[ 0.000000] Linux version 6.1.111+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Fri Sep 27 19:52:54 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000458] tsc: Detected 2199.998 MHz processor [ 0.000895] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000899] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000906] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000907] Disabled [ 0.000908] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000912] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000951] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027677] RAMDISK: [mem 0x04000000-0x05424fff] [ 0.027685] ACPI: Early table checksum verification disabled [ 0.028284] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028295] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028332] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028380] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028397] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028413] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028429] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028445] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028461] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028477] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028493] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028509] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028525] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028541] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028557] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028573] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028593] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028609] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028625] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028641] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028657] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028673] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028681] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028683] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028684] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028685] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028686] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028687] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028688] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028689] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028690] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028691] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028692] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028693] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028694] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028695] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028696] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028697] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028698] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028699] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028700] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028701] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028746] Setting APIC routing to Xen PV. [ 0.032696] Zone ranges: [ 0.032697] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032700] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032701] Normal empty [ 0.032703] Movable zone start for each node [ 0.032703] Early memory node ranges [ 0.032704] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032706] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032707] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032712] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032747] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034305] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034309] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221798] Remapped 102 page(s) [ 0.223172] ACPI: PM-Timer IO Port: 0x408 [ 0.223225] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223228] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223229] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223231] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223232] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223234] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223235] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223236] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223265] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223278] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223281] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223306] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223311] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223380] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223395] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223397] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223399] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223401] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223405] Booting kernel on Xen [ 0.223406] Xen version: 4.20-unstable (preserve-AD) [ 0.223409] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229666] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.229950] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.229956] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.229960] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230038] xen: PV spinlocks enabled [ 0.230041] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230046] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230049] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230085] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230095] random: crng init done [ 0.230144] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230169] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231482] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231485] software IO TLB: area num 8. [ 0.290812] Memory: 389288K/524284K available (14349K kernel code, 2686K rwdata, 4584K rodata, 1580K init, 1288K bss, 134744K reserved, 0K cma-reserved) [ 0.290982] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.293461] Dynamic Preempt: voluntary [ 0.293560] rcu: Preemptible hierarchical RCU implementation. [ 0.293561] rcu: RCU event tracing is enabled. [ 0.293562] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.293564] Trampoline variant of Tasks RCU enabled. [ 0.293564] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.293565] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.304049] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.304172] xen:events: Using FIFO-based ABI [ 0.304196] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.304204] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.304212] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.304219] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.304227] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.304234] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.304242] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.304249] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.304256] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.304264] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.304271] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.304279] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.304287] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.304295] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.304303] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.304313] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.309676] Console: colour VGA+ 80x25 [ 0.324454] printk: console [tty0] enabled [ 0.325778] printk: console [hvc0] enabled [ 0.325918] ACPI: Core revision 20220331 [ 0.341405] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.341572] Xen: using vcpuop timer interface [ 0.341581] installing Xen timer for CPU 0 [ 0.341733] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.341892] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199998) [ 0.342221] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.342338] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.342466] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.342615] Spectre V2 : Mitigation: Retpolines [ 0.342898] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.343058] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.343178] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.343299] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.343447] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.343565] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.343718] MDS: Mitigation: Clear CPU buffers [ 0.343831] TAA: Mitigation: Clear CPU buffers [ 0.343896] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.344062] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.344208] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.344360] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.344479] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.344598] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.362262] Freeing SMP alternatives memory: 40K [ 0.362389] pid_max: default: 32768 minimum: 301 [ 0.362913] LSM: Security Framework initializing [ 0.363036] SELinux: Initializing. [ 0.363175] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363329] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363984] cpu 0 spinlock event irq 25 [ 0.364104] VPMU disabled by hypervisor. [ 0.364543] cblist_init_generic: Setting adjustable number of callback queues. [ 0.364690] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.364847] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.364897] signal: max sigframe size: 1776 [ 0.365062] rcu: Hierarchical SRCU implementation. [ 0.365184] rcu: Max phase no-delay instances is 400. [ 0.365670] smp: Bringing up secondary CPUs ... [ 0.366009] installing Xen timer for CPU 1 [ 0.366481] cpu 1 spinlock event irq 35 [ 0.367032] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.367201] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.367390] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.368117] installing Xen timer for CPU 2 [ 0.368585] cpu 2 spinlock event irq 41 [ 0.369021] installing Xen timer for CPU 3 [ 0.369454] cpu 3 spinlock event irq 47 [ 0.369454] installing Xen timer for CPU 4 [ 0.370232] cpu 4 spinlock event irq 53 [ 0.370232] installing Xen timer for CPU 5 [ 0.371062] cpu 5 spinlock event irq 59 [ 0.371100] installing Xen timer for CPU 6 [ 0.371946] cpu 6 spinlock event irq 65 [ 0.372150] installing Xen timer for CPU 7 [ 0.372579] cpu 7 spinlock event irq 71 [ 0.373120] smp: Brought up 1 node, 8 CPUs [ 0.373238] smpboot: Max logical packages: 1 [ 0.373457] devtmpfs: initialized [ 0.373457] x86/mm: Memory block size: 128MB [ 0.374129] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.374163] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.374319] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.374896] PM: RTC time: 04:21:44, date: 2024-09-28 [ 0.375154] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.375301] xen:grant_table: Grant tables using version 1 layout [ 0.375438] Grant table initialized [ 0.375743] audit: initializing netlink subsys (disabled) [ 0.375916] audit: type=2000 audit(1727497304.771:1): state=initialized audit_enabled=0 res=1 [ 0.375964] thermal_sys: Registered thermal governor 'step_wise' [ 0.375964] thermal_sys: Registered thermal governor 'user_space' [ 0.376092] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.376517] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.376899] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.503585] PCI: Using configuration type 1 for base access [ 0.506218] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.506946] ACPI: Added _OSI(Module Device) [ 0.506946] ACPI: Added _OSI(Processor Device) [ 0.507011] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.507125] ACPI: Added _OSI(Processor Aggregator Device) [ 0.537196] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.539192] xen: registering gsi 9 triggering 0 polarity 0 [ 0.541764] ACPI: Dynamic OEM Table Load: [ 0.549019] ACPI: Interpreter enabled [ 0.549154] ACPI: PM: (supports S0 S4 S5) [ 0.549308] ACPI: Using IOAPIC for interrupt routing [ 0.549461] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.549612] PCI: Using E820 reservations for host bridge windows [ 0.550412] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.584859] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.584900] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.585171] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.585603] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.585724] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.585906] PCI host bridge to bus 0000:ff [ 0.586019] pci_bus 0000:ff: root bus resource [bus ff] [ 0.586213] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.586668] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.587096] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.587518] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.587962] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.588569] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.588995] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.589609] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.590058] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.590493] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.590918] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.591350] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.591776] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.592199] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.592634] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.593056] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.593691] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.594119] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.594373] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.594832] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.595249] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.595716] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.596380] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.596847] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.597451] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.597910] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.598335] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.598767] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.599232] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.599698] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.600165] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.600623] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.601252] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.601683] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.602108] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.602539] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.603009] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.603475] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.604153] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.604699] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.605326] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.605750] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.606179] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.606427] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.606864] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.607204] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.607629] pci_bus 0000:ff: on NUMA node 0 [ 0.612177] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.612312] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.612589] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.612589] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.612589] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.612719] PCI host bridge to bus 0000:00 [ 0.612834] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.612890] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.612890] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.612890] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.612890] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.612890] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.614186] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.614707] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.615077] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.615597] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.616169] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.616686] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.617044] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.617560] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.617934] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.618466] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.619036] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.619561] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.620137] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.620713] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.621342] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.622010] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.622234] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.622696] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.623042] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.623260] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.623920] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.624228] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.624447] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.624911] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.625270] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.625467] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.626000] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.626350] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.627092] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.627293] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.627414] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.636078] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.636633] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.636829] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.636904] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.637195] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.637752] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.637948] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.638070] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.638355] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.638910] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.639104] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.639230] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.639752] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.639949] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.640492] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.640815] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.641529] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.641723] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.641881] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.641937] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.642094] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.642252] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.642606] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.642924] pci 0000:00:1f.2: PME# supported from D3hot [ 0.643209] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.643622] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.643867] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.644167] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.644385] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.645100] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.645393] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.645725] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.645935] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.646684] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.646935] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.647848] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.647988] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.648700] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.648919] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.649617] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.649751] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.650285] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.650498] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.650783] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.650935] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.651489] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.651711] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.651833] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.651946] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.652073] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.652646] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.652859] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.653036] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.653220] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.653574] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.653776] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.653895] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.654099] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.654220] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.654775] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.655030] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.655168] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.655461] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.655752] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.656118] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.656238] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.656444] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.656661] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.656826] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.657321] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.657972] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.658099] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.658227] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.658586] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.658890] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.659100] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.659317] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.659482] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.660012] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.660485] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.660611] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.660739] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.660739] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.660739] pci 0000:09:00.0: enabling Extended Tags [ 0.660812] pci 0000:09:00.0: supports D1 D2 [ 0.660890] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.660890] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.660890] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.660890] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.662033] pci_bus 0000:0a: extended config space not accessible [ 0.662206] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.662411] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.662578] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.662746] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.663101] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.663984] pci 0000:0a:00.0: supports D1 D2 [ 0.664101] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.664558] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.664697] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.664827] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.665189] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.665392] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.665602] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.665763] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.666280] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.666524] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.666670] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.666888] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.667032] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.667598] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.667799] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.667985] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.668147] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.668656] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.668885] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.669028] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.669254] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.669399] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.669917] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.670118] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.670327] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.670488] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.671004] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.671232] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.671377] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.671595] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.671739] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.672271] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.672472] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.672680] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.672841] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.673293] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.673521] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.673666] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.673883] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.674028] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.674612] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.674766] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.674895] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.675035] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.675503] pci_bus 0000:00: on NUMA node 0 [ 0.675598] xen: registering gsi 13 triggering 1 polarity 0 [ 0.676568] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.676762] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.676957] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.677146] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.677335] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.677486] ACPI: PCI: Interrupt link LNKE disabled [ 0.677669] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.677787] ACPI: PCI: Interrupt link LNKF disabled [ 0.677966] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.678085] ACPI: PCI: Interrupt link LNKG disabled [ 0.678268] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.678386] ACPI: PCI: Interrupt link LNKH disabled [ 0.678651] xen:balloon: Initialising balloon driver [ 0.678986] iommu: Default domain type: Translated [ 0.686897] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.687084] SCSI subsystem initialized [ 0.687211] libata version 3.00 loaded. [ 0.687211] ACPI: bus type USB registered [ 0.687211] usbcore: registered new interface driver usbfs [ 0.687211] usbcore: registered new interface driver hub [ 0.687304] usbcore: registered new device driver usb [ 0.687430] pps_core: LinuxPPS API ver. 1 registered [ 0.687895] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.688047] PTP clock support registered [ 0.688182] Advanced Linux Sound Architecture Driver Initialized. [ 0.688192] NetLabel: Initializing [ 0.688304] NetLabel: domain hash size = 128 [ 0.688417] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.688913] NetLabel: unlabeled traffic allowed by default [ 0.689052] PCI: Using ACPI for IRQ routing [ 0.723366] PCI: pci_cache_line_size set to 64 bytes [ 0.724143] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.724145] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.724933] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.725054] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.725172] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.725321] vgaarb: loaded [ 0.726895] clocksource: Switched to clocksource tsc-early [ 0.726932] VFS: Disk quotas dquot_6.6.0 [ 0.727265] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.727410] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.727568] pnp: PnP ACPI init [ 0.728053] xen: registering gsi 8 triggering 1 polarity 0 [ 0.728247] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.728373] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.728492] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.728611] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.728729] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.728847] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.728985] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.729107] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.729227] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.729347] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.729467] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.729620] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.729740] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.730167] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.730292] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.730410] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.730528] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.730646] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.731092] xen: registering gsi 4 triggering 1 polarity 0 [ 0.731098] Already setup the GSI :4 [ 0.731211] pnp 00:03: [dma 0 disabled] [ 0.731522] xen: registering gsi 3 triggering 1 polarity 0 [ 0.731534] pnp 00:04: [dma 0 disabled] [ 0.732147] pnp: PnP ACPI: found 5 devices [ 0.763368] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.763531] NET: Registered PF_INET protocol family [ 0.763691] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.764088] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.764247] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.764394] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.764545] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.764715] TCP: Hash tables configured (established 4096 bind 4096) [ 0.764857] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.765032] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.765216] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.765613] RPC: Registered named UNIX socket transport module. [ 0.765740] RPC: Registered udp transport module. [ 0.765854] RPC: Registered tcp transport module. [ 0.765994] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.766556] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.766728] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.766952] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.767125] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.767273] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.767449] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.767622] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.767756] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.767934] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.768074] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.768221] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.768403] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.768548] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.768671] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.768815] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.768987] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.769136] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.769259] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.769404] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.769547] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.769731] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.769854] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.770020] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.770167] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.770312] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.770447] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.770581] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.770752] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.770939] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.771169] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.771291] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.771430] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.771592] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.771711] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.771850] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.772040] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.772163] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.772304] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.772510] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.772630] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.772769] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.772949] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.773124] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.773281] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.773434] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.773588] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.773740] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.773950] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.774120] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.774275] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.774394] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.774533] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.774667] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.774841] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.775013] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.775135] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.775293] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.775413] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.775535] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.775654] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.775773] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.775930] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.776062] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.776188] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.776304] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.776423] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.776539] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.776696] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.776812] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.776947] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.777079] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.777199] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.777741] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.778034] xen: registering gsi 19 triggering 0 polarity 1 [ 0.778063] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.786845] xen: registering gsi 18 triggering 0 polarity 1 [ 0.786863] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.805166] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 17943 usecs [ 0.805410] xen: registering gsi 18 triggering 0 polarity 1 [ 0.805416] Already setup the GSI :18 [ 0.822128] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 16380 usecs [ 0.822343] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.822546] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.822622] Unpacking initramfs... [ 0.822666] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.823028] kvm: no hardware support for 'kvm_intel' [ 0.830853] has_svm: not amd or hygon [ 0.830996] kvm: no hardware support for 'kvm_amd' [ 0.831115] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.831499] clocksource: Switched to clocksource tsc [ 0.834283] Initialise system trusted keyrings [ 0.834602] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.836096] NFS: Registering the id_resolver key type [ 0.836220] Key type id_resolver registered [ 0.836338] Key type id_legacy registered [ 0.836539] 9p: Installing v9fs 9p2000 file system support [ 0.850406] Key type asymmetric registered [ 0.850534] Asymmetric key parser 'x509' registered [ 0.850682] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.850839] io scheduler mq-deadline registered [ 0.850953] io scheduler kyber registered [ 0.851909] xen: registering gsi 16 triggering 0 polarity 1 [ 0.851939] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.852476] xen: registering gsi 16 triggering 0 polarity 1 [ 0.852482] Already setup the GSI :16 [ 0.853155] xen: registering gsi 16 triggering 0 polarity 1 [ 0.853161] Already setup the GSI :16 [ 0.853483] xen: registering gsi 16 triggering 0 polarity 1 [ 0.853487] Already setup the GSI :16 [ 0.853824] xen: registering gsi 16 triggering 0 polarity 1 [ 0.853828] Already setup the GSI :16 [ 0.854466] xen: registering gsi 16 triggering 0 polarity 1 [ 0.854471] Already setup the GSI :16 [ 0.855083] xen: registering gsi 16 triggering 0 polarity 1 [ 0.855088] Already setup the GSI :16 [ 0.855527] xen: registering gsi 17 triggering 0 polarity 1 [ 0.855544] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.855933] xen: registering gsi 19 triggering 0 polarity 1 [ 0.855938] Already setup the GSI :19 [ 0.856374] xen: registering gsi 16 triggering 0 polarity 1 [ 0.856378] Already setup the GSI :16 [ 0.857056] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.857272] ACPI: button: Power Button [PWRB] [ 0.857419] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.857644] ACPI: button: Power Button [PWRF] [ 0.857895] Monitor-Mwait will be used to enter C-1 state [ 0.857908] Monitor-Mwait will be used to enter C-2 state [ 0.857914] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.858283] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.858709] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.859161] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.859502] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.860115] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.860478] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.860960] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.861870] xen:xen_evtchn: Event-channel device installed [ 0.862072] xen_pciback: backend is vpci [ 0.862861] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.863176] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.863940] hpet_acpi_add: no address or irqs in _CRS [ 0.864138] Non-volatile memory driver v1.3 [ 0.864252] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.866981] loop: module loaded [ 0.873115] ahci 0000:00:1f.2: version 3.0 [ 0.873215] xen: registering gsi 16 triggering 0 polarity 1 [ 0.873224] Already setup the GSI :16 [ 0.873552] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.873717] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.889197] scsi host0: ahci [ 0.889547] scsi host1: ahci [ 0.889885] scsi host2: ahci [ 0.890205] scsi host3: ahci [ 0.890518] scsi host4: ahci [ 0.890855] scsi host5: ahci [ 0.891000] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 0.891146] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 0.891291] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 0.891435] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 0.891591] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 0.891736] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 0.892203] tun: Universal TUN/TAP device driver, 1.6 [ 0.892491] e100: Intel(R) PRO/100 Network Driver [ 0.892647] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.892792] sky2: driver version 1.30 [ 0.892979] xen_netfront: Initialising Xen virtual ethernet driver [ 0.893335] xen: registering gsi 18 triggering 0 polarity 1 [ 0.893344] Already setup the GSI :18 [ 0.893551] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.893761] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.893938] ehci-pci 0000:00:1a.0: debug port 2 [ 0.898072] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.904633] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.904863] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.905012] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.905156] usb usb1: Product: EHCI Host Controller [ 0.905270] usb usb1: Manufacturer: Linux 6.1.111+ ehci_hcd [ 0.905387] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.905696] hub 1-0:1.0: USB hub found [ 0.905822] hub 1-0:1.0: 2 ports detected [ 0.906187] xen: registering gsi 18 triggering 0 polarity 1 [ 0.906196] Already setup the GSI :18 [ 0.906388] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.906595] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.906771] ehci-pci 0000:00:1d.0: debug port 2 [ 0.910846] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.917633] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.917857] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.918005] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.918176] usb usb2: Product: EHCI Host Controller [ 0.918291] usb usb2: Manufacturer: Linux 6.1.111+ ehci_hcd [ 0.918407] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.918703] hub 2-0:1.0: USB hub found [ 0.918828] hub 2-0:1.0: 2 ports detected [ 0.919259] xen: registering gsi 19 triggering 0 polarity 1 [ 0.919268] Already setup the GSI :19 [ 0.919489] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.919705] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.920931] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.921396] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.921610] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.921757] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.921964] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.922112] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.922286] usb usb3: Product: xHCI Host Controller [ 0.922402] usb usb3: Manufacturer: Linux 6.1.111+ xhci-hcd [ 0.922518] usb usb3: SerialNumber: 0000:00:14.0 [ 0.922810] hub 3-0:1.0: USB hub found [ 0.922942] hub 3-0:1.0: 8 ports detected [ 0.924099] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.924253] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.924397] usb usb4: Product: xHCI Host Controller [ 0.924512] usb usb4: Manufacturer: Linux 6.1.111+ xhci-hcd [ 0.924639] usb usb4: SerialNumber: 0000:00:14.0 [ 0.924893] hub 4-0:1.0: USB hub found [ 0.925047] hub 4-0:1.0: 6 ports detected [ 0.926204] usbcore: registered new interface driver usblp [ 0.926343] usbcore: registered new interface driver usb-storage [ 0.928592] Freeing initrd memory: 20628K [ 0.928875] i8042: PNP: No PS/2 controller found. [ 0.929204] rtc_cmos 00:00: RTC can wake from S4 [ 0.929874] rtc_cmos 00:00: registered as rtc0 [ 0.930031] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.930247] device-mapper: uevent: version 1.0.3 [ 0.930333] xen: registering gsi 18 triggering 0 polarity 1 [ 0.930370] Already setup the GSI :18 [ 0.930484] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.930517] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.930657] intel_pstate: CPU model not supported [ 0.930686] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.930788] hid: raw HID events driver (C) Jiri Kosina [ 0.931248] usbcore: registered new interface driver usbhid [ 0.931312] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.931365] usbhid: USB HID core driver [ 0.932040] Initializing XFRM netlink socket [ 0.932276] NET: Registered PF_INET6 protocol family [ 0.932864] Segment Routing with IPv6 [ 0.932985] In-situ OAM (IOAM) with IPv6 [ 0.933128] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.933374] NET: Registered PF_PACKET protocol family [ 0.933527] 9pnet: Installing 9P2000 support [ 0.933673] Key type dns_resolver registered [ 0.934452] IPI shorthand broadcast: enabled [ 0.934605] sched_clock: Marking stable (897005274, 37574415)->(1782708568, -848128879) [ 0.935206] registered taskstats version 1 [ 0.935323] Loading compiled-in X.509 certificates [ 0.937811] PM: Magic number: 8:368:364 [ 0.937960] msr msr3: hash matches [ 0.938096] pci 0000:ff:0f.0: hash matches [ 0.938264] printk: console [netcon0] enabled [ 0.938378] netconsole: network logging started [ 0.938730] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.950753] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.951099] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.951710] ALSA device list: [ 0.951779] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.951837] No soundcards found. [ 1.143688] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.159641] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.159785] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.204584] ata6: SATA link down (SStatus 0 SControl 300) [ 1.204776] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.204919] ata5: SATA link down (SStatus 0 SControl 300) [ 1.205059] ata4: SATA link down (SStatus 0 SControl 300) [ 1.205218] ata1: SATA link down (SStatus 0 SControl 300) [ 1.205354] ata2: SATA link down (SStatus 0 SControl 300) [ 1.205964] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.272013] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.272167] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.272580] hub 1-1:1.0: USB hub found [ 1.273028] hub 1-1:1.0: 4 ports detected [ 1.287235] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.287503] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.287698] usb 3-3: Product: USB2.0 Hub [ 1.287932] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.288068] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.288261] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.288432] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.288807] hub 2-1:1.0: USB hub found [ 1.289009] hub 2-1:1.0: 4 ports detected [ 1.289134] hub 3-3:1.0: USB hub found [ 1.289592] hub 3-3:1.0: 4 ports detected [ 1.316148] ata3.00: configured for UDMA/133 [ 1.316618] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.317560] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.317655] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.317921] sd 2:0:0:0: [sda] Write Protect is off [ 1.318043] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.318113] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.318348] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.336977] sda: sda1 sda2 < sda5 > [ 1.337330] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.338591] Freeing unused kernel image (initmem) memory: 1580K [ 1.338720] Write protecting the kernel read-only data: 22528k [ 1.357093] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.358439] Freeing unused kernel image (rodata/data gap) memory: 1560K [ 1.405626] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.531946] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.532106] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.532751] hub 3-4:1.0: USB hub found [ 1.532971] hub 3-4:1.0: 4 ports detected [ 1.595645] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.673173] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.673328] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.673474] usb 3-3.2: Product: USB2.0 Hub [ 1.674142] hub 3-3.2:1.0: USB hub found [ 1.674605] hub 3-3.2:1.0: 4 ports detected [ 1.827619] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.829277] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.829405] Run /init as init process [ 1.829515] with arguments: [ 1.829516] /init [ 1.829517] placeholder [ 1.829518] with environment: [ 1.829519] HOME=/ [ 1.829520] TERM=linux [ 1.932938] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.933100] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.938923] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 2.270761] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.270927] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.271378] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.271699] xen: registering gsi 16 triggering 0 polarity 1 [ 2.271710] Already setup the GSI :16 [ 2.273554] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.273698] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.273900] xen: registering gsi 16 triggering 0 polarity 1 [ 2.273907] Already setup the GSI :16 [ 2.288810] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 2.290113] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 2.290398] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.300211] pps pps0: new PPS source ptp0 [ 2.300449] igb 0000:07:00.0: added PHC on eth0 [ 2.300594] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.300736] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.300902] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.301017] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.301246] xen: registering gsi 17 triggering 0 polarity 1 [ 2.301254] Already setup the GSI :17 [ 2.330795] pps pps1: new PPS source ptp1 [ 2.330976] igb 0000:08:00.0: added PHC on eth1 [ 2.331134] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.331260] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.331425] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.331541] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.331781] xen: registering gsi 16 triggering 0 polarity 1 [ 2.331788] Already setup the GSI :16 [ 2.388507] igb 0000:0b:00.0: added PHC on eth2 [ 2.388655] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.388777] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.388981] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.389096] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.389319] xen: registering gsi 17 triggering 0 polarity 1 [ 2.389330] Already setup the GSI :17 [ 2.447174] igb 0000:0b:00.1: added PHC on eth3 [ 2.447312] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.447434] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.447631] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.447748] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.447985] xen: registering gsi 18 triggering 0 polarity 1 [ 2.447993] Already setup the GSI :18 [ 2.505327] igb 0000:0b:00.2: added PHC on eth4 [ 2.505475] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.505620] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.505822] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.505958] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.506197] xen: registering gsi 19 triggering 0 polarity 1 [ 2.506206] Already setup the GSI :19 [ 2.561991] igb 0000:0b:00.3: added PHC on eth5 [ 2.562131] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.562252] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.562456] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.562571] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.565749] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.579052] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.586887] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.600827] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.614086] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.626001] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 3.011978] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.141765] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.141964] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.435860] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.436184] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.436409] xen: registering gsi 17 triggering 0 polarity 1 [ 3.436420] Already setup the GSI :17 [ 4.178599] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.308526] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.308705] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.603594] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.606090] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.614199] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 5.011803] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.032844] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.352879] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.293716] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.315783] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.402223] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 10.913310] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 10.913478] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 10.913704] device enx0cc47a9f87be entered promiscuous mode [ 14.406206] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 14.509986] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 14.510273] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 14.510395] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 14.510702] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready