[ 0.000000] Linux version 6.12.0-rc1+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Thu Oct 3 08:45:26 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/pinot1--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000f6000000-0x00000000f6003fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SML/H8SML, BIOS 3.5 11/25/2013 [ 0.000000] DMI: Memory slots populated: 2/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000011] Xen PV: Detected 4 vCPUS [ 0.038872] tsc: Fast TSC calibration using PIT [ 0.038874] tsc: Detected 2800.141 MHz processor [ 0.038875] tsc: Detected 2800.006 MHz TSC [ 0.039098] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.039102] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.039109] last_pfn = 0xdfeb2 max_arch_pfn = 0x400000000 [ 0.039113] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.039115] MTRRs set to read-only [ 0.039117] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.065458] RAMDISK: [mem 0x04000000-0x05473fff] [ 0.065485] ACPI: Early table checksum verification disabled [ 0.066585] ACPI: RSDP 0x00000000000FA1C0 000024 (v02 ACPIAM) [ 0.066596] ACPI: XSDT 0x00000000DFEA0100 00007C (v01 SMCI 20131125 MSFT 00000097) [ 0.066630] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.066677] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20240827/tbfadt-560) [ 0.066688] ACPI: DSDT 0x00000000DFEA0600 00562B (v01 1CF11 1CF11000 00000000 INTL 20051117) [ 0.066698] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.066708] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.066718] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.066728] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.066739] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.066749] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.066759] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.066770] ACPI: SSDT 0x00000000DFEAA6F0 000B9C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.066779] ACPI: EINJ 0x00000000DFEAB290 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.066790] ACPI: BERT 0x00000000DFEAB420 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.066800] ACPI: ERST 0x00000000DFEAB450 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.066809] ACPI: HEST 0x00000000DFEAB660 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.066814] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.066816] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c2a] [ 0.066818] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.066819] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.066820] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.066821] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.066823] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.066824] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.066825] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.066826] ACPI: Reserving SSDT table memory at [mem 0xdfeaa6f0-0xdfeab28b] [ 0.066827] ACPI: Reserving EINJ table memory at [mem 0xdfeab290-0xdfeab3bf] [ 0.066828] ACPI: Reserving BERT table memory at [mem 0xdfeab420-0xdfeab44f] [ 0.066829] ACPI: Reserving ERST table memory at [mem 0xdfeab450-0xdfeab65f] [ 0.066831] ACPI: Reserving HEST table memory at [mem 0xdfeab660-0xdfeab707] [ 0.066949] APIC: Switched APIC routing to: Xen PV [ 0.069223] Zone ranges: [ 0.069225] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.069227] DMA32 [mem 0x0000000001000000-0x00000000dfeb1fff] [ 0.069229] Normal empty [ 0.069230] Movable zone start for each node [ 0.069231] Early memory node ranges [ 0.069232] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.069234] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.069236] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.069247] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.069343] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.073468] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.073478] p2m virtual area at (____ptrval____), size is 40000000 [ 0.337120] Remapped 102 page(s) [ 0.337129] Remapped 0 non-RAM page(s) [ 0.337681] ACPI: PM-Timer IO Port: 0x808 [ 0.337713] CPU topo: CPU limit of 4 reached. Ignoring further CPUs [ 0.337742] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.337747] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.337770] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.337777] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.337788] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.337793] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.337815] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.337819] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.337832] CPU topo: Max. logical packages: 1 [ 0.337833] CPU topo: Max. logical dies: 1 [ 0.337833] CPU topo: Max. dies per package: 1 [ 0.337840] CPU topo: Max. threads per core: 1 [ 0.337841] CPU topo: Num. cores per package: 4 [ 0.337842] CPU topo: Num. threads per package: 4 [ 0.337843] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.337844] CPU topo: Rejected CPUs 4 [ 0.337863] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.337865] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.337867] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.337869] PM: hibernation: Registered nosave memory: [mem 0x20066000-0xdfe9dfff] [ 0.337870] PM: hibernation: Registered nosave memory: [mem 0xdfe9e000-0xdfe9ffff] [ 0.337871] PM: hibernation: Registered nosave memory: [mem 0xdfea0000-0xdfeb1fff] [ 0.337873] [mem 0x20066000-0xdfe9dfff] available for PCI devices [ 0.337878] Booting kernel on Xen [ 0.337879] Xen version: 4.20-unstable (preserve-AD) [ 0.337884] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.344391] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.345305] percpu: Embedded 57 pages/cpu s194520 r8192 d30760 u524288 [ 0.345314] pcpu-alloc: s194520 r8192 d30760 u524288 alloc=1*2097152 [ 0.345319] pcpu-alloc: [0] 0 1 2 3 [ 0.345404] xen: PV spinlocks enabled [ 0.345409] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.345412] Kernel command line: placeholder root=/dev/mapper/pinot1--vg-root ro console=hvc0 [ 0.345506] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.345711] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.345807] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.346014] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.346017] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.346020] software IO TLB: area num 4. [ 0.452772] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.455631] Dynamic Preempt: voluntary [ 0.455745] rcu: Preemptible hierarchical RCU implementation. [ 0.455746] rcu: RCU event tracing is enabled. [ 0.455747] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.455749] Trampoline variant of Tasks RCU enabled. [ 0.455751] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.455752] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.455773] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.462800] NR_IRQS: 4352, nr_irqs: 1000, preallocated irqs: 16 [ 0.462958] xen:events: Using FIFO-based ABI [ 0.462988] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.462999] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.463005] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.463010] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.463015] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.463020] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.463025] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.463030] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.463035] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.463040] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.463046] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.463051] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.463056] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.463061] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.463066] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.463078] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.469202] Console: colour VGA+ 80x25 [ 0.469208] printk: legacy console [tty0] enabled [ 0.483359] printk: legacy console [hvc0] enabled [ 0.484031] ACPI: Core revision 20240827 [ 0.488038] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.488194] Xen: using vcpuop timer interface [ 0.488200] installing Xen timer for CPU 0 [ 0.488444] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c46737c2, max_idle_ns: 440795276593 ns [ 0.488603] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.01 BogoMIPS (lpj=2800006) [ 0.488796] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.489040] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.489161] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.489275] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.489612] Spectre V2 : Mitigation: Retpolines [ 0.489715] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.489858] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.489968] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.490078] RETBleed: Mitigation: untrained return thunk [ 0.490184] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.490328] Speculative Store Bypass: Vulnerable [ 0.490481] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.490606] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.490715] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.490824] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.490933] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.517009] Freeing SMP alternatives memory: 40K [ 0.517170] pid_max: default: 32768 minimum: 301 [ 0.517312] LSM: initializing lsm=capability,selinux [ 0.517450] SELinux: Initializing. [ 0.517777] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.517924] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.519734] cpu 0 spinlock event irq 57 [ 0.519873] VPMU disabled by hypervisor. [ 0.520439] Performance Events: PMU not available due to virtualization, using software events only. [ 0.520600] signal: max sigframe size: 1776 [ 0.520763] rcu: Hierarchical SRCU implementation. [ 0.520867] rcu: Max phase no-delay instances is 400. [ 0.521077] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.530798] smp: Bringing up secondary CPUs ... [ 0.532668] installing Xen timer for CPU 1 [ 0.533107] installing Xen timer for CPU 2 [ 0.533478] installing Xen timer for CPU 3 [ 0.026517] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0011 [ 0.533716] cpu 1 spinlock event irq 77 [ 0.026517] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0012 [ 0.534858] cpu 2 spinlock event irq 78 [ 0.026517] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0013 [ 0.535836] cpu 3 spinlock event irq 79 [ 0.536825] smp: Brought up 1 node, 4 CPUs [ 0.536999] Memory: 381932K/524284K available (16384K kernel code, 2785K rwdata, 6296K rodata, 2732K init, 1708K bss, 138300K reserved, 0K cma-reserved) [ 0.537839] devtmpfs: initialized [ 0.537839] x86/mm: Memory block size: 128MB [ 0.538909] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.538909] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.539029] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.539604] PM: RTC time: 10:00:32, date: 2024-10-03 [ 0.539992] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.540133] xen:grant_table: Grant tables using version 1 layout [ 0.540261] Grant table initialized [ 0.540613] audit: initializing netlink subsys (disabled) [ 0.540768] audit: type=2000 audit(1727949633.130:1): state=initialized audit_enabled=0 res=1 [ 0.540768] thermal_sys: Registered thermal governor 'step_wise' [ 0.540768] thermal_sys: Registered thermal governor 'user_space' [ 0.541918] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.542183] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.796783] PCI: Using configuration type 1 for base access [ 0.797078] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.797732] ACPI: Added _OSI(Module Device) [ 0.797800] ACPI: Added _OSI(Processor Device) [ 0.797910] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.798708] ACPI: Added _OSI(Processor Aggregator Device) [ 0.805111] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.805740] xen: registering gsi 9 triggering 0 polarity 1 [ 0.806952] ACPI: Interpreter enabled [ 0.807089] ACPI: PM: (supports S0 S1 S4 S5) [ 0.807199] ACPI: Using IOAPIC for interrupt routing [ 0.807356] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.807512] PCI: Using E820 reservations for host bridge windows [ 0.807795] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.820038] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.820165] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.820328] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.820448] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.820599] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.821071] PCI host bridge to bus 0000:00 [ 0.821182] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.821341] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.821461] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.821604] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.821753] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.821902] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.822090] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.822750] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.823354] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.823590] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.823621] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.823745] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.823964] pci 0000:00:09.0: enabling Extended Tags [ 0.824214] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.824556] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.824688] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.824815] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.824936] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.825114] pci 0000:00:0a.0: enabling Extended Tags [ 0.825406] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.825776] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f conventional PCI endpoint [ 0.825979] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.826117] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.826256] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.826394] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.826533] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.826631] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.826837] pci 0000:00:11.0: set SATA to AHCI mode [ 0.827191] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.827394] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.827821] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.828048] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.828498] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.828654] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.829025] pci 0000:00:12.2: supports D1 D2 [ 0.829159] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.829490] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.829653] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.830076] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.830303] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.830787] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.830988] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.831360] pci 0000:00:13.2: supports D1 D2 [ 0.831492] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.831802] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.832409] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.832612] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.832778] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.832915] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.833051] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.833189] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.833403] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.833521] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.833604] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.833722] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.834076] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.834620] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.834912] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.835073] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.835203] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.835505] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.835654] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.836136] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.836545] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.836803] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.837162] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.837598] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.837947] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.838476] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.838668] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.838846] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.838989] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.839391] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.839853] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.840210] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.840417] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.840593] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.840636] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.841066] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.842674] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.842857] pci_bus 0000:03: extended config space not accessible [ 0.843043] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.843841] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.844250] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.844690] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.845131] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.845600] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.845733] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.845881] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.846032] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.846182] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.846330] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.846551] pci_bus 0000:00: on NUMA node 0 [ 0.847215] xen: registering gsi 13 triggering 1 polarity 0 [ 0.847726] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.847915] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.848168] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.848354] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.848537] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.848680] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.848865] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.849053] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.849326] xen:balloon: Initialising balloon driver [ 0.850018] iommu: Default domain type: Translated [ 0.850341] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.850949] SCSI subsystem initialized [ 0.851237] libata version 3.00 loaded. [ 0.851711] ACPI: bus type USB registered [ 0.851989] usbcore: registered new interface driver usbfs [ 0.852320] usbcore: registered new interface driver hub [ 0.852669] usbcore: registered new device driver usb [ 0.852961] pps_core: LinuxPPS API ver. 1 registered [ 0.853240] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.853600] PTP clock support registered [ 0.854659] Advanced Linux Sound Architecture Driver Initialized. [ 0.856520] NetLabel: Initializing [ 0.856616] NetLabel: domain hash size = 128 [ 0.856819] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.857222] NetLabel: unlabeled traffic allowed by default [ 0.857701] PCI: Using ACPI for IRQ routing [ 0.933551] PCI: pci_cache_line_size set to 64 bytes [ 0.933758] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.933763] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.933833] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.933833] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.933881] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.934027] vgaarb: loaded [ 0.935267] clocksource: Switched to clocksource tsc-early [ 0.935492] VFS: Disk quotas dquot_6.6.0 [ 0.935492] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.935492] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.935512] pnp: PnP ACPI init [ 0.935952] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.935952] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.936741] xen: registering gsi 8 triggering 1 polarity 0 [ 0.937001] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.937326] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.937448] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.937960] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.938089] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.938206] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.938322] system 00:05: [io 0x040b] has been reserved [ 0.938435] system 00:05: [io 0x04d6] has been reserved [ 0.938548] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.938671] system 00:05: [io 0x0c14] has been reserved [ 0.938785] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.938900] system 00:05: [io 0x0c52] has been reserved [ 0.939039] system 00:05: [io 0x0c6c] has been reserved [ 0.939152] system 00:05: [io 0x0c6f] has been reserved [ 0.939265] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.939381] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.939511] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.939636] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.939752] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.939868] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.939983] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.940099] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.940214] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.940349] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.940465] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.940581] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.940708] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.940828] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.941250] xen: registering gsi 4 triggering 1 polarity 0 [ 0.941254] Already setup the GSI :4 [ 0.941361] pnp 00:06: [dma 0 disabled] [ 0.941708] xen: registering gsi 3 triggering 1 polarity 0 [ 0.941720] pnp 00:07: [dma 0 disabled] [ 0.941899] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.942298] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.942496] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.942627] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.942772] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.942892] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.943193] pnp: PnP ACPI: found 10 devices [ 0.966440] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.966630] NET: Registered PF_INET protocol family [ 0.966835] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.967313] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.967471] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.967653] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.967821] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.968017] TCP: Hash tables configured (established 4096 bind 4096) [ 0.968179] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.968301] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.968491] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.969129] RPC: Registered named UNIX socket transport module. [ 0.969268] RPC: Registered udp transport module. [ 0.969371] RPC: Registered tcp transport module. [ 0.969474] RPC: Registered tcp-with-tls transport module. [ 0.969618] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.971114] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.971423] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.971667] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.971797] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.971905] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.972048] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.972178] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.972292] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.972410] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.972568] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.972693] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.972807] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.972919] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.973032] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.973143] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.973275] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.973386] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.973493] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.973613] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.973857] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.974148] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.974434] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.974656] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.974770] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.974882] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.975188] xen: registering gsi 16 triggering 0 polarity 1 [ 0.975238] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.637893] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 647269 usecs [ 1.638143] xen: registering gsi 16 triggering 0 polarity 1 [ 1.638154] Already setup the GSI :16 [ 1.662133] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 23480 usecs [ 1.662686] xen: registering gsi 17 triggering 0 polarity 1 [ 1.662763] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.662958] xen: registering gsi 18 triggering 0 polarity 1 [ 1.662977] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.685877] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 22432 usecs [ 1.686136] xen: registering gsi 18 triggering 0 polarity 1 [ 1.686148] Already setup the GSI :18 [ 1.709868] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 23237 usecs [ 1.710134] xen: registering gsi 19 triggering 0 polarity 1 [ 1.710199] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.710424] xen: registering gsi 18 triggering 0 polarity 1 [ 1.710429] Already setup the GSI :18 [ 1.734109] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 23182 usecs [ 1.734662] PCI: CLS 64 bytes, default 64 [ 1.734816] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.734934] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 1.735163] kvm_intel: VMX not supported by CPU 0 [ 1.735282] kvm_amd: SVM not supported by CPU 0 [ 1.735293] Unpacking initramfs... [ 1.735395] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c46737c2, max_idle_ns: 440795276593 ns [ 1.736218] clocksource: Switched to clocksource tsc [ 1.750588] Initialise system trusted keyrings [ 1.751210] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.752619] NFS: Registering the id_resolver key type [ 1.752982] Key type id_resolver registered [ 1.753292] Key type id_legacy registered [ 1.754017] 9p: Installing v9fs 9p2000 file system support [ 1.791624] Key type asymmetric registered [ 1.791968] Asymmetric key parser 'x509' registered [ 1.792435] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.792960] io scheduler mq-deadline registered [ 1.793271] io scheduler kyber registered [ 1.794974] xen: registering gsi 53 triggering 0 polarity 1 [ 1.795177] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.797126] xen: registering gsi 54 triggering 0 polarity 1 [ 1.797256] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.799649] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.800273] ACPI: button: Power Button [PWRB] [ 1.800927] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.801881] ACPI: button: Power Button [PWRF] [ 1.808757] xen:xen_evtchn: Event-channel device installed [ 1.809009] xen_pciback: backend is vpci [ 1.811274] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.811965] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.812944] hpet_acpi_add: no address or irqs in _CRS [ 1.813145] Non-volatile memory driver v1.3 [ 1.816875] loop: module loaded [ 1.838914] ahci 0000:00:11.0: version 3.0 [ 1.839055] xen: registering gsi 22 triggering 0 polarity 1 [ 1.839096] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.839268] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.839449] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.839575] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.841225] scsi host0: ahci [ 1.842513] scsi host1: ahci [ 1.843574] scsi host2: ahci [ 1.844584] scsi host3: ahci [ 1.845216] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 4 [ 1.845664] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 4 [ 1.846034] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 4 [ 1.846388] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 4 [ 1.847306] tun: Universal TUN/TAP device driver, 1.6 [ 1.847614] e100: Intel(R) PRO/100 Network Driver [ 1.847720] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.847840] sky2: driver version 1.30 [ 1.848035] xen_netfront: Initialising Xen virtual ethernet driver [ 1.848488] xen: registering gsi 16 triggering 0 polarity 1 [ 1.848499] Already setup the GSI :16 [ 1.848633] xen: registering gsi 17 triggering 0 polarity 1 [ 1.848639] Already setup the GSI :17 [ 1.848725] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.849020] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.849271] xen: registering gsi 19 triggering 0 polarity 1 [ 1.849295] Already setup the GSI :19 [ 1.849348] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.904859] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 1.905038] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.905183] usb usb1: Product: OHCI PCI host controller [ 1.905326] usb usb1: Manufacturer: Linux 6.12.0-rc1+ ohci_hcd [ 1.905435] usb usb1: SerialNumber: 0000:00:12.0 [ 1.905817] hub 1-0:1.0: USB hub found [ 1.905933] hub 1-0:1.0: 3 ports detected [ 1.906471] xen: registering gsi 16 triggering 0 polarity 1 [ 1.906477] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.906481] Already setup the GSI :16 [ 1.906774] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2 [ 1.906937] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.907106] ehci-pci 0000:00:12.2: debug port 1 [ 1.907328] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.913581] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.914210] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 1.914558] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.914815] usb usb2: Product: EHCI Host Controller [ 1.915177] usb usb2: Manufacturer: Linux 6.12.0-rc1+ ehci_hcd [ 1.915517] usb usb2: SerialNumber: 0000:00:12.2 [ 1.916744] hub 2-0:1.0: USB hub found [ 1.917127] hub 2-0:1.0: 6 ports detected [ 1.966786] hub 1-0:1.0: USB hub found [ 1.966925] hub 1-0:1.0: 3 ports detected [ 1.967228] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.967520] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 1.967770] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.967946] ehci-pci 0000:00:13.2: debug port 1 [ 1.968172] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 1.973661] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.973927] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 1.974077] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.974219] usb usb3: Product: EHCI Host Controller [ 1.974344] usb usb3: Manufacturer: Linux 6.12.0-rc1+ ehci_hcd [ 1.974674] usb usb3: SerialNumber: 0000:00:13.2 [ 1.975647] hub 3-0:1.0: USB hub found [ 1.976007] hub 3-0:1.0: 6 ports detected [ 1.978290] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.979099] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.979765] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 1.985572] Freeing initrd memory: 20944K [ 2.034724] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 2.034912] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.035052] usb usb4: Product: OHCI PCI host controller [ 2.035157] usb usb4: Manufacturer: Linux 6.12.0-rc1+ ohci_hcd [ 2.035263] usb usb4: SerialNumber: 0000:00:12.1 [ 2.035599] hub 4-0:1.0: USB hub found [ 2.035713] hub 4-0:1.0: 3 ports detected [ 2.036153] xen: registering gsi 18 triggering 0 polarity 1 [ 2.036160] Already setup the GSI :18 [ 2.036307] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.036574] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 2.036784] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 2.091704] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 2.091857] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.091997] usb usb5: Product: OHCI PCI host controller [ 2.092101] usb usb5: Manufacturer: Linux 6.12.0-rc1+ ohci_hcd [ 2.092231] usb usb5: SerialNumber: 0000:00:13.0 [ 2.092503] hub 5-0:1.0: USB hub found [ 2.092629] hub 5-0:1.0: 3 ports detected [ 2.093006] xen: registering gsi 18 triggering 0 polarity 1 [ 2.093011] Already setup the GSI :18 [ 2.093147] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 2.093340] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 2.093537] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 2.148681] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 2.148834] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.148973] usb usb6: Product: OHCI PCI host controller [ 2.149078] usb usb6: Manufacturer: Linux 6.12.0-rc1+ ohci_hcd [ 2.149191] usb usb6: SerialNumber: 0000:00:13.1 [ 2.149532] hub 6-0:1.0: USB hub found [ 2.149669] hub 6-0:1.0: 3 ports detected [ 2.150006] xen: registering gsi 18 triggering 0 polarity 1 [ 2.150011] Already setup the GSI :18 [ 2.150147] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.150327] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.150505] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 2.150520] ata4: SATA link down (SStatus 0 SControl 300) [ 2.150863] ata3: SATA link down (SStatus 0 SControl 300) [ 2.205722] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 2.205888] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.206067] usb usb7: Product: OHCI PCI host controller [ 2.206172] usb usb7: Manufacturer: Linux 6.12.0-rc1+ ohci_hcd [ 2.206278] usb usb7: SerialNumber: 0000:00:14.5 [ 2.206590] hub 7-0:1.0: USB hub found [ 2.206702] hub 7-0:1.0: 2 ports detected [ 2.206998] usbcore: registered new interface driver usblp [ 2.207152] usbcore: registered new interface driver usb-storage [ 2.207368] i8042: PNP: No PS/2 controller found. [ 2.207510] i8042: Probing ports directly. [ 2.210572] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.210681] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.211021] rtc_cmos 00:02: RTC can wake from S4 [ 2.211691] rtc_cmos 00:02: registered as rtc0 [ 2.211838] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 2.212018] device-mapper: uevent: version 1.0.3 [ 2.212230] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 2.212381] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 2.212547] hid: raw HID events driver (C) Jiri Kosina [ 2.212852] usbcore: registered new interface driver usbhid [ 2.212999] usbhid: USB HID core driver [ 2.213602] Initializing XFRM netlink socket [ 2.213720] NET: Registered PF_INET6 protocol family [ 2.214444] Segment Routing with IPv6 [ 2.214572] In-situ OAM (IOAM) with IPv6 [ 2.214711] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.214972] NET: Registered PF_PACKET protocol family [ 2.215104] 9pnet: Installing 9P2000 support [ 2.215227] Key type dns_resolver registered [ 2.215341] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 2.215912] IPI shorthand broadcast: enabled [ 2.220361] sched_clock: Marking stable (2194003752, 25517617)->(2238696271, -19174902) [ 2.220892] registered taskstats version 1 [ 2.220996] Loading compiled-in X.509 certificates [ 2.223154] PM: Magic number: 12:270:21 [ 2.223296] pcieport 0000:00:09.0: hash matches [ 2.223418] printk: legacy console [netcon0] enabled [ 2.223532] netconsole: network logging started [ 2.223775] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.234115] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.236088] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 2.236959] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 2.237138] ALSA device list: [ 2.237243] No soundcards found. [ 2.304562] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.304702] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.305186] ata2.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133 [ 2.305720] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.306198] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 2.306552] ata2.00: configured for UDMA/133 [ 2.306771] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.308365] ata1.00: configured for UDMA/133 [ 2.318757] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.319300] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.319330] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.319635] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5 [ 2.319650] sd 0:0:0:0: [sda] Write Protect is off [ 2.319932] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.319963] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.320155] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.320188] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.320206] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.320546] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 2.320667] sd 1:0:0:0: [sdb] Write Protect is off [ 2.320779] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.320801] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.320988] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 2.355073] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.355343] sdb: sdb1 sdb2 < sdb5 > [ 2.355700] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.357375] Freeing unused kernel image (initmem) memory: 2732K [ 2.357511] Write protecting the kernel read-only data: 24576k [ 2.369304] Freeing unused kernel image (rodata/data gap) memory: 1896K [ 2.462554] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.485647] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.485766] Run /init as init process [ 2.485863] with arguments: [ 2.485865] /init [ 2.485866] placeholder [ 2.485868] with environment: [ 2.485869] HOME=/ [ 2.485870] TERM=linux [ 2.622725] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.622897] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.623021] usb 6-2: Product: Hermon USB hidmouse Device [ 2.623135] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.629468] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.629839] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.633239] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.748817] e1000e: Intel(R) PRO/1000 Network Driver [ 2.748955] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.749196] xen: registering gsi 48 triggering 0 polarity 1 [ 2.749235] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.749481] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.788787] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.791480] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.834423] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e9:2a [ 2.834593] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.834789] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.835025] xen: registering gsi 47 triggering 0 polarity 1 [ 2.835053] xen: --> pirq=47 -> irq=47 (gsi=47) [ 2.835247] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.877548] random: crng init done [ 2.880583] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.924563] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e9:2b [ 2.924719] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.924909] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.926706] e1000e 0000:01:00.0 enx002590aee92a: renamed from eth0 [ 2.928200] e1000e 0000:02:00.0 enx002590aee92b: renamed from eth1 [ 3.559055] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.574058] EXT4-fs (dm-0): mounted filesystem cad91e7d-cad5-4005-80c3-1a1fed9eee7a ro with ordered data mode. Quota mode: none. [ 7.797107] EXT4-fs (dm-0): re-mounted cad91e7d-cad5-4005-80c3-1a1fed9eee7a r/w. Quota mode: none. [ 9.057271] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem [ 9.069592] EXT4-fs (sdb1): mounted filesystem c6f422bd-a3a6-4849-b275-91a953cac824 r/w with ordered data mode. Quota mode: none. [ 9.145876] Adding 1949692k swap on /dev/mapper/pinot1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 10.736696] xenbr0: port 1(enx002590aee92a) entered blocking state [ 10.736874] xenbr0: port 1(enx002590aee92a) entered disabled state [ 10.736991] e1000e 0000:01:00.0 enx002590aee92a: entered allmulticast mode [ 10.737147] e1000e 0000:01:00.0 enx002590aee92a: entered promiscuous mode [ 13.821552] e1000e 0000:01:00.0 enx002590aee92a: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 13.821955] xenbr0: port 1(enx002590aee92a) entered blocking state [ 13.822083] xenbr0: port 1(enx002590aee92a) entered forwarding state