCI host bridge to bus 0000:00 [ 0.645283] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.645424] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.645564] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.645633] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.645799] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.646015] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.646838] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.647478] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.647973] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.648610] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.649996] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.649996] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.650096] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.650627] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.650627] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.651925] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.652402] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.653067] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.653551] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.654215] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.655025] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.655875] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.656134] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.656693] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.657142] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.657401] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.657959] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.658347] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.658625] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.659187] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.659646] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.659906] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.660550] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.660907] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.661594] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.661732] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.661874] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.669876] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.670566] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.670729] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.670871] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.671255] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.671955] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.672190] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.672331] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.672712] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.673408] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.673646] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.673787] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.674212] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.674446] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.675119] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.675530] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.676456] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.676690] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.676876] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.677061] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.677247] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.677460] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.677649] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.678028] pci 0000:00:1f.2: PME# supported from D3hot [ 0.678397] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.678660] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.678975] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.679460] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.679718] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.680644] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.681008] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.681433] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.681689] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.682642] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.682921] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.683817] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.684069] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.684986] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.685240] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.686140] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.686298] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.686728] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.687003] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.687340] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.687553] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.687920] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.688186] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.688355] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.688591] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.688633] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.689351] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.689627] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.689967] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.690185] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.690610] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.690736] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.690911] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.691149] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.691289] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.691985] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.692170] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.692333] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.692684] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.693048] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.693490] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.693634] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.693877] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.694131] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.694323] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.694970] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.695536] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.695646] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.695796] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.696253] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.696391] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.696633] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.696887] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.697080] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.697731] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.698295] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.698442] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.698592] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.698920] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.699386] pci 0000:09:00.0: enabling Extended Tags [ 0.699794] pci 0000:09:00.0: supports D1 D2 [ 0.699926] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.700376] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.700524] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.700646] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.701008] pci_bus 0000:0a: extended config space not accessible [ 0.701213] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.701454] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.701673] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.701873] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.702291] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.702633] pci 0000:0a:00.0: supports D1 D2 [ 0.702765] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.703333] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.703495] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.703647] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.704119] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.704376] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.704623] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.704810] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.705424] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.705731] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.705898] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.706149] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.706313] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.706982] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.707247] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.707493] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.707688] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.708297] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.708594] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.708633] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.708885] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.709051] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.709697] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.709935] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.710181] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.710370] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.710979] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.711273] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.711439] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.711693] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.711858] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.712495] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.712731] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.712977] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.713166] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.713798] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.714066] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.714231] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.714484] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.714633] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.715361] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.715514] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.715646] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.715810] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.716375] pci_bus 0000:00: on NUMA node 0 [ 0.716517] xen: registering gsi 13 triggering 1 polarity 0 [ 0.716627] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.716627] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.716627] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.717702] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.717938] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.718075] ACPI: PCI: Interrupt link LNKE disabled [ 0.718312] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.718454] ACPI: PCI: Interrupt link LNKF disabled [ 0.718689] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.718827] ACPI: PCI: Interrupt link LNKG disabled [ 0.719056] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.719193] ACPI: PCI: Interrupt link LNKH disabled [ 0.719544] xen:balloon: Initialising balloon driver [ 0.720773] iommu: Default domain type: Translated [ 0.727635] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.727859] SCSI subsystem initialized [ 0.728665] libata version 3.00 loaded. [ 0.728674] ACPI: bus type USB registered [ 0.728803] usbcore: registered new interface driver usbfs [ 0.728925] usbcore: registered new interface driver hub [ 0.729047] usbcore: registered new device driver usb [ 0.729175] pps_core: LinuxPPS API ver. 1 registered [ 0.729175] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.729175] PTP clock support registered [ 0.729678] Advanced Linux Sound Architecture Driver Initialized. [ 0.729930] NetLabel: Initializing [ 0.730042] NetLabel: domain hash size = 128 [ 0.730155] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.730155] NetLabel: unlabeled traffic allowed by default [ 0.730674] PCI: Using ACPI for IRQ routing [ 0.766194] PCI: pci_cache_line_size set to 64 bytes [ 0.766984] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.766988] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.767671] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.767809] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.767930] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.768080] vgaarb: loaded [ 0.769635] clocksource: Switched to clocksource tsc-early [ 0.777993] VFS: Disk quotas dquot_6.6.0 [ 0.778128] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.778274] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.778433] pnp: PnP ACPI init [ 0.778954] xen: registering gsi 8 triggering 1 polarity 0 [ 0.779118] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.779244] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.779363] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.779482] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.779601] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.779742] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.779865] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.779986] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.780107] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.780227] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.780348] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.780475] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.780595] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.781015] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.781139] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.781258] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.781376] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.781495] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.781920] xen: registering gsi 4 triggering 1 polarity 0 [ 0.781924] Already setup the GSI :4 [ 0.782037] pnp 00:03: [dma 0 disabled] [ 0.782347] xen: registering gsi 3 triggering 1 polarity 0 [ 0.782358] pnp 00:04: [dma 0 disabled] [ 0.782948] pnp: PnP ACPI: found 5 devices [ 0.814124] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.814277] NET: Registered PF_INET protocol family [ 0.814438] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.814823] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.814976] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.815128] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.815279] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.815449] TCP: Hash tables configured (established 4096 bind 4096) [ 0.815591] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.815752] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.815929] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.816297] RPC: Registered named UNIX socket transport module. [ 0.816424] RPC: Registered udp transport module. [ 0.816545] RPC: Registered tcp transport module. [ 0.816687] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.817216] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.817387] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.817552] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.817733] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.817889] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.818064] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.818238] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.818372] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.818535] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.818673] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.818819] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.818964] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.819110] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.819239] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.819393] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.819538] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.819709] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.819834] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.819979] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.820123] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.820272] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.820395] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.820540] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.820711] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.820860] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.820996] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.821130] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.821301] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.821475] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.821670] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.821800] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.821941] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.822110] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.822230] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.822369] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.822531] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.822677] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.822822] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.822988] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.823109] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.823248] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.823417] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.823575] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.823738] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.823892] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.824046] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.824199] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.824353] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.824507] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.824674] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.824803] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.824943] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.825077] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.825251] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.825401] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.825521] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.825653] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.825775] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.825896] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.826016] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.826135] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.826314] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.826430] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.826549] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.826679] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.826799] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.826916] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.827035] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.827152] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.827271] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.827387] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.827506] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.828058] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.828278] xen: registering gsi 19 triggering 0 polarity 1 [ 0.828303] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.837136] xen: registering gsi 18 triggering 0 polarity 1 [ 0.837159] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.852875] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 15423 usecs [ 0.853119] xen: registering gsi 18 triggering 0 polarity 1 [ 0.853125] Already setup the GSI :18 [ 0.869872] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 16414 usecs [ 0.870083] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.870258] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.870342] Unpacking initramfs... [ 0.870394] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.870853] kvm: no hardware support for 'kvm_intel' [ 0.879033] has_svm: not amd or hygon [ 0.879196] kvm: no hardware support for 'kvm_amd' [ 0.879357] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb633008a4, max_idle_ns: 440795292230 ns [ 0.880578] clocksource: Switched to clocksource tsc [ 0.883622] Initialise system trusted keyrings [ 0.883934] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.886402] NFS: Registering the id_resolver key type [ 0.886553] Key type id_resolver registered [ 0.886703] Key type id_legacy registered [ 0.886927] 9p: Installing v9fs 9p2000 file system support [ 0.902377] Key type asymmetric registered [ 0.902528] Asymmetric key parser 'x509' registered [ 0.902738] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.902929] io scheduler mq-deadline registered [ 0.903062] io scheduler kyber registered [ 0.904129] xen: registering gsi 16 triggering 0 polarity 1 [ 0.904165] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.904922] xen: registering gsi 16 triggering 0 polarity 1 [ 0.904931] Already setup the GSI :16 [ 0.905756] xen: registering gsi 16 triggering 0 polarity 1 [ 0.905764] Already setup the GSI :16 [ 0.906188] xen: registering gsi 16 triggering 0 polarity 1 [ 0.906195] Already setup the GSI :16 [ 0.906616] xen: registering gsi 16 triggering 0 polarity 1 [ 0.906623] Already setup the GSI :16 [ 0.907425] xen: registering gsi 16 triggering 0 polarity 1 [ 0.907434] Already setup the GSI :16 [ 0.908195] xen: registering gsi 16 triggering 0 polarity 1 [ 0.908204] Already setup the GSI :16 [ 0.908823] xen: registering gsi 17 triggering 0 polarity 1 [ 0.908851] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.909302] xen: registering gsi 19 triggering 0 polarity 1 [ 0.909309] Already setup the GSI :19 [ 0.909910] xen: registering gsi 16 triggering 0 polarity 1 [ 0.909917] Already setup the GSI :16 [ 0.910866] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.911100] ACPI: button: Power Button [PWRB] [ 0.911291] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.911626] ACPI: button: Power Button [PWRF] [ 0.911939] Monitor-Mwait will be used to enter C-1 state [ 0.911979] Monitor-Mwait will be used to enter C-2 state [ 0.911997] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.912459] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.912939] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.913480] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.913893] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.914397] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.914753] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.915133] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.915963] xen:xen_evtchn: Event-channel device installed [ 0.916165] xen_pciback: backend is vpci [ 0.917038] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.917523] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.918562] hpet_acpi_add: no address or irqs in _CRS [ 0.918811] Non-volatile memory driver v1.3 [ 0.918926] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.921669] loop: module loaded [ 0.928393] ahci 0000:00:1f.2: version 3.0 [ 0.928495] xen: registering gsi 16 triggering 0 polarity 1 [ 0.928504] Already setup the GSI :16 [ 0.928851] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.929003] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.944411] scsi host0: ahci [ 0.944840] scsi host1: ahci [ 0.945209] scsi host2: ahci [ 0.945772] scsi host3: ahci [ 0.946152] scsi host4: ahci [ 0.946471] scsi host5: ahci [ 0.946620] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 0.946784] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 0.946930] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 0.947082] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 0.947228] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 0.947373] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 0.947867] tun: Universal TUN/TAP device driver, 1.6 [ 0.948131] e100: Intel(R) PRO/100 Network Driver [ 0.948265] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.948409] sky2: driver version 1.30 [ 0.948603] xen_netfront: Initialising Xen virtual ethernet driver [ 0.948976] xen: registering gsi 18 triggering 0 polarity 1 [ 0.948986] Already setup the GSI :18 [ 0.949195] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.949395] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.949576] ehci-pci 0000:00:1a.0: debug port 2 [ 0.953751] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.960748] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.960979] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.961129] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.961273] usb usb1: Product: EHCI Host Controller [ 0.961389] usb usb1: Manufacturer: Linux 6.1.111+ ehci_hcd [ 0.961505] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.961817] hub 1-0:1.0: USB hub found [ 0.961949] hub 1-0:1.0: 2 ports detected [ 0.962323] xen: registering gsi 18 triggering 0 polarity 1 [ 0.962333] Already setup the GSI :18 [ 0.962524] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.962775] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.962956] ehci-pci 0000:00:1d.0: debug port 2 [ 0.967044] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.973743] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.973966] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.974115] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.974260] usb usb2: Product: EHCI Host Controller [ 0.974375] usb usb2: Manufacturer: Linux 6.1.111+ ehci_hcd [ 0.974491] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.974780] hub 2-0:1.0: USB hub found [ 0.974931] hub 2-0:1.0: 2 ports detected [ 0.975376] xen: registering gsi 19 triggering 0 polarity 1 [ 0.975385] Already setup the GSI :19 [ 0.975590] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.975809] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.977029] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.977509] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.977736] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.977887] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.978094] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.978243] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.978387] usb usb3: Product: xHCI Host Controller [ 0.978502] usb usb3: Manufacturer: Linux 6.1.111+ xhci-hcd [ 0.978619] usb usb3: SerialNumber: 0000:00:14.0 [ 0.978965] hub 3-0:1.0: USB hub found [ 0.979100] hub 3-0:1.0: 8 ports detected [ 0.980246] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.980405] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.980550] usb usb4: Product: xHCI Host Controller [ 0.980664] usb usb4: Manufacturer: Linux 6.1.111+ xhci-hcd [ 0.980804] usb usb4: SerialNumber: 0000:00:14.0 [ 0.981090] hub 4-0:1.0: USB hub found [ 0.981224] hub 4-0:1.0: 6 ports detected [ 0.982344] usbcore: registered new interface driver usblp [ 0.982479] usbcore: registered new interface driver usb-storage [ 0.982722] i8042: PNP: No PS/2 controller found. [ 0.983041] rtc_cmos 00:00: RTC can wake from S4 [ 0.983697] rtc_cmos 00:00: registered as rtc0 [ 0.983931] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.984142] device-mapper: uevent: version 1.0.3 [ 0.984368] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.984369] xen: registering gsi 18 triggering 0 polarity 1 [ 0.984384] intel_pstate: CPU model not supported [ 0.984536] Already setup the GSI :18 [ 0.984655] hid: raw HID events driver (C) Jiri Kosina [ 0.984808] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.985061] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.985130] usbcore: registered new interface driver usbhid [ 0.985316] usbhid: USB HID core driver [ 0.985612] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.986168] Initializing XFRM netlink socket [ 0.986406] NET: Registered PF_INET6 protocol family [ 0.986960] Segment Routing with IPv6 [ 0.987080] In-situ OAM (IOAM) with IPv6 [ 0.987222] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.987490] NET: Registered PF_PACKET protocol family [ 0.987643] 9pnet: Installing 9P2000 support [ 0.987786] Key type dns_resolver registered [ 0.988814] IPI shorthand broadcast: enabled [ 0.988956] sched_clock: Marking stable (951088271, 37678160)->(1839226592, -850460161) [ 0.989549] registered taskstats version 1 [ 0.989670] Loading compiled-in X.509 certificates [ 0.992809] PM: Magic number: 8:595:98 [ 0.993151] printk: console [netcon0] enabled [ 0.993303] netconsole: network logging started [ 0.993872] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.998847] Freeing initrd memory: 20624K [ 1.010816] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.011180] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 1.011778] ALSA device list: [ 1.011886] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 1.011943] No soundcards found. [ 1.200761] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.216801] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.216956] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.253559] ata6: SATA link down (SStatus 0 SControl 300) [ 1.253864] ata5: SATA link down (SStatus 0 SControl 300) [ 1.254021] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.254164] ata4: SATA link down (SStatus 0 SControl 300) [ 1.254305] ata2: SATA link down (SStatus 0 SControl 300) [ 1.254451] ata1: SATA link down (SStatus 0 SControl 300) [ 1.255183] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.337372] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.337570] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.337997] hub 1-1:1.0: USB hub found [ 1.338196] hub 1-1:1.0: 4 ports detected [ 1.341547] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.341677] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.344190] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.344468] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.344663] usb 3-3: Product: USB2.0 Hub [ 1.345228] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.345381] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.345759] hub 2-1:1.0: USB hub found [ 1.345942] hub 2-1:1.0: 4 ports detected [ 1.346087] hub 3-3:1.0: USB hub found [ 1.346502] hub 3-3:1.0: 4 ports detected [ 1.369435] ata3.00: configured for UDMA/133 [ 1.369872] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.370436] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.370568] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.370798] sd 2:0:0:0: [sda] Write Protect is off [ 1.370920] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.370987] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.371221] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.390470] sda: sda1 sda2 < sda5 > [ 1.390920] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.392182] Freeing unused kernel image (initmem) memory: 1580K [ 1.392309] Write protecting the kernel read-only data: 22528k [ 1.411004] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.412332] Freeing unused kernel image (rodata/data gap) memory: 1560K [ 1.462725] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.588989] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.589149] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.589793] hub 3-4:1.0: USB hub found [ 1.590001] hub 3-4:1.0: 4 ports detected [ 1.652742] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.730096] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.730252] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.730399] usb 3-3.2: Product: USB2.0 Hub [ 1.731029] hub 3-3.2:1.0: USB hub found [ 1.731439] hub 3-3.2:1.0: 4 ports detected [ 1.882722] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.885597] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.885736] Run /init as init process [ 1.885886] with arguments: [ 1.885887] /init [ 1.885888] placeholder [ 1.885889] with environment: [ 1.885890] HOME=/ [ 1.885891] TERM=linux [ 1.986981] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.987191] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.993369] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 2.343075] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 2.343922] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.344082] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.344435] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.344652] xen: registering gsi 16 triggering 0 polarity 1 [ 2.344660] Already setup the GSI :16 [ 2.347858] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.347982] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.348173] xen: registering gsi 16 triggering 0 polarity 1 [ 2.348178] Already setup the GSI :16 [ 2.351094] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 2.351434] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.374877] pps pps0: new PPS source ptp0 [ 2.375076] igb 0000:07:00.0: added PHC on eth0 [ 2.375212] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.375340] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.375506] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.375623] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.375892] xen: registering gsi 17 triggering 0 polarity 1 [ 2.375902] Already setup the GSI :17 [ 2.405435] pps pps1: new PPS source ptp1 [ 2.405638] igb 0000:08:00.0: added PHC on eth1 [ 2.405788] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.405943] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.406116] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.406238] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.406478] xen: registering gsi 16 triggering 0 polarity 1 [ 2.406485] Already setup the GSI :16 [ 2.464458] igb 0000:0b:00.0: added PHC on eth2 [ 2.464597] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.464731] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.464938] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.465054] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.465298] xen: registering gsi 17 triggering 0 polarity 1 [ 2.465306] Already setup the GSI :17 [ 2.521311] igb 0000:0b:00.1: added PHC on eth3 [ 2.521485] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.521640] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.521899] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.522018] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.522297] xen: registering gsi 18 triggering 0 polarity 1 [ 2.522307] Already setup the GSI :18 [ 2.579288] igb 0000:0b:00.2: added PHC on eth4 [ 2.579432] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.579554] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.579774] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.579891] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.580138] xen: registering gsi 19 triggering 0 polarity 1 [ 2.580147] Already setup the GSI :19 [ 2.637584] igb 0000:0b:00.3: added PHC on eth5 [ 2.637739] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.637862] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.638066] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.638183] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.641434] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.653238] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.663952] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.672174] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.680054] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.689500] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 3.086161] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.215850] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.215979] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.508618] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.508959] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.509180] xen: registering gsi 17 triggering 0 polarity 1 [ 3.509191] Already setup the GSI :17 [ 4.249987] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.379560] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.379741] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.669166] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.672163] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.681243] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 5.107658] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.115892] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.603905] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.809864] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.835856] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.922653] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.459267] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.459471] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.459647] device enx0cc47a9f87be entered promiscuous mode [ 15.005310] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 15.111011] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 15.111387] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 15.111511] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 15.111814] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready