[ 0.000000] microcode: microcode updated early to revision 0x42e, date = 2019-03-14 [ 0.000000] Linux version 6.1.0-25-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.106-3 (2024-08-26) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007de2bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1800.027 MHz processor [ 0.000921] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000926] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000936] last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.001076] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001724] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved [ 0.001734] last_pfn = 0x7de2c max_arch_pfn = 0x400000000 [ 0.018541] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] [ 0.018566] Using GB pages for direct mapping [ 0.019079] RAMDISK: [mem 0x3310b000-0x3587cfff] [ 0.019087] ACPI: Early table checksum verification disabled [ 0.019091] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.019098] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019106] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019115] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.019121] ACPI: FACS 0x000000007E1D8080 000040 [ 0.019125] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.019130] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.019135] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.019140] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.019145] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.019151] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.019156] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.019161] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.019166] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.019171] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.019176] ACPI: DMAR 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.019182] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.019186] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.019188] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.019189] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.019191] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.019192] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.019194] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.019195] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.019197] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.019198] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.019199] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.019201] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.019202] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.019203] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.019205] ACPI: Reserving DMAR table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.019206] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.019276] No NUMA configuration found [ 0.019277] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] [ 0.019293] NODE_DATA(0) allocated [mem 0x27ffd3000-0x27fffdfff] [ 0.019754] Zone ranges: [ 0.019755] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.019758] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.019761] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.019763] Device empty [ 0.019764] Movable zone start for each node [ 0.019769] Early memory node ranges [ 0.019769] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.019772] node 0: [mem 0x0000000000100000-0x000000007de2bfff] [ 0.019774] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.019777] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.019785] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.019844] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.028077] On node 0, zone Normal: 8660 pages in unavailable ranges [ 0.028372] ACPI: PM-Timer IO Port: 0x408 [ 0.028384] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.028386] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.028388] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.028389] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.028401] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.028407] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.028411] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028414] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.028421] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028423] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.028429] TSC deadline timer available [ 0.028431] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.028453] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028456] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.028457] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.028459] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.028460] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.028462] PM: hibernation: Registered nosave memory: [mem 0x7de2c000-0x7debafff] [ 0.028464] PM: hibernation: Registered nosave memory: [mem 0x7debb000-0x7dfc3fff] [ 0.028465] PM: hibernation: Registered nosave memory: [mem 0x7dfc4000-0x7e1e0fff] [ 0.028466] PM: hibernation: Registered nosave memory: [mem 0x7e1e1000-0x7f36afff] [ 0.028467] PM: hibernation: Registered nosave memory: [mem 0x7f36b000-0x7f7fffff] [ 0.028469] PM: hibernation: Registered nosave memory: [mem 0x7f800000-0x7fffffff] [ 0.028470] PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff] [ 0.028471] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.028472] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff] [ 0.028473] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff] [ 0.028474] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.028477] [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.028479] Booting paravirtualized kernel on bare hardware [ 0.028482] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.035773] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.036167] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.036176] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.036180] pcpu-alloc: [0] 0 1 2 3 [ 0.036221] Fallback order for Node 0: 0 [ 0.036225] Built 1 zonelists, mobility grouping on. Total pages: 2055603 [ 0.036227] Policy zone: Normal [ 0.036229] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.036299] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64", will be passed to user space. [ 0.036313] random: crng init done [ 0.037356] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.037926] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.038014] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.038027] software IO TLB: area num 4. [ 0.078948] Memory: 2033060K/8353556K available (14342K kernel code, 2335K rwdata, 9072K rodata, 2796K init, 17396K bss, 305212K reserved, 0K cma-reserved) [ 0.079162] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.079184] Kernel/User page tables isolation: enabled [ 0.079238] ftrace: allocating 40246 entries in 158 pages [ 0.089594] ftrace: allocated 158 pages with 5 groups [ 0.090536] Dynamic Preempt: voluntary [ 0.090580] rcu: Preemptible hierarchical RCU implementation. [ 0.090581] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.090583] Trampoline variant of Tasks RCU enabled. [ 0.090584] Rude variant of Tasks RCU enabled. [ 0.090585] Tracing variant of Tasks RCU enabled. [ 0.090586] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.090587] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.098056] NR_IRQS: 524544, nr_irqs: 864, preallocated irqs: 16 [ 0.098257] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.102711] Console: colour VGA+ 80x25 [ 1.027155] printk: console [ttyS0] enabled [ 1.031362] ACPI: Core revision 20220331 [ 1.036009] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 1.045149] APIC: Switch to symmetric I/O mode setup [ 1.050132] DMAR: Host address width 46 [ 1.053979] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 1.059306] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de [ 1.067228] DMAR: RMRR base: 0x0000007de91000 end: 0x0000007de9dfff [ 1.073503] DMAR: ATSR flags: 0x0 [ 1.076824] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 1.083097] DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0 [ 1.089457] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0 [ 1.095810] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 1.101217] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 1.110352] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 1.115753] x2apic enabled [ 1.118481] Switched APIC routing to cluster x2apic. [ 1.123996] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.149146] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f24321924, max_idle_ns: 440795294040 ns [ 1.159661] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.05 BogoMIPS (lpj=7200108) [ 1.163693] CPU0: Thermal monitoring enabled (TM1) [ 1.167745] process: using mwait in idle threads [ 1.171662] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 1.175659] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 1.179662] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.183661] Spectre V2 : Mitigation: Retpolines [ 1.187659] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.191659] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.195659] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 1.199661] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.203660] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 1.207660] MDS: Mitigation: Clear CPU buffers [ 1.211659] MMIO Stale Data: Unknown: No mitigations [ 1.215665] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.219659] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.223659] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.227660] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.231659] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.260219] Freeing SMP alternatives memory: 36K [ 1.263660] pid_max: default: 32768 minimum: 301 [ 1.267694] LSM: Security Framework initializing [ 1.271678] landlock: Up and running. [ 1.275659] Yama: disabled by default; enable with sysctl kernel.yama.* [ 1.279692] AppArmor: AppArmor initialized [ 1.283661] TOMOYO Linux initialized [ 1.287666] LSM support for eBPF active [ 1.291705] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.295675] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.304223] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2403 v2 @ 1.80GHz (family: 0x6, model: 0x3e, stepping: 0x4) [ 1.307848] cblist_init_generic: Setting adjustable number of callback queues. [ 1.311661] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.315690] cblist_init_generic: Setting adjustable number of callback queues. [ 1.319660] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.323682] cblist_init_generic: Setting adjustable number of callback queues. [ 1.327660] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.331681] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 1.335661] ... version: 3 [ 1.339659] ... bit width: 48 [ 1.343659] ... generic registers: 8 [ 1.347659] ... value mask: 0000ffffffffffff [ 1.351659] ... max period: 00007fffffffffff [ 1.355660] ... fixed-purpose events: 3 [ 1.359659] ... event mask: 00000007000000ff [ 1.363895] signal: max sigframe size: 1776 [ 1.367684] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 1.371691] rcu: Hierarchical SRCU implementation. [ 1.375660] rcu: Max phase no-delay instances is 1000. [ 1.380332] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.383757] smp: Bringing up secondary CPUs ... [ 1.387809] x86: Booting SMP configuration: [ 1.391665] .... node #0, CPUs: #1 #2 #3 [ 1.407017] smp: Brought up 1 node, 4 CPUs [ 1.411661] smpboot: Max logical packages: 1 [ 1.415660] smpboot: Total of 4 processors activated (14400.21 BogoMIPS) [ 1.439798] node 0 deferred pages initialised in 20ms [ 1.444124] devtmpfs: initialized [ 1.447739] x86/mm: Memory block size: 128MB [ 1.452704] ACPI: PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 1.455711] ACPI: PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 1.459815] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.463672] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.467720] pinctrl core: initialized pinctrl subsystem [ 1.472554] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.475941] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 1.479820] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.483817] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.487669] audit: initializing netlink subsys (disabled) [ 1.491675] audit: type=2000 audit(1727198586.404:1): state=initialized audit_enabled=0 res=1 [ 1.491812] thermal_sys: Registered thermal governor 'fair_share' [ 1.495663] thermal_sys: Registered thermal governor 'bang_bang' [ 1.499660] thermal_sys: Registered thermal governor 'step_wise' [ 1.503660] thermal_sys: Registered thermal governor 'user_space' [ 1.507660] thermal_sys: Registered thermal governor 'power_allocator' [ 1.511676] cpuidle: using governor ladder [ 1.519664] cpuidle: using governor menu [ 1.523634] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 1.523661] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.527762] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 1.531662] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 1.535669] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 1.540082] PCI: Using configuration type 1 for base access [ 1.543758] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 1.548978] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.551722] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 1.555664] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 1.559660] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 1.563659] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 1.567812] ACPI: Added _OSI(Module Device) [ 1.571672] ACPI: Added _OSI(Processor Device) [ 1.575660] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.579660] ACPI: Added _OSI(Processor Aggregator Device) [ 1.699932] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.726835] ACPI: Interpreter enabled [ 1.727681] ACPI: PM: (supports S0 S1 S4 S5) [ 1.731660] ACPI: Using IOAPIC for interrupt routing [ 1.735770] HEST: Table parsing has been initialized. [ 1.739781] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 1.743664] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.747659] PCI: Using E820 reservations for host bridge windows [ 1.752204] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.755822] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PRAD], AE_NOT_FOUND (20220331/psargs-330) [ 1.759663] ACPI Error: Aborting method \_GPE._L24 due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 1.763669] ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_L24] (20220331/evgpe-511) [ 1.765783] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.767658] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.783754] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR] [ 1.791812] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability] [ 1.799660] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.808017] PCI host bridge to bus 0000:00 [ 1.811662] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.815660] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.823663] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.831660] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.839661] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 1.843660] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.851660] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.859660] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.867661] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.871691] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.879743] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.883780] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.891759] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.899829] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.903758] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.911823] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.915698] pci 0000:00:03.0: enabling Extended Tags [ 1.919725] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.927808] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.931677] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.939799] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.947679] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.951803] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 1.959676] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 1.967795] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 1.971676] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 1.979799] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 1.983676] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 1.991797] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 1.999676] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 2.003794] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 2.011676] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 2.019794] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 2.023676] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 2.031799] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 2.035783] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 2.043783] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 2.047672] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 2.055812] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 2.063780] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 2.067807] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 2.075681] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 2.079732] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 2.087750] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 2.091678] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 2.099728] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 2.107763] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 2.111676] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 2.119751] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.123765] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 2.131759] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.135688] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 2.143661] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 2.147761] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 2.155759] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.159684] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 2.163661] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 2.171775] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 2.179681] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 2.183751] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.191767] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.195809] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 2.203889] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 2.207673] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 2.215666] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 2.219666] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 2.227666] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 2.231666] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 2.235667] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 2.243704] pci 0000:00:1f.2: PME# supported from D3hot [ 2.247750] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 2.255678] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 2.259681] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 2.267735] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 2.271680] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 2.279824] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.283709] pci 0000:00:01.1: PCI bridge to [bus 02] [ 2.291709] pci 0000:00:03.0: PCI bridge to [bus 03] [ 2.295736] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 2.299682] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 2.307674] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 2.315669] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 2.319686] pci 0000:04:00.0: enabling Extended Tags [ 2.327769] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 2.331660] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 2.343914] pci 0000:00:11.0: PCI bridge to [bus 04] [ 2.347663] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 2.355668] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 2.363759] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 2.367695] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 2.375697] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 2.379678] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 2.387846] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 2.391873] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 2.399663] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 2.403662] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 2.411771] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 2.415695] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 2.423697] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 2.427678] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 2.435845] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 2.443869] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 2.447663] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 2.451665] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 2.459682] pci_bus 0000:07: extended config space not accessible [ 2.467689] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 2.471676] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 2.479668] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 2.483668] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 2.491707] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.499764] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 2.507664] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 2.511664] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 2.519660] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 2.531660] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 2.539660] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 2.547660] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 2.555660] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 2.563660] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 2.575662] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 2.583660] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 2.592436] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 2.599664] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.607678] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 2.615660] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 2.623725] PCI host bridge to bus 0000:ff [ 2.627661] pci_bus 0000:ff: root bus resource [bus ff] [ 2.635674] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 2.639740] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 2.647730] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 2.651720] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 2.659719] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 2.663725] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 2.671722] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 2.675717] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 2.683719] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 2.687722] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 2.695727] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 2.699723] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 2.707721] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 2.715722] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 2.719730] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 2.727746] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 2.731742] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 2.739746] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 2.743743] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 2.751742] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 2.755743] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 2.763744] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 2.767742] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 2.775742] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 2.779744] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 2.787748] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 2.791742] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 2.799743] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 2.803741] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 2.811718] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 2.815721] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 2.823722] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 2.827722] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 2.835722] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 2.839717] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 2.847882] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 2.851713] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 2.859711] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 2.863710] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 2.871711] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 2.875710] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 2.883710] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 2.887710] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 2.897306] iommu: Default domain type: Translated [ 2.903662] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.907753] pps_core: LinuxPPS API ver. 1 registered [ 2.911697] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.923673] PTP clock support registered [ 2.927694] EDAC MC: Ver: 3.0.0 [ 2.931947] NetLabel: Initializing [ 2.935351] NetLabel: domain hash size = 128 [ 2.939662] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 2.943682] NetLabel: unlabeled traffic allowed by default [ 2.947660] PCI: Using ACPI for IRQ routing [ 2.958629] PCI: pci_cache_line_size set to 64 bytes [ 2.958756] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] [ 2.958759] e820: reserve RAM buffer [mem 0x7de2c000-0x7fffffff] [ 2.959687] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 2.963658] pci 0000:07:01.0: vgaarb: bridge control possible [ 2.963658] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 2.979667] vgaarb: loaded [ 2.984375] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 2.991660] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 2.999660] clocksource: Switched to clocksource tsc-early [ 3.005343] VFS: Disk quotas dquot_6.6.0 [ 3.009289] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.016366] AppArmor: AppArmor Filesystem Enabled [ 3.021100] pnp: PnP ACPI init [ 3.024322] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 3.030937] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 3.037547] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 3.044158] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 3.050905] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 3.058012] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 3.063937] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 3.071218] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 3.077336] pnp 00:07: [dma 0 disabled] [ 3.077579] pnp 00:08: [dma 0 disabled] [ 3.077864] system 00:09: [io 0x0400-0x0453] has been reserved [ 3.083786] system 00:09: [io 0x0458-0x047f] has been reserved [ 3.089703] system 00:09: [io 0x1180-0x119f] has been reserved [ 3.095622] system 00:09: [io 0x0500-0x057f] has been reserved [ 3.101541] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 3.108156] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 3.115113] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 3.121827] system 00:0a: [io 0x0454-0x0457] has been reserved [ 3.128030] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 3.135273] pnp: PnP ACPI: found 12 devices [ 3.145965] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.154922] NET: Registered PF_INET protocol family [ 3.159991] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 3.170321] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 3.178893] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.186730] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 3.195031] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 3.202827] TCP: Hash tables configured (established 65536 bind 65536) [ 3.209457] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 3.217004] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.223834] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.231123] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.236791] NET: Registered PF_XDP protocol family [ 3.241603] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.246584] pci 0000:00:01.1: PCI bridge to [bus 02] [ 3.251555] pci 0000:00:03.0: PCI bridge to [bus 03] [ 3.256532] pci 0000:00:11.0: PCI bridge to [bus 04] [ 3.261498] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 3.267596] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.275345] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 3.280313] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 3.286408] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 3.293198] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 3.298166] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 3.304261] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 3.311052] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 3.316020] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 3.322806] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.330547] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 3.336722] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 3.342902] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 3.349081] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 3.355261] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.362132] pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.369005] pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.375964] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.382924] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 3.388496] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.395715] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 3.401287] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 3.407553] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 3.413125] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 3.419391] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 3.425659] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.432877] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 3.439055] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 3.445236] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 3.451413] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 3.457593] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.464465] pci_bus 0000:07: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.471338] pci_bus 0000:07: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.478299] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.485352] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 3.513484] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 20571 usecs [ 3.541471] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 20089 usecs [ 3.548978] PCI: CLS 64 bytes, default 64 [ 3.553028] DMAR: No SATC found [ 3.553059] Trying to unpack rootfs image as initramfs... [ 3.556177] DMAR: dmar0: Using Queued invalidation [ 3.556257] pci 0000:00:00.0: Adding to iommu group 0 [ 3.571488] pci 0000:00:01.0: Adding to iommu group 1 [ 3.576562] pci 0000:00:01.1: Adding to iommu group 2 [ 3.581646] pci 0000:00:03.0: Adding to iommu group 3 [ 3.586732] pci 0000:00:04.0: Adding to iommu group 4 [ 3.591812] pci 0000:00:04.1: Adding to iommu group 5 [ 3.596893] pci 0000:00:04.2: Adding to iommu group 6 [ 3.601970] pci 0000:00:04.3: Adding to iommu group 7 [ 3.607050] pci 0000:00:04.4: Adding to iommu group 8 [ 3.612126] pci 0000:00:04.5: Adding to iommu group 9 [ 3.617207] pci 0000:00:04.6: Adding to iommu group 10 [ 3.622371] pci 0000:00:04.7: Adding to iommu group 11 [ 3.627539] pci 0000:00:05.0: Adding to iommu group 12 [ 3.632712] pci 0000:00:05.2: Adding to iommu group 13 [ 3.637873] pci 0000:00:05.4: Adding to iommu group 14 [ 3.643040] pci 0000:00:11.0: Adding to iommu group 15 [ 3.648231] pci 0000:00:16.0: Adding to iommu group 16 [ 3.653402] pci 0000:00:16.1: Adding to iommu group 16 [ 3.658577] pci 0000:00:1a.0: Adding to iommu group 17 [ 3.663751] pci 0000:00:1c.0: Adding to iommu group 18 [ 3.668927] pci 0000:00:1c.1: Adding to iommu group 19 [ 3.674092] pci 0000:00:1d.0: Adding to iommu group 20 [ 3.679259] pci 0000:00:1e.0: Adding to iommu group 21 [ 3.684472] pci 0000:00:1f.0: Adding to iommu group 22 [ 3.689638] pci 0000:00:1f.2: Adding to iommu group 22 [ 3.694808] pci 0000:00:1f.3: Adding to iommu group 22 [ 3.699974] pci 0000:00:1f.6: Adding to iommu group 22 [ 3.705153] pci 0000:04:00.0: Adding to iommu group 23 [ 3.710318] pci 0000:05:00.0: Adding to iommu group 24 [ 3.715483] pci 0000:06:00.0: Adding to iommu group 25 [ 3.720632] pci 0000:07:01.0: Adding to iommu group 21 [ 3.725819] pci 0000:ff:08.0: Adding to iommu group 26 [ 3.730997] pci 0000:ff:09.0: Adding to iommu group 27 [ 3.736203] pci 0000:ff:0a.0: Adding to iommu group 28 [ 3.741379] pci 0000:ff:0a.1: Adding to iommu group 28 [ 3.746549] pci 0000:ff:0a.2: Adding to iommu group 28 [ 3.751720] pci 0000:ff:0a.3: Adding to iommu group 28 [ 3.756908] pci 0000:ff:0b.0: Adding to iommu group 29 [ 3.762078] pci 0000:ff:0b.3: Adding to iommu group 29 [ 3.767261] pci 0000:ff:0c.0: Adding to iommu group 30 [ 3.772427] pci 0000:ff:0c.1: Adding to iommu group 30 [ 3.777624] pci 0000:ff:0d.0: Adding to iommu group 31 [ 3.782790] pci 0000:ff:0d.1: Adding to iommu group 31 [ 3.787974] pci 0000:ff:0e.0: Adding to iommu group 32 [ 3.793151] pci 0000:ff:0e.1: Adding to iommu group 32 [ 3.798318] pci 0000:ff:0f.0: Adding to iommu group 33 [ 3.803487] pci 0000:ff:0f.1: Adding to iommu group 34 [ 3.808651] pci 0000:ff:0f.2: Adding to iommu group 35 [ 3.813815] pci 0000:ff:0f.3: Adding to iommu group 36 [ 3.818979] pci 0000:ff:0f.4: Adding to iommu group 37 [ 3.824146] pci 0000:ff:0f.5: Adding to iommu group 38 [ 3.829312] pci 0000:ff:10.0: Adding to iommu group 39 [ 3.834475] pci 0000:ff:10.1: Adding to iommu group 40 [ 3.839640] pci 0000:ff:10.2: Adding to iommu group 41 [ 3.844807] pci 0000:ff:10.3: Adding to iommu group 42 [ 3.849973] pci 0000:ff:10.4: Adding to iommu group 43 [ 3.855147] pci 0000:ff:10.5: Adding to iommu group 44 [ 3.860310] pci 0000:ff:10.6: Adding to iommu group 45 [ 3.865477] pci 0000:ff:10.7: Adding to iommu group 46 [ 3.870685] pci 0000:ff:13.0: Adding to iommu group 47 [ 3.875855] pci 0000:ff:13.1: Adding to iommu group 47 [ 3.881028] pci 0000:ff:13.4: Adding to iommu group 47 [ 3.886206] pci 0000:ff:13.5: Adding to iommu group 47 [ 3.891409] pci 0000:ff:16.0: Adding to iommu group 48 [ 3.896587] pci 0000:ff:16.1: Adding to iommu group 48 [ 3.901772] pci 0000:ff:16.2: Adding to iommu group 48 [ 3.910812] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 3.917264] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.923707] software IO TLB: mapped [mem 0x0000000079e2c000-0x000000007de2c000] (64MB) [ 3.932216] Initialise system trusted keyrings [ 3.936679] Key type blacklist registered [ 3.940766] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 3.949050] zbud: loaded [ 3.951921] integrity: Platform Keyring initialized [ 3.956814] integrity: Machine keyring initialized [ 3.961606] Key type asymmetric registered [ 3.965703] Asymmetric key parser 'x509' registered [ 3.999555] Freeing initrd memory: 40392K [ 4.010933] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 4.016716] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 4.024155] io scheduler mq-deadline registered [ 4.031115] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.037932] Monitor-Mwait will be used to enter C-1 state [ 4.037945] Monitor-Mwait will be used to enter C-2 state [ 4.037952] ACPI: \_SB_.SCK0.C000: Found 2 idle states [ 4.047991] ERST: Error Record Serialization Table (ERST) support is initialized. [ 4.055485] pstore: Registered erst as persistent store backend [ 4.061541] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.067980] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.076078] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.084299] Linux agpgart interface v0.103 [ 4.088544] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 4.097684] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 4.104559] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 4.114391] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.119366] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.124617] mousedev: PS/2 mouse device common for all mice [ 4.130233] rtc_cmos 00:02: RTC can wake from S4 [ 4.135127] rtc_cmos 00:02: registered as rtc0 [ 4.139616] rtc_cmos 00:02: setting system clock to 2024-09-24T17:23:11 UTC (1727198591) [ 4.147750] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.155566] intel_pstate: Intel P-state driver initializing [ 4.161468] ledtrig-cpu: registered to indicate activity on CPUs [ 4.185917] NET: Registered PF_INET6 protocol family [ 4.198121] Segment Routing with IPv6 [ 4.201805] In-situ OAM (IOAM) with IPv6 [ 4.205766] mip6: Mobile IPv6 [ 4.208737] NET: Registered PF_PACKET protocol family [ 4.213872] mpls_gso: MPLS GSO support [ 4.218132] microcode: sig=0x306e4, pf=0x8, revision=0x42e [ 4.223677] microcode: Microcode Update Driver: v2.2. [ 4.223685] IPI shorthand broadcast: enabled [ 4.233043] sched_clock: Marking stable (3243641033, 989368964)->(4634419442, -401409445) [ 4.241480] registered taskstats version 1 [ 4.245592] Loading compiled-in X.509 certificates [ 4.290912] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.299639] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 4.310362] zswap: loaded using pool lzo/zbud [ 4.314967] Key type .fscrypt registered [ 4.318900] Key type fscrypt-provisioning registered [ 4.324161] pstore: Using crash dump compression: deflate [ 4.336694] Key type encrypted registered [ 4.340716] AppArmor: AppArmor sha1 policy hashing enabled [ 4.346219] ima: No TPM chip found, activating TPM-bypass! [ 4.351709] ima: Allocated hash algorithm: sha256 [ 4.356426] ima: No architecture policies found [ 4.360967] evm: Initialising EVM extended attributes: [ 4.366102] evm: security.selinux [ 4.369420] evm: security.SMACK64 (disabled) [ 4.373693] evm: security.SMACK64EXEC (disabled) [ 4.378312] evm: security.SMACK64TRANSMUTE (disabled) [ 4.383366] evm: security.SMACK64MMAP (disabled) [ 4.387984] evm: security.apparmor [ 4.391389] evm: security.ima [ 4.394364] evm: security.capability [ 4.397943] evm: HMAC attrs: 0x1 [ 4.574415] clk: Disabling unused clocks [ 4.580155] Freeing unused decrypted memory: 2036K [ 4.585701] Freeing unused kernel image (initmem) memory: 2796K [ 4.591723] Write protecting the kernel read-only data: 26624k [ 4.598308] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 4.605303] Freeing unused kernel image (rodata/data gap) memory: 1168K [ 4.698470] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.704911] x86/mm: Checking user space page tables [ 4.785201] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.791642] Run /init as init process [ 4.795312] with arguments: [ 4.795314] /init [ 4.795315] with environment: [ 4.795316] HOME=/ [ 4.795318] TERM=linux [ 4.795319] BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 [ 4.957384] tsc: Refined TSC clocksource calibration: 1799.999 MHz [ 4.963623] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 4.974088] clocksource: Switched to clocksource tsc [ 5.028101] SCSI subsystem initialized [ 5.035684] ACPI: bus type USB registered [ 5.039781] usbcore: registered new interface driver usbfs [ 5.040086] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 5.051231] usbcore: registered new interface driver hub [ 5.056655] usbcore: registered new device driver usb [ 5.061809] i2c i2c-0: 1/6 memory slots populated (from DMI) [ 5.067477] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 5.092385] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.092605] libata version 3.00 loaded. [ 5.097644] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.105066] ehci-pci 0000:00:1a.0: debug port 2 [ 5.113545] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 5.119295] e1000e: Intel(R) PRO/1000 Network Driver [ 5.124300] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 5.131039] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.133398] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.146168] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.146463] ahci 0000:00:1f.2: version 3.0 [ 5.154434] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.161658] usb usb1: Product: EHCI Host Controller [ 5.166534] usb usb1: Manufacturer: Linux 6.1.0-25-amd64 ehci_hcd [ 5.172629] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.173456] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 5.177440] hub 1-0:1.0: USB hub found [ 5.185428] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 5.189180] hub 1-0:1.0: 2 ports detected [ 5.200342] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 5.201536] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.213972] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.221428] ehci-pci 0000:00:1d.0: debug port 2 [ 5.226533] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 5.229930] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 5.233001] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 5.257423] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.262796] scsi host0: ahci [ 5.262880] isci 0000:04:00.0: OEM parameter table found in OROM [ 5.262885] isci 0000:04:00.0: OEM SAS parameters (version: 1.0) loaded (platform) [ 5.263460] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.265712] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a6 [ 5.265717] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 5.265798] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.266037] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.266726] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 5.269746] scsi host2: ahci [ 5.272287] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.272290] usb usb2: Product: EHCI Host Controller [ 5.272291] usb usb2: Manufacturer: Linux 6.1.0-25-amd64 ehci_hcd [ 5.272293] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.272410] scsi host3: ahci [ 5.272794] scsi host4: ahci [ 5.273104] scsi host5: ahci [ 5.273409] scsi host6: ahci [ 5.273469] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 32 [ 5.273474] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 32 [ 5.273477] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 32 [ 5.273479] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 32 [ 5.273482] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 32 [ 5.273484] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 32 [ 5.282623] scsi host1: isci [ 5.288295] hub 2-0:1.0: USB hub found [ 5.327685] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 5.330343] hub 2-0:1.0: 2 ports detected [ 5.390755] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a7 [ 5.435138] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 5.442099] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.461433] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.588456] ata6: SATA link down (SStatus 0 SControl 300) [ 5.593887] ata2: SATA link down (SStatus 0 SControl 300) [ 5.599318] ata5: SATA link down (SStatus 0 SControl 300) [ 5.604750] ata4: SATA link down (SStatus 0 SControl 300) [ 5.610187] ata3: SATA link down (SStatus 0 SControl 300) [ 5.615614] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.622615] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 5.629727] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.629760] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.644885] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.652233] ata1.00: configured for UDMA/133 [ 5.652490] hub 1-1:1.0: USB hub found [ 5.656566] scsi: waiting for bus probes to complete ... [ 5.660282] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.672208] hub 1-1:1.0: 6 ports detected [ 5.721656] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 5.733106] e1000e 0000:05:00.0 enx002590eb25a6: renamed from eth0 [ 5.763966] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.765851] e1000e 0000:06:00.0 enx002590eb25a7: renamed from eth1 [ 5.771670] sd 0:0:0:0: [sda] Write Protect is off [ 5.782633] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.782666] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.791747] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 5.814007] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.822252] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.829717] hub 2-1:1.0: USB hub found [ 5.833548] sda: sda1 sda2 < sda5 > [ 5.833646] hub 2-1:1.0: 8 ports detected [ 5.837453] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.969438] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 6.091138] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 6.099530] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.106852] usb 1-1.1: Product: Hermon USB hidmouse Device [ 6.112340] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 6.129728] hid: raw HID events driver (C) Jiri Kosina [ 6.140809] usbcore: registered new interface driver usbhid [ 6.146414] usbhid: USB HID core driver [ 6.153201] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input3 [ 6.168101] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 6.183138] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input4 [ 6.183301] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.210030] device-mapper: uevent: version 1.0.3 [ 6.214751] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 6.329528] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 6.792360] PM: Image not found (code -22) [ 7.168539] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 7.180094] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 7.385147] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 9.045103] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 9.069939] ACPI: button: Power Button [PWRB] [ 9.074431] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 9.082005] ACPI: button: Power Button [PWRF] [ 9.233039] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 9.304882] IPMI message handler: version 39.2 [ 9.309769] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.317543] dca service started, version 1.12.1 [ 9.381761] ipmi device interface [ 9.404017] iTCO_vendor_support: vendor-support=0 [ 9.449343] ipmi_si: IPMI System Interface driver [ 9.454109] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 9.460473] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 9.467702] ipmi_si: Adding SMBIOS-specified kcs state machine [ 9.473598] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 9.479644] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 9.514471] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 9.524380] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 9.560180] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 9.568908] ipmi_si: Adding ACPI-specified kcs state machine [ 9.574714] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 9.589617] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 9.611321] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 9.619300] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 9.625084] RAPL PMU: hw unit of domain package 2^-16 Joules [ 9.630779] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 9.684595] cryptd: max_cpu_qlen set to 1000 [ 9.763046] ACPI: bus type drm_connector registered [ 9.860743] AVX version of gcm_enc/dec engaged. [ 9.865355] AES CTR mode by8 optimization enabled [ 9.869403] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 9.978561] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x0703, dev_id: 0x20) [ 10.019474] mgag200 0000:07:01.0: vgaarb: deactivate vga console [ 10.026453] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 10.030566] Console: switching to colour dummy device 80x25 [ 10.047881] [drm] Initialized mgag200 1.0.0 20110418 for 0000:07:01.0 on minor 0 [ 10.057089] fbcon: mgag200drmfb (fb0) is primary device [ 10.134013] ipmi_ssif: IPMI SSIF Interface driver [ 10.429648] Console: switching to colour frame buffer device 128x48 [ 10.512721] mgag200 0000:07:01.0: [drm] fb0: mgag200drmfb frame buffer device [ 10.747390] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.747413] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.747419] EDAC sbridge: Seeking for: PCI ID 8086:0e60 [ 10.747425] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.747431] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.747434] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.747440] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.747442] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.747448] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.747451] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.747457] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.747459] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.747465] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.747468] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.747474] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.747476] EDAC sbridge: Seeking for: PCI ID 8086:0e68 [ 10.747482] EDAC sbridge: Seeking for: PCI ID 8086:0e79 [ 10.747487] EDAC sbridge: Seeking for: PCI ID 8086:0e6a [ 10.747493] EDAC sbridge: Seeking for: PCI ID 8086:0e6b [ 10.747498] EDAC sbridge: Seeking for: PCI ID 8086:0e6c [ 10.747504] EDAC sbridge: Seeking for: PCI ID 8086:0e6d [ 10.747509] EDAC sbridge: Seeking for: PCI ID 8086:0eb8 [ 10.747515] EDAC sbridge: Seeking for: PCI ID 8086:0ebc [ 10.747520] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.747527] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.747528] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.747535] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.747537] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.747544] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.747644] EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT) [ 10.758702] EDAC sbridge: Ver: 1.1.2 [ 10.855692] intel_rapl_common: Found RAPL domain package [ 10.861024] intel_rapl_common: Found RAPL domain core [ 10.866083] intel_rapl_common: Found RAPL domain dram [ 11.958724] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 13.009615] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 13.041338] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 13.098168] Adding 1949692k swap on /dev/mapper/fiano1--vg-swap_1. Priority:-2 extents:1 across:1949692k FS [ 13.671616] audit: type=1400 audit(1727198600.564:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1067 comm="apparmor_parser" [ 13.687685] audit: type=1400 audit(1727198600.576:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1066 comm="apparmor_parser" [ 13.702718] audit: type=1400 audit(1727198600.580:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1067 comm="apparmor_parser" [ 13.729816] audit: type=1400 audit(1727198600.624:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1069 comm="apparmor_parser" [ 13.744942] audit: type=1400 audit(1727198600.624:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1069 comm="apparmor_parser" [ 13.759881] audit: type=1400 audit(1727198600.624:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1069 comm="apparmor_parser" [ 13.923329] audit: type=1400 audit(1727198600.816:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=1075 comm="apparmor_parser" [ 13.970672] audit: type=1400 audit(1727198600.864:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1068 comm="apparmor_parser" [ 13.988654] audit: type=1400 audit(1727198600.864:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1068 comm="apparmor_parser" [ 14.006106] audit: type=1400 audit(1727198600.868:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1068 comm="apparmor_parser" [ 17.182479] e1000e 0000:05:00.0 enx002590eb25a6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 17.192241] IPv6: ADDRCONF(NETDEV_CHANGE): enx002590eb25a6: link becomes ready