[ 0.000000] Linux version 6.11.0+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Sat Sep 28 01:48:04 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/rimava0--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000095fff] usable [ 0.000000] Xen: [mem 0x0000000000096000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020069fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SCM/H8SCM, BIOS 3.5 11/25/2013 [ 0.000000] DMI: Memory slots populated: 1/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000013] Xen PV: Detected 6 vCPUS [ 0.037802] tsc: Fast TSC calibration using PIT [ 0.037804] tsc: Detected 3101.083 MHz processor [ 0.037805] tsc: Detected 3101.140 MHz TSC [ 0.038020] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.038023] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.038030] last_pfn = 0xdfeb2 max_arch_pfn = 0x400000000 [ 0.038035] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.038037] MTRRs set to read-only [ 0.038041] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.062976] RAMDISK: [mem 0x04000000-0x05472fff] [ 0.063003] ACPI: Early table checksum verification disabled [ 0.064519] ACPI: RSDP 0x00000000000FA1D0 000024 (v02 ACPIAM) [ 0.064532] ACPI: XSDT 0x00000000DFEA0100 000084 (v01 SMCI 20131125 MSFT 00000097) [ 0.064576] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.064637] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20240827/tbfadt-560) [ 0.064648] ACPI: DSDT 0x00000000DFEA0600 005699 (v01 1BA11 1BA11000 00000000 INTL 20051117) [ 0.064658] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.064668] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.064678] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.064689] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.064700] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.064710] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.064720] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.064732] ACPI: SRAT 0x00000000DFEAA6F0 000108 (v02 AMD AGESA 00000001 AMD 00000001) [ 0.064743] ACPI: SSDT 0x00000000DFEAA800 001158 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.064754] ACPI: EINJ 0x00000000DFEAB960 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.064764] ACPI: BERT 0x00000000DFEABAF0 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.064775] ACPI: ERST 0x00000000DFEABB20 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.064785] ACPI: HEST 0x00000000DFEABD30 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.064790] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.064792] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c98] [ 0.064793] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.064794] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.064796] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.064797] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.064798] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.064799] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.064800] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.064801] ACPI: Reserving SRAT table memory at [mem 0xdfeaa6f0-0xdfeaa7f7] [ 0.064802] ACPI: Reserving SSDT table memory at [mem 0xdfeaa800-0xdfeab957] [ 0.064803] ACPI: Reserving EINJ table memory at [mem 0xdfeab960-0xdfeaba8f] [ 0.064804] ACPI: Reserving BERT table memory at [mem 0xdfeabaf0-0xdfeabb1f] [ 0.064805] ACPI: Reserving ERST table memory at [mem 0xdfeabb20-0xdfeabd2f] [ 0.064808] ACPI: Reserving HEST table memory at [mem 0xdfeabd30-0xdfeabdd7] [ 0.064944] APIC: Switched APIC routing to: Xen PV [ 0.067144] Zone ranges: [ 0.067146] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.067148] DMA32 [mem 0x0000000001000000-0x00000000dfeb1fff] [ 0.067151] Normal empty [ 0.067152] Movable zone start for each node [ 0.067153] Early memory node ranges [ 0.067154] node 0: [mem 0x0000000000001000-0x0000000000095fff] [ 0.067156] node 0: [mem 0x0000000000100000-0x0000000020069fff] [ 0.067158] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020069fff] [ 0.067172] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.067314] On node 0, zone DMA: 106 pages in unavailable ranges [ 0.073007] On node 0, zone DMA32: 32662 pages in unavailable ranges [ 0.073023] p2m virtual area at (____ptrval____), size is 40000000 [ 0.280418] Remapped 106 page(s) [ 0.280429] Remapped 0 non-RAM page(s) [ 0.280943] ACPI: PM-Timer IO Port: 0x808 [ 0.280985] CPU topo: CPU limit of 6 reached. Ignoring further CPUs [ 0.281021] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.281025] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.281052] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.281061] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.281074] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.281080] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.281106] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.281110] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.281126] CPU topo: Max. logical packages: 1 [ 0.281128] CPU topo: Max. logical dies: 1 [ 0.281128] CPU topo: Max. dies per package: 1 [ 0.281137] CPU topo: Max. threads per core: 1 [ 0.281139] CPU topo: Num. cores per package: 6 [ 0.281140] CPU topo: Num. threads per package: 6 [ 0.281141] CPU topo: Allowing 6 present CPUs plus 0 hotplug CPUs [ 0.281142] CPU topo: Rejected CPUs 2 [ 0.281162] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.281165] PM: hibernation: Registered nosave memory: [mem 0x00096000-0x000fffff] [ 0.281167] PM: hibernation: Registered nosave memory: [mem 0x2006a000-0xdfe9dfff] [ 0.281169] PM: hibernation: Registered nosave memory: [mem 0xdfe9e000-0xdfe9ffff] [ 0.281170] PM: hibernation: Registered nosave memory: [mem 0xdfea0000-0xdfeb1fff] [ 0.281172] [mem 0x2006a000-0xdfe9dfff] available for PCI devices [ 0.281179] Booting kernel on Xen [ 0.281180] Xen version: 4.20-unstable (preserve-AD) [ 0.281186] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.287598] setup_percpu: NR_CPUS:64 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1 [ 0.288939] percpu: Embedded 57 pages/cpu s194520 r8192 d30760 u262144 [ 0.288949] pcpu-alloc: s194520 r8192 d30760 u262144 alloc=1*2097152 [ 0.288956] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.289066] xen: PV spinlocks enabled [ 0.289070] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.289073] Kernel command line: placeholder root=/dev/mapper/rimava0--vg-root ro console=hvc0 [ 0.289174] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.289243] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.289372] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.289634] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.289639] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.289643] software IO TLB: area num 8. [ 0.429291] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.432475] Dynamic Preempt: voluntary [ 0.432622] rcu: Preemptible hierarchical RCU implementation. [ 0.432624] rcu: RCU event tracing is enabled. [ 0.432625] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.432628] Trampoline variant of Tasks RCU enabled. [ 0.432629] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.432631] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.432661] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=6. [ 0.439522] NR_IRQS: 4352, nr_irqs: 1016, preallocated irqs: 16 [ 0.439709] xen:events: Using FIFO-based ABI [ 0.439746] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.439753] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.439766] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.439771] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.439776] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.439781] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.439786] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.439791] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.439795] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.439800] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.439807] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.439812] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.439817] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.439822] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.439827] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.439844] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.445931] Console: colour VGA+ 80x25 [ 0.445938] printk: legacy console [tty0] enabled [ 0.459855] printk: legacy console [hvc0] enabled [ 0.460527] ACPI: Core revision 20240827 [ 0.466381] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.466537] Xen: using vcpuop timer interface [ 0.466544] installing Xen timer for CPU 0 [ 0.466798] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cb37c9ab67, max_idle_ns: 440795327489 ns [ 0.466970] Calibrating delay loop (skipped), value calculated using timer frequency.. 6202.28 BogoMIPS (lpj=3101140) [ 0.467165] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.467381] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.467490] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.467607] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.467983] Spectre V2 : Mitigation: Retpolines [ 0.468085] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.468228] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.468338] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.468450] RETBleed: Mitigation: untrained return thunk [ 0.468572] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.468716] Speculative Store Bypass: Vulnerable [ 0.468850] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.468972] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.469082] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.469192] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.469302] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.497868] Freeing SMP alternatives memory: 40K [ 0.497978] pid_max: default: 32768 minimum: 301 [ 0.498141] LSM: initializing lsm=capability,selinux [ 0.498293] SELinux: Initializing. [ 0.498636] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.498783] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.500114] cpu 0 spinlock event irq 57 [ 0.500229] VPMU disabled by hypervisor. [ 0.500798] Performance Events: PMU not available due to virtualization, using software events only. [ 0.500960] signal: max sigframe size: 1776 [ 0.501999] rcu: Hierarchical SRCU implementation. [ 0.502109] rcu: Max phase no-delay instances is 400. [ 0.502348] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.512980] smp: Bringing up secondary CPUs ... [ 0.515991] installing Xen timer for CPU 1 [ 0.516517] installing Xen timer for CPU 2 [ 0.516890] installing Xen timer for CPU 3 [ 0.518035] installing Xen timer for CPU 4 [ 0.518443] installing Xen timer for CPU 5 [ 0.028116] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0011 [ 0.518663] cpu 1 spinlock event irq 87 [ 0.028116] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0012 [ 0.519054] cpu 2 spinlock event irq 88 [ 0.028116] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0013 [ 0.520241] cpu 3 spinlock event irq 89 [ 0.028116] [Firmware Bug]: CPU 4: APIC ID mismatch. CPUID: 0x0004 APIC: 0x0014 [ 0.521023] cpu 4 spinlock event irq 90 [ 0.028116] [Firmware Bug]: CPU 5: APIC ID mismatch. CPUID: 0x0005 APIC: 0x0015 [ 0.522985] cpu 5 spinlock event irq 91 [ 0.524402] smp: Brought up 1 node, 6 CPUs [ 0.524625] Memory: 379856K/524284K available (16384K kernel code, 2785K rwdata, 6296K rodata, 2732K init, 1708K bss, 138752K reserved, 0K cma-reserved) [ 0.525317] devtmpfs: initialized [ 0.525993] x86/mm: Memory block size: 128MB [ 0.526744] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.527052] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.527211] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.527495] PM: RTC time: 03:13:37, date: 2024-09-28 [ 0.527890] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.528016] xen:grant_table: Grant tables using version 1 layout [ 0.528186] Grant table initialized [ 0.528628] audit: initializing netlink subsys (disabled) [ 0.528797] audit: type=2000 audit(1727493217.346:1): state=initialized audit_enabled=0 res=1 [ 0.529036] thermal_sys: Registered thermal governor 'step_wise' [ 0.529039] thermal_sys: Registered thermal governor 'user_space' [ 0.530012] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.530285] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.608193] PCI: Using configuration type 1 for base access [ 0.608403] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.609094] ACPI: Added _OSI(Module Device) [ 0.609196] ACPI: Added _OSI(Processor Device) [ 0.609974] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.610078] ACPI: Added _OSI(Processor Aggregator Device) [ 0.617399] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.618011] xen: registering gsi 9 triggering 0 polarity 1 [ 0.619386] ACPI: Interpreter enabled [ 0.619662] ACPI: PM: (supports S0 S1 S4 S5) [ 0.620014] ACPI: Using IOAPIC for interrupt routing [ 0.620637] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.620998] PCI: Using E820 reservations for host bridge windows [ 0.622861] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.672912] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.672980] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.673134] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.673245] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.673389] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.673889] PCI host bridge to bus 0000:00 [ 0.673973] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.674090] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.674202] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.674343] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.674484] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.674626] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.674791] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.675389] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.675882] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.676041] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.676391] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.676786] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.677398] pci 0000:00:09.0: enabling Extended Tags [ 0.678810] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.681509] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.682486] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.682941] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.683351] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.684089] pci 0000:00:0a.0: enabling Extended Tags [ 0.685347] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.687333] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 conventional PCI endpoint [ 0.688033] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.688535] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.689034] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.689535] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.690054] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.690542] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.692728] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.693275] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.695606] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.696250] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.698751] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.699269] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.701058] pci 0000:00:12.2: supports D1 D2 [ 0.701200] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.701625] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.701815] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.702200] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.702386] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.702781] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.702966] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.703299] pci 0000:00:13.2: supports D1 D2 [ 0.703403] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.703687] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.704205] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.704391] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.704518] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.704646] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.704772] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.704899] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.705023] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.705139] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.705248] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.705360] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.705667] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.706171] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.706400] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.706528] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.706649] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.706970] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.707168] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.707567] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.707948] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.708172] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.708481] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.708828] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.709189] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.709694] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.709886] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.710024] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.710154] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.710515] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.713041] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.713646] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.714286] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.717308] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.717817] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.719322] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.721326] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.722143] pci_bus 0000:03: extended config space not accessible [ 0.722869] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.723281] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.723795] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.724138] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.725261] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.728272] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.728759] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.729000] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.729413] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.729830] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.730009] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.730885] pci_bus 0000:00: on NUMA node 0 [ 0.734002] xen: registering gsi 13 triggering 1 polarity 0 [ 0.736643] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.737381] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.738139] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.738897] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.739365] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.740142] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.740868] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.742383] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.743727] xen:balloon: Initialising balloon driver [ 0.745053] iommu: Default domain type: Translated [ 0.745412] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.746359] SCSI subsystem initialized [ 0.747072] libata version 3.00 loaded. [ 0.747095] ACPI: bus type USB registered [ 0.747231] usbcore: registered new interface driver usbfs [ 0.747349] usbcore: registered new interface driver hub [ 0.747502] usbcore: registered new device driver usb [ 0.747636] pps_core: LinuxPPS API ver. 1 registered [ 0.747742] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.747975] PTP clock support registered [ 0.749096] Advanced Linux Sound Architecture Driver Initialized. [ 0.751921] NetLabel: Initializing [ 0.752000] NetLabel: domain hash size = 128 [ 0.752351] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.752919] NetLabel: unlabeled traffic allowed by default [ 0.754219] PCI: Using ACPI for IRQ routing [ 0.812966] PCI: pci_cache_line_size set to 64 bytes [ 0.812966] e820: reserve RAM buffer [mem 0x00096000-0x0009ffff] [ 0.812966] e820: reserve RAM buffer [mem 0x2006a000-0x23ffffff] [ 0.814166] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.814166] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.814265] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.814265] vgaarb: loaded [ 0.814972] clocksource: Switched to clocksource tsc-early [ 0.815108] VFS: Disk quotas dquot_6.6.0 [ 0.815474] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.815698] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.815861] pnp: PnP ACPI init [ 0.816332] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.816589] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.817117] xen: registering gsi 8 triggering 1 polarity 0 [ 0.817375] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.817712] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.817828] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.818360] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.818473] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.818623] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.818732] system 00:05: [io 0x040b] has been reserved [ 0.818838] system 00:05: [io 0x04d6] has been reserved [ 0.818944] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.819068] system 00:05: [io 0x0c14] has been reserved [ 0.819176] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.819285] system 00:05: [io 0x0c52] has been reserved [ 0.819392] system 00:05: [io 0x0c6c] has been reserved [ 0.819499] system 00:05: [io 0x0c6f] has been reserved [ 0.819605] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.819714] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.819823] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.819982] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.820095] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.820204] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.820313] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.820421] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.820530] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.820638] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.820748] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.820858] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.820982] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.821100] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.821495] xen: registering gsi 4 triggering 1 polarity 0 [ 0.821499] Already setup the GSI :4 [ 0.821600] pnp 00:06: [dma 0 disabled] [ 0.821933] xen: registering gsi 3 triggering 1 polarity 0 [ 0.821940] pnp 00:07: [dma 0 disabled] [ 0.822125] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.822549] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.822739] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.822853] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.822965] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.823093] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.823381] pnp: PnP ACPI: found 10 devices [ 0.845766] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.845991] NET: Registered PF_INET protocol family [ 0.846283] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.846770] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.846922] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.847113] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.847281] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.847495] TCP: Hash tables configured (established 4096 bind 4096) [ 0.847740] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.847859] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.848103] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.848872] RPC: Registered named UNIX socket transport module. [ 0.849065] RPC: Registered udp transport module. [ 0.849401] RPC: Registered tcp transport module. [ 0.850015] RPC: Registered tcp-with-tls transport module. [ 0.850148] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.850949] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.851122] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.851245] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.851375] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.851484] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.851602] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.851733] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.851872] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.852043] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.852673] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.853070] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.853190] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.853301] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.853411] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.853524] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.853631] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.853742] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.853849] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.853964] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.854126] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.854241] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.854351] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.854461] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.854581] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.854691] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.855086] xen: registering gsi 16 triggering 0 polarity 1 [ 0.855159] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.504322] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 634177 usecs [ 1.504580] xen: registering gsi 16 triggering 0 polarity 1 [ 1.504595] Already setup the GSI :16 [ 1.528321] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 23240 usecs [ 1.528600] xen: registering gsi 17 triggering 0 polarity 1 [ 1.528689] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.528879] xen: registering gsi 18 triggering 0 polarity 1 [ 1.528898] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.551762] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 22390 usecs [ 1.552192] xen: registering gsi 18 triggering 0 polarity 1 [ 1.552205] Already setup the GSI :18 [ 1.575861] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 23149 usecs [ 1.576255] xen: registering gsi 19 triggering 0 polarity 1 [ 1.576314] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.576522] xen: registering gsi 18 triggering 0 polarity 1 [ 1.576527] Already setup the GSI :18 [ 1.600292] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 23264 usecs [ 1.600576] PCI: CLS 64 bytes, default 64 [ 1.600742] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.600856] software IO TLB: mapped [mem 0x000000001b200000-0x000000001f200000] (64MB) [ 1.600899] Unpacking initramfs... [ 1.601107] kvm_intel: VMX not supported by CPU 3 [ 1.601447] kvm_amd: SVM not supported by CPU 3 [ 1.601554] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cb37c9ab67, max_idle_ns: 440795327489 ns [ 1.601868] clocksource: Switched to clocksource tsc [ 1.610161] Initialise system trusted keyrings [ 1.611451] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.613135] NFS: Registering the id_resolver key type [ 1.613266] Key type id_resolver registered [ 1.613369] Key type id_legacy registered [ 1.613613] 9p: Installing v9fs 9p2000 file system support [ 1.644079] Key type asymmetric registered [ 1.644681] Asymmetric key parser 'x509' registered [ 1.645408] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.645966] io scheduler mq-deadline registered [ 1.647967] io scheduler kyber registered [ 1.649512] xen: registering gsi 53 triggering 0 polarity 1 [ 1.649565] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.649889] xen: registering gsi 54 triggering 0 polarity 1 [ 1.649909] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.650387] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.650590] ACPI: button: Power Button [PWRB] [ 1.650739] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.651186] ACPI: button: Power Button [PWRF] [ 1.659635] xen:xen_evtchn: Event-channel device installed [ 1.661097] xen_pciback: backend is vpci [ 1.665051] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.667751] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.673380] hpet_acpi_add: no address or irqs in _CRS [ 1.674246] Non-volatile memory driver v1.3 [ 1.696393] loop: module loaded [ 1.737790] ahci 0000:00:11.0: version 3.0 [ 1.738606] xen: registering gsi 22 triggering 0 polarity 1 [ 1.738890] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.739433] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.739948] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.740447] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.749336] scsi host0: ahci [ 1.750751] scsi host1: ahci [ 1.751795] scsi host2: ahci [ 1.752929] scsi host3: ahci [ 1.753094] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 4 [ 1.753257] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 4 [ 1.753404] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 4 [ 1.753550] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 4 [ 1.754315] tun: Universal TUN/TAP device driver, 1.6 [ 1.754682] e100: Intel(R) PRO/100 Network Driver [ 1.754795] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.754918] sky2: driver version 1.30 [ 1.755079] xen_netfront: Initialising Xen virtual ethernet driver [ 1.757019] xen: registering gsi 17 triggering 0 polarity 1 [ 1.757044] xen: registering gsi 19 triggering 0 polarity 1 [ 1.757048] xen: registering gsi 16 triggering 0 polarity 1 [ 1.757060] Already setup the GSI :16 [ 1.757060] Already setup the GSI :19 [ 1.757066] Already setup the GSI :17 [ 1.757234] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.757370] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 1 [ 1.757995] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.758190] ehci-pci 0000:00:13.2: debug port 1 [ 1.758435] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 1.764309] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.764570] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 1.764717] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.764859] usb usb1: Product: EHCI Host Controller [ 1.764967] usb usb1: Manufacturer: Linux 6.11.0+ ehci_hcd [ 1.765100] usb usb1: SerialNumber: 0000:00:13.2 [ 1.765552] hub 1-0:1.0: USB hub found [ 1.765667] hub 1-0:1.0: 6 ports detected [ 1.766082] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.766455] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 2 [ 1.766719] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.821344] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.821542] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.821722] usb usb2: Product: OHCI PCI host controller [ 1.821828] usb usb2: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.821934] usb usb2: SerialNumber: 0000:00:12.0 [ 1.822404] hub 2-0:1.0: USB hub found [ 1.822519] hub 2-0:1.0: 3 ports detected [ 1.823077] xen: registering gsi 16 triggering 0 polarity 1 [ 1.823088] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.823096] Already setup the GSI :16 [ 1.823274] Freeing initrd memory: 20940K [ 1.823595] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3 [ 1.823944] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.824144] ehci-pci 0000:00:12.2: debug port 1 [ 1.824386] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.830159] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.830399] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 1.830545] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.830684] usb usb3: Product: EHCI Host Controller [ 1.830788] usb usb3: Manufacturer: Linux 6.11.0+ ehci_hcd [ 1.830894] usb usb3: SerialNumber: 0000:00:12.2 [ 1.831464] hub 3-0:1.0: USB hub found [ 1.831597] hub 3-0:1.0: 6 ports detected [ 1.880368] hub 2-0:1.0: USB hub found [ 1.880517] hub 2-0:1.0: 3 ports detected [ 1.880979] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.881508] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.882379] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 1.937961] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.938499] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.938920] usb usb4: Product: OHCI PCI host controller [ 1.939339] usb usb4: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.939671] usb usb4: SerialNumber: 0000:00:12.1 [ 1.941269] hub 4-0:1.0: USB hub found [ 1.941715] hub 4-0:1.0: 3 ports detected [ 1.943995] xen: registering gsi 18 triggering 0 polarity 1 [ 1.944033] Already setup the GSI :18 [ 1.944717] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.945621] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.946592] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 2.001844] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 2.002401] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.002800] usb usb5: Product: OHCI PCI host controller [ 2.003224] usb usb5: Manufacturer: Linux 6.11.0+ ohci_hcd [ 2.003581] usb usb5: SerialNumber: 0000:00:13.0 [ 2.005032] hub 5-0:1.0: USB hub found [ 2.005587] hub 5-0:1.0: 3 ports detected [ 2.008334] xen: registering gsi 18 triggering 0 polarity 1 [ 2.008375] Already setup the GSI :18 [ 2.009022] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 2.009990] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 2.010708] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 2.065224] ata3: SATA link down (SStatus 0 SControl 300) [ 2.065698] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 2.065855] ata4: SATA link down (SStatus 0 SControl 300) [ 2.066293] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.066764] usb usb6: Product: OHCI PCI host controller [ 2.067392] usb usb6: Manufacturer: Linux 6.11.0+ ohci_hcd [ 2.067752] usb usb6: SerialNumber: 0000:00:13.1 [ 2.069315] hub 6-0:1.0: USB hub found [ 2.069779] hub 6-0:1.0: 3 ports detected [ 2.072474] xen: registering gsi 18 triggering 0 polarity 1 [ 2.072511] Already setup the GSI :18 [ 2.073099] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.074050] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.074751] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 2.130872] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 2.131375] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.131772] usb usb7: Product: OHCI PCI host controller [ 2.132094] usb usb7: Manufacturer: Linux 6.11.0+ ohci_hcd [ 2.132503] usb usb7: SerialNumber: 0000:00:14.5 [ 2.133973] hub 7-0:1.0: USB hub found [ 2.134561] hub 7-0:1.0: 2 ports detected [ 2.136839] usbcore: registered new interface driver usblp [ 2.137420] usbcore: registered new interface driver usb-storage [ 2.138550] i8042: PNP: No PS/2 controller found. [ 2.138668] i8042: Probing ports directly. [ 2.142358] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.142807] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.144959] rtc_cmos 00:02: RTC can wake from S4 [ 2.147911] rtc_cmos 00:02: registered as rtc0 [ 2.148634] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 2.149420] device-mapper: uevent: version 1.0.3 [ 2.150238] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 2.150716] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 2.151326] hid: raw HID events driver (C) Jiri Kosina [ 2.153535] usbcore: registered new interface driver usbhid [ 2.153961] usbhid: USB HID core driver [ 2.157039] Initializing XFRM netlink socket [ 2.157621] NET: Registered PF_INET6 protocol family [ 2.159844] Segment Routing with IPv6 [ 2.160385] In-situ OAM (IOAM) with IPv6 [ 2.160940] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.162286] NET: Registered PF_PACKET protocol family [ 2.162788] 9pnet: Installing 9P2000 support [ 2.163384] Key type dns_resolver registered [ 2.163821] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 2.166289] IPI shorthand broadcast: enabled [ 2.209605] sched_clock: Marking stable (2182045410, 27116607)->(2223017888, -13855871) [ 2.212609] registered taskstats version 1 [ 2.212988] Loading compiled-in X.509 certificates [ 2.218305] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.218517] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.220694] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 2.221131] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.221758] ata2.00: ATAPI: ATAPI iHAS124 E, 4L07, max UDMA/100 [ 2.222650] ata2.00: configured for UDMA/100 [ 2.223016] ata1.00: configured for UDMA/133 [ 2.224394] PM: Magic number: 8:606:210 [ 2.224663] printk: legacy console [netcon0] enabled [ 2.224771] netconsole: network logging started [ 2.225197] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.233951] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.234652] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.234730] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.234831] sd 0:0:0:0: [sda] Write Protect is off [ 2.235063] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.235088] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.235310] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.239506] scsi 1:0:0:0: CD-ROM ATAPI iHAS124 E 4L07 PQ: 0 ANSI: 5 [ 2.253394] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.253819] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 2.254021] ALSA device list: [ 2.254147] No soundcards found. [ 2.255027] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 2.257902] sda: sda1 sda2 < sda5 > [ 2.259603] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.284221] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.284417] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.297663] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.297810] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.301130] Freeing unused kernel image (initmem) memory: 2732K [ 2.301346] Write protecting the kernel read-only data: 24576k [ 2.311412] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.348582] Freeing unused kernel image (rodata/data gap) memory: 1896K [ 2.459583] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.459748] Run /init as init process [ 2.459851] with arguments: [ 2.459853] /init [ 2.459855] placeholder [ 2.459857] with environment: [ 2.459858] HOME=/ [ 2.459859] TERM=linux [ 2.470257] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.470439] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.470567] usb 6-2: Product: Hermon USB hidmouse Device [ 2.470675] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.476769] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.477206] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.480793] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.605502] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.746108] e1000e: Intel(R) PRO/1000 Network Driver [ 2.746251] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.746506] xen: registering gsi 48 triggering 0 polarity 1 [ 2.746578] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.746869] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.790994] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.833898] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0a:49:2e [ 2.834049] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.834249] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 2.834450] xen: registering gsi 47 triggering 0 polarity 1 [ 2.834475] xen: --> pirq=47 -> irq=47 (gsi=47) [ 2.834657] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.880223] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.926167] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0a:49:2f [ 2.926316] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.926504] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 2.928488] e1000e 0000:01:00.0 enx0cc47a0a492e: renamed from eth0 [ 2.928852] e1000e 0000:02:00.0 enx0cc47a0a492f: renamed from eth1 [ 3.091158] random: crng init done [ 3.642933] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.651420] EXT4-fs (dm-0): mounted filesystem 1ba94833-a100-4b82-85a7-7beffce06617 ro with ordered data mode. Quota mode: none. [ 7.493562] EXT4-fs (dm-0): re-mounted 1ba94833-a100-4b82-85a7-7beffce06617 r/w. Quota mode: none. [ 8.744136] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 8.764158] EXT4-fs (sda1): mounted filesystem 6b8e2b5e-1fb1-4c01-9098-b418ca944e60 r/w with ordered data mode. Quota mode: none. [ 8.832398] Adding 1949692k swap on /dev/mapper/rimava0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 10.340590] xenbr0: port 1(enx0cc47a0a492e) entered blocking state [ 10.340729] xenbr0: port 1(enx0cc47a0a492e) entered disabled state [ 10.340860] e1000e 0000:01:00.0 enx0cc47a0a492e: entered allmulticast mode [ 10.341012] e1000e 0000:01:00.0 enx0cc47a0a492e: entered promiscuous mode [ 13.400192] e1000e 0000:01:00.0 enx0cc47a0a492e: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 13.400653] xenbr0: port 1(enx0cc47a0a492e) entered blocking state [ 13.400778] xenbr0: port 1(enx0cc47a0a492e) entered forwarding state