[ 0.000000] Linux version 6.1.112+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Tue Oct 1 21:17:29 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000459] tsc: Detected 2199.996 MHz processor [ 0.000895] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000898] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000905] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000907] Disabled [ 0.000908] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000912] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000950] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027845] RAMDISK: [mem 0x04000000-0x05424fff] [ 0.027854] ACPI: Early table checksum verification disabled [ 0.028452] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028464] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028500] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028549] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028566] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028582] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028598] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028615] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028631] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028647] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028664] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028680] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028697] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028713] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028730] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028746] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028763] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028779] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028795] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028816] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028833] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028849] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028860] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028862] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028863] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028864] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028865] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028866] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028867] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028868] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028869] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028870] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028871] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028872] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028873] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028874] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028875] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028876] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028877] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028878] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028879] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028880] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028925] Setting APIC routing to Xen PV. [ 0.032849] Zone ranges: [ 0.032850] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032852] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032854] Normal empty [ 0.032855] Movable zone start for each node [ 0.032856] Early memory node ranges [ 0.032856] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032858] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032859] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032865] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032901] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034447] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034452] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221945] Remapped 102 page(s) [ 0.223315] ACPI: PM-Timer IO Port: 0x408 [ 0.223368] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223371] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223373] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223374] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223376] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223377] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223379] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223380] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223409] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223421] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223425] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223451] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223455] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223524] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223539] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223541] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223542] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223544] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223549] Booting kernel on Xen [ 0.223549] Xen version: 4.20-unstable (preserve-AD) [ 0.223553] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229793] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.230078] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.230084] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.230088] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230166] xen: PV spinlocks enabled [ 0.230170] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230175] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230177] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230213] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230223] random: crng init done [ 0.230272] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230297] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231613] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231616] software IO TLB: area num 8. [ 0.292288] Memory: 389288K/524284K available (14349K kernel code, 2686K rwdata, 4584K rodata, 1580K init, 1288K bss, 134744K reserved, 0K cma-reserved) [ 0.292535] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.296133] Dynamic Preempt: voluntary [ 0.296302] rcu: Preemptible hierarchical RCU implementation. [ 0.296304] rcu: RCU event tracing is enabled. [ 0.296305] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.296309] Trampoline variant of Tasks RCU enabled. [ 0.296310] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.296312] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.308352] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.308494] xen:events: Using FIFO-based ABI [ 0.308518] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.308527] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.308534] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.308541] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.308549] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.308556] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.308563] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.308570] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.308578] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.308585] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.308593] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.308600] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.308608] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.308616] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.308624] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.308635] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.314001] Console: colour VGA+ 80x25 [ 0.328761] printk: console [tty0] enabled [ 0.330022] printk: console [hvc0] enabled [ 0.330143] ACPI: Core revision 20220331 [ 0.344124] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.344286] Xen: using vcpuop timer interface [ 0.344292] installing Xen timer for CPU 0 [ 0.344446] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.344605] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199996) [ 0.344932] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.345050] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.345177] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.345326] Spectre V2 : Mitigation: Retpolines [ 0.345611] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.345757] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.345883] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.346004] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.346151] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.346269] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.346421] MDS: Mitigation: Clear CPU buffers [ 0.346534] TAA: Mitigation: Clear CPU buffers [ 0.346609] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.346775] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.346920] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.347039] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.347162] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.347299] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.364921] Freeing SMP alternatives memory: 40K [ 0.365048] pid_max: default: 32768 minimum: 301 [ 0.365626] LSM: Security Framework initializing [ 0.365748] SELinux: Initializing. [ 0.365886] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.366034] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.366697] cpu 0 spinlock event irq 25 [ 0.366817] VPMU disabled by hypervisor. [ 0.367255] cblist_init_generic: Setting adjustable number of callback queues. [ 0.367402] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.367560] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.367610] signal: max sigframe size: 1776 [ 0.367773] rcu: Hierarchical SRCU implementation. [ 0.367893] rcu: Max phase no-delay instances is 400. [ 0.368383] smp: Bringing up secondary CPUs ... [ 0.368719] installing Xen timer for CPU 1 [ 0.369187] cpu 1 spinlock event irq 35 [ 0.369746] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.369914] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.370103] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.370829] installing Xen timer for CPU 2 [ 0.371296] cpu 2 spinlock event irq 41 [ 0.371697] installing Xen timer for CPU 3 [ 0.372132] cpu 3 spinlock event irq 47 [ 0.372132] installing Xen timer for CPU 4 [ 0.372946] cpu 4 spinlock event irq 53 [ 0.372946] installing Xen timer for CPU 5 [ 0.373783] cpu 5 spinlock event irq 59 [ 0.373813] installing Xen timer for CPU 6 [ 0.374648] cpu 6 spinlock event irq 65 [ 0.374868] installing Xen timer for CPU 7 [ 0.375297] cpu 7 spinlock event irq 71 [ 0.375824] smp: Brought up 1 node, 8 CPUs [ 0.375951] smpboot: Max logical packages: 1 [ 0.376169] devtmpfs: initialized [ 0.376169] x86/mm: Memory block size: 128MB [ 0.376839] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.376877] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.377056] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.377609] PM: RTC time: 22:26:04, date: 2024-10-01 [ 0.377856] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.378002] xen:grant_table: Grant tables using version 1 layout [ 0.378139] Grant table initialized [ 0.378442] audit: initializing netlink subsys (disabled) [ 0.378628] audit: type=2000 audit(1727821565.006:1): state=initialized audit_enabled=0 res=1 [ 0.378678] thermal_sys: Registered thermal governor 'step_wise' [ 0.378678] thermal_sys: Registered thermal governor 'user_space' [ 0.378805] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.379229] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.379612] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.506481] PCI: Using configuration type 1 for base access [ 0.509323] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.509688] ACPI: Added _OSI(Module Device) [ 0.509778] ACPI: Added _OSI(Processor Device) [ 0.509895] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.510014] ACPI: Added _OSI(Processor Aggregator Device) [ 0.540494] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.542471] xen: registering gsi 9 triggering 0 polarity 0 [ 0.545043] ACPI: Dynamic OEM Table Load: [ 0.553480] ACPI: Interpreter enabled [ 0.553616] ACPI: PM: (supports S0 S4 S5) [ 0.553728] ACPI: Using IOAPIC for interrupt routing [ 0.553874] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.554024] PCI: Using E820 reservations for host bridge windows [ 0.554598] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.589163] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.589293] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.589529] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.589754] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.589875] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.590051] PCI host bridge to bus 0000:ff [ 0.590182] pci_bus 0000:ff: root bus resource [bus ff] [ 0.590376] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.590825] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.591250] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.591748] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.592192] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.592614] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.593097] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.593520] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.593950] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.594597] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.595052] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.595691] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.596125] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.596545] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.596925] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.597345] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.597768] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.598194] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.598447] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.598908] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.599577] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.599958] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.600423] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.600889] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.601356] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.601814] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.602436] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.602870] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.603538] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.603956] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.604422] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.604892] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.605316] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.605744] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.606166] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.606603] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.607253] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.607723] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.608191] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.608710] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.609133] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.609555] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.609917] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.610351] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.610790] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.611405] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.611835] pci_bus 0000:ff: on NUMA node 0 [ 0.616370] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.616500] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.616738] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.617080] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.617207] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.617697] PCI host bridge to bus 0000:00 [ 0.617812] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.618134] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.618258] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.618403] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.618555] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.618673] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.619518] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.620009] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.620377] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.620899] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.621287] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.621803] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.622157] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.622676] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.623249] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.623776] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.624141] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.624668] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.625041] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.625617] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.626451] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.627326] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.627544] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.627949] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.628301] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.628519] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.628950] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.629253] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.629474] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.629939] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.630314] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.630513] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.631028] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.631363] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.631910] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.632122] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.632244] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.640793] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.641354] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.641559] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.641617] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.641909] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.642462] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.642657] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.642785] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.643070] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.643624] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.643818] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.643939] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.644277] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.644474] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.645012] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.645340] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.646099] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.646293] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.646461] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.646622] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.646780] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.646944] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.647102] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.647423] pci 0000:00:1f.2: PME# supported from D3hot [ 0.647719] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.647936] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.648182] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.648581] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.648707] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.649426] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.649727] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.650064] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.650276] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.651027] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.651240] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.651943] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.652155] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.652867] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.653080] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.653776] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.653911] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.654249] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.654461] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.654749] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.654933] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.655289] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.655510] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.655608] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.655813] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.655933] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.656505] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.656702] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.656986] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.657170] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.657518] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.657692] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.657813] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.658016] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.658136] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.658689] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.658823] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.658961] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.659256] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.659548] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.659860] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.659980] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.660186] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.660407] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.660572] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.661018] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.661478] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.661603] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.661741] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.662094] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.662213] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.662419] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.662637] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.662802] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.663335] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.663797] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.663923] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.664051] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.664390] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.664803] pci 0000:09:00.0: enabling Extended Tags [ 0.665142] pci 0000:09:00.0: supports D1 D2 [ 0.665255] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.665610] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.665737] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.665871] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.666173] pci_bus 0000:0a: extended config space not accessible [ 0.666343] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.666548] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.666656] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.666823] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.667179] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.667469] pci 0000:0a:00.0: supports D1 D2 [ 0.667582] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.667923] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.668061] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.668191] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.668582] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.668689] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.668898] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.669059] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.669577] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.669724] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.669869] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.670087] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.670231] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.670795] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.671000] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.671209] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.671370] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.671879] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.672108] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.672253] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.672475] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.672608] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.673127] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.673327] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.673536] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.673659] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.674169] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.674397] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.674547] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.674673] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.674817] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.675344] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.675544] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.675698] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.675859] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.676371] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.676600] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.676741] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.676959] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.677103] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.677684] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.677810] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.677939] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.678078] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.678546] pci_bus 0000:00: on NUMA node 0 [ 0.678645] xen: registering gsi 13 triggering 1 polarity 0 [ 0.679617] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.679812] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.680002] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.680190] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.680380] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.680498] ACPI: PCI: Interrupt link LNKE disabled [ 0.680680] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.680798] ACPI: PCI: Interrupt link LNKF disabled [ 0.680981] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.681099] ACPI: PCI: Interrupt link LNKG disabled [ 0.681282] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.681399] ACPI: PCI: Interrupt link LNKH disabled [ 0.681669] xen:balloon: Initialising balloon driver [ 0.681813] iommu: Default domain type: Translated [ 0.688610] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.688795] SCSI subsystem initialized [ 0.689657] libata version 3.00 loaded. [ 0.689657] ACPI: bus type USB registered [ 0.689773] usbcore: registered new interface driver usbfs [ 0.689895] usbcore: registered new interface driver hub [ 0.690016] usbcore: registered new device driver usb [ 0.690143] pps_core: LinuxPPS API ver. 1 registered [ 0.690143] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.690143] PTP clock support registered [ 0.690652] Advanced Linux Sound Architecture Driver Initialized. [ 0.690902] NetLabel: Initializing [ 0.691014] NetLabel: domain hash size = 128 [ 0.691014] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.691014] NetLabel: unlabeled traffic allowed by default [ 0.691644] PCI: Using ACPI for IRQ routing [ 0.726186] PCI: pci_cache_line_size set to 64 bytes [ 0.726967] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.726970] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.727646] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.727767] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.727884] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.728033] vgaarb: loaded [ 0.729607] clocksource: Switched to clocksource tsc-early [ 0.729850] VFS: Disk quotas dquot_6.6.0 [ 0.729974] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.730119] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.730279] pnp: PnP ACPI init [ 0.730759] xen: registering gsi 8 triggering 1 polarity 0 [ 0.730954] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.731080] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.731199] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.731317] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.731435] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.731554] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.731696] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.731820] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.731940] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.732060] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.732180] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.732307] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.732427] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.732860] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.732984] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.733102] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.733221] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.733339] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.733782] xen: registering gsi 4 triggering 1 polarity 0 [ 0.733787] Already setup the GSI :4 [ 0.733900] pnp 00:03: [dma 0 disabled] [ 0.734211] xen: registering gsi 3 triggering 1 polarity 0 [ 0.734223] pnp 00:04: [dma 0 disabled] [ 0.734831] pnp: PnP ACPI: found 5 devices [ 0.765923] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.766080] NET: Registered PF_INET protocol family [ 0.766240] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.766603] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.766785] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.766960] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.767138] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.767310] TCP: Hash tables configured (established 4096 bind 4096) [ 0.767454] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.767576] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.767756] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.768178] RPC: Registered named UNIX socket transport module. [ 0.768312] RPC: Registered udp transport module. [ 0.768425] RPC: Registered tcp transport module. [ 0.768538] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.769108] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.769280] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.769444] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.769620] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.769805] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.769980] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.770153] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.770287] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.770449] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.770572] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.770730] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.770874] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.771019] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.771148] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.771293] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.771436] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.771582] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.771723] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.771871] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.772014] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.772159] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.772281] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.772427] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.772597] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.772764] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.772900] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.773034] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.773205] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.773377] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.773550] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.773695] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.773844] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.774006] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.774125] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.774263] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.774425] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.774545] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.774709] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.774877] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.774997] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.775135] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.775307] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.775464] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.775629] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.775797] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.775952] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.776105] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.776258] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.776410] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.776564] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.776715] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.776856] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.776989] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.777162] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.777312] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.777431] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.777549] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.777692] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.777815] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.777934] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.778060] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.778205] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.778320] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.778439] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.778555] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.778698] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.778816] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.778935] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.779051] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.779174] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.779290] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.779416] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.780001] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.780223] xen: registering gsi 19 triggering 0 polarity 1 [ 0.780250] xen: --> pirq=19 -> irq=19 (gsi=19) [ 2.936528] pci 0000:00:14.0: quirk_usb_early_handoff+0x0/0x720 took 2105842 usecs [ 2.936781] xen: registering gsi 18 triggering 0 polarity 1 [ 2.936801] xen: --> pirq=18 -> irq=18 (gsi=18) [ 2.952958] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 15851 usecs [ 2.953201] xen: registering gsi 18 triggering 0 polarity 1 [ 2.953207] Already setup the GSI :18 [ 2.968899] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 15383 usecs [ 2.969119] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 2.969294] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.969368] Unpacking initramfs... [ 2.969413] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 2.977378] kvm: no hardware support for 'kvm_intel' [ 2.977517] has_svm: not amd or hygon [ 2.977643] kvm: no hardware support for 'kvm_amd' [ 2.977760] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 2.978140] clocksource: Switched to clocksource tsc [ 2.981101] Initialise system trusted keyrings [ 2.981392] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 2.982985] NFS: Registering the id_resolver key type [ 2.983113] Key type id_resolver registered [ 2.983224] Key type id_legacy registered [ 2.983439] 9p: Installing v9fs 9p2000 file system support [ 2.997430] Key type asymmetric registered [ 2.997558] Asymmetric key parser 'x509' registered [ 2.997697] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.997851] io scheduler mq-deadline registered [ 2.997965] io scheduler kyber registered [ 2.998781] xen: registering gsi 16 triggering 0 polarity 1 [ 2.998812] xen: --> pirq=16 -> irq=16 (gsi=16) [ 2.999370] xen: registering gsi 16 triggering 0 polarity 1 [ 2.999376] Already setup the GSI :16 [ 2.999995] xen: registering gsi 16 triggering 0 polarity 1 [ 3.000001] Already setup the GSI :16 [ 3.000324] xen: registering gsi 16 triggering 0 polarity 1 [ 3.000328] Already setup the GSI :16 [ 3.000652] xen: registering gsi 16 triggering 0 polarity 1 [ 3.000655] Already setup the GSI :16 [ 3.001272] xen: registering gsi 16 triggering 0 polarity 1 [ 3.001277] Already setup the GSI :16 [ 3.001870] xen: registering gsi 16 triggering 0 polarity 1 [ 3.001875] Already setup the GSI :16 [ 3.002338] xen: registering gsi 17 triggering 0 polarity 1 [ 3.002355] xen: --> pirq=17 -> irq=17 (gsi=17) [ 3.002687] xen: registering gsi 19 triggering 0 polarity 1 [ 3.002692] Already setup the GSI :19 [ 3.003147] xen: registering gsi 16 triggering 0 polarity 1 [ 3.003151] Already setup the GSI :16 [ 3.003810] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 3.003998] ACPI: button: Power Button [PWRB] [ 3.004142] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 3.004417] ACPI: button: Power Button [PWRF] [ 3.004711] Monitor-Mwait will be used to enter C-1 state [ 3.004744] Monitor-Mwait will be used to enter C-2 state [ 3.004761] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 3.005330] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 3.005703] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 3.006081] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 3.006582] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 3.007091] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 3.007433] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 3.007960] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 3.008771] xen:xen_evtchn: Event-channel device installed [ 3.008963] xen_pciback: backend is vpci [ 3.009801] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.010114] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 3.010861] hpet_acpi_add: no address or irqs in _CRS [ 3.011069] Non-volatile memory driver v1.3 [ 3.011183] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 3.013718] loop: module loaded [ 3.020037] ahci 0000:00:1f.2: version 3.0 [ 3.020138] xen: registering gsi 16 triggering 0 polarity 1 [ 3.020147] Already setup the GSI :16 [ 3.020496] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 3.020646] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 3.036579] scsi host0: ahci [ 3.036927] scsi host1: ahci [ 3.037300] scsi host2: ahci [ 3.037589] scsi host3: ahci [ 3.037974] scsi host4: ahci [ 3.038331] scsi host5: ahci [ 3.038484] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 3.038631] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 3.038776] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 3.038920] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 3.039076] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 3.039220] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 3.039661] tun: Universal TUN/TAP device driver, 1.6 [ 3.039935] e100: Intel(R) PRO/100 Network Driver [ 3.040084] e100: Copyright(c) 1999-2006 Intel Corporation [ 3.040227] sky2: driver version 1.30 [ 3.040416] xen_netfront: Initialising Xen virtual ethernet driver [ 3.040805] xen: registering gsi 18 triggering 0 polarity 1 [ 3.040814] Already setup the GSI :18 [ 3.041038] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 3.041236] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 3.041412] ehci-pci 0000:00:1a.0: debug port 2 [ 3.045563] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 3.052031] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 3.052259] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 3.052409] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.052553] usb usb1: Product: EHCI Host Controller [ 3.052668] usb usb1: Manufacturer: Linux 6.1.112+ ehci_hcd [ 3.052783] usb usb1: SerialNumber: 0000:00:1a.0 [ 3.053085] hub 1-0:1.0: USB hub found [ 3.053210] hub 1-0:1.0: 2 ports detected [ 3.053571] xen: registering gsi 18 triggering 0 polarity 1 [ 3.053581] Already setup the GSI :18 [ 3.053779] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 3.053984] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.054166] ehci-pci 0000:00:1d.0: debug port 2 [ 3.058276] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 3.065044] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 3.065275] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 3.065424] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.065568] usb usb2: Product: EHCI Host Controller [ 3.065683] usb usb2: Manufacturer: Linux 6.1.112+ ehci_hcd [ 3.065799] usb usb2: SerialNumber: 0000:00:1d.0 [ 3.066093] hub 2-0:1.0: USB hub found [ 3.066224] hub 2-0:1.0: 2 ports detected [ 3.066671] xen: registering gsi 19 triggering 0 polarity 1 [ 3.066681] Already setup the GSI :19 [ 3.066888] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.067100] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 3.068318] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 3.068785] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.069005] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 3.069153] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 3.069356] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 3.069504] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.069648] usb usb3: Product: xHCI Host Controller [ 3.069762] usb usb3: Manufacturer: Linux 6.1.112+ xhci-hcd [ 3.069878] usb usb3: SerialNumber: 0000:00:14.0 [ 3.070167] hub 3-0:1.0: USB hub found [ 3.070311] hub 3-0:1.0: 8 ports detected [ 3.071475] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 3.071628] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.071776] usb usb4: Product: xHCI Host Controller [ 3.071890] usb usb4: Manufacturer: Linux 6.1.112+ xhci-hcd [ 3.072019] usb usb4: SerialNumber: 0000:00:14.0 [ 3.072272] hub 4-0:1.0: USB hub found [ 3.072404] hub 4-0:1.0: 6 ports detected [ 3.073623] usbcore: registered new interface driver usblp [ 3.073771] usbcore: registered new interface driver usb-storage [ 3.075162] Freeing initrd memory: 20628K [ 3.075431] i8042: PNP: No PS/2 controller found. [ 3.075757] rtc_cmos 00:00: RTC can wake from S4 [ 3.076445] rtc_cmos 00:00: registered as rtc0 [ 3.076602] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 3.076810] device-mapper: uevent: version 1.0.3 [ 3.076908] xen: registering gsi 18 triggering 0 polarity 1 [ 3.076932] Already setup the GSI :18 [ 3.077054] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 3.077059] intel_pstate: CPU model not supported [ 3.077070] hid: raw HID events driver (C) Jiri Kosina [ 3.077110] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 3.077358] usbcore: registered new interface driver usbhid [ 3.077489] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 3.077581] usbhid: USB HID core driver [ 3.078028] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 3.078493] Initializing XFRM netlink socket [ 3.078752] NET: Registered PF_INET6 protocol family [ 3.079333] Segment Routing with IPv6 [ 3.079455] In-situ OAM (IOAM) with IPv6 [ 3.079598] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.079839] NET: Registered PF_PACKET protocol family [ 3.080013] 9pnet: Installing 9P2000 support [ 3.080146] Key type dns_resolver registered [ 3.080936] IPI shorthand broadcast: enabled [ 3.081090] sched_clock: Marking stable (3045090655, 35965811)->(3927831312, -846774846) [ 3.081693] registered taskstats version 1 [ 3.081809] Loading compiled-in X.509 certificates [ 3.084237] PM: Magic number: 12:807:450 [ 3.084355] machinecheck: hash matches [ 3.084577] printk: console [netcon0] enabled [ 3.084692] netconsole: network logging started [ 3.085043] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.097271] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.097610] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 3.098301] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 3.100069] ALSA device list: [ 3.106179] No soundcards found. [ 3.290073] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 3.306148] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 3.314034] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 3.351120] ata6: SATA link down (SStatus 0 SControl 300) [ 3.351278] ata5: SATA link down (SStatus 0 SControl 300) [ 3.351418] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.351560] ata2: SATA link down (SStatus 0 SControl 300) [ 3.351716] ata1: SATA link down (SStatus 0 SControl 300) [ 3.351864] ata4: SATA link down (SStatus 0 SControl 300) [ 3.352582] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 3.418504] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 3.418657] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.419069] hub 1-1:1.0: USB hub found [ 3.419251] hub 1-1:1.0: 4 ports detected [ 3.434378] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 3.434531] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.434922] hub 2-1:1.0: USB hub found [ 3.435268] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 3.435404] hub 2-1:1.0: 4 ports detected [ 3.435406] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 3.441604] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 3.441759] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.441923] usb 3-3: Product: USB2.0 Hub [ 3.442745] hub 3-3:1.0: USB hub found [ 3.443212] hub 3-3:1.0: 4 ports detected [ 3.463180] ata3.00: configured for UDMA/133 [ 3.463628] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 3.464291] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 3.464336] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 3.464595] sd 2:0:0:0: [sda] Write Protect is off [ 3.464719] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.464781] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.465016] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 3.484364] sda: sda1 sda2 < sda5 > [ 3.484740] sd 2:0:0:0: [sda] Attached SCSI disk [ 3.485999] Freeing unused kernel image (initmem) memory: 1580K [ 3.486128] Write protecting the kernel read-only data: 22528k [ 3.504633] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 3.505965] Freeing unused kernel image (rodata/data gap) memory: 1560K [ 3.981724] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 3.981930] Run /init as init process [ 3.982072] with arguments: [ 3.982074] /init [ 3.982075] placeholder [ 3.982076] with environment: [ 3.982077] HOME=/ [ 3.982078] TERM=linux [ 4.034030] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 4.162379] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 4.162539] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.163368] hub 3-4:1.0: USB hub found [ 4.163587] hub 3-4:1.0: 4 ports detected [ 4.227037] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 4.305433] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 4.305591] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.305736] usb 3-3.2: Product: USB2.0 Hub [ 4.306676] hub 3-3.2:1.0: USB hub found [ 4.307104] hub 3-3.2:1.0: 4 ports detected [ 4.427586] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 4.427758] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 4.428207] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 4.428498] xen: registering gsi 16 triggering 0 polarity 1 [ 4.428510] Already setup the GSI :16 [ 4.430815] igb: Intel(R) Gigabit Ethernet Network Driver [ 4.430940] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.431144] xen: registering gsi 16 triggering 0 polarity 1 [ 4.431150] Already setup the GSI :16 [ 4.457617] pps pps0: new PPS source ptp0 [ 4.457830] igb 0000:07:00.0: added PHC on eth0 [ 4.457964] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 4.458109] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 4.458274] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 4.458397] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 4.458631] xen: registering gsi 17 triggering 0 polarity 1 [ 4.458639] Already setup the GSI :17 [ 4.461033] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 4.488188] pps pps1: new PPS source ptp1 [ 4.488371] igb 0000:08:00.0: added PHC on eth1 [ 4.488505] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 4.488626] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 4.488791] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 4.488913] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 4.489173] xen: registering gsi 16 triggering 0 polarity 1 [ 4.489180] Already setup the GSI :16 [ 4.546872] igb 0000:0b:00.0: added PHC on eth2 [ 4.547024] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 4.547154] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 4.547357] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 4.547472] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 4.547698] xen: registering gsi 17 triggering 0 polarity 1 [ 4.547706] Already setup the GSI :17 [ 4.568390] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 4.568550] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.574411] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 4.606421] igb 0000:0b:00.1: added PHC on eth3 [ 4.606558] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 4.606680] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 4.606915] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 4.607043] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 4.607269] xen: registering gsi 18 triggering 0 polarity 1 [ 4.607276] Already setup the GSI :18 [ 4.664660] igb 0000:0b:00.2: added PHC on eth4 [ 4.664804] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 4.664945] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 4.665185] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 4.665301] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 4.665542] xen: registering gsi 19 triggering 0 polarity 1 [ 4.665551] Already setup the GSI :19 [ 4.675237] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 4.676625] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 4.676932] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 4.723123] igb 0000:0b:00.3: added PHC on eth5 [ 4.723271] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 4.723393] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 4.723596] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 4.723711] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 4.726897] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 4.735512] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 4.748164] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 4.761389] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 4.774398] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 4.782652] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 5.163405] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 5.293426] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 5.293556] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 5.592200] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 5.592667] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 5.592886] xen: registering gsi 17 triggering 0 polarity 1 [ 5.592897] Already setup the GSI :17 [ 6.333607] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 6.463348] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 6.463512] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 6.757898] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 6.760540] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 6.768544] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 7.178214] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 7.185536] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 10.784667] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 11.971387] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 11.996499] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 12.083163] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 13.619448] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 13.619616] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 13.619792] device enx0cc47a9f87be entered promiscuous mode [ 17.186623] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 17.400306] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 17.400601] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 17.400725] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 17.401035] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready