[ 0.000000] Linux version 6.1.112+ (osstest@chardonnay0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Tue Oct 1 13:56:52 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000459] tsc: Detected 2199.998 MHz processor [ 0.000902] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000905] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000912] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000914] Disabled [ 0.000915] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000919] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000958] Kernel/User page tables isolation: disabled on XEN PV. [ 0.028030] RAMDISK: [mem 0x04000000-0x05424fff] [ 0.028039] ACPI: Early table checksum verification disabled [ 0.028637] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028649] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028685] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028734] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028750] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028766] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028782] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028798] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028818] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028835] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028851] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028867] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028883] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028900] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028916] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028932] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028948] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028968] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028984] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.029000] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.029016] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.029032] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.029041] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.029043] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.029044] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.029045] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.029046] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.029047] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.029048] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.029049] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.029050] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.029051] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.029052] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.029053] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.029054] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.029055] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.029056] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.029056] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.029057] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.029058] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.029059] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.029060] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.029105] Setting APIC routing to Xen PV. [ 0.033048] Zone ranges: [ 0.033049] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.033052] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.033053] Normal empty [ 0.033055] Movable zone start for each node [ 0.033055] Early memory node ranges [ 0.033056] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.033057] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.033059] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.033064] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.033099] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034649] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034653] p2m virtual area at (____ptrval____), size is 40000000 [ 0.222146] Remapped 102 page(s) [ 0.223520] ACPI: PM-Timer IO Port: 0x408 [ 0.223573] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223576] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223578] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223580] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223581] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223582] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223584] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223585] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223613] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223626] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223629] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223655] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223660] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223729] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223744] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223747] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223748] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223750] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223755] Booting kernel on Xen [ 0.223755] Xen version: 4.20-unstable (preserve-AD) [ 0.223759] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229979] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.230263] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.230269] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.230273] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230351] xen: PV spinlocks enabled [ 0.230354] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230359] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230361] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230398] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230408] random: crng init done [ 0.230456] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230481] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231812] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231815] software IO TLB: area num 8. [ 0.292411] Memory: 389288K/524284K available (14349K kernel code, 2686K rwdata, 4584K rodata, 1580K init, 1288K bss, 134744K reserved, 0K cma-reserved) [ 0.292657] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.296264] Dynamic Preempt: voluntary [ 0.296435] rcu: Preemptible hierarchical RCU implementation. [ 0.296438] rcu: RCU event tracing is enabled. [ 0.296439] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.296442] Trampoline variant of Tasks RCU enabled. [ 0.296444] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.296445] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.308565] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.308707] xen:events: Using FIFO-based ABI [ 0.308732] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.308740] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.308748] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.308755] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.308762] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.308770] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.308777] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.308784] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.308791] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.308799] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.308807] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.308824] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.308831] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.308840] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.308848] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.308859] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.314222] Console: colour VGA+ 80x25 [ 0.329011] printk: console [tty0] enabled [ 0.330275] printk: console [hvc0] enabled [ 0.330395] ACPI: Core revision 20220331 [ 0.344375] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.344537] Xen: using vcpuop timer interface [ 0.344542] installing Xen timer for CPU 0 [ 0.344695] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.344853] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199998) [ 0.345178] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.345295] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.345422] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.345571] Spectre V2 : Mitigation: Retpolines [ 0.345859] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.346005] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.346132] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.346253] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.346401] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.346519] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.346671] MDS: Mitigation: Clear CPU buffers [ 0.346784] TAA: Mitigation: Clear CPU buffers [ 0.346857] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.347023] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.347168] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.347287] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.347408] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.347550] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.365169] Freeing SMP alternatives memory: 40K [ 0.365295] pid_max: default: 32768 minimum: 301 [ 0.365875] LSM: Security Framework initializing [ 0.365997] SELinux: Initializing. [ 0.366136] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.366283] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.366944] cpu 0 spinlock event irq 25 [ 0.367064] VPMU disabled by hypervisor. [ 0.367499] cblist_init_generic: Setting adjustable number of callback queues. [ 0.367646] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.367802] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.367858] signal: max sigframe size: 1776 [ 0.368020] rcu: Hierarchical SRCU implementation. [ 0.368149] rcu: Max phase no-delay instances is 400. [ 0.368636] smp: Bringing up secondary CPUs ... [ 0.368972] installing Xen timer for CPU 1 [ 0.369444] cpu 1 spinlock event irq 35 [ 0.369994] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.370163] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.370351] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.371077] installing Xen timer for CPU 2 [ 0.371556] cpu 2 spinlock event irq 41 [ 0.371928] installing Xen timer for CPU 3 [ 0.372380] cpu 3 spinlock event irq 47 [ 0.372380] installing Xen timer for CPU 4 [ 0.373193] cpu 4 spinlock event irq 53 [ 0.373193] installing Xen timer for CPU 5 [ 0.374023] cpu 5 spinlock event irq 59 [ 0.374061] installing Xen timer for CPU 6 [ 0.374897] cpu 6 spinlock event irq 65 [ 0.375114] installing Xen timer for CPU 7 [ 0.375543] cpu 7 spinlock event irq 71 [ 0.376087] smp: Brought up 1 node, 8 CPUs [ 0.376239] smpboot: Max logical packages: 1 [ 0.376458] devtmpfs: initialized [ 0.376458] x86/mm: Memory block size: 128MB [ 0.377193] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.377193] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.377280] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.377969] PM: RTC time: 16:23:08, date: 2024-10-01 [ 0.378215] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.378361] xen:grant_table: Grant tables using version 1 layout [ 0.378498] Grant table initialized [ 0.378801] audit: initializing netlink subsys (disabled) [ 0.378903] audit: type=2000 audit(1727799788.891:1): state=initialized audit_enabled=0 res=1 [ 0.378927] thermal_sys: Registered thermal governor 'step_wise' [ 0.378927] thermal_sys: Registered thermal governor 'user_space' [ 0.379053] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.379477] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.379864] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.506532] PCI: Using configuration type 1 for base access [ 0.509160] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.509914] ACPI: Added _OSI(Module Device) [ 0.510032] ACPI: Added _OSI(Processor Device) [ 0.510146] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.510259] ACPI: Added _OSI(Processor Aggregator Device) [ 0.539498] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.541481] xen: registering gsi 9 triggering 0 polarity 0 [ 0.544232] ACPI: Dynamic OEM Table Load: [ 0.551866] ACPI: Interpreter enabled [ 0.552000] ACPI: PM: (supports S0 S4 S5) [ 0.552117] ACPI: Using IOAPIC for interrupt routing [ 0.552265] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.552415] PCI: Using E820 reservations for host bridge windows [ 0.553023] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.585988] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.586118] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.586362] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.586626] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.586752] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.586888] PCI host bridge to bus 0000:ff [ 0.587001] pci_bus 0000:ff: root bus resource [bus ff] [ 0.587195] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.587645] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.588073] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.588495] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.588936] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.589386] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.589806] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.590159] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.590614] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.591053] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.591474] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.591900] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.592326] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.592747] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.593175] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.593599] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.594025] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.594452] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.594706] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.595168] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.595639] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.596111] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.596582] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.597050] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.597522] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.597982] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.598405] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.598843] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.599313] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.599779] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.600204] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.600661] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.601084] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.601510] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.601936] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.602368] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.602834] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.603204] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.603670] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.604186] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.604610] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.605034] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.605462] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.605711] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.606149] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.606577] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.607011] pci_bus 0000:ff: on NUMA node 0 [ 0.613159] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.613290] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.613568] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.613916] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.614037] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.614526] PCI host bridge to bus 0000:00 [ 0.614640] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.614762] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.614857] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.615002] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.615147] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.615326] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.615969] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.616490] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.616860] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.617386] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.617774] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.618267] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.618667] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.619187] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.619577] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.620108] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.620503] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.621026] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.621434] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.622013] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.622650] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.623325] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.623543] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.624008] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.624353] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.624570] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.625032] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.625338] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.625555] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.626020] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.626378] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.626578] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.627114] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.627429] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.627980] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.628180] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.628302] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.636026] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.636586] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.636781] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.636865] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.637154] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.637711] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.637905] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.638026] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.638310] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.638866] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.639065] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.639186] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.639508] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.639706] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.640244] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.640563] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.641313] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.641507] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.641671] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.641829] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.641898] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.642055] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.642212] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.642524] pci 0000:00:1f.2: PME# supported from D3hot [ 0.642805] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.642954] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.643198] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.643576] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.643794] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.644453] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.644746] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.645074] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.645286] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.646034] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.646247] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.646955] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.647168] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.647869] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.648082] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.648790] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.648875] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.649215] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.649427] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.649716] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.649896] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.650245] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.650466] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.650588] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.650792] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.650856] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.651427] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.651640] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.651924] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.652108] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.652463] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.652666] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.652787] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.652906] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.653027] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.653581] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.653715] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.653856] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.654146] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.654437] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.654798] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.654856] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.655063] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.655279] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.655444] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.655973] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.656452] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.656578] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.656706] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.657062] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.657182] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.657388] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.657608] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.657773] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.658269] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.658731] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.658856] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.658992] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.659330] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.659722] pci 0000:09:00.0: enabling Extended Tags [ 0.660061] pci 0000:09:00.0: supports D1 D2 [ 0.660175] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.660538] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.660665] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.660793] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.661038] pci_bus 0000:0a: extended config space not accessible [ 0.661209] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.661414] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.661583] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.661756] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.662092] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.662382] pci 0000:0a:00.0: supports D1 D2 [ 0.662495] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.662937] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.663093] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.663222] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.663609] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.663809] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.663945] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.664107] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.664625] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.664856] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.665001] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.665219] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.665364] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.665937] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.666138] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.666347] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.666508] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.667037] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.667266] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.667411] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.667628] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.667772] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.668226] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.668434] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.668642] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.668803] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.669247] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.669476] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.669627] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.669844] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.669989] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.670506] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.670707] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.670915] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.671083] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.671593] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.671821] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.671856] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.672074] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.672218] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.672828] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.672866] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.672995] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.673134] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.673605] pci_bus 0000:00: on NUMA node 0 [ 0.673700] xen: registering gsi 13 triggering 1 polarity 0 [ 0.674659] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.674857] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.675056] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.675245] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.675434] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.675552] ACPI: PCI: Interrupt link LNKE disabled [ 0.675735] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.675856] ACPI: PCI: Interrupt link LNKF disabled [ 0.676042] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.676160] ACPI: PCI: Interrupt link LNKG disabled [ 0.676347] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.676465] ACPI: PCI: Interrupt link LNKH disabled [ 0.676729] xen:balloon: Initialising balloon driver [ 0.676948] iommu: Default domain type: Translated [ 0.683859] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.684046] SCSI subsystem initialized [ 0.684889] libata version 3.00 loaded. [ 0.684894] ACPI: bus type USB registered [ 0.685021] usbcore: registered new interface driver usbfs [ 0.685143] usbcore: registered new interface driver hub [ 0.685264] usbcore: registered new device driver usb [ 0.685391] pps_core: LinuxPPS API ver. 1 registered [ 0.685857] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.686013] PTP clock support registered [ 0.686149] Advanced Linux Sound Architecture Driver Initialized. [ 0.686149] NetLabel: Initializing [ 0.686261] NetLabel: domain hash size = 128 [ 0.686373] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.686874] NetLabel: unlabeled traffic allowed by default [ 0.687013] PCI: Using ACPI for IRQ routing [ 0.721385] PCI: pci_cache_line_size set to 64 bytes [ 0.722160] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.722163] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.722187] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.722187] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.722187] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.722286] vgaarb: loaded [ 0.724855] clocksource: Switched to clocksource tsc-early [ 0.724930] VFS: Disk quotas dquot_6.6.0 [ 0.725218] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.725363] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.725530] pnp: PnP ACPI init [ 0.726039] xen: registering gsi 8 triggering 1 polarity 0 [ 0.726236] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.726364] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.726483] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.726601] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.726719] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.726837] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.726983] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.727107] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.727227] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.727347] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.727467] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.727587] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.727707] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.728139] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.728270] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.728395] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.728514] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.728632] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.729079] xen: registering gsi 4 triggering 1 polarity 0 [ 0.729085] Already setup the GSI :4 [ 0.729197] pnp 00:03: [dma 0 disabled] [ 0.729508] xen: registering gsi 3 triggering 1 polarity 0 [ 0.729520] pnp 00:04: [dma 0 disabled] [ 0.730112] pnp: PnP ACPI: found 5 devices [ 0.761913] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.762084] NET: Registered PF_INET protocol family [ 0.762246] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.762611] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.762762] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.762991] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.763171] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.763344] TCP: Hash tables configured (established 4096 bind 4096) [ 0.763488] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.763611] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.763765] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.764152] RPC: Registered named UNIX socket transport module. [ 0.764279] RPC: Registered udp transport module. [ 0.764418] RPC: Registered tcp transport module. [ 0.764532] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.765049] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.765223] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.765387] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.765549] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.765699] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.765918] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.766105] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.766239] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.766402] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.766526] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.766671] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.766815] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.766981] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.767118] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.767263] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.767406] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.767552] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.767674] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.767819] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.767985] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.768133] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.768255] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.768400] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.768548] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.768694] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.768829] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.768988] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.769162] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.769335] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.769508] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.769628] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.769767] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.769969] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.770091] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.770232] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.770394] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.770514] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.770655] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.770820] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.770967] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.771108] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.771291] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.771450] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.771603] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.771756] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.771931] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.772094] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.772247] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.772399] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.772553] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.772680] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.772819] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.772968] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.773142] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.773291] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.773410] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.773529] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.773649] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.773770] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.773901] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.774042] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.774188] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.774304] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.774423] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.774539] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.774658] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.774774] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.774913] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.775041] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.775161] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.775277] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.775398] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.775994] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.776216] xen: registering gsi 19 triggering 0 polarity 1 [ 0.776242] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.785024] xen: registering gsi 18 triggering 0 polarity 1 [ 0.785043] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.800057] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 14732 usecs [ 0.800302] xen: registering gsi 18 triggering 0 polarity 1 [ 0.800308] Already setup the GSI :18 [ 0.815198] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 14601 usecs [ 0.815409] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.815583] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.815656] Unpacking initramfs... [ 0.815702] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.816065] kvm: no hardware support for 'kvm_intel' [ 0.823826] has_svm: not amd or hygon [ 0.823967] kvm: no hardware support for 'kvm_amd' [ 0.824091] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.824369] clocksource: Switched to clocksource tsc [ 0.827099] Initialise system trusted keyrings [ 0.827407] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.828955] NFS: Registering the id_resolver key type [ 0.829098] Key type id_resolver registered [ 0.829210] Key type id_legacy registered [ 0.829431] 9p: Installing v9fs 9p2000 file system support [ 0.843419] Key type asymmetric registered [ 0.843552] Asymmetric key parser 'x509' registered [ 0.843689] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.843843] io scheduler mq-deadline registered [ 0.843957] io scheduler kyber registered [ 0.844863] xen: registering gsi 16 triggering 0 polarity 1 [ 0.844892] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.845479] xen: registering gsi 16 triggering 0 polarity 1 [ 0.845485] Already setup the GSI :16 [ 0.846096] xen: registering gsi 16 triggering 0 polarity 1 [ 0.846102] Already setup the GSI :16 [ 0.846424] xen: registering gsi 16 triggering 0 polarity 1 [ 0.846428] Already setup the GSI :16 [ 0.846746] xen: registering gsi 16 triggering 0 polarity 1 [ 0.846750] Already setup the GSI :16 [ 0.847344] xen: registering gsi 16 triggering 0 polarity 1 [ 0.847349] Already setup the GSI :16 [ 0.847917] xen: registering gsi 16 triggering 0 polarity 1 [ 0.847922] Already setup the GSI :16 [ 0.848374] xen: registering gsi 17 triggering 0 polarity 1 [ 0.848390] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.848733] xen: registering gsi 19 triggering 0 polarity 1 [ 0.848738] Already setup the GSI :19 [ 0.849193] xen: registering gsi 16 triggering 0 polarity 1 [ 0.849198] Already setup the GSI :16 [ 0.849865] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.850054] ACPI: button: Power Button [PWRB] [ 0.850197] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.850452] ACPI: button: Power Button [PWRF] [ 0.850736] Monitor-Mwait will be used to enter C-1 state [ 0.850771] Monitor-Mwait will be used to enter C-2 state [ 0.850788] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.851173] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.851536] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.851835] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.852162] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.860114] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.860608] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.868095] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.869053] xen:xen_evtchn: Event-channel device installed [ 0.869263] xen_pciback: backend is vpci [ 0.870022] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.870338] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.871096] hpet_acpi_add: no address or irqs in _CRS [ 0.871310] Non-volatile memory driver v1.3 [ 0.871424] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.873976] loop: module loaded [ 0.880667] ahci 0000:00:1f.2: version 3.0 [ 0.880775] xen: registering gsi 16 triggering 0 polarity 1 [ 0.880785] Already setup the GSI :16 [ 0.881134] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.881285] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.896600] scsi host0: ahci [ 0.897015] scsi host1: ahci [ 0.897376] scsi host2: ahci [ 0.897714] scsi host3: ahci [ 0.898088] scsi host4: ahci [ 0.898444] scsi host5: ahci [ 0.898591] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 0.898738] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 0.898883] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 0.899058] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 0.899203] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 0.899347] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 0.899786] tun: Universal TUN/TAP device driver, 1.6 [ 0.900064] e100: Intel(R) PRO/100 Network Driver [ 0.900188] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.900329] sky2: driver version 1.30 [ 0.900542] xen_netfront: Initialising Xen virtual ethernet driver [ 0.900924] xen: registering gsi 18 triggering 0 polarity 1 [ 0.900933] Already setup the GSI :18 [ 0.901158] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.901348] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.901525] ehci-pci 0000:00:1a.0: debug port 2 [ 0.905686] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.912049] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.912277] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.912426] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.912570] usb usb1: Product: EHCI Host Controller [ 0.912685] usb usb1: Manufacturer: Linux 6.1.112+ ehci_hcd [ 0.912808] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.913150] hub 1-0:1.0: USB hub found [ 0.913275] hub 1-0:1.0: 2 ports detected [ 0.913639] xen: registering gsi 18 triggering 0 polarity 1 [ 0.913648] Already setup the GSI :18 [ 0.913838] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.914053] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.914259] ehci-pci 0000:00:1d.0: debug port 2 [ 0.918381] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.923008] Freeing initrd memory: 20628K [ 0.925086] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.925338] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.925487] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.925631] usb usb2: Product: EHCI Host Controller [ 0.925746] usb usb2: Manufacturer: Linux 6.1.112+ ehci_hcd [ 0.925862] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.926167] hub 2-0:1.0: USB hub found [ 0.926291] hub 2-0:1.0: 2 ports detected [ 0.926725] xen: registering gsi 19 triggering 0 polarity 1 [ 0.926734] Already setup the GSI :19 [ 0.926937] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.927141] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.928359] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.928823] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.929044] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.929192] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.929395] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.929564] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.929709] usb usb3: Product: xHCI Host Controller [ 0.929823] usb usb3: Manufacturer: Linux 6.1.112+ xhci-hcd [ 0.929939] usb usb3: SerialNumber: 0000:00:14.0 [ 0.930229] hub 3-0:1.0: USB hub found [ 0.930361] hub 3-0:1.0: 8 ports detected [ 0.931489] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.931641] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.931785] usb usb4: Product: xHCI Host Controller [ 0.931899] usb usb4: Manufacturer: Linux 6.1.112+ xhci-hcd [ 0.932027] usb usb4: SerialNumber: 0000:00:14.0 [ 0.932287] hub 4-0:1.0: USB hub found [ 0.932419] hub 4-0:1.0: 6 ports detected [ 0.933503] usbcore: registered new interface driver usblp [ 0.933670] usbcore: registered new interface driver usb-storage [ 0.933840] i8042: PNP: No PS/2 controller found. [ 0.934138] rtc_cmos 00:00: RTC can wake from S4 [ 0.934759] rtc_cmos 00:00: registered as rtc0 [ 0.934914] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.935203] device-mapper: uevent: version 1.0.3 [ 0.935287] xen: registering gsi 18 triggering 0 polarity 1 [ 0.935325] Already setup the GSI :18 [ 0.935419] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.935470] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.935591] intel_pstate: CPU model not supported [ 0.935623] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.935722] hid: raw HID events driver (C) Jiri Kosina [ 0.936186] usbcore: registered new interface driver usbhid [ 0.936262] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.936304] usbhid: USB HID core driver [ 0.937029] Initializing XFRM netlink socket [ 0.937279] NET: Registered PF_INET6 protocol family [ 0.937842] Segment Routing with IPv6 [ 0.937962] In-situ OAM (IOAM) with IPv6 [ 0.938124] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.938365] NET: Registered PF_PACKET protocol family [ 0.938518] 9pnet: Installing 9P2000 support [ 0.938644] Key type dns_resolver registered [ 0.939414] IPI shorthand broadcast: enabled [ 0.939554] sched_clock: Marking stable (903382235, 35990225)->(3965600459, -3026227999) [ 0.940128] registered taskstats version 1 [ 0.940244] Loading compiled-in X.509 certificates [ 0.942853] PM: Magic number: 12:618:387 [ 0.943010] thermal cooling_device2: hash matches [ 0.943185] acpi LNXCPU:ba: hash matches [ 0.943328] printk: console [netcon0] enabled [ 0.943475] netconsole: network logging started [ 0.943811] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.955597] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.955939] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.956608] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.956784] ALSA device list: [ 0.964543] No soundcards found. [ 1.155108] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.163070] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.171075] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.208091] ata5: SATA link down (SStatus 0 SControl 300) [ 1.208243] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.208395] ata2: SATA link down (SStatus 0 SControl 300) [ 1.208552] ata6: SATA link down (SStatus 0 SControl 300) [ 1.208693] ata4: SATA link down (SStatus 0 SControl 300) [ 1.208849] ata1: SATA link down (SStatus 0 SControl 300) [ 1.209389] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.283499] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.283655] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.284037] hub 1-1:1.0: USB hub found [ 1.284247] hub 1-1:1.0: 4 ports detected [ 1.291625] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.291781] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.292171] hub 2-1:1.0: USB hub found [ 1.292374] hub 2-1:1.0: 4 ports detected [ 1.292698] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.292852] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.298534] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.298690] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.298814] usb 3-3: Product: USB2.0 Hub [ 1.299614] hub 3-3:1.0: USB hub found [ 1.300094] hub 3-3:1.0: 4 ports detected [ 1.320542] ata3.00: configured for UDMA/133 [ 1.320972] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.321553] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.321661] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.321886] sd 2:0:0:0: [sda] Write Protect is off [ 1.322036] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.322124] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.322360] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.341890] sda: sda1 sda2 < sda5 > [ 1.342261] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.343441] Freeing unused kernel image (initmem) memory: 1580K [ 1.343569] Write protecting the kernel read-only data: 22528k [ 1.361463] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.362745] Freeing unused kernel image (rodata/data gap) memory: 1560K [ 1.416041] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.542309] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.542468] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.543129] hub 3-4:1.0: USB hub found [ 1.543341] hub 3-4:1.0: 4 ports detected [ 1.606038] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.683407] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.683562] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.683707] usb 3-3.2: Product: USB2.0 Hub [ 1.684350] hub 3-3.2:1.0: USB hub found [ 1.684779] hub 3-3.2:1.0: 4 ports detected [ 1.826663] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.826791] Run /init as init process [ 1.826901] with arguments: [ 1.826902] /init [ 1.826903] placeholder [ 1.826904] with environment: [ 1.826905] HOME=/ [ 1.826906] TERM=linux [ 1.837056] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.941542] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.941708] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.948356] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 2.255387] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 2.258182] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 2.259651] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.267387] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.267559] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.267977] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.268221] xen: registering gsi 16 triggering 0 polarity 1 [ 2.268230] Already setup the GSI :16 [ 2.273072] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.273235] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.273502] xen: registering gsi 16 triggering 0 polarity 1 [ 2.273512] Already setup the GSI :16 [ 2.300653] pps pps0: new PPS source ptp0 [ 2.300894] igb 0000:07:00.0: added PHC on eth0 [ 2.301042] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.301163] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.301329] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.301444] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.301676] xen: registering gsi 17 triggering 0 polarity 1 [ 2.301684] Already setup the GSI :17 [ 2.331205] pps pps1: new PPS source ptp1 [ 2.331404] igb 0000:08:00.0: added PHC on eth1 [ 2.331538] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.331659] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.331824] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.331940] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.332179] xen: registering gsi 16 triggering 0 polarity 1 [ 2.332186] Already setup the GSI :16 [ 2.389844] igb 0000:0b:00.0: added PHC on eth2 [ 2.389984] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.390118] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.390321] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.390437] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.390664] xen: registering gsi 17 triggering 0 polarity 1 [ 2.390673] Already setup the GSI :17 [ 2.448744] igb 0000:0b:00.1: added PHC on eth3 [ 2.448886] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.449020] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.449220] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.449366] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.449608] xen: registering gsi 18 triggering 0 polarity 1 [ 2.449618] Already setup the GSI :18 [ 2.506648] igb 0000:0b:00.2: added PHC on eth4 [ 2.506802] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.506929] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.507151] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.507278] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.507528] xen: registering gsi 19 triggering 0 polarity 1 [ 2.507537] Already setup the GSI :19 [ 2.565018] igb 0000:0b:00.3: added PHC on eth5 [ 2.565156] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.565278] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.565481] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.565597] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.569493] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.586222] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.599280] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.612538] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 2.620366] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.628242] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 3.001073] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.129688] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.129917] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.422886] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.423266] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.423487] xen: registering gsi 17 triggering 0 polarity 1 [ 3.423498] Already setup the GSI :17 [ 4.164536] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.294460] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.294620] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.590923] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.593265] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 4.602502] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 5.008509] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.017279] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.566315] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.792437] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.812122] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.890504] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.413489] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.413657] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.413831] device enx0cc47a9f87be entered promiscuous mode [ 14.924671] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 15.033356] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 15.033591] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 15.033716] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 15.034026] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready