[ 0.000000] Linux version 6.1.111+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Mon Sep 23 18:50:36 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/godello1--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] Xen: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020060fff] usable [ 0.000000] Xen: [mem 0x000000009573f000-0x0000000095bbefff] reserved [ 0.000000] Xen: [mem 0x0000000095bbf000-0x0000000095fbefff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000095fbf000-0x0000000095ffefff] ACPI data [ 0.000000] Xen: [mem 0x0000000096000000-0x000000009fffffff] reserved [ 0.000000] Xen: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] Xen: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed90fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. PowerEdge R220/081N4V, BIOS 1.1.4 05/06/2014 [ 0.000000] Hypervisor detected: Xen PV [ 0.000467] tsc: Detected 3092.838 MHz processor [ 0.000789] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000793] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000799] last_pfn = 0x20061 max_arch_pfn = 0x400000000 [ 0.000801] Disabled [ 0.000802] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000806] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000849] Kernel/User page tables isolation: disabled on XEN PV. [ 0.021174] RAMDISK: [mem 0x04000000-0x05424fff] [ 0.021188] ACPI: Early table checksum verification disabled [ 0.022862] ACPI: RSDP 0x00000000000FE020 000024 (v02 DELL ) [ 0.022875] ACPI: XSDT 0x0000000095FCF188 0000E4 (v01 DELL PE_SC3 00000001 01000013) [ 0.022941] ACPI: FACP 0x0000000095FF7000 00010C (v05 DELL PE_SC3 00000001 DELL 00040000) [ 0.023025] ACPI: DSDT 0x0000000095FDF000 012335 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.023040] ACPI: FACS 0x0000000095FBD000 000040 [ 0.023056] ACPI: UEFI 0x0000000095FFD000 000236 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023069] ACPI: UEFI 0x0000000095FFC000 000042 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.023083] ACPI: ASF! 0x0000000095FFB000 0000A5 (v32 DELL PE_SC3 00000001 DELL 00040000) [ 0.023096] ACPI: ASPT 0x0000000095FFA000 000034 (v07 DELL PE_SC3 00000001 DELL 00040000) [ 0.023111] ACPI: BOOT 0x0000000095FF9000 000028 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023125] ACPI: DBGP 0x0000000095FF8000 000034 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023138] ACPI: HPET 0x0000000095FF6000 000038 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023152] ACPI: APIC 0x0000000095FF5000 000092 (v03 DELL PE_SC3 00000001 DELL 00040000) [ 0.023164] ACPI: MCFG 0x0000000095FF4000 00003C (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023179] ACPI: SLIC 0x0000000095FF3000 000176 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023193] ACPI: SSDT 0x0000000095FDC000 002028 (v01 DELL PE_SC3 00001000 DELL 00040000) [ 0.023206] ACPI: SPMI 0x0000000095FDA000 000040 (v05 DELL PE_SC3 00000001 DELL 00040000) [ 0.023219] ACPI: SSDT 0x0000000095FD9000 000533 (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.023233] ACPI: SSDT 0x0000000095FD8000 000ACE (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.023247] ACPI: SSDT 0x0000000095FD4000 003492 (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.023261] ACPI: SPCR 0x0000000095FF2000 000050 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023275] ACPI: RMAD 0x0000000095FD3000 000080 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023288] ACPI: SSDT 0x0000000095FD2000 000514 (v01 DELL PE_SC3 00001000 DELL 00040000) [ 0.023302] ACPI: FPDT 0x0000000095FD1000 000044 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023315] ACPI: HEST 0x0000000095FD0000 0000A8 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023329] ACPI: ERST 0x0000000095FCE000 000230 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023343] ACPI: BERT 0x0000000095FCD000 000030 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023356] ACPI: EINJ 0x0000000095FCC000 000150 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023363] ACPI: Reserving FACP table memory at [mem 0x95ff7000-0x95ff710b] [ 0.023365] ACPI: Reserving DSDT table memory at [mem 0x95fdf000-0x95ff1334] [ 0.023366] ACPI: Reserving FACS table memory at [mem 0x95fbd000-0x95fbd03f] [ 0.023367] ACPI: Reserving UEFI table memory at [mem 0x95ffd000-0x95ffd235] [ 0.023367] ACPI: Reserving UEFI table memory at [mem 0x95ffc000-0x95ffc041] [ 0.023368] ACPI: Reserving ASF! table memory at [mem 0x95ffb000-0x95ffb0a4] [ 0.023369] ACPI: Reserving ASPT table memory at [mem 0x95ffa000-0x95ffa033] [ 0.023370] ACPI: Reserving BOOT table memory at [mem 0x95ff9000-0x95ff9027] [ 0.023371] ACPI: Reserving DBGP table memory at [mem 0x95ff8000-0x95ff8033] [ 0.023372] ACPI: Reserving HPET table memory at [mem 0x95ff6000-0x95ff6037] [ 0.023372] ACPI: Reserving APIC table memory at [mem 0x95ff5000-0x95ff5091] [ 0.023373] ACPI: Reserving MCFG table memory at [mem 0x95ff4000-0x95ff403b] [ 0.023374] ACPI: Reserving SLIC table memory at [mem 0x95ff3000-0x95ff3175] [ 0.023374] ACPI: Reserving SSDT table memory at [mem 0x95fdc000-0x95fde027] [ 0.023375] ACPI: Reserving SPMI table memory at [mem 0x95fda000-0x95fda03f] [ 0.023376] ACPI: Reserving SSDT table memory at [mem 0x95fd9000-0x95fd9532] [ 0.023376] ACPI: Reserving SSDT table memory at [mem 0x95fd8000-0x95fd8acd] [ 0.023377] ACPI: Reserving SSDT table memory at [mem 0x95fd4000-0x95fd7491] [ 0.023378] ACPI: Reserving SPCR table memory at [mem 0x95ff2000-0x95ff204f] [ 0.023379] ACPI: Reserving RMAD table memory at [mem 0x95fd3000-0x95fd307f] [ 0.023380] ACPI: Reserving SSDT table memory at [mem 0x95fd2000-0x95fd2513] [ 0.023380] ACPI: Reserving FPDT table memory at [mem 0x95fd1000-0x95fd1043] [ 0.023381] ACPI: Reserving HEST table memory at [mem 0x95fd0000-0x95fd00a7] [ 0.023382] ACPI: Reserving ERST table memory at [mem 0x95fce000-0x95fce22f] [ 0.023383] ACPI: Reserving BERT table memory at [mem 0x95fcd000-0x95fcd02f] [ 0.023383] ACPI: Reserving EINJ table memory at [mem 0x95fcc000-0x95fcc14f] [ 0.023436] Setting APIC routing to Xen PV. [ 0.026342] Zone ranges: [ 0.026344] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.026347] DMA32 [mem 0x0000000001000000-0x0000000020060fff] [ 0.026348] Normal empty [ 0.026349] Movable zone start for each node [ 0.026350] Early memory node ranges [ 0.026350] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.026352] node 0: [mem 0x0000000000100000-0x0000000020060fff] [ 0.026354] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020060fff] [ 0.026362] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.026442] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.029855] On node 0, zone DMA32: 32671 pages in unavailable ranges [ 0.029861] p2m virtual area at (____ptrval____), size is 40000000 [ 0.164366] Remapped 97 page(s) [ 0.164869] ACPI: PM-Timer IO Port: 0x1808 [ 0.164925] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.164959] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.164973] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.164987] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.165012] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.165016] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.165024] ACPI: SPCR: SPCR table version 1 [ 0.165027] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.165079] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.165097] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.165099] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.165101] [mem 0x20061000-0x9573efff] available for PCI devices [ 0.165106] Booting kernel on Xen [ 0.165107] Xen version: 4.20-unstable (preserve-AD) [ 0.165111] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.170425] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.170797] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u524288 [ 0.170803] pcpu-alloc: s180520 r8192 d32472 u524288 alloc=1*2097152 [ 0.170806] pcpu-alloc: [0] 0 1 2 3 [ 0.170881] xen: PV spinlocks enabled [ 0.170885] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.170891] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.170893] Kernel command line: placeholder root=/dev/mapper/godello1--vg-root ro console=hvc0 [ 0.170942] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.170962] random: crng init done [ 0.171035] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.171070] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.171613] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.171617] software IO TLB: area num 4. [ 0.246323] Memory: 390152K/524284K available (14349K kernel code, 2686K rwdata, 4584K rodata, 1580K init, 1288K bss, 133880K reserved, 0K cma-reserved) [ 0.246456] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.248771] Dynamic Preempt: voluntary [ 0.248842] rcu: Preemptible hierarchical RCU implementation. [ 0.248843] rcu: RCU event tracing is enabled. [ 0.248843] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.248845] Trampoline variant of Tasks RCU enabled. [ 0.248846] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.248847] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.256523] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.256637] xen:events: Using FIFO-based ABI [ 0.256664] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.256671] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.256676] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.256682] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.256687] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.256697] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.256702] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.256708] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.256713] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.256718] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.256724] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.256730] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.256735] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.256741] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.256746] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.256758] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.265942] Console: colour VGA+ 80x25 [ 0.285088] printk: console [tty0] enabled [ 0.286140] printk: console [hvc0] enabled [ 0.286295] ACPI: Core revision 20220331 [ 0.306657] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.306866] Xen: using vcpuop timer interface [ 0.306878] installing Xen timer for CPU 0 [ 0.307099] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c94d9afcf4, max_idle_ns: 440795231738 ns [ 0.307307] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.67 BogoMIPS (lpj=3092838) [ 0.307639] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.307784] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.307938] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.308317] Spectre V2 : Mitigation: Retpolines [ 0.308454] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.308624] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.308769] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.308919] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.309096] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.309241] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.309312] MDS: Mitigation: Clear CPU buffers [ 0.309453] MMIO Stale Data: Unknown: No mitigations [ 0.309593] SRBDS: Unknown: Dependent on hypervisor status [ 0.309756] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.309938] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.310080] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.310223] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.310308] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.327987] Freeing SMP alternatives memory: 40K [ 0.328155] pid_max: default: 32768 minimum: 301 [ 0.328322] LSM: Security Framework initializing [ 0.328467] SELinux: Initializing. [ 0.328646] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.328822] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.329421] cpu 0 spinlock event irq 25 [ 0.329567] VPMU disabled by hypervisor. [ 0.329966] cblist_init_generic: Setting adjustable number of callback queues. [ 0.330141] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.330319] Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only. [ 0.330503] signal: max sigframe size: 1776 [ 0.330682] rcu: Hierarchical SRCU implementation. [ 0.330820] rcu: Max phase no-delay instances is 400. [ 0.331279] smp: Bringing up secondary CPUs ... [ 0.331480] installing Xen timer for CPU 1 [ 0.331906] cpu 1 spinlock event irq 35 [ 0.332423] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.332788] installing Xen timer for CPU 2 [ 0.333438] cpu 2 spinlock event irq 41 [ 0.333485] installing Xen timer for CPU 3 [ 0.333886] cpu 3 spinlock event irq 47 [ 0.334417] smp: Brought up 1 node, 4 CPUs [ 0.334558] smpboot: Max logical packages: 1 [ 0.334810] devtmpfs: initialized [ 0.334810] x86/mm: Memory block size: 128MB [ 0.335477] ACPI: PM: Registering ACPI NVS region [mem 0x95bbf000-0x95fbefff] (4194304 bytes) [ 0.335605] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.335790] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.336313] PM: RTC time: 19:56:49, date: 2024-09-24 [ 0.336585] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.336766] xen:grant_table: Grant tables using version 1 layout [ 0.336928] Grant table initialized [ 0.337195] audit: initializing netlink subsys (disabled) [ 0.337355] audit: type=2000 audit(1727207810.152:1): state=initialized audit_enabled=0 res=1 [ 0.337370] thermal_sys: Registered thermal governor 'step_wise' [ 0.337370] thermal_sys: Registered thermal governor 'user_space' [ 0.337541] Simple Boot Flag at 0x44 set to 0x1 [ 0.337839] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.338467] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.338654] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 0.384532] PCI: Using configuration type 1 for base access [ 0.384867] PCI: Dell System detected, enabling pci=bfsort. [ 0.387118] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.387396] ACPI: Added _OSI(Module Device) [ 0.387499] ACPI: Added _OSI(Processor Device) [ 0.388311] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.388450] ACPI: Added _OSI(Processor Aggregator Device) [ 0.402285] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.402935] xen: registering gsi 9 triggering 0 polarity 0 [ 0.403418] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.407753] ACPI: Dynamic OEM Table Load: [ 0.407901] ACPI: SSDT 0xFFFF88800358A800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120816) [ 0.408801] ACPI: Dynamic OEM Table Load: [ 0.408940] ACPI: SSDT 0xFFFF8880036F6000 0005AA (v01 PmRef ApIst 00003000 INTL 20120816) [ 0.409747] ACPI: Dynamic OEM Table Load: [ 0.409890] ACPI: SSDT 0xFFFF888003552C00 000119 (v01 PmRef ApCst 00003000 INTL 20120816) [ 0.411176] ACPI: Interpreter enabled [ 0.411328] ACPI: PM: (supports S0 S4 S5) [ 0.411465] ACPI: Using IOAPIC for interrupt routing [ 0.411629] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.411809] PCI: Using E820 reservations for host bridge windows [ 0.412209] ACPI: Enabled 11 GPEs in block 00 to 3F [ 0.418093] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1) [ 0.425928] ACPI: PM: Power Resource [FN00] [ 0.426103] ACPI: PM: Power Resource [FN01] [ 0.426274] ACPI: PM: Power Resource [FN02] [ 0.426345] ACPI: PM: Power Resource [FN03] [ 0.426516] ACPI: PM: Power Resource [FN04] [ 0.427352] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) [ 0.427502] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.428526] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability LTR] [ 0.428677] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.429351] PCI host bridge to bus 0000:00 [ 0.429491] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.429636] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.429781] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.429949] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff window] [ 0.430219] pci_bus 0000:00: root bus resource [bus 00-7e] [ 0.430343] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000 [ 0.430888] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.431104] pci 0000:00:14.0: reg 0x10: [mem 0xa2b00000-0xa2b0ffff 64bit] [ 0.431525] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.431898] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.432097] pci 0000:00:1a.0: reg 0x10: [mem 0xa2b12000-0xa2b123ff] [ 0.432566] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.432883] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.433382] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.433603] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.433747] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.434231] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 [ 0.434669] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.434887] pci 0000:00:1c.2: Enabling MPC IRBNCE [ 0.435029] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled [ 0.435538] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.435738] pci 0000:00:1d.0: reg 0x10: [mem 0xa2b11000-0xa2b113ff] [ 0.436199] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.436500] pci 0000:00:1f.0: [8086:8c52] type 00 class 0x060100 [ 0.437158] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.437356] pci 0000:00:1f.2: reg 0x10: [io 0x3048-0x304f] [ 0.437526] pci 0000:00:1f.2: reg 0x14: [io 0x3054-0x3057] [ 0.437698] pci 0000:00:1f.2: reg 0x18: [io 0x3040-0x3047] [ 0.437872] pci 0000:00:1f.2: reg 0x1c: [io 0x3050-0x3053] [ 0.438043] pci 0000:00:1f.2: reg 0x20: [io 0x3020-0x303f] [ 0.438214] pci 0000:00:1f.2: reg 0x24: [mem 0xa2b10000-0xa2b107ff] [ 0.438484] pci 0000:00:1f.2: PME# supported from D3hot [ 0.438762] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.438977] pci 0000:00:1f.3: reg 0x10: [mem 0xa2b13000-0xa2b130ff 64bit] [ 0.439205] pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f] [ 0.439748] pci 0000:01:00.0: [14e4:165f] type 00 class 0x020000 [ 0.440049] pci 0000:01:00.0: reg 0x10: [mem 0xa2a30000-0xa2a3ffff 64bit pref] [ 0.440347] pci 0000:01:00.0: reg 0x18: [mem 0xa2a40000-0xa2a4ffff 64bit pref] [ 0.440637] pci 0000:01:00.0: reg 0x20: [mem 0xa2a50000-0xa2a5ffff 64bit pref] [ 0.440902] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 0.441566] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.442291] pci 0000:01:00.1: [14e4:165f] type 00 class 0x020000 [ 0.442599] pci 0000:01:00.1: reg 0x10: [mem 0xa2a00000-0xa2a0ffff 64bit pref] [ 0.442889] pci 0000:01:00.1: reg 0x18: [mem 0xa2a10000-0xa2a1ffff 64bit pref] [ 0.443179] pci 0000:01:00.1: reg 0x20: [mem 0xa2a20000-0xa2a2ffff 64bit pref] [ 0.443407] pci 0000:01:00.1: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 0.444018] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold [ 0.444860] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.445034] pci 0000:00:1c.0: bridge window [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.445737] pci 0000:02:00.0: [1912:0013] type 01 class 0x060400 [ 0.448838] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.450420] pci 0000:00:1c.2: PCI bridge to [bus 02-06] [ 0.450579] pci 0000:00:1c.2: bridge window [mem 0xa2000000-0xa29fffff] [ 0.450741] pci 0000:00:1c.2: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.452229] pci 0000:03:00.0: [1912:0013] type 01 class 0x060400 [ 0.455678] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.457496] pci 0000:03:01.0: [1912:0013] type 01 class 0x060400 [ 0.461193] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold [ 0.464801] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 0.465133] pci 0000:02:00.0: bridge window [mem 0xa2000000-0xa29fffff] [ 0.465410] pci 0000:02:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.466908] pci 0000:04:00.0: [1912:0012] type 01 class 0x060400 [ 0.471666] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 0.472116] pci 0000:03:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.472387] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.473604] pci_bus 0000:05: extended config space not accessible [ 0.473982] pci 0000:05:00.0: [102b:0534] type 00 class 0x030000 [ 0.474616] pci 0000:05:00.0: reg 0x10: [mem 0xa1000000-0xa1ffffff pref] [ 0.475575] pci 0000:05:00.0: reg 0x14: [mem 0xa2800000-0xa2803fff] [ 0.475981] pci 0000:05:00.0: reg 0x18: [mem 0xa2000000-0xa27fffff] [ 0.477458] pci 0000:05:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.480904] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.481260] pci 0000:04:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.481460] pci 0000:04:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.483249] pci 0000:06:00.0: [1912:0011] type 00 class 0x050000 [ 0.483804] pci 0000:06:00.0: reg 0x10: [mem 0xa2901000-0xa2901fff] [ 0.484210] pci 0000:06:00.0: reg 0x14: [mem 0xa2900000-0xa290007f] [ 0.486570] pci 0000:06:00.0: PME# supported from D3hot [ 0.487466] pci 0000:03:01.0: PCI bridge to [bus 06] [ 0.487828] pci 0000:03:01.0: bridge window [mem 0xa2900000-0xa29fffff] [ 0.489147] pci_bus 0000:00: on NUMA node 0 [ 0.489347] xen: registering gsi 13 triggering 1 polarity 0 [ 0.490361] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.490576] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.490793] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.491012] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.491225] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.491308] ACPI: PCI: Interrupt link LNKE disabled [ 0.491515] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.491659] ACPI: PCI: Interrupt link LNKF disabled [ 0.491867] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.492010] ACPI: PCI: Interrupt link LNKG disabled [ 0.492225] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.493915] xen:balloon: Initialising balloon driver [ 0.494071] iommu: Default domain type: Translated [ 0.494313] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.494503] SCSI subsystem initialized [ 0.494649] libata version 3.00 loaded. [ 0.494649] ACPI: bus type USB registered [ 0.494649] usbcore: registered new interface driver usbfs [ 0.494649] usbcore: registered new interface driver hub [ 0.494780] usbcore: registered new device driver usb [ 0.495337] pps_core: LinuxPPS API ver. 1 registered [ 0.495479] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.495658] PTP clock support registered [ 0.495809] Advanced Linux Sound Architecture Driver Initialized. [ 0.495809] NetLabel: Initializing [ 0.495809] NetLabel: domain hash size = 128 [ 0.496310] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.496466] NetLabel: unlabeled traffic allowed by default [ 0.496624] PCI: Using ACPI for IRQ routing [ 0.513016] PCI: pci_cache_line_size set to 64 bytes [ 0.513648] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.513650] e820: reserve RAM buffer [mem 0x20061000-0x23ffffff] [ 0.513669] pci 0000:05:00.0: vgaarb: setting as boot VGA device [ 0.513669] pci 0000:05:00.0: vgaarb: bridge control possible [ 0.513778] pci 0000:05:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.514309] vgaarb: loaded [ 0.515780] clocksource: Switched to clocksource tsc-early [ 0.515989] VFS: Disk quotas dquot_6.6.0 [ 0.516134] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.516293] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.516293] pnp: PnP ACPI init [ 0.516367] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.516514] system 00:00: [io 0xffff] has been reserved [ 0.516654] system 00:00: [io 0xffff] has been reserved [ 0.516796] system 00:00: [io 0xffff] has been reserved [ 0.516936] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.517002] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.517002] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.517435] xen: registering gsi 8 triggering 1 polarity 0 [ 0.517488] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.517915] xen: registering gsi 3 triggering 1 polarity 0 [ 0.518177] xen: registering gsi 4 triggering 1 polarity 0 [ 0.518179] Already setup the GSI :4 [ 0.518498] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.518646] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.518789] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.518933] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.519077] system 00:06: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.519222] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.519375] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.519521] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved [ 0.519666] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.519811] system 00:06: [mem 0xa0000000-0xa0000fff] has been reserved [ 0.519956] system 00:06: [mem 0xa0020000-0xa002ffff] has been reserved [ 0.520992] pnp: PnP ACPI: found 7 devices [ 0.542670] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.542836] NET: Registered PF_INET protocol family [ 0.543006] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.543342] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.543520] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.543693] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.543872] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.544065] TCP: Hash tables configured (established 4096 bind 4096) [ 0.544222] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.544390] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.544572] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.544888] RPC: Registered named UNIX socket transport module. [ 0.545033] RPC: Registered udp transport module. [ 0.545171] RPC: Registered tcp transport module. [ 0.545317] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.545737] clipped [mem size 0x00020000] to [mem size 0xfffffffffffc0000] for e820 entry [mem 0x0009f000-0x000fffff] [ 0.545925] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0100000-0xa01fffff] [ 0.546068] pci 0000:01:00.0: BAR 6: assigned [mem 0xa0100000-0xa013ffff pref] [ 0.546236] pci 0000:01:00.1: BAR 6: assigned [mem 0xa0140000-0xa017ffff pref] [ 0.546416] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.546570] pci 0000:00:1c.0: bridge window [mem 0xa0100000-0xa01fffff] [ 0.546724] pci 0000:00:1c.0: bridge window [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.546915] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.547204] pci 0000:04:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.547463] pci 0000:04:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.547838] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 0.548124] pci 0000:03:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.548375] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.548746] pci 0000:03:01.0: PCI bridge to [bus 06] [ 0.549028] pci 0000:03:01.0: bridge window [mem 0xa2900000-0xa29fffff] [ 0.549540] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 0.549811] pci 0000:02:00.0: bridge window [mem 0xa2000000-0xa29fffff] [ 0.550042] pci 0000:02:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.550466] pci 0000:00:1c.2: PCI bridge to [bus 02-06] [ 0.550634] pci 0000:00:1c.2: bridge window [mem 0xa2000000-0xa29fffff] [ 0.550787] pci 0000:00:1c.2: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.550972] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.551118] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.551261] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.551412] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff window] [ 0.551556] pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa01fffff] [ 0.551693] pci_bus 0000:01: resource 2 [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.551865] pci_bus 0000:02: resource 1 [mem 0xa2000000-0xa29fffff] [ 0.552037] pci_bus 0000:02: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.552211] pci_bus 0000:03: resource 1 [mem 0xa2000000-0xa29fffff] [ 0.552362] pci_bus 0000:03: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.552534] pci_bus 0000:04: resource 1 [mem 0xa2000000-0xa28fffff] [ 0.552678] pci_bus 0000:04: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.552844] pci_bus 0000:05: resource 1 [mem 0xa2000000-0xa28fffff] [ 0.552988] pci_bus 0000:05: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.553161] pci_bus 0000:06: resource 1 [mem 0xa2900000-0xa29fffff] [ 0.553445] xen: registering gsi 16 triggering 0 polarity 1 [ 0.553465] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.554912] xen: registering gsi 16 triggering 0 polarity 1 [ 0.554916] Already setup the GSI :16 [ 0.566433] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 11299 usecs [ 0.566684] xen: registering gsi 23 triggering 0 polarity 1 [ 0.566697] xen: --> pirq=23 -> irq=23 (gsi=23) [ 0.578413] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 11503 usecs [ 0.578892] PCI: CLS 64 bytes, default 64 [ 0.579055] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.579097] Unpacking initramfs... [ 0.579201] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.579593] kvm: no hardware support for 'kvm_intel' [ 0.579734] has_svm: not amd or hygon [ 0.579873] kvm: no hardware support for 'kvm_amd' [ 0.580009] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c94d9afcf4, max_idle_ns: 440795231738 ns [ 0.580231] clocksource: Switched to clocksource tsc [ 0.586393] Initialise system trusted keyrings [ 0.586632] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.587779] NFS: Registering the id_resolver key type [ 0.587925] Key type id_resolver registered [ 0.588061] Key type id_legacy registered [ 0.588242] 9p: Installing v9fs 9p2000 file system support [ 0.598095] Key type asymmetric registered [ 0.598242] Asymmetric key parser 'x509' registered [ 0.598396] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.598607] io scheduler mq-deadline registered [ 0.598747] io scheduler kyber registered [ 0.599352] xen: registering gsi 16 triggering 0 polarity 1 [ 0.599359] Already setup the GSI :16 [ 0.599734] pcieport 0000:00:1c.0: PME: Signaling with IRQ 50 [ 0.600099] xen: registering gsi 18 triggering 0 polarity 1 [ 0.600112] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.600281] pcieport 0000:00:1c.2: PME: Signaling with IRQ 51 [ 0.604671] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.605020] ACPI: button: Power Button [PWRF] [ 0.605542] Monitor-Mwait will be used to enter C-1 state [ 0.605578] Monitor-Mwait will be used to enter C-2 state [ 0.605590] ACPI: \_PR_.CPU0: Found 2 idle states [ 0.605984] ACPI: \_PR_.CPU1: Found 2 idle states [ 0.618021] ACPI: \_PR_.CPU2: Found 2 idle states [ 0.618314] ACPI: \_PR_.CPU3: Found 2 idle states [ 0.618839] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.618985] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.619338] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.619483] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.619890] xen:xen_evtchn: Event-channel device installed [ 0.620098] xen_pciback: backend is vpci [ 0.620680] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.620921] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.621563] hpet_acpi_add: no address or irqs in _CRS [ 0.621793] Non-volatile memory driver v1.3 [ 0.621931] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.623573] loop: module loaded [ 0.627157] ahci 0000:00:1f.2: version 3.0 [ 0.627261] xen: registering gsi 19 triggering 0 polarity 1 [ 0.627282] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.627431] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.627646] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode [ 0.627816] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 0.635057] scsi host0: ahci [ 0.635422] scsi host1: ahci [ 0.635747] scsi host2: ahci [ 0.636012] scsi host3: ahci [ 0.636271] scsi host4: ahci [ 0.636531] scsi host5: ahci [ 0.636707] ata1: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10100 irq 53 [ 0.636882] ata2: DUMMY [ 0.637012] ata3: DUMMY [ 0.637141] ata4: DUMMY [ 0.637306] ata5: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10300 irq 53 [ 0.637481] ata6: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10380 irq 53 [ 0.637835] tun: Universal TUN/TAP device driver, 1.6 [ 0.638160] xen: registering gsi 16 triggering 0 polarity 1 [ 0.638166] Already setup the GSI :16 [ 0.652896] Freeing initrd memory: 20628K [ 0.673185] tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 54:9f:35:05:fd:88 [ 0.673373] tg3 0000:01:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 0.673560] tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 0.673735] tg3 0000:01:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 0.674278] xen: registering gsi 17 triggering 0 polarity 1 [ 0.674300] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.724629] tg3 0000:01:00.1 eth1: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 54:9f:35:05:fd:8a [ 0.724816] tg3 0000:01:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 0.724998] tg3 0000:01:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 0.725171] tg3 0000:01:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit] [ 0.725733] e100: Intel(R) PRO/100 Network Driver [ 0.725873] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.726018] sky2: driver version 1.30 [ 0.726180] xen_netfront: Initialising Xen virtual ethernet driver [ 0.726497] xen: registering gsi 16 triggering 0 polarity 1 [ 0.726502] Already setup the GSI :16 [ 0.726711] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.726924] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.727129] ehci-pci 0000:00:1a.0: debug port 2 [ 0.731308] ehci-pci 0000:00:1a.0: irq 16, io mem 0xa2b12000 [ 0.737586] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.737793] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.737963] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.738171] usb usb1: Product: EHCI Host Controller [ 0.738311] usb usb1: Manufacturer: Linux 6.1.111+ ehci_hcd [ 0.738452] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.738737] hub 1-0:1.0: USB hub found [ 0.738884] hub 1-0:1.0: 2 ports detected [ 0.739240] xen: registering gsi 23 triggering 0 polarity 1 [ 0.739245] Already setup the GSI :23 [ 0.739429] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.739721] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.739928] ehci-pci 0000:00:1d.0: debug port 2 [ 0.744055] ehci-pci 0000:00:1d.0: irq 23, io mem 0xa2b11000 [ 0.750573] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.750777] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.750950] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.751117] usb usb2: Product: EHCI Host Controller [ 0.751258] usb usb2: Manufacturer: Linux 6.1.111+ ehci_hcd [ 0.751399] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.751676] hub 2-0:1.0: USB hub found [ 0.751823] hub 2-0:1.0: 2 ports detected [ 0.752236] xen: registering gsi 16 triggering 0 polarity 1 [ 0.752240] Already setup the GSI :16 [ 0.752437] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.752679] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.753932] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.754375] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.754588] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.754765] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.754971] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.755181] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.755354] usb usb3: Product: xHCI Host Controller [ 0.755494] usb usb3: Manufacturer: Linux 6.1.111+ xhci-hcd [ 0.755645] usb usb3: SerialNumber: 0000:00:14.0 [ 0.755925] hub 3-0:1.0: USB hub found [ 0.756082] hub 3-0:1.0: 10 ports detected [ 0.759469] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.759656] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.759861] usb usb4: Product: xHCI Host Controller [ 0.760000] usb usb4: Manufacturer: Linux 6.1.111+ xhci-hcd [ 0.760140] usb usb4: SerialNumber: 0000:00:14.0 [ 0.760435] hub 4-0:1.0: USB hub found [ 0.760604] hub 4-0:1.0: 2 ports detected [ 0.761139] usbcore: registered new interface driver usblp [ 0.761328] usbcore: registered new interface driver usb-storage [ 0.761509] i8042: PNP: No PS/2 controller found. [ 0.761754] rtc_cmos 00:02: RTC can wake from S4 [ 0.762318] rtc_cmos 00:02: registered as rtc0 [ 0.762500] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram [ 0.762695] device-mapper: uevent: version 1.0.3 [ 0.762755] xen: registering gsi 18 triggering 0 polarity 1 [ 0.762834] Already setup the GSI :18 [ 0.762959] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.763086] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.763147] intel_pstate: CPU model not supported [ 0.763430] hid: raw HID events driver (C) Jiri Kosina [ 0.763675] usbcore: registered new interface driver usbhid [ 0.763816] usbhid: USB HID core driver [ 0.764281] Initializing XFRM netlink socket [ 0.764551] NET: Registered PF_INET6 protocol family [ 0.765016] Segment Routing with IPv6 [ 0.765159] In-situ OAM (IOAM) with IPv6 [ 0.765321] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.765541] NET: Registered PF_PACKET protocol family [ 0.765724] 9pnet: Installing 9P2000 support [ 0.765869] Key type dns_resolver registered [ 0.766250] IPI shorthand broadcast: enabled [ 0.766408] sched_clock: Marking stable (715674216, 50543495)->(784816202, -18598491) [ 0.766823] registered taskstats version 1 [ 0.766962] Loading compiled-in X.509 certificates [ 0.767860] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.768526] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.768658] PM: Magic number: 8:729:951 [ 0.768847] tty tty8: hash matches [ 0.769016] memory memory4: hash matches [ 0.769162] printk: console [netcon0] enabled [ 0.769303] netconsole: network logging started [ 0.769644] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.777559] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.777867] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.778423] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.778635] ALSA device list: [ 0.778793] No soundcards found. [ 0.944940] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.980593] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.988592] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.992887] ata1.00: ATA-8: TOSHIBA MG03ACA100, FL1D, max UDMA/100 [ 0.993762] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.995299] ata1.00: configured for UDMA/100 [ 0.995593] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MG03ACA1 FL1D PQ: 0 ANSI: 5 [ 0.996301] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.996334] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.996561] usb 3-9: new high-speed USB device number 2 using xhci_hcd [ 0.996643] sd 0:0:0:0: [sda] Write Protect is off [ 0.996892] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.996938] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.997157] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.109332] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.109504] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.121126] hub 1-1:1.0: USB hub found [ 1.121267] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.121464] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.121654] hub 1-1:1.0: 4 ports detected [ 1.121990] hub 2-1:1.0: USB hub found [ 1.122285] hub 2-1:1.0: 6 ports detected [ 1.133326] usb 3-9: New USB device found, idVendor=0624, idProduct=0248, bcdDevice= 0.00 [ 1.133496] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.133649] usb 3-9: Product: Gadget USB HUB [ 1.133812] usb 3-9: Manufacturer: no manufacturer [ 1.133947] usb 3-9: SerialNumber: 0123456789 [ 1.134894] hub 3-9:1.0: USB hub found [ 1.135136] hub 3-9:1.0: 6 ports detected [ 1.184795] sda: sda1 sda2 < sda5 > [ 1.185283] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.312528] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.315367] ata5.00: ATAPI: HL-DT-ST DVD+/-RW GTA0N, A3B0, max UDMA/100 [ 1.320175] ata5.00: configured for UDMA/100 [ 1.325374] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD+-RW GTA0N A3B0 PQ: 0 ANSI: 5 [ 1.366141] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.366325] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.386025] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.386093] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 1.428611] usb 3-9.1: new high-speed USB device number 3 using xhci_hcd [ 1.515608] usb 3-9.1: New USB device found, idVendor=0624, idProduct=0249, bcdDevice= 0.00 [ 1.515790] usb 3-9.1: New USB device strings: Mfr=4, Product=5, SerialNumber=6 [ 1.515966] usb 3-9.1: Product: Keyboard/Mouse Function [ 1.516100] usb 3-9.1: Manufacturer: Avocent [ 1.516238] usb 3-9.1: SerialNumber: 20120917 [ 1.522824] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/0003:0624:0249.0001/input/input1 [ 1.574726] hid-generic 0003:0624:0249.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input0 [ 1.575737] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/0003:0624:0249.0002/input/input2 [ 1.576011] hid-generic 0003:0624:0249.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input1 [ 1.576864] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.2/0003:0624:0249.0003/input/input3 [ 1.577101] hid-generic 0003:0624:0249.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input2 [ 1.696910] ata6: SATA link down (SStatus 0 SControl 300) [ 1.697839] Freeing unused kernel image (initmem) memory: 1580K [ 1.697988] Write protecting the kernel read-only data: 22528k [ 1.710664] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.711579] Freeing unused kernel image (rodata/data gap) memory: 1560K [ 1.908773] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.908922] Run /init as init process [ 1.909058] with arguments: [ 1.909058] /init [ 1.909059] placeholder [ 1.909060] with environment: [ 1.909060] HOME=/ [ 1.909061] TERM=linux [ 2.136977] tg3 0000:01:00.1 enx549f3505fd8a: renamed from eth1 [ 2.142765] tg3 0000:01:00.0 enx549f3505fd88: renamed from eth0 [ 2.859173] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.093191] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 6.490596] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 7.578871] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 7.601354] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 7.660501] Adding 1949692k swap on /dev/mapper/godello1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 9.146734] xenbr0: port 1(enx549f3505fd88) entered blocking state [ 9.146950] xenbr0: port 1(enx549f3505fd88) entered disabled state [ 9.147128] device enx549f3505fd88 entered promiscuous mode [ 12.725549] tg3 0000:01:00.0 enx549f3505fd88: Link is up at 1000 Mbps, full duplex [ 12.725603] IPv6: ADDRCONF(NETDEV_CHANGE): enx549f3505fd88: link becomes ready [ 12.725761] tg3 0000:01:00.0 enx549f3505fd88: Flow control is off for TX and off for RX [ 12.725794] xenbr0: port 1(enx549f3505fd88) entered blocking state [ 12.725942] tg3 0000:01:00.0 enx549f3505fd88: EEE is disabled [ 12.725953] xenbr0: port 1(enx549f3505fd88) entered forwarding state [ 12.726612] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready