[ 0.000000] Linux version 6.11.0+ (osstest@himrod0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Tue Sep 24 03:48:30 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/pinot1--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000f6000000-0x00000000f6003fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SML/H8SML, BIOS 3.5 11/25/2013 [ 0.000000] DMI: Memory slots populated: 2/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000011] Xen PV: Detected 4 vCPUS [ 0.039087] tsc: Fast TSC calibration using PIT [ 0.039088] tsc: Detected 2800.143 MHz processor [ 0.039090] tsc: Detected 2799.996 MHz TSC [ 0.039307] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.039310] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.039317] last_pfn = 0xdfeb2 max_arch_pfn = 0x400000000 [ 0.039320] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.039322] MTRRs set to read-only [ 0.039325] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.065320] RAMDISK: [mem 0x04000000-0x05472fff] [ 0.065332] ACPI: Early table checksum verification disabled [ 0.066081] ACPI: RSDP 0x00000000000FA1C0 000024 (v02 ACPIAM) [ 0.066089] ACPI: XSDT 0x00000000DFEA0100 00007C (v01 SMCI 20131125 MSFT 00000097) [ 0.066114] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.066146] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20240827/tbfadt-560) [ 0.066156] ACPI: DSDT 0x00000000DFEA0600 00562B (v01 1CF11 1CF11000 00000000 INTL 20051117) [ 0.066166] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.066175] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.066184] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.066194] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.066204] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.066214] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.066223] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.066233] ACPI: SSDT 0x00000000DFEAA6F0 000B9C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.066242] ACPI: EINJ 0x00000000DFEAB290 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.066252] ACPI: BERT 0x00000000DFEAB420 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.066263] ACPI: ERST 0x00000000DFEAB450 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.066273] ACPI: HEST 0x00000000DFEAB660 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.066278] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.066280] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c2a] [ 0.066281] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.066282] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.066284] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.066285] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.066286] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.066287] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.066288] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.066289] ACPI: Reserving SSDT table memory at [mem 0xdfeaa6f0-0xdfeab28b] [ 0.066291] ACPI: Reserving EINJ table memory at [mem 0xdfeab290-0xdfeab3bf] [ 0.066292] ACPI: Reserving BERT table memory at [mem 0xdfeab420-0xdfeab44f] [ 0.066293] ACPI: Reserving ERST table memory at [mem 0xdfeab450-0xdfeab65f] [ 0.066294] ACPI: Reserving HEST table memory at [mem 0xdfeab660-0xdfeab707] [ 0.066382] APIC: Switched APIC routing to: Xen PV [ 0.068739] Zone ranges: [ 0.068740] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.068743] DMA32 [mem 0x0000000001000000-0x00000000dfeb1fff] [ 0.068745] Normal empty [ 0.068746] Movable zone start for each node [ 0.068747] Early memory node ranges [ 0.068747] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.068749] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.068751] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.068758] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.068817] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.071192] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.071198] p2m virtual area at (____ptrval____), size is 40000000 [ 0.291184] Remapped 102 page(s) [ 0.291186] Remapped 0 non-RAM page(s) [ 0.291689] ACPI: PM-Timer IO Port: 0x808 [ 0.291713] CPU topo: CPU limit of 4 reached. Ignoring further CPUs [ 0.291736] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.291739] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.291758] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.291766] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.291775] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.291779] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.291797] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.291801] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.291811] CPU topo: Max. logical packages: 1 [ 0.291812] CPU topo: Max. logical dies: 1 [ 0.291813] CPU topo: Max. dies per package: 1 [ 0.291819] CPU topo: Max. threads per core: 1 [ 0.291820] CPU topo: Num. cores per package: 4 [ 0.291821] CPU topo: Num. threads per package: 4 [ 0.291822] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.291823] CPU topo: Rejected CPUs 4 [ 0.291837] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.291840] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.291841] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.291843] PM: hibernation: Registered nosave memory: [mem 0x20066000-0xdfe9dfff] [ 0.291844] PM: hibernation: Registered nosave memory: [mem 0xdfe9e000-0xdfe9ffff] [ 0.291845] PM: hibernation: Registered nosave memory: [mem 0xdfea0000-0xdfeb1fff] [ 0.291847] [mem 0x20066000-0xdfe9dfff] available for PCI devices [ 0.291851] Booting kernel on Xen [ 0.291852] Xen version: 4.20-unstable (preserve-AD) [ 0.291855] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.298181] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.298741] percpu: Embedded 57 pages/cpu s194520 r8192 d30760 u524288 [ 0.298749] pcpu-alloc: s194520 r8192 d30760 u524288 alloc=1*2097152 [ 0.298752] pcpu-alloc: [0] 0 1 2 3 [ 0.298809] xen: PV spinlocks enabled [ 0.298812] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.298816] Kernel command line: placeholder root=/dev/mapper/pinot1--vg-root ro console=hvc0 [ 0.298871] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.298992] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.299051] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.299237] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.299240] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.299242] software IO TLB: area num 4. [ 0.368621] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.371113] Dynamic Preempt: voluntary [ 0.371210] rcu: Preemptible hierarchical RCU implementation. [ 0.371212] rcu: RCU event tracing is enabled. [ 0.371212] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.371214] Trampoline variant of Tasks RCU enabled. [ 0.371215] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.371217] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.371234] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.378050] NR_IRQS: 4352, nr_irqs: 1000, preallocated irqs: 16 [ 0.378173] xen:events: Using FIFO-based ABI [ 0.378195] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.378204] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.378209] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.378215] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.378219] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.378224] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.378229] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.378234] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.378239] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.378244] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.378249] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.378254] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.378259] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.378264] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.378268] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.378277] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.384368] Console: colour VGA+ 80x25 [ 0.384372] printk: legacy console [tty0] enabled [ 0.398421] printk: legacy console [hvc0] enabled [ 0.402350] ACPI: Core revision 20240827 [ 0.407635] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.408052] Xen: using vcpuop timer interface [ 0.408079] installing Xen timer for CPU 0 [ 0.409100] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c3d4ddab, max_idle_ns: 440795322762 ns [ 0.409491] Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.99 BogoMIPS (lpj=2799996) [ 0.410998] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.411652] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.411964] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.412273] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.412507] Spectre V2 : Mitigation: Retpolines [ 0.412815] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.413159] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.413462] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.413766] RETBleed: Mitigation: untrained return thunk [ 0.414058] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.414418] Speculative Store Bypass: Vulnerable [ 0.414578] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.414940] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.415154] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.415263] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.415371] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.437970] Freeing SMP alternatives memory: 40K [ 0.438090] pid_max: default: 32768 minimum: 301 [ 0.438222] LSM: initializing lsm=capability,selinux [ 0.438352] SELinux: Initializing. [ 0.438647] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.438790] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.440607] cpu 0 spinlock event irq 57 [ 0.440721] VPMU disabled by hypervisor. [ 0.441305] Performance Events: PMU not available due to virtualization, using software events only. [ 0.441467] signal: max sigframe size: 1776 [ 0.441545] rcu: Hierarchical SRCU implementation. [ 0.441648] rcu: Max phase no-delay instances is 400. [ 0.441855] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.451423] smp: Bringing up secondary CPUs ... [ 0.451683] installing Xen timer for CPU 1 [ 0.454496] installing Xen timer for CPU 2 [ 0.454890] installing Xen timer for CPU 3 [ 0.032199] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0011 [ 0.455107] cpu 1 spinlock event irq 77 [ 0.032199] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0012 [ 0.455524] cpu 2 spinlock event irq 78 [ 0.032199] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0013 [ 0.455765] cpu 3 spinlock event irq 79 [ 0.456609] smp: Brought up 1 node, 4 CPUs [ 0.456804] Memory: 381936K/524284K available (16384K kernel code, 2784K rwdata, 6296K rodata, 2704K init, 1736K bss, 138296K reserved, 0K cma-reserved) [ 0.457110] devtmpfs: initialized [ 0.457110] x86/mm: Memory block size: 128MB [ 0.457945] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.457945] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.457945] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.458592] PM: RTC time: 05:05:20, date: 2024-09-24 [ 0.458919] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.459053] xen:grant_table: Grant tables using version 1 layout [ 0.459179] Grant table initialized [ 0.459517] audit: initializing netlink subsys (disabled) [ 0.459667] audit: type=2000 audit(1727154321.416:1): state=initialized audit_enabled=0 res=1 [ 0.459685] thermal_sys: Registered thermal governor 'step_wise' [ 0.459685] thermal_sys: Registered thermal governor 'user_space' [ 0.460556] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.460816] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.541510] PCI: Using configuration type 1 for base access [ 0.541694] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.541695] ACPI: Added _OSI(Module Device) [ 0.541695] ACPI: Added _OSI(Processor Device) [ 0.541753] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.541856] ACPI: Added _OSI(Processor Aggregator Device) [ 0.546924] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.547456] xen: registering gsi 9 triggering 0 polarity 1 [ 0.550865] ACPI: Interpreter enabled [ 0.551019] ACPI: PM: (supports S0 S1 S4 S5) [ 0.551124] ACPI: Using IOAPIC for interrupt routing [ 0.551124] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.551124] PCI: Using E820 reservations for host bridge windows [ 0.551124] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.561847] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.561999] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.562151] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.562285] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.562426] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.562833] PCI host bridge to bus 0000:00 [ 0.562940] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.563052] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.563164] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.563325] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.563485] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.563658] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.563843] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.564380] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.564957] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.565173] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.565291] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.565406] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.566537] pci 0000:00:09.0: enabling Extended Tags [ 0.566864] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.567158] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.567373] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.567493] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.567607] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.567837] pci 0000:00:0a.0: enabling Extended Tags [ 0.568090] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.568412] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f conventional PCI endpoint [ 0.568528] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.568659] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.568850] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.568981] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.569133] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.569261] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.569428] pci 0000:00:11.0: set SATA to AHCI mode [ 0.569743] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.569964] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.570384] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.570528] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.571041] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.571231] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.571591] pci 0000:00:12.2: supports D1 D2 [ 0.571724] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.572038] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.572234] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.572637] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.572858] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.573301] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.573492] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.573871] pci 0000:00:13.2: supports D1 D2 [ 0.574005] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.574301] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.574819] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.575088] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.575219] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.575348] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.575475] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.575508] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.575669] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.575807] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.575926] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.576068] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.576398] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.576871] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.577136] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.577266] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.577414] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.577636] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.577857] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.578301] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.578681] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.579072] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.579394] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.579691] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.580081] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.580601] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.580820] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.581042] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.581183] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.581593] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.582090] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.582381] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.582537] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.582701] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.582834] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.583327] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.585534] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.585726] pci_bus 0000:03: extended config space not accessible [ 0.585896] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.587534] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.587672] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.587806] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.588135] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.588543] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.588676] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.588821] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.588966] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.589164] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.589315] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.589527] pci_bus 0000:00: on NUMA node 0 [ 0.589991] xen: registering gsi 13 triggering 1 polarity 0 [ 0.590429] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.590553] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.590731] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.590946] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.591127] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.591306] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.591480] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.591667] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.591888] xen:balloon: Initialising balloon driver [ 0.592568] iommu: Default domain type: Translated [ 0.592673] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.592892] SCSI subsystem initialized [ 0.592892] libata version 3.00 loaded. [ 0.592892] ACPI: bus type USB registered [ 0.592892] usbcore: registered new interface driver usbfs [ 0.592892] usbcore: registered new interface driver hub [ 0.592894] usbcore: registered new device driver usb [ 0.593021] pps_core: LinuxPPS API ver. 1 registered [ 0.593125] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.593274] PTP clock support registered [ 0.594528] Advanced Linux Sound Architecture Driver Initialized. [ 0.594901] NetLabel: Initializing [ 0.595004] NetLabel: domain hash size = 128 [ 0.595105] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.595229] NetLabel: unlabeled traffic allowed by default [ 0.595229] PCI: Using ACPI for IRQ routing [ 0.621330] PCI: pci_cache_line_size set to 64 bytes [ 0.621499] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.621503] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.621529] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.621619] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.621740] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.621885] vgaarb: loaded [ 0.624454] clocksource: Switched to clocksource tsc-early [ 0.624744] VFS: Disk quotas dquot_6.6.0 [ 0.624858] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.625005] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.625158] pnp: PnP ACPI init [ 0.625538] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.625768] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.626178] xen: registering gsi 8 triggering 1 polarity 0 [ 0.626381] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.626673] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.626797] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.627216] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.627326] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.627434] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.627551] system 00:05: [io 0x040b] has been reserved [ 0.627657] system 00:05: [io 0x04d6] has been reserved [ 0.627762] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.627897] system 00:05: [io 0x0c14] has been reserved [ 0.628003] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.628113] system 00:05: [io 0x0c52] has been reserved [ 0.628232] system 00:05: [io 0x0c6c] has been reserved [ 0.628341] system 00:05: [io 0x0c6f] has been reserved [ 0.628446] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.628565] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.628676] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.628784] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.628892] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.629000] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.629134] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.629242] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.629350] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.629458] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.629610] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.629718] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.629829] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.629939] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.630288] xen: registering gsi 4 triggering 1 polarity 0 [ 0.630291] Already setup the GSI :4 [ 0.630417] pnp 00:06: [dma 0 disabled] [ 0.630714] xen: registering gsi 3 triggering 1 polarity 0 [ 0.630725] pnp 00:07: [dma 0 disabled] [ 0.630873] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.631219] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.631401] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.631527] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.631660] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.631772] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.632033] pnp: PnP ACPI: found 10 devices [ 0.651563] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.651705] NET: Registered PF_INET protocol family [ 0.651861] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.652258] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.652421] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.652630] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.652803] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.652966] TCP: Hash tables configured (established 4096 bind 4096) [ 0.653101] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.653215] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.653362] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.653656] RPC: Registered named UNIX socket transport module. [ 0.653766] RPC: Registered udp transport module. [ 0.653869] RPC: Registered tcp transport module. [ 0.653971] RPC: Registered tcp-with-tls transport module. [ 0.654076] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.654581] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.654694] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.654827] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.654954] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.655061] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.655177] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.655305] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.655418] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.655550] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.655704] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.655813] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.655951] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.656087] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.656198] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.656308] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.656414] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.656537] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.656643] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.656752] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.656860] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.656970] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.657078] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.657186] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.657354] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.657465] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.657723] xen: registering gsi 16 triggering 0 polarity 1 [ 0.657744] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.319636] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 646462 usecs [ 1.319863] xen: registering gsi 16 triggering 0 polarity 1 [ 1.319870] Already setup the GSI :16 [ 1.342635] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 22293 usecs [ 1.342865] xen: registering gsi 17 triggering 0 polarity 1 [ 1.342910] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.343082] xen: registering gsi 18 triggering 0 polarity 1 [ 1.343098] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.365633] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 22073 usecs [ 1.365886] xen: registering gsi 18 triggering 0 polarity 1 [ 1.365893] Already setup the GSI :18 [ 1.388634] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 22269 usecs [ 1.388867] xen: registering gsi 19 triggering 0 polarity 1 [ 1.388904] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.389104] xen: registering gsi 18 triggering 0 polarity 1 [ 1.389108] Already setup the GSI :18 [ 1.412671] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 23065 usecs [ 1.412883] PCI: CLS 64 bytes, default 64 [ 1.413022] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.413142] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 1.413340] kvm_intel: VMX not supported by CPU 2 [ 1.413446] kvm_amd: SVM not supported by CPU 2 [ 1.413561] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c3d4ddab, max_idle_ns: 440795322762 ns [ 1.416132] clocksource: Switched to clocksource tsc [ 1.416248] Unpacking initramfs... [ 1.505803] Initialise system trusted keyrings [ 1.506101] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.506508] NFS: Registering the id_resolver key type [ 1.506637] Key type id_resolver registered [ 1.506739] Key type id_legacy registered [ 1.506973] 9p: Installing v9fs 9p2000 file system support [ 1.524634] Key type asymmetric registered [ 1.524739] Asymmetric key parser 'x509' registered [ 1.524898] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.525051] io scheduler mq-deadline registered [ 1.525154] io scheduler kyber registered [ 1.525634] xen: registering gsi 53 triggering 0 polarity 1 [ 1.525662] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.525948] xen: registering gsi 54 triggering 0 polarity 1 [ 1.525964] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.526348] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.526527] ACPI: button: Power Button [PWRB] [ 1.526671] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.527020] ACPI: button: Power Button [PWRF] [ 1.532016] xen:xen_evtchn: Event-channel device installed [ 1.532306] xen_pciback: backend is vpci [ 1.533118] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.533571] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.534360] hpet_acpi_add: no address or irqs in _CRS [ 1.534534] Non-volatile memory driver v1.3 [ 1.538529] loop: module loaded [ 1.545145] ahci 0000:00:11.0: version 3.0 [ 1.545260] xen: registering gsi 22 triggering 0 polarity 1 [ 1.545293] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.545429] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.545578] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.545687] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.546891] scsi host0: ahci [ 1.547240] scsi host1: ahci [ 1.547614] scsi host2: ahci [ 1.548016] scsi host3: ahci [ 1.548169] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 4 [ 1.548325] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 4 [ 1.548469] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 4 [ 1.548613] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 4 [ 1.549150] tun: Universal TUN/TAP device driver, 1.6 [ 1.549369] e100: Intel(R) PRO/100 Network Driver [ 1.549474] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.549593] sky2: driver version 1.30 [ 1.549747] xen_netfront: Initialising Xen virtual ethernet driver [ 1.550095] xen: registering gsi 16 triggering 0 polarity 1 [ 1.550103] Already setup the GSI :16 [ 1.550284] xen: registering gsi 17 triggering 0 polarity 1 [ 1.550295] Already setup the GSI :17 [ 1.550319] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.550596] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.550741] xen: registering gsi 19 triggering 0 polarity 1 [ 1.550750] Already setup the GSI :19 [ 1.550872] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.580314] Freeing initrd memory: 20940K [ 1.605389] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.605543] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.605698] usb usb1: Product: OHCI PCI host controller [ 1.605802] usb usb1: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.605908] usb usb1: SerialNumber: 0000:00:12.0 [ 1.606276] hub 1-0:1.0: USB hub found [ 1.606415] hub 1-0:1.0: 3 ports detected [ 1.606796] xen: registering gsi 16 triggering 0 polarity 1 [ 1.606804] Already setup the GSI :16 [ 1.606896] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.607224] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2 [ 1.607371] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.607539] ehci-pci 0000:00:12.2: debug port 1 [ 1.607792] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.613255] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.613431] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 1.613576] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.613740] usb usb2: Product: EHCI Host Controller [ 1.613843] usb usb2: Manufacturer: Linux 6.11.0+ ehci_hcd [ 1.613988] usb usb2: SerialNumber: 0000:00:12.2 [ 1.614283] hub 2-0:1.0: USB hub found [ 1.614394] hub 2-0:1.0: 6 ports detected [ 1.663307] hub 1-0:1.0: USB hub found [ 1.663430] hub 1-0:1.0: 3 ports detected [ 1.663726] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.663994] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 1.664139] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.664327] ehci-pci 0000:00:13.2: debug port 1 [ 1.664519] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 1.670314] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.670535] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 1.670681] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.670859] usb usb3: Product: EHCI Host Controller [ 1.670963] usb usb3: Manufacturer: Linux 6.11.0+ ehci_hcd [ 1.671068] usb usb3: SerialNumber: 0000:00:13.2 [ 1.671440] hub 3-0:1.0: USB hub found [ 1.671550] hub 3-0:1.0: 6 ports detected [ 1.671920] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.672194] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.672448] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 1.727406] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.727559] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.727706] usb usb4: Product: OHCI PCI host controller [ 1.727817] usb usb4: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.727922] usb usb4: SerialNumber: 0000:00:12.1 [ 1.728241] hub 4-0:1.0: USB hub found [ 1.728363] hub 4-0:1.0: 3 ports detected [ 1.728736] xen: registering gsi 18 triggering 0 polarity 1 [ 1.728742] Already setup the GSI :18 [ 1.728877] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.729083] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.729304] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 1.784322] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.784514] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.784654] usb usb5: Product: OHCI PCI host controller [ 1.784772] usb usb5: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.784877] usb usb5: SerialNumber: 0000:00:13.0 [ 1.785151] hub 5-0:1.0: USB hub found [ 1.785284] hub 5-0:1.0: 3 ports detected [ 1.785626] xen: registering gsi 18 triggering 0 polarity 1 [ 1.785632] Already setup the GSI :18 [ 1.785768] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.785946] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.786126] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 1.841437] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.841591] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.841731] usb usb6: Product: OHCI PCI host controller [ 1.841836] usb usb6: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.841941] usb usb6: SerialNumber: 0000:00:13.1 [ 1.842265] hub 6-0:1.0: USB hub found [ 1.842378] hub 6-0:1.0: 3 ports detected [ 1.842748] xen: registering gsi 18 triggering 0 polarity 1 [ 1.842754] Already setup the GSI :18 [ 1.842889] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.843109] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.843289] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 1.856298] ata4: SATA link down (SStatus 0 SControl 300) [ 1.856448] ata3: SATA link down (SStatus 0 SControl 300) [ 1.898379] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.898532] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.898673] usb usb7: Product: OHCI PCI host controller [ 1.898777] usb usb7: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.898882] usb usb7: SerialNumber: 0000:00:14.5 [ 1.899194] hub 7-0:1.0: USB hub found [ 1.899323] hub 7-0:1.0: 2 ports detected [ 1.899692] usbcore: registered new interface driver usblp [ 1.899821] usbcore: registered new interface driver usb-storage [ 1.900036] i8042: PNP: No PS/2 controller found. [ 1.900140] i8042: Probing ports directly. [ 1.903350] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.903460] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.903786] rtc_cmos 00:02: RTC can wake from S4 [ 1.904409] rtc_cmos 00:02: registered as rtc0 [ 1.904584] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 1.904735] device-mapper: uevent: version 1.0.3 [ 1.904931] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 1.905084] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.905259] hid: raw HID events driver (C) Jiri Kosina [ 1.905575] usbcore: registered new interface driver usbhid [ 1.905706] usbhid: USB HID core driver [ 1.906383] Initializing XFRM netlink socket [ 1.906501] NET: Registered PF_INET6 protocol family [ 1.907183] Segment Routing with IPv6 [ 1.907313] In-situ OAM (IOAM) with IPv6 [ 1.907451] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.907709] NET: Registered PF_PACKET protocol family [ 1.907839] 9pnet: Installing 9P2000 support [ 1.907962] Key type dns_resolver registered [ 1.908079] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.908641] IPI shorthand broadcast: enabled [ 1.913298] sched_clock: Marking stable (1882005903, 31199914)->(1917222291, -4016474) [ 1.913837] registered taskstats version 1 [ 1.913942] Loading compiled-in X.509 certificates [ 1.916060] PM: Magic number: 8:862:62 [ 1.916229] printk: legacy console [netcon0] enabled [ 1.916341] netconsole: network logging started [ 1.916585] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.927175] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.927686] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 1.929978] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 1.930236] ALSA device list: [ 1.930348] No soundcards found. [ 2.010270] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.010439] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.011139] ata2.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133 [ 2.011721] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.011856] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 2.012366] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.012689] ata2.00: configured for UDMA/133 [ 2.013962] ata1.00: configured for UDMA/133 [ 2.024324] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.024867] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.024901] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.025146] sd 0:0:0:0: [sda] Write Protect is off [ 2.025271] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.025297] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.025311] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5 [ 2.025507] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.026050] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.026087] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.026332] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 2.026453] sd 1:0:0:0: [sdb] Write Protect is off [ 2.026558] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.026580] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.026792] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 2.062991] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.065537] sda: sda1 sda2 < sda5 > [ 2.065943] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.067617] Freeing unused kernel image (initmem) memory: 2704K [ 2.067754] Write protecting the kernel read-only data: 24576k [ 2.079905] Freeing unused kernel image (rodata/data gap) memory: 1896K [ 2.151241] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.195996] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.196192] Run /init as init process [ 2.196370] with arguments: [ 2.196371] /init [ 2.196373] placeholder [ 2.196375] with environment: [ 2.196376] HOME=/ [ 2.196377] TERM=linux [ 2.310434] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.310593] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.310707] usb 6-2: Product: Hermon USB hidmouse Device [ 2.310813] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.317000] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.317409] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.321909] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.462742] e1000e: Intel(R) PRO/1000 Network Driver [ 2.462871] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.463094] xen: registering gsi 48 triggering 0 polarity 1 [ 2.463317] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.463864] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.493554] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.507215] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.550039] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e9:2a [ 2.550213] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.550415] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.550627] xen: registering gsi 47 triggering 0 polarity 1 [ 2.550654] xen: --> pirq=47 -> irq=47 (gsi=47) [ 2.550851] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.597314] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.641107] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e9:2b [ 2.641280] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.641480] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.643367] e1000e 0000:01:00.0 enx002590aee92a: renamed from eth0 [ 2.643910] e1000e 0000:02:00.0 enx002590aee92b: renamed from eth1 [ 2.665233] random: crng init done [ 3.329039] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.341938] EXT4-fs (dm-0): mounted filesystem c5c98def-5075-419b-be59-62bdca5f48f2 ro with ordered data mode. Quota mode: none. [ 7.627485] EXT4-fs (dm-0): re-mounted c5c98def-5075-419b-be59-62bdca5f48f2 r/w. Quota mode: none. [ 9.165752] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.185269] EXT4-fs (sda1): mounted filesystem cf4344f2-4d88-4812-abc7-506347968b1f r/w with ordered data mode. Quota mode: none. [ 9.258960] Adding 1949692k swap on /dev/mapper/pinot1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 10.798655] xenbr0: port 1(enx002590aee92a) entered blocking state [ 10.798834] xenbr0: port 1(enx002590aee92a) entered disabled state [ 10.798951] e1000e 0000:01:00.0 enx002590aee92a: entered allmulticast mode [ 10.799109] e1000e 0000:01:00.0 enx002590aee92a: entered promiscuous mode [ 14.064277] e1000e 0000:01:00.0 enx002590aee92a: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 14.064667] xenbr0: port 1(enx002590aee92a) entered blocking state [ 14.064794] xenbr0: port 1(enx002590aee92a) entered forwarding state