[ 0.000000] Linux version 6.1.112+ (osstest@chardonnay0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Tue Oct 1 13:56:52 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000459] tsc: Detected 2199.998 MHz processor [ 0.000904] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000908] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000915] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000916] Disabled [ 0.000917] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000921] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000960] Kernel/User page tables isolation: disabled on XEN PV. [ 0.028036] RAMDISK: [mem 0x04000000-0x05424fff] [ 0.028045] ACPI: Early table checksum verification disabled [ 0.028643] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028655] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028692] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028740] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028756] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028772] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028788] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028804] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028825] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028841] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028858] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028874] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028890] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028906] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028922] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028938] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028957] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028973] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028989] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.029006] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.029022] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.029038] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.029046] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.029048] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.029049] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.029050] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.029051] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.029052] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.029053] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.029054] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.029055] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.029056] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.029057] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.029058] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.029059] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.029060] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.029061] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.029062] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.029063] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.029064] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.029065] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.029065] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.029111] Setting APIC routing to Xen PV. [ 0.033049] Zone ranges: [ 0.033050] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.033052] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.033054] Normal empty [ 0.033055] Movable zone start for each node [ 0.033056] Early memory node ranges [ 0.033057] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.033058] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.033060] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.033065] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.033100] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034647] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034652] p2m virtual area at (____ptrval____), size is 40000000 [ 0.222141] Remapped 102 page(s) [ 0.223513] ACPI: PM-Timer IO Port: 0x408 [ 0.223571] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223574] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223576] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223577] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223579] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223580] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223582] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223584] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223612] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223626] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223630] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223657] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223662] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223731] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223746] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223748] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223750] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223752] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223756] Booting kernel on Xen [ 0.223757] Xen version: 4.20-unstable (preserve-AD) [ 0.223761] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229993] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.230277] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.230284] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.230287] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230364] xen: PV spinlocks enabled [ 0.230367] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230372] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230374] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230411] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230420] random: crng init done [ 0.230469] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230494] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231812] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231815] software IO TLB: area num 8. [ 0.291214] Memory: 389288K/524284K available (14349K kernel code, 2686K rwdata, 4584K rodata, 1580K init, 1288K bss, 134744K reserved, 0K cma-reserved) [ 0.291384] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.293883] Dynamic Preempt: voluntary [ 0.293983] rcu: Preemptible hierarchical RCU implementation. [ 0.293984] rcu: RCU event tracing is enabled. [ 0.293985] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.293986] Trampoline variant of Tasks RCU enabled. [ 0.293988] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.293989] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.304474] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.304597] xen:events: Using FIFO-based ABI [ 0.304621] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.304629] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.304637] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.304644] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.304651] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.304659] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.304666] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.304673] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.304681] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.304688] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.304696] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.304703] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.304711] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.304719] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.304727] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.304737] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.310108] Console: colour VGA+ 80x25 [ 0.324823] printk: console [tty0] enabled [ 0.326148] printk: console [hvc0] enabled [ 0.326288] ACPI: Core revision 20220331 [ 0.341784] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.341949] Xen: using vcpuop timer interface [ 0.341957] installing Xen timer for CPU 0 [ 0.342106] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.342264] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199998) [ 0.342591] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.342707] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.342834] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.342982] Spectre V2 : Mitigation: Retpolines [ 0.343270] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.343424] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.343543] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.343664] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.343811] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.343929] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.344080] MDS: Mitigation: Clear CPU buffers [ 0.344193] TAA: Mitigation: Clear CPU buffers [ 0.344268] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.344433] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.344578] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.344703] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.344821] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.344940] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.362602] Freeing SMP alternatives memory: 40K [ 0.362728] pid_max: default: 32768 minimum: 301 [ 0.363286] LSM: Security Framework initializing [ 0.363408] SELinux: Initializing. [ 0.363547] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363701] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364356] cpu 0 spinlock event irq 25 [ 0.364476] VPMU disabled by hypervisor. [ 0.364910] cblist_init_generic: Setting adjustable number of callback queues. [ 0.365056] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.365213] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.365269] signal: max sigframe size: 1776 [ 0.365434] rcu: Hierarchical SRCU implementation. [ 0.365558] rcu: Max phase no-delay instances is 400. [ 0.366050] smp: Bringing up secondary CPUs ... [ 0.366386] installing Xen timer for CPU 1 [ 0.366855] cpu 1 spinlock event irq 35 [ 0.367405] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.367573] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.367760] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.368488] installing Xen timer for CPU 2 [ 0.368943] cpu 2 spinlock event irq 41 [ 0.369340] installing Xen timer for CPU 3 [ 0.369808] cpu 3 spinlock event irq 47 [ 0.369808] installing Xen timer for CPU 4 [ 0.370605] cpu 4 spinlock event irq 53 [ 0.370605] installing Xen timer for CPU 5 [ 0.371435] cpu 5 spinlock event irq 59 [ 0.371471] installing Xen timer for CPU 6 [ 0.372308] cpu 6 spinlock event irq 65 [ 0.372525] installing Xen timer for CPU 7 [ 0.372954] cpu 7 spinlock event irq 71 [ 0.373503] smp: Brought up 1 node, 8 CPUs [ 0.373629] smpboot: Max logical packages: 1 [ 0.373848] devtmpfs: initialized [ 0.373848] x86/mm: Memory block size: 128MB [ 0.374497] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.374534] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.374696] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.374948] PM: RTC time: 16:44:14, date: 2024-10-01 [ 0.375521] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.375667] xen:grant_table: Grant tables using version 1 layout [ 0.375803] Grant table initialized [ 0.376106] audit: initializing netlink subsys (disabled) [ 0.376287] audit: type=2000 audit(1727801055.066:1): state=initialized audit_enabled=0 res=1 [ 0.376336] thermal_sys: Registered thermal governor 'step_wise' [ 0.376336] thermal_sys: Registered thermal governor 'user_space' [ 0.376464] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.376888] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.377271] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.503753] PCI: Using configuration type 1 for base access [ 0.506385] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.507330] ACPI: Added _OSI(Module Device) [ 0.507330] ACPI: Added _OSI(Processor Device) [ 0.507382] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.507496] ACPI: Added _OSI(Processor Aggregator Device) [ 0.537507] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.539492] xen: registering gsi 9 triggering 0 polarity 0 [ 0.542115] ACPI: Dynamic OEM Table Load: [ 0.549134] ACPI: Interpreter enabled [ 0.549270] ACPI: PM: (supports S0 S4 S5) [ 0.549383] ACPI: Using IOAPIC for interrupt routing [ 0.549534] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.549683] PCI: Using E820 reservations for host bridge windows [ 0.550258] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.585926] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.586057] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.586304] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.586566] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.586686] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.586864] PCI host bridge to bus 0000:ff [ 0.586976] pci_bus 0000:ff: root bus resource [bus ff] [ 0.587169] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.587596] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.588022] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.588444] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.588883] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.588883] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.588931] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.589262] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.589262] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.589262] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.590571] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.590998] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.591422] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.592031] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.592642] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.593067] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.593490] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.593916] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.594169] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.594608] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.595084] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.595555] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.596021] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.596749] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.597222] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.597630] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.598067] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.598501] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.598974] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.599644] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.600134] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.600792] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.601223] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.601573] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.601996] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.602426] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.602892] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.603359] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.603825] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.604443] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.604867] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.605293] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.605728] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.605975] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.606412] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.606840] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.607471] pci_bus 0000:ff: on NUMA node 0 [ 0.611951] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.612248] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.612397] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.612741] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.612860] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.613348] PCI host bridge to bus 0000:00 [ 0.613462] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.613590] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.613710] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.613854] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.613998] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.614177] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.614787] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.615491] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.616043] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.616565] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.616956] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.617470] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.617826] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.618343] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.618718] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.619240] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.619513] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.620245] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.620651] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.621261] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.621790] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.622262] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.622262] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.622262] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.623493] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.623710] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.624177] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.624453] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.624670] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.625131] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.625493] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.625689] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.626222] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.626466] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.627017] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.627216] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.627275] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.635436] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.635989] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.636184] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.636275] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.636571] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.637124] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.637320] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.637442] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.637729] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.638302] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.638496] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.638617] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.638939] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.639141] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.639676] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.639995] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.640746] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.640940] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.641097] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.641255] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.641415] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.641572] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.641733] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.642048] pci 0000:00:1f.2: PME# supported from D3hot [ 0.642334] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.642551] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.642795] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.643171] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.643365] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.644078] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.644370] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.644701] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.644913] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.645662] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.645875] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.646589] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.646801] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.646801] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.646801] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.647262] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.647262] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.647262] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.647262] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.648386] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.648569] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.648920] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.649140] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.649261] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.649468] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.649588] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.650157] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.650361] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.650656] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.650840] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.651188] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.651350] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.651471] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.651674] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.651794] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.652384] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.652518] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.652656] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.652944] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.653235] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.653521] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.653641] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.653847] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.654063] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.654228] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.654682] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.655144] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.655272] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.655400] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.655753] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.655877] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.656084] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.656301] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.656466] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.656994] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.657463] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.657588] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.657716] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.658053] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.658443] pci 0000:09:00.0: enabling Extended Tags [ 0.658790] pci 0000:09:00.0: supports D1 D2 [ 0.658903] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.659257] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.659384] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.659512] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.659813] pci_bus 0000:0a: extended config space not accessible [ 0.659990] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.660195] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.660319] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.660486] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.660838] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.661127] pci 0000:0a:00.0: supports D1 D2 [ 0.661243] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.661692] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.661830] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.661960] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.662350] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.662550] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.662764] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.662925] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.663437] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.663671] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.663815] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.664038] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.664181] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.664673] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.664873] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.665082] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.665243] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.665658] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.665886] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.666030] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.666247] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.666267] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.666791] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.666991] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.667199] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.667312] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.667840] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.668069] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.668212] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.668330] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.668474] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.668990] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.669196] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.670357] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.670518] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.671031] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.671259] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.671259] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.671259] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.671259] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.671262] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.671262] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.671262] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.671262] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.671262] pci_bus 0000:00: on NUMA node 0 [ 0.672309] xen: registering gsi 13 triggering 1 polarity 0 [ 0.673275] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.673471] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.673661] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.673850] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.674039] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.674157] ACPI: PCI: Interrupt link LNKE disabled [ 0.674339] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.674457] ACPI: PCI: Interrupt link LNKF disabled [ 0.674646] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.674764] ACPI: PCI: Interrupt link LNKG disabled [ 0.674948] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.675066] ACPI: PCI: Interrupt link LNKH disabled [ 0.675334] xen:balloon: Initialising balloon driver [ 0.676357] iommu: Default domain type: Translated [ 0.683269] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.683454] SCSI subsystem initialized [ 0.684285] libata version 3.00 loaded. [ 0.684305] ACPI: bus type USB registered [ 0.684431] usbcore: registered new interface driver usbfs [ 0.684553] usbcore: registered new interface driver hub [ 0.684678] usbcore: registered new device driver usb [ 0.684812] pps_core: LinuxPPS API ver. 1 registered [ 0.684812] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.684812] PTP clock support registered [ 0.685311] Advanced Linux Sound Architecture Driver Initialized. [ 0.685560] NetLabel: Initializing [ 0.685671] NetLabel: domain hash size = 128 [ 0.685783] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.685783] NetLabel: unlabeled traffic allowed by default [ 0.685783] PCI: Using ACPI for IRQ routing [ 0.720677] PCI: pci_cache_line_size set to 64 bytes [ 0.721453] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.721456] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.721479] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.721479] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.721549] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.721697] vgaarb: loaded [ 0.724265] clocksource: Switched to clocksource tsc-early [ 0.732625] VFS: Disk quotas dquot_6.6.0 [ 0.732761] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.732907] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.733074] pnp: PnP ACPI init [ 0.733576] xen: registering gsi 8 triggering 1 polarity 0 [ 0.733737] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.733861] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.733980] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.734098] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.734216] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.734353] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.734480] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.734600] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.734720] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.734840] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.734960] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.735079] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.735199] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.735630] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.735753] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.735878] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.735996] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.736114] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.736557] xen: registering gsi 4 triggering 1 polarity 0 [ 0.736563] Already setup the GSI :4 [ 0.736675] pnp 00:03: [dma 0 disabled] [ 0.736985] xen: registering gsi 3 triggering 1 polarity 0 [ 0.736996] pnp 00:04: [dma 0 disabled] [ 0.737580] pnp: PnP ACPI: found 5 devices [ 0.768649] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.768802] NET: Registered PF_INET protocol family [ 0.768962] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.769346] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.769497] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.769643] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.769793] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.769966] TCP: Hash tables configured (established 4096 bind 4096) [ 0.770108] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.770229] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.770433] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.770831] RPC: Registered named UNIX socket transport module. [ 0.770957] RPC: Registered udp transport module. [ 0.771070] RPC: Registered tcp transport module. [ 0.771183] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.771754] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.771945] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.772108] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.772284] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.772444] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.772621] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.772794] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.772928] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.773089] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.773219] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.773414] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.773560] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.773705] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.773827] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.773971] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.774114] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.774260] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.774401] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.774549] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.774711] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.774855] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.774977] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.775121] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.775277] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.775432] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.775569] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.775702] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.775873] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.776075] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.776249] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.776393] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.776534] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.776695] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.776814] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.776952] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.777114] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.777234] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.777426] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.777593] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.777713] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.777852] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.778016] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.778173] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.778352] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.778507] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.778660] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.778845] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.778997] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.779150] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.779318] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.779453] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.779593] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.779727] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.779900] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.780049] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.780202] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.780341] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.780471] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.780592] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.780711] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.780830] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.780974] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.781090] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.781208] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.781345] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.781473] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.781620] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.781740] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.781855] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.781974] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.782090] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.782208] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.782763] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.782987] xen: registering gsi 19 triggering 0 polarity 1 [ 0.783013] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.791788] xen: registering gsi 18 triggering 0 polarity 1 [ 0.791807] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.808502] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 16373 usecs [ 0.808745] xen: registering gsi 18 triggering 0 polarity 1 [ 0.808751] Already setup the GSI :18 [ 0.825612] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 16525 usecs [ 0.825828] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.826002] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.826074] Unpacking initramfs... [ 0.826122] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.826481] kvm: no hardware support for 'kvm_intel' [ 0.834282] has_svm: not amd or hygon [ 0.834418] kvm: no hardware support for 'kvm_amd' [ 0.834536] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.834780] clocksource: Switched to clocksource tsc [ 0.837477] Initialise system trusted keyrings [ 0.837751] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.839283] NFS: Registering the id_resolver key type [ 0.839410] Key type id_resolver registered [ 0.839521] Key type id_legacy registered [ 0.839737] 9p: Installing v9fs 9p2000 file system support [ 0.853823] Key type asymmetric registered [ 0.853949] Asymmetric key parser 'x509' registered [ 0.854086] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.854241] io scheduler mq-deadline registered [ 0.854355] io scheduler kyber registered [ 0.855382] xen: registering gsi 16 triggering 0 polarity 1 [ 0.855411] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.855999] xen: registering gsi 16 triggering 0 polarity 1 [ 0.856005] Already setup the GSI :16 [ 0.856661] xen: registering gsi 16 triggering 0 polarity 1 [ 0.856666] Already setup the GSI :16 [ 0.856986] xen: registering gsi 16 triggering 0 polarity 1 [ 0.856990] Already setup the GSI :16 [ 0.857307] xen: registering gsi 16 triggering 0 polarity 1 [ 0.857311] Already setup the GSI :16 [ 0.857953] xen: registering gsi 16 triggering 0 polarity 1 [ 0.857958] Already setup the GSI :16 [ 0.858574] xen: registering gsi 16 triggering 0 polarity 1 [ 0.858582] Already setup the GSI :16 [ 0.859038] xen: registering gsi 17 triggering 0 polarity 1 [ 0.859055] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.859413] xen: registering gsi 19 triggering 0 polarity 1 [ 0.859417] Already setup the GSI :19 [ 0.859907] xen: registering gsi 16 triggering 0 polarity 1 [ 0.859912] Already setup the GSI :16 [ 0.860599] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.860774] ACPI: button: Power Button [PWRB] [ 0.860918] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.861105] ACPI: button: Power Button [PWRF] [ 0.861355] Monitor-Mwait will be used to enter C-1 state [ 0.861368] Monitor-Mwait will be used to enter C-2 state [ 0.861375] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.861735] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.862119] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.870632] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.883684] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.884168] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.884902] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.885416] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.886273] xen:xen_evtchn: Event-channel device installed [ 0.886468] xen_pciback: backend is vpci [ 0.887227] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.887548] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.888230] hpet_acpi_add: no address or irqs in _CRS [ 0.888416] Non-volatile memory driver v1.3 [ 0.888541] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.891159] loop: module loaded [ 0.897761] ahci 0000:00:1f.2: version 3.0 [ 0.897867] xen: registering gsi 16 triggering 0 polarity 1 [ 0.897877] Already setup the GSI :16 [ 0.898213] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.898362] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.914184] scsi host0: ahci [ 0.914541] scsi host1: ahci [ 0.914930] scsi host2: ahci [ 0.915328] scsi host3: ahci [ 0.915686] scsi host4: ahci [ 0.916055] scsi host5: ahci [ 0.916208] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 0.916355] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 0.916499] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 0.916656] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 0.916800] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 0.916944] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 0.917511] tun: Universal TUN/TAP device driver, 1.6 [ 0.917846] e100: Intel(R) PRO/100 Network Driver [ 0.917967] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.918106] sky2: driver version 1.30 [ 0.918295] xen_netfront: Initialising Xen virtual ethernet driver [ 0.918675] xen: registering gsi 18 triggering 0 polarity 1 [ 0.918685] Already setup the GSI :18 [ 0.918919] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.919123] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.919299] ehci-pci 0000:00:1a.0: debug port 2 [ 0.923446] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.930616] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.930867] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.931016] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.931160] usb usb1: Product: EHCI Host Controller [ 0.931280] usb usb1: Manufacturer: Linux 6.1.112+ ehci_hcd [ 0.931401] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.931689] Freeing initrd memory: 20628K [ 0.931739] hub 1-0:1.0: USB hub found [ 0.931936] hub 1-0:1.0: 2 ports detected [ 0.932312] xen: registering gsi 18 triggering 0 polarity 1 [ 0.932321] Already setup the GSI :18 [ 0.932514] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.932735] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.932910] ehci-pci 0000:00:1d.0: debug port 2 [ 0.937014] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.943626] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.943944] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.944092] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.944236] usb usb2: Product: EHCI Host Controller [ 0.944350] usb usb2: Manufacturer: Linux 6.1.112+ ehci_hcd [ 0.944465] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.944709] hub 2-0:1.0: USB hub found [ 0.944833] hub 2-0:1.0: 2 ports detected [ 0.945211] xen: registering gsi 19 triggering 0 polarity 1 [ 0.945217] Already setup the GSI :19 [ 0.945409] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.945635] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.946849] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.947314] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.947524] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.947682] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.947888] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.948035] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.948178] usb usb3: Product: xHCI Host Controller [ 0.948292] usb usb3: Manufacturer: Linux 6.1.112+ xhci-hcd [ 0.948408] usb usb3: SerialNumber: 0000:00:14.0 [ 0.948694] hub 3-0:1.0: USB hub found [ 0.948826] hub 3-0:1.0: 8 ports detected [ 0.949943] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.950093] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.950237] usb usb4: Product: xHCI Host Controller [ 0.950351] usb usb4: Manufacturer: Linux 6.1.112+ xhci-hcd [ 0.950466] usb usb4: SerialNumber: 0000:00:14.0 [ 0.950720] hub 4-0:1.0: USB hub found [ 0.950852] hub 4-0:1.0: 6 ports detected [ 0.951929] usbcore: registered new interface driver usblp [ 0.952070] usbcore: registered new interface driver usb-storage [ 0.952239] i8042: PNP: No PS/2 controller found. [ 0.952593] rtc_cmos 00:00: RTC can wake from S4 [ 0.953242] rtc_cmos 00:00: registered as rtc0 [ 0.953401] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.953608] device-mapper: uevent: version 1.0.3 [ 0.953713] xen: registering gsi 18 triggering 0 polarity 1 [ 0.953729] Already setup the GSI :18 [ 0.953804] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.953874] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.953994] intel_pstate: CPU model not supported [ 0.954025] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.954125] hid: raw HID events driver (C) Jiri Kosina [ 0.954593] usbcore: registered new interface driver usbhid [ 0.954688] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.954710] usbhid: USB HID core driver [ 0.955391] Initializing XFRM netlink socket [ 0.955677] NET: Registered PF_INET6 protocol family [ 0.956317] Segment Routing with IPv6 [ 0.956439] In-situ OAM (IOAM) with IPv6 [ 0.956610] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.956918] NET: Registered PF_PACKET protocol family [ 0.957074] 9pnet: Installing 9P2000 support [ 0.957200] Key type dns_resolver registered [ 0.958025] IPI shorthand broadcast: enabled [ 0.958163] sched_clock: Marking stable (920427285, 37522547)->(1804979101, -847029269) [ 0.958767] registered taskstats version 1 [ 0.958884] Loading compiled-in X.509 certificates [ 0.961481] PM: Magic number: 12:480:741 [ 0.961724] acpi LNXCPU:3d: hash matches [ 0.961845] workqueue writeback: hash matches [ 0.961968] printk: console [netcon0] enabled [ 0.962081] netconsole: network logging started [ 0.962417] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.974322] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.974675] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.975330] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.975506] ALSA device list: [ 0.983266] No soundcards found. [ 1.167609] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.183627] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.191652] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.228583] ata5: SATA link down (SStatus 0 SControl 300) [ 1.228723] ata4: SATA link down (SStatus 0 SControl 300) [ 1.228881] ata1: SATA link down (SStatus 0 SControl 300) [ 1.229037] ata2: SATA link down (SStatus 0 SControl 300) [ 1.229187] ata6: SATA link down (SStatus 0 SControl 300) [ 1.229348] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.230592] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.296141] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.296296] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.296690] hub 1-1:1.0: USB hub found [ 1.296888] hub 1-1:1.0: 4 ports detected [ 1.312167] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.312322] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.312669] hub 2-1:1.0: USB hub found [ 1.312890] hub 2-1:1.0: 4 ports detected [ 1.316012] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.316142] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.319268] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.319422] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.319566] usb 3-3: Product: USB2.0 Hub [ 1.320368] hub 3-3:1.0: USB hub found [ 1.320838] hub 3-3:1.0: 4 ports detected [ 1.343943] ata3.00: configured for UDMA/133 [ 1.344280] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.345168] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.345226] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.345478] sd 2:0:0:0: [sda] Write Protect is off [ 1.345615] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.345676] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.345913] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.365171] sda: sda1 sda2 < sda5 > [ 1.365646] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.366857] Freeing unused kernel image (initmem) memory: 1580K [ 1.366985] Write protecting the kernel read-only data: 22528k [ 1.384856] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.386136] Freeing unused kernel image (rodata/data gap) memory: 1560K [ 1.437565] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.563811] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.563963] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.564634] hub 3-4:1.0: USB hub found [ 1.564846] hub 3-4:1.0: 4 ports detected [ 1.627567] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.705008] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.705163] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.705308] usb 3-3.2: Product: USB2.0 Hub [ 1.705987] hub 3-3.2:1.0: USB hub found [ 1.706431] hub 3-3.2:1.0: 4 ports detected [ 1.847064] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.847192] Run /init as init process [ 1.847303] with arguments: [ 1.847304] /init [ 1.847305] placeholder [ 1.847306] with environment: [ 1.847307] HOME=/ [ 1.847308] TERM=linux [ 1.857574] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.962077] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.962237] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.968000] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 2.278478] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.278687] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.279097] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.279416] xen: registering gsi 16 triggering 0 polarity 1 [ 2.279432] Already setup the GSI :16 [ 2.280802] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 2.282122] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 2.282399] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.284446] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.284623] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.284946] xen: registering gsi 16 triggering 0 polarity 1 [ 2.284957] Already setup the GSI :16 [ 2.312733] pps pps0: new PPS source ptp0 [ 2.312916] igb 0000:07:00.0: added PHC on eth0 [ 2.313049] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.313170] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.313335] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.313450] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.313690] xen: registering gsi 17 triggering 0 polarity 1 [ 2.313699] Already setup the GSI :17 [ 2.343213] pps pps1: new PPS source ptp1 [ 2.343411] igb 0000:08:00.0: added PHC on eth1 [ 2.343556] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.343677] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.343842] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.343957] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.344181] xen: registering gsi 16 triggering 0 polarity 1 [ 2.344188] Already setup the GSI :16 [ 2.402310] igb 0000:0b:00.0: added PHC on eth2 [ 2.402463] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.402603] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.402807] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.402922] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.403147] xen: registering gsi 17 triggering 0 polarity 1 [ 2.403155] Already setup the GSI :17 [ 2.458498] igb 0000:0b:00.1: added PHC on eth3 [ 2.458648] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.458770] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.458973] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.459089] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.459313] xen: registering gsi 18 triggering 0 polarity 1 [ 2.459321] Already setup the GSI :18 [ 2.517230] igb 0000:0b:00.2: added PHC on eth4 [ 2.517372] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.517493] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.517750] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.517865] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.518109] xen: registering gsi 19 triggering 0 polarity 1 [ 2.518119] Already setup the GSI :19 [ 2.573206] igb 0000:0b:00.3: added PHC on eth5 [ 2.573345] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.573466] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.573678] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.573794] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.576307] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.589070] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.596867] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.609906] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.617673] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.632118] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 3.018868] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.147272] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.147397] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.443183] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.443547] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.443768] xen: registering gsi 17 triggering 0 polarity 1 [ 3.443779] Already setup the GSI :17 [ 4.185169] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.314747] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.314900] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.611561] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.614021] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.623129] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 5.024149] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.032325] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.590690] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.702144] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.726956] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.805572] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.361312] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.361478] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.361672] device enx0cc47a9f87be entered promiscuous mode [ 14.853185] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 14.957894] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 14.958149] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 14.958271] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 14.958567] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready