[ 0.000000] Linux version 6.12.0-rc1+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Mon Sep 30 21:09:34 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/pinot1--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000f6000000-0x00000000f6003fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SML/H8SML, BIOS 3.5 11/25/2013 [ 0.000000] DMI: Memory slots populated: 2/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000010] Xen PV: Detected 4 vCPUS [ 0.038868] tsc: Fast TSC calibration using PIT [ 0.038870] tsc: Detected 2800.078 MHz processor [ 0.038871] tsc: Detected 2800.002 MHz TSC [ 0.039087] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.039090] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.039097] last_pfn = 0xdfeb2 max_arch_pfn = 0x400000000 [ 0.039099] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.039101] MTRRs set to read-only [ 0.039104] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.065085] RAMDISK: [mem 0x04000000-0x05473fff] [ 0.065096] ACPI: Early table checksum verification disabled [ 0.065845] ACPI: RSDP 0x00000000000FA1C0 000024 (v02 ACPIAM) [ 0.065853] ACPI: XSDT 0x00000000DFEA0100 00007C (v01 SMCI 20131125 MSFT 00000097) [ 0.065879] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.065911] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20240827/tbfadt-560) [ 0.065921] ACPI: DSDT 0x00000000DFEA0600 00562B (v01 1CF11 1CF11000 00000000 INTL 20051117) [ 0.065931] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.065939] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.065949] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.065958] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.065972] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.065982] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.065991] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.066001] ACPI: SSDT 0x00000000DFEAA6F0 000B9C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.066010] ACPI: EINJ 0x00000000DFEAB290 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.066019] ACPI: BERT 0x00000000DFEAB420 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.066028] ACPI: ERST 0x00000000DFEAB450 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.066038] ACPI: HEST 0x00000000DFEAB660 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.066043] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.066045] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c2a] [ 0.066046] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.066047] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.066048] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.066050] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.066051] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.066052] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.066053] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.066054] ACPI: Reserving SSDT table memory at [mem 0xdfeaa6f0-0xdfeab28b] [ 0.066055] ACPI: Reserving EINJ table memory at [mem 0xdfeab290-0xdfeab3bf] [ 0.066056] ACPI: Reserving BERT table memory at [mem 0xdfeab420-0xdfeab44f] [ 0.066058] ACPI: Reserving ERST table memory at [mem 0xdfeab450-0xdfeab65f] [ 0.066059] ACPI: Reserving HEST table memory at [mem 0xdfeab660-0xdfeab707] [ 0.066145] APIC: Switched APIC routing to: Xen PV [ 0.068453] Zone ranges: [ 0.068454] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.068457] DMA32 [mem 0x0000000001000000-0x00000000dfeb1fff] [ 0.068459] Normal empty [ 0.068460] Movable zone start for each node [ 0.068461] Early memory node ranges [ 0.068461] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.068464] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.068466] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.068473] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.068530] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.070915] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.070921] p2m virtual area at (____ptrval____), size is 40000000 [ 0.334226] Remapped 102 page(s) [ 0.334229] Remapped 0 non-RAM page(s) [ 0.334739] ACPI: PM-Timer IO Port: 0x808 [ 0.334763] CPU topo: CPU limit of 4 reached. Ignoring further CPUs [ 0.334786] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.334789] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.334808] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.334815] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.334824] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.334828] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.334846] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.334850] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.334861] CPU topo: Max. logical packages: 1 [ 0.334862] CPU topo: Max. logical dies: 1 [ 0.334862] CPU topo: Max. dies per package: 1 [ 0.334868] CPU topo: Max. threads per core: 1 [ 0.334870] CPU topo: Num. cores per package: 4 [ 0.334870] CPU topo: Num. threads per package: 4 [ 0.334871] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.334872] CPU topo: Rejected CPUs 4 [ 0.334887] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.334889] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.334891] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.334893] PM: hibernation: Registered nosave memory: [mem 0x20066000-0xdfe9dfff] [ 0.334894] PM: hibernation: Registered nosave memory: [mem 0xdfe9e000-0xdfe9ffff] [ 0.334895] PM: hibernation: Registered nosave memory: [mem 0xdfea0000-0xdfeb1fff] [ 0.334897] [mem 0x20066000-0xdfe9dfff] available for PCI devices [ 0.334900] Booting kernel on Xen [ 0.334901] Xen version: 4.20-unstable (preserve-AD) [ 0.334905] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.341236] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.341798] percpu: Embedded 57 pages/cpu s194520 r8192 d30760 u524288 [ 0.341805] pcpu-alloc: s194520 r8192 d30760 u524288 alloc=1*2097152 [ 0.341808] pcpu-alloc: [0] 0 1 2 3 [ 0.341864] xen: PV spinlocks enabled [ 0.341867] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.341870] Kernel command line: placeholder root=/dev/mapper/pinot1--vg-root ro console=hvc0 [ 0.341925] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.342043] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.342103] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.342285] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.342289] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.342291] software IO TLB: area num 4. [ 0.423120] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.425636] Dynamic Preempt: voluntary [ 0.425734] rcu: Preemptible hierarchical RCU implementation. [ 0.425736] rcu: RCU event tracing is enabled. [ 0.425736] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.425738] Trampoline variant of Tasks RCU enabled. [ 0.425739] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.425741] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.425757] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.432669] NR_IRQS: 4352, nr_irqs: 1000, preallocated irqs: 16 [ 0.432794] xen:events: Using FIFO-based ABI [ 0.432816] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.432822] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.432827] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.432832] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.432837] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.432841] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.432846] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.432851] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.432856] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.432860] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.432865] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.432870] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.432875] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.432882] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.432887] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.432895] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.438979] Console: colour VGA+ 80x25 [ 0.438983] printk: legacy console [tty0] enabled [ 0.452990] printk: legacy console [hvc0] enabled [ 0.453665] ACPI: Core revision 20240827 [ 0.456229] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.456410] Xen: using vcpuop timer interface [ 0.456415] installing Xen timer for CPU 0 [ 0.456647] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c427961f, max_idle_ns: 440795275103 ns [ 0.456803] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.00 BogoMIPS (lpj=2800002) [ 0.456991] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.457182] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.457302] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.457414] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.457809] Spectre V2 : Mitigation: Retpolines [ 0.457911] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.458053] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.458162] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.458277] RETBleed: Mitigation: untrained return thunk [ 0.458382] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.458525] Speculative Store Bypass: Vulnerable [ 0.458642] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.458783] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.458806] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.458943] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.459051] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.481609] Freeing SMP alternatives memory: 40K [ 0.481728] pid_max: default: 32768 minimum: 301 [ 0.481830] LSM: initializing lsm=capability,selinux [ 0.481974] SELinux: Initializing. [ 0.482303] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.482446] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.483929] cpu 0 spinlock event irq 57 [ 0.484043] VPMU disabled by hypervisor. [ 0.484601] Performance Events: PMU not available due to virtualization, using software events only. [ 0.484789] signal: max sigframe size: 1776 [ 0.485827] rcu: Hierarchical SRCU implementation. [ 0.485936] rcu: Max phase no-delay instances is 400. [ 0.486160] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.495815] smp: Bringing up secondary CPUs ... [ 0.497821] installing Xen timer for CPU 1 [ 0.498279] installing Xen timer for CPU 2 [ 0.498678] installing Xen timer for CPU 3 [ 0.024902] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0011 [ 0.498862] cpu 1 spinlock event irq 77 [ 0.024902] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0012 [ 0.508869] cpu 2 spinlock event irq 78 [ 0.024902] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0013 [ 0.509124] cpu 3 spinlock event irq 79 [ 0.509910] smp: Brought up 1 node, 4 CPUs [ 0.510073] Memory: 381932K/524284K available (16384K kernel code, 2785K rwdata, 6296K rodata, 2732K init, 1708K bss, 138300K reserved, 0K cma-reserved) [ 0.510372] devtmpfs: initialized [ 0.510372] x86/mm: Memory block size: 128MB [ 0.511286] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.511286] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.511286] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.511918] PM: RTC time: 22:33:34, date: 2024-09-30 [ 0.512191] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.512361] xen:grant_table: Grant tables using version 1 layout [ 0.512483] Grant table initialized [ 0.512814] audit: initializing netlink subsys (disabled) [ 0.512969] audit: type=2000 audit(1727735614.594:1): state=initialized audit_enabled=0 res=1 [ 0.513048] thermal_sys: Registered thermal governor 'step_wise' [ 0.513048] thermal_sys: Registered thermal governor 'user_space' [ 0.513934] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.514191] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.596824] PCI: Using configuration type 1 for base access [ 0.597004] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.597031] ACPI: Added _OSI(Module Device) [ 0.597811] ACPI: Added _OSI(Processor Device) [ 0.597921] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.598031] ACPI: Added _OSI(Processor Aggregator Device) [ 0.602916] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.603457] xen: registering gsi 9 triggering 0 polarity 1 [ 0.604169] ACPI: Interpreter enabled [ 0.604291] ACPI: PM: (supports S0 S1 S4 S5) [ 0.604808] ACPI: Using IOAPIC for interrupt routing [ 0.604948] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.605103] PCI: Using E820 reservations for host bridge windows [ 0.605380] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.615417] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.615541] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.615692] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.615806] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.615948] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.616374] PCI host bridge to bus 0000:00 [ 0.616502] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.616614] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.616725] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.616806] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.616947] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.617095] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.617247] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.617811] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.618352] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.618568] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.618686] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.618812] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.618984] pci 0000:00:09.0: enabling Extended Tags [ 0.619209] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.619502] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.619718] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.619820] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.619967] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.620134] pci 0000:00:0a.0: enabling Extended Tags [ 0.620358] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.620666] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f conventional PCI endpoint [ 0.620890] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.621027] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.621181] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.621309] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.621437] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.621564] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.621730] pci 0000:00:11.0: set SATA to AHCI mode [ 0.622036] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.622264] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.622672] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.622850] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.623264] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.623453] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.623820] pci 0000:00:12.2: supports D1 D2 [ 0.623922] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.624193] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.624382] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.624784] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.624861] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.625266] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.625454] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.625788] pci 0000:00:13.2: supports D1 D2 [ 0.625805] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.626097] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.626613] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.626801] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.626931] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.627085] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.627213] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.627340] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.627509] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.627620] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.627728] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.627805] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.628109] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.628625] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.628870] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.628999] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.629120] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.629404] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.629598] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.630006] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.630360] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.630673] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.630986] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.631337] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.631689] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.632136] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.632330] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.632493] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.632627] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.633069] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.633476] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.633763] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.633858] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.634050] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.634191] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.634562] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.636854] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.637027] pci_bus 0000:03: extended config space not accessible [ 0.637195] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.637854] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.637991] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.638124] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.638362] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.638766] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.638826] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.638998] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.639142] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.639290] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.639436] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.639661] pci_bus 0000:00: on NUMA node 0 [ 0.640126] xen: registering gsi 13 triggering 1 polarity 0 [ 0.640558] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.640741] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.640872] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.641046] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.641286] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.641458] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.641639] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.641818] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.642030] xen:balloon: Initialising balloon driver [ 0.642149] iommu: Default domain type: Translated [ 0.642149] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.642226] SCSI subsystem initialized [ 0.642820] libata version 3.00 loaded. [ 0.642853] ACPI: bus type USB registered [ 0.642972] usbcore: registered new interface driver usbfs [ 0.643086] usbcore: registered new interface driver hub [ 0.643200] usbcore: registered new device driver usb [ 0.643321] pps_core: LinuxPPS API ver. 1 registered [ 0.643425] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.643579] PTP clock support registered [ 0.643864] Advanced Linux Sound Architecture Driver Initialized. [ 0.644220] NetLabel: Initializing [ 0.644319] NetLabel: domain hash size = 128 [ 0.644420] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.644550] NetLabel: unlabeled traffic allowed by default [ 0.644826] PCI: Using ACPI for IRQ routing [ 0.671974] PCI: pci_cache_line_size set to 64 bytes [ 0.672140] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.672143] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.672167] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.672167] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.672167] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.672194] vgaarb: loaded [ 0.676457] clocksource: Switched to clocksource tsc-early [ 0.676686] VFS: Disk quotas dquot_6.6.0 [ 0.676686] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.676686] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.676686] pnp: PnP ACPI init [ 0.676878] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.677149] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.677160] xen: registering gsi 8 triggering 1 polarity 0 [ 0.677826] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.678138] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.678273] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.678727] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.678864] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.678980] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.679108] system 00:05: [io 0x040b] has been reserved [ 0.679220] system 00:05: [io 0x04d6] has been reserved [ 0.679331] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.679470] system 00:05: [io 0x0c14] has been reserved [ 0.679581] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.679696] system 00:05: [io 0x0c52] has been reserved [ 0.679817] system 00:05: [io 0x0c6c] has been reserved [ 0.679929] system 00:05: [io 0x0c6f] has been reserved [ 0.680040] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.680156] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.680270] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.680384] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.680507] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.680621] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.680762] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.680883] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.680997] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.681111] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.681225] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.681340] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.681457] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.681573] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.681960] xen: registering gsi 4 triggering 1 polarity 0 [ 0.681964] Already setup the GSI :4 [ 0.682070] pnp 00:06: [dma 0 disabled] [ 0.682382] xen: registering gsi 3 triggering 1 polarity 0 [ 0.682393] pnp 00:07: [dma 0 disabled] [ 0.682557] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.682947] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.683175] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.683310] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.683429] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.683548] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.683835] pnp: PnP ACPI: found 10 devices [ 0.704713] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.704870] NET: Registered PF_INET protocol family [ 0.705035] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.705470] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.705624] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.705774] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.705956] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.706127] TCP: Hash tables configured (established 4096 bind 4096) [ 0.706284] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.706430] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.706588] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.706926] RPC: Registered named UNIX socket transport module. [ 0.707042] RPC: Registered udp transport module. [ 0.707150] RPC: Registered tcp transport module. [ 0.707258] RPC: Registered tcp-with-tls transport module. [ 0.707368] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.708013] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.708131] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.708293] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.708429] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.708542] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.708666] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.708841] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.708963] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.709088] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.709250] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.709366] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.709481] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.709609] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.709728] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.709855] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.709968] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.710106] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.710218] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.710333] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.710448] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.710565] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.710680] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.710794] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.710920] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.711068] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.711333] xen: registering gsi 16 triggering 0 polarity 1 [ 0.711358] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.372949] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 646175 usecs [ 1.373190] xen: registering gsi 16 triggering 0 polarity 1 [ 1.373198] Already setup the GSI :16 [ 1.395950] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 22286 usecs [ 1.396193] xen: registering gsi 17 triggering 0 polarity 1 [ 1.396237] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.396422] xen: registering gsi 18 triggering 0 polarity 1 [ 1.396444] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.418951] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 22058 usecs [ 1.419191] xen: registering gsi 18 triggering 0 polarity 1 [ 1.419198] Already setup the GSI :18 [ 1.441949] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 22284 usecs [ 1.442192] xen: registering gsi 19 triggering 0 polarity 1 [ 1.442234] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.442442] xen: registering gsi 18 triggering 0 polarity 1 [ 1.442446] Already setup the GSI :18 [ 1.464948] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 22034 usecs [ 1.465171] PCI: CLS 64 bytes, default 64 [ 1.465318] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.465434] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 1.465484] Unpacking initramfs... [ 1.465630] kvm_intel: VMX not supported by CPU 0 [ 1.465860] kvm_amd: SVM not supported by CPU 0 [ 1.465971] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c427961f, max_idle_ns: 440795275103 ns [ 1.468455] clocksource: Switched to clocksource tsc [ 1.553047] Initialise system trusted keyrings [ 1.553309] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.553625] NFS: Registering the id_resolver key type [ 1.553755] Key type id_resolver registered [ 1.553864] Key type id_legacy registered [ 1.554068] 9p: Installing v9fs 9p2000 file system support [ 1.571263] Key type asymmetric registered [ 1.571368] Asymmetric key parser 'x509' registered [ 1.571489] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.571641] io scheduler mq-deadline registered [ 1.571744] io scheduler kyber registered [ 1.572415] xen: registering gsi 53 triggering 0 polarity 1 [ 1.572443] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.572746] xen: registering gsi 54 triggering 0 polarity 1 [ 1.572762] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.573107] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.573285] ACPI: button: Power Button [PWRB] [ 1.573427] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.573638] ACPI: button: Power Button [PWRF] [ 1.578432] xen:xen_evtchn: Event-channel device installed [ 1.578669] xen_pciback: backend is vpci [ 1.579540] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.579967] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.580750] hpet_acpi_add: no address or irqs in _CRS [ 1.580943] Non-volatile memory driver v1.3 [ 1.583648] loop: module loaded [ 1.590347] ahci 0000:00:11.0: version 3.0 [ 1.590450] xen: registering gsi 22 triggering 0 polarity 1 [ 1.590478] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.590608] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.590781] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.590891] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.592102] scsi host0: ahci [ 1.592438] scsi host1: ahci [ 1.592788] scsi host2: ahci [ 1.593171] scsi host3: ahci [ 1.593338] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 4 [ 1.593485] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 4 [ 1.593629] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 4 [ 1.593773] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 4 [ 1.594412] tun: Universal TUN/TAP device driver, 1.6 [ 1.594626] e100: Intel(R) PRO/100 Network Driver [ 1.594730] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.594852] sky2: driver version 1.30 [ 1.595028] xen_netfront: Initialising Xen virtual ethernet driver [ 1.595431] xen: registering gsi 16 triggering 0 polarity 1 [ 1.595439] Already setup the GSI :16 [ 1.595564] xen: registering gsi 17 triggering 0 polarity 1 [ 1.595570] Already setup the GSI :17 [ 1.595595] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.595901] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.596079] xen: registering gsi 19 triggering 0 polarity 1 [ 1.596084] Already setup the GSI :19 [ 1.596191] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.632892] Freeing initrd memory: 20944K [ 1.651074] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 1.651227] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.651368] usb usb1: Product: OHCI PCI host controller [ 1.651473] usb usb1: Manufacturer: Linux 6.12.0-rc1+ ohci_hcd [ 1.651580] usb usb1: SerialNumber: 0000:00:12.0 [ 1.651899] hub 1-0:1.0: USB hub found [ 1.652037] hub 1-0:1.0: 3 ports detected [ 1.652498] xen: registering gsi 16 triggering 0 polarity 1 [ 1.652506] Already setup the GSI :16 [ 1.652506] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.652726] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2 [ 1.652891] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.653101] ehci-pci 0000:00:12.2: debug port 1 [ 1.653306] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.658959] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.659135] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 1.659328] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.659468] usb usb2: Product: EHCI Host Controller [ 1.659570] usb usb2: Manufacturer: Linux 6.12.0-rc1+ ehci_hcd [ 1.659676] usb usb2: SerialNumber: 0000:00:12.2 [ 1.659969] hub 2-0:1.0: USB hub found [ 1.660080] hub 2-0:1.0: 6 ports detected [ 1.709008] hub 1-0:1.0: USB hub found [ 1.709130] hub 1-0:1.0: 3 ports detected [ 1.709420] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.709643] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 1.709790] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.709972] ehci-pci 0000:00:13.2: debug port 1 [ 1.710169] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 1.715984] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.716168] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 1.716313] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.716453] usb usb3: Product: EHCI Host Controller [ 1.716582] usb usb3: Manufacturer: Linux 6.12.0-rc1+ ehci_hcd [ 1.716690] usb usb3: SerialNumber: 0000:00:13.2 [ 1.716969] hub 3-0:1.0: USB hub found [ 1.717080] hub 3-0:1.0: 6 ports detected [ 1.717464] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.717674] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.717866] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 1.773053] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 1.773203] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.773344] usb usb4: Product: OHCI PCI host controller [ 1.773448] usb usb4: Manufacturer: Linux 6.12.0-rc1+ ohci_hcd [ 1.773555] usb usb4: SerialNumber: 0000:00:12.1 [ 1.773820] hub 4-0:1.0: USB hub found [ 1.773958] hub 4-0:1.0: 3 ports detected [ 1.774349] xen: registering gsi 18 triggering 0 polarity 1 [ 1.774354] Already setup the GSI :18 [ 1.774490] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.774679] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.774884] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 1.830021] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 1.830201] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.830341] usb usb5: Product: OHCI PCI host controller [ 1.830445] usb usb5: Manufacturer: Linux 6.12.0-rc1+ ohci_hcd [ 1.830570] usb usb5: SerialNumber: 0000:00:13.0 [ 1.830840] hub 5-0:1.0: USB hub found [ 1.830978] hub 5-0:1.0: 3 ports detected [ 1.831410] xen: registering gsi 18 triggering 0 polarity 1 [ 1.831415] Already setup the GSI :18 [ 1.831550] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.831734] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.831932] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 1.887052] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 1.887205] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.887346] usb usb6: Product: OHCI PCI host controller [ 1.887450] usb usb6: Manufacturer: Linux 6.12.0-rc1+ ohci_hcd [ 1.887557] usb usb6: SerialNumber: 0000:00:13.1 [ 1.887843] hub 6-0:1.0: USB hub found [ 1.888020] hub 6-0:1.0: 3 ports detected [ 1.888454] xen: registering gsi 18 triggering 0 polarity 1 [ 1.888460] Already setup the GSI :18 [ 1.888594] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.888780] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.888997] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 1.901965] ata3: SATA link down (SStatus 0 SControl 300) [ 1.902145] ata4: SATA link down (SStatus 0 SControl 300) [ 1.944071] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 1.944222] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.944362] usb usb7: Product: OHCI PCI host controller [ 1.944467] usb usb7: Manufacturer: Linux 6.12.0-rc1+ ohci_hcd [ 1.944573] usb usb7: SerialNumber: 0000:00:14.5 [ 1.944834] hub 7-0:1.0: USB hub found [ 1.945011] hub 7-0:1.0: 2 ports detected [ 1.945354] usbcore: registered new interface driver usblp [ 1.945485] usbcore: registered new interface driver usb-storage [ 1.945700] i8042: PNP: No PS/2 controller found. [ 1.945803] i8042: Probing ports directly. [ 1.949033] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.949144] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.949489] rtc_cmos 00:02: RTC can wake from S4 [ 1.950040] rtc_cmos 00:02: registered as rtc0 [ 1.950253] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 1.950406] device-mapper: uevent: version 1.0.3 [ 1.950587] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 1.950741] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.950897] hid: raw HID events driver (C) Jiri Kosina [ 1.951225] usbcore: registered new interface driver usbhid [ 1.951331] usbhid: USB HID core driver [ 1.951876] Initializing XFRM netlink socket [ 1.952014] NET: Registered PF_INET6 protocol family [ 1.952510] Segment Routing with IPv6 [ 1.952623] In-situ OAM (IOAM) with IPv6 [ 1.952757] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.953037] NET: Registered PF_PACKET protocol family [ 1.953176] 9pnet: Installing 9P2000 support [ 1.953294] Key type dns_resolver registered [ 1.953410] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.953938] IPI shorthand broadcast: enabled [ 1.958531] sched_clock: Marking stable (1934006618, 23902409)->(1964442367, -6533340) [ 1.959000] registered taskstats version 1 [ 1.959104] Loading compiled-in X.509 certificates [ 1.961233] PM: Magic number: 8:638:604 [ 1.961393] printk: legacy console [netcon0] enabled [ 1.961501] netconsole: network logging started [ 1.961774] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.971894] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.972304] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 1.974011] ALSA device list: [ 1.974125] No soundcards found. [ 1.974951] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 2.055970] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.056114] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.056786] ata2.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133 [ 2.057306] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.057541] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 2.057988] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.058242] ata2.00: configured for UDMA/133 [ 2.059613] ata1.00: configured for UDMA/133 [ 2.069974] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.070513] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.070564] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.070798] sd 0:0:0:0: [sda] Write Protect is off [ 2.070941] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.070972] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.071073] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5 [ 2.071320] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.071784] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.071788] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.072096] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 2.072228] sd 1:0:0:0: [sdb] Write Protect is off [ 2.072340] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.072363] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.072554] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 2.114819] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.124696] sdb: sdb1 sdb2 < sdb5 > [ 2.125088] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.126684] Freeing unused kernel image (initmem) memory: 2732K [ 2.126820] Write protecting the kernel read-only data: 24576k [ 2.138817] Freeing unused kernel image (rodata/data gap) memory: 1896K [ 2.196943] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.256462] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.256628] Run /init as init process [ 2.256735] with arguments: [ 2.256736] /init [ 2.256738] placeholder [ 2.256739] with environment: [ 2.256741] HOME=/ [ 2.256742] TERM=linux [ 2.356999] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.357162] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.357276] usb 6-2: Product: Hermon USB hidmouse Device [ 2.357382] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.363492] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.364115] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.367606] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.513302] e1000e: Intel(R) PRO/1000 Network Driver [ 2.513494] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.513747] xen: registering gsi 48 triggering 0 polarity 1 [ 2.513791] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.514075] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.548391] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.556947] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.599816] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e9:2a [ 2.599994] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.600184] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.600404] xen: registering gsi 47 triggering 0 polarity 1 [ 2.600432] xen: --> pirq=47 -> irq=47 (gsi=47) [ 2.600634] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.647012] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.654922] random: crng init done [ 2.690975] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e9:2b [ 2.691140] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.691340] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.694164] e1000e 0000:02:00.0 enx002590aee92b: renamed from eth1 [ 2.694706] e1000e 0000:01:00.0 enx002590aee92a: renamed from eth0 [ 3.453258] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.458867] EXT4-fs (dm-0): mounted filesystem 394c1eec-31dd-4800-8a0c-8c4dabf2faee ro with ordered data mode. Quota mode: none. [ 7.508049] EXT4-fs (dm-0): re-mounted 394c1eec-31dd-4800-8a0c-8c4dabf2faee r/w. Quota mode: none. [ 8.841498] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem [ 8.855398] EXT4-fs (sdb1): mounted filesystem 95c3e2dc-50cb-45c7-b66b-ecc81f3fd06d r/w with ordered data mode. Quota mode: none. [ 8.931859] Adding 1949692k swap on /dev/mapper/pinot1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 10.500789] xenbr0: port 1(enx002590aee92a) entered blocking state [ 10.500970] xenbr0: port 1(enx002590aee92a) entered disabled state [ 10.501097] e1000e 0000:01:00.0 enx002590aee92a: entered allmulticast mode [ 10.501256] e1000e 0000:01:00.0 enx002590aee92a: entered promiscuous mode [ 13.725974] e1000e 0000:01:00.0 enx002590aee92a: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 13.726328] xenbr0: port 1(enx002590aee92a) entered blocking state [ 13.726457] xenbr0: port 1(enx002590aee92a) entered forwarding state