[ 0.000000] Linux version 6.11.0+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Sun Sep 29 17:40:29 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/pinot1--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000f6000000-0x00000000f6003fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SML/H8SML, BIOS 3.5 11/25/2013 [ 0.000000] DMI: Memory slots populated: 2/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000012] Xen PV: Detected 4 vCPUS [ 0.038442] tsc: Fast TSC calibration using PIT [ 0.038444] tsc: Detected 2799.836 MHz processor [ 0.038445] tsc: Detected 2799.988 MHz TSC [ 0.038669] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.038673] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.038680] last_pfn = 0xdfeb2 max_arch_pfn = 0x400000000 [ 0.038683] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.038685] MTRRs set to read-only [ 0.038688] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.064998] RAMDISK: [mem 0x04000000-0x05473fff] [ 0.065018] ACPI: Early table checksum verification disabled [ 0.066113] ACPI: RSDP 0x00000000000FA1C0 000024 (v02 ACPIAM) [ 0.066124] ACPI: XSDT 0x00000000DFEA0100 00007C (v01 SMCI 20131125 MSFT 00000097) [ 0.066159] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.066207] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20240827/tbfadt-560) [ 0.066218] ACPI: DSDT 0x00000000DFEA0600 00562B (v01 1CF11 1CF11000 00000000 INTL 20051117) [ 0.066230] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.066239] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.066250] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.066260] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.066270] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.066281] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.066292] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.066303] ACPI: SSDT 0x00000000DFEAA6F0 000B9C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.066313] ACPI: EINJ 0x00000000DFEAB290 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.066324] ACPI: BERT 0x00000000DFEAB420 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.066334] ACPI: ERST 0x00000000DFEAB450 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.066345] ACPI: HEST 0x00000000DFEAB660 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.066350] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.066353] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c2a] [ 0.066354] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.066355] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.066357] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.066358] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.066359] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.066360] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.066361] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.066362] ACPI: Reserving SSDT table memory at [mem 0xdfeaa6f0-0xdfeab28b] [ 0.066363] ACPI: Reserving EINJ table memory at [mem 0xdfeab290-0xdfeab3bf] [ 0.066364] ACPI: Reserving BERT table memory at [mem 0xdfeab420-0xdfeab44f] [ 0.066365] ACPI: Reserving ERST table memory at [mem 0xdfeab450-0xdfeab65f] [ 0.066367] ACPI: Reserving HEST table memory at [mem 0xdfeab660-0xdfeab707] [ 0.066485] APIC: Switched APIC routing to: Xen PV [ 0.068958] Zone ranges: [ 0.068960] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.068962] DMA32 [mem 0x0000000001000000-0x00000000dfeb1fff] [ 0.068964] Normal empty [ 0.068966] Movable zone start for each node [ 0.068967] Early memory node ranges [ 0.068967] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.068970] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.068972] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.068982] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.069076] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.073222] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.073234] p2m virtual area at (____ptrval____), size is 40000000 [ 0.337067] Remapped 102 page(s) [ 0.337074] Remapped 0 non-RAM page(s) [ 0.337639] ACPI: PM-Timer IO Port: 0x808 [ 0.337671] CPU topo: CPU limit of 4 reached. Ignoring further CPUs [ 0.337702] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.337706] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.337729] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.337737] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.337749] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.337754] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.337776] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.337780] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.337793] CPU topo: Max. logical packages: 1 [ 0.337794] CPU topo: Max. logical dies: 1 [ 0.337795] CPU topo: Max. dies per package: 1 [ 0.337801] CPU topo: Max. threads per core: 1 [ 0.337802] CPU topo: Num. cores per package: 4 [ 0.337803] CPU topo: Num. threads per package: 4 [ 0.337804] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.337805] CPU topo: Rejected CPUs 4 [ 0.337823] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.337826] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.337827] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.337829] PM: hibernation: Registered nosave memory: [mem 0x20066000-0xdfe9dfff] [ 0.337830] PM: hibernation: Registered nosave memory: [mem 0xdfe9e000-0xdfe9ffff] [ 0.337831] PM: hibernation: Registered nosave memory: [mem 0xdfea0000-0xdfeb1fff] [ 0.337834] [mem 0x20066000-0xdfe9dfff] available for PCI devices [ 0.337847] Booting kernel on Xen [ 0.337848] Xen version: 4.20-unstable (preserve-AD) [ 0.337852] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.344369] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.345281] percpu: Embedded 57 pages/cpu s194520 r8192 d30760 u524288 [ 0.345290] pcpu-alloc: s194520 r8192 d30760 u524288 alloc=1*2097152 [ 0.345294] pcpu-alloc: [0] 0 1 2 3 [ 0.345382] xen: PV spinlocks enabled [ 0.345385] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.345389] Kernel command line: placeholder root=/dev/mapper/pinot1--vg-root ro console=hvc0 [ 0.345468] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.345690] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.345792] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.346012] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.346016] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.346019] software IO TLB: area num 4. [ 0.451950] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.454871] Dynamic Preempt: voluntary [ 0.454983] rcu: Preemptible hierarchical RCU implementation. [ 0.454985] rcu: RCU event tracing is enabled. [ 0.454986] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.454989] Trampoline variant of Tasks RCU enabled. [ 0.454990] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.454991] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.455011] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.462106] NR_IRQS: 4352, nr_irqs: 1000, preallocated irqs: 16 [ 0.462263] xen:events: Using FIFO-based ABI [ 0.462304] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.462310] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.462316] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.462328] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.462334] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.462339] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.462345] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.462351] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.462356] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.462362] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.462368] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.462374] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.462379] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.462385] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.462390] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.462401] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.468567] Console: colour VGA+ 80x25 [ 0.468572] printk: legacy console [tty0] enabled [ 0.482637] printk: legacy console [hvc0] enabled [ 0.483360] ACPI: Core revision 20240827 [ 0.487385] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.487542] Xen: using vcpuop timer interface [ 0.487549] installing Xen timer for CPU 0 [ 0.487825] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c3559aad, max_idle_ns: 440795319783 ns [ 0.487984] Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.97 BogoMIPS (lpj=2799988) [ 0.488177] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.488382] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.488492] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.488606] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.488993] Spectre V2 : Mitigation: Retpolines [ 0.489121] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.489263] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.489373] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.489482] RETBleed: Mitigation: untrained return thunk [ 0.489588] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.489732] Speculative Store Bypass: Vulnerable [ 0.489855] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.489987] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.490096] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.490205] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.490329] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.516226] Freeing SMP alternatives memory: 40K [ 0.516369] pid_max: default: 32768 minimum: 301 [ 0.516512] LSM: initializing lsm=capability,selinux [ 0.516651] SELinux: Initializing. [ 0.516974] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.517149] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.519282] cpu 0 spinlock event irq 57 [ 0.519557] VPMU disabled by hypervisor. [ 0.522630] Performance Events: PMU not available due to virtualization, using software events only. [ 0.523008] signal: max sigframe size: 1776 [ 0.523621] rcu: Hierarchical SRCU implementation. [ 0.523903] rcu: Max phase no-delay instances is 400. [ 0.524532] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.565063] smp: Bringing up secondary CPUs ... [ 0.566671] installing Xen timer for CPU 1 [ 0.568832] installing Xen timer for CPU 2 [ 0.571283] installing Xen timer for CPU 3 [ 0.026573] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0011 [ 0.572099] cpu 1 spinlock event irq 77 [ 0.026573] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0012 [ 0.573216] cpu 2 spinlock event irq 78 [ 0.026573] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0013 [ 0.574044] cpu 3 spinlock event irq 79 [ 0.574990] smp: Brought up 1 node, 4 CPUs [ 0.575176] Memory: 381932K/524284K available (16384K kernel code, 2785K rwdata, 6296K rodata, 2732K init, 1708K bss, 138300K reserved, 0K cma-reserved) [ 0.575579] devtmpfs: initialized [ 0.576239] x86/mm: Memory block size: 128MB [ 0.580191] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.580953] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.581341] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.582034] PM: RTC time: 19:40:22, date: 2024-09-29 [ 0.583132] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.583595] xen:grant_table: Grant tables using version 1 layout [ 0.584005] Grant table initialized [ 0.586194] audit: initializing netlink subsys (disabled) [ 0.586606] audit: type=2000 audit(1727638822.943:1): state=initialized audit_enabled=0 res=1 [ 0.587414] thermal_sys: Registered thermal governor 'step_wise' [ 0.587427] thermal_sys: Registered thermal governor 'user_space' [ 0.590514] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.591017] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.952028] PCI: Using configuration type 1 for base access [ 0.952328] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.954280] ACPI: Added _OSI(Module Device) [ 0.954587] ACPI: Added _OSI(Processor Device) [ 0.954587] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.954587] ACPI: Added _OSI(Processor Aggregator Device) [ 0.969765] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.970465] xen: registering gsi 9 triggering 0 polarity 1 [ 0.975440] ACPI: Interpreter enabled [ 0.975592] ACPI: PM: (supports S0 S1 S4 S5) [ 0.975696] ACPI: Using IOAPIC for interrupt routing [ 0.976130] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.976460] PCI: Using E820 reservations for host bridge windows [ 0.977704] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.996489] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.996818] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.996994] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.997110] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.997253] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.997741] PCI host bridge to bus 0000:00 [ 0.997845] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.997962] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.997986] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.998128] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.998270] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.998411] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.998573] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.999199] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.999732] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.999954] pci 0000:00:09.0: PCI bridge to [bus 01] [ 1.000000] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 1.000116] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 1.000308] pci 0000:00:09.0: enabling Extended Tags [ 1.000539] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 1.000841] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 1.001060] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 1.001179] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 1.001298] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 1.001480] pci 0000:00:0a.0: enabling Extended Tags [ 1.001740] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 1.002072] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f conventional PCI endpoint [ 1.002263] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 1.002392] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 1.002522] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 1.002689] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 1.002849] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 1.002978] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 1.003146] pci 0000:00:11.0: set SATA to AHCI mode [ 1.003473] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 1.003663] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 1.004131] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 1.004322] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 1.004737] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 1.004932] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 1.005246] pci 0000:00:12.2: supports D1 D2 [ 1.005348] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 1.005657] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 1.005854] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 1.006248] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 1.006466] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 1.006889] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 1.007030] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 1.007372] pci 0000:00:13.2: supports D1 D2 [ 1.007500] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 1.007795] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 1.008334] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 1.008524] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 1.008653] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 1.008814] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 1.008944] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 1.009009] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 1.009171] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 1.009282] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 1.009394] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 1.009527] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 1.009863] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 1.010348] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 1.010583] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 1.010714] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 1.010845] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 1.011162] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 1.011352] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 1.011768] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 1.012166] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 1.012498] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 1.012828] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 1.013189] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 1.013546] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 1.014040] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 1.014236] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 1.014402] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 1.014537] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 1.014985] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 1.017039] pci 0000:00:09.0: PCI bridge to [bus 01] [ 1.017372] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 1.017569] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 1.017776] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 1.017946] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 1.018289] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 1.018794] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 1.018976] pci_bus 0000:03: extended config space not accessible [ 1.019148] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 1.021180] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 1.021578] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 1.021987] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 1.022863] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.023308] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 1.023443] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 1.023591] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 1.023736] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 1.023884] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 1.023988] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 1.024245] pci_bus 0000:00: on NUMA node 0 [ 1.024890] xen: registering gsi 13 triggering 1 polarity 0 [ 1.025391] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 1.025603] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 1.025828] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 1.026020] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 1.026203] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 1.026384] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 1.026564] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 1.026759] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 1.027041] xen:balloon: Initialising balloon driver [ 1.027481] iommu: Default domain type: Translated [ 1.027987] iommu: DMA domain TLB invalidation policy: lazy mode [ 1.028635] SCSI subsystem initialized [ 1.029073] libata version 3.00 loaded. [ 1.029250] ACPI: bus type USB registered [ 1.029621] usbcore: registered new interface driver usbfs [ 1.030002] usbcore: registered new interface driver hub [ 1.030364] usbcore: registered new device driver usb [ 1.030740] pps_core: LinuxPPS API ver. 1 registered [ 1.030987] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.031330] PTP clock support registered [ 1.032087] Advanced Linux Sound Architecture Driver Initialized. [ 1.032487] NetLabel: Initializing [ 1.032587] NetLabel: domain hash size = 128 [ 1.032688] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.032993] NetLabel: unlabeled traffic allowed by default [ 1.033127] PCI: Using ACPI for IRQ routing [ 1.060028] PCI: pci_cache_line_size set to 64 bytes [ 1.060219] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 1.060223] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 1.061056] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 1.061133] pci 0000:03:04.0: vgaarb: bridge control possible [ 1.061257] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.061416] vgaarb: loaded [ 1.064722] clocksource: Switched to clocksource tsc-early [ 1.065550] VFS: Disk quotas dquot_6.6.0 [ 1.065693] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.066259] hugetlbfs: disabling because there are no supported hugepage sizes [ 1.066677] pnp: PnP ACPI init [ 1.068134] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 1.069095] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 1.070788] xen: registering gsi 8 triggering 1 polarity 0 [ 1.071836] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 1.072980] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.073225] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.074777] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 1.075028] system 00:05: [io 0x0550-0x0551] has been reserved [ 1.075340] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 1.075628] system 00:05: [io 0x040b] has been reserved [ 1.075911] system 00:05: [io 0x04d6] has been reserved [ 1.076194] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 1.076483] system 00:05: [io 0x0c14] has been reserved [ 1.076767] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 1.077020] system 00:05: [io 0x0c52] has been reserved [ 1.077207] system 00:05: [io 0x0c6c] has been reserved [ 1.077495] system 00:05: [io 0x0c6f] has been reserved [ 1.077772] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 1.078019] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 1.078312] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 1.078591] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 1.078900] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 1.079143] system 00:05: [io 0x0800-0x089f] has been reserved [ 1.079446] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 1.079722] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 1.080004] system 00:05: [io 0x0900-0x090f] has been reserved [ 1.080310] system 00:05: [io 0x0910-0x091f] has been reserved [ 1.080606] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 1.080891] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 1.081088] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 1.081363] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 1.082748] xen: registering gsi 4 triggering 1 polarity 0 [ 1.082773] Already setup the GSI :4 [ 1.083029] pnp 00:06: [dma 0 disabled] [ 1.084383] xen: registering gsi 3 triggering 1 polarity 0 [ 1.084431] pnp 00:07: [dma 0 disabled] [ 1.085121] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 1.086465] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 1.087009] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 1.087337] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 1.087621] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 1.087941] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 1.088866] pnp: PnP ACPI: found 10 devices [ 1.177596] PM-Timer failed consistency check (0xffffff) - aborting. [ 1.177836] NET: Registered PF_INET protocol family [ 1.178049] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.178498] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.178685] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.178829] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 1.179069] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.179339] TCP: Hash tables configured (established 4096 bind 4096) [ 1.179514] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.179632] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.179787] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.180282] RPC: Registered named UNIX socket transport module. [ 1.180580] RPC: Registered udp transport module. [ 1.180882] RPC: Registered tcp transport module. [ 1.181078] RPC: Registered tcp-with-tls transport module. [ 1.181187] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.181873] pci 0000:00:09.0: PCI bridge to [bus 01] [ 1.182086] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 1.182206] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 1.182336] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 1.182443] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 1.182560] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 1.182689] pci 0000:00:14.4: PCI bridge to [bus 03] [ 1.182812] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 1.182930] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 1.183096] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.183232] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.183341] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.183452] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 1.183564] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 1.183676] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 1.183782] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 1.183891] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 1.184010] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 1.184122] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 1.184252] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 1.184388] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 1.184497] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 1.184606] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.184718] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 1.184829] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 1.185149] xen: registering gsi 16 triggering 0 polarity 1 [ 1.185195] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.847224] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 646661 usecs [ 1.847477] xen: registering gsi 16 triggering 0 polarity 1 [ 1.847510] Already setup the GSI :16 [ 1.871274] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 23304 usecs [ 1.871542] xen: registering gsi 17 triggering 0 polarity 1 [ 1.871613] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.871825] xen: registering gsi 18 triggering 0 polarity 1 [ 1.871846] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.895242] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 22927 usecs [ 1.895558] xen: registering gsi 18 triggering 0 polarity 1 [ 1.895570] Already setup the GSI :18 [ 1.919232] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 23182 usecs [ 1.919488] xen: registering gsi 19 triggering 0 polarity 1 [ 1.919542] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.919753] xen: registering gsi 18 triggering 0 polarity 1 [ 1.919757] Already setup the GSI :18 [ 1.942243] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 22016 usecs [ 1.942462] PCI: CLS 64 bytes, default 64 [ 1.942615] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.942769] Unpacking initramfs... [ 1.942873] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 1.943343] kvm_intel: VMX not supported by CPU 2 [ 1.943451] kvm_amd: SVM not supported by CPU 2 [ 1.943558] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c3559aad, max_idle_ns: 440795319783 ns [ 1.943762] clocksource: Switched to clocksource tsc [ 1.947548] Initialise system trusted keyrings [ 1.948115] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.949524] NFS: Registering the id_resolver key type [ 1.950036] Key type id_resolver registered [ 1.950423] Key type id_legacy registered [ 1.951294] 9p: Installing v9fs 9p2000 file system support [ 1.976623] Key type asymmetric registered [ 1.976743] Asymmetric key parser 'x509' registered [ 1.976887] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.977040] io scheduler mq-deadline registered [ 1.977170] io scheduler kyber registered [ 1.977781] xen: registering gsi 53 triggering 0 polarity 1 [ 1.977814] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.978132] xen: registering gsi 54 triggering 0 polarity 1 [ 1.978151] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.978490] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.978681] ACPI: button: Power Button [PWRB] [ 1.978825] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.979061] ACPI: button: Power Button [PWRF] [ 1.983799] xen:xen_evtchn: Event-channel device installed [ 1.984047] xen_pciback: backend is vpci [ 1.984924] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.985351] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.986231] hpet_acpi_add: no address or irqs in _CRS [ 1.986416] Non-volatile memory driver v1.3 [ 1.988921] loop: module loaded [ 1.995686] ahci 0000:00:11.0: version 3.0 [ 1.995788] xen: registering gsi 22 triggering 0 polarity 1 [ 1.995816] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.995958] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.996105] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.996215] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.997482] scsi host0: ahci [ 1.997844] scsi host1: ahci [ 1.998265] scsi host2: ahci [ 1.998650] scsi host3: ahci [ 1.998802] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 4 [ 1.998947] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 4 [ 1.999091] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 4 [ 1.999248] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 4 [ 1.999825] tun: Universal TUN/TAP device driver, 1.6 [ 2.000039] e100: Intel(R) PRO/100 Network Driver [ 2.000143] e100: Copyright(c) 1999-2006 Intel Corporation [ 2.000261] sky2: driver version 1.30 [ 2.000441] xen_netfront: Initialising Xen virtual ethernet driver [ 2.000813] xen: registering gsi 16 triggering 0 polarity 1 [ 2.000821] Already setup the GSI :16 [ 2.000933] xen: registering gsi 17 triggering 0 polarity 1 [ 2.000972] Already setup the GSI :17 [ 2.001007] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 2.001273] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 2.001479] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 2.002454] xen: registering gsi 19 triggering 0 polarity 1 [ 2.002462] Already setup the GSI :19 [ 2.056721] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 2.056884] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.057024] usb usb1: Product: OHCI PCI host controller [ 2.057129] usb usb1: Manufacturer: Linux 6.11.0+ ohci_hcd [ 2.057233] usb usb1: SerialNumber: 0000:00:12.0 [ 2.057541] hub 1-0:1.0: USB hub found [ 2.057672] hub 1-0:1.0: 3 ports detected [ 2.058159] xen: registering gsi 16 triggering 0 polarity 1 [ 2.058166] Already setup the GSI :16 [ 2.058258] ehci-pci 0000:00:12.2: EHCI Host Controller [ 2.058510] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2 [ 2.058676] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.058855] ehci-pci 0000:00:12.2: debug port 1 [ 2.059092] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 2.064613] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.064799] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 2.064944] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.065084] usb usb2: Product: EHCI Host Controller [ 2.065211] usb usb2: Manufacturer: Linux 6.11.0+ ehci_hcd [ 2.065315] usb usb2: SerialNumber: 0000:00:12.2 [ 2.065611] hub 2-0:1.0: USB hub found [ 2.065722] hub 2-0:1.0: 6 ports detected [ 2.100113] Freeing initrd memory: 20944K [ 2.114742] hub 1-0:1.0: USB hub found [ 2.114864] hub 1-0:1.0: 3 ports detected [ 2.115142] ehci-pci 0000:00:13.2: EHCI Host Controller [ 2.115397] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 2.115542] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.115729] ehci-pci 0000:00:13.2: debug port 1 [ 2.115931] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 2.121625] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.121805] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 2.121949] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.122089] usb usb3: Product: EHCI Host Controller [ 2.122191] usb usb3: Manufacturer: Linux 6.11.0+ ehci_hcd [ 2.122296] usb usb3: SerialNumber: 0000:00:13.2 [ 2.122625] hub 3-0:1.0: USB hub found [ 2.122736] hub 3-0:1.0: 6 ports detected [ 2.123097] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 2.123308] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 2.123486] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 2.178757] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 2.178911] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.179050] usb usb4: Product: OHCI PCI host controller [ 2.179155] usb usb4: Manufacturer: Linux 6.11.0+ ohci_hcd [ 2.179259] usb usb4: SerialNumber: 0000:00:12.1 [ 2.179567] hub 4-0:1.0: USB hub found [ 2.179694] hub 4-0:1.0: 3 ports detected [ 2.180058] xen: registering gsi 18 triggering 0 polarity 1 [ 2.180066] Already setup the GSI :18 [ 2.180210] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.180412] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 2.180623] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 2.235770] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 2.235923] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.236062] usb usb5: Product: OHCI PCI host controller [ 2.236180] usb usb5: Manufacturer: Linux 6.11.0+ ohci_hcd [ 2.236285] usb usb5: SerialNumber: 0000:00:13.0 [ 2.236555] hub 5-0:1.0: USB hub found [ 2.236688] hub 5-0:1.0: 3 ports detected [ 2.237077] xen: registering gsi 18 triggering 0 polarity 1 [ 2.237083] Already setup the GSI :18 [ 2.237219] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 2.237395] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 2.237586] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 2.292764] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 2.292917] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.293057] usb usb6: Product: OHCI PCI host controller [ 2.293161] usb usb6: Manufacturer: Linux 6.11.0+ ohci_hcd [ 2.293266] usb usb6: SerialNumber: 0000:00:13.1 [ 2.293565] hub 6-0:1.0: USB hub found [ 2.293692] hub 6-0:1.0: 3 ports detected [ 2.294102] xen: registering gsi 18 triggering 0 polarity 1 [ 2.294110] Already setup the GSI :18 [ 2.294250] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.294522] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.294725] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 2.309660] ata3: SATA link down (SStatus 0 SControl 300) [ 2.309855] ata4: SATA link down (SStatus 0 SControl 300) [ 2.349731] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 2.349885] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.350024] usb usb7: Product: OHCI PCI host controller [ 2.350128] usb usb7: Manufacturer: Linux 6.11.0+ ohci_hcd [ 2.350232] usb usb7: SerialNumber: 0000:00:14.5 [ 2.350617] hub 7-0:1.0: USB hub found [ 2.350737] hub 7-0:1.0: 2 ports detected [ 2.351097] usbcore: registered new interface driver usblp [ 2.351228] usbcore: registered new interface driver usb-storage [ 2.351455] i8042: PNP: No PS/2 controller found. [ 2.351559] i8042: Probing ports directly. [ 2.354598] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.354734] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.355058] rtc_cmos 00:02: RTC can wake from S4 [ 2.355654] rtc_cmos 00:02: registered as rtc0 [ 2.355802] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 2.356015] device-mapper: uevent: version 1.0.3 [ 2.356212] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 2.356365] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 2.356521] hid: raw HID events driver (C) Jiri Kosina [ 2.356840] usbcore: registered new interface driver usbhid [ 2.356946] usbhid: USB HID core driver [ 2.357552] Initializing XFRM netlink socket [ 2.357681] NET: Registered PF_INET6 protocol family [ 2.358424] Segment Routing with IPv6 [ 2.358540] In-situ OAM (IOAM) with IPv6 [ 2.358725] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.358987] NET: Registered PF_PACKET protocol family [ 2.359119] 9pnet: Installing 9P2000 support [ 2.359236] Key type dns_resolver registered [ 2.359351] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 2.360007] IPI shorthand broadcast: enabled [ 2.364599] sched_clock: Marking stable (2339008850, 25573968)->(2391056526, -26473708) [ 2.365139] registered taskstats version 1 [ 2.365241] Loading compiled-in X.509 certificates [ 2.367436] PM: Magic number: 8:348:699 [ 2.367606] printk: legacy console [netcon0] enabled [ 2.367711] netconsole: network logging started [ 2.367956] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.378659] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.379058] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 2.381368] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 2.381570] ALSA device list: [ 2.381715] No soundcards found. [ 2.463644] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.463782] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.464384] ata2.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133 [ 2.464908] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.465240] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 2.465687] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.465998] ata2.00: configured for UDMA/133 [ 2.467308] ata1.00: configured for UDMA/133 [ 2.477699] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.478263] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.478318] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.478541] sd 0:0:0:0: [sda] Write Protect is off [ 2.478663] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5 [ 2.478665] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.478691] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.479002] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.479165] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.479176] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.479481] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 2.479630] sd 1:0:0:0: [sdb] Write Protect is off [ 2.479737] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.479761] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.479947] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 2.508185] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.524553] sdb: sdb1 sdb2 < sdb5 > [ 2.524974] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.526690] Freeing unused kernel image (initmem) memory: 2732K [ 2.526826] Write protecting the kernel read-only data: 24576k [ 2.539567] Freeing unused kernel image (rodata/data gap) memory: 1896K [ 2.657634] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.657789] Run /init as init process [ 2.657898] with arguments: [ 2.657900] /init [ 2.657902] placeholder [ 2.657904] with environment: [ 2.657905] HOME=/ [ 2.657906] TERM=linux [ 2.708619] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.870765] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.870926] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.871040] usb 6-2: Product: Hermon USB hidmouse Device [ 2.871145] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.877176] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.877625] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.881259] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.921155] e1000e: Intel(R) PRO/1000 Network Driver [ 2.921280] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.921530] xen: registering gsi 48 triggering 0 polarity 1 [ 2.922153] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.922395] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.960836] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.969607] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 3.012588] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e9:2a [ 3.012746] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.012936] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 3.013177] xen: registering gsi 47 triggering 0 polarity 1 [ 3.013204] xen: --> pirq=47 -> irq=47 (gsi=47) [ 3.013405] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.050629] random: crng init done [ 3.059758] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 3.103688] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e9:2b [ 3.103840] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 3.104031] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 3.106114] e1000e 0000:02:00.0 enx002590aee92b: renamed from eth1 [ 3.107123] e1000e 0000:01:00.0 enx002590aee92a: renamed from eth0 [ 3.826796] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.841110] EXT4-fs (dm-0): mounted filesystem 84bed97f-be2b-47ed-bb92-ce62805b7334 ro with ordered data mode. Quota mode: none. [ 7.799646] EXT4-fs (dm-0): re-mounted 84bed97f-be2b-47ed-bb92-ce62805b7334 r/w. Quota mode: none. [ 9.017927] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem [ 9.050409] EXT4-fs (sdb1): mounted filesystem e315ff3f-9b92-4b68-aa42-6789ad855d7c r/w with ordered data mode. Quota mode: none. [ 9.148461] Adding 1949692k swap on /dev/mapper/pinot1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 10.668838] xenbr0: port 1(enx002590aee92a) entered blocking state [ 10.669017] xenbr0: port 1(enx002590aee92a) entered disabled state [ 10.669135] e1000e 0000:01:00.0 enx002590aee92a: entered allmulticast mode [ 10.669291] e1000e 0000:01:00.0 enx002590aee92a: entered promiscuous mode [ 13.823622] e1000e 0000:01:00.0 enx002590aee92a: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 13.823994] xenbr0: port 1(enx002590aee92a) entered blocking state [ 13.824141] xenbr0: port 1(enx002590aee92a) entered forwarding state