[ 0.000000] Linux version 6.1.111+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Sun Sep 29 07:49:53 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000459] tsc: Detected 2199.998 MHz processor [ 0.000896] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000900] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000907] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000908] Disabled [ 0.000909] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000913] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000952] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027657] RAMDISK: [mem 0x04000000-0x05424fff] [ 0.027665] ACPI: Early table checksum verification disabled [ 0.028264] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028276] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028312] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028360] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028376] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028392] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028408] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028424] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028440] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028456] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028473] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028489] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028505] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028521] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028537] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028553] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028569] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028585] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028601] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028617] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028633] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028649] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028657] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028659] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028660] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028661] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028662] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028663] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028664] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028665] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028666] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028667] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028668] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028669] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028670] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028671] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028672] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028673] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028674] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028675] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028676] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028677] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028726] Setting APIC routing to Xen PV. [ 0.032660] Zone ranges: [ 0.032662] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032664] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032666] Normal empty [ 0.032667] Movable zone start for each node [ 0.032668] Early memory node ranges [ 0.032668] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032670] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032672] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032677] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032712] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034273] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034277] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221763] Remapped 102 page(s) [ 0.223136] ACPI: PM-Timer IO Port: 0x408 [ 0.223189] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223192] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223194] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223195] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223197] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223198] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223200] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223201] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223229] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223242] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223245] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223271] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223275] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223344] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223359] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223361] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223363] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223365] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223369] Booting kernel on Xen [ 0.223370] Xen version: 4.20-unstable (preserve-AD) [ 0.223373] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229612] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.229895] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.229902] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.229905] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.229983] xen: PV spinlocks enabled [ 0.229986] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.229991] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.229993] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230030] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230040] random: crng init done [ 0.230088] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230114] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231428] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231431] software IO TLB: area num 8. [ 0.290757] Memory: 389288K/524284K available (14349K kernel code, 2686K rwdata, 4584K rodata, 1580K init, 1288K bss, 134744K reserved, 0K cma-reserved) [ 0.290925] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.293401] Dynamic Preempt: voluntary [ 0.293500] rcu: Preemptible hierarchical RCU implementation. [ 0.293501] rcu: RCU event tracing is enabled. [ 0.293501] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.293503] Trampoline variant of Tasks RCU enabled. [ 0.293504] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.293505] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.304061] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.304185] xen:events: Using FIFO-based ABI [ 0.304209] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.304217] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.304225] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.304232] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.304240] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.304247] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.304254] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.304262] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.304269] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.304277] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.304284] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.304292] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.304299] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.304308] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.304315] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.304326] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.309698] Console: colour VGA+ 80x25 [ 0.324511] printk: console [tty0] enabled [ 0.325837] printk: console [hvc0] enabled [ 0.325976] ACPI: Core revision 20220331 [ 0.341471] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.341639] Xen: using vcpuop timer interface [ 0.341647] installing Xen timer for CPU 0 [ 0.341800] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.341959] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199998) [ 0.342290] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.342407] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.342535] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.342684] Spectre V2 : Mitigation: Retpolines [ 0.342966] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.343114] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.343234] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.343355] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.343503] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.343622] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.343774] MDS: Mitigation: Clear CPU buffers [ 0.343887] TAA: Mitigation: Clear CPU buffers [ 0.343963] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.344130] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.344276] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.344425] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.344544] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.344664] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.362318] Freeing SMP alternatives memory: 40K [ 0.362445] pid_max: default: 32768 minimum: 301 [ 0.362981] LSM: Security Framework initializing [ 0.363103] SELinux: Initializing. [ 0.363242] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363397] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364051] cpu 0 spinlock event irq 25 [ 0.364171] VPMU disabled by hypervisor. [ 0.364609] cblist_init_generic: Setting adjustable number of callback queues. [ 0.364757] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.364915] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.364965] signal: max sigframe size: 1776 [ 0.365128] rcu: Hierarchical SRCU implementation. [ 0.365253] rcu: Max phase no-delay instances is 400. [ 0.365744] smp: Bringing up secondary CPUs ... [ 0.366082] installing Xen timer for CPU 1 [ 0.366549] cpu 1 spinlock event irq 35 [ 0.367099] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.367268] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.367457] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.368184] installing Xen timer for CPU 2 [ 0.368651] cpu 2 spinlock event irq 41 [ 0.369082] installing Xen timer for CPU 3 [ 0.369538] cpu 3 spinlock event irq 47 [ 0.369538] installing Xen timer for CPU 4 [ 0.370324] cpu 4 spinlock event irq 53 [ 0.370324] installing Xen timer for CPU 5 [ 0.371121] cpu 5 spinlock event irq 59 [ 0.371168] installing Xen timer for CPU 6 [ 0.372002] cpu 6 spinlock event irq 65 [ 0.372214] installing Xen timer for CPU 7 [ 0.372642] cpu 7 spinlock event irq 71 [ 0.373227] smp: Brought up 1 node, 8 CPUs [ 0.373346] smpboot: Max logical packages: 1 [ 0.373565] devtmpfs: initialized [ 0.373565] x86/mm: Memory block size: 128MB [ 0.374193] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.374231] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.374387] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.374963] PM: RTC time: 08:05:38, date: 2024-09-29 [ 0.375222] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.375369] xen:grant_table: Grant tables using version 1 layout [ 0.375507] Grant table initialized [ 0.375813] audit: initializing netlink subsys (disabled) [ 0.375983] audit: type=2000 audit(1727597139.062:1): state=initialized audit_enabled=0 res=1 [ 0.376031] thermal_sys: Registered thermal governor 'step_wise' [ 0.376031] thermal_sys: Registered thermal governor 'user_space' [ 0.376159] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.376585] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.376966] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.503748] PCI: Using configuration type 1 for base access [ 0.506388] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.507022] ACPI: Added _OSI(Module Device) [ 0.507124] ACPI: Added _OSI(Processor Device) [ 0.507237] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.507351] ACPI: Added _OSI(Processor Aggregator Device) [ 0.537694] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.539689] xen: registering gsi 9 triggering 0 polarity 0 [ 0.542218] ACPI: Dynamic OEM Table Load: [ 0.548851] ACPI: Interpreter enabled [ 0.548979] ACPI: PM: (supports S0 S4 S5) [ 0.549092] ACPI: Using IOAPIC for interrupt routing [ 0.549245] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.549397] PCI: Using E820 reservations for host bridge windows [ 0.549958] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.585754] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.585911] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.586052] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.586515] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.586636] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.586815] PCI host bridge to bus 0000:ff [ 0.586928] pci_bus 0000:ff: root bus resource [bus ff] [ 0.587041] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.587521] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.587948] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.588268] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.588734] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.589204] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.589650] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.590253] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.590703] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.591160] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.591589] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.592022] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.592479] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.592901] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.593279] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.593906] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.594266] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.594693] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.594954] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.595414] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.595886] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.596330] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.596977] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.597445] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.598158] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.598619] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.599071] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.599503] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.599971] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.600454] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.600921] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.601306] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.601954] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.602378] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.602801] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.603263] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.603729] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.604198] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.604890] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.605568] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.606027] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.606451] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.606878] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.607096] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.607566] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.607995] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.608422] pci_bus 0000:ff: on NUMA node 0 [ 0.613154] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.613480] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.613758] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.614118] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.614239] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.614718] PCI host bridge to bus 0000:00 [ 0.614833] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.614955] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.615074] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.615220] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.615380] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.615579] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.615579] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.615745] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.615958] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.615958] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.617250] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.617767] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.618124] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.618667] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.619041] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.619754] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.620157] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.620861] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.621228] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.621827] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.622451] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.623148] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.623366] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.623828] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.624427] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.624648] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.625119] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.625464] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.625684] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.626147] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.626522] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.626726] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.627487] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.627810] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.628579] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.628780] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.628903] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.638152] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.638710] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.638940] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.638971] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.639264] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.639818] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.640029] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.640187] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.640481] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.641043] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.641238] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.641359] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.641717] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.641915] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.642378] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.642698] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.643479] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.643673] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.643831] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.643992] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.644178] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.644335] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.644493] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.644809] pci 0000:00:1f.2: PME# supported from D3hot [ 0.644809] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.644809] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.644809] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.644958] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.644958] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.644958] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.646141] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.646474] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.646686] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.647461] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.647675] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.648379] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.648620] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.649328] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.649541] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.650264] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.650399] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.650738] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.650950] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.651237] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.651441] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.651792] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.652016] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.652138] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.652342] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.652463] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.653061] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.653275] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.653564] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.653749] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.654126] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.654329] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.654450] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.654654] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.654775] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.655333] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.655501] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.655639] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.655929] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.656140] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.656503] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.656623] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.656862] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.657059] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.657225] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.657755] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.658246] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.658372] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.658500] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.658852] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.658963] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.659170] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.659386] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.659580] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.660108] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.660573] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.660699] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.660848] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.661181] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.661575] pci 0000:09:00.0: enabling Extended Tags [ 0.661915] pci 0000:09:00.0: supports D1 D2 [ 0.661962] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.662345] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.662472] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.662600] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.662902] pci_bus 0000:0a: extended config space not accessible [ 0.663014] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.663225] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.663392] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.663585] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.663939] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.664105] pci 0000:0a:00.0: supports D1 D2 [ 0.664218] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.664655] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.664826] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.664956] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.665341] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.665542] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.665751] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.665913] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.666386] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.666620] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.666766] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.666985] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.667130] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.667721] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.667922] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.668053] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.668214] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.668752] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.668981] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.669127] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.669345] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.669490] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.670010] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.670250] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.670460] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.670622] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.671134] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.671364] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.671534] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.671753] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.671897] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.672326] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.672527] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.672769] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.672931] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.673354] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.673583] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.673728] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.673946] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.674962] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.675543] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.675669] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.675798] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.675938] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.676338] pci_bus 0000:00: on NUMA node 0 [ 0.676432] xen: registering gsi 13 triggering 1 polarity 0 [ 0.677399] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.677626] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.677815] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.678009] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.678199] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.678317] ACPI: PCI: Interrupt link LNKE disabled [ 0.678501] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.678619] ACPI: PCI: Interrupt link LNKF disabled [ 0.678803] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.678948] ACPI: PCI: Interrupt link LNKG disabled [ 0.679034] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.679153] ACPI: PCI: Interrupt link LNKH disabled [ 0.679418] xen:balloon: Initialising balloon driver [ 0.679558] iommu: Default domain type: Translated [ 0.686965] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.687153] SCSI subsystem initialized [ 0.687281] libata version 3.00 loaded. [ 0.687281] ACPI: bus type USB registered [ 0.687281] usbcore: registered new interface driver usbfs [ 0.687281] usbcore: registered new interface driver hub [ 0.687404] usbcore: registered new device driver usb [ 0.687978] pps_core: LinuxPPS API ver. 1 registered [ 0.688094] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.688245] PTP clock support registered [ 0.688381] Advanced Linux Sound Architecture Driver Initialized. [ 0.688381] NetLabel: Initializing [ 0.688964] NetLabel: domain hash size = 128 [ 0.689077] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.689217] NetLabel: unlabeled traffic allowed by default [ 0.689358] PCI: Using ACPI for IRQ routing [ 0.724713] PCI: pci_cache_line_size set to 64 bytes [ 0.725494] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.725497] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.726004] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.726126] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.726244] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.726244] vgaarb: loaded [ 0.727964] clocksource: Switched to clocksource tsc-early [ 0.728213] VFS: Disk quotas dquot_6.6.0 [ 0.728338] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.728483] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.728641] pnp: PnP ACPI init [ 0.729127] xen: registering gsi 8 triggering 1 polarity 0 [ 0.729272] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.729397] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.729521] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.729653] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.729772] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.729890] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.730024] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.730149] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.730269] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.730390] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.730510] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.730630] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.730750] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.731165] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.731287] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.731406] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.731524] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.731643] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.732088] xen: registering gsi 4 triggering 1 polarity 0 [ 0.732094] Already setup the GSI :4 [ 0.732207] pnp 00:03: [dma 0 disabled] [ 0.732521] xen: registering gsi 3 triggering 1 polarity 0 [ 0.732533] pnp 00:04: [dma 0 disabled] [ 0.733136] pnp: PnP ACPI: found 5 devices [ 0.764540] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.764698] NET: Registered PF_INET protocol family [ 0.764859] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.765258] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.765412] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.765561] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.765736] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.765907] TCP: Hash tables configured (established 4096 bind 4096) [ 0.766102] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.766252] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.766407] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.766808] RPC: Registered named UNIX socket transport module. [ 0.766981] RPC: Registered udp transport module. [ 0.767110] RPC: Registered tcp transport module. [ 0.767225] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.767761] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.767933] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.768117] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.768280] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.768460] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.768636] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.768810] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.768944] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.769127] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.769252] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.769398] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.769542] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.769688] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.769849] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.770013] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.770169] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.770315] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.770438] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.770583] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.770727] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.770873] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.771014] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.771195] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.771339] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.771485] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.771620] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.771754] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.771925] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.772126] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.772302] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.772422] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.772586] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.772747] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.772867] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.773029] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.773199] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.773320] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.773461] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.773627] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.773747] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.773919] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.774111] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.774272] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.774426] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.774580] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.774733] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.774886] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.775067] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.775223] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.775409] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.775529] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.775669] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.775803] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.775988] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.776154] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.776276] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.776395] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.776516] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.776661] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.776789] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.776908] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.777074] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.777193] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.777318] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.777434] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.777553] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.777670] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.777789] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.777905] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.778073] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.778199] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.778318] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.778863] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.779114] xen: registering gsi 19 triggering 0 polarity 1 [ 0.779143] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.787930] xen: registering gsi 18 triggering 0 polarity 1 [ 0.787948] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.803259] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 15021 usecs [ 0.803503] xen: registering gsi 18 triggering 0 polarity 1 [ 0.803510] Already setup the GSI :18 [ 0.819249] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 15430 usecs [ 0.819461] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.819647] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.819719] Unpacking initramfs... [ 0.819767] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.820133] kvm: no hardware support for 'kvm_intel' [ 0.828075] has_svm: not amd or hygon [ 0.828191] kvm: no hardware support for 'kvm_amd' [ 0.828307] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.828615] clocksource: Switched to clocksource tsc [ 0.831001] Initialise system trusted keyrings [ 0.831321] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.832835] NFS: Registering the id_resolver key type [ 0.832960] Key type id_resolver registered [ 0.833072] Key type id_legacy registered [ 0.833271] 9p: Installing v9fs 9p2000 file system support [ 0.847563] Key type asymmetric registered [ 0.847700] Asymmetric key parser 'x509' registered [ 0.847839] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.847995] io scheduler mq-deadline registered [ 0.848113] io scheduler kyber registered [ 0.849047] xen: registering gsi 16 triggering 0 polarity 1 [ 0.849079] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.849612] xen: registering gsi 16 triggering 0 polarity 1 [ 0.849618] Already setup the GSI :16 [ 0.850247] xen: registering gsi 16 triggering 0 polarity 1 [ 0.850252] Already setup the GSI :16 [ 0.850574] xen: registering gsi 16 triggering 0 polarity 1 [ 0.850577] Already setup the GSI :16 [ 0.850910] xen: registering gsi 16 triggering 0 polarity 1 [ 0.850914] Already setup the GSI :16 [ 0.851487] xen: registering gsi 16 triggering 0 polarity 1 [ 0.851492] Already setup the GSI :16 [ 0.852079] xen: registering gsi 16 triggering 0 polarity 1 [ 0.852084] Already setup the GSI :16 [ 0.852519] xen: registering gsi 17 triggering 0 polarity 1 [ 0.852537] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.852891] xen: registering gsi 19 triggering 0 polarity 1 [ 0.852896] Already setup the GSI :19 [ 0.853333] xen: registering gsi 16 triggering 0 polarity 1 [ 0.853337] Already setup the GSI :16 [ 0.854016] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.854190] ACPI: button: Power Button [PWRB] [ 0.854339] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.854593] ACPI: button: Power Button [PWRF] [ 0.854895] Monitor-Mwait will be used to enter C-1 state [ 0.854932] Monitor-Mwait will be used to enter C-2 state [ 0.854948] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.855361] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.855739] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.856260] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.856778] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.857132] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.857615] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.858005] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.858872] xen:xen_evtchn: Event-channel device installed [ 0.859070] xen_pciback: backend is vpci [ 0.859779] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.860094] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.860848] hpet_acpi_add: no address or irqs in _CRS [ 0.861082] Non-volatile memory driver v1.3 [ 0.861203] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.863672] loop: module loaded [ 0.869547] ahci 0000:00:1f.2: version 3.0 [ 0.869731] xen: registering gsi 16 triggering 0 polarity 1 [ 0.869742] Already setup the GSI :16 [ 0.870076] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.870227] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.885277] scsi host0: ahci [ 0.885678] scsi host1: ahci [ 0.886099] scsi host2: ahci [ 0.886476] scsi host3: ahci [ 0.886877] scsi host4: ahci [ 0.887325] scsi host5: ahci [ 0.887476] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 74 [ 0.887661] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 74 [ 0.887807] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 74 [ 0.887951] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 74 [ 0.888096] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 74 [ 0.888240] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 74 [ 0.888692] tun: Universal TUN/TAP device driver, 1.6 [ 0.888989] e100: Intel(R) PRO/100 Network Driver [ 0.889111] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.889249] sky2: driver version 1.30 [ 0.889438] xen_netfront: Initialising Xen virtual ethernet driver [ 0.889806] xen: registering gsi 18 triggering 0 polarity 1 [ 0.889815] Already setup the GSI :18 [ 0.890023] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.890224] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.890406] ehci-pci 0000:00:1a.0: debug port 2 [ 0.894553] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.901701] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.901934] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.902083] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.902228] usb usb1: Product: EHCI Host Controller [ 0.902343] usb usb1: Manufacturer: Linux 6.1.111+ ehci_hcd [ 0.902459] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.902771] hub 1-0:1.0: USB hub found [ 0.902898] hub 1-0:1.0: 2 ports detected [ 0.903270] xen: registering gsi 18 triggering 0 polarity 1 [ 0.903280] Already setup the GSI :18 [ 0.903473] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.903711] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.903888] ehci-pci 0000:00:1d.0: debug port 2 [ 0.908000] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.914685] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.914906] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.915054] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.915199] usb usb2: Product: EHCI Host Controller [ 0.915321] usb usb2: Manufacturer: Linux 6.1.111+ ehci_hcd [ 0.915437] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.915732] hub 2-0:1.0: USB hub found [ 0.915858] hub 2-0:1.0: 2 ports detected [ 0.916291] xen: registering gsi 19 triggering 0 polarity 1 [ 0.916301] Already setup the GSI :19 [ 0.916506] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.916708] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.917928] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.918408] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.918610] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.918767] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.918974] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.919122] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.919266] usb usb3: Product: xHCI Host Controller [ 0.919380] usb usb3: Manufacturer: Linux 6.1.111+ xhci-hcd [ 0.919529] usb usb3: SerialNumber: 0000:00:14.0 [ 0.919814] hub 3-0:1.0: USB hub found [ 0.919947] hub 3-0:1.0: 8 ports detected [ 0.921106] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.921260] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.921405] usb usb4: Product: xHCI Host Controller [ 0.921519] usb usb4: Manufacturer: Linux 6.1.111+ xhci-hcd [ 0.921650] usb usb4: SerialNumber: 0000:00:14.0 [ 0.921894] hub 4-0:1.0: USB hub found [ 0.922026] hub 4-0:1.0: 6 ports detected [ 0.923204] usbcore: registered new interface driver usblp [ 0.923347] usbcore: registered new interface driver usb-storage [ 0.925294] Freeing initrd memory: 20628K [ 0.925571] i8042: PNP: No PS/2 controller found. [ 0.925916] rtc_cmos 00:00: RTC can wake from S4 [ 0.926568] rtc_cmos 00:00: registered as rtc0 [ 0.926739] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.926952] device-mapper: uevent: version 1.0.3 [ 0.927033] xen: registering gsi 18 triggering 0 polarity 1 [ 0.927075] Already setup the GSI :18 [ 0.927186] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.927223] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.927343] intel_pstate: CPU model not supported [ 0.927374] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.927476] hid: raw HID events driver (C) Jiri Kosina [ 0.927950] usbcore: registered new interface driver usbhid [ 0.928068] usbhid: USB HID core driver [ 0.928078] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.928810] Initializing XFRM netlink socket [ 0.929049] NET: Registered PF_INET6 protocol family [ 0.929557] Segment Routing with IPv6 [ 0.929697] In-situ OAM (IOAM) with IPv6 [ 0.929841] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.930077] NET: Registered PF_PACKET protocol family [ 0.930230] 9pnet: Installing 9P2000 support [ 0.930355] Key type dns_resolver registered [ 0.931126] IPI shorthand broadcast: enabled [ 0.931265] sched_clock: Marking stable (893455567, 37629520)->(1778115054, -847029967) [ 0.931855] registered taskstats version 1 [ 0.931989] Loading compiled-in X.509 certificates [ 0.934559] PM: Magic number: 8:558:69 [ 0.934810] xen_cpu xen_cpu0: hash matches [ 0.934932] printk: console [netcon0] enabled [ 0.935047] netconsole: network logging started [ 0.935383] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.947391] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.947757] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.948419] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.948620] ALSA device list: [ 0.948772] No soundcards found. [ 1.143779] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.151767] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.159662] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.196736] ata5: SATA link down (SStatus 0 SControl 300) [ 1.196873] ata6: SATA link down (SStatus 0 SControl 300) [ 1.197014] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.197165] ata1: SATA link down (SStatus 0 SControl 300) [ 1.197296] ata4: SATA link down (SStatus 0 SControl 300) [ 1.197451] ata2: SATA link down (SStatus 0 SControl 300) [ 1.198381] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.272130] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.272286] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.272664] hub 1-1:1.0: USB hub found [ 1.272919] hub 1-1:1.0: 4 ports detected [ 1.280294] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.280450] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.280801] hub 2-1:1.0: USB hub found [ 1.281026] hub 2-1:1.0: 4 ports detected [ 1.286171] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.286304] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.287321] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.287476] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.287600] usb 3-3: Product: USB2.0 Hub [ 1.288395] hub 3-3:1.0: USB hub found [ 1.288885] hub 3-3:1.0: 4 ports detected [ 1.314096] ata3.00: configured for UDMA/133 [ 1.314392] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.315252] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.315362] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.315578] sd 2:0:0:0: [sda] Write Protect is off [ 1.315728] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.315798] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.316032] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.335384] sda: sda1 sda2 < sda5 > [ 1.335789] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.337009] Freeing unused kernel image (initmem) memory: 1580K [ 1.337138] Write protecting the kernel read-only data: 22528k [ 1.355047] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.356326] Freeing unused kernel image (rodata/data gap) memory: 1560K [ 1.405677] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.531975] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.532128] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.532860] hub 3-4:1.0: USB hub found [ 1.533075] hub 3-4:1.0: 4 ports detected [ 1.595699] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.673127] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.673283] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.673429] usb 3-3.2: Product: USB2.0 Hub [ 1.674118] hub 3-3.2:1.0: USB hub found [ 1.674596] hub 3-3.2:1.0: 4 ports detected [ 1.817387] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.817515] Run /init as init process [ 1.817625] with arguments: [ 1.817626] /init [ 1.817628] placeholder [ 1.817642] with environment: [ 1.817643] HOME=/ [ 1.817644] TERM=linux [ 1.826656] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.932170] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.932332] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.938207] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 2.258858] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 2.261319] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.261499] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.261723] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 2.261935] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.262214] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.262257] xen: registering gsi 16 triggering 0 polarity 1 [ 2.262441] Already setup the GSI :16 [ 2.267455] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.267611] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.267924] xen: registering gsi 16 triggering 0 polarity 1 [ 2.267936] Already setup the GSI :16 [ 2.294725] pps pps0: new PPS source ptp0 [ 2.294907] igb 0000:07:00.0: added PHC on eth0 [ 2.295047] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.295169] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.295334] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.295450] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.295752] xen: registering gsi 17 triggering 0 polarity 1 [ 2.295761] Already setup the GSI :17 [ 2.325375] pps pps1: new PPS source ptp1 [ 2.325592] igb 0000:08:00.0: added PHC on eth1 [ 2.325738] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.325860] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.326025] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.326141] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.326373] xen: registering gsi 16 triggering 0 polarity 1 [ 2.326381] Already setup the GSI :16 [ 2.384478] igb 0000:0b:00.0: added PHC on eth2 [ 2.384617] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.384755] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.384960] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.385102] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.385334] xen: registering gsi 17 triggering 0 polarity 1 [ 2.385343] Already setup the GSI :17 [ 2.443405] igb 0000:0b:00.1: added PHC on eth3 [ 2.443545] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.443679] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.443883] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.444002] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.444240] xen: registering gsi 18 triggering 0 polarity 1 [ 2.444248] Already setup the GSI :18 [ 2.501278] igb 0000:0b:00.2: added PHC on eth4 [ 2.501421] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.501543] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.501790] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.501913] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.502184] xen: registering gsi 19 triggering 0 polarity 1 [ 2.502193] Already setup the GSI :19 [ 2.559059] igb 0000:0b:00.3: added PHC on eth5 [ 2.559198] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.559321] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.559526] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.559657] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.562943] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.577252] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.590047] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.601105] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.609076] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.617317] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 2.999750] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.128288] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.128419] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.419560] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.419929] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.420148] xen: registering gsi 17 triggering 0 polarity 1 [ 3.420158] Already setup the GSI :17 [ 4.162663] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.294677] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.294840] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.587567] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.589903] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.600189] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 5.002733] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.010974] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.543823] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.672005] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.689029] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.767377] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.309468] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.309708] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.309901] device enx0cc47a9f87be entered promiscuous mode [ 14.873258] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 14.981975] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 14.982279] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 14.982403] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 14.982712] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready