[ 0.000000] Linux version 6.1.112+ (osstest@pinot0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Thu Oct 3 14:33:00 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000458] tsc: Detected 2199.998 MHz processor [ 0.000892] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000896] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000902] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000904] Disabled [ 0.000905] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000909] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000948] Kernel/User page tables isolation: disabled on XEN PV. [ 0.028007] RAMDISK: [mem 0x04000000-0x05423fff] [ 0.028015] ACPI: Early table checksum verification disabled [ 0.028608] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028619] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028655] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028703] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028719] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028734] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028750] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028766] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028781] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028797] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028817] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028833] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028849] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028865] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028881] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028896] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028914] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028929] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028945] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028961] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028976] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028992] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.029000] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.029002] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.029003] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.029004] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.029005] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.029006] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.029007] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.029008] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.029009] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.029010] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.029011] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.029012] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.029013] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.029014] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.029015] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.029016] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.029017] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.029018] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.029019] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.029020] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.029064] Setting APIC routing to Xen PV. [ 0.032917] Zone ranges: [ 0.032918] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032920] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032922] Normal empty [ 0.032923] Movable zone start for each node [ 0.032924] Early memory node ranges [ 0.032924] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032926] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032928] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032933] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032969] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034520] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034525] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221947] Remapped 102 page(s) [ 0.223318] ACPI: PM-Timer IO Port: 0x408 [ 0.223370] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223373] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223375] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223376] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223378] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223379] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223381] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223382] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223410] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223423] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223426] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223451] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223456] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223526] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223540] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223543] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223544] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223546] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223550] Booting kernel on Xen [ 0.223551] Xen version: 4.20-unstable (preserve-AD) [ 0.223554] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229763] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.230047] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.230054] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.230058] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230135] xen: PV spinlocks enabled [ 0.230138] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230143] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230145] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230182] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230191] random: crng init done [ 0.230240] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230265] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231550] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231553] software IO TLB: area num 8. [ 0.288428] Memory: 389292K/524284K available (14349K kernel code, 2686K rwdata, 4584K rodata, 1580K init, 1288K bss, 134740K reserved, 0K cma-reserved) [ 0.288596] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.291082] Dynamic Preempt: voluntary [ 0.291181] rcu: Preemptible hierarchical RCU implementation. [ 0.291181] rcu: RCU event tracing is enabled. [ 0.291182] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.291184] Trampoline variant of Tasks RCU enabled. [ 0.291185] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.291186] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.301655] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.301778] xen:events: Using FIFO-based ABI [ 0.301802] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.301810] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.301817] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.301825] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.301832] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.301839] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.301846] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.301853] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.301861] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.301868] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.301875] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.301883] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.301890] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.301898] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.301906] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.301916] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.307252] Console: colour VGA+ 80x25 [ 0.321890] printk: console [tty0] enabled [ 0.323197] printk: console [hvc0] enabled [ 0.323336] ACPI: Core revision 20220331 [ 0.338828] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.338991] Xen: using vcpuop timer interface [ 0.338999] installing Xen timer for CPU 0 [ 0.339147] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.339304] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199998) [ 0.339630] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.339746] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.339873] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.340020] Spectre V2 : Mitigation: Retpolines [ 0.340132] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.340450] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.340568] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.340688] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.340834] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.340951] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.341101] MDS: Mitigation: Clear CPU buffers [ 0.341213] TAA: Mitigation: Clear CPU buffers [ 0.341307] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.341471] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.341615] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.341738] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.341856] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.341974] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.359636] Freeing SMP alternatives memory: 40K [ 0.359761] pid_max: default: 32768 minimum: 301 [ 0.360326] LSM: Security Framework initializing [ 0.360446] SELinux: Initializing. [ 0.360585] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.360730] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.361395] cpu 0 spinlock event irq 25 [ 0.361514] VPMU disabled by hypervisor. [ 0.361948] cblist_init_generic: Setting adjustable number of callback queues. [ 0.362093] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.362248] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.362308] signal: max sigframe size: 1776 [ 0.362469] rcu: Hierarchical SRCU implementation. [ 0.362583] rcu: Max phase no-delay instances is 400. [ 0.363070] smp: Bringing up secondary CPUs ... [ 0.363401] installing Xen timer for CPU 1 [ 0.363869] cpu 1 spinlock event irq 35 [ 0.364441] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.364607] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.364793] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.365514] installing Xen timer for CPU 2 [ 0.365990] cpu 2 spinlock event irq 41 [ 0.366360] installing Xen timer for CPU 3 [ 0.366812] cpu 3 spinlock event irq 47 [ 0.366812] installing Xen timer for CPU 4 [ 0.367641] cpu 4 spinlock event irq 53 [ 0.367641] installing Xen timer for CPU 5 [ 0.368477] cpu 5 spinlock event irq 59 [ 0.368511] installing Xen timer for CPU 6 [ 0.369355] cpu 6 spinlock event irq 65 [ 0.369560] installing Xen timer for CPU 7 [ 0.369988] cpu 7 spinlock event irq 71 [ 0.370526] smp: Brought up 1 node, 8 CPUs [ 0.370650] smpboot: Max logical packages: 1 [ 0.370866] devtmpfs: initialized [ 0.370866] x86/mm: Memory block size: 128MB [ 0.371535] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.371602] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.371757] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.372309] PM: RTC time: 17:10:17, date: 2024-10-03 [ 0.372560] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.372702] xen:grant_table: Grant tables using version 1 layout [ 0.372837] Grant table initialized [ 0.373137] audit: initializing netlink subsys (disabled) [ 0.373328] audit: type=2000 audit(1727975417.569:1): state=initialized audit_enabled=0 res=1 [ 0.373375] thermal_sys: Registered thermal governor 'step_wise' [ 0.373375] thermal_sys: Registered thermal governor 'user_space' [ 0.373503] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.373926] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.374310] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.498176] PCI: Using configuration type 1 for base access [ 0.500813] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.501395] ACPI: Added _OSI(Module Device) [ 0.501472] ACPI: Added _OSI(Processor Device) [ 0.501589] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.501702] ACPI: Added _OSI(Processor Aggregator Device) [ 0.532327] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.534315] xen: registering gsi 9 triggering 0 polarity 0 [ 0.537058] ACPI: Dynamic OEM Table Load: [ 0.540302] ACPI: Interpreter enabled [ 0.540302] ACPI: PM: (supports S0 S4 S5) [ 0.540302] ACPI: Using IOAPIC for interrupt routing [ 0.540302] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.541309] PCI: Using E820 reservations for host bridge windows [ 0.541889] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.568377] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.568506] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.568739] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.568999] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.569119] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.569293] PCI host bridge to bus 0000:ff [ 0.569308] pci_bus 0000:ff: root bus resource [bus ff] [ 0.569501] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.569952] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.570380] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.570801] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.571445] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.571865] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.572307] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.572728] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.573173] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.573607] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.574238] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.574613] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.575240] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.575610] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.576042] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.576462] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.576882] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.577307] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.577560] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.578022] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.578490] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.579168] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.579633] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.580096] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.580563] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.581018] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.581442] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.582094] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.582562] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.583229] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.583655] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.584110] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.584534] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.584956] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.585382] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.585812] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.586282] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.586841] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.587307] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.587821] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.588241] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.588614] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.589040] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.589286] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.589630] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.590056] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.590617] pci_bus 0000:ff: on NUMA node 0 [ 0.595087] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.595214] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.595435] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.595777] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.595895] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.596380] PCI host bridge to bus 0000:00 [ 0.596494] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.596614] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.596733] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.596876] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.597213] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.597371] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.598214] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.598708] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.599075] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.599597] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.599982] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.600496] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.600849] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.601365] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.601737] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.602462] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.602829] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.603346] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.603524] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.604109] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.604302] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.605446] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.605675] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.606142] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.606499] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.606716] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.607178] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.607480] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.607697] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.608157] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.608517] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.608718] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.609251] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.609518] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.610072] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.610271] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.610316] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.618483] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.619041] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.619235] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.619315] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.619604] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.620160] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.620355] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.620476] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.620758] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.621312] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.621505] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.621626] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.621947] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.622142] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.622680] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.622997] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.623746] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.623944] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.624107] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.624263] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.624348] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.624505] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.624661] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.624970] pci 0000:00:1f.2: PME# supported from D3hot [ 0.625251] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.625404] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.625647] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.626036] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.626257] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.626916] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.627215] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.627525] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.627736] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.628496] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.628708] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.629413] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.629625] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.630328] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.630540] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.631241] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.631325] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.631663] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.631875] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.632163] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.632346] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.632695] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.632914] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.633035] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.633237] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.633306] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.633881] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.634092] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.634374] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.634557] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.634911] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.635112] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.635231] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.635356] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.635476] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.636029] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.636163] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.636300] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.636584] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.636874] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.637234] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.637306] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.637512] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.637727] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.637891] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.638423] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.638901] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.639025] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.639153] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.639507] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.639626] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.639830] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.640050] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.640214] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.640715] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.641176] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.641301] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.641439] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.641776] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.642167] pci 0000:09:00.0: enabling Extended Tags [ 0.642504] pci 0000:09:00.0: supports D1 D2 [ 0.642616] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.642975] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.643100] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.643233] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.643488] pci_bus 0000:0a: extended config space not accessible [ 0.643658] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.643861] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.644028] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.644219] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.644543] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.644831] pci 0000:0a:00.0: supports D1 D2 [ 0.644943] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.645380] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.645549] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.645677] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.646062] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.646261] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.646396] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.646556] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.647073] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.647306] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.647450] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.647666] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.647808] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.648386] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.648586] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.648793] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.648953] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.649471] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.649702] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.649845] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.650060] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.650203] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.650670] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.650874] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.651082] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.651242] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.651697] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.651924] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.652067] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.652317] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.652460] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.652978] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.653178] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.653383] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.653551] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.654059] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.654286] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.654306] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.654522] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.654664] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.655245] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.655316] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.655444] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.655582] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.656055] pci_bus 0000:00: on NUMA node 0 [ 0.656152] xen: registering gsi 13 triggering 1 polarity 0 [ 0.657112] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.657310] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.657504] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.657691] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.657878] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.657995] ACPI: PCI: Interrupt link LNKE disabled [ 0.658177] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.658294] ACPI: PCI: Interrupt link LNKF disabled [ 0.658378] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.658495] ACPI: PCI: Interrupt link LNKG disabled [ 0.658677] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.658799] ACPI: PCI: Interrupt link LNKH disabled [ 0.659061] xen:balloon: Initialising balloon driver [ 0.659375] iommu: Default domain type: Translated [ 0.666307] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.666490] SCSI subsystem initialized [ 0.667334] libata version 3.00 loaded. [ 0.667362] ACPI: bus type USB registered [ 0.667496] usbcore: registered new interface driver usbfs [ 0.667618] usbcore: registered new interface driver hub [ 0.667738] usbcore: registered new device driver usb [ 0.667865] pps_core: LinuxPPS API ver. 1 registered [ 0.667865] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.667865] PTP clock support registered [ 0.668352] Advanced Linux Sound Architecture Driver Initialized. [ 0.668602] NetLabel: Initializing [ 0.668713] NetLabel: domain hash size = 128 [ 0.668825] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.668825] NetLabel: unlabeled traffic allowed by default [ 0.668825] PCI: Using ACPI for IRQ routing [ 0.703694] PCI: pci_cache_line_size set to 64 bytes [ 0.704470] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.704473] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.705354] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.705476] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.705592] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.705739] vgaarb: loaded [ 0.707306] clocksource: Switched to clocksource tsc-early [ 0.707357] VFS: Disk quotas dquot_6.6.0 [ 0.707676] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.707820] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.707979] pnp: PnP ACPI init [ 0.708461] xen: registering gsi 8 triggering 1 polarity 0 [ 0.708619] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.708742] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.708860] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.708977] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.709095] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.709212] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.709343] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.709479] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.709605] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.709729] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.709848] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.709967] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.710086] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.710520] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.710644] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.710761] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.710878] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.711003] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.711447] xen: registering gsi 4 triggering 1 polarity 0 [ 0.711452] Already setup the GSI :4 [ 0.711565] pnp 00:03: [dma 0 disabled] [ 0.711876] xen: registering gsi 3 triggering 1 polarity 0 [ 0.711888] pnp 00:04: [dma 0 disabled] [ 0.712495] pnp: PnP ACPI: found 5 devices [ 0.743665] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.743822] NET: Registered PF_INET protocol family [ 0.743981] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.744359] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.744509] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.744654] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.744803] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.744970] TCP: Hash tables configured (established 4096 bind 4096) [ 0.745111] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.745233] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.745433] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.745804] RPC: Registered named UNIX socket transport module. [ 0.745930] RPC: Registered udp transport module. [ 0.746043] RPC: Registered tcp transport module. [ 0.746155] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.746694] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.746867] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.747029] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.747216] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.747379] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.747555] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.747727] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.747860] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.748021] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.748143] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.748287] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.748454] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.748601] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.748722] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.748865] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.749007] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.749151] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.749273] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.749437] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.749582] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.749726] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.749856] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.749999] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.750141] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.750285] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.750444] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.750578] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.750748] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.750920] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.751093] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.751218] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.751390] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.751553] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.751672] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.751810] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.751970] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.752090] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.752230] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.752421] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.752544] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.752689] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.752852] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.753008] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.753159] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.753324] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.753493] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.753646] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.753798] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.753949] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.754107] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.754226] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.754391] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.754530] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.754702] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.754850] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.754968] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.755086] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.755205] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.755338] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.755483] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.755601] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.755744] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.755859] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.755977] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.756092] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.756210] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.756332] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.756471] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.756588] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.756706] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.756826] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.756944] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.757519] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.757743] xen: registering gsi 19 triggering 0 polarity 1 [ 0.757770] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.766593] xen: registering gsi 18 triggering 0 polarity 1 [ 0.766611] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.783739] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 16795 usecs [ 0.783985] xen: registering gsi 18 triggering 0 polarity 1 [ 0.783991] Already setup the GSI :18 [ 0.799620] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 15325 usecs [ 0.799832] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.800005] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.800081] Unpacking initramfs... [ 0.800123] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.800482] kvm: no hardware support for 'kvm_intel' [ 0.808248] has_svm: not amd or hygon [ 0.808392] kvm: no hardware support for 'kvm_amd' [ 0.808510] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.808824] clocksource: Switched to clocksource tsc [ 0.811153] Initialise system trusted keyrings [ 0.811470] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.812988] NFS: Registering the id_resolver key type [ 0.813113] Key type id_resolver registered [ 0.813224] Key type id_legacy registered [ 0.813461] 9p: Installing v9fs 9p2000 file system support [ 0.828150] Key type asymmetric registered [ 0.828275] Asymmetric key parser 'x509' registered [ 0.828421] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.828576] io scheduler mq-deadline registered [ 0.828728] io scheduler kyber registered [ 0.829796] xen: registering gsi 16 triggering 0 polarity 1 [ 0.829827] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.830363] xen: registering gsi 16 triggering 0 polarity 1 [ 0.830369] Already setup the GSI :16 [ 0.831003] xen: registering gsi 16 triggering 0 polarity 1 [ 0.831008] Already setup the GSI :16 [ 0.831327] xen: registering gsi 16 triggering 0 polarity 1 [ 0.831331] Already setup the GSI :16 [ 0.831670] xen: registering gsi 16 triggering 0 polarity 1 [ 0.831674] Already setup the GSI :16 [ 0.832270] xen: registering gsi 16 triggering 0 polarity 1 [ 0.832275] Already setup the GSI :16 [ 0.832883] xen: registering gsi 16 triggering 0 polarity 1 [ 0.832888] Already setup the GSI :16 [ 0.833326] xen: registering gsi 17 triggering 0 polarity 1 [ 0.833343] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.833691] xen: registering gsi 19 triggering 0 polarity 1 [ 0.833696] Already setup the GSI :19 [ 0.834130] xen: registering gsi 16 triggering 0 polarity 1 [ 0.834134] Already setup the GSI :16 [ 0.834806] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.834980] ACPI: button: Power Button [PWRB] [ 0.835121] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.835496] ACPI: button: Power Button [PWRF] [ 0.835874] Monitor-Mwait will be used to enter C-1 state [ 0.835907] Monitor-Mwait will be used to enter C-2 state [ 0.835923] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.836286] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.836647] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.837157] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.837664] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.838083] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.838459] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.838951] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.839731] xen:xen_evtchn: Event-channel device installed [ 0.839954] xen_pciback: backend is vpci [ 0.840685] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.840989] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.841710] hpet_acpi_add: no address or irqs in _CRS [ 0.841922] Non-volatile memory driver v1.3 [ 0.842035] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.844635] loop: module loaded [ 0.851132] ahci 0000:00:1f.2: version 3.0 [ 0.851233] xen: registering gsi 16 triggering 0 polarity 1 [ 0.851242] Already setup the GSI :16 [ 0.851597] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.851747] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.867087] scsi host0: ahci [ 0.867570] scsi host1: ahci [ 0.867984] scsi host2: ahci [ 0.868340] scsi host3: ahci [ 0.868742] scsi host4: ahci [ 0.869075] scsi host5: ahci [ 0.869218] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 0.869362] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 0.869528] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 0.869673] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 0.869816] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 0.869959] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 0.870446] tun: Universal TUN/TAP device driver, 1.6 [ 0.870734] e100: Intel(R) PRO/100 Network Driver [ 0.870853] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.870989] sky2: driver version 1.30 [ 0.871176] xen_netfront: Initialising Xen virtual ethernet driver [ 0.871535] xen: registering gsi 18 triggering 0 polarity 1 [ 0.871544] Already setup the GSI :18 [ 0.871756] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.871938] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.872112] ehci-pci 0000:00:1a.0: debug port 2 [ 0.876247] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.882459] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.882737] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.882895] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.883037] usb usb1: Product: EHCI Host Controller [ 0.883151] usb usb1: Manufacturer: Linux 6.1.112+ ehci_hcd [ 0.883266] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.883570] hub 1-0:1.0: USB hub found [ 0.883694] hub 1-0:1.0: 2 ports detected [ 0.884062] xen: registering gsi 18 triggering 0 polarity 1 [ 0.884072] Already setup the GSI :18 [ 0.884270] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.884467] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.884643] ehci-pci 0000:00:1d.0: debug port 2 [ 0.888716] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.895439] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.895677] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.895824] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.895966] usb usb2: Product: EHCI Host Controller [ 0.896079] usb usb2: Manufacturer: Linux 6.1.112+ ehci_hcd [ 0.896194] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.896482] hub 2-0:1.0: USB hub found [ 0.896607] hub 2-0:1.0: 2 ports detected [ 0.897051] xen: registering gsi 19 triggering 0 polarity 1 [ 0.897060] Already setup the GSI :19 [ 0.897265] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.897462] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.898679] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.899141] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.899335] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.899494] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.899697] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.899843] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.899985] usb usb3: Product: xHCI Host Controller [ 0.900098] usb usb3: Manufacturer: Linux 6.1.112+ xhci-hcd [ 0.900213] usb usb3: SerialNumber: 0000:00:14.0 [ 0.900510] hub 3-0:1.0: USB hub found [ 0.900642] hub 3-0:1.0: 8 ports detected [ 0.901800] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.901952] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.902094] usb usb4: Product: xHCI Host Controller [ 0.902214] usb usb4: Manufacturer: Linux 6.1.112+ xhci-hcd [ 0.902329] usb usb4: SerialNumber: 0000:00:14.0 [ 0.902592] hub 4-0:1.0: USB hub found [ 0.902723] hub 4-0:1.0: 6 ports detected [ 0.903909] usbcore: registered new interface driver usblp [ 0.904050] usbcore: registered new interface driver usb-storage [ 0.904280] i8042: PNP: No PS/2 controller found. [ 0.904663] rtc_cmos 00:00: RTC can wake from S4 [ 0.905369] rtc_cmos 00:00: registered as rtc0 [ 0.905547] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.905779] device-mapper: uevent: version 1.0.3 [ 0.905962] Freeing initrd memory: 20624K [ 0.906016] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.906052] xen: registering gsi 18 triggering 0 polarity 1 [ 0.906062] Already setup the GSI :18 [ 0.906097] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.906232] intel_pstate: CPU model not supported [ 0.906262] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.906368] hid: raw HID events driver (C) Jiri Kosina [ 0.906911] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.906963] usbcore: registered new interface driver usbhid [ 0.907146] usbhid: USB HID core driver [ 0.907783] Initializing XFRM netlink socket [ 0.908044] NET: Registered PF_INET6 protocol family [ 0.908622] Segment Routing with IPv6 [ 0.908743] In-situ OAM (IOAM) with IPv6 [ 0.908887] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.909132] NET: Registered PF_PACKET protocol family [ 0.909284] 9pnet: Installing 9P2000 support [ 0.909428] Key type dns_resolver registered [ 0.910152] IPI shorthand broadcast: enabled [ 0.910291] sched_clock: Marking stable (872724402, 37383393)->(1756342662, -846234867) [ 0.910875] registered taskstats version 1 [ 0.910990] Loading compiled-in X.509 certificates [ 0.913621] PM: Magic number: 12:668:187 [ 0.913811] acpi device:46: hash matches [ 0.913965] printk: console [netcon0] enabled [ 0.914079] netconsole: network logging started [ 0.914430] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.926512] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.926852] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.927474] ALSA device list: [ 0.927531] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.927601] No soundcards found. [ 1.124430] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.132479] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.140444] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.177772] ata4: SATA link down (SStatus 0 SControl 300) [ 1.178095] ata2: SATA link down (SStatus 0 SControl 300) [ 1.178256] ata5: SATA link down (SStatus 0 SControl 300) [ 1.178413] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.178572] ata1: SATA link down (SStatus 0 SControl 300) [ 1.178712] ata6: SATA link down (SStatus 0 SControl 300) [ 1.179603] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.252927] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.253085] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.253455] hub 1-1:1.0: USB hub found [ 1.253675] hub 1-1:1.0: 4 ports detected [ 1.260951] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.261104] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.261667] hub 2-1:1.0: USB hub found [ 1.262100] hub 2-1:1.0: 4 ports detected [ 1.268087] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.268272] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.268411] usb 3-3: Product: USB2.0 Hub [ 1.268542] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.268674] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.269243] hub 3-3:1.0: USB hub found [ 1.269677] hub 3-3:1.0: 4 ports detected [ 1.296385] ata3.00: configured for UDMA/133 [ 1.296665] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.297254] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.297343] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.297612] sd 2:0:0:0: [sda] Write Protect is off [ 1.297736] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.297798] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.298029] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.317605] sda: sda1 sda2 < sda5 > [ 1.318026] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.319286] Freeing unused kernel image (initmem) memory: 1580K [ 1.319436] Write protecting the kernel read-only data: 22528k [ 1.337171] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.338486] Freeing unused kernel image (rodata/data gap) memory: 1560K [ 1.386412] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.512662] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.512815] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.513444] hub 3-4:1.0: USB hub found [ 1.513698] hub 3-4:1.0: 4 ports detected [ 1.576408] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.653781] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.653934] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.654078] usb 3-3.2: Product: USB2.0 Hub [ 1.654751] hub 3-3.2:1.0: USB hub found [ 1.655190] hub 3-3.2:1.0: 4 ports detected [ 1.797908] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.798039] Run /init as init process [ 1.798149] with arguments: [ 1.798150] /init [ 1.798151] placeholder [ 1.798152] with environment: [ 1.798153] HOME=/ [ 1.798154] TERM=linux [ 1.806421] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.911897] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.912055] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.917891] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 2.233002] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.233141] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.234352] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.234604] xen: registering gsi 16 triggering 0 polarity 1 [ 2.234614] Already setup the GSI :16 [ 2.236852] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.236975] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.237167] xen: registering gsi 16 triggering 0 polarity 1 [ 2.237174] Already setup the GSI :16 [ 2.263989] pps pps0: new PPS source ptp0 [ 2.264191] igb 0000:07:00.0: added PHC on eth0 [ 2.264324] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.264465] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.264631] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.264745] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.264977] xen: registering gsi 17 triggering 0 polarity 1 [ 2.264986] Already setup the GSI :17 [ 2.273618] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 2.274886] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 2.275236] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.294507] pps pps1: new PPS source ptp1 [ 2.294686] igb 0000:08:00.0: added PHC on eth1 [ 2.294818] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.294938] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.295102] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.295216] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.295454] xen: registering gsi 16 triggering 0 polarity 1 [ 2.295461] Already setup the GSI :16 [ 2.352826] igb 0000:0b:00.0: added PHC on eth2 [ 2.352963] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.353083] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.353286] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.353415] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.353643] xen: registering gsi 17 triggering 0 polarity 1 [ 2.353651] Already setup the GSI :17 [ 2.411183] igb 0000:0b:00.1: added PHC on eth3 [ 2.411326] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.411459] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.411662] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.411777] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.412002] xen: registering gsi 18 triggering 0 polarity 1 [ 2.412010] Already setup the GSI :18 [ 2.470224] igb 0000:0b:00.2: added PHC on eth4 [ 2.470365] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.470505] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.470707] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.470822] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.471058] xen: registering gsi 19 triggering 0 polarity 1 [ 2.471067] Already setup the GSI :19 [ 2.529298] igb 0000:0b:00.3: added PHC on eth5 [ 2.529453] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.529574] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.529776] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.529890] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.532674] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.539860] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.551664] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.559662] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.567582] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.573729] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 2.975208] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.104932] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.105059] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.404715] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.405143] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.405360] xen: registering gsi 17 triggering 0 polarity 1 [ 3.405370] Already setup the GSI :17 [ 4.144084] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.278411] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.278570] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.568344] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.570785] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.580170] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 4.992251] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.000181] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.492229] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.734113] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.754469] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.832810] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.366229] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.366414] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.366608] device enx0cc47a9f87be entered promiscuous mode [ 14.895991] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 15.106667] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 15.106923] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 15.107049] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 15.107331] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready