[ 0.000000] microcode: microcode updated early to revision 0x42e, date = 2019-03-14 [ 0.000000] Linux version 6.1.0-25-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.106-3 (2024-08-26) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007de2bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1799.968 MHz processor [ 0.000921] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000925] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000936] last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.001076] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001721] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved [ 0.001731] last_pfn = 0x7de2c max_arch_pfn = 0x400000000 [ 0.018538] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] [ 0.018564] Using GB pages for direct mapping [ 0.018897] RAMDISK: [mem 0x3310b000-0x3587cfff] [ 0.018905] ACPI: Early table checksum verification disabled [ 0.018910] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.018916] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.018925] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.018933] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.018938] ACPI: FACS 0x000000007E1D8080 000040 [ 0.018943] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.018948] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.018953] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.018958] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.018963] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.018968] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.018974] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.018979] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.018984] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.018989] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.018994] ACPI: DMAR 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.018999] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.019003] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.019006] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.019007] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.019009] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.019010] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.019011] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.019013] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.019014] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.019015] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.019017] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.019018] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.019020] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.019021] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.019022] ACPI: Reserving DMAR table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.019024] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.019094] No NUMA configuration found [ 0.019095] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] [ 0.019111] NODE_DATA(0) allocated [mem 0x27ffd3000-0x27fffdfff] [ 0.019572] Zone ranges: [ 0.019573] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.019576] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.019579] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.019581] Device empty [ 0.019583] Movable zone start for each node [ 0.019587] Early memory node ranges [ 0.019588] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.019590] node 0: [mem 0x0000000000100000-0x000000007de2bfff] [ 0.019592] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.019595] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.019603] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.019661] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.027899] On node 0, zone Normal: 8660 pages in unavailable ranges [ 0.028195] ACPI: PM-Timer IO Port: 0x408 [ 0.028207] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.028210] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.028211] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.028212] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.028225] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.028231] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.028235] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028238] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.028245] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028247] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.028253] TSC deadline timer available [ 0.028255] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.028276] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028280] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.028281] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.028282] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.028284] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.028286] PM: hibernation: Registered nosave memory: [mem 0x7de2c000-0x7debafff] [ 0.028287] PM: hibernation: Registered nosave memory: [mem 0x7debb000-0x7dfc3fff] [ 0.028289] PM: hibernation: Registered nosave memory: [mem 0x7dfc4000-0x7e1e0fff] [ 0.028290] PM: hibernation: Registered nosave memory: [mem 0x7e1e1000-0x7f36afff] [ 0.028291] PM: hibernation: Registered nosave memory: [mem 0x7f36b000-0x7f7fffff] [ 0.028292] PM: hibernation: Registered nosave memory: [mem 0x7f800000-0x7fffffff] [ 0.028294] PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff] [ 0.028295] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.028296] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff] [ 0.028297] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff] [ 0.028298] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.028301] [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.028302] Booting paravirtualized kernel on bare hardware [ 0.028306] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.035589] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.035982] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.035991] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.035995] pcpu-alloc: [0] 0 1 2 3 [ 0.036036] Fallback order for Node 0: 0 [ 0.036041] Built 1 zonelists, mobility grouping on. Total pages: 2055603 [ 0.036043] Policy zone: Normal [ 0.036045] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.036115] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64", will be passed to user space. [ 0.036129] random: crng init done [ 0.037174] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.037742] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.037831] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.037843] software IO TLB: area num 4. [ 0.078720] Memory: 2033056K/8353556K available (14342K kernel code, 2335K rwdata, 9072K rodata, 2796K init, 17396K bss, 305212K reserved, 0K cma-reserved) [ 0.078933] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.078954] Kernel/User page tables isolation: enabled [ 0.079009] ftrace: allocating 40246 entries in 158 pages [ 0.089360] ftrace: allocated 158 pages with 5 groups [ 0.090303] Dynamic Preempt: voluntary [ 0.090347] rcu: Preemptible hierarchical RCU implementation. [ 0.090348] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.090350] Trampoline variant of Tasks RCU enabled. [ 0.090351] Rude variant of Tasks RCU enabled. [ 0.090352] Tracing variant of Tasks RCU enabled. [ 0.090353] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.090354] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.097766] NR_IRQS: 524544, nr_irqs: 864, preallocated irqs: 16 [ 0.097966] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.102520] Console: colour VGA+ 80x25 [ 1.026996] printk: console [ttyS0] enabled [ 1.031202] ACPI: Core revision 20220331 [ 1.035852] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 1.044991] APIC: Switch to symmetric I/O mode setup [ 1.049973] DMAR: Host address width 46 [ 1.053823] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 1.059150] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de [ 1.067071] DMAR: RMRR base: 0x0000007de91000 end: 0x0000007de9dfff [ 1.073337] DMAR: ATSR flags: 0x0 [ 1.076649] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 1.082924] DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0 [ 1.089283] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0 [ 1.095636] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 1.101034] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 1.110160] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 1.115554] x2apic enabled [ 1.118281] Switched APIC routing to cluster x2apic. [ 1.123793] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.148992] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f20b6a59e, max_idle_ns: 440795250954 ns [ 1.159509] Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.93 BogoMIPS (lpj=7199872) [ 1.163540] CPU0: Thermal monitoring enabled (TM1) [ 1.167592] process: using mwait in idle threads [ 1.171509] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 1.175507] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 1.179510] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.183508] Spectre V2 : Mitigation: Retpolines [ 1.187507] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.191507] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.195507] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 1.199508] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.203507] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 1.207507] MDS: Mitigation: Clear CPU buffers [ 1.211507] MMIO Stale Data: Unknown: No mitigations [ 1.215512] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.219507] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.223507] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.227507] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.231507] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.260075] Freeing SMP alternatives memory: 36K [ 1.263508] pid_max: default: 32768 minimum: 301 [ 1.267540] LSM: Security Framework initializing [ 1.271525] landlock: Up and running. [ 1.275507] Yama: disabled by default; enable with sysctl kernel.yama.* [ 1.279540] AppArmor: AppArmor initialized [ 1.283509] TOMOYO Linux initialized [ 1.287514] LSM support for eBPF active [ 1.291553] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.295523] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.304056] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2403 v2 @ 1.80GHz (family: 0x6, model: 0x3e, stepping: 0x4) [ 1.307696] cblist_init_generic: Setting adjustable number of callback queues. [ 1.311508] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.315538] cblist_init_generic: Setting adjustable number of callback queues. [ 1.319507] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.323530] cblist_init_generic: Setting adjustable number of callback queues. [ 1.327507] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.331529] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 1.335509] ... version: 3 [ 1.339507] ... bit width: 48 [ 1.343507] ... generic registers: 8 [ 1.347507] ... value mask: 0000ffffffffffff [ 1.351507] ... max period: 00007fffffffffff [ 1.355507] ... fixed-purpose events: 3 [ 1.359507] ... event mask: 00000007000000ff [ 1.363740] signal: max sigframe size: 1776 [ 1.367531] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 1.371539] rcu: Hierarchical SRCU implementation. [ 1.375508] rcu: Max phase no-delay instances is 1000. [ 1.380175] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.383604] smp: Bringing up secondary CPUs ... [ 1.387654] x86: Booting SMP configuration: [ 1.391513] .... node #0, CPUs: #1 #2 #3 [ 1.406879] smp: Brought up 1 node, 4 CPUs [ 1.411508] smpboot: Max logical packages: 1 [ 1.415507] smpboot: Total of 4 processors activated (14399.74 BogoMIPS) [ 1.440591] node 0 deferred pages initialised in 20ms [ 1.443971] devtmpfs: initialized [ 1.447587] x86/mm: Memory block size: 128MB [ 1.452546] ACPI: PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 1.455559] ACPI: PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 1.459662] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.463520] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.467569] pinctrl core: initialized pinctrl subsystem [ 1.472401] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.475790] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 1.479666] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.483664] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.487517] audit: initializing netlink subsys (disabled) [ 1.491522] audit: type=2000 audit(1727973416.404:1): state=initialized audit_enabled=0 res=1 [ 1.491658] thermal_sys: Registered thermal governor 'fair_share' [ 1.495511] thermal_sys: Registered thermal governor 'bang_bang' [ 1.499507] thermal_sys: Registered thermal governor 'step_wise' [ 1.503507] thermal_sys: Registered thermal governor 'user_space' [ 1.507507] thermal_sys: Registered thermal governor 'power_allocator' [ 1.511524] cpuidle: using governor ladder [ 1.519512] cpuidle: using governor menu [ 1.523482] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 1.523509] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.527610] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 1.531510] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 1.535517] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 1.539929] PCI: Using configuration type 1 for base access [ 1.543605] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 1.548825] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.551570] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 1.555510] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 1.563508] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 1.571507] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 1.578159] ACPI: Added _OSI(Module Device) [ 1.579510] ACPI: Added _OSI(Processor Device) [ 1.583507] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.591508] ACPI: Added _OSI(Processor Aggregator Device) [ 1.711849] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.741156] ACPI: Interpreter enabled [ 1.743530] ACPI: PM: (supports S0 S1 S4 S5) [ 1.747508] ACPI: Using IOAPIC for interrupt routing [ 1.755614] HEST: Table parsing has been initialized. [ 1.759630] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 1.763511] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.775507] PCI: Using E820 reservations for host bridge windows [ 1.780062] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.787616] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PRAD], AE_NOT_FOUND (20220331/psargs-330) [ 1.791511] ACPI Error: Aborting method \_GPE._L24 due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 1.795511] ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_L24] (20220331/evgpe-511) [ 1.799506] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.803506] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.811599] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR] [ 1.819659] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability] [ 1.827508] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.835864] PCI host bridge to bus 0000:00 [ 1.839510] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.847508] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.855507] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.859507] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.867508] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 1.875507] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.883507] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.891507] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.899508] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.903538] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.907591] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.915632] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.923607] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.927676] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.935605] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.939674] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.947545] pci 0000:00:03.0: enabling Extended Tags [ 1.951572] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.955661] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.963524] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.971652] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.975524] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.983643] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 1.991524] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 1.995641] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 2.003523] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 2.007643] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 2.015523] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 2.023641] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 2.027523] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 2.035643] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 2.039526] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 2.047642] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 2.055523] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 2.059640] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 2.067636] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 2.071631] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 2.079519] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 2.087657] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 2.091628] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 2.099649] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 2.103525] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 2.111576] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 2.115596] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 2.123525] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 2.131575] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 2.135609] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 2.143524] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 2.147598] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.155612] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 2.159606] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.167538] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 2.171509] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 2.179610] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 2.183607] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.191538] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 2.195509] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 2.203630] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 2.207524] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 2.215599] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.219612] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.227653] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 2.231723] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 2.239520] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 2.243514] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 2.251514] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 2.255514] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 2.263514] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 2.267514] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 2.271551] pci 0000:00:1f.2: PME# supported from D3hot [ 2.279597] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 2.283525] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 2.291531] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 2.295583] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 2.303528] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 2.311669] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.315559] pci 0000:00:01.1: PCI bridge to [bus 02] [ 2.319557] pci 0000:00:03.0: PCI bridge to [bus 03] [ 2.323592] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 2.331530] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 2.339522] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 2.347516] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 2.351533] pci 0000:04:00.0: enabling Extended Tags [ 2.355614] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 2.363508] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 2.375762] pci 0000:00:11.0: PCI bridge to [bus 04] [ 2.379510] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 2.383515] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 2.391605] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 2.399543] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 2.403544] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 2.411526] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 2.415696] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 2.423728] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 2.427510] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 2.435510] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 2.443608] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 2.447542] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 2.455544] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 2.459526] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 2.467693] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 2.471722] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 2.475510] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 2.483510] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 2.491530] pci_bus 0000:07: extended config space not accessible [ 2.495533] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 2.503523] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 2.507516] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 2.515516] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 2.523554] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.531618] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 2.535512] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 2.543514] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 2.551508] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 2.559507] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 2.567507] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 2.575507] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 2.587507] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 2.595507] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 2.603507] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 2.611507] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 2.624302] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 2.627512] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.639526] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 2.647508] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 2.655573] PCI host bridge to bus 0000:ff [ 2.659509] pci_bus 0000:ff: root bus resource [bus ff] [ 2.663521] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 2.671586] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 2.675576] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 2.683567] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 2.687566] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 2.695569] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 2.699573] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 2.707564] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 2.715566] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 2.719565] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 2.727569] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 2.731564] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 2.739568] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 2.743570] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 2.751583] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 2.755595] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 2.763590] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 2.767590] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 2.775589] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 2.779589] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 2.787592] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 2.791594] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 2.799597] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 2.803591] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 2.811589] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 2.815590] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 2.823591] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 2.827589] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 2.835587] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 2.839567] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 2.847572] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 2.851567] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 2.859569] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 2.863566] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 2.871565] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 2.879726] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 2.883561] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 2.891558] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 2.895558] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 2.903557] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 2.907557] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 2.915569] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 2.919559] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 2.929133] iommu: Default domain type: Translated [ 2.931508] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.939606] pps_core: LinuxPPS API ver. 1 registered [ 2.943508] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.951510] PTP clock support registered [ 2.955447] EDAC MC: Ver: 3.0.0 [ 2.959768] NetLabel: Initializing [ 2.963175] NetLabel: domain hash size = 128 [ 2.967509] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 2.975529] NetLabel: unlabeled traffic allowed by default [ 2.979508] PCI: Using ACPI for IRQ routing [ 2.990508] PCI: pci_cache_line_size set to 64 bytes [ 2.990634] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] [ 2.990637] e820: reserve RAM buffer [mem 0x7de2c000-0x7fffffff] [ 2.991545] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 2.995506] pci 0000:07:01.0: vgaarb: bridge control possible [ 2.995506] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.011515] vgaarb: loaded [ 3.016234] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 3.023508] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 3.031507] clocksource: Switched to clocksource tsc-early [ 3.037214] VFS: Disk quotas dquot_6.6.0 [ 3.041163] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.048224] AppArmor: AppArmor Filesystem Enabled [ 3.052961] pnp: PnP ACPI init [ 3.056178] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 3.062796] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 3.069405] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 3.076017] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 3.082761] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 3.089864] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 3.095790] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 3.103069] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 3.109187] pnp 00:07: [dma 0 disabled] [ 3.109426] pnp 00:08: [dma 0 disabled] [ 3.109712] system 00:09: [io 0x0400-0x0453] has been reserved [ 3.115639] system 00:09: [io 0x0458-0x047f] has been reserved [ 3.121564] system 00:09: [io 0x1180-0x119f] has been reserved [ 3.127481] system 00:09: [io 0x0500-0x057f] has been reserved [ 3.133403] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 3.140013] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 3.146974] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 3.153692] system 00:0a: [io 0x0454-0x0457] has been reserved [ 3.159888] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 3.167133] pnp: PnP ACPI: found 12 devices [ 3.177831] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.186792] NET: Registered PF_INET protocol family [ 3.191851] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 3.202180] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 3.210748] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.218580] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 3.226880] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 3.234672] TCP: Hash tables configured (established 65536 bind 65536) [ 3.241299] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 3.248853] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.255682] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.262970] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.268638] NET: Registered PF_XDP protocol family [ 3.273452] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.278432] pci 0000:00:01.1: PCI bridge to [bus 02] [ 3.283405] pci 0000:00:03.0: PCI bridge to [bus 03] [ 3.288382] pci 0000:00:11.0: PCI bridge to [bus 04] [ 3.293347] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 3.299449] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.307196] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 3.312163] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 3.318258] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 3.325049] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 3.330017] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 3.336111] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 3.342903] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 3.347871] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 3.354657] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.362399] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 3.368583] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 3.374760] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 3.380941] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 3.387121] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.393992] pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.400866] pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.407826] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.414787] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 3.420357] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.427578] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 3.433150] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 3.439416] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 3.444988] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 3.451254] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 3.457519] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.464741] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 3.470918] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 3.477099] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 3.483279] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 3.489456] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.496331] pci_bus 0000:07: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.503204] pci_bus 0000:07: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.510161] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.517214] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 3.549623] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 24744 usecs [ 3.581610] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 23993 usecs [ 3.589113] PCI: CLS 64 bytes, default 64 [ 3.593166] DMAR: No SATC found [ 3.593200] Trying to unpack rootfs image as initramfs... [ 3.596311] DMAR: dmar0: Using Queued invalidation [ 3.596389] pci 0000:00:00.0: Adding to iommu group 0 [ 3.611622] pci 0000:00:01.0: Adding to iommu group 1 [ 3.616702] pci 0000:00:01.1: Adding to iommu group 2 [ 3.621785] pci 0000:00:03.0: Adding to iommu group 3 [ 3.626864] pci 0000:00:04.0: Adding to iommu group 4 [ 3.631940] pci 0000:00:04.1: Adding to iommu group 5 [ 3.637022] pci 0000:00:04.2: Adding to iommu group 6 [ 3.642099] pci 0000:00:04.3: Adding to iommu group 7 [ 3.647178] pci 0000:00:04.4: Adding to iommu group 8 [ 3.652258] pci 0000:00:04.5: Adding to iommu group 9 [ 3.657334] pci 0000:00:04.6: Adding to iommu group 10 [ 3.662503] pci 0000:00:04.7: Adding to iommu group 11 [ 3.667668] pci 0000:00:05.0: Adding to iommu group 12 [ 3.672832] pci 0000:00:05.2: Adding to iommu group 13 [ 3.678000] pci 0000:00:05.4: Adding to iommu group 14 [ 3.683171] pci 0000:00:11.0: Adding to iommu group 15 [ 3.688356] pci 0000:00:16.0: Adding to iommu group 16 [ 3.693526] pci 0000:00:16.1: Adding to iommu group 16 [ 3.698700] pci 0000:00:1a.0: Adding to iommu group 17 [ 3.703868] pci 0000:00:1c.0: Adding to iommu group 18 [ 3.709038] pci 0000:00:1c.1: Adding to iommu group 19 [ 3.714204] pci 0000:00:1d.0: Adding to iommu group 20 [ 3.719371] pci 0000:00:1e.0: Adding to iommu group 21 [ 3.724581] pci 0000:00:1f.0: Adding to iommu group 22 [ 3.729747] pci 0000:00:1f.2: Adding to iommu group 22 [ 3.734909] pci 0000:00:1f.3: Adding to iommu group 22 [ 3.740079] pci 0000:00:1f.6: Adding to iommu group 22 [ 3.745253] pci 0000:04:00.0: Adding to iommu group 23 [ 3.750426] pci 0000:05:00.0: Adding to iommu group 24 [ 3.755589] pci 0000:06:00.0: Adding to iommu group 25 [ 3.760737] pci 0000:07:01.0: Adding to iommu group 21 [ 3.765924] pci 0000:ff:08.0: Adding to iommu group 26 [ 3.771106] pci 0000:ff:09.0: Adding to iommu group 27 [ 3.776320] pci 0000:ff:0a.0: Adding to iommu group 28 [ 3.781488] pci 0000:ff:0a.1: Adding to iommu group 28 [ 3.786654] pci 0000:ff:0a.2: Adding to iommu group 28 [ 3.791830] pci 0000:ff:0a.3: Adding to iommu group 28 [ 3.797026] pci 0000:ff:0b.0: Adding to iommu group 29 [ 3.802195] pci 0000:ff:0b.3: Adding to iommu group 29 [ 3.807393] pci 0000:ff:0c.0: Adding to iommu group 30 [ 3.812559] pci 0000:ff:0c.1: Adding to iommu group 30 [ 3.817751] pci 0000:ff:0d.0: Adding to iommu group 31 [ 3.822917] pci 0000:ff:0d.1: Adding to iommu group 31 [ 3.828110] pci 0000:ff:0e.0: Adding to iommu group 32 [ 3.833285] pci 0000:ff:0e.1: Adding to iommu group 32 [ 3.838453] pci 0000:ff:0f.0: Adding to iommu group 33 [ 3.843619] pci 0000:ff:0f.1: Adding to iommu group 34 [ 3.848784] pci 0000:ff:0f.2: Adding to iommu group 35 [ 3.853950] pci 0000:ff:0f.3: Adding to iommu group 36 [ 3.859116] pci 0000:ff:0f.4: Adding to iommu group 37 [ 3.864280] pci 0000:ff:0f.5: Adding to iommu group 38 [ 3.869447] pci 0000:ff:10.0: Adding to iommu group 39 [ 3.874625] pci 0000:ff:10.1: Adding to iommu group 40 [ 3.879795] pci 0000:ff:10.2: Adding to iommu group 41 [ 3.884959] pci 0000:ff:10.3: Adding to iommu group 42 [ 3.890125] pci 0000:ff:10.4: Adding to iommu group 43 [ 3.895293] pci 0000:ff:10.5: Adding to iommu group 44 [ 3.900466] pci 0000:ff:10.6: Adding to iommu group 45 [ 3.905629] pci 0000:ff:10.7: Adding to iommu group 46 [ 3.910840] pci 0000:ff:13.0: Adding to iommu group 47 [ 3.916013] pci 0000:ff:13.1: Adding to iommu group 47 [ 3.921184] pci 0000:ff:13.4: Adding to iommu group 47 [ 3.926359] pci 0000:ff:13.5: Adding to iommu group 47 [ 3.931560] pci 0000:ff:16.0: Adding to iommu group 48 [ 3.936734] pci 0000:ff:16.1: Adding to iommu group 48 [ 3.941909] pci 0000:ff:16.2: Adding to iommu group 48 [ 3.950939] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 3.957392] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.963834] software IO TLB: mapped [mem 0x0000000079e2c000-0x000000007de2c000] (64MB) [ 3.972331] Initialise system trusted keyrings [ 3.976799] Key type blacklist registered [ 3.980894] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 3.989181] zbud: loaded [ 3.992044] integrity: Platform Keyring initialized [ 3.996937] integrity: Machine keyring initialized [ 4.001730] Key type asymmetric registered [ 4.005835] Asymmetric key parser 'x509' registered [ 4.039726] Freeing initrd memory: 40392K [ 4.051212] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 4.056997] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 4.064431] io scheduler mq-deadline registered [ 4.071398] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.078210] Monitor-Mwait will be used to enter C-1 state [ 4.078224] Monitor-Mwait will be used to enter C-2 state [ 4.078230] ACPI: \_SB_.SCK0.C000: Found 2 idle states [ 4.088350] ERST: Error Record Serialization Table (ERST) support is initialized. [ 4.095843] pstore: Registered erst as persistent store backend [ 4.101927] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.108366] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.116469] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.124687] Linux agpgart interface v0.103 [ 4.128929] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 4.138071] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 4.144949] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 4.154820] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.159796] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.165041] mousedev: PS/2 mouse device common for all mice [ 4.170656] rtc_cmos 00:02: RTC can wake from S4 [ 4.175552] rtc_cmos 00:02: registered as rtc0 [ 4.180037] rtc_cmos 00:02: setting system clock to 2024-10-03T16:37:01 UTC (1727973421) [ 4.188168] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.195986] intel_pstate: Intel P-state driver initializing [ 4.201875] ledtrig-cpu: registered to indicate activity on CPUs [ 4.226355] NET: Registered PF_INET6 protocol family [ 4.239606] Segment Routing with IPv6 [ 4.243299] In-situ OAM (IOAM) with IPv6 [ 4.247257] mip6: Mobile IPv6 [ 4.250233] NET: Registered PF_PACKET protocol family [ 4.255391] mpls_gso: MPLS GSO support [ 4.259660] microcode: sig=0x306e4, pf=0x8, revision=0x42e [ 4.265208] microcode: Microcode Update Driver: v2.2. [ 4.265217] IPI shorthand broadcast: enabled [ 4.274580] sched_clock: Marking stable (3285038186, 989506942)->(4642439503, -367894375) [ 4.283002] registered taskstats version 1 [ 4.287121] Loading compiled-in X.509 certificates [ 4.331665] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.340393] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 4.351064] zswap: loaded using pool lzo/zbud [ 4.355652] Key type .fscrypt registered [ 4.359579] Key type fscrypt-provisioning registered [ 4.364848] pstore: Using crash dump compression: deflate [ 4.378682] Key type encrypted registered [ 4.382720] AppArmor: AppArmor sha1 policy hashing enabled [ 4.388216] ima: No TPM chip found, activating TPM-bypass! [ 4.393698] ima: Allocated hash algorithm: sha256 [ 4.398416] ima: No architecture policies found [ 4.402958] evm: Initialising EVM extended attributes: [ 4.408093] evm: security.selinux [ 4.411411] evm: security.SMACK64 (disabled) [ 4.415685] evm: security.SMACK64EXEC (disabled) [ 4.420303] evm: security.SMACK64TRANSMUTE (disabled) [ 4.425356] evm: security.SMACK64MMAP (disabled) [ 4.429976] evm: security.apparmor [ 4.433379] evm: security.ima [ 4.436347] evm: security.capability [ 4.439925] evm: HMAC attrs: 0x1 [ 4.622442] clk: Disabling unused clocks [ 4.628293] Freeing unused decrypted memory: 2036K [ 4.633823] Freeing unused kernel image (initmem) memory: 2796K [ 4.639841] Write protecting the kernel read-only data: 26624k [ 4.646424] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 4.653405] Freeing unused kernel image (rodata/data gap) memory: 1168K [ 4.746649] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.753093] x86/mm: Checking user space page tables [ 4.833385] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.839825] Run /init as init process [ 4.843486] with arguments: [ 4.843488] /init [ 4.843490] with environment: [ 4.843491] HOME=/ [ 4.843492] TERM=linux [ 4.843493] BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 [ 4.989538] tsc: Refined TSC clocksource calibration: 1799.999 MHz [ 4.995734] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 5.005772] clocksource: Switched to clocksource tsc [ 5.062557] e1000e: Intel(R) PRO/1000 Network Driver [ 5.067534] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 5.073868] ACPI: bus type USB registered [ 5.077937] usbcore: registered new interface driver usbfs [ 5.083448] usbcore: registered new interface driver hub [ 5.088795] usbcore: registered new device driver usb [ 5.089130] SCSI subsystem initialized [ 5.094151] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.113436] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 5.119428] i2c i2c-0: 1/6 memory slots populated (from DMI) [ 5.125104] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 5.144101] libata version 3.00 loaded. [ 5.147179] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.152458] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.161506] ehci-pci 0000:00:1a.0: debug port 2 [ 5.162889] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 5.170175] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 5.185014] ahci 0000:00:1f.2: version 3.0 [ 5.193535] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.195599] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 5.199369] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.207489] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 5.215749] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.229997] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a6 [ 5.230968] usb usb1: Product: EHCI Host Controller [ 5.238887] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 5.243758] usb usb1: Manufacturer: Linux 6.1.0-25-amd64 ehci_hcd [ 5.250710] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.256722] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.263728] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.268221] hub 1-0:1.0: USB hub found [ 5.281103] hub 1-0:1.0: 2 ports detected [ 5.285473] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.285626] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 5.291422] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.294135] scsi host0: ahci [ 5.297176] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 5.304575] ehci-pci 0000:00:1d.0: debug port 2 [ 5.307518] scsi host1: ahci [ 5.318256] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 5.319535] scsi host2: ahci [ 5.325840] isci 0000:04:00.0: OEM parameter table found in OROM [ 5.328246] scsi host3: ahci [ 5.330635] isci 0000:04:00.0: OEM SAS parameters (version: 1.0) loaded (platform) [ 5.335733] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 5.336801] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 5.337816] scsi host5: ahci [ 5.338263] scsi host6: ahci [ 5.338425] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 32 [ 5.338430] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 32 [ 5.338432] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 32 [ 5.338435] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 32 [ 5.338437] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 32 [ 5.338440] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 32 [ 5.339556] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.349855] scsi host4: isci [ 5.354746] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.390906] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a7 [ 5.391150] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.398547] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 5.405935] usb usb2: Product: EHCI Host Controller [ 5.413412] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.419076] usb usb2: Manufacturer: Linux 6.1.0-25-amd64 ehci_hcd [ 5.469886] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.474752] hub 2-0:1.0: USB hub found [ 5.478526] hub 2-0:1.0: 2 ports detected [ 5.605557] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.652426] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.658649] ata2: SATA link down (SStatus 0 SControl 300) [ 5.664074] ata5: SATA link down (SStatus 0 SControl 300) [ 5.669522] ata3: SATA link down (SStatus 0 SControl 300) [ 5.674952] ata4: SATA link down (SStatus 0 SControl 300) [ 5.680381] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 5.687195] ata6: SATA link down (SStatus 0 SControl 300) [ 5.692980] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.700920] ata1.00: configured for UDMA/133 [ 5.705278] scsi: waiting for bus probes to complete ... [ 5.741572] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.770250] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.778450] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.785925] hub 1-1:1.0: USB hub found [ 5.789746] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 5.789921] hub 1-1:1.0: 6 ports detected [ 5.804296] e1000e 0000:05:00.0 enx002590eb25a6: renamed from eth0 [ 5.828192] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.835872] sd 0:0:0:0: [sda] Write Protect is off [ 5.840678] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.840700] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.841127] e1000e 0000:06:00.0 enx002590eb25a7: renamed from eth1 [ 5.849761] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 5.879580] sda: sda1 sda2 < sda5 > [ 5.883375] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.910062] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.918252] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.925766] hub 2-1:1.0: USB hub found [ 5.929581] hub 2-1:1.0: 8 ports detected [ 6.097547] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 6.199267] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.211496] device-mapper: uevent: version 1.0.3 [ 6.216275] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 6.225985] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 6.234343] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.241651] usb 1-1.1: Product: Hermon USB hidmouse Device [ 6.247155] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 6.263250] hid: raw HID events driver (C) Jiri Kosina [ 6.274074] usbcore: registered new interface driver usbhid [ 6.279669] usbhid: USB HID core driver [ 6.285975] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input3 [ 6.300841] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 6.315728] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input4 [ 6.465689] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 6.812791] PM: Image not found (code -22) [ 7.199042] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 7.210761] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 7.412806] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 8.986035] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 9.009580] ACPI: button: Power Button [PWRB] [ 9.014069] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 9.021564] ACPI: button: Power Button [PWRF] [ 9.113868] dca service started, version 1.12.1 [ 9.211309] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 9.279607] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.285075] iTCO_vendor_support: vendor-support=0 [ 9.303937] IPMI message handler: version 39.2 [ 9.313984] ipmi device interface [ 9.338505] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 9.391514] ipmi_si: IPMI System Interface driver [ 9.396315] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 9.402679] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 9.409907] ipmi_si: Adding SMBIOS-specified kcs state machine [ 9.415813] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 9.421885] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 9.433559] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 9.441477] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 9.447229] RAPL PMU: hw unit of domain package 2^-16 Joules [ 9.452896] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 9.460703] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 9.506970] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 9.545876] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 9.554584] ipmi_si: Adding ACPI-specified kcs state machine [ 9.560317] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 9.560590] cryptd: max_cpu_qlen set to 1000 [ 9.639217] AVX version of gcm_enc/dec engaged. [ 9.643815] AES CTR mode by8 optimization enabled [ 9.687477] ACPI: bus type drm_connector registered [ 9.865587] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 9.953657] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x0703, dev_id: 0x20) [ 9.965096] mgag200 0000:07:01.0: vgaarb: deactivate vga console [ 9.976263] Console: switching to colour dummy device 80x25 [ 9.988050] [drm] Initialized mgag200 1.0.0 20110418 for 0000:07:01.0 on minor 0 [ 9.997547] fbcon: mgag200drmfb (fb0) is primary device [ 10.000481] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 10.056540] ipmi_ssif: IPMI SSIF Interface driver [ 10.364805] Console: switching to colour frame buffer device 128x48 [ 10.450213] mgag200 0000:07:01.0: [drm] fb0: mgag200drmfb frame buffer device [ 10.631925] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.631951] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.631957] EDAC sbridge: Seeking for: PCI ID 8086:0e60 [ 10.631965] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.631973] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.631977] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.631986] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.631990] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.631998] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.632002] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.632010] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.632014] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.632022] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.632026] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.632034] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.632038] EDAC sbridge: Seeking for: PCI ID 8086:0e68 [ 10.632045] EDAC sbridge: Seeking for: PCI ID 8086:0e79 [ 10.632053] EDAC sbridge: Seeking for: PCI ID 8086:0e6a [ 10.632061] EDAC sbridge: Seeking for: PCI ID 8086:0e6b [ 10.632069] EDAC sbridge: Seeking for: PCI ID 8086:0e6c [ 10.632076] EDAC sbridge: Seeking for: PCI ID 8086:0e6d [ 10.632084] EDAC sbridge: Seeking for: PCI ID 8086:0eb8 [ 10.632092] EDAC sbridge: Seeking for: PCI ID 8086:0ebc [ 10.632100] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.632109] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.632112] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.632121] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.632123] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.632133] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.632275] EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT) [ 10.643348] EDAC sbridge: Ver: 1.1.2 [ 10.767310] intel_rapl_common: Found RAPL domain package [ 10.772646] intel_rapl_common: Found RAPL domain core [ 10.777707] intel_rapl_common: Found RAPL domain dram [ 11.838744] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 13.112155] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 13.129821] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 13.178155] Adding 1949692k swap on /dev/mapper/fiano1--vg-swap_1. Priority:-2 extents:1 across:1949692k FS [ 13.869615] audit: type=1400 audit(1727973430.500:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1066 comm="apparmor_parser" [ 13.885626] audit: type=1400 audit(1727973430.500:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1066 comm="apparmor_parser" [ 13.901529] audit: type=1400 audit(1727973430.504:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1065 comm="apparmor_parser" [ 13.934069] audit: type=1400 audit(1727973430.564:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1068 comm="apparmor_parser" [ 13.949238] audit: type=1400 audit(1727973430.564:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1068 comm="apparmor_parser" [ 13.964175] audit: type=1400 audit(1727973430.564:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1068 comm="apparmor_parser" [ 14.126158] audit: type=1400 audit(1727973430.756:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=1086 comm="apparmor_parser" [ 14.141943] audit: type=1400 audit(1727973430.772:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1067 comm="apparmor_parser" [ 14.159932] audit: type=1400 audit(1727973430.772:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1067 comm="apparmor_parser" [ 14.177384] audit: type=1400 audit(1727973430.776:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1067 comm="apparmor_parser" [ 17.210604] e1000e 0000:05:00.0 enx002590eb25a6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 17.220390] IPv6: ADDRCONF(NETDEV_CHANGE): enx002590eb25a6: link becomes ready