[ 0.000000] Linux version 6.1.111+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Mon Sep 30 02:21:05 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000459] tsc: Detected 2199.996 MHz processor [ 0.000896] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000899] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000906] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000908] Disabled [ 0.000909] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000913] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000952] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027679] RAMDISK: [mem 0x04000000-0x05423fff] [ 0.027688] ACPI: Early table checksum verification disabled [ 0.028287] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028299] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028336] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028384] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028400] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028416] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028432] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028448] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028464] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028480] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028496] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028512] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028528] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028544] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028560] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028576] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028592] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028613] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028629] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028645] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028661] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028677] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028685] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028687] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028688] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028689] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028690] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028691] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028692] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028693] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028694] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028695] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028696] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028697] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028698] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028699] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028700] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028701] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028702] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028703] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028704] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028705] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028750] Setting APIC routing to Xen PV. [ 0.032702] Zone ranges: [ 0.032703] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032705] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032707] Normal empty [ 0.032708] Movable zone start for each node [ 0.032709] Early memory node ranges [ 0.032709] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032711] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032713] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032718] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032754] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034315] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034320] p2m virtual area at (____ptrval____), size is 40000000 [ 0.222047] Remapped 102 page(s) [ 0.223421] ACPI: PM-Timer IO Port: 0x408 [ 0.223473] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223476] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223478] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223479] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223481] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223482] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223484] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223485] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223513] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223526] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223529] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223555] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223560] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223629] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223644] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223646] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223647] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223649] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223654] Booting kernel on Xen [ 0.223654] Xen version: 4.20-unstable (preserve-AD) [ 0.223658] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229918] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.230201] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.230207] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.230211] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230289] xen: PV spinlocks enabled [ 0.230292] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230297] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230300] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230336] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230346] random: crng init done [ 0.230395] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230420] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231736] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231739] software IO TLB: area num 8. [ 0.291074] Memory: 389292K/524284K available (14349K kernel code, 2686K rwdata, 4584K rodata, 1580K init, 1288K bss, 134740K reserved, 0K cma-reserved) [ 0.291245] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.293734] Dynamic Preempt: voluntary [ 0.293833] rcu: Preemptible hierarchical RCU implementation. [ 0.293834] rcu: RCU event tracing is enabled. [ 0.293835] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.293837] Trampoline variant of Tasks RCU enabled. [ 0.293838] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.293839] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.304323] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.304447] xen:events: Using FIFO-based ABI [ 0.304470] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.304479] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.304486] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.304494] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.304501] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.304508] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.304516] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.304523] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.304530] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.304538] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.304545] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.304553] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.304560] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.304569] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.304577] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.304588] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.309933] Console: colour VGA+ 80x25 [ 0.324576] printk: console [tty0] enabled [ 0.325897] printk: console [hvc0] enabled [ 0.326037] ACPI: Core revision 20220331 [ 0.341545] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.341709] Xen: using vcpuop timer interface [ 0.341717] installing Xen timer for CPU 0 [ 0.341866] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.342024] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199996) [ 0.342350] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.342466] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.342593] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.342741] Spectre V2 : Mitigation: Retpolines [ 0.342853] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.343186] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.343304] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.343424] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.343571] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.343688] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.343839] MDS: Mitigation: Clear CPU buffers [ 0.343951] TAA: Mitigation: Clear CPU buffers [ 0.344028] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.344193] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.344337] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.344462] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.344580] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.344699] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.362367] Freeing SMP alternatives memory: 40K [ 0.362492] pid_max: default: 32768 minimum: 301 [ 0.363045] LSM: Security Framework initializing [ 0.363167] SELinux: Initializing. [ 0.363305] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363454] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364115] cpu 0 spinlock event irq 25 [ 0.364235] VPMU disabled by hypervisor. [ 0.364672] cblist_init_generic: Setting adjustable number of callback queues. [ 0.364817] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.364975] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.365029] signal: max sigframe size: 1776 [ 0.365191] rcu: Hierarchical SRCU implementation. [ 0.365317] rcu: Max phase no-delay instances is 400. [ 0.365801] smp: Bringing up secondary CPUs ... [ 0.366137] installing Xen timer for CPU 1 [ 0.366601] cpu 1 spinlock event irq 35 [ 0.367164] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.367331] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.367517] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.368249] installing Xen timer for CPU 2 [ 0.368716] cpu 2 spinlock event irq 41 [ 0.369116] installing Xen timer for CPU 3 [ 0.369568] cpu 3 spinlock event irq 47 [ 0.369568] installing Xen timer for CPU 4 [ 0.370390] cpu 4 spinlock event irq 53 [ 0.370390] installing Xen timer for CPU 5 [ 0.371179] cpu 5 spinlock event irq 59 [ 0.371233] installing Xen timer for CPU 6 [ 0.372064] cpu 6 spinlock event irq 65 [ 0.372286] installing Xen timer for CPU 7 [ 0.372738] cpu 7 spinlock event irq 71 [ 0.373254] smp: Brought up 1 node, 8 CPUs [ 0.373380] smpboot: Max logical packages: 1 [ 0.373598] devtmpfs: initialized [ 0.373598] x86/mm: Memory block size: 128MB [ 0.374255] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.374294] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.374452] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.375028] PM: RTC time: 03:50:41, date: 2024-09-30 [ 0.375274] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.375420] xen:grant_table: Grant tables using version 1 layout [ 0.375556] Grant table initialized [ 0.375859] audit: initializing netlink subsys (disabled) [ 0.376045] audit: type=2000 audit(1727668242.174:1): state=initialized audit_enabled=0 res=1 [ 0.376096] thermal_sys: Registered thermal governor 'step_wise' [ 0.376096] thermal_sys: Registered thermal governor 'user_space' [ 0.376248] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.376681] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.377032] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.505993] PCI: Using configuration type 1 for base access [ 0.508556] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.509104] ACPI: Added _OSI(Module Device) [ 0.509196] ACPI: Added _OSI(Processor Device) [ 0.509309] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.509421] ACPI: Added _OSI(Processor Aggregator Device) [ 0.539629] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.541615] xen: registering gsi 9 triggering 0 polarity 0 [ 0.544414] ACPI: Dynamic OEM Table Load: [ 0.552244] ACPI: Interpreter enabled [ 0.552377] ACPI: PM: (supports S0 S4 S5) [ 0.552488] ACPI: Using IOAPIC for interrupt routing [ 0.552632] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.552781] PCI: Using E820 reservations for host bridge windows [ 0.553362] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.578461] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.578590] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.578833] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.579101] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.579221] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.579394] PCI host bridge to bus 0000:ff [ 0.579506] pci_bus 0000:ff: root bus resource [bus ff] [ 0.579698] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.580146] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.580571] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.580992] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.581349] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.581774] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.582198] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.582621] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.583072] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.583507] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.583927] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.584330] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.584754] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.585177] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.585612] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.586035] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.586456] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.586923] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.587163] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.587620] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.588094] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.588558] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.589022] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.589491] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.589957] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.590366] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.590787] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.591222] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.591686] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.592154] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.592619] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.593079] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.593503] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.593925] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.594332] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.594762] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.595231] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.595695] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.596160] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.596678] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.597104] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.597525] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.597950] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.598158] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.598593] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.599018] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.599448] pci_bus 0000:ff: on NUMA node 0 [ 0.603711] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.603838] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.604117] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.604459] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.604577] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.605059] PCI host bridge to bus 0000:00 [ 0.605173] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.605293] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.605413] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.605556] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.605699] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.605876] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.606514] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.606514] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.606514] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.606924] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.607022] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.607022] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.608177] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.608691] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.609066] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.609594] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.609957] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.610426] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.610799] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.611376] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.611995] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.612572] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.612789] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.613253] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.613597] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.613814] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.614273] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.614601] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.614818] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.615283] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.615641] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.615837] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.616374] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.616689] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.617236] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.617441] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.617562] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.625194] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.625751] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.625945] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.626035] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.626323] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.626876] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.627071] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.627192] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.627474] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.628028] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.628227] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.628347] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.628668] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.628864] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.629398] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.629724] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.630471] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.630663] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.630821] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.631004] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.631068] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.631225] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.631381] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.631691] pci 0000:00:1f.2: PME# supported from D3hot [ 0.631971] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.632127] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.632371] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.632748] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.632965] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.633622] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.633917] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.634244] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.634455] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.635205] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.635417] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.636125] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.636337] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.637040] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.637252] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.637945] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.638045] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.638384] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.638595] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.638878] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.639062] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.639410] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.639630] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.639750] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.639952] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.640027] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.640603] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.640815] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.641101] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.641284] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.641630] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.641832] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.641952] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.642077] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.642197] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.642749] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.642891] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.643031] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.643319] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.643610] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.643970] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.644026] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.644241] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.644457] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.644621] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.645150] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.645629] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.645754] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.645881] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.646233] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.646351] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.646557] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.646772] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.646939] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.647437] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.647895] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.648020] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.648145] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.648489] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.648879] pci 0000:09:00.0: enabling Extended Tags [ 0.649217] pci 0000:09:00.0: supports D1 D2 [ 0.649329] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.649698] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.649824] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.649951] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.650208] pci_bus 0000:0a: extended config space not accessible [ 0.650378] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.650582] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.650748] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.650914] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.651263] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.651551] pci 0000:0a:00.0: supports D1 D2 [ 0.651663] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.652100] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.652238] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.652374] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.652760] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.652958] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.653116] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.653276] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.653791] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.654022] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.654027] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.654244] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.654387] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.654944] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.655108] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.655316] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.655476] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.655985] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.656139] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.656302] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.656518] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.656661] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.657182] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.657381] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.657595] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.657755] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.658267] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.658495] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.658638] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.658854] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.659001] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.659388] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.659588] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.659796] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.659956] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.660422] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.660650] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.660793] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.661008] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.661026] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.661603] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.661728] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.661855] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.661994] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.663375] pci_bus 0000:00: on NUMA node 0 [ 0.663470] xen: registering gsi 13 triggering 1 polarity 0 [ 0.663470] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.663643] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.663832] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.664019] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.664022] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.664022] ACPI: PCI: Interrupt link LNKE disabled [ 0.664022] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.664022] ACPI: PCI: Interrupt link LNKF disabled [ 0.664022] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.664022] ACPI: PCI: Interrupt link LNKG disabled [ 0.665100] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.665217] ACPI: PCI: Interrupt link LNKH disabled [ 0.665479] xen:balloon: Initialising balloon driver [ 0.666119] iommu: Default domain type: Translated [ 0.674029] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.674213] SCSI subsystem initialized [ 0.674339] libata version 3.00 loaded. [ 0.674339] ACPI: bus type USB registered [ 0.674339] usbcore: registered new interface driver usbfs [ 0.674339] usbcore: registered new interface driver hub [ 0.674433] usbcore: registered new device driver usb [ 0.674558] pps_core: LinuxPPS API ver. 1 registered [ 0.675028] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.675178] PTP clock support registered [ 0.675312] Advanced Linux Sound Architecture Driver Initialized. [ 0.675324] NetLabel: Initializing [ 0.675435] NetLabel: domain hash size = 128 [ 0.675546] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.676045] NetLabel: unlabeled traffic allowed by default [ 0.676183] PCI: Using ACPI for IRQ routing [ 0.710535] PCI: pci_cache_line_size set to 64 bytes [ 0.711313] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.711316] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.712064] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.712185] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.712301] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.712449] vgaarb: loaded [ 0.714026] clocksource: Switched to clocksource tsc-early [ 0.714062] VFS: Disk quotas dquot_6.6.0 [ 0.714401] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.714546] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.714701] pnp: PnP ACPI init [ 0.715185] xen: registering gsi 8 triggering 1 polarity 0 [ 0.715380] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.715506] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.715624] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.715741] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.715858] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.715976] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.716119] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.716242] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.716361] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.716480] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.716605] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.716724] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.716843] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.717276] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.717400] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.717517] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.717634] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.717751] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.718199] xen: registering gsi 4 triggering 1 polarity 0 [ 0.718205] Already setup the GSI :4 [ 0.718317] pnp 00:03: [dma 0 disabled] [ 0.718628] xen: registering gsi 3 triggering 1 polarity 0 [ 0.718641] pnp 00:04: [dma 0 disabled] [ 0.719245] pnp: PnP ACPI: found 5 devices [ 0.750563] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.750719] NET: Registered PF_INET protocol family [ 0.750878] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.751284] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.751436] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.751581] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.751731] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.751899] TCP: Hash tables configured (established 4096 bind 4096) [ 0.752087] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.752249] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.752404] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.752812] RPC: Registered named UNIX socket transport module. [ 0.752938] RPC: Registered udp transport module. [ 0.753068] RPC: Registered tcp transport module. [ 0.753195] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.753761] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.753936] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.754139] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.754303] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.754449] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.754623] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.754796] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.754929] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.755120] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.755246] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.755395] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.755537] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.755680] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.755802] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.755945] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.756114] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.756263] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.756384] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.756528] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.756670] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.756816] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.756937] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.757089] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.757232] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.757376] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.757509] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.757641] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.757811] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.757983] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.758181] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.758302] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.758440] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.758601] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.758719] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.758856] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.759017] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.759158] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.759301] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.759465] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.759590] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.759727] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.759891] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.760061] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.760232] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.760386] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.760537] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.760689] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.760840] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.760995] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.761162] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.761281] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.761419] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.761552] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.761724] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.761872] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.761990] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.762130] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.762255] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.762397] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.762516] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.762634] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.762777] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.762892] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.763010] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.763145] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.763265] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.763381] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.763504] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.763619] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.763743] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.763858] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.763976] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.764541] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.764761] xen: registering gsi 19 triggering 0 polarity 1 [ 0.764789] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.773551] xen: registering gsi 18 triggering 0 polarity 1 [ 0.773570] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.789270] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 15408 usecs [ 0.789512] xen: registering gsi 18 triggering 0 polarity 1 [ 0.789518] Already setup the GSI :18 [ 0.805375] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 15545 usecs [ 0.805588] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.805765] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.805842] Unpacking initramfs... [ 0.805913] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.806269] kvm: no hardware support for 'kvm_intel' [ 0.814030] has_svm: not amd or hygon [ 0.814192] kvm: no hardware support for 'kvm_amd' [ 0.814310] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.814732] clocksource: Switched to clocksource tsc [ 0.817399] Initialise system trusted keyrings [ 0.817679] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.819212] NFS: Registering the id_resolver key type [ 0.819341] Key type id_resolver registered [ 0.819464] Key type id_legacy registered [ 0.819670] 9p: Installing v9fs 9p2000 file system support [ 0.833862] Key type asymmetric registered [ 0.833989] Asymmetric key parser 'x509' registered [ 0.834125] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.834281] io scheduler mq-deadline registered [ 0.834394] io scheduler kyber registered [ 0.835357] xen: registering gsi 16 triggering 0 polarity 1 [ 0.835387] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.835940] xen: registering gsi 16 triggering 0 polarity 1 [ 0.835946] Already setup the GSI :16 [ 0.836612] xen: registering gsi 16 triggering 0 polarity 1 [ 0.836617] Already setup the GSI :16 [ 0.836938] xen: registering gsi 16 triggering 0 polarity 1 [ 0.836942] Already setup the GSI :16 [ 0.837260] xen: registering gsi 16 triggering 0 polarity 1 [ 0.837263] Already setup the GSI :16 [ 0.837879] xen: registering gsi 16 triggering 0 polarity 1 [ 0.837884] Already setup the GSI :16 [ 0.838468] xen: registering gsi 16 triggering 0 polarity 1 [ 0.838473] Already setup the GSI :16 [ 0.838912] xen: registering gsi 17 triggering 0 polarity 1 [ 0.838929] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.839287] xen: registering gsi 19 triggering 0 polarity 1 [ 0.839292] Already setup the GSI :19 [ 0.839742] xen: registering gsi 16 triggering 0 polarity 1 [ 0.839747] Already setup the GSI :16 [ 0.840405] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.840622] ACPI: button: Power Button [PWRB] [ 0.840768] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.841013] ACPI: button: Power Button [PWRF] [ 0.841297] Monitor-Mwait will be used to enter C-1 state [ 0.841334] Monitor-Mwait will be used to enter C-2 state [ 0.841351] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.841765] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.847611] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.848240] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.848767] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.849144] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.849486] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.849849] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.850668] xen:xen_evtchn: Event-channel device installed [ 0.850861] xen_pciback: backend is vpci [ 0.851615] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.851924] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.852664] hpet_acpi_add: no address or irqs in _CRS [ 0.852876] Non-volatile memory driver v1.3 [ 0.852996] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.855590] loop: module loaded [ 0.862043] ahci 0000:00:1f.2: version 3.0 [ 0.862146] xen: registering gsi 16 triggering 0 polarity 1 [ 0.862156] Already setup the GSI :16 [ 0.862499] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.862680] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.878074] scsi host0: ahci [ 0.878534] scsi host1: ahci [ 0.878935] scsi host2: ahci [ 0.879328] scsi host3: ahci [ 0.879684] scsi host4: ahci [ 0.879991] scsi host5: ahci [ 0.880133] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 74 [ 0.880278] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 74 [ 0.880422] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 74 [ 0.880579] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 74 [ 0.880744] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 74 [ 0.880888] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 74 [ 0.881330] tun: Universal TUN/TAP device driver, 1.6 [ 0.881571] e100: Intel(R) PRO/100 Network Driver [ 0.881687] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.881824] sky2: driver version 1.30 [ 0.882010] xen_netfront: Initialising Xen virtual ethernet driver [ 0.882395] xen: registering gsi 18 triggering 0 polarity 1 [ 0.882404] Already setup the GSI :18 [ 0.882629] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.882823] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.882998] ehci-pci 0000:00:1a.0: debug port 2 [ 0.887142] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.893471] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.893744] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.893892] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.894035] usb usb1: Product: EHCI Host Controller [ 0.894149] usb usb1: Manufacturer: Linux 6.1.111+ ehci_hcd [ 0.894264] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.894575] hub 1-0:1.0: USB hub found [ 0.894700] hub 1-0:1.0: 2 ports detected [ 0.895062] xen: registering gsi 18 triggering 0 polarity 1 [ 0.895070] Already setup the GSI :18 [ 0.895261] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.895500] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.895675] ehci-pci 0000:00:1d.0: debug port 2 [ 0.899763] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.906484] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.906717] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.906864] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.907040] usb usb2: Product: EHCI Host Controller [ 0.907154] usb usb2: Manufacturer: Linux 6.1.111+ ehci_hcd [ 0.907284] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.907564] hub 2-0:1.0: USB hub found [ 0.907688] hub 2-0:1.0: 2 ports detected [ 0.908115] xen: registering gsi 19 triggering 0 polarity 1 [ 0.908124] Already setup the GSI :19 [ 0.908323] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.908540] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.909780] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.910347] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.910571] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.910720] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.910934] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.911083] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.911252] usb usb3: Product: xHCI Host Controller [ 0.911368] usb usb3: Manufacturer: Linux 6.1.111+ xhci-hcd [ 0.911502] usb usb3: SerialNumber: 0000:00:14.0 [ 0.911800] Freeing initrd memory: 20624K [ 0.911838] hub 3-0:1.0: USB hub found [ 0.912056] hub 3-0:1.0: 8 ports detected [ 0.913222] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.913371] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.913525] usb usb4: Product: xHCI Host Controller [ 0.913639] usb usb4: Manufacturer: Linux 6.1.111+ xhci-hcd [ 0.913754] usb usb4: SerialNumber: 0000:00:14.0 [ 0.914020] hub 4-0:1.0: USB hub found [ 0.914151] hub 4-0:1.0: 6 ports detected [ 0.915251] usbcore: registered new interface driver usblp [ 0.915410] usbcore: registered new interface driver usb-storage [ 0.915643] i8042: PNP: No PS/2 controller found. [ 0.915946] rtc_cmos 00:00: RTC can wake from S4 [ 0.916576] rtc_cmos 00:00: registered as rtc0 [ 0.916751] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.916952] device-mapper: uevent: version 1.0.3 [ 0.917043] xen: registering gsi 18 triggering 0 polarity 1 [ 0.917075] Already setup the GSI :18 [ 0.917187] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.917192] intel_pstate: CPU model not supported [ 0.917234] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.917353] hid: raw HID events driver (C) Jiri Kosina [ 0.917497] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.917715] usbcore: registered new interface driver usbhid [ 0.917927] usbhid: USB HID core driver [ 0.918247] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.918645] Initializing XFRM netlink socket [ 0.918902] NET: Registered PF_INET6 protocol family [ 0.919477] Segment Routing with IPv6 [ 0.919633] In-situ OAM (IOAM) with IPv6 [ 0.919777] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.920013] NET: Registered PF_PACKET protocol family [ 0.920164] 9pnet: Installing 9P2000 support [ 0.920288] Key type dns_resolver registered [ 0.921025] IPI shorthand broadcast: enabled [ 0.921163] sched_clock: Marking stable (883553235, 37432089)->(1767686948, -846701624) [ 0.921741] registered taskstats version 1 [ 0.921857] Loading compiled-in X.509 certificates [ 0.924452] PM: Magic number: 8:377:817 [ 0.924630] acpi device:a6: hash matches [ 0.924794] printk: console [netcon0] enabled [ 0.924907] netconsole: network logging started [ 0.925271] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.936895] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.937233] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.937536] ALSA device list: [ 0.937665] No soundcards found. [ 0.937915] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 1.135537] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.143521] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.151551] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.188785] ata4: SATA link down (SStatus 0 SControl 300) [ 1.189016] ata5: SATA link down (SStatus 0 SControl 300) [ 1.189176] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.189318] ata2: SATA link down (SStatus 0 SControl 300) [ 1.189494] ata1: SATA link down (SStatus 0 SControl 300) [ 1.189636] ata6: SATA link down (SStatus 0 SControl 300) [ 1.190562] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.263823] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.263977] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.264351] hub 1-1:1.0: USB hub found [ 1.264573] hub 1-1:1.0: 4 ports detected [ 1.272075] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.272229] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.272602] hub 2-1:1.0: USB hub found [ 1.272827] hub 2-1:1.0: 4 ports detected [ 1.274455] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.274619] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.279184] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.279340] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.279481] usb 3-3: Product: USB2.0 Hub [ 1.280324] hub 3-3:1.0: USB hub found [ 1.280863] hub 3-3:1.0: 4 ports detected [ 1.302391] ata3.00: configured for UDMA/133 [ 1.302818] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.303411] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.303524] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.303756] sd 2:0:0:0: [sda] Write Protect is off [ 1.303888] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.303960] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.304199] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.323477] sda: sda1 sda2 < sda5 > [ 1.323973] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.325220] Freeing unused kernel image (initmem) memory: 1580K [ 1.325348] Write protecting the kernel read-only data: 22528k [ 1.343387] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.344716] Freeing unused kernel image (rodata/data gap) memory: 1560K [ 1.397481] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.523749] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.523901] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.524621] hub 3-4:1.0: USB hub found [ 1.524836] hub 3-4:1.0: 4 ports detected [ 1.587500] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.664972] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.665126] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.665269] usb 3-3.2: Product: USB2.0 Hub [ 1.665954] hub 3-3.2:1.0: USB hub found [ 1.666421] hub 3-3.2:1.0: 4 ports detected [ 1.805592] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.805718] Run /init as init process [ 1.805828] with arguments: [ 1.805829] /init [ 1.805830] placeholder [ 1.805831] with environment: [ 1.805832] HOME=/ [ 1.805833] TERM=linux [ 1.818475] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.922874] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.923034] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.928896] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 2.244511] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.244701] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.245144] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.245369] xen: registering gsi 16 triggering 0 polarity 1 [ 2.245378] Already setup the GSI :16 [ 2.250507] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.250667] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.250963] xen: registering gsi 16 triggering 0 polarity 1 [ 2.250974] Already setup the GSI :16 [ 2.267685] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 2.268974] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 2.269313] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.277999] pps pps0: new PPS source ptp0 [ 2.278202] igb 0000:07:00.0: added PHC on eth0 [ 2.278336] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.278481] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.278656] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.278770] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.279009] xen: registering gsi 17 triggering 0 polarity 1 [ 2.279018] Already setup the GSI :17 [ 2.308568] pps pps1: new PPS source ptp1 [ 2.308757] igb 0000:08:00.0: added PHC on eth1 [ 2.308890] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.309016] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.309180] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.309295] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.309535] xen: registering gsi 16 triggering 0 polarity 1 [ 2.309542] Already setup the GSI :16 [ 2.367371] igb 0000:0b:00.0: added PHC on eth2 [ 2.367523] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.367645] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.367847] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.367962] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.368191] xen: registering gsi 17 triggering 0 polarity 1 [ 2.368200] Already setup the GSI :17 [ 2.425462] igb 0000:0b:00.1: added PHC on eth3 [ 2.425601] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.425722] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.425924] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.426039] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.426273] xen: registering gsi 18 triggering 0 polarity 1 [ 2.426282] Already setup the GSI :18 [ 2.484075] igb 0000:0b:00.2: added PHC on eth4 [ 2.484239] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.484375] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.484626] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.484756] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.485000] xen: registering gsi 19 triggering 0 polarity 1 [ 2.485009] Already setup the GSI :19 [ 2.540366] igb 0000:0b:00.3: added PHC on eth5 [ 2.540551] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.540678] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.540881] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.540996] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.544676] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.551995] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.563774] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.571708] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.582031] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.592728] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 2.984659] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.120409] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.120661] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.411539] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.411858] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.412076] xen: registering gsi 17 triggering 0 polarity 1 [ 3.412086] Already setup the GSI :17 [ 4.152673] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.284498] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.284659] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.579483] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.581924] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 4.593996] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.999535] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.007971] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.669647] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.808070] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.835525] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.914020] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.435424] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.435628] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.435807] device enx0cc47a9f87be entered promiscuous mode [ 14.980040] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 15.085795] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 15.086052] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 15.086174] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 15.086477] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready