[ 0.000000] microcode: microcode updated early to revision 0x42e, date = 2019-03-14 [ 0.000000] Linux version 6.1.0-25-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.106-3 (2024-08-26) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007de2bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1799.919 MHz processor [ 0.000921] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000926] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000936] last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.001077] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001726] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved [ 0.001735] last_pfn = 0x7de2c max_arch_pfn = 0x400000000 [ 0.018543] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] [ 0.018569] Using GB pages for direct mapping [ 0.019017] RAMDISK: [mem 0x3310b000-0x3587cfff] [ 0.019026] ACPI: Early table checksum verification disabled [ 0.019030] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.019036] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019045] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019053] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.019059] ACPI: FACS 0x000000007E1D8080 000040 [ 0.019064] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.019069] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.019074] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.019079] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.019084] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.019089] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.019095] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.019100] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.019105] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.019111] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.019116] ACPI: DMAR 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.019121] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.019125] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.019127] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.019129] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.019130] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.019132] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.019133] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.019135] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.019136] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.019137] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.019139] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.019140] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.019141] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.019143] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.019144] ACPI: Reserving DMAR table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.019145] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.019215] No NUMA configuration found [ 0.019217] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] [ 0.019233] NODE_DATA(0) allocated [mem 0x27ffd5000-0x27fffffff] [ 0.019693] Zone ranges: [ 0.019694] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.019697] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.019700] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.019702] Device empty [ 0.019703] Movable zone start for each node [ 0.019708] Early memory node ranges [ 0.019708] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.019711] node 0: [mem 0x0000000000100000-0x000000007de2bfff] [ 0.019713] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.019716] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.019724] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.019782] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.028014] On node 0, zone Normal: 8660 pages in unavailable ranges [ 0.028308] ACPI: PM-Timer IO Port: 0x408 [ 0.028321] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.028323] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.028325] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.028326] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.028339] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.028345] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.028348] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028352] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.028359] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028360] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.028367] TSC deadline timer available [ 0.028368] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.028389] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028392] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.028394] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.028395] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.028396] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.028399] PM: hibernation: Registered nosave memory: [mem 0x7de2c000-0x7debafff] [ 0.028400] PM: hibernation: Registered nosave memory: [mem 0x7debb000-0x7dfc3fff] [ 0.028401] PM: hibernation: Registered nosave memory: [mem 0x7dfc4000-0x7e1e0fff] [ 0.028403] PM: hibernation: Registered nosave memory: [mem 0x7e1e1000-0x7f36afff] [ 0.028404] PM: hibernation: Registered nosave memory: [mem 0x7f36b000-0x7f7fffff] [ 0.028405] PM: hibernation: Registered nosave memory: [mem 0x7f800000-0x7fffffff] [ 0.028406] PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff] [ 0.028408] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.028409] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff] [ 0.028410] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff] [ 0.028411] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.028414] [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.028415] Booting paravirtualized kernel on bare hardware [ 0.028418] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.035713] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.036109] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.036118] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.036122] pcpu-alloc: [0] 0 1 2 3 [ 0.036161] Fallback order for Node 0: 0 [ 0.036166] Built 1 zonelists, mobility grouping on. Total pages: 2055603 [ 0.036168] Policy zone: Normal [ 0.036170] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.036239] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64", will be passed to user space. [ 0.036253] random: crng init done [ 0.037299] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.037867] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.037955] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.037968] software IO TLB: area num 4. [ 0.079656] Memory: 2086372K/8353556K available (14342K kernel code, 2335K rwdata, 9072K rodata, 2796K init, 17396K bss, 305204K reserved, 0K cma-reserved) [ 0.079868] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.079890] Kernel/User page tables isolation: enabled [ 0.079944] ftrace: allocating 40246 entries in 158 pages [ 0.090296] ftrace: allocated 158 pages with 5 groups [ 0.091241] Dynamic Preempt: voluntary [ 0.091285] rcu: Preemptible hierarchical RCU implementation. [ 0.091286] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.091289] Trampoline variant of Tasks RCU enabled. [ 0.091289] Rude variant of Tasks RCU enabled. [ 0.091290] Tracing variant of Tasks RCU enabled. [ 0.091291] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.091292] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.098766] NR_IRQS: 524544, nr_irqs: 864, preallocated irqs: 16 [ 0.098972] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.103451] Console: colour VGA+ 80x25 [ 1.027955] printk: console [ttyS0] enabled [ 1.032160] ACPI: Core revision 20220331 [ 1.036813] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 1.045950] APIC: Switch to symmetric I/O mode setup [ 1.050931] DMAR: Host address width 46 [ 1.054780] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 1.060108] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de [ 1.068030] DMAR: RMRR base: 0x0000007de91000 end: 0x0000007de9dfff [ 1.074305] DMAR: ATSR flags: 0x0 [ 1.077615] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 1.083883] DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0 [ 1.090243] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0 [ 1.096595] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 1.101997] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 1.111136] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 1.116533] x2apic enabled [ 1.119260] Switched APIC routing to cluster x2apic. [ 1.124767] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.149954] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f1dd12156, max_idle_ns: 440795245208 ns [ 1.160471] Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.83 BogoMIPS (lpj=7199676) [ 1.164502] CPU0: Thermal monitoring enabled (TM1) [ 1.168554] process: using mwait in idle threads [ 1.172471] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 1.176469] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 1.180472] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.184470] Spectre V2 : Mitigation: Retpolines [ 1.188469] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.192469] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.196469] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 1.200470] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.204470] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 1.208470] MDS: Mitigation: Clear CPU buffers [ 1.212469] MMIO Stale Data: Unknown: No mitigations [ 1.216475] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.220469] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.224469] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.228469] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.232469] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.261024] Freeing SMP alternatives memory: 36K [ 1.264470] pid_max: default: 32768 minimum: 301 [ 1.268503] LSM: Security Framework initializing [ 1.272488] landlock: Up and running. [ 1.276469] Yama: disabled by default; enable with sysctl kernel.yama.* [ 1.280500] AppArmor: AppArmor initialized [ 1.284471] TOMOYO Linux initialized [ 1.288476] LSM support for eBPF active [ 1.292515] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.296485] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.305020] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2403 v2 @ 1.80GHz (family: 0x6, model: 0x3e, stepping: 0x4) [ 1.308658] cblist_init_generic: Setting adjustable number of callback queues. [ 1.312470] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.316500] cblist_init_generic: Setting adjustable number of callback queues. [ 1.320470] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.324493] cblist_init_generic: Setting adjustable number of callback queues. [ 1.328470] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.332491] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 1.336471] ... version: 3 [ 1.340469] ... bit width: 48 [ 1.344469] ... generic registers: 8 [ 1.348469] ... value mask: 0000ffffffffffff [ 1.352469] ... max period: 00007fffffffffff [ 1.356469] ... fixed-purpose events: 3 [ 1.360469] ... event mask: 00000007000000ff [ 1.364704] signal: max sigframe size: 1776 [ 1.368494] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 1.372501] rcu: Hierarchical SRCU implementation. [ 1.376470] rcu: Max phase no-delay instances is 1000. [ 1.381143] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.384564] smp: Bringing up secondary CPUs ... [ 1.388619] x86: Booting SMP configuration: [ 1.392475] .... node #0, CPUs: #1 #2 #3 [ 1.407828] smp: Brought up 1 node, 4 CPUs [ 1.412470] smpboot: Max logical packages: 1 [ 1.416470] smpboot: Total of 4 processors activated (14399.35 BogoMIPS) [ 1.441409] node 0 deferred pages initialised in 20ms [ 1.444930] devtmpfs: initialized [ 1.448549] x86/mm: Memory block size: 128MB [ 1.453504] ACPI: PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 1.456521] ACPI: PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 1.460625] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.464482] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.468531] pinctrl core: initialized pinctrl subsystem [ 1.473372] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.476748] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 1.480621] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.484620] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.488479] audit: initializing netlink subsys (disabled) [ 1.492484] audit: type=2000 audit(1727731622.404:1): state=initialized audit_enabled=0 res=1 [ 1.492621] thermal_sys: Registered thermal governor 'fair_share' [ 1.496473] thermal_sys: Registered thermal governor 'bang_bang' [ 1.500470] thermal_sys: Registered thermal governor 'step_wise' [ 1.504469] thermal_sys: Registered thermal governor 'user_space' [ 1.508469] thermal_sys: Registered thermal governor 'power_allocator' [ 1.512487] cpuidle: using governor ladder [ 1.520474] cpuidle: using governor menu [ 1.524444] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 1.524471] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.528574] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 1.532472] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 1.536479] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 1.540891] PCI: Using configuration type 1 for base access [ 1.544567] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 1.549785] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.552530] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 1.556472] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 1.564470] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 1.572469] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 1.579102] ACPI: Added _OSI(Module Device) [ 1.580473] ACPI: Added _OSI(Processor Device) [ 1.584470] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.592470] ACPI: Added _OSI(Processor Aggregator Device) [ 1.712671] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.742128] ACPI: Interpreter enabled [ 1.744492] ACPI: PM: (supports S0 S1 S4 S5) [ 1.748470] ACPI: Using IOAPIC for interrupt routing [ 1.756576] HEST: Table parsing has been initialized. [ 1.760591] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 1.764473] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.776469] PCI: Using E820 reservations for host bridge windows [ 1.781020] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.788577] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PRAD], AE_NOT_FOUND (20220331/psargs-330) [ 1.792473] ACPI Error: Aborting method \_GPE._L24 due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 1.796474] ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_L24] (20220331/evgpe-511) [ 1.800468] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.804468] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.812561] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR] [ 1.820621] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability] [ 1.828470] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.836827] PCI host bridge to bus 0000:00 [ 1.840472] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.848470] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.856470] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.860470] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.868470] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 1.876470] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.884470] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.892470] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.900470] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.904500] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.908554] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.916595] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.924569] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.928637] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.936568] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.940637] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.948508] pci 0000:00:03.0: enabling Extended Tags [ 1.952535] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.956624] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.964487] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.972615] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.976486] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.984606] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 1.992486] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 1.996604] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 2.004486] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 2.008606] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 2.016486] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 2.024604] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 2.028486] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 2.036606] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 2.040488] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 2.048605] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 2.056486] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 2.060603] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 2.068599] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 2.072593] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 2.080481] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 2.088619] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 2.092591] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 2.100612] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 2.104488] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 2.112538] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 2.116558] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 2.124488] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 2.132538] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 2.136571] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 2.144486] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 2.148561] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.156575] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 2.160569] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.168499] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 2.172471] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 2.180573] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 2.184569] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.192500] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 2.196471] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 2.204592] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 2.208486] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 2.216561] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.220574] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.228615] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 2.232685] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 2.240483] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 2.244476] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 2.252476] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 2.256476] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 2.264476] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 2.268476] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 2.272514] pci 0000:00:1f.2: PME# supported from D3hot [ 2.280560] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 2.284487] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 2.292493] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 2.296546] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 2.304490] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 2.312632] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.316521] pci 0000:00:01.1: PCI bridge to [bus 02] [ 2.320519] pci 0000:00:03.0: PCI bridge to [bus 03] [ 2.324554] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 2.332492] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 2.340484] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 2.348479] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 2.352496] pci 0000:04:00.0: enabling Extended Tags [ 2.356576] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 2.364470] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 2.376724] pci 0000:00:11.0: PCI bridge to [bus 04] [ 2.380473] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 2.384478] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 2.392567] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 2.400505] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 2.404506] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 2.412488] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 2.416658] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 2.424691] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 2.428473] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 2.436472] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 2.444571] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 2.448505] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 2.456507] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 2.460488] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 2.468656] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 2.472686] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 2.476473] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 2.484472] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 2.492492] pci_bus 0000:07: extended config space not accessible [ 2.496495] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 2.504486] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 2.508478] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 2.516478] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 2.524516] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.532581] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 2.536474] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 2.544476] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 2.552470] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 2.560470] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 2.568470] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 2.576470] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 2.588470] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 2.596470] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 2.604470] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 2.612470] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 2.625260] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 2.628474] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.640488] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 2.648470] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 2.656536] PCI host bridge to bus 0000:ff [ 2.660471] pci_bus 0000:ff: root bus resource [bus ff] [ 2.664483] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 2.672549] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 2.676538] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 2.684529] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 2.688528] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 2.696531] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 2.700536] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 2.708527] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 2.716528] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 2.720528] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 2.728531] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 2.732527] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 2.740530] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 2.744532] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 2.752546] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 2.756559] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 2.764551] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 2.768552] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 2.776551] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 2.780551] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 2.788554] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 2.792556] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 2.800560] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 2.804553] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 2.812552] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 2.816552] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 2.824553] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 2.828551] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 2.836550] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 2.840529] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 2.848534] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 2.852529] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 2.860532] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 2.864528] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 2.872527] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 2.880688] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 2.884523] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 2.892520] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 2.896520] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 2.904520] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 2.908519] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 2.916531] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 2.920520] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 2.930091] iommu: Default domain type: Translated [ 2.932470] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.940569] pps_core: LinuxPPS API ver. 1 registered [ 2.944470] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.952472] PTP clock support registered [ 2.956408] EDAC MC: Ver: 3.0.0 [ 2.960729] NetLabel: Initializing [ 2.964135] NetLabel: domain hash size = 128 [ 2.968472] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 2.976492] NetLabel: unlabeled traffic allowed by default [ 2.980470] PCI: Using ACPI for IRQ routing [ 2.991452] PCI: pci_cache_line_size set to 64 bytes [ 2.991577] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] [ 2.991580] e820: reserve RAM buffer [mem 0x7de2c000-0x7fffffff] [ 2.992508] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 2.996468] pci 0000:07:01.0: vgaarb: bridge control possible [ 2.996468] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.012477] vgaarb: loaded [ 3.017194] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 3.024470] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 3.032469] clocksource: Switched to clocksource tsc-early [ 3.038173] VFS: Disk quotas dquot_6.6.0 [ 3.042124] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.049190] AppArmor: AppArmor Filesystem Enabled [ 3.053930] pnp: PnP ACPI init [ 3.057141] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 3.063755] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 3.070365] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 3.076979] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 3.083720] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 3.090825] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 3.096751] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 3.104030] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 3.110148] pnp 00:07: [dma 0 disabled] [ 3.110385] pnp 00:08: [dma 0 disabled] [ 3.110662] system 00:09: [io 0x0400-0x0453] has been reserved [ 3.116591] system 00:09: [io 0x0458-0x047f] has been reserved [ 3.122508] system 00:09: [io 0x1180-0x119f] has been reserved [ 3.128427] system 00:09: [io 0x0500-0x057f] has been reserved [ 3.134347] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 3.140959] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 3.147921] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 3.154640] system 00:0a: [io 0x0454-0x0457] has been reserved [ 3.160842] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 3.168084] pnp: PnP ACPI: found 12 devices [ 3.178801] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.187757] NET: Registered PF_INET protocol family [ 3.192821] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 3.203156] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 3.211730] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.219560] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 3.227863] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 3.235658] TCP: Hash tables configured (established 65536 bind 65536) [ 3.242280] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 3.249835] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.256663] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.263955] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.269623] NET: Registered PF_XDP protocol family [ 3.274436] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.279415] pci 0000:00:01.1: PCI bridge to [bus 02] [ 3.284390] pci 0000:00:03.0: PCI bridge to [bus 03] [ 3.289365] pci 0000:00:11.0: PCI bridge to [bus 04] [ 3.294331] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 3.300431] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.308181] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 3.313147] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 3.319243] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 3.326034] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 3.331003] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 3.337096] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 3.343887] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 3.348857] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 3.355642] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.363385] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 3.369567] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 3.375748] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 3.381928] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 3.388106] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.394980] pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.401852] pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.408811] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.415773] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 3.421346] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.428566] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 3.434139] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 3.440405] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 3.445975] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 3.452244] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 3.458510] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.465729] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 3.471909] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 3.478087] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 3.484268] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 3.490446] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.497319] pci_bus 0000:07: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.504193] pci_bus 0000:07: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.511152] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.518207] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 3.549578] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 23735 usecs [ 3.577566] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 20094 usecs [ 3.585069] PCI: CLS 64 bytes, default 64 [ 3.589122] DMAR: No SATC found [ 3.589155] Trying to unpack rootfs image as initramfs... [ 3.592268] DMAR: dmar0: Using Queued invalidation [ 3.592345] pci 0000:00:00.0: Adding to iommu group 0 [ 3.607587] pci 0000:00:01.0: Adding to iommu group 1 [ 3.612668] pci 0000:00:01.1: Adding to iommu group 2 [ 3.617751] pci 0000:00:03.0: Adding to iommu group 3 [ 3.622831] pci 0000:00:04.0: Adding to iommu group 4 [ 3.627915] pci 0000:00:04.1: Adding to iommu group 5 [ 3.632998] pci 0000:00:04.2: Adding to iommu group 6 [ 3.638078] pci 0000:00:04.3: Adding to iommu group 7 [ 3.643160] pci 0000:00:04.4: Adding to iommu group 8 [ 3.648239] pci 0000:00:04.5: Adding to iommu group 9 [ 3.653321] pci 0000:00:04.6: Adding to iommu group 10 [ 3.658485] pci 0000:00:04.7: Adding to iommu group 11 [ 3.663651] pci 0000:00:05.0: Adding to iommu group 12 [ 3.668817] pci 0000:00:05.2: Adding to iommu group 13 [ 3.673982] pci 0000:00:05.4: Adding to iommu group 14 [ 3.679148] pci 0000:00:11.0: Adding to iommu group 15 [ 3.684335] pci 0000:00:16.0: Adding to iommu group 16 [ 3.689505] pci 0000:00:16.1: Adding to iommu group 16 [ 3.694676] pci 0000:00:1a.0: Adding to iommu group 17 [ 3.699852] pci 0000:00:1c.0: Adding to iommu group 18 [ 3.705021] pci 0000:00:1c.1: Adding to iommu group 19 [ 3.710190] pci 0000:00:1d.0: Adding to iommu group 20 [ 3.715360] pci 0000:00:1e.0: Adding to iommu group 21 [ 3.720569] pci 0000:00:1f.0: Adding to iommu group 22 [ 3.725732] pci 0000:00:1f.2: Adding to iommu group 22 [ 3.730897] pci 0000:00:1f.3: Adding to iommu group 22 [ 3.736062] pci 0000:00:1f.6: Adding to iommu group 22 [ 3.741238] pci 0000:04:00.0: Adding to iommu group 23 [ 3.746407] pci 0000:05:00.0: Adding to iommu group 24 [ 3.751579] pci 0000:06:00.0: Adding to iommu group 25 [ 3.756723] pci 0000:07:01.0: Adding to iommu group 21 [ 3.761908] pci 0000:ff:08.0: Adding to iommu group 26 [ 3.767086] pci 0000:ff:09.0: Adding to iommu group 27 [ 3.772300] pci 0000:ff:0a.0: Adding to iommu group 28 [ 3.777475] pci 0000:ff:0a.1: Adding to iommu group 28 [ 3.782641] pci 0000:ff:0a.2: Adding to iommu group 28 [ 3.787812] pci 0000:ff:0a.3: Adding to iommu group 28 [ 3.793006] pci 0000:ff:0b.0: Adding to iommu group 29 [ 3.798176] pci 0000:ff:0b.3: Adding to iommu group 29 [ 3.803367] pci 0000:ff:0c.0: Adding to iommu group 30 [ 3.808540] pci 0000:ff:0c.1: Adding to iommu group 30 [ 3.813742] pci 0000:ff:0d.0: Adding to iommu group 31 [ 3.818915] pci 0000:ff:0d.1: Adding to iommu group 31 [ 3.824107] pci 0000:ff:0e.0: Adding to iommu group 32 [ 3.829285] pci 0000:ff:0e.1: Adding to iommu group 32 [ 3.834454] pci 0000:ff:0f.0: Adding to iommu group 33 [ 3.839617] pci 0000:ff:0f.1: Adding to iommu group 34 [ 3.844784] pci 0000:ff:0f.2: Adding to iommu group 35 [ 3.849950] pci 0000:ff:0f.3: Adding to iommu group 36 [ 3.855112] pci 0000:ff:0f.4: Adding to iommu group 37 [ 3.860277] pci 0000:ff:0f.5: Adding to iommu group 38 [ 3.865449] pci 0000:ff:10.0: Adding to iommu group 39 [ 3.870633] pci 0000:ff:10.1: Adding to iommu group 40 [ 3.875804] pci 0000:ff:10.2: Adding to iommu group 41 [ 3.880977] pci 0000:ff:10.3: Adding to iommu group 42 [ 3.886143] pci 0000:ff:10.4: Adding to iommu group 43 [ 3.891307] pci 0000:ff:10.5: Adding to iommu group 44 [ 3.896472] pci 0000:ff:10.6: Adding to iommu group 45 [ 3.901640] pci 0000:ff:10.7: Adding to iommu group 46 [ 3.906847] pci 0000:ff:13.0: Adding to iommu group 47 [ 3.912022] pci 0000:ff:13.1: Adding to iommu group 47 [ 3.917195] pci 0000:ff:13.4: Adding to iommu group 47 [ 3.922368] pci 0000:ff:13.5: Adding to iommu group 47 [ 3.927570] pci 0000:ff:16.0: Adding to iommu group 48 [ 3.932743] pci 0000:ff:16.1: Adding to iommu group 48 [ 3.937919] pci 0000:ff:16.2: Adding to iommu group 48 [ 3.946949] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 3.953405] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.959846] software IO TLB: mapped [mem 0x0000000079e2c000-0x000000007de2c000] (64MB) [ 3.968339] Initialise system trusted keyrings [ 3.972802] Key type blacklist registered [ 3.976895] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 3.985173] zbud: loaded [ 3.988036] integrity: Platform Keyring initialized [ 3.992930] integrity: Machine keyring initialized [ 3.997723] Key type asymmetric registered [ 4.001819] Asymmetric key parser 'x509' registered [ 4.035803] Freeing initrd memory: 40392K [ 4.047275] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 4.053062] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 4.060495] io scheduler mq-deadline registered [ 4.067463] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.074277] Monitor-Mwait will be used to enter C-1 state [ 4.074290] Monitor-Mwait will be used to enter C-2 state [ 4.074297] ACPI: \_SB_.SCK0.C000: Found 2 idle states [ 4.084423] ERST: Error Record Serialization Table (ERST) support is initialized. [ 4.091917] pstore: Registered erst as persistent store backend [ 4.098002] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.104440] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.112544] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.120763] Linux agpgart interface v0.103 [ 4.125008] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 4.134153] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 4.141032] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 4.150895] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.155873] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.161119] mousedev: PS/2 mouse device common for all mice [ 4.166734] rtc_cmos 00:02: RTC can wake from S4 [ 4.171659] rtc_cmos 00:02: registered as rtc0 [ 4.176140] rtc_cmos 00:02: setting system clock to 2024-09-30T21:27:06 UTC (1727731626) [ 4.184272] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.192098] intel_pstate: Intel P-state driver initializing [ 4.197987] ledtrig-cpu: registered to indicate activity on CPUs [ 4.222477] NET: Registered PF_INET6 protocol family [ 4.235420] Segment Routing with IPv6 [ 4.239112] In-situ OAM (IOAM) with IPv6 [ 4.243075] mip6: Mobile IPv6 [ 4.246053] NET: Registered PF_PACKET protocol family [ 4.251185] mpls_gso: MPLS GSO support [ 4.255444] microcode: sig=0x306e4, pf=0x8, revision=0x42e [ 4.260990] microcode: Microcode Update Driver: v2.2. [ 4.260998] IPI shorthand broadcast: enabled [ 4.270355] sched_clock: Marking stable (3280858137, 989463285)->(4637905805, -367584383) [ 4.278782] registered taskstats version 1 [ 4.282898] Loading compiled-in X.509 certificates [ 4.327070] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.335799] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 4.346466] zswap: loaded using pool lzo/zbud [ 4.351051] Key type .fscrypt registered [ 4.354986] Key type fscrypt-provisioning registered [ 4.360250] pstore: Using crash dump compression: deflate [ 4.372898] Key type encrypted registered [ 4.376938] AppArmor: AppArmor sha1 policy hashing enabled [ 4.382435] ima: No TPM chip found, activating TPM-bypass! [ 4.387919] ima: Allocated hash algorithm: sha256 [ 4.392637] ima: No architecture policies found [ 4.397176] evm: Initialising EVM extended attributes: [ 4.402313] evm: security.selinux [ 4.405630] evm: security.SMACK64 (disabled) [ 4.409904] evm: security.SMACK64EXEC (disabled) [ 4.414524] evm: security.SMACK64TRANSMUTE (disabled) [ 4.419577] evm: security.SMACK64MMAP (disabled) [ 4.424197] evm: security.apparmor [ 4.427601] evm: security.ima [ 4.430574] evm: security.capability [ 4.434155] evm: HMAC attrs: 0x1 [ 4.615744] clk: Disabling unused clocks [ 4.621547] Freeing unused decrypted memory: 2036K [ 4.627057] Freeing unused kernel image (initmem) memory: 2796K [ 4.633062] Write protecting the kernel read-only data: 26624k [ 4.639630] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 4.646590] Freeing unused kernel image (rodata/data gap) memory: 1168K [ 4.739960] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.746406] x86/mm: Checking user space page tables [ 4.826705] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.833147] Run /init as init process [ 4.836815] with arguments: [ 4.836817] /init [ 4.836818] with environment: [ 4.836819] HOME=/ [ 4.836820] TERM=linux [ 4.836821] BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 [ 4.989495] tsc: Refined TSC clocksource calibration: 1799.999 MHz [ 4.995692] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 5.005726] clocksource: Switched to clocksource tsc [ 5.056048] SCSI subsystem initialized [ 5.060252] e1000e: Intel(R) PRO/1000 Network Driver [ 5.065226] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 5.071530] ACPI: bus type USB registered [ 5.075579] usbcore: registered new interface driver usbfs [ 5.081082] usbcore: registered new interface driver hub [ 5.086417] usbcore: registered new device driver usb [ 5.086675] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.110454] libata version 3.00 loaded. [ 5.112409] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.117662] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.125081] ehci-pci 0000:00:1a.0: debug port 2 [ 5.131241] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 5.133592] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 5.137148] i2c i2c-0: 1/6 memory slots populated (from DMI) [ 5.148393] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 5.157481] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.163447] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.163679] ahci 0000:00:1f.2: version 3.0 [ 5.166486] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 5.171714] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.171717] usb usb1: Product: EHCI Host Controller [ 5.171719] usb usb1: Manufacturer: Linux 6.1.0-25-amd64 ehci_hcd [ 5.171720] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.171892] hub 1-0:1.0: USB hub found [ 5.190433] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 5.191413] hub 1-0:1.0: 2 ports detected [ 5.197504] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 5.202481] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.231352] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.231653] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a6 [ 5.238777] ehci-pci 0000:00:1d.0: debug port 2 [ 5.246672] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 5.255169] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 5.258153] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.270643] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.277487] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.285783] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.286131] scsi host0: ahci [ 5.294051] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.294054] usb usb2: Product: EHCI Host Controller [ 5.294056] usb usb2: Manufacturer: Linux 6.1.0-25-amd64 ehci_hcd [ 5.294058] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.294237] hub 2-0:1.0: USB hub found [ 5.297134] scsi host1: ahci [ 5.304180] hub 2-0:1.0: 2 ports detected [ 5.309186] scsi host2: ahci [ 5.327827] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 5.330921] scsi host3: ahci [ 5.340942] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 5.344136] scsi host4: ahci [ 5.350227] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 5.353285] scsi host5: ahci [ 5.362411] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 32 [ 5.370185] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 32 [ 5.377638] isci 0000:04:00.0: OEM parameter table found in OROM [ 5.378194] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 32 [ 5.384202] isci 0000:04:00.0: OEM SAS parameters (version: 1.0) loaded (platform) [ 5.390994] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a7 [ 5.390999] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 5.391081] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.391591] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 32 [ 5.408478] e1000e 0000:05:00.0 enx002590eb25a6: renamed from eth0 [ 5.413941] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 32 [ 5.413943] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 32 [ 5.415624] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 5.460272] scsi host6: isci [ 5.465483] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.481956] e1000e 0000:06:00.0 enx002590eb25a7: renamed from eth1 [ 5.569519] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.629982] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.638182] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.645869] hub 1-1:1.0: USB hub found [ 5.649779] hub 1-1:1.0: 6 ports detected [ 5.728289] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.734521] ata4: SATA link down (SStatus 0 SControl 300) [ 5.737780] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.739983] ata3: SATA link down (SStatus 0 SControl 300) [ 5.748110] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.753554] ata5: SATA link down (SStatus 0 SControl 300) [ 5.766136] ata6: SATA link down (SStatus 0 SControl 300) [ 5.766244] hub 2-1:1.0: USB hub found [ 5.771554] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 5.775446] hub 2-1:1.0: 8 ports detected [ 5.782107] ata2: SATA link down (SStatus 0 SControl 300) [ 5.791791] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.799639] ata1.00: configured for UDMA/133 [ 5.803997] scsi: waiting for bus probes to complete ... [ 5.889764] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 5.920094] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.927786] sd 0:0:0:0: [sda] Write Protect is off [ 5.932584] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.932606] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.941670] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 5.947865] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 5.977121] sda: sda1 sda2 < sda5 > [ 5.981044] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.063031] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 6.071398] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.078712] usb 1-1.1: Product: Hermon USB hidmouse Device [ 6.084203] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 6.105345] hid: raw HID events driver (C) Jiri Kosina [ 6.118423] usbcore: registered new interface driver usbhid [ 6.124037] usbhid: USB HID core driver [ 6.131547] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input3 [ 6.146469] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 6.161459] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input4 [ 6.265645] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.277891] device-mapper: uevent: version 1.0.3 [ 6.282619] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 6.345666] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 7.096595] PM: Image not found (code -22) [ 7.456259] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 7.467810] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 7.641663] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 9.444213] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 9.475219] ACPI: button: Power Button [PWRB] [ 9.479689] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 9.487143] ACPI: button: Power Button [PWRF] [ 9.551322] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 9.634086] dca service started, version 1.12.1 [ 9.680690] IPMI message handler: version 39.2 [ 9.686898] ipmi device interface [ 9.713029] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 9.720965] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 9.726708] RAPL PMU: hw unit of domain package 2^-16 Joules [ 9.732368] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 9.765908] iTCO_vendor_support: vendor-support=0 [ 9.797704] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 9.804693] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.805416] ipmi_si: IPMI System Interface driver [ 9.814669] cryptd: max_cpu_qlen set to 1000 [ 9.814771] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 9.825361] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 9.832611] ipmi_si: Adding SMBIOS-specified kcs state machine [ 9.838957] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 9.845015] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 9.944524] AVX version of gcm_enc/dec engaged. [ 9.950256] AES CTR mode by8 optimization enabled [ 9.974124] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 9.983455] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 9.990629] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 9.999342] ipmi_si: Adding ACPI-specified kcs state machine [ 10.005175] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 10.005442] ACPI: bus type drm_connector registered [ 10.209961] mgag200 0000:07:01.0: vgaarb: deactivate vga console [ 10.221031] Console: switching to colour dummy device 80x25 [ 10.232777] [drm] Initialized mgag200 1.0.0 20110418 for 0000:07:01.0 on minor 0 [ 10.242214] fbcon: mgag200drmfb (fb0) is primary device [ 10.261693] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 10.312552] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x0703, dev_id: 0x20) [ 10.352140] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 10.422341] ipmi_ssif: IPMI SSIF Interface driver [ 10.619372] Console: switching to colour frame buffer device 128x48 [ 10.728618] mgag200 0000:07:01.0: [drm] fb0: mgag200drmfb frame buffer device [ 10.942350] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.942377] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.942383] EDAC sbridge: Seeking for: PCI ID 8086:0e60 [ 10.942391] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.942400] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.942404] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.942412] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.942416] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.942424] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.942427] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.942436] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.942439] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.942448] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.942451] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.942460] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.942463] EDAC sbridge: Seeking for: PCI ID 8086:0e68 [ 10.942471] EDAC sbridge: Seeking for: PCI ID 8086:0e79 [ 10.942478] EDAC sbridge: Seeking for: PCI ID 8086:0e6a [ 10.942486] EDAC sbridge: Seeking for: PCI ID 8086:0e6b [ 10.942493] EDAC sbridge: Seeking for: PCI ID 8086:0e6c [ 10.942501] EDAC sbridge: Seeking for: PCI ID 8086:0e6d [ 10.942508] EDAC sbridge: Seeking for: PCI ID 8086:0eb8 [ 10.942516] EDAC sbridge: Seeking for: PCI ID 8086:0ebc [ 10.942524] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.942533] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.942535] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.942545] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.942547] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.942557] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.942703] EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT) [ 10.953784] EDAC sbridge: Ver: 1.1.2 [ 11.036461] intel_rapl_common: Found RAPL domain package [ 11.041795] intel_rapl_common: Found RAPL domain core [ 11.046858] intel_rapl_common: Found RAPL domain dram [ 12.319542] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 13.212856] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 13.243943] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 13.292337] Adding 1949692k swap on /dev/mapper/fiano1--vg-swap_1. Priority:-2 extents:1 across:1949692k FS [ 14.161317] audit: type=1400 audit(1727731636.904:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1066 comm="apparmor_parser" [ 14.176355] audit: type=1400 audit(1727731636.908:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1067 comm="apparmor_parser" [ 14.191721] audit: type=1400 audit(1727731636.908:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1067 comm="apparmor_parser" [ 14.226923] audit: type=1400 audit(1727731636.972:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1069 comm="apparmor_parser" [ 14.242961] audit: type=1400 audit(1727731636.976:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1069 comm="apparmor_parser" [ 14.257902] audit: type=1400 audit(1727731636.976:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1069 comm="apparmor_parser" [ 14.422363] audit: type=1400 audit(1727731637.168:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=1070 comm="apparmor_parser" [ 14.437665] audit: type=1400 audit(1727731637.168:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1068 comm="apparmor_parser" [ 14.457016] audit: type=1400 audit(1727731637.172:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1068 comm="apparmor_parser" [ 14.474464] audit: type=1400 audit(1727731637.172:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1068 comm="apparmor_parser" [ 17.786558] e1000e 0000:05:00.0 enx002590eb25a6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 17.796314] IPv6: ADDRCONF(NETDEV_CHANGE): enx002590eb25a6: link becomes ready