[ 0.000000] microcode: microcode updated early to revision 0x42e, date = 2019-03-14 [ 0.000000] Linux version 6.1.0-25-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.106-3 (2024-08-26) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 root=/dev/mapper/fiano0--vg-root ro console=ttyS0,115200n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007de2bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1799.855 MHz processor [ 0.000921] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000926] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000937] last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.001078] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001726] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved [ 0.001735] last_pfn = 0x7de2c max_arch_pfn = 0x400000000 [ 0.018544] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] [ 0.018570] Using GB pages for direct mapping [ 0.019080] RAMDISK: [mem 0x3310b000-0x3587cfff] [ 0.019088] ACPI: Early table checksum verification disabled [ 0.019092] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.019099] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019108] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019116] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.019122] ACPI: FACS 0x000000007E1D8080 000040 [ 0.019126] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.019131] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.019136] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.019141] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.019147] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.019152] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.019157] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.019163] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.019168] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.019173] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.019178] ACPI: DMAR 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.019183] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.019187] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.019190] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.019191] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.019193] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.019194] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.019195] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.019197] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.019198] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.019200] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.019201] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.019202] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.019204] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.019205] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.019206] ACPI: Reserving DMAR table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.019208] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.019277] No NUMA configuration found [ 0.019279] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] [ 0.019295] NODE_DATA(0) allocated [mem 0x27ffd5000-0x27fffffff] [ 0.019756] Zone ranges: [ 0.019757] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.019760] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.019763] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.019765] Device empty [ 0.019766] Movable zone start for each node [ 0.019771] Early memory node ranges [ 0.019771] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.019774] node 0: [mem 0x0000000000100000-0x000000007de2bfff] [ 0.019775] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.019779] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.019787] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.019845] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.028072] On node 0, zone Normal: 8660 pages in unavailable ranges [ 0.028367] ACPI: PM-Timer IO Port: 0x408 [ 0.028379] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.028381] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.028383] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.028384] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.028396] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.028403] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.028406] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028409] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.028416] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028418] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.028425] TSC deadline timer available [ 0.028426] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.028447] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028450] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.028452] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.028453] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.028454] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.028456] PM: hibernation: Registered nosave memory: [mem 0x7de2c000-0x7debafff] [ 0.028458] PM: hibernation: Registered nosave memory: [mem 0x7debb000-0x7dfc3fff] [ 0.028459] PM: hibernation: Registered nosave memory: [mem 0x7dfc4000-0x7e1e0fff] [ 0.028460] PM: hibernation: Registered nosave memory: [mem 0x7e1e1000-0x7f36afff] [ 0.028462] PM: hibernation: Registered nosave memory: [mem 0x7f36b000-0x7f7fffff] [ 0.028463] PM: hibernation: Registered nosave memory: [mem 0x7f800000-0x7fffffff] [ 0.028464] PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff] [ 0.028465] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.028466] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff] [ 0.028468] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff] [ 0.028469] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.028471] [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.028473] Booting paravirtualized kernel on bare hardware [ 0.028476] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.035762] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.036155] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.036164] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.036168] pcpu-alloc: [0] 0 1 2 3 [ 0.036208] Fallback order for Node 0: 0 [ 0.036213] Built 1 zonelists, mobility grouping on. Total pages: 2055603 [ 0.036215] Policy zone: Normal [ 0.036217] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 root=/dev/mapper/fiano0--vg-root ro console=ttyS0,115200n8 [ 0.036287] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64", will be passed to user space. [ 0.036301] random: crng init done [ 0.037347] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.037917] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.038005] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.038017] software IO TLB: area num 4. [ 0.079688] Memory: 2086372K/8353556K available (14342K kernel code, 2335K rwdata, 9072K rodata, 2796K init, 17396K bss, 305204K reserved, 0K cma-reserved) [ 0.079900] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.079922] Kernel/User page tables isolation: enabled [ 0.079976] ftrace: allocating 40246 entries in 158 pages [ 0.090332] ftrace: allocated 158 pages with 5 groups [ 0.091279] Dynamic Preempt: voluntary [ 0.091324] rcu: Preemptible hierarchical RCU implementation. [ 0.091325] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.091327] Trampoline variant of Tasks RCU enabled. [ 0.091328] Rude variant of Tasks RCU enabled. [ 0.091329] Tracing variant of Tasks RCU enabled. [ 0.091330] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.091331] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.098753] NR_IRQS: 524544, nr_irqs: 864, preallocated irqs: 16 [ 0.098959] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.103447] Console: colour VGA+ 80x25 [ 1.028013] printk: console [ttyS0] enabled [ 1.032218] ACPI: Core revision 20220331 [ 1.036870] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 1.046011] APIC: Switch to symmetric I/O mode setup [ 1.050993] DMAR: Host address width 46 [ 1.054839] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 1.060167] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de [ 1.068090] DMAR: RMRR base: 0x0000007de91000 end: 0x0000007de9dfff [ 1.074365] DMAR: ATSR flags: 0x0 [ 1.077676] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 1.083944] DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0 [ 1.090305] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0 [ 1.096657] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 1.102057] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 1.111197] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 1.116595] x2apic enabled [ 1.119323] Switched APIC routing to cluster x2apic. [ 1.124830] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.150019] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f1a0c2acf, max_idle_ns: 440795284458 ns [ 1.160535] Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.71 BogoMIPS (lpj=7199420) [ 1.164566] CPU0: Thermal monitoring enabled (TM1) [ 1.168618] process: using mwait in idle threads [ 1.172535] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 1.176533] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 1.180536] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.184534] Spectre V2 : Mitigation: Retpolines [ 1.188533] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.192533] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.196533] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 1.200535] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.204534] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 1.208534] MDS: Mitigation: Clear CPU buffers [ 1.212533] MMIO Stale Data: Unknown: No mitigations [ 1.216538] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.220533] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.224533] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.228533] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.232533] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.261083] Freeing SMP alternatives memory: 36K [ 1.264534] pid_max: default: 32768 minimum: 301 [ 1.268567] LSM: Security Framework initializing [ 1.272551] landlock: Up and running. [ 1.276533] Yama: disabled by default; enable with sysctl kernel.yama.* [ 1.280565] AppArmor: AppArmor initialized [ 1.284535] TOMOYO Linux initialized [ 1.288540] LSM support for eBPF active [ 1.292580] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.296549] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.305075] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2403 v2 @ 1.80GHz (family: 0x6, model: 0x3e, stepping: 0x4) [ 1.308723] cblist_init_generic: Setting adjustable number of callback queues. [ 1.312534] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.316564] cblist_init_generic: Setting adjustable number of callback queues. [ 1.320534] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.324556] cblist_init_generic: Setting adjustable number of callback queues. [ 1.328534] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.332554] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 1.336535] ... version: 3 [ 1.340533] ... bit width: 48 [ 1.344533] ... generic registers: 8 [ 1.348533] ... value mask: 0000ffffffffffff [ 1.352533] ... max period: 00007fffffffffff [ 1.356533] ... fixed-purpose events: 3 [ 1.360533] ... event mask: 00000007000000ff [ 1.364767] signal: max sigframe size: 1776 [ 1.368558] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 1.372566] rcu: Hierarchical SRCU implementation. [ 1.376534] rcu: Max phase no-delay instances is 1000. [ 1.381207] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.384628] smp: Bringing up secondary CPUs ... [ 1.388681] x86: Booting SMP configuration: [ 1.392539] .... node #0, CPUs: #1 #2 #3 [ 1.407879] smp: Brought up 1 node, 4 CPUs [ 1.412534] smpboot: Max logical packages: 1 [ 1.416534] smpboot: Total of 4 processors activated (14398.84 BogoMIPS) [ 1.437948] node 0 deferred pages initialised in 20ms [ 1.444999] devtmpfs: initialized [ 1.448613] x86/mm: Memory block size: 128MB [ 1.453570] ACPI: PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 1.456586] ACPI: PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 1.460688] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.464546] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.468594] pinctrl core: initialized pinctrl subsystem [ 1.473435] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.476811] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 1.480686] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.484684] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.488543] audit: initializing netlink subsys (disabled) [ 1.492548] audit: type=2000 audit(1727966899.404:1): state=initialized audit_enabled=0 res=1 [ 1.492683] thermal_sys: Registered thermal governor 'fair_share' [ 1.496538] thermal_sys: Registered thermal governor 'bang_bang' [ 1.500534] thermal_sys: Registered thermal governor 'step_wise' [ 1.504534] thermal_sys: Registered thermal governor 'user_space' [ 1.508534] thermal_sys: Registered thermal governor 'power_allocator' [ 1.512551] cpuidle: using governor ladder [ 1.520539] cpuidle: using governor menu [ 1.524506] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 1.524535] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.528637] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 1.532536] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 1.536543] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 1.540955] PCI: Using configuration type 1 for base access [ 1.544631] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 1.549849] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.552593] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 1.556536] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 1.564534] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 1.572533] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 1.579178] ACPI: Added _OSI(Module Device) [ 1.580546] ACPI: Added _OSI(Processor Device) [ 1.584534] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.588534] ACPI: Added _OSI(Processor Aggregator Device) [ 1.708729] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.735728] ACPI: Interpreter enabled [ 1.736554] ACPI: PM: (supports S0 S1 S4 S5) [ 1.740534] ACPI: Using IOAPIC for interrupt routing [ 1.744642] HEST: Table parsing has been initialized. [ 1.748655] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 1.752537] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.756533] PCI: Using E820 reservations for host bridge windows [ 1.761091] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.764695] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PRAD], AE_NOT_FOUND (20220331/psargs-330) [ 1.768537] ACPI Error: Aborting method \_GPE._L24 due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 1.772543] ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_L24] (20220331/evgpe-511) [ 1.774679] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.776532] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.792627] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR] [ 1.800685] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability] [ 1.808534] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.816893] PCI host bridge to bus 0000:00 [ 1.820536] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.824534] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.832537] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.840534] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.848534] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 1.852534] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.860534] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.868534] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.876534] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.880565] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.888617] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.892657] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.900633] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.908702] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.912632] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.920697] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.924572] pci 0000:00:03.0: enabling Extended Tags [ 1.928598] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.936682] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.940551] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.948674] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.956553] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.960670] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 1.968550] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 1.976669] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 1.980550] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 1.988676] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 1.992550] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 2.000668] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 2.008550] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 2.012667] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 2.020550] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 2.028669] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 2.032550] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 2.040672] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 2.044657] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 2.052660] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 2.056545] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 2.064684] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 2.072654] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 2.076684] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 2.084554] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 2.088602] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 2.096625] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 2.100552] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 2.108601] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 2.116635] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 2.120550] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 2.128625] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.132638] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 2.140633] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.144562] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 2.152535] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 2.156640] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 2.164633] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.168558] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 2.172535] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 2.180647] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 2.188550] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 2.192625] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.200636] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.204679] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 2.212770] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 2.216547] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 2.224540] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 2.228540] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 2.236540] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 2.240540] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 2.244540] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 2.252578] pci 0000:00:1f.2: PME# supported from D3hot [ 2.256628] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 2.264552] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 2.268554] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 2.276609] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 2.280554] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 2.288697] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.292585] pci 0000:00:01.1: PCI bridge to [bus 02] [ 2.300581] pci 0000:00:03.0: PCI bridge to [bus 03] [ 2.304611] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 2.308556] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 2.316548] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 2.324543] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 2.328560] pci 0000:04:00.0: enabling Extended Tags [ 2.336643] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 2.344534] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 2.352788] pci 0000:00:11.0: PCI bridge to [bus 04] [ 2.356537] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 2.364542] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 2.372632] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 2.376569] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 2.384571] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 2.388552] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 2.396720] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 2.400749] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 2.408537] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 2.412536] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 2.420640] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 2.428569] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 2.432571] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 2.436552] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 2.444720] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 2.452745] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 2.456537] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 2.460539] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 2.468556] pci_bus 0000:07: extended config space not accessible [ 2.476560] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 2.480550] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 2.488542] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 2.492542] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 2.500580] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.508641] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 2.516538] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 2.520538] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 2.528534] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 2.540534] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 2.548534] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 2.556534] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 2.564534] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 2.572534] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 2.584536] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 2.592534] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 2.601310] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 2.608538] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.616552] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 2.624534] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 2.632601] PCI host bridge to bus 0000:ff [ 2.640535] pci_bus 0000:ff: root bus resource [bus ff] [ 2.644547] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 2.648615] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 2.656603] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 2.660594] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 2.668593] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 2.672595] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 2.680595] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 2.684591] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 2.692592] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 2.696596] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 2.704601] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 2.712595] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 2.716595] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 2.724596] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 2.728606] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 2.736619] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 2.740616] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 2.748621] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 2.752616] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 2.760615] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 2.764618] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 2.772616] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 2.776622] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 2.784617] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 2.788616] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 2.796623] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 2.800617] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 2.808616] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 2.812614] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 2.820593] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 2.824595] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 2.832593] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 2.836599] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 2.844597] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 2.848592] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 2.856754] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 2.864587] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 2.868584] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 2.876584] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 2.880583] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 2.888584] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 2.892583] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 2.900584] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 2.906176] iommu: Default domain type: Translated [ 2.912561] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.916647] pps_core: LinuxPPS API ver. 1 registered [ 2.920534] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.932555] PTP clock support registered [ 2.936555] EDAC MC: Ver: 3.0.0 [ 2.940824] NetLabel: Initializing [ 2.940824] NetLabel: domain hash size = 128 [ 2.948534] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 2.952556] NetLabel: unlabeled traffic allowed by default [ 2.956534] PCI: Using ACPI for IRQ routing [ 2.967502] PCI: pci_cache_line_size set to 64 bytes [ 2.967629] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] [ 2.967632] e820: reserve RAM buffer [mem 0x7de2c000-0x7fffffff] [ 2.968560] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 2.972532] pci 0000:07:01.0: vgaarb: bridge control possible [ 2.972532] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 2.988543] vgaarb: loaded [ 2.993248] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 3.000534] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 3.008533] clocksource: Switched to clocksource tsc-early [ 3.014219] VFS: Disk quotas dquot_6.6.0 [ 3.018168] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.025238] AppArmor: AppArmor Filesystem Enabled [ 3.029972] pnp: PnP ACPI init [ 3.033190] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 3.039812] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 3.046421] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 3.053034] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 3.059784] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 3.066890] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 3.072816] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 3.080100] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 3.086226] pnp 00:07: [dma 0 disabled] [ 3.086458] pnp 00:08: [dma 0 disabled] [ 3.086742] system 00:09: [io 0x0400-0x0453] has been reserved [ 3.092664] system 00:09: [io 0x0458-0x047f] has been reserved [ 3.098582] system 00:09: [io 0x1180-0x119f] has been reserved [ 3.104501] system 00:09: [io 0x0500-0x057f] has been reserved [ 3.110428] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 3.117044] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 3.124007] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 3.130721] system 00:0a: [io 0x0454-0x0457] has been reserved [ 3.136927] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 3.144166] pnp: PnP ACPI: found 12 devices [ 3.154876] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.163835] NET: Registered PF_INET protocol family [ 3.168896] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 3.179231] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 3.187801] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.195634] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 3.203938] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 3.211737] TCP: Hash tables configured (established 65536 bind 65536) [ 3.218364] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 3.225917] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.232745] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.240034] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.245705] NET: Registered PF_XDP protocol family [ 3.250519] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.255499] pci 0000:00:01.1: PCI bridge to [bus 02] [ 3.260472] pci 0000:00:03.0: PCI bridge to [bus 03] [ 3.265447] pci 0000:00:11.0: PCI bridge to [bus 04] [ 3.270415] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 3.276518] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.284264] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 3.289231] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 3.295328] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 3.302119] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 3.307085] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 3.313182] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 3.319974] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 3.324943] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 3.331729] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.339471] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 3.345656] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 3.351834] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 3.358015] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 3.364195] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.371067] pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.377941] pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.384900] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.391862] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 3.397435] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.404655] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 3.410226] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 3.416495] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 3.422066] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 3.428333] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 3.434601] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.441820] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 3.448001] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 3.454179] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 3.460359] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 3.466541] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.473412] pci_bus 0000:07: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.480286] pci_bus 0000:07: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.487246] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.494300] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 3.525655] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 23717 usecs [ 3.553642] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 20089 usecs [ 3.561151] PCI: CLS 64 bytes, default 64 [ 3.565208] DMAR: No SATC found [ 3.565239] Trying to unpack rootfs image as initramfs... [ 3.568357] DMAR: dmar0: Using Queued invalidation [ 3.568443] pci 0000:00:00.0: Adding to iommu group 0 [ 3.583653] pci 0000:00:01.0: Adding to iommu group 1 [ 3.588730] pci 0000:00:01.1: Adding to iommu group 2 [ 3.593820] pci 0000:00:03.0: Adding to iommu group 3 [ 3.598907] pci 0000:00:04.0: Adding to iommu group 4 [ 3.603991] pci 0000:00:04.1: Adding to iommu group 5 [ 3.609067] pci 0000:00:04.2: Adding to iommu group 6 [ 3.614148] pci 0000:00:04.3: Adding to iommu group 7 [ 3.619228] pci 0000:00:04.4: Adding to iommu group 8 [ 3.624308] pci 0000:00:04.5: Adding to iommu group 9 [ 3.629384] pci 0000:00:04.6: Adding to iommu group 10 [ 3.634550] pci 0000:00:04.7: Adding to iommu group 11 [ 3.639718] pci 0000:00:05.0: Adding to iommu group 12 [ 3.644885] pci 0000:00:05.2: Adding to iommu group 13 [ 3.650047] pci 0000:00:05.4: Adding to iommu group 14 [ 3.655213] pci 0000:00:11.0: Adding to iommu group 15 [ 3.660405] pci 0000:00:16.0: Adding to iommu group 16 [ 3.665575] pci 0000:00:16.1: Adding to iommu group 16 [ 3.670751] pci 0000:00:1a.0: Adding to iommu group 17 [ 3.675927] pci 0000:00:1c.0: Adding to iommu group 18 [ 3.681104] pci 0000:00:1c.1: Adding to iommu group 19 [ 3.686268] pci 0000:00:1d.0: Adding to iommu group 20 [ 3.691436] pci 0000:00:1e.0: Adding to iommu group 21 [ 3.696644] pci 0000:00:1f.0: Adding to iommu group 22 [ 3.701812] pci 0000:00:1f.2: Adding to iommu group 22 [ 3.706980] pci 0000:00:1f.3: Adding to iommu group 22 [ 3.712152] pci 0000:00:1f.6: Adding to iommu group 22 [ 3.717328] pci 0000:04:00.0: Adding to iommu group 23 [ 3.722499] pci 0000:05:00.0: Adding to iommu group 24 [ 3.727664] pci 0000:06:00.0: Adding to iommu group 25 [ 3.732813] pci 0000:07:01.0: Adding to iommu group 21 [ 3.738000] pci 0000:ff:08.0: Adding to iommu group 26 [ 3.743180] pci 0000:ff:09.0: Adding to iommu group 27 [ 3.748390] pci 0000:ff:0a.0: Adding to iommu group 28 [ 3.753559] pci 0000:ff:0a.1: Adding to iommu group 28 [ 3.758734] pci 0000:ff:0a.2: Adding to iommu group 28 [ 3.763904] pci 0000:ff:0a.3: Adding to iommu group 28 [ 3.769093] pci 0000:ff:0b.0: Adding to iommu group 29 [ 3.774264] pci 0000:ff:0b.3: Adding to iommu group 29 [ 3.779462] pci 0000:ff:0c.0: Adding to iommu group 30 [ 3.784630] pci 0000:ff:0c.1: Adding to iommu group 30 [ 3.789829] pci 0000:ff:0d.0: Adding to iommu group 31 [ 3.794996] pci 0000:ff:0d.1: Adding to iommu group 31 [ 3.800181] pci 0000:ff:0e.0: Adding to iommu group 32 [ 3.805357] pci 0000:ff:0e.1: Adding to iommu group 32 [ 3.810527] pci 0000:ff:0f.0: Adding to iommu group 33 [ 3.815696] pci 0000:ff:0f.1: Adding to iommu group 34 [ 3.820866] pci 0000:ff:0f.2: Adding to iommu group 35 [ 3.826031] pci 0000:ff:0f.3: Adding to iommu group 36 [ 3.831198] pci 0000:ff:0f.4: Adding to iommu group 37 [ 3.836367] pci 0000:ff:0f.5: Adding to iommu group 38 [ 3.841538] pci 0000:ff:10.0: Adding to iommu group 39 [ 3.846712] pci 0000:ff:10.1: Adding to iommu group 40 [ 3.851878] pci 0000:ff:10.2: Adding to iommu group 41 [ 3.857048] pci 0000:ff:10.3: Adding to iommu group 42 [ 3.862218] pci 0000:ff:10.4: Adding to iommu group 43 [ 3.867384] pci 0000:ff:10.5: Adding to iommu group 44 [ 3.872553] pci 0000:ff:10.6: Adding to iommu group 45 [ 3.877729] pci 0000:ff:10.7: Adding to iommu group 46 [ 3.882943] pci 0000:ff:13.0: Adding to iommu group 47 [ 3.888120] pci 0000:ff:13.1: Adding to iommu group 47 [ 3.893299] pci 0000:ff:13.4: Adding to iommu group 47 [ 3.898474] pci 0000:ff:13.5: Adding to iommu group 47 [ 3.903691] pci 0000:ff:16.0: Adding to iommu group 48 [ 3.908869] pci 0000:ff:16.1: Adding to iommu group 48 [ 3.914048] pci 0000:ff:16.2: Adding to iommu group 48 [ 3.923083] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 3.929535] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.935978] software IO TLB: mapped [mem 0x0000000079e2c000-0x000000007de2c000] (64MB) [ 3.944486] Initialise system trusted keyrings [ 3.948953] Key type blacklist registered [ 3.953036] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 3.961336] zbud: loaded [ 3.964203] integrity: Platform Keyring initialized [ 3.969098] integrity: Machine keyring initialized [ 3.973891] Key type asymmetric registered [ 3.977987] Asymmetric key parser 'x509' registered [ 4.011799] Freeing initrd memory: 40392K [ 4.023242] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 4.029024] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 4.036465] io scheduler mq-deadline registered [ 4.043429] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.050247] Monitor-Mwait will be used to enter C-1 state [ 4.050260] Monitor-Mwait will be used to enter C-2 state [ 4.050267] ACPI: \_SB_.SCK0.C000: Found 2 idle states [ 4.060341] ERST: Error Record Serialization Table (ERST) support is initialized. [ 4.067831] pstore: Registered erst as persistent store backend [ 4.073947] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.080389] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.088501] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.096748] Linux agpgart interface v0.103 [ 4.100994] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 4.110169] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 4.117054] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 4.126920] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.131892] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.137136] mousedev: PS/2 mouse device common for all mice [ 4.142756] rtc_cmos 00:02: RTC can wake from S4 [ 4.147680] rtc_cmos 00:02: registered as rtc0 [ 4.152161] rtc_cmos 00:02: setting system clock to 2024-10-03T14:48:23 UTC (1727966903) [ 4.160298] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.168127] intel_pstate: Intel P-state driver initializing [ 4.174024] ledtrig-cpu: registered to indicate activity on CPUs [ 4.198487] NET: Registered PF_INET6 protocol family [ 4.211209] Segment Routing with IPv6 [ 4.214901] In-situ OAM (IOAM) with IPv6 [ 4.218869] mip6: Mobile IPv6 [ 4.221849] NET: Registered PF_PACKET protocol family [ 4.226988] mpls_gso: MPLS GSO support [ 4.231224] microcode: sig=0x306e4, pf=0x8, revision=0x42e [ 4.236775] microcode: Microcode Update Driver: v2.2. [ 4.236783] IPI shorthand broadcast: enabled [ 4.246150] sched_clock: Marking stable (3256572034, 989540184)->(4639788710, -393676492) [ 4.254573] registered taskstats version 1 [ 4.258688] Loading compiled-in X.509 certificates [ 4.302643] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.311366] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 4.322043] zswap: loaded using pool lzo/zbud [ 4.326656] Key type .fscrypt registered [ 4.330591] Key type fscrypt-provisioning registered [ 4.335860] pstore: Using crash dump compression: deflate [ 4.348760] Key type encrypted registered [ 4.352788] AppArmor: AppArmor sha1 policy hashing enabled [ 4.358284] ima: No TPM chip found, activating TPM-bypass! [ 4.363767] ima: Allocated hash algorithm: sha256 [ 4.368487] ima: No architecture policies found [ 4.373034] evm: Initialising EVM extended attributes: [ 4.378170] evm: security.selinux [ 4.381486] evm: security.SMACK64 (disabled) [ 4.385755] evm: security.SMACK64EXEC (disabled) [ 4.390374] evm: security.SMACK64TRANSMUTE (disabled) [ 4.395426] evm: security.SMACK64MMAP (disabled) [ 4.400047] evm: security.apparmor [ 4.403453] evm: security.ima [ 4.406426] evm: security.capability [ 4.410006] evm: HMAC attrs: 0x1 [ 4.594051] clk: Disabling unused clocks [ 4.599682] Freeing unused decrypted memory: 2036K [ 4.605185] Freeing unused kernel image (initmem) memory: 2796K [ 4.611209] Write protecting the kernel read-only data: 26624k [ 4.617847] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 4.624808] Freeing unused kernel image (rodata/data gap) memory: 1168K [ 4.718174] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.724618] x86/mm: Checking user space page tables [ 4.804895] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.811340] Run /init as init process [ 4.815008] with arguments: [ 4.815010] /init [ 4.815011] with environment: [ 4.815012] HOME=/ [ 4.815014] TERM=linux [ 4.815015] BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 [ 4.957569] tsc: Refined TSC clocksource calibration: 1799.999 MHz [ 4.963769] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 4.973801] clocksource: Switched to clocksource tsc [ 5.042491] SCSI subsystem initialized [ 5.049562] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 5.058038] ACPI: bus type USB registered [ 5.062561] usbcore: registered new interface driver usbfs [ 5.068064] usbcore: registered new interface driver hub [ 5.079518] usbcore: registered new device driver usb [ 5.079769] i2c i2c-0: 1/6 memory slots populated (from DMI) [ 5.090254] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 5.091260] e1000e: Intel(R) PRO/1000 Network Driver [ 5.104450] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 5.111673] libata version 3.00 loaded. [ 5.111684] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.130768] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.136028] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.143483] ehci-pci 0000:00:1a.0: debug port 2 [ 5.148949] ahci 0000:00:1f.2: version 3.0 [ 5.153308] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 5.159460] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 5.167648] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 5.175697] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.180647] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 5.181522] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.197276] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.204495] usb usb1: Product: EHCI Host Controller [ 5.209374] usb usb1: Manufacturer: Linux 6.1.0-25-amd64 ehci_hcd [ 5.215467] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.220300] hub 1-0:1.0: USB hub found [ 5.220626] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 5.224066] hub 1-0:1.0: 2 ports detected [ 5.230511] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 5.234186] scsi host0: ahci [ 5.234576] scsi host1: ahci [ 5.234846] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.234854] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.234871] ehci-pci 0000:00:1d.0: debug port 2 [ 5.238819] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 5.253662] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.257739] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:13:33:8c [ 5.257743] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 5.257829] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.258060] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.261814] isci 0000:04:00.0: OEM parameter table found in OROM [ 5.264347] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.269952] isci 0000:04:00.0: OEM SAS parameters (version: 1.0) loaded (platform) [ 5.275676] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.283845] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 5.284020] scsi host2: ahci [ 5.285680] scsi host4: ahci [ 5.286015] scsi host5: ahci [ 5.286299] scsi host6: ahci [ 5.286369] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 32 [ 5.286373] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 32 [ 5.286376] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 32 [ 5.286378] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 32 [ 5.286381] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 32 [ 5.286384] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 32 [ 5.290461] usb usb2: Product: EHCI Host Controller [ 5.290463] usb usb2: Manufacturer: Linux 6.1.0-25-amd64 ehci_hcd [ 5.290464] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.290643] hub 2-0:1.0: USB hub found [ 5.299942] scsi host3: isci [ 5.306475] hub 2-0:1.0: 2 ports detected [ 5.311850] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 5.362926] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:13:33:8d [ 5.441649] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 5.448610] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.493629] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.600481] ata6: SATA link down (SStatus 0 SControl 300) [ 5.605924] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.612147] ata3: SATA link down (SStatus 0 SControl 300) [ 5.617566] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.617573] ata4: SATA link down (SStatus 0 SControl 300) [ 5.629580] ata5: SATA link down (SStatus 0 SControl 300) [ 5.635118] ata2: SATA link down (SStatus 0 SControl 300) [ 5.640561] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 5.647730] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.655022] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.657407] ata1.00: configured for UDMA/133 [ 5.663219] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.667675] hub 1-1:1.0: USB hub found [ 5.674720] scsi: waiting for bus probes to complete ... [ 5.678547] hub 1-1:1.0: 6 ports detected [ 5.733830] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 5.745037] e1000e 0000:05:00.0 enx0cc47a13338c: renamed from eth0 [ 5.770044] e1000e 0000:06:00.0 enx0cc47a13338d: renamed from eth1 [ 5.770551] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.777892] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.783911] sd 0:0:0:0: [sda] Write Protect is off [ 5.792086] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.796872] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.804021] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.804593] hub 2-1:1.0: USB hub found [ 5.813092] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 5.816922] hub 2-1:1.0: 8 ports detected [ 5.846513] sda: sda1 sda2 < sda5 > [ 5.850309] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.977600] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 6.091755] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 6.100124] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.107431] usb 1-1.1: Product: Hermon USB hidmouse Device [ 6.112924] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 6.133949] hid: raw HID events driver (C) Jiri Kosina [ 6.149707] usbcore: registered new interface driver usbhid [ 6.155307] usbhid: USB HID core driver [ 6.162711] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input3 [ 6.177693] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 6.192758] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input4 [ 6.284500] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.296727] device-mapper: uevent: version 1.0.3 [ 6.301473] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 6.361697] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 6.897876] PM: Image not found (code -22) [ 7.324681] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 7.336314] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 7.529772] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 9.088268] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 9.119140] ACPI: button: Power Button [PWRB] [ 9.127260] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 9.134742] ACPI: button: Power Button [PWRF] [ 9.194204] dca service started, version 1.12.1 [ 9.202155] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 9.385714] IPMI message handler: version 39.2 [ 9.403181] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 9.469197] ipmi device interface [ 9.476280] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.503791] ipmi_si: IPMI System Interface driver [ 9.509582] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 9.515951] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 9.523312] ipmi_si: Adding SMBIOS-specified kcs state machine [ 9.529348] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 9.535392] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 9.560624] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 9.568561] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 9.574350] RAPL PMU: hw unit of domain package 2^-16 Joules [ 9.580031] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 9.598133] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 9.606836] ipmi_si: Adding ACPI-specified kcs state machine [ 9.614140] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 9.624880] cryptd: max_cpu_qlen set to 1000 [ 9.699255] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 9.705899] ACPI: bus type drm_connector registered [ 9.730476] iTCO_vendor_support: vendor-support=0 [ 9.774538] AVX version of gcm_enc/dec engaged. [ 9.779180] AES CTR mode by8 optimization enabled [ 9.830427] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 9.912511] mgag200 0000:07:01.0: vgaarb: deactivate vga console [ 9.918576] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 9.923490] Console: switching to colour dummy device 80x25 [ 9.946460] [drm] Initialized mgag200 1.0.0 20110418 for 0000:07:01.0 on minor 0 [ 9.955697] fbcon: mgag200drmfb (fb0) is primary device [ 9.966015] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x0703, dev_id: 0x20) [ 9.998112] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 10.037689] ipmi_ssif: IPMI SSIF Interface driver [ 10.324018] Console: switching to colour frame buffer device 128x48 [ 10.421667] mgag200 0000:07:01.0: [drm] fb0: mgag200drmfb frame buffer device [ 10.713759] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.713781] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.713786] EDAC sbridge: Seeking for: PCI ID 8086:0e60 [ 10.713792] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.713798] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.713800] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.713806] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.713808] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.713814] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.713816] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.713822] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.713824] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.713830] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.713832] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.713838] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.713840] EDAC sbridge: Seeking for: PCI ID 8086:0e68 [ 10.713845] EDAC sbridge: Seeking for: PCI ID 8086:0e79 [ 10.713851] EDAC sbridge: Seeking for: PCI ID 8086:0e6a [ 10.713856] EDAC sbridge: Seeking for: PCI ID 8086:0e6b [ 10.713861] EDAC sbridge: Seeking for: PCI ID 8086:0e6c [ 10.713866] EDAC sbridge: Seeking for: PCI ID 8086:0e6d [ 10.713871] EDAC sbridge: Seeking for: PCI ID 8086:0eb8 [ 10.713876] EDAC sbridge: Seeking for: PCI ID 8086:0ebc [ 10.713881] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.713888] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.713889] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.713896] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.713897] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.713904] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.713999] EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT) [ 10.725058] EDAC sbridge: Ver: 1.1.2 [ 10.817467] intel_rapl_common: Found RAPL domain package [ 10.822800] intel_rapl_common: Found RAPL domain core [ 10.827862] intel_rapl_common: Found RAPL domain dram [ 11.843186] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 13.066606] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 13.083994] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 13.140832] Adding 1949692k swap on /dev/mapper/fiano0--vg-swap_1. Priority:-2 extents:1 across:1949692k FS [ 13.675378] audit: type=1400 audit(1727966913.216:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1065 comm="apparmor_parser" [ 13.690586] audit: type=1400 audit(1727966913.220:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1066 comm="apparmor_parser" [ 13.705968] audit: type=1400 audit(1727966913.224:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1066 comm="apparmor_parser" [ 13.740260] audit: type=1400 audit(1727966913.280:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1068 comm="apparmor_parser" [ 13.755550] audit: type=1400 audit(1727966913.280:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1068 comm="apparmor_parser" [ 13.770493] audit: type=1400 audit(1727966913.284:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1068 comm="apparmor_parser" [ 13.896243] audit: type=1400 audit(1727966913.436:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=1079 comm="apparmor_parser" [ 13.946599] audit: type=1400 audit(1727966913.488:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1067 comm="apparmor_parser" [ 13.964602] audit: type=1400 audit(1727966913.488:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1067 comm="apparmor_parser" [ 13.983422] audit: type=1400 audit(1727966913.492:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1067 comm="apparmor_parser" [ 17.146638] e1000e 0000:05:00.0 enx0cc47a13338c: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 17.156873] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a13338c: link becomes ready