[ 0.000000] microcode: microcode updated early to revision 0x42e, date = 2019-03-14 [ 0.000000] Linux version 6.1.0-25-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.106-3 (2024-08-26) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007de2bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1800.037 MHz processor [ 0.000921] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000926] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000936] last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.001076] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001721] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved [ 0.001730] last_pfn = 0x7de2c max_arch_pfn = 0x400000000 [ 0.018538] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] [ 0.018563] Using GB pages for direct mapping [ 0.019000] RAMDISK: [mem 0x3310b000-0x3587cfff] [ 0.019008] ACPI: Early table checksum verification disabled [ 0.019013] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.019019] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019028] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019036] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.019042] ACPI: FACS 0x000000007E1D8080 000040 [ 0.019046] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.019052] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.019057] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.019062] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.019067] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.019072] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.019078] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.019083] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.019088] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.019094] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.019099] ACPI: DMAR 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.019104] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.019108] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.019110] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.019112] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.019113] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.019115] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.019116] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.019118] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.019119] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.019120] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.019122] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.019123] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.019125] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.019126] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.019127] ACPI: Reserving DMAR table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.019129] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.019198] No NUMA configuration found [ 0.019199] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] [ 0.019215] NODE_DATA(0) allocated [mem 0x27ffd5000-0x27fffffff] [ 0.019675] Zone ranges: [ 0.019677] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.019679] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.019682] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.019684] Device empty [ 0.019686] Movable zone start for each node [ 0.019690] Early memory node ranges [ 0.019691] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.019693] node 0: [mem 0x0000000000100000-0x000000007de2bfff] [ 0.019695] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.019698] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.019706] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.019764] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.027999] On node 0, zone Normal: 8660 pages in unavailable ranges [ 0.028294] ACPI: PM-Timer IO Port: 0x408 [ 0.028307] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.028309] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.028311] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.028312] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.028325] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.028331] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.028334] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028337] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.028344] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028346] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.028352] TSC deadline timer available [ 0.028354] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.028374] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028377] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.028379] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.028380] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.028381] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.028384] PM: hibernation: Registered nosave memory: [mem 0x7de2c000-0x7debafff] [ 0.028385] PM: hibernation: Registered nosave memory: [mem 0x7debb000-0x7dfc3fff] [ 0.028387] PM: hibernation: Registered nosave memory: [mem 0x7dfc4000-0x7e1e0fff] [ 0.028388] PM: hibernation: Registered nosave memory: [mem 0x7e1e1000-0x7f36afff] [ 0.028389] PM: hibernation: Registered nosave memory: [mem 0x7f36b000-0x7f7fffff] [ 0.028390] PM: hibernation: Registered nosave memory: [mem 0x7f800000-0x7fffffff] [ 0.028391] PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff] [ 0.028393] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.028394] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff] [ 0.028395] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff] [ 0.028396] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.028399] [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.028400] Booting paravirtualized kernel on bare hardware [ 0.028404] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.035687] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.036085] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.036094] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.036098] pcpu-alloc: [0] 0 1 2 3 [ 0.036138] Fallback order for Node 0: 0 [ 0.036143] Built 1 zonelists, mobility grouping on. Total pages: 2055603 [ 0.036145] Policy zone: Normal [ 0.036146] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.036216] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64", will be passed to user space. [ 0.036230] random: crng init done [ 0.037280] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.037848] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.037936] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.037949] software IO TLB: area num 4. [ 0.079653] Memory: 2086372K/8353556K available (14342K kernel code, 2335K rwdata, 9072K rodata, 2796K init, 17396K bss, 305204K reserved, 0K cma-reserved) [ 0.079865] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.079886] Kernel/User page tables isolation: enabled [ 0.079940] ftrace: allocating 40246 entries in 158 pages [ 0.090284] ftrace: allocated 158 pages with 5 groups [ 0.091231] Dynamic Preempt: voluntary [ 0.091275] rcu: Preemptible hierarchical RCU implementation. [ 0.091276] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.091279] Trampoline variant of Tasks RCU enabled. [ 0.091279] Rude variant of Tasks RCU enabled. [ 0.091280] Tracing variant of Tasks RCU enabled. [ 0.091281] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.091282] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.098710] NR_IRQS: 524544, nr_irqs: 864, preallocated irqs: 16 [ 0.098918] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.103474] Console: colour VGA+ 80x25 [ 1.027914] printk: console [ttyS0] enabled [ 1.032121] ACPI: Core revision 20220331 [ 1.036770] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 1.045908] APIC: Switch to symmetric I/O mode setup [ 1.050889] DMAR: Host address width 46 [ 1.054739] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 1.060066] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de [ 1.067986] DMAR: RMRR base: 0x0000007de91000 end: 0x0000007de9dfff [ 1.074254] DMAR: ATSR flags: 0x0 [ 1.077573] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 1.083849] DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0 [ 1.090207] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0 [ 1.096560] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 1.101959] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 1.111091] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 1.116487] x2apic enabled [ 1.119214] Switched APIC routing to cluster x2apic. [ 1.124721] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.149906] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f24c7fe75, max_idle_ns: 440795225104 ns [ 1.160422] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.07 BogoMIPS (lpj=7200148) [ 1.164453] CPU0: Thermal monitoring enabled (TM1) [ 1.168505] process: using mwait in idle threads [ 1.172422] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 1.176419] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 1.180423] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.184421] Spectre V2 : Mitigation: Retpolines [ 1.188419] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.192419] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.196419] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 1.200421] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.204420] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 1.208420] MDS: Mitigation: Clear CPU buffers [ 1.212419] MMIO Stale Data: Unknown: No mitigations [ 1.216425] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.220419] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.224419] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.228420] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.232419] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.260973] Freeing SMP alternatives memory: 36K [ 1.264420] pid_max: default: 32768 minimum: 301 [ 1.268453] LSM: Security Framework initializing [ 1.272437] landlock: Up and running. [ 1.276419] Yama: disabled by default; enable with sysctl kernel.yama.* [ 1.280451] AppArmor: AppArmor initialized [ 1.284421] TOMOYO Linux initialized [ 1.288426] LSM support for eBPF active [ 1.292466] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.296435] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.304970] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2403 v2 @ 1.80GHz (family: 0x6, model: 0x3e, stepping: 0x4) [ 1.308609] cblist_init_generic: Setting adjustable number of callback queues. [ 1.312421] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.316451] cblist_init_generic: Setting adjustable number of callback queues. [ 1.320420] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.324443] cblist_init_generic: Setting adjustable number of callback queues. [ 1.328420] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.332440] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 1.336421] ... version: 3 [ 1.340420] ... bit width: 48 [ 1.344420] ... generic registers: 8 [ 1.348420] ... value mask: 0000ffffffffffff [ 1.352420] ... max period: 00007fffffffffff [ 1.356420] ... fixed-purpose events: 3 [ 1.360419] ... event mask: 00000007000000ff [ 1.364652] signal: max sigframe size: 1776 [ 1.368444] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 1.372452] rcu: Hierarchical SRCU implementation. [ 1.376420] rcu: Max phase no-delay instances is 1000. [ 1.381093] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.384513] smp: Bringing up secondary CPUs ... [ 1.388571] x86: Booting SMP configuration: [ 1.392426] .... node #0, CPUs: #1 #2 #3 [ 1.407774] smp: Brought up 1 node, 4 CPUs [ 1.412421] smpboot: Max logical packages: 1 [ 1.416420] smpboot: Total of 4 processors activated (14400.29 BogoMIPS) [ 1.441299] node 0 deferred pages initialised in 20ms [ 1.444881] devtmpfs: initialized [ 1.448500] x86/mm: Memory block size: 128MB [ 1.453457] ACPI: PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 1.456473] ACPI: PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 1.460575] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.464433] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.468480] pinctrl core: initialized pinctrl subsystem [ 1.473333] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.476700] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 1.480579] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.484581] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.488429] audit: initializing netlink subsys (disabled) [ 1.492435] audit: type=2000 audit(1727472782.404:1): state=initialized audit_enabled=0 res=1 [ 1.492570] thermal_sys: Registered thermal governor 'fair_share' [ 1.496424] thermal_sys: Registered thermal governor 'bang_bang' [ 1.500421] thermal_sys: Registered thermal governor 'step_wise' [ 1.504420] thermal_sys: Registered thermal governor 'user_space' [ 1.508420] thermal_sys: Registered thermal governor 'power_allocator' [ 1.512437] cpuidle: using governor ladder [ 1.520425] cpuidle: using governor menu [ 1.524394] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 1.524421] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.528523] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 1.532422] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 1.536430] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 1.540842] PCI: Using configuration type 1 for base access [ 1.544517] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 1.549736] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.552481] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 1.556423] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 1.564421] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 1.572420] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 1.579054] ACPI: Added _OSI(Module Device) [ 1.580423] ACPI: Added _OSI(Processor Device) [ 1.584420] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.592421] ACPI: Added _OSI(Processor Aggregator Device) [ 1.712574] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.742087] ACPI: Interpreter enabled [ 1.744442] ACPI: PM: (supports S0 S1 S4 S5) [ 1.748421] ACPI: Using IOAPIC for interrupt routing [ 1.756531] HEST: Table parsing has been initialized. [ 1.760542] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 1.764424] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.776420] PCI: Using E820 reservations for host bridge windows [ 1.780975] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.788529] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PRAD], AE_NOT_FOUND (20220331/psargs-330) [ 1.792424] ACPI Error: Aborting method \_GPE._L24 due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 1.796423] ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_L24] (20220331/evgpe-511) [ 1.800418] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.804418] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.812511] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR] [ 1.820571] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability] [ 1.828421] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.836777] PCI host bridge to bus 0000:00 [ 1.840423] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.848420] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.856420] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.860420] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.868421] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 1.876420] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.884420] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.892420] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.900421] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.904451] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.908504] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.916544] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.924520] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.928588] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.936518] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.940587] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.948458] pci 0000:00:03.0: enabling Extended Tags [ 1.952485] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.956574] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.964437] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.972566] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.976436] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.984555] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 1.992436] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 1.996554] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 2.004436] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 2.008557] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 2.016436] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 2.024554] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 2.028436] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 2.036556] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 2.040439] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 2.048555] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 2.056436] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 2.060554] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 2.068550] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 2.072544] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 2.080432] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 2.088570] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 2.092541] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 2.100562] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 2.104438] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 2.112489] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 2.116509] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 2.124438] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 2.132488] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 2.136522] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 2.144436] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 2.148511] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.156530] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 2.160520] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.168452] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 2.172422] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 2.180524] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 2.184520] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.192444] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 2.196421] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 2.204541] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 2.208437] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 2.216512] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.220524] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.228565] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 2.232636] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 2.240433] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 2.244427] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 2.252427] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 2.256426] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 2.264427] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 2.268427] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 2.272464] pci 0000:00:1f.2: PME# supported from D3hot [ 2.280511] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 2.284438] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 2.292444] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 2.296496] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 2.304441] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 2.312583] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.316471] pci 0000:00:01.1: PCI bridge to [bus 02] [ 2.320470] pci 0000:00:03.0: PCI bridge to [bus 03] [ 2.324504] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 2.332443] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 2.340434] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 2.348429] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 2.352446] pci 0000:04:00.0: enabling Extended Tags [ 2.356526] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 2.364420] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 2.376676] pci 0000:00:11.0: PCI bridge to [bus 04] [ 2.380423] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 2.384428] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 2.392517] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 2.400455] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 2.404457] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 2.412439] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 2.416610] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 2.424642] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 2.428423] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 2.436422] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 2.444521] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 2.448455] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 2.456457] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 2.460439] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 2.468606] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 2.472636] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 2.476423] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 2.484422] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 2.492442] pci_bus 0000:07: extended config space not accessible [ 2.496446] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 2.504436] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 2.508428] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 2.516429] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 2.524467] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.532531] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 2.536425] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 2.544427] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 2.552420] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 2.560420] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 2.568420] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 2.576420] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 2.588420] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 2.596420] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 2.604420] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 2.612420] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 2.625211] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 2.628424] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.640438] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 2.648420] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 2.656486] PCI host bridge to bus 0000:ff [ 2.660421] pci_bus 0000:ff: root bus resource [bus ff] [ 2.664434] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 2.672499] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 2.676489] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 2.684480] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 2.688479] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 2.696481] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 2.700486] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 2.708477] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 2.716478] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 2.720478] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 2.728481] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 2.732477] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 2.740481] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 2.744482] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 2.752496] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 2.756508] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 2.764502] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 2.768503] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 2.776506] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 2.780502] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 2.788504] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 2.792502] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 2.800510] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 2.804504] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 2.812502] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 2.816502] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 2.824504] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 2.828503] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 2.836500] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 2.840479] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 2.848485] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 2.852480] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 2.860482] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 2.864479] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 2.872477] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 2.880639] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 2.884473] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 2.892471] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 2.896470] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 2.904470] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 2.908471] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 2.916482] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 2.920471] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 2.930044] iommu: Default domain type: Translated [ 2.932421] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.940519] pps_core: LinuxPPS API ver. 1 registered [ 2.944420] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.952423] PTP clock support registered [ 2.956359] EDAC MC: Ver: 3.0.0 [ 2.960680] NetLabel: Initializing [ 2.964086] NetLabel: domain hash size = 128 [ 2.968422] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 2.976442] NetLabel: unlabeled traffic allowed by default [ 2.980420] PCI: Using ACPI for IRQ routing [ 2.991420] PCI: pci_cache_line_size set to 64 bytes [ 2.991546] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] [ 2.991549] e820: reserve RAM buffer [mem 0x7de2c000-0x7fffffff] [ 2.992458] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 2.996418] pci 0000:07:01.0: vgaarb: bridge control possible [ 2.996418] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.012428] vgaarb: loaded [ 3.017143] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 3.024420] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 3.032420] clocksource: Switched to clocksource tsc-early [ 3.038126] VFS: Disk quotas dquot_6.6.0 [ 3.042075] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.049140] AppArmor: AppArmor Filesystem Enabled [ 3.053881] pnp: PnP ACPI init [ 3.057088] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 3.063707] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 3.070316] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 3.076931] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 3.083672] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 3.090773] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 3.096700] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 3.103976] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 3.110096] pnp 00:07: [dma 0 disabled] [ 3.110335] pnp 00:08: [dma 0 disabled] [ 3.110611] system 00:09: [io 0x0400-0x0453] has been reserved [ 3.116538] system 00:09: [io 0x0458-0x047f] has been reserved [ 3.122455] system 00:09: [io 0x1180-0x119f] has been reserved [ 3.128374] system 00:09: [io 0x0500-0x057f] has been reserved [ 3.134294] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 3.140905] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 3.147864] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 3.154587] system 00:0a: [io 0x0454-0x0457] has been reserved [ 3.160789] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 3.168036] pnp: PnP ACPI: found 12 devices [ 3.178754] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.187719] NET: Registered PF_INET protocol family [ 3.192782] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 3.203114] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 3.211678] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.219502] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 3.227802] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 3.235596] TCP: Hash tables configured (established 65536 bind 65536) [ 3.242220] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 3.249774] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.256600] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.263892] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.269561] NET: Registered PF_XDP protocol family [ 3.274371] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.279343] pci 0000:00:01.1: PCI bridge to [bus 02] [ 3.284316] pci 0000:00:03.0: PCI bridge to [bus 03] [ 3.289291] pci 0000:00:11.0: PCI bridge to [bus 04] [ 3.294259] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 3.300357] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.308108] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 3.313073] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 3.319167] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 3.325958] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 3.330926] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 3.337020] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 3.343812] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 3.348781] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 3.355564] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.363309] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 3.369491] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 3.375670] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 3.381849] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 3.388027] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.394901] pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.401773] pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.408731] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.415693] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 3.421264] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.428483] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 3.434056] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 3.440321] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 3.445894] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 3.452159] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 3.458425] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.465645] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 3.471824] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 3.478003] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 3.484181] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 3.490360] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.497235] pci_bus 0000:07: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.504107] pci_bus 0000:07: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.511066] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.518119] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 3.549585] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 23826 usecs [ 3.577569] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 20081 usecs [ 3.585073] PCI: CLS 64 bytes, default 64 [ 3.589126] DMAR: No SATC found [ 3.589159] Trying to unpack rootfs image as initramfs... [ 3.592270] DMAR: dmar0: Using Queued invalidation [ 3.592351] pci 0000:00:00.0: Adding to iommu group 0 [ 3.607576] pci 0000:00:01.0: Adding to iommu group 1 [ 3.612652] pci 0000:00:01.1: Adding to iommu group 2 [ 3.617736] pci 0000:00:03.0: Adding to iommu group 3 [ 3.622816] pci 0000:00:04.0: Adding to iommu group 4 [ 3.627898] pci 0000:00:04.1: Adding to iommu group 5 [ 3.632980] pci 0000:00:04.2: Adding to iommu group 6 [ 3.638058] pci 0000:00:04.3: Adding to iommu group 7 [ 3.643135] pci 0000:00:04.4: Adding to iommu group 8 [ 3.648212] pci 0000:00:04.5: Adding to iommu group 9 [ 3.653295] pci 0000:00:04.6: Adding to iommu group 10 [ 3.658459] pci 0000:00:04.7: Adding to iommu group 11 [ 3.663624] pci 0000:00:05.0: Adding to iommu group 12 [ 3.668788] pci 0000:00:05.2: Adding to iommu group 13 [ 3.673954] pci 0000:00:05.4: Adding to iommu group 14 [ 3.679117] pci 0000:00:11.0: Adding to iommu group 15 [ 3.684304] pci 0000:00:16.0: Adding to iommu group 16 [ 3.689481] pci 0000:00:16.1: Adding to iommu group 16 [ 3.694657] pci 0000:00:1a.0: Adding to iommu group 17 [ 3.699823] pci 0000:00:1c.0: Adding to iommu group 18 [ 3.704990] pci 0000:00:1c.1: Adding to iommu group 19 [ 3.710153] pci 0000:00:1d.0: Adding to iommu group 20 [ 3.715321] pci 0000:00:1e.0: Adding to iommu group 21 [ 3.720537] pci 0000:00:1f.0: Adding to iommu group 22 [ 3.725701] pci 0000:00:1f.2: Adding to iommu group 22 [ 3.730864] pci 0000:00:1f.3: Adding to iommu group 22 [ 3.736032] pci 0000:00:1f.6: Adding to iommu group 22 [ 3.741205] pci 0000:04:00.0: Adding to iommu group 23 [ 3.746372] pci 0000:05:00.0: Adding to iommu group 24 [ 3.751536] pci 0000:06:00.0: Adding to iommu group 25 [ 3.756681] pci 0000:07:01.0: Adding to iommu group 21 [ 3.761865] pci 0000:ff:08.0: Adding to iommu group 26 [ 3.767043] pci 0000:ff:09.0: Adding to iommu group 27 [ 3.772257] pci 0000:ff:0a.0: Adding to iommu group 28 [ 3.777423] pci 0000:ff:0a.1: Adding to iommu group 28 [ 3.782589] pci 0000:ff:0a.2: Adding to iommu group 28 [ 3.787760] pci 0000:ff:0a.3: Adding to iommu group 28 [ 3.792951] pci 0000:ff:0b.0: Adding to iommu group 29 [ 3.798122] pci 0000:ff:0b.3: Adding to iommu group 29 [ 3.803316] pci 0000:ff:0c.0: Adding to iommu group 30 [ 3.808487] pci 0000:ff:0c.1: Adding to iommu group 30 [ 3.813686] pci 0000:ff:0d.0: Adding to iommu group 31 [ 3.818860] pci 0000:ff:0d.1: Adding to iommu group 31 [ 3.824055] pci 0000:ff:0e.0: Adding to iommu group 32 [ 3.829229] pci 0000:ff:0e.1: Adding to iommu group 32 [ 3.834396] pci 0000:ff:0f.0: Adding to iommu group 33 [ 3.839560] pci 0000:ff:0f.1: Adding to iommu group 34 [ 3.844726] pci 0000:ff:0f.2: Adding to iommu group 35 [ 3.849894] pci 0000:ff:0f.3: Adding to iommu group 36 [ 3.855067] pci 0000:ff:0f.4: Adding to iommu group 37 [ 3.860239] pci 0000:ff:0f.5: Adding to iommu group 38 [ 3.865406] pci 0000:ff:10.0: Adding to iommu group 39 [ 3.870585] pci 0000:ff:10.1: Adding to iommu group 40 [ 3.875753] pci 0000:ff:10.2: Adding to iommu group 41 [ 3.880917] pci 0000:ff:10.3: Adding to iommu group 42 [ 3.886085] pci 0000:ff:10.4: Adding to iommu group 43 [ 3.891255] pci 0000:ff:10.5: Adding to iommu group 44 [ 3.896421] pci 0000:ff:10.6: Adding to iommu group 45 [ 3.901586] pci 0000:ff:10.7: Adding to iommu group 46 [ 3.906797] pci 0000:ff:13.0: Adding to iommu group 47 [ 3.911969] pci 0000:ff:13.1: Adding to iommu group 47 [ 3.917138] pci 0000:ff:13.4: Adding to iommu group 47 [ 3.922315] pci 0000:ff:13.5: Adding to iommu group 47 [ 3.927519] pci 0000:ff:16.0: Adding to iommu group 48 [ 3.932698] pci 0000:ff:16.1: Adding to iommu group 48 [ 3.937873] pci 0000:ff:16.2: Adding to iommu group 48 [ 3.946899] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 3.953347] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.959789] software IO TLB: mapped [mem 0x0000000079e2c000-0x000000007de2c000] (64MB) [ 3.968285] Initialise system trusted keyrings [ 3.972753] Key type blacklist registered [ 3.976848] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 3.985136] zbud: loaded [ 3.987998] integrity: Platform Keyring initialized [ 3.992891] integrity: Machine keyring initialized [ 3.997691] Key type asymmetric registered [ 4.001788] Asymmetric key parser 'x509' registered [ 4.035996] Freeing initrd memory: 40392K [ 4.047420] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 4.053209] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 4.060649] io scheduler mq-deadline registered [ 4.067615] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.074432] Monitor-Mwait will be used to enter C-1 state [ 4.074445] Monitor-Mwait will be used to enter C-2 state [ 4.074452] ACPI: \_SB_.SCK0.C000: Found 2 idle states [ 4.084561] ERST: Error Record Serialization Table (ERST) support is initialized. [ 4.092055] pstore: Registered erst as persistent store backend [ 4.098136] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.104575] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.112687] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.120907] Linux agpgart interface v0.103 [ 4.125146] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 4.134286] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 4.141165] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 4.150980] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.155952] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.161196] mousedev: PS/2 mouse device common for all mice [ 4.166810] rtc_cmos 00:02: RTC can wake from S4 [ 4.171705] rtc_cmos 00:02: registered as rtc0 [ 4.176192] rtc_cmos 00:02: setting system clock to 2024-09-27T21:33:06 UTC (1727472786) [ 4.184322] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.192151] intel_pstate: Intel P-state driver initializing [ 4.198053] ledtrig-cpu: registered to indicate activity on CPUs [ 4.222545] NET: Registered PF_INET6 protocol family [ 4.235772] Segment Routing with IPv6 [ 4.239466] In-situ OAM (IOAM) with IPv6 [ 4.243426] mip6: Mobile IPv6 [ 4.246401] NET: Registered PF_PACKET protocol family [ 4.251555] mpls_gso: MPLS GSO support [ 4.255820] microcode: sig=0x306e4, pf=0x8, revision=0x42e [ 4.261371] microcode: Microcode Update Driver: v2.2. [ 4.261379] IPI shorthand broadcast: enabled [ 4.270736] sched_clock: Marking stable (3281235050, 989467770)->(4638051806, -367348986) [ 4.279165] registered taskstats version 1 [ 4.283278] Loading compiled-in X.509 certificates [ 4.327717] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.336448] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 4.347113] zswap: loaded using pool lzo/zbud [ 4.351705] Key type .fscrypt registered [ 4.355631] Key type fscrypt-provisioning registered [ 4.360897] pstore: Using crash dump compression: deflate [ 4.374783] Key type encrypted registered [ 4.378822] AppArmor: AppArmor sha1 policy hashing enabled [ 4.384318] ima: No TPM chip found, activating TPM-bypass! [ 4.389800] ima: Allocated hash algorithm: sha256 [ 4.394519] ima: No architecture policies found [ 4.399059] evm: Initialising EVM extended attributes: [ 4.404193] evm: security.selinux [ 4.407513] evm: security.SMACK64 (disabled) [ 4.411785] evm: security.SMACK64EXEC (disabled) [ 4.416405] evm: security.SMACK64TRANSMUTE (disabled) [ 4.421457] evm: security.SMACK64MMAP (disabled) [ 4.426077] evm: security.apparmor [ 4.429482] evm: security.ima [ 4.432452] evm: security.capability [ 4.436026] evm: HMAC attrs: 0x1 [ 4.618276] clk: Disabling unused clocks [ 4.624037] Freeing unused decrypted memory: 2036K [ 4.629585] Freeing unused kernel image (initmem) memory: 2796K [ 4.635602] Write protecting the kernel read-only data: 26624k [ 4.642162] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 4.649130] Freeing unused kernel image (rodata/data gap) memory: 1168K [ 4.742442] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.748877] x86/mm: Checking user space page tables [ 4.829142] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.835580] Run /init as init process [ 4.839243] with arguments: [ 4.839245] /init [ 4.839246] with environment: [ 4.839247] HOME=/ [ 4.839248] TERM=linux [ 4.839250] BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 [ 4.989499] tsc: Refined TSC clocksource calibration: 1799.999 MHz [ 4.995696] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 5.005734] clocksource: Switched to clocksource tsc [ 5.043864] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 5.065280] SCSI subsystem initialized [ 5.066096] i2c i2c-0: 1/6 memory slots populated (from DMI) [ 5.074700] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 5.097092] ACPI: bus type USB registered [ 5.101172] usbcore: registered new interface driver usbfs [ 5.106677] usbcore: registered new interface driver hub [ 5.112237] e1000e: Intel(R) PRO/1000 Network Driver [ 5.117212] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 5.123466] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.132838] usbcore: registered new device driver usb [ 5.151858] libata version 3.00 loaded. [ 5.153414] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.158669] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.166081] ehci-pci 0000:00:1a.0: debug port 2 [ 5.174559] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 5.174636] ahci 0000:00:1f.2: version 3.0 [ 5.188551] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 5.196195] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 5.197495] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.204374] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 5.218201] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.226466] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.233684] usb usb1: Product: EHCI Host Controller [ 5.238564] usb usb1: Manufacturer: Linux 6.1.0-25-amd64 ehci_hcd [ 5.244659] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.245804] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a6 [ 5.249464] hub 1-0:1.0: USB hub found [ 5.257196] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 5.260949] hub 1-0:1.0: 2 ports detected [ 5.267894] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.272171] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.278818] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.283758] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.293510] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 5.293721] scsi host0: ahci [ 5.294199] scsi host1: ahci [ 5.294589] scsi host2: ahci [ 5.294822] scsi host3: ahci [ 5.295109] scsi host4: ahci [ 5.295418] scsi host5: ahci [ 5.295475] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 32 [ 5.295479] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 32 [ 5.295482] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 32 [ 5.295484] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 32 [ 5.295487] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 32 [ 5.295489] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 32 [ 5.305571] ehci-pci 0000:00:1d.0: debug port 2 [ 5.306904] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 5.313747] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 5.334119] isci 0000:04:00.0: OEM parameter table found in OROM [ 5.355666] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 5.362090] isci 0000:04:00.0: OEM SAS parameters (version: 1.0) loaded (platform) [ 5.362126] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.362562] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 5.365350] scsi host6: isci [ 5.424360] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.426852] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a7 [ 5.432639] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.440537] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 5.447757] usb usb2: Product: EHCI Host Controller [ 5.454716] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.459509] usb usb2: Manufacturer: Linux 6.1.0-25-amd64 ehci_hcd [ 5.459511] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.477180] hub 2-0:1.0: USB hub found [ 5.480949] hub 2-0:1.0: 2 ports detected [ 5.549539] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.607085] ata2: SATA link down (SStatus 0 SControl 300) [ 5.612505] ata5: SATA link down (SStatus 0 SControl 300) [ 5.617929] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.624143] ata6: SATA link down (SStatus 0 SControl 300) [ 5.629587] ata4: SATA link down (SStatus 0 SControl 300) [ 5.635060] ata3: SATA link down (SStatus 0 SControl 300) [ 5.640606] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 5.647794] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.655688] ata1.00: configured for UDMA/133 [ 5.660045] scsi: waiting for bus probes to complete ... [ 5.714258] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.722452] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.730348] hub 1-1:1.0: USB hub found [ 5.734289] hub 1-1:1.0: 6 ports detected [ 5.745526] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.789766] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 5.800194] e1000e 0000:06:00.0 enx002590eb25a7: renamed from eth1 [ 5.825718] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.833407] sd 0:0:0:0: [sda] Write Protect is off [ 5.837963] e1000e 0000:05:00.0 enx002590eb25a6: renamed from eth0 [ 5.838209] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.844420] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.853522] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 5.881423] sda: sda1 sda2 < sda5 > [ 5.885323] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.909951] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.918151] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.925707] hub 2-1:1.0: USB hub found [ 5.929521] hub 2-1:1.0: 8 ports detected [ 6.049502] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 6.167027] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 6.175422] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.182739] usb 1-1.1: Product: Hermon USB hidmouse Device [ 6.188230] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 6.197821] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.210064] device-mapper: uevent: version 1.0.3 [ 6.210824] hid: raw HID events driver (C) Jiri Kosina [ 6.214769] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 6.233771] usbcore: registered new interface driver usbhid [ 6.239350] usbhid: USB HID core driver [ 6.245869] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input3 [ 6.260719] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 6.275685] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input4 [ 6.437628] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 6.753695] PM: Image not found (code -22) [ 7.134678] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 7.146358] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 7.331566] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 8.902446] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 8.933555] ACPI: button: Power Button [PWRB] [ 8.938021] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 8.945476] ACPI: button: Power Button [PWRF] [ 9.004994] dca service started, version 1.12.1 [ 9.096394] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 9.159142] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 9.161569] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.173520] IPMI message handler: version 39.2 [ 9.180159] ipmi device interface [ 9.274811] iTCO_vendor_support: vendor-support=0 [ 9.280331] ipmi_si: IPMI System Interface driver [ 9.290025] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 9.296410] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 9.303660] ipmi_si: Adding SMBIOS-specified kcs state machine [ 9.309581] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 9.315654] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 9.323827] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 9.331771] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 9.337516] RAPL PMU: hw unit of domain package 2^-16 Joules [ 9.343176] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 9.350240] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 9.350262] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 9.389163] ACPI: bus type drm_connector registered [ 9.394806] cryptd: max_cpu_qlen set to 1000 [ 9.399437] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 9.408140] ipmi_si: Adding ACPI-specified kcs state machine [ 9.413874] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 9.495556] AVX version of gcm_enc/dec engaged. [ 9.500157] AES CTR mode by8 optimization enabled [ 9.635970] mgag200 0000:07:01.0: vgaarb: deactivate vga console [ 9.647045] Console: switching to colour dummy device 80x25 [ 9.658506] [drm] Initialized mgag200 1.0.0 20110418 for 0000:07:01.0 on minor 0 [ 9.668020] fbcon: mgag200drmfb (fb0) is primary device [ 9.685548] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 9.696947] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x0703, dev_id: 0x20) [ 9.730076] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 9.810372] ipmi_ssif: IPMI SSIF Interface driver [ 10.044287] Console: switching to colour frame buffer device 128x48 [ 10.153440] mgag200 0000:07:01.0: [drm] fb0: mgag200drmfb frame buffer device [ 10.391336] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.391363] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.391369] EDAC sbridge: Seeking for: PCI ID 8086:0e60 [ 10.391377] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.391386] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.391390] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.391398] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.391401] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.391410] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.391413] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.391421] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.391425] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.391433] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.391437] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.391445] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.391448] EDAC sbridge: Seeking for: PCI ID 8086:0e68 [ 10.391456] EDAC sbridge: Seeking for: PCI ID 8086:0e79 [ 10.391464] EDAC sbridge: Seeking for: PCI ID 8086:0e6a [ 10.391471] EDAC sbridge: Seeking for: PCI ID 8086:0e6b [ 10.391479] EDAC sbridge: Seeking for: PCI ID 8086:0e6c [ 10.391487] EDAC sbridge: Seeking for: PCI ID 8086:0e6d [ 10.391494] EDAC sbridge: Seeking for: PCI ID 8086:0eb8 [ 10.391502] EDAC sbridge: Seeking for: PCI ID 8086:0ebc [ 10.391509] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.391519] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.391521] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.391530] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.391533] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.391542] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.391685] EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT) [ 10.402743] EDAC sbridge: Ver: 1.1.2 [ 10.496060] intel_rapl_common: Found RAPL domain package [ 10.501391] intel_rapl_common: Found RAPL domain core [ 10.506450] intel_rapl_common: Found RAPL domain dram [ 11.698928] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 12.924581] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 12.940239] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 12.996671] Adding 1949692k swap on /dev/mapper/fiano1--vg-swap_1. Priority:-2 extents:1 across:1949692k FS [ 13.608737] audit: type=1400 audit(1727472796.212:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1067 comm="apparmor_parser" [ 13.625492] audit: type=1400 audit(1727472796.220:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1066 comm="apparmor_parser" [ 13.640523] audit: type=1400 audit(1727472796.224:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1067 comm="apparmor_parser" [ 13.664960] audit: type=1400 audit(1727472796.268:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1069 comm="apparmor_parser" [ 13.680257] audit: type=1400 audit(1727472796.272:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1069 comm="apparmor_parser" [ 13.695197] audit: type=1400 audit(1727472796.272:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1069 comm="apparmor_parser" [ 13.838720] audit: type=1400 audit(1727472796.444:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=1092 comm="apparmor_parser" [ 13.880126] audit: type=1400 audit(1727472796.484:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1068 comm="apparmor_parser" [ 13.898125] audit: type=1400 audit(1727472796.488:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1068 comm="apparmor_parser" [ 13.915577] audit: type=1400 audit(1727472796.488:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1068 comm="apparmor_parser" [ 17.050578] e1000e 0000:05:00.0 enx002590eb25a6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 17.060317] IPv6: ADDRCONF(NETDEV_CHANGE): enx002590eb25a6: link becomes ready