[ 0.000000] Linux version 6.11.0+ (osstest@himrod0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Tue Sep 24 03:48:30 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/pinot1--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000f6000000-0x00000000f6003fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SML/H8SML, BIOS 3.5 11/25/2013 [ 0.000000] DMI: Memory slots populated: 2/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000012] Xen PV: Detected 4 vCPUS [ 0.038870] tsc: Fast TSC calibration using PIT [ 0.038871] tsc: Detected 2799.702 MHz processor [ 0.038873] tsc: Detected 2800.016 MHz TSC [ 0.039095] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.039099] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.039105] last_pfn = 0xdfeb2 max_arch_pfn = 0x400000000 [ 0.039109] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.039111] MTRRs set to read-only [ 0.039114] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.065631] RAMDISK: [mem 0x04000000-0x05472fff] [ 0.065651] ACPI: Early table checksum verification disabled [ 0.066756] ACPI: RSDP 0x00000000000FA1C0 000024 (v02 ACPIAM) [ 0.066767] ACPI: XSDT 0x00000000DFEA0100 00007C (v01 SMCI 20131125 MSFT 00000097) [ 0.066800] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.066848] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20240827/tbfadt-560) [ 0.066859] ACPI: DSDT 0x00000000DFEA0600 00562B (v01 1CF11 1CF11000 00000000 INTL 20051117) [ 0.066870] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.066880] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.066890] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.066901] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.066912] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.066922] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.066933] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.066943] ACPI: SSDT 0x00000000DFEAA6F0 000B9C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.066954] ACPI: EINJ 0x00000000DFEAB290 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.066964] ACPI: BERT 0x00000000DFEAB420 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.066975] ACPI: ERST 0x00000000DFEAB450 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.066985] ACPI: HEST 0x00000000DFEAB660 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.066991] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.066993] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c2a] [ 0.066994] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.066995] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.066996] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.066998] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.066999] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.067000] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.067001] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.067002] ACPI: Reserving SSDT table memory at [mem 0xdfeaa6f0-0xdfeab28b] [ 0.067003] ACPI: Reserving EINJ table memory at [mem 0xdfeab290-0xdfeab3bf] [ 0.067005] ACPI: Reserving BERT table memory at [mem 0xdfeab420-0xdfeab44f] [ 0.067006] ACPI: Reserving ERST table memory at [mem 0xdfeab450-0xdfeab65f] [ 0.067007] ACPI: Reserving HEST table memory at [mem 0xdfeab660-0xdfeab707] [ 0.067124] APIC: Switched APIC routing to: Xen PV [ 0.069564] Zone ranges: [ 0.069565] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.069568] DMA32 [mem 0x0000000001000000-0x00000000dfeb1fff] [ 0.069570] Normal empty [ 0.069571] Movable zone start for each node [ 0.069572] Early memory node ranges [ 0.069573] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.069576] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.069578] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.069589] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.069682] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.073725] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.073738] p2m virtual area at (____ptrval____), size is 40000000 [ 0.294275] Remapped 102 page(s) [ 0.294283] Remapped 0 non-RAM page(s) [ 0.294825] ACPI: PM-Timer IO Port: 0x808 [ 0.294859] CPU topo: CPU limit of 4 reached. Ignoring further CPUs [ 0.294889] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.294893] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.294916] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.294925] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.294938] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.294942] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.294965] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.294969] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.294982] CPU topo: Max. logical packages: 1 [ 0.294983] CPU topo: Max. logical dies: 1 [ 0.294984] CPU topo: Max. dies per package: 1 [ 0.294991] CPU topo: Max. threads per core: 1 [ 0.294992] CPU topo: Num. cores per package: 4 [ 0.294993] CPU topo: Num. threads per package: 4 [ 0.294994] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.294995] CPU topo: Rejected CPUs 4 [ 0.295014] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.295017] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.295018] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.295020] PM: hibernation: Registered nosave memory: [mem 0x20066000-0xdfe9dfff] [ 0.295022] PM: hibernation: Registered nosave memory: [mem 0xdfe9e000-0xdfe9ffff] [ 0.295023] PM: hibernation: Registered nosave memory: [mem 0xdfea0000-0xdfeb1fff] [ 0.295026] [mem 0x20066000-0xdfe9dfff] available for PCI devices [ 0.295039] Booting kernel on Xen [ 0.295040] Xen version: 4.20-unstable (preserve-AD) [ 0.295045] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.301547] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.302439] percpu: Embedded 57 pages/cpu s194520 r8192 d30760 u524288 [ 0.302449] pcpu-alloc: s194520 r8192 d30760 u524288 alloc=1*2097152 [ 0.302453] pcpu-alloc: [0] 0 1 2 3 [ 0.302538] xen: PV spinlocks enabled [ 0.302542] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.302545] Kernel command line: placeholder root=/dev/mapper/pinot1--vg-root ro console=hvc0 [ 0.302624] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.302823] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.302919] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.303134] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.303137] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.303140] software IO TLB: area num 4. [ 0.408391] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.411270] Dynamic Preempt: voluntary [ 0.411382] rcu: Preemptible hierarchical RCU implementation. [ 0.411384] rcu: RCU event tracing is enabled. [ 0.411385] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.411388] Trampoline variant of Tasks RCU enabled. [ 0.411389] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.411390] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.411412] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.418492] NR_IRQS: 4352, nr_irqs: 1000, preallocated irqs: 16 [ 0.418646] xen:events: Using FIFO-based ABI [ 0.418689] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.418696] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.418701] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.418713] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.418718] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.418724] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.418730] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.418736] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.418741] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.418747] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.418753] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.418759] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.418765] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.418770] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.418776] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.418787] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.424914] Console: colour VGA+ 80x25 [ 0.424919] printk: legacy console [tty0] enabled [ 0.439104] printk: legacy console [hvc0] enabled [ 0.439829] ACPI: Core revision 20240827 [ 0.443798] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.443980] Xen: using vcpuop timer interface [ 0.443987] installing Xen timer for CPU 0 [ 0.444237] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c4f9921a, max_idle_ns: 440795230423 ns [ 0.444397] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.03 BogoMIPS (lpj=2800016) [ 0.444592] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.444799] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.444909] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.445024] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.445405] Spectre V2 : Mitigation: Retpolines [ 0.445508] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.445655] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.445766] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.445876] RETBleed: Mitigation: untrained return thunk [ 0.445983] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.446128] Speculative Store Bypass: Vulnerable [ 0.446252] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.446399] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.446509] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.446640] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.446749] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.472188] Freeing SMP alternatives memory: 40K [ 0.472329] pid_max: default: 32768 minimum: 301 [ 0.472437] LSM: initializing lsm=capability,selinux [ 0.472576] SELinux: Initializing. [ 0.472894] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.473041] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.474531] cpu 0 spinlock event irq 57 [ 0.474645] VPMU disabled by hypervisor. [ 0.475216] Performance Events: PMU not available due to virtualization, using software events only. [ 0.475401] signal: max sigframe size: 1776 [ 0.476423] rcu: Hierarchical SRCU implementation. [ 0.476558] rcu: Max phase no-delay instances is 400. [ 0.476792] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.487408] smp: Bringing up secondary CPUs ... [ 0.489469] installing Xen timer for CPU 1 [ 0.489936] installing Xen timer for CPU 2 [ 0.490316] installing Xen timer for CPU 3 [ 0.026601] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0011 [ 0.490534] cpu 1 spinlock event irq 77 [ 0.026601] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0012 [ 0.491655] cpu 2 spinlock event irq 78 [ 0.026601] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0013 [ 0.492628] cpu 3 spinlock event irq 79 [ 0.493658] smp: Brought up 1 node, 4 CPUs [ 0.494588] Memory: 381936K/524284K available (16384K kernel code, 2784K rwdata, 6296K rodata, 2704K init, 1736K bss, 138296K reserved, 0K cma-reserved) [ 0.495001] devtmpfs: initialized [ 0.495456] x86/mm: Memory block size: 128MB [ 0.496077] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.496437] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.496594] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.497321] PM: RTC time: 06:49:30, date: 2024-09-24 [ 0.497898] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.498039] xen:grant_table: Grant tables using version 1 layout [ 0.498178] Grant table initialized [ 0.498535] audit: initializing netlink subsys (disabled) [ 0.498702] audit: type=2000 audit(1727160570.688:1): state=initialized audit_enabled=0 res=1 [ 0.499509] thermal_sys: Registered thermal governor 'step_wise' [ 0.499512] thermal_sys: Registered thermal governor 'user_space' [ 0.500706] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.500976] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.741704] PCI: Using configuration type 1 for base access [ 0.741982] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.742531] ACPI: Added _OSI(Module Device) [ 0.743401] ACPI: Added _OSI(Processor Device) [ 0.743513] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.743623] ACPI: Added _OSI(Processor Aggregator Device) [ 0.749860] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.750460] xen: registering gsi 9 triggering 0 polarity 1 [ 0.751678] ACPI: Interpreter enabled [ 0.751812] ACPI: PM: (supports S0 S1 S4 S5) [ 0.751922] ACPI: Using IOAPIC for interrupt routing [ 0.752079] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.752240] PCI: Using E820 reservations for host bridge windows [ 0.752547] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.764523] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.764664] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.764825] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.764944] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.765095] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.765573] PCI host bridge to bus 0000:00 [ 0.765685] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.765830] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.765948] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.766100] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.766249] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.766399] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.766571] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.767247] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.767844] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.768093] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.768247] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.768370] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.768464] pci 0000:00:09.0: enabling Extended Tags [ 0.768727] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.769052] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.769329] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.769415] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.769538] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.769721] pci 0000:00:0a.0: enabling Extended Tags [ 0.769979] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.770328] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f conventional PCI endpoint [ 0.770507] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.770649] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.770789] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.770932] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.771072] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.771212] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.771397] pci 0000:00:11.0: set SATA to AHCI mode [ 0.771787] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.772006] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.772445] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.772649] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.773132] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.773346] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.773666] pci 0000:00:12.2: supports D1 D2 [ 0.773776] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.774073] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.774277] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.774715] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.774919] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.775407] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.775611] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.775997] pci 0000:00:13.2: supports D1 D2 [ 0.776107] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.776435] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.777020] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.777227] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.777376] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.777426] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.777592] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.777731] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.777908] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.778026] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.778143] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.778260] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.778626] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.779206] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.779466] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.779605] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.779735] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.780107] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.780310] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.780742] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.781149] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.781553] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.781920] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.782326] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.782600] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.783147] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.783356] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.783462] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.783607] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.784034] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.784486] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.784847] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.785058] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.785277] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.785420] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.785858] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.786304] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.786468] pci_bus 0000:03: extended config space not accessible [ 0.786655] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.787454] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.787601] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.787746] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.788010] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.788447] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.788605] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.788758] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.788912] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.789069] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.789225] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.789467] pci_bus 0000:00: on NUMA node 0 [ 0.790061] xen: registering gsi 13 triggering 1 polarity 0 [ 0.790575] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.790774] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.790987] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.791224] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.791422] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.791618] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.791813] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.792010] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.792262] xen:balloon: Initialising balloon driver [ 0.792491] iommu: Default domain type: Translated [ 0.792603] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.792818] SCSI subsystem initialized [ 0.792939] libata version 3.00 loaded. [ 0.792939] ACPI: bus type USB registered [ 0.793418] usbcore: registered new interface driver usbfs [ 0.793541] usbcore: registered new interface driver hub [ 0.793663] usbcore: registered new device driver usb [ 0.793796] pps_core: LinuxPPS API ver. 1 registered [ 0.793920] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.794079] PTP clock support registered [ 0.794454] Advanced Linux Sound Architecture Driver Initialized. [ 0.794946] NetLabel: Initializing [ 0.795052] NetLabel: domain hash size = 128 [ 0.795160] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.795302] NetLabel: unlabeled traffic allowed by default [ 0.795474] PCI: Using ACPI for IRQ routing [ 0.827173] PCI: pci_cache_line_size set to 64 bytes [ 0.827408] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.827413] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.827461] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.827549] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.827663] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.827818] vgaarb: loaded [ 0.832125] clocksource: Switched to clocksource tsc-early [ 0.832372] VFS: Disk quotas dquot_6.6.0 [ 0.832372] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.832372] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.832372] pnp: PnP ACPI init [ 0.832594] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.832776] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.832776] xen: registering gsi 8 triggering 1 polarity 0 [ 0.833659] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.833981] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.834103] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.834656] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.834774] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.834891] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.835006] system 00:05: [io 0x040b] has been reserved [ 0.835138] system 00:05: [io 0x04d6] has been reserved [ 0.835250] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.835366] system 00:05: [io 0x0c14] has been reserved [ 0.835489] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.835605] system 00:05: [io 0x0c52] has been reserved [ 0.835717] system 00:05: [io 0x0c6c] has been reserved [ 0.835833] system 00:05: [io 0x0c6f] has been reserved [ 0.835954] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.836069] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.836184] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.836314] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.836439] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.836554] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.836670] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.836785] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.836901] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.837017] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.837132] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.837250] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.837379] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.837530] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.837929] xen: registering gsi 4 triggering 1 polarity 0 [ 0.837933] Already setup the GSI :4 [ 0.838039] pnp 00:06: [dma 0 disabled] [ 0.838375] xen: registering gsi 3 triggering 1 polarity 0 [ 0.838387] pnp 00:07: [dma 0 disabled] [ 0.838572] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.839040] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.839237] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.839359] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.839487] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.839607] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.839899] pnp: PnP ACPI: found 10 devices [ 0.863044] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.863242] NET: Registered PF_INET protocol family [ 0.863452] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.863934] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.864091] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.864241] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.864462] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.864659] TCP: Hash tables configured (established 4096 bind 4096) [ 0.864844] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.864969] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.865147] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.865583] RPC: Registered named UNIX socket transport module. [ 0.865732] RPC: Registered udp transport module. [ 0.865842] RPC: Registered tcp transport module. [ 0.865952] RPC: Registered tcp-with-tls transport module. [ 0.866063] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.866781] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.866931] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.867062] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.867203] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.867318] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.867460] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.867601] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.867734] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.867861] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.868055] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.868173] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.868290] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.868418] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.868537] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.868656] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.868770] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.868886] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.868999] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.869156] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.869300] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.869428] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.869545] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.869661] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.869779] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.869897] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.870237] xen: registering gsi 16 triggering 0 polarity 1 [ 0.870282] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.533623] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 647941 usecs [ 1.533907] xen: registering gsi 16 triggering 0 polarity 1 [ 1.533919] Already setup the GSI :16 [ 1.558619] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 24193 usecs [ 1.558916] xen: registering gsi 17 triggering 0 polarity 1 [ 1.558991] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.559201] xen: registering gsi 18 triggering 0 polarity 1 [ 1.559221] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.583619] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 23903 usecs [ 1.583879] xen: registering gsi 18 triggering 0 polarity 1 [ 1.583893] Already setup the GSI :18 [ 1.608618] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 24219 usecs [ 1.608885] xen: registering gsi 19 triggering 0 polarity 1 [ 1.608943] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.609171] xen: registering gsi 18 triggering 0 polarity 1 [ 1.609176] Already setup the GSI :18 [ 1.632617] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 22953 usecs [ 1.632890] PCI: CLS 64 bytes, default 64 [ 1.633045] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.633162] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 1.633392] kvm_intel: VMX not supported by CPU 1 [ 1.633515] kvm_amd: SVM not supported by CPU 1 [ 1.633628] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c4f9921a, max_idle_ns: 440795230423 ns [ 1.636126] clocksource: Switched to clocksource tsc [ 1.637464] Unpacking initramfs... [ 1.708101] Initialise system trusted keyrings [ 1.708431] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.708837] NFS: Registering the id_resolver key type [ 1.708951] Key type id_resolver registered [ 1.709093] Key type id_legacy registered [ 1.709297] 9p: Installing v9fs 9p2000 file system support [ 1.739460] Key type asymmetric registered [ 1.739896] Asymmetric key parser 'x509' registered [ 1.740299] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.740771] io scheduler mq-deadline registered [ 1.741075] io scheduler kyber registered [ 1.742564] xen: registering gsi 53 triggering 0 polarity 1 [ 1.742666] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.742987] xen: registering gsi 54 triggering 0 polarity 1 [ 1.743006] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.743391] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.743585] ACPI: button: Power Button [PWRB] [ 1.743761] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.744321] ACPI: button: Power Button [PWRF] [ 1.750316] xen:xen_evtchn: Event-channel device installed [ 1.750590] xen_pciback: backend is vpci [ 1.752732] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.753909] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.755140] hpet_acpi_add: no address or irqs in _CRS [ 1.755685] Non-volatile memory driver v1.3 [ 1.760665] loop: module loaded [ 1.781955] ahci 0000:00:11.0: version 3.0 [ 1.782096] xen: registering gsi 22 triggering 0 polarity 1 [ 1.782140] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.782298] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.782453] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.782563] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.784444] scsi host0: ahci [ 1.785984] scsi host1: ahci [ 1.787407] scsi host2: ahci [ 1.788878] scsi host3: ahci [ 1.789546] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 4 [ 1.789885] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 4 [ 1.790230] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 4 [ 1.790658] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 4 [ 1.792222] tun: Universal TUN/TAP device driver, 1.6 [ 1.792810] e100: Intel(R) PRO/100 Network Driver [ 1.793106] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.793506] sky2: driver version 1.30 [ 1.793776] xen_netfront: Initialising Xen virtual ethernet driver [ 1.794318] xen: registering gsi 16 triggering 0 polarity 1 [ 1.794330] Already setup the GSI :16 [ 1.794508] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.794636] xen: registering gsi 19 triggering 0 polarity 1 [ 1.794691] Already setup the GSI :19 [ 1.794696] xen: registering gsi 17 triggering 0 polarity 1 [ 1.794702] Already setup the GSI :17 [ 1.794759] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.794898] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.849909] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.850085] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.850242] usb usb1: Product: OHCI PCI host controller [ 1.850349] usb usb1: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.850455] usb usb1: SerialNumber: 0000:00:12.0 [ 1.850856] hub 1-0:1.0: USB hub found [ 1.850971] hub 1-0:1.0: 3 ports detected [ 1.851269] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.851480] xen: registering gsi 16 triggering 0 polarity 1 [ 1.851490] Already setup the GSI :16 [ 1.851672] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.851833] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.852002] ehci-pci 0000:00:13.2: debug port 1 [ 1.852266] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 1.858648] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.858918] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 1.859065] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.859245] usb usb2: Product: EHCI Host Controller [ 1.859350] usb usb2: Manufacturer: Linux 6.11.0+ ehci_hcd [ 1.859456] usb usb2: SerialNumber: 0000:00:13.2 [ 1.859904] hub 2-0:1.0: USB hub found [ 1.860046] hub 2-0:1.0: 6 ports detected [ 1.873993] Freeing initrd memory: 20940K [ 1.914944] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.915402] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3 [ 1.915549] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.915744] ehci-pci 0000:00:12.2: debug port 1 [ 1.916023] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.921637] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.921861] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 1.922008] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.922150] usb usb3: Product: EHCI Host Controller [ 1.922280] usb usb3: Manufacturer: Linux 6.11.0+ ehci_hcd [ 1.922387] usb usb3: SerialNumber: 0000:00:12.2 [ 1.922984] hub 3-0:1.0: USB hub found [ 1.923097] hub 3-0:1.0: 6 ports detected [ 1.971789] hub 1-0:1.0: USB hub found [ 1.971930] hub 1-0:1.0: 3 ports detected [ 1.972408] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.973169] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.973763] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 2.028787] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 2.028941] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.029082] usb usb4: Product: OHCI PCI host controller [ 2.029187] usb usb4: Manufacturer: Linux 6.11.0+ ohci_hcd [ 2.029293] usb usb4: SerialNumber: 0000:00:12.1 [ 2.029577] hub 4-0:1.0: USB hub found [ 2.029771] hub 4-0:1.0: 3 ports detected [ 2.030135] xen: registering gsi 18 triggering 0 polarity 1 [ 2.030143] Already setup the GSI :18 [ 2.030290] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.030512] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 2.030730] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 2.085746] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 2.085899] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.086065] usb usb5: Product: OHCI PCI host controller [ 2.086169] usb usb5: Manufacturer: Linux 6.11.0+ ohci_hcd [ 2.086273] usb usb5: SerialNumber: 0000:00:13.0 [ 2.086548] hub 5-0:1.0: USB hub found [ 2.086675] hub 5-0:1.0: 3 ports detected [ 2.087057] xen: registering gsi 18 triggering 0 polarity 1 [ 2.087062] Already setup the GSI :18 [ 2.087224] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 2.087402] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 2.087586] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 2.097557] ata3: SATA link down (SStatus 0 SControl 300) [ 2.097716] ata4: SATA link down (SStatus 0 SControl 300) [ 2.142750] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 2.142902] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.143043] usb usb6: Product: OHCI PCI host controller [ 2.143151] usb usb6: Manufacturer: Linux 6.11.0+ ohci_hcd [ 2.143256] usb usb6: SerialNumber: 0000:00:13.1 [ 2.143551] hub 6-0:1.0: USB hub found [ 2.143679] hub 6-0:1.0: 3 ports detected [ 2.144074] xen: registering gsi 18 triggering 0 polarity 1 [ 2.144080] Already setup the GSI :18 [ 2.144217] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.144393] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.144569] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 2.199742] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 2.199892] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.200032] usb usb7: Product: OHCI PCI host controller [ 2.200136] usb usb7: Manufacturer: Linux 6.11.0+ ohci_hcd [ 2.200281] usb usb7: SerialNumber: 0000:00:14.5 [ 2.200543] hub 7-0:1.0: USB hub found [ 2.200668] hub 7-0:1.0: 2 ports detected [ 2.201067] usbcore: registered new interface driver usblp [ 2.201205] usbcore: registered new interface driver usb-storage [ 2.201425] i8042: PNP: No PS/2 controller found. [ 2.201528] i8042: Probing ports directly. [ 2.204789] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.204897] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.205282] rtc_cmos 00:02: RTC can wake from S4 [ 2.205862] rtc_cmos 00:02: registered as rtc0 [ 2.206079] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 2.206231] device-mapper: uevent: version 1.0.3 [ 2.206429] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 2.206582] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 2.206748] hid: raw HID events driver (C) Jiri Kosina [ 2.207088] usbcore: registered new interface driver usbhid [ 2.207233] usbhid: USB HID core driver [ 2.207785] Initializing XFRM netlink socket [ 2.207902] NET: Registered PF_INET6 protocol family [ 2.208666] Segment Routing with IPv6 [ 2.208781] In-situ OAM (IOAM) with IPv6 [ 2.208918] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.209178] NET: Registered PF_PACKET protocol family [ 2.209309] 9pnet: Installing 9P2000 support [ 2.209425] Key type dns_resolver registered [ 2.209541] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 2.210127] IPI shorthand broadcast: enabled [ 2.214769] sched_clock: Marking stable (2189004841, 25601062)->(2230327323, -15721420) [ 2.215341] registered taskstats version 1 [ 2.215460] Loading compiled-in X.509 certificates [ 2.217654] PM: Magic number: 8:245:823 [ 2.217816] printk: legacy console [netcon0] enabled [ 2.217946] netconsole: network logging started [ 2.218204] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.228958] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.229350] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 2.231344] ALSA device list: [ 2.231450] No soundcards found. [ 2.232294] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 2.251690] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.251836] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.252479] ata2.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133 [ 2.252989] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.253309] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 2.253803] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.253961] ata2.00: configured for UDMA/133 [ 2.255587] ata1.00: configured for UDMA/133 [ 2.266009] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.266686] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.266713] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.267022] sd 0:0:0:0: [sda] Write Protect is off [ 2.267138] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.267168] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.267232] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5 [ 2.267456] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.268065] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.268066] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.268070] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 2.268492] sd 1:0:0:0: [sdb] Write Protect is off [ 2.268597] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.268637] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.268821] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 2.307134] sda: sda1 sda2 < sda5 > [ 2.307486] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.319067] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.320768] Freeing unused kernel image (initmem) memory: 2704K [ 2.320941] Write protecting the kernel read-only data: 24576k [ 2.333890] Freeing unused kernel image (rodata/data gap) memory: 1896K [ 2.384678] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.449195] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.449313] Run /init as init process [ 2.449414] with arguments: [ 2.449416] /init [ 2.449418] placeholder [ 2.449419] with environment: [ 2.449420] HOME=/ [ 2.449422] TERM=linux [ 2.543758] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.543917] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.544055] usb 6-2: Product: Hermon USB hidmouse Device [ 2.544164] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.550331] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.550835] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.554353] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.715631] e1000e: Intel(R) PRO/1000 Network Driver [ 2.715762] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.715995] xen: registering gsi 48 triggering 0 polarity 1 [ 2.716036] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.716365] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.758449] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.760925] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.801486] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e9:2a [ 2.801681] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.801888] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.802138] xen: registering gsi 47 triggering 0 polarity 1 [ 2.802167] xen: --> pirq=47 -> irq=47 (gsi=47) [ 2.802364] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.847648] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.891616] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e9:2b [ 2.891772] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.891963] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.893852] e1000e 0000:01:00.0 enx002590aee92a: renamed from eth0 [ 2.895119] e1000e 0000:02:00.0 enx002590aee92b: renamed from eth1 [ 2.901705] random: crng init done [ 3.613765] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.624641] EXT4-fs (dm-0): mounted filesystem 3d809116-d6c1-43d0-85aa-a8570411ea01 ro with ordered data mode. Quota mode: none. [ 7.852451] EXT4-fs (dm-0): re-mounted 3d809116-d6c1-43d0-85aa-a8570411ea01 r/w. Quota mode: none. [ 9.248990] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.276807] EXT4-fs (sda1): mounted filesystem 82eefd75-d0c2-44e3-99b0-5af286b31fe3 r/w with ordered data mode. Quota mode: none. [ 9.342278] Adding 1949692k swap on /dev/mapper/pinot1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 10.962935] xenbr0: port 1(enx002590aee92a) entered blocking state [ 10.963113] xenbr0: port 1(enx002590aee92a) entered disabled state [ 10.963230] e1000e 0000:01:00.0 enx002590aee92a: entered allmulticast mode [ 10.963389] e1000e 0000:01:00.0 enx002590aee92a: entered promiscuous mode [ 14.283654] e1000e 0000:01:00.0 enx002590aee92a: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 14.284006] xenbr0: port 1(enx002590aee92a) entered blocking state [ 14.284139] xenbr0: port 1(enx002590aee92a) entered forwarding state