[ 0.000000] Linux version 6.11.0+ (osstest@himrod0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Fri Sep 27 17:47:16 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/godello0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] Xen: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020060fff] usable [ 0.000000] Xen: [mem 0x000000009573f000-0x0000000095bbefff] reserved [ 0.000000] Xen: [mem 0x0000000095bbf000-0x0000000095fbefff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000095fbf000-0x0000000095ffefff] ACPI data [ 0.000000] Xen: [mem 0x0000000096000000-0x000000009fffffff] reserved [ 0.000000] Xen: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] Xen: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed90fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. PowerEdge R220/081N4V, BIOS 1.1.4 05/06/2014 [ 0.000000] DMI: Memory slots populated: 1/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000022] Xen PV: Detected 4 vCPUS [ 0.000482] tsc: Detected 3092.838 MHz processor [ 0.000799] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000801] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000806] last_pfn = 0x95fff max_arch_pfn = 0x400000000 [ 0.000809] MTRR map: 4 entries (0 fixed + 4 variable; max 20), built from 10 variable MTRRs [ 0.000811] MTRRs set to read-only [ 0.000815] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000867] Kernel/User page tables isolation: disabled on XEN PV. [ 0.019785] RAMDISK: [mem 0x04000000-0x0545ffff] [ 0.019797] ACPI: Early table checksum verification disabled [ 0.021421] ACPI: RSDP 0x00000000000FE020 000024 (v02 DELL ) [ 0.021432] ACPI: XSDT 0x0000000095FCF188 0000E4 (v01 DELL PE_SC3 00000001 01000013) [ 0.021490] ACPI: FACP 0x0000000095FF7000 00010C (v05 DELL PE_SC3 00000001 DELL 00040000) [ 0.021565] ACPI: DSDT 0x0000000095FDF000 012335 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.021578] ACPI: FACS 0x0000000095FBD000 000040 [ 0.021591] ACPI: UEFI 0x0000000095FFD000 000236 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.021603] ACPI: UEFI 0x0000000095FFC000 000042 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.021616] ACPI: ASF! 0x0000000095FFB000 0000A5 (v32 DELL PE_SC3 00000001 DELL 00040000) [ 0.021629] ACPI: ASPT 0x0000000095FFA000 000034 (v07 DELL PE_SC3 00000001 DELL 00040000) [ 0.021642] ACPI: BOOT 0x0000000095FF9000 000028 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.021655] ACPI: DBGP 0x0000000095FF8000 000034 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.021668] ACPI: HPET 0x0000000095FF6000 000038 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.021680] ACPI: APIC 0x0000000095FF5000 000092 (v03 DELL PE_SC3 00000001 DELL 00040000) [ 0.021692] ACPI: MCFG 0x0000000095FF4000 00003C (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.021705] ACPI: SLIC 0x0000000095FF3000 000176 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.021718] ACPI: SSDT 0x0000000095FDC000 002028 (v01 DELL PE_SC3 00001000 DELL 00040000) [ 0.021730] ACPI: SPMI 0x0000000095FDA000 000040 (v05 DELL PE_SC3 00000001 DELL 00040000) [ 0.021743] ACPI: SSDT 0x0000000095FD9000 000533 (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.021755] ACPI: SSDT 0x0000000095FD8000 000ACE (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.021768] ACPI: SSDT 0x0000000095FD4000 003492 (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.021781] ACPI: SPCR 0x0000000095FF2000 000050 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.021794] ACPI: RMAD 0x0000000095FD3000 000080 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.021807] ACPI: SSDT 0x0000000095FD2000 000514 (v01 DELL PE_SC3 00001000 DELL 00040000) [ 0.021819] ACPI: FPDT 0x0000000095FD1000 000044 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.021832] ACPI: HEST 0x0000000095FD0000 0000A8 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.021844] ACPI: ERST 0x0000000095FCE000 000230 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.021857] ACPI: BERT 0x0000000095FCD000 000030 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.021870] ACPI: EINJ 0x0000000095FCC000 000150 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.021876] ACPI: Reserving FACP table memory at [mem 0x95ff7000-0x95ff710b] [ 0.021877] ACPI: Reserving DSDT table memory at [mem 0x95fdf000-0x95ff1334] [ 0.021878] ACPI: Reserving FACS table memory at [mem 0x95fbd000-0x95fbd03f] [ 0.021878] ACPI: Reserving UEFI table memory at [mem 0x95ffd000-0x95ffd235] [ 0.021879] ACPI: Reserving UEFI table memory at [mem 0x95ffc000-0x95ffc041] [ 0.021880] ACPI: Reserving ASF! table memory at [mem 0x95ffb000-0x95ffb0a4] [ 0.021880] ACPI: Reserving ASPT table memory at [mem 0x95ffa000-0x95ffa033] [ 0.021881] ACPI: Reserving BOOT table memory at [mem 0x95ff9000-0x95ff9027] [ 0.021881] ACPI: Reserving DBGP table memory at [mem 0x95ff8000-0x95ff8033] [ 0.021882] ACPI: Reserving HPET table memory at [mem 0x95ff6000-0x95ff6037] [ 0.021883] ACPI: Reserving APIC table memory at [mem 0x95ff5000-0x95ff5091] [ 0.021883] ACPI: Reserving MCFG table memory at [mem 0x95ff4000-0x95ff403b] [ 0.021884] ACPI: Reserving SLIC table memory at [mem 0x95ff3000-0x95ff3175] [ 0.021884] ACPI: Reserving SSDT table memory at [mem 0x95fdc000-0x95fde027] [ 0.021885] ACPI: Reserving SPMI table memory at [mem 0x95fda000-0x95fda03f] [ 0.021886] ACPI: Reserving SSDT table memory at [mem 0x95fd9000-0x95fd9532] [ 0.021886] ACPI: Reserving SSDT table memory at [mem 0x95fd8000-0x95fd8acd] [ 0.021887] ACPI: Reserving SSDT table memory at [mem 0x95fd4000-0x95fd7491] [ 0.021888] ACPI: Reserving SPCR table memory at [mem 0x95ff2000-0x95ff204f] [ 0.021888] ACPI: Reserving RMAD table memory at [mem 0x95fd3000-0x95fd307f] [ 0.021889] ACPI: Reserving SSDT table memory at [mem 0x95fd2000-0x95fd2513] [ 0.021889] ACPI: Reserving FPDT table memory at [mem 0x95fd1000-0x95fd1043] [ 0.021890] ACPI: Reserving HEST table memory at [mem 0x95fd0000-0x95fd00a7] [ 0.021891] ACPI: Reserving ERST table memory at [mem 0x95fce000-0x95fce22f] [ 0.021891] ACPI: Reserving BERT table memory at [mem 0x95fcd000-0x95fcd02f] [ 0.021892] ACPI: Reserving EINJ table memory at [mem 0x95fcc000-0x95fcc14f] [ 0.022013] APIC: Switched APIC routing to: Xen PV [ 0.025016] Zone ranges: [ 0.025017] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.025019] DMA32 [mem 0x0000000001000000-0x0000000095ffefff] [ 0.025021] Normal empty [ 0.025022] Movable zone start for each node [ 0.025023] Early memory node ranges [ 0.025024] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.025025] node 0: [mem 0x0000000000100000-0x0000000020060fff] [ 0.025027] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020060fff] [ 0.025036] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.025116] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.028527] On node 0, zone DMA32: 32671 pages in unavailable ranges [ 0.028534] p2m virtual area at (____ptrval____), size is 40000000 [ 0.119783] Remapped 97 page(s) [ 0.119789] Remapped 0 non-RAM page(s) [ 0.120338] ACPI: PM-Timer IO Port: 0x1808 [ 0.120406] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.120442] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.120454] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.120457] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.120481] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.120489] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.120498] ACPI: SPCR: SPCR table version 1 [ 0.120500] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.120504] CPU topo: 8 possible CPUs exceed the limit of 4 [ 0.120512] CPU topo: Max. logical packages: 1 [ 0.120512] CPU topo: Max. logical dies: 1 [ 0.120513] CPU topo: Max. dies per package: 1 [ 0.120519] CPU topo: Max. threads per core: 1 [ 0.120520] CPU topo: Num. cores per package: 4 [ 0.120520] CPU topo: Num. threads per package: 4 [ 0.120521] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.120535] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.120537] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.120539] PM: hibernation: Registered nosave memory: [mem 0x20061000-0x9573efff] [ 0.120539] PM: hibernation: Registered nosave memory: [mem 0x9573f000-0x95bbefff] [ 0.120540] PM: hibernation: Registered nosave memory: [mem 0x95bbf000-0x95fbefff] [ 0.120541] PM: hibernation: Registered nosave memory: [mem 0x95fbf000-0x95ffefff] [ 0.120543] [mem 0x20061000-0x9573efff] available for PCI devices [ 0.120547] Booting kernel on Xen [ 0.120548] Xen version: 4.20-unstable (preserve-AD) [ 0.120552] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.126614] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.127358] percpu: Embedded 57 pages/cpu s194520 r8192 d30760 u524288 [ 0.127364] pcpu-alloc: s194520 r8192 d30760 u524288 alloc=1*2097152 [ 0.127367] pcpu-alloc: [0] 0 1 2 3 [ 0.127439] xen: PV spinlocks enabled [ 0.127442] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.127445] Kernel command line: placeholder root=/dev/mapper/godello0--vg-root ro console=hvc0 [ 0.127495] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.127515] random: crng init done [ 0.127672] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.127752] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.128296] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.128298] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.128301] software IO TLB: area num 4. [ 0.213635] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.216111] Dynamic Preempt: voluntary [ 0.216241] rcu: Preemptible hierarchical RCU implementation. [ 0.216242] rcu: RCU event tracing is enabled. [ 0.216243] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.216245] Trampoline variant of Tasks RCU enabled. [ 0.216247] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.216248] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.216267] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.225122] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.225275] xen:events: Using FIFO-based ABI [ 0.225302] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.225308] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.225313] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.225319] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.225324] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.225329] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.225335] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.225340] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.225345] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.225350] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.225356] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.225362] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.225369] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.225374] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.225379] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.225390] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.234547] Console: colour VGA+ 80x25 [ 0.234553] printk: legacy console [tty0] enabled [ 0.256097] printk: legacy console [hvc0] enabled [ 0.257228] ACPI: Core revision 20240827 [ 0.277612] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.279858] Xen: using vcpuop timer interface [ 0.279870] installing Xen timer for CPU 0 [ 0.280073] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c94d9afcf4, max_idle_ns: 440795231738 ns [ 0.280262] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.67 BogoMIPS (lpj=3092838) [ 0.280608] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.280748] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.280900] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.281274] Spectre V2 : Mitigation: Retpolines [ 0.281413] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.281589] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.281732] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.281878] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.282054] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.282232] MDS: Mitigation: Clear CPU buffers [ 0.282264] MMIO Stale Data: Unknown: No mitigations [ 0.282402] SRBDS: Unknown: Dependent on hypervisor status [ 0.282562] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.282741] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.282884] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.283028] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.283173] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.306283] Freeing SMP alternatives memory: 40K [ 0.306450] pid_max: default: 32768 minimum: 301 [ 0.306621] LSM: initializing lsm=capability,selinux [ 0.306786] SELinux: Initializing. [ 0.307092] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.307265] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.308378] cpu 0 spinlock event irq 25 [ 0.308521] VPMU disabled by hypervisor. [ 0.309130] Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only. [ 0.309267] signal: max sigframe size: 1776 [ 0.309467] rcu: Hierarchical SRCU implementation. [ 0.309608] rcu: Max phase no-delay instances is 400. [ 0.309862] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.310398] smp: Bringing up secondary CPUs ... [ 0.312275] installing Xen timer for CPU 1 [ 0.312708] installing Xen timer for CPU 2 [ 0.313114] installing Xen timer for CPU 3 [ 0.055865] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0002 [ 0.313346] cpu 1 spinlock event irq 45 [ 0.055865] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0004 [ 0.313636] cpu 2 spinlock event irq 46 [ 0.055865] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0006 [ 0.314315] cpu 3 spinlock event irq 47 [ 0.314636] smp: Brought up 1 node, 4 CPUs [ 0.315311] Memory: 382012K/524284K available (16384K kernel code, 2785K rwdata, 6296K rodata, 2708K init, 1728K bss, 138220K reserved, 0K cma-reserved) [ 0.315663] devtmpfs: initialized [ 0.315663] x86/mm: Memory block size: 128MB [ 0.316371] ACPI: PM: Registering ACPI NVS region [mem 0x95bbf000-0x95fbefff] (4194304 bytes) [ 0.316547] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.316731] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.317000] PM: RTC time: 18:07:18, date: 2024-09-27 [ 0.317384] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.317556] xen:grant_table: Grant tables using version 1 layout [ 0.317714] Grant table initialized [ 0.317976] audit: initializing netlink subsys (disabled) [ 0.318159] audit: type=2000 audit(1727460439.234:1): state=initialized audit_enabled=0 res=1 [ 0.318369] thermal_sys: Registered thermal governor 'step_wise' [ 0.318369] thermal_sys: Registered thermal governor 'user_space' [ 0.318503] Simple Boot Flag at 0x44 set to 0x1 [ 0.318835] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.319332] PCI: ECAM [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) for domain 0000 [bus 00-7f] [ 0.319528] PCI: ECAM [mem 0xf0000000-0xf7ffffff] reserved as E820 entry [ 0.369769] PCI: Using configuration type 1 for base access [ 0.369984] PCI: Dell System detected, enabling pci=bfsort. [ 0.370310] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.370513] ACPI: Added _OSI(Module Device) [ 0.370513] ACPI: Added _OSI(Processor Device) [ 0.370513] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.370541] ACPI: Added _OSI(Processor Aggregator Device) [ 0.380904] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.381686] xen: registering gsi 9 triggering 0 polarity 0 [ 0.382307] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.386628] ACPI: Dynamic OEM Table Load: [ 0.386779] ACPI: SSDT 0xFFFF8880059EC000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120816) [ 0.387689] ACPI: Dynamic OEM Table Load: [ 0.387832] ACPI: SSDT 0xFFFF8880059F1800 0005AA (v01 PmRef ApIst 00003000 INTL 20120816) [ 0.388638] ACPI: Dynamic OEM Table Load: [ 0.388781] ACPI: SSDT 0xFFFF888003B76200 000119 (v01 PmRef ApCst 00003000 INTL 20120816) [ 0.390037] ACPI: Interpreter enabled [ 0.390194] ACPI: PM: (supports S0 S4 S5) [ 0.390263] ACPI: Using IOAPIC for interrupt routing [ 0.390427] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.390735] PCI: Using E820 reservations for host bridge windows [ 0.391122] ACPI: Enabled 11 GPEs in block 00 to 3F [ 0.399015] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1) [ 0.407188] ACPI: \_TZ_.FN00: New power resource [ 0.407302] ACPI: \_TZ_.FN01: New power resource [ 0.407478] ACPI: \_TZ_.FN02: New power resource [ 0.407686] ACPI: \_TZ_.FN03: New power resource [ 0.407858] ACPI: \_TZ_.FN04: New power resource [ 0.408705] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) [ 0.408855] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.409884] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability LTR] [ 0.410031] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.410713] PCI host bridge to bus 0000:00 [ 0.410853] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.410998] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.411144] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.411263] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff window] [ 0.411435] pci_bus 0000:00: root bus resource [bus 00-7e] [ 0.411609] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000 conventional PCI endpoint [ 0.412218] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 conventional PCI endpoint [ 0.412341] pci 0000:00:14.0: BAR 0 [mem 0xa2b00000-0xa2b0ffff 64bit] [ 0.412753] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.413121] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 conventional PCI endpoint [ 0.413322] pci 0000:00:1a.0: BAR 0 [mem 0xa2b12000-0xa2b123ff] [ 0.413817] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.414141] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 PCIe Root Port [ 0.414382] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.414578] pci 0000:00:1c.0: bridge window [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.415004] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.415518] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 PCIe Root Port [ 0.415805] pci 0000:00:1c.2: PCI bridge to [bus 02-06] [ 0.415965] pci 0000:00:1c.2: bridge window [mem 0xa2000000-0xa29fffff] [ 0.416150] pci 0000:00:1c.2: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.416516] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.417042] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 conventional PCI endpoint [ 0.417281] pci 0000:00:1d.0: BAR 0 [mem 0xa2b11000-0xa2b113ff] [ 0.417739] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.418105] pci 0000:00:1f.0: [8086:8c52] type 00 class 0x060100 conventional PCI endpoint [ 0.419773] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 conventional PCI endpoint [ 0.420004] pci 0000:00:1f.2: BAR 0 [io 0x3048-0x304f] [ 0.420172] pci 0000:00:1f.2: BAR 1 [io 0x3054-0x3057] [ 0.420297] pci 0000:00:1f.2: BAR 2 [io 0x3040-0x3047] [ 0.420501] pci 0000:00:1f.2: BAR 3 [io 0x3050-0x3053] [ 0.420669] pci 0000:00:1f.2: BAR 4 [io 0x3020-0x303f] [ 0.420839] pci 0000:00:1f.2: BAR 5 [mem 0xa2b10000-0xa2b107ff] [ 0.421148] pci 0000:00:1f.2: PME# supported from D3hot [ 0.421412] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 conventional PCI endpoint [ 0.421659] pci 0000:00:1f.3: BAR 0 [mem 0xa2b13000-0xa2b130ff 64bit] [ 0.421895] pci 0000:00:1f.3: BAR 4 [io 0x3000-0x301f] [ 0.422523] pci 0000:01:00.0: [14e4:165f] type 00 class 0x020000 PCIe Endpoint [ 0.422849] pci 0000:01:00.0: BAR 0 [mem 0xa2a30000-0xa2a3ffff 64bit pref] [ 0.423111] pci 0000:01:00.0: BAR 2 [mem 0xa2a40000-0xa2a4ffff 64bit pref] [ 0.423381] pci 0000:01:00.0: BAR 4 [mem 0xa2a50000-0xa2a5ffff 64bit pref] [ 0.423644] pci 0000:01:00.0: ROM [mem 0x00000000-0x0003ffff pref] [ 0.424201] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.424994] pci 0000:01:00.1: [14e4:165f] type 00 class 0x020000 PCIe Endpoint [ 0.427423] pci 0000:01:00.1: BAR 0 [mem 0xa2a00000-0xa2a0ffff 64bit pref] [ 0.427679] pci 0000:01:00.1: BAR 2 [mem 0xa2a10000-0xa2a1ffff 64bit pref] [ 0.427941] pci 0000:01:00.1: BAR 4 [mem 0xa2a20000-0xa2a2ffff 64bit pref] [ 0.428256] pci 0000:01:00.1: ROM [mem 0x00000000-0x0003ffff pref] [ 0.428819] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold [ 0.429617] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.430395] pci 0000:02:00.0: [1912:0013] type 01 class 0x060400 PCIe Switch Upstream Port [ 0.431705] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 0.432065] pci 0000:02:00.0: bridge window [mem 0xa2000000-0xa29fffff] [ 0.432511] pci 0000:02:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.434454] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.436020] pci 0000:00:1c.2: PCI bridge to [bus 02-06] [ 0.437445] pci 0000:03:00.0: [1912:0013] type 01 class 0x060400 PCIe Switch Downstream Port [ 0.438880] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 0.439262] pci 0000:03:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.439755] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.441920] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.443781] pci 0000:03:01.0: [1912:0013] type 01 class 0x060400 PCIe Switch Downstream Port [ 0.445200] pci 0000:03:01.0: PCI bridge to [bus 06] [ 0.445523] pci 0000:03:01.0: bridge window [mem 0xa2900000-0xa29fffff] [ 0.448262] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold [ 0.451928] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 0.453778] pci 0000:04:00.0: [1912:0012] type 01 class 0x060400 PCIe to PCI/PCI-X bridge [ 0.456209] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.456526] pci 0000:04:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.457017] pci 0000:04:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.460380] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 0.462026] pci_bus 0000:05: extended config space not accessible [ 0.462380] pci 0000:05:00.0: [102b:0534] type 00 class 0x030000 conventional PCI endpoint [ 0.463037] pci 0000:05:00.0: BAR 0 [mem 0xa1000000-0xa1ffffff pref] [ 0.463422] pci 0000:05:00.0: BAR 1 [mem 0xa2800000-0xa2803fff] [ 0.463860] pci 0000:05:00.0: BAR 2 [mem 0xa2000000-0xa27fffff] [ 0.465382] pci 0000:05:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.468995] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.471302] pci 0000:06:00.0: [1912:0011] type 00 class 0x050000 conventional PCI endpoint [ 0.471966] pci 0000:06:00.0: BAR 0 [mem 0xa2901000-0xa2901fff] [ 0.472344] pci 0000:06:00.0: BAR 1 [mem 0xa2900000-0xa290007f] [ 0.474834] pci 0000:06:00.0: PME# supported from D3hot [ 0.476003] pci 0000:03:01.0: PCI bridge to [bus 06] [ 0.477765] pci_bus 0000:00: on NUMA node 0 [ 0.477972] xen: registering gsi 13 triggering 1 polarity 0 [ 0.478977] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.479197] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.479339] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.479549] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.479763] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.479905] ACPI: PCI: Interrupt link LNKE disabled [ 0.480144] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.480262] ACPI: PCI: Interrupt link LNKF disabled [ 0.480468] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.480610] ACPI: PCI: Interrupt link LNKG disabled [ 0.480815] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.481453] xen:balloon: Initialising balloon driver [ 0.482323] iommu: Default domain type: Translated [ 0.482466] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.482659] SCSI subsystem initialized [ 0.482659] libata version 3.00 loaded. [ 0.482659] ACPI: bus type USB registered [ 0.482659] usbcore: registered new interface driver usbfs [ 0.482659] usbcore: registered new interface driver hub [ 0.482745] usbcore: registered new device driver usb [ 0.482893] pps_core: LinuxPPS API ver. 1 registered [ 0.483036] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.483267] PTP clock support registered [ 0.484292] Advanced Linux Sound Architecture Driver Initialized. [ 0.484599] NetLabel: Initializing [ 0.484735] NetLabel: domain hash size = 128 [ 0.484872] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.484872] NetLabel: unlabeled traffic allowed by default [ 0.485293] PCI: Using ACPI for IRQ routing [ 0.502090] PCI: pci_cache_line_size set to 64 bytes [ 0.502713] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.502716] e820: reserve RAM buffer [mem 0x20061000-0x23ffffff] [ 0.503423] pci 0000:05:00.0: vgaarb: setting as boot VGA device [ 0.503573] pci 0000:05:00.0: vgaarb: bridge control possible [ 0.503719] pci 0000:05:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.503719] vgaarb: loaded [ 0.503719] clocksource: Switched to clocksource tsc-early [ 0.504283] VFS: Disk quotas dquot_6.6.0 [ 0.504283] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.504283] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.504283] pnp: PnP ACPI init [ 0.505214] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.505364] system 00:00: [io 0xffff] has been reserved [ 0.505504] system 00:00: [io 0xffff] has been reserved [ 0.505645] system 00:00: [io 0xffff] has been reserved [ 0.505783] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.505926] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.506121] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.506288] xen: registering gsi 8 triggering 1 polarity 0 [ 0.506339] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.506767] xen: registering gsi 3 triggering 1 polarity 0 [ 0.507005] xen: registering gsi 4 triggering 1 polarity 0 [ 0.507008] Already setup the GSI :4 [ 0.507324] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.507472] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.507618] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.507762] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.507907] system 00:06: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.508052] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.508197] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.508349] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved [ 0.508494] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.508639] system 00:06: [mem 0xa0000000-0xa0000fff] has been reserved [ 0.508777] system 00:06: [mem 0xa0020000-0xa002ffff] has been reserved [ 0.509743] pnp: PnP ACPI: found 7 devices [ 0.532342] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.532507] NET: Registered PF_INET protocol family [ 0.532678] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.533008] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.533222] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.533419] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.533615] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.533809] TCP: Hash tables configured (established 4096 bind 4096) [ 0.533967] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.534114] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.534288] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.534646] RPC: Registered named UNIX socket transport module. [ 0.534824] RPC: Registered udp transport module. [ 0.534962] RPC: Registered tcp transport module. [ 0.535101] RPC: Registered tcp-with-tls transport module. [ 0.535242] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.535714] pci 0000:00:1c.0: bridge window [mem 0xa0100000-0xa01fffff]: assigned [ 0.535894] pci 0000:01:00.0: ROM [mem 0xa0100000-0xa013ffff pref]: assigned [ 0.536040] pci 0000:01:00.1: ROM [mem 0xa0140000-0xa017ffff pref]: assigned [ 0.536185] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.536388] pci 0000:00:1c.0: bridge window [mem 0xa0100000-0xa01fffff] [ 0.536541] pci 0000:00:1c.0: bridge window [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.536733] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.537016] pci 0000:04:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.537266] pci 0000:04:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.537640] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 0.537956] pci 0000:03:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.538199] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.538576] pci 0000:03:01.0: PCI bridge to [bus 06] [ 0.538857] pci 0000:03:01.0: bridge window [mem 0xa2900000-0xa29fffff] [ 0.539385] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 0.539656] pci 0000:02:00.0: bridge window [mem 0xa2000000-0xa29fffff] [ 0.539893] pci 0000:02:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.540318] pci 0000:00:1c.2: PCI bridge to [bus 02-06] [ 0.540472] pci 0000:00:1c.2: bridge window [mem 0xa2000000-0xa29fffff] [ 0.540625] pci 0000:00:1c.2: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.540816] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.540995] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.541138] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.541288] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff window] [ 0.541434] pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa01fffff] [ 0.541580] pci_bus 0000:01: resource 2 [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.541752] pci_bus 0000:02: resource 1 [mem 0xa2000000-0xa29fffff] [ 0.541895] pci_bus 0000:02: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.542068] pci_bus 0000:03: resource 1 [mem 0xa2000000-0xa29fffff] [ 0.542211] pci_bus 0000:03: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.542387] pci_bus 0000:04: resource 1 [mem 0xa2000000-0xa28fffff] [ 0.542565] pci_bus 0000:04: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.542738] pci_bus 0000:05: resource 1 [mem 0xa2000000-0xa28fffff] [ 0.542876] pci_bus 0000:05: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.543048] pci_bus 0000:06: resource 1 [mem 0xa2900000-0xa29fffff] [ 0.543326] xen: registering gsi 16 triggering 0 polarity 1 [ 0.543345] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.544824] xen: registering gsi 16 triggering 0 polarity 1 [ 0.544828] Already setup the GSI :16 [ 0.555398] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x7c0 took 10373 usecs [ 0.557629] xen: registering gsi 23 triggering 0 polarity 1 [ 0.557649] xen: --> pirq=23 -> irq=23 (gsi=23) [ 0.569429] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x7c0 took 11572 usecs [ 0.569910] PCI: CLS 64 bytes, default 64 [ 0.570075] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.570121] Unpacking initramfs... [ 0.570219] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.570597] kvm_intel: VMX not supported by CPU 3 [ 0.570738] kvm_amd: CPU 3 isn't AMD or Hygon [ 0.570915] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c94d9afcf4, max_idle_ns: 440795231738 ns [ 0.571139] clocksource: Switched to clocksource tsc [ 0.572251] Initialise system trusted keyrings [ 0.572511] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.572833] NFS: Registering the id_resolver key type [ 0.572992] Key type id_resolver registered [ 0.573131] Key type id_legacy registered [ 0.573312] 9p: Installing v9fs 9p2000 file system support [ 0.585733] Key type asymmetric registered [ 0.585894] Asymmetric key parser 'x509' registered [ 0.586055] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.586237] io scheduler mq-deadline registered [ 0.586375] io scheduler kyber registered [ 0.586837] xen: registering gsi 16 triggering 0 polarity 1 [ 0.586845] Already setup the GSI :16 [ 0.587209] pcieport 0000:00:1c.0: PME: Signaling with IRQ 50 [ 0.587587] xen: registering gsi 18 triggering 0 polarity 1 [ 0.587608] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.587778] pcieport 0000:00:1c.2: PME: Signaling with IRQ 51 [ 0.592291] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.592673] ACPI: button: Power Button [PWRF] [ 0.593423] Monitor-Mwait will be used to enter C-1 state [ 0.593426] Monitor-Mwait will be used to enter C-2 state [ 0.594289] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.594439] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.594793] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.594948] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.595373] xen:xen_evtchn: Event-channel device installed [ 0.595577] xen_pciback: backend is vpci [ 0.596158] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.596434] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.597159] hpet_acpi_add: no address or irqs in _CRS [ 0.597360] Non-volatile memory driver v1.3 [ 0.598673] loop: module loaded [ 0.602504] ahci 0000:00:1f.2: version 3.0 [ 0.602595] xen: registering gsi 19 triggering 0 polarity 1 [ 0.602620] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.602794] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.602988] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 6 Gbps, SATA mode [ 0.603164] ahci 0000:00:1f.2: 3/6 ports implemented (port mask 0x31) [ 0.603312] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 0.607361] scsi host0: ahci [ 0.607722] scsi host1: ahci [ 0.608022] scsi host2: ahci [ 0.608298] scsi host3: ahci [ 0.608570] scsi host4: ahci [ 0.608841] scsi host5: ahci [ 0.609023] ata1: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10100 irq 53 lpm-pol 4 [ 0.609201] ata2: DUMMY [ 0.609331] ata3: DUMMY [ 0.609463] ata4: DUMMY [ 0.609593] ata5: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10300 irq 53 lpm-pol 4 [ 0.609770] ata6: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10380 irq 53 lpm-pol 0 [ 0.610141] tun: Universal TUN/TAP device driver, 1.6 [ 0.610489] xen: registering gsi 16 triggering 0 polarity 1 [ 0.610496] Already setup the GSI :16 [ 0.637150] tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 54:9f:35:05:fd:58 [ 0.637344] tg3 0000:01:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 0.637526] tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 0.637708] tg3 0000:01:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 0.638326] xen: registering gsi 17 triggering 0 polarity 1 [ 0.638352] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.648369] Freeing initrd memory: 20864K [ 0.681210] tg3 0000:01:00.1 eth1: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 54:9f:35:05:fd:5a [ 0.681398] tg3 0000:01:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 0.681584] tg3 0000:01:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 0.681768] tg3 0000:01:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit] [ 0.682228] e100: Intel(R) PRO/100 Network Driver [ 0.682368] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.682517] sky2: driver version 1.30 [ 0.682675] xen_netfront: Initialising Xen virtual ethernet driver [ 0.683117] xen: registering gsi 16 triggering 0 polarity 1 [ 0.683122] Already setup the GSI :16 [ 0.683179] xen: registering gsi 16 triggering 0 polarity 1 [ 0.683232] xen: registering gsi 23 triggering 0 polarity 1 [ 0.683237] Already setup the GSI :23 [ 0.683307] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.683405] Already setup the GSI :16 [ 0.683487] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.683884] ehci-pci 0000:00:1d.0: debug port 2 [ 0.688011] ehci-pci 0000:00:1d.0: irq 23, io mem 0xa2b11000 [ 0.693924] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.694134] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 0.694306] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.694478] usb usb1: Product: EHCI Host Controller [ 0.694617] usb usb1: Manufacturer: Linux 6.11.0+ ehci_hcd [ 0.694753] usb usb1: SerialNumber: 0000:00:1d.0 [ 0.695078] hub 1-0:1.0: USB hub found [ 0.695230] hub 1-0:1.0: 2 ports detected [ 0.695580] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.695811] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 2 [ 0.696026] ehci-pci 0000:00:1a.0: debug port 2 [ 0.700152] ehci-pci 0000:00:1a.0: irq 16, io mem 0xa2b12000 [ 0.705952] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.706163] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 0.706334] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.706508] usb usb2: Product: EHCI Host Controller [ 0.706646] usb usb2: Manufacturer: Linux 6.11.0+ ehci_hcd [ 0.706786] usb usb2: SerialNumber: 0000:00:1a.0 [ 0.707089] hub 2-0:1.0: USB hub found [ 0.707238] hub 2-0:1.0: 2 ports detected [ 0.707546] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.707783] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.709050] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.709515] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.709743] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.709932] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.710143] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 0.710320] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.710492] usb usb3: Product: xHCI Host Controller [ 0.710631] usb usb3: Manufacturer: Linux 6.11.0+ xhci-hcd [ 0.710770] usb usb3: SerialNumber: 0000:00:14.0 [ 0.711085] hub 3-0:1.0: USB hub found [ 0.711244] hub 3-0:1.0: 10 ports detected [ 0.714489] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.11 [ 0.714666] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.714839] usb usb4: Product: xHCI Host Controller [ 0.714989] usb usb4: Manufacturer: Linux 6.11.0+ xhci-hcd [ 0.715131] usb usb4: SerialNumber: 0000:00:14.0 [ 0.715413] hub 4-0:1.0: USB hub found [ 0.715565] hub 4-0:1.0: 2 ports detected [ 0.716104] usbcore: registered new interface driver usblp [ 0.716256] usbcore: registered new interface driver usb-storage [ 0.716521] i8042: PNP: No PS/2 controller found. [ 0.716795] rtc_cmos 00:02: RTC can wake from S4 [ 0.717411] rtc_cmos 00:02: registered as rtc0 [ 0.717593] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram [ 0.717765] device-mapper: uevent: version 1.0.3 [ 0.717830] xen: registering gsi 18 triggering 0 polarity 1 [ 0.717922] Already setup the GSI :18 [ 0.718005] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.718150] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.718237] intel_pstate: CPU model not supported [ 0.718516] hid: raw HID events driver (C) Jiri Kosina [ 0.718745] usbcore: registered new interface driver usbhid [ 0.718932] usbhid: USB HID core driver [ 0.719558] Initializing XFRM netlink socket [ 0.719713] NET: Registered PF_INET6 protocol family [ 0.720193] Segment Routing with IPv6 [ 0.720334] In-situ OAM (IOAM) with IPv6 [ 0.720519] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.720755] NET: Registered PF_PACKET protocol family [ 0.720937] 9pnet: Installing 9P2000 support [ 0.721086] Key type dns_resolver registered [ 0.721436] IPI shorthand broadcast: enabled [ 0.723394] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.723599] sched_clock: Marking stable (668008091, 54865049)->(725824270, -2951130) [ 0.724078] registered taskstats version 1 [ 0.724217] Loading compiled-in X.509 certificates [ 0.725316] PM: Magic number: 8:24:141 [ 0.725502] acpi device:12: hash matches [ 0.725656] printk: legacy console [netcon0] enabled [ 0.725797] netconsole: network logging started [ 0.726168] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.736551] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.736859] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.737055] ALSA device list: [ 0.737191] No soundcards found. [ 0.737748] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.919154] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.928951] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.944934] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.952934] usb 3-9: new high-speed USB device number 2 using xhci_hcd [ 0.969201] ata1.00: ATA-8: TOSHIBA MG03ACA100, FL1D, max UDMA/100 [ 0.969988] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.971366] ata1.00: configured for UDMA/100 [ 0.981726] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MG03ACA1 FL1D PQ: 0 ANSI: 5 [ 0.982244] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.982249] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.982567] sd 0:0:0:0: [sda] Write Protect is off [ 0.982708] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.982728] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.982959] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.055513] usb 1-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.055693] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.056257] hub 1-1:1.0: USB hub found [ 1.056495] hub 1-1:1.0: 6 ports detected [ 1.070337] usb 2-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.070508] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.070871] hub 2-1:1.0: USB hub found [ 1.071110] hub 2-1:1.0: 4 ports detected [ 1.076843] usb 3-9: New USB device found, idVendor=0624, idProduct=0248, bcdDevice= 0.00 [ 1.077030] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.077174] usb 3-9: Product: Gadget USB HUB [ 1.077307] usb 3-9: Manufacturer: no manufacturer [ 1.077444] usb 3-9: SerialNumber: 0123456789 [ 1.078475] hub 3-9:1.0: USB hub found [ 1.078701] hub 3-9:1.0: 6 ports detected [ 1.176889] sda: sda1 sda2 < sda5 > [ 1.177346] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.287237] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.290056] ata5.00: ATAPI: HL-DT-ST DVD+/-RW GTA0N, A3B0, max UDMA/100 [ 1.293498] ata5.00: configured for UDMA/100 [ 1.308377] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD+-RW GTA0N A3B0 PQ: 0 ANSI: 5 [ 1.336405] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.336588] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.349274] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.349385] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 1.368913] usb 3-9.1: new high-speed USB device number 3 using xhci_hcd [ 1.452900] usb 3-9.1: New USB device found, idVendor=0624, idProduct=0249, bcdDevice= 0.00 [ 1.453081] usb 3-9.1: New USB device strings: Mfr=4, Product=5, SerialNumber=6 [ 1.453255] usb 3-9.1: Product: Keyboard/Mouse Function [ 1.453396] usb 3-9.1: Manufacturer: Avocent [ 1.453534] usb 3-9.1: SerialNumber: 20120917 [ 1.460391] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/0003:0624:0249.0001/input/input1 [ 1.511409] hid-generic 0003:0624:0249.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input0 [ 1.512379] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/0003:0624:0249.0002/input/input2 [ 1.512747] hid-generic 0003:0624:0249.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input1 [ 1.513676] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.2/0003:0624:0249.0003/input/input3 [ 1.514021] hid-generic 0003:0624:0249.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input2 [ 1.655203] ata6: SATA link down (SStatus 0 SControl 300) [ 1.656582] Freeing unused kernel image (initmem) memory: 2708K [ 1.656744] Write protecting the kernel read-only data: 24576k [ 1.672351] Freeing unused kernel image (rodata/data gap) memory: 1896K [ 1.873145] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.873335] Run /init as init process [ 1.873476] with arguments: [ 1.873477] /init [ 1.873478] placeholder [ 1.873479] with environment: [ 1.873480] HOME=/ [ 1.873481] TERM=linux [ 2.103112] tg3 0000:01:00.0 enx549f3505fd58: renamed from eth0 [ 2.104623] tg3 0000:01:00.1 enx549f3505fd5a: renamed from eth1 [ 2.761572] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 2.766169] EXT4-fs (dm-0): mounted filesystem 75b4d51f-7250-46ec-9e84-cb2807a0eeba ro with ordered data mode. Quota mode: none. [ 6.434069] EXT4-fs (dm-0): re-mounted 75b4d51f-7250-46ec-9e84-cb2807a0eeba r/w. Quota mode: none. [ 7.259138] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 7.267916] EXT4-fs (sda1): mounted filesystem 84bdd1be-8060-4061-9a3c-41999101f95d r/w with ordered data mode. Quota mode: none. [ 7.333822] Adding 1949692k swap on /dev/mapper/godello0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 8.814233] xenbr0: port 1(enx549f3505fd58) entered blocking state [ 8.814414] xenbr0: port 1(enx549f3505fd58) entered disabled state [ 8.814561] tg3 0000:01:00.0 enx549f3505fd58: entered allmulticast mode [ 8.814738] tg3 0000:01:00.0 enx549f3505fd58: entered promiscuous mode [ 12.503018] tg3 0000:01:00.0 enx549f3505fd58: Link is up at 1000 Mbps, full duplex [ 12.503093] xenbr0: port 1(enx549f3505fd58) entered blocking state [ 12.503265] tg3 0000:01:00.0 enx549f3505fd58: Flow control is off for TX and off for RX [ 12.503273] xenbr0: port 1(enx549f3505fd58) entered forwarding state [ 12.503279] tg3 0000:01:00.0 enx549f3505fd58: EEE is disabled