Oct 3 02:21:34.329555 [ 16.354248] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 02:21:34.329875 [ 16.364408] hub 2-3:1.0: 3 ports detected Oct 3 02:21:34.333665 [ 16.390115] OF: graph: no port node found in /soc/hdmi@14530000 Oct 3 02:21:34.357724 [ 16.463675] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 02:21:34.429749 [ 16.571780] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 02:21:34.537738 [ 16.666528] usb 2-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 02:21:34.633668 [ 16.680095] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 02:21:34.645689 [ 16.783951] usb 2-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=77.32 Oct 3 02:21:34.753787 [ 16.790956] usb 2-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Oct 3 02:21:34.765800 [ 16.798160] usb 2-3.2: Product: USB2.0 Hub Oct 3 02:21:34.765860 [ 16.803259] hub 2-3.2:1.0: USB hub found Oct 3 02:21:34.765906 [ 16.806468] hub 2-3.2:1.0: 4 ports detected Oct 3 02:21:34.777708 [ 17.102484] usb 2-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 02:21:35.065746 [ 17.108918] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 02:21:35.077742 [ 17.217616] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 02:21:35.185759 [ 17.228836] usb 2-3.2.4: New USB device found, idVendor=0b95, idProduct=772a, bcdDevice= 0.01 Oct 3 02:21:35.197767 [ 17.236126] usb 2-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Oct 3 02:21:35.209765 [ 17.243782] usb 2-3.2.4: Product: AX88772 Oct 3 02:21:35.209823 [ 17.247825] usb 2-3.2.4: Manufacturer: ASIX Elec. Corp. Oct 3 02:21:35.209872 [ 17.252805] usb 2-3.2.4: SerialNumber: 000001 Oct 3 02:21:35.221722 [ 17.736033] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 02:21:35.701766 [ 17.831430] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 02:21:35.797751 [ 18.428917] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 02:21:36.397775 [ 18.444593] Asix Electronics AX88772A usb-002:004:10: attached PHY driver (mii_bus:phy_addr=usb-002:004:10, irq=POLL) Oct 3 02:21:36.421761 [ 18.458449] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 7a:f3:fa:59:5e:cf Oct 3 02:21:36.433747 [ 18.473223] usbcore: registered new interface driver asix Oct 3 02:21:36.445684 done. Oct 3 02:21:36.733694 [ 19.258931] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 02:21:37.225791 Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). Oct 3 02:21:37.273681 Checking file systems.../dev/sda1: clean, 922/61056 files, 25402/243968 blocks Oct 3 02:21:38.281726 done. Oct 3 02:21:38.329717 Cleaning up temporary files... /tmp. Oct 3 02:21:38.581718 [ 20.871844] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 02:21:38.845739 [ 20.920552] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 02:21:38.893730 [ 21.153739] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k FS Oct 3 02:21:39.133742 Mounting local filesystems...done. Oct 3 02:21:39.539635 Activating swapfile swap, if any...done. Oct 3 02:21:39.539658 Cleaning up temporary files.... Oct 3 02:21:39.539813 Starting Setting kernel variables: sysctl. Oct 3 02:21:39.661628 [ 22.955545] audit: type=1400 audit(1727922101.960:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=903 comm="apparmor_parser" Oct 3 02:21:40.933628 [ 22.970173] audit: type=1400 audit(1727922101.960:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=904 comm="apparmor_parser" Oct 3 02:21:40.945628 [ 22.984472] audit: type=1400 audit(1727922101.960:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=904 comm="apparmor_parser" Oct 3 02:21:40.969568 [ 23.098570] asix 2-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 02:21:41.065598 [ 23.307745] audit: type=1400 audit(1727922102.312:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=939 comm="apparmor_parser" Oct 3 02:21:41.281631 [ 23.326966] audit: type=1400 audit(1727922102.328:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=939 comm="apparmor_parser" Oct 3 02:21:41.305636 [ 23.340386] audit: type=1400 audit(1727922102.328:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=939 comm="apparmor_parser" Oct 3 02:21:41.317615 [ 23.690638] audit: type=1400 audit(1727922102.692:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=938 comm="apparmor_parser" Oct 3 02:21:41.677633 [ 23.707113] audit: type=1400 audit(1727922102.692:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=938 comm="apparmor_parser" Oct 3 02:21:41.689629 [ 23.724862] audit: type=1400 audit(1727922102.696:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=938 comm="apparmor_parser" Oct 3 02:21:41.701628 [ 23.741922] audit: type=1400 audit(1727922102.704:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=938 comm="apparmor_parser" Oct 3 02:21:41.725607 Starting: AppArmorLoading AppArmor profiles...done. Oct 3 02:21:41.725607 . Oct 3 02:21:41.725607 [ 25.255978] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 02:21:43.225683 [ 25.256083] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 3 02:21:43.241577 Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1 Oct 3 02:21:45.041632 Copyright 2004-2022 Internet Systems Consortium. Oct 3 02:21:45.041632 All rights reserved. Oct 3 02:21:45.041632 For info, please visit https://www.isc.org/software/dhcp/ Oct 3 02:21:45.053638 Oct 3 02:21:45.053638 Listening on LPF/eth0/a6:46:13:77:e8:2f Oct 3 02:21:45.053638 Sending on LPF/eth0/a6:46:13:77:e8:2f Oct 3 02:21:45.053638 Sending on Socket/fallback Oct 3 02:21:45.065634 Created duid "\000\001\000\001.\220\2746\246F\023w\350/". Oct 3 02:21:45.065634 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 Oct 3 02:21:45.077569 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 Oct 3 02:21:46.073626 DHCPOFFER of 10.149.64.45 from 10.149.64.4 Oct 3 02:21:46.073626 DHCPREQUEST for 10.149.64.45 on eth0 to 255.255.255.255 port 67 Oct 3 02:21:46.085617 DHCPACK of 10.149.64.45 from 10.149.64.4 Oct 3 02:21:46.085617 bound to 10.149.64.45 -- renewal in 251 seconds. Oct 3 02:21:46.085617 done. Oct 3 02:21:46.085617 Cleaning up temporary files.... Oct 3 02:21:46.121594 Starting nftables: none Oct 3 02:21:46.193556 . Oct 3 02:21:46.581558 [ 28.641352] exynos-mixer 14450000.mixer: deferred probe timeout, ignoring dependency Oct 3 02:21:46.617620 [ 28.651122] exynos4-fb 14400000.fimd: deferred probe timeout, ignoring dependency Oct 3 02:21:46.617620 [ 28.657968] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations Oct 3 02:21:46.629642 [ 28.664853] exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm]) Oct 3 02:21:46.641636 [ 28.672798] exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm]) Oct 3 02:21:46.641636 [ 28.680992] exynos-drm exynos-drm: bound 14500000.dsi (ops hdmi_enable [exynosdrm]) Oct 3 02:21:46.653628 [ 28.688029] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm]) Oct 3 02:21:46.665594 INIT: [ 28.704607] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 02:21:46.677632 [ 28.709913] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 02:21:46.677632 [ 28.716924] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 Oct 3 02:21:46.689596 Entering runlevel: 2 Oct 3 02:21:46.701560 Using makefile-style concurrent boot in runlevel 2. Oct 3 02:21:46.737555 Starting Apache httpd web server: apache2. Oct 3 02:21:48.633691 Starting NTP server: ntpd2024-10-03T02:21:50 ntpd[1137]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 02:21:48.993715 2024-10-03T02:21:50 ntpd[1137]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 02:21:49.005685 . Oct 3 02:21:49.005713 Starting periodic command scheduler: cron. Oct 3 02:21:49.005739 Starting system message bus: dbus. Oct 3 02:21:49.377662 Starting OpenBSD Secure Shell server: sshd. Oct 3 02:21:49.797645 Oct 3 02:21:50.853690 Debian GNU/Linux 12 arndale-westfield ttySAC2 Oct 3 02:21:50.853729 Oct 3 02:21:50.853751 arndale-westfield login: INIT: Switching to r INIT: No inittab.d directorUsing makefile-style concurrent boot in runlevel 6. Oct 3 02:27:03.941727 Stopping SMP IRQ Balancer: irqbalance. Oct 3 02:27:04.001661 Stopping hotplug events dispatcher: systemd-udevd. Oct 3 02:27:04.025683 Stopping nftables: none. Oct 3 02:27:04.025713 Saving the system clock to /dev/rtc0. Oct 3 02:27:05.117756 Hardware Clock updated to Thu Oct 3 02:27:06 UTC 2024. Oct 3 02:27:05.129656 Stopping Apache httpd web server: apache2. Oct 3 02:27:05.153668 Asking all remaining processes to terminate...done. Oct 3 02:27:05.453663 All processes ended within 1 seconds...done. Oct 3 02:27:05.453715 Deconfiguring network interfaces...ifdown: ignoring unknown interface eth0=eth0 Oct 3 02:27:05.585674 done. Oct 3 02:27:05.585727 [ 347.837351] EXT4-fs (sda1): unmounting filesystem. Oct 3 02:27:05.801674 Deactivating swap...done. Oct 3 02:27:05.873706 Unmounting local filesystems...done. Oct 3 02:27:05.873765 [ 348.196453] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 02:27:06.161666 Will now restart. Oct 3 02:27:06.425647 [ 348.482856] asix 2-3.2.4:1.0 eth0: Link is Down Oct 3 02:27:06.449649 [ 348.527290] sd 0:0:0:0: [sda] Synchronizing SCSI cache Oct 3 02:27:06.485674 [ 348.555032] wake enabled for irq 101 (gpx1-4) Oct 3 02:27:06.521712 [ 348.557915] wake enabled for irq 102 (gpx1-5) Oct 3 02:27:06.521745 [ 348.562285] wake enabled for irq 103 (gpx1-6) Oct 3 02:27:06.521771 [ 348.566614] wake enabled for irq 104 (gpx1-7) Oct 3 02:27:06.533715 [ 348.570951] wake enabled for irq 105 (gpx2-0) Oct 3 02:27:06.533749 [ 348.575301] wake enabled for irq 106 (gpx2-1) Oct 3 02:27:06.533775 [ 348.580159] reboot: Reó Oct 3 02:27:06.881680 Oct 3 02:27:06.881693 Oct 3 02:27:06.881731 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 02:27:06.881759 Oct 3 02:27:06.881780 CPU: Exynos5250@1000MHz Oct 3 02:27:06.881804 Oct 3 02:27:06.881824 Board: Arndale Oct 3 02:27:06.881847 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 02:27:06.893676 ready Oct 3 02:27:06.893705 DRAM: 2 GiB Oct 3 02:27:06.893728 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 02:27:06.905682 trace: enabled Oct 3 02:27:06.941649 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 02:27:07.305659 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 02:27:07.365745 In: serial Oct 3 02:27:07.365775 Out: serial Oct 3 02:27:07.365798 Err: serial Oct 3 02:27:07.365820 SCSI: ARNDALE SCSI INIT Oct 3 02:27:07.377726 Target spinup took 0 ms. Oct 3 02:27:07.377726 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 02:27:07.389712 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 02:27:07.389779 Net: Net Initialization Skipped Oct 3 02:27:07.389805 No ethernet found. Oct 3 02:27:07.389827 Hostname: arndale-westfield Oct 3 02:27:07.401657 Hit any key to stop autoboot: 2  1  0 Oct 3 02:27:09.321675 (Re)start USB... Oct 3 02:27:09.321707 USB0: USB EHCI 1.00 Oct 3 02:27:09.321731 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 02:27:14.925793 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 02:27:14.925875 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 02:27:15.369727 Waiting for Ethernet connection... done. Oct 3 02:27:17.169748 BOOTP broadcast 1 Oct 3 02:27:17.169816 BOOTP broadcast 2 Oct 3 02:27:20.517748 DHCP client bound to address 10.149.64.45 (3487 ms) Oct 3 02:27:20.517816 Using asx0 device Oct 3 02:27:20.517859 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 02:27:20.529801 Filename 'pxelinux.0'. Oct 3 02:27:20.529858 Load address: 0x43e00000 Oct 3 02:27:20.529903 Loading: *### Oct 3 02:27:20.541770 2.4 MiB/s Oct 3 02:27:20.541826 done Oct 3 02:27:20.541867 Bytes transferred = 42430 (a5be hex) Oct 3 02:27:20.553826 missing environment variable: pxeuuid Oct 3 02:27:20.553886 Retrieving file: pxelinux.cfg/0A95402D Oct 3 02:27:20.553932 Using asx0 device Oct 3 02:27:20.553974 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 02:27:20.565828 Filename 'pxelinux.cfg/0A95402D'. Oct 3 02:27:20.565887 Load address: 0x51000000 Oct 3 02:27:20.565931 Loading: *# Oct 3 02:27:20.565972 31.3 KiB/s Oct 3 02:27:20.566013 done Oct 3 02:27:20.566051 Bytes transferred = 65 (41 hex) Oct 3 02:27:20.577817 Config file found Oct 3 02:27:20.577873 Ignoring unknown command: serial Oct 3 02:27:20.577918 1: local Oct 3 02:27:20.577958 scanning bus for devices... Oct 3 02:27:20.578001 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 02:27:20.613838 Type: Hard Disk Oct 3 02:27:20.613895 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 02:27:20.625813 Found 1 device(s). Oct 3 02:27:20.625871 Oct 3 02:27:20.625911 SCSI device 0: Oct 3 02:27:20.625952 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 02:27:20.626002 Type: Hard Disk Oct 3 02:27:20.626044 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 02:27:20.637807 ... is now current device Oct 3 02:27:20.637864 Scanning scsi 0... Oct 3 02:27:20.637907 Found U-Boot script /boot.scr Oct 3 02:27:20.817775 1742 bytes read in 41 ms (41 KiB/s) Oct 3 02:27:20.865828 ## Executing script at 50000000 Oct 3 02:27:20.865886 Loading dtbs/6.1.112+/exynos5250-arndale.dtb Oct 3 02:27:20.865934 46686 bytes read in 2391 ms (18.6 KiB/s) Oct 3 02:27:23.193811 1015824 bytes read in 112 ms (8.6 MiB/s) Oct 3 02:27:23.325815 Loaded xen-4.20-unstable to 0x41000000 (f8010) Oct 3 02:27:23.325876 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan Oct 3 02:27:23.337824 10039808 bytes read in 407 ms (23.5 MiB/s) Oct 3 02:27:23.757809 Loaded vmlinuz-6.1.112+ to 0x42000000 (993200) Oct 3 02:27:23.757871 command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 02:27:23.781778 12059042 bytes read in 626 ms (18.4 MiB/s) Oct 3 02:27:24.393782 Loaded initrd.img-6.1.112+ to 0x43300000 (b801a2) Oct 3 02:27:24.405820 chosen { Oct 3 02:27:24.405875 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan"; Oct 3 02:27:24.417840 #size-cells = <0x00000001>; Oct 3 02:27:24.417898 #address-cells = <0x00000001>; Oct 3 02:27:24.417942 stdout-path = "serial2:115200n8"; Oct 3 02:27:24.429824 module@1 { Oct 3 02:27:24.429878 reg = <0x43300000 0x00b801a2>; Oct 3 02:27:24.429924 compatible = "xen,linux-initrd", "xen,multiboot-module"; Oct 3 02:27:24.430009 }; Oct 3 02:27:24.441810 module@0 { Oct 3 02:27:24.441865 bootargs = "ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Oct 3 02:27:24.453836 reg = <0x42000000 0x00993200>; Oct 3 02:27:24.453893 compatible = "xen,linux-zimage", "xen,multiboot-module"; Oct 3 02:27:24.465799 }; Oct 3 02:27:24.465852 }; Oct 3 02:27:24.465891 Booting 0x41000000 - 0x43000000 Oct 3 02:27:24.465934 Kernel image @ 0x41000000 [ 0x000000 - 0x135000 ] Oct 3 02:27:24.465980 ## Flattened Device Tree blob at 43000000 Oct 3 02:27:24.477833 Booting using the fdt blob at 0x43000000 Oct 3 02:27:24.477892 reserving fdt memory region: addr=43000000 size=c000 Oct 3 02:27:24.477939 Loading Device Tree to 4fff1000, end 4fffffff ... OK Oct 3 02:27:24.489777 Oct 3 02:27:24.489829 Starting kernel ...(fake run for tracing) Oct 3 02:27:24.489874 Oct 3 02:27:24.489912 Oct 3 02:27:24.501750 Starting kernel ... Oct 3 02:27:24.501807 Oct 3 02:27:24.501845 __ __ _ _ ____ ___ _ _ _ Oct 3 02:27:24.549837 \ \/ /___ _ __ | || | |___ \ / _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Oct 3 02:27:24.561823 \ // _ \ '_ \ | || |_ __) | | | |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Oct 3 02:27:24.561886 / \ __/ | | | |__ _| / __/| |_| |__| |_| | | | \__ \ || (_| | |_) | | __/ Oct 3 02:27:24.573825 /_/\_\___|_| |_| |_|(_)_____|\___/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Oct 3 02:27:24.573888 Oct 3 02:27:24.573927 (XEN) Xen version 4.20-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Thu Oct 3 01:24:04 UTC 2024 Oct 3 02:27:24.585844 (XEN) Latest ChangeSet: Tue Oct 1 13:00:13 2024 +0100 git:633ee8b2df-dirty Oct 3 02:27:24.597830 (XEN) build-id: acdae48e9eb1245e5b7f31d344adf979e897cb42 Oct 3 02:27:24.597891 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Oct 3 02:27:24.609819 (XEN) 32-bit Execution: Oct 3 02:27:24.609875 (XEN) Processor Features: 00001031:00011011 Oct 3 02:27:24.609921 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Oct 3 02:27:24.621836 (XEN) Extensions: GenericTimer Security Oct 3 02:27:24.621895 (XEN) Debug Features: 02010555 Oct 3 02:27:24.621939 (XEN) Auxiliary Features: 00000000 Oct 3 02:27:24.633830 (XEN) Memory Model Features: 10201105 20000000 Oct 3 02:27:24.633891 (XEN) 01240000 02102211 Oct 3 02:27:24.633936 (XEN) ISA Features: 02101110 13112111 21232041 Oct 3 02:27:24.645726 (XEN) 11112131 10011142 00000000 Oct 3 02:27:24.645760 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Oct 3 02:27:24.657807 (XEN) Set SYSRAM to 0000000041000070 (00200070) Oct 3 02:27:24.657866 (XEN) SMP: Allowing 2 CPUs Oct 3 02:27:24.669832 (XEN) enabled workaround for: ARM erratum 766422 Oct 3 02:27:24.669892 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Oct 3 02:27:24.669942 (XEN) GICv2 initialization: Oct 3 02:27:24.681821 (XEN) gic_dist_addr=0000000010481000 Oct 3 02:27:24.681880 (XEN) gic_cpu_addr=0000000010482000 Oct 3 02:27:24.681925 (XEN) gic_hyp_addr=0000000010484000 Oct 3 02:27:24.693817 (XEN) gic_vcpu_addr=0000000010486000 Oct 3 02:27:24.693876 (XEN) gic_maintenance_irq=25 Oct 3 02:27:24.693921 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Oct 3 02:27:24.705823 (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2) Oct 3 02:27:24.705885 (XEN) Initializing Credit2 scheduler Oct 3 02:27:24.705929 (XEN) load_precision_shift: 18 Oct 3 02:27:24.717814 (XEN) load_window_shift: 30 Oct 3 02:27:24.717871 (XEN) underload_balance_tolerance: 0 Oct 3 02:27:24.717917 (XEN) overload_balance_tolerance: -3 Oct 3 02:27:24.717978 (XEN) runqueues arrangement: socket Oct 3 02:27:24.729792 (XEN) cap enforcement granularity: 10ms Oct 3 02:27:24.729851 (XEN) load tracking window length 1073741824 ns Oct 3 02:27:24.729897 (XEN) Allocated console ring of 16 KiB. Oct 3 02:27:24.741820 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Oct 3 02:27:24.741884 (XEN) CPU0: Guest atomics will try 1 times before pausing the domain Oct 3 02:27:24.753823 (XEN) Bringing up CPU1 Oct 3 02:27:24.753879 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Oct 3 02:27:24.753929 (XEN) Brought up 2 CPUs Oct 3 02:27:24.753970 (XEN) CPU 1 booted. Oct 3 02:27:24.765826 (XEN) I/O virtualisation disabled Oct 3 02:27:24.765884 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Oct 3 02:27:24.765932 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Oct 3 02:27:24.777825 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Oct 3 02:27:24.777887 (XEN) Initializing Credit2 scheduler Oct 3 02:27:24.777932 (XEN) load_precision_shift: 18 Oct 3 02:27:24.789828 (XEN) load_window_shift: 30 Oct 3 02:27:24.789884 (XEN) underload_balance_tolerance: 0 Oct 3 02:27:24.789929 (XEN) overload_balance_tolerance: -3 Oct 3 02:27:24.789973 (XEN) runqueues arrangement: socket Oct 3 02:27:24.801822 (XEN) cap enforcement granularity: 10ms Oct 3 02:27:24.801881 (XEN) load tracking window length 1073741824 ns Oct 3 02:27:24.801927 (XEN) Adding cpu 0 to runqueue 0 Oct 3 02:27:24.813811 (XEN) First cpu on runqueue, activating Oct 3 02:27:24.813870 (XEN) Adding cpu 1 to runqueue 0 Oct 3 02:27:24.813914 (XEN) alternatives: Patching with alt table 002c31f0 -> 002c32c8 Oct 3 02:27:24.825818 (XEN) CPU0 will execute ICIALLU on guest exit Oct 3 02:27:24.825878 (XEN) CPU1 will execute ICIALLU on guest exit Oct 3 02:27:24.825923 (XEN) *** LOADING DOMAIN 0 *** Oct 3 02:27:24.837816 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Oct 3 02:27:24.837877 (XEN) Loading ramdisk from boot module @ 0000000043300000 Oct 3 02:27:24.837925 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Oct 3 02:27:24.849776 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Oct 3 02:27:25.413797 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Oct 3 02:27:25.413860 (XEN) Allocating PPI 16 for event channel interrupt Oct 3 02:27:25.449805 (XEN) d0: extended regions not supported for 32-bit guests Oct 3 02:27:25.449866 (XEN) Loading zImage from 0000000042000000 to 0000000067600000-0000000067f93200 Oct 3 02:27:25.461738 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d801a2 Oct 3 02:27:25.557786 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b4c2 Oct 3 02:27:25.657827 (XEN) Initial low memory virq threshold set at 0x4000 pages. Oct 3 02:27:25.657894 (XEN) Scrubbing Free RAM in background Oct 3 02:27:25.657940 (XEN) Std. Loglevel: All Oct 3 02:27:25.657982 (XEN) Guest Loglevel: All Oct 3 02:27:25.669831 (XEN) *************************************************** Oct 3 02:27:25.669890 (XEN) WARNING: SILO mode is not enabled. Oct 3 02:27:25.669935 (XEN) It has implications on the security of the system, Oct 3 02:27:25.681828 (XEN) unless the communications have been forbidden between Oct 3 02:27:25.681889 (XEN) untrusted domains. Oct 3 02:27:25.681931 (XEN) *************************************************** Oct 3 02:27:25.693772 (XEN) 3... 2... 1... Oct 3 02:27:28.693807 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 02:27:28.705765 (XEN) Freed 384kB init memory. Oct 3 02:27:28.705823 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 02:27:29.761777 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Oct 3 02:27:29.785830 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Oct 3 02:27:29.785892 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Oct 3 02:27:29.797829 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Oct 3 02:27:29.797926 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 02:27:29.809771 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 02:27:29.845801 [ 0.000000] Linux version 6.1.112+ (osstest@himrod1) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Wed Oct 2 22:15:19 UTC 2024 Oct 3 02:27:29.857854 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 02:27:29.869849 [ 0.000000] CPU: div instructions available: patching division code Oct 3 02:27:29.881741 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 02:27:29.881807 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 02:27:29.893773 [ 0.000000] Memory policy: Data cache writealloc Oct 3 02:27:29.893832 [ 0.000000] Xen 4.20 support found Oct 3 02:27:29.905758 [ 0.000000] efi: UEFI not found. Oct 3 02:27:29.905817 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 Oct 3 02:27:29.905865 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 02:27:29.905910 [ 0.000000] Zone ranges: Oct 3 02:27:29.917762 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Oct 3 02:27:29.917824 [ 0.000000] Normal empty Oct 3 02:27:29.917868 [ 0.000000] HighMem empty Oct 3 02:27:29.929772 [ 0.000000] Movable zone start for each node Oct 3 02:27:29.929832 [ 0.000000] Early memory node ranges Oct 3 02:27:29.929878 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Oct 3 02:27:29.941758 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Oct 3 02:27:29.953760 [ 0.000000] psci: probing for conduit method from DT. Oct 3 02:27:29.953823 [ 0.000000] psci: PSCIv1.1 detected in firmware. Oct 3 02:27:29.953872 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Oct 3 02:27:29.965748 [ 0.000000] psci: Trusted OS migration not required Oct 3 02:27:29.965809 [ 0.000000] psci: SMC Calling Convention v1.2 Oct 3 02:27:29.977742 [ 0.000000] percpu: Embedded 16 pages/cpu s35412 r8192 d21932 u65536 Oct 3 02:27:29.977806 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 Oct 3 02:27:29.989774 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 02:27:30.001771 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 02:27:30.013699 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Oct 3 02:27:30.013736 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Oct 3 02:27:30.025788 [ 0.000000] Memory: 416844K/524288K available (14336K kernel code, 2180K rwdata, 5604K rodata, 2048K init, 438K bss, 41908K reserved, 65536K cma-reserved, 0K highmem) Oct 3 02:27:30.037783 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 02:27:30.049779 [ 0.000000] trace event string verifier disabled Oct 3 02:27:30.049839 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 02:27:30.061751 [ 0.000000] rcu: RCU event tracing is enabled. Oct 3 02:27:30.061813 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Oct 3 02:27:30.073743 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Oct 3 02:27:30.073814 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 02:27:30.085755 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 02:27:30.085818 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 02:27:30.097761 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 02:27:30.097824 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Oct 3 02:27:30.109796 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 02:27:30.121805 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 02:27:30.121877 [ 0.000012] Switching to timer-based delay loop, resolution 41ns Oct 3 02:27:30.133760 [ 0.000498] Console: colour dummy device 80x30 Oct 3 02:27:30.133820 [ 0.293141] printk: console [hvc0] enabled Oct 3 02:27:30.145744 [ 0.297333] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Oct 3 02:27:30.145819 [ 0.307733] CPU: Testing write buffer coherency: ok Oct 3 02:27:30.157764 [ 0.312676] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 02:27:30.169747 [ 0.322229] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 02:27:30.169812 [ 0.328642] pid_max: default: 32768 minimum: 301 Oct 3 02:27:30.181766 [ 0.333434] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 02:27:30.181835 [ 0.340710] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 02:27:30.193762 [ 0.349121] /cpus/cpu@0 missing clock-frequency property Oct 3 02:27:30.193823 [ 0.353913] /cpus/cpu@1 missing clock-frequency property Oct 3 02:27:30.205769 [ 0.359331] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 02:27:30.205831 [ 0.365824] xen:grant_table: Grant tables using version 1 layout Oct 3 02:27:30.217753 [ 0.371158] Grant table initialized Oct 3 02:27:30.217811 [ 0.374696] xen:events: Using FIFO-based ABI Oct 3 02:27:30.217859 [ 0.379015] Xen: initializing cpu0 Oct 3 02:27:30.229767 [ 0.382544] Setting up static identity map for 0x60300000 - 0x603000ac Oct 3 02:27:30.229831 [ 0.390302] rcu: Hierarchical SRCU implementation. Oct 3 02:27:30.241762 [ 0.393930] rcu: Max phase no-delay instances is 1000. Oct 3 02:27:30.241824 [ 0.402004] EFI services will not be available. Oct 3 02:27:30.253712 [ 0.405301] smp: Bringing up secondary CPUs ... Oct 3 02:27:30.253773 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 02:27:30.325767 [ 0.479386] Xen: initializing cpu1 Oct 3 02:27:30.325826 [ 0.479541] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 02:27:30.337746 [ 0.479570] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 02:27:30.337820 [ 0.498446] smp: Brought up 1 node, 2 CPUs Oct 3 02:27:30.349777 [ 0.502216] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 02:27:30.349840 [ 0.508528] CPU: All CPU(s) started in SVC mode. Oct 3 02:27:30.361779 [ 0.513931] devtmpfs: initialized Oct 3 02:27:30.361838 [ 0.526506] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 02:27:30.373827 [ 0.532996] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Oct 3 02:27:30.385839 [ 0.542716] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 02:27:30.397824 [ 0.550738] pinctrl core: initialized pinctrl subsystem Oct 3 02:27:30.397886 [ 0.557269] DMI not present or invalid. Oct 3 02:27:30.397933 [ 0.560370] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 02:27:30.409828 [ 0.567566] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 02:27:30.421816 [ 0.576362] thermal_sys: Registered thermal governor 'step_wise' Oct 3 02:27:30.421880 [ 0.576492] software IO TLB: area num 2. Oct 3 02:27:30.433818 [ 0.585176] software IO TLB: only able to allocate 8 MB Oct 3 02:27:30.433880 [ 0.592300] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Oct 3 02:27:30.445819 [ 0.597477] No ATAGs? Oct 3 02:27:30.445876 [ 0.599828] hw-breakpoint: Failed to enable monitor mode on CPU 0. Oct 3 02:27:30.445949 [ 0.608355] Serial: AMBA PL011 UART driver Oct 3 02:27:30.457769 [ 0.630490] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 62 Oct 3 02:27:30.481787 [ 0.679916] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 02:27:30.529792 [ 0.704487] xen:balloon: Initialising balloon driver Oct 3 02:27:30.553821 [ 0.712074] iommu: Default domain type: Translated Oct 3 02:27:30.553882 [ 0.715571] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 02:27:30.565835 [ 0.722553] SCSI subsystem initialized Oct 3 02:27:30.565894 [ 0.726141] usbcore: registered new interface driver usbfs Oct 3 02:27:30.577825 [ 0.731317] usbcore: registered new interface driver hub Oct 3 02:27:30.577886 [ 0.736713] usbcore: registered new device driver usb Oct 3 02:27:30.589824 [ 0.743344] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 02:27:30.589886 [ 0.746966] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 02:27:30.601839 [ 0.753275] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 02:27:30.602522 [ 0.761707] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 02:27:30.613842 [ 0.770841] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 02:27:30.613903 [ 0.776371] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 02:27:30.625823 [ 0.781048] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 02:27:30.625886 [ 0.787316] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 02:27:30.637842 [ 0.792524] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 02:27:30.637903 [ 0.797297] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 02:27:30.649777 [ 0.803403] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 02:27:30.649839 [ 0.808596] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 02:27:30.661751 [ 0.813511] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 02:27:30.661814 [ 0.819575] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 02:27:30.673748 [ 0.825335] pps_core: LinuxPPS API ver. 1 registered Oct 3 02:27:30.673810 [ 0.829776] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 02:27:30.685725 [ 0.838952] PTP clock support registered Oct 3 02:27:30.685784 [ 0.851509] EDAC MC: Ver: 3.0.0 Oct 3 02:27:30.697691 [ 0.863396] vgaarb: loaded Oct 3 02:27:30.709753 [ 0.867056] clocksource: Switched to clocksource arch_sys_counter Oct 3 02:27:30.709817 [ 0.878561] NET: Registered PF_INET protocol family Oct 3 02:27:30.721724 [ 0.882206] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Oct 3 02:27:30.733790 [ 0.890166] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 02:27:30.745705 [ 0.897803] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 02:27:30.745743 [ 0.905590] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Oct 3 02:27:30.757767 [ 0.913439] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Oct 3 02:27:30.769738 [ 0.920724] TCP: Hash tables configured (established 4096 bind 4096) Oct 3 02:27:30.769803 [ 0.927093] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 02:27:30.781759 [ 0.933636] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 02:27:30.781825 [ 0.940788] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 02:27:30.793761 [ 0.947448] RPC: Registered named UNIX socket transport module. Oct 3 02:27:30.793825 [ 0.952371] RPC: Registered udp transport module. Oct 3 02:27:30.805765 [ 0.957168] RPC: Registered tcp transport module. Oct 3 02:27:30.805827 [ 0.961918] RPC: Registered tcp NFSv4.1 backchannel transport module. Oct 3 02:27:30.817736 [ 0.968445] PCI: CLS 0 bytes, default 64 Oct 3 02:27:30.817816 [ 0.973733] Initialise system trusted keyrings Oct 3 02:27:30.817867 [ 0.977176] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Oct 3 02:27:30.829752 [ 0.988617] squashfs: version 4.0 (2009/01/31) Phillip Lougher Oct 3 02:27:30.841715 [ 0.993438] Trying to unpack rootfs image as initramfs... Oct 3 02:27:30.841777 [ 1.017719] NFS: Registering the id_resolver key type Oct 3 02:27:30.865763 [ 1.021428] Key type id_resolver registered Oct 3 02:27:30.865822 [ 1.025656] Key type id_legacy registered Oct 3 02:27:30.877756 [ 1.029867] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Oct 3 02:27:30.877822 [ 1.036513] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Oct 3 02:27:30.889748 [ 1.078486] Key type asymmetric registered Oct 3 02:27:30.925825 [ 1.081219] Asymmetric key parser 'x509' registered Oct 3 02:27:30.925885 [ 1.086282] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 02:27:30.937835 [ 1.093661] io scheduler mq-deadline registered Oct 3 02:27:30.937895 [ 1.098265] io scheduler kyber registered Oct 3 02:27:30.949763 [ 1.139252] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 02:27:30.989801 [ 1.221329] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 02:27:31.073834 [ 1.227577] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 02:27:31.085747 [ 1.259880] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 02:27:31.109844 [ 1.266077] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 02:27:31.121780 [ 1.297842] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 02:27:31.145869 [ 1.304044] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 02:27:31.157743 [ 1.322326] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 02:27:31.169822 [ 1.328578] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 02:27:31.181801 [ 1.361827] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 02:27:31.217756 [ 1.410752] xen:xen_evtchn: Event-channel device installed Oct 3 02:27:31.253801 [ 1.499171] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 02:27:31.349807 [ 1.507899] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 113, base_baud = 0) is a S3C6400/10 Oct 3 02:27:31.361775 [ 1.528527] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 114, base_baud = 0) is a S3C6400/10 Oct 3 02:27:31.385758 [ 1.549497] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 115, base_baud = 0) is a S3C6400/10 Oct 3 02:27:31.397835 [ 1.567961] SuperH (H)SCI(F) driver initialized Oct 3 02:27:31.409750 [ 1.572236] STMicroelectronics ASC driver initialized Oct 3 02:27:31.421817 [ 1.577709] STM32 USART driver initialized Oct 3 02:27:31.421877 [ 1.611284] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 02:27:31.457799 [ 1.635938] brd: module loaded Oct 3 02:27:31.481778 [ 1.651336] loop: module loaded Oct 3 02:27:31.493748 [ 1.671742] Invalid max_queues (4), will use default max: 2. Oct 3 02:27:31.517784 [ 1.700938] tun: Universal TUN/TAP device driver, 1.6 Oct 3 02:27:31.553815 [ 1.704860] CAN device driver interface Oct 3 02:27:31.553875 [ 1.709995] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Oct 3 02:27:31.553925 [ 1.721596] xen_netfront: Initialising Xen virtual ethernet driver Oct 3 02:27:31.565806 [ 1.726508] pegasus: Pegasus/Pegasus II USB Ethernet driver Oct 3 02:27:31.577822 [ 1.732111] usbcore: registered new interface driver pegasus Oct 3 02:27:31.577884 [ 1.737058] Freeing initrd memory: 11780K Oct 3 02:27:31.589846 [ 1.737848] usbcore: registered new interface driver asix Oct 3 02:27:31.589910 [ 1.747378] usbcore: registered new interface driver ax88179_178a Oct 3 02:27:31.601821 [ 1.753517] usbcore: registered new interface driver cdc_ether Oct 3 02:27:31.601885 [ 1.759452] usbcore: registered new interface driver smsc75xx Oct 3 02:27:31.613825 [ 1.765251] usbcore: registered new interface driver smsc95xx Oct 3 02:27:31.613888 [ 1.771070] usbcore: registered new interface driver net1080 Oct 3 02:27:31.625818 [ 1.776784] usbcore: registered new interface driver cdc_subset Oct 3 02:27:31.625881 [ 1.782780] usbcore: registered new interface driver zaurus Oct 3 02:27:31.637790 [ 1.788441] usbcore: registered new interface driver cdc_ncm Oct 3 02:27:31.637854 [ 1.797805] usbcore: registered new interface driver usb-storage Oct 3 02:27:31.649777 [ 1.832053] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 02:27:31.673781 [ 1.840854] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T02:27:33 UTC (1727922453) Oct 3 02:27:31.685821 [ 1.849454] i2c_dev: i2c /dev entries driver Oct 3 02:27:31.697788 [ 1.859706] syscon-poweroff 10040000.system-controller:syscon-poweroff: pm_power_off already claimed for psci_sys_poweroff Oct 3 02:27:31.709846 [ 1.869424] syscon-poweroff: probe of 10040000.system-controller:syscon-poweroff failed with error -16 Oct 3 02:27:31.721833 [ 1.880698] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 02:27:31.733792 [ 1.891512] device-mapper: uevent: version 1.0.3 Oct 3 02:27:31.733853 [ 1.894974] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Oct 3 02:27:31.745832 [ 1.903987] cpu cpu0: OPP table can't be empty Oct 3 02:27:31.745891 [ 1.909014] failed to register cpuidle driver Oct 3 02:27:31.757836 [ 1.912198] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Oct 3 02:27:31.757901 [ 1.920489] sdhci: Secure Digital Host Controller Interface driver Oct 3 02:27:31.769815 [ 1.925564] sdhci: Copyright(c) Pierre Ossman Oct 3 02:27:31.769875 [ 1.933559] sdhci-pltfm: SDHCI platform and OF driver helper Oct 3 02:27:31.781807 [ 1.941255] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 02:27:31.793826 [ 1.946560] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Oct 3 02:27:31.793891 [ 1.953230] usbcore: registered new interface driver usbhid Oct 3 02:27:31.805801 [ 1.958065] usbhid: USB HID core driver Oct 3 02:27:31.805860 [ 1.968909] NET: Registered PF_INET6 protocol family Oct 3 02:27:31.817766 [ 1.973504] Segment Routing with IPv6 Oct 3 02:27:31.817825 [ 1.976264] In-situ OAM (IOAM) with IPv6 Oct 3 02:27:31.829827 [ 1.980329] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Oct 3 02:27:31.829892 [ 1.986681] NET: Registered PF_PACKET protocol family Oct 3 02:27:31.829941 [ 1.991397] can: controller area network core Oct 3 02:27:31.841829 [ 1.995801] NET: Registered PF_CAN protocol family Oct 3 02:27:31.841890 [ 2.000650] can: raw protocol Oct 3 02:27:31.841934 [ 2.003661] can: broadcast manager protocol Oct 3 02:27:31.853824 [ 2.007949] can: netlink gateway - max_hops=1 Oct 3 02:27:31.853884 [ 2.012564] Key type dns_resolver registered Oct 3 02:27:31.865823 [ 2.017359] ThumbEE CPU extension supported. Oct 3 02:27:31.865884 [ 2.021026] Registering SWP/SWPB emulation handler Oct 3 02:27:31.865932 [ 2.026356] Loading compiled-in X.509 certificates Oct 3 02:27:31.877761 [ 2.054716] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 02:27:31.901767 [ 2.060858] clk: Not disabling unused clocks Oct 3 02:27:31.913745 [ 2.067752] Freeing unused kernel image (initmem) memory: 2048K Oct 3 02:27:31.913809 [ 2.073841] Run /init as init process Oct 3 02:27:31.925680 Loading, please wait... Oct 3 02:27:31.949689 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 02:27:32.021688 [ 3.456824] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 02:27:33.305854 [ 3.464059] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 02:27:33.317785 [ 3.489545] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 02:27:33.341817 [ 3.500620] phy phy-12130000.phy.9: phy_power_on was called before phy_init Oct 3 02:27:33.353815 [ 3.506213] exynos-ohci 12120000.usb: USB Host Controller Oct 3 02:27:33.353878 [ 3.511728] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Oct 3 02:27:33.365845 [ 3.522348] Synopsys Designware Multimedia Card Interface Driver Oct 3 02:27:33.365908 [ 3.550902] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 02:27:33.401833 [ 3.556733] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 02:27:33.401898 [ 3.563956] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 Oct 3 02:27:33.413760 [ 3.563974] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 02:27:33.425790 [ 3.577058] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 02:27:33.425858 [ 3.584469] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 02:27:33.437740 [ 3.595333] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 02:27:33.449753 [ 3.600457] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 02:27:33.449816 [ 3.606007] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo Oct 3 02:27:33.461755 [ 3.615929] mmc_host mmc0: card is polling. Oct 3 02:27:33.461815 [ 3.621917] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 02:27:33.473675 [ 3.642969] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 02:27:33.497758 [ 3.648340] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 02:27:33.497822 [ 3.653870] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 127,32 bit host data width,128 deep fifo Oct 3 02:27:33.509765 [ 3.664637] hub 1-0:1.0: USB hub found Oct 3 02:27:33.509822 [ 3.664709] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 02:27:33.521761 [ 3.674299] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Oct 3 02:27:33.521833 [ 3.681784] hub 1-0:1.0: 3 ports detected Oct 3 02:27:33.533760 [ 3.683243] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 02:27:33.545762 [ 3.690913] phy phy-12130000.phy.9: phy_power_on was called before phy_init Oct 3 02:27:33.545828 [ 3.696715] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 02:27:33.557763 [ 3.703581] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 02:27:33.557825 [ 3.808458] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Oct 3 02:27:33.653740 [ 3.822335] scsi host0: ahci-dwc Oct 3 02:27:33.665702 [ 3.830582] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 02:27:33.677769 [ 3.841196] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 02:27:33.689761 [ 3.854999] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 128 Oct 3 02:27:33.701749 [ 3.863704] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 02:27:33.713747 [ 3.864546] mmc0: new DDR MMC card at address 0001 Oct 3 02:27:33.713808 [ 3.904676] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Oct 3 02:27:33.749717 [ 3.937759] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 Oct 3 02:27:33.785750 [ 3.946139] mmcblk0: p1 p2 p3 p4 Oct 3 02:27:33.785808 [ 3.961253] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 02:27:33.809796 [ 3.971997] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 02:27:33.821753 [ 3.973069] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Oct 3 02:27:33.821814 [ 3.983757] mmc1: new high speed SDHC card at address aaaa Oct 3 02:27:33.833768 [ 3.989806] hub 2-0:1.0: USB hub found Oct 3 02:27:33.833827 [ 3.991545] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Oct 3 02:27:33.845745 [ 3.998170] hub 2-0:1.0: 3 ports detected Oct 3 02:27:33.845805 [ 3.999734] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Oct 3 02:27:33.845857 [ 4.023915] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Oct 3 02:27:33.869713 [ 4.044067] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Oct 3 02:27:33.893733 [ 4.053868] s3c-rtc 101e0000.rtc: registered as rtc1 Oct 3 02:27:33.905696 [ 4.357103] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 02:27:34.205746 [ 4.363672] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 02:27:34.217719 [ 4.369028] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 02:27:34.217785 [ 4.397661] ata1.00: configured for UDMA/133 Oct 3 02:27:34.241735 [ 4.401040] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 02:27:34.253727 [ 4.418295] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 02:27:34.265759 [ 4.424411] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 02:27:34.277761 [ 4.431753] sd 0:0:0:0: [sda] Write Protect is off Oct 3 02:27:34.277822 [ 4.437295] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 02:27:34.289768 [ 4.445207] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Oct 3 02:27:34.301764 [ 4.448303] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 02:27:34.301830 [ 4.453619] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 02:27:34.301880 [ 4.464083] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 02:27:34.313774 [ 4.476906] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 02:27:34.325785 [ 4.485470] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Oct 3 02:27:34.337758 [ 4.491234] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 02:27:34.337821 [ 4.492348] sda: sda1 sda2 < sda5 > Oct 3 02:27:34.349744 [ 4.496577] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 02:27:34.349816 [ 4.506763] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 02:27:34.361732 [ 4.507974] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 02:27:34.361797 [ 4.572354] hub 3-0:1.0: USB hub found Oct 3 02:27:34.421787 [ 4.575152] hub 3-0:1.0: 1 port detected Oct 3 02:27:34.421847 [ 4.579828] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 02:27:34.433762 [ 4.587972] hub 4-0:1.0: USB hub found Oct 3 02:27:34.433819 [ 4.590865] hub 4-0:1.0: 1 port detected Oct 3 02:27:34.433865 [ 4.636781] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 02:27:34.493683 [ 4.710153] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 02:27:34.565690 [ 4.818743] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 02:27:34.673709 [ 4.926797] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 02:27:34.781708 [ 5.034923] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 02:27:34.889680 [ 5.143003] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 02:27:34.997693 [ 5.251061] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 02:27:35.105703 [ 5.359119] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 02:27:35.213736 [ 5.467169] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 02:27:35.321693 [ 5.575215] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 02:27:35.429711 [ 5.983935] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 02:27:35.837734 [ 6.091661] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 02:27:35.945714 [ 6.699992] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 02:27:36.545748 [ 7.107072] random: crng init done Oct 3 02:27:36.953718 Begin: Loading essential drivers ... done. Oct 3 02:27:37.529676 Begin: Running /scripts/init-premount ... done. Oct 3 02:27:40.541710 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 02:27:40.553756 Begin: Running /scripts/local-premount ... done. Oct 3 02:27:40.565690 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 02:27:40.649671 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 02:27:40.757729 /dev/mapper/arndale--westfield--vg-root: clean, 46040/1220608 files, 634406/4882432 blocks Oct 3 02:27:40.961756 done. Oct 3 02:27:40.982175 [ 11.133052] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 02:27:40.985691 [ 11.454778] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 02:27:41.309795 done. Oct 3 02:27:41.309846 Begin: Running /scripts/local-bottom ... done. Oct 3 02:27:41.357789 Begin: Running /scripts/init-bottom ... done. Oct 3 02:27:41.393732 INIT: version 3.06 booting Oct 3 02:27:41.849780 INIT: No inittab.d directory found Oct 3 02:27:41.897791 Using makefile-style concurrent boot in runlevel S. Oct 3 02:27:42.197803 Starting hotplug events dispatcher: systemd-udevd. Oct 3 02:27:43.733733 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 02:27:44.181723 Synthesizing the initial hotplug events (devices)...[ 14.755909] wm8994 3-001a: Device is not a WM8994, ID is 0 Oct 3 02:27:44.601781 [ 14.762797] wm8994: probe of 3-001a failed with error -22 Oct 3 02:27:44.613692 [ 15.238672] mc: Linux media interface: v0.10 Oct 3 02:27:45.081731 [ 15.268681] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Oct 3 02:27:45.117742 [ 15.287526] s5p-secss 10830000.sss: s5p-sss driver registered Oct 3 02:27:45.129750 [ 15.315253] videodev: Linux video capture interface: v2.00 Oct 3 02:27:45.165711 done. Oct 3 02:27:45.321679 Waiting for /dev to be fully populated...[ 15.579744] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 02:27:45.429728 [ 15.657422] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 02:27:45.513690 [ 15.677812] s5p-mfc 11000000.codec: Adding to iommu group 0 Oct 3 02:27:45.525741 [ 15.689806] exynos-gsc 13e00000.gsc: Adding to iommu group 1 Oct 3 02:27:45.537738 [ 15.698102] exynos-gsc 13e10000.gsc: Adding to iommu group 2 Oct 3 02:27:45.549731 [ 15.703972] exynos-gsc 13e20000.gsc: Adding to iommu group 3 Oct 3 02:27:45.549794 [ 15.717513] exynos-gsc 13e30000.gsc: Adding to iommu group 4 Oct 3 02:27:45.561727 [ 15.767452] blk_print_req_error: 6 callbacks suppressed Oct 3 02:27:45.609734 [ 15.767462] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 02:27:45.621748 [ 15.789440] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Oct 3 02:27:45.645708 [ 15.849493] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 02:27:45.705869 [ 15.857461] usb3503 usb-hub: switched to HUB mode Oct 3 02:27:45.705965 [ 15.861886] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 02:27:45.706040 [ 15.870368] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 02:27:45.717783 [ 15.877762] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 02:27:45.729796 [ 15.880937] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 02:27:45.741761 [ 15.897857] s5p-mfc 11000000.codec: decoder registered as /dev/video4 Oct 3 02:27:45.741825 [ 15.921189] s5p-mfc 11000000.codec: encoder registered as /dev/video5 Oct 3 02:27:45.765762 [ 16.011808] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 02:27:45.861639 [ 16.120128] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 02:27:45.969643 [ 16.217103] usb 2-3: new high-speed USB device number 2 using exynos-ehci Oct 3 02:27:46.065749 [ 16.232601] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 02:27:46.089656 [ 16.264090] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Oct 3 02:27:46.113650 [ 16.341702] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 02:27:46.197573 [ 16.419773] hub 2-3:1.0: USB hub found Oct 3 02:27:46.269723 [ 16.422900] hub 2-3:1.0: 3 ports detected Oct 3 02:27:46.269782 [ 16.449803] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 02:27:46.305601 [ 16.557929] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 02:27:46.413686 [ 16.642943] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 02:27:46.497644 [ 16.650661] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 02:27:46.497682 [ 16.659321] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 02:27:46.509656 [ 16.671061] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 02:27:46.521645 [ 16.678903] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 02:27:46.533640 [ 16.687619] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 02:27:46.545579 [ 16.777105] usb 2-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 02:27:46.629578 [ 16.939854] hub 2-3.2:1.0: USB hub found Oct 3 02:27:46.785640 [ 16.942923] hub 2-3.2:1.0: 4 ports detected Oct 3 02:27:46.785672 [ 16.971135] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 02:27:46.821752 [ 17.014851] usbcore: registered new device driver onboard-usb-hub Oct 3 02:27:46.857845 [ 17.079004] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 02:27:46.929699 [ 17.137904] hub 2-3.2:1.0: USB hub found Oct 3 02:27:46.989619 [ 17.140830] hub 2-3.2:1.0: 4 ports detected Oct 3 02:27:46.989652 [ 17.152209] hub 2-3.2:1.0: USB hub found Oct 3 02:27:47.001630 [ 17.155225] hub 2-3.2:1.0: 4 ports detected Oct 3 02:27:47.001662 [ 17.477092] usb 2-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 02:27:47.325679 [ 17.631733] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 02:27:47.481787 [ 17.687405] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 02:27:47.541818 [ 18.329230] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 02:27:48.177748 [ 18.344100] Asix Electronics AX88772A usb-002:004:10: attached PHY driver (mii_bus:phy_addr=usb-002:004:10, irq=POLL) Oct 3 02:27:48.201659 [ 18.353881] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 72:ba:47:b1:d5:ca Oct 3 02:27:48.213584 done. Oct 3 02:27:48.465587 [ 18.947852] EXT4-fs (dm-0): re-mounted. Quota mode: disabled. Oct 3 02:27:48.801581 Checking file systems.../dev/sda1: clean, 2105/61056 files, 43334/243968 blocks Oct 3 02:27:50.328812 done. Oct 3 02:27:50.352779 Cleaning up temporary files... /tmp. Oct 3 02:27:50.616789 [ 20.983478] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 02:27:50.836804 [ 21.032303] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 02:27:50.884892 [ 21.127533] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k Oct 3 02:27:50.980828 Mounting local filesystems...done. Oct 3 02:27:51.232841 Activating swapfile swap, if any...done. Oct 3 02:27:51.232841 Cleaning up temporary files.... Oct 3 02:27:51.256816 Starting Setting kernel variables: sysctl. Oct 3 02:27:51.376807 [ 22.857389] xenbr0: port 1(eth0) entered blocking state Oct 3 02:27:52.708833 [ 22.861250] xenbr0: port 1(eth0) entered disabled state Oct 3 02:27:52.708833 [ 22.866690] device eth0 entered promiscuous mode Oct 3 02:27:52.720804 [ 22.876729] asix 2-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 02:27:52.732768 Configuring network interfaces...RTNETLINK answers: Operation not supported Oct 3 02:27:54.604865 Oct 3 02:27:54.604865 Waiting for xenbr0 to get ready (MAXWAIT is 2 seconds). Oct 3 02:27:54.616827 [ 25.065739] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 02:27:54.916885 [ 25.067147] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 3 02:27:54.928890 [ 25.078155] xenbr0: port 1(eth0) entered blocking state Oct 3 02:27:54.928890 [ 25.083328] xenbr0: port 1(eth0) entered forwarding state Oct 3 02:27:54.940834 [ 25.088928] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready Oct 3 02:27:54.940834 done. Oct 3 02:27:55.120813 Cleaning up temporary files.... Oct 3 02:27:55.180832 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Oct 3 02:27:55.240833 Starting nftables: none Oct 3 02:27:55.276833 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Oct 3 02:27:55.384849 failed! Oct 3 02:27:55.384849 startpar: service(s) returned failure: nftables ... failed! Oct 3 02:27:55.396829 INIT: Entering runlevel: 2 Oct 3 02:27:55.408978 Using makefile-style concurrent boot in runlevel 2. Oct 3 02:27:55.432926 Starting Apache httpd web server: apache2AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.149.64.45. Set the 'ServerName' directive globally to suppress this message Oct 3 02:27:56.152866 . Oct 3 02:27:57.220952 Starting NTP server: ntpd2024-10-03T02:27:59 ntpd[1152]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 02:27:57.560888 2024-10-03T02:27:59 ntpd[1152]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 02:27:57.572842 . Oct 3 02:27:57.572842 Starting system message bus: dbus. Oct 3 02:27:58.244842 Starting SMP IRQ Balancer: irqbalance. Oct 3 02:27:58.364830 Starting OpenBSD Secure Shell server: sshd. Oct 3 02:27:58.808836 (XEN) common/grant_table.c:1909:d0v1 Expanding d0 grant table from 1 to 2 frames Oct 3 02:28:00.881719 Starting /usr/local/sbin/xenstored... Oct 3 02:28:00.881768 Setting domain 0 name, domid and JSON config... Oct 3 02:28:00.893687 Done setting up Dom0 Oct 3 02:28:00.893718 Starting xenconsoled... Oct 3 02:28:00.893741 Starting QEMU as disk backend for dom0 Oct 3 02:28:00.893765 [ 31.147253] vif vif-1 enX1: renamed from eth1 Oct 3 02:28:00.989689 Oct 3 02:28:02.025681 Debian GNU/Linux 12 arndale-westfield hvc0 Oct 3 02:28:02.025720 Oct 3 02:28:02.025741 arndale-westfield login: [ 70.458929] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 02:28:40.312795 [ 70.588299] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 02:28:40.444856 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 02:29:44.306017 [ 180.010195] EXT4-fs (dm-2): unmounting filesystem. Oct 3 02:30:29.853822 [ 196.519279] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 02:30:46.369629 [ 196.649976] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 02:30:46.501648 [ 198.998299] loop0: detected capacity change from 0 to 19531250 Oct 3 02:30:48.841838 [ 199.418010] xenbr0: port 2(vif1.0) entered blocking state Oct 3 02:30:49.261603 [ 199.422049] xenbr0: port 2(vif1.0) entered disabled state Oct 3 02:30:49.273617 [ 199.427749] device vif1.0 entered promiscuous mode Oct 3 02:30:49.273617 (XEN) d1v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 02:30:53.321692 (XEN) d1v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 02:30:53.429798 (XEN) d1v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 02:30:53.465816 (XEN) common/grant_table.c:1909:d1v0 Expanding d1 grant table from 1 to 2 frames Oct 3 02:30:56.297745 (XEN) common/grant_table.c:1909:d1v0 Expanding d1 grant table from 2 to 3 frames Oct 3 02:30:56.321670 [ 206.524827] vif vif-1-0 vif1.0: Guest Rx ready Oct 3 02:30:56.369761 [ 206.527985] IPv6: ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready Oct 3 02:30:56.381765 [ 206.534556] xenbr0: port 2(vif1.0) entered blocking state Oct 3 02:30:56.381829 [ 206.539914] xenbr0: port 2(vif1.0) entered forwarding state Oct 3 02:30:56.381879 (XEN) gnttab_mark_dirty not implemented yet Oct 3 02:30:56.417678 [ 271.894349] xen-blkback: backend/vbd/1/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 02:32:01.741842 (XEN) common/grant_table.c:1909:d1v1 Expanding d1 grant table from 3 to 4 frames Oct 3 02:32:26.093814 (XEN) common/grant_table.c:1909:d1v0 Expanding d1 grant table from 4 to 5 frames Oct 3 02:32:28.484818 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 02:36:25.348764 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 02:43:06.817849 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 02:49:47.325799 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 02:56:28.805733 [ 2005.894746] xenbr0: port 2(vif1.0) entered disabled state Oct 3 03:00:55.728832 [ 2030.147577] xenbr0: port 2(vif1.0) entered disabled state Oct 3 03:01:19.976875 [ 2030.151977] device vif1.0 left promiscuous mode Oct 3 03:01:19.988861 [ 2030.156247] xenbr0: port 2(vif1.0) entered disabled state Oct 3 03:01:19.988861 [ 2032.689734] EXT4-fs (dm-2): unmounting filesystem. Oct 3 03:01:22.520856 [ 2045.570614] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 03:01:35.401775 [ 2045.683968] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 03:01:35.509797 [ 2054.532306] loop0: detected capacity change from 0 to 19531250 Oct 3 03:01:44.365801 [ 2054.884915] xenbr0: port 2(vif2.0) entered blocking state Oct 3 03:01:44.713830 [ 2054.889022] xenbr0: port 2(vif2.0) entered disabled state Oct 3 03:01:44.725828 [ 2054.894585] device vif2.0 entered promiscuous mode Oct 3 03:01:44.725913 (XEN) d2v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 03:01:48.925695 (XEN) d2v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:01:49.033739 (XEN) d2v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:01:49.081690 [ 2062.319802] xen-blkback: backend/vbd/2/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:01:52.153883 (XEN) common/grant_table.c:1909:d2v0 Expanding d2 grant table from 1 to 2 frames Oct 3 03:01:52.177794 (XEN) common/grant_table.c:1909:d2v0 Expanding d2 grant table from 2 to 3 frames Oct 3 03:01:52.189801 [ 2062.394628] vif vif-2-0 vif2.0: Guest Rx ready Oct 3 03:01:52.225816 [ 2062.397909] IPv6: ADDRCONF(NETDEV_CHANGE): vif2.0: link becomes ready Oct 3 03:01:52.225873 [ 2062.404358] xenbr0: port 2(vif2.0) entered blocking state Oct 3 03:01:52.237831 [ 2062.409745] xenbr0: port 2(vif2.0) entered forwarding state Oct 3 03:01:52.237893 [ 2101.256858] xenbr0: port 2(vif2.0) entered disabled state Oct 3 03:02:31.093593 [ 2101.468626] xenbr0: port 2(vif2.0) entered disabled state Oct 3 03:02:31.297810 [ 2101.473200] device vif2.0 left promiscuous mode Oct 3 03:02:31.309730 [ 2101.477416] xenbr0: port 2(vif2.0) entered disabled state Oct 3 03:02:31.309794 [ 2127.881046] EXT4-fs (dm-2): unmounting filesystem. Oct 3 03:02:57.709845 [ 2129.169070] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 03:02:58.993826 [ 2129.299059] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 03:02:59.125793 [ 2136.814635] loop0: detected capacity change from 0 to 19531250 Oct 3 03:03:06.648748 [ 2137.138681] xenbr0: port 2(vif3.0) entered blocking state Oct 3 03:03:06.972832 [ 2137.142715] xenbr0: port 2(vif3.0) entered disabled state Oct 3 03:03:06.972832 [ 2137.148406] device vif3.0 entered promiscuous mode Oct 3 03:03:06.984774 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 03:03:09.368861 (XEN) d3v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 03:03:11.185748 (XEN) d3v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:03:11.293796 (XEN) d3v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:03:11.333786 [ 2144.531221] xen-blkback: backend/vbd/3/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:03:14.369597 (XEN) common/grant_table.c:1909:d3v0 Expanding d3 grant table from 1 to 2 frames Oct 3 03:03:14.393770 (XEN) common/grant_table.c:1909:d3v0 Expanding d3 grant table from 2 to 3 frames Oct 3 03:03:14.393916 [ 2144.621058] vif vif-3-0 vif3.0: Guest Rx ready Oct 3 03:03:14.453632 [ 2144.624577] IPv6: ADDRCONF(NETDEV_CHANGE): vif3.0: link becomes ready Oct 3 03:03:14.453632 [ 2144.630889] xenbr0: port 2(vif3.0) entered blocking state Oct 3 03:03:14.465646 [ 2144.636176] xenbr0: port 2(vif3.0) entered forwarding state Oct 3 03:03:14.465646 [ 2177.949370] xenbr0: port 2(vif3.0) entered disabled state Oct 3 03:03:47.781725 [ 2178.119433] xenbr0: port 2(vif3.0) entered disabled state Oct 3 03:03:47.949750 [ 2178.124768] device vif3.0 left promiscuous mode Oct 3 03:03:47.949786 [ 2178.128345] xenbr0: port 2(vif3.0) entered disabled state Oct 3 03:03:47.961684 [ 2204.228122] EXT4-fs (dm-2): unmounting filesystem. Oct 3 03:04:14.049669 [ 2205.472212] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 03:04:15.297685 [ 2205.602789] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 03:04:15.429695 [ 2212.989291] loop0: detected capacity change from 0 to 19531250 Oct 3 03:04:22.824756 [ 2213.322551] xenbr0: port 2(vif4.0) entered blocking state Oct 3 03:04:23.148800 [ 2213.326589] xenbr0: port 2(vif4.0) entered disabled state Oct 3 03:04:23.160847 [ 2213.332255] device vif4.0 entered promiscuous mode Oct 3 03:04:23.160847 (XEN) d4v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 03:04:27.364790 (XEN) d4v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:04:27.472835 (XEN) d4v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:04:27.508816 [ 2220.799386] xen-blkback: backend/vbd/4/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:04:30.633030 (XEN) common/grant_table.c:1909:d4v0 Expanding d4 grant table from 1 to 2 frames Oct 3 03:04:30.657023 (XEN) common/grant_table.c:1909:d4v0 Expanding d4 grant table from 2 to 3 frames Oct 3 03:04:30.669009 [ 2220.869322] vif vif-4-0 vif4.0: Guest Rx ready Oct 3 03:04:30.693026 [ 2220.873095] IPv6: ADDRCONF(NETDEV_CHANGE): vif4.0: link becomes ready Oct 3 03:04:30.705051 [ 2220.880848] xenbr0: port 2(vif4.0) entered blocking state Oct 3 03:04:30.705114 [ 2220.885143] xenbr0: port 2(vif4.0) entered forwarding state Oct 3 03:04:30.717002 [ 2254.819424] xenbr0: port 2(vif4.0) entered disabled state Oct 3 03:05:04.649787 [ 2255.009076] xenbr0: port 2(vif4.0) entered disabled state Oct 3 03:05:04.829771 [ 2255.014166] device vif4.0 left promiscuous mode Oct 3 03:05:04.841812 [ 2255.017755] xenbr0: port 2(vif4.0) entered disabled state Oct 3 03:05:04.841875 [ 2280.720499] EXT4-fs (dm-2): unmounting filesystem. Oct 3 03:05:30.545834 [ 2281.964710] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 03:05:31.793803 [ 2282.095334] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 03:05:31.925759 [ 2289.577259] loop0: detected capacity change from 0 to 19531250 Oct 3 03:05:39.401803 [ 2289.911979] xenbr0: port 2(vif5.0) entered blocking state Oct 3 03:05:39.745002 [ 2289.916009] xenbr0: port 2(vif5.0) entered disabled state Oct 3 03:05:39.745075 [ 2289.921692] device vif5.0 entered promiscuous mode Oct 3 03:05:39.756978 (XEN) d5v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 03:05:43.944824 (XEN) d5v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:05:44.052842 (XEN) d5v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:05:44.100803 (XEN) common/grant_table.c:1909:d5v0 Expanding d5 grant table from 1 to 2 frames Oct 3 03:05:47.140962 (XEN) common/grant_table.c:1909:d5v0 Expanding d5 grant table from 2 to 3 frames Oct 3 03:05:47.152788 [ 2297.383277] vif vif-5-0 vif5.0: Guest Rx ready Oct 3 03:05:47.212883 [ 2297.386513] IPv6: ADDRCONF(NETDEV_CHANGE): vif5.0: link becomes ready Oct 3 03:05:47.212883 [ 2297.393111] xenbr0: port 2(vif5.0) entered blocking state Oct 3 03:05:47.224841 [ 2297.399990] xenbr0: port 2(vif5.0) entered forwarding state Oct 3 03:05:47.224841 [ 2297.427505] xen-blkback: backend/vbd/5/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:05:47.257735 [ 2330.857541] xenbr0: port 2(vif5.0) entered disabled state Oct 3 03:06:20.681765 [ 2331.037638] xenbr0: port 2(vif5.0) entered disabled state Oct 3 03:06:20.861741 [ 2331.042415] device vif5.0 left promiscuous mode Oct 3 03:06:20.873716 [ 2331.046284] xenbr0: port 2(vif5.0) entered disabled state Oct 3 03:06:20.873781 [ 2356.791156] EXT4-fs (dm-2): unmounting filesystem. Oct 3 03:06:46.621685 [ 2358.068457] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 03:06:47.893729 [ 2358.199008] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 03:06:48.025779 [ 2365.688134] loop0: detected capacity change from 0 to 19531250 Oct 3 03:06:55.513783 [ 2366.023115] xenbr0: port 2(vif6.0) entered blocking state Oct 3 03:06:55.849806 [ 2366.027193] xenbr0: port 2(vif6.0) entered disabled state Oct 3 03:06:55.861729 [ 2366.032819] device vif6.0 entered promiscuous mode Oct 3 03:06:55.861792 (XEN) d6v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 03:07:00.061641 (XEN) d6v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:07:00.169732 (XEN) d6v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:07:00.217632 (XEN) common/grant_table.c:1909:d6v0 Expanding d6 grant table from 1 to 2 frames Oct 3 03:07:03.209746 (XEN) common/grant_table.c:1909:d6v0 Expanding d6 grant table from 2 to 3 frames Oct 3 03:07:03.221668 [ 2373.461533] vif vif-6-0 vif6.0: Guest Rx ready Oct 3 03:07:03.293683 [ 2373.464708] IPv6: ADDRCONF(NETDEV_CHANGE): vif6.0: link becomes ready Oct 3 03:07:03.293720 [ 2373.471311] xenbr0: port 2(vif6.0) entered blocking state Oct 3 03:07:03.305671 [ 2373.476705] xenbr0: port 2(vif6.0) entered forwarding state Oct 3 03:07:03.305736 [ 2373.488510] xen-blkback: backend/vbd/6/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:07:03.317695 [ 2407.461033] xenbr0: port 2(vif6.0) entered disabled state Oct 3 03:07:37.285751 [ 2407.697740] xenbr0: port 2(vif6.0) entered disabled state Oct 3 03:07:37.525821 [ 2407.702436] device vif6.0 left promiscuous mode Oct 3 03:07:37.525890 [ 2407.706395] xenbr0: port 2(vif6.0) entered disabled state Oct 3 03:07:37.537634 [ 2433.500912] EXT4-fs (dm-2): unmounting filesystem. Oct 3 03:08:03.325867 [ 2434.772015] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 03:08:04.597857 [ 2434.902697] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 03:08:04.729794 [ 2442.366753] loop0: detected capacity change from 0 to 19531250 Oct 3 03:08:12.192942 [ 2442.696001] xenbr0: port 2(vif7.0) entered blocking state Oct 3 03:08:12.528894 [ 2442.700062] xenbr0: port 2(vif7.0) entered disabled state Oct 3 03:08:12.528894 [ 2442.705678] device vif7.0 entered promiscuous mode Oct 3 03:08:12.528894 (XEN) d7v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 03:08:16.725937 (XEN) d7v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:08:16.842026 (XEN) d7v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:08:16.870043 [ 2450.102840] xen-blkback: backend/vbd/7/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:08:19.937827 (XEN) common/grant_table.c:1909:d7v1 Expanding d7 grant table from 1 to 2 frames Oct 3 03:08:19.949813 (XEN) common/grant_table.c:1909:d7v1 Expanding d7 grant table from 2 to 3 frames Oct 3 03:08:19.961721 [ 2450.193806] vif vif-7-0 vif7.0: Guest Rx ready Oct 3 03:08:20.021893 [ 2450.197400] IPv6: ADDRCONF(NETDEV_CHANGE): vif7.0: link becomes ready Oct 3 03:08:20.021991 [ 2450.203556] xenbr0: port 2(vif7.0) entered blocking state Oct 3 03:08:20.033904 [ 2450.214206] xenbr0: port 2(vif7.0) entered forwarding state Oct 3 03:08:20.045903 [ 2483.908436] xenbr0: port 2(vif7.0) entered disabled state Oct 3 03:08:53.737044 [ 2484.117773] xenbr0: port 2(vif7.0) entered disabled state Oct 3 03:08:53.941044 [ 2484.122397] device vif7.0 left promiscuous mode Oct 3 03:08:53.953021 [ 2484.126421] xenbr0: port 2(vif7.0) entered disabled state Oct 3 03:08:53.953079 [ 2509.856622] EXT4-fs (dm-2): unmounting filesystem. Oct 3 03:09:19.685673 [ 2511.109024] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 03:09:20.937639 [ 2511.239683] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 03:09:21.069641 [ 2518.661236] loop0: detected capacity change from 0 to 19531250 Oct 3 03:09:28.485708 [ 2518.992282] xenbr0: port 2(vif8.0) entered blocking state Oct 3 03:09:28.821699 [ 2518.996320] xenbr0: port 2(vif8.0) entered disabled state Oct 3 03:09:28.821699 [ 2519.001975] device vif8.0 entered promiscuous mode Oct 3 03:09:28.833661 (XEN) d8v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 03:09:33.029569 (XEN) d8v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:09:33.141693 (XEN) d8v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:09:33.177721 (XEN) common/grant_table.c:1909:d8v0 Expanding d8 grant table from 1 to 2 frames Oct 3 03:09:36.237624 (XEN) common/grant_table.c:1909:d8v0 Expanding d8 grant table from 2 to 3 frames Oct 3 03:09:36.249613 [ 2526.481788] vif vif-8-0 vif8.0: Guest Rx ready Oct 3 03:09:36.309693 [ 2526.485025] IPv6: ADDRCONF(NETDEV_CHANGE): vif8.0: link becomes ready Oct 3 03:09:36.309803 [ 2526.493113] xenbr0: port 2(vif8.0) entered blocking state Oct 3 03:09:36.321749 [ 2526.499042] xenbr0: port 2(vif8.0) entered forwarding state Oct 3 03:09:36.333708 [ 2526.505958] xen-blkback: backend/vbd/8/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:09:36.333825 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 03:09:50.773599 [ 2559.923923] xenbr0: port 2(vif8.0) entered disabled state Oct 3 03:10:09.745477 [ 2560.107765] xenbr0: port 2(vif8.0) entered disabled state Oct 3 03:10:09.937518 [ 2560.112743] device vif8.0 left promiscuous mode Oct 3 03:10:09.937753 [ 2560.116425] xenbr0: port 2(vif8.0) entered disabled state Oct 3 03:10:09.949446 [ 2586.001018] EXT4-fs (dm-2): unmounting filesystem. Oct 3 03:10:35.821770 [ 2587.268235] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 03:10:37.093765 [ 2587.398847] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 03:10:37.225786 [ 2594.878164] loop0: detected capacity change from 0 to 19531250 Oct 3 03:10:44.701856 [ 2595.207400] xenbr0: port 2(vif9.0) entered blocking state Oct 3 03:10:45.037820 [ 2595.211434] xenbr0: port 2(vif9.0) entered disabled state Oct 3 03:10:45.037889 [ 2595.217201] device vif9.0 entered promiscuous mode Oct 3 03:10:45.049748 (XEN) d9v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 03:10:49.237795 (XEN) d9v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:10:49.345785 (XEN) d9v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:10:49.393761 (XEN) common/grant_table.c:1909:d9v1 Expanding d9 grant table from 1 to 2 frames Oct 3 03:10:52.456936 (XEN) common/grant_table.c:1909:d9v1 Expanding d9 grant table from 2 to 3 frames Oct 3 03:10:52.456936 [ 2602.701653] vif vif-9-0 vif9.0: Guest Rx ready Oct 3 03:10:52.528848 [ 2602.704824] IPv6: ADDRCONF(NETDEV_CHANGE): vif9.0: link becomes ready Oct 3 03:10:52.528848 [ 2602.715422] xenbr0: port 2(vif9.0) entered blocking state Oct 3 03:10:52.540848 [ 2602.719488] xenbr0: port 2(vif9.0) entered forwarding state Oct 3 03:10:52.552781 [ 2602.745056] xen-blkback: backend/vbd/9/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:10:52.576971 [ 2636.638386] xenbr0: port 2(vif9.0) entered disabled state Oct 3 03:11:26.465746 [ 2636.867635] xenbr0: port 2(vif9.0) entered disabled state Oct 3 03:11:26.693793 [ 2636.872247] device vif9.0 left promiscuous mode Oct 3 03:11:26.693855 [ 2636.876284] xenbr0: port 2(vif9.0) entered disabled state Oct 3 03:11:26.705697 [ 2662.527814] EXT4-fs (dm-2): unmounting filesystem. Oct 3 03:11:52.353820 [ 2663.771811] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 03:11:53.601898 [ 2663.902542] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 03:11:53.733882 [ 2671.364362] loop0: detected capacity change from 0 to 19531250 Oct 3 03:12:01.184762 [ 2671.698861] xenbr0: port 2(vif10.0) entered blocking state Oct 3 03:12:01.520893 [ 2671.702978] xenbr0: port 2(vif10.0) entered disabled state Oct 3 03:12:01.532850 [ 2671.708768] device vif10.0 entered promiscuous mode Oct 3 03:12:01.532850 (XEN) d10v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 03:12:05.733727 (XEN) d10v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:12:05.841745 (XEN) d10v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:12:05.877770 (XEN) common/grant_table.c:1909:d10v0 Expanding d10 grant table from 1 to 2 frames Oct 3 03:12:08.925860 (XEN) common/grant_table.c:1909:d10v0 Expanding d10 grant table from 2 to 3 frames Oct 3 03:12:08.937737 [ 2679.169151] vif vif-10-0 vif10.0: Guest Rx ready Oct 3 03:12:08.997776 [ 2679.172477] IPv6: ADDRCONF(NETDEV_CHANGE): vif10.0: link becomes ready Oct 3 03:12:08.997844 [ 2679.179178] xenbr0: port 2(vif10.0) entered blocking state Oct 3 03:12:09.009773 [ 2679.185206] xenbr0: port 2(vif10.0) entered forwarding state Oct 3 03:12:09.009838 [ 2679.192649] xen-blkback: backend/vbd/10/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:12:09.021730 [ 2712.853138] xenbr0: port 2(vif10.0) entered disabled state Oct 3 03:12:42.673735 [ 2713.058912] xenbr0: port 2(vif10.0) entered disabled state Oct 3 03:12:42.889735 [ 2713.063627] device vif10.0 left promiscuous mode Oct 3 03:12:42.889797 [ 2713.067821] xenbr0: port 2(vif10.0) entered disabled state Oct 3 03:12:42.889848 [ 2738.734717] EXT4-fs (dm-2): unmounting filesystem. Oct 3 03:13:08.553777 [ 2739.997752] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 03:13:09.825754 [ 2740.128416] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 03:13:09.957706 [ 2747.615889] loop0: detected capacity change from 0 to 19531250 Oct 3 03:13:17.437763 [ 2747.940718] xenbr0: port 2(vif11.0) entered blocking state Oct 3 03:13:17.761786 [ 2747.944843] xenbr0: port 2(vif11.0) entered disabled state Oct 3 03:13:17.773798 [ 2747.950615] device vif11.0 entered promiscuous mode Oct 3 03:13:17.773798 (XEN) d11v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 03:13:21.972839 (XEN) d11v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:13:22.080818 (XEN) d11v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:13:22.116844 (XEN) common/grant_table.c:1909:d11v0 Expanding d11 grant table from 1 to 2 frames Oct 3 03:13:25.152690 (XEN) common/grant_table.c:1909:d11v0 Expanding d11 grant table from 2 to 3 frames Oct 3 03:13:25.164668 [ 2755.385937] vif vif-11-0 vif11.0: Guest Rx ready Oct 3 03:13:25.212731 [ 2755.389420] IPv6: ADDRCONF(NETDEV_CHANGE): vif11.0: link becomes ready Oct 3 03:13:25.212731 [ 2755.396126] xenbr0: port 2(vif11.0) entered blocking state Oct 3 03:13:25.224728 [ 2755.401539] xenbr0: port 2(vif11.0) entered forwarding state Oct 3 03:13:25.224728 [ 2755.409832] xen-blkback: backend/vbd/11/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:13:25.236771 [ 2788.978879] xenbr0: port 2(vif11.0) entered disabled state Oct 3 03:13:58.797744 [ 2789.147857] xenbr0: port 2(vif11.0) entered disabled state Oct 3 03:13:58.965692 [ 2789.152374] device vif11.0 left promiscuous mode Oct 3 03:13:58.977686 [ 2789.156678] xenbr0: port 2(vif11.0) entered disabled state Oct 3 03:13:58.977728 [ 2814.913198] EXT4-fs (dm-2): unmounting filesystem. Oct 3 03:14:24.736840 [ 2816.179481] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 03:14:26.000852 [ 2816.309900] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 03:14:26.132858 [ 2823.819396] loop0: detected capacity change from 0 to 19531250 Oct 3 03:14:33.645860 [ 2824.149447] xenbr0: port 2(vif12.0) entered blocking state Oct 3 03:14:33.969851 [ 2824.153567] xenbr0: port 2(vif12.0) entered disabled state Oct 3 03:14:33.981784 [ 2824.159348] device vif12.0 entered promiscuous mode Oct 3 03:14:33.981848 (XEN) d12v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 03:14:38.169848 (XEN) d12v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:14:38.289605 (XEN) d12v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:14:38.325686 [ 2831.574123] xen-blkback: backend/vbd/12/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:14:41.397653 (XEN) common/grant_table.c:1909:d12v1 Expanding d12 grant table from 1 to 2 frames Oct 3 03:14:41.421647 (XEN) common/grant_table.c:1909:d12v0 Expanding d12 grant table from 2 to 3 frames Oct 3 03:14:41.433613 [ 2831.645606] vif vif-12-0 vif12.0: Guest Rx ready Oct 3 03:14:41.469692 [ 2831.648996] IPv6: ADDRCONF(NETDEV_CHANGE): vif12.0: link becomes ready Oct 3 03:14:41.481716 [ 2831.656967] xenbr0: port 2(vif12.0) entered blocking state Oct 3 03:14:41.481716 [ 2831.662400] xenbr0: port 2(vif12.0) entered forwarding state Oct 3 03:14:41.493591 [ 2864.993759] xenbr0: port 2(vif12.0) entered disabled state Oct 3 03:15:14.813831 [ 2865.177677] xenbr0: port 2(vif12.0) entered disabled state Oct 3 03:15:14.993761 [ 2865.182437] device vif12.0 left promiscuous mode Oct 3 03:15:15.005776 [ 2865.186526] xenbr0: port 2(vif12.0) entered disabled state Oct 3 03:15:15.005836 [ 2891.421429] EXT4-fs (dm-2): unmounting filesystem. Oct 3 03:15:41.248883 [ 2892.705030] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 03:15:42.532877 [ 2892.880234] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 03:15:42.700926 [ 2900.280696] loop0: detected capacity change from 0 to 19531250 Oct 3 03:15:50.101068 [ 2900.606232] xenbr0: port 2(vif13.0) entered blocking state Oct 3 03:15:50.433691 [ 2900.610400] xenbr0: port 2(vif13.0) entered disabled state Oct 3 03:15:50.433742 [ 2900.616087] device vif13.0 entered promiscuous mode Oct 3 03:15:50.445619 (XEN) d13v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 03:15:54.636856 (XEN) d13v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:15:54.744875 (XEN) d13v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:15:54.792825 [ 2908.051642] xen-blkback: backend/vbd/13/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:15:57.872870 (XEN) common/grant_table.c:1909:d13v0 Expanding d13 grant table from 1 to 2 frames Oct 3 03:15:57.908848 (XEN) common/grant_table.c:1909:d13v0 Expanding d13 grant table from 2 to 3 frames Oct 3 03:15:57.920791 [ 2908.129225] vif vif-13-0 vif13.0: Guest Rx ready Oct 3 03:15:57.956885 [ 2908.132536] IPv6: ADDRCONF(NETDEV_CHANGE): vif13.0: link becomes ready Oct 3 03:15:57.956885 [ 2908.139279] xenbr0: port 2(vif13.0) entered blocking state Oct 3 03:15:57.968854 [ 2908.144651] xenbr0: port 2(vif13.0) entered forwarding state Oct 3 03:15:57.968854 [ 2939.511550] xenbr0: port 2(vif13.0) entered disabled state Oct 3 03:16:29.333040 [ 2939.661649] xenbr0: port 2(vif13.0) entered disabled state Oct 3 03:16:29.488873 [ 2939.668824] device vif13.0 left promiscuous mode Oct 3 03:16:29.488873 [ 2939.672093] xenbr0: port 2(vif13.0) entered disabled state Oct 3 03:16:29.500813 [ 2940.885072] EXT4-fs (dm-2): unmounting filesystem. Oct 3 03:16:30.704838 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 03:16:31.900766 Oct 3 03:16:49.677041 (XEN) *** Serial input to Xen (type 'CTRL-x' three times to switch input) Oct 3 03:16:49.693737 Oct 3 03:16:49.694540 Oct 3 03:16:50.670129 (XEN) '0' pressed -> dumping Dom0's registers Oct 3 03:16:50.689773 (XEN) *** Dumping Dom0 vcpu#0 state: *** Oct 3 03:16:50.689773 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Oct 3 03:16:50.691507 Not tainted ]---- Oct 3 03:16:50.701620 (XEN) CPU: 0 Oct 3 03:16:50.701647 (XEN) PC: c031ce28 Oct 3 03:16:50.701671 (XEN) CPSR: 600d0093 MODE:32-bit Guest SVC Oct 3 03:16:50.701696 (XEN) R0: 00000005 R1: 00000000 R2: 009d48b9 R3: c031ce20 Oct 3 03:16:50.713696 (XEN) R4: c1909d80 R5: c1b12200 R6: c1904d1c R7: c1904d78 Oct 3 03:16:50.713731 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c00 Oct 3 03:16:50.725721 (XEN) USR: SP: bedcd948 LR: b6c17893 Oct 3 03:16:50.725754 (XEN) SVC: SP: c1901f40 LR: c0308df0 SPSR:600d0013 Oct 3 03:16:50.725780 (XEN) ABT: SP: c1b22b10 LR: c0300ea0 SPSR:60010193 Oct 3 03:16:50.737672 (XEN) UND: SP: c1b22b20 LR: c0300fa0 SPSR:600d0093 Oct 3 03:16:50.737706 (XEN) IRQ: SP: c1b22b00 LR: c0300ba0 SPSR:600d0193 Oct 3 03:16:50.749711 (XEN) FIQ: SP: c1b22b30 LR: c1b22b30 SPSR:00000000 Oct 3 03:16:50.749711 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 03:16:50.749726 (XEN) Oct 3 03:16:50.761685 (XEN) SCTLR: 10c5387d Oct 3 03:16:50.761699 (XEN) TCR: 00000000 Oct 3 03:16:50.761723 (XEN) TTBR0: 0000000064fb406a Oct 3 03:16:50.761747 (XEN) TTBR1: 000000006020406a Oct 3 03:16:50.761772 (XEN) IFAR: b6f0bcfc, IFSR: 00000007 Oct 3 03:16:50.773697 (XEN) DFAR: b6a3602c, DFSR: 0000081f Oct 3 03:16:50.773703 (XEN) Oct 3 03:16:50.773725 (XEN) VTCR_EL2: 80003558 Oct 3 03:16:50.773749 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 03:16:50.785631 (XEN) Oct 3 03:16:50.785656 (XEN) SCTLR_EL2: 30cd187f Oct 3 03:16:50.785681 (XEN) HCR_EL2: 007c663f Oct 3 03:16:50.785705 (XEN) TTBR0_EL2: 000000004110e000 Oct 3 03:16:50.785729 (XEN) Oct 3 03:16:50.785751 (XEN) ESR_EL2: 07e00000 Oct 3 03:16:50.797691 (XEN) HPFAR_EL2: 00104810 Oct 3 03:16:50.797710 (XEN) HDFAR: e0807f00 Oct 3 03:16:50.797734 (XEN) HIFAR: c141f698 Oct 3 03:16:50.797757 (XEN) Oct 3 03:16:50.797778 (XEN) Guest stack trace from sp=c1901f40: Oct 3 03:16:50.809697 (XEN) Failed to convert stack to physical address Oct 3 03:16:50.809710 (XEN) *** Dumping Dom0 vcpu#1 state: *** Oct 3 03:16:50.809735 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 03:16:50.821698 (XEN) CPU: 0 Oct 3 03:16:50.821701 (XEN) PC: c031ce28 Oct 3 03:16:50.821725 (XEN) CPSR: 600f0093 MODE:32-bit Guest SVC Oct 3 03:16:50.821749 (XEN) R0: 00000005 R1: 00000000 R2: 005fc5b9 R3: c031ce20 Oct 3 03:16:50.833700 (XEN) R4: c210e600 R5: c1b12200 R6: c1904d1c R7: c1904d78 Oct 3 03:16:50.833707 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c00 Oct 3 03:16:50.845692 (XEN) USR: SP: bed0c970 LR: b6ea46c5 Oct 3 03:16:50.845703 (XEN) SVC: SP: e08c9f90 LR: c0308df0 SPSR:600f0013 Oct 3 03:16:50.845728 (XEN) ABT: SP: c1b22b50 LR: c0300ea0 SPSR:600f0193 Oct 3 03:16:50.857701 (XEN) UND: SP: c1b22b60 LR: c0300fa0 SPSR:600f0093 Oct 3 03:16:50.857705 (XEN) IRQ: SP: c1b22b40 LR: c0300ba0 SPSR:600f0193 Oct 3 03:16:50.869694 (XEN) FIQ: SP: c1b22b70 LR: c1b22b70 SPSR:00000000 Oct 3 03:16:50.869697 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 03:16:50.881699 (XEN) Oct 3 03:16:50.881699 (XEN) SCTLR: 10c5387d Oct 3 03:16:50.881719 (XEN) TCR: 00000000 Oct 3 03:16:50.881742 (XEN) TTBR0: 0000000066a1406a Oct 3 03:16:50.881766 (XEN) TTBR1: 000000006020406a Oct 3 03:16:50.893704 (XEN) IFAR: b6e02814, IFSR: 00000007 Oct 3 03:16:50.893705 (XEN) DFAR: 00580318, DFSR: 0000081f Oct 3 03:16:50.893730 (XEN) Oct 3 03:16:50.893751 (XEN) VTCR_EL2: 80003558 Oct 3 03:16:50.893774 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 03:16:50.905699 (XEN) Oct 3 03:16:50.905699 (XEN) SCTLR_EL2: 30cd187f Oct 3 03:16:50.905720 (XEN) HCR_EL2: 007c663f Oct 3 03:16:50.905743 (XEN) TTBR0_EL2: 000000004110e000 Oct 3 03:16:50.905766 (XEN) Oct 3 03:16:50.905787 (XEN) ESR_EL2: 07e00000 Oct 3 03:16:50.917676 (XEN) HPFAR_EL2: 00104810 Oct 3 03:16:50.917680 (XEN) HDFAR: e0807f00 Oct 3 03:16:50.917703 (XEN) HIFAR: c141f698 Oct 3 03:16:50.917726 (XEN) Oct 3 03:16:50.917747 (XEN) Guest stack trace from sp=e08c9f90: Oct 3 03:16:50.929660 (XEN) Failed to convert stack to physical address Oct 3 03:16:50.929666 Oct 3 03:16:52.675023 (XEN) 'H' pressed -> dumping heap info (now = 2968170209958) Oct 3 03:16:52.696951 (XEN) heap[node=0][zone=0] -> 16267 pages Oct 3 03:16:52.696951 (XEN) heap[node=0][zone=1] -> 0 pages Oct 3 03:16:52.696951 (XEN) heap[node=0][zone=2 Oct 3 03:16:52.698525 ] -> 0 pages Oct 3 03:16:52.708545 (XEN) heap[node=0][zone=3] -> 0 pages Oct 3 03:16:52.708545 (XEN) heap[node=0][zone=4] -> 0 pages Oct 3 03:16:52.708545 (XEN) heap[node=0][zone=5] -> 0 pages Oct 3 03:16:52.708545 (XEN) heap[node=0][zone=6] -> 0 pages Oct 3 03:16:52.720801 (XEN) heap[node=0][zone=7] -> 0 pages Oct 3 03:16:52.720801 (XEN) heap[node=0][zone=8] -> 0 pages Oct 3 03:16:52.720801 (XEN) heap[node=0][zone=9] -> 0 pages Oct 3 03:16:52.732802 (XEN) heap[node=0][zone=10] -> 0 pages Oct 3 03:16:52.732802 (XEN) heap[node=0][zone=11] -> 0 pages Oct 3 03:16:52.732802 (XEN) heap[node=0][zone=12] -> 0 pages Oct 3 03:16:52.732802 (XEN) heap[node=0][zone=13] -> 0 pages Oct 3 03:16:52.743136 (XEN) heap[node=0][zone=14] -> 0 pages Oct 3 03:16:52.743174 (XEN) heap[node=0][zone=15] -> 0 pages Oct 3 03:16:52.743199 (XEN) heap[node=0][zone=16] -> 0 pages Oct 3 03:16:52.756795 (XEN) heap[node=0][zone=17] -> 0 pages Oct 3 03:16:52.756795 (XEN) heap[node=0][zone=18] -> 0 pages Oct 3 03:16:52.756795 (XEN) heap[node=0][zone=19] -> 130835 pages Oct 3 03:16:52.756795 (XEN) heap[node=0][zone=20] -> 241597 pages Oct 3 03:16:52.768802 (XEN) heap[node=0][zone=21] -> 0 pages Oct 3 03:16:52.768802 (XEN) heap[node=0][zone=22] -> 0 pages Oct 3 03:16:52.768802 (XEN) heap[node=0][zone=23] -> 0 pages Oct 3 03:16:52.780871 (XEN) heap[node=0][zone=24] -> 0 pages Oct 3 03:16:52.780908 (XEN) heap[node=0][zone=25] -> 0 pages Oct 3 03:16:52.780933 (XEN) heap[node=0][zone=26] -> 0 pages Oct 3 03:16:52.792776 (XEN) heap[node=0][zone=27] -> 0 pages Oct 3 03:16:52.792996 (XEN) heap[node=0][zone=28] -> 0 pages Oct 3 03:16:52.793140 Oct 3 03:16:54.658292 Oct 3 03:16:56.467863 Oct 3 03:16:56.697270 Oct 3 03:16:58.474160 Oct 3 03:16:58.694801 (XEN) Dumping timer queues: Oct 3 03:16:58.716927 (XEN) CPU00: Oct 3 03:16:58.716927 (XEN) ex= 52934us timer=43fdc968 cb=vtimer.c#virt_timer_expired(43fdc960) Oct 3 03:16:58.716927 (XEN) CPU0 Oct 3 03:16:58.718248 1: Oct 3 03:16:58.728692 (XEN) ex= 94125us timer=43fee968 cb=vtimer.c#virt_timer_expired(43fee960) Oct 3 03:16:58.728692 Oct 3 03:17:00.734290 Oct 3 03:17:02.482519 Oct 3 03:17:02.723622 (XEN) 'd' pressed -> dumping registers Oct 3 03:17:02.753040 (XEN) Oct 3 03:17:02.753040 (XEN) *** Dumping CPU0 host state: *** Oct 3 03:17:02.753040 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 03:17:02.753040 (XEN) CPU: 0 Oct 3 03:17:02.753040 (XEN) PC: Oct 3 03:17:02.754702 0025f53c domain.c#idle_loop+0x130/0x1ac Oct 3 03:17:02.764940 (XEN) CPSR: 600f005a MODE:Hypervisor Oct 3 03:17:02.764981 (XEN) R0: 00000000 R1: 00000001 R2: 00000000 R3: 00000000 Oct 3 03:17:02.776981 (XEN) R4: 00000000 R5: 003000e0 R6: 00331324 R7: 00000001 Oct 3 03:17:02.777016 (XEN) R8: 00331104 R9: 00000000 R10:40e00000 R11:4003ff54 R12:fffffffc Oct 3 03:17:02.788204 (XEN) HYP: SP: 4003ff44 LR: 00225b7c Oct 3 03:17:02.788237 (XEN) Oct 3 03:17:02.788259 (XEN) VTCR_EL2: 80003558 Oct 3 03:17:02.788283 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 03:17:02.788307 (XEN) Oct 3 03:17:02.788328 (XEN) SCTLR_EL2: 30cd187f Oct 3 03:17:02.804961 (XEN) HCR_EL2: 007c663f Oct 3 03:17:02.804993 (XEN) TTBR0_EL2: 000000004110e000 Oct 3 03:17:02.805018 (XEN) Oct 3 03:17:02.805039 (XEN) ESR_EL2: 07e00000 Oct 3 03:17:02.805063 (XEN) HPFAR_EL2: 00104810 Oct 3 03:17:02.805086 (XEN) HDFAR: e0807f00 Oct 3 03:17:02.805108 (XEN) HIFAR: c141f698 Oct 3 03:17:02.816930 (XEN) Oct 3 03:17:02.816959 (XEN) Xen stack trace from sp=4003ff44: Oct 3 03:17:02.816985 (XEN) 07e00000 00295014 002919bc 4003ff4c 002678fc 00000000 00000000 00000000 Oct 3 03:17:02.828825 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 03:17:02.828825 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 03:17:02.840855 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 03:17:02.840855 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 03:17:02.852874 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 03:17:02.852874 (XEN) Xen call trace: Oct 3 03:17:02.864842 (XEN) [<0025f53c>] domain.c#idle_loop+0x130/0x1ac (PC) Oct 3 03:17:02.865022 (XEN) [<00225b7c>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 03:17:02.865055 (XEN) [<002678fc>] arch_get_xen_caps+0/0x90 Oct 3 03:17:02.876735 (XEN) Oct 3 03:17:02.876735 (XEN) *** Dumping CPU1 host state: *** Oct 3 03:17:02.876735 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 03:17:02.888853 (XEN) CPU: 1 Oct 3 03:17:02.888853 (XEN) PC: 0025f53c domain.c#idle_loop+0x130/0x1ac Oct 3 03:17:02.888853 (XEN) CPSR: 600d005a MODE:Hypervisor Oct 3 03:17:02.888853 (XEN) R0: 00000000 R1: 00000001 R2: 3fd06000 R3: 00000000 Oct 3 03:17:02.900846 (XEN) R4: 00000001 R5: 003000e0 R6: 00331324 R7: 00000002 Oct 3 03:17:02.900846 (XEN) R8: 00331104 R9: 00000001 R10:40e00000 R11:4000ff54 R12:fffffffc Oct 3 03:17:02.912843 (XEN) HYP: SP: 4000ff44 LR: 00225b7c Oct 3 03:17:02.912843 (XEN) Oct 3 03:17:02.912843 (XEN) VTCR_EL2: 80003558 Oct 3 03:17:02.912843 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 03:17:02.924848 (XEN) Oct 3 03:17:02.924848 (XEN) SCTLR_EL2: 30cd187f Oct 3 03:17:02.924848 (XEN) HCR_EL2: 007c663f Oct 3 03:17:02.924848 (XEN) TTBR0_EL2: 00000000ba004000 Oct 3 03:17:02.924848 (XEN) Oct 3 03:17:02.924848 (XEN) ESR_EL2: 07e00000 Oct 3 03:17:02.936852 (XEN) HPFAR_EL2: 00104810 Oct 3 03:17:02.936852 (XEN) HDFAR: e0807f00 Oct 3 03:17:02.936852 (XEN) HIFAR: c0c0a630 Oct 3 03:17:02.936852 (XEN) Oct 3 03:17:02.936852 (XEN) Xen stack trace from sp=4000ff44: Oct 3 03:17:02.948829 (XEN) 07e00000 00301290 00000001 4000ff3c 002681e0 00000000 00000000 00000000 Oct 3 03:17:02.948829 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 03:17:02.960845 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 03:17:02.960845 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 03:17:02.972839 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 03:17:02.984919 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 03:17:02.984919 (XEN) Xen call trace: Oct 3 03:17:02.984919 (XEN) [<0025f53c>] domain.c#idle_loop+0x130/0x1ac (PC) Oct 3 03:17:02.996863 (XEN) [<00225b7c>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 03:17:02.996863 (XEN) [<002681e0>] start_secondary+0x204/0x20c Oct 3 03:17:02.996863 (XEN) Oct 3 03:17:03.008782 Oct 3 03:17:04.715613 (XEN) 'e' pressed -> dumping event-channel info Oct 3 03:17:04.740994 (XEN) Event channel information for domain 0: Oct 3 03:17:04.740994 (XEN) Polling vCPUs: {} Oct 3 03:17:04.740994 (XEN) port Oct 3 03:17:04.743077 [p/m/s] Oct 3 03:17:04.751904 (XEN) 1 [0/0/ - ]: s=3 n=1 x=0 d=0 p=4 Oct 3 03:17:04.751912 (XEN) 2 [0/0/ - ]: s=5 n=0 x=0 v=2 Oct 3 03:17:04.751912 (XEN) 3 [0/0/ - ]: s=5 n=1 x=0 v=3 Oct 3 03:17:04.764837 (XEN) 4 [0/0/ - ]: s=3 n=0 x=0 d=0 p=1 Oct 3 03:17:04.764837 (XEN) 5 [0/0/ - ]: s=3 n=1 x=0 d=0 p=6 Oct 3 03:17:04.764837 (XEN) 6 [0/0/ - ]: s=3 n=0 x=0 d=0 p=5 Oct 3 03:17:04.776773 Oct 3 03:17:06.734121 (XEN) gnttab_usage_print_all [ key 'g' pressed Oct 3 03:17:06.752996 (XEN) -------- active -------- -------- shared -------- Oct 3 03:17:06.752996 (XEN) [ref] localdo Oct 3 03:17:06.755358 m mfn pin localdom gmfn flags Oct 3 03:17:06.764791 (XEN) grant-table for remote d0 (v1) Oct 3 03:17:06.764791 (XEN) 2 frames (64 max), 9 maptrack frames (1024 max) Oct 3 03:17:06.776513 (XEN) [0x208] 0 0x64b42 0x00000001 0 0x064b42 0x19 Oct 3 03:17:06.776513 (XEN) [0x209] 0 0x64b41 0x00000001 0 0x064b41 0x19 Oct 3 03:17:06.788806 (XEN) gnttab_usage_print_all ] done Oct 3 03:17:06.788806 Oct 3 03:17:08.729402 Oct 3 03:17:10.496732 Oct 3 03:17:10.741004 (XEN) Physical memory information: Oct 3 03:17:10.761706 (XEN) Xen heap: 65068kB free Oct 3 03:17:10.761785 (XEN) heap[19]: Oct 3 03:17:10.763499 523340kB free Oct 3 03:17:10.777809 (XEN) heap[20]: 966388kB free Oct 3 03:17:10.777867 (XEN) Dom heap: 1489728kB free Oct 3 03:17:10.777913 Oct 3 03:17:12.743805 Oct 3 03:17:14.503218 Oct 3 03:17:14.706498 (XEN) sched_smt_power_savings: disabled Oct 3 03:17:14.729781 (XEN) NOW=2990209328166 Oct 3 03:17:14.729837 (XEN) Online Cpus: 0-1 Oct 3 03:17:14.729880 (XEN) Cpupool 0: Oct 3 03:17:14.729920 (XEN) Cpus: 0-1 Oct 3 03:17:14.729959 (XEN) Sched Oct 3 03:17:14.732192 uling granularity: cpu, 1 CPU per sched-resource Oct 3 03:17:14.741649 (XEN) Scheduler: SMP Credit Scheduler rev2 (credit2) Oct 3 03:17:14.741681 (XEN) Active queues: 1 Oct 3 03:17:14.741704 (XEN) default-weight = 256 Oct 3 03:17:14.753800 (XEN) Runqueue 0: Oct 3 03:17:14.753855 (XEN) ncpus = 2 Oct 3 03:17:14.753898 (XEN) cpus = 0-1 Oct 3 03:17:14.753941 (XEN) max_weight = 256 Oct 3 03:17:14.765756 (XEN) pick_bias = 0 Oct 3 03:17:14.765815 (XEN) instload = 0 Oct 3 03:17:14.765859 (XEN) aveload = 1482 (~0%) Oct 3 03:17:14.765902 (XEN) idlers: 2 Oct 3 03:17:14.765942 (XEN) tickled: 0 Oct 3 03:17:14.777722 (XEN) fully idle cores: 2 Oct 3 03:17:14.777780 (XEN) Domain info: Oct 3 03:17:14.777823 (XEN) Domain: 0 w 256 c 0 v 2 Oct 3 03:17:14.777866 (XEN) 1: [0.0] flags=0 cpu=1 credit=5601795 [w=256] load=1082 (~0%) Oct 3 03:17:14.789668 (XEN) 2: [0.1] flags=0 cpu=0 credit=8831207 [w=256] load=342 (~0%) Oct 3 03:17:14.789734 (XEN) Runqueue 0: Oct 3 03:17:14.789776 (XEN) CPU[00] runq=0, sibling={0}, core={0-1} Oct 3 03:17:14.801788 (XEN) CPU[01] runq=0, sibling={1}, core={0-1} Oct 3 03:17:14.801849 (XEN) RUNQ: Oct 3 03:17:14.801889 (XEN) 0: [0.0] flags=0 cpu=1 credit=5601795 [w=256] load=1026 (~0%) Oct 3 03:17:14.813663 (XEN) CPUs info: Oct 3 03:17:14.813693 (XEN) CPU[00] current=d[IDLE]v0, curr=d[IDLE]v0, prev=NULL Oct 3 03:17:14.813720 (XEN) CPU[01] current=d[IDLE]v1, curr=d[IDLE]v1, prev=NULL Oct 3 03:17:14.825684 Oct 3 03:17:16.727805 Oct 3 03:17:18.513315 Oct 3 03:17:18.736785 (XEN) Synced stime skew: max=125ns avg=125ns samples=1 current=125ns Oct 3 03:17:18.761783 (XEN) Synced cycles skew: max=3 avg=3 samples=1 current=3 Oct 3 03:17:18.761843 Oct 3 03:17:18.764033 Oct 3 03:17:20.744454 Oct 3 03:17:22.521789 Oct 3 03:17:22.714041 Oct 3 03:17:24.528265 Oct 3 03:17:24.769623 Oct 3 03:17:26.536564 Oct 3 03:17:36.773177 (XEN) 'q' pressed -> dumping domain info (now = 3012277544666) Oct 3 03:17:36.797815 (XEN) General information for domain 0: Oct 3 03:17:36.797877 (XEN) refcnt=3 dying=0 paus Oct 3 03:17:36.800221 e_count=0 Oct 3 03:17:36.809728 (XEN) nr_pages=131072 xenheap_pages=3 dirty_cpus={} max_pages=131072 Oct 3 03:17:36.809788 (XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=00000020 Oct 3 03:17:36.821809 (XEN) p2m mappings for domain 0 (vmid 1): Oct 3 03:17:36.821870 (XEN) 1G mappings: 0 (shattered 0) Oct 3 03:17:36.821916 (XEN) 2M mappings: 225 (shattered 31) Oct 3 03:17:36.833769 (XEN) 4K mappings: 8547 Oct 3 03:17:36.833827 (XEN) Rangesets belonging to domain 0: Oct 3 03:17:36.833874 (XEN) Interrupts { 32-72, 74, 77-79, 82-84, 86, 88-100, 103-104, 107-110, 114, 116-120, 123, 126-128, 138, 144, 146-147, 149-151, 156 } Oct 3 03:17:36.845797 (XEN) I/O Memory { 2020-2050, 3810-3811, 3830-3831, 3860-3861, 10000-10001, 10010-10045, 10050-10055, 10060-10061, 101b0-101b1, 101d0-101d1, 101e0-101e1, 10440-10441, 10800-10801, 10830-10831, 10850-10851, 10a60-10a61, 10d10-10d11, 11000-11010, 11200-11201, 11210-11211, 11400-11401, 11800-11805, 11c00-11c01, 11c10-11c11, 11d40-11d41, 11f20-11f21, 12000-12010, 12100-12101, 12110-12111, 12120-12121, 12130-12131, 12170-12171, 121a0-121a1, 121b0-121b1, 121d0-121d1, 12200-12201, 12210-12211, 12220-12221, 12230-12231, 12250-12251, 122f0-122f1, 12c00-12c01, 12c10-12c11, 12c30-12c31, 12c60-12c61, 12c70-12c71, 12c80-12c81, 12c90-12c91, 12ca0-12ca1, 12cb0-12cb1, 12cc0-12cc1, 12cd0-12cd1, 12ce0-12ce1, 12d10-12d11, 12d20-12d21, 12d30-12d31, 12d40-12d41, 12d60-12d61, 12d70-12d71, 12dd0-12dd1, 13260-13261, 13270-13271, 13280-13281, 13290-13291, 132a0-132a1, 132b0-132b1, 132c0-132c1, 132d0-132d1, 132e0-132e1, 132f0-132f1, 13400-13401, 13c40-13c41, 13c50-13c51, 13e00-13e01, 13e10-13e11, 13e20-13e21, 13e30-13e31, 13e80-13e81, 13e90-13e91, 13ea0-13ea1, 13eb0-13eb1, 14400-14440, 14450-14460, 14500-14510, 14530-145a0, 145b0-145b1, 14640-14641, 14650-14651 } Oct 3 03:17:36.941785 (XEN) NODE affinity for domain 0: [0] Oct 3 03:17:36.953758 (XEN) VCPU information and callbacks for domain 0: Oct 3 03:17:36.953818 (XEN) UNIT0 affinities: hard={0-1} soft={0-1} Oct 3 03:17:36.953865 (XEN) VCPU0: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 03:17:36.965775 (XEN) pause_count=0 pause_flags=1 Oct 3 03:17:36.965833 (XEN) GICH_LRs (vcpu 0) mask=0 Oct 3 03:17:36.965877 (XEN) VCPU_LR[0]=0 Oct 3 03:17:36.977785 (XEN) VCPU_LR[1]=0 Oct 3 03:17:36.977853 (XEN) VCPU_LR[2]=0 Oct 3 03:17:36.977898 (XEN) VCPU_LR[3]=0 Oct 3 03:17:36.977939 (XEN) No periodic timer Oct 3 03:17:36.977981 (XEN) UNIT1 affinities: hard={0-1} soft={0-1} Oct 3 03:17:36.989751 (XEN) VCPU1: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 03:17:36.989814 (XEN) pause_count=0 pause_flags=1 Oct 3 03:17:36.989859 (XEN) GICH_LRs (vcpu 1) mask=0 Oct 3 03:17:37.001757 (XEN) VCPU_LR[0]=0 Oct 3 03:17:37.001812 (XEN) VCPU_LR[1]=0 Oct 3 03:17:37.001854 (XEN) VCPU_LR[2]=0 Oct 3 03:17:37.001894 (XEN) VCPU_LR[3]=0 Oct 3 03:17:37.001934 (XEN) No periodic timer Oct 3 03:17:37.013725 (XEN) Notifying guest 0:0 (virq 1, port 0) Oct 3 03:17:37.013785 (XEN) Notifying guest 0:1 (virq 1, port 0) Oct 3 03:17:37.013831 Oct 3 03:17:48.793251 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 03:17:48.809831 Oct 3 03:17:48.809900 arndale-westfield login: Oct 3 03:17:48.811804 [ 3183.927754] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 03:20:33.749731 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 03:23:12.653027 [ 3721.162040] EXT4-fs (dm-3): unmounting filesystem. Oct 3 03:29:30.977663 [ 3731.920715] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 03:29:41.737652 [ 3736.989661] EXT4-fs (dm-3): unmounting filesystem. Oct 3 03:29:46.808960 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 03:29:54.133746 [ 3752.456621] xenbr0: port 2(vif14.0) entered blocking state Oct 3 03:30:02.273755 [ 3752.460789] xenbr0: port 2(vif14.0) entered disabled state Oct 3 03:30:02.273841 [ 3752.466502] device vif14.0 entered promiscuous mode Oct 3 03:30:02.273891 (XEN) d14v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 03:30:03.365755 (XEN) d14v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:30:03.377695 (XEN) d14v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:30:03.413789 (XEN) d14v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:30:03.437726 (XEN) d14v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:30:03.461780 [ 3754.149424] xen-blkback: backend/vbd/14/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:30:03.965769 [ 3754.192901] xen-blkback: backend/vbd/14/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:30:04.013662 (XEN) common/grant_table.c:1909:d14v2 Expanding d14 grant table from 1 to 2 frames Oct 3 03:30:04.025843 (XEN) common/grant_table.c:1909:d14v2 Expanding d14 grant table from 2 to 3 frames Oct 3 03:30:04.037697 [ 3754.320618] vif vif-14-0 vif14.0: Guest Rx ready Oct 3 03:30:04.133747 [ 3754.323967] IPv6: ADDRCONF(NETDEV_CHANGE): vif14.0: link becomes ready Oct 3 03:30:04.133813 [ 3754.332002] xenbr0: port 2(vif14.0) entered blocking state Oct 3 03:30:04.145704 [ 3754.338544] xenbr0: port 2(vif14.0) entered forwarding state Oct 3 03:30:04.145760 (XEN) common/grant_table.c:1909:d14v0 Expanding d14 grant table from 3 to 4 frames Oct 3 03:30:27.273021 [ 3807.015368] xenbr0: port 2(vif14.0) entered disabled state Oct 3 03:30:56.828824 [ 3807.297665] xenbr0: port 2(vif14.0) entered disabled state Oct 3 03:30:57.108873 [ 3807.302459] device vif14.0 left promiscuous mode Oct 3 03:30:57.120873 [ 3807.306491] xenbr0: port 2(vif14.0) entered disabled state Oct 3 03:30:57.120873 [ 3834.920563] xenbr0: port 2(vif15.0) entered blocking state Oct 3 03:31:24.733667 [ 3834.924714] xenbr0: port 2(vif15.0) entered disabled state Oct 3 03:31:24.745606 [ 3834.930480] device vif15.0 entered promiscuous mode Oct 3 03:31:24.745606 (XEN) d15v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 03:31:25.813676 (XEN) d15v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:31:25.837617 (XEN) d15v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:31:25.873604 (XEN) d15v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:31:25.897626 (XEN) d15v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:31:25.921638 [ 3836.577161] xen-blkback: backend/vbd/15/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:31:26.389644 [ 3836.613971] xen-blkback: backend/vbd/15/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:31:26.437639 (XEN) common/grant_table.c:1909:d15v3 Expanding d15 grant table from 1 to 2 frames Oct 3 03:31:26.437676 (XEN) common/grant_table.c:1909:d15v3 Expanding d15 grant table from 2 to 3 frames Oct 3 03:31:26.449634 [ 3836.738464] vif vif-15-0 vif15.0: Guest Rx ready Oct 3 03:31:26.549658 [ 3836.742704] IPv6: ADDRCONF(NETDEV_CHANGE): vif15.0: link becomes ready Oct 3 03:31:26.561661 [ 3836.749885] xenbr0: port 2(vif15.0) entered blocking state Oct 3 03:31:26.561694 [ 3836.755391] xenbr0: port 2(vif15.0) entered forwarding state Oct 3 03:31:26.573577 (XEN) common/grant_table.c:1909:d15v2 Expanding d15 grant table from 3 to 4 frames Oct 3 03:31:45.657774 [ 3886.696994] xenbr0: port 2(vif15.0) entered disabled state Oct 3 03:32:16.513054 [ 3886.967873] xenbr0: port 2(vif15.0) entered disabled state Oct 3 03:32:16.777152 [ 3886.972750] device vif15.0 left promiscuous mode Oct 3 03:32:16.789041 [ 3886.976696] xenbr0: port 2(vif15.0) entered disabled state Oct 3 03:32:16.789106 [ 3913.893815] xenbr0: port 2(vif16.0) entered blocking state Oct 3 03:32:43.701776 [ 3913.897999] xenbr0: port 2(vif16.0) entered disabled state Oct 3 03:32:43.713736 [ 3913.903674] device vif16.0 entered promiscuous mode Oct 3 03:32:43.713798 (XEN) d16v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 03:32:44.797051 (XEN) d16v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:32:44.808821 (XEN) d16v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:32:44.844987 (XEN) d16v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:32:44.880777 (XEN) d16v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:32:44.904997 [ 3915.517973] xen-blkback: backend/vbd/16/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:32:45.337033 (XEN) common/grant_table.c:1909:d16v1 Expanding d16 grant table from 1 to 2 frames Oct 3 03:32:45.373130 [ 3915.567961] xen-blkback: backend/vbd/16/51713(XEN) common/grant_table.c:1909:d16v1 Expanding d16 grant table from 2 to 3 frames Oct 3 03:32:45.385019 : using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:32:45.396945 [ 3915.661714] vif vif-16-0 vif16.0: Guest Rx ready Oct 3 03:32:45.468977 [ 3915.665953] IPv6: ADDRCONF(NETDEV_CHANGE): vif16.0: link becomes ready Oct 3 03:32:45.481053 [ 3915.672361] xenbr0: port 2(vif16.0) entered blocking state Oct 3 03:32:45.481112 [ 3915.679121] xenbr0: port 2(vif16.0) entered forwarding state Oct 3 03:32:45.492997 (XEN) common/grant_table.c:1909:d16v3 Expanding d16 grant table from 3 to 4 frames Oct 3 03:33:04.469761 [ 3965.767246] xenbr0: port 2(vif16.0) entered disabled state Oct 3 03:33:35.573823 [ 3966.027596] xenbr0: port 2(vif16.0) entered disabled state Oct 3 03:33:35.837882 [ 3966.032073] device vif16.0 left promiscuous mode Oct 3 03:33:35.837975 [ 3966.036412] xenbr0: port 2(vif16.0) entered disabled state Oct 3 03:33:35.849660 [ 3992.884620] xenbr0: port 2(vif17.0) entered blocking state Oct 3 03:34:02.697760 [ 3992.888789] xenbr0: port 2(vif17.0) entered disabled state Oct 3 03:34:02.697833 [ 3992.894482] device vif17.0 entered promiscuous mode Oct 3 03:34:02.709692 (XEN) d17v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 03:34:03.789673 (XEN) d17v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:34:03.801747 (XEN) d17v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:34:03.837704 (XEN) d17v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:34:03.861678 (XEN) d17v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:34:03.885660 [ 3994.533721] xen-blkback: backend/vbd/17/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:34:04.353596 [ 3994.579809] xen-blkback: backend/vbd/17/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:34:04.401609 (XEN) common/grant_table.c:1909:d17v2 Expanding d17 grant table from 1 to 2 frames Oct 3 03:34:04.413627 (XEN) common/grant_table.c:1909:d17v2 Expanding d17 grant table from 2 to 3 frames Oct 3 03:34:04.413665 [ 3994.709084] vif vif-17-0 vif17.0: Guest Rx ready Oct 3 03:34:04.521635 [ 3994.713628] IPv6: ADDRCONF(NETDEV_CHANGE): vif17.0: link becomes ready Oct 3 03:34:04.533631 [ 3994.721207] xenbr0: port 2(vif17.0) entered blocking state Oct 3 03:34:04.533666 [ 3994.725331] xenbr0: port 2(vif17.0) entered forwarding state Oct 3 03:34:04.545679 (XEN) common/grant_table.c:1909:d17v2 Expanding d17 grant table from 3 to 4 frames Oct 3 03:34:23.265822 [ 4044.849965] xenbr0: port 2(vif17.0) entered disabled state Oct 3 03:34:54.657834 [ 4045.067552] xenbr0: port 2(vif17.0) entered disabled state Oct 3 03:34:54.873781 [ 4045.072351] device vif17.0 left promiscuous mode Oct 3 03:34:54.885767 [ 4045.076410] xenbr0: port 2(vif17.0) entered disabled state Oct 3 03:34:54.885792 [ 4071.933720] xenbr0: port 2(vif18.0) entered blocking state Oct 3 03:35:21.744867 [ 4071.937918] xenbr0: port 2(vif18.0) entered disabled state Oct 3 03:35:21.756882 [ 4071.943560] device vif18.0 entered promiscuous mode Oct 3 03:35:21.756882 (XEN) d18v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 03:35:22.829787 (XEN) d18v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:35:22.841768 (XEN) d18v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:35:22.877789 (XEN) d18v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:35:22.901815 (XEN) d18v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:35:22.925824 [ 4073.543408] xen-blkback: backend/vbd/18/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:35:23.357690 (XEN) common/grant_table.c:1909:d18v1 Expanding d18 grant table from 1 to 2 frames Oct 3 03:35:23.393751 [ 4073.590517] xen-blkback: backend/vbd/18/51713: using 2 queues(XEN) common/grant_table.c:1909:d18v1 Expanding d18 grant table from 2 to 3 frames Oct 3 03:35:23.405771 , protocol 1 (arm-abi) persistent grants Oct 3 03:35:23.417709 [ 4073.676191] vif vif-18-0 vif18.0: Guest Rx ready Oct 3 03:35:23.489721 [ 4073.680484] IPv6: ADDRCONF(NETDEV_CHANGE): vif18.0: link becomes ready Oct 3 03:35:23.489768 [ 4073.689794] xenbr0: port 2(vif18.0) entered blocking state Oct 3 03:35:23.505758 [ 4073.695916] xenbr0: port 2(vif18.0) entered forwarding state Oct 3 03:35:23.505823 (XEN) common/grant_table.c:1909:d18v1 Expanding d18 grant table from 3 to 4 frames Oct 3 03:35:42.489765 [ 4124.019727] xenbr0: port 2(vif18.0) entered disabled state Oct 3 03:36:13.829831 [ 4124.247841] xenbr0: port 2(vif18.0) entered disabled state Oct 3 03:36:14.057780 [ 4124.252334] device vif18.0 left promiscuous mode Oct 3 03:36:14.057843 [ 4124.256669] xenbr0: port 2(vif18.0) entered disabled state Oct 3 03:36:14.069697 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 03:36:35.825731 [ 4151.116762] xenbr0: port 2(vif19.0) entered blocking state Oct 3 03:36:40.925663 [ 4151.120907] xenbr0: port 2(vif19.0) entered disabled state Oct 3 03:36:40.937637 [ 4151.126640] device vif19.0 entered promiscuous mode Oct 3 03:36:40.937637 (XEN) d19v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 03:36:42.017623 (XEN) d19v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:36:42.029623 (XEN) d19v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:36:42.065599 (XEN) d19v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:36:42.089620 (XEN) d19v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:36:42.113751 [ 4152.691174] xen-blkback: backend/vbd/19/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:36:42.513039 [ 4152.729029] xen-blkback: backend/vbd/19/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:36:42.548901 (XEN) common/grant_table.c:1909:d19v1 Expanding d19 grant table from 1 to 2 frames Oct 3 03:36:42.548901 (XEN) common/grant_table.c:1909:d19v1 Expanding d19 grant table from 2 to 3 frames Oct 3 03:36:42.560895 [ 4152.809652] vif vif-19-0 vif19.0: Guest Rx ready Oct 3 03:36:42.621065 [ 4152.813652] IPv6: ADDRCONF(NETDEV_CHANGE): vif19.0: link becomes ready Oct 3 03:36:42.633038 [ 4152.823162] xenbr0: port 2(vif19.0) entered blocking state Oct 3 03:36:42.633112 [ 4152.828325] xenbr0: port 2(vif19.0) entered forwarding state Oct 3 03:36:42.644856 (XEN) common/grant_table.c:1909:d19v1 Expanding d19 grant table from 3 to 4 frames Oct 3 03:37:01.805663 [ 4203.145175] xenbr0: port 2(vif19.0) entered disabled state Oct 3 03:37:32.953830 [ 4203.407571] xenbr0: port 2(vif19.0) entered disabled state Oct 3 03:37:33.217774 [ 4203.412025] device vif19.0 left promiscuous mode Oct 3 03:37:33.217838 [ 4203.416384] xenbr0: port 2(vif19.0) entered disabled state Oct 3 03:37:33.229735 [ 4230.324777] xenbr0: port 2(vif20.0) entered blocking state Oct 3 03:38:00.133772 [ 4230.328962] xenbr0: port 2(vif20.0) entered disabled state Oct 3 03:38:00.145670 [ 4230.334634] device vif20.0 entered promiscuous mode Oct 3 03:38:00.145670 (XEN) d20v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 03:38:01.217662 (XEN) d20v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:38:01.229663 (XEN) d20v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:38:01.277617 (XEN) d20v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:38:01.301742 (XEN) d20v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:38:01.337696 [ 4232.053758] xen-blkback: backend/vbd/20/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:38:01.865734 [ 4232.098079] xen-blkback: backend/vbd/20/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:38:01.913783 (XEN) common/grant_table.c:1909:d20v0 Expanding d20 grant table from 1 to 2 frames Oct 3 03:38:01.949742 (XEN) common/grant_table.c:1909:d20v0 Expanding d20 grant table from 2 to 3 frames Oct 3 03:38:01.949813 [ 4232.231699] vif vif-20-0 vif20.0: Guest Rx ready Oct 3 03:38:02.045709 [ 4232.239439] IPv6: ADDRCONF(NETDEV_CHANGE): vif20.0: link becomes ready Oct 3 03:38:02.057729 [ 4232.246068] xenbr0: port 2(vif20.0) entered blocking state Oct 3 03:38:02.057798 [ 4232.251968] xenbr0: port 2(vif20.0) entered forwarding state Oct 3 03:38:02.069705 (XEN) common/grant_table.c:1909:d20v0 Expanding d20 grant table from 3 to 4 frames Oct 3 03:38:20.969963 [ 4282.749716] xenbr0: port 2(vif20.0) entered disabled state Oct 3 03:38:52.561804 [ 4283.027621] xenbr0: port 2(vif20.0) entered disabled state Oct 3 03:38:52.837669 [ 4283.032724] device vif20.0 left promiscuous mode Oct 3 03:38:52.837701 [ 4283.036456] xenbr0: port 2(vif20.0) entered disabled state Oct 3 03:38:52.849469 [ 4310.147491] xenbr0: port 2(vif21.0) entered blocking state Oct 3 03:39:19.953882 [ 4310.151611] xenbr0: port 2(vif21.0) entered disabled state Oct 3 03:39:19.953981 [ 4310.157388] device vif21.0 entered promiscuous mode Oct 3 03:39:19.965684 (XEN) d21v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 03:39:21.045748 (XEN) d21v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:39:21.069692 (XEN) d21v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:39:21.093733 (XEN) d21v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:39:21.129765 (XEN) d21v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:39:21.153724 [ 4311.833156] xen-blkback: backend/vbd/21/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:39:21.645707 [ 4311.874869] xen-blkback: backend/vbd/21/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:39:21.681822 (XEN) common/grant_table.c:1909:d21v0 Expanding d21 grant table from 1 to 2 frames Oct 3 03:39:21.717730 (XEN) common/grant_table.c:1909:d21v0 Expanding d21 grant table from 2 to 3 frames Oct 3 03:39:21.717799 [ 4312.010743] vif vif-21-0 vif21.0: Guest Rx ready Oct 3 03:39:21.813741 [ 4312.015857] IPv6: ADDRCONF(NETDEV_CHANGE): vif21.0: link becomes ready Oct 3 03:39:21.825744 [ 4312.024057] xenbr0: port 2(vif21.0) entered blocking state Oct 3 03:39:21.825807 [ 4312.030234] xenbr0: port 2(vif21.0) entered forwarding state Oct 3 03:39:21.837745 (XEN) common/grant_table.c:1909:d21v2 Expanding d21 grant table from 3 to 4 frames Oct 3 03:39:40.797794 [ 4366.809507] xenbr0: port 2(vif21.0) entered disabled state Oct 3 03:40:16.617726 [ 4367.047610] xenbr0: port 2(vif21.0) entered disabled state Oct 3 03:40:16.857866 [ 4367.052053] device vif21.0 left promiscuous mode Oct 3 03:40:16.857931 [ 4367.056429] xenbr0: port 2(vif21.0) entered disabled state Oct 3 03:40:16.869798 [ 4393.828642] xenbr0: port 2(vif22.0) entered blocking state Oct 3 03:40:43.636880 [ 4393.832766] xenbr0: port 2(vif22.0) entered disabled state Oct 3 03:40:43.648840 [ 4393.838554] device vif22.0 entered promiscuous mode Oct 3 03:40:43.648840 (XEN) d22v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 03:40:44.720845 (XEN) d22v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:40:44.732844 (XEN) d22v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:40:44.768847 (XEN) d22v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:40:44.792828 (XEN) d22v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:40:44.828846 [ 4395.565639] xen-blkback: backend/vbd/22/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:40:45.380803 [ 4395.620886] xen-blkback: backend/vbd/22/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:40:45.428886 (XEN) common/grant_table.c:1909:d22v0 Expanding d22 grant table from 1 to 2 frames Oct 3 03:40:45.452849 (XEN) common/grant_table.c:1909:d22v0 Expanding d22 grant table from 2 to 3 frames Oct 3 03:40:45.464754 [ 4395.763886] vif vif-22-0 vif22.0: Guest Rx ready Oct 3 03:40:45.573049 [ 4395.767694] IPv6: ADDRCONF(NETDEV_CHANGE): vif22.0: link becomes ready Oct 3 03:40:45.584918 [ 4395.774884] xenbr0: port 2(vif22.0) entered blocking state Oct 3 03:40:45.584918 [ 4395.780794] xenbr0: port 2(vif22.0) entered forwarding state Oct 3 03:40:45.596804 (XEN) common/grant_table.c:1909:d22v0 Expanding d22 grant table from 3 to 4 frames Oct 3 03:41:04.629760 [ 4445.736199] xenbr0: port 2(vif22.0) entered disabled state Oct 3 03:41:35.541690 [ 4445.957427] xenbr0: port 2(vif22.0) entered disabled state Oct 3 03:41:35.757657 [ 4445.961989] device vif22.0 left promiscuous mode Oct 3 03:41:35.769716 [ 4445.966240] xenbr0: port 2(vif22.0) entered disabled state Oct 3 03:41:35.769762 [ 4472.822433] xenbr0: port 2(vif23.0) entered blocking state Oct 3 03:42:02.621673 [ 4472.826555] xenbr0: port 2(vif23.0) entered disabled state Oct 3 03:42:02.633649 [ 4472.832332] device vif23.0 entered promiscuous mode Oct 3 03:42:02.633681 (XEN) d23v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 03:42:03.725741 (XEN) d23v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:42:03.737727 (XEN) d23v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:42:03.773716 (XEN) d23v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:42:03.797723 (XEN) d23v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:42:03.821643 [ 4474.553442] xen-blkback: backend/vbd/23/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:42:04.361852 [ 4474.599483] xen-blkback: backend/vbd/23/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:42:04.409781 (XEN) common/grant_table.c:1909:d23v3 Expanding d23 grant table from 1 to 2 frames Oct 3 03:42:04.421768 (XEN) common/grant_table.c:1909:d23v3 Expanding d23 grant table from 2 to 3 frames Oct 3 03:42:04.433700 [ 4474.719667] vif vif-23-0 vif23.0: Guest Rx ready Oct 3 03:42:04.529710 [ 4474.723022] IPv6: ADDRCONF(NETDEV_CHANGE): vif23.0: link becomes ready Oct 3 03:42:04.529727 [ 4474.731784] xenbr0: port 2(vif23.0) entered blocking state Oct 3 03:42:04.541712 [ 4474.738228] xenbr0: port 2(vif23.0) entered forwarding state Oct 3 03:42:04.553739 (XEN) common/grant_table.c:1909:d23v2 Expanding d23 grant table from 3 to 4 frames Oct 3 03:42:23.672666 [ 4525.105493] xenbr0: port 2(vif23.0) entered disabled state Oct 3 03:42:54.909784 [ 4525.297610] xenbr0: port 2(vif23.0) entered disabled state Oct 3 03:42:55.101628 [ 4525.308105] device vif23.0 left promiscuous mode Oct 3 03:42:55.113649 [ 4525.311376] xenbr0: port 2(vif23.0) entered disabled state Oct 3 03:42:55.125600 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 03:43:17.184629 [ 4552.307985] xenbr0: port 2(vif24.0) entered blocking state Oct 3 03:43:22.117729 [ 4552.312112] xenbr0: port 2(vif24.0) entered disabled state Oct 3 03:43:22.117768 [ 4552.317865] device vif24.0 entered promiscuous mode Oct 3 03:43:22.117819 (XEN) d24v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 03:43:23.197763 (XEN) d24v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:43:23.209850 (XEN) d24v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:43:23.245803 (XEN) d24v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:43:23.281755 (XEN) d24v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:43:23.305868 [ 4553.871368] xen-blkback: backend/vbd/24/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:43:23.677832 [ 4553.921800] xen-blkback: backend/vbd/24/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:43:23.737756 (XEN) common/grant_table.c:1909:d24v3 Expanding d24 grant table from 1 to 2 frames Oct 3 03:43:23.749773 (XEN) common/grant_table.c:1909:d24v3 Expanding d24 grant table from 2 to 3 frames Oct 3 03:43:23.761805 [ 4554.064758] vif vif-24-0 vif24.0: Guest Rx ready Oct 3 03:43:23.869765 [ 4554.068674] IPv6: ADDRCONF(NETDEV_CHANGE): vif24.0: link becomes ready Oct 3 03:43:23.881773 [ 4554.077780] xenbr0: port 2(vif24.0) entered blocking state Oct 3 03:43:23.881832 [ 4554.083155] xenbr0: port 2(vif24.0) entered forwarding state Oct 3 03:43:23.893789 (XEN) common/grant_table.c:1909:d24v2 Expanding d24 grant table from 3 to 4 frames Oct 3 03:43:42.965684 [ 4604.297303] xenbr0: port 2(vif24.0) entered disabled state Oct 3 03:44:14.109094 [ 4604.557679] xenbr0: port 2(vif24.0) entered disabled state Oct 3 03:44:14.365049 [ 4604.562237] device vif24.0 left promiscuous mode Oct 3 03:44:14.365117 [ 4604.566512] xenbr0: port 2(vif24.0) entered disabled state Oct 3 03:44:14.376948 [ 4631.812486] xenbr0: port 2(vif25.0) entered blocking state Oct 3 03:44:41.625148 [ 4631.816604] xenbr0: port 2(vif25.0) entered disabled state Oct 3 03:44:41.625270 [ 4631.822396] device vif25.0 entered promiscuous mode Oct 3 03:44:41.625327 (XEN) d25v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 03:44:42.708916 (XEN) d25v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:44:42.732886 (XEN) d25v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:44:42.768892 (XEN) d25v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:44:42.792853 (XEN) d25v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 03:44:42.816902 [ 4633.439917] xen-blkback: backend/vbd/25/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:44:43.249078 [ 4633.490073] xen-blkback: backend/vbd/25/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 03:44:43.296920 (XEN) common/grant_table.c:1909:d25v2 Expanding d25 grant table from 1 to 2 frames Oct 3 03:44:43.308932 (XEN) common/grant_table.c:1909:d25v2 Expanding d25 grant table from 2 to 3 frames Oct 3 03:44:43.321064 [ 4633.627768] vif vif-25-0 vif25.0: Guest Rx ready Oct 3 03:44:43.429055 [ 4633.631277] IPv6: ADDRCONF(NETDEV_CHANGE): vif25.0: link becomes ready Oct 3 03:44:43.440954 [ 4633.637770] xenbr0: port 2(vif25.0) entered blocking state Oct 3 03:44:43.441000 [ 4633.643322] xenbr0: port 2(vif25.0) entered forwarding state Oct 3 03:44:43.453007 (XEN) common/grant_table.c:1909:d25v2 Expanding d25 grant table from 3 to 4 frames Oct 3 03:45:02.361807 [ 4680.242117] xenbr0: port 2(vif25.0) entered disabled state Oct 3 03:45:30.049627 [ 4680.377616] xenbr0: port 2(vif25.0) entered disabled state Oct 3 03:45:30.181710 [ 4680.382194] device vif25.0 left promiscuous mode Oct 3 03:45:30.181771 [ 4680.386467] xenbr0: port 2(vif25.0) entered disabled state Oct 3 03:45:30.193636 Oct 3 03:45:49.563395 (XEN) *** Serial input to Xen (type 'CTRL-x' three times to switch input) Oct 3 03:45:49.589883 Oct 3 03:45:49.591181 Oct 3 03:45:50.571652 (XEN) '0' pressed -> dumping Dom0's registers Oct 3 03:45:50.589926 (XEN) *** Dumping Dom0 vcpu#0 state: *** Oct 3 03:45:50.589985 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Oct 3 03:45:50.591699 Not tainted ]---- Oct 3 03:45:50.601704 (XEN) CPU: 0 Oct 3 03:45:50.601704 (XEN) PC: c031ce28 Oct 3 03:45:50.601704 (XEN) CPSR: 60010093 MODE:32-bit Guest SVC Oct 3 03:45:50.601715 (XEN) R0: 00000005 R1: 00000000 R2: 00ecebf1 R3: c031ce20 Oct 3 03:45:50.613923 (XEN) R4: c1909d80 R5: c1b12200 R6: c1904d1c R7: c1904d78 Oct 3 03:45:50.613923 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c00 Oct 3 03:45:50.625880 (XEN) USR: SP: bedcd948 LR: b6c17893 Oct 3 03:45:50.625880 (XEN) SVC: SP: c1901f40 LR: c0308df0 SPSR:60010013 Oct 3 03:45:50.625882 (XEN) ABT: SP: c1b22b10 LR: c0300ea0 SPSR:600f0193 Oct 3 03:45:50.637798 (XEN) UND: SP: c1b22b20 LR: c0300fa0 SPSR:60010093 Oct 3 03:45:50.637801 (XEN) IRQ: SP: c1b22b00 LR: c0300ba0 SPSR:60010193 Oct 3 03:45:50.649798 (XEN) FIQ: SP: c1b22b30 LR: c1b22b30 SPSR:00000000 Oct 3 03:45:50.649798 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 03:45:50.649839 (XEN) Oct 3 03:45:50.661885 (XEN) SCTLR: 10c5387d Oct 3 03:45:50.661885 (XEN) TCR: 00000000 Oct 3 03:45:50.661892 (XEN) TTBR0: 0000000064fb406a Oct 3 03:45:50.661938 (XEN) TTBR1: 000000006020406a Oct 3 03:45:50.661981 (XEN) IFAR: b6e03814, IFSR: 00000007 Oct 3 03:45:50.673886 (XEN) DFAR: 005d1318, DFSR: 0000081f Oct 3 03:45:50.673939 (XEN) Oct 3 03:45:50.673939 (XEN) VTCR_EL2: 80003558 Oct 3 03:45:50.673939 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 03:45:50.685808 (XEN) Oct 3 03:45:50.685808 (XEN) SCTLR_EL2: 30cd187f Oct 3 03:45:50.685834 (XEN) HCR_EL2: 007c663f Oct 3 03:45:50.685876 (XEN) TTBR0_EL2: 000000004110e000 Oct 3 03:45:50.685919 (XEN) Oct 3 03:45:50.685957 (XEN) ESR_EL2: 07e00000 Oct 3 03:45:50.697818 (XEN) HPFAR_EL2: 00104810 Oct 3 03:45:50.697818 (XEN) HDFAR: e0807f00 Oct 3 03:45:50.697848 (XEN) HIFAR: c042b7a4 Oct 3 03:45:50.697890 (XEN) Oct 3 03:45:50.697929 (XEN) Guest stack trace from sp=c1901f40: Oct 3 03:45:50.709809 (XEN) Failed to convert stack to physical address Oct 3 03:45:50.709809 (XEN) *** Dumping Dom0 vcpu#1 state: *** Oct 3 03:45:50.709852 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 03:45:50.721899 (XEN) CPU: 0 Oct 3 03:45:50.721899 (XEN) PC: c031ce28 Oct 3 03:45:50.721899 (XEN) CPSR: 60030093 MODE:32-bit Guest SVC Oct 3 03:45:50.721924 (XEN) R0: 00000005 R1: 00000000 R2: 0099f971 R3: c031ce20 Oct 3 03:45:50.733875 (XEN) R4: c210e600 R5: c1b12200 R6: c1904d1c R7: c1904d78 Oct 3 03:45:50.733875 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c00 Oct 3 03:45:50.745795 (XEN) USR: SP: be929118 LR: b6a6306d Oct 3 03:45:50.745799 (XEN) SVC: SP: e08c9f90 LR: c0308df0 SPSR:60030013 Oct 3 03:45:50.745847 (XEN) ABT: SP: c1b22b50 LR: c0300ea0 SPSR:60070193 Oct 3 03:45:50.757796 (XEN) UND: SP: c1b22b60 LR: c0300fa0 SPSR:60030093 Oct 3 03:45:50.757802 (XEN) IRQ: SP: c1b22b40 LR: c0300ba0 SPSR:60030193 Oct 3 03:45:50.769935 (XEN) FIQ: SP: c1b22b70 LR: c1b22b70 SPSR:00000000 Oct 3 03:45:50.769996 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 03:45:50.781975 (XEN) Oct 3 03:45:50.782028 (XEN) SCTLR: 10c5387d Oct 3 03:45:50.782071 (XEN) TCR: 00000000 Oct 3 03:45:50.782112 (XEN) TTBR0: 0000000063fb806a Oct 3 03:45:50.782154 (XEN) TTBR1: 000000006020406a Oct 3 03:45:50.793979 (XEN) IFAR: b6f1802c, IFSR: 00000007 Oct 3 03:45:50.794039 (XEN) DFAR: b6c0f000, DFSR: 0000081f Oct 3 03:45:50.794084 (XEN) Oct 3 03:45:50.794122 (XEN) VTCR_EL2: 80003558 Oct 3 03:45:50.794164 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 03:45:50.805963 (XEN) Oct 3 03:45:50.806016 (XEN) SCTLR_EL2: 30cd187f Oct 3 03:45:50.806060 (XEN) HCR_EL2: 007c663f Oct 3 03:45:50.806102 (XEN) TTBR0_EL2: 000000004110e000 Oct 3 03:45:50.806144 (XEN) Oct 3 03:45:50.806181 (XEN) ESR_EL2: 07e00000 Oct 3 03:45:50.817972 (XEN) HPFAR_EL2: 00104810 Oct 3 03:45:50.818028 (XEN) HDFAR: e0807f00 Oct 3 03:45:50.818070 (XEN) HIFAR: c042b7a4 Oct 3 03:45:50.818112 (XEN) Oct 3 03:45:50.818150 (XEN) Guest stack trace from sp=e08c9f90: Oct 3 03:45:50.829970 (XEN) Failed to convert stack to physical address Oct 3 03:45:50.830031 Oct 3 03:45:52.535625 (XEN) 'H' pressed -> dumping heap info (now = 4708050716000) Oct 3 03:45:52.558020 (XEN) heap[node=0][zone=0] -> 16266 pages Oct 3 03:45:52.558081 (XEN) heap[node=0][zone=1] -> 0 Oct 3 03:45:52.560449 pages Oct 3 03:45:52.569796 (XEN) heap[node=0][zone=2] -> 0 pages Oct 3 03:45:52.569826 (XEN) heap[node=0][zone=3] -> 0 pages Oct 3 03:45:52.569851 (XEN) heap[node=0][zone=4] -> 0 pages Oct 3 03:45:52.569875 (XEN) heap[node=0][zone=5] -> 0 pages Oct 3 03:45:52.581962 (XEN) heap[node=0][zone=6] -> 0 pages Oct 3 03:45:52.582020 (XEN) heap[node=0][zone=7] -> 0 pages Oct 3 03:45:52.582065 (XEN) heap[node=0][zone=8] -> 0 pages Oct 3 03:45:52.593992 (XEN) heap[node=0][zone=9] -> 0 pages Oct 3 03:45:52.594076 (XEN) heap[node=0][zone=10] -> 0 pages Oct 3 03:45:52.594124 (XEN) heap[node=0][zone=11] -> 0 pages Oct 3 03:45:52.594168 (XEN) heap[node=0][zone=12] -> 0 pages Oct 3 03:45:52.605961 (XEN) heap[node=0][zone=13] -> 0 pages Oct 3 03:45:52.606020 (XEN) heap[node=0][zone=14] -> 0 pages Oct 3 03:45:52.606064 (XEN) heap[node=0][zone=15] -> 0 pages Oct 3 03:45:52.617867 (XEN) heap[node=0][zone=16] -> 0 pages Oct 3 03:45:52.617927 (XEN) heap[node=0][zone=17] -> 0 pages Oct 3 03:45:52.617973 (XEN) heap[node=0][zone=18] -> 0 pages Oct 3 03:45:52.618016 (XEN) heap[node=0][zone=19] -> 130835 pages Oct 3 03:45:52.629811 (XEN) heap[node=0][zone=20] -> 241593 pages Oct 3 03:45:52.629815 (XEN) heap[node=0][zone=21] -> 0 pages Oct 3 03:45:52.629860 (XEN) heap[node=0][zone=22] -> 0 pages Oct 3 03:45:52.641881 (XEN) heap[node=0][zone=23] -> 0 pages Oct 3 03:45:52.641881 (XEN) heap[node=0][zone=24] -> 0 pages Oct 3 03:45:52.641881 (XEN) heap[node=0][zone=25] -> 0 pages Oct 3 03:45:52.653804 (XEN) heap[node=0][zone=26] -> 0 pages Oct 3 03:45:52.653804 (XEN) heap[node=0][zone=27] -> 0 pages Oct 3 03:45:52.653839 (XEN) heap[node=0][zone=28] -> 0 pages Oct 3 03:45:52.653883 Oct 3 03:45:54.543057 Oct 3 03:45:56.333107 Oct 3 03:45:56.529419 Oct 3 03:45:58.340375 Oct 3 03:45:58.575441 (XEN) Dumping timer queues: Oct 3 03:45:58.593803 (XEN) CPU00: Oct 3 03:45:58.593858 (XEN) ex= 409799us timer=43fdc968 cb=vtimer.c#virt_timer_expired(43fdc960) Oct 3 03:45:58.593914 (XEN) CPU0 Oct 3 03:45:58.596403 1: Oct 3 03:45:58.605835 (XEN) ex= 12706us timer=43fee968 cb=vtimer.c#virt_timer_expired(43fee960) Oct 3 03:45:58.605905 Oct 3 03:46:00.581752 Oct 3 03:46:02.348925 Oct 3 03:46:02.587861 (XEN) 'd' pressed -> dumping registers Oct 3 03:46:02.605774 (XEN) Oct 3 03:46:02.605827 (XEN) *** Dumping CPU0 host state: *** Oct 3 03:46:02.605873 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Oct 3 03:46:02.608133 Not tainted ]---- Oct 3 03:46:02.617751 (XEN) CPU: 0 Oct 3 03:46:02.617806 (XEN) PC: 0025f53c domain.c#idle_loop+0x130/0x1ac Oct 3 03:46:02.617855 (XEN) CPSR: 6000005a MODE:Hypervisor Oct 3 03:46:02.617901 (XEN) R0: 00000000 R1: 00000001 R2: 00000000 R3: 00000000 Oct 3 03:46:02.629786 (XEN) R4: 00000000 R5: 003000e0 R6: 00331324 R7: 00000001 Oct 3 03:46:02.629849 (XEN) R8: 00331104 R9: 00000000 R10:40e00000 R11:4003ff54 R12:fffffffc Oct 3 03:46:02.641776 (XEN) HYP: SP: 4003ff44 LR: 00225b7c Oct 3 03:46:02.641836 (XEN) Oct 3 03:46:02.641877 (XEN) VTCR_EL2: 80003558 Oct 3 03:46:02.641920 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 03:46:02.653734 (XEN) Oct 3 03:46:02.653788 (XEN) SCTLR_EL2: 30cd187f Oct 3 03:46:02.653833 (XEN) HCR_EL2: 007c663f Oct 3 03:46:02.653876 (XEN) TTBR0_EL2: 000000004110e000 Oct 3 03:46:02.653920 (XEN) Oct 3 03:46:02.665732 (XEN) ESR_EL2: 07e00000 Oct 3 03:46:02.665792 (XEN) HPFAR_EL2: 00104810 Oct 3 03:46:02.665837 (XEN) HDFAR: e0807f00 Oct 3 03:46:02.665880 (XEN) HIFAR: c042b7a4 Oct 3 03:46:02.665923 (XEN) Oct 3 03:46:02.665963 (XEN) Xen stack trace from sp=4003ff44: Oct 3 03:46:02.677742 (XEN) 07e00000 00295014 002919bc 4003ff4c 002678fc 00000000 00000000 00000000 Oct 3 03:46:02.677808 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 03:46:02.689821 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 03:46:02.689887 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 03:46:02.701885 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 03:46:02.713840 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 03:46:02.713910 (XEN) Xen call trace: Oct 3 03:46:02.713955 (XEN) [<0025f53c>] domain.c#idle_loop+0x130/0x1ac (PC) Oct 3 03:46:02.725840 (XEN) [<00225b7c>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 03:46:02.725901 (XEN) [<002678fc>] arch_get_xen_caps+0/0x90 Oct 3 03:46:02.725947 (XEN) Oct 3 03:46:02.737818 (XEN) *** Dumping CPU1 host state: *** Oct 3 03:46:02.737878 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 03:46:02.737927 (XEN) CPU: 1 Oct 3 03:46:02.737967 (XEN) PC: 0025f53c domain.c#idle_loop+0x130/0x1ac Oct 3 03:46:02.749823 (XEN) CPSR: 6001005a MODE:Hypervisor Oct 3 03:46:02.749883 (XEN) R0: 00000000 R1: 00000001 R2: 3fd06000 R3: 00000000 Oct 3 03:46:02.761875 (XEN) R4: 00000001 R5: 003000e0 R6: 00331324 R7: 00000002 Oct 3 03:46:02.761938 (XEN) R8: 00331104 R9: 00000001 R10:40e00000 R11:4000ff54 R12:fffffffc Oct 3 03:46:02.773759 (XEN) HYP: SP: 4000ff44 LR: 00225b7c Oct 3 03:46:02.773817 (XEN) Oct 3 03:46:02.773857 (XEN) VTCR_EL2: 80003558 Oct 3 03:46:02.773900 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 03:46:02.773942 (XEN) Oct 3 03:46:02.773981 (XEN) SCTLR_EL2: 30cd187f Oct 3 03:46:02.785721 (XEN) HCR_EL2: 007c663f Oct 3 03:46:02.785778 (XEN) TTBR0_EL2: 00000000ba004000 Oct 3 03:46:02.785822 (XEN) Oct 3 03:46:02.785862 (XEN) ESR_EL2: 07e00000 Oct 3 03:46:02.785903 (XEN) HPFAR_EL2: 00104810 Oct 3 03:46:02.797727 (XEN) HDFAR: e0807f00 Oct 3 03:46:02.797783 (XEN) HIFAR: c09f6d20 Oct 3 03:46:02.797826 (XEN) Oct 3 03:46:02.797865 (XEN) Xen stack trace from sp=4000ff44: Oct 3 03:46:02.797909 (XEN) 07e00000 00301290 00000001 4000ff3c 002681e0 00000000 00000000 00000000 Oct 3 03:46:02.809813 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 03:46:02.821724 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 03:46:02.821787 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 03:46:02.833750 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 03:46:02.833813 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 03:46:02.845744 (XEN) Xen call trace: Oct 3 03:46:02.845800 (XEN) [<0025f53c>] domain.c#idle_loop+0x130/0x1ac (PC) Oct 3 03:46:02.845850 (XEN) [<00225b7c>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 03:46:02.857739 (XEN) [<002681e0>] start_secondary+0x204/0x20c Oct 3 03:46:02.857800 (XEN) Oct 3 03:46:02.857840 Oct 3 03:46:04.588253 (XEN) 'e' pressed -> dumping event-channel info Oct 3 03:46:04.610001 (XEN) Event channel information for domain 0: Oct 3 03:46:04.610060 (XEN) Polling vCPUs: {} Oct 3 03:46:04.610104 (XEN) port Oct 3 03:46:04.612354 [p/m/s] Oct 3 03:46:04.621783 (XEN) 1 [0/0/ - ]: s=3 n=1 x=0 d=0 p=4 Oct 3 03:46:04.621839 (XEN) 2 [0/0/ - ]: s=5 n=0 x=0 v=2 Oct 3 03:46:04.621903 (XEN) 3 [0/0/ - ]: s=5 n=1 x=0 v=3 Oct 3 03:46:04.633864 (XEN) 4 [0/0/ - ]: s=3 n=0 x=0 d=0 p=1 Oct 3 03:46:04.633925 (XEN) 5 [0/0/ - ]: s=3 n=1 x=0 d=0 p=6 Oct 3 03:46:04.633990 (XEN) 6 [0/0/ - ]: s=3 n=0 x=0 d=0 p=5 Oct 3 03:46:04.645789 Oct 3 03:46:06.588022 (XEN) gnttab_usage_print_all [ key 'g' pressed Oct 3 03:46:06.613843 (XEN) -------- active -------- -------- shared -------- Oct 3 03:46:06.613936 (XEN) [ref] locald Oct 3 03:46:06.615904 om mfn pin localdom gmfn flags Oct 3 03:46:06.625800 (XEN) grant-table for remote d0 (v1) Oct 3 03:46:06.625856 (XEN) 2 frames (64 max), 9 maptrack frames (1024 max) Oct 3 03:46:06.638070 (XEN) [0x208] 0 0x64b42 0x00000001 0 0x064b42 0x19 Oct 3 03:46:06.638133 (XEN) [0x209] 0 0x64b41 0x00000001 0 0x064b41 0x19 Oct 3 03:46:06.638201 (XEN) gnttab_usage_print_all ] done Oct 3 03:46:06.649809 Oct 3 03:46:08.602335 Oct 3 03:46:10.366889 Oct 3 03:46:10.602219 (XEN) Physical memory information: Oct 3 03:46:10.625858 (XEN) Xen heap: 65064kB free Oct 3 03:46:10.625890 (XEN) heap[19]: 523340kB free Oct 3 03:46:10.625915 (XEN) heap[20]: 966372kB fr Oct 3 03:46:10.628205 ee Oct 3 03:46:10.637699 (XEN) Dom heap: 1489712kB free Oct 3 03:46:10.637755 Oct 3 03:46:12.595319 Oct 3 03:46:14.379746 Oct 3 03:46:14.622959 (XEN) sched_smt_power_savings: disabled Oct 3 03:46:14.645056 (XEN) NOW=4730138016291 Oct 3 03:46:14.645056 (XEN) Online Cpus: 0-1 Oct 3 03:46:14.645056 (XEN) Cpupool 0: Oct 3 03:46:14.645056 (XEN) Cpus: 0-1 Oct 3 03:46:14.645254 (XEN) Sched Oct 3 03:46:14.647304 uling granularity: cpu, 1 CPU per sched-resource Oct 3 03:46:14.656803 (XEN) Scheduler: SMP Credit Scheduler rev2 (credit2) Oct 3 03:46:14.656803 (XEN) Active queues: 1 Oct 3 03:46:14.656803 (XEN) default-weight = 256 Oct 3 03:46:14.668869 (XEN) Runqueue 0: Oct 3 03:46:14.668869 (XEN) ncpus = 2 Oct 3 03:46:14.668869 (XEN) cpus = 0-1 Oct 3 03:46:14.668869 (XEN) max_weight = 256 Oct 3 03:46:14.679481 (XEN) pick_bias = 0 Oct 3 03:46:14.679481 (XEN) instload = 0 Oct 3 03:46:14.679481 (XEN) aveload = 2207 (~0%) Oct 3 03:46:14.679481 (XEN) idlers: 2 Oct 3 03:46:14.679481 (XEN) tickled: 0 Oct 3 03:46:14.696762 (XEN) fully idle cores: 2 Oct 3 03:46:14.696828 (XEN) Domain info: Oct 3 03:46:14.696871 (XEN) Domain: 0 w 256 c 0 v 2 Oct 3 03:46:14.696913 (XEN) 1: [0.0] flags=0 cpu=1 credit=9558919 [w=256] load=1617 (~0%) Oct 3 03:46:14.696962 (XEN) 2: [0.1] flags=0 cpu=0 credit=10500000 [w=256] load=737 (~0%) Oct 3 03:46:14.709012 (XEN) Runqueue 0: Oct 3 03:46:14.709067 (XEN) CPU[00] runq=0, sibling={0}, core={0-1} Oct 3 03:46:14.709114 (XEN) CPU[01] runq=0, sibling={1}, core={0-1} Oct 3 03:46:14.720893 (XEN) RUNQ: Oct 3 03:46:14.720893 (XEN) CPUs info: Oct 3 03:46:14.720893 (XEN) CPU[00] current=d[IDLE]v0, curr=d[IDLE]v0, prev=NULL Oct 3 03:46:14.720893 (XEN) CPU[01] current=d[IDLE]v1, curr=d[IDLE]v1, prev=NULL Oct 3 03:46:14.732828 Oct 3 03:46:16.628993 Oct 3 03:46:18.391184 Oct 3 03:46:18.637028 (XEN) Synced stime skew: max=167ns avg=146ns samples=2 current=167ns Oct 3 03:46:18.660995 (XEN) Synced cycles skew: max=3 avg=3 samples=2 current=3 Oct 3 03:46:18.661041 Oct 3 03:46:18.663283 Oct 3 03:46:20.632439 Oct 3 03:46:22.400679 Oct 3 03:46:22.645462 Oct 3 03:46:24.403303 Oct 3 03:46:24.635810 Oct 3 03:46:26.408966 Oct 3 03:46:36.664791 (XEN) 'q' pressed -> dumping domain info (now = 4752174994208) Oct 3 03:46:36.681854 (XEN) General information for domain 0: Oct 3 03:46:36.681928 (XEN) refcnt=3 dying=0 paus Oct 3 03:46:36.684272 e_count=0 Oct 3 03:46:36.693719 (XEN) nr_pages=131072 xenheap_pages=3 dirty_cpus={} max_pages=131072 Oct 3 03:46:36.693801 (XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=00000020 Oct 3 03:46:36.705753 (XEN) p2m mappings for domain 0 (vmid 1): Oct 3 03:46:36.705812 (XEN) 1G mappings: 0 (shattered 0) Oct 3 03:46:36.705858 (XEN) 2M mappings: 221 (shattered 35) Oct 3 03:46:36.717770 (XEN) 4K mappings: 12954 Oct 3 03:46:36.717827 (XEN) Rangesets belonging to domain 0: Oct 3 03:46:36.717873 (XEN) Interrupts { 32-72, 74, 77-79, 82-84, 86, 88-100, 103-104, 107-110, 114, 116-120, 123, 126-128, 138, 144, 146-147, 149-151, 156 } Oct 3 03:46:36.729789 (XEN) I/O Memory { 2020-2050, 3810-3811, 3830-3831, 3860-3861, 10000-10001, 10010-10045, 10050-10055, 10060-10061, 101b0-101b1, 101d0-101d1, 101e0-101e1, 10440-10441, 10800-10801, 10830-10831, 10850-10851, 10a60-10a61, 10d10-10d11, 11000-11010, 11200-11201, 11210-11211, 11400-11401, 11800-11805, 11c00-11c01, 11c10-11c11, 11d40-11d41, 11f20-11f21, 12000-12010, 12100-12101, 12110-12111, 12120-12121, 12130-12131, 12170-12171, 121a0-121a1, 121b0-121b1, 121d0-121d1, 12200-12201, 12210-12211, 12220-12221, 12230-12231, 12250-12251, 122f0-122f1, 12c00-12c01, 12c10-12c11, 12c30-12c31, 12c60-12c61, 12c70-12c71, 12c80-12c81, 12c90-12c91, 12ca0-12ca1, 12cb0-12cb1, 12cc0-12cc1, 12cd0-12cd1, 12ce0-12ce1, 12d10-12d11, 12d20-12d21, 12d30-12d31, 12d40-12d41, 12d60-12d61, 12d70-12d71, 12dd0-12dd1, 13260-13261, 13270-13271, 13280-13281, 13290-13291, 132a0-132a1, 132b0-132b1, 132c0-132c1, 132d0-132d1, 132e0-132e1, 132f0-132f1, 13400-13401, 13c40-13c41, 13c50-13c51, 13e00-13e01, 13e10-13e11, 13e20-13e21, 13e30-13e31, 13e80-13e81, 13e90-13e91, 13ea0-13ea1, 13eb0-13eb1, 14400-14440, 14450-14460, 14500-14510, 14530-145a0, 145b0-145b1, 14640-14641, 14650-14651 } Oct 3 03:46:36.825809 (XEN) NODE affinity for domain 0: [0] Oct 3 03:46:36.837783 (XEN) VCPU information and callbacks for domain 0: Oct 3 03:46:36.837843 (XEN) UNIT0 affinities: hard={0-1} soft={0-1} Oct 3 03:46:36.837890 (XEN) VCPU0: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 03:46:36.849783 (XEN) pause_count=0 pause_flags=1 Oct 3 03:46:36.849841 (XEN) GICH_LRs (vcpu 0) mask=0 Oct 3 03:46:36.849924 (XEN) VCPU_LR[0]=0 Oct 3 03:46:36.861804 (XEN) VCPU_LR[1]=0 Oct 3 03:46:36.861861 (XEN) VCPU_LR[2]=0 Oct 3 03:46:36.861918 (XEN) VCPU_LR[3]=0 Oct 3 03:46:36.861962 (XEN) Inflight irq=103 lr=0 Oct 3 03:46:36.862005 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.873768 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.873825 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.873869 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.873911 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.873989 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.885779 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.885836 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.885879 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.885921 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.897799 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.897856 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.897899 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.897941 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.897982 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.909722 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.909756 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.909780 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.909803 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.921742 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.921793 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.921836 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.921878 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.921920 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.933650 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.933650 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.933650 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.933650 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.945732 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.945786 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.945829 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.945890 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.957743 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.957792 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.957835 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.957876 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.957917 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.969727 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.969776 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.969819 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.969859 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.981795 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.981853 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.981897 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.981938 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.981980 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.993775 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.993831 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.993875 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:36.993916 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.005757 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.005815 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.005858 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.005899 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.005940 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.017795 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.017851 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.017895 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.017936 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.029801 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.029859 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.029903 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.029945 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.029987 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.041760 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.041817 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.041860 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.041902 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.053740 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.053797 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.053840 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.053882 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.053923 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.065719 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.065775 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.065819 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.065861 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.077765 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.077822 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.077866 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.077907 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.089736 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.089794 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.089838 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.089880 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.089921 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.101756 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.101813 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.101856 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.101897 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.113738 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.113738 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.113738 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.113738 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.113738 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.125688 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.125688 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.125688 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.125688 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.137657 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.137692 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.137716 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.137738 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.137762 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.149737 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.149787 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.149849 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.149894 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.161753 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.161810 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.161854 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.161896 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.161937 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.173752 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.173808 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.173851 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.173893 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.185739 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.185796 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.185840 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.185881 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.185922 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.197741 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.197741 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.197741 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.197741 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.209788 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.209850 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.209894 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.209935 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.209977 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.221775 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.221832 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.221875 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.221917 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.233776 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.233833 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.233876 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.233918 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.245757 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.245815 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.245859 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.245901 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.245943 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.257756 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.257813 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.257856 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.257898 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.269753 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.269810 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.269853 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.269894 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.269936 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.281778 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.281835 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.281878 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.281920 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.293722 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.293782 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.293826 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.293868 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.293909 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.305702 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.305734 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.305757 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.305780 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.317735 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.317791 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.317834 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.317876 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.317918 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.329649 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.329680 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.329704 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.329726 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.341775 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.341832 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.341876 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.341917 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.341959 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.353788 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.353830 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.353830 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.353830 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.365788 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.365848 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.365892 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.365935 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.365977 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.377800 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.377857 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.377900 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.377942 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.389776 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.389833 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.389876 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.389917 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.401781 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.401839 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.401883 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.401924 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.401966 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.413756 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.413812 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.413856 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.413897 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.425792 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.425849 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.425893 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.425935 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.425977 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.437717 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.437773 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.437817 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.437859 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.449772 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.449830 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.449873 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.449916 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.449957 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.461783 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.461840 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.461883 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.461925 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.473766 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.473823 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.473867 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.473909 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.473951 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.485780 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.485837 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.485880 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.485921 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.497778 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.497835 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.497878 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.497920 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.497961 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.509779 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.509836 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.509878 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.509920 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.521783 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.521840 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.521884 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.521927 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.533764 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.533822 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.533867 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.533909 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.533950 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.545790 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.545847 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.545890 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.545931 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.557790 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.557883 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.557930 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.557999 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.558044 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.569720 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.569843 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.569889 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.569909 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.581794 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.581857 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.581901 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.581942 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.581984 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.593770 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.593827 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.593870 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.593912 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.605788 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.605788 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.605788 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.605788 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.605788 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.617689 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.617725 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.617749 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.617797 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.629810 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.629867 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.629910 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.629952 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.629993 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.641838 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.641895 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.641938 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.641980 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.653817 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.653875 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.653919 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.653960 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.654001 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.665777 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.665834 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.665877 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.665919 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.677757 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.677815 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.677858 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.677900 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.689728 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.689786 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.689829 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.689870 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.689912 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.701756 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.701813 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.701856 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.701898 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.713792 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.713849 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.713893 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.713935 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.713976 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.725748 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.725804 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.725847 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.725888 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.737698 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.737729 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.737753 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.737775 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.737812 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.749780 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.749837 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.749880 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.749922 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.761759 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.761816 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.761859 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.761921 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.761965 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.773783 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.773839 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.773882 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.773924 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.785776 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.785833 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.785877 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.785918 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.785959 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.797793 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.797849 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.797892 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.797933 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.809771 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.809828 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.809871 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.809913 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.809954 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.821785 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.821841 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.821884 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.821960 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.833777 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.833834 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.833877 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.833919 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.845770 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.845828 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.845872 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.845914 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.845955 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.857754 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.857786 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.857809 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.857832 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.869665 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.869665 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.869665 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.869665 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.869665 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.881645 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.881645 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.881645 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.881645 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.893848 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.893919 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.893933 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.893933 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.893933 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.905658 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.905658 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.905658 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.905658 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.917752 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.917752 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.917752 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.917752 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.917752 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.929671 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.929671 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.929671 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.929671 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.941836 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.941893 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.941893 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.941893 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.941893 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.953725 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.953725 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.953725 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.953725 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.965663 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.965663 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.965663 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.965663 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.965663 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.977663 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.977663 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.977663 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.977663 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.989663 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.989663 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.989663 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:37.989663 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.001662 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.001662 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.001916 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.001931 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.002002 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.013661 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.013866 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.013914 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.013914 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.025676 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.025676 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.025676 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.025676 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.025676 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.037634 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.037634 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.037634 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.037634 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.049671 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.049671 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.049671 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.049671 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.049671 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.061672 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.061672 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.061672 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.061672 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.073751 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.073751 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.073751 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.073751 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.073751 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.085676 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.085676 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.085676 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.085676 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.097671 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.097671 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.097671 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.097671 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.097671 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.109658 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.109658 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.109658 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.109658 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.121695 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.121695 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.121695 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.121695 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.133662 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.133662 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.134053 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.134084 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.134084 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.145657 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.145657 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.145657 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.145657 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.157672 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.157672 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.157672 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.157672 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.157672 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.169655 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.169655 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.169655 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.169655 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.181676 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.181676 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.181676 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.181676 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.181676 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.193660 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.193660 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.193660 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.193660 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.205665 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.205665 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.205665 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.205665 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.205665 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.217668 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.217668 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.217668 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.217668 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.229661 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.229661 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.229661 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.229661 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.229661 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.241634 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.241634 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.241634 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.241634 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.253660 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.253660 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.253660 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.253660 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.253660 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.265631 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.265631 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.265631 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.265631 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.277673 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.277673 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.277673 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.277673 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.289662 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.289662 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.289662 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.289662 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.289662 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.301665 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.301665 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.301665 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.301665 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.313585 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.313585 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.313585 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.313585 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.313585 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.325669 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.325669 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.325669 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.325669 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.337659 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.337659 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.337659 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.337659 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.337659 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.349671 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.349671 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.349671 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.349671 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.361664 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.361664 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.361664 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.361664 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.361664 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.373656 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.373656 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.373656 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.373656 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.385707 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.385707 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.385707 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.385707 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.385707 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.397759 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.397819 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.397843 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.397866 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.409751 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.409808 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.409851 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.409894 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.409935 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.421751 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.421807 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.421850 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.421892 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.433744 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.433800 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.433843 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.433886 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.445749 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.445806 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.445850 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.445891 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.445932 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.457742 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.457799 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.457840 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.457863 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.469682 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.469713 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.469737 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.469760 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.469783 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.481740 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.481797 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.481840 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.481881 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.493775 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.493809 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.493834 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.493857 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.493879 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.505729 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.505769 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.505793 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.505818 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.517749 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.517806 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.517859 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.517882 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.517918 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.529773 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.529829 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.529872 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.529914 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.541788 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.541845 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.541889 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.541930 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.541972 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.553771 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.553827 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.553870 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.553912 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.565751 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.565808 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.565851 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.565892 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.577782 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.577782 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.577782 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.577782 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.577782 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.589654 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.589689 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.589713 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.589735 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.601620 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.601647 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.601670 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.601693 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.601715 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.613714 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.613771 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.613814 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.613855 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.625742 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.625800 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.625843 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.625884 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.625926 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.637746 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.637803 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.637846 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.637895 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.649738 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.649796 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.649839 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.649881 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.649922 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.661744 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.661800 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.661843 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.661884 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.673720 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.673776 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.673820 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.673861 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.673903 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.685747 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.685803 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.685846 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.685887 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.697743 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.697800 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.697844 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.697885 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.697927 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.709751 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.709808 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.709851 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.709893 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.721748 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.721805 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.721849 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.721891 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.733747 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.733805 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.733849 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.733890 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.733932 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.745747 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.745803 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.745847 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.745889 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.757768 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.757825 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.757869 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.757911 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.757950 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.769760 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.769817 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.769860 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.769902 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.781777 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.781834 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.781879 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.781944 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.781989 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.793787 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.793844 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.793887 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.793929 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.805769 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.805826 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.805869 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.805911 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.805953 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.817764 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.817820 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.817863 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.817904 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.829779 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.829836 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.829879 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.829921 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.829962 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.841785 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.841841 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.841884 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.841926 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.853751 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.853808 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.853852 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.853895 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.853937 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.865719 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.865719 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.865719 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.865719 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.877793 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.877855 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.877899 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.877941 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.889764 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.889821 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.889865 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.889906 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.889948 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.901787 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.901844 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.901887 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.901929 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.913776 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.913833 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.913877 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.913919 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.913960 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.925762 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.925818 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.925862 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.925904 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.937773 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.937830 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.937873 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.937915 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.937957 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.949783 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.949839 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.949882 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.949924 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.961775 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.961832 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.961877 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.961919 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.961960 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.973779 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.973835 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.973879 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.973921 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.985774 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.985831 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.985875 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.985938 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.985982 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.997789 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.997846 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.997889 (XEN) Inflight irq=103 lr=255 Oct 3 03:46:38.997930 (XEN) Pending irq=103 Oct 3 03:46:39.009727 (XEN) Pending irq=103 Oct 3 03:46:39.009727 (XEN) Pending irq=103 Oct 3 03:46:39.009727 (XEN) Pending irq=103 Oct 3 03:46:39.009727 (XEN) Pending irq=103 Oct 3 03:46:39.009727 (XEN) Pending irq=103 Oct 3 03:46:39.009727 (XEN) Pending irq=103 Oct 3 03:46:39.021794 (XEN) Pending irq=103 Oct 3 03:46:39.021855 (XEN) Pending irq=103 Oct 3 03:46:39.021898 (XEN) Pending irq=103 Oct 3 03:46:39.021939 (XEN) Pending irq=103 Oct 3 03:46:39.021979 (XEN) Pending irq=103 Oct 3 03:46:39.022019 (XEN) Pending irq=103 Oct 3 03:46:39.033764 (XEN) Pending irq=103 Oct 3 03:46:39.033820 (XEN) Pending irq=103 Oct 3 03:46:39.033862 (XEN) Pending irq=103 Oct 3 03:46:39.033903 (XEN) Pending irq=103 Oct 3 03:46:39.033944 (XEN) Pending irq=103 Oct 3 03:46:39.033985 (XEN) Pending irq=103 Oct 3 03:46:39.045778 (XEN) Pending irq=103 Oct 3 03:46:39.045834 (XEN) Pending irq=103 Oct 3 03:46:39.045877 (XEN) Pending irq=103 Oct 3 03:46:39.045918 (XEN) Pending irq=103 Oct 3 03:46:39.045958 (XEN) Pending irq=103 Oct 3 03:46:39.045999 (XEN) Pending irq=103 Oct 3 03:46:39.057766 (XEN) Pending irq=103 Oct 3 03:46:39.057822 (XEN) Pending irq=103 Oct 3 03:46:39.057864 (XEN) Pending irq=103 Oct 3 03:46:39.057904 (XEN) Pending irq=103 Oct 3 03:46:39.057945 (XEN) Pending irq=103 Oct 3 03:46:39.057985 (XEN) Pending irq=103 Oct 3 03:46:39.069769 (XEN) Pending irq=103 Oct 3 03:46:39.069825 (XEN) Pending irq=103 Oct 3 03:46:39.069868 (XEN) Pending irq=103 Oct 3 03:46:39.069909 (XEN) Pending irq=103 Oct 3 03:46:39.069949 (XEN) Pending irq=103 Oct 3 03:46:39.069988 (XEN) Pending irq=103 Oct 3 03:46:39.081782 (XEN) Pending irq=103 Oct 3 03:46:39.081838 (XEN) Pending irq=103 Oct 3 03:46:39.081880 (XEN) Pending irq=103 Oct 3 03:46:39.081920 (XEN) Pending irq=103 Oct 3 03:46:39.081960 (XEN) Pending irq=103 Oct 3 03:46:39.082000 (XEN) Pending irq=103 Oct 3 03:46:39.093773 (XEN) Pending irq=103 Oct 3 03:46:39.093828 (XEN) Pending irq=103 Oct 3 03:46:39.093871 (XEN) Pending irq=103 Oct 3 03:46:39.093912 (XEN) Pending irq=103 Oct 3 03:46:39.093952 (XEN) Pending irq=103 Oct 3 03:46:39.093992 (XEN) Pending irq=103 Oct 3 03:46:39.105760 (XEN) Pending irq=103 Oct 3 03:46:39.105816 (XEN) Pending irq=103 Oct 3 03:46:39.105858 (XEN) Pending irq=103 Oct 3 03:46:39.105898 (XEN) Pending irq=103 Oct 3 03:46:39.105939 (XEN) Pending irq=103 Oct 3 03:46:39.105979 (XEN) Pending irq=103 Oct 3 03:46:39.117772 (XEN) Pending irq=103 Oct 3 03:46:39.117828 (XEN) Pending irq=103 Oct 3 03:46:39.117870 (XEN) Pending irq=103 Oct 3 03:46:39.117910 (XEN) Pending irq=103 Oct 3 03:46:39.117950 (XEN) Pending irq=103 Oct 3 03:46:39.117990 (XEN) Pending irq=103 Oct 3 03:46:39.129767 (XEN) Pending irq=103 Oct 3 03:46:39.129823 (XEN) Pending irq=103 Oct 3 03:46:39.129865 (XEN) Pending irq=103 Oct 3 03:46:39.129906 (XEN) Pending irq=103 Oct 3 03:46:39.129947 (XEN) Pending irq=103 Oct 3 03:46:39.129987 (XEN) Pending irq=103 Oct 3 03:46:39.141729 (XEN) Pending irq=103 Oct 3 03:46:39.141729 (XEN) Pending irq=103 Oct 3 03:46:39.141729 (XEN) Pending irq=103 Oct 3 03:46:39.141729 (XEN) Pending irq=103 Oct 3 03:46:39.141729 (XEN) Pending irq=103 Oct 3 03:46:39.141729 (XEN) Pending irq=103 Oct 3 03:46:39.153785 (XEN) Pending irq=103 Oct 3 03:46:39.153846 (XEN) Pending irq=103 Oct 3 03:46:39.153889 (XEN) Pending irq=103 Oct 3 03:46:39.153929 (XEN) Pending irq=103 Oct 3 03:46:39.153970 (XEN) Pending irq=103 Oct 3 03:46:39.154010 (XEN) Pending irq=103 Oct 3 03:46:39.165798 (XEN) Pending irq=103 Oct 3 03:46:39.165854 (XEN) Pending irq=103 Oct 3 03:46:39.165897 (XEN) Pending irq=103 Oct 3 03:46:39.165937 (XEN) Pending irq=103 Oct 3 03:46:39.165997 (XEN) Pending irq=103 Oct 3 03:46:39.166040 (XEN) Pending irq=103 Oct 3 03:46:39.177774 (XEN) Pending irq=103 Oct 3 03:46:39.177830 (XEN) Pending irq=103 Oct 3 03:46:39.177873 (XEN) Pending irq=103 Oct 3 03:46:39.177913 (XEN) Pending irq=103 Oct 3 03:46:39.177954 (XEN) Pending irq=103 Oct 3 03:46:39.177994 (XEN) Pending irq=103 Oct 3 03:46:39.189731 (XEN) Pending irq=103 Oct 3 03:46:39.189778 (XEN) Pending irq=103 Oct 3 03:46:39.189820 (XEN) Pending irq=103 Oct 3 03:46:39.189859 (XEN) Pending irq=103 Oct 3 03:46:39.189899 (XEN) Pending irq=103 Oct 3 03:46:39.189940 (XEN) Pending irq=103 Oct 3 03:46:39.201786 (XEN) Pending irq=103 Oct 3 03:46:39.201842 (XEN) Pending irq=103 Oct 3 03:46:39.201884 (XEN) Pending irq=103 Oct 3 03:46:39.201924 (XEN) Pending irq=103 Oct 3 03:46:39.201965 (XEN) Pending irq=103 Oct 3 03:46:39.202005 (XEN) Pending irq=103 Oct 3 03:46:39.213765 (XEN) Pending irq=103 Oct 3 03:46:39.213820 (XEN) Pending irq=103 Oct 3 03:46:39.213862 (XEN) Pending irq=103 Oct 3 03:46:39.213903 (XEN) Pending irq=103 Oct 3 03:46:39.213943 (XEN) Pending irq=103 Oct 3 03:46:39.213984 (XEN) Pending irq=103 Oct 3 03:46:39.225767 (XEN) Pending irq=103 Oct 3 03:46:39.225823 (XEN) Pending irq=103 Oct 3 03:46:39.225865 (XEN) Pending irq=103 Oct 3 03:46:39.225906 (XEN) Pending irq=103 Oct 3 03:46:39.225947 (XEN) Pending irq=103 Oct 3 03:46:39.225986 (XEN) Pending irq=103 Oct 3 03:46:39.237774 (XEN) Pending irq=103 Oct 3 03:46:39.237831 (XEN) Pending irq=103 Oct 3 03:46:39.237874 (XEN) Pending irq=103 Oct 3 03:46:39.237914 (XEN) Pending irq=103 Oct 3 03:46:39.237955 (XEN) Pending irq=103 Oct 3 03:46:39.237995 (XEN) Pending irq=103 Oct 3 03:46:39.249725 (XEN) Pending irq=103 Oct 3 03:46:39.249725 (XEN) Pending irq=103 Oct 3 03:46:39.249725 (XEN) Pending irq=103 Oct 3 03:46:39.249725 (XEN) Pending irq=103 Oct 3 03:46:39.249725 (XEN) Pending irq=103 Oct 3 03:46:39.249725 (XEN) Pending irq=103 Oct 3 03:46:39.261762 (XEN) Pending irq=103 Oct 3 03:46:39.261823 (XEN) Pending irq=103 Oct 3 03:46:39.261865 (XEN) Pending irq=103 Oct 3 03:46:39.261905 (XEN) Pending irq=103 Oct 3 03:46:39.261946 (XEN) Pending irq=103 Oct 3 03:46:39.261986 (XEN) Pending irq=103 Oct 3 03:46:39.273778 (XEN) Pending irq=103 Oct 3 03:46:39.273835 (XEN) Pending irq=103 Oct 3 03:46:39.273878 (XEN) Pending irq=103 Oct 3 03:46:39.273919 (XEN) Pending irq=103 Oct 3 03:46:39.273960 (XEN) Pending irq=103 Oct 3 03:46:39.274000 (XEN) Pending irq=103 Oct 3 03:46:39.285762 (XEN) Pending irq=103 Oct 3 03:46:39.285819 (XEN) Pending irq=103 Oct 3 03:46:39.285862 (XEN) Pending irq=103 Oct 3 03:46:39.285902 (XEN) Pending irq=103 Oct 3 03:46:39.285942 (XEN) Pending irq=103 Oct 3 03:46:39.285982 (XEN) Pending irq=103 Oct 3 03:46:39.297782 (XEN) Pending irq=103 Oct 3 03:46:39.297839 (XEN) Pending irq=103 Oct 3 03:46:39.297881 (XEN) Pending irq=103 Oct 3 03:46:39.297923 (XEN) Pending irq=103 Oct 3 03:46:39.297963 (XEN) Pending irq=103 Oct 3 03:46:39.298003 (XEN) Pending irq=103 Oct 3 03:46:39.309765 (XEN) Pending irq=103 Oct 3 03:46:39.309822 (XEN) Pending irq=103 Oct 3 03:46:39.309865 (XEN) Pending irq=103 Oct 3 03:46:39.309906 (XEN) Pending irq=103 Oct 3 03:46:39.309947 (XEN) Pending irq=103 Oct 3 03:46:39.309987 (XEN) Pending irq=103 Oct 3 03:46:39.310027 (XEN) Pending irq=103 Oct 3 03:46:39.321779 (XEN) Pending irq=103 Oct 3 03:46:39.321834 (XEN) Pending irq=103 Oct 3 03:46:39.321875 (XEN) Pending irq=103 Oct 3 03:46:39.321916 (XEN) Pending irq=103 Oct 3 03:46:39.321957 (XEN) Pending irq=103 Oct 3 03:46:39.321997 (XEN) Pending irq=103 Oct 3 03:46:39.333776 (XEN) Pending irq=103 Oct 3 03:46:39.333831 (XEN) Pending irq=103 Oct 3 03:46:39.333873 (XEN) Pending irq=103 Oct 3 03:46:39.333913 (XEN) Pending irq=103 Oct 3 03:46:39.333954 (XEN) Pending irq=103 Oct 3 03:46:39.333994 (XEN) Pending irq=103 Oct 3 03:46:39.345771 (XEN) Pending irq=103 Oct 3 03:46:39.345826 (XEN) Pending irq=103 Oct 3 03:46:39.345887 (XEN) Pending irq=103 Oct 3 03:46:39.345931 (XEN) Pending irq=103 Oct 3 03:46:39.345972 (XEN) Pending irq=103 Oct 3 03:46:39.346012 (XEN) Pending irq=103 Oct 3 03:46:39.357770 (XEN) Pending irq=103 Oct 3 03:46:39.357825 (XEN) Pending irq=103 Oct 3 03:46:39.357867 (XEN) Pending irq=103 Oct 3 03:46:39.357907 (XEN) Pending irq=103 Oct 3 03:46:39.357948 (XEN) Pending irq=103 Oct 3 03:46:39.357989 (XEN) Pending irq=103 Oct 3 03:46:39.369721 (XEN) Pending irq=103 Oct 3 03:46:39.369721 (XEN) Pending irq=103 Oct 3 03:46:39.369721 (XEN) Pending irq=103 Oct 3 03:46:39.369721 (XEN) Pending irq=103 Oct 3 03:46:39.369721 (XEN) Pending irq=103 Oct 3 03:46:39.369721 (XEN) Pending irq=103 Oct 3 03:46:39.381787 (XEN) Pending irq=103 Oct 3 03:46:39.381847 (XEN) Pending irq=103 Oct 3 03:46:39.381889 (XEN) Pending irq=103 Oct 3 03:46:39.381929 (XEN) Pending irq=103 Oct 3 03:46:39.381970 (XEN) Pending irq=103 Oct 3 03:46:39.382010 (XEN) Pending irq=103 Oct 3 03:46:39.393736 (XEN) Pending irq=103 Oct 3 03:46:39.393736 (XEN) Pending irq=103 Oct 3 03:46:39.393736 (XEN) Pending irq=103 Oct 3 03:46:39.393736 (XEN) Pending irq=103 Oct 3 03:46:39.393736 (XEN) Pending irq=103 Oct 3 03:46:39.393736 (XEN) Pending irq=103 Oct 3 03:46:39.405786 (XEN) Pending irq=103 Oct 3 03:46:39.405846 (XEN) Pending irq=103 Oct 3 03:46:39.405889 (XEN) Pending irq=103 Oct 3 03:46:39.405929 (XEN) Pending irq=103 Oct 3 03:46:39.405969 (XEN) Pending irq=103 Oct 3 03:46:39.406009 (XEN) Pending irq=103 Oct 3 03:46:39.417777 (XEN) Pending irq=103 Oct 3 03:46:39.417832 (XEN) Pending irq=103 Oct 3 03:46:39.417874 (XEN) Pending irq=103 Oct 3 03:46:39.417914 (XEN) Pending irq=103 Oct 3 03:46:39.417955 (XEN) Pending irq=103 Oct 3 03:46:39.417994 (XEN) Pending irq=103 Oct 3 03:46:39.429780 (XEN) Pending irq=103 Oct 3 03:46:39.429835 (XEN) Pending irq=103 Oct 3 03:46:39.429876 (XEN) Pending irq=103 Oct 3 03:46:39.429916 (XEN) Pending irq=103 Oct 3 03:46:39.429956 (XEN) Pending irq=103 Oct 3 03:46:39.429996 (XEN) Pending irq=103 Oct 3 03:46:39.441776 (XEN) Pending irq=103 Oct 3 03:46:39.441830 (XEN) Pending irq=103 Oct 3 03:46:39.441872 (XEN) Pending irq=103 Oct 3 03:46:39.441913 (XEN) Pending irq=103 Oct 3 03:46:39.441953 (XEN) Pending irq=103 Oct 3 03:46:39.441994 (XEN) Pending irq=103 Oct 3 03:46:39.453787 (XEN) Pending irq=103 Oct 3 03:46:39.453842 (XEN) Pending irq=103 Oct 3 03:46:39.453884 (XEN) Pending irq=103 Oct 3 03:46:39.453924 (XEN) Pending irq=103 Oct 3 03:46:39.453965 (XEN) Pending irq=103 Oct 3 03:46:39.454005 (XEN) Pending irq=103 Oct 3 03:46:39.465772 (XEN) Pending irq=103 Oct 3 03:46:39.465827 (XEN) Pending irq=103 Oct 3 03:46:39.465869 (XEN) Pending irq=103 Oct 3 03:46:39.465910 (XEN) Pending irq=103 Oct 3 03:46:39.465950 (XEN) Pending irq=103 Oct 3 03:46:39.465990 (XEN) Pending irq=103 Oct 3 03:46:39.477758 (XEN) Pending irq=103 Oct 3 03:46:39.477758 (XEN) Pending irq=103 Oct 3 03:46:39.477758 (XEN) Pending irq=103 Oct 3 03:46:39.477758 (XEN) Pending irq=103 Oct 3 03:46:39.477758 (XEN) Pending irq=103 Oct 3 03:46:39.477758 (XEN) Pending irq=103 Oct 3 03:46:39.489734 (XEN) Pending irq=103 Oct 3 03:46:39.489734 (XEN) Pending irq=103 Oct 3 03:46:39.489734 (XEN) Pending irq=103 Oct 3 03:46:39.489734 (XEN) Pending irq=103 Oct 3 03:46:39.489734 (XEN) Pending irq=103 Oct 3 03:46:39.489734 (XEN) Pending irq=103 Oct 3 03:46:39.501788 (XEN) Pending irq=103 Oct 3 03:46:39.501848 (XEN) Pending irq=103 Oct 3 03:46:39.501890 (XEN) Pending irq=103 Oct 3 03:46:39.501930 (XEN) Pending irq=103 Oct 3 03:46:39.501970 (XEN) Pending irq=103 Oct 3 03:46:39.502010 (XEN) Pending irq=103 Oct 3 03:46:39.513776 (XEN) Pending irq=103 Oct 3 03:46:39.513831 (XEN) Pending irq=103 Oct 3 03:46:39.513873 (XEN) Pending irq=103 Oct 3 03:46:39.513914 (XEN) Pending irq=103 Oct 3 03:46:39.513954 (XEN) Pending irq=103 Oct 3 03:46:39.513994 (XEN) Pending irq=103 Oct 3 03:46:39.525782 (XEN) Pending irq=103 Oct 3 03:46:39.525857 (XEN) Pending irq=103 Oct 3 03:46:39.525902 (XEN) Pending irq=103 Oct 3 03:46:39.525943 (XEN) Pending irq=103 Oct 3 03:46:39.525983 (XEN) Pending irq=103 Oct 3 03:46:39.526023 (XEN) Pending irq=103 Oct 3 03:46:39.537766 (XEN) Pending irq=103 Oct 3 03:46:39.537821 (XEN) Pending irq=103 Oct 3 03:46:39.537863 (XEN) Pending irq=103 Oct 3 03:46:39.537904 (XEN) Pending irq=103 Oct 3 03:46:39.537944 (XEN) Pending irq=103 Oct 3 03:46:39.537985 (XEN) Pending irq=103 Oct 3 03:46:39.549784 (XEN) Pending irq=103 Oct 3 03:46:39.549839 (XEN) Pending irq=103 Oct 3 03:46:39.549881 (XEN) Pending irq=103 Oct 3 03:46:39.549922 (XEN) Pending irq=103 Oct 3 03:46:39.549962 (XEN) Pending irq=103 Oct 3 03:46:39.550002 (XEN) Pending irq=103 Oct 3 03:46:39.561771 (XEN) Pending irq=103 Oct 3 03:46:39.561826 (XEN) Pending irq=103 Oct 3 03:46:39.561868 (XEN) Pending irq=103 Oct 3 03:46:39.561909 (XEN) Pending irq=103 Oct 3 03:46:39.561950 (XEN) Pending irq=103 Oct 3 03:46:39.561990 (XEN) Pending irq=103 Oct 3 03:46:39.573775 (XEN) Pending irq=103 Oct 3 03:46:39.573830 (XEN) Pending irq=103 Oct 3 03:46:39.573872 (XEN) Pending irq=103 Oct 3 03:46:39.573913 (XEN) Pending irq=103 Oct 3 03:46:39.573954 (XEN) Pending irq=103 Oct 3 03:46:39.573994 (XEN) Pending irq=103 Oct 3 03:46:39.585780 (XEN) Pending irq=103 Oct 3 03:46:39.585836 (XEN) Pending irq=103 Oct 3 03:46:39.585878 (XEN) Pending irq=103 Oct 3 03:46:39.585919 (XEN) Pending irq=103 Oct 3 03:46:39.585959 (XEN) Pending irq=103 Oct 3 03:46:39.585999 (XEN) Pending irq=103 Oct 3 03:46:39.597774 (XEN) Pending irq=103 Oct 3 03:46:39.597829 (XEN) Pending irq=103 Oct 3 03:46:39.597871 (XEN) Pending irq=103 Oct 3 03:46:39.597911 (XEN) Pending irq=103 Oct 3 03:46:39.597952 (XEN) Pending irq=103 Oct 3 03:46:39.597992 (XEN) Pending irq=103 Oct 3 03:46:39.609773 (XEN) Pending irq=103 Oct 3 03:46:39.609828 (XEN) Pending irq=103 Oct 3 03:46:39.609870 (XEN) Pending irq=103 Oct 3 03:46:39.609911 (XEN) Pending irq=103 Oct 3 03:46:39.609951 (XEN) Pending irq=103 Oct 3 03:46:39.609991 (XEN) Pending irq=103 Oct 3 03:46:39.621760 (XEN) Pending irq=103 Oct 3 03:46:39.621815 (XEN) Pending irq=103 Oct 3 03:46:39.621857 (XEN) Pending irq=103 Oct 3 03:46:39.621897 (XEN) Pending irq=103 Oct 3 03:46:39.621937 (XEN) Pending irq=103 Oct 3 03:46:39.621976 (XEN) Pending irq=103 Oct 3 03:46:39.633695 (XEN) Pending irq=103 Oct 3 03:46:39.633695 (XEN) Pending irq=103 Oct 3 03:46:39.633695 (XEN) Pending irq=103 Oct 3 03:46:39.633695 (XEN) Pending irq=103 Oct 3 03:46:39.633695 (XEN) Pending irq=103 Oct 3 03:46:39.633695 (XEN) Pending irq=103 Oct 3 03:46:39.645781 (XEN) Pending irq=103 Oct 3 03:46:39.645840 (XEN) Pending irq=103 Oct 3 03:46:39.645883 (XEN) Pending irq=103 Oct 3 03:46:39.645923 (XEN) Pending irq=103 Oct 3 03:46:39.645963 (XEN) Pending irq=103 Oct 3 03:46:39.646003 (XEN) Pending irq=103 Oct 3 03:46:39.657785 (XEN) Pending irq=103 Oct 3 03:46:39.657840 (XEN) Pending irq=103 Oct 3 03:46:39.657882 (XEN) Pending irq=103 Oct 3 03:46:39.657922 (XEN) Pending irq=103 Oct 3 03:46:39.657962 (XEN) Pending irq=103 Oct 3 03:46:39.658002 (XEN) Pending irq=103 Oct 3 03:46:39.669773 (XEN) Pending irq=103 Oct 3 03:46:39.669830 (XEN) Pending irq=103 Oct 3 03:46:39.669872 (XEN) Pending irq=103 Oct 3 03:46:39.669912 (XEN) Pending irq=103 Oct 3 03:46:39.669952 (XEN) Pending irq=103 Oct 3 03:46:39.669992 (XEN) Pending irq=103 Oct 3 03:46:39.681788 (XEN) Pending irq=103 Oct 3 03:46:39.681843 (XEN) Pending irq=103 Oct 3 03:46:39.681885 (XEN) Pending irq=103 Oct 3 03:46:39.681926 (XEN) Pending irq=103 Oct 3 03:46:39.681966 (XEN) Pending irq=103 Oct 3 03:46:39.682006 (XEN) Pending irq=103 Oct 3 03:46:39.693767 (XEN) Pending irq=103 Oct 3 03:46:39.693822 (XEN) Pending irq=103 Oct 3 03:46:39.693865 (XEN) Pending irq=103 Oct 3 03:46:39.693905 (XEN) Pending irq=103 Oct 3 03:46:39.693945 (XEN) Pending irq=103 Oct 3 03:46:39.693985 (XEN) Pending irq=103 Oct 3 03:46:39.705803 (XEN) Pending irq=103 Oct 3 03:46:39.705860 (XEN) Pending irq=103 Oct 3 03:46:39.705902 (XEN) Pending irq=103 Oct 3 03:46:39.705942 (XEN) Pending irq=103 Oct 3 03:46:39.705981 (XEN) Pending irq=103 Oct 3 03:46:39.706021 (XEN) Pending irq=103 Oct 3 03:46:39.717772 (XEN) Pending irq=103 Oct 3 03:46:39.717827 (XEN) Pending irq=103 Oct 3 03:46:39.717869 (XEN) Pending irq=103 Oct 3 03:46:39.717910 (XEN) Pending irq=103 Oct 3 03:46:39.717951 (XEN) Pending irq=103 Oct 3 03:46:39.717990 (XEN) Pending irq=103 Oct 3 03:46:39.729777 (XEN) Pending irq=103 Oct 3 03:46:39.729833 (XEN) Pending irq=103 Oct 3 03:46:39.729875 (XEN) Pending irq=103 Oct 3 03:46:39.729916 (XEN) Pending irq=103 Oct 3 03:46:39.729957 (XEN) Pending irq=103 Oct 3 03:46:39.729997 (XEN) Pending irq=103 Oct 3 03:46:39.741789 (XEN) Pending irq=103 Oct 3 03:46:39.741845 (XEN) Pending irq=103 Oct 3 03:46:39.741887 (XEN) Pending irq=103 Oct 3 03:46:39.741927 (XEN) Pending irq=103 Oct 3 03:46:39.741967 (XEN) Pending irq=103 Oct 3 03:46:39.742006 (XEN) Pending irq=103 Oct 3 03:46:39.753773 (XEN) Pending irq=103 Oct 3 03:46:39.753828 (XEN) Pending irq=103 Oct 3 03:46:39.753870 (XEN) Pending irq=103 Oct 3 03:46:39.753911 (XEN) Pending irq=103 Oct 3 03:46:39.753951 (XEN) Pending irq=103 Oct 3 03:46:39.753991 (XEN) Pending irq=103 Oct 3 03:46:39.765773 (XEN) Pending irq=103 Oct 3 03:46:39.765829 (XEN) Pending irq=103 Oct 3 03:46:39.765870 (XEN) Pending irq=103 Oct 3 03:46:39.765911 (XEN) Pending irq=103 Oct 3 03:46:39.765951 (XEN) Pending irq=103 Oct 3 03:46:39.765991 (XEN) Pending irq=103 Oct 3 03:46:39.777784 (XEN) Pending irq=103 Oct 3 03:46:39.777840 (XEN) Pending irq=103 Oct 3 03:46:39.777882 (XEN) Pending irq=103 Oct 3 03:46:39.777923 (XEN) Pending irq=103 Oct 3 03:46:39.777964 (XEN) Pending irq=103 Oct 3 03:46:39.778004 (XEN) Pending irq=103 Oct 3 03:46:39.789762 (XEN) Pending irq=103 Oct 3 03:46:39.789817 (XEN) Pending irq=103 Oct 3 03:46:39.789859 (XEN) Pending irq=103 Oct 3 03:46:39.789900 (XEN) Pending irq=103 Oct 3 03:46:39.789940 (XEN) Pending irq=103 Oct 3 03:46:39.789980 (XEN) Pending irq=103 Oct 3 03:46:39.801789 (XEN) Pending irq=103 Oct 3 03:46:39.801844 (XEN) Pending irq=103 Oct 3 03:46:39.801886 (XEN) Pending irq=103 Oct 3 03:46:39.801927 (XEN) Pending irq=103 Oct 3 03:46:39.801968 (XEN) Pending irq=103 Oct 3 03:46:39.802008 (XEN) Pending irq=103 Oct 3 03:46:39.813677 (XEN) Pending irq=103 Oct 3 03:46:39.813707 (XEN) Pending irq=103 Oct 3 03:46:39.813730 (XEN) Pending irq=103 Oct 3 03:46:39.813752 (XEN) Pending irq=103 Oct 3 03:46:39.813774 (XEN) Pending irq=103 Oct 3 03:46:39.813796 (XEN) Pending irq=103 Oct 3 03:46:39.825772 (XEN) Pending irq=103 Oct 3 03:46:39.825828 (XEN) Pending irq=103 Oct 3 03:46:39.825870 (XEN) Pending irq=103 Oct 3 03:46:39.825910 (XEN) Pending irq=103 Oct 3 03:46:39.825950 (XEN) Pending irq=103 Oct 3 03:46:39.825990 (XEN) Pending irq=103 Oct 3 03:46:39.837784 (XEN) Pending irq=103 Oct 3 03:46:39.837839 (XEN) Pending irq=103 Oct 3 03:46:39.837881 (XEN) Pending irq=103 Oct 3 03:46:39.837921 (XEN) Pending irq=103 Oct 3 03:46:39.837961 (XEN) Pending irq=103 Oct 3 03:46:39.838001 (XEN) Pending irq=103 Oct 3 03:46:39.849772 (XEN) Pending irq=103 Oct 3 03:46:39.849827 (XEN) Pending irq=103 Oct 3 03:46:39.849870 (XEN) Pending irq=103 Oct 3 03:46:39.849911 (XEN) Pending irq=103 Oct 3 03:46:39.849951 (XEN) Pending irq=103 Oct 3 03:46:39.849992 (XEN) Pending irq=103 Oct 3 03:46:39.861776 (XEN) Pending irq=103 Oct 3 03:46:39.861832 (XEN) Pending irq=103 Oct 3 03:46:39.861874 (XEN) Pending irq=103 Oct 3 03:46:39.861915 (XEN) Pending irq=103 Oct 3 03:46:39.861955 (XEN) Pending irq=103 Oct 3 03:46:39.861995 (XEN) Pending irq=103 Oct 3 03:46:39.873777 (XEN) Pending irq=103 Oct 3 03:46:39.873832 (XEN) Pending irq=103 Oct 3 03:46:39.873874 (XEN) Pending irq=103 Oct 3 03:46:39.873914 (XEN) Pending irq=103 Oct 3 03:46:39.873955 (XEN) Pending irq=103 Oct 3 03:46:39.874015 (XEN) Pending irq=103 Oct 3 03:46:39.885782 (XEN) Pending irq=103 Oct 3 03:46:39.885837 (XEN) Pending irq=103 Oct 3 03:46:39.885879 (XEN) Pending irq=103 Oct 3 03:46:39.885919 (XEN) Pending irq=103 Oct 3 03:46:39.885960 (XEN) Pending irq=103 Oct 3 03:46:39.886000 (XEN) Pending irq=103 Oct 3 03:46:39.897768 (XEN) Pending irq=103 Oct 3 03:46:39.897823 (XEN) Pending irq=103 Oct 3 03:46:39.897865 (XEN) Pending irq=103 Oct 3 03:46:39.897905 (XEN) Pending irq=103 Oct 3 03:46:39.897945 (XEN) Pending irq=103 Oct 3 03:46:39.897986 (XEN) Pending irq=103 Oct 3 03:46:39.909778 (XEN) Pending irq=103 Oct 3 03:46:39.909833 (XEN) Pending irq=103 Oct 3 03:46:39.909876 (XEN) Pending irq=103 Oct 3 03:46:39.909916 (XEN) Pending irq=103 Oct 3 03:46:39.909956 (XEN) Pending irq=103 Oct 3 03:46:39.909997 (XEN) Pending irq=103 Oct 3 03:46:39.921781 (XEN) Pending irq=103 Oct 3 03:46:39.921836 (XEN) Pending irq=103 Oct 3 03:46:39.921878 (XEN) Pending irq=103 Oct 3 03:46:39.921919 (XEN) Pending irq=103 Oct 3 03:46:39.921960 (XEN) Pending irq=103 Oct 3 03:46:39.922000 (XEN) Pending irq=103 Oct 3 03:46:39.933778 (XEN) Pending irq=103 Oct 3 03:46:39.933834 (XEN) Pending irq=103 Oct 3 03:46:39.933877 (XEN) Pending irq=103 Oct 3 03:46:39.933918 (XEN) Pending irq=103 Oct 3 03:46:39.933958 (XEN) Pending irq=103 Oct 3 03:46:39.933998 (XEN) Pending irq=103 Oct 3 03:46:39.945781 (XEN) Pending irq=103 Oct 3 03:46:39.945837 (XEN) Pending irq=103 Oct 3 03:46:39.945880 (XEN) Pending irq=103 Oct 3 03:46:39.945920 (XEN) Pending irq=103 Oct 3 03:46:39.945961 (XEN) Pending irq=103 Oct 3 03:46:39.946001 (XEN) Pending irq=103 Oct 3 03:46:39.957770 (XEN) Pending irq=103 Oct 3 03:46:39.957825 (XEN) Pending irq=103 Oct 3 03:46:39.957867 (XEN) Pending irq=103 Oct 3 03:46:39.957908 (XEN) Pending irq=103 Oct 3 03:46:39.957949 (XEN) Pending irq=103 Oct 3 03:46:39.957990 (XEN) Pending irq=103 Oct 3 03:46:39.969780 (XEN) Pending irq=103 Oct 3 03:46:39.969835 (XEN) Pending irq=103 Oct 3 03:46:39.969877 (XEN) Pending irq=103 Oct 3 03:46:39.969917 (XEN) Pending irq=103 Oct 3 03:46:39.969957 (XEN) Pending irq=103 Oct 3 03:46:39.969996 (XEN) Pending irq=103 Oct 3 03:46:39.981786 (XEN) Pending irq=103 Oct 3 03:46:39.981842 (XEN) Pending irq=103 Oct 3 03:46:39.981884 (XEN) Pending irq=103 Oct 3 03:46:39.981924 (XEN) Pending irq=103 Oct 3 03:46:39.981964 (XEN) Pending irq=103 Oct 3 03:46:39.982004 (XEN) Pending irq=103 Oct 3 03:46:39.993779 (XEN) Pending irq=103 Oct 3 03:46:39.993835 (XEN) Pending irq=103 Oct 3 03:46:39.993877 (XEN) Pending irq=103 Oct 3 03:46:39.993918 (XEN) Pending irq=103 Oct 3 03:46:39.993959 (XEN) Pending irq=103 Oct 3 03:46:39.993999 (XEN) Pending irq=103 Oct 3 03:46:40.005755 (XEN) Pending irq=103 Oct 3 03:46:40.005810 (XEN) Pending irq=103 Oct 3 03:46:40.005852 (XEN) Pending irq=103 Oct 3 03:46:40.005893 (XEN) Pending irq=103 Oct 3 03:46:40.005933 (XEN) Pending irq=103 Oct 3 03:46:40.005973 (XEN) Pending irq=103 Oct 3 03:46:40.017771 (XEN) Pending irq=103 Oct 3 03:46:40.017827 (XEN) Pending irq=103 Oct 3 03:46:40.017869 (XEN) Pending irq=103 Oct 3 03:46:40.017910 (XEN) Pending irq=103 Oct 3 03:46:40.017950 (XEN) Pending irq=103 Oct 3 03:46:40.017990 (XEN) Pending irq=103 Oct 3 03:46:40.029782 (XEN) Pending irq=103 Oct 3 03:46:40.029838 (XEN) Pending irq=103 Oct 3 03:46:40.029880 (XEN) Pending irq=103 Oct 3 03:46:40.029920 (XEN) Pending irq=103 Oct 3 03:46:40.029961 (XEN) Pending irq=103 Oct 3 03:46:40.030002 (XEN) Pending irq=103 Oct 3 03:46:40.041753 (XEN) Pending irq=103 Oct 3 03:46:40.041753 (XEN) Pending irq=103 Oct 3 03:46:40.041753 (XEN) Pending irq=103 Oct 3 03:46:40.041753 (XEN) Pending irq=103 Oct 3 03:46:40.041753 (XEN) Pending irq=103 Oct 3 03:46:40.041753 (XEN) Pending irq=103 Oct 3 03:46:40.053793 (XEN) Pending irq=103 Oct 3 03:46:40.053854 (XEN) Pending irq=103 Oct 3 03:46:40.053896 (XEN) Pending irq=103 Oct 3 03:46:40.053936 (XEN) Pending irq=103 Oct 3 03:46:40.053996 (XEN) Pending irq=103 Oct 3 03:46:40.054039 (XEN) Pending irq=103 Oct 3 03:46:40.065730 (XEN) Pending irq=103 Oct 3 03:46:40.065730 (XEN) Pending irq=103 Oct 3 03:46:40.065730 (XEN) Pending irq=103 Oct 3 03:46:40.065730 (XEN) Pending irq=103 Oct 3 03:46:40.065730 (XEN) Pending irq=103 Oct 3 03:46:40.065730 (XEN) Pending irq=103 Oct 3 03:46:40.077766 (XEN) Pending irq=103 Oct 3 03:46:40.077826 (XEN) Pending irq=103 Oct 3 03:46:40.077868 (XEN) Pending irq=103 Oct 3 03:46:40.077908 (XEN) Pending irq=103 Oct 3 03:46:40.077948 (XEN) Pending irq=103 Oct 3 03:46:40.077988 (XEN) Pending irq=103 Oct 3 03:46:40.089769 (XEN) Pending irq=103 Oct 3 03:46:40.089824 (XEN) Pending irq=103 Oct 3 03:46:40.089866 (XEN) Pending irq=103 Oct 3 03:46:40.089907 (XEN) Pending irq=103 Oct 3 03:46:40.089946 (XEN) Pending irq=103 Oct 3 03:46:40.089986 (XEN) Pending irq=103 Oct 3 03:46:40.101778 (XEN) Pending irq=103 Oct 3 03:46:40.101833 (XEN) Pending irq=103 Oct 3 03:46:40.101876 (XEN) Pending irq=103 Oct 3 03:46:40.101917 (XEN) Pending irq=103 Oct 3 03:46:40.101958 (XEN) Pending irq=103 Oct 3 03:46:40.101998 (XEN) Pending irq=103 Oct 3 03:46:40.113773 (XEN) Pending irq=103 Oct 3 03:46:40.113829 (XEN) Pending irq=103 Oct 3 03:46:40.113871 (XEN) Pending irq=103 Oct 3 03:46:40.113912 (XEN) Pending irq=103 Oct 3 03:46:40.113953 (XEN) Pending irq=103 Oct 3 03:46:40.113993 (XEN) Pending irq=103 Oct 3 03:46:40.125770 (XEN) Pending irq=103 Oct 3 03:46:40.125826 (XEN) Pending irq=103 Oct 3 03:46:40.125868 (XEN) Pending irq=103 Oct 3 03:46:40.125909 (XEN) Pending irq=103 Oct 3 03:46:40.125950 (XEN) Pending irq=103 Oct 3 03:46:40.125990 (XEN) Pending irq=103 Oct 3 03:46:40.137761 (XEN) Pending irq=103 Oct 3 03:46:40.137816 (XEN) Pending irq=103 Oct 3 03:46:40.137858 (XEN) Pending irq=103 Oct 3 03:46:40.137899 (XEN) Pending irq=103 Oct 3 03:46:40.137938 (XEN) Pending irq=103 Oct 3 03:46:40.137978 (XEN) Pending irq=103 Oct 3 03:46:40.149769 (XEN) Pending irq=103 Oct 3 03:46:40.149825 (XEN) Pending irq=103 Oct 3 03:46:40.149867 (XEN) Pending irq=103 Oct 3 03:46:40.149907 (XEN) Pending irq=103 Oct 3 03:46:40.149948 (XEN) Pending irq=103 Oct 3 03:46:40.149988 (XEN) Pending irq=103 Oct 3 03:46:40.161787 (XEN) Pending irq=103 Oct 3 03:46:40.161843 (XEN) Pending irq=103 Oct 3 03:46:40.161885 (XEN) Pending irq=103 Oct 3 03:46:40.161926 (XEN) Pending irq=103 Oct 3 03:46:40.161967 (XEN) Pending irq=103 Oct 3 03:46:40.162007 (XEN) Pending irq=103 Oct 3 03:46:40.173728 (XEN) Pending irq=103 Oct 3 03:46:40.173728 (XEN) Pending irq=103 Oct 3 03:46:40.173728 (XEN) Pending irq=103 Oct 3 03:46:40.173728 (XEN) Pending irq=103 Oct 3 03:46:40.173728 (XEN) Pending irq=103 Oct 3 03:46:40.173728 (XEN) Pending irq=103 Oct 3 03:46:40.185782 (XEN) Pending irq=103 Oct 3 03:46:40.185843 (XEN) Pending irq=103 Oct 3 03:46:40.185885 (XEN) Pending irq=103 Oct 3 03:46:40.185927 (XEN) Pending irq=103 Oct 3 03:46:40.185967 (XEN) Pending irq=103 Oct 3 03:46:40.186008 (XEN) Pending irq=103 Oct 3 03:46:40.197774 (XEN) Pending irq=103 Oct 3 03:46:40.197830 (XEN) Pending irq=103 Oct 3 03:46:40.197872 (XEN) Pending irq=103 Oct 3 03:46:40.197913 (XEN) Pending irq=103 Oct 3 03:46:40.197953 (XEN) Pending irq=103 Oct 3 03:46:40.197993 (XEN) Pending irq=103 Oct 3 03:46:40.209780 (XEN) Pending irq=103 Oct 3 03:46:40.209836 (XEN) Pending irq=103 Oct 3 03:46:40.209877 (XEN) Pending irq=103 Oct 3 03:46:40.209918 (XEN) Pending irq=103 Oct 3 03:46:40.209959 (XEN) Pending irq=103 Oct 3 03:46:40.210000 (XEN) Pending irq=103 Oct 3 03:46:40.221776 (XEN) Pending irq=103 Oct 3 03:46:40.221831 (XEN) Pending irq=103 Oct 3 03:46:40.221874 (XEN) Pending irq=103 Oct 3 03:46:40.221914 (XEN) Pending irq=103 Oct 3 03:46:40.221954 (XEN) Pending irq=103 Oct 3 03:46:40.221994 (XEN) Pending irq=103 Oct 3 03:46:40.233777 (XEN) Pending irq=103 Oct 3 03:46:40.233833 (XEN) Pending irq=103 Oct 3 03:46:40.233875 (XEN) Pending irq=103 Oct 3 03:46:40.233916 (XEN) Pending irq=103 Oct 3 03:46:40.233983 (XEN) Pending irq=103 Oct 3 03:46:40.234027 (XEN) Pending irq=103 Oct 3 03:46:40.245774 (XEN) Pending irq=103 Oct 3 03:46:40.245830 (XEN) Pending irq=103 Oct 3 03:46:40.245873 (XEN) Pending irq=103 Oct 3 03:46:40.245914 (XEN) Pending irq=103 Oct 3 03:46:40.245955 (XEN) Pending irq=103 Oct 3 03:46:40.245995 (XEN) Pending irq=103 Oct 3 03:46:40.257778 (XEN) Pending irq=103 Oct 3 03:46:40.257834 (XEN) Pending irq=103 Oct 3 03:46:40.257876 (XEN) Pending irq=103 Oct 3 03:46:40.257917 (XEN) Pending irq=103 Oct 3 03:46:40.257958 (XEN) Pending irq=103 Oct 3 03:46:40.257998 (XEN) Pending irq=103 Oct 3 03:46:40.269738 (XEN) Pending irq=103 Oct 3 03:46:40.269738 (XEN) Pending irq=103 Oct 3 03:46:40.269738 (XEN) Pending irq=103 Oct 3 03:46:40.269738 (XEN) Pending irq=103 Oct 3 03:46:40.269738 (XEN) Pending irq=103 Oct 3 03:46:40.269738 (XEN) Pending irq=103 Oct 3 03:46:40.281800 (XEN) Pending irq=103 Oct 3 03:46:40.281862 (XEN) Pending irq=103 Oct 3 03:46:40.281905 (XEN) Pending irq=103 Oct 3 03:46:40.281945 (XEN) Pending irq=103 Oct 3 03:46:40.281984 (XEN) Pending irq=103 Oct 3 03:46:40.282024 (XEN) Pending irq=103 Oct 3 03:46:40.293727 (XEN) Pending irq=103 Oct 3 03:46:40.293727 (XEN) Pending irq=103 Oct 3 03:46:40.293727 (XEN) Pending irq=103 Oct 3 03:46:40.293727 (XEN) Pending irq=103 Oct 3 03:46:40.293727 (XEN) Pending irq=103 Oct 3 03:46:40.293727 (XEN) Pending irq=103 Oct 3 03:46:40.305791 (XEN) Pending irq=103 Oct 3 03:46:40.305850 (XEN) Pending irq=103 Oct 3 03:46:40.305892 (XEN) Pending irq=103 Oct 3 03:46:40.305932 (XEN) Pending irq=103 Oct 3 03:46:40.305972 (XEN) Pending irq=103 Oct 3 03:46:40.306013 (XEN) Pending irq=103 Oct 3 03:46:40.317783 (XEN) Pending irq=103 Oct 3 03:46:40.317839 (XEN) Pending irq=103 Oct 3 03:46:40.317882 (XEN) Pending irq=103 Oct 3 03:46:40.317923 (XEN) Pending irq=103 Oct 3 03:46:40.317963 (XEN) Pending irq=103 Oct 3 03:46:40.318003 (XEN) Pending irq=103 Oct 3 03:46:40.329751 (XEN) Pending irq=103 Oct 3 03:46:40.329807 (XEN) Pending irq=103 Oct 3 03:46:40.329849 (XEN) Pending irq=103 Oct 3 03:46:40.329889 (XEN) Pending irq=103 Oct 3 03:46:40.329929 (XEN) Pending irq=103 Oct 3 03:46:40.329969 (XEN) Pending irq=103 Oct 3 03:46:40.341772 (XEN) Pending irq=103 Oct 3 03:46:40.341828 (XEN) Pending irq=103 Oct 3 03:46:40.341870 (XEN) Pending irq=103 Oct 3 03:46:40.341911 (XEN) Pending irq=103 Oct 3 03:46:40.341950 (XEN) Pending irq=103 Oct 3 03:46:40.341990 (XEN) Pending irq=103 Oct 3 03:46:40.353768 (XEN) Pending irq=103 Oct 3 03:46:40.353824 (XEN) Pending irq=103 Oct 3 03:46:40.353867 (XEN) Pending irq=103 Oct 3 03:46:40.353908 (XEN) Pending irq=103 Oct 3 03:46:40.353948 (XEN) Pending irq=103 Oct 3 03:46:40.353988 (XEN) Pending irq=103 Oct 3 03:46:40.365728 (XEN) Pending irq=103 Oct 3 03:46:40.365728 (XEN) Pending irq=103 Oct 3 03:46:40.365728 (XEN) Pending irq=103 Oct 3 03:46:40.365728 (XEN) Pending irq=103 Oct 3 03:46:40.365728 (XEN) Pending irq=103 Oct 3 03:46:40.365728 (XEN) Pending irq=103 Oct 3 03:46:40.377777 (XEN) Pending irq=103 Oct 3 03:46:40.377838 (XEN) Pending irq=103 Oct 3 03:46:40.377880 (XEN) Pending irq=103 Oct 3 03:46:40.377921 (XEN) Pending irq=103 Oct 3 03:46:40.377962 (XEN) Pending irq=103 Oct 3 03:46:40.378001 (XEN) Pending irq=103 Oct 3 03:46:40.389777 (XEN) Pending irq=103 Oct 3 03:46:40.389834 (XEN) Pending irq=103 Oct 3 03:46:40.389876 (XEN) Pending irq=103 Oct 3 03:46:40.389917 (XEN) Pending irq=103 Oct 3 03:46:40.389958 (XEN) Pending irq=103 Oct 3 03:46:40.389998 (XEN) Pending irq=103 Oct 3 03:46:40.401721 (XEN) Pending irq=103 Oct 3 03:46:40.401777 (XEN) Pending irq=103 Oct 3 03:46:40.401820 (XEN) Pending irq=103 Oct 3 03:46:40.401860 (XEN) Pending irq=103 Oct 3 03:46:40.401900 (XEN) Pending irq=103 Oct 3 03:46:40.401940 (XEN) Pending irq=103 Oct 3 03:46:40.413776 (XEN) Pending irq=103 Oct 3 03:46:40.413833 (XEN) Pending irq=103 Oct 3 03:46:40.413876 (XEN) Pending irq=103 Oct 3 03:46:40.413936 (XEN) Pending irq=103 Oct 3 03:46:40.413980 (XEN) Pending irq=103 Oct 3 03:46:40.414020 (XEN) Pending irq=103 Oct 3 03:46:40.414061 (XEN) Pending irq=103 Oct 3 03:46:40.425787 (XEN) Pending irq=103 Oct 3 03:46:40.425841 (XEN) Pending irq=103 Oct 3 03:46:40.425884 (XEN) Pending irq=103 Oct 3 03:46:40.425924 (XEN) Pending irq=103 Oct 3 03:46:40.425965 (XEN) Pending irq=103 Oct 3 03:46:40.426006 (XEN) Pending irq=103 Oct 3 03:46:40.437765 (XEN) Pending irq=103 Oct 3 03:46:40.437820 (XEN) Pending irq=103 Oct 3 03:46:40.437862 (XEN) Pending irq=103 Oct 3 03:46:40.437902 (XEN) Pending irq=103 Oct 3 03:46:40.437943 (XEN) Pending irq=103 Oct 3 03:46:40.437983 (XEN) Pending irq=103 Oct 3 03:46:40.449785 (XEN) Pending irq=103 Oct 3 03:46:40.449840 (XEN) Pending irq=103 Oct 3 03:46:40.449882 (XEN) Pending irq=103 Oct 3 03:46:40.449922 (XEN) Pending irq=103 Oct 3 03:46:40.449962 (XEN) Pending irq=103 Oct 3 03:46:40.450003 (XEN) Pending irq=103 Oct 3 03:46:40.461780 (XEN) Pending irq=103 Oct 3 03:46:40.461834 (XEN) Pending irq=103 Oct 3 03:46:40.461876 (XEN) Pending irq=103 Oct 3 03:46:40.461917 (XEN) Pending irq=103 Oct 3 03:46:40.461957 (XEN) Pending irq=103 Oct 3 03:46:40.461997 (XEN) Pending irq=103 Oct 3 03:46:40.473770 (XEN) Pending irq=103 Oct 3 03:46:40.473826 (XEN) Pending irq=103 Oct 3 03:46:40.473867 (XEN) Pending irq=103 Oct 3 03:46:40.473908 (XEN) Pending irq=103 Oct 3 03:46:40.473947 (XEN) Pending irq=103 Oct 3 03:46:40.473987 (XEN) Pending irq=103 Oct 3 03:46:40.485783 (XEN) Pending irq=103 Oct 3 03:46:40.485838 (XEN) Pending irq=103 Oct 3 03:46:40.485879 (XEN) Pending irq=103 Oct 3 03:46:40.485919 (XEN) Pending irq=103 Oct 3 03:46:40.485960 (XEN) Pending irq=103 Oct 3 03:46:40.486000 (XEN) Pending irq=103 Oct 3 03:46:40.497782 (XEN) Pending irq=103 Oct 3 03:46:40.497836 (XEN) Pending irq=103 Oct 3 03:46:40.497878 (XEN) Pending irq=103 Oct 3 03:46:40.497919 (XEN) Pending irq=103 Oct 3 03:46:40.497959 (XEN) Pending irq=103 Oct 3 03:46:40.497999 (XEN) Pending irq=103 Oct 3 03:46:40.509782 (XEN) Pending irq=103 Oct 3 03:46:40.509836 (XEN) Pending irq=103 Oct 3 03:46:40.509878 (XEN) Pending irq=103 Oct 3 03:46:40.509919 (XEN) Pending irq=103 Oct 3 03:46:40.509959 (XEN) Pending irq=103 Oct 3 03:46:40.509999 (XEN) Pending irq=103 Oct 3 03:46:40.521772 (XEN) Pending irq=103 Oct 3 03:46:40.521827 (XEN) Pending irq=103 Oct 3 03:46:40.521868 (XEN) Pending irq=103 Oct 3 03:46:40.521909 (XEN) Pending irq=103 Oct 3 03:46:40.521949 (XEN) Pending irq=103 Oct 3 03:46:40.521989 (XEN) Pending irq=103 Oct 3 03:46:40.533775 (XEN) Pending irq=103 Oct 3 03:46:40.533830 (XEN) Pending irq=103 Oct 3 03:46:40.533872 (XEN) Pending irq=103 Oct 3 03:46:40.533914 (XEN) Pending irq=103 Oct 3 03:46:40.533954 (XEN) Pending irq=103 Oct 3 03:46:40.533994 (XEN) Pending irq=103 Oct 3 03:46:40.545759 (XEN) Pending irq=103 Oct 3 03:46:40.545813 (XEN) Pending irq=103 Oct 3 03:46:40.545855 (XEN) Pending irq=103 Oct 3 03:46:40.545895 (XEN) Pending irq=103 Oct 3 03:46:40.545935 (XEN) Pending irq=103 Oct 3 03:46:40.545975 (XEN) Pending irq=103 Oct 3 03:46:40.557778 (XEN) Pending irq=103 Oct 3 03:46:40.557833 (XEN) Pending irq=103 Oct 3 03:46:40.557874 (XEN) Pending irq=103 Oct 3 03:46:40.557915 (XEN) Pending irq=103 Oct 3 03:46:40.557955 (XEN) Pending irq=103 Oct 3 03:46:40.557995 (XEN) Pending irq=103 Oct 3 03:46:40.569779 (XEN) Pending irq=103 Oct 3 03:46:40.569834 (XEN) Pending irq=103 Oct 3 03:46:40.569875 (XEN) Pending irq=103 Oct 3 03:46:40.569916 (XEN) Pending irq=103 Oct 3 03:46:40.569956 (XEN) Pending irq=103 Oct 3 03:46:40.569997 (XEN) Pending irq=103 Oct 3 03:46:40.581788 (XEN) Pending irq=103 Oct 3 03:46:40.581843 (XEN) Pending irq=103 Oct 3 03:46:40.581886 (XEN) Pending irq=103 Oct 3 03:46:40.581927 (XEN) Pending irq=103 Oct 3 03:46:40.581967 (XEN) Pending irq=103 Oct 3 03:46:40.582007 (XEN) Pending irq=103 Oct 3 03:46:40.593783 (XEN) Pending irq=103 Oct 3 03:46:40.593856 (XEN) Pending irq=103 Oct 3 03:46:40.593901 (XEN) Pending irq=103 Oct 3 03:46:40.593942 (XEN) Pending irq=103 Oct 3 03:46:40.593982 (XEN) Pending irq=103 Oct 3 03:46:40.594023 (XEN) Pending irq=103 Oct 3 03:46:40.605771 (XEN) Pending irq=103 Oct 3 03:46:40.605826 (XEN) Pending irq=103 Oct 3 03:46:40.605868 (XEN) Pending irq=103 Oct 3 03:46:40.605909 (XEN) Pending irq=103 Oct 3 03:46:40.605949 (XEN) Pending irq=103 Oct 3 03:46:40.605989 (XEN) Pending irq=103 Oct 3 03:46:40.617770 (XEN) Pending irq=103 Oct 3 03:46:40.617825 (XEN) Pending irq=103 Oct 3 03:46:40.617867 (XEN) Pending irq=103 Oct 3 03:46:40.617907 (XEN) Pending irq=103 Oct 3 03:46:40.617947 (XEN) Pending irq=103 Oct 3 03:46:40.617987 (XEN) Pending irq=103 Oct 3 03:46:40.629776 (XEN) Pending irq=103 Oct 3 03:46:40.629831 (XEN) Pending irq=103 Oct 3 03:46:40.629872 (XEN) Pending irq=103 Oct 3 03:46:40.629913 (XEN) Pending irq=103 Oct 3 03:46:40.629953 (XEN) Pending irq=103 Oct 3 03:46:40.629994 (XEN) Pending irq=103 Oct 3 03:46:40.641791 (XEN) Pending irq=103 Oct 3 03:46:40.641846 (XEN) Pending irq=103 Oct 3 03:46:40.641888 (XEN) Pending irq=103 Oct 3 03:46:40.641929 (XEN) Pending irq=103 Oct 3 03:46:40.641969 (XEN) Pending irq=103 Oct 3 03:46:40.642009 (XEN) Pending irq=103 Oct 3 03:46:40.653785 (XEN) Pending irq=103 Oct 3 03:46:40.653840 (XEN) Pending irq=103 Oct 3 03:46:40.653883 (XEN) Pending irq=103 Oct 3 03:46:40.653923 (XEN) Pending irq=103 Oct 3 03:46:40.653963 (XEN) Pending irq=103 Oct 3 03:46:40.654003 (XEN) Pending irq=103 Oct 3 03:46:40.665740 (XEN) Pending irq=103 Oct 3 03:46:40.665788 (XEN) Pending irq=103 Oct 3 03:46:40.665829 (XEN) Pending irq=103 Oct 3 03:46:40.665869 (XEN) Pending irq=103 Oct 3 03:46:40.665910 (XEN) Pending irq=103 Oct 3 03:46:40.665950 (XEN) Pending irq=103 Oct 3 03:46:40.677787 (XEN) Pending irq=103 Oct 3 03:46:40.677842 (XEN) Pending irq=103 Oct 3 03:46:40.677883 (XEN) Pending irq=103 Oct 3 03:46:40.677924 (XEN) Pending irq=103 Oct 3 03:46:40.677964 (XEN) Pending irq=103 Oct 3 03:46:40.678004 (XEN) Pending irq=103 Oct 3 03:46:40.689767 (XEN) Pending irq=103 Oct 3 03:46:40.689822 (XEN) Pending irq=103 Oct 3 03:46:40.689864 (XEN) Pending irq=103 Oct 3 03:46:40.689904 (XEN) Pending irq=103 Oct 3 03:46:40.689944 (XEN) Pending irq=103 Oct 3 03:46:40.689984 (XEN) Pending irq=103 Oct 3 03:46:40.701783 (XEN) Pending irq=103 Oct 3 03:46:40.701875 (XEN) Pending irq=103 Oct 3 03:46:40.701921 (XEN) Pending irq=103 Oct 3 03:46:40.701963 (XEN) Pending irq=103 Oct 3 03:46:40.702003 (XEN) Pending irq=103 Oct 3 03:46:40.702043 (XEN) Pending irq=103 Oct 3 03:46:40.713771 (XEN) Pending irq=103 Oct 3 03:46:40.713826 (XEN) Pending irq=103 Oct 3 03:46:40.713867 (XEN) Pending irq=103 Oct 3 03:46:40.713908 (XEN) Pending irq=103 Oct 3 03:46:40.713948 (XEN) Pending irq=103 Oct 3 03:46:40.713988 (XEN) Pending irq=103 Oct 3 03:46:40.725777 (XEN) Pending irq=103 Oct 3 03:46:40.725832 (XEN) Pending irq=103 Oct 3 03:46:40.725875 (XEN) Pending irq=103 Oct 3 03:46:40.725915 (XEN) Pending irq=103 Oct 3 03:46:40.725956 (XEN) Pending irq=103 Oct 3 03:46:40.725995 (XEN) Pending irq=103 Oct 3 03:46:40.737814 (XEN) Pending irq=103 Oct 3 03:46:40.737869 (XEN) Pending irq=103 Oct 3 03:46:40.737912 (XEN) Pending irq=103 Oct 3 03:46:40.737953 (XEN) Pending irq=103 Oct 3 03:46:40.737993 (XEN) Pending irq=103 Oct 3 03:46:40.738034 (XEN) Pending irq=103 Oct 3 03:46:40.749773 (XEN) Pending irq=103 Oct 3 03:46:40.749832 (XEN) Pending irq=103 Oct 3 03:46:40.749878 (XEN) Pending irq=103 Oct 3 03:46:40.749919 (XEN) Pending irq=103 Oct 3 03:46:40.749959 (XEN) Pending irq=103 Oct 3 03:46:40.750000 (XEN) Pending irq=103 Oct 3 03:46:40.761784 (XEN) Pending irq=103 Oct 3 03:46:40.761839 (XEN) Pending irq=103 Oct 3 03:46:40.761881 (XEN) Pending irq=103 Oct 3 03:46:40.761922 (XEN) Pending irq=103 Oct 3 03:46:40.761963 (XEN) Pending irq=103 Oct 3 03:46:40.762003 (XEN) Pending irq=103 Oct 3 03:46:40.773779 (XEN) Pending irq=103 Oct 3 03:46:40.773835 (XEN) Pending irq=103 Oct 3 03:46:40.773877 (XEN) Pending irq=103 Oct 3 03:46:40.773918 (XEN) Pending irq=103 Oct 3 03:46:40.773957 (XEN) Pending irq=103 Oct 3 03:46:40.773997 (XEN) Pending irq=103 Oct 3 03:46:40.785771 (XEN) Pending irq=103 Oct 3 03:46:40.785826 (XEN) Pending irq=103 Oct 3 03:46:40.785868 (XEN) Pending irq=103 Oct 3 03:46:40.785909 (XEN) Pending irq=103 Oct 3 03:46:40.785949 (XEN) Pending irq=103 Oct 3 03:46:40.785989 (XEN) Pending irq=103 Oct 3 03:46:40.797778 (XEN) Pending irq=103 Oct 3 03:46:40.797833 (XEN) Pending irq=103 Oct 3 03:46:40.797875 (XEN) Pending irq=103 Oct 3 03:46:40.797916 (XEN) Pending irq=103 Oct 3 03:46:40.797956 (XEN) Pending irq=103 Oct 3 03:46:40.797997 (XEN) Pending irq=103 Oct 3 03:46:40.809782 (XEN) Pending irq=103 Oct 3 03:46:40.809837 (XEN) Pending irq=103 Oct 3 03:46:40.809879 (XEN) Pending irq=103 Oct 3 03:46:40.809920 (XEN) Pending irq=103 Oct 3 03:46:40.809960 (XEN) Pending irq=103 Oct 3 03:46:40.810001 (XEN) Pending irq=103 Oct 3 03:46:40.821777 (XEN) Pending irq=103 Oct 3 03:46:40.821833 (XEN) Pending irq=103 Oct 3 03:46:40.821875 (XEN) Pending irq=103 Oct 3 03:46:40.821916 (XEN) Pending irq=103 Oct 3 03:46:40.821956 (XEN) Pending irq=103 Oct 3 03:46:40.821997 (XEN) Pending irq=103 Oct 3 03:46:40.833748 (XEN) Pending irq=103 Oct 3 03:46:40.833803 (XEN) Pending irq=103 Oct 3 03:46:40.833844 (XEN) Pending irq=103 Oct 3 03:46:40.833885 (XEN) Pending irq=103 Oct 3 03:46:40.833924 (XEN) Pending irq=103 Oct 3 03:46:40.833964 (XEN) Pending irq=103 Oct 3 03:46:40.845772 (XEN) Pending irq=103 Oct 3 03:46:40.845827 (XEN) Pending irq=103 Oct 3 03:46:40.845869 (XEN) Pending irq=103 Oct 3 03:46:40.845909 (XEN) Pending irq=103 Oct 3 03:46:40.845950 (XEN) Pending irq=103 Oct 3 03:46:40.845990 (XEN) Pending irq=103 Oct 3 03:46:40.857767 (XEN) Pending irq=103 Oct 3 03:46:40.857822 (XEN) Pending irq=103 Oct 3 03:46:40.857864 (XEN) Pending irq=103 Oct 3 03:46:40.857905 (XEN) Pending irq=103 Oct 3 03:46:40.857946 (XEN) Pending irq=103 Oct 3 03:46:40.857987 (XEN) Pending irq=103 Oct 3 03:46:40.869738 (XEN) Pending irq=103 Oct 3 03:46:40.869793 (XEN) Pending irq=103 Oct 3 03:46:40.869836 (XEN) Pending irq=103 Oct 3 03:46:40.869876 (XEN) Pending irq=103 Oct 3 03:46:40.869916 (XEN) Pending irq=103 Oct 3 03:46:40.869956 (XEN) Pending irq=103 Oct 3 03:46:40.881780 (XEN) Pending irq=103 Oct 3 03:46:40.881836 (XEN) Pending irq=103 Oct 3 03:46:40.881878 (XEN) Pending irq=103 Oct 3 03:46:40.881919 (XEN) Pending irq=103 Oct 3 03:46:40.881959 (XEN) Pending irq=103 Oct 3 03:46:40.882000 (XEN) Pending irq=103 Oct 3 03:46:40.893774 (XEN) Pending irq=103 Oct 3 03:46:40.893829 (XEN) Pending irq=103 Oct 3 03:46:40.893871 (XEN) Pending irq=103 Oct 3 03:46:40.893912 (XEN) Pending irq=103 Oct 3 03:46:40.893953 (XEN) Pending irq=103 Oct 3 03:46:40.893993 (XEN) Pending irq=103 Oct 3 03:46:40.905777 (XEN) Pending irq=103 Oct 3 03:46:40.905832 (XEN) Pending irq=103 Oct 3 03:46:40.905874 (XEN) Pending irq=103 Oct 3 03:46:40.905915 (XEN) Pending irq=103 Oct 3 03:46:40.905955 (XEN) Pending irq=103 Oct 3 03:46:40.905995 (XEN) Pending irq=103 Oct 3 03:46:40.917805 (XEN) Pending irq=103 Oct 3 03:46:40.917861 (XEN) Pending irq=103 Oct 3 03:46:40.917903 (XEN) Pending irq=103 Oct 3 03:46:40.917944 (XEN) Pending irq=103 Oct 3 03:46:40.917985 (XEN) Pending irq=103 Oct 3 03:46:40.918026 (XEN) Pending irq=103 Oct 3 03:46:40.929783 (XEN) Pending irq=103 Oct 3 03:46:40.929838 (XEN) Pending irq=103 Oct 3 03:46:40.929880 (XEN) Pending irq=103 Oct 3 03:46:40.929921 (XEN) Pending irq=103 Oct 3 03:46:40.929961 (XEN) Pending irq=103 Oct 3 03:46:40.930002 (XEN) Pending irq=103 Oct 3 03:46:40.941749 (XEN) Pending irq=103 Oct 3 03:46:40.941804 (XEN) Pending irq=103 Oct 3 03:46:40.941846 (XEN) Pending irq=103 Oct 3 03:46:40.941887 (XEN) Pending irq=103 Oct 3 03:46:40.941927 (XEN) Pending irq=103 Oct 3 03:46:40.941987 (XEN) Pending irq=103 Oct 3 03:46:40.953783 (XEN) Pending irq=103 Oct 3 03:46:40.953839 (XEN) Pending irq=103 Oct 3 03:46:40.953881 (XEN) Pending irq=103 Oct 3 03:46:40.953922 (XEN) Pending irq=103 Oct 3 03:46:40.953962 (XEN) Pending irq=103 Oct 3 03:46:40.954002 (XEN) Pending irq=103 Oct 3 03:46:40.965767 (XEN) Pending irq=103 Oct 3 03:46:40.965823 (XEN) Pending irq=103 Oct 3 03:46:40.965865 (XEN) Pending irq=103 Oct 3 03:46:40.965905 (XEN) Pending irq=103 Oct 3 03:46:40.965945 (XEN) Pending irq=103 Oct 3 03:46:40.965986 (XEN) Pending irq=103 Oct 3 03:46:40.977780 (XEN) Pending irq=103 Oct 3 03:46:40.977836 (XEN) Pending irq=103 Oct 3 03:46:40.977878 (XEN) Pending irq=103 Oct 3 03:46:40.977918 (XEN) Pending irq=103 Oct 3 03:46:40.977958 (XEN) Pending irq=103 Oct 3 03:46:40.977998 (XEN) Pending irq=103 Oct 3 03:46:40.989777 (XEN) Pending irq=103 Oct 3 03:46:40.989833 (XEN) Pending irq=103 Oct 3 03:46:40.989876 (XEN) Pending irq=103 Oct 3 03:46:40.989917 (XEN) Pending irq=103 Oct 3 03:46:40.989958 (XEN) Pending irq=103 Oct 3 03:46:40.989998 (XEN) Pending irq=103 Oct 3 03:46:41.001779 (XEN) Pending irq=103 Oct 3 03:46:41.001835 (XEN) Pending irq=103 Oct 3 03:46:41.001877 (XEN) Pending irq=103 Oct 3 03:46:41.001918 (XEN) Pending irq=103 Oct 3 03:46:41.001959 (XEN) Pending irq=103 Oct 3 03:46:41.001999 (XEN) Pending irq=103 Oct 3 03:46:41.013777 (XEN) Pending irq=103 Oct 3 03:46:41.013833 (XEN) Pending irq=103 Oct 3 03:46:41.013874 (XEN) Pending irq=103 Oct 3 03:46:41.013915 (XEN) Pending irq=103 Oct 3 03:46:41.013954 (XEN) Pending irq=103 Oct 3 03:46:41.013994 (XEN) Pending irq=103 Oct 3 03:46:41.025776 (XEN) Pending irq=103 Oct 3 03:46:41.025831 (XEN) Pending irq=103 Oct 3 03:46:41.025873 (XEN) Pending irq=103 Oct 3 03:46:41.025914 (XEN) Pending irq=103 Oct 3 03:46:41.025954 (XEN) Pending irq=103 Oct 3 03:46:41.025994 (XEN) Pending irq=103 Oct 3 03:46:41.037774 (XEN) Pending irq=103 Oct 3 03:46:41.037830 (XEN) Pending irq=103 Oct 3 03:46:41.037872 (XEN) Pending irq=103 Oct 3 03:46:41.037912 (XEN) Pending irq=103 Oct 3 03:46:41.037952 (XEN) Pending irq=103 Oct 3 03:46:41.037992 (XEN) Pending irq=103 Oct 3 03:46:41.049779 (XEN) Pending irq=103 Oct 3 03:46:41.049835 (XEN) Pending irq=103 Oct 3 03:46:41.049878 (XEN) Pending irq=103 Oct 3 03:46:41.049918 (XEN) Pending irq=103 Oct 3 03:46:41.049959 (XEN) Pending irq=103 Oct 3 03:46:41.050000 (XEN) Pending irq=103 Oct 3 03:46:41.061776 (XEN) Pending irq=103 Oct 3 03:46:41.061831 (XEN) Pending irq=103 Oct 3 03:46:41.061874 (XEN) Pending irq=103 Oct 3 03:46:41.061915 (XEN) Pending irq=103 Oct 3 03:46:41.061955 (XEN) Pending irq=103 Oct 3 03:46:41.061995 (XEN) Pending irq=103 Oct 3 03:46:41.073655 (XEN) Pending irq=103 Oct 3 03:46:41.073685 (XEN) Pending irq=103 Oct 3 03:46:41.073708 (XEN) Pending irq=103 Oct 3 03:46:41.073730 (XEN) Pending irq=103 Oct 3 03:46:41.073752 (XEN) Pending irq=103 Oct 3 03:46:41.073775 (XEN) Pending irq=103 Oct 3 03:46:41.085681 (XEN) Pending irq=103 Oct 3 03:46:41.085712 (XEN) Pending irq=103 Oct 3 03:46:41.085735 (XEN) Pending irq=103 Oct 3 03:46:41.085757 (XEN) Pending irq=103 Oct 3 03:46:41.085779 (XEN) Pending irq=103 Oct 3 03:46:41.085801 (XEN) Pending irq=103 Oct 3 03:46:41.097676 (XEN) Pending irq=103 Oct 3 03:46:41.097707 (XEN) Pending irq=103 Oct 3 03:46:41.097730 (XEN) Pending irq=103 Oct 3 03:46:41.097752 (XEN) Pending irq=103 Oct 3 03:46:41.097774 (XEN) Pending irq=103 Oct 3 03:46:41.097795 (XEN) Pending irq=103 Oct 3 03:46:41.109734 (XEN) Pending irq=103 Oct 3 03:46:41.109789 (XEN) Pending irq=103 Oct 3 03:46:41.109832 (XEN) Pending irq=103 Oct 3 03:46:41.109872 (XEN) Pending irq=103 Oct 3 03:46:41.109912 (XEN) Pending irq=103 Oct 3 03:46:41.109952 (XEN) Pending irq=103 Oct 3 03:46:41.121765 (XEN) Pending irq=103 Oct 3 03:46:41.121821 (XEN) Pending irq=103 Oct 3 03:46:41.121863 (XEN) Pending irq=103 Oct 3 03:46:41.121903 (XEN) Pending irq=103 Oct 3 03:46:41.121962 (XEN) Pending irq=103 Oct 3 03:46:41.122006 (XEN) Pending irq=103 Oct 3 03:46:41.133771 (XEN) Pending irq=103 Oct 3 03:46:41.133826 (XEN) Pending irq=103 Oct 3 03:46:41.133868 (XEN) Pending irq=103 Oct 3 03:46:41.133909 (XEN) Pending irq=103 Oct 3 03:46:41.133949 (XEN) Pending irq=103 Oct 3 03:46:41.133989 (XEN) Pending irq=103 Oct 3 03:46:41.145770 (XEN) Pending irq=103 Oct 3 03:46:41.145825 (XEN) Pending irq=103 Oct 3 03:46:41.145868 (XEN) Pending irq=103 Oct 3 03:46:41.145908 (XEN) Pending irq=103 Oct 3 03:46:41.145948 (XEN) Pending irq=103 Oct 3 03:46:41.145988 (XEN) Pending irq=103 Oct 3 03:46:41.157751 (XEN) Pending irq=103 Oct 3 03:46:41.157807 (XEN) Pending irq=103 Oct 3 03:46:41.157849 (XEN) Pending irq=103 Oct 3 03:46:41.157890 (XEN) Pending irq=103 Oct 3 03:46:41.157930 (XEN) Pending irq=103 Oct 3 03:46:41.157970 (XEN) Pending irq=103 Oct 3 03:46:41.169764 (XEN) Pending irq=103 Oct 3 03:46:41.169819 (XEN) Pending irq=103 Oct 3 03:46:41.169862 (XEN) Pending irq=103 Oct 3 03:46:41.169902 (XEN) Pending irq=103 Oct 3 03:46:41.169942 (XEN) Pending irq=103 Oct 3 03:46:41.169983 (XEN) Pending irq=103 Oct 3 03:46:41.181791 (XEN) Pending irq=103 Oct 3 03:46:41.181847 (XEN) Pending irq=103 Oct 3 03:46:41.181889 (XEN) Pending irq=103 Oct 3 03:46:41.181930 (XEN) Pending irq=103 Oct 3 03:46:41.181970 (XEN) Pending irq=103 Oct 3 03:46:41.182011 (XEN) Pending irq=103 Oct 3 03:46:41.193757 (XEN) Pending irq=103 Oct 3 03:46:41.193812 (XEN) Pending irq=103 Oct 3 03:46:41.193854 (XEN) Pending irq=103 Oct 3 03:46:41.193895 (XEN) Pending irq=103 Oct 3 03:46:41.193935 (XEN) Pending irq=103 Oct 3 03:46:41.193975 (XEN) Pending irq=103 Oct 3 03:46:41.205751 (XEN) Pending irq=103 Oct 3 03:46:41.205751 (XEN) Pending irq=103 Oct 3 03:46:41.205751 (XEN) Pending irq=103 Oct 3 03:46:41.205751 (XEN) Pending irq=103 Oct 3 03:46:41.205751 (XEN) Pending irq=103 Oct 3 03:46:41.205751 (XEN) Pending irq=103 Oct 3 03:46:41.217789 (XEN) Pending irq=103 Oct 3 03:46:41.217850 (XEN) Pending irq=103 Oct 3 03:46:41.217892 (XEN) Pending irq=103 Oct 3 03:46:41.217932 (XEN) Pending irq=103 Oct 3 03:46:41.217973 (XEN) Pending irq=103 Oct 3 03:46:41.218013 (XEN) Pending irq=103 Oct 3 03:46:41.229769 (XEN) Pending irq=103 Oct 3 03:46:41.229825 (XEN) Pending irq=103 Oct 3 03:46:41.229867 (XEN) Pending irq=103 Oct 3 03:46:41.229907 (XEN) Pending irq=103 Oct 3 03:46:41.229947 (XEN) Pending irq=103 Oct 3 03:46:41.229987 (XEN) Pending irq=103 Oct 3 03:46:41.241780 (XEN) Pending irq=103 Oct 3 03:46:41.241836 (XEN) Pending irq=103 Oct 3 03:46:41.241879 (XEN) Pending irq=103 Oct 3 03:46:41.241920 (XEN) Pending irq=103 Oct 3 03:46:41.241961 (XEN) Pending irq=103 Oct 3 03:46:41.242001 (XEN) Pending irq=103 Oct 3 03:46:41.253769 (XEN) Pending irq=103 Oct 3 03:46:41.253825 (XEN) Pending irq=103 Oct 3 03:46:41.253867 (XEN) Pending irq=103 Oct 3 03:46:41.253908 (XEN) Pending irq=103 Oct 3 03:46:41.253948 (XEN) Pending irq=103 Oct 3 03:46:41.253988 (XEN) Pending irq=103 Oct 3 03:46:41.265775 (XEN) Pending irq=103 Oct 3 03:46:41.265830 (XEN) Pending irq=103 Oct 3 03:46:41.265873 (XEN) Pending irq=103 Oct 3 03:46:41.265914 (XEN) Pending irq=103 Oct 3 03:46:41.265954 (XEN) Pending irq=103 Oct 3 03:46:41.265994 (XEN) Pending irq=103 Oct 3 03:46:41.277774 (XEN) Pending irq=103 Oct 3 03:46:41.277830 (XEN) Pending irq=103 Oct 3 03:46:41.277872 (XEN) Pending irq=103 Oct 3 03:46:41.277912 (XEN) Pending irq=103 Oct 3 03:46:41.277953 (XEN) Pending irq=103 Oct 3 03:46:41.277992 (XEN) Pending irq=103 Oct 3 03:46:41.289771 (XEN) Pending irq=103 Oct 3 03:46:41.289827 (XEN) Pending irq=103 Oct 3 03:46:41.289870 (XEN) Pending irq=103 Oct 3 03:46:41.289911 (XEN) Pending irq=103 Oct 3 03:46:41.289951 (XEN) Pending irq=103 Oct 3 03:46:41.289991 (XEN) Pending irq=103 Oct 3 03:46:41.301754 (XEN) Pending irq=103 Oct 3 03:46:41.301810 (XEN) Pending irq=103 Oct 3 03:46:41.301852 (XEN) Pending irq=103 Oct 3 03:46:41.301912 (XEN) Pending irq=103 Oct 3 03:46:41.301955 (XEN) Pending irq=103 Oct 3 03:46:41.301996 (XEN) Pending irq=103 Oct 3 03:46:41.313728 (XEN) Pending irq=103 Oct 3 03:46:41.313784 (XEN) Pending irq=103 Oct 3 03:46:41.313827 (XEN) Pending irq=103 Oct 3 03:46:41.313868 (XEN) Pending irq=103 Oct 3 03:46:41.313909 (XEN) Pending irq=103 Oct 3 03:46:41.313949 (XEN) Pending irq=103 Oct 3 03:46:41.325702 (XEN) Pending irq=103 Oct 3 03:46:41.325758 (XEN) Pending irq=103 Oct 3 03:46:41.325801 (XEN) Pending irq=103 Oct 3 03:46:41.325841 (XEN) Pending irq=103 Oct 3 03:46:41.325881 (XEN) Pending irq=103 Oct 3 03:46:41.325920 (XEN) Pending irq=103 Oct 3 03:46:41.337728 (XEN) Pending irq=103 Oct 3 03:46:41.337783 (XEN) Pending irq=103 Oct 3 03:46:41.337825 (XEN) Pending irq=103 Oct 3 03:46:41.337866 (XEN) Pending irq=103 Oct 3 03:46:41.337906 (XEN) Pending irq=103 Oct 3 03:46:41.337946 (XEN) Pending irq=103 Oct 3 03:46:41.349738 (XEN) Pending irq=103 Oct 3 03:46:41.349793 (XEN) Pending irq=103 Oct 3 03:46:41.349836 (XEN) Pending irq=103 Oct 3 03:46:41.349876 (XEN) Pending irq=103 Oct 3 03:46:41.349916 (XEN) Pending irq=103 Oct 3 03:46:41.349955 (XEN) Pending irq=103 Oct 3 03:46:41.361686 (XEN) Pending irq=103 Oct 3 03:46:41.361716 (XEN) Pending irq=103 Oct 3 03:46:41.361739 (XEN) Pending irq=103 Oct 3 03:46:41.361762 (XEN) Pending irq=103 Oct 3 03:46:41.361784 (XEN) Pending irq=103 Oct 3 03:46:41.361825 (XEN) Pending irq=103 Oct 3 03:46:41.373727 (XEN) Pending irq=103 Oct 3 03:46:41.373758 (XEN) Pending irq=103 Oct 3 03:46:41.373781 (XEN) Pending irq=103 Oct 3 03:46:41.373804 (XEN) Pending irq=103 Oct 3 03:46:41.373826 (XEN) Pending irq=103 Oct 3 03:46:41.373848 (XEN) Pending irq=103 Oct 3 03:46:41.385746 (XEN) Pending irq=103 Oct 3 03:46:41.385802 (XEN) Pending irq=103 Oct 3 03:46:41.385845 (XEN) Pending irq=103 Oct 3 03:46:41.385885 (XEN) Pending irq=103 Oct 3 03:46:41.386027 (XEN) Pending irq=103 Oct 3 03:46:41.386051 (XEN) Pending irq=103 Oct 3 03:46:41.397767 (XEN) Pending irq=103 Oct 3 03:46:41.397824 (XEN) Pending irq=103 Oct 3 03:46:41.397866 (XEN) Pending irq=103 Oct 3 03:46:41.397907 (XEN) Pending irq=103 Oct 3 03:46:41.397948 (XEN) Pending irq=103 Oct 3 03:46:41.397989 (XEN) Pending irq=103 Oct 3 03:46:41.409763 (XEN) Pending irq=103 Oct 3 03:46:41.409819 (XEN) Pending irq=103 Oct 3 03:46:41.409861 (XEN) Pending irq=103 Oct 3 03:46:41.409902 (XEN) Pending irq=103 Oct 3 03:46:41.409943 (XEN) Pending irq=103 Oct 3 03:46:41.409983 (XEN) Pending irq=103 Oct 3 03:46:41.421712 (XEN) Pending irq=103 Oct 3 03:46:41.421767 (XEN) Pending irq=103 Oct 3 03:46:41.421841 (XEN) Pending irq=103 Oct 3 03:46:41.421889 (XEN) Pending irq=103 Oct 3 03:46:41.421931 (XEN) Pending irq=103 Oct 3 03:46:41.421972 (XEN) Pending irq=103 Oct 3 03:46:41.433775 (XEN) Pending irq=103 Oct 3 03:46:41.433831 (XEN) Pending irq=103 Oct 3 03:46:41.433874 (XEN) Pending irq=103 Oct 3 03:46:41.433914 (XEN) Pending irq=103 Oct 3 03:46:41.433955 (XEN) Pending irq=103 Oct 3 03:46:41.433996 (XEN) Pending irq=103 Oct 3 03:46:41.445729 (XEN) Pending irq=103 Oct 3 03:46:41.445785 (XEN) Pending irq=103 Oct 3 03:46:41.445828 (XEN) Pending irq=103 Oct 3 03:46:41.445869 (XEN) Pending irq=103 Oct 3 03:46:41.445909 (XEN) Pending irq=103 Oct 3 03:46:41.445949 (XEN) Pending irq=103 Oct 3 03:46:41.457756 (XEN) Pending irq=103 Oct 3 03:46:41.457813 (XEN) Pending irq=103 Oct 3 03:46:41.457855 (XEN) Pending irq=103 Oct 3 03:46:41.457896 (XEN) Pending irq=103 Oct 3 03:46:41.457937 (XEN) Pending irq=103 Oct 3 03:46:41.457977 (XEN) Pending irq=103 Oct 3 03:46:41.469746 (XEN) Pending irq=103 Oct 3 03:46:41.469803 (XEN) Pending irq=103 Oct 3 03:46:41.469845 (XEN) Pending irq=103 Oct 3 03:46:41.469886 (XEN) Pending irq=103 Oct 3 03:46:41.469926 (XEN) Pending irq=103 Oct 3 03:46:41.469966 (XEN) Pending irq=103 Oct 3 03:46:41.481767 (XEN) Pending irq=103 Oct 3 03:46:41.481823 (XEN) Pending irq=103 Oct 3 03:46:41.481884 (XEN) Pending irq=103 Oct 3 03:46:41.481928 (XEN) Pending irq=103 Oct 3 03:46:41.481969 (XEN) Pending irq=103 Oct 3 03:46:41.482009 (XEN) Pending irq=103 Oct 3 03:46:41.493746 (XEN) Pending irq=103 Oct 3 03:46:41.493803 (XEN) Pending irq=103 Oct 3 03:46:41.493846 (XEN) Pending irq=103 Oct 3 03:46:41.493887 (XEN) Pending irq=103 Oct 3 03:46:41.493927 (XEN) Pending irq=103 Oct 3 03:46:41.493967 (XEN) Pending irq=103 Oct 3 03:46:41.505766 (XEN) Pending irq=103 Oct 3 03:46:41.505823 (XEN) Pending irq=103 Oct 3 03:46:41.505866 (XEN) Pending irq=103 Oct 3 03:46:41.505906 (XEN) Pending irq=103 Oct 3 03:46:41.505945 (XEN) Pending irq=103 Oct 3 03:46:41.505985 (XEN) Pending irq=103 Oct 3 03:46:41.517772 (XEN) Pending irq=103 Oct 3 03:46:41.517805 (XEN) Pending irq=103 Oct 3 03:46:41.517830 (XEN) Pending irq=103 Oct 3 03:46:41.517852 (XEN) Pending irq=103 Oct 3 03:46:41.517874 (XEN) Pending irq=103 Oct 3 03:46:41.517896 (XEN) Pending irq=103 Oct 3 03:46:41.517917 (XEN) Pending irq=103 Oct 3 03:46:41.529765 (XEN) Pending irq=103 Oct 3 03:46:41.529820 (XEN) Pending irq=103 Oct 3 03:46:41.529861 (XEN) Pending irq=103 Oct 3 03:46:41.529902 (XEN) Pending irq=103 Oct 3 03:46:41.529942 (XEN) Pending irq=103 Oct 3 03:46:41.529981 (XEN) Pending irq=103 Oct 3 03:46:41.541713 (XEN) Pending irq=103 Oct 3 03:46:41.541713 (XEN) Pending irq=103 Oct 3 03:46:41.541713 (XEN) Pending irq=103 Oct 3 03:46:41.541713 (XEN) Pending irq=103 Oct 3 03:46:41.541713 (XEN) Pending irq=103 Oct 3 03:46:41.541713 (XEN) Pending irq=103 Oct 3 03:46:41.553771 (XEN) Pending irq=103 Oct 3 03:46:41.553831 (XEN) Pending irq=103 Oct 3 03:46:41.553873 (XEN) Pending irq=103 Oct 3 03:46:41.553913 (XEN) Pending irq=103 Oct 3 03:46:41.553953 (XEN) Pending irq=103 Oct 3 03:46:41.553993 (XEN) Pending irq=103 Oct 3 03:46:41.565771 (XEN) Pending irq=103 Oct 3 03:46:41.565826 (XEN) Pending irq=103 Oct 3 03:46:41.565868 (XEN) Pending irq=103 Oct 3 03:46:41.565908 (XEN) Pending irq=103 Oct 3 03:46:41.565948 (XEN) Pending irq=103 Oct 3 03:46:41.565989 (XEN) Pending irq=103 Oct 3 03:46:41.577776 (XEN) Pending irq=103 Oct 3 03:46:41.577832 (XEN) Pending irq=103 Oct 3 03:46:41.577874 (XEN) Pending irq=103 Oct 3 03:46:41.577915 (XEN) Pending irq=103 Oct 3 03:46:41.577955 (XEN) Pending irq=103 Oct 3 03:46:41.577996 (XEN) Pending irq=103 Oct 3 03:46:41.589709 (XEN) Pending irq=103 Oct 3 03:46:41.589738 (XEN) Pending irq=103 Oct 3 03:46:41.589761 (XEN) Pending irq=103 Oct 3 03:46:41.589784 (XEN) Pending irq=103 Oct 3 03:46:41.589806 (XEN) Pending irq=103 Oct 3 03:46:41.589828 (XEN) Pending irq=103 Oct 3 03:46:41.601697 (XEN) Pending irq=103 Oct 3 03:46:41.601727 (XEN) Pending irq=103 Oct 3 03:46:41.601750 (XEN) Pending irq=103 Oct 3 03:46:41.601772 (XEN) Pending irq=103 Oct 3 03:46:41.601794 (XEN) Pending irq=103 Oct 3 03:46:41.601816 (XEN) Pending irq=103 Oct 3 03:46:41.613690 (XEN) Pending irq=103 Oct 3 03:46:41.613690 (XEN) Pending irq=103 Oct 3 03:46:41.613690 (XEN) Pending irq=103 Oct 3 03:46:41.613690 (XEN) Pending irq=103 Oct 3 03:46:41.613690 (XEN) Pending irq=103 Oct 3 03:46:41.613690 (XEN) Pending irq=103 Oct 3 03:46:41.625742 (XEN) Pending irq=103 Oct 3 03:46:41.625802 (XEN) Pending irq=103 Oct 3 03:46:41.625845 (XEN) Pending irq=103 Oct 3 03:46:41.625886 (XEN) Pending irq=103 Oct 3 03:46:41.625926 (XEN) Pending irq=103 Oct 3 03:46:41.625967 (XEN) Pending irq=103 Oct 3 03:46:41.637742 (XEN) Pending irq=103 Oct 3 03:46:41.637772 (XEN) Pending irq=103 Oct 3 03:46:41.637795 (XEN) Pending irq=103 Oct 3 03:46:41.637817 (XEN) Pending irq=103 Oct 3 03:46:41.637839 (XEN) Pending irq=103 Oct 3 03:46:41.637861 (XEN) Pending irq=103 Oct 3 03:46:41.649714 (XEN) Pending irq=103 Oct 3 03:46:41.649714 (XEN) Pending irq=103 Oct 3 03:46:41.649714 (XEN) Pending irq=103 Oct 3 03:46:41.649714 (XEN) Pending irq=103 Oct 3 03:46:41.649714 (XEN) Pending irq=103 Oct 3 03:46:41.649714 (XEN) Pending irq=103 Oct 3 03:46:41.661745 (XEN) Pending irq=103 Oct 3 03:46:41.661780 (XEN) Pending irq=103 Oct 3 03:46:41.661803 (XEN) Pending irq=103 Oct 3 03:46:41.661825 (XEN) Pending irq=103 Oct 3 03:46:41.661847 (XEN) Pending irq=103 Oct 3 03:46:41.661869 (XEN) Pending irq=103 Oct 3 03:46:41.673750 (XEN) Pending irq=103 Oct 3 03:46:41.673804 (XEN) Pending irq=103 Oct 3 03:46:41.673846 (XEN) Pending irq=103 Oct 3 03:46:41.673887 (XEN) Pending irq=103 Oct 3 03:46:41.673927 (XEN) Pending irq=103 Oct 3 03:46:41.673967 (XEN) Pending irq=103 Oct 3 03:46:41.685787 (XEN) Pending irq=103 Oct 3 03:46:41.685842 (XEN) Pending irq=103 Oct 3 03:46:41.685884 (XEN) Pending irq=103 Oct 3 03:46:41.685925 (XEN) Pending irq=103 Oct 3 03:46:41.685965 (XEN) Pending irq=103 Oct 3 03:46:41.686005 (XEN) Pending irq=103 Oct 3 03:46:41.697733 (XEN) Pending irq=103 Oct 3 03:46:41.697733 (XEN) Pending irq=103 Oct 3 03:46:41.697733 (XEN) Pending irq=103 Oct 3 03:46:41.697733 (XEN) Pending irq=103 Oct 3 03:46:41.697733 (XEN) Pending irq=103 Oct 3 03:46:41.697733 (XEN) Pending irq=103 Oct 3 03:46:41.709795 (XEN) Pending irq=103 Oct 3 03:46:41.709856 (XEN) Pending irq=103 Oct 3 03:46:41.709898 (XEN) Pending irq=103 Oct 3 03:46:41.709938 (XEN) Pending irq=103 Oct 3 03:46:41.709979 (XEN) Pending irq=103 Oct 3 03:46:41.710019 (XEN) Pending irq=103 Oct 3 03:46:41.721776 (XEN) Pending irq=103 Oct 3 03:46:41.721832 (XEN) Pending irq=103 Oct 3 03:46:41.721874 (XEN) Pending irq=103 Oct 3 03:46:41.721915 (XEN) Pending irq=103 Oct 3 03:46:41.721955 (XEN) Pending irq=103 Oct 3 03:46:41.721996 (XEN) Pending irq=103 Oct 3 03:46:41.733785 (XEN) Pending irq=103 Oct 3 03:46:41.733840 (XEN) Pending irq=103 Oct 3 03:46:41.733882 (XEN) Pending irq=103 Oct 3 03:46:41.733922 (XEN) Pending irq=103 Oct 3 03:46:41.733962 (XEN) Pending irq=103 Oct 3 03:46:41.734001 (XEN) Pending irq=103 Oct 3 03:46:41.745777 (XEN) Pending irq=103 Oct 3 03:46:41.745832 (XEN) Pending irq=103 Oct 3 03:46:41.745874 (XEN) Pending irq=103 Oct 3 03:46:41.745914 (XEN) Pending irq=103 Oct 3 03:46:41.745954 (XEN) Pending irq=103 Oct 3 03:46:41.745993 (XEN) Pending irq=103 Oct 3 03:46:41.757726 (XEN) Pending irq=103 Oct 3 03:46:41.757726 (XEN) Pending irq=103 Oct 3 03:46:41.757726 (XEN) Pending irq=103 Oct 3 03:46:41.757726 (XEN) Pending irq=103 Oct 3 03:46:41.757726 (XEN) Pending irq=103 Oct 3 03:46:41.757726 (XEN) Pending irq=103 Oct 3 03:46:41.769713 (XEN) Pending irq=103 Oct 3 03:46:41.769713 (XEN) Pending irq=103 Oct 3 03:46:41.769713 (XEN) Pending irq=103 Oct 3 03:46:41.769713 (XEN) Pending irq=103 Oct 3 03:46:41.769713 (XEN) Pending irq=103 Oct 3 03:46:41.769713 (XEN) Pending irq=103 Oct 3 03:46:41.781768 (XEN) Pending irq=103 Oct 3 03:46:41.781828 (XEN) Pending irq=103 Oct 3 03:46:41.781870 (XEN) Pending irq=103 Oct 3 03:46:41.781910 (XEN) Pending irq=103 Oct 3 03:46:41.781951 (XEN) Pending irq=103 Oct 3 03:46:41.781990 (XEN) Pending irq=103 Oct 3 03:46:41.793778 (XEN) Pending irq=103 Oct 3 03:46:41.793833 (XEN) Pending irq=103 Oct 3 03:46:41.793875 (XEN) Pending irq=103 Oct 3 03:46:41.793916 (XEN) Pending irq=103 Oct 3 03:46:41.793956 (XEN) Pending irq=103 Oct 3 03:46:41.793996 (XEN) Pending irq=103 Oct 3 03:46:41.805784 (XEN) Pending irq=103 Oct 3 03:46:41.805839 (XEN) Pending irq=103 Oct 3 03:46:41.805881 (XEN) Pending irq=103 Oct 3 03:46:41.805921 (XEN) Pending irq=103 Oct 3 03:46:41.805961 (XEN) Pending irq=103 Oct 3 03:46:41.806001 (XEN) Pending irq=103 Oct 3 03:46:41.817768 (XEN) Pending irq=103 Oct 3 03:46:41.817823 (XEN) Pending irq=103 Oct 3 03:46:41.817865 (XEN) Pending irq=103 Oct 3 03:46:41.817906 (XEN) Pending irq=103 Oct 3 03:46:41.817946 (XEN) Pending irq=103 Oct 3 03:46:41.817986 (XEN) Pending irq=103 Oct 3 03:46:41.829744 (XEN) Pending irq=103 Oct 3 03:46:41.829799 (XEN) Pending irq=103 Oct 3 03:46:41.829841 (XEN) Pending irq=103 Oct 3 03:46:41.829881 (XEN) Pending irq=103 Oct 3 03:46:41.829921 (XEN) Pending irq=103 Oct 3 03:46:41.829982 (XEN) Pending irq=103 Oct 3 03:46:41.841760 (XEN) Pending irq=103 Oct 3 03:46:41.841815 (XEN) Pending irq=103 Oct 3 03:46:41.841858 (XEN) Pending irq=103 Oct 3 03:46:41.841898 (XEN) Pending irq=103 Oct 3 03:46:41.841939 (XEN) Pending irq=103 Oct 3 03:46:41.841979 (XEN) Pending irq=103 Oct 3 03:46:41.853767 (XEN) Pending irq=103 Oct 3 03:46:41.853823 (XEN) Pending irq=103 Oct 3 03:46:41.853865 (XEN) Pending irq=103 Oct 3 03:46:41.853906 (XEN) Pending irq=103 Oct 3 03:46:41.853946 (XEN) Pending irq=103 Oct 3 03:46:41.853987 (XEN) Pending irq=103 Oct 3 03:46:41.865765 (XEN) Pending irq=103 Oct 3 03:46:41.866503 (XEN) Pending irq=103 Oct 3 03:46:41.866561 (XEN) Pending irq=103 Oct 3 03:46:41.866604 (XEN) Pending irq=103 Oct 3 03:46:41.866652 (XEN) Pending irq=103 Oct 3 03:46:41.866716 (XEN) Pending irq=103 Oct 3 03:46:41.877745 (XEN) Pending irq=103 Oct 3 03:46:41.877800 (XEN) Pending irq=103 Oct 3 03:46:41.877842 (XEN) Pending irq=103 Oct 3 03:46:41.877882 (XEN) Pending irq=103 Oct 3 03:46:41.877922 (XEN) Pending irq=103 Oct 3 03:46:41.877962 (XEN) Pending irq=103 Oct 3 03:46:41.889756 (XEN) Pending irq=103 Oct 3 03:46:41.889756 (XEN) Pending irq=103 Oct 3 03:46:41.889756 (XEN) Pending irq=103 Oct 3 03:46:41.889756 (XEN) Pending irq=103 Oct 3 03:46:41.889756 (XEN) Pending irq=103 Oct 3 03:46:41.889756 (XEN) Pending irq=103 Oct 3 03:46:41.901787 (XEN) Pending irq=103 Oct 3 03:46:41.901847 (XEN) Pending irq=103 Oct 3 03:46:41.901889 (XEN) Pending irq=103 Oct 3 03:46:41.901930 (XEN) Pending irq=103 Oct 3 03:46:41.901970 (XEN) Pending irq=103 Oct 3 03:46:41.902010 (XEN) Pending irq=103 Oct 3 03:46:41.913779 (XEN) Pending irq=103 Oct 3 03:46:41.913835 (XEN) Pending irq=103 Oct 3 03:46:41.913877 (XEN) Pending irq=103 Oct 3 03:46:41.913918 (XEN) Pending irq=103 Oct 3 03:46:41.913959 (XEN) Pending irq=103 Oct 3 03:46:41.913999 (XEN) Pending irq=103 Oct 3 03:46:41.925833 (XEN) Pending irq=103 Oct 3 03:46:41.925889 (XEN) Pending irq=103 Oct 3 03:46:41.925931 (XEN) Pending irq=103 Oct 3 03:46:41.925972 (XEN) Pending irq=103 Oct 3 03:46:41.926011 (XEN) Pending irq=103 Oct 3 03:46:41.926051 (XEN) Pending irq=103 Oct 3 03:46:41.937676 (XEN) Pending irq=103 Oct 3 03:46:41.937676 (XEN) Pending irq=103 Oct 3 03:46:41.937676 (XEN) Pending irq=103 Oct 3 03:46:41.937676 (XEN) Pending irq=103 Oct 3 03:46:41.937676 (XEN) Pending irq=103 Oct 3 03:46:41.937676 (XEN) Pending irq=103 Oct 3 03:46:41.949666 (XEN) No periodic timer Oct 3 03:46:41.949666 (XEN) UNIT1 affinities: hard={0-1} soft={0-1} Oct 3 03:46:41.949666 (XEN) VCPU1: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 03:46:41.961677 (XEN) pause_count=0 pause_flags=1 Oct 3 03:46:41.961677 (XEN) GICH_LRs (vcpu 1) mask=0 Oct 3 03:46:41.961677 (XEN) VCPU_LR[0]=0 Oct 3 03:46:41.961677 (XEN) VCPU_LR[1]=0 Oct 3 03:46:41.961677 (XEN) VCPU_LR[2]=0 Oct 3 03:46:41.973674 (XEN) VCPU_LR[3]=0 Oct 3 03:46:41.973674 (XEN) No periodic timer Oct 3 03:46:41.973674 (XEN) Notifying guest 0:0 (virq 1, port 0) Oct 3 03:46:41.973674 (XEN) Notifying guest 0:1 (virq 1, port 0) Oct 3 03:46:41.985585 Oct 3 03:46:48.660945 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 03:46:48.677821 Oct 3 03:46:48.679192 Oct 3 03:46:48.701619 arndale-westfield login: [ 4845.168435] vif vif-1: 5 starting transaction Oct 3 03:48:14.973722 [ 4845.171440] vif vif-1: 5 starting transaction Oct 3 03:48:14.973776 [ 4850.177089] xenbus_probe_frontend: xenbus_frontend_dev_shutdown: device/vif/1 timeout closing device Oct 3 03:48:19.989777 [ 4850.185023] sd 0:0:0:0: [sda] Synchronizing SCSI cache Oct 3 03:48:19.989850 [ 4850.195588] wake enabled for irq 119 (gpx1-4) Oct 3 03:48:20.001784 [ 4850.198606] wake enabled for irq 120 (gpx1-5) Oct 3 03:48:20.001845 [ 4850.203005] wake enabled for irq 121 (gpx1-6) Oct 3 03:48:20.013764 [ 4850.207456] wake enabled for irq 122 (gpx1-7) Oct 3 03:48:20.013826 [ 4850.211859] wake enabled for irq 123 (gpx2-0) Oct 3 03:48:20.013874 [ 4850.216285] wake enabled for irq 124 (gpx2-1) Oct 3 03:48:20.025723 [ 4850.221235] reboot: Resô Oct 3 03:48:20.361653 Oct 3 03:48:20.361667 Oct 3 03:48:20.361705 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 03:48:20.361734 Oct 3 03:48:20.361755 CPU: Exynos5250@1000MHz Oct 3 03:48:20.361778 Oct 3 03:48:20.361798 Board: Arndale Oct 3 03:48:20.373652 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 03:48:20.373686 ready Oct 3 03:48:20.373708 DRAM: 2 GiB Oct 3 03:48:20.373730 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 03:48:20.397613 trace: enabled Oct 3 03:48:20.433631 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 03:48:20.793676 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 03:48:20.853658 In: serial Oct 3 03:48:20.853689 Out: serial Oct 3 03:48:20.853711 Err: serial Oct 3 03:48:20.853733 SCSI: ARNDALE SCSI INIT Oct 3 03:48:20.853756 Target spinup took 0 ms. Oct 3 03:48:20.865646 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 03:48:20.865798 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 03:48:20.865798 Net: Net Initialization Skipped Oct 3 03:48:20.877707 No ethernet found. Oct 3 03:48:20.877738 Hostname: arndale-westfield Oct 3 03:48:20.877762 Hit any key to stop autoboot: 2  1  0 Oct 3 03:48:22.797743 (Re)start USB... Oct 3 03:48:22.797818 USB0: USB EHCI 1.00 Oct 3 03:48:22.809757 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 03:48:28.401728 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 03:48:28.413731 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 03:48:28.861072 Waiting for Ethernet connection... done. Oct 3 03:48:30.456966 BOOTP broadcast 1 Oct 3 03:48:30.457033 BOOTP broadcast 2 Oct 3 03:48:31.668949 DHCP client bound to address 10.149.64.45 (1267 ms) Oct 3 03:48:31.680881 Using asx0 device Oct 3 03:48:31.680881 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 03:48:31.680881 Filename 'pxelinux.0'. Oct 3 03:48:31.680881 Load address: 0x43e00000 Oct 3 03:48:31.680881 Loading: *### Oct 3 03:48:31.704840 2.4 MiB/s Oct 3 03:48:31.704840 done Oct 3 03:48:31.704840 Bytes transferred = 42430 (a5be hex) Oct 3 03:48:31.704840 missing environment variable: pxeuuid Oct 3 03:48:31.716899 Retrieving file: pxelinux.cfg/0A95402D Oct 3 03:48:31.716899 Using asx0 device Oct 3 03:48:31.716899 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 03:48:31.716899 Filename 'pxelinux.cfg/0A95402D'. Oct 3 03:48:31.728999 Load address: 0x51000000 Oct 3 03:48:31.729063 Loading: *# Oct 3 03:48:31.729096 355.5 KiB/s Oct 3 03:48:31.729096 done Oct 3 03:48:31.729096 Bytes transferred = 728 (2d8 hex) Oct 3 03:48:31.729096 Config file found Oct 3 03:48:31.729096 Ignoring unknown command: serial Oct 3 03:48:31.741051 1: ^Overwrite Oct 3 03:48:31.741125 Retrieving file: /osstest/tmp//arndale-westfield--initrd.gz Oct 3 03:48:31.741174 Using asx0 device Oct 3 03:48:31.741215 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 03:48:31.752899 Filename '/osstest/tmp//arndale-westfield--initrd.gz'. Oct 3 03:48:31.752899 Load address: 0x43300000 Oct 3 03:48:31.752899 Loading: *################################################################# Oct 3 03:48:32.064964 ################################################################# Oct 3 03:48:32.376784 ################################################################# Oct 3 03:48:32.676780 ################################################################# Oct 3 03:48:32.992976 ################################################################# Oct 3 03:48:33.292805 ################################################################# Oct 3 03:48:33.605010 ################################################################# Oct 3 03:48:33.916823 ################################################################# Oct 3 03:48:34.216792 ################################################################# Oct 3 03:48:34.528998 ################################################################# Oct 3 03:48:34.840928 ################################################################# Oct 3 03:48:35.165032 ################################################################# Oct 3 03:48:35.476984 ################################################################# Oct 3 03:48:35.764985 ################################################################# Oct 3 03:48:36.037619 ################################################################# Oct 3 03:48:36.325635 ################################################################# Oct 3 03:48:36.625640 ################################################################# Oct 3 03:48:36.913638 ################################################################# Oct 3 03:48:37.201641 ################################################################# Oct 3 03:48:37.501698 ################################################################# Oct 3 03:48:37.789648 ################################################################# Oct 3 03:48:38.089640 ################################################################# Oct 3 03:48:38.377657 ################################################################# Oct 3 03:48:38.677686 ################################################################# Oct 3 03:48:38.965632 ################################################################# Oct 3 03:48:39.265716 ################################################################# Oct 3 03:48:39.553643 ################################################################# Oct 3 03:48:39.853635 ######################################## Oct 3 03:48:40.021715 2.9 MiB/s Oct 3 03:48:40.021745 done Oct 3 03:48:40.021767 Bytes transferred = 26339182 (191e76e hex) Oct 3 03:48:40.033724 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/linux Oct 3 03:48:40.045763 Using asx0 device Oct 3 03:48:40.045793 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 03:48:40.045820 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/linux'. Oct 3 03:48:40.057769 Load address: 0x42000000 Oct 3 03:48:40.057801 Loading: *################################################################# Oct 3 03:48:40.381634 ################################################################# Oct 3 03:48:40.705673 ################################################################# Oct 3 03:48:41.017642 ################################################################# Oct 3 03:48:41.329633 ################################################################# Oct 3 03:48:41.617644 ############################################# Oct 3 03:48:41.845703 2.8 MiB/s Oct 3 03:48:41.845755 done Oct 3 03:48:41.845795 Bytes transferred = 5427712 (52d200 hex) Oct 3 03:48:41.845840 append: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=51015 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 03:48:41.893702 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb Oct 3 03:48:41.893741 Using asx0 device Oct 3 03:48:41.893764 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 03:48:41.905713 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb'. Oct 3 03:48:41.917676 Load address: 0x43000000 Oct 3 03:48:41.917708 Loading: *#### Oct 3 03:48:41.929656 2.3 MiB/s Oct 3 03:48:41.929686 done Oct 3 03:48:41.929708 Bytes transferred = 46686 (b65e hex) Oct 3 03:48:41.941712 Kernel image @ 0x42000000 [ 0x000000 - 0x52d200 ] Oct 3 03:48:41.941744 ## Flattened Device Tree blob at 43000000 Oct 3 03:48:41.941770 Booting using the fdt blob at 0x43000000 Oct 3 03:48:41.953672 Loading Ramdisk to 4e6e1000, end 4ffff76e ... OK Oct 3 03:48:42.373675 Loading Device Tree to 4e6d2000, end 4e6e065d ... OK Oct 3 03:48:42.373709 Oct 3 03:48:42.385660 Starting kernel ...(fake run for tracing) Oct 3 03:48:42.385692 Oct 3 03:48:42.385713 Oct 3 03:48:42.397637 Starting kernel ... Oct 3 03:48:42.397668 Oct 3 03:48:42.397689 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 03:48:48.433632 [ 0.000000] Linux version 6.1.0-25-armmp (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.106-3 (2024-08-26) Oct 3 03:48:48.457662 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 03:48:48.457662 [ 0.000000] CPU: div instructions available: patching division code Oct 3 03:48:48.469674 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 03:48:48.469674 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 03:48:48.481676 [ 0.000000] Memory policy: Data cache writealloc Oct 3 03:48:48.481676 [ 0.000000] efi: UEFI not found. Oct 3 03:48:48.493673 [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 Oct 3 03:48:48.493673 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 03:48:48.493673 [ 0.000000] Zone ranges: Oct 3 03:48:48.493673 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 03:48:48.505660 [ 0.000000] Normal empty Oct 3 03:48:48.505660 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 03:48:48.517668 [ 0.000000] Movable zone start for each node Oct 3 03:48:48.517668 [ 0.000000] Early memory node ranges Oct 3 03:48:48.517668 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 03:48:48.529668 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 03:48:48.529668 [ 0.000000] percpu: Embedded 18 pages/cpu s44692 r8192 d20844 u73728 Oct 3 03:48:48.541677 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 03:48:48.553676 [ 0.000000] Kernel command line: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=51015 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 03:48:48.589666 [ 0.000000] Unknown kernel command line parameters "preseed --- vga=normal auto=true hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=51015 domain=test-lab.xenproject.org", will be passed to user space. Oct 3 03:48:48.625859 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 03:48:48.637788 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 03:48:48.649767 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 03:48:48.649832 [ 0.000000] Memory: 2015968K/2097152K available (11264K kernel code, 1696K rwdata, 3724K rodata, 2048K init, 376K bss, 64800K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 03:48:48.673804 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 03:48:48.673871 [ 0.000000] ftrace: allocating 39612 entries in 117 pages Oct 3 03:48:48.685810 [ 0.000000] ftrace: allocated 117 pages with 5 groups Oct 3 03:48:48.685878 [ 0.000000] trace event string verifier disabled Oct 3 03:48:48.685926 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 03:48:48.697755 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 03:48:48.697819 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 03:48:48.709777 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 03:48:48.709838 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 03:48:48.721780 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 03:48:48.721844 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 03:48:48.733767 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 03:48:48.733829 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 03:48:48.745663 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 03:48:48.745663 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 03:48:48.757656 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 03:48:48.757656 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 03:48:48.769664 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 03:48:48.781673 [ 0.002608] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 03:48:48.781673 [ 0.002621] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 03:48:48.793672 [ 0.002635] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 03:48:48.805673 [ 0.002647] Ignoring duplicate/late registration of read_current_timer delay Oct 3 03:48:48.805673 [ 0.003010] Console: colour dummy device 80x30 Oct 3 03:48:48.817661 [ 0.003049] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 03:48:48.829673 [ 0.003063] CPU: Testing write buffer coherency: ok Oct 3 03:48:48.829673 [ 0.003105] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 03:48:48.841657 [ 0.003113] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 03:48:48.841657 [ 0.003120] pid_max: default: 32768 minimum: 301 Oct 3 03:48:48.853668 [ 0.003477] LSM: Security Framework initializing Oct 3 03:48:48.853668 [ 0.003549] landlock: Up and running. Oct 3 03:48:48.853668 [ 0.003553] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 03:48:48.865657 [ 0.003736] AppArmor: AppArmor initialized Oct 3 03:48:48.865657 [ 0.003749] TOMOYO Linux initialized Oct 3 03:48:48.877660 [ 0.003794] LSM support for eBPF active Oct 3 03:48:48.877660 [ 0.004037] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 03:48:48.877660 [ 0.004051] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 03:48:48.889652 [ 0.005471] /cpus/cpu@0 missing clock-frequency property Oct 3 03:48:48.901662 [ 0.005498] /cpus/cpu@1 missing clock-frequency property Oct 3 03:48:48.901662 [ 0.005511] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 03:48:48.901662 [ 0.006459] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 03:48:48.913657 [ 0.006466] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 03:48:48.925656 [ 0.006570] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 03:48:48.925656 [ 0.006576] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 03:48:48.937623 [ 0.006721] Setting up static identity map for 0x40300000 - 0x403000ac Oct 3 03:48:48.937623 [ 0.007873] rcu: Hierarchical SRCU implementation. Oct 3 03:48:48.949668 [ 0.007878] rcu: Max phase no-delay instances is 1000. Oct 3 03:48:48.949668 [ 0.009987] EFI services will not be available. Oct 3 03:48:48.949668 [ 0.010332] smp: Bringing up secondary CPUs ... Oct 3 03:48:48.961658 [ 0.011063] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 03:48:48.961658 [ 0.011075] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 03:48:48.973666 [ 0.011209] smp: Brought up 1 node, 2 CPUs Oct 3 03:48:48.973666 [ 0.011217] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 03:48:48.985671 [ 0.011225] CPU: All CPU(s) started in HYP mode. Oct 3 03:48:48.985671 [ 0.011229] CPU: Virtualization extensions available. Oct 3 03:48:48.997661 [ 0.011847] devtmpfs: initialized Oct 3 03:48:48.997661 [ 0.023227] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 03:48:49.009658 [ 0.023463] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 03:48:49.009658 [ 0.023488] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 03:48:49.021660 [ 0.024006] pinctrl core: initialized pinctrl subsystem Oct 3 03:48:49.021660 [ 0.024704] DMI not present or invalid. Oct 3 03:48:49.033670 [ 0.025374] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 03:48:49.033670 [ 0.030746] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 03:48:49.045670 [ 0.032291] audit: initializing netlink subsys (disabled) Oct 3 03:48:49.045670 [ 0.032495] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 Oct 3 03:48:49.057669 [ 0.033652] thermal_sys: Registered thermal governor 'fair_share' Oct 3 03:48:49.057669 [ 0.033659] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 03:48:49.069663 [ 0.033664] thermal_sys: Registered thermal governor 'step_wise' Oct 3 03:48:49.069663 [ 0.033668] thermal_sys: Registered thermal governor 'user_space' Oct 3 03:48:49.081668 [ 0.033673] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 03:48:49.081668 [ 0.034048] No ATAGs? Oct 3 03:48:49.093658 [ 0.034114] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 03:48:49.093658 [ 0.034123] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 03:48:49.105666 [ 0.035202] Serial: AMBA PL011 UART driver Oct 3 03:48:49.105666 [ 0.084689] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 03:48:49.117704 [ 0.091706] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 03:48:49.129702 [ 0.102720] iommu: Default domain type: Translated Oct 3 03:48:49.129702 [ 0.102729] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 03:48:49.129702 [ 0.103703] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 03:48:49.141767 [ 0.104238] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 03:48:49.141833 [ 0.104250] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 03:48:49.153757 [ 0.104784] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 03:48:49.165746 [ 0.104815] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 03:48:49.165818 [ 0.104995] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 03:48:49.177708 [ 0.105347] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 03:48:49.177758 [ 0.105357] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 03:48:49.189754 [ 0.105753] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 03:48:49.189816 [ 0.106041] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 03:48:49.189864 [ 0.106051] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 03:48:49.201763 [ 0.106329] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 03:48:49.201861 [ 0.106428] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 03:48:49.213758 [ 0.106438] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 03:48:49.213821 [ 0.106638] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 03:48:49.225762 [ 0.106832] pps_core: LinuxPPS API ver. 1 registered Oct 3 03:48:49.225824 [ 0.106838] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 03:48:49.237759 [ 0.106854] PTP clock support registered Oct 3 03:48:49.237817 [ 0.108496] NetLabel: Initializing Oct 3 03:48:49.249730 [ 0.108503] NetLabel: domain hash size = 128 Oct 3 03:48:49.249736 [ 0.108508] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 03:48:49.249736 [ 0.108563] NetLabel: unlabeled traffic allowed by default Oct 3 03:48:49.261780 [ 0.108748] vgaarb: loaded Oct 3 03:48:49.261845 [ 0.109395] clocksource: Switched to clocksource mct-frc Oct 3 03:48:49.261898 [ 0.110026] VFS: Disk quotas dquot_6.6.0 Oct 3 03:48:49.273771 [ 0.110114] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 03:48:49.273836 [ 0.110857] AppArmor: AppArmor Filesystem Enabled Oct 3 03:48:49.285757 [ 0.120872] NET: Registered PF_INET protocol family Oct 3 03:48:49.285819 [ 0.121095] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 03:48:49.297772 [ 0.122707] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 03:48:49.297841 [ 0.122811] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 03:48:49.309785 [ 0.122837] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 03:48:49.321783 [ 0.122937] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 03:48:49.321846 [ 0.123169] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 03:48:49.333772 [ 0.123403] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 03:48:49.345754 [ 0.123513] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 03:48:49.345819 [ 0.123554] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 03:48:49.357764 [ 0.123751] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 03:48:49.357827 [ 0.123787] NET: Registered PF_XDP protocol family Oct 3 03:48:49.369712 [ 0.123801] PCI: CLS 0 bytes, default 64 Oct 3 03:48:49.369732 [ 0.124914] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 03:48:49.369732 [ 0.125172] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 03:48:49.381802 [ 0.129755] Trying to unpack rootfs image as initramfs... Oct 3 03:48:49.393764 [ 0.182969] Initialise system trusted keyrings Oct 3 03:48:49.393824 [ 0.183054] Key type blacklist registered Oct 3 03:48:49.393870 [ 0.183523] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 03:48:49.405776 [ 0.190615] zbud: loaded Oct 3 03:48:49.405833 [ 0.194407] integrity: Platform Keyring initialized Oct 3 03:48:49.405881 [ 0.194436] integrity: Machine keyring initialized Oct 3 03:48:49.417756 [ 0.194444] Key type asymmetric registered Oct 3 03:48:49.417816 [ 0.194451] Asymmetric key parser 'x509' registered Oct 3 03:48:49.429757 [ 1.505420] Freeing initrd memory: 25724K Oct 3 03:48:49.429817 [ 1.516802] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 03:48:49.429868 [ 1.517113] bounce: pool size: 64 pages Oct 3 03:48:49.441803 [ 1.517281] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 03:48:49.441872 [ 1.517487] io scheduler mq-deadline registered Oct 3 03:48:49.453762 [ 1.522602] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 03:48:49.453833 [ 1.543206] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 03:48:49.465764 [ 1.543219] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 03:48:49.477769 [ 1.545499] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 03:48:49.477837 [ 1.545509] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 03:48:49.489759 [ 1.546372] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 03:48:49.501766 [ 1.546381] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 03:48:49.513769 [ 1.547191] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 03:48:49.513859 [ 1.547200] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 03:48:49.525760 [ 1.549523] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 03:48:49.537764 [ 1.552388] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 03:48:49.537827 [ 1.555168] Serial: AMBA driver Oct 3 03:48:49.549764 [ 1.555389] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 03:48:49.549804 [ 1.555870] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 03:48:49.561762 [ 1.556360] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 03:48:49.573732 [ 2.694465] printk: console [ttySAC2] enabled Oct 3 03:48:49.573732 [ 2.699340] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 03:48:49.585747 [ 2.709953] STM32 USART driver initialized Oct 3 03:48:49.585806 [ 2.724111] mousedev: PS/2 mouse device common for all mice Oct 3 03:48:49.609720 [ 2.755398] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 03:48:49.633663 [ 2.764021] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T03:48:52 UTC (1727927332) Oct 3 03:48:49.645791 [ 2.773846] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 03:48:49.657762 [ 2.781261] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 03:48:49.657826 [ 2.789253] NET: Registered PF_INET6 protocol family Oct 3 03:48:49.669723 [ 2.802941] Segment Routing with IPv6 Oct 3 03:48:49.681784 [ 2.805184] In-situ OAM (IOAM) with IPv6 Oct 3 03:48:49.681844 [ 2.809143] mip6: Mobile IPv6 Oct 3 03:48:49.693769 [ 2.812021] NET: Registered PF_PACKET protocol family Oct 3 03:48:49.693832 [ 2.817149] mpls_gso: MPLS GSO support Oct 3 03:48:49.693878 [ 2.821375] ThumbEE CPU extension supported. Oct 3 03:48:49.705790 [ 2.825053] Registering SWP/SWPB emulation handler Oct 3 03:48:49.705852 [ 2.830297] registered taskstats version 1 Oct 3 03:48:49.705898 [ 2.833908] Loading compiled-in X.509 certificates Oct 3 03:48:49.717688 [ 3.294411] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 03:48:50.173786 [ 3.301737] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 03:48:50.185771 [ 3.312698] zswap: loaded using pool lzo/zbud Oct 3 03:48:50.197690 [ 3.316754] Key type .fscrypt registered Oct 3 03:48:50.197723 [ 3.320070] Key type fscrypt-provisioning registered Oct 3 03:48:50.197749 [ 3.333764] Key type encrypted registered Oct 3 03:48:50.209673 [ 3.336312] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 03:48:50.221795 [ 3.341907] ima: No TPM chip found, activating TPM-bypass! Oct 3 03:48:50.221858 [ 3.347286] ima: Allocated hash algorithm: sha256 Oct 3 03:48:50.233698 [ 3.351987] ima: No architecture policies found Oct 3 03:48:50.233698 [ 3.356532] evm: Initialising EVM extended attributes: Oct 3 03:48:50.233698 [ 3.361582] evm: security.selinux Oct 3 03:48:50.245715 [ 3.364861] evm: security.SMACK64 (disabled) Oct 3 03:48:50.245715 [ 3.369132] evm: security.SMACK64EXEC (disabled) Oct 3 03:48:50.245715 [ 3.373730] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 03:48:50.257642 [ 3.378765] evm: security.SMACK64MMAP (disabled) Oct 3 03:48:50.257642 [ 3.383365] evm: security.apparmor Oct 3 03:48:50.257642 [ 3.386751] evm: security.ima Oct 3 03:48:50.269670 [ 3.389708] evm: security.capability Oct 3 03:48:50.269670 [ 3.393245] evm: HMAC attrs: 0x1 Oct 3 03:48:50.269670 [ 3.981122] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 03:48:50.857641 [ 3.987147] clk: Disabling unused clocks Oct 3 03:48:50.869604 [ 4.000847] Freeing unused kernel image (initmem) memory: 2048K Oct 3 03:48:50.881658 [ 4.005740] Checked W+X mappings: passed, no W+X pages found Oct 3 03:48:50.881658 [ 4.010984] Run /init as init process Oct 3 03:48:50.893605 [ 4.542309] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 03:48:51.421607 [ 4.621684] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 03:48:51.505586 [ 4.643685] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 03:48:51.529615 [ 4.657228] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 03:48:51.541594 [ 4.674967] usbcore: registered new interface driver usbfs Oct 3 03:48:51.553601 [ 4.695347] usbcore: registered new interface driver hub Oct 3 03:48:51.577618 [ 4.699334] usbcore: registered new device driver usb Oct 3 03:48:51.577618 [ 4.726737] phy phy-12130000.phy.3: phy_power_on was called before phy_init Oct 3 03:48:51.613627 [ 4.732279] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 03:48:51.613627 [ 4.744054] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 03:48:51.625604 [ 4.761247] phy phy-12130000.phy.3: phy_power_on was called before phy_init Oct 3 03:48:51.637701 [ 4.761532] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Oct 3 03:48:51.649758 [ 4.784063] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Oct 3 03:48:51.661713 [ 4.792242] exynos-ohci 12120000.usb: USB Host Controller Oct 3 03:48:51.673734 [ 4.821470] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Oct 3 03:48:51.709639 [ 4.841455] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 03:48:51.721659 [ 4.846383] usb3503 usb-hub: switched to HUB mode Oct 3 03:48:51.721659 [ 4.847314] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Oct 3 03:48:51.733748 [ 4.850737] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 03:48:51.733789 [ 4.863536] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 03:48:51.745666 [ 4.870795] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 03:48:51.757661 [ 4.877965] usb usb1: Product: EHCI Host Controller Oct 3 03:48:51.757661 [ 4.882820] usb usb1: Manufacturer: Linux 6.1.0-25-armmp ehci_hcd Oct 3 03:48:51.769628 [ 4.888901] usb usb1: SerialNumber: 12110000.usb Oct 3 03:48:51.769628 [ 4.905452] hub 1-0:1.0: USB hub found Oct 3 03:48:51.781616 [ 4.913704] hub 1-0:1.0: 3 ports detected Oct 3 03:48:51.793628 [ 4.925164] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 03:48:51.805664 [ 4.932003] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 03:48:51.817674 [ 4.939201] usb usb2: Product: USB Host Controller Oct 3 03:48:51.817674 [ 4.943968] usb usb2: Manufacturer: Linux 6.1.0-25-armmp ohci_hcd Oct 3 03:48:51.829659 [ 4.950054] usb usb2: SerialNumber: 12120000.usb Oct 3 03:48:51.829659 [ 4.957081] hub 2-0:1.0: USB hub found Oct 3 03:48:51.841647 [ 4.960391] hub 2-0:1.0: 3 ports detected Oct 3 03:48:51.841675 [ 5.169466] usb 1-3: new high-speed USB device number 2 using exynos-ehci Oct 3 03:48:52.045769 [ 5.192752] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 03:48:52.069775 [ 5.196814] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 03:48:52.081786 [ 5.204927] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 03:48:52.093785 [ 5.213854] xhci-hcd xhci-hcd.2.auto: irq 108, io mem 0x12000000 Oct 3 03:48:52.093847 [ 5.220022] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 03:48:52.105775 [ 5.225270] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 03:48:52.105844 [ 5.232910] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 03:48:52.117771 [ 5.239573] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 03:48:52.129676 [ 5.247668] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 03:48:52.129676 [ 5.254881] usb usb3: Product: xHCI Host Controller Oct 3 03:48:52.141756 [ 5.259719] usb usb3: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 03:48:52.141824 [ 5.265793] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 03:48:52.141872 [ 5.271858] hub 3-0:1.0: USB hub found Oct 3 03:48:52.153766 [ 5.274518] hub 3-0:1.0: 1 port detected Oct 3 03:48:52.153825 [ 5.279325] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 03:48:52.165776 [ 5.286521] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 03:48:52.165846 [ 5.294623] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 03:48:52.177783 [ 5.301824] usb usb4: Product: xHCI Host Controller Oct 3 03:48:52.177843 [ 5.306679] usb usb4: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 03:48:52.189776 [ 5.312752] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 03:48:52.189837 [ 5.318755] hub 4-0:1.0: USB hub found Oct 3 03:48:52.201719 [ 5.321354] hub 4-0:1.0: 1 port detected Oct 3 03:48:52.201778 [ 5.362416] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Oct 3 03:48:52.249781 [ 5.369812] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 3 03:48:52.249847 [ 5.377012] hub 1-3:1.0: USB hub found Oct 3 03:48:52.261594 [ 5.386897] hub 1-3:1.0: 3 ports detected Oct 3 03:48:52.261627 Starting system log daemon: syslogd, klogd. Oct 3 03:48:52.357677 /var/run/utmp: No such file or directory Oct 3 03:48:54.205630 [?1h=(B   Oct 3 03:48:54.253757  Oct 3 03:48:54.253836 [  (-*) ][ Oct 03  3:48 ] Oct 3 03:48:54.265693 [  (0*start) ][ Oct 03  3:48 ] Oct 3 03:48:54.281624 [  (0*start) ][ Oct 03  3:48 ] Oct 3 03:48:54.293701 [  (0*start) ][ Oct 03  3:48 ] Oct 3 03:48:54.305551 [  (0*start) ][ Oct 03  3:48 ]                        [  (0*start) ][ Oct 03  3:48 ][  (0*start) ][ Oct 03  3:48 ] Oct 3 03:48:54.361675 [ 0- start  (2*shell) ][ Oct 03  3:48 ] Oct 3 03:48:54.373515 [ 0- start  (2*shell) ][ Oct 03  3:48 ] Oct 3 03:48:54.397517 [ 0- start  (2*shell) ][ Oct 03  3:48 ] Oct 3 03:48:54.409640 [ 0- start  (2*shell) ][ Oct 03  3:48 ]                        [ 0- start  (2*shell) ][ Oct 03  3:48 ][ 0- start  (2*shell) ][ Oct 03  3:48 ] Oct 3 03:48:54.457514 [ 0 start 2- shell  (3*shell) ][ Oct 03  3:48 ] Oct 3 03:48:54.481542 [ 0 start 2- shell  (3*shell) ][ Oct 03  3:48 ] Oct 3 03:48:54.493510 [ 0 start 2- shell  (3*shell) ][ Oct 03  3:48 ] Oct 3 03:48:54.505522 [ 0 start 2- shell  (3*shell) ][ Oct 03  3:48 ]                        [ 0 start 2- shell  (3*shell) ][ Oct 03  3:48 ][ 0 start 2- shell  (3*shell) ][ Oct 03  3:48 ] Oct 3 03:48:54.565516 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  3:48 ] Oct 3 03:48:54.577643 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  3:48 ] Oct 3 03:48:54.589547 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  3:48 ] Oct 3 03:48:54.601530 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  3:48 ]                        [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  3:48 ][ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  3:48 ] Oct 3 03:48:54.661516 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  3:48 ] Oct 3 03:48:54.673511 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  3:48 ] Oct 3 03:48:54.685532 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  3:48 ] Oct 3 03:48:54.697559 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  3:48 ]                        [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  3:48 ][ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  3:48 ] Oct 3 03:48:54.757625 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  3:48 ] Oct 3 03:48:54.769660 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  3:48 ] Oct 3 03:48:54.781602 [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  3:48 ] Oct 3 03:48:55.241608 Detecting network hardware ... 2%... 95%... 100% Oct 3 03:48:56.969706 [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  3:49 ] Oct 3 03:48:57.245734 Oct 3 03:48:57.245770 Detecting link on eth0; please wait... ... 0%... 10%... 20% Oct 3 03:49:01.865703 Waiting for link-local address... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 100% Oct 3 03:49:03.917703 Attempting IPv6 autoconfiguration... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 75%... 83%... 91%... 100% Oct 3 03:49:10.001720 Configuring the network with DHCP ... 0%... 100% Oct 3 03:49:13.157756 Checking the Debian archive mirror ... 25%... 50%... 75%... 100% Oct 3 03:49:21.357780 Loading additional components ... 0%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Oct 3 03:49:54.345593 Setting up the clock ... 0%... 100% Oct 3 03:49:57.069593 Loading additional components ... 50%... 100% Oct 3 03:49:58.741718 Detecting disks and all other hardware [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  3:50 ]... 2%... 95%... 100% Oct 3 03:50:03.349803 Loading additional components ... 12%... 25%... 37%... 50%... 62%... 75%... 87%... 100% Oct 3 03:50:10.397630 Loading additional components ... 25%... 50%... 75%... 100% Oct 3 03:50:12.761807 Starting up the partitioner ... 4%... 13%... 21%... 30%... 43%... 52%... 60%... 73%... 82%... 91%... 100% Oct 3 03:50:25.977760 Guided partitioning ... 16%... 33%... 50%... 66%... 83%... 100% Oct 3 03:50:34.153661 Starting up the partitioner ... 4%... 12%... 20%... 32%... 40%... 52%... 60%... 72%... 80%... 92%... 100% Oct 3 03:50:45.029726 Partitions formatting ... 33% Oct 3 03:50:53.813708 Partitions formatting [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  3:51 ] Partitions formatting Installing the base system ... 0%... 17%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  3:52 ]... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  3:53 ]... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  3:54 ]... 48%... 50%...  Oct 3 03:54:53.493789  60%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  3:55 ]... 70%... 79%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  3:56 ]... 83%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  3:57 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  3:58 ]... 91%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  3:59 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  4:00 ]... 100% Oct 3 04:00:34.665802 Configuring apt ... 7%... 14%... 14%... 21%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  4:01 ]... 35%... 42%... 50%... 60%... 71%. Oct 3 04:01:11.877750 ... 82%... 92%... 100% Oct 3 04:01:14.457601 Select and install software ... 1%... 10%... 13%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  4:02 ]... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  4:03 ]... 40%... 50%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  4:04 ]... Oct 3 04:04:05.705625 . 60%... 70%... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  4:05 ]... 88%... 90%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  4:06 ]... 94%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  4:07 ]... 100% Oct 3 04:07:11.981696 Finishing the installation ... 4%... 12%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  4:08 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  4:09 ]... 16%... 20%... 32%... 40%... 44%... Oct 3 04:09:24.325686  52%... 60%... 72%... 80%... 92% The system is going down NOW! Sent SIGKILL to all processes Oct 3 04:09:35.500805 Requesting system reboot Oct 3 04:09:35.500805 [ 1249.656762] reboot: Reó Oct 3 04:09:36.860823 Oct 3 04:09:36.860823 Oct 3 04:09:36.861071 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 04:09:36.861128 Oct 3 04:09:36.861177 CPU: Exynos5250@1000MHz Oct 3 04:09:36.861191 Oct 3 04:09:36.861191 Board: Arndale Oct 3 04:09:36.872812 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 04:09:36.872812 ready Oct 3 04:09:36.872812 DRAM: 2 GiB Oct 3 04:09:36.872812 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 04:09:36.896768 trace: enabled Oct 3 04:09:36.932783 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 04:09:37.285008 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 04:09:37.344845 In: serial Oct 3 04:09:37.344845 Out: serial Oct 3 04:09:37.344845 Err: serial Oct 3 04:09:37.356847 SCSI: ARNDALE SCSI INIT Oct 3 04:09:37.356847 Target spinup took 0 ms. Oct 3 04:09:37.356847 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 04:09:37.368883 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 04:09:37.368883 Net: Net Initialization Skipped Oct 3 04:09:37.368883 No ethernet found. Oct 3 04:09:37.380819 Hostname: arndale-westfield Oct 3 04:09:37.380819 Hit any key to stop autoboot: 2  1  0 Oct 3 04:09:39.296957 (Re)start USB... Oct 3 04:09:39.297024 USB0: USB EHCI 1.00 Oct 3 04:09:39.308817 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 04:09:44.909740 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 04:09:44.909784 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 04:09:45.353716 Waiting for Ethernet connection... done. Oct 3 04:09:46.952809 BOOTP broadcast 1 Oct 3 04:09:46.952809 BOOTP broadcast 2 Oct 3 04:09:49.116968 DHCP client bound to address 10.149.64.45 (2255 ms) Oct 3 04:09:49.117048 Using asx0 device Oct 3 04:09:49.129000 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 04:09:49.129062 Filename 'pxelinux.0'. Oct 3 04:09:49.129105 Load address: 0x43e00000 Oct 3 04:09:49.129147 Loading: *### Oct 3 04:09:49.164966 1.1 MiB/s Oct 3 04:09:49.165021 done Oct 3 04:09:49.176953 Bytes transferred = 42430 (a5be hex) Oct 3 04:09:49.177012 missing environment variable: pxeuuid Oct 3 04:09:49.177057 Retrieving file: pxelinux.cfg/0A95402D Oct 3 04:09:49.177102 Using asx0 device Oct 3 04:09:49.177141 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 04:09:49.188858 Filename 'pxelinux.cfg/0A95402D'. Oct 3 04:09:49.188858 Load address: 0x51000000 Oct 3 04:09:49.188858 Loading: *# Oct 3 04:09:49.188858 31.3 KiB/s Oct 3 04:09:49.200881 done Oct 3 04:09:49.200881 Bytes transferred = 65 (41 hex) Oct 3 04:09:49.200881 Config file found Oct 3 04:09:49.200881 Ignoring unknown command: serial Oct 3 04:09:49.200881 1: local Oct 3 04:09:49.200881 scanning bus for devices... Oct 3 04:09:49.212659 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 04:09:49.236803 Type: Hard Disk Oct 3 04:09:49.236803 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 04:09:49.236803 Found 1 device(s). Oct 3 04:09:49.236803 Oct 3 04:09:49.236803 SCSI device 0: Oct 3 04:09:49.248854 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 04:09:49.248854 Type: Hard Disk Oct 3 04:09:49.248854 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 04:09:49.260837 ... is now current device Oct 3 04:09:49.260837 Scanning scsi 0... Oct 3 04:09:49.260837 Found U-Boot script /boot.scr Oct 3 04:09:49.371216 639 bytes read in 42 ms (14.6 KiB/s) Oct 3 04:09:49.420846 ## Executing script at 50000000 Oct 3 04:09:49.420846 Loading dtbs/exynos5250-arndale.dtb Oct 3 04:09:49.432813 46686 bytes read in 1142 ms (39.1 KiB/s) Oct 3 04:09:50.548844 Loading vmlinuz-6.1.0-25-armmp-lpae Oct 3 04:09:50.548844 5509632 bytes read in 186 ms (28.2 MiB/s) Oct 3 04:09:50.752845 Loading initrd.img-6.1.0-25-armmp-lpae Oct 3 04:09:50.752845 25732510 bytes read in 1899 ms (12.9 MiB/s) Oct 3 04:09:52.596871 Booting Oct 3 04:09:52.596871 Kernel image @ 0x42000000 [ 0x000000 - 0x541200 ] Oct 3 04:09:52.596871 ## Flattened Device Tree blob at 43000000 Oct 3 04:09:52.608863 Booting using the fdt blob at 0x43000000 Oct 3 04:09:52.608863 Loading Ramdisk to 4e775000, end 4ffff59e ... OK Oct 3 04:09:53.021767 Loading Device Tree to 4e766000, end 4e77465d ... OK Oct 3 04:09:53.021837 Oct 3 04:09:53.033727 Starting kernel ...(fake run for tracing) Oct 3 04:09:53.033788 Oct 3 04:09:53.033826 Oct 3 04:09:53.033875 Starting kernel ... Oct 3 04:09:53.048923 Oct 3 04:09:53.048987 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 04:09:59.201042 [ 0.000000] Linux version 6.1.0-25-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.106-3 (2024-08-26) Oct 3 04:09:59.213003 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=30c5387d Oct 3 04:09:59.225142 [ 0.000000] CPU: div instructions available: patching division code Oct 3 04:09:59.237114 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 04:09:59.237180 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 04:09:59.249113 [ 0.000000] Memory policy: Data cache writealloc Oct 3 04:09:59.249173 [ 0.000000] efi: UEFI not found. Oct 3 04:09:59.249219 [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000 Oct 3 04:09:59.261139 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 04:09:59.261199 [ 0.000000] Zone ranges: Oct 3 04:09:59.261280 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 04:09:59.273002 [ 0.000000] Normal empty Oct 3 04:09:59.273060 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 04:09:59.284884 [ 0.000000] Movable zone start for each node Oct 3 04:09:59.284884 [ 0.000000] Early memory node ranges Oct 3 04:09:59.285146 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 04:09:59.296878 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 04:09:59.296878 [ 0.000000] percpu: Embedded 18 pages/cpu s44820 r8192 d20716 u73728 Oct 3 04:09:59.308881 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 04:09:59.320877 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=ttySAC2,115200n8 Oct 3 04:09:59.320877 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 04:09:59.332860 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 04:09:59.344877 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 04:09:59.344877 [ 0.000000] Memory: 2015504K/2097152K available (12288K kernel code, 1717K rwdata, 3748K rodata, 2048K init, 383K bss, 65264K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 04:09:59.368864 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 04:09:59.368864 [ 0.000000] ftrace: allocating 39996 entries in 118 pages Oct 3 04:09:59.381009 [ 0.000000] ftrace: allocated 118 pages with 5 groups Oct 3 04:09:59.381009 [ 0.000000] trace event string verifier disabled Oct 3 04:09:59.381009 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 04:09:59.393036 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 04:09:59.393107 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 04:09:59.405074 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 04:09:59.405074 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 04:09:59.417017 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 04:09:59.417080 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 04:09:59.429010 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 04:09:59.429073 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 04:09:59.441016 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 04:09:59.441074 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 04:09:59.453016 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 04:09:59.453126 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 04:09:59.465010 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 04:09:59.477002 [ 0.002626] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 04:09:59.477116 [ 0.002640] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 04:09:59.489065 [ 0.002655] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 04:09:59.501052 [ 0.002667] Ignoring duplicate/late registration of read_current_timer delay Oct 3 04:09:59.501052 [ 0.003034] Console: colour dummy device 80x30 Oct 3 04:09:59.513003 [ 0.003077] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 04:09:59.524994 [ 0.003091] CPU: Testing write buffer coherency: ok Oct 3 04:09:59.525055 [ 0.003133] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 04:09:59.536998 [ 0.003141] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 04:09:59.537029 [ 0.003147] pid_max: default: 32768 minimum: 301 Oct 3 04:09:59.548994 [ 0.003515] LSM: Security Framework initializing Oct 3 04:09:59.549101 [ 0.003587] landlock: Up and running. Oct 3 04:09:59.549151 [ 0.003591] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 04:09:59.561030 [ 0.003777] AppArmor: AppArmor initialized Oct 3 04:09:59.561109 [ 0.003790] TOMOYO Linux initialized Oct 3 04:09:59.573033 [ 0.003835] LSM support for eBPF active Oct 3 04:09:59.573056 [ 0.004083] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 04:09:59.573056 [ 0.004098] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 04:09:59.585010 [ 0.005505] /cpus/cpu@0 missing clock-frequency property Oct 3 04:09:59.597007 [ 0.005533] /cpus/cpu@1 missing clock-frequency property Oct 3 04:09:59.597072 [ 0.005547] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 04:09:59.597144 [ 0.006501] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 04:09:59.609006 [ 0.006508] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 04:09:59.621028 [ 0.006610] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 04:09:59.621110 [ 0.006615] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 04:09:59.633027 [ 0.006755] Setting up static identity map for 0x40400000 - 0x404000ac Oct 3 04:09:59.633122 [ 0.007916] rcu: Hierarchical SRCU implementation. Oct 3 04:09:59.645005 [ 0.007922] rcu: Max phase no-delay instances is 1000. Oct 3 04:09:59.645074 [ 0.010058] EFI services will not be available. Oct 3 04:09:59.645074 [ 0.010400] smp: Bringing up secondary CPUs ... Oct 3 04:09:59.657019 [ 0.011140] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 04:09:59.657120 [ 0.011152] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 04:09:59.669014 [ 0.011292] smp: Brought up 1 node, 2 CPUs Oct 3 04:09:59.669123 [ 0.011301] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 04:09:59.681004 [ 0.011308] CPU: All CPU(s) started in HYP mode. Oct 3 04:09:59.681116 [ 0.011312] CPU: Virtualization extensions available. Oct 3 04:09:59.693007 [ 0.012157] devtmpfs: initialized Oct 3 04:09:59.693079 [ 0.023146] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 04:09:59.705026 [ 0.023375] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 04:09:59.705111 [ 0.023399] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 04:09:59.717013 [ 0.023934] pinctrl core: initialized pinctrl subsystem Oct 3 04:09:59.717103 [ 0.024683] DMI not present or invalid. Oct 3 04:09:59.729041 [ 0.025356] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 04:09:59.729113 [ 0.026898] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 04:09:59.741024 [ 0.028416] audit: initializing netlink subsys (disabled) Oct 3 04:09:59.741102 [ 0.028617] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 Oct 3 04:09:59.753012 [ 0.029800] thermal_sys: Registered thermal governor 'fair_share' Oct 3 04:09:59.753139 [ 0.029807] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 04:09:59.765034 [ 0.029812] thermal_sys: Registered thermal governor 'step_wise' Oct 3 04:09:59.765120 [ 0.029817] thermal_sys: Registered thermal governor 'user_space' Oct 3 04:09:59.777013 [ 0.029821] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 04:09:59.777122 [ 0.030020] No ATAGs? Oct 3 04:09:59.789016 [ 0.030088] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 04:09:59.789090 [ 0.030096] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 04:09:59.801115 [ 0.031179] Serial: AMBA PL011 UART driver Oct 3 04:09:59.801180 [ 0.080632] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 04:09:59.813004 [ 0.087586] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 04:09:59.824999 [ 0.091792] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages Oct 3 04:09:59.825065 [ 0.091800] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page Oct 3 04:09:59.837020 [ 0.099320] iommu: Default domain type: Translated Oct 3 04:09:59.837082 [ 0.099328] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 04:09:59.848983 [ 0.100304] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 04:09:59.849048 [ 0.100814] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 04:09:59.849097 [ 0.100825] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 04:09:59.860998 [ 0.101339] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 04:09:59.873022 [ 0.101368] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 04:09:59.873094 [ 0.101615] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 04:09:59.885027 [ 0.102107] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 04:09:59.885088 [ 0.102118] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 04:09:59.896977 [ 0.102496] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 04:09:59.897039 [ 0.102793] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 04:09:59.908981 [ 0.102803] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 04:09:59.909045 [ 0.103097] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 04:09:59.920997 [ 0.103238] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 04:09:59.921061 [ 0.103247] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 04:09:59.921112 [ 0.103431] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 04:09:59.933163 [ 0.103649] pps_core: LinuxPPS API ver. 1 registered Oct 3 04:09:59.933221 [ 0.103654] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 04:09:59.944977 [ 0.103671] PTP clock support registered Oct 3 04:09:59.945036 [ 0.105169] NetLabel: Initializing Oct 3 04:09:59.956963 [ 0.105175] NetLabel: domain hash size = 128 Oct 3 04:09:59.957024 [ 0.105180] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 04:09:59.957074 [ 0.105235] NetLabel: unlabeled traffic allowed by default Oct 3 04:09:59.969122 [ 0.105408] vgaarb: loaded Oct 3 04:09:59.969174 [ 0.106321] clocksource: Switched to clocksource mct-frc Oct 3 04:09:59.980948 [ 0.106904] VFS: Disk quotas dquot_6.6.0 Oct 3 04:09:59.981009 [ 0.106987] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 04:09:59.981060 [ 0.107814] AppArmor: AppArmor Filesystem Enabled Oct 3 04:09:59.992977 [ 0.117733] NET: Registered PF_INET protocol family Oct 3 04:09:59.993038 [ 0.117951] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 04:10:00.005275 [ 0.119572] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 04:10:00.016951 [ 0.119672] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 04:10:00.017042 [ 0.119697] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 04:10:00.028978 [ 0.119794] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 04:10:00.029045 [ 0.120026] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 04:10:00.041135 [ 0.120263] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 04:10:00.052958 [ 0.120349] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 04:10:00.053022 [ 0.120389] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 04:10:00.064967 [ 0.120633] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 04:10:00.065031 [ 0.120671] NET: Registered PF_XDP protocol family Oct 3 04:10:00.076971 [ 0.120682] PCI: CLS 0 bytes, default 64 Oct 3 04:10:00.077031 [ 0.121172] Trying to unpack rootfs image as initramfs... Oct 3 04:10:00.077080 [ 0.121526] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 04:10:00.089133 [ 0.126909] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 04:10:00.101148 [ 0.194625] Initialise system trusted keyrings Oct 3 04:10:00.101204 [ 0.194729] Key type blacklist registered Oct 3 04:10:00.101288 [ 0.195931] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 04:10:00.112984 [ 0.203897] zbud: loaded Oct 3 04:10:00.113041 [ 0.206841] integrity: Platform Keyring initialized Oct 3 04:10:00.125139 [ 0.206875] integrity: Machine keyring initialized Oct 3 04:10:00.125201 [ 0.206885] Key type asymmetric registered Oct 3 04:10:00.125280 [ 0.206893] Asymmetric key parser 'x509' registered Oct 3 04:10:00.137157 [ 1.422239] Freeing initrd memory: 25132K Oct 3 04:10:00.137217 [ 1.444373] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 04:10:00.149382 [ 1.444642] bounce: pool size: 64 pages Oct 3 04:10:00.149439 [ 1.444832] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 04:10:00.149495 [ 1.444985] io scheduler mq-deadline registered Oct 3 04:10:00.161103 [ 1.450091] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 04:10:00.172964 [ 1.471070] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 04:10:00.173035 [ 1.471082] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 04:10:00.185064 [ 1.473369] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 04:10:00.196967 [ 1.473379] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 04:10:00.197040 [ 1.474170] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 04:10:00.209047 [ 1.474179] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 04:10:00.220997 [ 1.475054] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 04:10:00.221067 [ 1.475062] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 04:10:00.233014 [ 1.477369] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 04:10:00.245017 [ 1.480222] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 04:10:00.245081 [ 1.483001] Serial: AMBA driver Oct 3 04:10:00.257022 [ 1.483225] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 04:10:00.257095 [ 1.483702] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 04:10:00.269051 [ 1.484187] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 04:10:00.281076 [ 2.564919] printk: console [ttySAC2] enabled Oct 3 04:10:00.281139 [ 2.569726] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 04:10:00.293058 [ 2.580396] STM32 USART driver initialized Oct 3 04:10:00.293120 [ 2.594830] mousedev: PS/2 mouse device common for all mice Oct 3 04:10:00.316920 [ 2.626071] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 04:10:00.340967 [ 2.634698] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T04:10:00 UTC (1727928600) Oct 3 04:10:00.353042 [ 2.644550] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 04:10:00.365026 [ 2.652005] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 04:10:00.376937 [ 2.660042] NET: Registered PF_INET6 protocol family Oct 3 04:10:00.377001 [ 2.684216] Segment Routing with IPv6 Oct 3 04:10:00.400977 [ 2.686501] In-situ OAM (IOAM) with IPv6 Oct 3 04:10:00.401037 [ 2.690417] mip6: Mobile IPv6 Oct 3 04:10:00.413123 [ 2.693281] NET: Registered PF_PACKET protocol family Oct 3 04:10:00.413187 [ 2.698454] mpls_gso: MPLS GSO support Oct 3 04:10:00.413283 [ 2.702496] ThumbEE CPU extension supported. Oct 3 04:10:00.425143 [ 2.706296] Registering SWP/SWPB emulation handler Oct 3 04:10:00.425143 [ 2.711550] registered taskstats version 1 Oct 3 04:10:00.425143 [ 2.715206] Loading compiled-in X.509 certificates Oct 3 04:10:00.436930 [ 3.176995] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 04:10:00.897023 [ 3.184364] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 04:10:00.909026 [ 3.195422] zswap: loaded using pool lzo/zbud Oct 3 04:10:00.909113 [ 3.199325] Key type .fscrypt registered Oct 3 04:10:00.920966 [ 3.202670] Key type fscrypt-provisioning registered Oct 3 04:10:00.921033 [ 3.227032] Key type encrypted registered Oct 3 04:10:00.945098 [ 3.229577] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 04:10:00.945159 [ 3.235119] ima: No TPM chip found, activating TPM-bypass! Oct 3 04:10:00.957046 [ 3.240563] ima: Allocated hash algorithm: sha256 Oct 3 04:10:00.957126 [ 3.245269] ima: No architecture policies found Oct 3 04:10:00.969039 [ 3.249811] evm: Initialising EVM extended attributes: Oct 3 04:10:00.969115 [ 3.254856] evm: security.selinux Oct 3 04:10:00.969115 [ 3.258126] evm: security.SMACK64 (disabled) Oct 3 04:10:00.981101 [ 3.262399] evm: security.SMACK64EXEC (disabled) Oct 3 04:10:00.981168 [ 3.266995] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 04:10:00.981217 [ 3.272028] evm: security.SMACK64MMAP (disabled) Oct 3 04:10:00.993004 [ 3.276628] evm: security.apparmor Oct 3 04:10:00.993064 [ 3.280013] evm: security.ima Oct 3 04:10:00.993109 [ 3.282964] evm: security.capability Oct 3 04:10:01.004906 [ 3.286530] evm: HMAC attrs: 0x1 Oct 3 04:10:01.004965 [ 3.874441] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 04:10:01.593020 [ 3.880386] clk: Disabling unused clocks Oct 3 04:10:01.593081 [ 3.893278] Freeing unused kernel image (initmem) memory: 2048K Oct 3 04:10:01.617039 [ 3.898154] Checked W+X mappings: passed, no W+X pages found Oct 3 04:10:01.617103 [ 3.903406] Run /init as init process Oct 3 04:10:01.617150 Loading, please wait... Oct 3 04:10:01.652874 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 04:10:01.724923 [ 4.847849] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 04:10:02.568967 [ 4.861108] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 04:10:02.580985 [ 4.883806] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 04:10:02.605035 [ 4.892652] usbcore: registered new interface driver usbfs Oct 3 04:10:02.616966 [ 4.910432] usbcore: registered new interface driver hub Oct 3 04:10:02.629001 [ 4.914916] usbcore: registered new device driver usb Oct 3 04:10:02.629086 [ 4.923706] phy phy-12130000.phy.2: phy_power_on was called before phy_init Oct 3 04:10:02.641010 [ 4.929626] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 04:10:02.653029 [ 4.934784] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Oct 3 04:10:02.653089 [ 4.947219] Synopsys Designware Multimedia Card Interface Driver Oct 3 04:10:02.665009 [ 4.957593] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Oct 3 04:10:02.676989 [ 4.972632] phy phy-12130000.phy.2: phy_power_on was called before phy_init Oct 3 04:10:02.689039 [ 4.992714] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 04:10:02.713129 [ 4.993977] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 04:10:02.713199 [ 4.997307] exynos-ohci 12120000.usb: USB Host Controller Oct 3 04:10:02.725031 [ 5.005624] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 04:10:02.725068 [ 5.025716] SCSI subsystem initialized Oct 3 04:10:02.736901 [ 5.031840] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 04:10:02.748952 [ 5.038665] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 04:10:02.761005 [ 5.045854] usb usb1: Product: EHCI Host Controller Oct 3 04:10:02.761066 [ 5.050713] usb usb1: Manufacturer: Linux 6.1.0-25-armmp-lpae ehci_hcd Oct 3 04:10:02.773041 [ 5.057223] usb usb1: SerialNumber: 12110000.usb Oct 3 04:10:02.773102 [ 5.062999] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 04:10:02.785045 [ 5.068281] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 04:10:02.785108 [ 5.073755] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 04:10:02.797008 [ 5.080077] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 04:10:02.797072 [ 5.087899] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 109,32 bit host data width,128 deep fifo Oct 3 04:10:02.809004 [ 5.096506] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 04:10:02.820888 [ 5.101069] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo Oct 3 04:10:02.820929 [ 5.114002] mmc_host mmc1: card is polling. Oct 3 04:10:02.832874 [ 5.122394] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 04:10:02.845006 [ 5.130815] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 04:10:02.856793 [ 5.154723] hub 1-0:1.0: USB hub found Oct 3 04:10:02.868820 [ 5.163129] hub 1-0:1.0: 3 ports detected Oct 3 04:10:02.880753 [ 5.190925] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Oct 3 04:10:02.908759 [ 5.202693] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Oct 3 04:10:02.920705 [ 5.223202] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 04:10:02.944759 [ 5.232427] mmc0: new high speed SDHC card at address aaaa Oct 3 04:10:02.956760 [ 5.239490] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 04:10:02.956760 [ 5.263289] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 04:10:02.980826 [ 5.270218] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 04:10:02.990953 [ 5.279763] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 04:10:03.004797 [ 5.287175] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 04:10:03.004797 [ 5.294334] usb usb2: Product: USB Host Controller Oct 3 04:10:03.016785 [ 5.299104] usb usb2: Manufacturer: Linux 6.1.0-25-armmp-lpae ohci_hcd Oct 3 04:10:03.016785 [ 5.305620] usb usb2: SerialNumber: 12120000.usb Oct 3 04:10:03.028873 [ 5.311046] hub 2-0:1.0: USB hub found Oct 3 04:10:03.028873 [ 5.313975] hub 2-0:1.0: 3 ports detected Oct 3 04:10:03.028873 [ 5.324884] mmcblk0: mmc0:aaaa SU04G 3.69 GiB Oct 3 04:10:03.040874 [ 5.355001] mmc1: new DDR MMC card at address 0001 Oct 3 04:10:03.076752 [ 5.379863] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 04:10:03.100745 [ 5.408919] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 04:10:03.124736 [ 5.414578] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Oct 3 04:10:03.136784 [ 5.423401] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 04:10:03.148733 [ 5.447098] mmcblk1: mmc1:0001 M4G1FB 3.64 GiB Oct 3 04:10:03.160712 [ 5.460449] mmcblk1: p1 p2 p3 p4 Oct 3 04:10:03.172782 [ 5.463928] mmcblk1boot0: mmc1:0001 M4G1FB 1.00 MiB Oct 3 04:10:03.184823 [ 5.467655] scsi host0: ahci-dwc Oct 3 04:10:03.184823 [ 5.471227] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 110 Oct 3 04:10:03.196855 [ 5.471485] mmcblk1boot1: mmc1:0001 M4G1FB 1.00 MiB Oct 3 04:10:03.196855 [ 5.488146] mmcblk1rpmb: mmc1:0001 M4G1FB 128 KiB, chardev (241:0) Oct 3 04:10:03.208833 [ 5.669769] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 04:10:03.389013 [ 5.740533] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 04:10:03.461041 [ 5.848997] I/O error, dev mmcblk0, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 04:10:03.568998 [ 5.954390] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 04:10:03.677044 [ 5.956994] I/O error, dev mmcblk0, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 04:10:03.677118 [ 5.968607] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 04:10:03.689067 [ 5.975091] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 04:10:03.701032 [ 5.982654] ata1.00: configured for UDMA/133 Oct 3 04:10:03.701093 [ 5.986281] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 04:10:03.713002 [ 6.061063] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 04:10:03.777066 [ 6.065175] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 04:10:03.789136 [ 6.072775] I/O error, dev mmcblk0, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 04:10:03.801049 [ 6.082646] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 04:10:03.801122 [ 6.091492] xhci-hcd xhci-hcd.2.auto: irq 111, io mem 0x12000000 Oct 3 04:10:03.813020 [ 6.101254] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 04:10:03.825051 [ 6.105365] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 04:10:03.825121 [ 6.112977] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 04:10:03.837068 [ 6.119652] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 04:10:03.837140 [ 6.127722] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 04:10:03.849040 [ 6.134890] usb usb3: Product: xHCI Host Controller Oct 3 04:10:03.849101 [ 6.139746] usb usb3: Manufacturer: Linux 6.1.0-25-armmp-lpae xhci-hcd Oct 3 04:10:03.861126 [ 6.146265] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 04:10:03.861186 [ 6.154991] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 04:10:03.873115 [ 6.161080] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 04:10:03.885020 [ 6.161927] hub 3-0:1.0: USB hub found Oct 3 04:10:03.885080 [ 6.168542] sd 0:0:0:0: [sda] Write Protect is off Oct 3 04:10:03.885129 [ 6.170076] hub 3-0:1.0: 1 port detected Oct 3 04:10:03.896895 [ 6.178758] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 04:10:03.896895 [ 6.179361] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 04:10:03.908781 [ 6.188358] I/O error, dev mmcblk0, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 04:10:03.920800 [ 6.195999] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 04:10:03.932840 [ 6.205275] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 04:10:03.932840 [ 6.213312] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 04:10:03.944872 [ 6.226771] usb usb4: Product: xHCI Host Controller Oct 3 04:10:03.944872 [ 6.231626] usb usb4: Manufacturer: Linux 6.1.0-25-armmp-lpae xhci-hcd Oct 3 04:10:03.956040 [ 6.238130] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 04:10:03.956107 [ 6.243774] hub 4-0:1.0: USB hub found Oct 3 04:10:03.956153 [ 6.246780] hub 4-0:1.0: 1 port detected Oct 3 04:10:03.968814 [ 6.252959] sda: sda1 sda2 < sda5 > Oct 3 04:10:03.968814 [ 6.257338] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 04:10:03.980785 [ 6.305172] I/O error, dev mmcblk0, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 04:10:04.032756 [ 6.413137] I/O error, dev mmcblk0, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 04:10:04.140808 [ 6.521104] I/O error, dev mmcblk0, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 04:10:04.248797 [ 6.629159] I/O error, dev mmcblk0, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 04:10:04.356801 [ 7.037672] I/O error, dev mmcblk0, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 04:10:04.764906 [ 7.145280] I/O error, dev mmcblk0, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 04:10:04.872849 [ 7.274343] random: crng init done Oct 3 04:10:04.984805 [ 7.383239] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. Oct 3 04:10:05.104874 [ 7.394070] device-mapper: uevent: version 1.0.3 Oct 3 04:10:05.116851 [ 7.398814] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Oct 3 04:10:05.116851 [ 7.753362] Buffer I/O error on dev mmcblk0, logical block 968056, async page read Oct 3 04:10:05.476805 Begin: Loading essential drivers ... done. Oct 3 04:10:05.740810 Begin: Running /scripts/init-premount ... done. Oct 3 04:10:08.748896 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 04:10:08.757602 Begin: Running /scripts/local-premount ... done. Oct 3 04:10:08.832720 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 04:10:08.879049 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 04:10:08.987474 /dev/mapper/arndale--westfield--vg-root: clean, 39343/1220608 files, 378259/4882432 blocks Oct 3 04:10:09.190257 done. Oct 3 04:10:09.202511 [ 11.618019] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 04:10:09.336005 [ 11.815398] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 04:10:09.539708 done. Oct 3 04:10:09.541232 Begin: Running /scripts/local-bottom ... done. Oct 3 04:10:09.587945 Begin: Running /scripts/init-bottom ... done. Oct 3 04:10:09.624182 [ 12.163554] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. Oct 3 04:10:09.886988 INIT: version 3.06 booting Oct 3 04:10:10.140010 INIT: No inittab.d directory found Oct 3 04:10:10.235516 Using makefile-style concurrent boot in runlevel S. Oct 3 04:10:10.581243 Starting hotplug events dispatcher: systemd-udevd. Oct 3 04:10:12.160812 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 04:10:12.416801 Synthesizing the initial hotplug events (devices)...done. Oct 3 04:10:12.920813 Waiting for /dev to be fully populated...[ 15.416196] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 04:10:13.136831 [ 15.459350] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Oct 3 04:10:13.184804 [ 15.526452] panfrost 11800000.gpu: clock rate = 533000000 Oct 3 04:10:13.244833 [ 15.574736] panfrost 11800000.gpu: mali-t600 id 0x600 major 0x0 minor 0x0 status 0x1 Oct 3 04:10:13.292870 [ 15.581054] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,31b4dfff Oct 3 04:10:13.304969 [ 15.589195] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 Oct 3 04:10:13.316819 [ 15.600915] panfrost 11800000.gpu: shader_present=0xf l2_present=0x1 Oct 3 04:10:13.316819 [ 15.647231] sd 0:0:0:0: Attached scsi generic sg0 type 0 Oct 3 04:10:13.364968 [ 15.682777] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 0 Oct 3 04:10:13.400842 [ 15.774372] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 04:10:13.496830 [ 15.843069] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 04:10:13.560935 [ 15.870400] usb3503 usb-hub: switched to HUB mode Oct 3 04:10:13.584849 [ 15.873651] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 04:10:13.596814 [ 15.952631] blk_print_req_error: 6 callbacks suppressed Oct 3 04:10:13.668841 [ 15.952645] I/O error, dev mmcblk0, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 04:10:13.680794 [ 16.066093] I/O error, dev mmcblk0, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 04:10:13.788832 [ 16.174546] I/O error, dev mmcblk0, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 04:10:13.896843 [ 16.206417] usb 1-3: new high-speed USB device number 2 using exynos-ehci Oct 3 04:10:13.920825 [ 16.282867] I/O error, dev mmcblk0, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 04:10:14.004937 [ 16.386792] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Oct 3 04:10:14.112873 [ 16.393600] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 3 04:10:14.112873 [ 16.400685] I/O error, dev mmcblk0, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 04:10:14.124846 [ 16.416382] hub 1-3:1.0: USB hub found Oct 3 04:10:14.136837 [ 16.422047] hub 1-3:1.0: 3 ports detected Oct 3 04:10:14.136837 [ 16.510132] I/O error, dev mmcblk0, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 04:10:14.232773 [ 16.618239] I/O error, dev mmcblk0, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 04:10:14.340819 [ 16.645858] OF: graph: no port node found in /soc/hdmi@14530000 Oct 3 04:10:14.364836 [ 16.710432] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 04:10:14.424799 [ 16.726403] I/O error, dev mmcblk0, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 04:10:14.448829 [ 16.832347] usb 1-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=77.32 Oct 3 04:10:14.556875 [ 16.839851] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Oct 3 04:10:14.556875 [ 16.846979] usb 1-3.2: Product: USB2.0 Hub Oct 3 04:10:14.568926 [ 16.863428] hub 1-3.2:1.0: USB hub found Oct 3 04:10:14.580829 [ 16.869616] hub 1-3.2:1.0: 4 ports detected Oct 3 04:10:14.592762 [ 17.156327] I/O error, dev mmcblk0, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 04:10:14.872811 [ 17.174558] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 04:10:14.896825 [ 17.264480] I/O error, dev mmcblk0, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 04:10:14.980858 [ 17.304790] usb 1-3.2.4: New USB device found, idVendor=0b95, idProduct=772a, bcdDevice= 0.01 Oct 3 04:10:15.028877 [ 17.312179] usb 1-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Oct 3 04:10:15.028877 [ 17.319601] usb 1-3.2.4: Product: AX88772 Oct 3 04:10:15.040875 [ 17.323612] usb 1-3.2.4: Manufacturer: ASIX Elec. Corp. Oct 3 04:10:15.040875 [ 17.328852] usb 1-3.2.4: SerialNumber: 000001 Oct 3 04:10:15.052796 [ 17.873867] Buffer I/O error on dev mmcblk0, logical block 968056, async page read Oct 3 04:10:15.596838 [ 17.887389] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 04:10:15.608837 [ 18.580986] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 04:10:16.304853 [ 18.596538] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Oct 3 04:10:16.316946 [ 18.608386] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 7a:41:d1:89:af:6f Oct 3 04:10:16.328872 [ 18.626728] usbcore: registered new interface driver asix Oct 3 04:10:16.340833 done. Oct 3 04:10:16.644796 [ 19.397316] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 04:10:17.120937 Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). Oct 3 04:10:17.156845 Checking file systems.../dev/sda1: clean, 922/61056 files, 25402/243968 blocks Oct 3 04:10:18.520816 done. Oct 3 04:10:18.568806 Cleaning up temporary files... /tmp. Oct 3 04:10:18.832781 [ 21.310651] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 04:10:19.024811 [ 21.359406] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 04:10:19.084749 [ 21.567477] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k FS Oct 3 04:10:19.288790 Mounting local filesystems...done. Oct 3 04:10:19.768844 Activating swapfile swap, if any...done. Oct 3 04:10:19.768844 Cleaning up temporary files.... Oct 3 04:10:19.844989 Starting Setting kernel variables: sysctl. Oct 3 04:10:20.024816 [ 22.938569] audit: type=1400 audit(1727928620.692:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=894 comm="apparmor_parser" Oct 3 04:10:20.661065 [ 22.975135] audit: type=1400 audit(1727928620.728:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=895 comm="apparmor_parser" Oct 3 04:10:20.709011 [ 22.992715] audit: type=1400 audit(1727928620.744:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=895 comm="apparmor_parser" Oct 3 04:10:20.721019 [ 23.150655] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 04:10:20.865025 [ 23.366936] audit: type=1400 audit(1727928621.120:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=937 comm="apparmor_parser" Oct 3 04:10:21.092857 [ 23.386406] audit: type=1400 audit(1727928621.136:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=937 comm="apparmor_parser" Oct 3 04:10:21.116892 [ 23.399905] audit: type=1400 audit(1727928621.136:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=937 comm="apparmor_parser" Oct 3 04:10:21.128963 [ 23.725842] audit: type=1400 audit(1727928621.476:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=936 comm="apparmor_parser" Oct 3 04:10:21.452849 [ 23.749354] audit: type=1400 audit(1727928621.496:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=936 comm="apparmor_parser" Oct 3 04:10:21.476851 [ 23.765244] audit: type=1400 audit(1727928621.500:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=936 comm="apparmor_parser" Oct 3 04:10:21.500833 [ 23.782780] audit: type=1400 audit(1727928621.508:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=943 comm="apparmor_parser" Oct 3 04:10:21.513004 Starting: AppArmorLoading AppArmor profiles...done. Oct 3 04:10:21.980848 . Oct 3 04:10:21.980848 [ 25.319936] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 04:10:23.048512 [ 25.320050] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 3 04:10:23.048565 Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1 Oct 3 04:10:25.241754 Copyright 2004-2022 Internet Systems Consortium. Oct 3 04:10:25.241798 All rights reserved. Oct 3 04:10:25.241825 For info, please visit https://www.isc.org/software/dhcp/ Oct 3 04:10:25.253713 Oct 3 04:10:25.253741 Listening on LPF/eth0/a6:46:13:77:e8:2f Oct 3 04:10:25.253767 Sending on LPF/eth0/a6:46:13:77:e8:2f Oct 3 04:10:25.253791 Sending on Socket/fallback Oct 3 04:10:25.265710 Created duid "\000\001\000\001.\220\325\254\246F\023w\350/". Oct 3 04:10:25.265744 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 Oct 3 04:10:25.277636 [ 28.641728] exynos-mixer 14450000.mixer: deferred probe timeout, ignoring dependency Oct 3 04:10:26.360967 [ 28.652247] exynos4-fb 14400000.fimd: deferred probe timeout, ignoring dependency Oct 3 04:10:26.372906 [ 28.660304] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations Oct 3 04:10:26.384886 [ 28.666657] exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm]) Oct 3 04:10:26.384919 [ 28.675085] exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm]) Oct 3 04:10:26.396971 [ 28.684713] exynos-drm exynos-drm: bound 14500000.dsi (ops hdmi_enable [exynosdrm]) Oct 3 04:10:26.408983 [ 28.691489] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm]) Oct 3 04:10:26.409020 [ 28.700562] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 04:10:26.420916 [ 28.706890] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 04:10:26.420950 [ 28.717828] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 Oct 3 04:10:26.432926 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 Oct 3 04:10:28.941761 DHCPOFFER of 10.149.64.45 from 10.149.64.4 Oct 3 04:10:28.941835 DHCPREQUEST for 10.149.64.45 on eth0 to 255.255.255.255 port 67 Oct 3 04:10:28.953680 DHCPACK of 10.149.64.45 from 10.149.64.4 Oct 3 04:10:28.953724 bound to 10.149.64.45 -- renewal in 281 seconds. Oct 3 04:10:28.953764 done. Oct 3 04:10:28.953800 Cleaning up temporary files.... Oct 3 04:10:29.001692 Starting nftables: none Oct 3 04:10:29.061634 . Oct 3 04:10:29.469597 INIT: Entering runlevel: 2 Oct 3 04:10:29.517605 Using makefile-style concurrent boot in runlevel 2. Oct 3 04:10:29.565620 Starting Apache httpd web server: apache2. Oct 3 04:10:31.525601 Starting NTP server: ntpd2024-10-03T04:10:31 ntpd[1134]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 04:10:31.901796 2024-10-03T04:10:31 ntpd[1134]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 04:10:31.913704 . Oct 3 04:10:31.913755 Starting periodic command scheduler: cron. Oct 3 04:10:31.949724 Starting system message bus: dbus. Oct 3 04:10:32.261728 Starting OpenBSD Secure Shell server: sshd. Oct 3 04:10:32.777720 Oct 3 04:10:33.821716 Debian GNU/Linux 12 arndale-westfield ttySAC2 Oct 3 04:10:33.833700 Oct 3 04:10:33.833751 arndale-westfield login: INIT: Switching to r INIT: No initUsing makefile-style concurrent boot in runlevel 6. Oct 3 04:15:48.953782 Stopping SMP IRQ Balancer: irqbalance. Oct 3 04:15:49.025708 Stopping nftables: none. Oct 3 04:15:49.037702 Stopping hotplug events dispatcher: systemd-udevd. Oct 3 04:15:49.049735 Saving the system clock to /dev/rtc0. Oct 3 04:15:50.045806 Hardware Clock updated to Thu Oct 3 04:15:50 UTC 2024. Oct 3 04:15:50.045867 Stopping Apache httpd web server: apache2. Oct 3 04:15:50.177742 Asking all remaining processes to terminate...done. Oct 3 04:15:50.525755 All processes ended within 1 seconds...done. Oct 3 04:15:50.537772 Deconfiguring network interfaces...ifdown: ignoring unknown interface eth0=eth0 Oct 3 04:15:50.657826 done. Oct 3 04:15:50.657879 [ 353.168047] EXT4-fs (sda1): unmounting filesystem. Oct 3 04:15:50.885583 Deactivating swap...done. Oct 3 04:15:50.945725 Unmounting local filesystems...done. Oct 3 04:15:50.945783 [ 353.502285] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 04:15:51.213001 Will now restart. Oct 3 04:15:51.525800 [ 353.836534] asix 1-3.2.4:1.0 eth0: Link is Down Oct 3 04:15:51.549850 [ 353.903279] sd 0:0:0:0: [sda] Synchronizing SCSI cache Oct 3 04:15:51.609788 [ 353.911356] wake enabled for irq 101 (gpx1-4) Oct 3 04:15:51.621687 [ 353.914246] wake enabled for irq 102 (gpx1-5) Oct 3 04:15:51.621773 [ 353.918607] wake enabled for irq 103 (gpx1-6) Oct 3 04:15:51.633798 [ 353.922940] wake enabled for irq 104 (gpx1-7) Oct 3 04:15:51.633858 [ 353.927280] wake enabled for irq 105 (gpx2-0) Oct 3 04:15:51.645761 [ 353.931620] wake enabled for irq 106 (gpx2-1) Oct 3 04:15:51.645823 [ 353.936480] reboot: Reű Oct 3 04:15:51.981730 Oct 3 04:15:51.981784 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 04:15:51.981835 Oct 3 04:15:51.981874 CPU: Exynos5250@1000MHz Oct 3 04:15:51.993802 Oct 3 04:15:51.993854 Board: Arndale Oct 3 04:15:51.993895 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 04:15:51.993943 ready Oct 3 04:15:51.993981 DRAM: 2 GiB Oct 3 04:15:51.994021 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 04:15:52.017759 trace: enabled Oct 3 04:15:52.053741 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 04:15:52.413737 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 04:15:52.473923 In: serial Oct 3 04:15:52.473978 Out: serial Oct 3 04:15:52.474020 Err: serial Oct 3 04:15:52.474059 SCSI: ARNDALE SCSI INIT Oct 3 04:15:52.474101 Target spinup took 0 ms. Oct 3 04:15:52.485782 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 04:15:52.485852 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 04:15:52.485912 Net: Net Initialization Skipped Oct 3 04:15:52.497725 No ethernet found. Oct 3 04:15:52.497790 Hostname: arndale-westfield Oct 3 04:15:52.497841 Hit any key to stop autoboot: 2  1  0 Oct 3 04:15:54.417800 (Re)start USB... Oct 3 04:15:54.417864 USB0: USB EHCI 1.00 Oct 3 04:15:54.429816 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 04:16:00.029059 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 04:16:00.029134 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 04:16:00.472846 Waiting for Ethernet connection... done. Oct 3 04:16:02.073001 BOOTP broadcast 1 Oct 3 04:16:02.085006 BOOTP broadcast 2 Oct 3 04:16:03.732860 DHCP client bound to address 10.149.64.45 (1724 ms) Oct 3 04:16:03.732860 Using asx0 device Oct 3 04:16:03.732860 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 04:16:03.744885 Filename 'pxelinux.0'. Oct 3 04:16:03.744885 Load address: 0x43e00000 Oct 3 04:16:03.744885 Loading: *### Oct 3 04:16:03.769005 2.2 MiB/s Oct 3 04:16:03.769005 done Oct 3 04:16:03.769005 Bytes transferred = 42430 (a5be hex) Oct 3 04:16:03.769005 missing environment variable: pxeuuid Oct 3 04:16:03.769005 Retrieving file: pxelinux.cfg/0A95402D Oct 3 04:16:03.780944 Using asx0 device Oct 3 04:16:03.780944 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 04:16:03.780944 Filename 'pxelinux.cfg/0A95402D'. Oct 3 04:16:03.780944 Load address: 0x51000000 Oct 3 04:16:03.792884 Loading: *# Oct 3 04:16:03.792884 31.3 KiB/s Oct 3 04:16:03.792884 done Oct 3 04:16:03.792884 Bytes transferred = 65 (41 hex) Oct 3 04:16:03.792884 Config file found Oct 3 04:16:03.792884 Ignoring unknown command: serial Oct 3 04:16:03.804846 1: local Oct 3 04:16:03.804846 scanning bus for devices... Oct 3 04:16:03.804846 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 04:16:03.840881 Type: Hard Disk Oct 3 04:16:03.840881 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 04:16:03.840881 Found 1 device(s). Oct 3 04:16:03.840881 Oct 3 04:16:03.840881 SCSI device 0: Oct 3 04:16:03.852897 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 04:16:03.852897 Type: Hard Disk Oct 3 04:16:03.852897 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 04:16:03.864866 ... is now current device Oct 3 04:16:03.864866 Scanning scsi 0... Oct 3 04:16:03.864866 Found U-Boot script /boot.scr Oct 3 04:16:04.044834 1755 bytes read in 45 ms (38.1 KiB/s) Oct 3 04:16:04.092897 ## Executing script at 50000000 Oct 3 04:16:04.092897 Loading dtbs/6.1.112+/exynos5250-arndale.dtb Oct 3 04:16:04.104820 46686 bytes read in 1327 ms (34.2 KiB/s) Oct 3 04:16:05.393840 1015824 bytes read in 127 ms (7.6 MiB/s) Oct 3 04:16:05.541829 Loaded xen-4.20-unstable to 0x41000000 (f8010) Oct 3 04:16:05.541897 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan sched=credit Oct 3 04:16:05.553873 10039808 bytes read in 419 ms (22.9 MiB/s) Oct 3 04:16:05.973758 Loaded vmlinuz-6.1.112+ to 0x42000000 (993200) Oct 3 04:16:05.985744 command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 04:16:05.997798 12059097 bytes read in 637 ms (18.1 MiB/s) Oct 3 04:16:06.633784 Loaded initrd.img-6.1.112+ to 0x43300000 (b801d9) Oct 3 04:16:06.633849 chosen { Oct 3 04:16:06.645828 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan sched=credit"; Oct 3 04:16:06.657814 #size-cells = <0x00000001>; Oct 3 04:16:06.657872 #address-cells = <0x00000001>; Oct 3 04:16:06.657917 stdout-path = "serial2:115200n8"; Oct 3 04:16:06.657962 module@1 { Oct 3 04:16:06.658002 reg = <0x43300000 0x00b801d9>; Oct 3 04:16:06.669889 compatible = "xen,linux-initrd", "xen,multiboot-module"; Oct 3 04:16:06.669950 }; Oct 3 04:16:06.669991 module@0 { Oct 3 04:16:06.670030 bootargs = "ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Oct 3 04:16:06.693676 reg = <0x42000000 0x00993200>; Oct 3 04:16:06.693708 compatible = "xen,linux-zimage", "xen,multiboot-module"; Oct 3 04:16:06.693735 }; Oct 3 04:16:06.693756 }; Oct 3 04:16:06.693776 Booting 0x41000000 - 0x43000000 Oct 3 04:16:06.705769 Kernel image @ 0x41000000 [ 0x000000 - 0x135000 ] Oct 3 04:16:06.705830 ## Flattened Device Tree blob at 43000000 Oct 3 04:16:06.705877 Booting using the fdt blob at 0x43000000 Oct 3 04:16:06.717670 reserving fdt memory region: addr=43000000 size=c000 Oct 3 04:16:06.717704 Loading Device Tree to 4fff1000, end 4fffffff ... OK Oct 3 04:16:06.717731 Oct 3 04:16:06.729716 Starting kernel ...(fake run for tracing) Oct 3 04:16:06.729777 Oct 3 04:16:06.729817 Oct 3 04:16:06.729854 Starting kernel ... Oct 3 04:16:06.729894 Oct 3 04:16:06.729932 __ __ _ _ ____ ___ _ _ _ Oct 3 04:16:06.789871 \ \/ /___ _ __ | || | |___ \ / _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Oct 3 04:16:06.789935 \ // _ \ '_ \ | || |_ __) | | | |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Oct 3 04:16:06.801775 / \ __/ | | | |__ _| / __/| |_| |__| |_| | | | \__ \ || (_| | |_) | | __/ Oct 3 04:16:06.801839 /_/\_\___|_| |_| |_|(_)_____|\___/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Oct 3 04:16:06.813776 Oct 3 04:16:06.813828 (XEN) Xen version 4.20-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Thu Oct 3 01:24:04 UTC 2024 Oct 3 04:16:06.825779 (XEN) Latest ChangeSet: Tue Oct 1 13:00:13 2024 +0100 git:633ee8b2df-dirty Oct 3 04:16:06.837789 (XEN) build-id: acdae48e9eb1245e5b7f31d344adf979e897cb42 Oct 3 04:16:06.837853 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Oct 3 04:16:06.849784 (XEN) 32-bit Execution: Oct 3 04:16:06.849816 (XEN) Processor Features: 00001031:00011011 Oct 3 04:16:06.849874 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Oct 3 04:16:06.861773 (XEN) Extensions: GenericTimer Security Oct 3 04:16:06.861834 (XEN) Debug Features: 02010555 Oct 3 04:16:06.861879 (XEN) Auxiliary Features: 00000000 Oct 3 04:16:06.861923 (XEN) Memory Model Features: 10201105 20000000 Oct 3 04:16:06.873676 (XEN) 01240000 02102211 Oct 3 04:16:06.873708 (XEN) ISA Features: 02101110 13112111 21232041 Oct 3 04:16:06.873734 (XEN) 11112131 10011142 00000000 Oct 3 04:16:06.885676 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Oct 3 04:16:06.897680 (XEN) Set SYSRAM to 0000000041000070 (00200070) Oct 3 04:16:06.897712 (XEN) SMP: Allowing 2 CPUs Oct 3 04:16:06.897736 (XEN) enabled workaround for: ARM erratum 766422 Oct 3 04:16:06.909677 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Oct 3 04:16:06.909712 (XEN) GICv2 initialization: Oct 3 04:16:06.909736 (XEN) gic_dist_addr=0000000010481000 Oct 3 04:16:06.921792 (XEN) gic_cpu_addr=0000000010482000 Oct 3 04:16:06.921852 (XEN) gic_hyp_addr=0000000010484000 Oct 3 04:16:06.921898 (XEN) gic_vcpu_addr=0000000010486000 Oct 3 04:16:06.933673 (XEN) gic_maintenance_irq=25 Oct 3 04:16:06.933706 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Oct 3 04:16:06.933732 (XEN) Using scheduler: SMP Credit Scheduler (credit) Oct 3 04:16:06.945790 (XEN) Allocated console ring of 16 KiB. Oct 3 04:16:06.945849 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Oct 3 04:16:06.957815 (XEN) CPU0: Guest atomics will try 1 times before pausing the domain Oct 3 04:16:06.957872 (XEN) Bringing up CPU1 Oct 3 04:16:06.957914 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Oct 3 04:16:06.969839 (XEN) Brought up 2 CPUs Oct 3 04:16:06.969895 (XEN) CPU 1 booted. Oct 3 04:16:06.969938 (XEN) I/O virtualisation disabled Oct 3 04:16:06.969981 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Oct 3 04:16:06.981729 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Oct 3 04:16:06.981791 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Oct 3 04:16:06.993768 (XEN) alternatives: Patching with alt table 002c31f0 -> 002c32c8 Oct 3 04:16:06.993832 (XEN) CPU0 will execute ICIALLU on guest exit Oct 3 04:16:06.993880 (XEN) CPU1 will execute ICIALLU on guest exit Oct 3 04:16:07.005738 (XEN) *** LOADING DOMAIN 0 *** Oct 3 04:16:07.005796 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Oct 3 04:16:07.005845 (XEN) Loading ramdisk from boot module @ 0000000043300000 Oct 3 04:16:07.017797 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Oct 3 04:16:07.017859 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Oct 3 04:16:07.617729 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Oct 3 04:16:07.629876 (XEN) Allocating PPI 16 for event channel interrupt Oct 3 04:16:07.653859 (XEN) d0: extended regions not supported for 32-bit guests Oct 3 04:16:07.665772 (XEN) Loading zImage from 0000000042000000 to 0000000067600000-0000000067f93200 Oct 3 04:16:07.665807 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d801d9 Oct 3 04:16:07.761769 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b4c2 Oct 3 04:16:07.857896 (XEN) Initial low memory virq threshold set at 0x4000 pages. Oct 3 04:16:07.857966 (XEN) Scrubbing Free RAM in background Oct 3 04:16:07.869806 (XEN) Std. Loglevel: All Oct 3 04:16:07.869837 (XEN) Guest Loglevel: All Oct 3 04:16:07.869881 (XEN) *************************************************** Oct 3 04:16:07.869947 (XEN) WARNING: SILO mode is not enabled. Oct 3 04:16:07.881808 (XEN) It has implications on the security of the system, Oct 3 04:16:07.881870 (XEN) unless the communications have been forbidden between Oct 3 04:16:07.893863 (XEN) untrusted domains. Oct 3 04:16:07.893940 (XEN) *************************************************** Oct 3 04:16:07.893987 (XEN) 3... 2... 1... Oct 3 04:16:10.905720 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 04:16:10.905796 (XEN) Freed 384kB init memory. Oct 3 04:16:10.905841 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 04:16:11.969707 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Oct 3 04:16:11.993741 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Oct 3 04:16:11.993804 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Oct 3 04:16:12.005769 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Oct 3 04:16:12.005833 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:16:12.017696 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 04:16:12.053773 [ 0.000000] Linux version 6.1.112+ (osstest@himrod1) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Wed Oct 2 22:15:19 UTC 2024 Oct 3 04:16:12.065803 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 04:16:12.077797 [ 0.000000] CPU: div instructions available: patching division code Oct 3 04:16:12.089767 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 04:16:12.089833 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 04:16:12.101837 [ 0.000000] Memory policy: Data cache writealloc Oct 3 04:16:12.101879 [ 0.000000] Xen 4.20 support found Oct 3 04:16:12.113758 [ 0.000000] efi: UEFI not found. Oct 3 04:16:12.113833 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 Oct 3 04:16:12.113873 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 04:16:12.125697 [ 0.000000] Zone ranges: Oct 3 04:16:12.125744 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Oct 3 04:16:12.125803 [ 0.000000] Normal empty Oct 3 04:16:12.137729 [ 0.000000] HighMem empty Oct 3 04:16:12.137787 [ 0.000000] Movable zone start for each node Oct 3 04:16:12.137835 [ 0.000000] Early memory node ranges Oct 3 04:16:12.137878 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Oct 3 04:16:12.149745 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Oct 3 04:16:12.161775 [ 0.000000] psci: probing for conduit method from DT. Oct 3 04:16:12.161837 [ 0.000000] psci: PSCIv1.1 detected in firmware. Oct 3 04:16:12.161884 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Oct 3 04:16:12.173788 [ 0.000000] psci: Trusted OS migration not required Oct 3 04:16:12.173849 [ 0.000000] psci: SMC Calling Convention v1.2 Oct 3 04:16:12.185762 [ 0.000000] percpu: Embedded 16 pages/cpu s35412 r8192 d21932 u65536 Oct 3 04:16:12.185827 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 Oct 3 04:16:12.197739 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 04:16:12.209750 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 04:16:12.221778 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Oct 3 04:16:12.221847 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Oct 3 04:16:12.233741 [ 0.000000] Memory: 416844K/524288K available (14336K kernel code, 2180K rwdata, 5604K rodata, 2048K init, 438K bss, 41908K reserved, 65536K cma-reserved, 0K highmem) Oct 3 04:16:12.245789 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 04:16:12.257740 [ 0.000000] trace event string verifier disabled Oct 3 04:16:12.257800 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 04:16:12.269742 [ 0.000000] rcu: RCU event tracing is enabled. Oct 3 04:16:12.269803 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Oct 3 04:16:12.281750 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Oct 3 04:16:12.281819 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 04:16:12.293808 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 04:16:12.293871 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 04:16:12.305751 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 04:16:12.305814 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Oct 3 04:16:12.317758 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 04:16:12.329757 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 04:16:12.329828 [ 0.000012] Switching to timer-based delay loop, resolution 41ns Oct 3 04:16:12.341745 [ 0.000497] Console: colour dummy device 80x30 Oct 3 04:16:12.341805 [ 0.293135] printk: console [hvc0] enabled Oct 3 04:16:12.353748 [ 0.297327] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Oct 3 04:16:12.365753 [ 0.307744] CPU: Testing write buffer coherency: ok Oct 3 04:16:12.365816 [ 0.312669] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 04:16:12.377747 [ 0.322222] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 04:16:12.377811 [ 0.328636] pid_max: default: 32768 minimum: 301 Oct 3 04:16:12.389719 [ 0.333429] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 04:16:12.389788 [ 0.340704] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 04:16:12.401752 [ 0.349116] /cpus/cpu@0 missing clock-frequency property Oct 3 04:16:12.401813 [ 0.353907] /cpus/cpu@1 missing clock-frequency property Oct 3 04:16:12.413749 [ 0.359301] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 04:16:12.413812 [ 0.365819] xen:grant_table: Grant tables using version 1 layout Oct 3 04:16:12.425736 [ 0.371153] Grant table initialized Oct 3 04:16:12.425795 [ 0.374691] xen:events: Using FIFO-based ABI Oct 3 04:16:12.425843 [ 0.379009] Xen: initializing cpu0 Oct 3 04:16:12.437734 [ 0.382554] Setting up static identity map for 0x60300000 - 0x603000ac Oct 3 04:16:12.437798 [ 0.390270] rcu: Hierarchical SRCU implementation. Oct 3 04:16:12.449742 [ 0.393923] rcu: Max phase no-delay instances is 1000. Oct 3 04:16:12.449803 [ 0.401990] EFI services will not be available. Oct 3 04:16:12.461703 [ 0.405296] smp: Bringing up secondary CPUs ... Oct 3 04:16:12.461764 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:16:12.533787 [ 0.480101] Xen: initializing cpu1 Oct 3 04:16:12.533845 [ 0.480250] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 04:16:12.545739 [ 0.480279] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 04:16:12.545812 [ 0.499149] smp: Brought up 1 node, 2 CPUs Oct 3 04:16:12.557762 [ 0.502931] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 04:16:12.557826 [ 0.509239] CPU: All CPU(s) started in SVC mode. Oct 3 04:16:12.569662 [ 0.514641] devtmpfs: initialized Oct 3 04:16:12.569714 [ 0.527247] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 04:16:12.581770 [ 0.533734] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Oct 3 04:16:12.593850 [ 0.543456] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 04:16:12.605750 [ 0.551430] pinctrl core: initialized pinctrl subsystem Oct 3 04:16:12.605812 [ 0.558047] DMI not present or invalid. Oct 3 04:16:12.617726 [ 0.561128] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 04:16:12.617791 [ 0.568349] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 04:16:12.629760 [ 0.577133] thermal_sys: Registered thermal governor 'step_wise' Oct 3 04:16:12.629827 [ 0.577264] software IO TLB: area num 2. Oct 3 04:16:12.641752 [ 0.585948] software IO TLB: only able to allocate 8 MB Oct 3 04:16:12.641814 [ 0.593078] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Oct 3 04:16:12.653738 [ 0.598278] No ATAGs? Oct 3 04:16:12.653795 [ 0.600591] hw-breakpoint: Failed to enable monitor mode on CPU 0. Oct 3 04:16:12.653846 [ 0.609157] Serial: AMBA PL011 UART driver Oct 3 04:16:12.665692 [ 0.631266] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 62 Oct 3 04:16:12.689725 [ 0.680697] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 04:16:12.737703 [ 0.715412] xen:balloon: Initialising balloon driver Oct 3 04:16:12.773709 [ 0.722975] iommu: Default domain type: Translated Oct 3 04:16:12.773771 [ 0.726476] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 04:16:12.785697 [ 0.733461] SCSI subsystem initialized Oct 3 04:16:12.785729 [ 0.737074] usbcore: registered new interface driver usbfs Oct 3 04:16:12.797761 [ 0.742219] usbcore: registered new interface driver hub Oct 3 04:16:12.797823 [ 0.747632] usbcore: registered new device driver usb Oct 3 04:16:12.809755 [ 0.754243] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 04:16:12.809817 [ 0.757871] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 04:16:12.821758 [ 0.764173] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 04:16:12.821798 [ 0.772613] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 04:16:12.833773 [ 0.781734] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 04:16:12.833834 [ 0.787268] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 04:16:12.845748 [ 0.791944] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 04:16:12.845811 [ 0.798210] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 04:16:12.857741 [ 0.803417] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 04:16:12.857803 [ 0.808194] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 04:16:12.869751 [ 0.814312] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 04:16:12.869812 [ 0.819493] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 04:16:12.881734 [ 0.824407] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 04:16:12.881798 [ 0.830440] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 04:16:12.881847 [ 0.836250] pps_core: LinuxPPS API ver. 1 registered Oct 3 04:16:12.893757 [ 0.840660] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 04:16:12.905664 [ 0.849850] PTP clock support registered Oct 3 04:16:12.905696 [ 0.868653] EDAC MC: Ver: 3.0.0 Oct 3 04:16:12.917638 [ 0.872741] vgaarb: loaded Oct 3 04:16:12.929706 [ 0.880242] clocksource: Switched to clocksource arch_sys_counter Oct 3 04:16:12.941724 [ 0.891762] NET: Registered PF_INET protocol family Oct 3 04:16:12.941786 [ 0.895404] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Oct 3 04:16:12.953690 [ 0.903325] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 04:16:12.965742 [ 0.911011] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 04:16:12.965810 [ 0.918814] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Oct 3 04:16:12.977864 [ 0.926643] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Oct 3 04:16:12.989834 [ 0.933930] TCP: Hash tables configured (established 4096 bind 4096) Oct 3 04:16:12.989899 [ 0.940294] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 04:16:13.001802 [ 0.946852] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 04:16:13.001868 [ 0.953974] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 04:16:13.013768 [ 0.960045] RPC: Registered named UNIX socket transport module. Oct 3 04:16:13.013832 [ 0.965599] RPC: Registered udp transport module. Oct 3 04:16:13.025669 [ 0.970365] RPC: Registered tcp transport module. Oct 3 04:16:13.025702 [ 0.975123] RPC: Registered tcp NFSv4.1 backchannel transport module. Oct 3 04:16:13.037730 [ 0.981652] PCI: CLS 0 bytes, default 64 Oct 3 04:16:13.037790 [ 0.986968] Initialise system trusted keyrings Oct 3 04:16:13.037838 [ 0.996702] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Oct 3 04:16:13.049667 [ 0.996775] Trying to unpack rootfs image as initramfs... Oct 3 04:16:13.061727 [ 1.009486] squashfs: version 4.0 (2009/01/31) Phillip Lougher Oct 3 04:16:13.061790 [ 1.040897] NFS: Registering the id_resolver key type Oct 3 04:16:13.097765 [ 1.044616] Key type id_resolver registered Oct 3 04:16:13.097827 [ 1.048834] Key type id_legacy registered Oct 3 04:16:13.109721 [ 1.053057] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Oct 3 04:16:13.109787 [ 1.059691] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Oct 3 04:16:13.121685 [ 1.111670] Key type asymmetric registered Oct 3 04:16:13.169746 [ 1.114400] Asymmetric key parser 'x509' registered Oct 3 04:16:13.169807 [ 1.119496] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 04:16:13.181774 [ 1.126858] io scheduler mq-deadline registered Oct 3 04:16:13.181834 [ 1.131441] io scheduler kyber registered Oct 3 04:16:13.181879 [ 1.187620] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 04:16:13.241729 [ 1.290319] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 04:16:13.349759 [ 1.296541] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 04:16:13.361797 [ 1.333664] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 04:16:13.397649 [ 1.339868] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 04:16:13.397741 [ 1.362510] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 04:16:13.421765 [ 1.368712] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 04:16:13.433695 [ 1.401008] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 04:16:13.457799 [ 1.407207] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 04:16:13.469719 [ 1.434932] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 04:16:13.493734 [ 1.485187] xen:xen_evtchn: Event-channel device installed Oct 3 04:16:13.541725 [ 1.565357] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 04:16:13.625718 [ 1.574113] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 113, base_baud = 0) is a S3C6400/10 Oct 3 04:16:13.637768 [ 1.582216] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 114, base_baud = 0) is a S3C6400/10 Oct 3 04:16:13.637839 [ 1.591406] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 115, base_baud = 0) is a S3C6400/10 Oct 3 04:16:13.649787 [ 1.600574] SuperH (H)SCI(F) driver initialized Oct 3 04:16:13.661767 [ 1.605380] STMicroelectronics ASC driver initialized Oct 3 04:16:13.661848 [ 1.610777] STM32 USART driver initialized Oct 3 04:16:13.661898 [ 1.615364] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 04:16:13.673735 [ 1.626048] Freeing initrd memory: 11780K Oct 3 04:16:13.685697 [ 1.636174] brd: module loaded Oct 3 04:16:13.685754 [ 1.642117] loop: module loaded Oct 3 04:16:13.697694 [ 1.657541] Invalid max_queues (4), will use default max: 2. Oct 3 04:16:13.709700 [ 1.684067] tun: Universal TUN/TAP device driver, 1.6 Oct 3 04:16:13.745730 [ 1.687949] CAN device driver interface Oct 3 04:16:13.745791 [ 1.693123] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Oct 3 04:16:13.745841 [ 1.704094] xen_netfront: Initialising Xen virtual ethernet driver Oct 3 04:16:13.757740 [ 1.709001] pegasus: Pegasus/Pegasus II USB Ethernet driver Oct 3 04:16:13.769751 [ 1.714613] usbcore: registered new interface driver pegasus Oct 3 04:16:13.769815 [ 1.720334] usbcore: registered new interface driver asix Oct 3 04:16:13.781783 [ 1.725783] usbcore: registered new interface driver ax88179_178a Oct 3 04:16:13.781846 [ 1.731957] usbcore: registered new interface driver cdc_ether Oct 3 04:16:13.793783 [ 1.737858] usbcore: registered new interface driver smsc75xx Oct 3 04:16:13.793847 [ 1.743700] usbcore: registered new interface driver smsc95xx Oct 3 04:16:13.805738 [ 1.749480] usbcore: registered new interface driver net1080 Oct 3 04:16:13.805801 [ 1.755249] usbcore: registered new interface driver cdc_subset Oct 3 04:16:13.817733 [ 1.761206] usbcore: registered new interface driver zaurus Oct 3 04:16:13.817796 [ 1.766850] usbcore: registered new interface driver cdc_ncm Oct 3 04:16:13.829765 [ 1.776315] usbcore: registered new interface driver usb-storage Oct 3 04:16:13.829829 [ 1.810923] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 04:16:13.865772 [ 1.819769] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T04:16:14 UTC (1727928974) Oct 3 04:16:13.877769 [ 1.828333] i2c_dev: i2c /dev entries driver Oct 3 04:16:13.877827 [ 1.838543] syscon-poweroff 10040000.system-controller:syscon-poweroff: pm_power_off already claimed for psci_sys_poweroff Oct 3 04:16:13.901807 [ 1.848239] syscon-poweroff: probe of 10040000.system-controller:syscon-poweroff failed with error -16 Oct 3 04:16:13.913747 [ 1.859508] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 04:16:13.913812 [ 1.870319] device-mapper: uevent: version 1.0.3 Oct 3 04:16:13.925810 [ 1.873798] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Oct 3 04:16:13.937765 [ 1.882781] cpu cpu0: OPP table can't be empty Oct 3 04:16:13.937825 [ 1.887787] failed to register cpuidle driver Oct 3 04:16:13.937872 [ 1.891036] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Oct 3 04:16:13.949754 [ 1.899287] sdhci: Secure Digital Host Controller Interface driver Oct 3 04:16:13.961780 [ 1.904381] sdhci: Copyright(c) Pierre Ossman Oct 3 04:16:13.961841 [ 1.912405] sdhci-pltfm: SDHCI platform and OF driver helper Oct 3 04:16:13.973778 [ 1.920086] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 04:16:13.973842 [ 1.925436] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Oct 3 04:16:13.985737 [ 1.932032] usbcore: registered new interface driver usbhid Oct 3 04:16:13.985800 [ 1.936866] usbhid: USB HID core driver Oct 3 04:16:13.997727 [ 1.947731] NET: Registered PF_INET6 protocol family Oct 3 04:16:13.997790 [ 1.952395] Segment Routing with IPv6 Oct 3 04:16:14.009742 [ 1.955088] In-situ OAM (IOAM) with IPv6 Oct 3 04:16:14.009801 [ 1.959102] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Oct 3 04:16:14.021829 [ 1.965547] NET: Registered PF_PACKET protocol family Oct 3 04:16:14.021893 [ 1.970176] can: controller area network core Oct 3 04:16:14.021940 [ 1.974662] NET: Registered PF_CAN protocol family Oct 3 04:16:14.033855 [ 1.979445] can: raw protocol Oct 3 04:16:14.033914 [ 1.982520] can: broadcast manager protocol Oct 3 04:16:14.033960 [ 1.986741] can: netlink gateway - max_hops=1 Oct 3 04:16:14.045818 [ 1.991433] Key type dns_resolver registered Oct 3 04:16:14.045878 [ 1.996139] ThumbEE CPU extension supported. Oct 3 04:16:14.057776 [ 1.999848] Registering SWP/SWPB emulation handler Oct 3 04:16:14.057838 [ 2.005217] Loading compiled-in X.509 certificates Oct 3 04:16:14.057887 [ 2.033898] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 04:16:14.093818 [ 2.039976] clk: Not disabling unused clocks Oct 3 04:16:14.093878 [ 2.047024] Freeing unused kernel image (initmem) memory: 2048K Oct 3 04:16:14.105728 [ 2.053170] Run /init as init process Oct 3 04:16:14.105786 Loading, please wait... Oct 3 04:16:14.129734 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 04:16:14.201712 [ 3.491610] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 04:16:15.545747 [ 3.502639] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 04:16:15.557739 [ 3.517484] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 04:16:15.581728 [ 3.529604] phy phy-12130000.phy.8: phy_power_on was called before phy_init Oct 3 04:16:15.581794 [ 3.535234] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 04:16:15.593736 [ 3.540791] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Oct 3 04:16:15.605702 [ 3.562268] Synopsys Designware Multimedia Card Interface Driver Oct 3 04:16:15.617801 [ 3.569946] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 04:16:15.629823 [ 3.576282] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 04:16:15.629888 [ 3.576374] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 04:16:15.641749 [ 3.590057] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 04:16:15.653751 [ 3.597448] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 04:16:15.653820 [ 3.605495] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 04:16:15.665743 [ 3.611436] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 04:16:15.665805 [ 3.616932] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo Oct 3 04:16:15.677748 [ 3.627012] mmc_host mmc0: card is polling. Oct 3 04:16:15.677807 [ 3.632465] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 04:16:15.689745 [ 3.637545] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 04:16:15.689807 [ 3.643194] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 127,32 bit host data width,128 deep fifo Oct 3 04:16:15.701768 [ 3.676668] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 04:16:15.737681 [ 3.696378] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 04:16:15.761739 [ 3.706710] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 04:16:15.761813 [ 3.755665] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 Oct 3 04:16:15.809722 [ 3.768189] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 04:16:15.821748 [ 3.773957] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Oct 3 04:16:15.833759 [ 3.782836] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 04:16:15.845735 [ 3.794160] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 04:16:15.845807 [ 3.813613] hub 1-0:1.0: USB hub found Oct 3 04:16:15.869746 [ 3.816057] hub 1-0:1.0: 3 ports detected Oct 3 04:16:15.869805 [ 3.826265] phy phy-12130000.phy.8: phy_power_on was called before phy_init Oct 3 04:16:15.881776 [ 3.831914] exynos-ohci 12120000.usb: USB Host Controller Oct 3 04:16:15.893667 [ 3.837352] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Oct 3 04:16:15.893705 [ 3.849271] scsi host0: ahci-dwc Oct 3 04:16:15.905751 [ 3.851769] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 128 Oct 3 04:16:15.905821 [ 3.859288] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 Oct 3 04:16:15.917734 [ 3.921726] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 04:16:15.977784 [ 3.935331] mmc1: new high speed SDHC card at address aaaa Oct 3 04:16:15.989697 [ 3.940050] hub 2-0:1.0: USB hub found Oct 3 04:16:15.989751 [ 3.943446] hub 2-0:1.0: 3 ports detected Oct 3 04:16:16.001826 [ 3.950581] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Oct 3 04:16:16.001888 [ 3.960935] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Oct 3 04:16:16.013721 [ 3.967342] s3c-rtc 101e0000.rtc: registered as rtc1 Oct 3 04:16:16.025740 [ 3.973770] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 04:16:16.037806 [ 3.984054] mmc0: new DDR MMC card at address 0001 Oct 3 04:16:16.037888 [ 3.988968] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Oct 3 04:16:16.049729 [ 3.995495] mmcblk0: p1 p2 p3 p4 Oct 3 04:16:16.049788 [ 3.999752] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Oct 3 04:16:16.049837 [ 4.005577] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Oct 3 04:16:16.061754 [ 4.011259] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Oct 3 04:16:16.073660 [ 4.360280] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 04:16:16.421889 [ 4.366089] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 04:16:16.421955 [ 4.372021] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 04:16:16.433739 [ 4.379606] ata1.00: configured for UDMA/133 Oct 3 04:16:16.433773 [ 4.385486] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 04:16:16.445750 [ 4.395975] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 04:16:16.457794 [ 4.402140] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 04:16:16.457855 [ 4.407787] sd 0:0:0:0: [sda] Write Protect is off Oct 3 04:16:16.469846 [ 4.412489] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 04:16:16.469919 [ 4.421570] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 04:16:16.481739 [ 4.441535] sda: sda1 sda2 < sda5 > Oct 3 04:16:16.493720 [ 4.444357] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 04:16:16.505653 [ 4.462701] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 04:16:16.517713 [ 4.513260] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Oct 3 04:16:16.565626 [ 4.520533] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 04:16:16.577646 [ 4.524720] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 04:16:16.589775 [ 4.535170] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 04:16:16.589847 [ 4.544791] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Oct 3 04:16:16.601662 [ 4.549681] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 04:16:16.601696 [ 4.555053] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 04:16:16.613665 [ 4.562805] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 04:16:16.625752 [ 4.570359] hub 3-0:1.0: USB hub found Oct 3 04:16:16.625812 [ 4.573171] hub 3-0:1.0: 1 port detected Oct 3 04:16:16.625859 [ 4.578031] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 04:16:16.637760 [ 4.586466] hub 4-0:1.0: USB hub found Oct 3 04:16:16.637818 [ 4.589126] hub 4-0:1.0: 1 port detected Oct 3 04:16:16.649759 [ 4.593251] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 04:16:16.649834 [ 4.668446] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 04:16:16.733669 [ 4.777062] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 04:16:16.841681 [ 4.885151] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 04:16:16.949682 [ 4.993228] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 04:16:17.057699 [ 5.101321] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 04:16:17.165708 [ 5.209343] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 04:16:17.273673 [ 5.317394] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 04:16:17.381675 [ 5.425509] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 04:16:17.489682 [ 5.533591] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 04:16:17.597715 [ 5.942308] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 04:16:18.005693 [ 6.050027] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 04:16:18.113708 [ 6.658395] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 04:16:18.713747 [ 7.090255] random: crng init done Oct 3 04:16:19.145752 Begin: Loading essential drivers ... done. Oct 3 04:16:19.733620 Begin: Running /scripts/init-premount ... done. Oct 3 04:16:22.745856 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 04:16:22.757753 Begin: Running /scripts/local-premount ... done. Oct 3 04:16:22.769716 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 04:16:22.853733 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 04:16:22.949706 /dev/mapper/arndale--westfield--vg-root: clean, 46040/1220608 files, 634416/4882432 blocks Oct 3 04:16:23.153749 done. Oct 3 04:16:23.165710 [ 11.116345] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 04:16:23.177706 [ 11.459463] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 04:16:23.513824 done. Oct 3 04:16:23.513876 Begin: Running /scripts/local-bottom ... done. Oct 3 04:16:23.573804 Begin: Running /scripts/init-bottom ... done. Oct 3 04:16:23.609676 INIT: version 3.06 booting Oct 3 04:16:24.021727 INIT: No inittab.d directory found Oct 3 04:16:24.093726 Using makefile-style concurrent boot in runlevel S. Oct 3 04:16:24.393683 Starting hotplug events dispatcher: systemd-udevd. Oct 3 04:16:25.909727 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 04:16:26.461521 Synthesizing the initial hotplug events (devices)...[ 14.741653] wm8994 3-001a: Device is not a WM8994, ID is 0 Oct 3 04:16:26.797653 [ 14.747737] wm8994: probe of 3-001a failed with error -22 Oct 3 04:16:26.797867 [ 15.355760] s5p-secss 10830000.sss: s5p-sss driver registered Oct 3 04:16:27.409764 [ 15.391113] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Oct 3 04:16:27.445774 [ 15.416943] mc: Linux media interface: v0.10 Oct 3 04:16:27.469738 [ 15.471645] videodev: Linux video capture interface: v2.00 Oct 3 04:16:27.529725 done. Oct 3 04:16:27.541711 Waiting for /dev to be fully populated...[ 15.556470] s5p-mfc 11000000.codec: Adding to iommu group 0 Oct 3 04:16:27.613652 [ 15.593154] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Oct 3 04:16:27.649655 [ 15.723337] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 04:16:27.781666 [ 15.788663] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 04:16:27.853746 [ 15.795830] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 04:16:27.853819 [ 15.806768] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 04:16:27.865764 [ 15.814876] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 04:16:27.877793 [ 15.826444] exynos-gsc 13e00000.gsc: Adding to iommu group 1 Oct 3 04:16:27.877855 [ 15.840325] s5p-mfc 11000000.codec: decoder registered as /dev/video0 Oct 3 04:16:27.901774 [ 15.860066] s5p-mfc 11000000.codec: encoder registered as /dev/video1 Oct 3 04:16:27.913802 [ 15.864651] exynos-gsc 13e10000.gsc: Adding to iommu group 2 Oct 3 04:16:27.925771 [ 15.871777] exynos-gsc 13e20000.gsc: Adding to iommu group 3 Oct 3 04:16:27.925834 [ 15.878072] exynos-gsc 13e30000.gsc: Adding to iommu group 4 Oct 3 04:16:27.937692 [ 15.906530] blk_print_req_error: 6 callbacks suppressed Oct 3 04:16:27.961770 [ 15.906540] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 04:16:27.973964 [ 15.960302] usb3503 usb-hub: switched to HUB mode Oct 3 04:16:28.009714 [ 15.963648] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 04:16:28.021600 [ 16.019950] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 04:16:28.081621 [ 16.128071] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 04:16:28.189605 [ 16.236202] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 04:16:28.297642 [ 16.266261] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Oct 3 04:16:28.321777 [ 16.330495] usb 1-3: new high-speed USB device number 2 using exynos-ehci Oct 3 04:16:28.393619 [ 16.345333] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 04:16:28.405669 [ 16.454073] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 04:16:28.513697 [ 16.532746] hub 1-3:1.0: USB hub found Oct 3 04:16:28.585685 [ 16.541367] hub 1-3:1.0: 3 ports detected Oct 3 04:16:28.597646 [ 16.562195] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 04:16:28.621700 [ 16.670554] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 04:16:28.729696 [ 16.706436] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 04:16:28.765807 [ 16.714133] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 04:16:28.765885 [ 16.722825] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 04:16:28.777784 [ 16.734183] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 04:16:28.789769 [ 16.742471] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 04:16:28.801774 [ 16.751146] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 04:16:28.813698 [ 16.870303] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 04:16:28.921727 [ 17.033039] hub 1-3.2:1.0: USB hub found Oct 3 04:16:29.089699 [ 17.036007] hub 1-3.2:1.0: 4 ports detected Oct 3 04:16:29.089760 [ 17.079420] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 04:16:29.137726 [ 17.171802] usbcore: registered new device driver onboard-usb-hub Oct 3 04:16:29.221759 [ 17.187219] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 04:16:29.245721 [ 17.291121] hub 1-3.2:1.0: USB hub found Oct 3 04:16:29.341745 [ 17.294065] hub 1-3.2:1.0: 4 ports detected Oct 3 04:16:29.341804 [ 17.305158] hub 1-3.2:1.0: USB hub found Oct 3 04:16:29.353716 [ 17.309760] hub 1-3.2:1.0: 4 ports detected Oct 3 04:16:29.365703 [ 17.520282] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 04:16:29.569743 [ 17.674132] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 04:16:29.725750 [ 17.795731] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 04:16:29.845756 [ 18.342129] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 04:16:30.397781 [ 18.356627] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Oct 3 04:16:30.409754 [ 18.366473] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, fe:ab:ed:b5:1d:6a Oct 3 04:16:30.421761 done. Oct 3 04:16:30.709701 [ 19.030381] EXT4-fs (dm-0): re-mounted. Quota mode: disabled. Oct 3 04:16:31.081713 Checking file systems.../dev/sda1: clean, 2105/61056 files, 43333/243968 blocks Oct 3 04:16:32.208786 done. Oct 3 04:16:32.244768 Cleaning up temporary files... /tmp. Oct 3 04:16:32.964780 [ 21.088188] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 04:16:33.144853 [ 21.137036] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 04:16:33.193033 [ 21.232351] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k Oct 3 04:16:33.288881 Mounting local filesystems...done. Oct 3 04:16:33.540848 Activating swapfile swap, if any...done. Oct 3 04:16:33.540848 Cleaning up temporary files.... Oct 3 04:16:33.576830 Starting Setting kernel variables: sysctl. Oct 3 04:16:33.756815 [ 23.086405] xenbr0: port 1(eth0) entered blocking state Oct 3 04:16:35.145005 [ 23.090327] xenbr0: port 1(eth0) entered disabled state Oct 3 04:16:35.145076 [ 23.095725] device eth0 entered promiscuous mode Oct 3 04:16:35.156823 [ 23.105375] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 04:16:35.156823 Configuring network interfaces...RTNETLINK answers: Operation not supported Oct 3 04:16:37.096987 Oct 3 04:16:37.097056 Waiting for xenbr0 to get ready (MAXWAIT is 2 seconds). Oct 3 04:16:37.097119 [ 25.297761] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 04:16:37.360880 [ 25.300326] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 3 04:16:37.360880 [ 25.310102] xenbr0: port 1(eth0) entered blocking state Oct 3 04:16:37.372882 [ 25.315366] xenbr0: port 1(eth0) entered forwarding state Oct 3 04:16:37.372882 [ 25.320930] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready Oct 3 04:16:37.384802 done. Oct 3 04:16:37.540956 Cleaning up temporary files.... Oct 3 04:16:37.600828 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Oct 3 04:16:37.696839 Starting nftables: none Oct 3 04:16:37.696839 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Oct 3 04:16:37.816796 failed! Oct 3 04:16:37.816796 startpar: service(s) returned failure: nftables ... failed! Oct 3 04:16:37.828697 INIT: Entering runlevel: 2 Oct 3 04:16:37.840709 Using makefile-style concurrent boot in runlevel 2. Oct 3 04:16:37.852803 Starting Apache httpd web server: apache2AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.149.64.45. Set the 'ServerName' directive globally to suppress this message Oct 3 04:16:38.600842 . Oct 3 04:16:39.680810 Starting SMP IRQ Balancer: irqbalance Oct 3 04:16:40.076769 . Oct 3 04:16:40.076769 Starting NTP server: ntpd2024-10-03T04:16:41 ntpd[1149]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 04:16:40.172869 2024-10-03T04:16:41 ntpd[1149]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 04:16:40.184817 . Oct 3 04:16:40.184817 Starting system message bus: dbus. Oct 3 04:16:40.628757 Starting OpenBSD Secure Shell server: sshd. Oct 3 04:16:41.360823 Starting /usr/local/sbin/oxenstored... Oct 3 04:16:43.941727 Setting domain 0 name, domid and JSON config... Oct 3 04:16:43.953708 Done setting up Dom0 Oct 3 04:16:43.953758 Starting xenconsoled... Oct 3 04:16:43.953801 Starting QEMU as disk backend for dom0 Oct 3 04:16:43.953846 (XEN) common/grant_table.c:1909:d0v0 Expanding d0 grant table from 1 to 2 frames Oct 3 04:16:43.965694 [ 32.000477] vif vif-1 enX1: renamed from eth1 Oct 3 04:16:44.061585 Oct 3 04:16:45.057632 Debian GNU/Linux 12 arndale-westfield hvc0 Oct 3 04:16:45.069724 Oct 3 04:16:45.069753 arndale-westfield login: [ 116.573161] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 04:18:08.633595 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 04:18:24.097750 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 04:25:05.497791 [ 630.553968] EXT4-fs (dm-3): unmounting filesystem. Oct 3 04:26:42.597697 [ 637.520523] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 04:26:49.573699 [ 642.656020] EXT4-fs (dm-3): unmounting filesystem. Oct 3 04:26:54.697801 [ 658.091347] xenbr0: port 2(vif1.0) entered blocking state Oct 3 04:27:10.144915 [ 658.095384] xenbr0: port 2(vif1.0) entered disabled state Oct 3 04:27:10.145000 [ 658.101063] device vif1.0 entered promiscuous mode Oct 3 04:27:10.156663 (XEN) d1v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 04:27:11.284974 (XEN) d1v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:27:11.296836 (XEN) d1v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:27:11.344783 (XEN) d1v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:27:11.368832 (XEN) d1v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:27:11.404760 [ 660.043068] xen-blkback: backend/vbd/1/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 04:27:12.100973 [ 660.147411] xen-blkback: backend/vbd/1/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 04:27:12.197059 (XEN) common/grant_table.c:1909:d1v1 Expanding d1 grant table from 1 to 2 frames Oct 3 04:27:12.209045 (XEN) common/grant_table.c:1909:d1v1 Expanding d1 grant table from 2 to 3 frames Oct 3 04:27:12.220939 [ 660.243541] vif vif-1-0 vif1.0: Guest Rx ready Oct 3 04:27:12.293094 [ 660.246855] IPv6: ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready Oct 3 04:27:12.304872 [ 660.253346] xenbr0: port 2(vif1.0) entered blocking state Oct 3 04:27:12.304872 [ 660.258596] xenbr0: port 2(vif1.0) entered forwarding state Oct 3 04:27:12.304872 (XEN) gnttab_mark_dirty not implemented yet Oct 3 04:27:12.340818 [ 678.162600] dwmmc_exynos 12200000.mmc: Unexpected interrupt latency Oct 3 04:27:30.217768 (XEN) common/grant_table.c:1909:d1v1 Expanding d1 grant table from 3 to 4 frames Oct 3 04:27:32.828893 [ 716.675906] xenbr0: port 2(vif1.0) entered disabled state Oct 3 04:28:08.717697 [ 716.970664] xenbr0: port 2(vif1.0) entered disabled state Oct 3 04:28:09.017714 [ 716.975003] device vif1.0 left promiscuous mode Oct 3 04:28:09.017749 [ 716.979330] xenbr0: port 2(vif1.0) entered disabled state Oct 3 04:28:09.029651 [ 744.510795] xenbr0: port 2(vif2.0) entered blocking state Oct 3 04:28:36.564996 [ 744.514825] xenbr0: port 2(vif2.0) entered disabled state Oct 3 04:28:36.565027 [ 744.520502] device vif2.0 entered promiscuous mode Oct 3 04:28:36.565091 (XEN) d2v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 04:28:37.652685 (XEN) d2v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:28:37.664688 (XEN) d2v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:28:37.700741 (XEN) d2v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:28:37.737006 (XEN) d2v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:28:37.760960 [ 746.282999] xen-blkback: backend/vbd/2/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 04:28:38.340793 [ 746.370516] xen-blkback: backend/vbd/2/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 04:28:38.424858 (XEN) common/grant_table.c:1909:d2v2 Expanding d2 grant table from 1 to 2 frames Oct 3 04:28:38.488920 (XEN) common/grant_table.c:1909:d2v2 Expanding d2 grant table from 2 to 3 frames Oct 3 04:28:38.488920 [ 746.486165] vif vif-2-0 vif2.0: Guest Rx ready Oct 3 04:28:38.536877 [ 746.489332] IPv6: ADDRCONF(NETDEV_CHANGE): vif2.0: link becomes ready Oct 3 04:28:38.536877 [ 746.512595] xenbr0: port 2(vif2.0) entered blocking state Oct 3 04:28:38.560918 [ 746.516624] xenbr0: port 2(vif2.0) entered forwarding state Oct 3 04:28:38.573064 (XEN) common/grant_table.c:1909:d2v3 Expanding d2 grant table from 3 to 4 frames Oct 3 04:28:58.328864 [ 798.564915] xenbr0: port 2(vif2.0) entered disabled state Oct 3 04:29:30.605740 [ 798.870759] xenbr0: port 2(vif2.0) entered disabled state Oct 3 04:29:30.917797 [ 798.875735] device vif2.0 left promiscuous mode Oct 3 04:29:30.917859 [ 798.879427] xenbr0: port 2(vif2.0) entered disabled state Oct 3 04:29:30.929712 [ 825.760559] xenbr0: port 2(vif3.0) entered blocking state Oct 3 04:29:57.804800 [ 825.764590] xenbr0: port 2(vif3.0) entered disabled state Oct 3 04:29:57.816805 [ 825.770271] device vif3.0 entered promiscuous mode Oct 3 04:29:57.816840 (XEN) d3v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 04:29:58.900714 (XEN) d3v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:29:58.912719 (XEN) d3v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:29:58.960697 (XEN) d3v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:29:58.984720 (XEN) d3v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:29:59.020697 [ 827.684062] xen-blkback: backend/vbd/3/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 04:29:59.732720 [ 827.725714] xen-blkback: backend/vbd/3/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 04:29:59.780869 (XEN) common/grant_table.c:1909:d3v1 Expanding d3 grant table from 1 to 2 frames Oct 3 04:29:59.804910 (XEN) common/grant_table.c:1909:d3v1 Expanding d3 grant table from 2 to 3 frames Oct 3 04:29:59.816823 [ 827.833957] vif vif-3-0 vif3.0: Guest Rx ready Oct 3 04:29:59.876851 [ 827.837405] IPv6: ADDRCONF(NETDEV_CHANGE): vif3.0: link becomes ready Oct 3 04:29:59.888864 [ 827.843737] xenbr0: port 2(vif3.0) entered blocking state Oct 3 04:29:59.888899 [ 827.849043] xenbr0: port 2(vif3.0) entered forwarding state Oct 3 04:29:59.900770 (XEN) common/grant_table.c:1909:d3v2 Expanding d3 grant table from 3 to 4 frames Oct 3 04:30:20.761062 [ 882.623795] xenbr0: port 2(vif3.0) entered disabled state Oct 3 04:30:54.668874 [ 882.930943] xenbr0: port 2(vif3.0) entered disabled state Oct 3 04:30:54.972895 [ 882.935525] device vif3.0 left promiscuous mode Oct 3 04:30:54.984885 [ 882.939604] xenbr0: port 2(vif3.0) entered disabled state Oct 3 04:30:54.984885 [ 909.780772] xenbr0: port 2(vif4.0) entered blocking state Oct 3 04:31:21.833088 [ 909.784848] xenbr0: port 2(vif4.0) entered disabled state Oct 3 04:31:21.833165 [ 909.790480] device vif4.0 entered promiscuous mode Oct 3 04:31:21.833214 (XEN) d4v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 04:31:22.925008 (XEN) d4v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:31:22.937003 (XEN) d4v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:31:22.977009 (XEN) d4v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:31:23.013026 (XEN) d4v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:31:23.037009 [ 911.697197] xen-blkback: backend/vbd/4/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 04:31:23.745067 [ 911.902868] xen-blkback: backend/vbd/4/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 04:31:23.949046 (XEN) common/grant_table.c:1909:d4v2 Expanding d4 grant table from 1 to 2 frames Oct 3 04:31:23.985055 (XEN) common/grant_table.c:1909:d4v2 Expanding d4 grant table from 2 to 3 frames Oct 3 04:31:23.996999 [ 911.990468] vif vif-4-0 vif4.0: Guest Rx ready Oct 3 04:31:24.033021 [ 911.993770] IPv6: ADDRCONF(NETDEV_CHANGE): vif4.0: link becomes ready Oct 3 04:31:24.045068 [ 912.000160] xenbr0: port 2(vif4.0) entered blocking state Oct 3 04:31:24.045130 [ 912.005541] xenbr0: port 2(vif4.0) entered forwarding state Oct 3 04:31:24.056939 (XEN) common/grant_table.c:1909:d4v2 Expanding d4 grant table from 3 to 4 frames Oct 3 04:31:44.073777 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 04:31:47.076993 [ 962.428011] xenbr0: port 2(vif4.0) entered disabled state Oct 3 04:32:14.469775 [ 962.732349] xenbr0: port 2(vif4.0) entered disabled state Oct 3 04:32:14.781736 [ 962.745666] device vif4.0 left promiscuous mode Oct 3 04:32:14.793756 [ 962.748836] xenbr0: port 2(vif4.0) entered disabled state Oct 3 04:32:14.793819 [ 989.646377] xenbr0: port 2(vif5.0) entered blocking state Oct 3 04:32:41.692939 [ 989.650445] xenbr0: port 2(vif5.0) entered disabled state Oct 3 04:32:41.692939 [ 989.656088] device vif5.0 entered promiscuous mode Oct 3 04:32:41.704895 (XEN) d5v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 04:32:42.789015 (XEN) d5v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:32:42.811510 (XEN) d5v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:32:42.836787 (XEN) d5v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:32:42.872831 (XEN) d5v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:32:42.896884 [ 991.628709] xen-blkback: backend/vbd/5/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 04:32:43.677742 (XEN) common/grant_table.c:1909:d5v1 Expanding d5 grant table from 1 to 2 frames Oct 3 04:32:43.701721 (XEN) common/grant_table.c:1909:d5v1 Expanding d5 grant table from 2 to 3 frames Oct 3 04:32:43.713749 [ 991.689417] xen-blkback: backend/vbd/5/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 04:32:43.737690 [ 991.774670] vif vif-5-0 vif5.0: Guest Rx ready Oct 3 04:32:43.821721 [ 991.777842] IPv6: ADDRCONF(NETDEV_CHANGE): vif5.0: link becomes ready Oct 3 04:32:43.821759 [ 991.784424] xenbr0: port 2(vif5.0) entered blocking state Oct 3 04:32:43.833686 [ 991.789737] xenbr0: port 2(vif5.0) entered forwarding state Oct 3 04:32:43.833717 [ 1003.660271] dwmmc_exynos 12200000.mmc: Unexpected interrupt latency Oct 3 04:32:55.712804 (XEN) common/grant_table.c:1909:d5v1 Expanding d5 grant table from 3 to 4 frames Oct 3 04:33:04.148858 [ 1022.896095] dwmmc_exynos 12200000.mmc: Unexpected interrupt latency Oct 3 04:33:14.944877 [ 1046.421036] xenbr0: port 2(vif5.0) entered disabled state Oct 3 04:33:38.461743 [ 1046.670747] xenbr0: port 2(vif5.0) entered disabled state Oct 3 04:33:38.713749 [ 1046.676333] device vif5.0 left promiscuous mode Oct 3 04:33:38.713811 [ 1046.679507] xenbr0: port 2(vif5.0) entered disabled state Oct 3 04:33:38.725721 [ 1073.521906] xenbr0: port 2(vif6.0) entered blocking state Oct 3 04:34:05.573811 [ 1073.525937] xenbr0: port 2(vif6.0) entered disabled state Oct 3 04:34:05.573887 [ 1073.531624] device vif6.0 entered promiscuous mode Oct 3 04:34:05.573936 (XEN) d6v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 04:34:06.629794 (XEN) d6v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:34:06.641795 (XEN) d6v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:34:06.689691 (XEN) d6v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:34:06.713663 (XEN) d6v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:34:06.737698 [ 1075.389555] xen-blkback: backend/vbd/6/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 04:34:07.433786 [ 1075.534945] xen-blkback: backend/vbd/6/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 04:34:07.589678 (XEN) common/grant_table.c:1909:d6v2 Expanding d6 grant table from 1 to 2 frames Oct 3 04:34:07.601750 (XEN) common/grant_table.c:1909:d6v2 Expanding d6 grant table from 2 to 3 frames Oct 3 04:34:07.613688 [ 1075.621942] vif vif-6-0 vif6.0: Guest Rx ready Oct 3 04:34:07.661715 [ 1075.625105] IPv6: ADDRCONF(NETDEV_CHANGE): vif6.0: link becomes ready Oct 3 04:34:07.673735 [ 1075.631683] xenbr0: port 2(vif6.0) entered blocking state Oct 3 04:34:07.709689 [ 1075.665846] xenbr0: port 2(vif6.0) entered forwarding state Oct 3 04:34:07.733681 (XEN) common/grant_table.c:1909:d6v0 Expanding d6 grant table from 3 to 4 frames Oct 3 04:34:28.013794 [ 1126.535815] xenbr0: port 2(vif6.0) entered disabled state Oct 3 04:34:58.577910 [ 1126.802373] xenbr0: port 2(vif6.0) entered disabled state Oct 3 04:34:58.841784 [ 1126.813489] device vif6.0 left promiscuous mode Oct 3 04:34:58.853861 [ 1126.816669] xenbr0: port 2(vif6.0) entered disabled state Oct 3 04:34:58.865795 [ 1153.713359] xenbr0: port 2(vif7.0) entered blocking state Oct 3 04:35:25.753795 [ 1153.717392] xenbr0: port 2(vif7.0) entered disabled state Oct 3 04:35:25.765763 [ 1153.723046] device vif7.0 entered promiscuous mode Oct 3 04:35:25.765825 (XEN) d7v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 04:35:26.809733 (XEN) d7v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:35:26.833633 (XEN) d7v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:35:26.869650 (XEN) d7v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:35:26.893654 (XEN) d7v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:35:26.929609 [ 1155.538776] xen-blkback: backend/vbd/7/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 04:35:27.589723 [ 1155.620971] xen-blkback: backend/vbd/7/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 04:35:27.661754 (XEN) common/grant_table.c:1909:d7v0 Expanding d7 grant table from 1 to 2 frames Oct 3 04:35:27.697739 (XEN) common/grant_table.c:1909:d7v0 Expanding d7 grant table from 2 to 3 frames Oct 3 04:35:27.697807 [ 1155.848096] vif vif-7-0 vif7.0: Guest Rx ready Oct 3 04:35:27.889845 [ 1155.852138] IPv6: ADDRCONF(NETDEV_CHANGE): vif7.0: link becomes ready Oct 3 04:35:27.889927 [ 1155.857827] xenbr0: port 2(vif7.0) entered blocking state Oct 3 04:35:27.901776 [ 1155.863209] xenbr0: port 2(vif7.0) entered forwarding state Oct 3 04:35:27.901838 [ 1158.328713] dwmmc_exynos 12200000.mmc: Unexpected interrupt latency Oct 3 04:35:30.368843 (XEN) common/grant_table.c:1909:d7v0 Expanding d7 grant table from 3 to 4 frames Oct 3 04:35:48.005730 [ 1185.532217] dwmmc_exynos 12200000.mmc: Unexpected interrupt latency Oct 3 04:35:57.581635 [ 1206.939233] xenbr0: port 2(vif7.0) entered disabled state Oct 3 04:36:18.988658 [ 1207.200663] xenbr0: port 2(vif7.0) entered disabled state Oct 3 04:36:19.240702 [ 1207.205035] device vif7.0 left promiscuous mode Oct 3 04:36:19.252654 [ 1207.209309] xenbr0: port 2(vif7.0) entered disabled state Oct 3 04:36:19.252654 [ 1233.987890] xenbr0: port 2(vif8.0) entered blocking state Oct 3 04:36:46.028917 [ 1233.991974] xenbr0: port 2(vif8.0) entered disabled state Oct 3 04:36:46.040904 [ 1233.997565] device vif8.0 entered promiscuous mode Oct 3 04:36:46.040904 (XEN) d8v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 04:36:47.100881 (XEN) d8v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:36:47.112959 (XEN) d8v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:36:47.148855 (XEN) d8v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:36:47.172897 (XEN) d8v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:36:47.196852 [ 1235.806751] xen-blkback: backend/vbd/8/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 04:36:47.853847 [ 1235.850443] xen-blkback: backend/vbd/8/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 04:36:47.901746 (XEN) common/grant_table.c:1909:d8v0 Expanding d8 grant table from 1 to 2 frames Oct 3 04:36:47.973739 (XEN) common/grant_table.c:1909:d8v0 Expanding d8 grant table from 2 to 3 frames Oct 3 04:36:48.009718 [ 1236.005735] vif vif-8-0 vif8.0: Guest Rx ready Oct 3 04:36:48.045765 [ 1236.008971] IPv6: ADDRCONF(NETDEV_CHANGE): vif8.0: link becomes ready Oct 3 04:36:48.057755 [ 1236.016386] xenbr0: port 2(vif8.0) entered blocking state Oct 3 04:36:48.057818 [ 1236.021033] xenbr0: port 2(vif8.0) entered forwarding state Oct 3 04:36:48.069695 (XEN) common/grant_table.c:1909:d8v1 Expanding d8 grant table from 3 to 4 frames Oct 3 04:37:08.249814 [ 1287.115658] xenbr0: port 2(vif8.0) entered disabled state Oct 3 04:37:39.153791 [ 1287.380832] xenbr0: port 2(vif8.0) entered disabled state Oct 3 04:37:39.417750 [ 1287.385483] device vif8.0 left promiscuous mode Oct 3 04:37:39.429740 [ 1287.389480] xenbr0: port 2(vif8.0) entered disabled state Oct 3 04:37:39.429804 [ 1314.264815] xenbr0: port 2(vif9.0) entered blocking state Oct 3 04:38:06.305800 [ 1314.268852] xenbr0: port 2(vif9.0) entered disabled state Oct 3 04:38:06.317759 [ 1314.274538] device vif9.0 entered promiscuous mode Oct 3 04:38:06.317813 (XEN) d9v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 04:38:07.397793 (XEN) d9v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:38:07.409752 (XEN) d9v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:38:07.445754 (XEN) d9v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:38:07.481717 (XEN) d9v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:38:07.505753 [ 1316.186578] xen-blkback: backend/vbd/9/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 04:38:08.225842 [ 1316.242686] xen-blkback: backend/vbd/9/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 04:38:08.285735 (XEN) common/grant_table.c:1909:d9v3 Expanding d9 grant table from 1 to 2 frames Oct 3 04:38:08.321750 (XEN) common/grant_table.c:1909:d9v3 Expanding d9 grant table from 2 to 3 frames Oct 3 04:38:08.333726 [ 1316.562775] vif vif-9-0 vif9.0: Guest Rx ready Oct 3 04:38:08.597748 [ 1316.565950] IPv6: ADDRCONF(NETDEV_CHANGE): vif9.0: link becomes ready Oct 3 04:38:08.609866 [ 1316.572617] xenbr0: port 2(vif9.0) entered blocking state Oct 3 04:38:08.609930 [ 1316.577869] xenbr0: port 2(vif9.0) entered forwarding state Oct 3 04:38:08.621719 (XEN) common/grant_table.c:1909:d9v3 Expanding d9 grant table from 3 to 4 frames Oct 3 04:38:28.575366 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 04:38:29.020841 [ 1367.694909] xenbr0: port 2(vif9.0) entered disabled state Oct 3 04:38:59.737827 [ 1367.981837] xenbr0: port 2(vif9.0) entered disabled state Oct 3 04:39:00.025794 [ 1367.986230] device vif9.0 left promiscuous mode Oct 3 04:39:00.025856 [ 1367.990554] xenbr0: port 2(vif9.0) entered disabled state Oct 3 04:39:00.037732 [ 1394.920009] xenbr0: port 2(vif10.0) entered blocking state Oct 3 04:39:26.957630 [ 1394.924188] xenbr0: port 2(vif10.0) entered disabled state Oct 3 04:39:26.969650 [ 1394.929860] device vif10.0 entered promiscuous mode Oct 3 04:39:26.969650 (XEN) d10v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 04:39:28.025596 (XEN) d10v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:39:28.037592 (XEN) d10v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:39:28.085750 (XEN) d10v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:39:28.109732 (XEN) d10v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:39:28.145672 [ 1396.732599] xen-blkback: backend/vbd/10/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 04:39:28.781713 [ 1396.796995] xen-blkback: backend/vbd/10/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 04:39:28.841773 (XEN) common/grant_table.c:1909:d10v2 Expanding d10 grant table from 1 to 2 frames Oct 3 04:39:28.949796 (XEN) common/grant_table.c:1909:d10v2 Expanding d10 grant table from 2 to 3 frames Oct 3 04:39:28.961670 [ 1396.959049] vif vif-10-0 vif10.0: Guest Rx ready Oct 3 04:39:28.997736 [ 1396.962868] IPv6: ADDRCONF(NETDEV_CHANGE): vif10.0: link becomes ready Oct 3 04:39:29.009776 [ 1396.969061] xenbr0: port 2(vif10.0) entered blocking state Oct 3 04:39:29.009838 [ 1396.974504] xenbr0: port 2(vif10.0) entered forwarding state Oct 3 04:39:29.021696 (XEN) common/grant_table.c:1909:d10v0 Expanding d10 grant table from 3 to 4 frames Oct 3 04:39:50.193803 [ 1447.984795] xenbr0: port 2(vif10.0) entered disabled state Oct 3 04:40:20.029605 [ 1448.240710] xenbr0: port 2(vif10.0) entered disabled state Oct 3 04:40:20.281601 [ 1448.250625] device vif10.0 left promiscuous mode Oct 3 04:40:20.293659 [ 1448.253890] xenbr0: port 2(vif10.0) entered disabled state Oct 3 04:40:20.293659 [ 1475.098477] xenbr0: port 2(vif11.0) entered blocking state Oct 3 04:40:47.141723 [ 1475.102633] xenbr0: port 2(vif11.0) entered disabled state Oct 3 04:40:47.141759 [ 1475.108306] device vif11.0 entered promiscuous mode Oct 3 04:40:47.153659 (XEN) d11v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 04:40:48.245664 (XEN) d11v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:40:48.257676 (XEN) d11v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:40:48.293684 (XEN) d11v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:40:48.329666 (XEN) d11v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:40:48.353680 [ 1477.082244] xen-blkback: backend/vbd/11/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 04:40:49.133753 [ 1477.265429] xen-blkback: backend/vbd/11/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 04:40:49.313644 (XEN) common/grant_table.c:1909:d11v0 Expanding d11 grant table from 1 to 2 frames Oct 3 04:40:49.325673 (XEN) common/grant_table.c:1909:d11v0 Expanding d11 grant table from 2 to 3 frames Oct 3 04:40:49.337704 [ 1477.371555] vif vif-11-0 vif11.0: Guest Rx ready Oct 3 04:40:49.409793 [ 1477.375060] IPv6: ADDRCONF(NETDEV_CHANGE): vif11.0: link becomes ready Oct 3 04:40:49.421687 [ 1477.381533] xenbr0: port 2(vif11.0) entered blocking state Oct 3 04:40:49.421700 [ 1477.386953] xenbr0: port 2(vif11.0) entered forwarding state Oct 3 04:40:49.433654 (XEN) common/grant_table.c:1909:d11v1 Expanding d11 grant table from 3 to 4 frames Oct 3 04:41:09.556841 [ 1527.944834] xenbr0: port 2(vif11.0) entered disabled state Oct 3 04:41:39.981733 [ 1528.262016] xenbr0: port 2(vif11.0) entered disabled state Oct 3 04:41:40.297630 [ 1528.266851] device vif11.0 left promiscuous mode Oct 3 04:41:40.309649 [ 1528.270861] xenbr0: port 2(vif11.0) entered disabled state Oct 3 04:41:40.309684 [ 1555.605839] xenbr0: port 2(vif12.0) entered blocking state Oct 3 04:42:07.645746 [ 1555.609958] xenbr0: port 2(vif12.0) entered disabled state Oct 3 04:42:07.645795 [ 1555.615713] device vif12.0 entered promiscuous mode Oct 3 04:42:07.657660 (XEN) d12v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 04:42:08.713667 (XEN) d12v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:42:08.725675 (XEN) d12v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:42:08.773633 (XEN) d12v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:42:08.797679 (XEN) d12v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 04:42:08.821680 [ 1557.349557] xen-blkback: backend/vbd/12/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 04:42:09.393645 [ 1557.389640] xen-blkback: backend/vbd/12/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 04:42:09.429696 (XEN) common/grant_table.c:1909:d12v2 Expanding d12 grant table from 1 to 2 frames Oct 3 04:42:09.549719 (XEN) common/grant_table.c:1909:d12v2 Expanding d12 grant table from 2 to 3 frames Oct 3 04:42:09.561661 [ 1557.567017] vif vif-12-0 vif12.0: Guest Rx ready Oct 3 04:42:09.609731 [ 1557.570399] IPv6: ADDRCONF(NETDEV_CHANGE): vif12.0: link becomes ready Oct 3 04:42:09.609763 [ 1557.576979] xenbr0: port 2(vif12.0) entered blocking state Oct 3 04:42:09.621676 [ 1557.587270] xenbr0: port 2(vif12.0) entered forwarding state Oct 3 04:42:09.621710 (XEN) common/grant_table.c:1909:d12v2 Expanding d12 grant table from 3 to 4 frames Oct 3 04:42:29.681743 [ 1605.103606] xenbr0: port 2(vif12.0) entered disabled state Oct 3 04:42:57.140948 [ 1605.260856] xenbr0: port 2(vif12.0) entered disabled state Oct 3 04:42:57.296845 [ 1605.265377] device vif12.0 left promiscuous mode Oct 3 04:42:57.308847 [ 1605.269687] xenbr0: port 2(vif12.0) entered disabled state Oct 3 04:42:57.308847 Oct 3 04:43:17.033407 (XEN) *** Serial input to Xen (type 'CTRL-x' three times to switch input) Oct 3 04:43:17.053761 Oct 3 04:43:17.055167 Oct 3 04:43:18.031304 (XEN) '0' pressed -> dumping Dom0's registers Oct 3 04:43:18.053777 (XEN) *** Dumping Dom0 vcpu#0 state: *** Oct 3 04:43:18.053837 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Oct 3 04:43:18.056114 Not tainted ]---- Oct 3 04:43:18.065696 (XEN) CPU: 0 Oct 3 04:43:18.065749 (XEN) PC: c031ce28 Oct 3 04:43:18.065793 (XEN) CPSR: 600d0093 MODE:32-bit Guest SVC Oct 3 04:43:18.065840 (XEN) R0: 00000005 R1: 00000000 R2: 00501d71 R3: c031ce20 Oct 3 04:43:18.077763 (XEN) R4: c1909d80 R5: c1b12200 R6: c1904d1c R7: c1904d78 Oct 3 04:43:18.077826 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c00 Oct 3 04:43:18.089753 (XEN) USR: SP: becc1948 LR: b6b89893 Oct 3 04:43:18.089812 (XEN) SVC: SP: c1901f40 LR: c0308df0 SPSR:600d0013 Oct 3 04:43:18.089861 (XEN) ABT: SP: c1b22b10 LR: c0300ea0 SPSR:60070193 Oct 3 04:43:18.101764 (XEN) UND: SP: c1b22b20 LR: c0300fa0 SPSR:600d0093 Oct 3 04:43:18.101825 (XEN) IRQ: SP: c1b22b00 LR: c0300ba0 SPSR:600d0193 Oct 3 04:43:18.113689 (XEN) FIQ: SP: c1b22b30 LR: c1b22b30 SPSR:00000000 Oct 3 04:43:18.113689 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 04:43:18.113727 (XEN) Oct 3 04:43:18.125756 (XEN) SCTLR: 10c5387d Oct 3 04:43:18.125816 (XEN) TCR: 00000000 Oct 3 04:43:18.125860 (XEN) TTBR0: 0000000064e4006a Oct 3 04:43:18.125904 (XEN) TTBR1: 000000006020406a Oct 3 04:43:18.125947 (XEN) IFAR: b6f7602c, IFSR: 00000007 Oct 3 04:43:18.137740 (XEN) DFAR: b6c6f000, DFSR: 0000081f Oct 3 04:43:18.137799 (XEN) Oct 3 04:43:18.137840 (XEN) VTCR_EL2: 80003558 Oct 3 04:43:18.137884 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 04:43:18.149795 (XEN) Oct 3 04:43:18.149849 (XEN) SCTLR_EL2: 30cd187f Oct 3 04:43:18.149894 (XEN) HCR_EL2: 007c663f Oct 3 04:43:18.149937 (XEN) TTBR0_EL2: 000000004110e000 Oct 3 04:43:18.149982 (XEN) Oct 3 04:43:18.150021 (XEN) ESR_EL2: 07e00000 Oct 3 04:43:18.161821 (XEN) HPFAR_EL2: 00104810 Oct 3 04:43:18.161879 (XEN) HDFAR: e0807f00 Oct 3 04:43:18.161923 (XEN) HIFAR: ffff0018 Oct 3 04:43:18.161965 (XEN) Oct 3 04:43:18.162004 (XEN) Guest stack trace from sp=c1901f40: Oct 3 04:43:18.173827 (XEN) Failed to convert stack to physical address Oct 3 04:43:18.173890 (XEN) *** Dumping Dom0 vcpu#1 state: *** Oct 3 04:43:18.173937 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 04:43:18.185845 (XEN) CPU: 0 Oct 3 04:43:18.185901 (XEN) PC: c031ce28 Oct 3 04:43:18.185949 (XEN) CPSR: 60070093 MODE:32-bit Guest SVC Oct 3 04:43:18.186021 (XEN) R0: 00000005 R1: 00000000 R2: 0031f469 R3: c031ce20 Oct 3 04:43:18.197843 (XEN) R4: c210e600 R5: c1b12200 R6: c1904d1c R7: c1904d78 Oct 3 04:43:18.197907 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c00 Oct 3 04:43:18.209802 (XEN) USR: SP: bea146d0 LR: b6f276c5 Oct 3 04:43:18.209859 (XEN) SVC: SP: e08c9f90 LR: c0308df0 SPSR:60070030 Oct 3 04:43:18.209906 (XEN) ABT: SP: c1b22b50 LR: c0300ea0 SPSR:600f0193 Oct 3 04:43:18.221817 (XEN) UND: SP: c1b22b60 LR: c0300fa0 SPSR:60070093 Oct 3 04:43:18.221893 (XEN) IRQ: SP: c1b22b40 LR: c0300ba0 SPSR:600f0193 Oct 3 04:43:18.233788 (XEN) FIQ: SP: c1b22b70 LR: c1b22b70 SPSR:00000000 Oct 3 04:43:18.233849 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 04:43:18.245821 (XEN) Oct 3 04:43:18.245874 (XEN) SCTLR: 10c5387d Oct 3 04:43:18.245918 (XEN) TCR: 00000000 Oct 3 04:43:18.245959 (XEN) TTBR0: 000000006272806a Oct 3 04:43:18.246002 (XEN) TTBR1: 000000006020406a Oct 3 04:43:18.257804 (XEN) IFAR: b6e02814, IFSR: 00000007 Oct 3 04:43:18.257863 (XEN) DFAR: 00553318, DFSR: 0000081f Oct 3 04:43:18.257908 (XEN) Oct 3 04:43:18.257947 (XEN) VTCR_EL2: 80003558 Oct 3 04:43:18.257989 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 04:43:18.269819 (XEN) Oct 3 04:43:18.269872 (XEN) SCTLR_EL2: 30cd187f Oct 3 04:43:18.269916 (XEN) HCR_EL2: 007c663f Oct 3 04:43:18.269958 (XEN) TTBR0_EL2: 000000004110e000 Oct 3 04:43:18.270000 (XEN) Oct 3 04:43:18.270038 (XEN) ESR_EL2: 07e00000 Oct 3 04:43:18.281825 (XEN) HPFAR_EL2: 00104810 Oct 3 04:43:18.281881 (XEN) HDFAR: e0807f00 Oct 3 04:43:18.281924 (XEN) HIFAR: ffff0018 Oct 3 04:43:18.281966 (XEN) Oct 3 04:43:18.282004 (XEN) Guest stack trace from sp=e08c9f90: Oct 3 04:43:18.293824 (XEN) Failed to convert stack to physical address Oct 3 04:43:18.293824 Oct 3 04:43:20.029660 (XEN) 'H' pressed -> dumping heap info (now = 1633276301458) Oct 3 04:43:20.045786 (XEN) heap[node=0][zone=0] -> 16271 pages Oct 3 04:43:20.045845 (XEN) heap[node=0][zone=1] -> 0 Oct 3 04:43:20.048257 pages Oct 3 04:43:20.057624 (XEN) heap[node=0][zone=2] -> 0 pages Oct 3 04:43:20.057655 (XEN) heap[node=0][zone=3] -> 0 pages Oct 3 04:43:20.057679 (XEN) heap[node=0][zone=4] -> 0 pages Oct 3 04:43:20.057703 (XEN) heap[node=0][zone=5] -> 0 pages Oct 3 04:43:20.069797 (XEN) heap[node=0][zone=6] -> 0 pages Oct 3 04:43:20.069855 (XEN) heap[node=0][zone=7] -> 0 pages Oct 3 04:43:20.069936 (XEN) heap[node=0][zone=8] -> 0 pages Oct 3 04:43:20.081741 (XEN) heap[node=0][zone=9] -> 0 pages Oct 3 04:43:20.081800 (XEN) heap[node=0][zone=10] -> 0 pages Oct 3 04:43:20.081845 (XEN) heap[node=0][zone=11] -> 0 pages Oct 3 04:43:20.081888 (XEN) heap[node=0][zone=12] -> 0 pages Oct 3 04:43:20.093734 (XEN) heap[node=0][zone=13] -> 0 pages Oct 3 04:43:20.093793 (XEN) heap[node=0][zone=14] -> 0 pages Oct 3 04:43:20.093838 (XEN) heap[node=0][zone=15] -> 0 pages Oct 3 04:43:20.105751 (XEN) heap[node=0][zone=16] -> 0 pages Oct 3 04:43:20.105810 (XEN) heap[node=0][zone=17] -> 0 pages Oct 3 04:43:20.105855 (XEN) heap[node=0][zone=18] -> 0 pages Oct 3 04:43:20.105898 (XEN) heap[node=0][zone=19] -> 130835 pages Oct 3 04:43:20.117742 (XEN) heap[node=0][zone=20] -> 241609 pages Oct 3 04:43:20.117801 (XEN) heap[node=0][zone=21] -> 0 pages Oct 3 04:43:20.117846 (XEN) heap[node=0][zone=22] -> 0 pages Oct 3 04:43:20.129749 (XEN) heap[node=0][zone=23] -> 0 pages Oct 3 04:43:20.129808 (XEN) heap[node=0][zone=24] -> 0 pages Oct 3 04:43:20.129854 (XEN) heap[node=0][zone=25] -> 0 pages Oct 3 04:43:20.141728 (XEN) heap[node=0][zone=26] -> 0 pages Oct 3 04:43:20.141788 (XEN) heap[node=0][zone=27] -> 0 pages Oct 3 04:43:20.141834 (XEN) heap[node=0][zone=28] -> 0 pages Oct 3 04:43:20.141877 Oct 3 04:43:22.070067 Oct 3 04:43:23.825000 Oct 3 04:43:24.050185 Oct 3 04:43:25.831891 Oct 3 04:43:26.041081 (XEN) Dumping timer queues: Oct 3 04:43:26.065786 (XEN) CPU00: Oct 3 04:43:26.065840 (XEN) ex= 26971us timer=43ff9070 cb=credit.c#csched_acct(43ff9008) Oct 3 04:43:26.065892 (XEN) ex= Oct 3 04:43:26.067639 385402us timer=43fdc968 cb=vtimer.c#virt_timer_expired(43fdc960) Oct 3 04:43:26.077648 (XEN) CPU01: Oct 3 04:43:26.077676 (XEN) ex= 27140us timer=43fee968 cb=vtimer.c#virt_timer_expired(43fee960) Oct 3 04:43:26.089687 Oct 3 04:43:28.044184 Oct 3 04:43:29.840160 Oct 3 04:43:30.040630 (XEN) 'd' pressed -> dumping registers Oct 3 04:43:30.065678 (XEN) Oct 3 04:43:30.065708 (XEN) *** Dumping CPU0 host state: *** Oct 3 04:43:30.065733 (XEN) ----[ Xen-4.20-unstable arm32 debug=y N Oct 3 04:43:30.067180 ot tainted ]---- Oct 3 04:43:30.077651 (XEN) CPU: 0 Oct 3 04:43:30.077680 (XEN) PC: 0025f53c domain.c#idle_loop+0x130/0x1ac Oct 3 04:43:30.077707 (XEN) CPSR: 6007005a MODE:Hypervisor Oct 3 04:43:30.077733 (XEN) R0: 00000000 R1: 00000001 R2: 00000000 R3: 00000000 Oct 3 04:43:30.089662 (XEN) R4: 00000000 R5: 003000e0 R6: 00331324 R7: 00000001 Oct 3 04:43:30.089696 (XEN) R8: 00331104 R9: 00000000 R10:40e00000 R11:4003ff54 R12:fffffffc Oct 3 04:43:30.101656 (XEN) HYP: SP: 4003ff44 LR: 00225b7c Oct 3 04:43:30.101688 (XEN) Oct 3 04:43:30.101711 (XEN) VTCR_EL2: 80003558 Oct 3 04:43:30.101734 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 04:43:30.113660 (XEN) Oct 3 04:43:30.113689 (XEN) SCTLR_EL2: 30cd187f Oct 3 04:43:30.113714 (XEN) HCR_EL2: 007c663f Oct 3 04:43:30.113737 (XEN) TTBR0_EL2: 000000004110e000 Oct 3 04:43:30.113760 (XEN) Oct 3 04:43:30.113782 (XEN) ESR_EL2: 07e00000 Oct 3 04:43:30.125657 (XEN) HPFAR_EL2: 00104810 Oct 3 04:43:30.125689 (XEN) HDFAR: e0807f00 Oct 3 04:43:30.125713 (XEN) HIFAR: ffff0018 Oct 3 04:43:30.125736 (XEN) Oct 3 04:43:30.125757 (XEN) Xen stack trace from sp=4003ff44: Oct 3 04:43:30.137656 (XEN) 07e00000 00295014 002919bc 4003ff4c 002678fc 00000000 00000000 00000000 Oct 3 04:43:30.137692 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 04:43:30.149659 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 04:43:30.149694 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 04:43:30.161658 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 04:43:30.173661 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 04:43:30.173695 (XEN) Xen call trace: Oct 3 04:43:30.173719 (XEN) [<0025f53c>] domain.c#idle_loop+0x130/0x1ac (PC) Oct 3 04:43:30.185656 (XEN) [<00225b7c>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 04:43:30.185691 (XEN) [<002678fc>] arch_get_xen_caps+0/0x90 Oct 3 04:43:30.185717 (XEN) Oct 3 04:43:30.197661 (XEN) *** Dumping CPU1 host state: *** Oct 3 04:43:30.197694 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 04:43:30.197722 (XEN) CPU: 1 Oct 3 04:43:30.197744 (XEN) PC: 0025f53c domain.c#idle_loop+0x130/0x1ac Oct 3 04:43:30.209661 (XEN) CPSR: 600f005a MODE:Hypervisor Oct 3 04:43:30.209693 (XEN) R0: 00000000 R1: 00000001 R2: 3fd06000 R3: 00000000 Oct 3 04:43:30.221658 (XEN) R4: 00000001 R5: 003000e0 R6: 00331324 R7: 00000002 Oct 3 04:43:30.221692 (XEN) R8: 00331104 R9: 00000001 R10:40e00000 R11:4000ff54 R12:fffffffc Oct 3 04:43:30.233660 (XEN) HYP: SP: 4000ff44 LR: 00225b7c Oct 3 04:43:30.233692 (XEN) Oct 3 04:43:30.233715 (XEN) VTCR_EL2: 80003558 Oct 3 04:43:30.233750 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 04:43:30.233775 (XEN) Oct 3 04:43:30.233796 (XEN) SCTLR_EL2: 30cd187f Oct 3 04:43:30.245660 (XEN) HCR_EL2: 007c663f Oct 3 04:43:30.245691 (XEN) TTBR0_EL2: 00000000ba004000 Oct 3 04:43:30.245716 (XEN) Oct 3 04:43:30.245737 (XEN) ESR_EL2: 07e00000 Oct 3 04:43:30.245759 (XEN) HPFAR_EL2: 00104810 Oct 3 04:43:30.257659 (XEN) HDFAR: e0807f00 Oct 3 04:43:30.257690 (XEN) HIFAR: c09f6d20 Oct 3 04:43:30.257713 (XEN) Oct 3 04:43:30.257735 (XEN) Xen stack trace from sp=4000ff44: Oct 3 04:43:30.257759 (XEN) 07e00000 00301290 00000001 4000ff3c 002681e0 00000000 00000000 00000000 Oct 3 04:43:30.269661 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 04:43:30.281659 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 04:43:30.281693 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 04:43:30.293662 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 04:43:30.293697 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 04:43:30.305660 (XEN) Xen call trace: Oct 3 04:43:30.305691 (XEN) [<0025f53c>] domain.c#idle_loop+0x130/0x1ac (PC) Oct 3 04:43:30.305718 (XEN) [<00225b7c>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 04:43:30.317644 (XEN) [<002681e0>] start_secondary+0x204/0x20c Oct 3 04:43:30.317677 (XEN) Oct 3 04:43:30.317699 Oct 3 04:43:32.108897 (XEN) 'e' pressed -> dumping event-channel info Oct 3 04:43:32.129873 (XEN) Event channel information for domain 0: Oct 3 04:43:32.129921 (XEN) Polling vCPUs: {} Oct 3 04:43:32.129945 (XEN) port Oct 3 04:43:32.131862 [p/m/s] Oct 3 04:43:32.141636 (XEN) 1 [0/0/ - ]: s=3 n=1 x=0 d=0 p=4 Oct 3 04:43:32.141668 (XEN) 2 [0/0/ - ]: s=5 n=0 x=0 v=2 Oct 3 04:43:32.141693 (XEN) 3 [0/0/ - ]: s=5 n=1 x=0 v=3 Oct 3 04:43:32.153837 (XEN) 4 [0/0/ - ]: s=3 n=0 x=0 d=0 p=1 Oct 3 04:43:32.153909 (XEN) 5 [0/0/ - ]: s=3 n=1 x=0 d=0 p=6 Oct 3 04:43:32.153971 (XEN) 6 [0/0/ - ]: s=3 n=0 x=0 d=0 p=5 Oct 3 04:43:32.165675 Oct 3 04:43:34.092428 (XEN) gnttab_usage_print_all [ key 'g' pressed Oct 3 04:43:34.113793 (XEN) -------- active -------- -------- shared -------- Oct 3 04:43:34.113828 (XEN) [ref] localdo Oct 3 04:43:34.115867 m mfn pin localdom gmfn flags Oct 3 04:43:34.125735 (XEN) grant-table for remote d0 (v1) Oct 3 04:43:34.125790 (XEN) 2 frames (64 max), 5 maptrack frames (1024 max) Oct 3 04:43:34.137717 (XEN) [0x208] 0 0x6420b 0x00000001 0 0x06420b 0x19 Oct 3 04:43:34.137748 (XEN) [0x209] 0 0x64314 0x00000001 0 0x064314 0x19 Oct 3 04:43:34.137775 (XEN) gnttab_usage_print_all ] done Oct 3 04:43:34.149642 Oct 3 04:43:36.078178 Oct 3 04:43:37.850711 Oct 3 04:43:38.079238 (XEN) Physical memory information: Oct 3 04:43:38.101735 (XEN) Xen heap: 65084kB free Oct 3 04:43:38.101787 (XEN) heap[19]: 523340kB free Oct 3 04:43:38.101832 (XEN) heap[20]: 966436kB fr Oct 3 04:43:38.104174 ee Oct 3 04:43:38.113684 (XEN) Dom heap: 1489776kB free Oct 3 04:43:38.113715 Oct 3 04:43:40.099507 Oct 3 04:43:41.863423 Oct 3 04:43:42.082330 (XEN) sched_smt_power_savings: disabled Oct 3 04:43:42.102558 (XEN) NOW=1655335725000 Oct 3 04:43:42.102590 (XEN) Online Cpus: 0-1 Oct 3 04:43:42.102621 (XEN) Cpupool 0: Oct 3 04:43:42.102644 (X Oct 3 04:43:42.104656 EN) Cpus: 0-1 Oct 3 04:43:42.116846 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Oct 3 04:43:42.116846 (XEN) Scheduler: SMP Credit Scheduler (credit) Oct 3 04:43:42.116846 (XEN) info: Oct 3 04:43:42.116846 (XEN) ncpus = 2 Oct 3 04:43:42.128766 (XEN) master = 0 Oct 3 04:43:42.128766 (XEN) credit = 600 Oct 3 04:43:42.128766 (XEN) credit balance = 298 Oct 3 04:43:42.128766 (XEN) weight = 0 Oct 3 04:43:42.128766 (XEN) runq_sort = 50546 Oct 3 04:43:42.140498 (XEN) default-weight = 256 Oct 3 04:43:42.140498 (XEN) tslice = 30ms Oct 3 04:43:42.140498 (XEN) ratelimit = 1000us Oct 3 04:43:42.140498 (XEN) credits per msec = 10 Oct 3 04:43:42.152758 (XEN) ticks per tslice = 3 Oct 3 04:43:42.152758 (XEN) migration delay = 0us Oct 3 04:43:42.152758 (XEN) idlers: 2 Oct 3 04:43:42.152758 (XEN) active units: Oct 3 04:43:42.152758 (XEN) CPUs info: Oct 3 04:43:42.164798 (XEN) CPU[00] current=d[IDLE]v0, curr=d[IDLE]v0, prev=NULL Oct 3 04:43:42.164798 (XEN) CPU[00] nr_run=0, sort=50536, sibling={0}, core={0-1} Oct 3 04:43:42.164798 (XEN) CPU[01] current=d[IDLE]v1, curr=d[IDLE]v1, prev=NULL Oct 3 04:43:42.176779 (XEN) CPU[01] nr_run=1, sort=50546, sibling={1}, core={0-1} Oct 3 04:43:42.176779 (XEN) 1: [0.0] pri=0 flags=0 cpu=1 credit=298 [w=256,cap=0] Oct 3 04:43:42.188719 Oct 3 04:43:44.106652 Oct 3 04:43:45.872789 Oct 3 04:43:46.084594 (XEN) Synced stime skew: max=84ns avg=84ns samples=1 current=84ns Oct 3 04:43:46.101634 (XEN) Synced cycles skew: max=1 avg=1 samples=1 current=1 Oct 3 04:43:46.101634 Oct 3 04:43:46.102777 Oct 3 04:43:48.081779 Oct 3 04:43:49.880565 Oct 3 04:43:50.074464 Oct 3 04:43:51.886504 Oct 3 04:43:52.139438 Oct 3 04:43:53.893247 Oct 3 04:44:04.139911 (XEN) 'q' pressed -> dumping domain info (now = 1677396712500) Oct 3 04:44:04.161780 (XEN) General information Oct 3 04:44:04.163472 for domain 0: Oct 3 04:44:04.173723 (XEN) refcnt=3 dying=0 pause_count=0 Oct 3 04:44:04.173780 (XEN) nr_pages=131072 xenheap_pages=3 dirty_cpus={} max_pages=131072 Oct 3 04:44:04.173840 (XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=00000020 Oct 3 04:44:04.185724 (XEN) p2m mappings for domain 0 (vmid 1): Oct 3 04:44:04.185724 (XEN) 1G mappings: 0 (shattered 0) Oct 3 04:44:04.197688 (XEN) 2M mappings: 237 (shattered 19) Oct 3 04:44:04.197688 (XEN) 4K mappings: 4762 Oct 3 04:44:04.197688 (XEN) Rangesets belonging to domain 0: Oct 3 04:44:04.197688 (XEN) Interrupts { 32-72, 74, 77-79, 82-84, 86, 88-100, 103-104, 107-110, 114, 116-120, 123, 126-128, 138, 144, 146-147, 149-151, 156 } Oct 3 04:44:04.209678 (XEN) I/O Memory { 2020-2050, 3810-3811, 3830-3831, 3860-3861, 10000-10001, 10010-10045, 10050-10055, 10060-10061, 101b0-101b1, 101d0-101d1, 101e0-101e1, 10440-10441, 10800-10801, 10830-10831, 10850-10851, 10a60-10a61, 10d10-10d11, 11000-11010, 11200-11201, 11210-11211, 11400-11401, 11800-11805, 11c00-11c01, 11c10-11c11, 11d40-11d41, 11f20-11f21, 12000-12010, 12100-12101, 12110-12111, 12120-12121, 12130-12131, 12170-12171, 121a0-121a1, 121b0-121b1, 121d0-121d1, 12200-12201, 12210-12211, 12220-12221, 12230-12231, 12250-12251, 122f0-122f1, 12c00-12c01, 12c10-12c11, 12c30-12c31, 12c60-12c61, 12c70-12c71, 12c80-12c81, 12c90-12c91, 12ca0-12ca1, 12cb0-12cb1, 12cc0-12cc1, 12cd0-12cd1, 12ce0-12ce1, 12d10-12d11, 12d20-12d21, 12d30-12d31, 12d40-12d41, 12d60-12d61, 12d70-12d71, 12dd0-12dd1, 13260-13261, 13270-13271, 13280-13281, 13290-13291, 132a0-132a1, 132b0-132b1, 132c0-132c1, 132d0-132d1, 132e0-132e1, 132f0-132f1, 13400-13401, 13c40-13c41, 13c50-13c51, 13e00-13e01, 13e10-13e11, 13e20-13e21, 13e30-13e31, 13e80-13e81, 13e90-13e91, 13ea0-13ea1, 13eb0-13eb1, 14400-14440, 14450-14460, 14500-14510, 14530-145a0, 145b0-145b1, 14640-14641, 14650-14651 } Oct 3 04:44:04.317800 (XEN) NODE affinity for domain 0: [0] Oct 3 04:44:04.317861 (XEN) VCPU information and callbacks for domain 0: Oct 3 04:44:04.317908 (XEN) UNIT0 affinities: hard={0-1} soft={0-1} Oct 3 04:44:04.329745 (XEN) VCPU0: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 04:44:04.329745 (XEN) pause_count=0 pause_flags=1 Oct 3 04:44:04.341788 (XEN) GICH_LRs (vcpu 0) mask=0 Oct 3 04:44:04.341851 (XEN) VCPU_LR[0]=0 Oct 3 04:44:04.341893 (XEN) VCPU_LR[1]=0 Oct 3 04:44:04.341934 (XEN) VCPU_LR[2]=0 Oct 3 04:44:04.341975 (XEN) VCPU_LR[3]=0 Oct 3 04:44:04.342015 (XEN) No periodic timer Oct 3 04:44:04.353786 (XEN) UNIT1 affinities: hard={0-1} soft={0-1} Oct 3 04:44:04.353855 (XEN) VCPU1: CPU0 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 04:44:04.353907 (XEN) pause_count=0 pause_flags=0 Oct 3 04:44:04.365730 (XEN) GICH_LRs (vcpu 1) mask=0 Oct 3 04:44:04.365780 (XEN) VCPU_LR[0]=0 Oct 3 04:44:04.365822 (XEN) VCPU_LR[1]=0 Oct 3 04:44:04.365862 (XEN) VCPU_LR[2]=0 Oct 3 04:44:04.377778 (XEN) VCPU_LR[3]=0 Oct 3 04:44:04.377836 (XEN) Inflight irq=27 lr=255 Oct 3 04:44:04.377880 (XEN) Pending irq=27 Oct 3 04:44:04.377922 (XEN) No periodic timer Oct 3 04:44:04.377963 (XEN) Notifying guest 0:0 (virq 1, port 0) Oct 3 04:44:04.389709 (XEN) Notifying guest 0:1 (virq 1, port 0) Oct 3 04:44:04.389769 Oct 3 04:44:16.140104 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 04:44:16.157835 Oct 3 04:44:16.157835 arndale-westfield login: Oct 3 04:44:16.159552 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 04:45:10.096850 [ 1768.999161] vif vif-1: 5 starting transaction Oct 3 04:45:41.041796 [ 1769.002203] vif vif-1: 5 starting transaction Oct 3 04:45:41.066251 [ 1774.010288] xenbus_probe_frontend: xenbus_frontend_dev_shutdown: device/vif/1 timeout closing device Oct 3 04:45:46.049803 [ 1774.018221] sd 0:0:0:0: [sda] Synchronizing SCSI cache Oct 3 04:45:46.049883 [ 1774.027703] wake enabled for irq 119 (gpx1-4) Oct 3 04:45:46.061754 [ 1774.030742] wake enabled for irq 120 (gpx1-5) Oct 3 04:45:46.061851 [ 1774.035115] wake enabled for irq 121 (gpx1-6) Oct 3 04:45:46.073772 [ 1774.039542] wake enabled for irq 122 (gpx1-7) Oct 3 04:45:46.073834 [ 1774.043986] wake enabled for irq 123 (gpx2-0) Oct 3 04:45:46.085734 [ 1774.048396] wake enabled for irq 124 (gpx2-1) Oct 3 04:45:46.085796 [ 1774.053254] reboot: Resô Oct 3 04:45:46.421705 Oct 3 04:45:46.421728 Oct 3 04:45:46.421794 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 04:45:46.433765 Oct 3 04:45:46.433818 CPU: Exynos5250@1000MHz Oct 3 04:45:46.433863 Oct 3 04:45:46.433902 Board: Arndale Oct 3 04:45:46.433943 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 04:45:46.433991 ready Oct 3 04:45:46.434030 DRAM: 2 GiB Oct 3 04:45:46.445693 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 04:45:46.457723 trace: enabled Oct 3 04:45:46.493699 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 04:45:46.853716 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 04:45:46.913800 In: serial Oct 3 04:45:46.913875 Out: serial Oct 3 04:45:46.913917 Err: serial Oct 3 04:45:46.925694 SCSI: ARNDALE SCSI INIT Oct 3 04:45:46.925726 Target spinup took 0 ms. Oct 3 04:45:46.925751 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 04:45:46.937794 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 04:45:46.937858 Net: Net Initialization Skipped Oct 3 04:45:46.937903 No ethernet found. Oct 3 04:45:46.937943 Hostname: arndale-westfield Oct 3 04:45:46.949724 Hit any key to stop autoboot: 2  1  0 Oct 3 04:45:48.869737 (Re)start USB... Oct 3 04:45:48.869801 USB0: USB EHCI 1.00 Oct 3 04:45:48.869844 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 04:45:54.465703 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 04:45:54.477735 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 04:45:54.921724 Waiting for Ethernet connection... done. Oct 3 04:45:56.565712 BOOTP broadcast 1 Oct 3 04:45:56.565768 BOOTP broadcast 2 Oct 3 04:45:57.861753 DHCP client bound to address 10.149.64.45 (1350 ms) Oct 3 04:45:57.861823 Using asx0 device Oct 3 04:45:57.873749 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 04:45:57.873812 Filename 'pxelinux.0'. Oct 3 04:45:57.873855 Load address: 0x43e00000 Oct 3 04:45:57.873897 Loading: *### Oct 3 04:45:57.897729 2.2 MiB/s Oct 3 04:45:57.897784 done Oct 3 04:45:57.897825 Bytes transferred = 42430 (a5be hex) Oct 3 04:45:57.897870 missing environment variable: pxeuuid Oct 3 04:45:57.897913 Retrieving file: pxelinux.cfg/0A95402D Oct 3 04:45:57.909761 Using asx0 device Oct 3 04:45:57.909815 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 04:45:57.909865 Filename 'pxelinux.cfg/0A95402D'. Oct 3 04:45:57.921748 Load address: 0x51000000 Oct 3 04:45:57.921804 Loading: *# Oct 3 04:45:57.921845 355.5 KiB/s Oct 3 04:45:57.921886 done Oct 3 04:45:57.921924 Bytes transferred = 728 (2d8 hex) Oct 3 04:45:57.921967 Config file found Oct 3 04:45:57.922007 Ignoring unknown command: serial Oct 3 04:45:57.933754 1: ^Overwrite Oct 3 04:45:57.933809 Retrieving file: /osstest/tmp//arndale-westfield--initrd.gz Oct 3 04:45:57.933858 Using asx0 device Oct 3 04:45:57.933899 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 04:45:57.945764 Filename '/osstest/tmp//arndale-westfield--initrd.gz'. Oct 3 04:45:57.945825 Load address: 0x43300000 Oct 3 04:45:57.945868 Loading: *################################################################# Oct 3 04:45:58.257581 ################################################################# Oct 3 04:45:58.581653 ################################################################# Oct 3 04:45:58.893718 ################################################################# Oct 3 04:45:59.205723 ################################################################# Oct 3 04:45:59.517620 ################################################################# Oct 3 04:45:59.841647 ################################################################# Oct 3 04:46:00.177711 ################################################################# Oct 3 04:46:00.477639 ################################################################# Oct 3 04:46:00.777633 ################################################################# Oct 3 04:46:01.089650 ################################################################# Oct 3 04:46:01.416720 ################################################################# Oct 3 04:46:01.732605 ################################################################# Oct 3 04:46:02.040639 ################################################################# Oct 3 04:46:02.328888 ################################################################# Oct 3 04:46:02.628566 ################################################################# Oct 3 04:46:02.932666 ################################################################# Oct 3 04:46:03.244826 ################################################################# Oct 3 04:46:03.540758 ################################################################# Oct 3 04:46:03.840750 ################################################################# Oct 3 04:46:04.140804 ################################################################# Oct 3 04:46:04.432649 ################################################################# Oct 3 04:46:04.756665 ################################################################# Oct 3 04:46:05.056618 ################################################################# Oct 3 04:46:05.369713 ################################################################# Oct 3 04:46:05.669652 ################################################################# Oct 3 04:46:05.957662 ################################################################# Oct 3 04:46:06.257664 ######################################## Oct 3 04:46:06.449703 2.8 MiB/s Oct 3 04:46:06.449759 done Oct 3 04:46:06.449800 Bytes transferred = 26339182 (191e76e hex) Oct 3 04:46:06.449846 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/linux Oct 3 04:46:06.461802 Using asx0 device Oct 3 04:46:06.473958 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 04:46:06.474021 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/linux'. Oct 3 04:46:06.474073 Load address: 0x42000000 Oct 3 04:46:06.485964 Loading: *################################################################# Oct 3 04:46:06.809918 ################################################################# Oct 3 04:46:07.133897 ################################################################# Oct 3 04:46:07.457867 ################################################################# Oct 3 04:46:07.781687 ################################################################# Oct 3 04:46:08.105621 ############################################# Oct 3 04:46:08.333636 2.7 MiB/s Oct 3 04:46:08.333669 done Oct 3 04:46:08.333690 Bytes transferred = 5427712 (52d200 hex) Oct 3 04:46:08.333715 append: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=40384 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 04:46:08.381696 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb Oct 3 04:46:08.381741 Using asx0 device Oct 3 04:46:08.393637 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 04:46:08.393641 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb'. Oct 3 04:46:08.405619 Load address: 0x43000000 Oct 3 04:46:08.405642 Loading: *#### Oct 3 04:46:08.417622 2.5 MiB/s Oct 3 04:46:08.417652 done Oct 3 04:46:08.417674 Bytes transferred = 46686 (b65e hex) Oct 3 04:46:08.429685 Kernel image @ 0x42000000 [ 0x000000 - 0x52d200 ] Oct 3 04:46:08.429718 ## Flattened Device Tree blob at 43000000 Oct 3 04:46:08.429743 Booting using the fdt blob at 0x43000000 Oct 3 04:46:08.441709 Loading Ramdisk to 4e6e1000, end 4ffff76e ... OK Oct 3 04:46:08.861774 Loading Device Tree to 4e6d2000, end 4e6e065d ... OK Oct 3 04:46:08.873773 Oct 3 04:46:08.873825 Starting kernel ...(fake run for tracing) Oct 3 04:46:08.873872 Oct 3 04:46:08.873910 Oct 3 04:46:08.885716 Starting kernel ... Oct 3 04:46:08.885773 Oct 3 04:46:08.885812 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 04:46:14.932821 [ 0.000000] Linux version 6.1.0-25-armmp (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.106-3 (2024-08-26) Oct 3 04:46:14.956803 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 04:46:14.956803 [ 0.000000] CPU: div instructions available: patching division code Oct 3 04:46:14.968840 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 04:46:14.968840 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 04:46:14.980824 [ 0.000000] Memory policy: Data cache writealloc Oct 3 04:46:14.980824 [ 0.000000] efi: UEFI not found. Oct 3 04:46:14.992823 [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 Oct 3 04:46:14.992823 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 04:46:14.992823 [ 0.000000] Zone ranges: Oct 3 04:46:14.992823 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 04:46:15.001778 [ 0.000000] Normal empty Oct 3 04:46:15.001834 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 04:46:15.013782 [ 0.000000] Movable zone start for each node Oct 3 04:46:15.013842 [ 0.000000] Early memory node ranges Oct 3 04:46:15.013887 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 04:46:15.025757 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 04:46:15.025822 [ 0.000000] percpu: Embedded 18 pages/cpu s44692 r8192 d20844 u73728 Oct 3 04:46:15.040825 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 04:46:15.052893 [ 0.000000] Kernel command line: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=40384 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 04:46:15.088822 [ 0.000000] Unknown kernel command line parameters "preseed --- vga=normal auto=true hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=40384 domain=test-lab.xenproject.org", will be passed to user space. Oct 3 04:46:15.124804 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 04:46:15.136801 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 04:46:15.149187 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 04:46:15.149305 [ 0.000000] Memory: 2015968K/2097152K available (11264K kernel code, 1696K rwdata, 3724K rodata, 2048K init, 376K bss, 64800K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 04:46:15.160973 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 04:46:15.172934 [ 0.000000] ftrace: allocating 39612 entries in 117 pages Oct 3 04:46:15.172934 [ 0.000000] ftrace: allocated 117 pages with 5 groups Oct 3 04:46:15.184944 [ 0.000000] trace event string verifier disabled Oct 3 04:46:15.184944 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 04:46:15.196959 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 04:46:15.196959 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 04:46:15.208948 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 04:46:15.208948 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 04:46:15.220962 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 04:46:15.220962 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 04:46:15.232924 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 04:46:15.232924 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 04:46:15.244923 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 04:46:15.244923 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 04:46:15.256914 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 04:46:15.256914 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 04:46:15.268926 [ 0.000017] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 04:46:15.280916 [ 0.002613] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 04:46:15.280916 [ 0.002627] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 04:46:15.292929 [ 0.002642] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 04:46:15.304930 [ 0.002655] Ignoring duplicate/late registration of read_current_timer delay Oct 3 04:46:15.304930 [ 0.003013] Console: colour dummy device 80x30 Oct 3 04:46:15.316911 [ 0.003052] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 04:46:15.328888 [ 0.003065] CPU: Testing write buffer coherency: ok Oct 3 04:46:15.328888 [ 0.003108] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 04:46:15.340912 [ 0.003116] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 04:46:15.340912 [ 0.003123] pid_max: default: 32768 minimum: 301 Oct 3 04:46:15.353065 [ 0.003484] LSM: Security Framework initializing Oct 3 04:46:15.353132 [ 0.003556] landlock: Up and running. Oct 3 04:46:15.353178 [ 0.003561] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 04:46:15.364908 [ 0.003744] AppArmor: AppArmor initialized Oct 3 04:46:15.364908 [ 0.003756] TOMOYO Linux initialized Oct 3 04:46:15.376951 [ 0.003801] LSM support for eBPF active Oct 3 04:46:15.376951 [ 0.004044] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 04:46:15.376951 [ 0.004058] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 04:46:15.388914 [ 0.005490] /cpus/cpu@0 missing clock-frequency property Oct 3 04:46:15.400946 [ 0.005519] /cpus/cpu@1 missing clock-frequency property Oct 3 04:46:15.400946 [ 0.005532] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 04:46:15.400946 [ 0.006487] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 04:46:15.412946 [ 0.006494] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 04:46:15.424894 [ 0.006598] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 04:46:15.424894 [ 0.006603] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 04:46:15.440946 [ 0.006748] Setting up static identity map for 0x40300000 - 0x403000ac Oct 3 04:46:15.440946 [ 0.007904] rcu: Hierarchical SRCU implementation. Oct 3 04:46:15.440946 [ 0.007909] rcu: Max phase no-delay instances is 1000. Oct 3 04:46:15.452917 [ 0.010031] EFI services will not be available. Oct 3 04:46:15.452917 [ 0.010375] smp: Bringing up secondary CPUs ... Oct 3 04:46:15.452917 [ 0.011120] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 04:46:15.464955 [ 0.011132] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 04:46:15.476913 [ 0.011273] smp: Brought up 1 node, 2 CPUs Oct 3 04:46:15.476913 [ 0.011281] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 04:46:15.488947 [ 0.011289] CPU: All CPU(s) started in HYP mode. Oct 3 04:46:15.488947 [ 0.011293] CPU: Virtualization extensions available. Oct 3 04:46:15.488947 [ 0.011918] devtmpfs: initialized Oct 3 04:46:15.500892 [ 0.023286] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 04:46:15.500948 [ 0.023519] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 04:46:15.512915 [ 0.023544] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 04:46:15.524912 [ 0.024081] pinctrl core: initialized pinctrl subsystem Oct 3 04:46:15.524912 [ 0.024790] DMI not present or invalid. Oct 3 04:46:15.524912 [ 0.025465] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 04:46:15.536902 [ 0.030893] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 04:46:15.536902 [ 0.032451] audit: initializing netlink subsys (disabled) Oct 3 04:46:15.548885 [ 0.032652] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 Oct 3 04:46:15.560911 [ 0.033803] thermal_sys: Registered thermal governor 'fair_share' Oct 3 04:46:15.560911 [ 0.033810] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 04:46:15.572920 [ 0.033814] thermal_sys: Registered thermal governor 'step_wise' Oct 3 04:46:15.572920 [ 0.033819] thermal_sys: Registered thermal governor 'user_space' Oct 3 04:46:15.584922 [ 0.033823] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 04:46:15.584922 [ 0.034195] No ATAGs? Oct 3 04:46:15.584922 [ 0.034263] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 04:46:15.594967 [ 0.034271] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 04:46:15.608978 [ 0.035352] Serial: AMBA PL011 UART driver Oct 3 04:46:15.608978 [ 0.084782] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 04:46:15.608978 [ 0.091802] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 04:46:15.620965 [ 0.103191] iommu: Default domain type: Translated Oct 3 04:46:15.633071 [ 0.103200] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 04:46:15.633140 [ 0.104150] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 04:46:15.645109 [ 0.104679] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 04:46:15.645171 [ 0.104690] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 04:46:15.645220 [ 0.105205] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 04:46:15.655996 [ 0.105235] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 04:46:15.667023 [ 0.105417] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 04:46:15.680978 [ 0.105774] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 04:46:15.680978 [ 0.105784] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 04:46:15.680978 [ 0.106193] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 04:46:15.692934 [ 0.106482] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 04:46:15.692934 [ 0.106491] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 04:46:15.704966 [ 0.106770] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 04:46:15.704966 [ 0.106867] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 04:46:15.704966 [ 0.106876] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 04:46:15.716960 [ 0.107074] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 04:46:15.716960 [ 0.107458] pps_core: LinuxPPS API ver. 1 registered Oct 3 04:46:15.728953 [ 0.107464] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 04:46:15.741014 [ 0.107479] PTP clock support registered Oct 3 04:46:15.741084 [ 0.108928] NetLabel: Initializing Oct 3 04:46:15.741103 [ 0.108934] NetLabel: domain hash size = 128 Oct 3 04:46:15.756977 [ 0.108939] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 04:46:15.756977 [ 0.108994] NetLabel: unlabeled traffic allowed by default Oct 3 04:46:15.756977 [ 0.109183] vgaarb: loaded Oct 3 04:46:15.756977 [ 0.109797] clocksource: Switched to clocksource mct-frc Oct 3 04:46:15.768935 [ 0.110418] VFS: Disk quotas dquot_6.6.0 Oct 3 04:46:15.768935 [ 0.110506] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 04:46:15.780933 [ 0.111304] AppArmor: AppArmor Filesystem Enabled Oct 3 04:46:15.780933 [ 0.121273] NET: Registered PF_INET protocol family Oct 3 04:46:15.780933 [ 0.121493] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 04:46:15.792990 [ 0.123122] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 04:46:15.804929 [ 0.123224] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 04:46:15.804929 [ 0.123249] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 04:46:15.820956 [ 0.123350] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 04:46:15.820956 [ 0.123580] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 04:46:15.833031 [ 0.123803] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 04:46:15.833046 [ 0.123895] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 04:46:15.844943 [ 0.123936] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 04:46:15.857021 [ 0.124138] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 04:46:15.857028 [ 0.124173] NET: Registered PF_XDP protocol family Oct 3 04:46:15.857028 [ 0.124184] PCI: CLS 0 bytes, default 64 Oct 3 04:46:15.868913 [ 0.125312] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 04:46:15.868913 [ 0.125566] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 04:46:15.881046 [ 0.130162] Trying to unpack rootfs image as initramfs... Oct 3 04:46:15.892938 [ 0.184074] Initialise system trusted keyrings Oct 3 04:46:15.892938 [ 0.184176] Key type blacklist registered Oct 3 04:46:15.892938 [ 0.184430] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 04:46:15.904930 [ 0.195660] zbud: loaded Oct 3 04:46:15.904930 [ 0.196874] integrity: Platform Keyring initialized Oct 3 04:46:15.904930 [ 0.196904] integrity: Machine keyring initialized Oct 3 04:46:15.916943 [ 0.196912] Key type asymmetric registered Oct 3 04:46:15.916943 [ 0.196918] Asymmetric key parser 'x509' registered Oct 3 04:46:15.928950 [ 1.502769] Freeing initrd memory: 25724K Oct 3 04:46:15.928950 [ 1.514388] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 04:46:15.928950 [ 1.514683] bounce: pool size: 64 pages Oct 3 04:46:15.940739 [ 1.514867] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 04:46:15.940814 [ 1.515043] io scheduler mq-deadline registered Oct 3 04:46:15.952967 [ 1.520111] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 04:46:15.952967 [ 1.540721] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 04:46:15.964961 [ 1.540734] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 04:46:15.976939 [ 1.543024] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 04:46:15.976939 [ 1.543034] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 04:46:15.988947 [ 1.543896] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 04:46:16.000945 [ 1.543905] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 04:46:16.012934 [ 1.544726] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 04:46:16.012934 [ 1.544735] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 04:46:16.024962 [ 1.547100] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 04:46:16.036945 [ 1.549940] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 04:46:16.036945 [ 1.552615] Serial: AMBA driver Oct 3 04:46:16.048939 [ 1.552839] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 04:46:16.048939 [ 1.553313] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 04:46:16.060941 [ 1.553873] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 04:46:16.072941 [ 2.691980] printk: console [ttySAC2] enabled Oct 3 04:46:16.072941 [ 2.696802] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 04:46:16.085058 [ 2.707440] STM32 USART driver initialized Oct 3 04:46:16.085118 [ 2.721558] mousedev: PS/2 mouse device common for all mice Oct 3 04:46:16.108879 [ 2.752884] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 04:46:16.133021 [ 2.761507] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T04:46:18 UTC (1727930778) Oct 3 04:46:16.144955 [ 2.771350] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 04:46:16.156902 [ 2.778816] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 04:46:16.156902 [ 2.786834] NET: Registered PF_INET6 protocol family Oct 3 04:46:16.168900 [ 2.800498] Segment Routing with IPv6 Oct 3 04:46:16.180917 [ 2.802763] In-situ OAM (IOAM) with IPv6 Oct 3 04:46:16.180917 [ 2.806686] mip6: Mobile IPv6 Oct 3 04:46:16.192961 [ 2.809554] NET: Registered PF_PACKET protocol family Oct 3 04:46:16.192961 [ 2.814703] mpls_gso: MPLS GSO support Oct 3 04:46:16.192961 [ 2.818943] ThumbEE CPU extension supported. Oct 3 04:46:16.204930 [ 2.822595] Registering SWP/SWPB emulation handler Oct 3 04:46:16.204930 [ 2.827870] registered taskstats version 1 Oct 3 04:46:16.204930 [ 2.831479] Loading compiled-in X.509 certificates Oct 3 04:46:16.216904 [ 3.291941] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 04:46:16.676965 [ 3.299257] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 04:46:16.688940 [ 3.310293] zswap: loaded using pool lzo/zbud Oct 3 04:46:16.688940 [ 3.314325] Key type .fscrypt registered Oct 3 04:46:16.700894 [ 3.317564] Key type fscrypt-provisioning registered Oct 3 04:46:16.700894 [ 3.331309] Key type encrypted registered Oct 3 04:46:16.713046 [ 3.333930] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 04:46:16.713046 [ 3.339395] ima: No TPM chip found, activating TPM-bypass! Oct 3 04:46:16.724960 [ 3.344819] ima: Allocated hash algorithm: sha256 Oct 3 04:46:16.724960 [ 3.349520] ima: No architecture policies found Oct 3 04:46:16.736967 [ 3.354056] evm: Initialising EVM extended attributes: Oct 3 04:46:16.736967 [ 3.359124] evm: security.selinux Oct 3 04:46:16.736967 [ 3.362420] evm: security.SMACK64 (disabled) Oct 3 04:46:16.749074 [ 3.366674] evm: security.SMACK64EXEC (disabled) Oct 3 04:46:16.749074 [ 3.371273] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 04:46:16.749074 [ 3.376307] evm: security.SMACK64MMAP (disabled) Oct 3 04:46:16.761099 [ 3.380908] evm: security.apparmor Oct 3 04:46:16.761177 [ 3.384293] evm: security.ima Oct 3 04:46:16.761195 [ 3.387245] evm: security.capability Oct 3 04:46:16.772916 [ 3.390809] evm: HMAC attrs: 0x1 Oct 3 04:46:16.772916 [ 3.978548] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 04:46:17.356881 [ 3.984555] clk: Disabling unused clocks Oct 3 04:46:17.368866 [ 3.998291] Freeing unused kernel image (initmem) memory: 2048K Oct 3 04:46:17.380910 [ 4.003164] Checked W+X mappings: passed, no W+X pages found Oct 3 04:46:17.380910 [ 4.008416] Run /init as init process Oct 3 04:46:17.392860 [ 4.554754] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 04:46:17.933095 [ 4.619273] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 04:46:18.004893 [ 4.637257] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 04:46:18.016952 [ 4.649510] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 04:46:18.028941 [ 4.658021] usbcore: registered new interface driver usbfs Oct 3 04:46:18.041002 [ 4.665759] usbcore: registered new interface driver hub Oct 3 04:46:18.052864 [ 4.710676] usbcore: registered new device driver usb Oct 3 04:46:18.088909 [ 4.733778] phy phy-12130000.phy.1: phy_power_on was called before phy_init Oct 3 04:46:18.112922 [ 4.739501] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 04:46:18.125070 [ 4.745510] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 04:46:18.125137 [ 4.749915] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Oct 3 04:46:18.136966 [ 4.758179] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Oct 3 04:46:18.136966 [ 4.790893] phy phy-12130000.phy.1: phy_power_on was called before phy_init Oct 3 04:46:18.172946 [ 4.798675] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 04:46:18.184901 [ 4.814306] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 04:46:18.196961 [ 4.821183] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 04:46:18.208966 [ 4.828349] usb usb1: Product: EHCI Host Controller Oct 3 04:46:18.208966 [ 4.833219] usb usb1: Manufacturer: Linux 6.1.0-25-armmp ehci_hcd Oct 3 04:46:18.220962 [ 4.835214] exynos-ohci 12120000.usb: USB Host Controller Oct 3 04:46:18.220962 [ 4.839282] usb usb1: SerialNumber: 12110000.usb Oct 3 04:46:18.232940 [ 4.844764] usb3503 usb-hub: switched to HUB mode Oct 3 04:46:18.232940 [ 4.853979] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 04:46:18.232940 [ 4.895360] hub 1-0:1.0: USB hub found Oct 3 04:46:18.280896 [ 4.903712] hub 1-0:1.0: 3 ports detected Oct 3 04:46:18.280896 [ 4.913679] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Oct 3 04:46:18.292895 [ 4.924326] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Oct 3 04:46:18.304885 [ 4.994136] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 04:46:18.376919 [ 5.000965] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 04:46:18.388960 [ 5.008166] usb usb2: Product: USB Host Controller Oct 3 04:46:18.388960 [ 5.012926] usb usb2: Manufacturer: Linux 6.1.0-25-armmp ohci_hcd Oct 3 04:46:18.400962 [ 5.019001] usb usb2: SerialNumber: 12120000.usb Oct 3 04:46:18.400962 [ 5.024233] hub 2-0:1.0: USB hub found Oct 3 04:46:18.400962 [ 5.027372] hub 2-0:1.0: 3 ports detected Oct 3 04:46:18.412904 [ 5.081206] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 04:46:18.460949 [ 5.085375] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 04:46:18.472947 [ 5.096933] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 04:46:18.484950 [ 5.104931] xhci-hcd xhci-hcd.2.auto: irq 108, io mem 0x12000000 Oct 3 04:46:18.484950 [ 5.111295] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 04:46:18.496954 [ 5.116356] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 04:46:18.496954 [ 5.123999] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 04:46:18.508961 [ 5.130647] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 04:46:18.520964 [ 5.138736] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 04:46:18.520964 [ 5.145932] usb usb3: Product: xHCI Host Controller Oct 3 04:46:18.532916 [ 5.150799] usb usb3: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 04:46:18.532916 [ 5.156881] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 04:46:18.545019 [ 5.162333] hub 3-0:1.0: USB hub found Oct 3 04:46:18.545082 [ 5.165487] hub 3-0:1.0: 1 port detected Oct 3 04:46:18.545128 [ 5.169853] usb 1-3: new high-speed USB device number 2 using exynos-ehci Oct 3 04:46:18.556942 [ 5.176199] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 04:46:18.556942 [ 5.184420] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 04:46:18.568945 [ 5.192477] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 04:46:18.580942 [ 5.199676] usb usb4: Product: xHCI Host Controller Oct 3 04:46:18.580942 [ 5.204530] usb usb4: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 04:46:18.593039 [ 5.210608] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 04:46:18.593039 [ 5.216138] hub 4-0:1.0: USB hub found Oct 3 04:46:18.593039 [ 5.219235] hub 4-0:1.0: 1 port detected Oct 3 04:46:18.604873 [ 5.376305] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Oct 3 04:46:18.761530 [ 5.383064] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 3 04:46:18.773075 [ 5.392867] hub 1-3:1.0: USB hub found Oct 3 04:46:18.773137 [ 5.395698] hub 1-3:1.0: 3 ports detected Oct 3 04:46:18.773185 Starting system log daemon: syslogd, klogd. Oct 3 04:46:18.797022 /var/run/utmp: No such file or directory Oct 3 04:46:20.620905 [?1h=(B   Oct 3 04:46:20.656959  Oct 3 04:46:20.668941 [  (-*) ][ Oct 03  4:46 ] Oct 3 04:46:20.680893 [  (0*start) ][ Oct 03  4:46 ] Oct 3 04:46:20.692975 [  (0*start) ][ Oct 03  4:46 ] Oct 3 04:46:20.704927 [  (0*start) ][ Oct 03  4:46 ] Oct 3 04:46:20.716946 [  (0*start) ][ Oct 03  4:46 ]                        [  (0*start) ][ Oct 03  4:46 ][  (0*start) ][ Oct 03  4:46 ] Oct 3 04:46:20.776911 [ 0- start  (2*shell) ][ Oct 03  4:46 ] Oct 3 04:46:20.788907 [ 0- start  (2*shell) ][ Oct 03  4:46 ] Oct 3 04:46:20.800950 [ 0- start  (2*shell) ][ Oct 03  4:46 ] Oct 3 04:46:20.812932 [ 0- start  (2*shell) ][ Oct 03  4:46 ]                        [ 0- start  (2*shell) ][ Oct 03  4:46 ][ 0- start  (2*shell) ][ Oct 03  4:46 ] Oct 3 04:46:20.872940 [ 0 start 2- shell  (3*shell) ][ Oct 03  4:46 ] Oct 3 04:46:20.884951 [ 0 start 2- shell  (3*shell) ][ Oct 03  4:46 ] Oct 3 04:46:20.896896 [ 0 start 2- shell  (3*shell) ][ Oct 03  4:46 ] Oct 3 04:46:20.908948 [ 0 start 2- shell  (3*shell) ][ Oct 03  4:46 ]                        [ 0 start 2- shell  (3*shell) ][ Oct 03  4:46 ][ 0 start 2- shell  (3*shell) ][ Oct 03  4:46 ] Oct 3 04:46:20.969138 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  4:46 ] Oct 3 04:46:20.981123 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  4:46 ] Oct 3 04:46:20.993100 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  4:46 ] Oct 3 04:46:21.005140 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  4:46 ]                        [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  4:46 ][ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  4:46 ] Oct 3 04:46:21.065140 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  4:46 ] Oct 3 04:46:21.077120 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  4:46 ] Oct 3 04:46:21.089012 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  4:46 ] Oct 3 04:46:21.101116 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  4:46 ]                        [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  4:46 ][ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  4:46 ] Oct 3 04:46:21.161100 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  4:46 ] Oct 3 04:46:21.173118 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  4:46 ] Oct 3 04:46:21.185118 [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  4:46 ] Oct 3 04:46:21.652893 Detecting network hardware ... 2%... 95%... 100% Oct 3 04:46:23.421055 Detecting link on eth0; please wait... ... 0%... 10%... 20% Oct 3 04:46:28.292859 Waiting for link-local address... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 100% Oct 3 04:46:30.357077 Attempting IPv6 autoconfiguration... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 75%... 83%... 91%... 100% Oct 3 04:46:36.420779 Configuring the network with DHCP ... 0%... 100% Oct 3 04:46:39.580817 Checking the Debian archive mirror ... 25%... 50%... 75%... 100% Oct 3 04:46:47.649746 Loading additional components ... 0%... 10%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  4:47 ]... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Oct 3 04:47:20.901750 Setting up the clock ... 0%... 100% Oct 3 04:47:23.661586 Loading additional components ... 50%... 100% Oct 3 04:47:25.329680 Detecting disks and all other hardware ... 2%... 95%... 100% Oct 3 04:47:29.929702 Loading additional components ... 12%... 25%... 37%... 50%... 62%... 75%... 87%... 100% Oct 3 04:47:36.861836 Loading additional components ... 25%... 50%... 75%... 100% Oct 3 04:47:39.237722 Starting up the partitioner ... 4%... 13%... 21%... 30%... 43%... 52%... 60%... 73%... 82%... 91%... 100% Oct 3 04:47:52.433038 Guided partitioning ... 16%... 33%... 50%... 66%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  4:48 ]... 83%... 100% Oct 3 04:48:00.700893 Starting up the partitioner ... 4%... 12%... 20%... 32%... 40%... 52%... 60%... 72%... 80%... 92%... 100% Oct 3 04:48:11.689686 Partitions formatting ... 33% Oct 3 04:48:20.657734 Partitions formatting Partitions formatting Installing the base system ... 0%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  4:49 ]... 17%... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  4:50 ]... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  4:51 ]... 48%... 50%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  4:52 ]...  Oct 3 04:52:21.117746  60%... 70%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  4:53 ]... 79%... 83%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  4:54 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  4:55 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  4:56 ]... 91%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  4:57 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  4:58 ]... 100% Oct 3 04:58:01.616800 Configuring apt ... 7%... 14%... 14%... 21%... 35%... 42%... 50%... 61%... 71%. Oct 3 04:58:38.977701 ... 82%... 92%... 100% Oct 3 04:58:41.569709 Select and install software ... 1%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  4:59 ]... 10%... 13%... 20%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  5:00 ]... 30%... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  5:01 ]... 50%... Oct 3 05:01:31.348967 . 60%... 70%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  5:02 ]... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  5:03 ]... 88%... 90%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  5:04 ]... 94%... 100% Oct 3 05:04:42.756973 Finishing the installation ... 4%... 12%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  5:05 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  5:06 ]... 16%... 20%... 32%... 40%... 44%... Oct 3 05:06:54.313758  52%... 60%... 72%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  5:07 ]... 80%... 92% The system is going down NOW! Oct 3 05:07:04.741623 Sent SIGTERM Sent SIGKILL to all processes Oct 3 05:07:05.749785 Requesting system reboot Oct 3 05:07:05.749859 [ 1253.403564] reboot: Re˙ Oct 3 05:07:07.105629 Oct 3 05:07:07.105629 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 05:07:07.105629 Oct 3 05:07:07.105629 CPU: Exynos5250@1000MHz Oct 3 05:07:07.117632 Oct 3 05:07:07.117632 Board: Arndale Oct 3 05:07:07.117632 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 05:07:07.117632 ready Oct 3 05:07:07.117632 DRAM: 2 GiB Oct 3 05:07:07.117632 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 05:07:07.141635 trace: enabled Oct 3 05:07:07.177696 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 05:07:07.537788 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 05:07:07.597836 In: serial Oct 3 05:07:07.597892 Out: serial Oct 3 05:07:07.597935 Err: serial Oct 3 05:07:07.597976 SCSI: ARNDALE SCSI INIT Oct 3 05:07:07.598020 Target spinup took 0 ms. Oct 3 05:07:07.609857 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 05:07:07.609921 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 05:07:07.621848 Net: Net Initialization Skipped Oct 3 05:07:07.621909 No ethernet found. Oct 3 05:07:07.621953 Hostname: arndale-westfield Oct 3 05:07:07.621997 Hit any key to stop autoboot: 2  1  0 Oct 3 05:07:09.549769 (Re)start USB... Oct 3 05:07:09.549837 USB0: USB EHCI 1.00 Oct 3 05:07:09.549880 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 05:07:15.145806 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 05:07:15.157712 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 05:07:15.601748 Waiting for Ethernet connection... done. Oct 3 05:07:17.197721 BOOTP broadcast 1 Oct 3 05:07:17.197792 BOOTP broadcast 2 Oct 3 05:07:18.553778 DHCP client bound to address 10.149.64.45 (1409 ms) Oct 3 05:07:18.553830 Using asx0 device Oct 3 05:07:18.553854 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 05:07:18.565681 Filename 'pxelinux.0'. Oct 3 05:07:18.565733 Load address: 0x43e00000 Oct 3 05:07:18.565795 Loading: *### Oct 3 05:07:18.577703 2.5 MiB/s Oct 3 05:07:18.577760 done Oct 3 05:07:18.577793 Bytes transferred = 42430 (a5be hex) Oct 3 05:07:18.589758 missing environment variable: pxeuuid Oct 3 05:07:18.589818 Retrieving file: pxelinux.cfg/0A95402D Oct 3 05:07:18.589903 Using asx0 device Oct 3 05:07:18.589947 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 05:07:18.601754 Filename 'pxelinux.cfg/0A95402D'. Oct 3 05:07:18.601812 Load address: 0x51000000 Oct 3 05:07:18.601856 Loading: *# Oct 3 05:07:18.601897 31.3 KiB/s Oct 3 05:07:18.613769 done Oct 3 05:07:18.613822 Bytes transferred = 65 (41 hex) Oct 3 05:07:18.613867 Config file found Oct 3 05:07:18.613909 Ignoring unknown command: serial Oct 3 05:07:18.613953 1: local Oct 3 05:07:18.613992 scanning bus for devices... Oct 3 05:07:18.614034 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 05:07:18.649757 Type: Hard Disk Oct 3 05:07:18.649813 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 05:07:18.661758 Found 1 device(s). Oct 3 05:07:18.661814 Oct 3 05:07:18.661853 SCSI device 0: Oct 3 05:07:18.661893 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 05:07:18.673637 Type: Hard Disk Oct 3 05:07:18.673665 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 05:07:18.673691 ... is now current device Oct 3 05:07:18.673715 Scanning scsi 0... Oct 3 05:07:18.685586 Found U-Boot script /boot.scr Oct 3 05:07:18.793735 639 bytes read in 38 ms (15.6 KiB/s) Oct 3 05:07:18.841760 ## Executing script at 50000000 Oct 3 05:07:18.841817 Loading dtbs/exynos5250-arndale.dtb Oct 3 05:07:18.841862 46686 bytes read in 722 ms (62.5 KiB/s) Oct 3 05:07:19.561674 Loading vmlinuz-6.1.0-25-armmp-lpae Oct 3 05:07:19.573617 5509632 bytes read in 185 ms (28.4 MiB/s) Oct 3 05:07:19.777753 Loading initrd.img-6.1.0-25-armmp-lpae Oct 3 05:07:19.777825 25732108 bytes read in 1913 ms (12.8 MiB/s) Oct 3 05:07:21.632901 Booting Oct 3 05:07:21.632901 Kernel image @ 0x42000000 [ 0x000000 - 0x541200 ] Oct 3 05:07:21.632901 ## Flattened Device Tree blob at 43000000 Oct 3 05:07:21.644880 Booting using the fdt blob at 0x43000000 Oct 3 05:07:21.644880 Loading Ramdisk to 4e775000, end 4ffff40c ... OK Oct 3 05:07:22.056804 Loading Device Tree to 4e766000, end 4e77465d ... OK Oct 3 05:07:22.068753 Oct 3 05:07:22.068753 Starting kernel ...(fake run for tracing) Oct 3 05:07:22.068753 Oct 3 05:07:22.068753 Oct 3 05:07:22.080769 Starting kernel ... Oct 3 05:07:22.080769 Oct 3 05:07:22.080769 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 05:07:28.220829 [ 0.000000] Linux version 6.1.0-25-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.106-3 (2024-08-26) Oct 3 05:07:28.232829 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=30c5387d Oct 3 05:07:28.244851 [ 0.000000] CPU: div instructions available: patching division code Oct 3 05:07:28.256842 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 05:07:28.256842 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 05:07:28.268945 [ 0.000000] Memory policy: Data cache writealloc Oct 3 05:07:28.268945 [ 0.000000] efi: UEFI not found. Oct 3 05:07:28.268945 [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000 Oct 3 05:07:28.280873 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 05:07:28.280873 [ 0.000000] Zone ranges: Oct 3 05:07:28.280873 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 05:07:28.292849 [ 0.000000] Normal empty Oct 3 05:07:28.292849 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 05:07:28.304854 [ 0.000000] Movable zone start for each node Oct 3 05:07:28.304854 [ 0.000000] Early memory node ranges Oct 3 05:07:28.304854 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 05:07:28.316822 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 05:07:28.316822 [ 0.000000] percpu: Embedded 18 pages/cpu s44820 r8192 d20716 u73728 Oct 3 05:07:28.328823 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 05:07:28.328823 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=ttySAC2,115200n8 Oct 3 05:07:28.340930 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 05:07:28.352854 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 05:07:28.364832 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 05:07:28.364832 [ 0.000000] Memory: 2015504K/2097152K available (12288K kernel code, 1717K rwdata, 3748K rodata, 2048K init, 383K bss, 65264K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 05:07:28.376853 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 05:07:28.388831 [ 0.000000] ftrace: allocating 39996 entries in 118 pages Oct 3 05:07:28.388831 [ 0.000000] ftrace: allocated 118 pages with 5 groups Oct 3 05:07:28.400843 [ 0.000000] trace event string verifier disabled Oct 3 05:07:28.400843 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 05:07:28.412878 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 05:07:28.412878 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 05:07:28.424981 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 05:07:28.425061 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 05:07:28.436939 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 05:07:28.436939 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 05:07:28.448851 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 05:07:28.448851 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 05:07:28.460848 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 05:07:28.460848 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 05:07:28.472843 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 05:07:28.472843 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 05:07:28.484845 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 05:07:28.496847 [ 0.002623] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 05:07:28.496847 [ 0.002638] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 05:07:28.508858 [ 0.002652] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 05:07:28.520864 [ 0.002664] Ignoring duplicate/late registration of read_current_timer delay Oct 3 05:07:28.520864 [ 0.003032] Console: colour dummy device 80x30 Oct 3 05:07:28.532841 [ 0.003073] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 05:07:28.544812 [ 0.003087] CPU: Testing write buffer coherency: ok Oct 3 05:07:28.544812 [ 0.003128] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 05:07:28.556845 [ 0.003137] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 05:07:28.556845 [ 0.003143] pid_max: default: 32768 minimum: 301 Oct 3 05:07:28.568830 [ 0.003512] LSM: Security Framework initializing Oct 3 05:07:28.568830 [ 0.003584] landlock: Up and running. Oct 3 05:07:28.568830 [ 0.003589] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 05:07:28.580828 [ 0.003776] AppArmor: AppArmor initialized Oct 3 05:07:28.580828 [ 0.003788] TOMOYO Linux initialized Oct 3 05:07:28.592819 [ 0.003831] LSM support for eBPF active Oct 3 05:07:28.592819 [ 0.004076] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 05:07:28.592819 [ 0.004090] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 05:07:28.604828 [ 0.005502] /cpus/cpu@0 missing clock-frequency property Oct 3 05:07:28.615549 [ 0.005529] /cpus/cpu@1 missing clock-frequency property Oct 3 05:07:28.615549 [ 0.005542] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 05:07:28.628839 [ 0.006488] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 05:07:28.628839 [ 0.006495] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 05:07:28.640850 [ 0.006595] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 05:07:28.640850 [ 0.006601] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 05:07:28.652835 [ 0.006740] Setting up static identity map for 0x40400000 - 0x404000ac Oct 3 05:07:28.652835 [ 0.007902] rcu: Hierarchical SRCU implementation. Oct 3 05:07:28.664907 [ 0.007907] rcu: Max phase no-delay instances is 1000. Oct 3 05:07:28.664907 [ 0.010036] EFI services will not be available. Oct 3 05:07:28.664907 [ 0.010378] smp: Bringing up secondary CPUs ... Oct 3 05:07:28.676872 [ 0.011116] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 05:07:28.676872 [ 0.011128] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 05:07:28.688855 [ 0.011261] smp: Brought up 1 node, 2 CPUs Oct 3 05:07:28.688855 [ 0.011270] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 05:07:28.700827 [ 0.011278] CPU: All CPU(s) started in HYP mode. Oct 3 05:07:28.700827 [ 0.011281] CPU: Virtualization extensions available. Oct 3 05:07:28.712887 [ 0.012141] devtmpfs: initialized Oct 3 05:07:28.712887 [ 0.023142] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 05:07:28.724899 [ 0.023378] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 05:07:28.724899 [ 0.023402] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 05:07:28.736890 [ 0.023938] pinctrl core: initialized pinctrl subsystem Oct 3 05:07:28.736890 [ 0.024692] DMI not present or invalid. Oct 3 05:07:28.748832 [ 0.025370] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 05:07:28.748832 [ 0.026920] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 05:07:28.760853 [ 0.028436] audit: initializing netlink subsys (disabled) Oct 3 05:07:28.760853 [ 0.028641] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 Oct 3 05:07:28.772897 [ 0.029826] thermal_sys: Registered thermal governor 'fair_share' Oct 3 05:07:28.772897 [ 0.029833] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 05:07:28.784914 [ 0.029838] thermal_sys: Registered thermal governor 'step_wise' Oct 3 05:07:28.784914 [ 0.029843] thermal_sys: Registered thermal governor 'user_space' Oct 3 05:07:28.796896 [ 0.029847] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 05:07:28.796896 [ 0.030048] No ATAGs? Oct 3 05:07:28.808854 [ 0.030117] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 05:07:28.808854 [ 0.030125] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 05:07:28.820894 [ 0.031209] Serial: AMBA PL011 UART driver Oct 3 05:07:28.820894 [ 0.080535] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 05:07:28.832891 [ 0.087477] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 05:07:28.832891 [ 0.091821] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages Oct 3 05:07:28.844877 [ 0.091828] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page Oct 3 05:07:28.856847 [ 0.099707] iommu: Default domain type: Translated Oct 3 05:07:28.856847 [ 0.099715] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 05:07:28.856847 [ 0.100667] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 05:07:28.868777 [ 0.101184] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 05:07:28.868777 [ 0.101196] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 05:07:28.880899 [ 0.101727] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 05:07:28.892849 [ 0.101757] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 05:07:28.892849 [ 0.101984] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 05:07:28.904893 [ 0.102472] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 05:07:28.904893 [ 0.102483] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 05:07:28.917040 [ 0.102863] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 05:07:28.917118 [ 0.103180] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 05:07:28.928842 [ 0.103190] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 05:07:28.928842 [ 0.103502] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 05:07:28.928842 [ 0.103603] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 05:07:28.940821 [ 0.103612] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 05:07:28.940821 [ 0.103792] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 05:07:28.952841 [ 0.104006] pps_core: LinuxPPS API ver. 1 registered Oct 3 05:07:28.952841 [ 0.104012] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 05:07:28.964842 [ 0.104030] PTP clock support registered Oct 3 05:07:28.964842 [ 0.105543] NetLabel: Initializing Oct 3 05:07:28.976818 [ 0.105549] NetLabel: domain hash size = 128 Oct 3 05:07:28.976818 [ 0.105555] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 05:07:28.976818 [ 0.105608] NetLabel: unlabeled traffic allowed by default Oct 3 05:07:28.988822 [ 0.105779] vgaarb: loaded Oct 3 05:07:28.988822 [ 0.106724] clocksource: Switched to clocksource mct-frc Oct 3 05:07:29.000817 [ 0.107340] VFS: Disk quotas dquot_6.6.0 Oct 3 05:07:29.000817 [ 0.107427] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 05:07:29.000817 [ 0.108219] AppArmor: AppArmor Filesystem Enabled Oct 3 05:07:29.012851 [ 0.118135] NET: Registered PF_INET protocol family Oct 3 05:07:29.012851 [ 0.118346] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 05:07:29.024881 [ 0.119843] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 05:07:29.036895 [ 0.119944] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 05:07:29.036895 [ 0.119969] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 05:07:29.048883 [ 0.120069] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 05:07:29.048883 [ 0.120300] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 05:07:29.060840 [ 0.120558] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 05:07:29.072879 [ 0.120650] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 05:07:29.072879 [ 0.120691] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 05:07:29.084897 [ 0.120902] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 05:07:29.084897 [ 0.120937] NET: Registered PF_XDP protocol family Oct 3 05:07:29.096884 [ 0.120948] PCI: CLS 0 bytes, default 64 Oct 3 05:07:29.096884 [ 0.121459] Trying to unpack rootfs image as initramfs... Oct 3 05:07:29.096884 [ 0.121807] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 05:07:29.108930 [ 0.123067] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 05:07:29.120836 [ 0.193400] Initialise system trusted keyrings Oct 3 05:07:29.120836 [ 0.193478] Key type blacklist registered Oct 3 05:07:29.120836 [ 0.194771] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 05:07:29.132886 [ 0.202683] zbud: loaded Oct 3 05:07:29.132886 [ 0.205109] integrity: Platform Keyring initialized Oct 3 05:07:29.145013 [ 0.205145] integrity: Machine keyring initialized Oct 3 05:07:29.145085 [ 0.205153] Key type asymmetric registered Oct 3 05:07:29.145132 [ 0.205160] Asymmetric key parser 'x509' registered Oct 3 05:07:29.156900 [ 1.423396] Freeing initrd memory: 25132K Oct 3 05:07:29.156900 [ 1.445393] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 05:07:29.156900 [ 1.445657] bounce: pool size: 64 pages Oct 3 05:07:29.168849 [ 1.445853] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 05:07:29.168849 [ 1.446015] io scheduler mq-deadline registered Oct 3 05:07:29.180881 [ 1.451184] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 05:07:29.180881 [ 1.472126] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 05:07:29.192856 [ 1.472138] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 05:07:29.204895 [ 1.474435] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 05:07:29.216880 [ 1.474445] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 05:07:29.216880 [ 1.475275] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 05:07:29.228880 [ 1.475284] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 05:07:29.240899 [ 1.476105] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 05:07:29.240899 [ 1.476113] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 05:07:29.252894 [ 1.478428] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 05:07:29.264818 [ 1.481273] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 05:07:29.264818 [ 1.484028] Serial: AMBA driver Oct 3 05:07:29.276879 [ 1.484257] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 05:07:29.276879 [ 1.484749] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 05:07:29.288958 [ 1.485214] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 05:07:29.300897 [ 2.565939] printk: console [ttySAC2] enabled Oct 3 05:07:29.300897 [ 2.570772] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 05:07:29.312832 [ 2.581414] STM32 USART driver initialized Oct 3 05:07:29.312832 [ 2.595840] mousedev: PS/2 mouse device common for all mice Oct 3 05:07:29.336797 [ 2.627106] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 05:07:29.360791 [ 2.635714] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T05:07:29 UTC (1727932049) Oct 3 05:07:29.372843 [ 2.645566] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 05:07:29.384847 [ 2.653030] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 05:07:29.384847 [ 2.661043] NET: Registered PF_INET6 protocol family Oct 3 05:07:29.396840 [ 2.685277] Segment Routing with IPv6 Oct 3 05:07:29.420894 [ 2.687545] In-situ OAM (IOAM) with IPv6 Oct 3 05:07:29.420894 [ 2.691501] mip6: Mobile IPv6 Oct 3 05:07:29.432844 [ 2.694338] NET: Registered PF_PACKET protocol family Oct 3 05:07:29.432844 [ 2.699539] mpls_gso: MPLS GSO support Oct 3 05:07:29.432844 [ 2.703573] ThumbEE CPU extension supported. Oct 3 05:07:29.444869 [ 2.707378] Registering SWP/SWPB emulation handler Oct 3 05:07:29.444869 [ 2.712645] registered taskstats version 1 Oct 3 05:07:29.444869 [ 2.716253] Loading compiled-in X.509 certificates Oct 3 05:07:29.456766 [ 3.176627] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 05:07:29.921843 [ 3.183990] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 05:07:29.921931 [ 3.195085] zswap: loaded using pool lzo/zbud Oct 3 05:07:29.933707 [ 3.198974] Key type .fscrypt registered Oct 3 05:07:29.933740 [ 3.202254] Key type fscrypt-provisioning registered Oct 3 05:07:29.945672 [ 3.226565] Key type encrypted registered Oct 3 05:07:29.957709 [ 3.229161] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 05:07:29.969750 [ 3.234645] ima: No TPM chip found, activating TPM-bypass! Oct 3 05:07:29.969815 [ 3.240093] ima: Allocated hash algorithm: sha256 Oct 3 05:07:29.981751 [ 3.244775] ima: No architecture policies found Oct 3 05:07:29.981811 [ 3.249332] evm: Initialising EVM extended attributes: Oct 3 05:07:29.981860 [ 3.254381] evm: security.selinux Oct 3 05:07:29.993761 [ 3.257681] evm: security.SMACK64 (disabled) Oct 3 05:07:29.993822 [ 3.261925] evm: security.SMACK64EXEC (disabled) Oct 3 05:07:29.993869 [ 3.266528] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 05:07:30.005791 [ 3.271564] evm: security.SMACK64MMAP (disabled) Oct 3 05:07:30.005824 [ 3.276162] evm: security.apparmor Oct 3 05:07:30.017800 [ 3.279546] evm: security.ima Oct 3 05:07:30.017860 [ 3.282481] evm: security.capability Oct 3 05:07:30.017906 [ 3.286062] evm: HMAC attrs: 0x1 Oct 3 05:07:30.017951 [ 3.873698] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 05:07:30.617640 [ 3.879661] clk: Disabling unused clocks Oct 3 05:07:30.617640 [ 3.892544] Freeing unused kernel image (initmem) memory: 2048K Oct 3 05:07:30.629712 [ 3.897411] Checked W+X mappings: passed, no W+X pages found Oct 3 05:07:30.629712 [ 3.902663] Run /init as init process Oct 3 05:07:30.641743 Loading, please wait... Oct 3 05:07:30.665700 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 05:07:30.749706 [ 4.837675] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 05:07:31.577720 [ 4.846190] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 05:07:31.589700 [ 4.862409] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 05:07:31.601736 [ 4.871108] usbcore: registered new interface driver usbfs Oct 3 05:07:31.613757 [ 4.877129] usbcore: registered new interface driver hub Oct 3 05:07:31.613825 [ 4.885697] usbcore: registered new device driver usb Oct 3 05:07:31.625654 [ 4.898377] phy phy-12130000.phy.4: phy_power_on was called before phy_init Oct 3 05:07:31.637756 [ 4.905242] Synopsys Designware Multimedia Card Interface Driver Oct 3 05:07:31.637791 [ 4.925982] phy phy-12130000.phy.4: phy_power_on was called before phy_init Oct 3 05:07:31.661743 [ 4.931576] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 05:07:31.673679 [ 4.937021] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Oct 3 05:07:31.673722 [ 4.957906] exynos-ohci 12120000.usb: USB Host Controller Oct 3 05:07:31.697774 [ 4.961921] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Oct 3 05:07:31.697844 [ 4.984289] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 05:07:31.721702 [ 4.990109] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 05:07:31.733652 [ 5.016736] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 05:07:31.757760 [ 5.021754] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 05:07:31.757822 [ 5.022260] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 05:07:31.769764 [ 5.032346] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Oct 3 05:07:31.769827 [ 5.038362] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 05:07:31.781767 [ 5.044591] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 05:07:31.781830 [ 5.052658] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Oct 3 05:07:31.793738 [ 5.060969] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 05:07:31.793774 [ 5.065873] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 05:07:31.805795 [ 5.073810] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 05:07:31.817695 [ 5.076150] SCSI subsystem initialized Oct 3 05:07:31.817753 [ 5.080986] usb usb1: Product: EHCI Host Controller Oct 3 05:07:31.817802 [ 5.089578] usb usb1: Manufacturer: Linux 6.1.0-25-armmp-lpae ehci_hcd Oct 3 05:07:31.829762 [ 5.096077] usb usb1: SerialNumber: 12110000.usb Oct 3 05:07:31.829822 [ 5.110957] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo Oct 3 05:07:31.853708 [ 5.119835] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 109,32 bit host data width,128 deep fifo Oct 3 05:07:31.865664 [ 5.151863] hub 1-0:1.0: USB hub found Oct 3 05:07:31.889750 [ 5.154420] hub 1-0:1.0: 3 ports detected Oct 3 05:07:31.889813 [ 5.163121] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 05:07:31.901770 [ 5.163673] mmc_host mmc1: card is polling. Oct 3 05:07:31.913748 [ 5.173849] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 05:07:31.913821 [ 5.183599] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 05:07:31.925654 [ 5.190769] usb usb2: Product: USB Host Controller Oct 3 05:07:31.925654 [ 5.195540] usb usb2: Manufacturer: Linux 6.1.0-25-armmp-lpae ohci_hcd Oct 3 05:07:31.937767 [ 5.202051] usb usb2: SerialNumber: 12120000.usb Oct 3 05:07:31.937833 [ 5.221031] hub 2-0:1.0: USB hub found Oct 3 05:07:31.961748 [ 5.226552] hub 2-0:1.0: 3 ports detected Oct 3 05:07:31.961807 [ 5.232702] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 05:07:31.973666 [ 5.295275] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 05:07:32.033775 [ 5.315095] mmc0: new high speed SDHC card at address aaaa Oct 3 05:07:32.057744 [ 5.320541] mmcblk0: mmc0:aaaa SU04G 3.69 GiB Oct 3 05:07:32.057805 [ 5.329253] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 05:07:32.069809 [ 5.335404] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 05:07:32.069846 [ 5.344609] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 05:07:32.081766 [ 5.359114] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 05:07:32.093752 [ 5.364781] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Oct 3 05:07:32.105768 [ 5.373601] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 05:07:32.117758 [ 5.373621] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 05:07:32.129976 [ 5.414421] mmc1: new DDR MMC card at address 0001 Oct 3 05:07:32.153767 [ 5.418412] scsi host0: ahci-dwc Oct 3 05:07:32.153825 [ 5.420392] mmcblk1: mmc1:0001 M4G1FB 3.64 GiB Oct 3 05:07:32.153873 [ 5.423173] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 110 Oct 3 05:07:32.165769 [ 5.436359] mmcblk1: p1 p2 p3 p4 Oct 3 05:07:32.165826 [ 5.443880] mmcblk1boot0: mmc1:0001 M4G1FB 1.00 MiB Oct 3 05:07:32.177731 [ 5.454774] mmcblk1boot1: mmc1:0001 M4G1FB 1.00 MiB Oct 3 05:07:32.189676 [ 5.464759] mmcblk1rpmb: mmc1:0001 M4G1FB 128 KiB, chardev (241:0) Oct 3 05:07:32.201720 [ 5.652954] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 05:07:32.393726 [ 5.727132] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 05:07:32.465779 [ 5.835563] I/O error, dev mmcblk0, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 05:07:32.573816 [ 5.906773] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 05:07:32.645777 [ 5.912397] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 05:07:32.645842 [ 5.918192] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 05:07:32.657684 [ 5.925687] ata1.00: configured for UDMA/133 Oct 3 05:07:32.657717 [ 5.929384] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 05:07:32.669760 [ 5.943535] I/O error, dev mmcblk0, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 05:07:32.681670 [ 5.985355] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 05:07:32.717657 [ 5.989418] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 05:07:32.729681 [ 5.997780] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 05:07:32.741783 [ 6.006454] xhci-hcd xhci-hcd.2.auto: irq 111, io mem 0x12000000 Oct 3 05:07:32.741845 [ 6.012604] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 05:07:32.753678 [ 6.017865] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 05:07:32.753716 [ 6.025497] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 05:07:32.765680 [ 6.032161] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 05:07:32.777682 [ 6.040256] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 05:07:32.777719 [ 6.047466] usb usb3: Product: xHCI Host Controller Oct 3 05:07:32.789769 [ 6.052359] usb usb3: Manufacturer: Linux 6.1.0-25-armmp-lpae xhci-hcd Oct 3 05:07:32.789833 [ 6.058831] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 05:07:32.801778 [ 6.063746] I/O error, dev mmcblk0, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 05:07:32.801852 [ 6.072332] hub 3-0:1.0: USB hub found Oct 3 05:07:32.813777 [ 6.076764] hub 3-0:1.0: 1 port detected Oct 3 05:07:32.813836 [ 6.081899] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 05:07:32.825791 [ 6.089037] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 05:07:32.825861 [ 6.096970] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 05:07:32.837787 [ 6.104156] usb usb4: Product: xHCI Host Controller Oct 3 05:07:32.837848 [ 6.108994] usb usb4: Manufacturer: Linux 6.1.0-25-armmp-lpae xhci-hcd Oct 3 05:07:32.849784 [ 6.115509] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 05:07:32.849845 [ 6.122229] hub 4-0:1.0: USB hub found Oct 3 05:07:32.861737 [ 6.124584] hub 4-0:1.0: 1 port detected Oct 3 05:07:32.861795 [ 6.173663] I/O error, dev mmcblk0, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 05:07:32.909777 [ 6.184506] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 05:07:32.921791 [ 6.190634] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 05:07:32.933766 [ 6.199554] sd 0:0:0:0: [sda] Write Protect is off Oct 3 05:07:32.933828 [ 6.202982] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 05:07:32.945788 [ 6.212033] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 05:07:32.945851 [ 6.234747] sda: sda1 sda2 < sda5 > Oct 3 05:07:32.969737 [ 6.237542] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 05:07:32.969797 [ 6.281639] I/O error, dev mmcblk0, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 05:07:33.017791 [ 6.389607] I/O error, dev mmcblk0, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 05:07:33.125764 [ 6.497565] I/O error, dev mmcblk0, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 05:07:33.233778 [ 6.605613] I/O error, dev mmcblk0, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 05:07:33.341815 [ 7.014093] I/O error, dev mmcblk0, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 05:07:33.749781 [ 7.121696] I/O error, dev mmcblk0, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 05:07:33.857683 [ 7.302746] random: crng init done Oct 3 05:07:34.037831 [ 7.411655] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. Oct 3 05:07:34.157668 [ 7.422519] device-mapper: uevent: version 1.0.3 Oct 3 05:07:34.157668 [ 7.427203] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Oct 3 05:07:34.169622 [ 7.729804] Buffer I/O error on dev mmcblk0, logical block 968056, async page read Oct 3 05:07:34.469613 Begin: Loading essential drivers ... done. Oct 3 05:07:34.937723 Begin: Running /scripts/init-premount ... done. Oct 3 05:07:37.949698 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 05:07:37.949738 Begin: Running /scripts/local-premount ... done. Oct 3 05:07:37.997629 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 05:07:38.033667 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 05:07:38.117701 /dev/mapper/arndale--westfield--vg-root: clean, 39343/1220608 files, 378271/4882432 blocks Oct 3 05:07:38.333635 done. Oct 3 05:07:38.345680 [ 11.725387] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 05:07:38.465652 [ 11.919407] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 05:07:38.657677 done. Oct 3 05:07:38.657705 Begin: Running /scripts/local-bottom ... done. Oct 3 05:07:38.705671 Begin: Running /scripts/init-bottom ... done. Oct 3 05:07:38.753623 [ 12.217273] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. Oct 3 05:07:38.957651 INIT: version 3.06 booting Oct 3 05:07:39.353619 INIT: No inittab.d directory found Oct 3 05:07:39.437631 Using makefile-style concurrent boot in runlevel S. Oct 3 05:07:39.761662 Starting hotplug events dispatcher: systemd-udevd. Oct 3 05:07:41.333646 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 05:07:41.553654 Synthesizing the initial hotplug events (devices)...done. Oct 3 05:07:42.117632 Waiting for /dev to be fully populated...[ 15.590989] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 05:07:42.333626 [ 15.664615] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Oct 3 05:07:42.405705 [ 15.771663] sd 0:0:0:0: Attached scsi generic sg0 type 0 Oct 3 05:07:42.513553 [ 15.835126] panfrost 11800000.gpu: clock rate = 533000000 Oct 3 05:07:42.573630 [ 15.865402] panfrost 11800000.gpu: mali-t600 id 0x600 major 0x0 minor 0x0 status 0x1 Oct 3 05:07:42.609667 [ 15.871707] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,31b4dfff Oct 3 05:07:42.609703 [ 15.879850] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 Oct 3 05:07:42.621685 [ 15.891591] panfrost 11800000.gpu: shader_present=0xf l2_present=0x1 Oct 3 05:07:42.633671 [ 15.898031] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 05:07:42.645637 [ 15.910157] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 0 Oct 3 05:07:42.645671 [ 15.954765] usb3503 usb-hub: switched to HUB mode Oct 3 05:07:42.693674 [ 15.958000] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 05:07:42.693718 [ 15.967586] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 05:07:42.705613 [ 16.076644] blk_print_req_error: 6 callbacks suppressed Oct 3 05:07:42.813699 [ 16.076655] I/O error, dev mmcblk0, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 05:07:42.825691 [ 16.190159] I/O error, dev mmcblk0, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 05:07:42.933675 [ 16.278856] usb 1-3: new high-speed USB device number 2 using exynos-ehci Oct 3 05:07:43.017660 [ 16.298610] I/O error, dev mmcblk0, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 05:07:43.041647 [ 16.406987] I/O error, dev mmcblk0, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 05:07:43.149656 [ 16.435790] OF: graph: no port node found in /soc/hdmi@14530000 Oct 3 05:07:43.173661 [ 16.447352] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Oct 3 05:07:43.185709 [ 16.454191] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 3 05:07:43.197715 [ 16.469202] hub 1-3:1.0: USB hub found Oct 3 05:07:43.209648 [ 16.478355] hub 1-3:1.0: 3 ports detected Oct 3 05:07:43.209680 [ 16.515145] I/O error, dev mmcblk0, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 05:07:43.257652 [ 16.623388] I/O error, dev mmcblk0, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 05:07:43.365659 [ 16.731660] I/O error, dev mmcblk0, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 05:07:43.473612 [ 16.783408] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 05:07:43.521664 [ 16.840198] I/O error, dev mmcblk0, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 05:07:43.581653 [ 16.900892] usb 1-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=77.32 Oct 3 05:07:43.641713 [ 16.907943] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Oct 3 05:07:43.653668 [ 16.915376] usb 1-3.2: Product: USB2.0 Hub Oct 3 05:07:43.653701 [ 16.924522] hub 1-3.2:1.0: USB hub found Oct 3 05:07:43.665641 [ 16.930931] hub 1-3.2:1.0: 4 ports detected Oct 3 05:07:43.665675 [ 17.222919] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 05:07:43.965716 [ 17.249584] I/O error, dev mmcblk0, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 05:07:43.989763 [ 17.336934] usb 1-3.2.4: New USB device found, idVendor=0b95, idProduct=772a, bcdDevice= 0.01 Oct 3 05:07:44.076883 [ 17.344148] usb 1-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Oct 3 05:07:44.088838 [ 17.351612] usb 1-3.2.4: Product: AX88772 Oct 3 05:07:44.088838 [ 17.355895] usb 1-3.2.4: Manufacturer: ASIX Elec. Corp. Oct 3 05:07:44.088838 [ 17.360951] usb 1-3.2.4: SerialNumber: 000001 Oct 3 05:07:44.100867 [ 17.365521] I/O error, dev mmcblk0, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 05:07:44.100867 [ 17.933202] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 05:07:44.676777 [ 17.975666] Buffer I/O error on dev mmcblk0, logical block 968056, async page read Oct 3 05:07:44.712846 [ 18.629393] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 05:07:45.372864 [ 18.644943] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Oct 3 05:07:45.384835 [ 18.656838] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, fe:a8:85:89:ef:23 Oct 3 05:07:45.396991 [ 18.673493] usbcore: registered new interface driver asix Oct 3 05:07:45.408953 done. Oct 3 05:07:45.636929 [ 19.445899] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 05:07:46.176821 Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). Oct 3 05:07:46.236762 Checking file systems.../dev/sda1: clean, 922/61056 files, 25402/243968 blocks Oct 3 05:07:47.845734 done. Oct 3 05:07:47.869617 Cleaning up temporary files... /tmp. Oct 3 05:07:48.097828 [ 21.581334] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 05:07:48.313775 [ 21.630103] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 05:07:48.361647 [ 21.837175] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k FS Oct 3 05:07:48.577779 Mounting local filesystems...done. Oct 3 05:07:49.009205 Activating swapfile swap, if any...done. Oct 3 05:07:49.009384 Cleaning up temporary files.... Oct 3 05:07:49.025709 Starting Setting kernel variables: sysctl. Oct 3 05:07:49.241621 [ 23.138517] audit: type=1400 audit(1727932069.944:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=896 comm="apparmor_parser" Oct 3 05:07:49.877832 [ 23.157783] audit: type=1400 audit(1727932069.964:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=896 comm="apparmor_parser" Oct 3 05:07:49.901775 [ 23.172230] audit: type=1400 audit(1727932069.964:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=895 comm="apparmor_parser" Oct 3 05:07:49.913766 [ 23.399042] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 05:07:50.129766 [ 23.534848] audit: type=1400 audit(1727932070.344:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=933 comm="apparmor_parser" Oct 3 05:07:50.273765 [ 23.554116] audit: type=1400 audit(1727932070.356:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=933 comm="apparmor_parser" Oct 3 05:07:50.297765 [ 23.567560] audit: type=1400 audit(1727932070.360:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=933 comm="apparmor_parser" Oct 3 05:07:50.309763 [ 23.891734] audit: type=1400 audit(1727932070.700:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=932 comm="apparmor_parser" Oct 3 05:07:50.633742 [ 23.914769] audit: type=1400 audit(1727932070.704:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=932 comm="apparmor_parser" Oct 3 05:07:50.657768 [ 23.930647] audit: type=1400 audit(1727932070.704:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=932 comm="apparmor_parser" Oct 3 05:07:50.681712 [ 23.948189] audit: type=1400 audit(1727932070.712:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=932 comm="apparmor_parser" Oct 3 05:07:50.693635 Starting: AppArmorLoading AppArmor profiles...done. Oct 3 05:07:50.753728 . Oct 3 05:07:50.753780 [ 25.544719] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 05:07:52.281791 [ 25.550873] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 3 05:07:52.281870 Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1 Oct 3 05:07:53.745808 Copyright 2004-2022 Internet Systems Consortium. Oct 3 05:07:53.745881 All rights reserved. Oct 3 05:07:53.757747 For info, please visit https://www.isc.org/software/dhcp/ Oct 3 05:07:53.757810 Oct 3 05:07:53.757849 Listening on LPF/eth0/a6:46:13:77:e8:2f Oct 3 05:07:53.757895 Sending on LPF/eth0/a6:46:13:77:e8:2f Oct 3 05:07:53.769768 Sending on Socket/fallback Oct 3 05:07:53.769827 Created duid "\000\001\000\001.\220\343&\246F\023w\350/". Oct 3 05:07:53.769876 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 Oct 3 05:07:53.781777 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 Oct 3 05:07:53.781840 DHCPOFFER of 10.149.64.45 from 10.149.64.4 Oct 3 05:07:53.781887 DHCPREQUEST for 10.149.64.45 on eth0 to 255.255.255.255 port 67 Oct 3 05:07:53.793793 DHCPACK of 10.149.64.45 from 10.149.64.4 Oct 3 05:07:53.793852 bound to 10.149.64.45 -- renewal in 228 seconds. Oct 3 05:07:53.805614 done. Oct 3 05:07:53.805640 Cleaning up temporary files.... Oct 3 05:07:53.805664 Starting nftables: none Oct 3 05:07:53.865709 . Oct 3 05:07:54.297679 INIT: Entering runlevel: 2 Oct 3 05:07:54.345701 Using makefile-style concurrent boot in runlevel 2. Oct 3 05:07:54.393725 Starting Apache httpd web server: apache2[ 28.898057] exynos4-fb 14400000.fimd: deferred probe timeout, ignoring dependency Oct 3 05:07:55.629654 [ 28.910055] exynos-mixer 14450000.mixer: deferred probe timeout, ignoring dependency Oct 3 05:07:55.641650 [ 28.917954] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations Oct 3 05:07:55.653770 [ 28.924349] exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm]) Oct 3 05:07:55.665745 [ 28.932861] exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm]) Oct 3 05:07:55.665814 [ 28.942266] exynos-drm exynos-drm: bound 14500000.dsi (ops hdmi_enable [exynosdrm]) Oct 3 05:07:55.677776 [ 28.948701] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm]) Oct 3 05:07:55.689706 [ 28.967094] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 05:07:55.701757 [ 28.975134] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 05:07:55.713707 [ 28.981144] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 Oct 3 05:07:55.713773 . Oct 3 05:07:56.421732 Starting periodic command scheduler: cron. Oct 3 05:07:56.781740 Starting NTP server: ntpd2024-10-03T05:07:56 ntpd[1134]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 05:07:56.793739 2024-10-03T05:07:56 ntpd[1134]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 05:07:56.805740 . Oct 3 05:07:56.805790 Starting system message bus: dbus. Oct 3 05:07:57.081696 Starting OpenBSD Secure Shell server: sshd. Oct 3 05:07:57.789811 Oct 3 05:07:58.905792 Debian GNU/Linux 12 arndale-westfield ttySAC2 Oct 3 05:07:58.905863 Oct 3 05:07:58.905901 arndale-westfield login: INIT: Switching to r INIT: No inittab.d directorUsing makefile-style concurrent boot in runlevel 6. Oct 3 05:13:27.009744 Stopping libvirt management daemon: libvirtdNo /usr/local/sbin/libvirtd found running; none killed. Oct 3 05:13:27.057709 . Oct 3 05:13:27.057760 Stopping SMP IRQ Balancer: irqbalance. Oct 3 05:13:27.057807 Stopping hotplug events dispatcher: systemd-udevd. Oct 3 05:13:27.093736 Stopping nftables: none. Oct 3 05:13:27.105687 Saving the system clock to /dev/rtc0. Oct 3 05:13:28.173799 Hardware Clock updated to Thu Oct 3 05:13:28 UTC 2024. Oct 3 05:13:28.173883 Stopping Apache httpd web server: apache2. Oct 3 05:13:28.245706 Asking all remaining processes to terminate...done. Oct 3 05:13:28.521750 All processes ended within 1 seconds...done. Oct 3 05:13:28.521810 Deconfiguring network interfaces...ifdown: ignoring unknown interface eth0=eth0 Oct 3 05:13:28.713730 done. Oct 3 05:13:28.713783 [ 362.224805] EXT4-fs (sda1): unmounting filesystem. Oct 3 05:13:28.953713 Deactivating swap...done. Oct 3 05:13:29.025596 Unmounting local filesystems...done. Oct 3 05:13:29.025629 [ 362.528897] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 05:13:29.265589 Will now restart. Oct 3 05:13:29.505803 [ 362.803457] asix 1-3.2.4:1.0 eth0: Link is Down Oct 3 05:13:29.541678 [ 362.871738] sd 0:0:0:0: [sda] Synchronizing SCSI cache Oct 3 05:13:29.601718 [ 362.879491] wake enabled for irq 101 (gpx1-4) Oct 3 05:13:29.613748 [ 362.882375] wake enabled for irq 102 (gpx1-5) Oct 3 05:13:29.613809 [ 362.886740] wake enabled for irq 103 (gpx1-6) Oct 3 05:13:29.625750 [ 362.891071] wake enabled for irq 104 (gpx1-7) Oct 3 05:13:29.625812 [ 362.895411] wake enabled for irq 105 (gpx2-0) Oct 3 05:13:29.625859 [ 362.899750] wake enabled for irq 106 (gpx2-1) Oct 3 05:13:29.637680 [ 362.904575] reboot: Reű Oct 3 05:13:29.973803 Oct 3 05:13:29.973857 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 05:13:29.973938 Oct 3 05:13:29.973979 CPU: Exynos5250@1000MHz Oct 3 05:13:29.974022 Oct 3 05:13:29.974059 Board: Arndale Oct 3 05:13:29.974100 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 05:13:29.985724 ready Oct 3 05:13:29.985776 DRAM: 2 GiB Oct 3 05:13:29.985818 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 05:13:30.009654 trace: enabled Oct 3 05:13:30.045672 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 05:13:30.405663 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 05:13:30.453717 In: serial Oct 3 05:13:30.453771 Out: serial Oct 3 05:13:30.465710 Err: serial Oct 3 05:13:30.465764 SCSI: ARNDALE SCSI INIT Oct 3 05:13:30.465807 Target spinup took 0 ms. Oct 3 05:13:30.465849 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 05:13:30.477805 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 05:13:30.477868 Net: Net Initialization Skipped Oct 3 05:13:30.477913 No ethernet found. Oct 3 05:13:30.489707 Hostname: arndale-westfield Oct 3 05:13:30.489763 Hit any key to stop autoboot: 2  1  0 Oct 3 05:13:32.409713 (Re)start USB... Oct 3 05:13:32.409783 USB0: USB EHCI 1.00 Oct 3 05:13:32.421739 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 05:13:38.008851 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 05:13:38.020877 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 05:13:38.464839 Waiting for Ethernet connection... done. Oct 3 05:13:40.064957 BOOTP broadcast 1 Oct 3 05:13:40.064985 EHCI timed out on TD - token=0x8008d80 Oct 3 05:13:44.868862 BOOTP broadcast 2 Oct 3 05:13:44.868862 DHCP client bound to address 10.149.64.45 (5009 ms) Oct 3 05:13:44.880902 Using asx0 device Oct 3 05:13:44.880902 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 05:13:44.880902 Filename 'pxelinux.0'. Oct 3 05:13:44.880902 Load address: 0x43e00000 Oct 3 05:13:44.892813 Loading: *### Oct 3 05:13:44.904864 2.2 MiB/s Oct 3 05:13:44.904864 done Oct 3 05:13:44.904864 Bytes transferred = 42430 (a5be hex) Oct 3 05:13:44.904864 missing environment variable: pxeuuid Oct 3 05:13:44.916884 Retrieving file: pxelinux.cfg/0A95402D Oct 3 05:13:44.916884 Using asx0 device Oct 3 05:13:44.916884 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 05:13:44.916884 Filename 'pxelinux.cfg/0A95402D'. Oct 3 05:13:44.928897 Load address: 0x51000000 Oct 3 05:13:44.928897 Loading: *# Oct 3 05:13:44.928897 31.3 KiB/s Oct 3 05:13:44.928897 done Oct 3 05:13:44.928897 Bytes transferred = 65 (41 hex) Oct 3 05:13:44.928897 Config file found Oct 3 05:13:44.940865 Ignoring unknown command: serial Oct 3 05:13:44.940865 1: local Oct 3 05:13:44.940865 scanning bus for devices... Oct 3 05:13:44.940865 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 05:13:44.964966 Type: Hard Disk Oct 3 05:13:44.976899 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 05:13:44.976899 Found 1 device(s). Oct 3 05:13:44.976899 Oct 3 05:13:44.976899 SCSI device 0: Oct 3 05:13:44.976899 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 05:13:44.988903 Type: Hard Disk Oct 3 05:13:44.988903 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 05:13:44.988903 ... is now current device Oct 3 05:13:45.000846 Scanning scsi 0... Oct 3 05:13:45.000846 Found U-Boot script /boot.scr Oct 3 05:13:45.180924 1742 bytes read in 40 ms (42 KiB/s) Oct 3 05:13:45.216830 ## Executing script at 50000000 Oct 3 05:13:45.227923 Loading dtbs/6.1.112+/exynos5250-arndale.dtb Oct 3 05:13:45.227923 46686 bytes read in 2412 ms (18.6 KiB/s) Oct 3 05:13:47.569018 1015824 bytes read in 129 ms (7.5 MiB/s) Oct 3 05:13:47.712870 Loaded xen-4.20-unstable to 0x41000000 (f8010) Oct 3 05:13:47.712870 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan Oct 3 05:13:47.724953 10039808 bytes read in 390 ms (24.6 MiB/s) Oct 3 05:13:48.112824 Loaded vmlinuz-6.1.112+ to 0x42000000 (993200) Oct 3 05:13:48.124809 command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 05:13:48.136935 12059091 bytes read in 635 ms (18.1 MiB/s) Oct 3 05:13:48.772998 Loaded initrd.img-6.1.112+ to 0x43300000 (b801d3) Oct 3 05:13:48.784901 chosen { Oct 3 05:13:48.784901 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan"; Oct 3 05:13:48.796891 #size-cells = <0x00000001>; Oct 3 05:13:48.796891 #address-cells = <0x00000001>; Oct 3 05:13:48.796891 stdout-path = "serial2:115200n8"; Oct 3 05:13:48.808854 module@1 { Oct 3 05:13:48.808854 reg = <0x43300000 0x00b801d3>; Oct 3 05:13:48.808854 compatible = "xen,linux-initrd", "xen,multiboot-module"; Oct 3 05:13:48.808854 }; Oct 3 05:13:48.808854 module@0 { Oct 3 05:13:48.808854 bootargs = "ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Oct 3 05:13:48.832879 reg = <0x42000000 0x00993200>; Oct 3 05:13:48.832879 compatible = "xen,linux-zimage", "xen,multiboot-module"; Oct 3 05:13:48.832879 }; Oct 3 05:13:48.844902 }; Oct 3 05:13:48.844902 Booting 0x41000000 - 0x43000000 Oct 3 05:13:48.844902 Kernel image @ 0x41000000 [ 0x000000 - 0x135000 ] Oct 3 05:13:48.844902 ## Flattened Device Tree blob at 43000000 Oct 3 05:13:48.844902 Booting using the fdt blob at 0x43000000 Oct 3 05:13:48.856903 reserving fdt memory region: addr=43000000 size=c000 Oct 3 05:13:48.856903 Loading Device Tree to 4fff1000, end 4fffffff ... OK Oct 3 05:13:48.868859 Oct 3 05:13:48.868859 Starting kernel ...(fake run for tracing) Oct 3 05:13:48.868859 Oct 3 05:13:48.868859 Oct 3 05:13:48.880835 Starting kernel ... Oct 3 05:13:48.880835 Oct 3 05:13:48.880835 __ __ _ _ ____ ___ _ _ _ Oct 3 05:13:48.928885 \ \/ /___ _ __ | || | |___ \ / _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Oct 3 05:13:48.928885 \ // _ \ '_ \ | || |_ __) | | | |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Oct 3 05:13:48.940896 / \ __/ | | | |__ _| / __/| |_| |__| |_| | | | \__ \ || (_| | |_) | | __/ Oct 3 05:13:48.952865 /_/\_\___|_| |_| |_|(_)_____|\___/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Oct 3 05:13:48.952865 Oct 3 05:13:48.952865 (XEN) Xen version 4.20-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Thu Oct 3 01:24:04 UTC 2024 Oct 3 05:13:48.964860 (XEN) Latest ChangeSet: Tue Oct 1 13:00:13 2024 +0100 git:633ee8b2df-dirty Oct 3 05:13:48.975394 (XEN) build-id: acdae48e9eb1245e5b7f31d344adf979e897cb42 Oct 3 05:13:48.975394 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Oct 3 05:13:48.985756 (XEN) 32-bit Execution: Oct 3 05:13:48.985812 (XEN) Processor Features: 00001031:00011011 Oct 3 05:13:48.985858 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Oct 3 05:13:48.997763 (XEN) Extensions: GenericTimer Security Oct 3 05:13:48.997821 (XEN) Debug Features: 02010555 Oct 3 05:13:48.997866 (XEN) Auxiliary Features: 00000000 Oct 3 05:13:49.009750 (XEN) Memory Model Features: 10201105 20000000 Oct 3 05:13:49.009811 (XEN) 01240000 02102211 Oct 3 05:13:49.009857 (XEN) ISA Features: 02101110 13112111 21232041 Oct 3 05:13:49.021745 (XEN) 11112131 10011142 00000000 Oct 3 05:13:49.021821 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Oct 3 05:13:49.033769 (XEN) Set SYSRAM to 0000000041000070 (00200070) Oct 3 05:13:49.033828 (XEN) SMP: Allowing 2 CPUs Oct 3 05:13:49.033909 (XEN) enabled workaround for: ARM erratum 766422 Oct 3 05:13:49.045756 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Oct 3 05:13:49.045820 (XEN) GICv2 initialization: Oct 3 05:13:49.057754 (XEN) gic_dist_addr=0000000010481000 Oct 3 05:13:49.057814 (XEN) gic_cpu_addr=0000000010482000 Oct 3 05:13:49.057860 (XEN) gic_hyp_addr=0000000010484000 Oct 3 05:13:49.057904 (XEN) gic_vcpu_addr=0000000010486000 Oct 3 05:13:49.069768 (XEN) gic_maintenance_irq=25 Oct 3 05:13:49.069825 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Oct 3 05:13:49.081753 (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2) Oct 3 05:13:49.081824 (XEN) Initializing Credit2 scheduler Oct 3 05:13:49.081870 (XEN) load_precision_shift: 18 Oct 3 05:13:49.081913 (XEN) load_window_shift: 30 Oct 3 05:13:49.093753 (XEN) underload_balance_tolerance: 0 Oct 3 05:13:49.093811 (XEN) overload_balance_tolerance: -3 Oct 3 05:13:49.093856 (XEN) runqueues arrangement: socket Oct 3 05:13:49.105752 (XEN) cap enforcement granularity: 10ms Oct 3 05:13:49.105812 (XEN) load tracking window length 1073741824 ns Oct 3 05:13:49.105859 (XEN) Allocated console ring of 16 KiB. Oct 3 05:13:49.105903 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Oct 3 05:13:49.117768 (XEN) CPU0: Guest atomics will try 1 times before pausing the domain Oct 3 05:13:49.117831 (XEN) Bringing up CPU1 Oct 3 05:13:49.129773 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Oct 3 05:13:49.129837 (XEN) Brought up 2 CPUs Oct 3 05:13:49.129880 (XEN) CPU 1 booted. Oct 3 05:13:49.141750 (XEN) I/O virtualisation disabled Oct 3 05:13:49.141815 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Oct 3 05:13:49.141865 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Oct 3 05:13:49.153655 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Oct 3 05:13:49.153717 (XEN) Initializing Credit2 scheduler Oct 3 05:13:49.153762 (XEN) load_precision_shift: 18 Oct 3 05:13:49.165749 (XEN) load_window_shift: 30 Oct 3 05:13:49.165806 (XEN) underload_balance_tolerance: 0 Oct 3 05:13:49.165852 (XEN) overload_balance_tolerance: -3 Oct 3 05:13:49.165896 (XEN) runqueues arrangement: socket Oct 3 05:13:49.177763 (XEN) cap enforcement granularity: 10ms Oct 3 05:13:49.177822 (XEN) load tracking window length 1073741824 ns Oct 3 05:13:49.177869 (XEN) Adding cpu 0 to runqueue 0 Oct 3 05:13:49.177913 (XEN) First cpu on runqueue, activating Oct 3 05:13:49.189769 (XEN) Adding cpu 1 to runqueue 0 Oct 3 05:13:49.189835 (XEN) alternatives: Patching with alt table 002c31f0 -> 002c32c8 Oct 3 05:13:49.201762 (XEN) CPU0 will execute ICIALLU on guest exit Oct 3 05:13:49.201830 (XEN) CPU1 will execute ICIALLU on guest exit Oct 3 05:13:49.201878 (XEN) *** LOADING DOMAIN 0 *** Oct 3 05:13:49.201921 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Oct 3 05:13:49.213764 (XEN) Loading ramdisk from boot module @ 0000000043300000 Oct 3 05:13:49.213825 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Oct 3 05:13:49.225702 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Oct 3 05:13:49.781761 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Oct 3 05:13:49.793691 (XEN) Allocating PPI 16 for event channel interrupt Oct 3 05:13:49.817696 (XEN) d0: extended regions not supported for 32-bit guests Oct 3 05:13:49.829709 (XEN) Loading zImage from 0000000042000000 to 0000000067600000-0000000067f93200 Oct 3 05:13:49.829776 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d801d3 Oct 3 05:13:49.925754 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b4c2 Oct 3 05:13:50.021754 (XEN) Initial low memory virq threshold set at 0x4000 pages. Oct 3 05:13:50.033774 (XEN) Scrubbing Free RAM in background Oct 3 05:13:50.033833 (XEN) Std. Loglevel: All Oct 3 05:13:50.033876 (XEN) Guest Loglevel: All Oct 3 05:13:50.033918 (XEN) *************************************************** Oct 3 05:13:50.045798 (XEN) WARNING: SILO mode is not enabled. Oct 3 05:13:50.045860 (XEN) It has implications on the security of the system, Oct 3 05:13:50.057753 (XEN) unless the communications have been forbidden between Oct 3 05:13:50.057815 (XEN) untrusted domains. Oct 3 05:13:50.057858 (XEN) *************************************************** Oct 3 05:13:50.069702 (XEN) 3... 2... 1... Oct 3 05:13:53.061614 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 05:13:53.073637 (XEN) Freed 384kB init memory. Oct 3 05:13:53.073689 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 05:13:54.137742 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Oct 3 05:13:54.153733 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Oct 3 05:13:54.169741 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Oct 3 05:13:54.169799 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Oct 3 05:13:54.169847 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 05:13:54.185654 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 05:13:54.217675 [ 0.000000] Linux version 6.1.112+ (osstest@himrod1) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Wed Oct 2 22:15:19 UTC 2024 Oct 3 05:13:54.233773 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 05:13:54.249810 [ 0.000000] CPU: div instructions available: patching division code Oct 3 05:13:54.249874 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 05:13:54.261745 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 05:13:54.261813 [ 0.000000] Memory policy: Data cache writealloc Oct 3 05:13:54.273740 [ 0.000000] Xen 4.20 support found Oct 3 05:13:54.273795 [ 0.000000] efi: UEFI not found. Oct 3 05:13:54.273864 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 Oct 3 05:13:54.285778 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 05:13:54.285837 [ 0.000000] Zone ranges: Oct 3 05:13:54.285881 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Oct 3 05:13:54.297753 [ 0.000000] Normal empty Oct 3 05:13:54.297811 [ 0.000000] HighMem empty Oct 3 05:13:54.297854 [ 0.000000] Movable zone start for each node Oct 3 05:13:54.309771 [ 0.000000] Early memory node ranges Oct 3 05:13:54.309829 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Oct 3 05:13:54.309879 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Oct 3 05:13:54.321784 [ 0.000000] psci: probing for conduit method from DT. Oct 3 05:13:54.321845 [ 0.000000] psci: PSCIv1.1 detected in firmware. Oct 3 05:13:54.333776 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Oct 3 05:13:54.333838 [ 0.000000] psci: Trusted OS migration not required Oct 3 05:13:54.345780 [ 0.000000] psci: SMC Calling Convention v1.2 Oct 3 05:13:54.345840 [ 0.000000] percpu: Embedded 16 pages/cpu s35412 r8192 d21932 u65536 Oct 3 05:13:54.357757 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 Oct 3 05:13:54.357823 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 05:13:54.381801 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 05:13:54.381871 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Oct 3 05:13:54.393740 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Oct 3 05:13:54.393801 [ 0.000000] Memory: 416844K/524288K available (14336K kernel code, 2180K rwdata, 5604K rodata, 2048K init, 438K bss, 41908K reserved, 65536K cma-reserved, 0K highmem) Oct 3 05:13:54.409751 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 05:13:54.425688 [ 0.000000] trace event string verifier disabled Oct 3 05:13:54.425746 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 05:13:54.425791 [ 0.000000] rcu: RCU event tracing is enabled. Oct 3 05:13:54.441789 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Oct 3 05:13:54.441852 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Oct 3 05:13:54.453791 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 05:13:54.453855 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 05:13:54.469704 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 05:13:54.469769 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 05:13:54.469821 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Oct 3 05:13:54.485801 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 05:13:54.485876 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 05:13:54.497792 [ 0.000013] Switching to timer-based delay loop, resolution 41ns Oct 3 05:13:54.509766 [ 0.000499] Console: colour dummy device 80x30 Oct 3 05:13:54.509826 [ 0.293139] printk: console [hvc0] enabled Oct 3 05:13:54.509873 [ 0.297330] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Oct 3 05:13:54.521800 [ 0.307730] CPU: Testing write buffer coherency: ok Oct 3 05:13:54.537697 [ 0.312673] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 05:13:54.537738 [ 0.322227] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 05:13:54.553791 [ 0.328640] pid_max: default: 32768 minimum: 301 Oct 3 05:13:54.553855 [ 0.333432] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 05:13:54.553911 [ 0.340707] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 05:13:54.569761 [ 0.349122] /cpus/cpu@0 missing clock-frequency property Oct 3 05:13:54.569804 [ 0.353910] /cpus/cpu@1 missing clock-frequency property Oct 3 05:13:54.581693 [ 0.359305] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 05:13:54.581736 [ 0.365818] xen:grant_table: Grant tables using version 1 layout Oct 3 05:13:54.597695 [ 0.371156] Grant table initialized Oct 3 05:13:54.597729 [ 0.374693] xen:events: Using FIFO-based ABI Oct 3 05:13:54.597755 [ 0.379012] Xen: initializing cpu0 Oct 3 05:13:54.597779 [ 0.382542] Setting up static identity map for 0x60300000 - 0x603000ac Oct 3 05:13:54.609772 [ 0.390298] rcu: Hierarchical SRCU implementation. Oct 3 05:13:54.609834 [ 0.393928] rcu: Max phase no-delay instances is 1000. Oct 3 05:13:54.625667 [ 0.402001] EFI services will not be available. Oct 3 05:13:54.625701 [ 0.405299] smp: Bringing up secondary CPUs ... Oct 3 05:13:54.625730 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 05:13:54.705644 [ 0.479412] Xen: initializing cpu1 Oct 3 05:13:54.705688 [ 0.479567] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 05:13:54.705716 [ 0.479596] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 05:13:54.721637 [ 0.498468] smp: Brought up 1 node, 2 CPUs Oct 3 05:13:54.721669 [ 0.502241] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 05:13:54.721697 [ 0.508550] CPU: All CPU(s) started in SVC mode. Oct 3 05:13:54.733542 [ 0.513955] devtmpfs: initialized Oct 3 05:13:54.733567 [ 0.526597] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 05:13:54.745594 [ 0.533086] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Oct 3 05:13:54.757668 [ 0.542809] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 05:13:54.769575 [ 0.550867] pinctrl core: initialized pinctrl subsystem Oct 3 05:13:54.769609 [ 0.557363] DMI not present or invalid. Oct 3 05:13:54.781585 [ 0.560458] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 05:13:54.781621 [ 0.567637] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 05:13:54.793611 [ 0.576424] thermal_sys: Registered thermal governor 'step_wise' Oct 3 05:13:54.793650 [ 0.576553] software IO TLB: area num 2. Oct 3 05:13:54.805589 [ 0.585236] software IO TLB: only able to allocate 8 MB Oct 3 05:13:54.805627 [ 0.592360] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Oct 3 05:13:54.817600 [ 0.597546] No ATAGs? Oct 3 05:13:54.817635 [ 0.599895] hw-breakpoint: Failed to enable monitor mode on CPU 0. Oct 3 05:13:54.817663 [ 0.608421] Serial: AMBA PL011 UART driver Oct 3 05:13:54.829587 [ 0.640600] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 62 Oct 3 05:13:54.865599 [ 0.689976] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 05:13:54.913700 [ 0.715539] xen:balloon: Initialising balloon driver Oct 3 05:13:54.937673 [ 0.723077] iommu: Default domain type: Translated Oct 3 05:13:54.949693 [ 0.726576] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 05:13:54.949755 [ 0.733528] SCSI subsystem initialized Oct 3 05:13:54.949802 [ 0.737085] usbcore: registered new interface driver usbfs Oct 3 05:13:54.961694 [ 0.742322] usbcore: registered new interface driver hub Oct 3 05:13:54.961756 [ 0.747713] usbcore: registered new device driver usb Oct 3 05:13:54.973635 [ 0.754344] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 05:13:54.973672 [ 0.757981] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 05:13:54.985678 [ 0.764255] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 05:13:54.985751 [ 0.772701] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 05:13:54.997749 [ 0.781841] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 05:13:55.009729 [ 0.787355] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 05:13:55.009791 [ 0.792044] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 05:13:55.009841 [ 0.798322] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 05:13:55.021757 [ 0.803523] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 05:13:55.021822 [ 0.808314] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 05:13:55.033729 [ 0.814417] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 05:13:55.033792 [ 0.819590] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 05:13:55.045735 [ 0.824505] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 05:13:55.045801 [ 0.830540] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 05:13:55.057675 [ 0.836310] pps_core: LinuxPPS API ver. 1 registered Oct 3 05:13:55.057738 [ 0.840748] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 05:13:55.069723 [ 0.849949] PTP clock support registered Oct 3 05:13:55.069782 [ 0.862079] EDAC MC: Ver: 3.0.0 Oct 3 05:13:55.081642 [ 0.871996] vgaarb: loaded Oct 3 05:13:55.093659 [ 0.877627] clocksource: Switched to clocksource arch_sys_counter Oct 3 05:13:55.093723 [ 0.889109] NET: Registered PF_INET protocol family Oct 3 05:13:55.105645 [ 0.892753] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Oct 3 05:13:55.117675 [ 0.900658] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 05:13:55.129818 [ 0.908370] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 05:13:55.129886 [ 0.916143] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Oct 3 05:13:55.141735 [ 0.923995] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Oct 3 05:13:55.153767 [ 0.931280] TCP: Hash tables configured (established 4096 bind 4096) Oct 3 05:13:55.153832 [ 0.937641] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 05:13:55.165715 [ 0.944189] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 05:13:55.165781 [ 0.951330] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 05:13:55.177626 [ 0.967838] RPC: Registered named UNIX socket transport module. Oct 3 05:13:55.189709 [ 0.972385] RPC: Registered udp transport module. Oct 3 05:13:55.189770 [ 0.977158] RPC: Registered tcp transport module. Oct 3 05:13:55.201698 [ 0.981946] RPC: Registered tcp NFSv4.1 backchannel transport module. Oct 3 05:13:55.201763 [ 0.988475] PCI: CLS 0 bytes, default 64 Oct 3 05:13:55.213726 [ 0.993752] Initialise system trusted keyrings Oct 3 05:13:55.213787 [ 0.997118] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Oct 3 05:13:55.225746 [ 0.999294] Trying to unpack rootfs image as initramfs... Oct 3 05:13:55.225808 [ 1.011393] squashfs: version 4.0 (2009/01/31) Phillip Lougher Oct 3 05:13:55.237725 [ 1.043069] NFS: Registering the id_resolver key type Oct 3 05:13:55.261755 [ 1.046811] Key type id_resolver registered Oct 3 05:13:55.273763 [ 1.051059] Key type id_legacy registered Oct 3 05:13:55.273818 [ 1.055200] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Oct 3 05:13:55.273870 [ 1.061901] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Oct 3 05:13:55.285764 [ 1.085439] Key type asymmetric registered Oct 3 05:13:55.309806 [ 1.088224] Asymmetric key parser 'x509' registered Oct 3 05:13:55.309869 [ 1.093257] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 05:13:55.321783 [ 1.100609] io scheduler mq-deadline registered Oct 3 05:13:55.321843 [ 1.105185] io scheduler kyber registered Oct 3 05:13:55.321889 [ 1.121390] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 05:13:55.347097 [ 1.173368] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 05:13:55.393803 [ 1.179639] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 05:13:55.405781 [ 1.194520] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 05:13:55.420013 [ 1.200753] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 05:13:55.429714 [ 1.214702] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 05:13:55.441729 [ 1.220947] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 05:13:55.441802 [ 1.235339] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 05:13:55.453774 [ 1.241568] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 05:13:55.467734 [ 1.257675] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 05:13:55.477737 [ 1.268311] xen:xen_evtchn: Event-channel device installed Oct 3 05:13:55.489627 [ 1.319480] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 05:13:55.537957 [ 1.328791] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 113, base_baud = 0) is a S3C6400/10 Oct 3 05:13:55.549870 [ 1.336870] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 114, base_baud = 0) is a S3C6400/10 Oct 3 05:13:55.561869 [ 1.346000] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 115, base_baud = 0) is a S3C6400/10 Oct 3 05:13:55.573880 [ 1.355319] SuperH (H)SCI(F) driver initialized Oct 3 05:13:55.573940 [ 1.360115] STMicroelectronics ASC driver initialized Oct 3 05:13:55.585851 [ 1.365393] STM32 USART driver initialized Oct 3 05:13:55.585912 [ 1.379477] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 05:13:55.597844 [ 1.400629] brd: module loaded Oct 3 05:13:55.621801 [ 1.428054] loop: module loaded Oct 3 05:13:55.645779 [ 1.633053] Freeing initrd memory: 11780K Oct 3 05:13:55.849727 [ 1.639319] Invalid max_queues (4), will use default max: 2. Oct 3 05:13:55.861723 [ 1.665443] tun: Universal TUN/TAP device driver, 1.6 Oct 3 05:13:55.885750 [ 1.669351] CAN device driver interface Oct 3 05:13:55.885808 [ 1.674396] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Oct 3 05:13:55.897732 [ 1.684838] xen_netfront: Initialising Xen virtual ethernet driver Oct 3 05:13:55.909769 [ 1.689729] pegasus: Pegasus/Pegasus II USB Ethernet driver Oct 3 05:13:55.909831 [ 1.695307] usbcore: registered new interface driver pegasus Oct 3 05:13:55.921757 [ 1.701061] usbcore: registered new interface driver asix Oct 3 05:13:55.921818 [ 1.706502] usbcore: registered new interface driver ax88179_178a Oct 3 05:13:55.933763 [ 1.712675] usbcore: registered new interface driver cdc_ether Oct 3 05:13:55.933825 [ 1.718588] usbcore: registered new interface driver smsc75xx Oct 3 05:13:55.945752 [ 1.724393] usbcore: registered new interface driver smsc95xx Oct 3 05:13:55.945815 [ 1.730211] usbcore: registered new interface driver net1080 Oct 3 05:13:55.957761 [ 1.735949] usbcore: registered new interface driver cdc_subset Oct 3 05:13:55.957825 [ 1.741972] usbcore: registered new interface driver zaurus Oct 3 05:13:55.969741 [ 1.747580] usbcore: registered new interface driver cdc_ncm Oct 3 05:13:55.969804 [ 1.757189] usbcore: registered new interface driver usb-storage Oct 3 05:13:55.981686 [ 1.814077] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 05:13:56.029626 [ 1.822889] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T05:13:57 UTC (1727932437) Oct 3 05:13:56.041644 [ 1.831477] i2c_dev: i2c /dev entries driver Oct 3 05:13:56.053728 [ 1.841744] syscon-poweroff 10040000.system-controller:syscon-poweroff: pm_power_off already claimed for psci_sys_poweroff Oct 3 05:13:56.065738 [ 1.851443] syscon-poweroff: probe of 10040000.system-controller:syscon-poweroff failed with error -16 Oct 3 05:13:56.077768 [ 1.862669] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 05:13:56.089730 [ 1.873486] device-mapper: uevent: version 1.0.3 Oct 3 05:13:56.089791 [ 1.876954] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Oct 3 05:13:56.101769 [ 1.885970] cpu cpu0: OPP table can't be empty Oct 3 05:13:56.101828 [ 1.890983] failed to register cpuidle driver Oct 3 05:13:56.113784 [ 1.894176] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Oct 3 05:13:56.113848 [ 1.902472] sdhci: Secure Digital Host Controller Interface driver Oct 3 05:13:56.125750 [ 1.907542] sdhci: Copyright(c) Pierre Ossman Oct 3 05:13:56.125810 [ 1.915566] sdhci-pltfm: SDHCI platform and OF driver helper Oct 3 05:13:56.137840 [ 1.923225] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 05:13:56.149659 [ 1.928553] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Oct 3 05:13:56.149695 [ 1.935134] usbcore: registered new interface driver usbhid Oct 3 05:13:56.161726 [ 1.940045] usbhid: USB HID core driver Oct 3 05:13:56.161785 [ 1.950831] NET: Registered PF_INET6 protocol family Oct 3 05:13:56.173761 [ 1.955427] Segment Routing with IPv6 Oct 3 05:13:56.173820 [ 1.958246] In-situ OAM (IOAM) with IPv6 Oct 3 05:13:56.173866 [ 1.962206] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Oct 3 05:13:56.185768 [ 1.968620] NET: Registered PF_PACKET protocol family Oct 3 05:13:56.185829 [ 1.973279] can: controller area network core Oct 3 05:13:56.197657 [ 1.977767] NET: Registered PF_CAN protocol family Oct 3 05:13:56.197711 [ 1.982548] can: raw protocol Oct 3 05:13:56.197737 [ 1.985587] can: broadcast manager protocol Oct 3 05:13:56.209768 [ 1.989897] can: netlink gateway - max_hops=1 Oct 3 05:13:56.209827 [ 1.994504] Key type dns_resolver registered Oct 3 05:13:56.209874 [ 1.999235] ThumbEE CPU extension supported. Oct 3 05:13:56.221785 [ 2.002952] Registering SWP/SWPB emulation handler Oct 3 05:13:56.221876 [ 2.008311] Loading compiled-in X.509 certificates Oct 3 05:13:56.233774 [ 2.036596] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 05:13:56.257664 [ 2.042733] clk: Not disabling unused clocks Oct 3 05:13:56.257698 [ 2.049856] Freeing unused kernel image (initmem) memory: 2048K Oct 3 05:13:56.269654 [ 2.055939] Run /init as init process Oct 3 05:13:56.269686 Loading, please wait... Oct 3 05:13:56.305699 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 05:13:56.365674 [ 3.454447] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 05:13:57.673847 [ 3.469516] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 05:13:57.697892 [ 3.521286] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 05:13:57.745933 [ 3.537696] phy phy-12130000.phy.9: phy_power_on was called before phy_init Oct 3 05:13:57.757833 [ 3.543305] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 05:13:57.769826 [ 3.548880] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Oct 3 05:13:57.769895 [ 3.557017] Synopsys Designware Multimedia Card Interface Driver Oct 3 05:13:57.781784 [ 3.567036] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 05:13:57.793969 [ 3.567060] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 05:13:57.794036 [ 3.579637] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 Oct 3 05:13:57.805831 [ 3.586226] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 05:13:57.805900 [ 3.593261] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 05:13:57.817886 [ 3.600628] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 05:13:57.829799 [ 3.618772] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 05:13:57.841916 [ 3.633076] hub 1-0:1.0: USB hub found Oct 3 05:13:57.853826 [ 3.635463] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 05:13:57.853891 [ 3.639591] hub 1-0:1.0: 3 ports detected Oct 3 05:13:57.865736 [ 3.642009] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 05:13:57.865770 [ 3.651649] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 127,32 bit host data width,128 deep fifo Oct 3 05:13:57.877733 [ 3.661601] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 05:13:57.889734 [ 3.667799] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 05:13:57.889769 [ 3.673136] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo Oct 3 05:13:57.901745 [ 3.674090] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 05:13:57.913726 [ 3.683022] mmc_host mmc1: card is polling. Oct 3 05:13:57.913760 [ 3.694485] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 05:13:57.925750 [ 3.703576] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Oct 3 05:13:57.925791 [ 3.712462] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 05:13:57.937706 [ 3.748059] phy phy-12130000.phy.9: phy_power_on was called before phy_init Oct 3 05:13:57.973811 [ 3.753670] exynos-ohci 12120000.usb: USB Host Controller Oct 3 05:13:57.973846 [ 3.759208] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Oct 3 05:13:57.985695 [ 3.777281] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 05:13:57.997812 [ 3.783730] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 05:13:58.009744 [ 3.799491] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 Oct 3 05:13:58.021860 [ 3.804510] scsi host0: ahci-dwc Oct 3 05:13:58.021926 [ 3.808145] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 128 Oct 3 05:13:58.033793 [ 3.872421] hub 2-0:1.0: USB hub found Oct 3 05:13:58.093707 [ 3.874995] hub 2-0:1.0: 3 ports detected Oct 3 05:13:58.093740 [ 3.894078] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 05:13:58.117775 [ 3.914171] mmc0: new high speed SDHC card at address aaaa Oct 3 05:13:58.129767 [ 3.914831] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Oct 3 05:13:58.141774 [ 3.930432] s3c-rtc 101e0000.rtc: registered as rtc1 Oct 3 05:13:58.153768 [ 3.939727] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 05:13:58.165797 [ 3.948524] mmcblk0: mmc0:aaaa SU04G 3.69 GiB Oct 3 05:13:58.165829 [ 3.970233] mmc1: new DDR MMC card at address 0001 Oct 3 05:13:58.189751 [ 3.978806] mmcblk1: mmc1:0001 M4G1FB 3.64 GiB Oct 3 05:13:58.201747 [ 3.984461] mmcblk1: p1 p2 p3 p4 Oct 3 05:13:58.201790 [ 3.989536] mmcblk1boot0: mmc1:0001 M4G1FB 1.00 MiB Oct 3 05:13:58.213750 [ 4.001282] mmcblk1boot1: mmc1:0001 M4G1FB 1.00 MiB Oct 3 05:13:58.225851 [ 4.006574] mmcblk1rpmb: mmc1:0001 M4G1FB 128 KiB, chardev (238:0) Oct 3 05:13:58.225928 [ 4.327670] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 05:13:58.549648 [ 4.334297] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 05:13:58.561616 [ 4.339673] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 05:13:58.561653 [ 4.359181] ata1.00: configured for UDMA/133 Oct 3 05:13:58.573722 [ 4.362754] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 05:13:58.585810 [ 4.379907] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 05:13:58.597761 [ 4.386026] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 05:13:58.609643 [ 4.392062] sd 0:0:0:0: [sda] Write Protect is off Oct 3 05:13:58.609677 [ 4.406218] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 05:13:58.633708 [ 4.426816] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 05:13:58.645727 [ 4.462189] sda: sda1 sda2 < sda5 > Oct 3 05:13:58.681729 [ 4.472240] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 05:13:58.693721 [ 4.486115] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 05:13:58.705730 [ 4.503436] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Oct 3 05:13:58.729758 [ 4.510400] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 05:13:58.729822 [ 4.514774] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 05:13:58.741713 [ 4.553911] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 05:13:58.777772 [ 4.563074] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Oct 3 05:13:58.789760 [ 4.568271] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 05:13:58.789824 [ 4.573593] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 05:13:58.801766 [ 4.581382] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 05:13:58.801831 [ 4.588793] hub 3-0:1.0: USB hub found Oct 3 05:13:58.813749 [ 4.591769] hub 3-0:1.0: 1 port detected Oct 3 05:13:58.813810 [ 4.596475] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 05:13:58.825739 [ 4.604726] hub 4-0:1.0: USB hub found Oct 3 05:13:58.825822 [ 4.607769] hub 4-0:1.0: 1 port detected Oct 3 05:13:58.825871 [ 4.664576] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 05:13:58.885777 [ 4.738487] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 05:13:58.969677 [ 4.847078] I/O error, dev mmcblk0, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 05:13:59.077679 [ 4.955183] I/O error, dev mmcblk0, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 05:13:59.185687 [ 5.063294] I/O error, dev mmcblk0, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 05:13:59.293711 [ 5.171370] I/O error, dev mmcblk0, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 05:13:59.401737 [ 5.279432] I/O error, dev mmcblk0, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 05:13:59.509728 [ 5.387484] I/O error, dev mmcblk0, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 05:13:59.617795 [ 5.495547] I/O error, dev mmcblk0, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 05:13:59.725647 [ 5.603612] I/O error, dev mmcblk0, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 05:13:59.833832 [ 6.012323] I/O error, dev mmcblk0, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 05:14:00.241605 [ 6.120047] I/O error, dev mmcblk0, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 05:14:00.349819 [ 6.728364] Buffer I/O error on dev mmcblk0, logical block 968056, async page read Oct 3 05:14:00.949758 [ 7.097628] random: crng init done Oct 3 05:14:01.321715 Begin: Loading essential drivers ... done. Oct 3 05:14:01.841706 Begin: Running /scripts/init-premount ... done. Oct 3 05:14:04.849008 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 05:14:04.861056 Begin: Running /scripts/local-premount ... done. Oct 3 05:14:04.872968 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 05:14:04.957005 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 05:14:05.041010 /dev/mapper/arndale--westfield--vg-root: clean, 46659/1220608 files, 653047/4882432 blocks Oct 3 05:14:05.244990 done. Oct 3 05:14:05.256831 [ 11.039882] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 05:14:05.268932 [ 11.369020] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 05:14:05.596879 done. Oct 3 05:14:05.596879 Begin: Running /scripts/local-bottom ... done. Oct 3 05:14:05.644862 Begin: Running /scripts/init-bottom ... done. Oct 3 05:14:05.692827 INIT: version 3.06 booting Oct 3 05:14:06.224866 INIT: No inittab.d directory found Oct 3 05:14:06.296863 Using makefile-style concurrent boot in runlevel S. Oct 3 05:14:06.612816 Starting hotplug events dispatcher: systemd-udevd. Oct 3 05:14:08.165053 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 05:14:08.645037 Synthesizing the initial hotplug events (devices)...[ 14.736145] wm8994 3-001a: Device is not a WM8994, ID is 0 Oct 3 05:14:08.957067 [ 14.743672] wm8994: probe of 3-001a failed with error -22 Oct 3 05:14:08.972997 [ 15.398649] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Oct 3 05:14:09.621044 done. Oct 3 05:14:09.668976 [ 15.449324] mc: Linux media interface: v0.10 Waiting for /dev to be fully populated... Oct 3 05:14:09.680853 [ 15.534457] s5p-secss 10830000.sss: s5p-sss driver registered Oct 3 05:14:09.764820 [ 15.554023] videodev: Linux video capture interface: v2.00 Oct 3 05:14:09.776881 [ 15.767794] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 05:14:09.996843 [ 15.840258] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 05:14:10.068932 [ 15.894972] s5p-mfc 11000000.codec: Adding to iommu group 0 Oct 3 05:14:10.114853 [ 15.919617] exynos-gsc 13e00000.gsc: Adding to iommu group 1 Oct 3 05:14:10.140867 [ 15.930134] exynos-gsc 13e10000.gsc: Adding to iommu group 2 Oct 3 05:14:10.152895 [ 15.935287] exynos-gsc 13e20000.gsc: Adding to iommu group 3 Oct 3 05:14:10.164469 [ 15.942213] exynos-gsc 13e30000.gsc: Adding to iommu group 4 Oct 3 05:14:10.164469 [ 15.946512] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Oct 3 05:14:10.176910 [ 15.956293] blk_print_req_error: 6 callbacks suppressed Oct 3 05:14:10.176910 [ 15.956303] I/O error, dev mmcblk0, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 05:14:10.188850 [ 16.036472] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 05:14:10.260898 [ 16.044183] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 05:14:10.272924 [ 16.052884] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 05:14:10.285033 [ 16.066867] s5p-mfc 11000000.codec: decoder registered as /dev/video4 Oct 3 05:14:10.296922 [ 16.074257] I/O error, dev mmcblk0, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 05:14:10.296922 [ 16.082828] usb3503 usb-hub: switched to HUB mode Oct 3 05:14:10.308877 [ 16.086979] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 05:14:10.308877 [ 16.103557] s5p-mfc 11000000.codec: encoder registered as /dev/video5 Oct 3 05:14:10.332834 [ 16.183766] I/O error, dev mmcblk0, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 05:14:10.416798 [ 16.293271] I/O error, dev mmcblk0, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 05:14:10.524863 [ 16.398735] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Oct 3 05:14:10.620886 [ 16.407572] I/O error, dev mmcblk0, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 05:14:10.632895 [ 16.447683] usb 1-3: new high-speed USB device number 2 using exynos-ehci Oct 3 05:14:10.668889 [ 16.515701] I/O error, dev mmcblk0, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 05:14:10.740902 [ 16.623815] I/O error, dev mmcblk0, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 05:14:10.848906 [ 16.649304] hub 1-3:1.0: USB hub found Oct 3 05:14:10.872883 [ 16.651859] hub 1-3:1.0: 3 ports detected Oct 3 05:14:10.872883 [ 16.731928] I/O error, dev mmcblk0, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 05:14:10.956901 [ 16.821793] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 05:14:11.052922 [ 16.829482] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 05:14:11.052922 [ 16.838168] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 05:14:11.064917 [ 16.848954] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 05:14:11.076911 [ 16.857828] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 05:14:11.088918 [ 16.866482] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 05:14:11.100844 [ 16.997663] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 05:14:11.220885 [ 17.141304] I/O error, dev mmcblk0, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 05:14:11.368929 [ 17.151797] hub 1-3.2:1.0: USB hub found Oct 3 05:14:11.368929 [ 17.154822] hub 1-3.2:1.0: 4 ports detected Oct 3 05:14:11.380861 [ 17.219785] usbcore: registered new device driver onboard-usb-hub Oct 3 05:14:11.440861 [ 17.249076] I/O error, dev mmcblk0, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 05:14:11.476815 [ 17.350538] hub 1-3.2:1.0: USB hub found Oct 3 05:14:11.572951 [ 17.353544] hub 1-3.2:1.0: 4 ports detected Oct 3 05:14:11.572951 [ 17.365316] hub 1-3.2:1.0: USB hub found Oct 3 05:14:11.583206 [ 17.368287] hub 1-3.2:1.0: 4 ports detected Oct 3 05:14:11.596823 [ 17.687653] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 05:14:11.912871 [ 17.842041] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 05:14:12.068879 [ 17.858124] Buffer I/O error on dev mmcblk0, logical block 968056, async page read Oct 3 05:14:12.080890 [ 18.539785] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 05:14:12.764917 [ 18.554656] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Oct 3 05:14:12.788924 [ 18.564475] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 72:1e:e8:c2:6d:86 Oct 3 05:14:12.800856 done. Oct 3 05:14:13.028831 [ 19.195472] EXT4-fs (dm-0): re-mounted. Quota mode: disabled. Oct 3 05:14:13.414445 Checking file systems.../dev/sda1: clean, 2105/61056 files, 43332/243968 blocks Oct 3 05:14:14.889028 done. Oct 3 05:14:14.924990 Cleaning up temporary files... /tmp Oct 3 05:14:15.149817 . Oct 3 05:14:15.149890 [ 21.119960] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 05:14:15.341832 [ 21.168631] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 05:14:15.389766 [ 21.264047] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k Oct 3 05:14:15.485715 Mounting local filesystems...done. Oct 3 05:14:15.744735 Activating swapfile swap, if any...done. Oct 3 05:14:15.744735 Cleaning up temporary files.... Oct 3 05:14:15.792827 Starting Setting kernel variables: sysctl. Oct 3 05:14:15.924709 [ 23.102113] xenbr0: port 1(eth0) entered blocking state Oct 3 05:14:17.325770 [ 23.105972] xenbr0: port 1(eth0) entered disabled state Oct 3 05:14:17.325816 [ 23.111435] device eth0 entered promiscuous mode Oct 3 05:14:17.337681 [ 23.121409] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 05:14:17.349662 Configuring network interfaces...RTNETLINK answers: Operation not supported Oct 3 05:14:19.181691 Oct 3 05:14:19.181726 Waiting for xenbr0 to get ready (MAXWAIT is 2 seconds). Oct 3 05:14:19.181753 [ 25.295014] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 05:14:19.521775 [ 25.295061] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 3 05:14:19.521813 [ 25.307362] xenbr0: port 1(eth0) entered blocking state Oct 3 05:14:19.533770 [ 25.312603] xenbr0: port 1(eth0) entered forwarding state Oct 3 05:14:19.533770 [ 25.318180] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready Oct 3 05:14:19.545690 done. Oct 3 05:14:19.725620 Cleaning up temporary files.... Oct 3 05:14:19.797597 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Oct 3 05:14:19.845598 Starting nftables: none Oct 3 05:14:19.941731 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Oct 3 05:14:20.025673 failed! Oct 3 05:14:20.025702 startpar: service(s) returned failure: nftables ... failed! Oct 3 05:14:20.037636 INIT: Entering runlevel: 2 Oct 3 05:14:20.049646 Using makefile-style concurrent boot in runlevel 2. Oct 3 05:14:20.073639 Starting Apache httpd web server: apache2AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.149.64.45. Set the 'ServerName' directive globally to suppress this message Oct 3 05:14:20.805783 . Oct 3 05:14:21.849633 Starting SMP IRQ Balancer: irqbalance Oct 3 05:14:22.365749 . Oct 3 05:14:22.365815 Starting NTP server: ntpd2024-10-03T05:14:23 ntpd[1147]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 05:14:22.377743 2024-10-03T05:14:23 ntpd[1147]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 05:14:22.389660 . Oct 3 05:14:22.389711 Starting system message bus: dbus. Oct 3 05:14:22.629749 Starting OpenBSD Secure Shell server: sshd. Oct 3 05:14:23.457689 (XEN) common/grant_table.c:1909:d0v1 Expanding d0 grant table from 1 to 2 frames Oct 3 05:14:25.593859 Starting /usr/local/sbin/xenstored... Oct 3 05:14:25.605845 Setting domain 0 name, domid and JSON config... Oct 3 05:14:25.605905 Done setting up Dom0 Oct 3 05:14:25.605948 Starting xenconsoled... Oct 3 05:14:25.605990 Starting QEMU as disk backend for dom0 Oct 3 05:14:25.617778 [ 31.537737] vif vif-1 enX1: renamed from eth1 Oct 3 05:14:25.761806 Starting libvirt management daemon: libvirtd2024-10-03 05:14:27.412+0000: 1239: info : libvirt version: 10.9.0 Oct 3 05:14:26.661895 2024-10-03 05:14:27.412+0000: 1239: info : hostname: arndale-westfield Oct 3 05:14:26.673773 2024-10-03 05:14:27.412+0000: 1239: debug : virLogParseOutputs:1638 : outputs=1:file:/var/log/libvirt/libvirtd.log Oct 3 05:14:26.685773 2024-10-03 05:14:27.457+0000: 1239: debug : virLogParseOutput:1485 : output=1:file:/var/log/libvirt/libvirtd.log Oct 3 05:14:26.685814 . Oct 3 05:14:26.685836 Oct 3 05:14:27.825823 Debian GNU/Linux 12 arndale-westfield hvc0 Oct 3 05:14:27.825890 Oct 3 05:14:27.825929 arndale-westfield login: [ 117.604936] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 05:15:51.829679 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 05:16:06.861674 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 05:22:47.245722 [ 633.909776] EXT4-fs (dm-3): unmounting filesystem. Oct 3 05:24:28.121689 [ 640.885685] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 05:24:35.109802 [ 645.988189] EXT4-fs (dm-3): unmounting filesystem. Oct 3 05:24:40.205665 [ 664.284043] xenbr0: port 2(vif1.0) entered blocking state Oct 3 05:24:58.501837 [ 664.288134] xenbr0: port 2(vif1.0) entered disabled state Oct 3 05:24:58.501920 [ 664.293710] device vif1.0 entered promiscuous mode Oct 3 05:24:58.513707 (XEN) d1v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 05:24:59.605706 (XEN) d1v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 05:24:59.629690 (XEN) gnttab_mark_dirty not implemented yet Oct 3 05:25:00.229765 (XEN) common/grant_table.c:1909:d1v0 Expanding d1 grant table from 1 to 2 frames Oct 3 05:25:00.253765 [ 666.238297] vif vif-1-0 vif1.0: Guest Rx ready Oct 3 05:25:00.453967 [ 666.241572] IPv6: ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready Oct 3 05:25:00.454040 [ 666.248219] xenbr0: port 2(vif1.0) entered blocking state Oct 3 05:25:00.465731 [ 666.253354] xenbr0: port 2(vif1.0) entered forwarding state Oct 3 05:25:00.465791 [ 709.687338] xenbr0: port 2(vif1.0) entered disabled state Oct 3 05:25:43.901795 [ 709.898304] xenbr0: port 2(vif1.0) entered disabled state Oct 3 05:25:44.117757 [ 709.902983] device vif1.0 left promiscuous mode Oct 3 05:25:44.117819 [ 709.906967] xenbr0: port 2(vif1.0) entered disabled state Oct 3 05:25:44.129609 [ 766.091968] xenbr0: port 2(vif2.0) entered blocking state Oct 3 05:26:40.304887 [ 766.096000] xenbr0: port 2(vif2.0) entered disabled state Oct 3 05:26:40.316873 [ 766.101677] device vif2.0 entered promiscuous mode Oct 3 05:26:40.316935 (XEN) d2v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 05:26:41.420853 (XEN) d2v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 05:26:41.432849 (XEN) common/grant_table.c:1909:d2v0 Expanding d2 grant table from 1 to 2 frames Oct 3 05:26:42.445677 [ 768.340433] vif vif-2-0 vif2.0: Guest Rx ready Oct 3 05:26:42.553860 [ 768.343644] IPv6: ADDRCONF(NETDEV_CHANGE): vif2.0: link becomes ready Oct 3 05:26:42.553922 [ 768.350316] xenbr0: port 2(vif2.0) entered blocking state Oct 3 05:26:42.565856 [ 768.355570] xenbr0: port 2(vif2.0) entered forwarding state Oct 3 05:26:42.565912 [ 803.891129] xenbr0: port 2(vif2.0) entered disabled state Oct 3 05:27:18.105822 [ 804.048087] xenbr0: port 2(vif2.0) entered disabled state Oct 3 05:27:18.261819 [ 804.052480] device vif2.0 left promiscuous mode Oct 3 05:27:18.261880 [ 804.056728] xenbr0: port 2(vif2.0) entered disabled state Oct 3 05:27:18.273686 [ 859.672971] xenbr0: port 2(vif3.0) entered blocking state Oct 3 05:28:13.892905 [ 859.677006] xenbr0: port 2(vif3.0) entered disabled state Oct 3 05:28:13.892991 [ 859.682672] device vif3.0 entered promiscuous mode Oct 3 05:28:13.904625 (XEN) d3v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 05:28:14.992830 (XEN) d3v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 05:28:15.004675 (XEN) common/grant_table.c:1909:d3v0 Expanding d3 grant table from 1 to 2 frames Oct 3 05:28:15.860701 [ 861.720031] vif vif-3-0 vif3.0: Guest Rx ready Oct 3 05:28:15.932700 [ 861.723263] IPv6: ADDRCONF(NETDEV_CHANGE): vif3.0: link becomes ready Oct 3 05:28:15.944752 [ 861.729823] xenbr0: port 2(vif3.0) entered blocking state Oct 3 05:28:15.944752 [ 861.735121] xenbr0: port 2(vif3.0) entered forwarding state Oct 3 05:28:15.956649 [ 901.052266] xenbr0: port 2(vif3.0) entered disabled state Oct 3 05:28:55.268896 [ 901.189918] xenbr0: port 2(vif3.0) entered disabled state Oct 3 05:28:55.400981 [ 901.200151] device vif3.0 left promiscuous mode Oct 3 05:28:55.412920 [ 901.203339] xenbr0: port 2(vif3.0) entered disabled state Oct 3 05:28:55.424809 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 05:29:28.433676 [ 955.774889] xenbr0: port 2(vif4.0) entered blocking state Oct 3 05:29:49.989773 [ 955.778966] xenbr0: port 2(vif4.0) entered disabled state Oct 3 05:29:49.989847 [ 955.784573] device vif4.0 entered promiscuous mode Oct 3 05:29:50.001707 (XEN) d4v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 05:29:51.093717 (XEN) d4v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 05:29:51.105732 (XEN) common/grant_table.c:1909:d4v0 Expanding d4 grant table from 1 to 2 frames Oct 3 05:29:52.041752 [ 957.982254] vif vif-4-0 vif4.0: Guest Rx ready Oct 3 05:29:52.197677 [ 957.992855] IPv6: ADDRCONF(NETDEV_CHANGE): vif4.0: link becomes ready Oct 3 05:29:52.209797 [ 957.998244] xenbr0: port 2(vif4.0) entered blocking state Oct 3 05:29:52.209883 [ 958.003396] xenbr0: port 2(vif4.0) entered forwarding state Oct 3 05:29:52.221697 [ 997.256709] xenbr0: port 2(vif4.0) entered disabled state Oct 3 05:30:31.465790 [ 997.398245] xenbr0: port 2(vif4.0) entered disabled state Oct 3 05:30:31.609874 [ 997.402946] device vif4.0 left promiscuous mode Oct 3 05:30:31.609935 [ 997.406895] xenbr0: port 2(vif4.0) entered disabled state Oct 3 05:30:31.621725 [ 1051.926173] xenbr0: port 2(vif5.0) entered blocking state Oct 3 05:31:26.137717 [ 1051.930242] xenbr0: port 2(vif5.0) entered disabled state Oct 3 05:31:26.149715 [ 1051.935843] device vif5.0 entered promiscuous mode Oct 3 05:31:26.149783 (XEN) d5v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 05:31:27.241732 (XEN) d5v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 05:31:27.265686 (XEN) common/grant_table.c:1909:d5v0 Expanding d5 grant table from 1 to 2 frames Oct 3 05:31:28.333682 [ 1054.294499] vif vif-5-0 vif5.0: Guest Rx ready Oct 3 05:31:28.501711 [ 1054.307437] IPv6: ADDRCONF(NETDEV_CHANGE): vif5.0: link becomes ready Oct 3 05:31:28.525738 [ 1054.313007] xenbr0: port 2(vif5.0) entered blocking state Oct 3 05:31:28.525802 [ 1054.318336] xenbr0: port 2(vif5.0) entered forwarding state Oct 3 05:31:28.537678 [ 1093.572027] xenbr0: port 2(vif5.0) entered disabled state Oct 3 05:32:07.785737 [ 1093.708225] xenbr0: port 2(vif5.0) entered disabled state Oct 3 05:32:07.917684 [ 1093.717953] device vif5.0 left promiscuous mode Oct 3 05:32:07.929782 [ 1093.721138] xenbr0: port 2(vif5.0) entered disabled state Oct 3 05:32:07.941637 [ 1149.305965] xenbr0: port 2(vif6.0) entered blocking state Oct 3 05:33:03.513768 [ 1149.310051] xenbr0: port 2(vif6.0) entered disabled state Oct 3 05:33:03.525764 [ 1149.315636] device vif6.0 entered promiscuous mode Oct 3 05:33:03.525826 (XEN) d6v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 05:33:04.629742 (XEN) d6v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 05:33:04.653683 (XEN) common/grant_table.c:1909:d6v0 Expanding d6 grant table from 1 to 2 frames Oct 3 05:33:05.289749 [ 1151.244494] vif vif-6-0 vif6.0: Guest Rx ready Oct 3 05:33:05.457786 [ 1151.247723] IPv6: ADDRCONF(NETDEV_CHANGE): vif6.0: link becomes ready Oct 3 05:33:05.457853 [ 1151.254219] xenbr0: port 2(vif6.0) entered blocking state Oct 3 05:33:05.469767 [ 1151.259617] xenbr0: port 2(vif6.0) entered forwarding state Oct 3 05:33:05.469830 [ 1188.443627] xenbr0: port 2(vif6.0) entered disabled state Oct 3 05:33:42.657703 [ 1188.638646] xenbr0: port 2(vif6.0) entered disabled state Oct 3 05:33:42.849827 [ 1188.643335] device vif6.0 left promiscuous mode Oct 3 05:33:42.849861 [ 1188.647373] xenbr0: port 2(vif6.0) entered disabled state Oct 3 05:33:42.861682 [ 1244.137817] xenbr0: port 2(vif7.0) entered blocking state Oct 3 05:34:38.353789 [ 1244.141851] xenbr0: port 2(vif7.0) entered disabled state Oct 3 05:34:38.353866 [ 1244.147521] device vif7.0 entered promiscuous mode Oct 3 05:34:38.365667 (XEN) d7v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 05:34:39.445863 (XEN) d7v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 05:34:39.457821 (XEN) common/grant_table.c:1909:d7v0 Expanding d7 grant table from 1 to 2 frames Oct 3 05:34:40.429783 [ 1246.357143] vif vif-7-0 vif7.0: Guest Rx ready Oct 3 05:34:40.573787 [ 1246.360775] IPv6: ADDRCONF(NETDEV_CHANGE): vif7.0: link becomes ready Oct 3 05:34:40.573854 [ 1246.366876] xenbr0: port 2(vif7.0) entered blocking state Oct 3 05:34:40.585779 [ 1246.372244] xenbr0: port 2(vif7.0) entered forwarding state Oct 3 05:34:40.585844 [ 1285.881819] xenbr0: port 2(vif7.0) entered disabled state Oct 3 05:35:20.089732 [ 1286.008413] xenbr0: port 2(vif7.0) entered disabled state Oct 3 05:35:20.221704 [ 1286.012912] device vif7.0 left promiscuous mode Oct 3 05:35:20.221739 [ 1286.017066] xenbr0: port 2(vif7.0) entered disabled state Oct 3 05:35:20.233656 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 05:36:10.013648 [ 1341.691259] xenbr0: port 2(vif8.0) entered blocking state Oct 3 05:36:15.900892 [ 1341.695295] xenbr0: port 2(vif8.0) entered disabled state Oct 3 05:36:15.912911 [ 1341.700972] device vif8.0 entered promiscuous mode Oct 3 05:36:15.912911 (XEN) d8v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 05:36:16.988995 (XEN) d8v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 05:36:17.012781 (XEN) common/grant_table.c:1909:d8v0 Expanding d8 grant table from 1 to 2 frames Oct 3 05:36:18.056952 [ 1344.019876] vif vif-8-0 vif8.0: Guest Rx ready Oct 3 05:36:18.224925 [ 1344.023168] IPv6: ADDRCONF(NETDEV_CHANGE): vif8.0: link becomes ready Oct 3 05:36:18.236897 [ 1344.030211] xenbr0: port 2(vif8.0) entered blocking state Oct 3 05:36:18.236897 [ 1344.034986] xenbr0: port 2(vif8.0) entered forwarding state Oct 3 05:36:18.248900 [ 1379.218858] xenbr0: port 2(vif8.0) entered disabled state Oct 3 05:36:53.424848 [ 1379.388073] xenbr0: port 2(vif8.0) entered disabled state Oct 3 05:36:53.592824 [ 1379.392830] device vif8.0 left promiscuous mode Oct 3 05:36:53.604871 [ 1379.396734] xenbr0: port 2(vif8.0) entered disabled state Oct 3 05:36:53.604871 [ 1434.150627] xenbr0: port 2(vif9.0) entered blocking state Oct 3 05:37:48.353867 [ 1434.154663] xenbr0: port 2(vif9.0) entered disabled state Oct 3 05:37:48.365799 [ 1434.160355] device vif9.0 entered promiscuous mode Oct 3 05:37:48.365895 (XEN) d9v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 05:37:49.457688 (XEN) d9v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 05:37:49.469709 (XEN) common/grant_table.c:1909:d9v0 Expanding d9 grant table from 1 to 2 frames Oct 3 05:37:50.357763 [ 1436.357655] vif vif-9-0 vif9.0: Guest Rx ready Oct 3 05:37:50.561773 [ 1436.360796] IPv6: ADDRCONF(NETDEV_CHANGE): vif9.0: link becomes ready Oct 3 05:37:50.573814 [ 1436.368975] xenbr0: port 2(vif9.0) entered blocking state Oct 3 05:37:50.573876 [ 1436.373726] xenbr0: port 2(vif9.0) entered forwarding state Oct 3 05:37:50.585753 [ 1475.812254] xenbr0: port 2(vif9.0) entered disabled state Oct 3 05:38:30.021759 [ 1475.928360] xenbr0: port 2(vif9.0) entered disabled state Oct 3 05:38:30.141744 [ 1475.933076] device vif9.0 left promiscuous mode Oct 3 05:38:30.141806 [ 1475.937083] xenbr0: port 2(vif9.0) entered disabled state Oct 3 05:38:30.153662 [ 1531.550213] xenbr0: port 2(vif10.0) entered blocking state Oct 3 05:39:25.761853 [ 1531.554347] xenbr0: port 2(vif10.0) entered disabled state Oct 3 05:39:25.784944 [ 1531.560080] device vif10.0 entered promiscuous mode Oct 3 05:39:25.785080 (XEN) d10v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 05:39:26.869644 (XEN) d10v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 05:39:26.881824 (XEN) common/grant_table.c:1909:d10v0 Expanding d10 grant table from 1 to 2 frames Oct 3 05:39:27.865892 [ 1533.787756] vif vif-10-0 vif10.0: Guest Rx ready Oct 3 05:39:27.997773 [ 1533.791091] IPv6: ADDRCONF(NETDEV_CHANGE): vif10.0: link becomes ready Oct 3 05:39:27.997839 [ 1533.797927] xenbr0: port 2(vif10.0) entered blocking state Oct 3 05:39:28.009768 [ 1533.803667] xenbr0: port 2(vif10.0) entered forwarding state Oct 3 05:39:28.009832 [ 1573.327649] xenbr0: port 2(vif10.0) entered disabled state Oct 3 05:40:07.537715 [ 1573.469933] xenbr0: port 2(vif10.0) entered disabled state Oct 3 05:40:07.681777 [ 1573.478843] device vif10.0 left promiscuous mode Oct 3 05:40:07.681841 [ 1573.482112] xenbr0: port 2(vif10.0) entered disabled state Oct 3 05:40:07.693740 [ 1631.273602] xenbr0: port 2(vif11.0) entered blocking state Oct 3 05:41:05.477832 [ 1631.277759] xenbr0: port 2(vif11.0) entered disabled state Oct 3 05:41:05.489759 [ 1631.283461] device vif11.0 entered promiscuous mode Oct 3 05:41:05.489821 (XEN) d11v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 05:41:06.581713 (XEN) d11v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 05:41:06.605654 (XEN) common/grant_table.c:1909:d11v0 Expanding d11 grant table from 1 to 2 frames Oct 3 05:41:07.601615 [ 1633.461639] vif vif-11-0 vif11.0: Guest Rx ready Oct 3 05:41:07.673688 [ 1633.465003] IPv6: ADDRCONF(NETDEV_CHANGE): vif11.0: link becomes ready Oct 3 05:41:07.673688 [ 1633.471676] xenbr0: port 2(vif11.0) entered blocking state Oct 3 05:41:07.685659 [ 1633.477103] xenbr0: port 2(vif11.0) entered forwarding state Oct 3 05:41:07.685659 [ 1668.988831] xenbr0: port 2(vif11.0) entered disabled state Oct 3 05:41:43.200767 [ 1669.128309] xenbr0: port 2(vif11.0) entered disabled state Oct 3 05:41:43.336886 [ 1669.132953] device vif11.0 left promiscuous mode Oct 3 05:41:43.336886 [ 1669.137179] xenbr0: port 2(vif11.0) entered disabled state Oct 3 05:41:43.348823 [ 1726.139410] xenbr0: port 2(vif12.0) entered blocking state Oct 3 05:42:40.349835 [ 1726.143525] xenbr0: port 2(vif12.0) entered disabled state Oct 3 05:42:40.349920 [ 1726.149294] device vif12.0 entered promiscuous mode Oct 3 05:42:40.361713 (XEN) d12v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 05:42:41.441748 (XEN) d12v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 05:42:41.453751 (XEN) common/grant_table.c:1909:d12v0 Expanding d12 grant table from 1 to 2 frames Oct 3 05:42:42.557768 [ 1728.490462] vif vif-12-0 vif12.0: Guest Rx ready Oct 3 05:42:42.701746 [ 1728.493830] IPv6: ADDRCONF(NETDEV_CHANGE): vif12.0: link becomes ready Oct 3 05:42:42.701812 [ 1728.500488] xenbr0: port 2(vif12.0) entered blocking state Oct 3 05:42:42.713723 [ 1728.505875] xenbr0: port 2(vif12.0) entered forwarding state Oct 3 05:42:42.713788 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 05:42:51.381719 [ 1761.268664] xenbr0: port 2(vif12.0) entered disabled state Oct 3 05:43:15.469762 [ 1761.388217] xenbr0: port 2(vif12.0) entered disabled state Oct 3 05:43:15.589719 [ 1761.392914] device vif12.0 left promiscuous mode Oct 3 05:43:15.601729 [ 1761.397107] xenbr0: port 2(vif12.0) entered disabled state Oct 3 05:43:15.601793 Oct 3 05:43:36.874544 (XEN) *** Serial input to Xen (type 'CTRL-x' three times to switch input) Oct 3 05:43:36.897723 Oct 3 05:43:36.898445 Oct 3 05:43:37.910476 (XEN) '0' pressed -> dumping Dom0's registers Oct 3 05:43:37.929792 (XEN) *** Dumping Dom0 vcpu#0 state: *** Oct 3 05:43:37.929832 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Oct 3 05:43:37.931883 Not tainted ]---- Oct 3 05:43:37.941733 (XEN) CPU: 0 Oct 3 05:43:37.941787 (XEN) PC: c031ce28 Oct 3 05:43:37.941831 (XEN) CPSR: 600d0093 MODE:32-bit Guest SVC Oct 3 05:43:37.941878 (XEN) R0: 00000005 R1: 00000000 R2: 004c0d69 R3: c031ce20 Oct 3 05:43:37.953859 (XEN) R4: c1909d80 R5: c1b12200 R6: c1904d1c R7: c1904d78 Oct 3 05:43:37.953922 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c00 Oct 3 05:43:37.965771 (XEN) USR: SP: beebe948 LR: b6be1893 Oct 3 05:43:37.965830 (XEN) SVC: SP: c1901f40 LR: c0308df0 SPSR:600d0013 Oct 3 05:43:37.965878 (XEN) ABT: SP: c1b22b10 LR: c0300ea0 SPSR:600f0193 Oct 3 05:43:37.977773 (XEN) UND: SP: c1b22b20 LR: c0300fa0 SPSR:600d0093 Oct 3 05:43:37.977834 (XEN) IRQ: SP: c1b22b00 LR: c0300ba0 SPSR:600d0193 Oct 3 05:43:37.989707 (XEN) FIQ: SP: c1b22b30 LR: c1b22b30 SPSR:00000000 Oct 3 05:43:37.989739 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 05:43:37.989768 (XEN) Oct 3 05:43:38.001706 (XEN) SCTLR: 10c5387d Oct 3 05:43:38.001760 (XEN) TCR: 00000000 Oct 3 05:43:38.001805 (XEN) TTBR0: 00000000626bc06a Oct 3 05:43:38.001829 (XEN) TTBR1: 000000006020406a Oct 3 05:43:38.001853 (XEN) IFAR: b6ea7318, IFSR: 00000007 Oct 3 05:43:38.013774 (XEN) DFAR: 0056b318, DFSR: 0000081f Oct 3 05:43:38.013833 (XEN) Oct 3 05:43:38.013874 (XEN) VTCR_EL2: 80003558 Oct 3 05:43:38.013917 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 05:43:38.025737 (XEN) Oct 3 05:43:38.025790 (XEN) SCTLR_EL2: 30cd187f Oct 3 05:43:38.025835 (XEN) HCR_EL2: 007c663f Oct 3 05:43:38.025878 (XEN) TTBR0_EL2: 000000004110e000 Oct 3 05:43:38.025921 (XEN) Oct 3 05:43:38.025960 (XEN) ESR_EL2: 07e00000 Oct 3 05:43:38.037769 (XEN) HPFAR_EL2: 00104810 Oct 3 05:43:38.037826 (XEN) HDFAR: e0807f00 Oct 3 05:43:38.037865 (XEN) HIFAR: c09cfe78 Oct 3 05:43:38.037889 (XEN) Oct 3 05:43:38.037910 (XEN) Guest stack trace from sp=c1901f40: Oct 3 05:43:38.049723 (XEN) Failed to convert stack to physical address Oct 3 05:43:38.049785 (XEN) *** Dumping Dom0 vcpu#1 state: *** Oct 3 05:43:38.049840 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 05:43:38.061767 (XEN) CPU: 0 Oct 3 05:43:38.061822 (XEN) PC: c031ce28 Oct 3 05:43:38.061866 (XEN) CPSR: 600f0093 MODE:32-bit Guest SVC Oct 3 05:43:38.061912 (XEN) R0: 00000005 R1: 00000000 R2: 0041c189 R3: c031ce20 Oct 3 05:43:38.073657 (XEN) R4: c210e600 R5: c1b12200 R6: c1904d1c R7: c1904d78 Oct 3 05:43:38.073691 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c00 Oct 3 05:43:38.085658 (XEN) USR: SP: bee16970 LR: b6e146c5 Oct 3 05:43:38.085690 (XEN) SVC: SP: e08c9f90 LR: c0308df0 SPSR:600f0030 Oct 3 05:43:38.085717 (XEN) ABT: SP: c1b22b50 LR: c03011c0 SPSR:600d0193 Oct 3 05:43:38.097661 (XEN) UND: SP: c1b22b60 LR: c0300fa0 SPSR:600f0093 Oct 3 05:43:38.097714 (XEN) IRQ: SP: c1b22b40 LR: c0300ba0 SPSR:600f0193 Oct 3 05:43:38.109657 (XEN) FIQ: SP: c1b22b70 LR: c1b22b70 SPSR:00000000 Oct 3 05:43:38.109690 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 05:43:38.121671 (XEN) Oct 3 05:43:38.121699 (XEN) SCTLR: 10c5387d Oct 3 05:43:38.121723 (XEN) TCR: 00000000 Oct 3 05:43:38.121746 (XEN) TTBR0: 00000000625fc06a Oct 3 05:43:38.121769 (XEN) TTBR1: 000000006020406a Oct 3 05:43:38.133658 (XEN) IFAR: b6def814, IFSR: 00000007 Oct 3 05:43:38.133690 (XEN) DFAR: b6adf73b, DFSR: 00000017 Oct 3 05:43:38.133715 (XEN) Oct 3 05:43:38.133736 (XEN) VTCR_EL2: 80003558 Oct 3 05:43:38.133759 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 05:43:38.145652 (XEN) Oct 3 05:43:38.145681 (XEN) SCTLR_EL2: 30cd187f Oct 3 05:43:38.145707 (XEN) HCR_EL2: 007c663f Oct 3 05:43:38.145731 (XEN) TTBR0_EL2: 000000004110e000 Oct 3 05:43:38.145754 (XEN) Oct 3 05:43:38.145774 (XEN) ESR_EL2: 07e00000 Oct 3 05:43:38.157781 (XEN) HPFAR_EL2: 00104810 Oct 3 05:43:38.157837 (XEN) HDFAR: e0807f00 Oct 3 05:43:38.157871 (XEN) HIFAR: c09cfe78 Oct 3 05:43:38.157897 (XEN) Oct 3 05:43:38.157918 (XEN) Guest stack trace from sp=e08c9f90: Oct 3 05:43:38.169690 (XEN) Failed to convert stack to physical address Oct 3 05:43:38.169746 Oct 3 05:43:39.901632 (XEN) 'H' pressed -> dumping heap info (now = 1791016333750) Oct 3 05:43:39.921716 (XEN) heap[node=0][zone=0] -> 16276 pages Oct 3 05:43:39.921726 (XEN) heap[node=0][zone=1] -> 0 Oct 3 05:43:39.923914 pages Oct 3 05:43:39.933770 (XEN) heap[node=0][zone=2] -> 0 pages Oct 3 05:43:39.933829 (XEN) heap[node=0][zone=3] -> 0 pages Oct 3 05:43:39.933874 (XEN) heap[node=0][zone=4] -> 0 pages Oct 3 05:43:39.933916 (XEN) heap[node=0][zone=5] -> 0 pages Oct 3 05:43:39.945818 (XEN) heap[node=0][zone=6] -> 0 pages Oct 3 05:43:39.945876 (XEN) heap[node=0][zone=7] -> 0 pages Oct 3 05:43:39.945921 (XEN) heap[node=0][zone=8] -> 0 pages Oct 3 05:43:39.957777 (XEN) heap[node=0][zone=9] -> 0 pages Oct 3 05:43:39.957809 (XEN) heap[node=0][zone=10] -> 0 pages Oct 3 05:43:39.957834 (XEN) heap[node=0][zone=11] -> 0 pages Oct 3 05:43:39.957858 (XEN) heap[node=0][zone=12] -> 0 pages Oct 3 05:43:39.969668 (XEN) heap[node=0][zone=13] -> 0 pages Oct 3 05:43:39.969700 (XEN) heap[node=0][zone=14] -> 0 pages Oct 3 05:43:39.969725 (XEN) heap[node=0][zone=15] -> 0 pages Oct 3 05:43:39.981747 (XEN) heap[node=0][zone=16] -> 0 pages Oct 3 05:43:39.981806 (XEN) heap[node=0][zone=17] -> 0 pages Oct 3 05:43:39.981852 (XEN) heap[node=0][zone=18] -> 0 pages Oct 3 05:43:39.981895 (XEN) heap[node=0][zone=19] -> 130835 pages Oct 3 05:43:39.993772 (XEN) heap[node=0][zone=20] -> 241605 pages Oct 3 05:43:39.993831 (XEN) heap[node=0][zone=21] -> 0 pages Oct 3 05:43:39.993876 (XEN) heap[node=0][zone=22] -> 0 pages Oct 3 05:43:40.005673 (XEN) heap[node=0][zone=23] -> 0 pages Oct 3 05:43:40.005738 (XEN) heap[node=0][zone=24] -> 0 pages Oct 3 05:43:40.005783 (XEN) heap[node=0][zone=25] -> 0 pages Oct 3 05:43:40.017714 (XEN) heap[node=0][zone=26] -> 0 pages Oct 3 05:43:40.017747 (XEN) heap[node=0][zone=27] -> 0 pages Oct 3 05:43:40.017771 (XEN) heap[node=0][zone=28] -> 0 pages Oct 3 05:43:40.017794 Oct 3 05:43:41.897593 Oct 3 05:43:43.688890 Oct 3 05:43:43.905428 Oct 3 05:43:45.696055 Oct 3 05:43:45.914590 (XEN) Dumping timer queues: Oct 3 05:43:45.936920 (XEN) CPU00: Oct 3 05:43:45.936949 (XEN) ex= 5571us timer=43fee968 cb=vtimer.c#virt_timer_expired(43fee960) Oct 3 05:43:45.936949 (XEN) CPU Oct 3 05:43:45.939121 01: Oct 3 05:43:45.948788 (XEN) ex= 397553us timer=43fdc968 cb=vtimer.c#virt_timer_expired(43fdc960) Oct 3 05:43:45.948788 Oct 3 05:43:47.927520 Oct 3 05:43:49.704784 Oct 3 05:43:49.952388 (XEN) 'd' pressed -> dumping registers Oct 3 05:43:49.977013 (XEN) Oct 3 05:43:49.977060 (XEN) *** Dumping CPU0 host state: *** Oct 3 05:43:49.977060 (XEN) ----[ Xen-4.20-unstable arm32 debug=y N Oct 3 05:43:49.979407 ot tainted ]---- Oct 3 05:43:49.988827 (XEN) CPU: 0 Oct 3 05:43:49.988827 (XEN) PC: 0025f53c domain.c#idle_loop+0x130/0x1ac Oct 3 05:43:49.988827 (XEN) CPSR: 600d005a MODE:Hypervisor Oct 3 05:43:49.988827 (XEN) R0: 00000000 R1: 00000001 R2: 00000000 R3: 00000000 Oct 3 05:43:50.000995 (XEN) R4: 00000000 R5: 003000e0 R6: 00331324 R7: 00000001 Oct 3 05:43:50.001047 (XEN) R8: 00331104 R9: 00000000 R10:40e00000 R11:4003ff54 R12:fffffffc Oct 3 05:43:50.012961 (XEN) HYP: SP: 4003ff44 LR: 00225b7c Oct 3 05:43:50.012961 (XEN) Oct 3 05:43:50.012961 (XEN) VTCR_EL2: 80003558 Oct 3 05:43:50.012961 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 05:43:50.024866 (XEN) Oct 3 05:43:50.024866 (XEN) SCTLR_EL2: 30cd187f Oct 3 05:43:50.024866 (XEN) HCR_EL2: 007c663f Oct 3 05:43:50.025162 (XEN) TTBR0_EL2: 000000004110e000 Oct 3 05:43:50.025235 (XEN) Oct 3 05:43:50.025258 (XEN) ESR_EL2: 07e00000 Oct 3 05:43:50.036886 (XEN) HPFAR_EL2: 00104810 Oct 3 05:43:50.036886 (XEN) HDFAR: e0807f00 Oct 3 05:43:50.036886 (XEN) HIFAR: c09cfe78 Oct 3 05:43:50.036886 (XEN) Oct 3 05:43:50.036886 (XEN) Xen stack trace from sp=4003ff44: Oct 3 05:43:50.048896 (XEN) 07e00000 00295014 002919bc 4003ff4c 002678fc 00000000 00000000 00000000 Oct 3 05:43:50.048896 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 05:43:50.060884 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 05:43:50.060884 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 05:43:50.072862 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 05:43:50.084895 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 05:43:50.084895 (XEN) Xen call trace: Oct 3 05:43:50.084895 (XEN) [<0025f53c>] domain.c#idle_loop+0x130/0x1ac (PC) Oct 3 05:43:50.096895 (XEN) [<00225b7c>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 05:43:50.096895 (XEN) [<002678fc>] arch_get_xen_caps+0/0x90 Oct 3 05:43:50.096895 (XEN) Oct 3 05:43:50.108891 (XEN) *** Dumping CPU1 host state: *** Oct 3 05:43:50.108891 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 05:43:50.108891 (XEN) CPU: 1 Oct 3 05:43:50.108891 (XEN) PC: 0025f53c domain.c#idle_loop+0x130/0x1ac Oct 3 05:43:50.121032 (XEN) CPSR: 600f005a MODE:Hypervisor Oct 3 05:43:50.121097 (XEN) R0: 00000000 R1: 00000001 R2: 3fd06000 R3: 00000000 Oct 3 05:43:50.132879 (XEN) R4: 00000001 R5: 003000e0 R6: 00331324 R7: 00000002 Oct 3 05:43:50.133031 (XEN) R8: 00331104 R9: 00000001 R10:40e00000 R11:4000ff54 R12:fffffffc Oct 3 05:43:50.144897 (XEN) HYP: SP: 4000ff44 LR: 00225b7c Oct 3 05:43:50.144897 (XEN) Oct 3 05:43:50.144897 (XEN) VTCR_EL2: 80003558 Oct 3 05:43:50.144897 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 05:43:50.144897 (XEN) Oct 3 05:43:50.144897 (XEN) SCTLR_EL2: 30cd187f Oct 3 05:43:50.156890 (XEN) HCR_EL2: 007c663f Oct 3 05:43:50.156890 (XEN) TTBR0_EL2: 00000000ba004000 Oct 3 05:43:50.156890 (XEN) Oct 3 05:43:50.156890 (XEN) ESR_EL2: 07e00000 Oct 3 05:43:50.156890 (XEN) HPFAR_EL2: 00104810 Oct 3 05:43:50.168908 (XEN) HDFAR: e0807f00 Oct 3 05:43:50.168958 (XEN) HIFAR: c0a19dbc Oct 3 05:43:50.169014 (XEN) Oct 3 05:43:50.169050 (XEN) Xen stack trace from sp=4000ff44: Oct 3 05:43:50.169108 (XEN) 07e00000 00301290 00000001 4000ff3c 002681e0 00000000 00000000 00000000 Oct 3 05:43:50.180891 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 05:43:50.192878 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 05:43:50.192878 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 05:43:50.204969 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 05:43:50.205007 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 05:43:50.217015 (XEN) Xen call trace: Oct 3 05:43:50.217049 (XEN) [<0025f53c>] domain.c#idle_loop+0x130/0x1ac (PC) Oct 3 05:43:50.217076 (XEN) [<00225b7c>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 05:43:50.229007 (XEN) [<002681e0>] start_secondary+0x204/0x20c Oct 3 05:43:50.229040 (XEN) Oct 3 05:43:50.229062 Oct 3 05:43:51.960533 (XEN) 'e' pressed -> dumping event-channel info Oct 3 05:43:51.977124 (XEN) Event channel information for domain 0: Oct 3 05:43:51.977198 (XEN) Polling vCPUs: {} Oct 3 05:43:51.977291 (XEN) port Oct 3 05:43:51.979822 [p/m/s] Oct 3 05:43:51.988997 (XEN) 1 [0/0/ - ]: s=3 n=1 x=0 d=0 p=4 Oct 3 05:43:51.989054 (XEN) 2 [0/0/ - ]: s=5 n=0 x=0 v=2 Oct 3 05:43:51.989100 (XEN) 3 [0/0/ - ]: s=5 n=1 x=0 v=3 Oct 3 05:43:52.001094 (XEN) 4 [0/0/ - ]: s=3 n=0 x=0 d=0 p=1 Oct 3 05:43:52.001154 (XEN) 5 [0/0/ - ]: s=3 n=1 x=0 d=0 p=6 Oct 3 05:43:52.001200 (XEN) 6 [0/0/ - ]: s=3 n=0 x=0 d=0 p=5 Oct 3 05:43:52.010836 Oct 3 05:43:53.969745 (XEN) gnttab_usage_print_all [ key 'g' pressed Oct 3 05:43:53.993763 (XEN) -------- active -------- -------- shared -------- Oct 3 05:43:53.993833 (XEN) [ref] localdo Oct 3 05:43:53.996396 m mfn pin localdom gmfn flags Oct 3 05:43:54.009765 (XEN) grant-table for remote d0 (v1) Oct 3 05:43:54.009825 (XEN) 2 frames (64 max), 2 maptrack frames (1024 max) Oct 3 05:43:54.009874 (XEN) [0x208] 0 0x648b4 0x00000001 0 0x0648b4 0x19 Oct 3 05:43:54.021809 (XEN) [0x209] 0 0x648b3 0x00000001 0 0x0648b3 0x19 Oct 3 05:43:54.021872 (XEN) gnttab_usage_print_all ] done Oct 3 05:43:54.021918 Oct 3 05:43:55.941728 Oct 3 05:43:57.715617 Oct 3 05:43:57.945270 (XEN) Physical memory information: Oct 3 05:43:57.961797 (XEN) Xen heap: 65104kB free Oct 3 05:43:57.961858 (XEN) heap[19]: 523340kB free Oct 3 05:43:57.961903 (XEN) heap[20]: 966420kB fr Oct 3 05:43:57.964178 ee Oct 3 05:43:57.973597 (XEN) Dom heap: 1489760kB free Oct 3 05:43:57.973653 Oct 3 05:43:59.957174 Oct 3 05:44:01.725575 Oct 3 05:44:01.969539 (XEN) sched_smt_power_savings: disabled Oct 3 05:44:01.989848 (XEN) NOW=1813084545541 Oct 3 05:44:01.989906 (XEN) Online Cpus: 0-1 Oct 3 05:44:01.989950 (XEN) Cpupool 0: Oct 3 05:44:01.989992 (XEN) Cpus: 0-1 Oct 3 05:44:01.990033 (XEN) Sched Oct 3 05:44:01.992366 uling granularity: cpu, 1 CPU per sched-resource Oct 3 05:44:02.001735 (XEN) Scheduler: SMP Credit Scheduler rev2 (credit2) Oct 3 05:44:02.001793 (XEN) Active queues: 1 Oct 3 05:44:02.001837 (XEN) default-weight = 256 Oct 3 05:44:02.013805 (XEN) Runqueue 0: Oct 3 05:44:02.013862 (XEN) ncpus = 2 Oct 3 05:44:02.013907 (XEN) cpus = 0-1 Oct 3 05:44:02.013950 (XEN) max_weight = 256 Oct 3 05:44:02.028654 (XEN) pick_bias = 0 Oct 3 05:44:02.028654 (XEN) instload = 0 Oct 3 05:44:02.028654 (XEN) aveload = 1438 (~0%) Oct 3 05:44:02.028654 (XEN) idlers: 2 Oct 3 05:44:02.028654 (XEN) tickled: 0 Oct 3 05:44:02.040852 (XEN) fully idle cores: 2 Oct 3 05:44:02.040935 (XEN) Domain info: Oct 3 05:44:02.040978 (XEN) Domain: 0 w 256 c 0 v 2 Oct 3 05:44:02.041021 (XEN) 1: [0.0] flags=0 cpu=0 credit=6833870 [w=256] load=1337 (~0%) Oct 3 05:44:02.052677 (XEN) 2: [0.1] flags=0 cpu=1 credit=10106917 [w=256] load=140 (~0%) Oct 3 05:44:02.052677 (XEN) Runqueue 0: Oct 3 05:44:02.052677 (XEN) CPU[00] runq=0, sibling={0}, core={0-1} Oct 3 05:44:02.064735 (XEN) CPU[01] runq=0, sibling={1}, core={0-1} Oct 3 05:44:02.064735 (XEN) RUNQ: Oct 3 05:44:02.064735 (XEN) CPUs info: Oct 3 05:44:02.064735 (XEN) CPU[00] current=d[IDLE]v0, curr=d[IDLE]v0, prev=NULL Oct 3 05:44:02.076696 (XEN) CPU[01] current=d[IDLE]v1, curr=d[IDLE]v1, prev=NULL Oct 3 05:44:02.076696 Oct 3 05:44:03.963147 Oct 3 05:44:05.738763 Oct 3 05:44:05.964799 (XEN) Synced stime skew: max=125ns avg=125ns samples=1 current=125ns Oct 3 05:44:05.993674 (XEN) Synced cycles skew: max=1 avg=1 samples=1 current=1 Oct 3 05:44:05.993721 Oct 3 05:44:05.995883 Oct 3 05:44:07.951067 Oct 3 05:44:09.747808 Oct 3 05:44:09.988334 Oct 3 05:44:11.754179 Oct 3 05:44:11.999844 Oct 3 05:44:13.763296 Oct 3 05:44:24.000122 (XEN) 'q' pressed -> dumping domain info (now = 1835116761333) Oct 3 05:44:24.021849 (XEN) General information for domain 0: Oct 3 05:44:24.021908 (XEN) refcnt=3 dying=0 paus Oct 3 05:44:24.024241 e_count=0 Oct 3 05:44:24.033727 (XEN) nr_pages=131072 xenheap_pages=3 dirty_cpus={} max_pages=131072 Oct 3 05:44:24.033789 (XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=00000020 Oct 3 05:44:24.045779 (XEN) p2m mappings for domain 0 (vmid 1): Oct 3 05:44:24.045837 (XEN) 1G mappings: 0 (shattered 0) Oct 3 05:44:24.045887 (XEN) 2M mappings: 233 (shattered 23) Oct 3 05:44:24.057747 (XEN) 4K mappings: 6810 Oct 3 05:44:24.057805 (XEN) Rangesets belonging to domain 0: Oct 3 05:44:24.057851 (XEN) Interrupts { 32-72, 74, 77-79, 82-84, 86, 88-100, 103-104, 107-110, 114, 116-120, 123, 126-128, 138, 144, 146-147, 149-151, 156 } Oct 3 05:44:24.069791 (XEN) I/O Memory { 2020-2050, 3810-3811, 3830-3831, 3860-3861, 10000-10001, 10010-10045, 10050-10055, 10060-10061, 101b0-101b1, 101d0-101d1, 101e0-101e1, 10440-10441, 10800-10801, 10830-10831, 10850-10851, 10a60-10a61, 10d10-10d11, 11000-11010, 11200-11201, 11210-11211, 11400-11401, 11800-11805, 11c00-11c01, 11c10-11c11, 11d40-11d41, 11f20-11f21, 12000-12010, 12100-12101, 12110-12111, 12120-12121, 12130-12131, 12170-12171, 121a0-121a1, 121b0-121b1, 121d0-121d1, 12200-12201, 12210-12211, 12220-12221, 12230-12231, 12250-12251, 122f0-122f1, 12c00-12c01, 12c10-12c11, 12c30-12c31, 12c60-12c61, 12c70-12c71, 12c80-12c81, 12c90-12c91, 12ca0-12ca1, 12cb0-12cb1, 12cc0-12cc1, 12cd0-12cd1, 12ce0-12ce1, 12d10-12d11, 12d20-12d21, 12d30-12d31, 12d40-12d41, 12d60-12d61, 12d70-12d71, 12dd0-12dd1, 13260-13261, 13270-13271, 13280-13281, 13290-13291, 132a0-132a1, 132b0-132b1, 132c0-132c1, 132d0-132d1, 132e0-132e1, 132f0-132f1, 13400-13401, 13c40-13c41, 13c50-13c51, 13e00-13e01, 13e10-13e11, 13e20-13e21, 13e30-13e31, 13e80-13e81, 13e90-13e91, 13ea0-13ea1, 13eb0-13eb1, 14400-14440, 14450-14460, 14500-14510, 14530-145a0, 145b0-145b1, 14640-14641, 14650-14651 } Oct 3 05:44:24.165765 (XEN) NODE affinity for domain 0: [0] Oct 3 05:44:24.177777 (XEN) VCPU information and callbacks for domain 0: Oct 3 05:44:24.177839 (XEN) UNIT0 affinities: hard={0-1} soft={0-1} Oct 3 05:44:24.177886 (XEN) VCPU0: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 05:44:24.189765 (XEN) pause_count=0 pause_flags=1 Oct 3 05:44:24.189823 (XEN) GICH_LRs (vcpu 0) mask=0 Oct 3 05:44:24.189867 (XEN) VCPU_LR[0]=0 Oct 3 05:44:24.201770 (XEN) VCPU_LR[1]=0 Oct 3 05:44:24.201825 (XEN) VCPU_LR[2]=0 Oct 3 05:44:24.201868 (XEN) VCPU_LR[3]=0 Oct 3 05:44:24.201908 (XEN) No periodic timer Oct 3 05:44:24.201950 (XEN) UNIT1 affinities: hard={0-1} soft={0-1} Oct 3 05:44:24.213767 (XEN) VCPU1: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 05:44:24.213835 (XEN) pause_count=0 pause_flags=1 Oct 3 05:44:24.213882 (XEN) GICH_LRs (vcpu 1) mask=0 Oct 3 05:44:24.225756 (XEN) VCPU_LR[0]=0 Oct 3 05:44:24.225811 (XEN) VCPU_LR[1]=0 Oct 3 05:44:24.225853 (XEN) VCPU_LR[2]=0 Oct 3 05:44:24.225894 (XEN) VCPU_LR[3]=0 Oct 3 05:44:24.225934 (XEN) No periodic timer Oct 3 05:44:24.237742 (XEN) Notifying guest 0:0 (virq 1, port 0) Oct 3 05:44:24.237803 (XEN) Notifying guest 0:1 (virq 1, port 0) Oct 3 05:44:24.237848 Oct 3 05:44:35.979596 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 05:44:36.001961 Oct 3 05:44:36.002015 arndale-westfield login: Oct 3 05:44:36.003870 [ 1932.078531] vif vif-1: 5 starting transaction Oct 3 05:46:06.280906 [ 1932.081526] vif vif-1: 5 starting transaction Oct 3 05:46:06.292846 [ 1937.127658] xenbus_probe_frontend: xenbus_frontend_dev_shutdown: device/vif/1 timeout closing device Oct 3 05:46:11.329725 [ 1937.135591] sd 0:0:0:0: [sda] Synchronizing SCSI cache Oct 3 05:46:11.341736 [ 1937.146590] wake enabled for irq 119 (gpx1-4) Oct 3 05:46:11.341798 [ 1937.149654] wake enabled for irq 120 (gpx1-5) Oct 3 05:46:11.353769 [ 1937.154001] wake enabled for irq 121 (gpx1-6) Oct 3 05:46:11.353830 [ 1937.158444] wake enabled for irq 122 (gpx1-7) Oct 3 05:46:11.365771 [ 1937.162855] wake enabled for irq 123 (gpx2-0) Oct 3 05:46:11.365833 [ 1937.167281] wake enabled for irq 124 (gpx2-1) Oct 3 05:46:11.365881 [ 1937.172225] reboot: Resô Oct 3 05:46:11.713751 Oct 3 05:46:11.713775 Oct 3 05:46:11.713843 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 05:46:11.713896 Oct 3 05:46:11.713934 CPU: Exynos5250@1000MHz Oct 3 05:46:11.713977 Oct 3 05:46:11.714015 Board: Arndale Oct 3 05:46:11.714060 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 05:46:11.725818 ready Oct 3 05:46:11.725895 DRAM: 2 GiB Oct 3 05:46:11.725938 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 05:46:11.749709 trace: enabled Oct 3 05:46:11.785715 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 05:46:12.145668 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 05:46:12.205701 In: serial Oct 3 05:46:12.205757 Out: serial Oct 3 05:46:12.205799 Err: serial Oct 3 05:46:12.205840 SCSI: ARNDALE SCSI INIT Oct 3 05:46:12.205882 Target spinup took 0 ms. Oct 3 05:46:12.217742 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 05:46:12.217806 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 05:46:12.217856 Net: Net Initialization Skipped Oct 3 05:46:12.229740 No ethernet found. Oct 3 05:46:12.229797 Hostname: arndale-westfield Oct 3 05:46:12.229841 Hit any key to stop autoboot: 2  1  0 Oct 3 05:46:14.149756 (Re)start USB... Oct 3 05:46:14.149825 USB0: USB EHCI 1.00 Oct 3 05:46:14.161672 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 05:46:19.757645 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 05:46:19.757645 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 05:46:20.213549 Waiting for Ethernet connection... done. Oct 3 05:46:21.809612 BOOTP broadcast 1 Oct 3 05:46:21.809612 BOOTP broadcast 2 Oct 3 05:46:22.709760 DHCP client bound to address 10.149.64.45 (937 ms) Oct 3 05:46:22.709873 Using asx0 device Oct 3 05:46:22.709873 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 05:46:22.722173 Filename 'pxelinux.0'. Oct 3 05:46:22.722236 Load address: 0x43e00000 Oct 3 05:46:22.722280 Loading: *### Oct 3 05:46:22.733732 2.4 MiB/s Oct 3 05:46:22.733788 done Oct 3 05:46:22.733829 Bytes transferred = 42430 (a5be hex) Oct 3 05:46:22.745839 missing environment variable: pxeuuid Oct 3 05:46:22.745899 Retrieving file: pxelinux.cfg/0A95402D Oct 3 05:46:22.745947 Using asx0 device Oct 3 05:46:22.745989 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 05:46:22.757776 Filename 'pxelinux.cfg/0A95402D'. Oct 3 05:46:22.757835 Load address: 0x51000000 Oct 3 05:46:22.757880 Loading: *# Oct 3 05:46:22.757921 236.3 KiB/s Oct 3 05:46:22.769773 done Oct 3 05:46:22.769827 Bytes transferred = 728 (2d8 hex) Oct 3 05:46:22.769873 Config file found Oct 3 05:46:22.769915 Ignoring unknown command: serial Oct 3 05:46:22.769959 1: ^Overwrite Oct 3 05:46:22.770000 Retrieving file: /osstest/tmp//arndale-westfield--initrd.gz Oct 3 05:46:22.781785 Using asx0 device Oct 3 05:46:22.781841 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 05:46:22.781891 Filename '/osstest/tmp//arndale-westfield--initrd.gz'. Oct 3 05:46:22.793703 Load address: 0x43300000 Oct 3 05:46:22.793703 Loading: *################################################################# Oct 3 05:46:23.117688 ################################################################# Oct 3 05:46:23.441654 ################################################################# Oct 3 05:46:23.765692 ################################################################# Oct 3 05:46:24.089639 ################################################################# Oct 3 05:46:24.413692 ################################################################# Oct 3 05:46:24.749670 ################################################################# Oct 3 05:46:25.061677 ################################################################# Oct 3 05:46:25.385655 ################################################################# Oct 3 05:46:25.709619 ################################################################# Oct 3 05:46:26.037872 ################################################################# Oct 3 05:46:26.369787 ################################################################# Oct 3 05:46:26.693611 ################################################################# Oct 3 05:46:26.993703 ################################################################# Oct 3 05:46:27.293705 ################################################################# Oct 3 05:46:27.593655 ################################################################# Oct 3 05:46:27.905704 ################################################################# Oct 3 05:46:28.217669 ################################################################# Oct 3 05:46:28.517623 ################################################################# Oct 3 05:46:28.805602 ################################################################# Oct 3 05:46:29.093668 ################################################################# Oct 3 05:46:29.393665 ################################################################# Oct 3 05:46:29.693628 ################################################################# Oct 3 05:46:30.005696 ################################################################# Oct 3 05:46:30.305681 ################################################################# Oct 3 05:46:30.617687 ################################################################# Oct 3 05:46:30.917684 ################################################################# Oct 3 05:46:31.217721 ######################################## Oct 3 05:46:31.409743 2.8 MiB/s Oct 3 05:46:31.409799 done Oct 3 05:46:31.409839 Bytes transferred = 26339175 (191e767 hex) Oct 3 05:46:31.409885 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/linux Oct 3 05:46:31.421729 Using asx0 device Oct 3 05:46:31.421729 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 05:46:31.433780 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/linux'. Oct 3 05:46:31.433848 Load address: 0x42000000 Oct 3 05:46:31.433892 Loading: *################################################################# Oct 3 05:46:31.769672 ################################################################# Oct 3 05:46:32.093591 ################################################################# Oct 3 05:46:32.417619 ################################################################# Oct 3 05:46:32.741714 ################################################################# Oct 3 05:46:33.069639 ############################################# Oct 3 05:46:33.285679 2.7 MiB/s Oct 3 05:46:33.297740 done Oct 3 05:46:33.297740 Bytes transferred = 5427712 (52d200 hex) Oct 3 05:46:33.297820 append: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=33306 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 05:46:33.333739 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb Oct 3 05:46:33.345743 Using asx0 device Oct 3 05:46:33.345821 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 05:46:33.357761 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb'. Oct 3 05:46:33.357874 Load address: 0x43000000 Oct 3 05:46:33.369696 Loading: *#### Oct 3 05:46:33.381654 2.3 MiB/s Oct 3 05:46:33.381736 done Oct 3 05:46:33.381736 Bytes transferred = 46686 (b65e hex) Oct 3 05:46:33.393788 Kernel image @ 0x42000000 [ 0x000000 - 0x52d200 ] Oct 3 05:46:33.393855 ## Flattened Device Tree blob at 43000000 Oct 3 05:46:33.393901 Booting using the fdt blob at 0x43000000 Oct 3 05:46:33.405688 Loading Ramdisk to 4e6e1000, end 4ffff767 ... OK Oct 3 05:46:33.825736 Loading Device Tree to 4e6d2000, end 4e6e065d ... OK Oct 3 05:46:33.825834 Oct 3 05:46:33.837691 Starting kernel ...(fake run for tracing) Oct 3 05:46:33.837752 Oct 3 05:46:33.837792 Oct 3 05:46:33.837829 Starting kernel ... Oct 3 05:46:33.849686 Oct 3 05:46:33.849752 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 05:46:39.945633 [ 0.000000] Linux version 6.1.0-25-armmp (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.106-3 (2024-08-26) Oct 3 05:46:39.969661 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 05:46:39.969661 [ 0.000000] CPU: div instructions available: patching division code Oct 3 05:46:39.981656 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 05:46:39.981656 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 05:46:39.993660 [ 0.000000] Memory policy: Data cache writealloc Oct 3 05:46:39.993660 [ 0.000000] efi: UEFI not found. Oct 3 05:46:40.005676 [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 Oct 3 05:46:40.005676 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 05:46:40.005676 [ 0.000000] Zone ranges: Oct 3 05:46:40.017673 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 05:46:40.017673 [ 0.000000] Normal empty Oct 3 05:46:40.017673 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 05:46:40.029700 [ 0.000000] Movable zone start for each node Oct 3 05:46:40.029700 [ 0.000000] Early memory node ranges Oct 3 05:46:40.041658 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 05:46:40.041658 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 05:46:40.053631 [ 0.000000] percpu: Embedded 18 pages/cpu s44692 r8192 d20844 u73728 Oct 3 05:46:40.053631 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 05:46:40.065665 [ 0.000000] Kernel command line: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=33306 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 05:46:40.101718 [ 0.000000] Unknown kernel command line parameters "preseed --- vga=normal auto=true hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=33306 domain=test-lab.xenproject.org", will be passed to user space. Oct 3 05:46:40.149683 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 05:46:40.149683 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 05:46:40.161679 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 05:46:40.161679 [ 0.000000] Memory: 2015968K/2097152K available (11264K kernel code, 1696K rwdata, 3724K rodata, 2048K init, 376K bss, 64800K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 05:46:40.185668 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 05:46:40.185668 [ 0.000000] ftrace: allocating 39612 entries in 117 pages Oct 3 05:46:40.197659 [ 0.000000] ftrace: allocated 117 pages with 5 groups Oct 3 05:46:40.197659 [ 0.000000] trace event string verifier disabled Oct 3 05:46:40.209660 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 05:46:40.209660 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 05:46:40.209660 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 05:46:40.221669 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 05:46:40.221669 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 05:46:40.233658 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 05:46:40.233658 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 05:46:40.245670 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 05:46:40.245670 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 05:46:40.257679 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 05:46:40.257679 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 05:46:40.269673 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 05:46:40.281666 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 05:46:40.281666 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 05:46:40.293658 [ 0.002619] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 05:46:40.293658 [ 0.002633] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 05:46:40.305657 [ 0.002648] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 05:46:40.317664 [ 0.002659] Ignoring duplicate/late registration of read_current_timer delay Oct 3 05:46:40.329661 [ 0.003017] Console: colour dummy device 80x30 Oct 3 05:46:40.329874 [ 0.003056] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 05:46:40.341668 [ 0.003069] CPU: Testing write buffer coherency: ok Oct 3 05:46:40.341668 [ 0.003114] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 05:46:40.353662 [ 0.003121] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 05:46:40.353662 [ 0.003128] pid_max: default: 32768 minimum: 301 Oct 3 05:46:40.365656 [ 0.003490] LSM: Security Framework initializing Oct 3 05:46:40.365656 [ 0.003563] landlock: Up and running. Oct 3 05:46:40.377665 [ 0.003567] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 05:46:40.377665 [ 0.003752] AppArmor: AppArmor initialized Oct 3 05:46:40.377665 [ 0.003764] TOMOYO Linux initialized Oct 3 05:46:40.389659 [ 0.003809] LSM support for eBPF active Oct 3 05:46:40.389659 [ 0.004054] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 05:46:40.401669 [ 0.004068] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 05:46:40.401669 [ 0.005501] /cpus/cpu@0 missing clock-frequency property Oct 3 05:46:40.413662 [ 0.005528] /cpus/cpu@1 missing clock-frequency property Oct 3 05:46:40.413662 [ 0.005541] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 05:46:40.425655 [ 0.006500] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 05:46:40.425655 [ 0.006507] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 05:46:40.437666 [ 0.006612] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 05:46:40.437666 [ 0.006617] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 05:46:40.449660 [ 0.006766] Setting up static identity map for 0x40300000 - 0x403000ac Oct 3 05:46:40.449660 [ 0.007924] rcu: Hierarchical SRCU implementation. Oct 3 05:46:40.461659 [ 0.007930] rcu: Max phase no-delay instances is 1000. Oct 3 05:46:40.461659 [ 0.010055] EFI services will not be available. Oct 3 05:46:40.473605 [ 0.010402] smp: Bringing up secondary CPUs ... Oct 3 05:46:40.473605 [ 0.011146] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 05:46:40.473605 [ 0.011158] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 05:46:40.485631 [ 0.011288] smp: Brought up 1 node, 2 CPUs Oct 3 05:46:40.497704 [ 0.011297] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 05:46:40.497754 [ 0.011305] CPU: All CPU(s) started in HYP mode. Oct 3 05:46:40.497780 [ 0.011309] CPU: Virtualization extensions available. Oct 3 05:46:40.509676 [ 0.011934] devtmpfs: initialized Oct 3 05:46:40.509708 [ 0.023332] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 05:46:40.521663 [ 0.023566] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 05:46:40.533670 [ 0.023592] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 05:46:40.533705 [ 0.024124] pinctrl core: initialized pinctrl subsystem Oct 3 05:46:40.545684 [ 0.024823] DMI not present or invalid. Oct 3 05:46:40.545720 [ 0.025496] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 05:46:40.545749 [ 0.030851] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 05:46:40.557680 [ 0.032398] audit: initializing netlink subsys (disabled) Oct 3 05:46:40.557715 [ 0.032604] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 Oct 3 05:46:40.569698 [ 0.033753] thermal_sys: Registered thermal governor 'fair_share' Oct 3 05:46:40.581749 [ 0.033761] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 05:46:40.581845 [ 0.033766] thermal_sys: Registered thermal governor 'step_wise' Oct 3 05:46:40.593691 [ 0.033770] thermal_sys: Registered thermal governor 'user_space' Oct 3 05:46:40.593725 [ 0.033775] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 05:46:40.605680 [ 0.034149] No ATAGs? Oct 3 05:46:40.605711 [ 0.034217] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 05:46:40.617659 [ 0.034226] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 05:46:40.617694 [ 0.035310] Serial: AMBA PL011 UART driver Oct 3 05:46:40.617720 [ 0.084788] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 05:46:40.629661 [ 0.091808] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 05:46:40.641665 [ 0.102821] iommu: Default domain type: Translated Oct 3 05:46:40.641698 [ 0.102829] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 05:46:40.653682 [ 0.103788] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 05:46:40.653717 [ 0.104323] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 05:46:40.665681 [ 0.104334] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 05:46:40.665715 [ 0.104870] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 05:46:40.677683 [ 0.104901] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 05:46:40.689649 [ 0.105083] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 05:46:40.689680 [ 0.105433] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 05:46:40.689706 [ 0.105444] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 05:46:40.701787 [ 0.105838] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 05:46:40.701850 [ 0.106126] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 05:46:40.713739 [ 0.106136] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 05:46:40.713775 [ 0.106415] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 05:46:40.725772 [ 0.106516] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 05:46:40.725833 [ 0.106525] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 05:46:40.737793 [ 0.106725] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 05:46:40.737827 [ 0.106922] pps_core: LinuxPPS API ver. 1 registered Oct 3 05:46:40.737888 [ 0.106927] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 05:46:40.749788 [ 0.106942] PTP clock support registered Oct 3 05:46:40.749853 [ 0.108593] NetLabel: Initializing Oct 3 05:46:40.761786 [ 0.108599] NetLabel: domain hash size = 128 Oct 3 05:46:40.761846 [ 0.108605] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 05:46:40.773772 [ 0.108659] NetLabel: unlabeled traffic allowed by default Oct 3 05:46:40.773806 [ 0.108842] vgaarb: loaded Oct 3 05:46:40.773855 [ 0.109505] clocksource: Switched to clocksource mct-frc Oct 3 05:46:40.785761 [ 0.177959] VFS: Disk quotas dquot_6.6.0 Oct 3 05:46:40.785793 [ 0.178051] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 05:46:40.797781 [ 0.178787] AppArmor: AppArmor Filesystem Enabled Oct 3 05:46:40.797842 [ 0.187889] NET: Registered PF_INET protocol family Oct 3 05:46:40.797891 [ 0.188097] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 05:46:40.809781 [ 0.189675] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 05:46:40.821789 [ 0.189768] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 05:46:40.821857 [ 0.189797] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 05:46:40.833798 [ 0.189891] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 05:46:40.845773 [ 0.190120] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 05:46:40.845856 [ 0.190346] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 05:46:40.857782 [ 0.190425] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 05:46:40.857846 [ 0.190464] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 05:46:40.869756 [ 0.190668] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 05:46:40.869819 [ 0.190703] NET: Registered PF_XDP protocol family Oct 3 05:46:40.881789 [ 0.190713] PCI: CLS 0 bytes, default 64 Oct 3 05:46:40.881848 [ 0.191616] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 05:46:40.893781 [ 0.192001] Trying to unpack rootfs image as initramfs... Oct 3 05:46:40.893842 [ 0.197607] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 05:46:40.905786 [ 0.199214] Initialise system trusted keyrings Oct 3 05:46:40.905845 [ 0.199284] Key type blacklist registered Oct 3 05:46:40.917770 [ 0.199514] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 05:46:40.917835 [ 0.206822] zbud: loaded Oct 3 05:46:40.917879 [ 0.208381] integrity: Platform Keyring initialized Oct 3 05:46:40.929755 [ 0.208409] integrity: Machine keyring initialized Oct 3 05:46:40.929815 [ 0.208417] Key type asymmetric registered Oct 3 05:46:40.929870 [ 0.208423] Asymmetric key parser 'x509' registered Oct 3 05:46:40.941775 [ 1.556179] Freeing initrd memory: 25724K Oct 3 05:46:40.941835 [ 1.567781] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 05:46:40.953779 [ 1.568060] bounce: pool size: 64 pages Oct 3 05:46:40.953839 [ 1.568244] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 05:46:40.965774 [ 1.568408] io scheduler mq-deadline registered Oct 3 05:46:40.965834 [ 1.573490] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 05:46:40.977774 [ 1.594218] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 05:46:40.977843 [ 1.594230] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 05:46:40.989740 [ 1.596489] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 05:46:41.001794 [ 1.596499] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 05:46:41.001867 [ 1.597342] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 05:46:41.013788 [ 1.597352] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 05:46:41.025782 [ 1.598264] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 05:46:41.025850 [ 1.598274] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 05:46:41.037792 [ 1.600567] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 05:46:41.049792 [ 1.603397] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 05:46:41.061739 [ 1.606194] Serial: AMBA driver Oct 3 05:46:41.061798 [ 1.606443] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 05:46:41.073779 [ 1.606923] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 05:46:41.073853 [ 1.607372] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 05:46:41.085798 [ 2.745471] printk: console [ttySAC2] enabled Oct 3 05:46:41.085858 [ 2.750295] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 05:46:41.097789 [ 2.760922] STM32 USART driver initialized Oct 3 05:46:41.097847 [ 2.775001] mousedev: PS/2 mouse device common for all mice Oct 3 05:46:41.121719 [ 2.806302] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 05:46:41.145742 [ 2.814906] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T05:46:43 UTC (1727934403) Oct 3 05:46:41.157789 [ 2.824762] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 05:46:41.169788 [ 2.832198] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 05:46:41.181738 [ 2.840185] NET: Registered PF_INET6 protocol family Oct 3 05:46:41.181801 [ 2.853858] Segment Routing with IPv6 Oct 3 05:46:41.193748 [ 2.856116] In-situ OAM (IOAM) with IPv6 Oct 3 05:46:41.205777 [ 2.860059] mip6: Mobile IPv6 Oct 3 05:46:41.205835 [ 2.862965] NET: Registered PF_PACKET protocol family Oct 3 05:46:41.205884 [ 2.868120] mpls_gso: MPLS GSO support Oct 3 05:46:41.205929 [ 2.872320] ThumbEE CPU extension supported. Oct 3 05:46:41.217776 [ 2.875963] Registering SWP/SWPB emulation handler Oct 3 05:46:41.217837 [ 2.881231] registered taskstats version 1 Oct 3 05:46:41.229733 [ 2.884831] Loading compiled-in X.509 certificates Oct 3 05:46:41.229794 [ 3.345533] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 05:46:41.697757 [ 3.352855] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 05:46:41.697832 [ 3.363865] zswap: loaded using pool lzo/zbud Oct 3 05:46:41.709776 [ 3.367898] Key type .fscrypt registered Oct 3 05:46:41.709836 [ 3.371182] Key type fscrypt-provisioning registered Oct 3 05:46:41.721736 [ 3.385044] Key type encrypted registered Oct 3 05:46:41.721796 [ 3.387640] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 05:46:41.733779 [ 3.393095] ima: No TPM chip found, activating TPM-bypass! Oct 3 05:46:41.733842 [ 3.398558] ima: Allocated hash algorithm: sha256 Oct 3 05:46:41.745776 [ 3.403281] ima: No architecture policies found Oct 3 05:46:41.745836 [ 3.407811] evm: Initialising EVM extended attributes: Oct 3 05:46:41.757787 [ 3.412864] evm: security.selinux Oct 3 05:46:41.757845 [ 3.416153] evm: security.SMACK64 (disabled) Oct 3 05:46:41.757892 [ 3.420402] evm: security.SMACK64EXEC (disabled) Oct 3 05:46:41.769779 [ 3.425003] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 05:46:41.769841 [ 3.430038] evm: security.SMACK64MMAP (disabled) Oct 3 05:46:41.769893 [ 3.434638] evm: security.apparmor Oct 3 05:46:41.781767 [ 3.438022] evm: security.ima Oct 3 05:46:41.781824 [ 3.440961] evm: security.capability Oct 3 05:46:41.781869 [ 3.444538] evm: HMAC attrs: 0x1 Oct 3 05:46:41.793674 [ 4.032503] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 05:46:42.372693 [ 4.038465] clk: Disabling unused clocks Oct 3 05:46:42.384874 [ 4.052179] Freeing unused kernel image (initmem) memory: 2048K Oct 3 05:46:42.396930 [ 4.057049] Checked W+X mappings: passed, no W+X pages found Oct 3 05:46:42.396930 [ 4.062310] Run /init as init process Oct 3 05:46:42.408861 [ 4.613707] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 05:46:42.964806 [ 4.676907] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 05:46:43.024933 [ 4.686883] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 05:46:43.036921 [ 4.698518] usbcore: registered new interface driver usbfs Oct 3 05:46:43.036921 [ 4.703184] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 05:46:43.049051 [ 4.716482] usbcore: registered new interface driver hub Oct 3 05:46:43.060965 [ 4.728842] usbcore: registered new device driver usb Oct 3 05:46:43.072882 [ 4.737025] phy phy-12130000.phy.3: phy_power_on was called before phy_init Oct 3 05:46:43.084878 [ 4.757571] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 05:46:43.096902 [ 4.771893] phy phy-12130000.phy.3: phy_power_on was called before phy_init Oct 3 05:46:43.120887 [ 4.784667] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Oct 3 05:46:43.132838 [ 4.809623] exynos-ohci 12120000.usb: USB Host Controller Oct 3 05:46:43.156847 [ 4.820500] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Oct 3 05:46:43.168851 [ 4.825929] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 05:46:43.168851 [ 4.841000] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Oct 3 05:46:43.192813 [ 4.869576] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 05:46:43.216878 [ 4.885491] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Oct 3 05:46:43.227610 [ 4.898760] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 05:46:43.241006 [ 4.905621] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 05:46:43.252891 [ 4.912782] usb usb1: Product: EHCI Host Controller Oct 3 05:46:43.252923 [ 4.917649] usb usb1: Manufacturer: Linux 6.1.0-25-armmp ehci_hcd Oct 3 05:46:43.264927 [ 4.923718] usb usb1: SerialNumber: 12110000.usb Oct 3 05:46:43.264927 [ 4.931203] hub 1-0:1.0: USB hub found Oct 3 05:46:43.276918 [ 4.933927] hub 1-0:1.0: 3 ports detected Oct 3 05:46:43.276918 [ 4.937914] usb3503 usb-hub: switched to HUB mode Oct 3 05:46:43.276918 [ 4.942209] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 05:46:43.288851 [ 4.955588] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 05:46:43.300882 [ 4.962460] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 05:46:43.312939 [ 4.969611] usb usb2: Product: USB Host Controller Oct 3 05:46:43.312939 [ 4.974385] usb usb2: Manufacturer: Linux 6.1.0-25-armmp ohci_hcd Oct 3 05:46:43.325046 [ 4.980462] usb usb2: SerialNumber: 12120000.usb Oct 3 05:46:43.325112 [ 4.987354] hub 2-0:1.0: USB hub found Oct 3 05:46:43.325158 [ 4.990831] hub 2-0:1.0: 3 ports detected Oct 3 05:46:43.336826 [ 5.250178] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 05:46:43.588845 [ 5.254238] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 05:46:43.600883 [ 5.261872] usb 1-3: new high-speed USB device number 2 using exynos-ehci Oct 3 05:46:43.612879 [ 5.269078] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 05:46:43.612879 [ 5.278072] xhci-hcd xhci-hcd.2.auto: irq 108, io mem 0x12000000 Oct 3 05:46:43.624878 [ 5.284231] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 05:46:43.624878 [ 5.289474] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 05:46:43.636896 [ 5.297135] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 05:46:43.648936 [ 5.303776] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 05:46:43.648936 [ 5.311857] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 05:46:43.660917 [ 5.319055] usb usb3: Product: xHCI Host Controller Oct 3 05:46:43.660917 [ 5.323914] usb usb3: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 05:46:43.672871 [ 5.329989] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 05:46:43.672871 [ 5.335955] hub 3-0:1.0: USB hub found Oct 3 05:46:43.672871 [ 5.338645] hub 3-0:1.0: 1 port detected Oct 3 05:46:43.684927 [ 5.343511] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 05:46:43.684927 [ 5.350720] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 05:46:43.696867 [ 5.358830] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 05:46:43.708872 [ 5.366028] usb usb4: Product: xHCI Host Controller Oct 3 05:46:43.708872 [ 5.370878] usb usb4: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 05:46:43.720947 [ 5.376952] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 05:46:43.720947 [ 5.383025] hub 4-0:1.0: USB hub found Oct 3 05:46:43.720947 [ 5.385591] hub 4-0:1.0: 1 port detected Oct 3 05:46:43.732814 [ 5.433904] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Oct 3 05:46:43.780918 [ 5.440654] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 3 05:46:43.792873 [ 5.448458] hub 1-3:1.0: USB hub found Oct 3 05:46:43.792873 [ 5.451651] hub 1-3:1.0: 3 ports detected Oct 3 05:46:43.792873 Starting system log daemon: syslogd, klogd. Oct 3 05:46:43.928804 /var/run/utmp: No such file or directory Oct 3 05:46:45.780833 [?1h=(B   Oct 3 05:46:45.816889  Oct 3 05:46:45.828973 [  (-*) ][ Oct 03  5:46 ] Oct 3 05:46:45.840912 [  (0*start) ][ Oct 03  5:46 ] Oct 3 05:46:45.852915 [  (0*start) ][ Oct 03  5:46 ] Oct 3 05:46:45.864909 [  (0*start) ][ Oct 03  5:46 ] Oct 3 05:46:45.877054 [  (0*start) ][ Oct 03  5:46 ]                        [  (0*start) ][ Oct 03  5:46 ][  (0*start) ][ Oct 03  5:46 ] Oct 3 05:46:45.936927 [ 0- start  (2*shell) ][ Oct 03  5:46 ] Oct 3 05:46:45.948898 [ 0- start  (2*shell) ][ Oct 03  5:46 ] Oct 3 05:46:45.960894 [ 0- start  (2*shell) ][ Oct 03  5:46 ] Oct 3 05:46:45.972882 [ 0- start  (2*shell) ][ Oct 03  5:46 ]                        [ 0- start  (2*shell) ][ Oct 03  5:46 ][ 0- start  (2*shell) ][ Oct 03  5:46 ] Oct 3 05:46:46.032892 [ 0 start 2- shell  (3*shell) ][ Oct 03  5:46 ] Oct 3 05:46:46.044897 [ 0 start 2- shell  (3*shell) ][ Oct 03  5:46 ] Oct 3 05:46:46.056985 [ 0 start 2- shell  (3*shell) ][ Oct 03  5:46 ] Oct 3 05:46:46.068878 [ 0 start 2- shell  (3*shell) ][ Oct 03  5:46 ]                        [ 0 start 2- shell  (3*shell) ][ Oct 03  5:46 ][ 0 start 2- shell  (3*shell) ][ Oct 03  5:46 ] Oct 3 05:46:46.132896 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  5:46 ] Oct 3 05:46:46.144875 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  5:46 ] Oct 3 05:46:46.156887 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  5:46 ] Oct 3 05:46:46.168879 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  5:46 ]                        [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  5:46 ][ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  5:46 ] Oct 3 05:46:46.228962 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  5:46 ] Oct 3 05:46:46.240871 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  5:46 ] Oct 3 05:46:46.252973 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  5:46 ] Oct 3 05:46:46.264877 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  5:46 ]                        [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  5:46 ][ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  5:46 ] Oct 3 05:46:46.324888 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  5:46 ] Oct 3 05:46:46.336885 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  5:46 ] Oct 3 05:46:46.348864 [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  5:46 ] Oct 3 05:46:46.808865 Detecting network hardware ... 2%... 95%... 100% Oct 3 05:46:48.557727 Detecting link on eth0; please wait... ... 0%... 10%... 20% Oct 3 05:46:53.433600 Waiting for link-local address... ... 8%... 16%... 25%... 33%... 41%... 50%... 100% Oct 3 05:46:54.981759 Attempting IPv6 autoconfiguration... ... 8%... 16%... 25%... 33%... 41%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  5:47 ]... 50%... 66%... 75%... 83%... 91%... 100% Oct 3 05:47:01.053764 Configuring the network with DHCP ... 0%... 100% Oct 3 05:47:04.209791 Checking the Debian archive mirror ... 25%... 50%... 75%... 100% Oct 3 05:47:12.369703 Loading additional components ... 0%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Oct 3 05:47:45.473596 Setting up the clock ... 0%... 100% Oct 3 05:47:48.233595 Loading additional components ... 50%... 100% Oct 3 05:47:49.889580 Detecting disks and all other hardware ... 2%... 95%... 100% Oct 3 05:47:54.497591 Loading additional components ... 12%... 25%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  5:48 ]... 37%... 50%... 62%... 75%... 87%... 100% Oct 3 05:48:01.421731 Loading additional components ... 25%... 50%... 75%... 100% Oct 3 05:48:03.797618 Starting up the partitioner ... 4%... 13%... 21%... 30%... 43%... 52%... 60%... 73%... 82%... 91%... 100% Oct 3 05:48:16.937560 Guided partitioning ... 16%... 33%... 50%... 66%... 83%... 100% Oct 3 05:48:25.181630 Starting up the partitioner ... 4%... 12%... 20%... 32%... 40%... 52%... 60%... 72%... 80%... 92%... 100% Oct 3 05:48:36.041708 Partitions formatting ... 33% Oct 3 05:48:44.861706 Partitions formatting Partitions formatting [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  5:49 ] Installing the base system ... 0%... 17%... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  5:50 ]... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  5:51 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  5:52 ]... 48%... 50%...  Oct 3 05:52:42.788705  60%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  5:53 ]... 70%... 79%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  5:54 ]... 83%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  5:55 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  5:56 ]... 91%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  5:57 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  5:58 ]... 100% Oct 3 05:58:22.657588 Configuring apt ... 7%... 14%... 14%... 21%... 35%... 42%... 50%... 60%... 71%. Oct 3 05:58:59.825710 ... 82%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  5:59 ]... 92%... 100% Oct 3 05:59:02.369590 Select and install software ... 1%... 10%... 13%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  6:00 ]... 20%... 30%... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  6:01 ]... 50%... Oct 3 06:01:49.860775 . 60%... 70%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  6:02 ]... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  6:03 ]... 88%... 90%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  6:04 ]... 94%... 100% Oct 3 06:04:57.785760 [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  6:05 ] Finishing the installation ... 4%... 12%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  6:06 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  6:07 ]... 16%... 20%... 32%... 40%... 44%... Oct 3 06:07:08.713716  52%... 60%... 72%... 80%... 92% The system is going down NOW! Oct 3 06:07:18.629690 Sent SIGTERM Sent SIGKILL to all processes Oct 3 06:07:19.625729 Requesting system reboot Oct 3 06:07:19.625791 [ 1242.321079] reboot: Reó Oct 3 06:07:20.981598 Oct 3 06:07:20.981612 Oct 3 06:07:20.981650 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 06:07:20.993641 Oct 3 06:07:20.993670 CPU: Exynos5250@1000MHz Oct 3 06:07:20.993695 Oct 3 06:07:20.993716 Board: Arndale Oct 3 06:07:20.993739 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 06:07:20.993766 ready Oct 3 06:07:20.993787 DRAM: 2 GiB Oct 3 06:07:21.005695 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 06:07:21.017717 trace: enabled Oct 3 06:07:21.053580 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 06:07:21.413822 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 06:07:21.473824 In: serial Oct 3 06:07:21.473879 Out: serial Oct 3 06:07:21.473921 Err: serial Oct 3 06:07:21.473961 SCSI: ARNDALE SCSI INIT Oct 3 06:07:21.474004 Target spinup took 0 ms. Oct 3 06:07:21.485806 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 06:07:21.485868 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 06:07:21.497830 Net: Net Initialization Skipped Oct 3 06:07:21.497889 No ethernet found. Oct 3 06:07:21.497932 Hostname: arndale-westfield Oct 3 06:07:21.497975 Hit any key to stop autoboot: 2  1  0 Oct 3 06:07:23.429717 (Re)start USB... Oct 3 06:07:23.429775 USB0: USB EHCI 1.00 Oct 3 06:07:23.429819 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 06:07:29.033786 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 06:07:29.033863 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 06:07:29.477743 Waiting for Ethernet connection... done. Oct 3 06:07:31.121715 BOOTP broadcast 1 Oct 3 06:07:31.133648 BOOTP broadcast 2 Oct 3 06:07:32.273619 DHCP client bound to address 10.149.64.45 (1200 ms) Oct 3 06:07:32.285747 Using asx0 device Oct 3 06:07:32.285747 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 06:07:32.285747 Filename 'pxelinux.0'. Oct 3 06:07:32.297730 Load address: 0x43e00000 Oct 3 06:07:32.297793 Loading: *### Oct 3 06:07:32.309731 2.2 MiB/s Oct 3 06:07:32.309787 done Oct 3 06:07:32.309828 Bytes transferred = 42430 (a5be hex) Oct 3 06:07:32.309874 missing environment variable: pxeuuid Oct 3 06:07:32.321769 Retrieving file: pxelinux.cfg/0A95402D Oct 3 06:07:32.321828 Using asx0 device Oct 3 06:07:32.321871 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 06:07:32.333768 Filename 'pxelinux.cfg/0A95402D'. Oct 3 06:07:32.333828 Load address: 0x51000000 Oct 3 06:07:32.333873 Loading: *# Oct 3 06:07:32.333915 31.3 KiB/s Oct 3 06:07:32.333956 done Oct 3 06:07:32.333995 Bytes transferred = 65 (41 hex) Oct 3 06:07:32.345748 Config file found Oct 3 06:07:32.345804 Ignoring unknown command: serial Oct 3 06:07:32.345850 1: local Oct 3 06:07:32.345891 scanning bus for devices... Oct 3 06:07:32.345934 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 06:07:32.357799 Type: Hard Disk Oct 3 06:07:32.357858 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 06:07:32.369848 Found 1 device(s). Oct 3 06:07:32.369903 Oct 3 06:07:32.369942 SCSI device 0: Oct 3 06:07:32.369982 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 06:07:32.381775 Type: Hard Disk Oct 3 06:07:32.381832 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 06:07:32.381882 ... is now current device Oct 3 06:07:32.381925 Scanning scsi 0... Oct 3 06:07:32.393715 Found U-Boot script /boot.scr Oct 3 06:07:32.501754 639 bytes read in 37 ms (16.6 KiB/s) Oct 3 06:07:32.549783 ## Executing script at 50000000 Oct 3 06:07:32.549858 Loading dtbs/exynos5250-arndale.dtb Oct 3 06:07:32.549920 46686 bytes read in 1808 ms (24.4 KiB/s) Oct 3 06:07:34.313844 Loading vmlinuz-6.1.0-25-armmp-lpae Oct 3 06:07:34.313910 5509632 bytes read in 186 ms (28.2 MiB/s) Oct 3 06:07:34.517737 Loading initrd.img-6.1.0-25-armmp-lpae Oct 3 06:07:34.517796 25732061 bytes read in 1964 ms (12.5 MiB/s) Oct 3 06:07:36.417840 Booting Oct 3 06:07:36.417915 Kernel image @ 0x42000000 [ 0x000000 - 0x541200 ] Oct 3 06:07:36.429786 ## Flattened Device Tree blob at 43000000 Oct 3 06:07:36.429846 Booting using the fdt blob at 0x43000000 Oct 3 06:07:36.429892 Loading Ramdisk to 4e775000, end 4ffff3dd ... OK Oct 3 06:07:36.849733 Loading Device Tree to 4e766000, end 4e77465d ... OK Oct 3 06:07:36.849795 Oct 3 06:07:36.861734 Starting kernel ...(fake run for tracing) Oct 3 06:07:36.861795 Oct 3 06:07:36.861834 Oct 3 06:07:36.861871 Starting kernel ... Oct 3 06:07:36.861911 Oct 3 06:07:36.873704 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 06:07:43.009816 [ 0.000000] Linux version 6.1.0-25-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.106-3 (2024-08-26) Oct 3 06:07:43.021777 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=30c5387d Oct 3 06:07:43.033760 [ 0.000000] CPU: div instructions available: patching division code Oct 3 06:07:43.033825 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 06:07:43.045777 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 06:07:43.057763 [ 0.000000] Memory policy: Data cache writealloc Oct 3 06:07:43.057824 [ 0.000000] efi: UEFI not found. Oct 3 06:07:43.057870 [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000 Oct 3 06:07:43.069779 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 06:07:43.069840 [ 0.000000] Zone ranges: Oct 3 06:07:43.069884 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 06:07:43.081759 [ 0.000000] Normal empty Oct 3 06:07:43.081818 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 06:07:43.081868 [ 0.000000] Movable zone start for each node Oct 3 06:07:43.093767 [ 0.000000] Early memory node ranges Oct 3 06:07:43.093827 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 06:07:43.105749 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 06:07:43.105815 [ 0.000000] percpu: Embedded 18 pages/cpu s44820 r8192 d20716 u73728 Oct 3 06:07:43.117759 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 06:07:43.117825 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=ttySAC2,115200n8 Oct 3 06:07:43.129771 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 06:07:43.141743 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 06:07:43.141780 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 06:07:43.153814 [ 0.000000] Memory: 2015504K/2097152K available (12288K kernel code, 1717K rwdata, 3748K rodata, 2048K init, 383K bss, 65264K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 06:07:43.165778 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 06:07:43.177719 [ 0.000000] ftrace: allocating 39996 entries in 118 pages Oct 3 06:07:43.177753 [ 0.000000] ftrace: allocated 118 pages with 5 groups Oct 3 06:07:43.189770 [ 0.000000] trace event string verifier disabled Oct 3 06:07:43.189830 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 06:07:43.201764 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 06:07:43.201830 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 06:07:43.201878 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 06:07:43.213755 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 06:07:43.213823 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 06:07:43.225772 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 06:07:43.237811 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 06:07:43.237874 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 06:07:43.237926 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 06:07:43.249768 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 06:07:43.249831 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 06:07:43.261780 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 06:07:43.273764 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 06:07:43.285658 [ 0.002624] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 06:07:43.285694 [ 0.002638] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 06:07:43.297767 [ 0.002653] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 06:07:43.309758 [ 0.002664] Ignoring duplicate/late registration of read_current_timer delay Oct 3 06:07:43.309824 [ 0.003029] Console: colour dummy device 80x30 Oct 3 06:07:43.321644 [ 0.003070] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 06:07:43.321687 [ 0.003083] CPU: Testing write buffer coherency: ok Oct 3 06:07:43.333770 [ 0.003126] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 06:07:43.345649 [ 0.003133] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 06:07:43.345684 [ 0.003140] pid_max: default: 32768 minimum: 301 Oct 3 06:07:43.345711 [ 0.003508] LSM: Security Framework initializing Oct 3 06:07:43.357760 [ 0.003580] landlock: Up and running. Oct 3 06:07:43.357818 [ 0.003584] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 06:07:43.369766 [ 0.003773] AppArmor: AppArmor initialized Oct 3 06:07:43.369826 [ 0.003786] TOMOYO Linux initialized Oct 3 06:07:43.369871 [ 0.003831] LSM support for eBPF active Oct 3 06:07:43.381770 [ 0.004080] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 06:07:43.381808 [ 0.004093] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 06:07:43.393784 [ 0.005505] /cpus/cpu@0 missing clock-frequency property Oct 3 06:07:43.393845 [ 0.005533] /cpus/cpu@1 missing clock-frequency property Oct 3 06:07:43.405692 [ 0.005546] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 06:07:43.405726 [ 0.006494] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 06:07:43.417707 [ 0.006500] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 06:07:43.417741 [ 0.006601] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 06:07:43.429793 [ 0.006607] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 06:07:43.429858 [ 0.006747] Setting up static identity map for 0x40400000 - 0x404000ac Oct 3 06:07:43.441770 [ 0.007906] rcu: Hierarchical SRCU implementation. Oct 3 06:07:43.441831 [ 0.007912] rcu: Max phase no-delay instances is 1000. Oct 3 06:07:43.453772 [ 0.010042] EFI services will not be available. Oct 3 06:07:43.453805 [ 0.010392] smp: Bringing up secondary CPUs ... Oct 3 06:07:43.465746 [ 0.011134] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 06:07:43.465809 [ 0.011146] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 06:07:43.477767 [ 0.011279] smp: Brought up 1 node, 2 CPUs Oct 3 06:07:43.477827 [ 0.011288] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 06:07:43.489761 [ 0.011295] CPU: All CPU(s) started in HYP mode. Oct 3 06:07:43.489823 [ 0.011299] CPU: Virtualization extensions available. Oct 3 06:07:43.501702 [ 0.012157] devtmpfs: initialized Oct 3 06:07:43.501734 [ 0.023145] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 06:07:43.501765 [ 0.023376] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 06:07:43.513781 [ 0.023400] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 06:07:43.525756 [ 0.023913] pinctrl core: initialized pinctrl subsystem Oct 3 06:07:43.525818 [ 0.024664] DMI not present or invalid. Oct 3 06:07:43.537654 [ 0.025343] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 06:07:43.537689 [ 0.026888] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 06:07:43.549689 [ 0.028404] audit: initializing netlink subsys (disabled) Oct 3 06:07:43.549725 [ 0.028608] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 Oct 3 06:07:43.561736 [ 0.029790] thermal_sys: Registered thermal governor 'fair_share' Oct 3 06:07:43.561809 [ 0.029797] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 06:07:43.573753 [ 0.029802] thermal_sys: Registered thermal governor 'step_wise' Oct 3 06:07:43.573816 [ 0.029807] thermal_sys: Registered thermal governor 'user_space' Oct 3 06:07:43.585709 [ 0.029811] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 06:07:43.585744 [ 0.030012] No ATAGs? Oct 3 06:07:43.585768 [ 0.030080] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 06:07:43.597784 [ 0.030089] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 06:07:43.609751 [ 0.031173] Serial: AMBA PL011 UART driver Oct 3 06:07:43.609818 [ 0.080569] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 06:07:43.621763 [ 0.087513] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 06:07:43.621834 [ 0.091839] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages Oct 3 06:07:43.633770 [ 0.091847] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page Oct 3 06:07:43.633834 [ 0.098994] iommu: Default domain type: Translated Oct 3 06:07:43.645757 [ 0.099002] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 06:07:43.645826 [ 0.099969] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 06:07:43.657662 [ 0.100484] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 06:07:43.657696 [ 0.100495] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 06:07:43.669657 [ 0.101032] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 06:07:43.669696 [ 0.101064] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 06:07:43.681819 [ 0.101288] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 06:07:43.693764 [ 0.101776] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 06:07:43.693852 [ 0.101787] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 06:07:43.705750 [ 0.102164] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 06:07:43.705796 [ 0.102452] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 06:07:43.705840 [ 0.102462] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 06:07:43.717734 [ 0.102773] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 06:07:43.717789 [ 0.102872] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 06:07:43.729745 [ 0.102881] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 06:07:43.729816 [ 0.103061] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 06:07:43.741741 [ 0.103306] pps_core: LinuxPPS API ver. 1 registered Oct 3 06:07:43.741803 [ 0.103311] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 06:07:43.753755 [ 0.103329] PTP clock support registered Oct 3 06:07:43.753819 [ 0.104879] NetLabel: Initializing Oct 3 06:07:43.753858 [ 0.104885] NetLabel: domain hash size = 128 Oct 3 06:07:43.765757 [ 0.104890] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 06:07:43.765821 [ 0.104944] NetLabel: unlabeled traffic allowed by default Oct 3 06:07:43.777759 [ 0.105115] vgaarb: loaded Oct 3 06:07:43.777817 [ 0.105652] clocksource: Switched to clocksource mct-frc Oct 3 06:07:43.777866 [ 0.106214] VFS: Disk quotas dquot_6.6.0 Oct 3 06:07:43.789724 [ 0.106298] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 06:07:43.789788 [ 0.107064] AppArmor: AppArmor Filesystem Enabled Oct 3 06:07:43.801724 [ 0.116963] NET: Registered PF_INET protocol family Oct 3 06:07:43.801778 [ 0.117156] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 06:07:43.813741 [ 0.118815] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 06:07:43.813803 [ 0.118914] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 06:07:43.825749 [ 0.118940] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 06:07:43.837730 [ 0.119039] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 06:07:43.837790 [ 0.119270] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 06:07:43.849736 [ 0.119508] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 06:07:43.849803 [ 0.119600] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 06:07:43.861763 [ 0.119641] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 06:07:43.873755 [ 0.119871] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 06:07:43.873819 [ 0.119909] NET: Registered PF_XDP protocol family Oct 3 06:07:43.873866 [ 0.119920] PCI: CLS 0 bytes, default 64 Oct 3 06:07:43.885760 [ 0.120410] Trying to unpack rootfs image as initramfs... Oct 3 06:07:43.885823 [ 0.120763] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 06:07:43.897756 [ 0.126163] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 06:07:43.909722 [ 0.193612] Initialise system trusted keyrings Oct 3 06:07:43.909790 [ 0.193759] Key type blacklist registered Oct 3 06:07:43.909837 [ 0.194984] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 06:07:43.921767 [ 0.202934] zbud: loaded Oct 3 06:07:43.921824 [ 0.204233] integrity: Platform Keyring initialized Oct 3 06:07:43.921872 [ 0.204267] integrity: Machine keyring initialized Oct 3 06:07:43.933754 [ 0.204275] Key type asymmetric registered Oct 3 06:07:43.933813 [ 0.204284] Asymmetric key parser 'x509' registered Oct 3 06:07:43.945756 [ 1.423015] Freeing initrd memory: 25132K Oct 3 06:07:43.945816 [ 1.445126] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 06:07:43.945868 [ 1.445391] bounce: pool size: 64 pages Oct 3 06:07:43.957776 [ 1.445570] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 06:07:43.957847 [ 1.445774] io scheduler mq-deadline registered Oct 3 06:07:43.969713 [ 1.450923] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 06:07:43.969752 [ 1.471900] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 06:07:43.981766 [ 1.471912] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 06:07:43.993761 [ 1.474247] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 06:07:43.993829 [ 1.474258] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 06:07:44.005781 [ 1.475052] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 06:07:44.017759 [ 1.475061] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 06:07:44.029747 [ 1.475892] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 06:07:44.029825 [ 1.475901] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 06:07:44.041758 [ 1.478251] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 06:07:44.053646 [ 1.481061] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 06:07:44.053681 [ 1.483829] Serial: AMBA driver Oct 3 06:07:44.053705 [ 1.484054] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 06:07:44.065782 [ 1.484524] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 06:07:44.077774 [ 1.485010] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 06:07:44.089772 [ 2.565732] printk: console [ttySAC2] enabled Oct 3 06:07:44.089838 [ 2.570544] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 06:07:44.101741 [ 2.581202] STM32 USART driver initialized Oct 3 06:07:44.101799 [ 2.595569] mousedev: PS/2 mouse device common for all mice Oct 3 06:07:44.125648 [ 2.626869] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 06:07:44.149700 [ 2.635506] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T06:07:45 UTC (1727935665) Oct 3 06:07:44.161768 [ 2.645333] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 06:07:44.173738 [ 2.652769] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 06:07:44.173802 [ 2.660766] NET: Registered PF_INET6 protocol family Oct 3 06:07:44.185711 [ 2.684941] Segment Routing with IPv6 Oct 3 06:07:44.209765 [ 2.687210] In-situ OAM (IOAM) with IPv6 Oct 3 06:07:44.209831 [ 2.691144] mip6: Mobile IPv6 Oct 3 06:07:44.209876 [ 2.694017] NET: Registered PF_PACKET protocol family Oct 3 06:07:44.221748 [ 2.699163] mpls_gso: MPLS GSO support Oct 3 06:07:44.221807 [ 2.703214] ThumbEE CPU extension supported. Oct 3 06:07:44.221854 [ 2.707043] Registering SWP/SWPB emulation handler Oct 3 06:07:44.233707 [ 2.712286] registered taskstats version 1 Oct 3 06:07:44.233740 [ 2.715908] Loading compiled-in X.509 certificates Oct 3 06:07:44.245688 [ 3.176048] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 06:07:44.701831 [ 3.183391] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 06:07:44.713772 [ 3.194442] zswap: loaded using pool lzo/zbud Oct 3 06:07:44.713830 [ 3.198405] Key type .fscrypt registered Oct 3 06:07:44.725719 [ 3.201700] Key type fscrypt-provisioning registered Oct 3 06:07:44.725780 [ 3.225934] Key type encrypted registered Oct 3 06:07:44.749788 [ 3.228484] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 06:07:44.749858 [ 3.234022] ima: No TPM chip found, activating TPM-bypass! Oct 3 06:07:44.761807 [ 3.239470] ima: Allocated hash algorithm: sha256 Oct 3 06:07:44.761869 [ 3.244175] ima: No architecture policies found Oct 3 06:07:44.773750 [ 3.248691] evm: Initialising EVM extended attributes: Oct 3 06:07:44.773812 [ 3.253760] evm: security.selinux Oct 3 06:07:44.773858 [ 3.257032] evm: security.SMACK64 (disabled) Oct 3 06:07:44.785785 [ 3.261306] evm: security.SMACK64EXEC (disabled) Oct 3 06:07:44.785872 [ 3.265901] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 06:07:44.785923 [ 3.270934] evm: security.SMACK64MMAP (disabled) Oct 3 06:07:44.797768 [ 3.275534] evm: security.apparmor Oct 3 06:07:44.797827 [ 3.278919] evm: security.ima Oct 3 06:07:44.797871 [ 3.281870] evm: security.capability Oct 3 06:07:44.812952 [ 3.285415] evm: HMAC attrs: 0x1 Oct 3 06:07:44.812973 [ 3.872963] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 06:07:45.398104 [ 3.878936] clk: Disabling unused clocks Oct 3 06:07:45.409724 [ 3.891790] Freeing unused kernel image (initmem) memory: 2048K Oct 3 06:07:45.421818 [ 3.896658] Checked W+X mappings: passed, no W+X pages found Oct 3 06:07:45.421908 [ 3.901911] Run /init as init process Oct 3 06:07:45.433715 Loading, please wait... Oct 3 06:07:45.457681 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 06:07:45.541740 [ 4.841029] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 06:07:46.369716 [ 4.852730] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 06:07:46.381632 [ 4.879846] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 06:07:46.405630 [ 4.891505] usbcore: registered new interface driver usbfs Oct 3 06:07:46.417689 [ 4.895875] usbcore: registered new interface driver hub Oct 3 06:07:46.429718 [ 4.908465] Synopsys Designware Multimedia Card Interface Driver Oct 3 06:07:46.441735 [ 4.935480] usbcore: registered new device driver usb Oct 3 06:07:46.465740 [ 4.935638] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 06:07:46.465776 [ 4.946382] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 06:07:46.477760 [ 4.947341] SCSI subsystem initialized Oct 3 06:07:46.477821 [ 4.961521] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 06:07:46.489695 [ 4.966534] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 06:07:46.489729 [ 4.972914] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 06:07:46.501787 [ 4.975530] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo Oct 3 06:07:46.513758 [ 4.986501] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 06:07:46.513797 [ 4.992844] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 06:07:46.525677 [ 5.040715] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo Oct 3 06:07:46.573694 [ 5.053293] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 06:07:46.585608 [ 5.110727] mmc_host mmc1: card is polling. Oct 3 06:07:46.633748 [ 5.125865] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 06:07:46.657692 [ 5.155735] phy phy-12130000.phy.1: phy_power_on was called before phy_init Oct 3 06:07:46.681731 [ 5.166997] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 06:07:46.693758 [ 5.179085] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 06:07:46.705659 [ 5.193299] phy phy-12130000.phy.1: phy_power_on was called before phy_init Oct 3 06:07:46.717713 [ 5.208577] mmc0: new high speed SDHC card at address aaaa Oct 3 06:07:46.741749 [ 5.213686] exynos-ohci 12120000.usb: USB Host Controller Oct 3 06:07:46.741813 [ 5.223822] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Oct 3 06:07:46.753808 [ 5.235998] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Oct 3 06:07:46.765740 [ 5.243114] mmcblk0: mmc0:aaaa SU04G 3.69 GiB Oct 3 06:07:46.765800 [ 5.249499] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 06:07:46.777739 [ 5.258314] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 06:07:46.789795 [ 5.264395] exynos-ehci 12110000.usb: irq 109, io mem 0x12110000 Oct 3 06:07:46.789857 [ 5.264774] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 06:07:46.801780 [ 5.277873] exynos-ohci 12120000.usb: irq 109, io mem 0x12120000 Oct 3 06:07:46.801842 [ 5.283971] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 06:07:46.813781 [ 5.290785] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Oct 3 06:07:46.825767 [ 5.293836] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 06:07:46.825829 [ 5.299610] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 06:07:46.837795 [ 5.305983] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 06:07:46.849772 [ 5.322960] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 06:07:46.849839 [ 5.330164] usb usb2: Product: EHCI Host Controller Oct 3 06:07:46.861776 [ 5.335018] usb usb2: Manufacturer: Linux 6.1.0-25-armmp-lpae ehci_hcd Oct 3 06:07:46.861841 [ 5.341522] usb usb2: SerialNumber: 12110000.usb Oct 3 06:07:46.873750 [ 5.352882] scsi host0: ahci-dwc Oct 3 06:07:46.873808 [ 5.355133] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 110 Oct 3 06:07:46.885729 [ 5.363997] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 06:07:46.897738 [ 5.383103] mmc1: new DDR MMC card at address 0001 Oct 3 06:07:46.909760 [ 5.391223] mmcblk1: mmc1:0001 M4G1FB 3.64 GiB Oct 3 06:07:46.921696 [ 5.402054] hub 2-0:1.0: USB hub found Oct 3 06:07:46.933781 [ 5.404389] hub 2-0:1.0: 3 ports detected Oct 3 06:07:46.933842 [ 5.409368] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 06:07:46.945620 [ 5.416641] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 06:07:46.945794 [ 5.423822] usb usb1: Product: USB Host Controller Oct 3 06:07:46.957788 [ 5.428562] usb usb1: Manufacturer: Linux 6.1.0-25-armmp-lpae ohci_hcd Oct 3 06:07:46.957859 [ 5.435071] usb usb1: SerialNumber: 12120000.usb Oct 3 06:07:46.957906 [ 5.439744] mmcblk1: p1 p2 p3 p4 Oct 3 06:07:46.969716 [ 5.441035] hub 1-0:1.0: USB hub found Oct 3 06:07:46.969748 [ 5.446885] hub 1-0:1.0: 3 ports detected Oct 3 06:07:46.969773 [ 5.457479] mmcblk1boot0: mmc1:0001 M4G1FB 1.00 MiB Oct 3 06:07:46.981741 [ 5.466789] mmcblk1boot1: mmc1:0001 M4G1FB 1.00 MiB Oct 3 06:07:46.993751 [ 5.474253] mmcblk1rpmb: mmc1:0001 M4G1FB 128 KiB, chardev (241:0) Oct 3 06:07:47.005707 [ 5.668077] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 06:07:47.201742 [ 5.741520] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 06:07:47.273750 [ 5.841726] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 06:07:47.369784 [ 5.847342] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 06:07:47.381778 [ 5.853175] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 06:07:47.381843 [ 5.859693] I/O error, dev mmcblk0, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:07:47.393739 [ 5.869815] ata1.00: configured for UDMA/133 Oct 3 06:07:47.393771 [ 5.873601] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 06:07:47.405691 [ 5.940720] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 06:07:47.465814 [ 5.944794] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 06:07:47.477773 [ 5.952968] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 06:07:47.489723 [ 5.961817] xhci-hcd xhci-hcd.2.auto: irq 111, io mem 0x12000000 Oct 3 06:07:47.489777 [ 5.968766] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 06:07:47.501773 [ 5.973310] I/O error, dev mmcblk0, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:07:47.501846 [ 5.982569] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 06:07:47.513801 [ 5.990165] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 06:07:47.525774 [ 5.996826] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 06:07:47.525846 [ 6.004921] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 06:07:47.537734 [ 6.012114] usb usb3: Product: xHCI Host Controller Oct 3 06:07:47.537766 [ 6.016970] usb usb3: Manufacturer: Linux 6.1.0-25-armmp-lpae xhci-hcd Oct 3 06:07:47.549732 [ 6.023480] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 06:07:47.549804 [ 6.028970] hub 3-0:1.0: USB hub found Oct 3 06:07:47.549850 [ 6.032111] hub 3-0:1.0: 1 port detected Oct 3 06:07:47.561788 [ 6.036520] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 06:07:47.561857 [ 6.044208] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 06:07:47.573799 [ 6.052313] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 06:07:47.585795 [ 6.059514] usb usb4: Product: xHCI Host Controller Oct 3 06:07:47.585855 [ 6.064394] usb usb4: Manufacturer: Linux 6.1.0-25-armmp-lpae xhci-hcd Oct 3 06:07:47.597773 [ 6.070876] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 06:07:47.597834 [ 6.077642] hub 4-0:1.0: USB hub found Oct 3 06:07:47.597880 [ 6.080013] hub 4-0:1.0: 1 port detected Oct 3 06:07:47.609736 [ 6.083970] I/O error, dev mmcblk0, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:07:47.621693 [ 6.140072] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 06:07:47.669791 [ 6.146142] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 06:07:47.669851 [ 6.152231] sd 0:0:0:0: [sda] Write Protect is off Oct 3 06:07:47.681762 [ 6.158051] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 06:07:47.693715 [ 6.165807] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 06:07:47.693779 [ 6.193278] I/O error, dev mmcblk0, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:07:47.729761 [ 6.201179] sda: sda1 sda2 < sda5 > Oct 3 06:07:47.729819 [ 6.207085] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 06:07:47.729867 [ 6.301242] I/O error, dev mmcblk0, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:07:47.837713 [ 6.409233] I/O error, dev mmcblk0, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:07:47.945697 [ 6.517207] I/O error, dev mmcblk0, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:07:48.053718 [ 6.625191] I/O error, dev mmcblk0, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:07:48.161673 [ 7.033711] I/O error, dev mmcblk0, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 06:07:48.569685 [ 7.141309] I/O error, dev mmcblk0, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 06:07:48.677692 [ 7.185676] random: crng init done Oct 3 06:07:48.713734 [ 7.294626] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. Oct 3 06:07:48.833790 [ 7.305536] device-mapper: uevent: version 1.0.3 Oct 3 06:07:48.833851 [ 7.310205] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Oct 3 06:07:48.845750 [ 7.749403] Buffer I/O error on dev mmcblk0, logical block 968056, async page read Oct 3 06:07:49.277742 Begin: Loading essential drivers ... done. Oct 3 06:07:49.493667 Begin: Running /scripts/init-premount ... done. Oct 3 06:07:52.505810 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 06:07:52.505889 Begin: Running /scripts/local-premount ... done. Oct 3 06:07:52.553712 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 06:07:52.589648 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 06:07:52.685617 /dev/mapper/arndale--westfield--vg-root: clean, 39343/1220608 files, 378254/4882432 blocks Oct 3 06:07:52.889619 done. Oct 3 06:07:52.901612 [ 11.498103] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 06:07:53.021770 [ 11.690007] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 06:07:53.225708 done. Oct 3 06:07:53.225761 Begin: Running /scripts/local-bottom ... done. Oct 3 06:07:53.261751 Begin: Running /scripts/init-bottom ... done. Oct 3 06:07:53.309711 [ 12.003174] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. Oct 3 06:07:53.537720 INIT: version 3.06 booting Oct 3 06:07:53.873713 INIT: No inittab.d directory found Oct 3 06:07:53.957706 Using makefile-style concurrent boot in runlevel S. Oct 3 06:07:54.269688 Starting hotplug events dispatcher: systemd-udevd. Oct 3 06:07:55.913772 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 06:07:56.153773 Synthesizing the initial hotplug events (devices)...done. Oct 3 06:07:56.661863 Waiting for /dev to be fully populated...[ 15.358742] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 06:07:56.889854 [ 15.368662] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Oct 3 06:07:56.889925 [ 15.523491] sd 0:0:0:0: Attached scsi generic sg0 type 0 Oct 3 06:07:57.045852 [ 15.565636] panfrost 11800000.gpu: clock rate = 533000000 Oct 3 06:07:57.093675 [ 15.594297] panfrost 11800000.gpu: mali-t600 id 0x600 major 0x0 minor 0x0 status 0x1 Oct 3 06:07:57.117877 [ 15.600656] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,31b4dfff Oct 3 06:07:57.129919 [ 15.608793] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 Oct 3 06:07:57.141734 [ 15.620485] panfrost 11800000.gpu: shader_present=0xf l2_present=0x1 Oct 3 06:07:57.141768 [ 15.673701] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 06:07:57.201782 [ 15.730924] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 0 Oct 3 06:07:57.261881 [ 15.746090] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 06:07:57.273857 [ 15.762994] usb3503 usb-hub: switched to HUB mode Oct 3 06:07:57.285876 [ 15.766264] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 06:07:57.297796 [ 15.856636] blk_print_req_error: 6 callbacks suppressed Oct 3 06:07:57.381807 [ 15.856686] I/O error, dev mmcblk0, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:07:57.393713 [ 15.975023] I/O error, dev mmcblk0, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:07:57.501769 [ 16.083249] I/O error, dev mmcblk0, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:07:57.609835 [ 16.091297] usb 2-3: new high-speed USB device number 2 using exynos-ehci Oct 3 06:07:57.626980 [ 16.191447] I/O error, dev mmcblk0, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:07:57.717754 [ 16.227738] OF: graph: no port node found in /soc/hdmi@14530000 Oct 3 06:07:57.753739 [ 16.254905] usb 2-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Oct 3 06:07:57.777783 [ 16.261912] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 3 06:07:57.789686 [ 16.287870] hub 2-3:1.0: USB hub found Oct 3 06:07:57.813736 [ 16.290576] hub 2-3:1.0: 3 ports detected Oct 3 06:07:57.813795 [ 16.301600] I/O error, dev mmcblk0, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:07:57.825767 [ 16.409883] I/O error, dev mmcblk0, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:07:57.933767 [ 16.521739] I/O error, dev mmcblk0, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:07:58.053712 [ 16.589724] usb 2-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 06:07:58.113762 [ 16.629812] I/O error, dev mmcblk0, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:07:58.161716 [ 16.719596] usb 2-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=77.32 Oct 3 06:07:58.245783 [ 16.726752] usb 2-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Oct 3 06:07:58.257738 [ 16.734084] usb 2-3.2: Product: USB2.0 Hub Oct 3 06:07:58.257797 [ 16.742069] hub 2-3.2:1.0: USB hub found Oct 3 06:07:58.272905 [ 16.745119] hub 2-3.2:1.0: 4 ports detected Oct 3 06:07:58.272905 [ 17.039007] I/O error, dev mmcblk0, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 06:07:58.572902 [ 17.053973] usb 2-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 06:07:58.584893 [ 17.147177] I/O error, dev mmcblk0, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 06:07:58.680897 [ 17.168302] usb 2-3.2.4: New USB device found, idVendor=0b95, idProduct=772a, bcdDevice= 0.01 Oct 3 06:07:58.692944 [ 17.175699] usb 2-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Oct 3 06:07:58.704944 [ 17.183071] usb 2-3.2.4: Product: AX88772 Oct 3 06:07:58.704944 [ 17.187252] usb 2-3.2.4: Manufacturer: ASIX Elec. Corp. Oct 3 06:07:58.716926 [ 17.192320] usb 2-3.2.4: SerialNumber: 000001 Oct 3 06:07:58.716926 [ 17.650904] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 06:07:59.176932 [ 17.756772] Buffer I/O error on dev mmcblk0, logical block 968056, async page read Oct 3 06:07:59.284926 [ 18.352396] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 06:07:59.889091 [ 18.367937] Asix Electronics AX88772A usb-002:004:10: attached PHY driver (mii_bus:phy_addr=usb-002:004:10, irq=POLL) Oct 3 06:07:59.900927 [ 18.381782] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 66:cf:20:fb:6d:d3 Oct 3 06:07:59.912939 [ 18.394269] usbcore: registered new interface driver asix Oct 3 06:07:59.924895 done. Oct 3 06:08:00.188975 [ 19.160893] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 06:08:00.685076 Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). Oct 3 06:08:00.721055 Checking file systems.../dev/sda1: clean, 922/61056 files, 25401/243968 blocks Oct 3 06:08:02.364873 done. Oct 3 06:08:02.400870 Cleaning up temporary files... /tmp. Oct 3 06:08:02.700976 [ 21.407470] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 06:08:02.940873 [ 21.456273] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 06:08:02.988885 [ 21.678680] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k FS Oct 3 06:08:03.216863 Mounting local filesystems...done. Oct 3 06:08:03.576905 Activating swapfile swap, if any...done. Oct 3 06:08:03.588846 Cleaning up temporary files.... Oct 3 06:08:03.625004 Starting Setting kernel variables: sysctl. Oct 3 06:08:03.861780 [ 22.913210] audit: type=1400 audit(1727935685.564:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=895 comm="apparmor_parser" Oct 3 06:08:04.449821 [ 22.927194] audit: type=1400 audit(1727935685.568:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=895 comm="apparmor_parser" Oct 3 06:08:04.461774 [ 22.942902] audit: type=1400 audit(1727935685.576:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=894 comm="apparmor_parser" Oct 3 06:08:04.473747 [ 22.980302] asix 2-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 06:08:04.509705 [ 23.288128] audit: type=1400 audit(1727935685.940:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=937 comm="apparmor_parser" Oct 3 06:08:04.821786 [ 23.302351] audit: type=1400 audit(1727935685.944:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=937 comm="apparmor_parser" Oct 3 06:08:04.833755 [ 23.316585] audit: type=1400 audit(1727935685.944:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=937 comm="apparmor_parser" Oct 3 06:08:04.845784 [ 23.607129] audit: type=1400 audit(1727935686.260:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=936 comm="apparmor_parser" Oct 3 06:08:05.145717 [ 23.637083] audit: type=1400 audit(1727935686.280:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=936 comm="apparmor_parser" Oct 3 06:08:05.169779 [ 23.652934] audit: type=1400 audit(1727935686.284:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=936 comm="apparmor_parser" Oct 3 06:08:05.193754 [ 23.670468] audit: type=1400 audit(1727935686.316:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=942 comm="apparmor_parser" Oct 3 06:08:05.205758 Starting: AppArmorLoading AppArmor profiles...done. Oct 3 06:08:05.205817 . Oct 3 06:08:05.205856 [ 25.126990] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 06:08:06.657731 [ 25.155002] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 3 06:08:06.681721 Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1 Oct 3 06:08:08.476934 Copyright 2004-2022 Internet Systems Consortium. Oct 3 06:08:08.476934 All rights reserved. Oct 3 06:08:08.476934 For info, please visit https://www.isc.org/software/dhcp/ Oct 3 06:08:08.488938 Oct 3 06:08:08.488938 Listening on LPF/eth0/a6:46:13:77:e8:2f Oct 3 06:08:08.488938 Sending on LPF/eth0/a6:46:13:77:e8:2f Oct 3 06:08:08.488938 Sending on Socket/fallback Oct 3 06:08:08.500936 Created duid "\000\001\000\001.\220\361E\246F\023w\350/". Oct 3 06:08:08.500936 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 Oct 3 06:08:08.500936 [ 28.640962] exynos4-fb 14400000.fimd: deferred probe timeout, ignoring dependency Oct 3 06:08:10.172914 [ 28.651812] exynos-mixer 14450000.mixer: deferred probe timeout, ignoring dependency Oct 3 06:08:10.184918 [ 28.659575] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations Oct 3 06:08:10.184918 [ 28.665957] exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm]) Oct 3 06:08:10.196942 [ 28.674548] exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm]) Oct 3 06:08:10.208930 [ 28.684031] exynos-drm exynos-drm: bound 14500000.dsi (ops hdmi_enable [exynosdrm]) Oct 3 06:08:10.208930 [ 28.690891] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm]) Oct 3 06:08:10.220916 [ 28.703148] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 06:08:10.233056 [ 28.715189] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 06:08:10.244940 [ 28.722690] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 Oct 3 06:08:10.256866 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 Oct 3 06:09:05.693785 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 Oct 3 06:09:05.693785 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 Oct 3 06:09:05.693866 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 Oct 3 06:09:05.705724 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 16 Oct 3 06:09:05.705769 No DHCPOFFERS received. Oct 3 06:09:05.717705 No working leases in persistent database - sleeping. Oct 3 06:09:05.717768 done. Oct 3 06:09:05.717809 Cleaning up temporary files.... Oct 3 06:09:05.729693 Starting nftables: none Oct 3 06:09:05.825768 . Oct 3 06:09:06.246405 INIT: Entering runlevel: 2 Oct 3 06:09:06.308782 Using makefile-style concurrent boot in runlevel 2. Oct 3 06:09:06.356659 Starting Apache httpd web server: apache2AH00557: apache2: apr_sockaddr_info_get() failed for arndale-westfield Oct 3 06:09:07.272863 AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1. Set the 'ServerName' directive globally to suppress this message Oct 3 06:09:07.282569 . Oct 3 06:09:08.400725 Starting periodic command scheduler: cron. Oct 3 06:09:08.848654 Starting NTP server: ntpd2024-10-03T06:09:09 ntpd[1121]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 06:09:08.860721 2024-10-03T06:09:09 ntpd[1121]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 06:09:08.872811 . Oct 3 06:09:08.872811 Starting system message bus: dbus. Oct 3 06:09:09.232812 Starting OpenBSD Secure Shell server: sshd. Oct 3 06:09:09.649946 Oct 3 06:09:10.693782 Debian GNU/Linux 12 arndale-westfield ttySAC2 Oct 3 06:09:10.705773 Oct 3 06:09:10.705773 arndale-westfield login: [ 122.471488] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 06:09:44.001625 [ 123.491040] asix 2-3.2.4:1.0 eth0: Link is Down Oct 3 06:09:45.021718 [ 127.655204] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 06:09:49.185684 [ 338.663237] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 06:13:20.189721 [ 455.463355] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 06:15:16.984856 [ 465.767331] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 06:15:27.293662 [ 585.641601] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 06:17:27.165818 [ 960.487317] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 06:23:42.009804 [ 961.507150] asix 2-3.2.4:1.0 eth0: Link is Down Oct 3 06:23:43.029721 [ 972.839344] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 06:23:54.361720 [ 980.104318] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 06:24:01.621756 [ 1117.383369] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 06:26:18.901948 Oct 3 06:27:36.161668 Oct 3 06:27:36.177782 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 06:27:36.177919 Oct 3 06:27:36.177962 CPU: Exynos5250@1000MHz Oct 3 06:27:36.178006 Oct 3 06:27:36.178044 Board: Arndale Oct 3 06:27:36.178085 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 06:27:36.185671 ready Oct 3 06:27:36.185724 DRAM: 2 GiB Oct 3 06:27:36.185783 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 06:27:36.197641 trace: enabled Oct 3 06:27:36.233657 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 06:27:36.593728 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 06:27:36.653731 In: serial Oct 3 06:27:36.653786 Out: serial Oct 3 06:27:36.653828 Err: serial Oct 3 06:27:36.653868 SCSI: ARNDALE SCSI INIT Oct 3 06:27:36.665723 Target spinup took 0 ms. Oct 3 06:27:36.665780 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 06:27:36.677777 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 06:27:36.677840 Net: Net Initialization Skipped Oct 3 06:27:36.677885 No ethernet found. Oct 3 06:27:36.677926 Hostname: arndale-westfield Oct 3 06:27:36.689691 Hit any key to stop autoboot: 2  1  0 Oct 3 06:27:38.605732 (Re)start USB... Oct 3 06:27:38.605807 USB0: USB EHCI 1.00 Oct 3 06:27:38.617701 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 06:27:44.205782 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 06:27:44.217739 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 06:27:44.661816 Waiting for Ethernet connection... done. Oct 3 06:27:46.257752 BOOTP broadcast 1 Oct 3 06:27:46.257843 BOOTP broadcast 2 Oct 3 06:27:48.777771 DHCP client bound to address 10.149.64.45 (2629 ms) Oct 3 06:27:48.789760 Using asx0 device Oct 3 06:27:48.789816 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 06:27:48.789867 Filename 'pxelinux.0'. Oct 3 06:27:48.789910 Load address: 0x43e00000 Oct 3 06:27:48.801711 Loading: *### Oct 3 06:27:48.813786 2.4 MiB/s Oct 3 06:27:48.813833 done Oct 3 06:27:48.813874 Bytes transferred = 42430 (a5be hex) Oct 3 06:27:48.813920 missing environment variable: pxeuuid Oct 3 06:27:48.825770 Retrieving file: pxelinux.cfg/0A95402D Oct 3 06:27:48.825830 Using asx0 device Oct 3 06:27:48.825873 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 06:27:48.825922 Filename 'pxelinux.cfg/0A95402D'. Oct 3 06:27:48.837765 Load address: 0x51000000 Oct 3 06:27:48.837822 Loading: *# Oct 3 06:27:48.837864 355.5 KiB/s Oct 3 06:27:48.837906 done Oct 3 06:27:48.837945 Bytes transferred = 728 (2d8 hex) Oct 3 06:27:48.837989 Config file found Oct 3 06:27:48.849775 Ignoring unknown command: serial Oct 3 06:27:48.849834 1: ^Overwrite Oct 3 06:27:48.849877 Retrieving file: /osstest/tmp//arndale-westfield--initrd.gz Oct 3 06:27:48.849925 Using asx0 device Oct 3 06:27:48.861751 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 06:27:48.861815 Filename '/osstest/tmp//arndale-westfield--initrd.gz'. Oct 3 06:27:48.861865 Load address: 0x43300000 Oct 3 06:27:48.873689 Loading: *################################################################# Oct 3 06:27:49.197718 ################################################################# Oct 3 06:27:49.509687 ################################################################# Oct 3 06:27:49.833765 ################################################################# Oct 3 06:27:50.169812 ################################################################# Oct 3 06:27:50.493826 ################################################################# Oct 3 06:27:50.817723 ################################################################# Oct 3 06:27:51.141710 ################################################################# Oct 3 06:27:51.465678 ################################################################# Oct 3 06:27:51.789738 ################################################################# Oct 3 06:27:52.113612 ################################################################# Oct 3 06:27:52.437732 ################################################################# Oct 3 06:27:52.764801 ################################################################# Oct 3 06:27:53.097642 ################################################################# Oct 3 06:27:53.397611 ################################################################# Oct 3 06:27:53.709610 ################################################################# Oct 3 06:27:54.033603 ################################################################# Oct 3 06:27:54.345603 ################################################################# Oct 3 06:27:54.649613 ################################################################# Oct 3 06:27:54.949611 ################################################################# Oct 3 06:27:55.237623 ################################################################# Oct 3 06:27:55.549609 ################################################################# Oct 3 06:27:55.837599 ################################################################# Oct 3 06:27:56.137606 ################################################################# Oct 3 06:27:56.449592 ################################################################# Oct 3 06:27:56.749607 ################################################################# Oct 3 06:27:57.049622 ################################################################# Oct 3 06:27:57.349645 ######################################## Oct 3 06:27:57.541669 2.8 MiB/s Oct 3 06:27:57.541669 done Oct 3 06:27:57.541691 Bytes transferred = 26339175 (191e767 hex) Oct 3 06:27:57.541716 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/linux Oct 3 06:27:57.553722 Using asx0 device Oct 3 06:27:57.553722 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 06:27:57.565709 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/linux'. Oct 3 06:27:57.565709 Load address: 0x42000000 Oct 3 06:27:57.565721 Loading: *################################################################# Oct 3 06:27:57.889657 ################################################################# Oct 3 06:27:58.189677 ################################################################# Oct 3 06:27:58.513685 ################################################################# Oct 3 06:27:58.825658 ################################################################# Oct 3 06:27:59.137685 ############################################# Oct 3 06:27:59.365761 2.8 MiB/s Oct 3 06:27:59.365818 done Oct 3 06:27:59.365871 Bytes transferred = 5427712 (52d200 hex) Oct 3 06:27:59.365919 append: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=33306 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 06:27:59.413765 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb Oct 3 06:27:59.413836 Using asx0 device Oct 3 06:27:59.413879 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 06:27:59.425778 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb'. Oct 3 06:27:59.437704 Load address: 0x43000000 Oct 3 06:27:59.437760 Loading: *#### Oct 3 06:27:59.449686 2.3 MiB/s Oct 3 06:27:59.449740 done Oct 3 06:27:59.449781 Bytes transferred = 46686 (b65e hex) Oct 3 06:27:59.461748 Kernel image @ 0x42000000 [ 0x000000 - 0x52d200 ] Oct 3 06:27:59.461808 ## Flattened Device Tree blob at 43000000 Oct 3 06:27:59.461855 Booting using the fdt blob at 0x43000000 Oct 3 06:27:59.473699 Loading Ramdisk to 4e6e1000, end 4ffff767 ... OK Oct 3 06:27:59.893691 Loading Device Tree to 4e6d2000, end 4e6e065d ... OK Oct 3 06:27:59.893754 Oct 3 06:27:59.905715 Starting kernel ...(fake run for tracing) Oct 3 06:27:59.905777 Oct 3 06:27:59.905815 Oct 3 06:27:59.917689 Starting kernel ... Oct 3 06:27:59.917746 Oct 3 06:27:59.917785 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 06:28:05.965834 [ 0.000000] Linux version 6.1.0-25-armmp (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.106-3 (2024-08-26) Oct 3 06:28:05.989735 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 06:28:05.989803 [ 0.000000] CPU: div instructions available: patching division code Oct 3 06:28:06.001737 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 06:28:06.001830 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 06:28:06.013747 [ 0.000000] Memory policy: Data cache writealloc Oct 3 06:28:06.013806 [ 0.000000] efi: UEFI not found. Oct 3 06:28:06.025732 [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 Oct 3 06:28:06.025794 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 06:28:06.025840 [ 0.000000] Zone ranges: Oct 3 06:28:06.025882 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 06:28:06.037752 [ 0.000000] Normal empty Oct 3 06:28:06.037808 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 06:28:06.049741 [ 0.000000] Movable zone start for each node Oct 3 06:28:06.049801 [ 0.000000] Early memory node ranges Oct 3 06:28:06.049846 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 06:28:06.061725 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 06:28:06.061725 [ 0.000000] percpu: Embedded 18 pages/cpu s44692 r8192 d20844 u73728 Oct 3 06:28:06.073673 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 06:28:06.085662 [ 0.000000] Kernel command line: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=33306 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 06:28:06.121811 [ 0.000000] Unknown kernel command line parameters "preseed --- vga=normal auto=true hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=33306 domain=test-lab.xenproject.org", will be passed to user space. Oct 3 06:28:06.157687 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 06:28:06.169667 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 06:28:06.181788 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 06:28:06.181852 [ 0.000000] Memory: 2015968K/2097152K available (11264K kernel code, 1696K rwdata, 3724K rodata, 2048K init, 376K bss, 64800K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 06:28:06.193682 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 06:28:06.205655 [ 0.000000] ftrace: allocating 39612 entries in 117 pages Oct 3 06:28:06.205715 [ 0.000000] ftrace: allocated 117 pages with 5 groups Oct 3 06:28:06.217664 [ 0.000000] trace event string verifier disabled Oct 3 06:28:06.217721 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 06:28:06.229681 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 06:28:06.229730 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 06:28:06.241670 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 06:28:06.241702 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 06:28:06.253670 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 06:28:06.253713 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 06:28:06.265669 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 06:28:06.265713 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 06:28:06.277669 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 06:28:06.277713 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 06:28:06.289658 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 06:28:06.289732 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 06:28:06.301659 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 06:28:06.313664 [ 0.002613] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 06:28:06.313717 [ 0.002627] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 06:28:06.325669 [ 0.002642] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 06:28:06.337777 [ 0.002654] Ignoring duplicate/late registration of read_current_timer delay Oct 3 06:28:06.337862 [ 0.003013] Console: colour dummy device 80x30 Oct 3 06:28:06.349655 [ 0.003055] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 06:28:06.361668 [ 0.003068] CPU: Testing write buffer coherency: ok Oct 3 06:28:06.361708 [ 0.003110] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 06:28:06.373672 [ 0.003118] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 06:28:06.373714 [ 0.003125] pid_max: default: 32768 minimum: 301 Oct 3 06:28:06.385667 [ 0.003485] LSM: Security Framework initializing Oct 3 06:28:06.385702 [ 0.003558] landlock: Up and running. Oct 3 06:28:06.385748 [ 0.003563] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 06:28:06.397670 [ 0.003745] AppArmor: AppArmor initialized Oct 3 06:28:06.397674 [ 0.003758] TOMOYO Linux initialized Oct 3 06:28:06.397726 [ 0.003803] LSM support for eBPF active Oct 3 06:28:06.413699 [ 0.004049] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 06:28:06.413752 [ 0.004062] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 06:28:06.425668 [ 0.005491] /cpus/cpu@0 missing clock-frequency property Oct 3 06:28:06.425713 [ 0.005521] /cpus/cpu@1 missing clock-frequency property Oct 3 06:28:06.437665 [ 0.005534] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 06:28:06.437722 [ 0.006486] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 06:28:06.449662 [ 0.006493] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 06:28:06.449702 [ 0.006597] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 06:28:06.461719 [ 0.006602] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 06:28:06.461719 [ 0.006746] Setting up static identity map for 0x40300000 - 0x403000ac Oct 3 06:28:06.473754 [ 0.007906] rcu: Hierarchical SRCU implementation. Oct 3 06:28:06.473815 [ 0.007912] rcu: Max phase no-delay instances is 1000. Oct 3 06:28:06.485738 [ 0.010031] EFI services will not be available. Oct 3 06:28:06.485798 [ 0.010377] smp: Bringing up secondary CPUs ... Oct 3 06:28:06.485845 [ 0.011126] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 06:28:06.497747 [ 0.011138] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 06:28:06.509738 [ 0.011271] smp: Brought up 1 node, 2 CPUs Oct 3 06:28:06.509798 [ 0.011281] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 06:28:06.521740 [ 0.011289] CPU: All CPU(s) started in HYP mode. Oct 3 06:28:06.521802 [ 0.011292] CPU: Virtualization extensions available. Oct 3 06:28:06.521851 [ 0.011916] devtmpfs: initialized Oct 3 06:28:06.533750 [ 0.023270] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 06:28:06.533788 [ 0.023504] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 06:28:06.545772 [ 0.023530] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 06:28:06.557752 [ 0.024051] pinctrl core: initialized pinctrl subsystem Oct 3 06:28:06.557816 [ 0.024748] DMI not present or invalid. Oct 3 06:28:06.557862 [ 0.025420] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 06:28:06.569758 [ 0.030803] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 06:28:06.569823 [ 0.032351] audit: initializing netlink subsys (disabled) Oct 3 06:28:06.581759 [ 0.032551] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 Oct 3 06:28:06.593747 [ 0.033706] thermal_sys: Registered thermal governor 'fair_share' Oct 3 06:28:06.593811 [ 0.033713] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 06:28:06.605736 [ 0.033718] thermal_sys: Registered thermal governor 'step_wise' Oct 3 06:28:06.605800 [ 0.033723] thermal_sys: Registered thermal governor 'user_space' Oct 3 06:28:06.617752 [ 0.033727] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 06:28:06.617817 [ 0.034101] No ATAGs? Oct 3 06:28:06.617860 [ 0.034170] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 06:28:06.629751 [ 0.034179] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 06:28:06.629813 [ 0.035259] Serial: AMBA PL011 UART driver Oct 3 06:28:06.641731 [ 0.084730] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 06:28:06.641801 [ 0.091749] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 06:28:06.653754 [ 0.102772] iommu: Default domain type: Translated Oct 3 06:28:06.665746 [ 0.102781] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 06:28:06.665811 [ 0.103750] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 06:28:06.677734 [ 0.104283] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 06:28:06.677796 [ 0.104295] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 06:28:06.677846 [ 0.104825] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 06:28:06.689761 [ 0.104855] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 06:28:06.701759 [ 0.105039] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 06:28:06.701820 [ 0.105394] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 06:28:06.713765 [ 0.105404] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 06:28:06.713828 [ 0.105799] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 06:28:06.725751 [ 0.106088] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 06:28:06.725812 [ 0.106098] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 06:28:06.737740 [ 0.106375] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 06:28:06.737802 [ 0.106475] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 06:28:06.737850 [ 0.106484] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 06:28:06.749747 [ 0.106684] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 06:28:06.749808 [ 0.106879] pps_core: LinuxPPS API ver. 1 registered Oct 3 06:28:06.761743 [ 0.106884] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 06:28:06.773734 [ 0.106899] PTP clock support registered Oct 3 06:28:06.773794 [ 0.108543] NetLabel: Initializing Oct 3 06:28:06.773841 [ 0.108550] NetLabel: domain hash size = 128 Oct 3 06:28:06.785723 [ 0.108555] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 06:28:06.785787 [ 0.108610] NetLabel: unlabeled traffic allowed by default Oct 3 06:28:06.785838 [ 0.108794] vgaarb: loaded Oct 3 06:28:06.797777 [ 0.109441] clocksource: Switched to clocksource mct-frc Oct 3 06:28:06.797840 [ 0.110074] VFS: Disk quotas dquot_6.6.0 Oct 3 06:28:06.797887 [ 0.110161] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 06:28:06.809749 [ 0.110899] AppArmor: AppArmor Filesystem Enabled Oct 3 06:28:06.809828 [ 0.120878] NET: Registered PF_INET protocol family Oct 3 06:28:06.821742 [ 0.121107] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 06:28:06.821812 [ 0.122719] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 06:28:06.833754 [ 0.122823] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 06:28:06.845755 [ 0.122848] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 06:28:06.845824 [ 0.122950] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 06:28:06.857701 [ 0.123181] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 06:28:06.869737 [ 0.123405] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 06:28:06.869807 [ 0.123512] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 06:28:06.881739 [ 0.123553] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 06:28:06.881805 [ 0.123752] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 06:28:06.893677 [ 0.123788] NET: Registered PF_XDP protocol family Oct 3 06:28:06.893677 [ 0.123803] PCI: CLS 0 bytes, default 64 Oct 3 06:28:06.893717 [ 0.124923] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 06:28:06.905714 [ 0.125176] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 06:28:06.917776 [ 0.129805] Trying to unpack rootfs image as initramfs... Oct 3 06:28:06.917837 [ 0.183045] Initialise system trusted keyrings Oct 3 06:28:06.929736 [ 0.183135] Key type blacklist registered Oct 3 06:28:06.929795 [ 0.183570] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 06:28:06.929847 [ 0.190745] zbud: loaded Oct 3 06:28:06.941765 [ 0.194429] integrity: Platform Keyring initialized Oct 3 06:28:06.941826 [ 0.194477] integrity: Machine keyring initialized Oct 3 06:28:06.941874 [ 0.194485] Key type asymmetric registered Oct 3 06:28:06.953728 [ 0.194492] Asymmetric key parser 'x509' registered Oct 3 06:28:06.953728 [ 1.504194] Freeing initrd memory: 25724K Oct 3 06:28:06.965765 [ 1.515755] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 06:28:06.965829 [ 1.516059] bounce: pool size: 64 pages Oct 3 06:28:06.965875 [ 1.516228] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 06:28:06.977691 [ 1.516409] io scheduler mq-deadline registered Oct 3 06:28:06.977758 [ 1.521566] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 06:28:06.989674 [ 1.542188] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 06:28:07.001671 [ 1.542201] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 06:28:07.001729 [ 1.544467] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 06:28:07.013672 [ 1.544477] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 06:28:07.025672 [ 1.545321] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 06:28:07.025726 [ 1.545330] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 06:28:07.037824 [ 1.546178] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 06:28:07.049670 [ 1.546187] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 06:28:07.061657 [ 1.548465] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 06:28:07.061723 [ 1.551347] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 06:28:07.073639 [ 1.554126] Serial: AMBA driver Oct 3 06:28:07.073639 [ 1.554352] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 06:28:07.085621 [ 1.554868] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 06:28:07.097689 [ 1.555375] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 06:28:07.097769 [ 2.693481] printk: console [ttySAC2] enabled Oct 3 06:28:07.109664 [ 2.698339] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 06:28:07.121624 [ 2.708944] STM32 USART driver initialized Oct 3 06:28:07.121663 [ 2.723106] mousedev: PS/2 mouse device common for all mice Oct 3 06:28:07.133628 [ 2.761410] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 06:28:07.169625 [ 2.770041] s5m-rtc s5m-rtc: setting system clock to 2000-01-02T00:00:32 UTC (946771232) Oct 3 06:28:07.181707 [ 2.779774] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 06:28:07.193762 [ 2.787235] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 06:28:07.205707 [ 2.795232] NET: Registered PF_INET6 protocol family Oct 3 06:28:07.205769 [ 2.808912] Segment Routing with IPv6 Oct 3 06:28:07.217717 [ 2.811180] In-situ OAM (IOAM) with IPv6 Oct 3 06:28:07.229765 [ 2.815105] mip6: Mobile IPv6 Oct 3 06:28:07.229823 [ 2.817986] NET: Registered PF_PACKET protocol family Oct 3 06:28:07.229873 [ 2.823118] mpls_gso: MPLS GSO support Oct 3 06:28:07.241735 [ 2.827359] ThumbEE CPU extension supported. Oct 3 06:28:07.241797 [ 2.831011] Registering SWP/SWPB emulation handler Oct 3 06:28:07.241845 [ 2.836258] registered taskstats version 1 Oct 3 06:28:07.253702 [ 2.839877] Loading compiled-in X.509 certificates Oct 3 06:28:07.253764 [ 3.300399] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 06:28:07.721769 [ 3.307717] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 06:28:07.721853 [ 3.318699] zswap: loaded using pool lzo/zbud Oct 3 06:28:07.733741 [ 3.322726] Key type .fscrypt registered Oct 3 06:28:07.733800 [ 3.326084] Key type fscrypt-provisioning registered Oct 3 06:28:07.745690 [ 3.339765] Key type encrypted registered Oct 3 06:28:07.745750 [ 3.342341] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 06:28:07.757687 [ 3.347836] ima: No TPM chip found, activating TPM-bypass! Oct 3 06:28:07.757721 [ 3.353260] ima: Allocated hash algorithm: sha256 Oct 3 06:28:07.769745 [ 3.357970] ima: No architecture policies found Oct 3 06:28:07.769805 [ 3.362506] evm: Initialising EVM extended attributes: Oct 3 06:28:07.781752 [ 3.367576] evm: security.selinux Oct 3 06:28:07.781812 [ 3.370872] evm: security.SMACK64 (disabled) Oct 3 06:28:07.781859 [ 3.375124] evm: security.SMACK64EXEC (disabled) Oct 3 06:28:07.793745 [ 3.379724] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 06:28:07.793807 [ 3.384759] evm: security.SMACK64MMAP (disabled) Oct 3 06:28:07.793855 [ 3.389359] evm: security.apparmor Oct 3 06:28:07.805745 [ 3.392744] evm: security.ima Oct 3 06:28:07.805803 [ 3.395696] evm: security.capability Oct 3 06:28:07.805849 [ 3.399261] evm: HMAC attrs: 0x1 Oct 3 06:28:07.805892 [ 3.986635] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 06:28:08.405692 [ 3.992618] clk: Disabling unused clocks Oct 3 06:28:08.405752 [ 4.006501] Freeing unused kernel image (initmem) memory: 2048K Oct 3 06:28:08.417750 [ 4.011366] Checked W+X mappings: passed, no W+X pages found Oct 3 06:28:08.429695 [ 4.016622] Run /init as init process Oct 3 06:28:08.429753 [ 4.557970] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 06:28:08.969726 [ 4.643503] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 06:28:09.053756 [ 4.659064] usbcore: registered new interface driver usbfs Oct 3 06:28:09.077693 [ 4.659711] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 06:28:09.077731 [ 4.672212] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 06:28:09.089734 [ 4.692074] usbcore: registered new interface driver hub Oct 3 06:28:09.101650 [ 4.714281] usbcore: registered new device driver usb Oct 3 06:28:09.125630 [ 4.724118] phy phy-12130000.phy.1: phy_power_on was called before phy_init Oct 3 06:28:09.137762 [ 4.738407] exynos-ohci 12120000.usb: USB Host Controller Oct 3 06:28:09.149656 [ 4.760171] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Oct 3 06:28:09.173759 [ 4.760435] phy phy-12130000.phy.1: phy_power_on was called before phy_init Oct 3 06:28:09.185734 [ 4.773662] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Oct 3 06:28:09.185805 [ 4.779748] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 06:28:09.197692 [ 4.796921] VDD_ALIVE_1.0V: Bringing 1000000uV into 1100000-1100000uV Oct 3 06:28:09.209716 [ 4.837782] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 06:28:09.245714 [ 4.865514] usb3503 usb-hub: switched to HUB mode Oct 3 06:28:09.281754 [ 4.868759] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 06:28:09.281817 [ 4.876010] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 06:28:09.293736 [ 4.882871] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 06:28:09.293817 [ 4.890037] usb usb1: Product: USB Host Controller Oct 3 06:28:09.305765 [ 4.894809] usb usb1: Manufacturer: Linux 6.1.0-25-armmp ohci_hcd Oct 3 06:28:09.305829 [ 4.900884] usb usb1: SerialNumber: 12120000.usb Oct 3 06:28:09.317624 [ 4.907728] hub 1-0:1.0: USB hub found Oct 3 06:28:09.317657 [ 4.910973] hub 1-0:1.0: 3 ports detected Oct 3 06:28:09.317682 [ 4.920044] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Oct 3 06:28:09.329737 [ 4.930899] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Oct 3 06:28:09.341658 [ 4.957551] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 06:28:09.365721 [ 4.965865] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 06:28:09.377766 [ 4.972707] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 06:28:09.389763 [ 4.979924] usb usb2: Product: EHCI Host Controller Oct 3 06:28:09.389823 [ 4.984753] usb usb2: Manufacturer: Linux 6.1.0-25-armmp ehci_hcd Oct 3 06:28:09.401742 [ 4.990845] usb usb2: SerialNumber: 12110000.usb Oct 3 06:28:09.401803 [ 4.996961] hub 2-0:1.0: USB hub found Oct 3 06:28:09.413706 [ 4.999329] hub 2-0:1.0: 3 ports detected Oct 3 06:28:09.413765 [ 5.194918] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 06:28:09.605814 [ 5.199431] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 06:28:09.617758 [ 5.207102] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 06:28:09.629737 [ 5.216015] xhci-hcd xhci-hcd.2.auto: irq 108, io mem 0x12000000 Oct 3 06:28:09.629800 [ 5.222197] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 06:28:09.641759 [ 5.227437] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 06:28:09.641829 [ 5.235085] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 06:28:09.653765 [ 5.241733] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 06:28:09.653835 [ 5.249827] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 06:28:09.665765 [ 5.257027] usb usb3: Product: xHCI Host Controller Oct 3 06:28:09.665825 [ 5.261895] usb usb3: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 06:28:09.677762 [ 5.267968] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 06:28:09.677823 [ 5.272839] usb 2-3: new high-speed USB device number 2 using exynos-ehci Oct 3 06:28:09.689757 [ 5.280267] hub 3-0:1.0: USB hub found Oct 3 06:28:09.689815 [ 5.283367] hub 3-0:1.0: 1 port detected Oct 3 06:28:09.701757 [ 5.287743] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 06:28:09.701829 [ 5.295435] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 06:28:09.713712 [ 5.303553] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 06:28:09.725760 [ 5.310766] usb usb4: Product: xHCI Host Controller Oct 3 06:28:09.725823 [ 5.315615] usb usb4: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 06:28:09.725873 [ 5.321690] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 06:28:09.737739 [ 5.327223] hub 4-0:1.0: USB hub found Oct 3 06:28:09.737798 [ 5.330315] hub 4-0:1.0: 1 port detected Oct 3 06:28:09.737843 [ 5.433926] usb 2-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Oct 3 06:28:09.845749 [ 5.440707] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 3 06:28:09.857712 [ 5.458822] hub 2-3:1.0: USB hub found Oct 3 06:28:09.869748 [ 5.463785] hub 2-3:1.0: 3 ports detected Oct 3 06:28:09.869807 Starting system log daemon: syslogd, klogd. Oct 3 06:28:09.893664 /var/run/utmp: No such file or directory Oct 3 06:28:11.741706 [?1h=(B   Oct 3 06:28:11.789734  Oct 3 06:28:11.789794 [  (-*) ][ Jan 02  0:00 ] Oct 3 06:28:11.801787 [  (0*start) ][ Jan 02  0:00 ] Oct 3 06:28:11.813750 [  (0*start) ][ Jan 02  0:00 ] Oct 3 06:28:11.837747 [  (0*start) ][ Jan 02  0:00 ] Oct 3 06:28:11.849747 [  (0*start) ][ Jan 02  0:00 ]                        [  (0*start) ][ Jan 02  0:00 ][  (0*start) ][ Jan 02  0:00 ] Oct 3 06:28:11.897758 [ 0- start  (2*shell) ][ Jan 02  0:00 ] Oct 3 06:28:11.921747 [ 0- start  (2*shell) ][ Jan 02  0:00 ] Oct 3 06:28:11.933757 [ 0- start  (2*shell) ][ Jan 02  0:00 ] Oct 3 06:28:11.945746 [ 0- start  (2*shell) ][ Jan 02  0:00 ]                        [ 0- start  (2*shell) ][ Jan 02  0:00 ][ 0- start  (2*shell) ][ Jan 02  0:00 ] Oct 3 06:28:12.005764 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:00 ] Oct 3 06:28:12.017739 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:00 ] Oct 3 06:28:12.029742 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:00 ] Oct 3 06:28:12.041737 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:00 ]                        [ 0 start 2- shell  (3*shell) ][ Jan 02  0:00 ][ 0 start 2- shell  (3*shell) ][ Jan 02  0:00 ] Oct 3 06:28:12.101749 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:00 ] Oct 3 06:28:12.113645 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:00 ] Oct 3 06:28:12.125755 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:00 ] Oct 3 06:28:12.137790 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:00 ]                        [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:00 ][ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:00 ] Oct 3 06:28:12.197765 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Oct 3 06:28:12.209767 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Oct 3 06:28:12.221742 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Oct 3 06:28:12.233749 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:00 ]                        [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:00 ][ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Oct 3 06:28:12.293769 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Oct 3 06:28:12.305776 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Oct 3 06:28:12.317716 [  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Oct 3 06:28:12.773786 Detecting network hardware ... 2%... 95%... 100% Oct 3 06:28:14.513715 Detecting link on eth0; please wait... ... 0%... 10%... 20% Oct 3 06:28:19.397736 Waiting for link-local address... ... 8%... 16%... 25%... 33%... 41%... 100% Oct 3 06:28:20.681704 Attempting IPv6 autoconfiguration... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 75%... 83%... 91%... 100% Oct 3 06:28:26.750495 Configuring the network with DHCP ... 0%... 100% Oct 3 06:28:29.912815 [  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:01 ] Checking the Debian archive mirror ... 25%... 50%... 75%... 100% Oct 3 06:28:37.997029 Loading additional components ... 0%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Oct 3 06:29:11.049750 Setting up the clock ... 0%... 3%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  6:29 ]... 100% Oct 3 06:29:13.809748 Loading additional components ... 50%... 100% Oct 3 06:29:15.453689 Detecting disks and all other hardware ... 2%... 95%... 100% Oct 3 06:29:20.084953 Loading additional components ... 12%... 25%... 37%... 50%... 62%... 75%... 87%... 100% Oct 3 06:29:27.173038 Loading additional components ... 25%... 50%... 75%... 100% Oct 3 06:29:29.532842 Starting up the partitioner ... 4%... 13%... 21%... 30%... 43%... 52%... 60%... 73%... 82%... 91%... 100% Oct 3 06:29:42.568936 Guided partitioning ... 16%... 33%... 50%... 66%... 83%... 100% Oct 3 06:29:51.028977 Starting up the partitioner ... 4%... 12%... 20%... 32%... 40%... 52%... 60%... 72%... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  6:30 ]... 92%... 100% Oct 3 06:30:02.005690 Partitions formatting ... 33% Oct 3 06:30:10.832924 Partitions formatting Oct 3 06:30:19.929605 Partitions formatting Installing the base system ... 0%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  6:31 ]... 17%... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  6:32 ]... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  6:33 ]... 48%... 50%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  6:34 ]...  Oct 3 06:34:06.825780  60%... 70%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  6:35 ]... 79%... 83%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  6:36 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  6:37 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  6:38 ]... 91%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  6:39 ]... 100% Oct 3 06:39:46.421736 Configuring apt ... 7%... 14%... 14%... 21%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  6:40 ]... 35%... 42%... 50%... 61%... 71%. Oct 3 06:40:23.721646 ... 82%... 92%... 100% Oct 3 06:40:26.296823 Select and install software ... 1%... 10%... 13%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  6:41 ]... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  6:42 ]... 40%... 50%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  6:43 ]... Oct 3 06:43:15.589768 . 60%... 70%... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  6:44 ]... 88%... 90%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  6:45 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  6:46 ]... 94%... 100% Oct 3 06:46:18.705616 Finishing the installation ... 4%... 12%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  6:47 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  6:48 ]... 16%... 20%... 32%... 40%... 44%... Oct 3 06:48:29.617699  52%... 60%... 72%... 80%... 92% The system is going down NOW! Sent SIGKILL to all processes Oct 3 06:48:40.697790 Requesting system reboot Oct 3 06:48:40.697857 [ 1237.324620] reboot: Reó Oct 3 06:48:42.065735 Oct 3 06:48:42.065760 Oct 3 06:48:42.065831 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 06:48:42.065883 Oct 3 06:48:42.065924 CPU: Exynos5250@1000MHz Oct 3 06:48:42.065967 Oct 3 06:48:42.066005 Board: Arndale Oct 3 06:48:42.066045 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 06:48:42.077696 ready Oct 3 06:48:42.077725 DRAM: 2 GiB Oct 3 06:48:42.077749 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 06:48:42.089751 trace: enabled Oct 3 06:48:42.125703 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 06:48:42.485706 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 06:48:42.545745 In: serial Oct 3 06:48:42.557759 Out: serial Oct 3 06:48:42.557816 Err: serial Oct 3 06:48:42.557859 SCSI: ARNDALE SCSI INIT Oct 3 06:48:42.557902 Target spinup took 0 ms. Oct 3 06:48:42.557945 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 06:48:42.569784 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 06:48:42.569847 Net: Net Initialization Skipped Oct 3 06:48:42.581735 No ethernet found. Oct 3 06:48:42.581791 Hostname: arndale-westfield Oct 3 06:48:42.581836 Hit any key to stop autoboot: 2  1  0 Oct 3 06:48:44.501620 (Re)start USB... Oct 3 06:48:44.501654 USB0: USB EHCI 1.00 Oct 3 06:48:44.513597 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 06:48:50.105753 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 06:48:50.105807 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 06:48:50.561764 Waiting for Ethernet connection... unable to connect. Oct 3 06:48:55.393737 missing environment variable: pxeuuid Oct 3 06:48:55.405604 missing environment variable: bootfile Oct 3 06:48:55.405604 Retrieving file: pxelinux.cfg/00000000 Oct 3 06:48:55.405604 Waiting for Ethernet connection... done. Oct 3 06:48:59.089840 *** ERROR: `serverip' not set Oct 3 06:48:59.089909 missing environment variable: bootfile Oct 3 06:48:59.089956 Retrieving file: pxelinux.cfg/0000000 Oct 3 06:48:59.101813 *** ERROR: `serverip' not set Oct 3 06:48:59.101871 missing environment variable: bootfile Oct 3 06:48:59.101947 Retrieving file: pxelinux.cfg/000000 Oct 3 06:48:59.101994 *** ERROR: `serverip' not set Oct 3 06:48:59.113792 missing environment variable: bootfile Oct 3 06:48:59.113851 Retrieving file: pxelinux.cfg/00000 Oct 3 06:48:59.113896 Waiting for Ethernet connection... done. Oct 3 06:48:59.209756 *** ERROR: `serverip' not set Oct 3 06:48:59.221802 missing environment variable: bootfile Oct 3 06:48:59.221861 Retrieving file: pxelinux.cfg/0000 Oct 3 06:48:59.221906 *** ERROR: `serverip' not set Oct 3 06:48:59.221948 missing environment variable: bootfile Oct 3 06:48:59.233777 Retrieving file: pxelinux.cfg/000 Oct 3 06:48:59.233809 *** ERROR: `serverip' not set Oct 3 06:48:59.233833 missing environment variable: bootfile Oct 3 06:48:59.233856 Retrieving file: pxelinux.cfg/00 Oct 3 06:48:59.245811 *** ERROR: `serverip' not set Oct 3 06:48:59.245868 missing environment variable: bootfile Oct 3 06:48:59.245914 Retrieving file: pxelinux.cfg/0 Oct 3 06:48:59.245956 *** ERROR: `serverip' not set Oct 3 06:48:59.257841 missing environment variable: bootfile Oct 3 06:48:59.257900 Retrieving file: pxelinux.cfg/default-arm-exynos Oct 3 06:48:59.257947 *** ERROR: `serverip' not set Oct 3 06:48:59.269742 missing environment variable: bootfile Oct 3 06:48:59.269775 Retrieving file: pxelinux.cfg/default-arm Oct 3 06:48:59.269800 *** ERROR: `serverip' not set Oct 3 06:48:59.269824 missing environment variable: bootfile Oct 3 06:48:59.281766 Retrieving file: pxelinux.cfg/default Oct 3 06:48:59.281825 *** ERROR: `serverip' not set Oct 3 06:48:59.281869 Config file not found Oct 3 06:48:59.281911 scanning bus for devices... Oct 3 06:48:59.293684 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 06:48:59.317680 Type: Hard Disk Oct 3 06:48:59.317711 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 06:48:59.317738 Found 1 device(s). Oct 3 06:48:59.317789 Oct 3 06:48:59.317827 SCSI device 0: Oct 3 06:48:59.329816 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 06:48:59.329881 Type: Hard Disk Oct 3 06:48:59.329924 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 06:48:59.341714 ... is now current device Oct 3 06:48:59.341770 Scanning scsi 0... Oct 3 06:48:59.341812 Found U-Boot script /boot.scr Oct 3 06:48:59.461666 639 bytes read in 37 ms (16.6 KiB/s) Oct 3 06:48:59.497675 ## Executing script at 50000000 Oct 3 06:48:59.497707 Loading dtbs/exynos5250-arndale.dtb Oct 3 06:48:59.509679 46686 bytes read in 1587 ms (28.3 KiB/s) Oct 3 06:49:01.057709 Loading vmlinuz-6.1.0-25-armmp-lpae Oct 3 06:49:01.057743 5509632 bytes read in 186 ms (28.2 MiB/s) Oct 3 06:49:01.249683 Loading initrd.img-6.1.0-25-armmp-lpae Oct 3 06:49:01.261725 25732187 bytes read in 1887 ms (13 MiB/s) Oct 3 06:49:03.088888 Booting Oct 3 06:49:03.088888 Kernel image @ 0x42000000 [ 0x000000 - 0x541200 ] Oct 3 06:49:03.088888 ## Flattened Device Tree blob at 43000000 Oct 3 06:49:03.100881 Booting using the fdt blob at 0x43000000 Oct 3 06:49:03.100881 Loading Ramdisk to 4e775000, end 4ffff45b ... OK Oct 3 06:49:03.520844 Loading Device Tree to 4e766000, end 4e77465d ... OK Oct 3 06:49:03.520844 Oct 3 06:49:03.532854 Starting kernel ...(fake run for tracing) Oct 3 06:49:03.532854 Oct 3 06:49:03.532854 Oct 3 06:49:03.532854 Starting kernel ... Oct 3 06:49:03.532854 Oct 3 06:49:03.532854 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 06:49:09.689030 [ 0.000000] Linux version 6.1.0-25-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.106-3 (2024-08-26) Oct 3 06:49:09.707101 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=30c5387d Oct 3 06:49:09.712888 [ 0.000000] CPU: div instructions available: patching division code Oct 3 06:49:09.724894 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 06:49:09.724894 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 06:49:09.736893 [ 0.000000] Memory policy: Data cache writealloc Oct 3 06:49:09.736893 [ 0.000000] efi: UEFI not found. Oct 3 06:49:09.736893 [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000 Oct 3 06:49:09.748891 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 06:49:09.748891 [ 0.000000] Zone ranges: Oct 3 06:49:09.748891 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 06:49:09.760890 [ 0.000000] Normal empty Oct 3 06:49:09.760890 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 06:49:09.772895 [ 0.000000] Movable zone start for each node Oct 3 06:49:09.772895 [ 0.000000] Early memory node ranges Oct 3 06:49:09.772895 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 06:49:09.784889 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 06:49:09.784889 [ 0.000000] percpu: Embedded 18 pages/cpu s44820 r8192 d20716 u73728 Oct 3 06:49:09.796895 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 06:49:09.796895 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=ttySAC2,115200n8 Oct 3 06:49:09.809045 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 06:49:09.820887 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 06:49:09.832889 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 06:49:09.832889 [ 0.000000] Memory: 2015504K/2097152K available (12288K kernel code, 1717K rwdata, 3748K rodata, 2048K init, 383K bss, 65264K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 06:49:09.844894 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 06:49:09.856894 [ 0.000000] ftrace: allocating 39996 entries in 118 pages Oct 3 06:49:09.856894 [ 0.000000] ftrace: allocated 118 pages with 5 groups Oct 3 06:49:09.869017 [ 0.000000] trace event string verifier disabled Oct 3 06:49:09.869083 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 06:49:09.880891 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 06:49:09.880891 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 06:49:09.893083 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 06:49:09.893150 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 06:49:09.901799 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 06:49:09.901825 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 06:49:09.913798 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 06:49:09.913798 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 06:49:09.925788 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 06:49:09.925814 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 06:49:09.937778 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 06:49:09.949723 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 06:49:09.949761 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 06:49:09.961785 [ 0.002619] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 06:49:09.961848 [ 0.002634] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 06:49:09.973803 [ 0.002649] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 06:49:09.985788 [ 0.002660] Ignoring duplicate/late registration of read_current_timer delay Oct 3 06:49:09.997797 [ 0.003029] Console: colour dummy device 80x30 Oct 3 06:49:09.997859 [ 0.003071] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 06:49:10.009795 [ 0.003084] CPU: Testing write buffer coherency: ok Oct 3 06:49:10.009856 [ 0.003125] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 06:49:10.021794 [ 0.003133] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 06:49:10.021858 [ 0.003140] pid_max: default: 32768 minimum: 301 Oct 3 06:49:10.033762 [ 0.003509] LSM: Security Framework initializing Oct 3 06:49:10.033823 [ 0.003583] landlock: Up and running. Oct 3 06:49:10.045778 [ 0.003587] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 06:49:10.045844 [ 0.003775] AppArmor: AppArmor initialized Oct 3 06:49:10.045890 [ 0.003787] TOMOYO Linux initialized Oct 3 06:49:10.057783 [ 0.003832] LSM support for eBPF active Oct 3 06:49:10.057842 [ 0.004081] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 06:49:10.069787 [ 0.004095] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 06:49:10.069856 [ 0.005511] /cpus/cpu@0 missing clock-frequency property Oct 3 06:49:10.081770 [ 0.005538] /cpus/cpu@1 missing clock-frequency property Oct 3 06:49:10.081831 [ 0.005551] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 06:49:10.093780 [ 0.006507] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 06:49:10.093849 [ 0.006513] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 06:49:10.105744 [ 0.006615] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 06:49:10.105812 [ 0.006621] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 06:49:10.117677 [ 0.006760] Setting up static identity map for 0x40400000 - 0x404000ac Oct 3 06:49:10.117677 [ 0.007924] rcu: Hierarchical SRCU implementation. Oct 3 06:49:10.129795 [ 0.007930] rcu: Max phase no-delay instances is 1000. Oct 3 06:49:10.129862 [ 0.010060] EFI services will not be available. Oct 3 06:49:10.141759 [ 0.010406] smp: Bringing up secondary CPUs ... Oct 3 06:49:10.141820 [ 0.011150] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 06:49:10.141870 [ 0.011162] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 06:49:10.153806 [ 0.011309] smp: Brought up 1 node, 2 CPUs Oct 3 06:49:10.165784 [ 0.011318] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 06:49:10.165849 [ 0.011325] CPU: All CPU(s) started in HYP mode. Oct 3 06:49:10.177772 [ 0.011329] CPU: Virtualization extensions available. Oct 3 06:49:10.177835 [ 0.012193] devtmpfs: initialized Oct 3 06:49:10.177880 [ 0.023233] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 06:49:10.189776 [ 0.023466] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 06:49:10.201691 [ 0.023490] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 06:49:10.201731 [ 0.024054] pinctrl core: initialized pinctrl subsystem Oct 3 06:49:10.213746 [ 0.024781] DMI not present or invalid. Oct 3 06:49:10.213746 [ 0.025463] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 06:49:10.213746 [ 0.027012] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 06:49:10.225741 [ 0.028530] audit: initializing netlink subsys (disabled) Oct 3 06:49:10.225779 [ 0.028734] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 Oct 3 06:49:10.237792 [ 0.029918] thermal_sys: Registered thermal governor 'fair_share' Oct 3 06:49:10.249778 [ 0.029925] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 06:49:10.249841 [ 0.029930] thermal_sys: Registered thermal governor 'step_wise' Oct 3 06:49:10.261740 [ 0.029934] thermal_sys: Registered thermal governor 'user_space' Oct 3 06:49:10.261776 [ 0.029939] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 06:49:10.273788 [ 0.030140] No ATAGs? Oct 3 06:49:10.273844 [ 0.030207] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 06:49:10.285771 [ 0.030215] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 06:49:10.285835 [ 0.031299] Serial: AMBA PL011 UART driver Oct 3 06:49:10.285882 [ 0.080630] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 06:49:10.297791 [ 0.087585] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 06:49:10.309764 [ 0.091795] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages Oct 3 06:49:10.309827 [ 0.091802] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page Oct 3 06:49:10.321785 [ 0.099329] iommu: Default domain type: Translated Oct 3 06:49:10.321847 [ 0.099337] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 06:49:10.333768 [ 0.100305] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 06:49:10.333831 [ 0.100815] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 06:49:10.345785 [ 0.100826] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 06:49:10.345848 [ 0.101342] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 06:49:10.357785 [ 0.101372] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 06:49:10.369758 [ 0.101617] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 06:49:10.369758 [ 0.102117] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 06:49:10.369758 [ 0.102128] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 06:49:10.381740 [ 0.102500] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 06:49:10.381740 [ 0.102792] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 06:49:10.393785 [ 0.102801] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 06:49:10.393854 [ 0.103093] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 06:49:10.405778 [ 0.103234] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 06:49:10.405838 [ 0.103243] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 06:49:10.417783 [ 0.103429] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 06:49:10.417845 [ 0.103648] pps_core: LinuxPPS API ver. 1 registered Oct 3 06:49:10.417893 [ 0.103653] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 06:49:10.429803 [ 0.103670] PTP clock support registered Oct 3 06:49:10.441759 [ 0.105172] NetLabel: Initializing Oct 3 06:49:10.441818 [ 0.105177] NetLabel: domain hash size = 128 Oct 3 06:49:10.441865 [ 0.105182] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 06:49:10.453765 [ 0.105236] NetLabel: unlabeled traffic allowed by default Oct 3 06:49:10.453829 [ 0.105410] vgaarb: loaded Oct 3 06:49:10.453873 [ 0.106329] clocksource: Switched to clocksource mct-frc Oct 3 06:49:10.465762 [ 0.106911] VFS: Disk quotas dquot_6.6.0 Oct 3 06:49:10.465822 [ 0.106996] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 06:49:10.477778 [ 0.107825] AppArmor: AppArmor Filesystem Enabled Oct 3 06:49:10.477839 [ 0.117662] NET: Registered PF_INET protocol family Oct 3 06:49:10.477888 [ 0.117857] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 06:49:10.489770 [ 0.119344] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 06:49:10.501672 [ 0.119448] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 06:49:10.501672 [ 0.119472] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 06:49:10.513646 [ 0.119572] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 06:49:10.525677 [ 0.119803] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 06:49:10.525677 [ 0.120031] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 06:49:10.537669 [ 0.120124] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 06:49:10.537669 [ 0.120165] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 06:49:10.549677 [ 0.120395] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 06:49:10.549677 [ 0.120429] NET: Registered PF_XDP protocol family Oct 3 06:49:10.561661 [ 0.120441] PCI: CLS 0 bytes, default 64 Oct 3 06:49:10.561661 [ 0.120966] Trying to unpack rootfs image as initramfs... Oct 3 06:49:10.573664 [ 0.121297] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 06:49:10.573664 [ 0.122609] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 06:49:10.585645 [ 0.194594] Initialise system trusted keyrings Oct 3 06:49:10.585645 [ 0.194703] Key type blacklist registered Oct 3 06:49:10.597675 [ 0.195920] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 06:49:10.597675 [ 0.203876] zbud: loaded Oct 3 06:49:10.597675 [ 0.206990] integrity: Platform Keyring initialized Oct 3 06:49:10.609676 [ 0.207024] integrity: Machine keyring initialized Oct 3 06:49:10.609676 [ 0.207033] Key type asymmetric registered Oct 3 06:49:10.621659 [ 0.207041] Asymmetric key parser 'x509' registered Oct 3 06:49:10.621659 [ 1.423219] Freeing initrd memory: 25132K Oct 3 06:49:10.621659 [ 1.445389] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 06:49:10.633669 [ 1.445655] bounce: pool size: 64 pages Oct 3 06:49:10.633669 [ 1.445839] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 06:49:10.645673 [ 1.446009] io scheduler mq-deadline registered Oct 3 06:49:10.645673 [ 1.451176] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 06:49:10.657672 [ 1.472159] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 06:49:10.657672 [ 1.472172] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 06:49:10.669677 [ 1.474488] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 06:49:10.681672 [ 1.474498] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 06:49:10.693752 [ 1.475304] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 06:49:10.693752 [ 1.475313] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 06:49:10.705796 [ 1.476132] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 06:49:10.717783 [ 1.476140] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 06:49:10.717857 [ 1.478487] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 06:49:10.729806 [ 1.481299] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 06:49:10.741775 [ 1.484068] Serial: AMBA driver Oct 3 06:49:10.741833 [ 1.484292] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 06:49:10.753766 [ 1.484764] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 06:49:10.753839 [ 1.485232] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 06:49:10.765789 [ 2.565961] printk: console [ttySAC2] enabled Oct 3 06:49:10.765849 [ 2.570819] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 06:49:10.777794 [ 2.581415] STM32 USART driver initialized Oct 3 06:49:10.789703 [ 2.595850] mousedev: PS/2 mouse device common for all mice Oct 3 06:49:10.801727 [ 2.632644] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 06:49:10.837779 [ 2.641273] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T06:49:11 UTC (1727938151) Oct 3 06:49:10.849792 [ 2.651125] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 06:49:10.861750 [ 2.658641] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 06:49:10.861814 [ 2.666620] NET: Registered PF_INET6 protocol family Oct 3 06:49:10.873708 [ 2.690658] Segment Routing with IPv6 Oct 3 06:49:10.897776 [ 2.692899] In-situ OAM (IOAM) with IPv6 Oct 3 06:49:10.897836 [ 2.696888] mip6: Mobile IPv6 Oct 3 06:49:10.897880 [ 2.699742] NET: Registered PF_PACKET protocol family Oct 3 06:49:10.909778 [ 2.704905] mpls_gso: MPLS GSO support Oct 3 06:49:10.909838 [ 2.708946] ThumbEE CPU extension supported. Oct 3 06:49:10.909885 [ 2.712752] Registering SWP/SWPB emulation handler Oct 3 06:49:10.921749 [ 2.718040] registered taskstats version 1 Oct 3 06:49:10.921809 [ 2.721625] Loading compiled-in X.509 certificates Oct 3 06:49:10.921857 [ 3.182260] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 06:49:11.389790 [ 3.189608] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 06:49:11.401789 [ 3.200689] zswap: loaded using pool lzo/zbud Oct 3 06:49:11.401849 [ 3.204566] Key type .fscrypt registered Oct 3 06:49:11.413714 [ 3.207933] Key type fscrypt-provisioning registered Oct 3 06:49:11.413776 [ 3.232164] Key type encrypted registered Oct 3 06:49:11.437758 [ 3.234762] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 06:49:11.437820 [ 3.240249] ima: No TPM chip found, activating TPM-bypass! Oct 3 06:49:11.449728 [ 3.245694] ima: Allocated hash algorithm: sha256 Oct 3 06:49:11.449762 [ 3.250407] ima: No architecture policies found Oct 3 06:49:11.449788 [ 3.254958] evm: Initialising EVM extended attributes: Oct 3 06:49:11.461765 [ 3.259988] evm: security.selinux Oct 3 06:49:11.461823 [ 3.263276] evm: security.SMACK64 (disabled) Oct 3 06:49:11.473774 [ 3.267532] evm: security.SMACK64EXEC (disabled) Oct 3 06:49:11.473835 [ 3.272132] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 06:49:11.473884 [ 3.277163] evm: security.SMACK64MMAP (disabled) Oct 3 06:49:11.485775 [ 3.281764] evm: security.apparmor Oct 3 06:49:11.485834 [ 3.285149] evm: security.ima Oct 3 06:49:11.485878 [ 3.288100] evm: security.capability Oct 3 06:49:11.497703 [ 3.291666] evm: HMAC attrs: 0x1 Oct 3 06:49:11.497762 [ 3.878084] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 06:49:12.085715 [ 3.884056] clk: Disabling unused clocks Oct 3 06:49:12.085783 [ 3.896933] Freeing unused kernel image (initmem) memory: 2048K Oct 3 06:49:12.097725 [ 3.901799] Checked W+X mappings: passed, no W+X pages found Oct 3 06:49:12.109711 [ 3.907051] Run /init as init process Oct 3 06:49:12.109770 Loading, please wait... Oct 3 06:49:12.133672 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 06:49:12.217721 [ 4.782073] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 06:49:12.985737 [ 4.796201] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 06:49:12.997762 [ 4.796678] usbcore: registered new interface driver usbfs Oct 3 06:49:13.009713 [ 4.823089] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 06:49:13.033743 [ 4.830499] usbcore: registered new interface driver hub Oct 3 06:49:13.033805 [ 4.837264] usbcore: registered new device driver usb Oct 3 06:49:13.033853 [ 4.890255] phy phy-12130000.phy.2: phy_power_on was called before phy_init Oct 3 06:49:13.093731 [ 4.898658] Synopsys Designware Multimedia Card Interface Driver Oct 3 06:49:13.105688 [ 4.914795] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 06:49:13.117706 [ 4.927064] phy phy-12130000.phy.2: phy_power_on was called before phy_init Oct 3 06:49:13.129811 [ 4.933617] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 06:49:13.141779 [ 4.939857] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 06:49:13.141844 [ 4.940765] SCSI subsystem initialized Oct 3 06:49:13.141890 [ 4.948159] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Oct 3 06:49:13.153779 [ 4.958900] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 06:49:13.165747 [ 4.964226] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 06:49:13.165809 [ 4.971055] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 06:49:13.177711 [ 4.976072] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 06:49:13.177773 [ 4.986395] exynos-ohci 12120000.usb: USB Host Controller Oct 3 06:49:13.189758 [ 4.994302] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Oct 3 06:49:13.201728 [ 5.006226] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 06:49:13.201789 [ 5.019717] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Oct 3 06:49:13.225730 [ 5.030954] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo Oct 3 06:49:13.237763 [ 5.039242] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 109,32 bit host data width,128 deep fifo Oct 3 06:49:13.249698 [ 5.050457] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Oct 3 06:49:13.249733 [ 5.069000] mmc_host mmc0: card is polling. Oct 3 06:49:13.273727 [ 5.078569] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 06:49:13.285658 [ 5.083207] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 06:49:13.285698 [ 5.083240] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 06:49:13.297706 [ 5.092991] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 06:49:13.309774 [ 5.110315] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 06:49:13.309841 [ 5.117524] usb usb1: Product: EHCI Host Controller Oct 3 06:49:13.321764 [ 5.122369] usb usb1: Manufacturer: Linux 6.1.0-25-armmp-lpae ehci_hcd Oct 3 06:49:13.321829 [ 5.128875] usb usb1: SerialNumber: 12110000.usb Oct 3 06:49:13.333733 [ 5.139622] hub 1-0:1.0: USB hub found Oct 3 06:49:13.333792 [ 5.141954] hub 1-0:1.0: 3 ports detected Oct 3 06:49:13.345763 [ 5.148401] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 06:49:13.357752 [ 5.155260] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 06:49:13.357821 [ 5.162450] usb usb2: Product: USB Host Controller Oct 3 06:49:13.369751 [ 5.167226] usb usb2: Manufacturer: Linux 6.1.0-25-armmp-lpae ohci_hcd Oct 3 06:49:13.369816 [ 5.173713] usb usb2: SerialNumber: 12120000.usb Oct 3 06:49:13.381721 [ 5.185555] hub 2-0:1.0: USB hub found Oct 3 06:49:13.381780 [ 5.187943] hub 2-0:1.0: 3 ports detected Oct 3 06:49:13.393707 [ 5.243706] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 06:49:13.441771 [ 5.251516] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 06:49:13.453801 [ 5.257644] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 06:49:13.465781 [ 5.265035] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 06:49:13.477744 [ 5.268339] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 06:49:13.477817 [ 5.281125] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 06:49:13.489755 [ 5.287711] mmc0: new DDR MMC card at address 0001 Oct 3 06:49:13.489815 [ 5.291460] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Oct 3 06:49:13.501770 [ 5.298477] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Oct 3 06:49:13.501855 [ 5.305062] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 06:49:13.513758 [ 5.323740] mmc1: new high speed SDHC card at address aaaa Oct 3 06:49:13.525737 [ 5.333835] mmcblk0: p1 p2 p3 p4 Oct 3 06:49:13.537726 [ 5.344024] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Oct 3 06:49:13.549725 [ 5.345019] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Oct 3 06:49:13.549786 [ 5.382642] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Oct 3 06:49:13.585707 [ 5.413818] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (241:0) Oct 3 06:49:13.621702 [ 5.422954] scsi host0: ahci-dwc Oct 3 06:49:13.621760 [ 5.428972] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 110 Oct 3 06:49:13.633732 [ 5.618418] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 06:49:13.825730 [ 5.692681] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 06:49:13.897750 [ 5.801114] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:49:14.005760 [ 5.909078] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:49:14.113798 [ 5.910427] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 06:49:14.125806 [ 5.923987] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 06:49:14.125872 [ 5.929784] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 06:49:14.137770 [ 5.937282] ata1.00: configured for UDMA/133 Oct 3 06:49:14.137830 [ 5.941186] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 06:49:14.149701 [ 5.983029] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 06:49:14.185765 [ 5.987273] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 06:49:14.197756 [ 5.995441] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 06:49:14.197827 [ 6.004159] xhci-hcd xhci-hcd.2.auto: irq 111, io mem 0x12000000 Oct 3 06:49:14.209770 [ 6.010508] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 06:49:14.209832 [ 6.015575] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 06:49:14.221779 [ 6.023268] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:49:14.233753 [ 6.032511] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 06:49:14.233816 [ 6.039166] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 06:49:14.245782 [ 6.047244] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 06:49:14.257766 [ 6.054425] usb usb3: Product: xHCI Host Controller Oct 3 06:49:14.257826 [ 6.059310] usb usb3: Manufacturer: Linux 6.1.0-25-armmp-lpae xhci-hcd Oct 3 06:49:14.257878 [ 6.065793] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 06:49:14.269762 [ 6.071386] hub 3-0:1.0: USB hub found Oct 3 06:49:14.269821 [ 6.074435] hub 3-0:1.0: 1 port detected Oct 3 06:49:14.281779 [ 6.078873] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 06:49:14.281849 [ 6.086840] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 06:49:14.293758 [ 6.094624] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 06:49:14.293825 [ 6.101819] usb usb4: Product: xHCI Host Controller Oct 3 06:49:14.305762 [ 6.106687] usb usb4: Manufacturer: Linux 6.1.0-25-armmp-lpae xhci-hcd Oct 3 06:49:14.305826 [ 6.113190] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 06:49:14.317762 [ 6.118923] hub 4-0:1.0: USB hub found Oct 3 06:49:14.317820 [ 6.121805] hub 4-0:1.0: 1 port detected Oct 3 06:49:14.317866 [ 6.132590] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:49:14.341705 [ 6.164146] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 06:49:14.365792 [ 6.170267] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 06:49:14.377763 [ 6.175451] sd 0:0:0:0: [sda] Write Protect is off Oct 3 06:49:14.377824 [ 6.180300] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 06:49:14.389764 [ 6.190857] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 06:49:14.389827 [ 6.214820] sda: sda1 sda2 < sda5 > Oct 3 06:49:14.413622 [ 6.218458] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 06:49:14.413655 [ 6.240647] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:49:14.449722 [ 6.349315] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:49:14.557712 [ 6.457272] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:49:14.665710 [ 6.565240] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:49:14.773706 [ 6.973688] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 06:49:15.181712 [ 7.081298] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 06:49:15.289708 [ 7.258351] random: crng init done Oct 3 06:49:15.457709 [ 7.367512] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. Oct 3 06:49:15.578009 [ 7.378452] device-mapper: uevent: version 1.0.3 Oct 3 06:49:15.578065 [ 7.386399] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Oct 3 06:49:15.589776 [ 7.693761] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 06:49:15.901698 Begin: Loading essential drivers ... done. Oct 3 06:49:16.297685 Begin: Running /scripts/init-premount ... done. Oct 3 06:49:19.309776 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 06:49:19.309848 Begin: Running /scripts/local-premount ... done. Oct 3 06:49:19.381705 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 06:49:19.429698 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 06:49:19.537701 /dev/mapper/arndale--westfield--vg-root: clean, 39343/1220608 files, 378265/4882432 blocks Oct 3 06:49:19.741710 done. Oct 3 06:49:19.753679 [ 11.685978] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 06:49:19.885766 [ 11.888362] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 06:49:20.092886 done. Oct 3 06:49:20.092886 Begin: Running /scripts/local-bottom ... done. Oct 3 06:49:20.140851 Begin: Running /scripts/init-bottom ... done. Oct 3 06:49:20.187898 [ 12.207141] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. Oct 3 06:49:20.417036 INIT: version 3.06 booting Oct 3 06:49:20.756968 INIT: No inittab.d directory found Oct 3 06:49:20.844980 Using makefile-style concurrent boot in runlevel S. Oct 3 06:49:21.156988 Starting hotplug events dispatcher: systemd-udevd. Oct 3 06:49:22.804906 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 06:49:23.020902 Synthesizing the initial hotplug events (devices)...done. Oct 3 06:49:23.536879 Waiting for /dev to be fully populated...[ 15.535717] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 06:49:23.741044 [ 15.590737] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Oct 3 06:49:23.800893 [ 15.690196] sd 0:0:0:0: Attached scsi generic sg0 type 0 Oct 3 06:49:23.896883 [ 15.795879] panfrost 11800000.gpu: clock rate = 533000000 Oct 3 06:49:24.004885 [ 15.818404] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 06:49:24.029107 [ 15.828955] panfrost 11800000.gpu: mali-t600 id 0x600 major 0x0 minor 0x0 status 0x1 Oct 3 06:49:24.040948 [ 15.835338] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,31b4dfff Oct 3 06:49:24.040948 [ 15.843422] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 Oct 3 06:49:24.052950 [ 15.855139] panfrost 11800000.gpu: shader_present=0xf l2_present=0x1 Oct 3 06:49:24.065047 [ 15.866546] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 0 Oct 3 06:49:24.076980 [ 15.919962] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 06:49:24.124936 [ 16.028973] blk_print_req_error: 6 callbacks suppressed Oct 3 06:49:24.233038 [ 16.028990] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:49:24.245023 [ 16.078424] usb3503 usb-hub: switched to HUB mode Oct 3 06:49:24.280927 [ 16.081732] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 06:49:24.292884 [ 16.142230] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:49:24.352902 [ 16.256293] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:49:24.461073 [ 16.364484] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:49:24.569044 [ 16.402459] usb 1-3: new high-speed USB device number 2 using exynos-ehci Oct 3 06:49:24.605095 [ 16.472662] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:49:24.677113 [ 16.555641] OF: graph: no port node found in /soc/hdmi@14530000 Oct 3 06:49:24.761080 [ 16.566920] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Oct 3 06:49:24.773125 [ 16.573757] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 3 06:49:24.785060 [ 16.580947] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:49:24.785060 [ 16.590895] hub 1-3:1.0: USB hub found Oct 3 06:49:24.796924 [ 16.593953] hub 1-3:1.0: 3 ports detected Oct 3 06:49:24.796924 [ 16.690251] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:49:24.896929 [ 16.798434] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:49:25.004928 [ 16.890361] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 06:49:25.100891 [ 17.004197] usb 1-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=77.32 Oct 3 06:49:25.208927 [ 17.011250] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Oct 3 06:49:25.220950 [ 17.018441] usb 1-3.2: Product: USB2.0 Hub Oct 3 06:49:25.220950 [ 17.024138] hub 1-3.2:1.0: USB hub found Oct 3 06:49:25.232860 [ 17.026952] hub 1-3.2:1.0: 4 ports detected Oct 3 06:49:25.232941 [ 17.223095] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 06:49:25.436942 [ 17.326505] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 06:49:25.532947 [ 17.332804] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 06:49:25.544892 [ 17.453125] usb 1-3.2.4: New USB device found, idVendor=0b95, idProduct=772a, bcdDevice= 0.01 Oct 3 06:49:25.664958 [ 17.460427] usb 1-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Oct 3 06:49:25.664958 [ 17.467853] usb 1-3.2.4: Product: AX88772 Oct 3 06:49:25.676946 [ 17.472009] usb 1-3.2.4: Manufacturer: ASIX Elec. Corp. Oct 3 06:49:25.676946 [ 17.477077] usb 1-3.2.4: SerialNumber: 000001 Oct 3 06:49:25.676946 [ 17.944227] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 06:49:26.156875 [ 17.980726] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 06:49:26.192867 [ 18.661142] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 06:49:26.876933 [ 18.676815] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Oct 3 06:49:26.888931 [ 18.690633] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 4a:42:48:65:90:38 Oct 3 06:49:26.900950 [ 18.702975] usbcore: registered new interface driver asix Oct 3 06:49:26.912878 done. Oct 3 06:49:27.173683 [ 19.481424] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 06:49:27.677752 Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). Oct 3 06:49:27.713737 Checking file systems.../dev/sda1: clean, 922/61056 files, 25406/243968 blocks Oct 3 06:49:28.925700 done. Oct 3 06:49:28.973686 Cleaning up temporary files... /tmp. Oct 3 06:49:29.237707 [ 21.328099] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 06:49:29.525709 [ 21.376828] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 06:49:29.585691 [ 21.572783] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k FS Oct 3 06:49:29.777753 Mounting local filesystems...done. Oct 3 06:49:30.509750 Activating swapfile swap, if any...done. Oct 3 06:49:30.509866 Cleaning up temporary files.... Oct 3 06:49:30.701702 Starting Setting kernel variables: sysctl. Oct 3 06:49:31.037701 [ 23.269385] audit: type=1400 audit(1727938171.316:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=884 comm="apparmor_parser" Oct 3 06:49:31.481754 [ 23.287824] audit: type=1400 audit(1727938171.316:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=883 comm="apparmor_parser" Oct 3 06:49:31.493798 [ 23.301388] audit: type=1400 audit(1727938171.336:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=884 comm="apparmor_parser" Oct 3 06:49:31.517782 [ 23.658586] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 06:49:31.865708 [ 23.673109] audit: type=1400 audit(1727938171.720:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=917 comm="apparmor_parser" Oct 3 06:49:31.889752 [ 23.686903] audit: type=1400 audit(1727938171.724:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=917 comm="apparmor_parser" Oct 3 06:49:31.901754 [ 23.701597] audit: type=1400 audit(1727938171.724:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=917 comm="apparmor_parser" Oct 3 06:49:31.913732 [ 24.038227] audit: type=1400 audit(1727938172.084:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=916 comm="apparmor_parser" Oct 3 06:49:32.249790 [ 24.069400] audit: type=1400 audit(1727938172.104:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=916 comm="apparmor_parser" Oct 3 06:49:32.285758 [ 24.085304] audit: type=1400 audit(1727938172.108:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=916 comm="apparmor_parser" Oct 3 06:49:32.297779 [ 24.102780] audit: type=1400 audit(1727938172.116:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=916 comm="apparmor_parser" Oct 3 06:49:32.321703 Starting: AppArmorLoading AppArmor profiles...done. Oct 3 06:49:32.321766 . Oct 3 06:49:32.321807 [ 25.864225] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 06:49:34.068844 [ 25.870434] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 3 06:49:34.080768 Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1 Oct 3 06:49:35.368821 Copyright 2004-2022 Internet Systems Consortium. Oct 3 06:49:35.380900 All rights reserved. Oct 3 06:49:35.380900 For info, please visit https://www.isc.org/software/dhcp/ Oct 3 06:49:35.380900 Oct 3 06:49:35.380900 Listening on LPF/eth0/a6:46:13:77:e8:2f Oct 3 06:49:35.392830 Sending on LPF/eth0/a6:46:13:77:e8:2f Oct 3 06:49:35.392830 Sending on Socket/fallback Oct 3 06:49:35.392830 Created duid "\000\001\000\001.\220\372\373\246F\023w\350/". Oct 3 06:49:35.404802 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 Oct 3 06:49:35.404802 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 Oct 3 06:49:35.728804 DHCPOFFER of 10.149.64.45 from 10.149.64.4 Oct 3 06:49:35.801860 DHCPREQUEST for 10.149.64.45 on eth0 to 255.255.255.255 port 67 Oct 3 06:49:35.801936 DHCPACK of 10.149.64.45 from 10.149.64.4 Oct 3 06:49:35.801954 bound to 10.149.64.45 -- renewal in 283 seconds. Oct 3 06:49:35.801954 done. Oct 3 06:49:35.801954 Cleaning up temporary files.... Oct 3 06:49:35.801954 Starting nftables: none Oct 3 06:49:35.876765 . Oct 3 06:49:36.308763 INIT: Entering runlevel: 2 Oct 3 06:49:36.356700 Using makefile-style concurrent boot in runlevel 2. Oct 3 06:49:36.404765 Starting Apache httpd web server: apache2[ 28.900820] exynos4-fb 14400000.fimd: deferred probe timeout, ignoring dependency Oct 3 06:49:37.112891 [ 28.912101] exynos-mixer 14450000.mixer: deferred probe timeout, ignoring dependency Oct 3 06:49:37.124795 [ 28.920292] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations Oct 3 06:49:37.124795 [ 28.926674] exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm]) Oct 3 06:49:37.136809 [ 28.935267] exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm]) Oct 3 06:49:37.136809 [ 28.953792] exynos-drm exynos-drm: bound 14500000.dsi (ops hdmi_enable [exynosdrm]) Oct 3 06:49:37.160793 [ 28.976629] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm]) Oct 3 06:49:37.184792 [ 28.990605] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 06:49:37.196833 [ 28.997497] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 06:49:37.208792 [ 29.011012] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 Oct 3 06:49:37.220777 . Oct 3 06:49:38.352761 Starting NTP server: ntpd2024-10-03T06:49:38 ntpd[1133]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 06:49:38.640827 2024-10-03T06:49:38 ntpd[1133]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 06:49:38.652816 . Oct 3 06:49:38.652816 Starting periodic command scheduler: cron. Oct 3 06:49:38.892785 Starting system message bus: dbus. Oct 3 06:49:38.964773 Starting OpenBSD Secure Shell server: sshd. Oct 3 06:49:39.840902 Oct 3 06:49:40.896921 Debian GNU/Linux 12 arndale-westfield ttySAC2 Oct 3 06:49:40.914840 Oct 3 06:49:40.914907 arndale-westfield login: osstest kernel cookie fed810303a527aa97ecc7f6b12189e82 Oct 3 06:54:31.141826 INIT: Switching to r INIT: No initUsing makefile-style concurrent boot in runlevel 6. Oct 3 06:54:33.253776 Stopping SMP IRQ Balancer: irqbalance Oct 3 06:54:33.325763 . Oct 3 06:54:33.325816 Stopping hotplug events dispatcher: systemd-udevd. Oct 3 06:54:33.325866 Stopping nftables: none. Oct 3 06:54:33.325909 Saving the system clock to /dev/rtc0. Oct 3 06:54:34.249774 Hardware Clock updated to Thu Oct 3 06:54:34 UTC 2024. Oct 3 06:54:34.261717 Stopping Apache httpd web server: apache2. Oct 3 06:54:34.477751 Asking all remaining processes to terminate...done. Oct 3 06:54:34.813769 All processes ended within 1 seconds...done. Oct 3 06:54:34.825695 Deconfiguring network interfaces...ifdown: ignoring unknown interface eth0=eth0 Oct 3 06:54:34.945713 done. Oct 3 06:54:34.945801 [ 326.952433] EXT4-fs (sda1): unmounting filesystem. Oct 3 06:54:35.149740 Deactivating swap...done. Oct 3 06:54:35.197697 Unmounting local filesystems...done. Oct 3 06:54:35.209709 [ 327.240667] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 06:54:35.437752 Will now restart. Oct 3 06:54:35.725720 [ 327.546487] asix 1-3.2.4:1.0 eth0: Link is Down Oct 3 06:54:35.749734 [ 327.590971] sd 0:0:0:0: [sda] Synchronizing SCSI cache Oct 3 06:54:35.797726 [ 327.619134] wake enabled for irq 101 (gpx1-4) Oct 3 06:54:35.821787 [ 327.622016] wake enabled for irq 102 (gpx1-5) Oct 3 06:54:35.821819 [ 327.626377] wake enabled for irq 103 (gpx1-6) Oct 3 06:54:35.833770 [ 327.630712] wake enabled for irq 104 (gpx1-7) Oct 3 06:54:35.833830 [ 327.635052] wake enabled for irq 105 (gpx2-0) Oct 3 06:54:35.833876 [ 327.639392] wake enabled for irq 106 (gpx2-1) Oct 3 06:54:35.845732 [ 327.644211] reboot: Reű Oct 3 06:54:36.181759 Oct 3 06:54:36.181811 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 06:54:36.181863 Oct 3 06:54:36.181901 CPU: Exynos5250@1000MHz Oct 3 06:54:36.181943 Oct 3 06:54:36.181980 Board: Arndale Oct 3 06:54:36.193718 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 06:54:36.193778 ready Oct 3 06:54:36.193818 DRAM: 2 GiB Oct 3 06:54:36.193857 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 06:54:36.217707 trace: enabled Oct 3 06:54:36.253696 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 06:54:36.613699 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 06:54:36.673745 In: serial Oct 3 06:54:36.673799 Out: serial Oct 3 06:54:36.673841 Err: serial Oct 3 06:54:36.673882 SCSI: ARNDALE SCSI INIT Oct 3 06:54:36.673924 Target spinup took 0 ms. Oct 3 06:54:36.685769 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 06:54:36.685832 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 06:54:36.685881 Net: Net Initialization Skipped Oct 3 06:54:36.697742 No ethernet found. Oct 3 06:54:36.697797 Hostname: arndale-westfield Oct 3 06:54:36.697854 Hit any key to stop autoboot: 2  1  0 Oct 3 06:54:38.617791 (Re)start USB... Oct 3 06:54:38.636104 USB0: USB EHCI 1.00 Oct 3 06:54:38.636245 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 06:54:44.243057 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 06:54:44.243080 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 06:54:44.669701 Waiting for Ethernet connection... done. Oct 3 06:54:46.316846 BOOTP broadcast 1 Oct 3 06:54:46.328777 BOOTP broadcast 2 Oct 3 06:54:47.784821 DHCP client bound to address 10.149.64.45 (1528 ms) Oct 3 06:54:47.796757 Using asx0 device Oct 3 06:54:47.796813 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 06:54:47.796863 Filename 'pxelinux.0'. Oct 3 06:54:47.796905 Load address: 0x43e00000 Oct 3 06:54:47.808656 Loading: *### Oct 3 06:54:47.820688 2.4 MiB/s Oct 3 06:54:47.820688 done Oct 3 06:54:47.820688 Bytes transferred = 42430 (a5be hex) Oct 3 06:54:47.820688 missing environment variable: pxeuuid Oct 3 06:54:47.832716 Retrieving file: pxelinux.cfg/0A95402D Oct 3 06:54:47.832716 Using asx0 device Oct 3 06:54:47.832716 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 06:54:47.832716 Filename 'pxelinux.cfg/0A95402D'. Oct 3 06:54:47.844718 Load address: 0x51000000 Oct 3 06:54:47.844718 Loading: *# Oct 3 06:54:47.844718 31.3 KiB/s Oct 3 06:54:47.844718 done Oct 3 06:54:47.844718 Bytes transferred = 65 (41 hex) Oct 3 06:54:47.844718 Config file found Oct 3 06:54:47.856636 Ignoring unknown command: serial Oct 3 06:54:47.856636 1: local Oct 3 06:54:47.856636 scanning bus for devices... Oct 3 06:54:47.856636 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 06:54:47.880703 Type: Hard Disk Oct 3 06:54:47.880703 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 06:54:47.892719 Found 1 device(s). Oct 3 06:54:47.892719 Oct 3 06:54:47.892719 SCSI device 0: Oct 3 06:54:47.892719 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 06:54:47.904753 Type: Hard Disk Oct 3 06:54:47.904787 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 06:54:47.904822 ... is now current device Oct 3 06:54:47.904841 Scanning scsi 0... Oct 3 06:54:47.916766 Found U-Boot script /boot.scr Oct 3 06:54:48.084664 1794 bytes read in 35 ms (49.8 KiB/s) Oct 3 06:54:48.132705 ## Executing script at 50000000 Oct 3 06:54:48.132705 Loading dtbs/6.1.112+/exynos5250-arndale.dtb Oct 3 06:54:48.132705 46686 bytes read in 2530 ms (17.6 KiB/s) Oct 3 06:54:50.580672 1081360 bytes read in 124 ms (8.3 MiB/s) Oct 3 06:54:50.736720 osstest uboot 52841b4c72d6b1b4161e94dc55817da0 Oct 3 06:54:50.736720 Loaded xen-4.20-unstable to 0x41000000 (108010) Oct 3 06:54:50.736720 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan Oct 3 06:54:50.748707 10039808 bytes read in 432 ms (22.2 MiB/s) Oct 3 06:54:51.184797 Loaded vmlinuz-6.1.112+ to 0x42000000 (993200) Oct 3 06:54:51.196725 command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 06:54:51.208676 12059011 bytes read in 634 ms (18.1 MiB/s) Oct 3 06:54:51.828610 Loaded initrd.img-6.1.112+ to 0x43300000 (b80183) Oct 3 06:54:51.840706 chosen { Oct 3 06:54:51.840706 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan"; Oct 3 06:54:51.852720 #size-cells = <0x00000001>; Oct 3 06:54:51.852720 #address-cells = <0x00000001>; Oct 3 06:54:51.852720 stdout-path = "serial2:115200n8"; Oct 3 06:54:51.864722 module@1 { Oct 3 06:54:51.864722 reg = <0x43300000 0x00b80183>; Oct 3 06:54:51.864722 compatible = "xen,linux-initrd", "xen,multiboot-module"; Oct 3 06:54:51.864722 }; Oct 3 06:54:51.876721 module@0 { Oct 3 06:54:51.876721 bootargs = "ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Oct 3 06:54:51.888741 reg = <0x42000000 0x00993200>; Oct 3 06:54:51.888741 compatible = "xen,linux-zimage", "xen,multiboot-module"; Oct 3 06:54:51.900718 }; Oct 3 06:54:51.900718 }; Oct 3 06:54:51.900718 Booting 0x41000000 - 0x43000000 Oct 3 06:54:51.900718 Kernel image @ 0x41000000 [ 0x000000 - 0x144000 ] Oct 3 06:54:51.900718 ## Flattened Device Tree blob at 43000000 Oct 3 06:54:51.912719 Booting using the fdt blob at 0x43000000 Oct 3 06:54:51.912719 reserving fdt memory region: addr=43000000 size=c000 Oct 3 06:54:51.912719 Loading Device Tree to 4fff1000, end 4fffffff ... OK Oct 3 06:54:51.924696 Oct 3 06:54:51.924696 Starting kernel ...(fake run for tracing) Oct 3 06:54:51.924696 Oct 3 06:54:51.924696 Oct 3 06:54:51.936654 Starting kernel ... Oct 3 06:54:51.936654 Oct 3 06:54:51.936654 __ __ _ _ ____ ___ _ _ _ Oct 3 06:54:51.984715 \ \/ /___ _ __ | || | |___ \ / _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Oct 3 06:54:51.996717 \ // _ \ '_ \ | || |_ __) | | | |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Oct 3 06:54:51.996717 / \ __/ | | | |__ _| / __/| |_| |__| |_| | | | \__ \ || (_| | |_) | | __/ Oct 3 06:54:52.008654 /_/\_\___|_| |_| |_|(_)_____|\___/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Oct 3 06:54:52.008654 Oct 3 06:54:52.008654 (XEN) Xen version 4.20-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Thu Oct 3 04:21:25 UTC 2024 Oct 3 06:54:52.020681 (XEN) Latest ChangeSet: Fri Feb 17 17:01:22 2023 +0000 git:41190d2ceb Oct 3 06:54:52.032721 (XEN) build-id: 0a6b28d2d81aa30d09bfdfdea57218d3715bb897 Oct 3 06:54:52.032721 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Oct 3 06:54:52.044717 (XEN) 32-bit Execution: Oct 3 06:54:52.044717 (XEN) Processor Features: 00001031:00011011 Oct 3 06:54:52.044717 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Oct 3 06:54:52.056720 (XEN) Extensions: GenericTimer Security Oct 3 06:54:52.056720 (XEN) Debug Features: 02010555 Oct 3 06:54:52.056720 (XEN) Auxiliary Features: 00000000 Oct 3 06:54:52.068658 (XEN) Memory Model Features: 10201105 20000000 Oct 3 06:54:52.068658 (XEN) 01240000 02102211 Oct 3 06:54:52.068658 (XEN) ISA Features: 02101110 13112111 21232041 Oct 3 06:54:52.080721 (XEN) 11112131 10011142 00000000 Oct 3 06:54:52.080721 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Oct 3 06:54:52.092682 (XEN) Set SYSRAM to 0000000041000070 (00200070) Oct 3 06:54:52.092682 (XEN) SMP: Allowing 2 CPUs Oct 3 06:54:52.104722 (XEN) enabled workaround for: ARM erratum 766422 Oct 3 06:54:52.104722 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Oct 3 06:54:52.104722 (XEN) GICv2 initialization: Oct 3 06:54:52.116721 (XEN) gic_dist_addr=0000000010481000 Oct 3 06:54:52.116721 (XEN) gic_cpu_addr=0000000010482000 Oct 3 06:54:52.116721 (XEN) gic_hyp_addr=0000000010484000 Oct 3 06:54:52.128686 (XEN) gic_vcpu_addr=0000000010486000 Oct 3 06:54:52.128686 (XEN) gic_maintenance_irq=25 Oct 3 06:54:52.128686 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Oct 3 06:54:52.140675 (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2) Oct 3 06:54:52.140675 (XEN) Initializing Credit2 scheduler Oct 3 06:54:52.140675 (XEN) load_precision_shift: 18 Oct 3 06:54:52.152659 (XEN) load_window_shift: 30 Oct 3 06:54:52.152659 (XEN) underload_balance_tolerance: 0 Oct 3 06:54:52.152659 (XEN) overload_balance_tolerance: -3 Oct 3 06:54:52.152659 (XEN) runqueues arrangement: socket Oct 3 06:54:52.164719 (XEN) cap enforcement granularity: 10ms Oct 3 06:54:52.164719 (XEN) load tracking window length 1073741824 ns Oct 3 06:54:52.164719 (XEN) Allocated console ring of 16 KiB. Oct 3 06:54:52.176720 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Oct 3 06:54:52.176720 (XEN) CPU0: Guest atomics will try 1 times before pausing the domain Oct 3 06:54:52.188689 (XEN) Bringing up CPU1 Oct 3 06:54:52.188689 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Oct 3 06:54:52.188689 (XEN) Brought up 2 CPUs Oct 3 06:54:52.188689 (XEN) CPU 1 booted. Oct 3 06:54:52.200718 (XEN) I/O virtualisation disabled Oct 3 06:54:52.200718 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Oct 3 06:54:52.200718 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Oct 3 06:54:52.212719 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Oct 3 06:54:52.212719 (XEN) Initializing Credit2 scheduler Oct 3 06:54:52.212719 (XEN) load_precision_shift: 18 Oct 3 06:54:52.224720 (XEN) load_window_shift: 30 Oct 3 06:54:52.224720 (XEN) underload_balance_tolerance: 0 Oct 3 06:54:52.224720 (XEN) overload_balance_tolerance: -3 Oct 3 06:54:52.224720 (XEN) runqueues arrangement: socket Oct 3 06:54:52.236719 (XEN) cap enforcement granularity: 10ms Oct 3 06:54:52.236719 (XEN) load tracking window length 1073741824 ns Oct 3 06:54:52.236719 (XEN) Adding cpu 0 to runqueue 0 Oct 3 06:54:52.248713 (XEN) First cpu on runqueue, activating Oct 3 06:54:52.248713 (XEN) Adding cpu 1 to runqueue 0 Oct 3 06:54:52.248713 (XEN) alternatives: Patching with alt table 002d2f0c -> 002d2fe4 Oct 3 06:54:52.260716 (XEN) CPU0 will execute ICIALLU on guest exit Oct 3 06:54:52.260716 (XEN) CPU1 will execute ICIALLU on guest exit Oct 3 06:54:52.260716 (XEN) *** LOADING DOMAIN 0 *** Oct 3 06:54:52.272719 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Oct 3 06:54:52.272719 (XEN) Loading ramdisk from boot module @ 0000000043300000 Oct 3 06:54:52.272719 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Oct 3 06:54:52.284664 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Oct 3 06:54:52.828682 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Oct 3 06:54:52.840668 (XEN) Allocating PPI 16 for event channel interrupt Oct 3 06:54:52.864680 (XEN) d0: extended regions not supported for 32-bit guests Oct 3 06:54:52.876714 (XEN) Loading zImage from 0000000042000000 to 0000000067600000-0000000067f93200 Oct 3 06:54:52.876714 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d80183 Oct 3 06:54:52.972693 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b4c2 Oct 3 06:54:53.068671 (XEN) Initial low memory virq threshold set at 0x4000 pages. Oct 3 06:54:53.080729 (XEN) Scrubbing Free RAM in background Oct 3 06:54:53.080729 (XEN) Std. Loglevel: All Oct 3 06:54:53.080729 (XEN) Guest Loglevel: All Oct 3 06:54:53.092721 (XEN) *************************************************** Oct 3 06:54:53.092721 (XEN) WARNING: SILO mode is not enabled. Oct 3 06:54:53.092721 (XEN) It has implications on the security of the system, Oct 3 06:54:53.104723 (XEN) unless the communications have been forbidden between Oct 3 06:54:53.104723 (XEN) untrusted domains. Oct 3 06:54:53.104723 (XEN) *************************************************** Oct 3 06:54:53.116674 (XEN) 3... 2... 1... Oct 3 06:54:56.120719 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 06:54:56.120719 (XEN) Freed 356kB init memory. Oct 3 06:54:56.120719 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 06:54:57.188664 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Oct 3 06:54:57.200720 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Oct 3 06:54:57.212732 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Oct 3 06:54:57.212732 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Oct 3 06:54:57.224698 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 06:54:57.224698 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 06:54:57.272734 [ 0.000000] Linux version 6.1.112+ (osstest@himrod0) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Thu Oct 3 02:31:58 UTC 2024 Oct 3 06:54:57.284913 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 06:54:57.296735 [ 0.000000] CPU: div instructions available: patching division code Oct 3 06:54:57.296735 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 06:54:57.308739 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 06:54:57.308739 [ 0.000000] Memory policy: Data cache writealloc Oct 3 06:54:57.324877 [ 0.000000] Xen 4.20 support found Oct 3 06:54:57.324940 [ 0.000000] efi: UEFI not found. Oct 3 06:54:57.324985 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 Oct 3 06:54:57.325031 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 06:54:57.336734 [ 0.000000] Zone ranges: Oct 3 06:54:57.336734 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Oct 3 06:54:57.336734 [ 0.000000] Normal empty Oct 3 06:54:57.348845 [ 0.000000] HighMem empty Oct 3 06:54:57.348908 [ 0.000000] Movable zone start for each node Oct 3 06:54:57.348956 [ 0.000000] Early memory node ranges Oct 3 06:54:57.360739 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Oct 3 06:54:57.360739 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Oct 3 06:54:57.372733 [ 0.000000] psci: probing for conduit method from DT. Oct 3 06:54:57.372733 [ 0.000000] psci: PSCIv1.1 detected in firmware. Oct 3 06:54:57.384716 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Oct 3 06:54:57.384716 [ 0.000000] psci: Trusted OS migration not required Oct 3 06:54:57.384716 [ 0.000000] psci: SMC Calling Convention v1.2 Oct 3 06:54:57.396719 [ 0.000000] percpu: Embedded 16 pages/cpu s35412 r8192 d21932 u65536 Oct 3 06:54:57.396719 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 Oct 3 06:54:57.408731 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 06:54:57.424859 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 06:54:57.436735 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Oct 3 06:54:57.436735 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Oct 3 06:54:57.448731 [ 0.000000] Memory: 416844K/524288K available (14336K kernel code, 2180K rwdata, 5604K rodata, 2048K init, 438K bss, 41908K reserved, 65536K cma-reserved, 0K highmem) Oct 3 06:54:57.460727 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 06:54:57.472734 [ 0.000000] trace event string verifier disabled Oct 3 06:54:57.472734 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 06:54:57.484734 [ 0.000000] rcu: RCU event tracing is enabled. Oct 3 06:54:57.484734 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Oct 3 06:54:57.484734 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Oct 3 06:54:57.496719 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 06:54:57.508732 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 06:54:57.508732 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 06:54:57.520732 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 06:54:57.520732 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Oct 3 06:54:57.532731 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 06:54:57.544733 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 06:54:57.544733 [ 0.000012] Switching to timer-based delay loop, resolution 41ns Oct 3 06:54:57.556861 [ 0.000500] Console: colour dummy device 80x30 Oct 3 06:54:57.556927 [ 0.293139] printk: console [hvc0] enabled Oct 3 06:54:57.568729 [ 0.297330] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Oct 3 06:54:57.568729 [ 0.307730] CPU: Testing write buffer coherency: ok Oct 3 06:54:57.580730 [ 0.312673] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 06:54:57.592731 [ 0.322226] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 06:54:57.592731 [ 0.328640] pid_max: default: 32768 minimum: 301 Oct 3 06:54:57.602600 [ 0.333435] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 06:54:57.602675 [ 0.340707] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 06:54:57.616750 [ 0.349117] /cpus/cpu@0 missing clock-frequency property Oct 3 06:54:57.616750 [ 0.353910] /cpus/cpu@1 missing clock-frequency property Oct 3 06:54:57.628730 [ 0.359305] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 06:54:57.628730 [ 0.365815] xen:grant_table: Grant tables using version 1 layout Oct 3 06:54:57.640715 [ 0.371154] Grant table initialized Oct 3 06:54:57.640715 [ 0.374693] xen:events: Using FIFO-based ABI Oct 3 06:54:57.640715 [ 0.379012] Xen: initializing cpu0 Oct 3 06:54:57.652726 [ 0.382540] Setting up static identity map for 0x60300000 - 0x603000ac Oct 3 06:54:57.652726 [ 0.390299] rcu: Hierarchical SRCU implementation. Oct 3 06:54:57.664723 [ 0.393927] rcu: Max phase no-delay instances is 1000. Oct 3 06:54:57.664723 [ 0.401996] EFI services will not be available. Oct 3 06:54:57.676672 [ 0.405300] smp: Bringing up secondary CPUs ... Oct 3 06:54:57.676672 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 06:54:57.748728 [ 0.479758] Xen: initializing cpu1 Oct 3 06:54:57.748728 [ 0.479918] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 06:54:57.748728 [ 0.479947] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 06:54:57.760735 [ 0.498817] smp: Brought up 1 node, 2 CPUs Oct 3 06:54:57.772736 [ 0.502588] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 06:54:57.772736 [ 0.508899] CPU: All CPU(s) started in SVC mode. Oct 3 06:54:57.784674 [ 0.514305] devtmpfs: initialized Oct 3 06:54:57.784674 [ 0.526897] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 06:54:57.796688 [ 0.533393] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Oct 3 06:54:57.808731 [ 0.543113] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 06:54:57.824727 [ 0.551138] pinctrl core: initialized pinctrl subsystem Oct 3 06:54:57.824884 [ 0.557670] DMI not present or invalid. Oct 3 06:54:57.824933 [ 0.560780] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 06:54:57.836716 [ 0.567956] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 06:54:57.836716 [ 0.576739] thermal_sys: Registered thermal governor 'step_wise' Oct 3 06:54:57.848732 [ 0.576869] software IO TLB: area num 2. Oct 3 06:54:57.848732 [ 0.585553] software IO TLB: only able to allocate 8 MB Oct 3 06:54:57.860729 [ 0.592683] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Oct 3 06:54:57.860729 [ 0.597866] No ATAGs? Oct 3 06:54:57.860729 [ 0.600214] hw-breakpoint: Failed to enable monitor mode on CPU 0. Oct 3 06:54:57.872719 [ 0.608741] Serial: AMBA PL011 UART driver Oct 3 06:54:57.872719 [ 0.640912] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 62 Oct 3 06:54:57.908689 [ 0.690263] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 06:54:57.956693 [ 0.716179] xen:balloon: Initialising balloon driver Oct 3 06:54:57.980682 [ 0.723696] iommu: Default domain type: Translated Oct 3 06:54:57.992721 [ 0.727200] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 06:54:58.004731 [ 0.734154] SCSI subsystem initialized Oct 3 06:54:58.004731 [ 0.737714] usbcore: registered new interface driver usbfs Oct 3 06:54:58.004731 [ 0.742946] usbcore: registered new interface driver hub Oct 3 06:54:58.016734 [ 0.748362] usbcore: registered new device driver usb Oct 3 06:54:58.016734 [ 0.754964] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 06:54:58.028875 [ 0.758592] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 06:54:58.028945 [ 0.764880] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 06:54:58.040709 [ 0.773325] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 06:54:58.052733 [ 0.782465] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 06:54:58.052733 [ 0.787980] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 06:54:58.052733 [ 0.792669] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 06:54:58.064732 [ 0.798926] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 06:54:58.064732 [ 0.804145] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 06:54:58.076719 [ 0.808919] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 06:54:58.076719 [ 0.815037] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 06:54:58.088732 [ 0.820214] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 06:54:58.088732 [ 0.825130] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 06:54:58.100732 [ 0.831165] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 06:54:58.100732 [ 0.836934] pps_core: LinuxPPS API ver. 1 registered Oct 3 06:54:58.112733 [ 0.841372] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 06:54:58.112733 [ 0.850574] PTP clock support registered Oct 3 06:54:58.124790 [ 0.862353] EDAC MC: Ver: 3.0.0 Oct 3 06:54:58.124854 [ 0.872273] vgaarb: loaded Oct 3 06:54:58.136675 [ 0.877904] clocksource: Switched to clocksource arch_sys_counter Oct 3 06:54:58.148696 [ 0.889376] NET: Registered PF_INET protocol family Oct 3 06:54:58.160735 [ 0.893014] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Oct 3 06:54:58.160735 [ 0.900919] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 06:54:58.172709 [ 0.908631] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 06:54:58.184734 [ 0.916403] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Oct 3 06:54:58.184734 [ 0.924254] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Oct 3 06:54:58.196731 [ 0.931540] TCP: Hash tables configured (established 4096 bind 4096) Oct 3 06:54:58.208733 [ 0.937903] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 06:54:58.208733 [ 0.944449] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 06:54:58.220688 [ 0.951587] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 06:54:58.220688 [ 0.968116] RPC: Registered named UNIX socket transport module. Oct 3 06:54:58.232700 [ 0.972662] RPC: Registered udp transport module. Oct 3 06:54:58.244730 [ 0.977435] RPC: Registered tcp transport module. Oct 3 06:54:58.244730 [ 0.982225] RPC: Registered tcp NFSv4.1 backchannel transport module. Oct 3 06:54:58.256730 [ 0.988754] PCI: CLS 0 bytes, default 64 Oct 3 06:54:58.256730 [ 0.994028] Initialise system trusted keyrings Oct 3 06:54:58.268735 [ 0.997375] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Oct 3 06:54:58.268735 [ 0.999759] Trying to unpack rootfs image as initramfs... Oct 3 06:54:58.280696 [ 1.011664] squashfs: version 4.0 (2009/01/31) Phillip Lougher Oct 3 06:54:58.280696 [ 1.043348] NFS: Registering the id_resolver key type Oct 3 06:54:58.316714 [ 1.047065] Key type id_resolver registered Oct 3 06:54:58.316714 [ 1.051336] Key type id_legacy registered Oct 3 06:54:58.316714 [ 1.055476] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Oct 3 06:54:58.328854 [ 1.062180] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Oct 3 06:54:58.340656 [ 1.085749] Key type asymmetric registered Oct 3 06:54:58.352835 [ 1.088537] Asymmetric key parser 'x509' registered Oct 3 06:54:58.364882 [ 1.093574] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 06:54:58.364952 [ 1.100919] io scheduler mq-deadline registered Oct 3 06:54:58.376835 [ 1.105498] io scheduler kyber registered Oct 3 06:54:58.376895 [ 1.121791] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 06:54:58.388869 [ 1.173860] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 06:54:58.448900 [ 1.180123] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 06:54:58.460858 [ 1.194994] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 06:54:58.472874 [ 1.201231] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 06:54:58.472949 [ 1.215077] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 06:54:58.484906 [ 1.221319] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 06:54:58.496902 [ 1.235802] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 06:54:58.508909 [ 1.242036] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 06:54:58.520858 [ 1.256751] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 06:54:58.532864 [ 1.268161] xen:xen_evtchn: Event-channel device installed Oct 3 06:54:58.532926 [ 1.319446] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 06:54:58.592873 [ 1.328151] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 113, base_baud = 0) is a S3C6400/10 Oct 3 06:54:58.604893 [ 1.336313] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 114, base_baud = 0) is a S3C6400/10 Oct 3 06:54:58.604964 [ 1.345290] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 115, base_baud = 0) is a S3C6400/10 Oct 3 06:54:58.616900 [ 1.354709] SuperH (H)SCI(F) driver initialized Oct 3 06:54:58.628874 [ 1.359621] STMicroelectronics ASC driver initialized Oct 3 06:54:58.628936 [ 1.364813] STM32 USART driver initialized Oct 3 06:54:58.628982 [ 1.388147] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 06:54:58.664822 [ 1.512991] brd: module loaded Oct 3 06:54:58.784753 [ 1.532693] loop: module loaded Oct 3 06:54:58.796674 [ 1.594406] Freeing initrd memory: 11780K Oct 3 06:54:58.860682 [ 1.609177] Invalid max_queues (4), will use default max: 2. Oct 3 06:54:58.884696 [ 1.635306] tun: Universal TUN/TAP device driver, 1.6 Oct 3 06:54:58.908730 [ 1.639382] CAN device driver interface Oct 3 06:54:58.908730 [ 1.644259] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Oct 3 06:54:58.908730 [ 1.654703] xen_netfront: Initialising Xen virtual ethernet driver Oct 3 06:54:58.920699 [ 1.659591] pegasus: Pegasus/Pegasus II USB Ethernet driver Oct 3 06:54:58.932737 [ 1.665171] usbcore: registered new interface driver pegasus Oct 3 06:54:58.932737 [ 1.670913] usbcore: registered new interface driver asix Oct 3 06:54:58.944711 [ 1.676368] usbcore: registered new interface driver ax88179_178a Oct 3 06:54:58.944711 [ 1.682547] usbcore: registered new interface driver cdc_ether Oct 3 06:54:58.956837 [ 1.688449] usbcore: registered new interface driver smsc75xx Oct 3 06:54:58.956905 [ 1.694256] usbcore: registered new interface driver smsc95xx Oct 3 06:54:58.968836 [ 1.700073] usbcore: registered new interface driver net1080 Oct 3 06:54:58.968901 [ 1.705794] usbcore: registered new interface driver cdc_subset Oct 3 06:54:58.980733 [ 1.711795] usbcore: registered new interface driver zaurus Oct 3 06:54:58.980733 [ 1.717434] usbcore: registered new interface driver cdc_ncm Oct 3 06:54:58.992692 [ 1.726649] usbcore: registered new interface driver usb-storage Oct 3 06:54:58.992692 [ 1.760906] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 06:54:59.028799 [ 1.769615] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T06:54:59 UTC (1727938499) Oct 3 06:54:59.040792 [ 1.778246] i2c_dev: i2c /dev entries driver Oct 3 06:54:59.052657 [ 1.818235] syscon-poweroff 10040000.system-controller:syscon-poweroff: pm_power_off already claimed for psci_sys_poweroff Oct 3 06:54:59.088718 [ 1.827963] syscon-poweroff: probe of 10040000.system-controller:syscon-poweroff failed with error -16 Oct 3 06:54:59.100729 [ 1.839221] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 06:54:59.112687 [ 1.850075] device-mapper: uevent: version 1.0.3 Oct 3 06:54:59.124731 [ 1.853550] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Oct 3 06:54:59.124731 [ 1.862531] cpu cpu0: OPP table can't be empty Oct 3 06:54:59.136714 [ 1.867552] failed to register cpuidle driver Oct 3 06:54:59.136714 [ 1.870788] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Oct 3 06:54:59.148767 [ 1.879114] sdhci: Secure Digital Host Controller Interface driver Oct 3 06:54:59.148767 [ 1.884132] sdhci: Copyright(c) Pierre Ossman Oct 3 06:54:59.148767 [ 1.892161] sdhci-pltfm: SDHCI platform and OF driver helper Oct 3 06:54:59.160708 [ 1.899872] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 06:54:59.172729 [ 1.905163] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Oct 3 06:54:59.172729 [ 1.911797] usbcore: registered new interface driver usbhid Oct 3 06:54:59.184711 [ 1.916668] usbhid: USB HID core driver Oct 3 06:54:59.184711 [ 1.927468] NET: Registered PF_INET6 protocol family Oct 3 06:54:59.196729 [ 1.932087] Segment Routing with IPv6 Oct 3 06:54:59.196729 [ 1.934823] In-situ OAM (IOAM) with IPv6 Oct 3 06:54:59.208716 [ 1.938894] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Oct 3 06:54:59.208716 [ 1.945217] NET: Registered PF_PACKET protocol family Oct 3 06:54:59.220732 [ 1.949948] can: controller area network core Oct 3 06:54:59.220732 [ 1.954358] NET: Registered PF_CAN protocol family Oct 3 06:54:59.220732 [ 1.959209] can: raw protocol Oct 3 06:54:59.232730 [ 1.962220] can: broadcast manager protocol Oct 3 06:54:59.232730 [ 1.966477] can: netlink gateway - max_hops=1 Oct 3 06:54:59.232730 [ 1.971200] Key type dns_resolver registered Oct 3 06:54:59.244735 [ 1.975839] ThumbEE CPU extension supported. Oct 3 06:54:59.244735 [ 1.979625] Registering SWP/SWPB emulation handler Oct 3 06:54:59.244735 [ 1.984891] Loading compiled-in X.509 certificates Oct 3 06:54:59.256672 [ 2.013326] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 06:54:59.280718 [ 2.019453] clk: Not disabling unused clocks Oct 3 06:54:59.292725 [ 2.026448] Freeing unused kernel image (initmem) memory: 2048K Oct 3 06:54:59.292725 [ 2.032583] Run /init as init process Oct 3 06:54:59.304780 Loading, please wait... Oct 3 06:54:59.328707 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 06:54:59.400648 [ 3.486751] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 06:55:00.764716 [ 3.493893] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 06:55:00.764716 [ 3.515060] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 06:55:00.788667 [ 3.541313] phy phy-12130000.phy.9: phy_power_on was called before phy_init Oct 3 06:55:00.812727 [ 3.546935] exynos-ohci 12120000.usb: USB Host Controller Oct 3 06:55:00.812727 [ 3.552415] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Oct 3 06:55:00.828673 [ 3.573628] Synopsys Designware Multimedia Card Interface Driver Oct 3 06:55:00.840696 [ 3.581443] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 Oct 3 06:55:00.852687 [ 3.597830] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 06:55:00.864707 [ 3.598150] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 06:55:00.876730 [ 3.612109] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 06:55:00.888721 [ 3.617192] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 06:55:00.888721 [ 3.622773] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo Oct 3 06:55:00.900714 [ 3.632356] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 06:55:00.900714 [ 3.639352] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 06:55:00.912729 [ 3.645338] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 127,32 bit host data width,128 deep fifo Oct 3 06:55:00.924584 [ 3.667917] hub 1-0:1.0: USB hub found Oct 3 06:55:00.936633 [ 3.670340] hub 1-0:1.0: 3 ports detected Oct 3 06:55:00.936633 [ 3.702326] phy phy-12130000.phy.9: phy_power_on was called before phy_init Oct 3 06:55:00.972729 [ 3.707956] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 06:55:00.984726 [ 3.713491] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Oct 3 06:55:00.984726 [ 3.722699] mmc_host mmc0: card is polling. Oct 3 06:55:00.996709 [ 3.722804] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 06:55:00.996709 [ 3.737111] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 06:55:01.008722 [ 3.745499] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 06:55:01.027211 [ 3.745598] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 06:55:01.032682 [ 3.762236] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 Oct 3 06:55:01.032682 [ 3.788520] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 06:55:01.056719 [ 3.794197] hub 2-0:1.0: USB hub found Oct 3 06:55:01.056719 [ 3.797044] hub 2-0:1.0: 3 ports detected Oct 3 06:55:01.068711 [ 3.803555] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 06:55:01.080709 [ 3.817860] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 06:55:01.092663 [ 3.845315] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 06:55:01.116741 [ 3.851072] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Oct 3 06:55:01.128731 [ 3.860232] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 06:55:01.140641 [ 3.895459] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Oct 3 06:55:01.164704 [ 3.899981] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 06:55:01.176728 [ 3.910180] scsi host0: ahci-dwc Oct 3 06:55:01.176728 [ 3.910407] s3c-rtc 101e0000.rtc: registered as rtc1 Oct 3 06:55:01.188702 [ 3.913275] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 128 Oct 3 06:55:01.188702 [ 3.930011] mmc0: new DDR MMC card at address 0001 Oct 3 06:55:01.200695 [ 3.947743] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Oct 3 06:55:01.212679 [ 3.956777] mmcblk0: p1 p2 p3 p4 Oct 3 06:55:01.224684 [ 3.959970] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Oct 3 06:55:01.224684 [ 3.972028] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Oct 3 06:55:01.236690 [ 4.001644] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Oct 3 06:55:01.272696 [ 4.035611] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 06:55:01.308698 [ 4.052498] mmc1: new high speed SDHC card at address aaaa Oct 3 06:55:01.320725 [ 4.065739] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Oct 3 06:55:01.332683 [ 4.437963] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 06:55:01.708737 [ 4.443734] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 06:55:01.720924 [ 4.449600] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 06:55:01.721001 [ 4.457398] ata1.00: configured for UDMA/133 Oct 3 06:55:01.721049 [ 4.463879] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 06:55:01.732906 [ 4.473750] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 06:55:01.744856 [ 4.479943] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 06:55:01.756890 [ 4.485329] sd 0:0:0:0: [sda] Write Protect is off Oct 3 06:55:01.756953 [ 4.490515] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 06:55:01.768826 [ 4.499565] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 06:55:01.768890 [ 4.519512] sda: sda1 sda2 < sda5 > Oct 3 06:55:01.792819 [ 4.522591] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 06:55:01.792881 [ 4.535016] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 06:55:01.804856 [ 4.583395] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Oct 3 06:55:01.852937 [ 4.590587] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 06:55:01.864891 [ 4.594815] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 06:55:01.864961 [ 4.603774] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 06:55:01.876894 [ 4.612237] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Oct 3 06:55:01.888874 [ 4.618410] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 06:55:01.888937 [ 4.623572] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 06:55:01.900841 [ 4.631369] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 06:55:01.900905 [ 4.638918] hub 3-0:1.0: USB hub found Oct 3 06:55:01.912914 [ 4.641749] hub 3-0:1.0: 1 port detected Oct 3 06:55:01.912974 [ 4.646568] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 06:55:01.924871 [ 4.658255] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 06:55:01.936795 [ 4.682405] hub 4-0:1.0: USB hub found Oct 3 06:55:01.948878 [ 4.685666] hub 4-0:1.0: 1 port detected Oct 3 06:55:01.948937 [ 4.733915] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 06:55:02.008857 [ 4.842866] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:55:02.116889 [ 4.950987] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:55:02.224863 [ 5.059084] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:55:02.332839 [ 5.167145] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:55:02.444834 [ 5.275214] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:55:02.552831 [ 5.383281] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:55:02.660827 [ 5.491354] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:55:02.768838 [ 5.599421] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:55:02.876830 [ 6.008113] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 06:55:03.284846 [ 6.115823] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 06:55:03.392826 [ 6.724149] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 06:55:03.996860 [ 7.147909] random: crng init done Oct 3 06:55:04.416845 Begin: Loading essential drivers ... done. Oct 3 06:55:04.984815 Begin: Running /scripts/init-premount ... done. Oct 3 06:55:08.004848 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 06:55:08.004880 Begin: Running /scripts/local-premount ... done. Oct 3 06:55:08.016652 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 06:55:08.088788 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 06:55:08.172693 /dev/mapper/arndale--westfield--vg-root: clean, 46037/1220608 files, 606552/4882432 blocks Oct 3 06:55:08.376713 done. Oct 3 06:55:08.388700 [ 11.124683] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 06:55:08.400660 [ 11.437519] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 06:55:08.701791 done. Oct 3 06:55:08.713700 Begin: Running /scripts/local-bottom ... done. Oct 3 06:55:08.787836 Begin: Running /scripts/init-bottom ... done. Oct 3 06:55:08.836674 INIT: version 3.06 booting Oct 3 06:55:09.292200 INIT: No inittab.d directory found Oct 3 06:55:09.363880 Using makefile-style concurrent boot in runlevel S. Oct 3 06:55:09.628800 Starting hotplug events dispatcher: systemd-udevd. Oct 3 06:55:11.237617 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 06:55:11.681620 Synthesizing the initial hotplug events (devices)...[ 14.736760] wm8994 3-001a: Device is not a WM8994, ID is 0 Oct 3 06:55:12.005683 [ 14.745855] wm8994: probe of 3-001a failed with error -22 Oct 3 06:55:12.017666 done. Oct 3 06:55:12.593647 Waiting for /dev to be fully populated...[ 15.419888] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Oct 3 06:55:12.689744 [ 15.435071] s5p-secss 10830000.sss: s5p-sss driver registered Oct 3 06:55:12.701734 [ 15.441123] mc: Linux media interface: v0.10 Oct 3 06:55:12.713685 [ 15.573887] videodev: Linux video capture interface: v2.00 Oct 3 06:55:12.845704 [ 15.818567] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 06:55:13.097744 [ 15.828132] exynos-gsc 13e00000.gsc: Adding to iommu group 0 Oct 3 06:55:13.097808 [ 15.833540] exynos-gsc 13e10000.gsc: Adding to iommu group 1 Oct 3 06:55:13.109702 [ 15.838985] exynos-gsc 13e20000.gsc: Adding to iommu group 2 Oct 3 06:55:13.109766 [ 15.859935] exynos-gsc 13e30000.gsc: Adding to iommu group 3 Oct 3 06:55:13.133729 [ 15.864605] s5p-mfc 11000000.codec: Adding to iommu group 4 Oct 3 06:55:13.133792 [ 15.916770] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 06:55:13.193688 [ 15.988130] usb3503 usb-hub: switched to HUB mode Oct 3 06:55:13.253711 [ 15.991522] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 06:55:13.265732 [ 16.002462] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Oct 3 06:55:13.277698 [ 16.031095] blk_print_req_error: 6 callbacks suppressed Oct 3 06:55:13.301760 [ 16.031106] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:55:13.313692 [ 16.093334] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 06:55:13.361753 [ 16.102297] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 06:55:13.373754 [ 16.109793] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 06:55:13.385765 [ 16.121082] s5p-mfc 11000000.codec: decoder registered as /dev/video4 Oct 3 06:55:13.397698 [ 16.126855] s5p-mfc 11000000.codec: encoder registered as /dev/video5 Oct 3 06:55:13.397763 [ 16.145643] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:55:13.421713 [ 16.254985] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:55:13.529720 [ 16.348419] usb 2-3: new high-speed USB device number 2 using exynos-ehci Oct 3 06:55:13.625690 [ 16.364069] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:55:13.637735 [ 16.388563] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Oct 3 06:55:13.661712 [ 16.472863] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:55:13.745711 [ 16.569177] hub 2-3:1.0: USB hub found Oct 3 06:55:13.841735 [ 16.571869] hub 2-3:1.0: 3 ports detected Oct 3 06:55:13.841796 [ 16.581847] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:55:13.853742 [ 16.690152] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:55:13.961747 [ 16.798667] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 06:55:14.069744 [ 16.837981] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 06:55:14.105778 [ 16.845617] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 06:55:14.117719 [ 16.854409] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 06:55:14.129747 [ 16.868060] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 06:55:14.141759 [ 16.875732] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 06:55:14.153747 [ 16.884500] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 06:55:14.165664 [ 16.927985] usb 2-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 06:55:14.201700 [ 17.100582] hub 2-3.2:1.0: USB hub found Oct 3 06:55:14.369730 [ 17.103552] hub 2-3.2:1.0: 4 ports detected Oct 3 06:55:14.369790 [ 17.177821] usbcore: registered new device driver onboard-usb-hub Oct 3 06:55:14.453678 [ 17.207763] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 06:55:14.477753 [ 17.298774] hub 2-3.2:1.0: USB hub found Oct 3 06:55:14.561694 [ 17.301715] hub 2-3.2:1.0: 4 ports detected Oct 3 06:55:14.573713 [ 17.312576] hub 2-3.2:1.0: USB hub found Oct 3 06:55:14.585763 [ 17.315650] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 06:55:14.585837 [ 17.317153] hub 2-3.2:1.0: 4 ports detected Oct 3 06:55:14.597690 [ 17.647932] usb 2-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 06:55:14.921681 [ 17.802334] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 06:55:15.077696 [ 17.924973] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 06:55:15.197703 [ 18.509954] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 06:55:15.785747 [ 18.524826] Asix Electronics AX88772A usb-002:004:10: attached PHY driver (mii_bus:phy_addr=usb-002:004:10, irq=POLL) Oct 3 06:55:15.797777 [ 18.534663] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 7a:88:0f:48:68:15 Oct 3 06:55:15.809700 done. Oct 3 06:55:16.049690 [ 19.152783] EXT4-fs (dm-0): re-mounted. Quota mode: disabled. Oct 3 06:55:16.421721 Checking file systems.../dev/sda1: clean, 2105/61056 files, 43351/243968 blocks Oct 3 06:55:17.933724 done. Oct 3 06:55:17.981705 Cleaning up temporary files... /tmp. Oct 3 06:55:18.209701 [ 21.143848] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 06:55:18.413736 [ 21.192554] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 06:55:18.461745 [ 21.288053] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k Oct 3 06:55:18.557763 Mounting local filesystems...done. Oct 3 06:55:18.797696 Activating swapfile swap, if any...done. Oct 3 06:55:18.797756 Cleaning up temporary files.... Oct 3 06:55:18.833686 Starting Setting kernel variables: sysctl. Oct 3 06:55:18.989675 [ 23.081912] xenbr0: port 1(eth0) entered blocking state Oct 3 06:55:20.345709 [ 23.085798] xenbr0: port 1(eth0) entered disabled state Oct 3 06:55:20.357734 [ 23.091239] device eth0 entered promiscuous mode Oct 3 06:55:20.357796 [ 23.101035] asix 2-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 06:55:20.369653 Configuring network interfaces...RTNETLINK answers: Operation not supported Oct 3 06:55:22.233699 Oct 3 06:55:22.233753 Waiting for xenbr0 to get ready (MAXWAIT is 2 seconds). Oct 3 06:55:22.233803 [ 25.295058] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 06:55:22.569767 [ 25.295105] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 3 06:55:22.569854 [ 25.307405] xenbr0: port 1(eth0) entered blocking state Oct 3 06:55:22.581737 [ 25.312666] xenbr0: port 1(eth0) entered forwarding state Oct 3 06:55:22.581799 [ 25.318215] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready Oct 3 06:55:22.593689 done. Oct 3 06:55:22.749672 Cleaning up temporary files.... Oct 3 06:55:22.821684 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Oct 3 06:55:22.869768 Starting nftables: none Oct 3 06:55:22.905684 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Oct 3 06:55:22.993742 failed! Oct 3 06:55:22.993797 startpar: service(s) returned failure: nftables ... failed! Oct 3 06:55:22.994315 INIT: Entering runlevel: 2 Oct 3 06:55:23.005685 Using makefile-style concurrent boot in runlevel 2. Oct 3 06:55:23.017715 Starting Apache httpd web server: apache2AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.149.64.45. Set the 'ServerName' directive globally to suppress this message Oct 3 06:55:23.833768 . Oct 3 06:55:24.901677 Starting NTP server: ntpd2024-10-03T06:55:26 ntpd[1145]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 06:55:25.309775 2024-10-03T06:55:26 ntpd[1145]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 06:55:25.321728 . Oct 3 06:55:25.321779 Starting SMP IRQ Balancer: irqbalance. Oct 3 06:55:25.681743 Starting system message bus: dbus. Oct 3 06:55:25.849688 Starting OpenBSD Secure Shell server: sshd. Oct 3 06:55:26.705761 Starting /usr/local/sbin/oxenstored.... Oct 3 06:55:29.741838 Setting domain 0 name, domid and JSON config... Oct 3 06:55:29.741921 Done setting up Dom0 Oct 3 06:55:29.753711 Starting xenconsoled... Oct 3 06:55:29.753768 Starting QEMU as disk backend for dom0 Oct 3 06:55:29.753815 Oct 3 06:55:31.061730 Debian GNU/Linux 12 arndale-westfield hvc0 Oct 3 06:55:31.073695 Oct 3 06:55:31.073748 arndale-westfield login: Oct 3 06:55:32.962541 (XEN) *** Serial input to Xen (type 'CTRL-x' three times to switch input) Oct 3 06:55:32.985778 Oct 3 06:55:32.987138 Oct 3 06:55:33.962202 (XEN) '0' pressed -> dumping Dom0's registers Oct 3 06:55:33.977815 (XEN) *** Dumping Dom0 vcpu#0 state: *** Oct 3 06:55:33.977876 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Oct 3 06:55:33.980209 Not tainted ]---- Oct 3 06:55:33.989767 (XEN) CPU: 0 Oct 3 06:55:33.989821 (XEN) PC: c031ce28 Oct 3 06:55:33.989864 (XEN) CPSR: 60010093 MODE:32-bit Guest SVC Oct 3 06:55:33.989910 (XEN) R0: 00000005 R1: 00000000 R2: 00019ee1 R3: c031ce20 Oct 3 06:55:34.001781 (XEN) R4: c1909d80 R5: c1b12200 R6: c1904d1c R7: c1904d78 Oct 3 06:55:34.001843 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c00 Oct 3 06:55:34.013828 (XEN) USR: SP: be953948 LR: b6bcd893 Oct 3 06:55:34.013887 (XEN) SVC: SP: c1901f40 LR: c0308df0 SPSR:60010013 Oct 3 06:55:34.013934 (XEN) ABT: SP: c1b22b10 LR: c0300ea0 SPSR:60000193 Oct 3 06:55:34.025811 (XEN) UND: SP: c1b22b20 LR: c0300fa0 SPSR:60010093 Oct 3 06:55:34.025871 (XEN) IRQ: SP: c1b22b00 LR: c0300ba0 SPSR:60010193 Oct 3 06:55:34.037753 (XEN) FIQ: SP: c1b22b30 LR: c1b22b30 SPSR:00000000 Oct 3 06:55:34.037814 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 06:55:34.037864 (XEN) Oct 3 06:55:34.049762 (XEN) SCTLR: 10c5387d Oct 3 06:55:34.049819 (XEN) TCR: 00000000 Oct 3 06:55:34.049863 (XEN) TTBR0: 0000000064e9406a Oct 3 06:55:34.049906 (XEN) TTBR1: 000000006020406a Oct 3 06:55:34.049949 (XEN) IFAR: b6fb3c34, IFSR: 00000007 Oct 3 06:55:34.061763 (XEN) DFAR: 00523288, DFSR: 0000081f Oct 3 06:55:34.061821 (XEN) Oct 3 06:55:34.061861 (XEN) VTCR_EL2: 80003558 Oct 3 06:55:34.061903 (XEN) VTTBR_EL2: 00010000bef8a000 Oct 3 06:55:34.073789 (XEN) Oct 3 06:55:34.073843 (XEN) SCTLR_EL2: 30cd187f Oct 3 06:55:34.073888 (XEN) HCR_EL2: 007c663f Oct 3 06:55:34.073930 (XEN) TTBR0_EL2: 000000004111d000 Oct 3 06:55:34.073973 (XEN) Oct 3 06:55:34.074011 (XEN) ESR_EL2: 07e00000 Oct 3 06:55:34.085744 (XEN) HPFAR_EL2: 00104810 Oct 3 06:55:34.085800 (XEN) HDFAR: e0807f00 Oct 3 06:55:34.085843 (XEN) HIFAR: c042b7a4 Oct 3 06:55:34.085885 (XEN) Oct 3 06:55:34.085923 (XEN) Guest stack trace from sp=c1901f40: Oct 3 06:55:34.097711 (XEN) Failed to convert stack to physical address Oct 3 06:55:34.097772 (XEN) *** Dumping Dom0 vcpu#1 state: *** Oct 3 06:55:34.097818 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 06:55:34.109773 (XEN) CPU: 0 Oct 3 06:55:34.109827 (XEN) PC: c031ce28 Oct 3 06:55:34.109870 (XEN) CPSR: 600f0093 MODE:32-bit Guest SVC Oct 3 06:55:34.109915 (XEN) R0: 00000005 R1: 00000000 R2: 00058109 R3: c031ce20 Oct 3 06:55:34.121803 (XEN) R4: c210e600 R5: c1b12200 R6: c1904d1c R7: c1904d78 Oct 3 06:55:34.121866 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c00 Oct 3 06:55:34.133767 (XEN) USR: SP: bed0a970 LR: b6e646c5 Oct 3 06:55:34.133825 (XEN) SVC: SP: e08c9f90 LR: c0308df0 SPSR:600f0013 Oct 3 06:55:34.133872 (XEN) ABT: SP: c1b22b50 LR: c0300b20 SPSR:60030193 Oct 3 06:55:34.145780 (XEN) UND: SP: c1b22b60 LR: c0300fa0 SPSR:60030093 Oct 3 06:55:34.145840 (XEN) IRQ: SP: c1b22b40 LR: c0300ba0 SPSR:600f0193 Oct 3 06:55:34.157761 (XEN) FIQ: SP: c1b22b70 LR: c1b22b70 SPSR:00000000 Oct 3 06:55:34.157821 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 06:55:34.169747 (XEN) Oct 3 06:55:34.169800 (XEN) SCTLR: 10c5387d Oct 3 06:55:34.169844 (XEN) TCR: 00000000 Oct 3 06:55:34.169886 (XEN) TTBR0: 000000006520c06a Oct 3 06:55:34.169928 (XEN) TTBR1: 000000006020406a Oct 3 06:55:34.181752 (XEN) IFAR: b6fb3c34, IFSR: 00000007 Oct 3 06:55:34.181811 (XEN) DFAR: 005ed017, DFSR: 0000081f Oct 3 06:55:34.181857 (XEN) Oct 3 06:55:34.181895 (XEN) VTCR_EL2: 80003558 Oct 3 06:55:34.181937 (XEN) VTTBR_EL2: 00010000bef8a000 Oct 3 06:55:34.193759 (XEN) Oct 3 06:55:34.193811 (XEN) SCTLR_EL2: 30cd187f Oct 3 06:55:34.193855 (XEN) HCR_EL2: 007c663f Oct 3 06:55:34.193897 (XEN) TTBR0_EL2: 000000004111d000 Oct 3 06:55:34.193940 (XEN) Oct 3 06:55:34.193978 (XEN) ESR_EL2: 07e00000 Oct 3 06:55:34.205762 (XEN) HPFAR_EL2: 00104810 Oct 3 06:55:34.205819 (XEN) HDFAR: e0807f00 Oct 3 06:55:34.205863 (XEN) HIFAR: c042b7a4 Oct 3 06:55:34.205904 (XEN) Oct 3 06:55:34.205942 (XEN) Guest stack trace from sp=e08c9f90: Oct 3 06:55:34.217715 (XEN) Failed to convert stack to physical address Oct 3 06:55:34.217775 Oct 3 06:55:35.966321 (XEN) 'H' pressed -> dumping heap info (now = 44005108958) Oct 3 06:55:35.985856 (XEN) heap[node=0][zone=0] -> 16283 pages Oct 3 06:55:35.985916 (XEN) heap[node=0][zone=1] -> 0 p Oct 3 06:55:35.988423 ages Oct 3 06:55:35.997709 (XEN) heap[node=0][zone=2] -> 0 pages Oct 3 06:55:35.997765 (XEN) heap[node=0][zone=3] -> 0 pages Oct 3 06:55:35.997810 (XEN) heap[node=0][zone=4] -> 0 pages Oct 3 06:55:35.997853 (XEN) heap[node=0][zone=5] -> 0 pages Oct 3 06:55:36.009763 (XEN) heap[node=0][zone=6] -> 0 pages Oct 3 06:55:36.009821 (XEN) heap[node=0][zone=7] -> 0 pages Oct 3 06:55:36.009866 (XEN) heap[node=0][zone=8] -> 0 pages Oct 3 06:55:36.021772 (XEN) heap[node=0][zone=9] -> 0 pages Oct 3 06:55:36.021831 (XEN) heap[node=0][zone=10] -> 0 pages Oct 3 06:55:36.021876 (XEN) heap[node=0][zone=11] -> 0 pages Oct 3 06:55:36.021920 (XEN) heap[node=0][zone=12] -> 0 pages Oct 3 06:55:36.033780 (XEN) heap[node=0][zone=13] -> 0 pages Oct 3 06:55:36.033839 (XEN) heap[node=0][zone=14] -> 0 pages Oct 3 06:55:36.033884 (XEN) heap[node=0][zone=15] -> 0 pages Oct 3 06:55:36.045766 (XEN) heap[node=0][zone=16] -> 0 pages Oct 3 06:55:36.045827 (XEN) heap[node=0][zone=17] -> 0 pages Oct 3 06:55:36.045872 (XEN) heap[node=0][zone=18] -> 0 pages Oct 3 06:55:36.045915 (XEN) heap[node=0][zone=19] -> 130813 pages Oct 3 06:55:36.057762 (XEN) heap[node=0][zone=20] -> 241625 pages Oct 3 06:55:36.057821 (XEN) heap[node=0][zone=21] -> 0 pages Oct 3 06:55:36.057866 (XEN) heap[node=0][zone=22] -> 0 pages Oct 3 06:55:36.069748 (XEN) heap[node=0][zone=23] -> 0 pages Oct 3 06:55:36.069807 (XEN) heap[node=0][zone=24] -> 0 pages Oct 3 06:55:36.069851 (XEN) heap[node=0][zone=25] -> 0 pages Oct 3 06:55:36.069895 (XEN) heap[node=0][zone=26] -> 0 pages Oct 3 06:55:36.081759 (XEN) heap[node=0][zone=27] -> 0 pages Oct 3 06:55:36.081816 (XEN) heap[node=0][zone=28] -> 0 pages Oct 3 06:55:36.081861 Oct 3 06:55:37.970664 Oct 3 06:55:39.735146 Oct 3 06:55:39.977213 Oct 3 06:55:41.740526 Oct 3 06:55:41.986323 (XEN) Dumping timer queues: Oct 3 06:55:42.005845 (XEN) CPU00: Oct 3 06:55:42.005845 (XEN) ex= 472166us timer=43fdc968 cb=arch/arm/vtimer.c#virt_timer_expired(43fdc960) Oct 3 06:55:42.005845 ( Oct 3 06:55:42.007955 XEN) CPU01: Oct 3 06:55:42.017618 (XEN) ex= 92541us timer=43fee968 cb=arch/arm/vtimer.c#virt_timer_expired(43fee960) Oct 3 06:55:42.017618 Oct 3 06:55:43.978839 Oct 3 06:55:45.745205 Oct 3 06:55:45.981778 (XEN) 'd' pressed -> dumping registers Oct 3 06:55:46.001878 (XEN) Oct 3 06:55:46.001934 (XEN) *** Dumping CPU0 host state: *** Oct 3 06:55:46.001980 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 06:55:46.002030 (XEN) CPU: 0 Oct 3 06:55:46.002070 (XEN) PC: Oct 3 06:55:46.005029 00269e8c arch/arm/domain.c#idle_loop+0x134/0x1b0 Oct 3 06:55:46.013719 (XEN) CPSR: 600f005a MODE:Hypervisor Oct 3 06:55:46.013776 (XEN) R0: 00000000 R1: 00000001 R2: 00000000 R3: 00000000 Oct 3 06:55:46.029789 (XEN) R4: 00000000 R5: 00310108 R6: 0034333c R7: 00000001 Oct 3 06:55:46.029851 (XEN) R8: 00340108 R9: 00000000 R10:40e00000 R11:4003ff54 R12:fffffffc Oct 3 06:55:46.029903 (XEN) HYP: SP: 4003ff44 LR: 0022c2d0 Oct 3 06:55:46.045780 (XEN) Oct 3 06:55:46.045833 (XEN) VTCR_EL2: 80003558 Oct 3 06:55:46.045878 (XEN) VTTBR_EL2: 00010000bef8a000 Oct 3 06:55:46.045922 (XEN) Oct 3 06:55:46.045961 (XEN) SCTLR_EL2: 30cd187f Oct 3 06:55:46.046003 (XEN) HCR_EL2: 007c663f Oct 3 06:55:46.046045 (XEN) TTBR0_EL2: 000000004111d000 Oct 3 06:55:46.057760 (XEN) Oct 3 06:55:46.057816 (XEN) ESR_EL2: 07e00000 Oct 3 06:55:46.057862 (XEN) HPFAR_EL2: 00104810 Oct 3 06:55:46.057904 (XEN) HDFAR: e0807f00 Oct 3 06:55:46.057946 (XEN) HIFAR: c042b7a4 Oct 3 06:55:46.057988 (XEN) Oct 3 06:55:46.058027 (XEN) Xen stack trace from sp=4003ff44: Oct 3 06:55:46.069756 (XEN) 07e00000 002ac008 002a102c 4003ff4c 00272664 00000000 00000000 00000000 Oct 3 06:55:46.069821 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 06:55:46.081754 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 06:55:46.093757 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 06:55:46.093822 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 06:55:46.105752 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 06:55:46.105814 (XEN) Xen call trace: Oct 3 06:55:46.105858 (XEN) [<00269e8c>] arch/arm/domain.c#idle_loop+0x134/0x1b0 (PC) Oct 3 06:55:46.117826 (XEN) [<0022c2d0>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 06:55:46.117889 (XEN) [<00272664>] arch_get_xen_caps+0/0x90 Oct 3 06:55:46.129765 (XEN) Oct 3 06:55:46.129817 (XEN) *** Dumping CPU1 host state: *** Oct 3 06:55:46.129863 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 06:55:46.129912 (XEN) CPU: 1 Oct 3 06:55:46.141738 (XEN) PC: 00269e8c arch/arm/domain.c#idle_loop+0x134/0x1b0 Oct 3 06:55:46.141808 (XEN) CPSR: 6000005a MODE:Hypervisor Oct 3 06:55:46.141854 (XEN) R0: 00000000 R1: 00000001 R2: 3fcf6000 R3: 00000000 Oct 3 06:55:46.153754 (XEN) R4: 00000001 R5: 00310108 R6: 0034333c R7: 00000002 Oct 3 06:55:46.153814 (XEN) R8: 00340108 R9: 00000001 R10:40e00000 R11:4000ff54 R12:fffffffc Oct 3 06:55:46.165758 (XEN) HYP: SP: 4000ff44 LR: 0022c2d0 Oct 3 06:55:46.165816 (XEN) Oct 3 06:55:46.165856 (XEN) VTCR_EL2: 80003558 Oct 3 06:55:46.165897 (XEN) VTTBR_EL2: 00010000bef8a000 Oct 3 06:55:46.177755 (XEN) Oct 3 06:55:46.177807 (XEN) SCTLR_EL2: 30cd187f Oct 3 06:55:46.177851 (XEN) HCR_EL2: 007c663f Oct 3 06:55:46.177893 (XEN) TTBR0_EL2: 00000000ba004000 Oct 3 06:55:46.177935 (XEN) Oct 3 06:55:46.177973 (XEN) ESR_EL2: 07e00000 Oct 3 06:55:46.189757 (XEN) HPFAR_EL2: 00104810 Oct 3 06:55:46.189813 (XEN) HDFAR: e0807f00 Oct 3 06:55:46.189856 (XEN) HIFAR: c09f6d20 Oct 3 06:55:46.189897 (XEN) Oct 3 06:55:46.189935 (XEN) Xen stack trace from sp=4000ff44: Oct 3 06:55:46.201749 (XEN) 07e00000 00311390 00000001 4000ff3c 00272f48 00000000 00000000 00000000 Oct 3 06:55:46.201819 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 06:55:46.213751 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 06:55:46.213813 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 06:55:46.225758 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 06:55:46.225821 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 06:55:46.237773 (XEN) Xen call trace: Oct 3 06:55:46.237828 (XEN) [<00269e8c>] arch/arm/domain.c#idle_loop+0x134/0x1b0 (PC) Oct 3 06:55:46.249748 (XEN) [<0022c2d0>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 06:55:46.249809 (XEN) [<00272f48>] start_secondary+0x208/0x20c Oct 3 06:55:46.249857 (XEN) Oct 3 06:55:46.249896 Oct 3 06:55:47.986848 (XEN) 'e' pressed -> dumping event-channel info Oct 3 06:55:48.009802 (XEN) Event channel information for domain 0: Oct 3 06:55:48.009861 (XEN) Polling vCPUs: {} Oct 3 06:55:48.009904 (XEN) port Oct 3 06:55:48.012171 [p/m/s] Oct 3 06:55:48.021718 (XEN) 1 [0/0/ - ]: s=3 n=1 x=0 d=0 p=4 Oct 3 06:55:48.021775 (XEN) 2 [0/0/ - ]: s=5 n=0 x=0 v=2 Oct 3 06:55:48.021822 (XEN) 3 [0/0/ - ]: s=5 n=1 x=0 v=3 Oct 3 06:55:48.033756 (XEN) 4 [0/0/ - ]: s=3 n=0 x=0 d=0 p=1 Oct 3 06:55:48.033817 Oct 3 06:55:49.986671 (XEN) gnttab_usage_print_all [ key 'g' pressed Oct 3 06:55:50.005856 (XEN) -------- active -------- -------- shared -------- Oct 3 06:55:50.005918 (XEN) [ref] localdo Oct 3 06:55:50.008263 m mfn pin localdom gmfn flags Oct 3 06:55:50.017737 (XEN) grant-table for remote d0 (v1) Oct 3 06:55:50.017792 (XEN) 1 frames (64 max), 0 maptrack frames (1024 max) Oct 3 06:55:50.029788 (XEN) no active grant table entries Oct 3 06:55:50.029846 (XEN) gnttab_usage_print_all ] done Oct 3 06:55:50.029892 Oct 3 06:55:51.985866 Oct 3 06:55:53.755238 Oct 3 06:55:53.993195 (XEN) Physical memory information: Oct 3 06:55:54.021773 (XEN) Xen heap: 65132kB free Oct 3 06:55:54.021857 (XEN) heap[19]: 523252kB free Oct 3 06:55:54.021905 (XEN) heap[20]: 966500kB f Oct 3 06:55:54.024116 ree Oct 3 06:55:54.033660 (XEN) Dom heap: 1489752kB free Oct 3 06:55:54.033712 Oct 3 06:55:55.995257 Oct 3 06:55:57.761839 Oct 3 06:55:58.001958 (XEN) sched_smt_power_savings: disabled Oct 3 06:55:58.021827 (XEN) NOW=66041264250 Oct 3 06:55:58.021886 (XEN) Online Cpus: 0-1 Oct 3 06:55:58.021929 (XEN) Cpupool 0: Oct 3 06:55:58.021970 (XEN) Cpus: 0-1 Oct 3 06:55:58.022010 (XEN) Schedul Oct 3 06:55:58.024188 ing granularity: cpu, 1 CPU per sched-resource Oct 3 06:55:58.033656 (XEN) Scheduler: SMP Credit Scheduler rev2 (credit2) Oct 3 06:55:58.033711 (XEN) Active queues: 1 Oct 3 06:55:58.033753 (XEN) default-weight = 256 Oct 3 06:55:58.049779 (XEN) Runqueue 0: Oct 3 06:55:58.049834 (XEN) ncpus = 2 Oct 3 06:55:58.049879 (XEN) cpus = 0-1 Oct 3 06:55:58.049921 (XEN) max_weight = 256 Oct 3 06:55:58.049964 (XEN) pick_bias = 0 Oct 3 06:55:58.050006 (XEN) instload = 0 Oct 3 06:55:58.065768 (XEN) aveload = 1626 (~0%) Oct 3 06:55:58.065830 (XEN) idlers: 2 Oct 3 06:55:58.065895 (XEN) tickled: 0 Oct 3 06:55:58.065959 (XEN) fully idle cores: 2 Oct 3 06:55:58.066008 (XEN) Domain info: Oct 3 06:55:58.066049 (XEN) Domain: 0 w 256 c 0 v 2 Oct 3 06:55:58.066092 (XEN) 1: [0.0] flags=0 cpu=1 credit=8598108 [w=256] load=1568 (~0%) Oct 3 06:55:58.081781 (XEN) 2: [0.1] flags=0 cpu=0 credit=10500000 [w=256] load=75 (~0%) Oct 3 06:55:58.081845 (XEN) Runqueue 0: Oct 3 06:55:58.081887 (XEN) CPU[00] runq=0, sibling={0}, core={0-1} Oct 3 06:55:58.093762 (XEN) CPU[01] runq=0, sibling={1}, core={0-1} Oct 3 06:55:58.093822 (XEN) RUNQ: Oct 3 06:55:58.093863 (XEN) CPUs info: Oct 3 06:55:58.093903 (XEN) CPU[00] current=d[IDLE]v0, curr=d[IDLE]v0, prev=NULL Oct 3 06:55:58.105710 (XEN) CPU[01] current=d[IDLE]v1, curr=d[IDLE]v1, prev=NULL Oct 3 06:55:58.105772 Oct 3 06:56:00.002669 Oct 3 06:56:01.770648 Oct 3 06:56:02.010473 (XEN) Synced stime skew: max=83ns avg=83ns samples=1 current=83ns Oct 3 06:56:02.033771 (XEN) Synced cycles skew: max=1 avg=1 samples=1 current=1 Oct 3 06:56:02.033832 Oct 3 06:56:02.035992 Oct 3 06:56:04.014572 Oct 3 06:56:05.778233 Oct 3 06:56:06.022877 Oct 3 06:56:07.784174 Oct 3 06:56:08.029192 Oct 3 06:56:09.790236 Oct 3 06:56:19.991758 (XEN) 'q' pressed -> dumping domain info (now = 88033443541) Oct 3 06:56:20.013737 (XEN) General information for domain 0: Oct 3 06:56:20.013772 (XEN) refcnt=3 dying=0 pause_ Oct 3 06:56:20.015038 count=0 Oct 3 06:56:20.025691 (XEN) nr_pages=131072 xenheap_pages=2 dirty_cpus={} max_pages=131072 Oct 3 06:56:20.025725 (XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=00000020 Oct 3 06:56:20.037709 (XEN) p2m mappings for domain 0 (vmid 1): Oct 3 06:56:20.037742 (XEN) 1G mappings: 0 (shattered 0) Oct 3 06:56:20.037767 (XEN) 2M mappings: 255 (shattered 1) Oct 3 06:56:20.049730 (XEN) 4K mappings: 944 Oct 3 06:56:20.049787 (XEN) Rangesets belonging to domain 0: Oct 3 06:56:20.049834 (XEN) Interrupts { 32-72, 74, 77-79, 82-84, 86, 88-100, 103-104, 107-110, 114, 116-120, 123, 126-128, 138, 144, 146-147, 149-151, 156 } Oct 3 06:56:20.061713 (XEN) I/O Memory { 2020-2050, 3810-3811, 3830-3831, 3860-3861, 10000-10001, 10010-10045, 10050-10055, 10060-10061, 101b0-101b1, 101d0-101d1, 101e0-101e1, 10440-10441, 10800-10801, 10830-10831, 10850-10851, 10a60-10a61, 10d10-10d11, 11000-11010, 11200-11201, 11210-11211, 11400-11401, 11800-11805, 11c00-11c01, 11c10-11c11, 11d40-11d41, 11f20-11f21, 12000-12010, 12100-12101, 12110-12111, 12120-12121, 12130-12131, 12170-12171, 121a0-121a1, 121b0-121b1, 121d0-121d1, 12200-12201, 12210-12211, 12220-12221, 12230-12231, 12250-12251, 122f0-122f1, 12c00-12c01, 12c10-12c11, 12c30-12c31, 12c60-12c61, 12c70-12c71, 12c80-12c81, 12c90-12c91, 12ca0-12ca1, 12cb0-12cb1, 12cc0-12cc1, 12cd0-12cd1, 12ce0-12ce1, 12d10-12d11, 12d20-12d21, 12d30-12d31, 12d40-12d41, 12d60-12d61, 12d70-12d71, 12dd0-12dd1, 13260-13261, 13270-13271, 13280-13281, 13290-13291, 132a0-132a1, 132b0-132b1, 132c0-132c1, 132d0-132d1, 132e0-132e1, 132f0-132f1, 13400-13401, 13c40-13c41, 13c50-13c51, 13e00-13e01, 13e10-13e11, 13e20-13e21, 13e30-13e31, 13e80-13e81, 13e90-13e91, 13ea0-13ea1, 13eb0-13eb1, 14400-14440, 14450-14460, 14500-14510, 14530-145a0, 145b0-145b1, 14640-14641, 14650-14651 } Oct 3 06:56:20.157722 (XEN) NODE affinity for domain 0: [0] Oct 3 06:56:20.169706 (XEN) VCPU information and callbacks for domain 0: Oct 3 06:56:20.169757 (XEN) UNIT0 affinities: hard={0-1} soft={0-1} Oct 3 06:56:20.169804 (XEN) VCPU0: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 06:56:20.181709 (XEN) pause_count=0 pause_flags=1 Oct 3 06:56:20.181763 (XEN) GICH_LRs (vcpu 0) mask=0 Oct 3 06:56:20.181807 (XEN) VCPU_LR[0]=0 Oct 3 06:56:20.193713 (XEN) VCPU_LR[1]=0 Oct 3 06:56:20.193744 (XEN) VCPU_LR[2]=0 Oct 3 06:56:20.193767 (XEN) VCPU_LR[3]=0 Oct 3 06:56:20.193789 (XEN) No periodic timer Oct 3 06:56:20.193811 (XEN) UNIT1 affinities: hard={0-1} soft={0-1} Oct 3 06:56:20.205712 (XEN) VCPU1: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 06:56:20.205747 (XEN) pause_count=0 pause_flags=1 Oct 3 06:56:20.205772 (XEN) GICH_LRs (vcpu 1) mask=0 Oct 3 06:56:20.217710 (XEN) VCPU_LR[0]=0 Oct 3 06:56:20.217740 (XEN) VCPU_LR[1]=0 Oct 3 06:56:20.217763 (XEN) VCPU_LR[2]=0 Oct 3 06:56:20.217785 (XEN) VCPU_LR[3]=0 Oct 3 06:56:20.217807 (XEN) No periodic timer Oct 3 06:56:20.217829 (XEN) Notifying guest 0:0 (virq 1, port 0) Oct 3 06:56:20.229684 (XEN) Notifying guest 0:1 (virq 1, port 0) Oct 3 06:56:20.229716 Oct 3 06:56:31.996244 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 06:56:32.021696 Oct 3 06:56:32.021726 arndale-westfield login: Oct 3 06:56:32.022728 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 06:57:10.121178 [ 180.188334] sd 0:0:0:0: [sda] Synchronizing SCSI cache Oct 3 06:57:57.452873 [ 180.202963] wake enabled for irq 119 (gpx1-4) Oct 3 06:57:57.464811 [ 180.205959] wake enabled for irq 120 (gpx1-5) Oct 3 06:57:57.477056 [ 180.210430] wake enabled for irq 121 (gpx1-6) Oct 3 06:57:57.477074 [ 180.214811] wake enabled for irq 122 (gpx1-7) Oct 3 06:57:57.492951 [ 180.219261] wake enabled for irq 123 (gpx2-0) Oct 3 06:57:57.492951 [ 180.223663] wake enabled for irq 124 (gpx2-1) Oct 3 06:57:57.492951 [ 180.228529] reboot: Resô Oct 3 06:57:57.828878 Oct 3 06:57:57.828878 Oct 3 06:57:57.828878 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 06:57:57.840910 Oct 3 06:57:57.840910 CPU: Exynos5250@1000MHz Oct 3 06:57:57.840910 Oct 3 06:57:57.840910 Board: Arndale Oct 3 06:57:57.840910 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 06:57:57.840910 ready Oct 3 06:57:57.840910 DRAM: 2 GiB Oct 3 06:57:57.840910 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 06:57:57.864872 trace: enabled Oct 3 06:57:57.900848 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 06:57:58.260834 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 06:57:58.320847 In: serial Oct 3 06:57:58.320847 Out: serial Oct 3 06:57:58.320847 Err: serial Oct 3 06:57:58.320847 SCSI: ARNDALE SCSI INIT Oct 3 06:57:58.320847 Target spinup took 0 ms. Oct 3 06:57:58.333075 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 06:57:58.333157 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 06:57:58.344911 Net: Net Initialization Skipped Oct 3 06:57:58.344911 No ethernet found. Oct 3 06:57:58.344911 Hostname: arndale-westfield Oct 3 06:57:58.345176 Hit any key to stop autoboot: 2  1  0 Oct 3 06:58:00.272836 (Re)start USB... Oct 3 06:58:00.272836 USB0: USB EHCI 1.00 Oct 3 06:58:00.272836 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 06:58:05.876911 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 06:58:05.876911 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 06:58:06.320871 Waiting for Ethernet connection... done. Oct 3 06:58:07.972862 BOOTP broadcast 1 Oct 3 06:58:07.972862 BOOTP broadcast 2 Oct 3 06:58:09.712826 DHCP client bound to address 10.149.64.45 (1848 ms) Oct 3 06:58:09.748881 Using asx0 device Oct 3 06:58:09.748881 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 06:58:09.760864 Filename 'pxelinux.0'. Oct 3 06:58:09.760864 Load address: 0x43e00000 Oct 3 06:58:09.760864 Loading: *### Oct 3 06:58:09.773006 2.4 MiB/s Oct 3 06:58:09.773081 done Oct 3 06:58:09.784880 Bytes transferred = 42430 (a5be hex) Oct 3 06:58:09.784880 missing environment variable: pxeuuid Oct 3 06:58:09.784880 Retrieving file: pxelinux.cfg/0A95402D Oct 3 06:58:09.784880 Using asx0 device Oct 3 06:58:09.796874 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 06:58:09.796874 Filename 'pxelinux.cfg/0A95402D'. Oct 3 06:58:09.796874 Load address: 0x51000000 Oct 3 06:58:09.796874 Loading: *# Oct 3 06:58:09.808855 355.5 KiB/s Oct 3 06:58:09.808855 done Oct 3 06:58:09.808855 Bytes transferred = 728 (2d8 hex) Oct 3 06:58:09.808855 Config file found Oct 3 06:58:09.808855 Ignoring unknown command: serial Oct 3 06:58:09.808855 1: ^Overwrite Oct 3 06:58:09.808855 Retrieving file: /osstest/tmp//arndale-westfield--initrd.gz Oct 3 06:58:09.820892 Using asx0 device Oct 3 06:58:09.820892 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 06:58:09.832893 Filename '/osstest/tmp//arndale-westfield--initrd.gz'. Oct 3 06:58:09.832893 Load address: 0x43300000 Oct 3 06:58:09.832893 Loading: *################################################################# Oct 3 06:58:10.156832 ################################################################# Oct 3 06:58:10.480850 ################################################################# Oct 3 06:58:10.816842 ################################################################# Oct 3 06:58:11.144975 ################################################################# Oct 3 06:58:11.456838 ################################################################# Oct 3 06:58:11.792842 ################################################################# Oct 3 06:58:12.112823 ################################################################# Oct 3 06:58:12.436843 ################################################################# Oct 3 06:58:12.760841 ################################################################# Oct 3 06:58:13.089015 ################################################################# Oct 3 06:58:13.412824 ################################################################# Oct 3 06:58:13.748842 ################################################################# Oct 3 06:58:14.064970 ################################################################# Oct 3 06:58:14.388844 ################################################################# Oct 3 06:58:14.724760 ################################################################# Oct 3 06:58:15.048820 ################################################################# Oct 3 06:58:15.372967 ################################################################# Oct 3 06:58:15.697008 ################################################################# Oct 3 06:58:16.024812 ################################################################# Oct 3 06:58:16.348830 ################################################################# Oct 3 06:58:16.672842 ################################################################# Oct 3 06:58:16.996957 ################################################################# Oct 3 06:58:17.320828 ################################################################# Oct 3 06:58:17.644841 ################################################################# Oct 3 06:58:17.968827 ################################################################# Oct 3 06:58:18.292839 ################################################################# Oct 3 06:58:18.617020 ######################################## Oct 3 06:58:18.812993 2.7 MiB/s Oct 3 06:58:18.825056 done Oct 3 06:58:18.825110 Bytes transferred = 26339173 (191e765 hex) Oct 3 06:58:18.825158 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/linux Oct 3 06:58:18.837095 Using asx0 device Oct 3 06:58:18.837150 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 06:58:18.837199 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/linux'. Oct 3 06:58:18.849068 Load address: 0x42000000 Oct 3 06:58:18.849124 Loading: *################################################################# Oct 3 06:58:19.181770 ################################################################# Oct 3 06:58:19.508830 ################################################################# Oct 3 06:58:19.832906 ################################################################# Oct 3 06:58:20.160780 ################################################################# Oct 3 06:58:20.484848 ############################################# Oct 3 06:58:20.704878 2.7 MiB/s Oct 3 06:58:20.704878 done Oct 3 06:58:20.704878 Bytes transferred = 5427712 (52d200 hex) Oct 3 06:58:20.717051 append: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=44181 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 06:58:20.752918 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb Oct 3 06:58:20.764913 Using asx0 device Oct 3 06:58:20.764913 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 06:58:20.764913 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb'. Oct 3 06:58:20.776905 Load address: 0x43000000 Oct 3 06:58:20.776905 Loading: *#### Oct 3 06:58:20.801003 2.2 MiB/s Oct 3 06:58:20.801064 done Oct 3 06:58:20.801104 Bytes transferred = 46686 (b65e hex) Oct 3 06:58:20.801148 Kernel image @ 0x42000000 [ 0x000000 - 0x52d200 ] Oct 3 06:58:20.812922 ## Flattened Device Tree blob at 43000000 Oct 3 06:58:20.812922 Booting using the fdt blob at 0x43000000 Oct 3 06:58:20.812922 Loading Ramdisk to 4e6e1000, end 4ffff765 ... OK Oct 3 06:58:21.244965 Loading Device Tree to 4e6d2000, end 4e6e065d ... OK Oct 3 06:58:21.244972 Oct 3 06:58:21.244972 Starting kernel ...(fake run for tracing) Oct 3 06:58:21.256855 Oct 3 06:58:21.256855 Oct 3 06:58:21.256855 Starting kernel ... Oct 3 06:58:21.256855 Oct 3 06:58:21.256855 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 06:58:27.309671 [ 0.000000] Linux version 6.1.0-25-armmp (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.106-3 (2024-08-26) Oct 3 06:58:27.321807 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 06:58:27.333755 [ 0.000000] CPU: div instructions available: patching division code Oct 3 06:58:27.333818 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 06:58:27.345770 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 06:58:27.357749 [ 0.000000] Memory policy: Data cache writealloc Oct 3 06:58:27.357810 [ 0.000000] efi: UEFI not found. Oct 3 06:58:27.357855 [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 Oct 3 06:58:27.369752 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 06:58:27.369811 [ 0.000000] Zone ranges: Oct 3 06:58:27.369855 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 06:58:27.381764 [ 0.000000] Normal empty Oct 3 06:58:27.381821 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 06:58:27.381870 [ 0.000000] Movable zone start for each node Oct 3 06:58:27.393764 [ 0.000000] Early memory node ranges Oct 3 06:58:27.393822 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 06:58:27.405754 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 06:58:27.405818 [ 0.000000] percpu: Embedded 18 pages/cpu s44692 r8192 d20844 u73728 Oct 3 06:58:27.417726 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 06:58:27.417791 [ 0.000000] Kernel command line: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=44181 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 06:58:27.465767 [ 0.000000] Unknown kernel command line parameters "preseed --- vga=normal auto=true hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=44181 domain=test-lab.xenproject.org", will be passed to user space. Oct 3 06:58:27.501770 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 06:58:27.513739 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 06:58:27.513806 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 06:58:27.525759 [ 0.000000] Memory: 2015968K/2097152K available (11264K kernel code, 1696K rwdata, 3724K rodata, 2048K init, 376K bss, 64800K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 06:58:27.537770 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 06:58:27.549759 [ 0.000000] ftrace: allocating 39612 entries in 117 pages Oct 3 06:58:27.549821 [ 0.000000] ftrace: allocated 117 pages with 5 groups Oct 3 06:58:27.561755 [ 0.000000] trace event string verifier disabled Oct 3 06:58:27.561815 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 06:58:27.561862 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 06:58:27.573763 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 06:58:27.573823 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 06:58:27.585740 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 06:58:27.585809 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 06:58:27.597770 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 06:58:27.597851 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 06:58:27.609753 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 06:58:27.609817 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 06:58:27.621758 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 06:58:27.621821 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 06:58:27.633777 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 06:58:27.645768 [ 0.000017] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 06:58:27.645837 [ 0.002612] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 06:58:27.657761 [ 0.002625] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 06:58:27.669758 [ 0.002640] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 06:58:27.669827 [ 0.002651] Ignoring duplicate/late registration of read_current_timer delay Oct 3 06:58:27.681768 [ 0.003014] Console: colour dummy device 80x30 Oct 3 06:58:27.681828 [ 0.003054] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 06:58:27.693768 [ 0.003068] CPU: Testing write buffer coherency: ok Oct 3 06:58:27.705757 [ 0.003110] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 06:58:27.705830 [ 0.003118] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 06:58:27.717762 [ 0.003125] pid_max: default: 32768 minimum: 301 Oct 3 06:58:27.717822 [ 0.003484] LSM: Security Framework initializing Oct 3 06:58:27.729765 [ 0.003555] landlock: Up and running. Oct 3 06:58:27.729823 [ 0.003560] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 06:58:27.741750 [ 0.003744] AppArmor: AppArmor initialized Oct 3 06:58:27.741810 [ 0.003757] TOMOYO Linux initialized Oct 3 06:58:27.741855 [ 0.003802] LSM support for eBPF active Oct 3 06:58:27.753752 [ 0.004046] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 06:58:27.753821 [ 0.004060] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 06:58:27.765846 [ 0.005492] /cpus/cpu@0 missing clock-frequency property Oct 3 06:58:27.765907 [ 0.005522] /cpus/cpu@1 missing clock-frequency property Oct 3 06:58:27.777752 [ 0.005535] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 06:58:27.777814 [ 0.006489] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 06:58:27.789758 [ 0.006496] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 06:58:27.789821 [ 0.006601] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 06:58:27.801762 [ 0.006606] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 06:58:27.801824 [ 0.006751] Setting up static identity map for 0x40300000 - 0x403000ac Oct 3 06:58:27.813767 [ 0.007914] rcu: Hierarchical SRCU implementation. Oct 3 06:58:27.813828 [ 0.007920] rcu: Max phase no-delay instances is 1000. Oct 3 06:58:27.825755 [ 0.010042] EFI services will not be available. Oct 3 06:58:27.825814 [ 0.010387] smp: Bringing up secondary CPUs ... Oct 3 06:58:27.825862 [ 0.011141] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 06:58:27.837757 [ 0.011154] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 06:58:27.849771 [ 0.011298] smp: Brought up 1 node, 2 CPUs Oct 3 06:58:27.849829 [ 0.011307] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 06:58:27.861755 [ 0.011314] CPU: All CPU(s) started in HYP mode. Oct 3 06:58:27.861816 [ 0.011318] CPU: Virtualization extensions available. Oct 3 06:58:27.861886 [ 0.011936] devtmpfs: initialized Oct 3 06:58:27.873755 [ 0.023326] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 06:58:27.873824 [ 0.023559] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 06:58:27.885774 [ 0.023583] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 06:58:27.897765 [ 0.024118] pinctrl core: initialized pinctrl subsystem Oct 3 06:58:27.897826 [ 0.024821] DMI not present or invalid. Oct 3 06:58:27.897894 [ 0.025498] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 06:58:27.909765 [ 0.030899] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 06:58:27.909829 [ 0.032444] audit: initializing netlink subsys (disabled) Oct 3 06:58:27.921767 [ 0.032652] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 Oct 3 06:58:27.933761 [ 0.033811] thermal_sys: Registered thermal governor 'fair_share' Oct 3 06:58:27.933823 [ 0.033819] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 06:58:27.945751 [ 0.033824] thermal_sys: Registered thermal governor 'step_wise' Oct 3 06:58:27.945815 [ 0.033828] thermal_sys: Registered thermal governor 'user_space' Oct 3 06:58:27.957752 [ 0.033833] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 06:58:27.957816 [ 0.034208] No ATAGs? Oct 3 06:58:27.957860 [ 0.034277] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 06:58:27.969761 [ 0.034285] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 06:58:27.969823 [ 0.035365] Serial: AMBA PL011 UART driver Oct 3 06:58:27.981768 [ 0.084779] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 06:58:27.981837 [ 0.091781] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 06:58:27.993771 [ 0.102773] iommu: Default domain type: Translated Oct 3 06:58:28.005755 [ 0.102782] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 06:58:28.005819 [ 0.103749] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 06:58:28.017741 [ 0.104286] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 06:58:28.017802 [ 0.104298] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 06:58:28.017852 [ 0.104833] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 06:58:28.029770 [ 0.104863] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 06:58:28.041765 [ 0.105046] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 06:58:28.041825 [ 0.105397] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 06:58:28.053757 [ 0.105408] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 06:58:28.053819 [ 0.105797] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 06:58:28.065764 [ 0.106082] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 06:58:28.065825 [ 0.106092] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 06:58:28.077753 [ 0.106369] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 06:58:28.077815 [ 0.106471] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 06:58:28.077863 [ 0.106480] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 06:58:28.089746 [ 0.106680] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 06:58:28.089806 [ 0.106874] pps_core: LinuxPPS API ver. 1 registered Oct 3 06:58:28.101770 [ 0.106879] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 06:58:28.113752 [ 0.106896] PTP clock support registered Oct 3 06:58:28.113811 [ 0.108529] NetLabel: Initializing Oct 3 06:58:28.113857 [ 0.108536] NetLabel: domain hash size = 128 Oct 3 06:58:28.125746 [ 0.108541] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 06:58:28.125808 [ 0.108596] NetLabel: unlabeled traffic allowed by default Oct 3 06:58:28.125880 [ 0.108777] vgaarb: loaded Oct 3 06:58:28.137784 [ 0.109413] clocksource: Switched to clocksource mct-frc Oct 3 06:58:28.137845 [ 0.110029] VFS: Disk quotas dquot_6.6.0 Oct 3 06:58:28.137892 [ 0.110115] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 06:58:28.149760 [ 0.110852] AppArmor: AppArmor Filesystem Enabled Oct 3 06:58:28.149820 [ 0.120887] NET: Registered PF_INET protocol family Oct 3 06:58:28.161768 [ 0.121109] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 06:58:28.161836 [ 0.122719] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 06:58:28.173784 [ 0.122820] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 06:58:28.185770 [ 0.122845] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 06:58:28.185838 [ 0.122944] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 06:58:28.197767 [ 0.123176] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 06:58:28.209760 [ 0.123405] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 06:58:28.209830 [ 0.123496] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 06:58:28.221749 [ 0.123537] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 06:58:28.221815 [ 0.123743] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 06:58:28.233766 [ 0.123784] NET: Registered PF_XDP protocol family Oct 3 06:58:28.233827 [ 0.123795] PCI: CLS 0 bytes, default 64 Oct 3 06:58:28.245749 [ 0.124903] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 06:58:28.245819 [ 0.125158] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 06:58:28.257763 [ 0.129779] Trying to unpack rootfs image as initramfs... Oct 3 06:58:28.257823 [ 0.183574] Initialise system trusted keyrings Oct 3 06:58:28.269750 [ 0.183639] Key type blacklist registered Oct 3 06:58:28.269809 [ 0.183938] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 06:58:28.281773 [ 0.195154] zbud: loaded Oct 3 06:58:28.281830 [ 0.196291] integrity: Platform Keyring initialized Oct 3 06:58:28.281878 [ 0.196319] integrity: Machine keyring initialized Oct 3 06:58:28.293749 [ 0.196327] Key type asymmetric registered Oct 3 06:58:28.293809 [ 0.196333] Asymmetric key parser 'x509' registered Oct 3 06:58:28.293857 [ 1.501396] Freeing initrd memory: 25724K Oct 3 06:58:28.305782 [ 1.512957] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 06:58:28.305845 [ 1.513261] bounce: pool size: 64 pages Oct 3 06:58:28.305892 [ 1.513498] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 06:58:28.317776 [ 1.513657] io scheduler mq-deadline registered Oct 3 06:58:28.317835 [ 1.518766] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 06:58:28.329770 [ 1.539341] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 06:58:28.341759 [ 1.539354] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 06:58:28.341831 [ 1.541650] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 06:58:28.353772 [ 1.541660] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 06:58:28.365767 [ 1.542516] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 06:58:28.377746 [ 1.542525] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 06:58:28.377821 [ 1.543328] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 06:58:28.389752 [ 1.543336] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 06:58:28.401752 [ 1.545696] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 06:58:28.401844 [ 1.548497] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 06:58:28.413796 [ 1.551196] Serial: AMBA driver Oct 3 06:58:28.413853 [ 1.551440] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 06:58:28.425766 [ 1.551914] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 06:58:28.437772 [ 1.552435] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 06:58:28.437843 [ 2.690539] printk: console [ttySAC2] enabled Oct 3 06:58:28.449750 [ 2.695354] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 06:58:28.461706 [ 2.705999] STM32 USART driver initialized Oct 3 06:58:28.461766 [ 2.720094] mousedev: PS/2 mouse device common for all mice Oct 3 06:58:28.473716 [ 2.751386] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 06:58:28.509732 [ 2.760018] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T06:58:30 UTC (1727938710) Oct 3 06:58:28.521746 [ 2.769852] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 06:58:28.521809 [ 2.777267] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 06:58:28.533746 [ 2.785252] NET: Registered PF_INET6 protocol family Oct 3 06:58:28.545685 [ 2.798968] Segment Routing with IPv6 Oct 3 06:58:28.557765 [ 2.801205] In-situ OAM (IOAM) with IPv6 Oct 3 06:58:28.557825 [ 2.805163] mip6: Mobile IPv6 Oct 3 06:58:28.557869 [ 2.808042] NET: Registered PF_PACKET protocol family Oct 3 06:58:28.569765 [ 2.813171] mpls_gso: MPLS GSO support Oct 3 06:58:28.569824 [ 2.817403] ThumbEE CPU extension supported. Oct 3 06:58:28.569871 [ 2.821040] Registering SWP/SWPB emulation handler Oct 3 06:58:28.581754 [ 2.826341] registered taskstats version 1 Oct 3 06:58:28.581814 [ 2.829931] Loading compiled-in X.509 certificates Oct 3 06:58:28.581862 [ 3.290513] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 06:58:29.049780 [ 3.297833] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 06:58:29.061803 [ 3.308858] zswap: loaded using pool lzo/zbud Oct 3 06:58:29.061892 [ 3.312887] Key type .fscrypt registered Oct 3 06:58:29.073756 [ 3.316163] Key type fscrypt-provisioning registered Oct 3 06:58:29.074297 [ 3.329951] Key type encrypted registered Oct 3 06:58:29.085812 [ 3.332499] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 06:58:29.085889 [ 3.338036] ima: No TPM chip found, activating TPM-bypass! Oct 3 06:58:29.097768 [ 3.343539] ima: Allocated hash algorithm: sha256 Oct 3 06:58:29.097830 [ 3.348163] ima: No architecture policies found Oct 3 06:58:29.109754 [ 3.352727] evm: Initialising EVM extended attributes: Oct 3 06:58:29.109817 [ 3.357777] evm: security.selinux Oct 3 06:58:29.109862 [ 3.361047] evm: security.SMACK64 (disabled) Oct 3 06:58:29.121795 [ 3.365322] evm: security.SMACK64EXEC (disabled) Oct 3 06:58:29.121857 [ 3.369922] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 06:58:29.121906 [ 3.374952] evm: security.SMACK64MMAP (disabled) Oct 3 06:58:29.133759 [ 3.379552] evm: security.apparmor Oct 3 06:58:29.133818 [ 3.382937] evm: security.ima Oct 3 06:58:29.133863 [ 3.385888] evm: security.capability Oct 3 06:58:29.145721 [ 3.389453] evm: HMAC attrs: 0x1 Oct 3 06:58:29.145791 [ 3.977521] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 06:58:29.733766 [ 3.983467] clk: Disabling unused clocks Oct 3 06:58:29.733826 [ 3.997226] Freeing unused kernel image (initmem) memory: 2048K Oct 3 06:58:29.757754 [ 4.002103] Checked W+X mappings: passed, no W+X pages found Oct 3 06:58:29.757817 [ 4.007362] Run /init as init process Oct 3 06:58:29.757864 [ 4.554754] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 06:58:30.309759 [ 4.640945] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 06:58:30.405671 [ 4.660886] usbcore: registered new interface driver usbfs Oct 3 06:58:30.417768 [ 4.661026] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 06:58:30.429788 [ 4.665007] usbcore: registered new interface driver hub Oct 3 06:58:30.429849 [ 4.753995] usbcore: registered new device driver usb Oct 3 06:58:30.513755 [ 4.756572] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 06:58:30.513817 [ 4.762790] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 06:58:30.525714 [ 4.835244] phy phy-12130000.phy.1: phy_power_on was called before phy_init Oct 3 06:58:30.597758 [ 4.841962] exynos-ohci 12120000.usb: USB Host Controller Oct 3 06:58:30.597821 [ 4.846760] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Oct 3 06:58:30.609758 [ 4.854188] usb3503 usb-hub: switched to HUB mode Oct 3 06:58:30.609817 [ 4.858483] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 06:58:30.621712 [ 4.865098] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Oct 3 06:58:30.621775 [ 4.894201] phy phy-12130000.phy.1: phy_power_on was called before phy_init Oct 3 06:58:30.657758 [ 4.901144] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 06:58:30.657821 [ 4.906035] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Oct 3 06:58:30.669728 [ 4.914820] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Oct 3 06:58:30.669790 [ 4.938068] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 06:58:30.693765 [ 4.940260] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 06:58:30.705766 [ 4.950908] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 06:58:30.705833 [ 4.958081] usb usb1: Product: USB Host Controller Oct 3 06:58:30.717757 [ 4.962852] usb usb1: Manufacturer: Linux 6.1.0-25-armmp ohci_hcd Oct 3 06:58:30.717821 [ 4.968929] usb usb1: SerialNumber: 12120000.usb Oct 3 06:58:30.729712 [ 4.982116] hub 1-0:1.0: USB hub found Oct 3 06:58:30.741731 [ 4.984443] hub 1-0:1.0: 3 ports detected Oct 3 06:58:30.741790 [ 4.993819] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 06:58:30.753770 [ 5.000655] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 06:58:30.765798 [ 5.007871] usb usb2: Product: EHCI Host Controller Oct 3 06:58:30.765831 [ 5.012708] usb usb2: Manufacturer: Linux 6.1.0-25-armmp ehci_hcd Oct 3 06:58:30.765859 [ 5.018785] usb usb2: SerialNumber: 12110000.usb Oct 3 06:58:30.777720 [ 5.030961] hub 2-0:1.0: USB hub found Oct 3 06:58:30.789715 [ 5.039953] hub 2-0:1.0: 3 ports detected Oct 3 06:58:30.789774 [ 5.108369] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 06:58:30.861749 [ 5.112449] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 06:58:30.873740 [ 5.124265] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 06:58:30.885774 [ 5.132306] xhci-hcd xhci-hcd.2.auto: irq 108, io mem 0x12000000 Oct 3 06:58:30.885835 [ 5.138437] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 06:58:30.897752 [ 5.143698] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 06:58:30.897820 [ 5.151322] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 06:58:30.909790 [ 5.157982] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 06:58:30.921751 [ 5.166075] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 06:58:30.921818 [ 5.173275] usb usb3: Product: xHCI Host Controller Oct 3 06:58:30.933757 [ 5.178129] usb usb3: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 06:58:30.933841 [ 5.184202] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 06:58:30.945765 [ 5.190337] hub 3-0:1.0: USB hub found Oct 3 06:58:30.945824 [ 5.192880] hub 3-0:1.0: 1 port detected Oct 3 06:58:30.945869 [ 5.197972] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 06:58:30.957762 [ 5.204899] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 06:58:30.969751 [ 5.213030] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 06:58:30.969819 [ 5.220229] usb usb4: Product: xHCI Host Controller Oct 3 06:58:30.981751 [ 5.225080] usb usb4: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 06:58:30.981814 [ 5.231156] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 06:58:30.993729 [ 5.236652] hub 4-0:1.0: USB hub found Oct 3 06:58:30.993788 [ 5.239800] hub 4-0:1.0: 1 port detected Oct 3 06:58:30.993835 [ 5.305495] usb 2-3: new high-speed USB device number 2 using exynos-ehci Oct 3 06:58:31.065695 Starting system log daemon: syslogd, klogd. Oct 3 06:58:31.149698 /var/run/utmp: No such file or directory Oct 3 06:58:32.997792 [?1h=(B   Oct 3 06:58:33.045742  Oct 3 06:58:33.045805 [  (-*) ][ Oct 03  6:58 ] Oct 3 06:58:33.057796 [  (0*start) ][ Oct 03  6:58 ] Oct 3 06:58:33.069847 [  (0*start) ][ Oct 03  6:58 ] Oct 3 06:58:33.081690 [  (0*start) ][ Oct 03  6:58 ] Oct 3 06:58:33.105788 [  (0*start) ][ Oct 03  6:58 ]                        [  (0*start) ][ Oct 03  6:58 ][  (0*start) ][ Oct 03  6:58 ] Oct 3 06:58:33.153816 [ 0- start  (2*shell) ][ Oct 03  6:58 ] Oct 3 06:58:33.165764 [ 0- start  (2*shell) ][ Oct 03  6:58 ] Oct 3 06:58:33.189763 [ 0- start  (2*shell) ][ Oct 03  6:58 ] Oct 3 06:58:33.201698 [ 0- start  (2*shell) ][ Oct 03  6:58 ]                        [ 0- start  (2*shell) ][ Oct 03  6:58 ][ 0- start  (2*shell) ][ Oct 03  6:58 ] Oct 3 06:58:33.249726 [ 0 start 2- shell  (3*shell) ][ Oct 03  6:58 ] Oct 3 06:58:33.273661 [ 0 start 2- shell  (3*shell) ][ Oct 03  6:58 ] Oct 3 06:58:33.285658 [ 0 start 2- shell  (3*shell) ][ Oct 03  6:58 ] Oct 3 06:58:33.297662 [ 0 start 2- shell  (3*shell) ][ Oct 03  6:58 ]                        [ 0 start 2- shell  (3*shell) ][ Oct 03  6:58 ][ 0 start 2- shell  (3*shell) ][ Oct 03  6:58 ] Oct 3 06:58:33.357829 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  6:58 ] Oct 3 06:58:33.369658 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  6:58 ] Oct 3 06:58:33.381761 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  6:58 ] Oct 3 06:58:33.393803 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  6:58 ]                        [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  6:58 ][ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  6:58 ] Oct 3 06:58:33.453748 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  6:58 ] Oct 3 06:58:33.465780 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  6:58 ] Oct 3 06:58:33.477658 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  6:58 ] Oct 3 06:58:33.489771 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  6:58 ]                        [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  6:58 ][ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  6:58 ] Oct 3 06:58:33.549698 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  6:58 ] Oct 3 06:58:33.561769 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  6:58 ] Oct 3 06:58:33.573662 [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  6:58 ] Oct 3 06:58:34.029765 Detecting network hardware ... 2%... 95%... 100% Oct 3 06:58:35.805589 Detecting link on eth0; please wait... ... 0%... 10%... 20% Oct 3 06:58:40.705115 Waiting for link-local address... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 100% Oct 3 06:58:42.764856 Attempting IPv6 autoconfiguration... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 75%... 83%... 91%... 100% Oct 3 06:58:48.832785 Configuring the network with DHCP ... 0%... 100% Oct 3 06:58:52.008798 [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  6:59 ] Checking the Debian archive mirror ... 25%... 50%... 75%... 100% Oct 3 06:59:00.144755 Loading additional components ... 0%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Oct 3 06:59:33.189806 Setting up the clock ... 0%... 100% Oct 3 06:59:35.925754 Loading additional components ... 50%... 100% Oct 3 06:59:37.593577 Detecting disks and all other hardware ... 2%... 95%... 100% Oct 3 06:59:42.205777 Loading additional components ... 12%... 25%... 37%... 50%... 62%... 75%... 87%... 100% Oct 3 06:59:49.289762 Loading additional components ... 25%... 50%... 75%... 100% Oct 3 06:59:51.672799 Starting up the partitioner ... 4%... 13%... 21%... 30%... 43%... 52%... 60%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  7:00 ]... 73%... 82%... 91%... 100% Oct 3 07:00:04.597762 Guided partitioning ... 16%... 33%... 50%... 66%... 83%... 100% Oct 3 07:00:12.873599 Starting up the partitioner ... 4%... 12%... 20%... 32%... 40%... 52%... 60%... 72%... 80%... 92%... 100% Oct 3 07:00:23.813742 Partitions formatting ... 33% Oct 3 07:00:32.576836 Partitions formatting Partitions formatting Installing the base system ... 0%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  7:01 ]... 17%... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  7:02 ]... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  7:03 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  7:04 ]... 48%... 50%...  Oct 3 07:04:28.941063  60%... 70%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  7:05 ]... 79%... 83%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  7:06 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  7:07 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  7:08 ]... 91%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  7:09 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  7:10 ]... 100% Oct 3 07:10:09.881443 Configuring apt ... 7%... 14%... 14%... 21%... 35%... 42%... 50%... 60%... 71%. Oct 3 07:10:46.949796 ... 82%... 92%... 100% Oct 3 07:10:49.517589 Select and install software ... 1%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  7:11 ]... 10%... 13%... 20%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  7:12 ]... 30%... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  7:13 ]... 50%... Oct 3 07:13:38.825767 . 60%... 70%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  7:14 ]... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  7:15 ]... 88%... 90%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  7:16 ]... 94%... 100% Oct 3 07:16:42.793752 Finishing the installation ... 4%... 12%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  7:17 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  7:18 ]... 16%... 20%... 32%... 40%... 44%... Oct 3 07:18:54.245696  52%... 60%... 72%... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  7:19 ]... 92% The system is going down NOW! Sent SIGKILL to all processes Oct 3 07:19:05.184850 Requesting system reboot Oct 3 07:19:05.185071 [ 1240.464500] reboot: Reű Oct 3 07:19:06.540826 Oct 3 07:19:06.540826 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 07:19:06.552889 Oct 3 07:19:06.552889 CPU: Exynos5250@1000MHz Oct 3 07:19:06.552889 Oct 3 07:19:06.552889 Board: Arndale Oct 3 07:19:06.552889 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 07:19:06.564962 ready Oct 3 07:19:06.565026 DRAM: 2 GiB Oct 3 07:19:06.565069 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 07:19:06.576857 trace: enabled Oct 3 07:19:06.612826 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 07:19:06.972816 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 07:19:07.032857 In: serial Oct 3 07:19:07.032857 Out: serial Oct 3 07:19:07.032857 Err: serial Oct 3 07:19:07.032857 SCSI: ARNDALE SCSI INIT Oct 3 07:19:07.044980 Target spinup took 0 ms. Oct 3 07:19:07.045043 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 07:19:07.056869 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 07:19:07.056869 Net: Net Initialization Skipped Oct 3 07:19:07.057095 No ethernet found. Oct 3 07:19:07.057112 Hostname: arndale-westfield Oct 3 07:19:07.068934 Hit any key to stop autoboot: 2  1  0 Oct 3 07:19:08.989735 (Re)start USB... Oct 3 07:19:08.989799 USB0: USB EHCI 1.00 Oct 3 07:19:08.989842 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 07:19:14.592875 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 07:19:14.592875 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 07:19:15.040824 Waiting for Ethernet connection... done. Oct 3 07:19:16.692148 BOOTP broadcast 1 Oct 3 07:19:16.692148 BOOTP broadcast 2 Oct 3 07:19:18.933016 DHCP client bound to address 10.149.64.45 (2343 ms) Oct 3 07:19:18.950365 Using asx0 device Oct 3 07:19:18.950435 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 07:19:18.950489 Filename 'pxelinux.0'. Oct 3 07:19:18.950496 Load address: 0x43e00000 Oct 3 07:19:18.956766 Loading: *### Oct 3 07:19:18.968840 2.4 MiB/s Oct 3 07:19:18.968840 done Oct 3 07:19:18.968840 Bytes transferred = 42430 (a5be hex) Oct 3 07:19:18.968840 missing environment variable: pxeuuid Oct 3 07:19:18.980872 Retrieving file: pxelinux.cfg/0A95402D Oct 3 07:19:18.980872 Using asx0 device Oct 3 07:19:18.980872 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 07:19:18.992883 Filename 'pxelinux.cfg/0A95402D'. Oct 3 07:19:18.992883 Load address: 0x51000000 Oct 3 07:19:18.992883 Loading: *# Oct 3 07:19:18.992883 31.3 KiB/s Oct 3 07:19:18.992883 done Oct 3 07:19:18.992883 Bytes transferred = 65 (41 hex) Oct 3 07:19:19.004862 Config file found Oct 3 07:19:19.005144 Ignoring unknown command: serial Oct 3 07:19:19.005208 1: local Oct 3 07:19:19.005213 scanning bus for devices... Oct 3 07:19:19.005213 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 07:19:19.016866 Type: Hard Disk Oct 3 07:19:19.016866 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 07:19:19.028928 Found 1 device(s). Oct 3 07:19:19.029013 Oct 3 07:19:19.029013 SCSI device 0: Oct 3 07:19:19.029013 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 07:19:19.040875 Type: Hard Disk Oct 3 07:19:19.040875 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 07:19:19.040875 ... is now current device Oct 3 07:19:19.052822 Scanning scsi 0... Oct 3 07:19:19.052822 Found U-Boot script /boot.scr Oct 3 07:19:19.160984 639 bytes read in 39 ms (15.6 KiB/s) Oct 3 07:19:19.208957 ## Executing script at 50000000 Oct 3 07:19:19.209015 Loading dtbs/exynos5250-arndale.dtb Oct 3 07:19:19.209060 46686 bytes read in 1102 ms (41 KiB/s) Oct 3 07:19:20.300846 Loading vmlinuz-6.1.0-25-armmp-lpae Oct 3 07:19:20.300846 5509632 bytes read in 185 ms (28.4 MiB/s) Oct 3 07:19:20.492853 Loading initrd.img-6.1.0-25-armmp-lpae Oct 3 07:19:20.492853 25732330 bytes read in 1899 ms (12.9 MiB/s) Oct 3 07:19:22.348947 Booting Oct 3 07:19:22.348947 Kernel image @ 0x42000000 [ 0x000000 - 0x541200 ] Oct 3 07:19:22.348947 ## Flattened Device Tree blob at 43000000 Oct 3 07:19:22.348947 Booting using the fdt blob at 0x43000000 Oct 3 07:19:22.348947 Loading Ramdisk to 4e775000, end 4ffff4ea ... OK Oct 3 07:19:22.768894 Loading Device Tree to 4e766000, end 4e77465d ... OK Oct 3 07:19:22.768894 Oct 3 07:19:22.780885 Starting kernel ...(fake run for tracing) Oct 3 07:19:22.780885 Oct 3 07:19:22.780885 Oct 3 07:19:22.780885 Starting kernel ... Oct 3 07:19:22.780885 Oct 3 07:19:22.780885 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 07:19:28.933737 [ 0.000000] Linux version 6.1.0-25-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.106-3 (2024-08-26) Oct 3 07:19:28.957763 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=30c5387d Oct 3 07:19:28.957827 [ 0.000000] CPU: div instructions available: patching division code Oct 3 07:19:28.969745 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 07:19:28.981732 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 07:19:28.981803 [ 0.000000] Memory policy: Data cache writealloc Oct 3 07:19:28.993735 [ 0.000000] efi: UEFI not found. Oct 3 07:19:28.993793 [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000 Oct 3 07:19:28.993842 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 07:19:29.005729 [ 0.000000] Zone ranges: Oct 3 07:19:29.005785 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 07:19:29.005834 [ 0.000000] Normal empty Oct 3 07:19:29.017736 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 07:19:29.017798 [ 0.000000] Movable zone start for each node Oct 3 07:19:29.017845 [ 0.000000] Early memory node ranges Oct 3 07:19:29.029753 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 07:19:29.029815 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 07:19:29.041739 [ 0.000000] percpu: Embedded 18 pages/cpu s44820 r8192 d20716 u73728 Oct 3 07:19:29.041836 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 07:19:29.053749 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=ttySAC2,115200n8 Oct 3 07:19:29.065756 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 07:19:29.065824 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 07:19:29.077740 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 07:19:29.089714 [ 0.000000] Memory: 2015504K/2097152K available (12288K kernel code, 1717K rwdata, 3748K rodata, 2048K init, 383K bss, 65264K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 07:19:29.101742 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 07:19:29.101806 [ 0.000000] ftrace: allocating 39996 entries in 118 pages Oct 3 07:19:29.113756 [ 0.000000] ftrace: allocated 118 pages with 5 groups Oct 3 07:19:29.113818 [ 0.000000] trace event string verifier disabled Oct 3 07:19:29.125747 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 07:19:29.125808 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 07:19:29.137753 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 07:19:29.137813 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 07:19:29.137860 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 07:19:29.149753 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 07:19:29.161751 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 07:19:29.161813 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 07:19:29.161861 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 07:19:29.173771 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 07:19:29.185756 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 07:19:29.185819 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 07:19:29.197762 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 07:19:29.197831 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 07:19:29.209769 [ 0.002624] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 07:19:29.221732 [ 0.002639] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 07:19:29.221807 [ 0.002653] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 07:19:29.233794 [ 0.002665] Ignoring duplicate/late registration of read_current_timer delay Oct 3 07:19:29.245749 [ 0.003034] Console: colour dummy device 80x30 Oct 3 07:19:29.245809 [ 0.003077] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 07:19:29.257761 [ 0.003090] CPU: Testing write buffer coherency: ok Oct 3 07:19:29.257821 [ 0.003133] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 07:19:29.269764 [ 0.003142] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 07:19:29.281734 [ 0.003148] pid_max: default: 32768 minimum: 301 Oct 3 07:19:29.281794 [ 0.003516] LSM: Security Framework initializing Oct 3 07:19:29.281842 [ 0.003589] landlock: Up and running. Oct 3 07:19:29.293748 [ 0.003594] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 07:19:29.293812 [ 0.003780] AppArmor: AppArmor initialized Oct 3 07:19:29.305748 [ 0.003793] TOMOYO Linux initialized Oct 3 07:19:29.305806 [ 0.003837] LSM support for eBPF active Oct 3 07:19:29.305852 [ 0.004086] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 07:19:29.317780 [ 0.004100] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 07:19:29.329727 [ 0.005510] /cpus/cpu@0 missing clock-frequency property Oct 3 07:19:29.329790 [ 0.005537] /cpus/cpu@1 missing clock-frequency property Oct 3 07:19:29.329838 [ 0.005549] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 07:19:29.341754 [ 0.006497] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 07:19:29.341821 [ 0.006503] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 07:19:29.353766 [ 0.006604] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 07:19:29.365811 [ 0.006609] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 07:19:29.365874 [ 0.006749] Setting up static identity map for 0x40400000 - 0x404000ac Oct 3 07:19:29.377802 [ 0.007907] rcu: Hierarchical SRCU implementation. Oct 3 07:19:29.377863 [ 0.007913] rcu: Max phase no-delay instances is 1000. Oct 3 07:19:29.377912 [ 0.010042] EFI services will not be available. Oct 3 07:19:29.389798 [ 0.010383] smp: Bringing up secondary CPUs ... Oct 3 07:19:29.389858 [ 0.011123] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 07:19:29.401796 [ 0.011135] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 07:19:29.401869 [ 0.011277] smp: Brought up 1 node, 2 CPUs Oct 3 07:19:29.413797 [ 0.011286] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 07:19:29.413861 [ 0.011293] CPU: All CPU(s) started in HYP mode. Oct 3 07:19:29.425805 [ 0.011297] CPU: Virtualization extensions available. Oct 3 07:19:29.425866 [ 0.012154] devtmpfs: initialized Oct 3 07:19:29.425911 [ 0.023142] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 07:19:29.437860 [ 0.023375] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 07:19:29.449805 [ 0.023400] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 07:19:29.449868 [ 0.023934] pinctrl core: initialized pinctrl subsystem Oct 3 07:19:29.461807 [ 0.024687] DMI not present or invalid. Oct 3 07:19:29.461866 [ 0.025362] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 07:19:29.473852 [ 0.026912] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 07:19:29.473917 [ 0.028442] audit: initializing netlink subsys (disabled) Oct 3 07:19:29.485812 [ 0.028645] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 Oct 3 07:19:29.485882 [ 0.029828] thermal_sys: Registered thermal governor 'fair_share' Oct 3 07:19:29.497812 [ 0.029836] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 07:19:29.497875 [ 0.029841] thermal_sys: Registered thermal governor 'step_wise' Oct 3 07:19:29.509794 [ 0.029845] thermal_sys: Registered thermal governor 'user_space' Oct 3 07:19:29.509856 [ 0.029850] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 07:19:29.521805 [ 0.030052] No ATAGs? Oct 3 07:19:29.521861 [ 0.030117] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 07:19:29.533801 [ 0.030125] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 07:19:29.533862 [ 0.031208] Serial: AMBA PL011 UART driver Oct 3 07:19:29.545788 [ 0.080597] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 07:19:29.545858 [ 0.087554] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 07:19:29.557809 [ 0.091823] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages Oct 3 07:19:29.557873 [ 0.091830] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page Oct 3 07:19:29.569814 [ 0.099024] iommu: Default domain type: Translated Oct 3 07:19:29.569874 [ 0.099032] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 07:19:29.581819 [ 0.100001] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 07:19:29.581902 [ 0.100509] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 07:19:29.593795 [ 0.100521] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 07:19:29.593859 [ 0.101059] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 07:19:29.605808 [ 0.101090] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 07:19:29.617817 [ 0.101318] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 07:19:29.617878 [ 0.101817] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 07:19:29.629793 [ 0.101828] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 07:19:29.629856 [ 0.102209] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 07:19:29.641815 [ 0.102500] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 07:19:29.641876 [ 0.102510] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 07:19:29.641926 [ 0.102823] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 07:19:29.653802 [ 0.102923] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 07:19:29.653862 [ 0.102932] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 07:19:29.665798 [ 0.103139] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 07:19:29.665859 [ 0.103359] pps_core: LinuxPPS API ver. 1 registered Oct 3 07:19:29.677805 [ 0.103365] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 07:19:29.677878 [ 0.103382] PTP clock support registered Oct 3 07:19:29.689794 [ 0.104917] NetLabel: Initializing Oct 3 07:19:29.689853 [ 0.104923] NetLabel: domain hash size = 128 Oct 3 07:19:29.689899 [ 0.104928] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 07:19:29.701825 [ 0.104982] NetLabel: unlabeled traffic allowed by default Oct 3 07:19:29.701887 [ 0.105155] vgaarb: loaded Oct 3 07:19:29.713795 [ 0.105675] clocksource: Switched to clocksource mct-frc Oct 3 07:19:29.713858 [ 0.106238] VFS: Disk quotas dquot_6.6.0 Oct 3 07:19:29.713905 [ 0.106323] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 07:19:29.725800 [ 0.107092] AppArmor: AppArmor Filesystem Enabled Oct 3 07:19:29.725860 [ 0.117016] NET: Registered PF_INET protocol family Oct 3 07:19:29.737805 [ 0.117209] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 07:19:29.737873 [ 0.118851] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 07:19:29.749820 [ 0.118950] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 07:19:29.761782 [ 0.118975] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 07:19:29.761851 [ 0.119074] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 07:19:29.773818 [ 0.119305] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 07:19:29.773881 [ 0.119538] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 07:19:29.785808 [ 0.119630] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 07:19:29.797828 [ 0.119670] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 07:19:29.797894 [ 0.119902] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 07:19:29.809806 [ 0.119935] NET: Registered PF_XDP protocol family Oct 3 07:19:29.809867 [ 0.119951] PCI: CLS 0 bytes, default 64 Oct 3 07:19:29.809913 [ 0.120438] Trying to unpack rootfs image as initramfs... Oct 3 07:19:29.821824 [ 0.120788] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 07:19:29.821893 [ 0.126217] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 07:19:29.833815 [ 0.193891] Initialise system trusted keyrings Oct 3 07:19:29.833874 [ 0.194014] Key type blacklist registered Oct 3 07:19:29.845802 [ 0.195251] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 07:19:29.845885 [ 0.203222] zbud: loaded Oct 3 07:19:29.857796 [ 0.204422] integrity: Platform Keyring initialized Oct 3 07:19:29.857858 [ 0.204454] integrity: Machine keyring initialized Oct 3 07:19:29.857905 [ 0.204464] Key type asymmetric registered Oct 3 07:19:29.869807 [ 0.204471] Asymmetric key parser 'x509' registered Oct 3 07:19:29.869867 [ 1.423130] Freeing initrd memory: 25132K Oct 3 07:19:29.869914 [ 1.445103] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 07:19:29.881826 [ 1.445370] bounce: pool size: 64 pages Oct 3 07:19:29.881885 [ 1.445549] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 07:19:29.893808 [ 1.445744] io scheduler mq-deadline registered Oct 3 07:19:29.893867 [ 1.450899] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 07:19:29.905808 [ 1.471801] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 07:19:29.917752 [ 1.471813] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 07:19:29.917826 [ 1.474162] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 07:19:29.929816 [ 1.474173] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 07:19:29.941826 [ 1.474967] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 07:19:29.941894 [ 1.474976] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 07:19:29.953808 [ 1.475786] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 07:19:29.965796 [ 1.475795] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 07:19:29.965868 [ 1.478141] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 07:19:29.977822 [ 1.480949] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 07:19:29.989807 [ 1.483734] Serial: AMBA driver Oct 3 07:19:29.989865 [ 1.483959] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 07:19:30.001842 [ 1.484431] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 07:19:30.013786 [ 1.484916] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 07:19:30.013859 [ 2.565641] printk: console [ttySAC2] enabled Oct 3 07:19:30.025799 [ 2.570451] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 07:19:30.025871 [ 2.581091] STM32 USART driver initialized Oct 3 07:19:30.037670 [ 2.595551] mousedev: PS/2 mouse device common for all mice Oct 3 07:19:30.049712 [ 2.626816] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 07:19:30.085794 [ 2.635452] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T07:19:30 UTC (1727939970) Oct 3 07:19:30.097727 [ 2.645276] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 07:19:30.097791 [ 2.652719] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 07:19:30.109739 [ 2.660717] NET: Registered PF_INET6 protocol family Oct 3 07:19:30.109800 [ 2.684714] Segment Routing with IPv6 Oct 3 07:19:30.133692 [ 2.686977] In-situ OAM (IOAM) with IPv6 Oct 3 07:19:30.145750 [ 2.690933] mip6: Mobile IPv6 Oct 3 07:19:30.145807 [ 2.693830] NET: Registered PF_PACKET protocol family Oct 3 07:19:30.145856 [ 2.698964] mpls_gso: MPLS GSO support Oct 3 07:19:30.157761 [ 2.702979] ThumbEE CPU extension supported. Oct 3 07:19:30.157821 [ 2.706833] Registering SWP/SWPB emulation handler Oct 3 07:19:30.157868 [ 2.712089] registered taskstats version 1 Oct 3 07:19:30.169709 [ 2.715707] Loading compiled-in X.509 certificates Oct 3 07:19:30.169770 [ 3.176173] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 07:19:30.637747 [ 3.183517] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 07:19:30.649735 [ 3.194635] zswap: loaded using pool lzo/zbud Oct 3 07:19:30.649795 [ 3.198475] Key type .fscrypt registered Oct 3 07:19:30.649841 [ 3.201824] Key type fscrypt-provisioning registered Oct 3 07:19:30.661681 [ 3.225964] Key type encrypted registered Oct 3 07:19:30.673705 [ 3.228515] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 07:19:30.685765 [ 3.234054] ima: No TPM chip found, activating TPM-bypass! Oct 3 07:19:30.685827 [ 3.239499] ima: Allocated hash algorithm: sha256 Oct 3 07:19:30.697755 [ 3.244204] ima: No architecture policies found Oct 3 07:19:30.697816 [ 3.248745] evm: Initialising EVM extended attributes: Oct 3 07:19:30.709750 [ 3.253790] evm: security.selinux Oct 3 07:19:30.709808 [ 3.257062] evm: security.SMACK64 (disabled) Oct 3 07:19:30.709855 [ 3.261337] evm: security.SMACK64EXEC (disabled) Oct 3 07:19:30.721731 [ 3.265937] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 07:19:30.721765 [ 3.270965] evm: security.SMACK64MMAP (disabled) Oct 3 07:19:30.721791 [ 3.275565] evm: security.apparmor Oct 3 07:19:30.733735 [ 3.278950] evm: security.ima Oct 3 07:19:30.733793 [ 3.281901] evm: security.capability Oct 3 07:19:30.733838 [ 3.285446] evm: HMAC attrs: 0x1 Oct 3 07:19:30.745662 [ 3.873011] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 07:19:31.333748 [ 3.879020] clk: Disabling unused clocks Oct 3 07:19:31.333819 [ 3.891842] Freeing unused kernel image (initmem) memory: 2048K Oct 3 07:19:31.345762 [ 3.896707] Checked W+X mappings: passed, no W+X pages found Oct 3 07:19:31.357701 [ 3.901958] Run /init as init process Oct 3 07:19:31.357760 Loading, please wait... Oct 3 07:19:31.381682 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 07:19:31.465720 [ 4.838740] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 07:19:32.293806 [ 4.853583] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 07:19:32.305779 [ 4.870075] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 07:19:32.329759 [ 4.888011] Synopsys Designware Multimedia Card Interface Driver Oct 3 07:19:32.341798 [ 4.893870] usbcore: registered new interface driver usbfs Oct 3 07:19:32.353751 [ 4.908757] usbcore: registered new interface driver hub Oct 3 07:19:32.365770 [ 4.919331] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 07:19:32.377751 [ 4.935482] usbcore: registered new device driver usb Oct 3 07:19:32.389757 [ 4.965547] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 07:19:32.425806 [ 4.971235] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 07:19:32.425870 [ 4.977432] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 07:19:32.437769 [ 4.982859] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 07:19:32.437834 [ 4.989232] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 07:19:32.449745 [ 4.990268] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo Oct 3 07:19:32.449818 [ 5.015120] mmc_host mmc0: card is polling. Oct 3 07:19:32.473711 [ 5.019096] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 07:19:32.473773 [ 5.029754] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 07:19:32.485750 [ 5.065324] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo Oct 3 07:19:32.521738 [ 5.093656] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 07:19:32.557678 [ 5.123133] phy phy-12130000.phy.2: phy_power_on was called before phy_init Oct 3 07:19:32.581749 [ 5.130052] phy phy-12130000.phy.2: phy_power_on was called before phy_init Oct 3 07:19:32.581846 [ 5.137906] exynos-ohci 12120000.usb: USB Host Controller Oct 3 07:19:32.593749 [ 5.144125] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 07:19:32.593810 [ 5.149364] SCSI subsystem initialized Oct 3 07:19:32.605731 [ 5.149641] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Oct 3 07:19:32.605800 [ 5.159785] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Oct 3 07:19:32.617742 [ 5.171665] exynos-ehci 12110000.usb: irq 109, io mem 0x12110000 Oct 3 07:19:32.629761 [ 5.176445] exynos-ohci 12120000.usb: irq 109, io mem 0x12120000 Oct 3 07:19:32.629824 [ 5.183813] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 07:19:32.641735 [ 5.201729] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 07:19:32.653725 [ 5.206569] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 07:19:32.665746 [ 5.214599] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 07:19:32.677751 [ 5.221775] usb usb2: Product: EHCI Host Controller Oct 3 07:19:32.677811 [ 5.226616] usb usb2: Manufacturer: Linux 6.1.0-25-armmp-lpae ehci_hcd Oct 3 07:19:32.689760 [ 5.233123] usb usb2: SerialNumber: 12110000.usb Oct 3 07:19:32.689820 [ 5.233147] mmc0: new DDR MMC card at address 0001 Oct 3 07:19:32.689868 [ 5.242971] hub 2-0:1.0: USB hub found Oct 3 07:19:32.701718 [ 5.252148] hub 2-0:1.0: 3 ports detected Oct 3 07:19:32.701777 [ 5.257089] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 07:19:32.713751 [ 5.257637] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 07:19:32.725740 [ 5.271313] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 07:19:32.725807 [ 5.278497] usb usb1: Product: USB Host Controller Oct 3 07:19:32.737744 [ 5.283125] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Oct 3 07:19:32.737805 [ 5.283259] usb usb1: Manufacturer: Linux 6.1.0-25-armmp-lpae ohci_hcd Oct 3 07:19:32.749745 [ 5.294277] usb usb1: SerialNumber: 12120000.usb Oct 3 07:19:32.749805 [ 5.298921] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 07:19:32.761744 [ 5.312116] mmc1: new high speed SDHC card at address aaaa Oct 3 07:19:32.761806 [ 5.320423] mmcblk0: p1 p2 p3 p4 Oct 3 07:19:32.773732 [ 5.322336] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Oct 3 07:19:32.773791 [ 5.330360] hub 1-0:1.0: USB hub found Oct 3 07:19:32.785762 [ 5.332775] hub 1-0:1.0: 3 ports detected Oct 3 07:19:32.785821 [ 5.336913] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 07:19:32.797731 [ 5.360611] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 07:19:32.821725 [ 5.372982] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Oct 3 07:19:32.821785 [ 5.373970] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 07:19:32.833774 [ 5.383613] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Oct 3 07:19:32.845779 [ 5.392392] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 07:19:32.857690 [ 5.405527] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Oct 3 07:19:32.857751 [ 5.429156] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (241:0) Oct 3 07:19:32.881738 [ 5.450657] scsi host0: ahci-dwc Oct 3 07:19:32.905762 [ 5.452914] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 110 Oct 3 07:19:32.905832 [ 5.659125] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 07:19:33.121690 [ 5.729317] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 07:19:33.193668 [ 5.837773] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 07:19:33.301714 [ 5.937720] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 07:19:33.397770 [ 5.943332] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 07:19:33.397836 [ 5.949161] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 07:19:33.409739 [ 5.955682] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 07:19:33.421735 [ 5.965800] ata1.00: configured for UDMA/133 Oct 3 07:19:33.421795 [ 5.969852] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 07:19:33.433668 [ 6.023010] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 07:19:33.481729 [ 6.029847] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 07:19:33.481798 [ 6.036738] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 07:19:33.493769 [ 6.045519] xhci-hcd xhci-hcd.2.auto: irq 111, io mem 0x12000000 Oct 3 07:19:33.505737 [ 6.051692] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 07:19:33.505799 [ 6.056948] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 07:19:33.517779 [ 6.064613] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 07:19:33.517843 [ 6.065049] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 07:19:33.529767 [ 6.071464] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 07:19:33.541759 [ 6.088609] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 07:19:33.541826 [ 6.095807] usb usb3: Product: xHCI Host Controller Oct 3 07:19:33.553732 [ 6.100659] usb usb3: Manufacturer: Linux 6.1.0-25-armmp-lpae xhci-hcd Oct 3 07:19:33.553795 [ 6.107171] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 07:19:33.565747 [ 6.114951] hub 3-0:1.0: USB hub found Oct 3 07:19:33.565806 [ 6.117283] hub 3-0:1.0: 1 port detected Oct 3 07:19:33.577752 [ 6.122472] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 07:19:33.577822 [ 6.129400] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 07:19:33.589760 [ 6.137507] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 07:19:33.601752 [ 6.144714] usb usb4: Product: xHCI Host Controller Oct 3 07:19:33.601814 [ 6.149552] usb usb4: Manufacturer: Linux 6.1.0-25-armmp-lpae xhci-hcd Oct 3 07:19:33.601866 [ 6.156064] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 07:19:33.613764 [ 6.163185] hub 4-0:1.0: USB hub found Oct 3 07:19:33.613822 [ 6.165526] hub 4-0:1.0: 1 port detected Oct 3 07:19:33.625748 [ 6.166485] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 07:19:33.625818 [ 6.176899] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 07:19:33.637755 [ 6.182176] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 07:19:33.637828 [ 6.191385] sd 0:0:0:0: [sda] Write Protect is off Oct 3 07:19:33.649751 [ 6.191486] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 07:19:33.661703 [ 6.206083] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 07:19:33.661767 [ 6.226635] sda: sda1 sda2 < sda5 > Oct 3 07:19:33.685715 [ 6.229468] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 07:19:33.685776 [ 6.296226] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 07:19:33.757717 [ 6.404224] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 07:19:33.865708 [ 6.512195] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 07:19:33.973704 [ 6.620189] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 07:19:34.081710 [ 7.028768] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 07:19:34.489702 [ 7.136364] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 07:19:34.597719 [ 7.261697] random: crng init done Oct 3 07:19:34.717706 [ 7.370792] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. Oct 3 07:19:34.837736 [ 7.381730] device-mapper: uevent: version 1.0.3 Oct 3 07:19:34.837797 [ 7.386339] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Oct 3 07:19:34.849690 [ 7.744405] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 07:19:35.197726 Begin: Loading essential drivers ... done. Oct 3 07:19:35.569676 Begin: Running /scripts/init-premount ... done. Oct 3 07:19:38.581717 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 07:19:38.593742 Begin: Running /scripts/local-premount ... done. Oct 3 07:19:38.641671 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 07:19:38.677687 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 07:19:38.761777 /dev/mapper/arndale--westfield--vg-root: clean, 39343/1220608 files, 378246/4882432 blocks Oct 3 07:19:38.965738 done. Oct 3 07:19:38.977679 [ 11.654842] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 07:19:39.109728 [ 11.844602] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 07:19:39.301739 done. Oct 3 07:19:39.301791 Begin: Running /scripts/local-bottom ... done. Oct 3 07:19:39.337706 Begin: Running /scripts/init-bottom ... done. Oct 3 07:19:39.385680 [ 12.159956] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. Oct 3 07:19:39.613748 INIT: version 3.06 booting Oct 3 07:19:39.973665 INIT: No inittab.d directory found Oct 3 07:19:40.069667 Using makefile-style concurrent boot in runlevel S. Oct 3 07:19:40.381708 Starting hotplug events dispatcher: systemd-udevd. Oct 3 07:19:42.080844 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 07:19:42.320956 Synthesizing the initial hotplug events (devices)...done. Oct 3 07:19:42.836942 Waiting for /dev to be fully populated...[ 15.625716] usb3503 usb-hub: switched to HUB mode Oct 3 07:19:43.080913 [ 15.628947] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 07:19:43.080913 [ 15.653579] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Oct 3 07:19:43.116847 [ 15.686531] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 07:19:43.140923 [ 15.778697] sd 0:0:0:0: Attached scsi generic sg0 type 0 Oct 3 07:19:43.236847 [ 15.902580] panfrost 11800000.gpu: clock rate = 533000000 Oct 3 07:19:43.353838 [ 15.919336] panfrost 11800000.gpu: mali-t600 id 0x600 major 0x0 minor 0x0 status 0x1 Oct 3 07:19:43.381022 [ 15.925657] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,31b4dfff Oct 3 07:19:43.381092 [ 15.933782] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 Oct 3 07:19:43.392915 [ 15.945550] panfrost 11800000.gpu: shader_present=0xf l2_present=0x1 Oct 3 07:19:43.404903 [ 15.951921] usb 2-3: new high-speed USB device number 2 using exynos-ehci Oct 3 07:19:43.404903 [ 15.969612] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 0 Oct 3 07:19:43.429054 [ 15.975696] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 07:19:43.440843 [ 16.046322] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 07:19:43.500893 [ 16.126126] usb 2-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Oct 3 07:19:43.585069 [ 16.132936] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 3 07:19:43.596840 [ 16.140689] hub 2-3:1.0: USB hub found Oct 3 07:19:43.596840 [ 16.143910] hub 2-3:1.0: 3 ports detected Oct 3 07:19:43.596840 [ 16.154823] blk_print_req_error: 6 callbacks suppressed Oct 3 07:19:43.608941 [ 16.154834] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 07:19:43.620862 [ 16.268155] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 07:19:43.728861 [ 16.376370] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 07:19:43.837037 [ 16.438811] usb 2-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 07:19:43.897046 [ 16.484775] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 07:19:43.944979 [ 16.536373] OF: graph: no port node found in /soc/hdmi@14530000 Oct 3 07:19:43.992861 [ 16.567794] usb 2-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=77.32 Oct 3 07:19:44.028910 [ 16.574843] usb 2-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Oct 3 07:19:44.028910 [ 16.582079] usb 2-3.2: Product: USB2.0 Hub Oct 3 07:19:44.040831 [ 16.598450] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 07:19:44.052891 [ 16.613882] hub 2-3.2:1.0: USB hub found Oct 3 07:19:44.064860 [ 16.620274] hub 2-3.2:1.0: 4 ports detected Oct 3 07:19:44.076955 [ 16.706667] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 07:19:44.160873 [ 16.814976] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 07:19:44.268890 [ 16.917929] usb 2-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 07:19:44.376908 [ 16.923940] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 07:19:44.388830 [ 17.051913] usb 2-3.2.4: New USB device found, idVendor=0b95, idProduct=772a, bcdDevice= 0.01 Oct 3 07:19:44.508904 [ 17.059291] usb 2-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Oct 3 07:19:44.520909 [ 17.066569] usb 2-3.2.4: Product: AX88772 Oct 3 07:19:44.520909 [ 17.070637] usb 2-3.2.4: Manufacturer: ASIX Elec. Corp. Oct 3 07:19:44.520909 [ 17.075887] usb 2-3.2.4: SerialNumber: 000001 Oct 3 07:19:44.532852 [ 17.335971] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 07:19:44.796860 [ 17.450416] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 07:19:44.904882 [ 17.633575] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 07:19:45.096837 [ 18.059809] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 07:19:45.516864 [ 18.364580] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 07:19:45.829052 [ 18.380120] Asix Electronics AX88772A usb-002:004:10: attached PHY driver (mii_bus:phy_addr=usb-002:004:10, irq=POLL) Oct 3 07:19:45.841066 [ 18.391962] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, ee:6b:67:ac:af:c7 Oct 3 07:19:45.853063 [ 18.410049] usbcore: registered new interface driver asix Oct 3 07:19:45.865014 done. Oct 3 07:19:46.152995 [ 19.171019] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 07:19:46.621040 Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). Oct 3 07:19:46.657032 Checking file systems.../dev/sda1: clean, 922/61056 files, 25403/243968 blocks Oct 3 07:19:48.024950 done. Oct 3 07:19:48.060830 Cleaning up temporary files... /tmp. Oct 3 07:19:48.300850 [ 21.084343] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 07:19:48.540847 [ 21.133333] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 07:19:48.588901 [ 21.388506] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k FS Oct 3 07:19:48.844897 Mounting local filesystems...done. Oct 3 07:19:49.204863 Activating swapfile swap, if any...done. Oct 3 07:19:49.216845 Cleaning up temporary files.... Oct 3 07:19:49.276835 Starting Setting kernel variables: sysctl. Oct 3 07:19:49.468831 [ 22.584500] audit: type=1400 audit(1727939990.156:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=891 comm="apparmor_parser" Oct 3 07:19:50.044891 [ 22.606101] audit: type=1400 audit(1727939990.172:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=891 comm="apparmor_parser" Oct 3 07:19:50.068900 [ 22.622164] audit: type=1400 audit(1727939990.180:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=890 comm="apparmor_parser" Oct 3 07:19:50.080910 [ 22.809364] asix 2-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 07:19:50.260837 [ 22.960246] audit: type=1400 audit(1727939990.532:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=935 comm="apparmor_parser" Oct 3 07:19:50.428907 [ 22.974397] audit: type=1400 audit(1727939990.532:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=935 comm="apparmor_parser" Oct 3 07:19:50.440905 [ 22.988692] audit: type=1400 audit(1727939990.532:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=935 comm="apparmor_parser" Oct 3 07:19:50.452870 [ 23.346441] audit: type=1400 audit(1727939990.920:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=931 comm="apparmor_parser" Oct 3 07:19:50.812879 [ 23.365723] audit: type=1400 audit(1727939990.920:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=931 comm="apparmor_parser" Oct 3 07:19:50.836914 [ 23.381575] audit: type=1400 audit(1727939990.920:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=931 comm="apparmor_parser" Oct 3 07:19:50.848836 [ 23.399140] audit: type=1400 audit(1727939990.920:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=931 comm="apparmor_parser" Oct 3 07:19:50.860905 Starting: AppArmorLoading AppArmor profiles...done. Oct 3 07:19:50.872836 . Oct 3 07:19:50.872836 [ 24.967405] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 07:19:52.421794 [ 24.973558] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 3 07:19:52.421867 Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1 Oct 3 07:19:54.125788 Copyright 2004-2022 Internet Systems Consortium. Oct 3 07:19:54.125848 All rights reserved. Oct 3 07:19:54.137750 For info, please visit https://www.isc.org/software/dhcp/ Oct 3 07:19:54.137812 Oct 3 07:19:54.137851 Listening on LPF/eth0/a6:46:13:77:e8:2f Oct 3 07:19:54.137896 Sending on LPF/eth0/a6:46:13:77:e8:2f Oct 3 07:19:54.149747 Sending on Socket/fallback Oct 3 07:19:54.149803 Created duid "\000\001\000\001.\221\002\026\246F\023w\350/". Oct 3 07:19:54.149853 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 Oct 3 07:19:54.161701 [ 28.640992] exynos4-fb 14400000.fimd: deferred probe timeout, ignoring dependency Oct 3 07:19:56.093734 [ 28.652677] exynos-mixer 14450000.mixer: deferred probe timeout, ignoring dependency Oct 3 07:19:56.105758 [ 28.660530] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations Oct 3 07:19:56.117763 [ 28.666916] exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm]) Oct 3 07:19:56.117860 [ 28.675389] exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm]) Oct 3 07:19:56.129730 [ 28.685029] exynos-drm exynos-drm: bound 14500000.dsi (ops hdmi_enable [exynosdrm]) Oct 3 07:19:56.141782 [ 28.691885] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm]) Oct 3 07:19:56.141850 [ 28.712270] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 07:19:56.165765 [ 28.717558] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 07:19:56.165828 [ 28.724514] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 Oct 3 07:19:56.177747 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 Oct 3 07:19:57.968894 DHCPOFFER of 10.149.64.45 from 10.149.64.4 Oct 3 07:19:57.980922 DHCPREQUEST for 10.149.64.45 on eth0 to 255.255.255.255 port 67 Oct 3 07:19:57.980922 DHCPACK of 10.149.64.45 from 10.149.64.4 Oct 3 07:19:57.980922 bound to 10.149.64.45 -- renewal in 243 seconds. Oct 3 07:19:57.992877 done. Oct 3 07:19:57.992877 Cleaning up temporary files.... Oct 3 07:19:58.040858 Starting nftables: none Oct 3 07:19:58.148856 . Oct 3 07:19:58.536832 INIT: Entering runlevel: 2 Oct 3 07:19:58.584844 Using makefile-style concurrent boot in runlevel 2. Oct 3 07:19:58.620876 Starting Apache httpd web server: apache2. Oct 3 07:20:00.637763 Starting periodic command scheduler: cron. Oct 3 07:20:01.081744 Starting NTP server: ntpd2024-10-03T07:20:01 ntpd[1129]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 07:20:01.141787 2024-10-03T07:20:01 ntpd[1129]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 07:20:01.153733 . Oct 3 07:20:01.153784 Starting system message bus: dbus. Oct 3 07:20:01.537750 Starting OpenBSD Secure Shell server: sshd. Oct 3 07:20:01.933675 Oct 3 07:20:02.989808 Debian GNU/Linux 12 arndale-westfield ttySAC2 Oct 3 07:20:03.001732 Oct 3 07:20:03.001802 arndale-westfield login: INIT: Switching to r INIT: No inittab.d directory found Oct 3 07:25:07.981819 INIUsing makefile-style concurrent boot in runlevel 6. Oct 3 07:25:08.065711 Stopping SMP IRQ Balancer: irqbalance. Oct 3 07:25:08.125716 Stopping hotplug events dispatcher: systemd-udevd. Oct 3 07:25:08.137745 Stopping nftables: none. Oct 3 07:25:08.149693 Saving the system clock to /dev/rtc0. Oct 3 07:25:09.033794 Hardware Clock updated to Thu Oct 3 07:25:09 UTC 2024. Oct 3 07:25:09.033876 Stopping Apache httpd web server: apache2. Oct 3 07:25:09.273701 Asking all remaining processes to terminate...done. Oct 3 07:25:09.633721 All processes ended within 1 seconds...done. Oct 3 07:25:09.633781 Deconfiguring network interfaces...ifdown: ignoring unknown interface eth0=eth0 Oct 3 07:25:09.741885 done. Oct 3 07:25:09.753987 [ 342.473404] EXT4-fs (sda1): unmounting filesystem. Oct 3 07:25:09.921706 Deactivating swap...done. Oct 3 07:25:09.985738 Unmounting local filesystems...done. Oct 3 07:25:09.985818 [ 342.764730] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 07:25:10.213725 Will now restart. Oct 3 07:25:10.509693 [ 343.084202] asix 2-3.2.4:1.0 eth0: Link is Down Oct 3 07:25:10.537684 [ 343.154795] sd 0:0:0:0: [sda] Synchronizing SCSI cache Oct 3 07:25:10.597700 [ 343.162486] wake enabled for irq 101 (gpx1-4) Oct 3 07:25:10.613799 [ 343.165370] wake enabled for irq 102 (gpx1-5) Oct 3 07:25:10.613832 [ 343.169732] wake enabled for irq 103 (gpx1-6) Oct 3 07:25:10.613858 [ 343.174066] wake enabled for irq 104 (gpx1-7) Oct 3 07:25:10.625843 [ 343.178406] wake enabled for irq 105 (gpx2-0) Oct 3 07:25:10.625905 [ 343.182752] wake enabled for irq 106 (gpx2-1) Oct 3 07:25:10.637712 [ 343.187576] reboot: Reó Oct 3 07:25:10.973753 Oct 3 07:25:10.973777 Oct 3 07:25:10.973844 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 07:25:10.973897 Oct 3 07:25:10.973935 CPU: Exynos5250@1000MHz Oct 3 07:25:10.974010 Oct 3 07:25:10.974051 Board: Arndale Oct 3 07:25:10.974092 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 07:25:10.985810 ready Oct 3 07:25:10.985818 DRAM: 2 GiB Oct 3 07:25:10.985843 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 07:25:10.997757 trace: enabled Oct 3 07:25:11.033688 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 07:25:11.405683 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 07:25:11.453719 In: serial Oct 3 07:25:11.453773 Out: serial Oct 3 07:25:11.453814 Err: serial Oct 3 07:25:11.465727 SCSI: ARNDALE SCSI INIT Oct 3 07:25:11.465783 Target spinup took 0 ms. Oct 3 07:25:11.465827 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 07:25:11.477758 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 07:25:11.477820 Net: Net Initialization Skipped Oct 3 07:25:11.477864 No ethernet found. Oct 3 07:25:11.489690 Hostname: arndale-westfield Oct 3 07:25:11.489729 Hit any key to stop autoboot: 2  1  0 Oct 3 07:25:13.413725 (Re)start USB... Oct 3 07:25:13.413772 USB0: USB EHCI 1.00 Oct 3 07:25:13.413795 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 07:25:19.017717 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 07:25:19.019680 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 07:25:19.461698 Waiting for Ethernet connection... done. Oct 3 07:25:21.069687 BOOTP broadcast 1 Oct 3 07:25:21.069742 BOOTP broadcast 2 Oct 3 07:25:22.305776 DHCP client bound to address 10.149.64.45 (1293 ms) Oct 3 07:25:22.305849 Using asx0 device Oct 3 07:25:22.305892 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 07:25:22.317633 Filename 'pxelinux.0'. Oct 3 07:25:22.317664 Load address: 0x43e00000 Oct 3 07:25:22.317688 Loading: *### Oct 3 07:25:22.329683 2.4 MiB/s Oct 3 07:25:22.341763 done Oct 3 07:25:22.341816 Bytes transferred = 42430 (a5be hex) Oct 3 07:25:22.341863 missing environment variable: pxeuuid Oct 3 07:25:22.341909 Retrieving file: pxelinux.cfg/0A95402D Oct 3 07:25:22.341954 Using asx0 device Oct 3 07:25:22.353769 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 07:25:22.353833 Filename 'pxelinux.cfg/0A95402D'. Oct 3 07:25:22.353879 Load address: 0x51000000 Oct 3 07:25:22.353922 Loading: *# Oct 3 07:25:22.365774 31.3 KiB/s Oct 3 07:25:22.365830 done Oct 3 07:25:22.365871 Bytes transferred = 65 (41 hex) Oct 3 07:25:22.365916 Config file found Oct 3 07:25:22.365957 Ignoring unknown command: serial Oct 3 07:25:22.366001 1: local Oct 3 07:25:22.366041 scanning bus for devices... Oct 3 07:25:22.377705 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 07:25:22.401722 Type: Hard Disk Oct 3 07:25:22.401779 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 07:25:22.401829 Found 1 device(s). Oct 3 07:25:22.413750 Oct 3 07:25:22.413802 SCSI device 0: Oct 3 07:25:22.413845 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 07:25:22.413895 Type: Hard Disk Oct 3 07:25:22.413937 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 07:25:22.425730 ... is now current device Oct 3 07:25:22.425788 Scanning scsi 0... Oct 3 07:25:22.425831 Found U-Boot script /boot.scr Oct 3 07:25:22.605669 1755 bytes read in 43 ms (39.1 KiB/s) Oct 3 07:25:22.653747 ## Executing script at 50000000 Oct 3 07:25:22.653805 Loading dtbs/6.1.112+/exynos5250-arndale.dtb Oct 3 07:25:22.665657 46686 bytes read in 952 ms (47.9 KiB/s) Oct 3 07:25:23.601675 1081360 bytes read in 113 ms (9.1 MiB/s) Oct 3 07:25:23.721735 Loaded xen-4.20-unstable to 0x41000000 (108010) Oct 3 07:25:23.733750 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan sched=credit Oct 3 07:25:23.745690 10039808 bytes read in 528 ms (18.1 MiB/s) Oct 3 07:25:24.273835 Loaded vmlinuz-6.1.112+ to 0x42000000 (993200) Oct 3 07:25:24.273879 command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 07:25:24.285789 12059089 bytes read in 645 ms (17.8 MiB/s) Oct 3 07:25:24.945790 Loaded initrd.img-6.1.112+ to 0x43300000 (b801d1) Oct 3 07:25:24.945873 chosen { Oct 3 07:25:24.945914 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan sched=credit"; Oct 3 07:25:24.957773 #size-cells = <0x00000001>; Oct 3 07:25:24.957829 #address-cells = <0x00000001>; Oct 3 07:25:24.969740 stdout-path = "serial2:115200n8"; Oct 3 07:25:24.969799 module@1 { Oct 3 07:25:24.969841 reg = <0x43300000 0x00b801d1>; Oct 3 07:25:24.969883 compatible = "xen,linux-initrd", "xen,multiboot-module"; Oct 3 07:25:24.981785 }; Oct 3 07:25:24.981838 module@0 { Oct 3 07:25:24.981879 bootargs = "ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Oct 3 07:25:24.993796 reg = <0x42000000 0x00993200>; Oct 3 07:25:24.993853 compatible = "xen,linux-zimage", "xen,multiboot-module"; Oct 3 07:25:25.005778 }; Oct 3 07:25:25.005831 }; Oct 3 07:25:25.005870 Booting 0x41000000 - 0x43000000 Oct 3 07:25:25.005914 Kernel image @ 0x41000000 [ 0x000000 - 0x144000 ] Oct 3 07:25:25.017812 ## Flattened Device Tree blob at 43000000 Oct 3 07:25:25.017873 Booting using the fdt blob at 0x43000000 Oct 3 07:25:25.017919 reserving fdt memory region: addr=43000000 size=c000 Oct 3 07:25:25.029760 Loading Device Tree to 4fff1000, end 4fffffff ... OK Oct 3 07:25:25.029821 Oct 3 07:25:25.029860 Starting kernel ...(fake run for tracing) Oct 3 07:25:25.041731 Oct 3 07:25:25.041782 Oct 3 07:25:25.041821 Starting kernel ... Oct 3 07:25:25.041862 Oct 3 07:25:25.041899 __ __ _ _ ____ ___ _ _ _ Oct 3 07:25:25.089779 \ \/ /___ _ __ | || | |___ \ / _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Oct 3 07:25:25.101773 \ // _ \ '_ \ | || |_ __) | | | |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Oct 3 07:25:25.101836 / \ __/ | | | |__ _| / __/| |_| |__| |_| | | | \__ \ || (_| | |_) | | __/ Oct 3 07:25:25.113797 /_/\_\___|_| |_| |_|(_)_____|\___/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Oct 3 07:25:25.125758 Oct 3 07:25:25.125758 (XEN) Xen version 4.20-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Thu Oct 3 04:21:25 UTC 2024 Oct 3 07:25:25.137717 (XEN) Latest ChangeSet: Fri Feb 17 17:01:22 2023 +0000 git:41190d2ceb Oct 3 07:25:25.137752 (XEN) build-id: 0a6b28d2d81aa30d09bfdfdea57218d3715bb897 Oct 3 07:25:25.137778 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Oct 3 07:25:25.149691 (XEN) 32-bit Execution: Oct 3 07:25:25.149722 (XEN) Processor Features: 00001031:00011011 Oct 3 07:25:25.149747 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Oct 3 07:25:25.161688 (XEN) Extensions: GenericTimer Security Oct 3 07:25:25.161721 (XEN) Debug Features: 02010555 Oct 3 07:25:25.161744 (XEN) Auxiliary Features: 00000000 Oct 3 07:25:25.173686 (XEN) Memory Model Features: 10201105 20000000 Oct 3 07:25:25.173719 (XEN) 01240000 02102211 Oct 3 07:25:25.173744 (XEN) ISA Features: 02101110 13112111 21232041 Oct 3 07:25:25.185688 (XEN) 11112131 10011142 00000000 Oct 3 07:25:25.185720 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Oct 3 07:25:25.197687 (XEN) Set SYSRAM to 0000000041000070 (00200070) Oct 3 07:25:25.197718 (XEN) SMP: Allowing 2 CPUs Oct 3 07:25:25.209683 (XEN) enabled workaround for: ARM erratum 766422 Oct 3 07:25:25.209717 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Oct 3 07:25:25.209757 (XEN) GICv2 initialization: Oct 3 07:25:25.221677 (XEN) gic_dist_addr=0000000010481000 Oct 3 07:25:25.221709 (XEN) gic_cpu_addr=0000000010482000 Oct 3 07:25:25.221734 (XEN) gic_hyp_addr=0000000010484000 Oct 3 07:25:25.233678 (XEN) gic_vcpu_addr=0000000010486000 Oct 3 07:25:25.233711 (XEN) gic_maintenance_irq=25 Oct 3 07:25:25.233736 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Oct 3 07:25:25.245684 (XEN) Using scheduler: SMP Credit Scheduler (credit) Oct 3 07:25:25.245717 (XEN) Allocated console ring of 16 KiB. Oct 3 07:25:25.245742 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Oct 3 07:25:25.257683 (XEN) CPU0: Guest atomics will try 1 times before pausing the domain Oct 3 07:25:25.257718 (XEN) Bringing up CPU1 Oct 3 07:25:25.257742 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Oct 3 07:25:25.269689 (XEN) Brought up 2 CPUs Oct 3 07:25:25.269720 (XEN) CPU 1 booted. Oct 3 07:25:25.269743 (XEN) I/O virtualisation disabled Oct 3 07:25:25.281684 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Oct 3 07:25:25.281717 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Oct 3 07:25:25.281744 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Oct 3 07:25:25.293688 (XEN) alternatives: Patching with alt table 002d2f0c -> 002d2fe4 Oct 3 07:25:25.293722 (XEN) CPU0 will execute ICIALLU on guest exit Oct 3 07:25:25.305685 (XEN) CPU1 will execute ICIALLU on guest exit Oct 3 07:25:25.305717 (XEN) *** LOADING DOMAIN 0 *** Oct 3 07:25:25.305741 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Oct 3 07:25:25.317687 (XEN) Loading ramdisk from boot module @ 0000000043300000 Oct 3 07:25:25.317721 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Oct 3 07:25:25.317747 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Oct 3 07:25:25.905670 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Oct 3 07:25:25.905709 (XEN) Allocating PPI 16 for event channel interrupt Oct 3 07:25:25.941680 (XEN) d0: extended regions not supported for 32-bit guests Oct 3 07:25:25.941714 (XEN) Loading zImage from 0000000042000000 to 0000000067600000-0000000067f93200 Oct 3 07:25:25.953629 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d801d1 Oct 3 07:25:26.037669 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b4c2 Oct 3 07:25:26.133663 (XEN) Initial low memory virq threshold set at 0x4000 pages. Oct 3 07:25:26.145614 (XEN) Scrubbing Free RAM in background Oct 3 07:25:26.145646 (XEN) Std. Loglevel: All Oct 3 07:25:26.145721 (XEN) Guest Loglevel: All Oct 3 07:25:26.145723 (XEN) *************************************************** Oct 3 07:25:26.157683 (XEN) WARNING: SILO mode is not enabled. Oct 3 07:25:26.157715 (XEN) It has implications on the security of the system, Oct 3 07:25:26.169699 (XEN) unless the communications have been forbidden between Oct 3 07:25:26.169733 (XEN) untrusted domains. Oct 3 07:25:26.169756 (XEN) *************************************************** Oct 3 07:25:26.181625 (XEN) 3... 2... 1... Oct 3 07:25:29.181554 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 07:25:29.193611 (XEN) Freed 356kB init memory. Oct 3 07:25:29.193648 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 07:25:30.271487 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Oct 3 07:25:30.276880 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Oct 3 07:25:30.276943 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Oct 3 07:25:30.288883 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Oct 3 07:25:30.288946 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:25:30.300829 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 07:25:30.336848 [ 0.000000] Linux version 6.1.112+ (osstest@himrod0) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Thu Oct 3 02:31:58 UTC 2024 Oct 3 07:25:30.360918 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 07:25:30.360986 [ 0.000000] CPU: div instructions available: patching division code Oct 3 07:25:30.372883 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 07:25:30.372949 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 07:25:30.384805 [ 0.000000] Memory policy: Data cache writealloc Oct 3 07:25:30.384866 [ 0.000000] Xen 4.20 support found Oct 3 07:25:30.396720 [ 0.000000] efi: UEFI not found. Oct 3 07:25:30.396720 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 Oct 3 07:25:30.396720 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 07:25:30.408728 [ 0.000000] Zone ranges: Oct 3 07:25:30.408728 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Oct 3 07:25:30.408728 [ 0.000000] Normal empty Oct 3 07:25:30.420715 [ 0.000000] HighMem empty Oct 3 07:25:30.420715 [ 0.000000] Movable zone start for each node Oct 3 07:25:30.420715 [ 0.000000] Early memory node ranges Oct 3 07:25:30.432737 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Oct 3 07:25:30.432737 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Oct 3 07:25:30.444722 [ 0.000000] psci: probing for conduit method from DT. Oct 3 07:25:30.444722 [ 0.000000] psci: PSCIv1.1 detected in firmware. Oct 3 07:25:30.444722 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Oct 3 07:25:30.456714 [ 0.000000] psci: Trusted OS migration not required Oct 3 07:25:30.456714 [ 0.000000] psci: SMC Calling Convention v1.2 Oct 3 07:25:30.468724 [ 0.000000] percpu: Embedded 16 pages/cpu s35412 r8192 d21932 u65536 Oct 3 07:25:30.468724 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 Oct 3 07:25:30.480722 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 07:25:30.492726 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 07:25:30.504722 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Oct 3 07:25:30.516720 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Oct 3 07:25:30.516720 [ 0.000000] Memory: 416844K/524288K available (14336K kernel code, 2180K rwdata, 5604K rodata, 2048K init, 438K bss, 41908K reserved, 65536K cma-reserved, 0K highmem) Oct 3 07:25:30.528667 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 07:25:30.540737 [ 0.000000] trace event string verifier disabled Oct 3 07:25:30.540737 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 07:25:30.552730 [ 0.000000] rcu: RCU event tracing is enabled. Oct 3 07:25:30.552730 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Oct 3 07:25:30.564722 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Oct 3 07:25:30.564722 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 07:25:30.576730 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 07:25:30.576730 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 07:25:30.588724 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 07:25:30.588724 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Oct 3 07:25:30.600723 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 07:25:30.612711 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 07:25:30.612711 [ 0.000012] Switching to timer-based delay loop, resolution 41ns Oct 3 07:25:30.624722 [ 0.000499] Console: colour dummy device 80x30 Oct 3 07:25:30.624722 [ 0.293141] printk: console [hvc0] enabled Oct 3 07:25:30.636721 [ 0.297332] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Oct 3 07:25:30.648731 [ 0.307751] CPU: Testing write buffer coherency: ok Oct 3 07:25:30.648731 [ 0.312675] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 07:25:30.660717 [ 0.322229] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 07:25:30.660717 [ 0.328642] pid_max: default: 32768 minimum: 301 Oct 3 07:25:30.672728 [ 0.333436] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 07:25:30.672728 [ 0.340709] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 07:25:30.684727 [ 0.349121] /cpus/cpu@0 missing clock-frequency property Oct 3 07:25:30.684727 [ 0.353913] /cpus/cpu@1 missing clock-frequency property Oct 3 07:25:30.696730 [ 0.359307] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 07:25:30.696730 [ 0.365818] xen:grant_table: Grant tables using version 1 layout Oct 3 07:25:30.708848 [ 0.371158] Grant table initialized Oct 3 07:25:30.708912 [ 0.374694] xen:events: Using FIFO-based ABI Oct 3 07:25:30.720719 [ 0.379014] Xen: initializing cpu0 Oct 3 07:25:30.720719 [ 0.382560] Setting up static identity map for 0x60300000 - 0x603000ac Oct 3 07:25:30.720719 [ 0.390276] rcu: Hierarchical SRCU implementation. Oct 3 07:25:30.732726 [ 0.393930] rcu: Max phase no-delay instances is 1000. Oct 3 07:25:30.732726 [ 0.402001] EFI services will not be available. Oct 3 07:25:30.744703 [ 0.405303] smp: Bringing up secondary CPUs ... Oct 3 07:25:30.744703 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:25:30.816732 [ 0.480030] Xen: initializing cpu1 Oct 3 07:25:30.816732 [ 0.480177] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 07:25:30.828727 [ 0.480205] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 07:25:30.840724 [ 0.499090] smp: Brought up 1 node, 2 CPUs Oct 3 07:25:30.840724 [ 0.502859] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 07:25:30.840724 [ 0.509167] CPU: All CPU(s) started in SVC mode. Oct 3 07:25:30.852696 [ 0.514574] devtmpfs: initialized Oct 3 07:25:30.852696 [ 0.527147] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 07:25:30.864674 [ 0.533635] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Oct 3 07:25:30.876723 [ 0.543357] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 07:25:30.888635 [ 0.551351] pinctrl core: initialized pinctrl subsystem Oct 3 07:25:30.888635 [ 0.557932] DMI not present or invalid. Oct 3 07:25:30.900712 [ 0.561012] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 07:25:30.900712 [ 0.568225] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 07:25:30.912702 [ 0.577028] thermal_sys: Registered thermal governor 'step_wise' Oct 3 07:25:30.912702 [ 0.577156] software IO TLB: area num 2. Oct 3 07:25:30.924828 [ 0.585844] software IO TLB: only able to allocate 8 MB Oct 3 07:25:30.924895 [ 0.592954] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Oct 3 07:25:30.936871 [ 0.598154] No ATAGs? Oct 3 07:25:30.936927 [ 0.600469] hw-breakpoint: Failed to enable monitor mode on CPU 0. Oct 3 07:25:30.948822 [ 0.609031] Serial: AMBA PL011 UART driver Oct 3 07:25:30.948884 [ 0.641159] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 62 Oct 3 07:25:30.984681 [ 0.690604] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 07:25:31.032822 [ 0.725301] xen:balloon: Initialising balloon driver Oct 3 07:25:31.068715 [ 0.732877] iommu: Default domain type: Translated Oct 3 07:25:31.068715 [ 0.736377] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 07:25:31.080721 [ 0.743365] SCSI subsystem initialized Oct 3 07:25:31.080721 [ 0.746974] usbcore: registered new interface driver usbfs Oct 3 07:25:31.092718 [ 0.752122] usbcore: registered new interface driver hub Oct 3 07:25:31.092718 [ 0.757531] usbcore: registered new device driver usb Oct 3 07:25:31.092718 [ 0.764148] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 07:25:31.104716 [ 0.767784] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 07:25:31.104716 [ 0.774083] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 07:25:31.116719 [ 0.782521] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 07:25:31.128727 [ 0.791648] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 07:25:31.128727 [ 0.797172] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 07:25:31.140769 [ 0.801854] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 07:25:31.140769 [ 0.808122] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 07:25:31.152661 [ 0.813326] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 07:25:31.152661 [ 0.818102] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 07:25:31.164685 [ 0.824226] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 07:25:31.164685 [ 0.829403] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 07:25:31.164685 [ 0.834316] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 07:25:31.176670 [ 0.840348] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 07:25:31.176670 [ 0.846156] pps_core: LinuxPPS API ver. 1 registered Oct 3 07:25:31.188762 [ 0.850569] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 07:25:31.200653 [ 0.859758] PTP clock support registered Oct 3 07:25:31.200653 [ 0.878633] EDAC MC: Ver: 3.0.0 Oct 3 07:25:31.212779 [ 0.882719] vgaarb: loaded Oct 3 07:25:31.224811 [ 0.890319] clocksource: Switched to clocksource arch_sys_counter Oct 3 07:25:31.236710 [ 0.901770] NET: Registered PF_INET protocol family Oct 3 07:25:31.236773 [ 0.905408] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Oct 3 07:25:31.248727 [ 0.913333] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 07:25:31.260722 [ 0.921015] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 07:25:31.260722 [ 0.928802] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Oct 3 07:25:31.272674 [ 0.936648] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Oct 3 07:25:31.284837 [ 0.943935] TCP: Hash tables configured (established 4096 bind 4096) Oct 3 07:25:31.284907 [ 0.950280] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 07:25:31.296790 [ 0.956847] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 07:25:31.296857 [ 0.963980] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 07:25:31.308720 [ 0.970047] RPC: Registered named UNIX socket transport module. Oct 3 07:25:31.308720 [ 0.975602] RPC: Registered udp transport module. Oct 3 07:25:31.320724 [ 0.980370] RPC: Registered tcp transport module. Oct 3 07:25:31.320724 [ 0.985127] RPC: Registered tcp NFSv4.1 backchannel transport module. Oct 3 07:25:31.332727 [ 0.991656] PCI: CLS 0 bytes, default 64 Oct 3 07:25:31.332727 [ 0.996969] Initialise system trusted keyrings Oct 3 07:25:31.332727 [ 1.007000] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Oct 3 07:25:31.344715 [ 1.007046] Trying to unpack rootfs image as initramfs... Oct 3 07:25:31.356701 [ 1.019741] squashfs: version 4.0 (2009/01/31) Phillip Lougher Oct 3 07:25:31.356701 [ 1.051678] NFS: Registering the id_resolver key type Oct 3 07:25:31.392717 [ 1.055410] Key type id_resolver registered Oct 3 07:25:31.392717 [ 1.059613] Key type id_legacy registered Oct 3 07:25:31.404716 [ 1.063802] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Oct 3 07:25:31.404716 [ 1.070484] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Oct 3 07:25:31.416843 [ 1.078296] Key type asymmetric registered Oct 3 07:25:31.416903 [ 1.082129] Asymmetric key parser 'x509' registered Oct 3 07:25:31.428723 [ 1.087154] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 07:25:31.428723 [ 1.094538] io scheduler mq-deadline registered Oct 3 07:25:31.440784 [ 1.099112] io scheduler kyber registered Oct 3 07:25:31.440850 [ 1.116113] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 07:25:31.464668 [ 1.197553] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 07:25:31.536720 [ 1.203795] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 07:25:31.548687 [ 1.233389] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 07:25:31.572715 [ 1.239613] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 07:25:31.584691 [ 1.271135] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 07:25:31.608706 [ 1.277334] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 07:25:31.620697 [ 1.315335] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 07:25:31.656680 [ 1.321582] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 07:25:31.668806 [ 1.356695] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 07:25:31.704663 [ 1.392671] xen:xen_evtchn: Event-channel device installed Oct 3 07:25:31.732675 [ 1.452752] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 07:25:31.792698 [ 1.461489] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 113, base_baud = 0) is a S3C6400/10 Oct 3 07:25:31.804720 [ 1.469665] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 114, base_baud = 0) is a S3C6400/10 Oct 3 07:25:31.816723 [ 1.478648] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 115, base_baud = 0) is a S3C6400/10 Oct 3 07:25:31.828710 [ 1.488058] SuperH (H)SCI(F) driver initialized Oct 3 07:25:31.828710 [ 1.492841] STMicroelectronics ASC driver initialized Oct 3 07:25:31.828710 [ 1.498122] STM32 USART driver initialized Oct 3 07:25:31.840690 [ 1.502850] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 07:25:31.840690 [ 1.518780] brd: module loaded Oct 3 07:25:31.852670 [ 1.524672] loop: module loaded Oct 3 07:25:31.864664 [ 1.542889] Invalid max_queues (4), will use default max: 2. Oct 3 07:25:31.888654 [ 1.570795] tun: Universal TUN/TAP device driver, 1.6 Oct 3 07:25:31.912723 [ 1.574684] CAN device driver interface Oct 3 07:25:31.912723 [ 1.579790] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Oct 3 07:25:31.924664 [ 1.591585] xen_netfront: Initialising Xen virtual ethernet driver Oct 3 07:25:31.936721 [ 1.596499] pegasus: Pegasus/Pegasus II USB Ethernet driver Oct 3 07:25:31.936721 [ 1.602094] usbcore: registered new interface driver pegasus Oct 3 07:25:31.948707 [ 1.607803] usbcore: registered new interface driver asix Oct 3 07:25:31.948707 [ 1.613278] usbcore: registered new interface driver ax88179_178a Oct 3 07:25:31.964696 [ 1.619440] usbcore: registered new interface driver cdc_ether Oct 3 07:25:31.964696 [ 1.625359] usbcore: registered new interface driver smsc75xx Oct 3 07:25:31.964696 [ 1.631158] usbcore: registered new interface driver smsc95xx Oct 3 07:25:31.976692 [ 1.636973] usbcore: registered new interface driver net1080 Oct 3 07:25:31.976692 [ 1.642741] usbcore: registered new interface driver cdc_subset Oct 3 07:25:31.988709 [ 1.648671] usbcore: registered new interface driver zaurus Oct 3 07:25:31.988709 [ 1.654367] usbcore: registered new interface driver cdc_ncm Oct 3 07:25:32.000703 [ 1.663878] usbcore: registered new interface driver usb-storage Oct 3 07:25:32.000703 [ 1.709847] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 07:25:32.048672 [ 1.720030] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T07:25:33 UTC (1727940333) Oct 3 07:25:32.060715 [ 1.728675] i2c_dev: i2c /dev entries driver Oct 3 07:25:32.072649 [ 1.744603] syscon-poweroff 10040000.system-controller:syscon-poweroff: pm_power_off already claimed for psci_sys_poweroff Oct 3 07:25:32.084690 [ 1.754329] syscon-poweroff: probe of 10040000.system-controller:syscon-poweroff failed with error -16 Oct 3 07:25:32.096725 [ 1.765859] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 07:25:32.108670 [ 1.786586] Freeing initrd memory: 11780K Oct 3 07:25:32.120668 [ 1.804127] device-mapper: uevent: version 1.0.3 Oct 3 07:25:32.144672 [ 1.820415] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Oct 3 07:25:32.168719 [ 1.828379] cpu cpu0: OPP table can't be empty Oct 3 07:25:32.168719 [ 1.833396] failed to register cpuidle driver Oct 3 07:25:32.168719 [ 1.836431] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Oct 3 07:25:32.180720 [ 1.844987] sdhci: Secure Digital Host Controller Interface driver Oct 3 07:25:32.180720 [ 1.849795] sdhci: Copyright(c) Pierre Ossman Oct 3 07:25:32.192699 [ 1.858192] sdhci-pltfm: SDHCI platform and OF driver helper Oct 3 07:25:32.192699 [ 1.866262] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 07:25:32.204718 [ 1.871716] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Oct 3 07:25:32.216719 [ 1.878226] usbcore: registered new interface driver usbhid Oct 3 07:25:32.216719 [ 1.883089] usbhid: USB HID core driver Oct 3 07:25:32.228691 [ 1.893934] NET: Registered PF_INET6 protocol family Oct 3 07:25:32.228691 [ 1.898579] Segment Routing with IPv6 Oct 3 07:25:32.240847 [ 1.901341] In-situ OAM (IOAM) with IPv6 Oct 3 07:25:32.240912 [ 1.905311] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Oct 3 07:25:32.252723 [ 1.911747] NET: Registered PF_PACKET protocol family Oct 3 07:25:32.252723 [ 1.916397] can: controller area network core Oct 3 07:25:32.252723 [ 1.920880] NET: Registered PF_CAN protocol family Oct 3 07:25:32.264725 [ 1.925653] can: raw protocol Oct 3 07:25:32.264725 [ 1.928692] can: broadcast manager protocol Oct 3 07:25:32.264725 [ 1.932979] can: netlink gateway - max_hops=1 Oct 3 07:25:32.276789 [ 1.937608] Key type dns_resolver registered Oct 3 07:25:32.276859 [ 1.942388] ThumbEE CPU extension supported. Oct 3 07:25:32.276909 [ 1.946056] Registering SWP/SWPB emulation handler Oct 3 07:25:32.288698 [ 1.951431] Loading compiled-in X.509 certificates Oct 3 07:25:32.288698 [ 1.980043] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 07:25:32.324687 [ 1.986138] clk: Not disabling unused clocks Oct 3 07:25:32.324687 [ 1.993128] Freeing unused kernel image (initmem) memory: 2048K Oct 3 07:25:32.336696 [ 1.999220] Run /init as init process Oct 3 07:25:32.336696 Loading, please wait... Oct 3 07:25:32.360659 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 07:25:32.432677 [ 3.414484] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 07:25:33.760724 [ 3.414943] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 07:25:33.760724 [ 3.429626] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 07:25:33.772716 [ 3.440201] phy phy-12130000.phy.6: phy_power_on was called before phy_init Oct 3 07:25:33.784725 [ 3.445844] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 07:25:33.784725 [ 3.445856] phy phy-12130000.phy.6: phy_power_on was called before phy_init Oct 3 07:25:33.796678 [ 3.451383] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Oct 3 07:25:33.796678 [ 3.458375] exynos-ohci 12120000.usb: USB Host Controller Oct 3 07:25:33.808857 [ 3.471614] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Oct 3 07:25:33.820635 [ 3.502774] Synopsys Designware Multimedia Card Interface Driver Oct 3 07:25:33.844678 [ 3.548558] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 07:25:33.892702 [ 3.557735] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 Oct 3 07:25:33.892702 [ 3.562560] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 Oct 3 07:25:33.904718 [ 3.565293] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 07:25:33.916673 [ 3.582568] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 07:25:33.928671 [ 3.590441] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 07:25:33.928671 [ 3.615650] hub 1-0:1.0: USB hub found Oct 3 07:25:33.952694 [ 3.618158] hub 1-0:1.0: 3 ports detected Oct 3 07:25:33.952694 [ 3.626130] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 07:25:33.964706 [ 3.631882] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Oct 3 07:25:33.976661 [ 3.640778] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 07:25:33.988699 [ 3.654620] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 07:25:34.000697 [ 3.660252] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 07:25:34.000697 [ 3.690001] scsi host0: ahci-dwc Oct 3 07:25:34.024619 [ 3.690036] hub 2-0:1.0: USB hub found Oct 3 07:25:34.036719 [ 3.692311] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 126 Oct 3 07:25:34.036719 [ 3.703770] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 07:25:34.048718 [ 3.710273] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 07:25:34.048718 [ 3.715841] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 127,32 bit host data width,128 deep fifo Oct 3 07:25:34.060831 [ 3.741085] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 07:25:34.084720 [ 3.745790] hub 2-0:1.0: 3 ports detected Oct 3 07:25:34.084720 [ 3.748980] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 07:25:34.096717 [ 3.755410] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 07:25:34.096717 [ 3.760927] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 128,32 bit host data width,128 deep fifo Oct 3 07:25:34.108695 [ 3.770800] mmc_host mmc1: card is polling. Oct 3 07:25:34.108695 [ 3.795291] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Oct 3 07:25:34.132703 [ 3.799852] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 07:25:34.144708 [ 3.809133] s3c-rtc 101e0000.rtc: registered as rtc1 Oct 3 07:25:34.144708 [ 3.840059] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 07:25:34.180704 [ 3.914696] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 07:25:34.264715 [ 3.925429] mmc1: new DDR MMC card at address 0001 Oct 3 07:25:34.264715 [ 3.930370] mmcblk1: mmc1:0001 M4G1FB 3.64 GiB Oct 3 07:25:34.264715 [ 3.931165] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 07:25:34.280711 [ 3.945500] mmcblk1: p1 p2 p3 p4 Oct 3 07:25:34.280711 [ 3.951070] mmcblk1boot0: mmc1:0001 M4G1FB 1.00 MiB Oct 3 07:25:34.292720 [ 3.954164] mmc0: new high speed SDHC card at address aaaa Oct 3 07:25:34.292720 [ 3.962244] mmcblk1boot1: mmc1:0001 M4G1FB 1.00 MiB Oct 3 07:25:34.304693 [ 3.967787] mmcblk1rpmb: mmc1:0001 M4G1FB 128 KiB, chardev (238:0) Oct 3 07:25:34.304693 [ 3.973579] mmcblk0: mmc0:aaaa SU04G 3.69 GiB Oct 3 07:25:34.316659 [ 4.250389] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 07:25:34.592719 [ 4.256915] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 07:25:34.592719 [ 4.262293] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 07:25:34.604713 [ 4.271445] ata1.00: configured for UDMA/133 Oct 3 07:25:34.604713 [ 4.274877] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 07:25:34.616678 [ 4.289104] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 07:25:34.628715 [ 4.295264] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 07:25:34.640720 [ 4.301373] sd 0:0:0:0: [sda] Write Protect is off Oct 3 07:25:34.640720 [ 4.306154] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 07:25:34.652696 [ 4.315287] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 07:25:34.652696 [ 4.344962] sda: sda1 sda2 < sda5 > Oct 3 07:25:34.688666 [ 4.347722] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 07:25:34.688666 [ 4.359690] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 07:25:34.700658 [ 4.449090] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Oct 3 07:25:34.796845 [ 4.456102] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 07:25:34.796915 [ 4.460453] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 07:25:34.808726 [ 4.469434] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 07:25:34.808726 [ 4.484700] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Oct 3 07:25:34.820660 [ 4.489527] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 07:25:34.832728 [ 4.494916] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 07:25:34.832728 [ 4.502639] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 07:25:34.844701 [ 4.513695] hub 3-0:1.0: USB hub found Oct 3 07:25:34.856720 [ 4.516115] hub 3-0:1.0: 1 port detected Oct 3 07:25:34.856720 [ 4.520785] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 07:25:34.868702 [ 4.528883] hub 4-0:1.0: USB hub found Oct 3 07:25:34.868702 [ 4.532132] hub 4-0:1.0: 1 port detected Oct 3 07:25:34.868702 [ 4.656334] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 07:25:35.000685 [ 4.730219] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 07:25:35.072693 [ 4.838873] I/O error, dev mmcblk0, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 07:25:35.180788 [ 4.947015] I/O error, dev mmcblk0, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 07:25:35.292792 [ 5.055116] I/O error, dev mmcblk0, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 07:25:35.400648 [ 5.163193] I/O error, dev mmcblk0, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 07:25:35.512626 [ 5.271263] I/O error, dev mmcblk0, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 07:25:35.620649 [ 5.379324] I/O error, dev mmcblk0, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 07:25:35.728633 [ 5.487393] I/O error, dev mmcblk0, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 07:25:35.836654 [ 5.595476] I/O error, dev mmcblk0, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 07:25:35.944651 [ 6.004207] I/O error, dev mmcblk0, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 07:25:36.344740 [ 6.111938] I/O error, dev mmcblk0, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 07:25:36.452815 [ 6.720311] Buffer I/O error on dev mmcblk0, logical block 968056, async page read Oct 3 07:25:37.057687 [ 7.000323] random: crng init done Oct 3 07:25:37.333618 Begin: Loading essential drivers ... done. Oct 3 07:25:37.885681 Begin: Running /scripts/init-premount ... done. Oct 3 07:25:40.897759 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 07:25:40.909818 Begin: Running /scripts/local-premount ... done. Oct 3 07:25:40.921675 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 07:25:41.005674 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 07:25:41.101734 /dev/mapper/arndale--westfield--vg-root: clean, 46037/1220608 files, 606533/4882432 blocks Oct 3 07:25:41.305752 done. Oct 3 07:25:41.317705 [ 10.983626] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 07:25:41.329692 [ 11.251808] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 07:25:41.593739 done. Oct 3 07:25:41.593791 Begin: Running /scripts/local-bottom ... done. Oct 3 07:25:41.689740 Begin: Running /scripts/init-bottom ... done. Oct 3 07:25:41.737672 INIT: version 3.06 booting Oct 3 07:25:42.221721 INIT: No inittab.d directory found Oct 3 07:25:42.293707 Using makefile-style concurrent boot in runlevel S. Oct 3 07:25:42.617678 Starting hotplug events dispatcher: systemd-udevd. Oct 3 07:25:44.309670 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 07:25:44.789687 Synthesizing the initial hotplug events (devices)...[ 14.738924] wm8994 3-001a: Device is not a WM8994, ID is 0 Oct 3 07:25:45.077748 [ 14.746398] wm8994: probe of 3-001a failed with error -22 Oct 3 07:25:45.089702 [ 15.418230] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Oct 3 07:25:45.761832 done. Oct 3 07:25:45.761884 [ 15.428471] mc: Linux media interface: v0.10 Oct 3 07:25:45.761932 Waiting for /dev to be fully populated...[ 15.441478] s5p-secss 10830000.sss: s5p-sss driver registered Oct 3 07:25:45.785682 [ 15.515971] videodev: Linux video capture interface: v2.00 Oct 3 07:25:45.857701 [ 15.672382] s5p-mfc 11000000.codec: Adding to iommu group 0 Oct 3 07:25:46.013751 [ 15.681743] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Oct 3 07:25:46.025734 [ 15.720501] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 07:25:46.061766 [ 15.728693] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 07:25:46.073765 [ 15.736911] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 07:25:46.085707 [ 15.770089] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 07:25:46.109757 [ 15.799717] s5p-mfc 11000000.codec: decoder registered as /dev/video0 Oct 3 07:25:46.145720 [ 15.810713] s5p-mfc 11000000.codec: encoder registered as /dev/video1 Oct 3 07:25:46.157664 [ 15.844890] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 07:25:46.193676 [ 15.926069] exynos-gsc 13e00000.gsc: Adding to iommu group 1 Oct 3 07:25:46.265719 [ 15.950873] exynos-gsc 13e10000.gsc: Adding to iommu group 2 Oct 3 07:25:46.289768 [ 15.953519] blk_print_req_error: 6 callbacks suppressed Oct 3 07:25:46.301754 [ 15.953529] I/O error, dev mmcblk0, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 07:25:46.301853 [ 15.962027] exynos-gsc 13e20000.gsc: Adding to iommu group 3 Oct 3 07:25:46.313704 [ 15.982504] exynos-gsc 13e30000.gsc: Adding to iommu group 4 Oct 3 07:25:46.325698 [ 16.060375] usb3503 usb-hub: switched to HUB mode Oct 3 07:25:46.397753 [ 16.063761] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 07:25:46.409722 [ 16.070248] I/O error, dev mmcblk0, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 07:25:46.409796 [ 16.179192] I/O error, dev mmcblk0, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 07:25:46.517746 [ 16.287404] I/O error, dev mmcblk0, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 07:25:46.625874 [ 16.328074] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Oct 3 07:25:46.673702 [ 16.400627] I/O error, dev mmcblk0, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 07:25:46.745753 [ 16.410518] usb 1-3: new high-speed USB device number 2 using exynos-ehci Oct 3 07:25:46.757667 [ 16.515384] I/O error, dev mmcblk0, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 07:25:46.865676 [ 16.611617] hub 1-3:1.0: USB hub found Oct 3 07:25:46.949726 [ 16.614528] hub 1-3:1.0: 3 ports detected Oct 3 07:25:46.949785 [ 16.623949] I/O error, dev mmcblk0, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 07:25:46.973651 [ 16.732093] I/O error, dev mmcblk0, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 07:25:47.081584 [ 16.840932] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 07:25:47.189735 [ 16.848602] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 07:25:47.189807 [ 16.857379] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 07:25:47.201755 [ 16.870727] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 07:25:47.213783 [ 16.878427] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 07:25:47.225764 [ 16.887116] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 07:25:47.237744 [ 16.990415] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 07:25:47.333729 [ 17.141271] I/O error, dev mmcblk0, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 07:25:47.489749 [ 17.150562] hub 1-3.2:1.0: USB hub found Oct 3 07:25:47.489823 [ 17.153528] hub 1-3.2:1.0: 4 ports detected Oct 3 07:25:47.489872 [ 17.241815] usbcore: registered new device driver onboard-usb-hub Oct 3 07:25:47.585725 [ 17.249037] I/O error, dev mmcblk0, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 07:25:47.597669 [ 17.371228] hub 1-3.2:1.0: USB hub found Oct 3 07:25:47.705704 [ 17.374191] hub 1-3.2:1.0: 4 ports detected Oct 3 07:25:47.717707 [ 17.385192] hub 1-3.2:1.0: USB hub found Oct 3 07:25:47.729685 [ 17.388169] hub 1-3.2:1.0: 4 ports detected Oct 3 07:25:47.729746 [ 17.710362] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 07:25:48.053677 [ 17.857505] Buffer I/O error on dev mmcblk0, logical block 968056, async page read Oct 3 07:25:48.197736 [ 17.868771] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 07:25:48.209768 done. Oct 3 07:25:48.221671 [ 18.233839] EXT4-fs (dm-0): re-mounted. Quota mode: disabled. Oct 3 07:25:48.569725 [ 18.561993] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 07:25:48.905761 [ 18.576517] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Oct 3 07:25:48.917781 [ 18.586467] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 0e:2e:21:91:bc:83 Oct 3 07:25:48.929754 Checking file systems.../dev/sda1: clean, 2105/61056 files, 43350/243968 blocks Oct 3 07:25:50.285712 done. Oct 3 07:25:50.333672 Cleaning up temporary files... /tmp Oct 3 07:25:50.525716 . Oct 3 07:25:50.525769 [ 20.380516] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 07:25:50.717800 [ 20.429364] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 07:25:50.777669 [ 20.524676] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k Oct 3 07:25:50.873687 Mounting local filesystems...done. Oct 3 07:25:51.137730 Activating swapfile swap, if any...done. Oct 3 07:25:51.159517 Cleaning up temporary files.... Oct 3 07:25:51.173678 Starting Setting kernel variables: sysctl. Oct 3 07:25:51.341691 [ 22.374208] xenbr0: port 1(eth0) entered blocking state Oct 3 07:25:52.713748 [ 22.378069] xenbr0: port 1(eth0) entered disabled state Oct 3 07:25:52.713812 [ 22.383552] device eth0 entered promiscuous mode Oct 3 07:25:52.725732 [ 22.393138] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 07:25:52.737723 Configuring network interfaces...RTNETLINK answers: Operation not supported Oct 3 07:25:54.573724 Oct 3 07:25:54.573777 Waiting for xenbr0 to get ready (MAXWAIT is 2 seconds). Oct 3 07:25:54.585709 [ 24.578027] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 07:25:54.921759 [ 24.580417] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 3 07:25:54.921824 [ 24.590432] xenbr0: port 1(eth0) entered blocking state Oct 3 07:25:54.933757 [ 24.595600] xenbr0: port 1(eth0) entered forwarding state Oct 3 07:25:54.933820 [ 24.601218] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready Oct 3 07:25:54.945696 done. Oct 3 07:25:55.125677 Cleaning up temporary files.... Oct 3 07:25:55.197699 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Oct 3 07:25:55.257700 Starting nftables: none Oct 3 07:25:55.317689 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Oct 3 07:25:55.425713 failed! Oct 3 07:25:55.425767 startpar: service(s) returned failure: nftables ... failed! Oct 3 07:25:55.425816 INIT: Entering runlevel: 2 Oct 3 07:25:55.449696 Using makefile-style concurrent boot in runlevel 2. Oct 3 07:25:55.461675 Starting Apache httpd web server: apache2AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.149.64.45. Set the 'ServerName' directive globally to suppress this message Oct 3 07:25:56.289763 . Oct 3 07:25:57.373703 Starting SMP IRQ Balancer: irqbalance. Oct 3 07:25:57.913726 Starting NTP server: ntpd2024-10-03T07:25:58 ntpd[1148]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 07:25:57.925773 2024-10-03T07:25:58 ntpd[1148]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 07:25:57.937660 . Oct 3 07:25:57.937660 Starting system message bus: dbus. Oct 3 07:25:58.273664 Starting OpenBSD Secure Shell server: sshd. Oct 3 07:25:59.053697 Starting /usr/local/sbin/oxenstored... Oct 3 07:26:01.453721 Setting domain 0 name, domid and JSON config... Oct 3 07:26:01.453784 Done setting up Dom0 Oct 3 07:26:01.453828 Starting xenconsoled... Oct 3 07:26:01.453870 Starting QEMU as disk backend for dom0 Oct 3 07:26:01.465698 Oct 3 07:26:02.557750 Debian GNU/Linux 12 arndale-westfield hvc0 Oct 3 07:26:02.569724 Oct 3 07:26:02.569778 arndale-westfield login: [ 115.109883] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 07:27:25.453618 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 07:27:41.589712 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 07:34:22.948829 [ 628.962612] EXT4-fs (dm-3): unmounting filesystem. Oct 3 07:35:59.293667 [ 635.834981] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 07:36:06.169752 [ 640.948341] EXT4-fs (dm-3): unmounting filesystem. Oct 3 07:36:11.273780 [ 656.287092] xenbr0: port 2(vif1.0) entered blocking state Oct 3 07:36:26.616871 [ 656.291211] xenbr0: port 2(vif1.0) entered disabled state Oct 3 07:36:26.628890 [ 656.296796] device vif1.0 entered promiscuous mode Oct 3 07:36:26.628890 (XEN) d1v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 07:36:27.753746 (XEN) d1v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:36:27.765801 (XEN) d1v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:36:27.801734 (XEN) d1v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:36:27.837692 (XEN) d1v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:36:27.861727 [ 658.050802] xen-blkback: backend/vbd/1/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 07:36:28.389690 [ 658.128438] xen-blkback: backend/vbd/1/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 07:36:28.461844 (XEN) common/grant_table.c:1909:d1v2 Expanding d1 grant table from 1 to 2 frames Oct 3 07:36:28.593807 (XEN) common/grant_table.c:1909:d1v2 Expanding d1 grant table from 2 to 3 frames Oct 3 07:36:28.605735 [ 658.318697] vif vif-1-0 vif1.0: Guest Rx ready Oct 3 07:36:28.653661 [ 658.321962] IPv6: ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready Oct 3 07:36:28.653697 [ 658.328404] xenbr0: port 2(vif1.0) entered blocking state Oct 3 07:36:28.665650 [ 658.333855] xenbr0: port 2(vi(XEN) gnttab_mark_dirty not implemented yet Oct 3 07:36:28.665686 f1.0) entered forwarding state Oct 3 07:36:28.665711 [ 661.340359] dwmmc_exynos 12200000.mmc: Unexpected interrupt latency Oct 3 07:36:31.680842 (XEN) common/grant_table.c:1909:d1v2 Expanding d1 grant table from 3 to 4 frames Oct 3 07:36:53.389774 [ 714.285758] xenbr0: port 2(vif1.0) entered disabled state Oct 3 07:37:24.613819 [ 714.640787] xenbr0: port 2(vif1.0) entered disabled state Oct 3 07:37:24.973777 [ 714.645615] device vif1.0 left promiscuous mode Oct 3 07:37:24.973826 [ 714.649441] xenbr0: port 2(vif1.0) entered disabled state Oct 3 07:37:24.985640 [ 742.277446] xenbr0: port 2(vif2.0) entered blocking state Oct 3 07:37:52.605684 [ 742.281518] xenbr0: port 2(vif2.0) entered disabled state Oct 3 07:37:52.617665 [ 742.287107] device vif2.0 entered promiscuous mode Oct 3 07:37:52.617694 (XEN) d2v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 07:37:53.685635 (XEN) d2v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:37:53.697639 (XEN) d2v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:37:53.733637 (XEN) d2v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:37:53.769639 (XEN) d2v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:37:53.793653 [ 744.133890] xen-blkback: backend/vbd/2/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 07:37:54.465666 [ 744.312328] xen-blkback: backend/vbd/2/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 07:37:54.645669 (XEN) common/grant_table.c:1909:d2v3 Expanding d2 grant table from 1 to 2 frames Oct 3 07:37:54.693679 (XEN) common/grant_table.c:1909:d2v3 Expanding d2 grant table from 2 to 3 frames Oct 3 07:37:54.705624 [ 744.413561] vif vif-2-0 vif2.0: Guest Rx ready Oct 3 07:37:54.741642 [ 744.417219] IPv6: ADDRCONF(NETDEV_CHANGE): vif2.0: link becomes ready Oct 3 07:37:54.753653 [ 744.425509] xenbr0: port 2(vif2.0) entered blocking state Oct 3 07:37:54.765629 [ 744.440870] xenbr0: port 2(vif2.0) entered forwarding state Oct 3 07:37:54.777637 [ 765.010454] dwmmc_exynos 12200000.mmc: Unexpected interrupt latency Oct 3 07:38:15.349569 (XEN) common/grant_table.c:1909:d2v0 Expanding d2 grant table from 3 to 4 frames Oct 3 07:38:19.109992 [ 795.540673] xenbr0: port 2(vif2.0) entered disabled state Oct 3 07:38:45.869874 [ 795.820855] xenbr0: port 2(vif2.0) entered disabled state Oct 3 07:38:46.157739 [ 795.825715] device vif2.0 left promiscuous mode Oct 3 07:38:46.157805 [ 795.829506] xenbr0: port 2(vif2.0) entered disabled state Oct 3 07:38:46.169674 [ 822.728228] xenbr0: port 2(vif3.0) entered blocking state Oct 3 07:39:13.053853 [ 822.732306] xenbr0: port 2(vif3.0) entered disabled state Oct 3 07:39:13.065806 [ 822.737910] device vif3.0 entered promiscuous mode Oct 3 07:39:13.065868 (XEN) d3v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 07:39:14.161016 (XEN) d3v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:39:14.172879 (XEN) d3v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:39:14.208875 (XEN) d3v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:39:14.244863 (XEN) d3v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:39:14.269011 [ 824.546337] xen-blkback: backend/vbd/3/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 07:39:14.880833 [ 824.587632] xen-blkback: backend/vbd/3/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 07:39:14.928828 (XEN) common/grant_table.c:1909:d3v1 Expanding d3 grant table from 1 to 2 frames Oct 3 07:39:14.976888 (XEN) common/grant_table.c:1909:d3v1 Expanding d3 grant table from 2 to 3 frames Oct 3 07:39:14.988845 [ 824.857390] vif vif-3-0 vif3.0: Guest Rx ready Oct 3 07:39:15.192904 [ 824.860544] IPv6: ADDRCONF(NETDEV_CHANGE): vif3.0: link becomes ready Oct 3 07:39:15.192904 [ 824.867210] xenbr0: port 2(vif3.0) entered blocking state Oct 3 07:39:15.204874 [ 824.873040] xenbr0: port 2(vif3.0) entered forwarding state Oct 3 07:39:15.204874 (XEN) common/grant_table.c:1909:d3v2 Expanding d3 grant table from 3 to 4 frames Oct 3 07:39:35.009756 [ 875.687187] xenbr0: port 2(vif3.0) entered disabled state Oct 3 07:40:06.025593 [ 875.940856] xenbr0: port 2(vif3.0) entered disabled state Oct 3 07:40:06.277671 [ 875.945590] device vif3.0 left promiscuous mode Oct 3 07:40:06.277671 [ 875.949507] xenbr0: port 2(vif3.0) entered disabled state Oct 3 07:40:06.277671 [ 902.857504] xenbr0: port 2(vif4.0) entered blocking state Oct 3 07:40:33.189789 [ 902.861595] xenbr0: port 2(vif4.0) entered disabled state Oct 3 07:40:33.189868 [ 902.867170] device vif4.0 entered promiscuous mode Oct 3 07:40:33.201661 (XEN) d4v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 07:40:34.317729 (XEN) d4v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:40:34.329717 (XEN) d4v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:40:34.365740 (XEN) d4v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:40:34.401680 (XEN) d4v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:40:34.425687 [ 904.714003] xen-blkback: backend/vbd/4/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 07:40:35.049720 [ 904.860230] xen-blkback: backend/vbd/4/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 07:40:35.193739 (XEN) common/grant_table.c:1909:d4v1 Expanding d4 grant table from 1 to 2 frames Oct 3 07:40:35.253763 (XEN) common/grant_table.c:1909:d4v1 Expanding d4 grant table from 2 to 3 frames Oct 3 07:40:35.265706 [ 905.050885] vif vif-4-0 vif4.0: Guest Rx ready Oct 3 07:40:35.385748 [ 905.053983] IPv6: ADDRCONF(NETDEV_CHANGE): vif4.0: link becomes ready Oct 3 07:40:35.385814 [ 905.060746] xenbr0: port 2(vif4.0) entered blocking state Oct 3 07:40:35.397760 [ 905.065935] xenbr0: port 2(vif4.0) entered forwarding state Oct 3 07:40:35.397824 [ 908.150360] dwmmc_exynos 12200000.mmc: Unexpected interrupt latency Oct 3 07:40:38.485728 (XEN) common/grant_table.c:1909:d4v2 Expanding d4 grant table from 3 to 4 frames Oct 3 07:40:55.313174 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 07:41:04.205684 [ 960.387299] xenbr0: port 2(vif4.0) entered disabled state Oct 3 07:41:30.720844 [ 960.640816] xenbr0: port 2(vif4.0) entered disabled state Oct 3 07:41:30.976844 [ 960.653565] device vif4.0 left promiscuous mode Oct 3 07:41:30.988859 [ 960.656744] xenbr0: port 2(vif4.0) entered disabled state Oct 3 07:41:30.988859 [ 987.561501] xenbr0: port 2(vif5.0) entered blocking state Oct 3 07:41:57.893755 [ 987.565534] xenbr0: port 2(vif5.0) entered disabled state Oct 3 07:41:57.893810 [ 987.571212] device vif5.0 entered promiscuous mode Oct 3 07:41:57.905635 (XEN) d5v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 07:41:58.973708 (XEN) d5v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:41:58.985613 (XEN) d5v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:41:59.021674 (XEN) d5v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:41:59.057610 (XEN) d5v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:41:59.081661 [ 989.511702] xen-blkback: backend/vbd/5/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 07:41:59.849679 [ 989.552330] xen-blkback: backend/vbd/5/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 07:41:59.885637 (XEN) common/grant_table.c:1909:d5v1 Expanding d5 grant table from 1 to 2 frames Oct 3 07:41:59.909605 (XEN) common/grant_table.c:1909:d5v1 Expanding d5 grant table from 2 to 3 frames Oct 3 07:41:59.921574 [ 989.626632] vif vif-5-0 vif5.0: Guest Rx ready Oct 3 07:41:59.957614 [ 989.629799] IPv6: ADDRCONF(NETDEV_CHANGE): vif5.0: link becomes ready Oct 3 07:41:59.957646 [ 989.636758] xenbr0: port 2(vif5.0) entered blocking state Oct 3 07:41:59.969693 [ 989.641746] xenbr0: port 2(vif5.0) entered forwarding state Oct 3 07:41:59.969723 [ 992.789706] dwmmc_exynos 12200000.mmc: Unexpected interrupt latency Oct 3 07:42:03.120847 (XEN) common/grant_table.c:1909:d5v2 Expanding d5 grant table from 3 to 4 frames Oct 3 07:42:20.573640 [ 1044.474789] xenbr0: port 2(vif5.0) entered disabled state Oct 3 07:42:54.809778 [ 1044.781888] xenbr0: port 2(vif5.0) entered disabled state Oct 3 07:42:55.109810 [ 1044.786437] device vif5.0 left promiscuous mode Oct 3 07:42:55.121792 [ 1044.790609] xenbr0: port 2(vif5.0) entered disabled state Oct 3 07:42:55.121855 [ 1071.686469] xenbr0: port 2(vif6.0) entered blocking state Oct 3 07:43:22.013861 [ 1071.690554] xenbr0: port 2(vif6.0) entered disabled state Oct 3 07:43:22.013917 [ 1071.696133] device vif6.0 entered promiscuous mode Oct 3 07:43:22.025735 (XEN) d6v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 07:43:23.112720 (XEN) d6v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:43:23.124651 (XEN) d6v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:43:23.157687 (XEN) d6v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:43:23.181704 (XEN) d6v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:43:23.217756 [ 1073.600438] xen-blkback: backend/vbd/6/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 07:43:23.925741 [ 1073.773590] xen-blkback: backend/vbd/6/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 07:43:24.105739 (XEN) common/grant_table.c:1909:d6v0 Expanding d6 grant table from 1 to 2 frames Oct 3 07:43:24.117677 (XEN) common/grant_table.c:1909:d6v0 Expanding d6 grant table from 2 to 3 frames Oct 3 07:43:24.117716 [ 1073.941446] vif vif-6-0 vif6.0: Guest Rx ready Oct 3 07:43:24.273740 [ 1073.944543] IPv6: ADDRCONF(NETDEV_CHANGE): vif6.0: link becomes ready Oct 3 07:43:24.273797 [ 1073.951700] xenbr0: port 2(vif6.0) entered blocking state Oct 3 07:43:24.285667 [ 1073.956497] xenbr0: port 2(vif6.0) entered forwarding state Oct 3 07:43:24.285708 (XEN) common/grant_table.c:1909:d6v0 Expanding d6 grant table from 3 to 4 frames Oct 3 07:43:44.845790 [ 1125.273831] xenbr0: port 2(vif6.0) entered disabled state Oct 3 07:44:15.597688 [ 1125.542416] xenbr0: port 2(vif6.0) entered disabled state Oct 3 07:44:15.873691 [ 1125.547557] device vif6.0 left promiscuous mode Oct 3 07:44:15.873776 [ 1125.551104] xenbr0: port 2(vif6.0) entered disabled state Oct 3 07:44:15.873805 [ 1152.404262] xenbr0: port 2(vif7.0) entered blocking state Oct 3 07:44:42.737752 [ 1152.408297] xenbr0: port 2(vif7.0) entered disabled state Oct 3 07:44:42.737835 [ 1152.413974] device vif7.0 entered promiscuous mode Oct 3 07:44:42.749623 (XEN) d7v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 07:44:43.808833 (XEN) d7v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:44:43.832775 (XEN) d7v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:44:43.868713 (XEN) d7v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:44:43.892734 (XEN) d7v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:44:43.928711 [ 1154.203845] xen-blkback: backend/vbd/7/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 07:44:44.532758 [ 1154.241107] xen-blkback: backend/vbd/7/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 07:44:44.568767 (XEN) common/grant_table.c:1909:d7v2 Expanding d7 grant table from 1 to 2 frames Oct 3 07:44:44.604702 (XEN) common/grant_table.c:1909:d7v2 Expanding d7 grant table from 2 to 3 frames Oct 3 07:44:44.604702 [ 1154.383939] vif vif-7-0 vif7.0: Guest Rx ready Oct 3 07:44:44.713128 [ 1154.387079] IPv6: ADDRCONF(NETDEV_CHANGE): vif7.0: link becomes ready Oct 3 07:44:44.724908 [ 1154.393708] xenbr0: port 2(vif7.0) entered blocking state Oct 3 07:44:44.724908 [ 1154.398996] xenbr0: port 2(vif7.0) entered forwarding state Oct 3 07:44:44.724908 [ 1157.470360] dwmmc_exynos 12200000.mmc: Unexpected interrupt latency Oct 3 07:44:47.796694 (XEN) common/grant_table.c:1909:d7v1 Expanding d7 grant table from 3 to 4 frames Oct 3 07:45:06.149080 [ 1208.780343] dwmmc_exynos 12200000.mmc: Unexpected interrupt latency Oct 3 07:45:39.109762 [ 1209.901648] xenbr0: port 2(vif7.0) entered disabled state Oct 3 07:45:40.225767 [ 1210.170716] xenbr0: port 2(vif7.0) entered disabled state Oct 3 07:45:40.501794 [ 1210.176267] device vif7.0 left promiscuous mode Oct 3 07:45:40.501858 [ 1210.179544] xenbr0: port 2(vif7.0) entered disabled state Oct 3 07:45:40.501908 [ 1237.047444] xenbr0: port 2(vif8.0) entered blocking state Oct 3 07:46:07.373057 [ 1237.051536] xenbr0: port 2(vif8.0) entered disabled state Oct 3 07:46:07.384812 [ 1237.057126] device vif8.0 entered promiscuous mode Oct 3 07:46:07.384899 (XEN) d8v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 07:46:08.477814 (XEN) d8v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:46:08.489774 (XEN) d8v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:46:08.525828 (XEN) d8v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:46:08.549633 (XEN) d8v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:46:08.573894 [ 1239.054716] xen-blkback: backend/vbd/8/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 07:46:09.392765 [ 1239.097092] xen-blkback: backend/vbd/8/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 07:46:09.428810 (XEN) common/grant_table.c:1909:d8v3 Expanding d8 grant table from 1 to 2 frames Oct 3 07:46:09.521706 (XEN) common/grant_table.c:1909:d8v3 Expanding d8 grant table from 2 to 3 frames Oct 3 07:46:09.521743 [ 1239.242402] vif vif-8-0 vif8.0: Guest Rx ready Oct 3 07:46:09.569711 [ 1239.245497] IPv6: ADDRCONF(NETDEV_CHANGE): vif8.0: link becomes ready Oct 3 07:46:09.569747 [ 1239.252132] xenbr0: port 2(vif8.0) entered blocking state Oct 3 07:46:09.581695 [ 1239.257508] xenbr0: port 2(vif8.0) entered forwarding state Oct 3 07:46:09.581729 (XEN) common/grant_table.c:1909:d8v1 Expanding d8 grant table from 3 to 4 frames Oct 3 07:46:29.880833 [ 1294.057553] xenbr0: port 2(vif8.0) entered disabled state Oct 3 07:47:04.381689 [ 1294.350772] xenbr0: port 2(vif8.0) entered disabled state Oct 3 07:47:04.681673 [ 1294.355173] device vif8.0 left promiscuous mode Oct 3 07:47:04.681708 [ 1294.359421] xenbr0: port 2(vif8.0) entered disabled state Oct 3 07:47:04.681753 [ 1321.507113] xenbr0: port 2(vif9.0) entered blocking state Oct 3 07:47:31.833652 [ 1321.511195] xenbr0: port 2(vif9.0) entered disabled state Oct 3 07:47:31.833695 [ 1321.516782] device vif9.0 entered promiscuous mode Oct 3 07:47:31.845625 (XEN) d9v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 07:47:32.901696 (XEN) d9v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:47:32.917586 (XEN) d9v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:47:32.949648 (XEN) d9v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:47:32.985672 (XEN) d9v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:47:33.009650 [ 1323.274495] xen-blkback: backend/vbd/9/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 07:47:33.597645 (XEN) common/grant_table.c:1909:d9v3 Expanding d9 grant table from 1 to 2 frames Oct 3 07:47:33.641765 (XEN) common/grant_table.c:1909:d9v3 Expanding d9 grant table from 2 to 3 frames Oct 3 07:47:33.653774 [ 1323.335473] xen-blkback: backend/vbd/9/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 07:47:33.669725 [ 1323.443347] vif vif-9-0 vif9.0: Guest Rx ready Oct 3 07:47:33.769750 [ 1323.446450] IPv6: ADDRCONF(NETDEV_CHANGE): vif9.0: link becomes ready Oct 3 07:47:33.769816 [ 1323.470857] xenbr0: port 2(vif9.0) entered blocking state Oct 3 07:47:33.793763 [ 1323.474912] xenbr0: port 2(vif9.0) entered forwarding state Oct 3 07:47:33.805683 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 07:47:45.397758 [ 1344.320384] dwmmc_exynos 12200000.mmc: Unexpected interrupt latency Oct 3 07:47:54.653650 (XEN) common/grant_table.c:1909:d9v3 Expanding d9 grant table from 3 to 4 frames Oct 3 07:47:55.421700 [ 1378.729822] xenbr0: port 2(vif9.0) entered disabled state Oct 3 07:48:29.053811 [ 1378.961092] xenbr0: port 2(vif9.0) entered disabled state Oct 3 07:48:29.293756 [ 1378.965694] device vif9.0 left promiscuous mode Oct 3 07:48:29.293819 [ 1378.969732] xenbr0: port 2(vif9.0) entered disabled state Oct 3 07:48:29.293870 [ 1406.049311] xenbr0: port 2(vif10.0) entered blocking state Oct 3 07:48:56.377757 [ 1406.053478] xenbr0: port 2(vif10.0) entered disabled state Oct 3 07:48:56.377829 [ 1406.059155] device vif10.0 entered promiscuous mode Oct 3 07:48:56.389684 (XEN) d10v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 07:48:57.437613 (XEN) d10v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:48:57.449593 (XEN) d10v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:48:57.485610 (XEN) d10v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:48:57.521570 (XEN) d10v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:48:57.545713 [ 1407.724693] xen-blkback: backend/vbd/10/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 07:48:58.049739 [ 1407.896085] xen-blkback: backend/vbd/10/51714: using 2 queues, protocol 1 (arm-abi) persisten(XEN) common/grant_table.c:1909:d10v0 Expanding d10 grant table from 1 to 2 frames Oct 3 07:48:58.229771 t grants Oct 3 07:48:58.229824 (XEN) common/grant_table.c:1909:d10v0 Expanding d10 grant table from 2 to 3 frames Oct 3 07:48:58.241726 [ 1408.021916] vif vif-10-0 vif10.0: Guest Rx ready Oct 3 07:48:58.349758 [ 1408.025568] IPv6: ADDRCONF(NETDEV_CHANGE): vif10.0: link becomes ready Oct 3 07:48:58.349824 [ 1408.031947] xenbr0: port 2(vif10.0) entered blocking state Oct 3 07:48:58.361761 [ 1408.037350] xenbr0: port 2(vif10.0) entered forwarding state Oct 3 07:48:58.361824 (XEN) common/grant_table.c:1909:d10v0 Expanding d10 grant table from 3 to 4 frames Oct 3 07:49:19.289725 [ 1459.153174] xenbr0: port 2(vif10.0) entered disabled state Oct 3 07:49:49.481714 [ 1459.472525] xenbr0: port 2(vif10.0) entered disabled state Oct 3 07:49:49.793742 [ 1459.484489] device vif10.0 left promiscuous mode Oct 3 07:49:49.805758 [ 1459.487768] xenbr0: port 2(vif10.0) entered disabled state Oct 3 07:49:49.817661 [ 1486.353797] xenbr0: port 2(vif11.0) entered blocking state Oct 3 07:50:16.677948 [ 1486.357934] xenbr0: port 2(vif11.0) entered disabled state Oct 3 07:50:16.695197 [ 1486.363684] device vif11.0 entered promiscuous mode Oct 3 07:50:16.695333 (XEN) d11v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 07:50:17.757837 (XEN) d11v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:50:17.769844 (XEN) d11v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:50:17.805837 (XEN) d11v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:50:17.841817 (XEN) d11v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:50:17.865822 [ 1488.345434] xen-blkback: backend/vbd/11/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 07:50:18.669860 [ 1488.394800] xen-blkback: backend/vbd/11/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 07:50:18.717881 (XEN) common/grant_table.c:1909:d11v2 Expanding d11 grant table from 1 to 2 frames Oct 3 07:50:18.933854 (XEN) common/grant_table.c:1909:d11v2 Expanding d11 grant table from 2 to 3 frames Oct 3 07:50:18.945856 [ 1488.667738] vif vif-11-0 vif11.0: Guest Rx ready Oct 3 07:50:18.993876 [ 1488.671164] IPv6: ADDRCONF(NETDEV_CHANGE): vif11.0: link becomes ready Oct 3 07:50:18.993942 [ 1488.677776] xenbr0: port 2(vif11.0) entered blocking state Oct 3 07:50:19.005812 [ 1488.683205] xenbr0: port 2(vif11.0) entered forwarding state Oct 3 07:50:19.005877 (XEN) common/grant_table.c:1909:d11v2 Expanding d11 grant table from 3 to 4 frames Oct 3 07:50:38.821691 [ 1539.628309] xenbr0: port 2(vif11.0) entered disabled state Oct 3 07:51:09.953122 [ 1539.872161] xenbr0: port 2(vif11.0) entered disabled state Oct 3 07:51:10.190425 [ 1539.876667] device vif11.0 left promiscuous mode Oct 3 07:51:10.201797 [ 1539.881016] xenbr0: port 2(vif11.0) entered disabled state Oct 3 07:51:10.201859 [ 1567.316652] xenbr0: port 2(vif12.0) entered blocking state Oct 3 07:51:37.641841 [ 1567.320836] xenbr0: port 2(vif12.0) entered disabled state Oct 3 07:51:37.653713 [ 1567.326519] device vif12.0 entered promiscuous mode Oct 3 07:51:37.653778 (XEN) d12v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 07:51:38.733708 (XEN) d12v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:51:38.745706 (XEN) d12v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:51:38.793690 (XEN) d12v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:51:38.817727 (XEN) d12v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 07:51:38.853699 [ 1569.274591] xen-blkback: backend/vbd/12/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 07:51:39.609588 [ 1569.409128] xen-blkback: backend/vbd/12/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 07:51:39.741618 (XEN) common/grant_table.c:1909:d12v0 Expanding d12 grant table from 1 to 2 frames Oct 3 07:51:39.753644 (XEN) common/grant_table.c:1909:d12v0 Expanding d12 grant table from 2 to 3 frames Oct 3 07:51:39.753687 [ 1569.540252] vif vif-12-0 vif12.0: Guest Rx ready Oct 3 07:51:39.861626 [ 1569.544018] IPv6: ADDRCONF(NETDEV_CHANGE): vif12.0: link becomes ready Oct 3 07:51:39.873660 [ 1569.551636] xenbr0: port 2(vif12.0) entered blocking state Oct 3 07:51:39.873693 [ 1569.555746] xenbr0: port 2(vif12.0) entered forwarding state Oct 3 07:51:39.885608 (XEN) common/grant_table.c:1909:d12v2 Expanding d12 grant table from 3 to 4 frames Oct 3 07:52:00.445795 [ 1592.530513] dwmmc_exynos 12200000.mmc: Unexpected interrupt latency Oct 3 07:52:02.857675 [ 1616.948169] xenbr0: port 2(vif12.0) entered disabled state Oct 3 07:52:27.269770 [ 1617.080901] xenbr0: port 2(vif12.0) entered disabled state Oct 3 07:52:27.401727 [ 1617.085627] device vif12.0 left promiscuous mode Oct 3 07:52:27.401788 [ 1617.089730] xenbr0: port 2(vif12.0) entered disabled state Oct 3 07:52:27.413728 Oct 3 07:52:46.755114 (XEN) *** Serial input to Xen (type 'CTRL-x' three times to switch input) Oct 3 07:52:46.777701 Oct 3 07:52:46.779079 Oct 3 07:52:47.726836 (XEN) '0' pressed -> dumping Dom0's registers Oct 3 07:52:47.749846 (XEN) *** Dumping Dom0 vcpu#0 state: *** Oct 3 07:52:47.749903 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Oct 3 07:52:47.751122 Not tainted ]---- Oct 3 07:52:47.761635 (XEN) CPU: 0 Oct 3 07:52:47.761663 (XEN) PC: c031ce28 Oct 3 07:52:47.761686 (XEN) CPSR: 60030093 MODE:32-bit Guest SVC Oct 3 07:52:47.761711 (XEN) R0: 00000005 R1: 00000000 R2: 00570771 R3: c031ce20 Oct 3 07:52:47.773636 (XEN) R4: c1909d80 R5: c1b12200 R6: c1904d1c R7: c1904d78 Oct 3 07:52:47.773669 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c00 Oct 3 07:52:47.785652 (XEN) USR: SP: be960118 LR: b6a3306d Oct 3 07:52:47.785686 (XEN) SVC: SP: c1901f40 LR: c0308df0 SPSR:60030013 Oct 3 07:52:47.785711 (XEN) ABT: SP: c1b22b10 LR: c03011c0 SPSR:600f0193 Oct 3 07:52:47.797753 (XEN) UND: SP: c1b22b20 LR: c0300fa0 SPSR:60030093 Oct 3 07:52:47.797807 (XEN) IRQ: SP: c1b22b00 LR: c0300ba0 SPSR:60030193 Oct 3 07:52:47.809659 (XEN) FIQ: SP: c1b22b30 LR: c1b22b30 SPSR:00000000 Oct 3 07:52:47.809693 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 07:52:47.809720 (XEN) Oct 3 07:52:47.821638 (XEN) SCTLR: 10c5387d Oct 3 07:52:47.821666 (XEN) TCR: 00000000 Oct 3 07:52:47.821690 (XEN) TTBR0: 0000000066a2406a Oct 3 07:52:47.821713 (XEN) TTBR1: 000000006020406a Oct 3 07:52:47.821736 (XEN) IFAR: b6ece96c, IFSR: 00000007 Oct 3 07:52:47.833631 (XEN) DFAR: b6baf000, DFSR: 0000081f Oct 3 07:52:47.833661 (XEN) Oct 3 07:52:47.833682 (XEN) VTCR_EL2: 80003558 Oct 3 07:52:47.833704 (XEN) VTTBR_EL2: 00010000bef8a000 Oct 3 07:52:47.845635 (XEN) Oct 3 07:52:47.845662 (XEN) SCTLR_EL2: 30cd187f Oct 3 07:52:47.845685 (XEN) HCR_EL2: 007c663f Oct 3 07:52:47.845708 (XEN) TTBR0_EL2: 000000004111d000 Oct 3 07:52:47.845730 (XEN) Oct 3 07:52:47.845751 (XEN) ESR_EL2: 07e00000 Oct 3 07:52:47.857799 (XEN) HPFAR_EL2: 00104810 Oct 3 07:52:47.857863 (XEN) HDFAR: e0807f00 Oct 3 07:52:47.857906 (XEN) HIFAR: c042b7a4 Oct 3 07:52:47.857929 (XEN) Oct 3 07:52:47.857949 (XEN) Guest stack trace from sp=c1901f40: Oct 3 07:52:47.869628 (XEN) Failed to convert stack to physical address Oct 3 07:52:47.869658 (XEN) *** Dumping Dom0 vcpu#1 state: *** Oct 3 07:52:47.869683 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 07:52:47.881656 (XEN) CPU: 0 Oct 3 07:52:47.881686 (XEN) PC: c031ce28 Oct 3 07:52:47.881709 (XEN) CPSR: 600d0093 MODE:32-bit Guest SVC Oct 3 07:52:47.881734 (XEN) R0: 00000005 R1: 00000000 R2: 002e6ff1 R3: c031ce20 Oct 3 07:52:47.893661 (XEN) R4: c210e600 R5: c1b12200 R6: c1904d1c R7: c1904d78 Oct 3 07:52:47.893695 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c00 Oct 3 07:52:47.905799 (XEN) USR: SP: be82b948 LR: b6b66893 Oct 3 07:52:47.905851 (XEN) SVC: SP: e08c9f90 LR: c0308df0 SPSR:600d0013 Oct 3 07:52:47.905877 (XEN) ABT: SP: c1b22b50 LR: c0300ea0 SPSR:600f0193 Oct 3 07:52:47.917745 (XEN) UND: SP: c1b22b60 LR: c0300fa0 SPSR:600d0093 Oct 3 07:52:47.917792 (XEN) IRQ: SP: c1b22b40 LR: c0300ba0 SPSR:600d0193 Oct 3 07:52:47.929667 (XEN) FIQ: SP: c1b22b70 LR: c1b22b70 SPSR:00000000 Oct 3 07:52:47.929702 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 07:52:47.941662 (XEN) Oct 3 07:52:47.941691 (XEN) SCTLR: 10c5387d Oct 3 07:52:47.941715 (XEN) TCR: 00000000 Oct 3 07:52:47.941737 (XEN) TTBR0: 0000000064b3006a Oct 3 07:52:47.941761 (XEN) TTBR1: 000000006020406a Oct 3 07:52:47.953643 (XEN) IFAR: b6e01814, IFSR: 00000007 Oct 3 07:52:47.953677 (XEN) DFAR: 0058e318, DFSR: 0000081f Oct 3 07:52:47.953732 (XEN) Oct 3 07:52:47.953755 (XEN) VTCR_EL2: 80003558 Oct 3 07:52:47.953778 (XEN) VTTBR_EL2: 00010000bef8a000 Oct 3 07:52:47.965663 (XEN) Oct 3 07:52:47.965694 (XEN) SCTLR_EL2: 30cd187f Oct 3 07:52:47.965718 (XEN) HCR_EL2: 007c663f Oct 3 07:52:47.965741 (XEN) TTBR0_EL2: 000000004111d000 Oct 3 07:52:47.965764 (XEN) Oct 3 07:52:47.965785 (XEN) ESR_EL2: 07e00000 Oct 3 07:52:47.977808 (XEN) HPFAR_EL2: 00104810 Oct 3 07:52:47.977893 (XEN) HDFAR: e0807f00 Oct 3 07:52:47.977949 (XEN) HIFAR: c042b7a4 Oct 3 07:52:47.978002 (XEN) Oct 3 07:52:47.978051 (XEN) Guest stack trace from sp=e08c9f90: Oct 3 07:52:47.989722 (XEN) Failed to convert stack to physical address Oct 3 07:52:47.989778 Oct 3 07:52:49.777102 (XEN) 'H' pressed -> dumping heap info (now = 1644724947375) Oct 3 07:52:49.797836 (XEN) heap[node=0][zone=0] -> 16276 pages Oct 3 07:52:49.797896 (XEN) heap[node=0][zone=1] -> 0 Oct 3 07:52:49.800277 pages Oct 3 07:52:49.809674 (XEN) heap[node=0][zone=2] -> 0 pages Oct 3 07:52:49.809734 (XEN) heap[node=0][zone=3] -> 0 pages Oct 3 07:52:49.809780 (XEN) heap[node=0][zone=4] -> 0 pages Oct 3 07:52:49.809823 (XEN) heap[node=0][zone=5] -> 0 pages Oct 3 07:52:49.821773 (XEN) heap[node=0][zone=6] -> 0 pages Oct 3 07:52:49.821832 (XEN) heap[node=0][zone=7] -> 0 pages Oct 3 07:52:49.821877 (XEN) heap[node=0][zone=8] -> 0 pages Oct 3 07:52:49.833770 (XEN) heap[node=0][zone=9] -> 0 pages Oct 3 07:52:49.833830 (XEN) heap[node=0][zone=10] -> 0 pages Oct 3 07:52:49.833875 (XEN) heap[node=0][zone=11] -> 0 pages Oct 3 07:52:49.833918 (XEN) heap[node=0][zone=12] -> 0 pages Oct 3 07:52:49.845769 (XEN) heap[node=0][zone=13] -> 0 pages Oct 3 07:52:49.845828 (XEN) heap[node=0][zone=14] -> 0 pages Oct 3 07:52:49.845873 (XEN) heap[node=0][zone=15] -> 0 pages Oct 3 07:52:49.857768 (XEN) heap[node=0][zone=16] -> 0 pages Oct 3 07:52:49.857827 (XEN) heap[node=0][zone=17] -> 0 pages Oct 3 07:52:49.857873 (XEN) heap[node=0][zone=18] -> 0 pages Oct 3 07:52:49.857917 (XEN) heap[node=0][zone=19] -> 130813 pages Oct 3 07:52:49.869775 (XEN) heap[node=0][zone=20] -> 241607 pages Oct 3 07:52:49.869840 (XEN) heap[node=0][zone=21] -> 0 pages Oct 3 07:52:49.869882 (XEN) heap[node=0][zone=22] -> 0 pages Oct 3 07:52:49.881764 (XEN) heap[node=0][zone=23] -> 0 pages Oct 3 07:52:49.881822 (XEN) heap[node=0][zone=24] -> 0 pages Oct 3 07:52:49.881868 (XEN) heap[node=0][zone=25] -> 0 pages Oct 3 07:52:49.893742 (XEN) heap[node=0][zone=26] -> 0 pages Oct 3 07:52:49.893801 (XEN) heap[node=0][zone=27] -> 0 pages Oct 3 07:52:49.893847 (XEN) heap[node=0][zone=28] -> 0 pages Oct 3 07:52:49.893890 Oct 3 07:52:51.825157 Oct 3 07:52:53.544595 Oct 3 07:52:53.785493 Oct 3 07:52:55.551880 Oct 3 07:52:55.790834 (XEN) Dumping timer queues: Oct 3 07:52:55.805808 (XEN) CPU00: Oct 3 07:52:55.805863 (XEN) ex= 8952us timer=43ff9070 cb=common/sched/credit.c#csched_acct(43ff9008) Oct 3 07:52:55.805919 (XEN Oct 3 07:52:55.808246 ) ex= 77825us timer=43fee968 cb=arch/arm/vtimer.c#virt_timer_expired(43fee960) Oct 3 07:52:55.817734 (XEN) CPU01: Oct 3 07:52:55.817784 (XEN) ex= 136366us timer=43fdc968 cb=arch/arm/vtimer.c#virt_timer_expired(43fdc960) Oct 3 07:52:55.829701 Oct 3 07:52:57.796360 Oct 3 07:52:59.559556 Oct 3 07:52:59.796822 (XEN) 'd' pressed -> dumping registers Oct 3 07:52:59.821796 (XEN) Oct 3 07:52:59.821850 (XEN) *** Dumping CPU0 host state: *** Oct 3 07:52:59.821897 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Oct 3 07:52:59.824191 Not tainted ]---- Oct 3 07:52:59.833722 (XEN) CPU: 0 Oct 3 07:52:59.833773 (XEN) PC: 00269e8c arch/arm/domain.c#idle_loop+0x134/0x1b0 Oct 3 07:52:59.833824 (XEN) CPSR: 6001005a MODE:Hypervisor Oct 3 07:52:59.845760 (XEN) R0: 00000000 R1: 00000001 R2: 00000000 R3: 00000000 Oct 3 07:52:59.845822 (XEN) R4: 00000000 R5: 00310108 R6: 0034333c R7: 00000001 Oct 3 07:52:59.845871 (XEN) R8: 00340108 R9: 00000000 R10:40e00000 R11:4003ff54 R12:fffffffc Oct 3 07:52:59.857728 (XEN) HYP: SP: 4003ff44 LR: 0022c2d0 Oct 3 07:52:59.857787 (XEN) Oct 3 07:52:59.857827 (XEN) VTCR_EL2: 80003558 Oct 3 07:52:59.869772 (XEN) VTTBR_EL2: 00010000bef8a000 Oct 3 07:52:59.869831 (XEN) Oct 3 07:52:59.869872 (XEN) SCTLR_EL2: 30cd187f Oct 3 07:52:59.869915 (XEN) HCR_EL2: 007c663f Oct 3 07:52:59.869957 (XEN) TTBR0_EL2: 000000004111d000 Oct 3 07:52:59.881761 (XEN) Oct 3 07:52:59.881816 (XEN) ESR_EL2: 07e00000 Oct 3 07:52:59.881860 (XEN) HPFAR_EL2: 00104810 Oct 3 07:52:59.881902 (XEN) HDFAR: e0807f00 Oct 3 07:52:59.881944 (XEN) HIFAR: c042b7a4 Oct 3 07:52:59.881986 (XEN) Oct 3 07:52:59.882024 (XEN) Xen stack trace from sp=4003ff44: Oct 3 07:52:59.893779 (XEN) 07e00000 002ac008 002a102c 4003ff4c 00272664 00000000 00000000 00000000 Oct 3 07:52:59.893843 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 07:52:59.905766 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 07:52:59.917757 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 07:52:59.917821 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 07:52:59.929755 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 07:52:59.929816 (XEN) Xen call trace: Oct 3 07:52:59.929860 (XEN) [<00269e8c>] arch/arm/domain.c#idle_loop+0x134/0x1b0 (PC) Oct 3 07:52:59.941750 (XEN) [<0022c2d0>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 07:52:59.941810 (XEN) [<00272664>] arch_get_xen_caps+0/0x90 Oct 3 07:52:59.953759 (XEN) Oct 3 07:52:59.953812 (XEN) *** Dumping CPU1 host state: *** Oct 3 07:52:59.953858 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 07:52:59.953906 (XEN) CPU: 1 Oct 3 07:52:59.965741 (XEN) PC: 00269e8c arch/arm/domain.c#idle_loop+0x134/0x1b0 Oct 3 07:52:59.965804 (XEN) CPSR: 600d005a MODE:Hypervisor Oct 3 07:52:59.965850 (XEN) R0: 00000000 R1: 00000001 R2: 3fcf6000 R3: 00000000 Oct 3 07:52:59.977758 (XEN) R4: 00000001 R5: 00310108 R6: 0034333c R7: 00000002 Oct 3 07:52:59.977819 (XEN) R8: 00340108 R9: 00000001 R10:40e00000 R11:4000ff54 R12:fffffffc Oct 3 07:52:59.989755 (XEN) HYP: SP: 4000ff44 LR: 0022c2d0 Oct 3 07:52:59.989813 (XEN) Oct 3 07:52:59.989853 (XEN) VTCR_EL2: 80003558 Oct 3 07:52:59.989895 (XEN) VTTBR_EL2: 00010000bef8a000 Oct 3 07:53:00.001758 (XEN) Oct 3 07:53:00.001811 (XEN) SCTLR_EL2: 30cd187f Oct 3 07:53:00.001855 (XEN) HCR_EL2: 007c663f Oct 3 07:53:00.001897 (XEN) TTBR0_EL2: 00000000ba004000 Oct 3 07:53:00.001939 (XEN) Oct 3 07:53:00.001977 (XEN) ESR_EL2: 07e00000 Oct 3 07:53:00.013759 (XEN) HPFAR_EL2: 00104810 Oct 3 07:53:00.013816 (XEN) HDFAR: e0807f00 Oct 3 07:53:00.013860 (XEN) HIFAR: c09f6d20 Oct 3 07:53:00.013902 (XEN) Oct 3 07:53:00.013940 (XEN) Xen stack trace from sp=4000ff44: Oct 3 07:53:00.025767 (XEN) 07e00000 00311390 00000001 4000ff3c 00272f48 00000000 00000000 00000000 Oct 3 07:53:00.025832 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 07:53:00.037745 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 07:53:00.037808 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 07:53:00.049767 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 07:53:00.049847 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 07:53:00.061753 (XEN) Xen call trace: Oct 3 07:53:00.061809 (XEN) [<00269e8c>] arch/arm/domain.c#idle_loop+0x134/0x1b0 (PC) Oct 3 07:53:00.073764 (XEN) [<0022c2d0>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 07:53:00.073825 (XEN) [<00272f48>] start_secondary+0x208/0x20c Oct 3 07:53:00.073873 (XEN) Oct 3 07:53:00.073912 Oct 3 07:53:01.801712 (XEN) 'e' pressed -> dumping event-channel info Oct 3 07:53:01.825782 (XEN) Event channel information for domain 0: Oct 3 07:53:01.825841 (XEN) Polling vCPUs: {} Oct 3 07:53:01.825884 (XEN) port Oct 3 07:53:01.828012 [p/m/s] Oct 3 07:53:01.837729 (XEN) 1 [0/0/ - ]: s=3 n=1 x=0 d=0 p=4 Oct 3 07:53:01.837787 (XEN) 2 [0/0/ - ]: s=5 n=0 x=0 v=2 Oct 3 07:53:01.837834 (XEN) 3 [0/0/ - ]: s=5 n=1 x=0 v=3 Oct 3 07:53:01.849728 (XEN) 4 [0/0/ - ]: s=3 n=0 x=0 d=0 p=1 Oct 3 07:53:01.849788 Oct 3 07:53:03.799622 (XEN) gnttab_usage_print_all [ key 'g' pressed Oct 3 07:53:03.825869 (XEN) -------- active -------- -------- shared -------- Oct 3 07:53:03.825931 (XEN) [ref] localdo Oct 3 07:53:03.828414 m mfn pin localdom gmfn flags Oct 3 07:53:03.837760 (XEN) grant-table for remote d0 (v1) Oct 3 07:53:03.837815 (XEN) 1 frames (64 max), 5 maptrack frames (1024 max) Oct 3 07:53:03.849752 (XEN) no active grant table entries Oct 3 07:53:03.849811 (XEN) gnttab_usage_print_all ] done Oct 3 07:53:03.849856 Oct 3 07:53:05.804703 Oct 3 07:53:07.573477 Oct 3 07:53:07.808937 (XEN) Physical memory information: Oct 3 07:53:07.825879 (XEN) Xen heap: 65104kB free Oct 3 07:53:07.825940 (XEN) heap[19]: 523252kB free Oct 3 07:53:07.825984 (XEN) heap[20]: 966428kB fr Oct 3 07:53:07.828168 ee Oct 3 07:53:07.837727 (XEN) Dom heap: 1489680kB free Oct 3 07:53:07.837786 Oct 3 07:53:09.812336 Oct 3 07:53:11.582468 Oct 3 07:53:11.816821 (XEN) sched_smt_power_savings: disabled Oct 3 07:53:11.841881 (XEN) NOW=1666769214833 Oct 3 07:53:11.841939 (XEN) Online Cpus: 0-1 Oct 3 07:53:11.841982 (XEN) Cpupool 0: Oct 3 07:53:11.842022 (XEN) Cpus: 0-1 Oct 3 07:53:11.842062 (XEN) Sche Oct 3 07:53:11.844293 duling granularity: cpu, 1 CPU per sched-resource Oct 3 07:53:11.853759 (XEN) Scheduler: SMP Credit Scheduler (credit) Oct 3 07:53:11.853815 (XEN) info: Oct 3 07:53:11.853857 (XEN) ncpus = 2 Oct 3 07:53:11.865843 (XEN) master = 0 Oct 3 07:53:11.865901 (XEN) credit = 600 Oct 3 07:53:11.865946 (XEN) credit balance = 596 Oct 3 07:53:11.865988 (XEN) weight = 0 Oct 3 07:53:11.866030 (XEN) runq_sort = 50707 Oct 3 07:53:11.877815 (XEN) default-weight = 256 Oct 3 07:53:11.877873 (XEN) tslice = 30ms Oct 3 07:53:11.877917 (XEN) ratelimit = 1000us Oct 3 07:53:11.877960 (XEN) credits per msec = 10 Oct 3 07:53:11.889763 (XEN) ticks per tslice = 3 Oct 3 07:53:11.889820 (XEN) migration delay = 0us Oct 3 07:53:11.889864 (XEN) idlers: 2 Oct 3 07:53:11.889905 (XEN) active units: Oct 3 07:53:11.889946 (XEN) CPUs info: Oct 3 07:53:11.901757 (XEN) CPU[00] current=d[IDLE]v0, curr=d[IDLE]v0, prev=NULL Oct 3 07:53:11.901820 (XEN) CPU[00] nr_run=0, sort=50706, sibling={0}, core={0-1} Oct 3 07:53:11.901869 (XEN) CPU[01] current=d[IDLE]v1, curr=d[IDLE]v1, prev=NULL Oct 3 07:53:11.913756 (XEN) CPU[01] nr_run=0, sort=50706, sibling={1}, core={0-1} Oct 3 07:53:11.913880 Oct 3 07:53:13.820832 Oct 3 07:53:15.591241 Oct 3 07:53:15.829020 (XEN) Synced stime skew: max=83ns avg=83ns samples=1 current=83ns Oct 3 07:53:15.845798 (XEN) Synced cycles skew: max=0 avg=0 samples=1 current=0 Oct 3 07:53:15.845859 Oct 3 07:53:15.847985 Oct 3 07:53:17.829599 Oct 3 07:53:19.600435 Oct 3 07:53:19.833164 Oct 3 07:53:21.612695 Oct 3 07:53:21.853553 Oct 3 07:53:23.619476 Oct 3 07:53:33.877291 (XEN) 'q' pressed -> dumping domain info (now = 1688818185291) Oct 3 07:53:33.893780 (XEN) General information for domain 0: Oct 3 07:53:33.893845 (XEN) refcnt=3 dying=0 paus Oct 3 07:53:33.896171 e_count=0 Oct 3 07:53:33.905712 (XEN) nr_pages=131072 xenheap_pages=2 dirty_cpus={} max_pages=131072 Oct 3 07:53:33.905775 (XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=00000020 Oct 3 07:53:33.917773 (XEN) p2m mappings for domain 0 (vmid 1): Oct 3 07:53:33.917833 (XEN) 1G mappings: 0 (shattered 0) Oct 3 07:53:33.917879 (XEN) 2M mappings: 237 (shattered 19) Oct 3 07:53:33.929653 (XEN) 4K mappings: 4761 Oct 3 07:53:33.929653 (XEN) Rangesets belonging to domain 0: Oct 3 07:53:33.929653 (XEN) Interrupts { 32-72, 74, 77-79, 82-84, 86, 88-100, 103-104, 107-110, 114, 116-120, 123, 126-128, 138, 144, 146-147, 149-151, 156 } Oct 3 07:53:33.941647 (XEN) I/O Memory { 2020-2050, 3810-3811, 3830-3831, 3860-3861, 10000-10001, 10010-10045, 10050-10055, 10060-10061, 101b0-101b1, 101d0-101d1, 101e0-101e1, 10440-10441, 10800-10801, 10830-10831, 10850-10851, 10a60-10a61, 10d10-10d11, 11000-11010, 11200-11201, 11210-11211, 11400-11401, 11800-11805, 11c00-11c01, 11c10-11c11, 11d40-11d41, 11f20-11f21, 12000-12010, 12100-12101, 12110-12111, 12120-12121, 12130-12131, 12170-12171, 121a0-121a1, 121b0-121b1, 121d0-121d1, 12200-12201, 12210-12211, 12220-12221, 12230-12231, 12250-12251, 122f0-122f1, 12c00-12c01, 12c10-12c11, 12c30-12c31, 12c60-12c61, 12c70-12c71, 12c80-12c81, 12c90-12c91, 12ca0-12ca1, 12cb0-12cb1, 12cc0-12cc1, 12cd0-12cd1, 12ce0-12ce1, 12d10-12d11, 12d20-12d21, 12d30-12d31, 12d40-12d41, 12d60-12d61, 12d70-12d71, 12dd0-12dd1, 13260-13261, 13270-13271, 13280-13281, 13290-13291, 132a0-132a1, 132b0-132b1, 132c0-132c1, 132d0-132d1, 132e0-132e1, 132f0-132f1, 13400-13401, 13c40-13c41, 13c50-13c51, 13e00-13e01, 13e10-13e11, 13e20-13e21, 13e30-13e31, 13e80-13e81, 13e90-13e91, 13ea0-13ea1, 13eb0-13eb1, 14400-14440, 14450-14460, 14500-14510, 14530-145a0, 145b0-145b1, 14640-14641, 14650-14651 } Oct 3 07:53:34.037801 (XEN) NODE affinity for domain 0: [0] Oct 3 07:53:34.049761 (XEN) VCPU information and callbacks for domain 0: Oct 3 07:53:34.049822 (XEN) UNIT0 affinities: hard={0-1} soft={0-1} Oct 3 07:53:34.049871 (XEN) VCPU0: CPU0 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 07:53:34.061787 (XEN) pause_count=0 pause_flags=0 Oct 3 07:53:34.061847 (XEN) GICH_LRs (vcpu 0) mask=0 Oct 3 07:53:34.061892 (XEN) VCPU_LR[0]=0 Oct 3 07:53:34.073757 (XEN) VCPU_LR[1]=0 Oct 3 07:53:34.073813 (XEN) VCPU_LR[2]=0 Oct 3 07:53:34.073857 (XEN) VCPU_LR[3]=0 Oct 3 07:53:34.073898 (XEN) Inflight irq=103 lr=255 Oct 3 07:53:34.073942 (XEN) Inflight irq=27 lr=255 Oct 3 07:53:34.085752 (XEN) Pending irq=103 Oct 3 07:53:34.085808 (XEN) Pending irq=27 Oct 3 07:53:34.085851 (XEN) No periodic timer Oct 3 07:53:34.085894 (XEN) UNIT1 affinities: hard={0-1} soft={0-1} Oct 3 07:53:34.085940 (XEN) VCPU1: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 07:53:34.097817 (XEN) pause_count=0 pause_flags=1 Oct 3 07:53:34.097876 (XEN) GICH_LRs (vcpu 1) mask=0 Oct 3 07:53:34.097921 (XEN) VCPU_LR[0]=0 Oct 3 07:53:34.109766 (XEN) VCPU_LR[1]=0 Oct 3 07:53:34.109821 (XEN) VCPU_LR[2]=0 Oct 3 07:53:34.109863 (XEN) VCPU_LR[3]=0 Oct 3 07:53:34.109904 (XEN) No periodic timer Oct 3 07:53:34.109945 (XEN) Notifying guest 0:0 (virq 1, port 0) Oct 3 07:53:34.121745 (XEN) Notifying guest 0:1 (virq 1, port 0) Oct 3 07:53:34.121804 Oct 3 07:53:45.868863 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 07:53:45.889826 Oct 3 07:53:45.889879 arndale-westfield login: Oct 3 07:53:45.891784 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 07:54:26.149792 [ 1762.175790] sd 0:0:0:0: [sda] Synchronizing SCSI cache Oct 3 07:54:52.493622 [ 1762.184861] wake enabled for irq 119 (gpx1-4) Oct 3 07:54:52.505642 [ 1762.187850] wake enabled for irq 120 (gpx1-5) Oct 3 07:54:52.517669 [ 1762.192330] wake enabled for irq 121 (gpx1-6) Oct 3 07:54:52.517669 [ 1762.196703] wake enabled for irq 122 (gpx1-7) Oct 3 07:54:52.517669 [ 1762.201151] wake enabled for irq 123 (gpx2-0) Oct 3 07:54:52.529639 [ 1762.205557] wake enabled for irq 124 (gpx2-1) Oct 3 07:54:52.529639 [ 1762.210467] reboot: Resô Oct 3 07:54:52.865604 Oct 3 07:54:52.865604 Oct 3 07:54:52.865604 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 07:54:52.877645 Oct 3 07:54:52.877645 CPU: Exynos5250@1000MHz Oct 3 07:54:52.877645 Oct 3 07:54:52.877645 Board: Arndale Oct 3 07:54:52.877645 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 07:54:52.877645 ready Oct 3 07:54:52.877645 DRAM: 2 GiB Oct 3 07:54:52.889550 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 07:54:52.901698 trace: enabled Oct 3 07:54:52.937723 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 07:54:53.297737 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 07:54:53.357765 In: serial Oct 3 07:54:53.357819 Out: serial Oct 3 07:54:53.357861 Err: serial Oct 3 07:54:53.357902 SCSI: ARNDALE SCSI INIT Oct 3 07:54:53.357945 Target spinup took 0 ms. Oct 3 07:54:53.369703 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 07:54:53.369767 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 07:54:53.381782 Net: Net Initialization Skipped Oct 3 07:54:53.381841 No ethernet found. Oct 3 07:54:53.381883 Hostname: arndale-westfield Oct 3 07:54:53.381927 Hit any key to stop autoboot: 2  1  0 Oct 3 07:54:55.313742 (Re)start USB... Oct 3 07:54:55.313799 USB0: USB EHCI 1.00 Oct 3 07:54:55.313843 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 07:55:00.909797 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 07:55:00.921756 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 07:55:01.365724 Waiting for Ethernet connection... done. Oct 3 07:55:03.013643 BOOTP broadcast 1 Oct 3 07:55:03.013695 BOOTP broadcast 2 Oct 3 07:55:05.581741 DHCP client bound to address 10.149.64.45 (2684 ms) Oct 3 07:55:05.593790 Using asx0 device Oct 3 07:55:05.593847 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 07:55:05.593898 Filename 'pxelinux.0'. Oct 3 07:55:05.605703 Load address: 0x43e00000 Oct 3 07:55:05.605761 Loading: *### Oct 3 07:55:05.617711 2.4 MiB/s Oct 3 07:55:05.617766 done Oct 3 07:55:05.617808 Bytes transferred = 42430 (a5be hex) Oct 3 07:55:05.617854 missing environment variable: pxeuuid Oct 3 07:55:05.629742 Retrieving file: pxelinux.cfg/0A95402D Oct 3 07:55:05.629801 Using asx0 device Oct 3 07:55:05.629844 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 07:55:05.641743 Filename 'pxelinux.cfg/0A95402D'. Oct 3 07:55:05.641802 Load address: 0x51000000 Oct 3 07:55:05.641888 Loading: *# Oct 3 07:55:05.641932 355.5 KiB/s Oct 3 07:55:05.641973 done Oct 3 07:55:05.642011 Bytes transferred = 728 (2d8 hex) Oct 3 07:55:05.653755 Config file found Oct 3 07:55:05.653809 Ignoring unknown command: serial Oct 3 07:55:05.653854 1: ^Overwrite Oct 3 07:55:05.653896 Retrieving file: /osstest/tmp//arndale-westfield--initrd.gz Oct 3 07:55:05.665746 Using asx0 device Oct 3 07:55:05.665801 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 07:55:05.665850 Filename '/osstest/tmp//arndale-westfield--initrd.gz'. Oct 3 07:55:05.677687 Load address: 0x43300000 Oct 3 07:55:05.677743 Loading: *################################################################# Oct 3 07:55:05.917676 ################################################################# Oct 3 07:55:06.169671 ################################################################# Oct 3 07:55:06.409661 ################################################################# Oct 3 07:55:06.661670 ################################################################# Oct 3 07:55:06.901674 ################################################################# Oct 3 07:55:07.153664 ################################################################# Oct 3 07:55:07.393679 ################################################################# Oct 3 07:55:07.633668 ################################################################# Oct 3 07:55:07.885653 ################################################################# Oct 3 07:55:08.125701 ################################################################# Oct 3 07:55:08.365684 ################################################################# Oct 3 07:55:08.617700 ################################################################# Oct 3 07:55:08.869582 ################################################################# Oct 3 07:55:09.121577 ################################################################# Oct 3 07:55:09.385650 ################################################################# Oct 3 07:55:09.625676 ################################################################# Oct 3 07:55:09.869670 ################################################################# Oct 3 07:55:10.133631 ################################################################# Oct 3 07:55:10.461692 ################################################################# Oct 3 07:55:10.785684 ################################################################# Oct 3 07:55:11.109697 ################################################################# Oct 3 07:55:11.433672 ################################################################# Oct 3 07:55:11.757657 ################################################################# Oct 3 07:55:12.081726 ################################################################# Oct 3 07:55:12.393669 ################################################################# Oct 3 07:55:12.717577 ################################################################# Oct 3 07:55:13.041576 ######################################## Oct 3 07:55:13.245695 3.2 MiB/s Oct 3 07:55:13.245751 done Oct 3 07:55:13.245792 Bytes transferred = 26339178 (191e76a hex) Oct 3 07:55:13.245839 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/linux Oct 3 07:55:13.257763 Using asx0 device Oct 3 07:55:13.257819 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 07:55:13.269721 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/linux'. Oct 3 07:55:13.269785 Load address: 0x42000000 Oct 3 07:55:13.269829 Loading: *################################################################# Oct 3 07:55:13.593731 ################################################################# Oct 3 07:55:13.917673 ################################################################# Oct 3 07:55:14.253696 ################################################################# Oct 3 07:55:14.577708 ################################################################# Oct 3 07:55:14.877653 ############################################# Oct 3 07:55:15.093695 2.7 MiB/s Oct 3 07:55:15.093750 done Oct 3 07:55:15.093790 Bytes transferred = 5427712 (52d200 hex) Oct 3 07:55:15.093836 append: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=41661 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 07:55:15.141761 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb Oct 3 07:55:15.153765 Using asx0 device Oct 3 07:55:15.153821 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 07:55:15.153871 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb'. Oct 3 07:55:15.165714 Load address: 0x43000000 Oct 3 07:55:15.165769 Loading: *#### Oct 3 07:55:15.177673 2.3 MiB/s Oct 3 07:55:15.189752 done Oct 3 07:55:15.189805 Bytes transferred = 46686 (b65e hex) Oct 3 07:55:15.189851 Kernel image @ 0x42000000 [ 0x000000 - 0x52d200 ] Oct 3 07:55:15.189897 ## Flattened Device Tree blob at 43000000 Oct 3 07:55:15.201716 Booting using the fdt blob at 0x43000000 Oct 3 07:55:15.201775 Loading Ramdisk to 4e6e1000, end 4ffff76a ... OK Oct 3 07:55:15.621700 Loading Device Tree to 4e6d2000, end 4e6e065d ... OK Oct 3 07:55:15.633714 Oct 3 07:55:15.633766 Starting kernel ...(fake run for tracing) Oct 3 07:55:15.645687 Oct 3 07:55:15.645738 Oct 3 07:55:15.645777 Starting kernel ... Oct 3 07:55:15.645819 Oct 3 07:55:15.645857 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 07:55:21.733746 [ 0.000000] Linux version 6.1.0-25-armmp (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.106-3 (2024-08-26) Oct 3 07:55:21.757741 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 07:55:21.757805 [ 0.000000] CPU: div instructions available: patching division code Oct 3 07:55:21.769721 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 07:55:21.769785 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 07:55:21.781763 [ 0.000000] Memory policy: Data cache writealloc Oct 3 07:55:21.781822 [ 0.000000] efi: UEFI not found. Oct 3 07:55:21.793759 [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 Oct 3 07:55:21.793818 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 07:55:21.793864 [ 0.000000] Zone ranges: Oct 3 07:55:21.805738 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 07:55:21.805799 [ 0.000000] Normal empty Oct 3 07:55:21.805843 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 07:55:21.817752 [ 0.000000] Movable zone start for each node Oct 3 07:55:21.817812 [ 0.000000] Early memory node ranges Oct 3 07:55:21.829754 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 07:55:21.829816 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 07:55:21.841729 [ 0.000000] percpu: Embedded 18 pages/cpu s44692 r8192 d20844 u73728 Oct 3 07:55:21.841787 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 07:55:21.853728 [ 0.000000] Kernel command line: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=41661 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 07:55:21.889819 [ 0.000000] Unknown kernel command line parameters "preseed --- vga=normal auto=true hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=41661 domain=test-lab.xenproject.org", will be passed to user space. Oct 3 07:55:21.937805 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 07:55:21.937875 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 07:55:21.949821 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 07:55:21.949884 [ 0.000000] Memory: 2015968K/2097152K available (11264K kernel code, 1696K rwdata, 3724K rodata, 2048K init, 376K bss, 64800K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 07:55:21.973817 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 07:55:21.973881 [ 0.000000] ftrace: allocating 39612 entries in 117 pages Oct 3 07:55:21.985810 [ 0.000000] ftrace: allocated 117 pages with 5 groups Oct 3 07:55:21.985871 [ 0.000000] trace event string verifier disabled Oct 3 07:55:21.985919 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 07:55:21.997791 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 07:55:21.997856 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 07:55:22.009829 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 07:55:22.009890 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 07:55:22.021828 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 07:55:22.021891 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 07:55:22.033812 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 07:55:22.033873 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 07:55:22.045797 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 07:55:22.045860 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 07:55:22.057813 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 07:55:22.069805 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 07:55:22.069875 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 07:55:22.081816 [ 0.002610] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 07:55:22.081878 [ 0.002624] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 07:55:22.093821 [ 0.002638] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 07:55:22.105808 [ 0.002650] Ignoring duplicate/late registration of read_current_timer delay Oct 3 07:55:22.105872 [ 0.003011] Console: colour dummy device 80x30 Oct 3 07:55:22.117684 [ 0.003052] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 07:55:22.129713 [ 0.003066] CPU: Testing write buffer coherency: ok Oct 3 07:55:22.129775 [ 0.003108] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 07:55:22.141751 [ 0.003117] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 07:55:22.141814 [ 0.003123] pid_max: default: 32768 minimum: 301 Oct 3 07:55:22.153714 [ 0.003482] LSM: Security Framework initializing Oct 3 07:55:22.153774 [ 0.003554] landlock: Up and running. Oct 3 07:55:22.165731 [ 0.003559] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 07:55:22.165817 [ 0.003742] AppArmor: AppArmor initialized Oct 3 07:55:22.165867 [ 0.003754] TOMOYO Linux initialized Oct 3 07:55:22.177739 [ 0.003794] LSM support for eBPF active Oct 3 07:55:22.177798 [ 0.004036] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 07:55:22.189740 [ 0.004049] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 07:55:22.189809 [ 0.005473] /cpus/cpu@0 missing clock-frequency property Oct 3 07:55:22.201771 [ 0.005501] /cpus/cpu@1 missing clock-frequency property Oct 3 07:55:22.201834 [ 0.005514] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 07:55:22.213718 [ 0.006462] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 07:55:22.213815 [ 0.006468] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 07:55:22.225736 [ 0.006571] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 07:55:22.225804 [ 0.006576] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 07:55:22.237756 [ 0.006721] Setting up static identity map for 0x40300000 - 0x403000ac Oct 3 07:55:22.237818 [ 0.007874] rcu: Hierarchical SRCU implementation. Oct 3 07:55:22.249639 [ 0.007880] rcu: Max phase no-delay instances is 1000. Oct 3 07:55:22.249673 [ 0.009992] EFI services will not be available. Oct 3 07:55:22.261642 [ 0.010338] smp: Bringing up secondary CPUs ... Oct 3 07:55:22.261675 [ 0.011074] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 07:55:22.261702 [ 0.011087] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 07:55:22.273644 [ 0.011230] smp: Brought up 1 node, 2 CPUs Oct 3 07:55:22.285624 [ 0.011239] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 07:55:22.285659 [ 0.011247] CPU: All CPU(s) started in HYP mode. Oct 3 07:55:22.285685 [ 0.011251] CPU: Virtualization extensions available. Oct 3 07:55:22.297648 [ 0.011874] devtmpfs: initialized Oct 3 07:55:22.297680 [ 0.023244] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 07:55:22.309743 [ 0.023477] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 07:55:22.321717 [ 0.023503] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 07:55:22.321782 [ 0.024020] pinctrl core: initialized pinctrl subsystem Oct 3 07:55:22.333748 [ 0.024722] DMI not present or invalid. Oct 3 07:55:22.333807 [ 0.025394] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 07:55:22.333857 [ 0.030815] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 07:55:22.345744 [ 0.032363] audit: initializing netlink subsys (disabled) Oct 3 07:55:22.345806 [ 0.032568] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 Oct 3 07:55:22.357749 [ 0.033723] thermal_sys: Registered thermal governor 'fair_share' Oct 3 07:55:22.369748 [ 0.033730] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 07:55:22.369810 [ 0.033735] thermal_sys: Registered thermal governor 'step_wise' Oct 3 07:55:22.381757 [ 0.033739] thermal_sys: Registered thermal governor 'user_space' Oct 3 07:55:22.381820 [ 0.033744] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 07:55:22.393745 [ 0.034121] No ATAGs? Oct 3 07:55:22.393801 [ 0.034189] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 07:55:22.393858 [ 0.034198] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 07:55:22.405762 [ 0.035280] Serial: AMBA PL011 UART driver Oct 3 07:55:22.405821 [ 0.084736] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 07:55:22.417763 [ 0.091743] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 07:55:22.429717 [ 0.102757] iommu: Default domain type: Translated Oct 3 07:55:22.429795 [ 0.102766] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 07:55:22.441743 [ 0.103745] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 07:55:22.441807 [ 0.104281] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 07:55:22.453743 [ 0.104293] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 07:55:22.453807 [ 0.104828] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 07:55:22.465742 [ 0.104859] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 07:55:22.465812 [ 0.105040] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 07:55:22.477742 [ 0.105395] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 07:55:22.477801 [ 0.105405] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 07:55:22.489729 [ 0.105798] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 07:55:22.489790 [ 0.106085] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 07:55:22.501770 [ 0.106094] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 07:55:22.501833 [ 0.106369] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 07:55:22.513748 [ 0.106471] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 07:55:22.513809 [ 0.106480] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 07:55:22.513858 [ 0.106681] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 07:55:22.525736 [ 0.106877] pps_core: LinuxPPS API ver. 1 registered Oct 3 07:55:22.525796 [ 0.106883] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 07:55:22.537759 [ 0.106899] PTP clock support registered Oct 3 07:55:22.537817 [ 0.108549] NetLabel: Initializing Oct 3 07:55:22.549813 [ 0.108556] NetLabel: domain hash size = 128 Oct 3 07:55:22.549904 [ 0.108561] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 07:55:22.561755 [ 0.108616] NetLabel: unlabeled traffic allowed by default Oct 3 07:55:22.561818 [ 0.108796] vgaarb: loaded Oct 3 07:55:22.561864 [ 0.109443] clocksource: Switched to clocksource mct-frc Oct 3 07:55:22.573729 [ 0.177887] VFS: Disk quotas dquot_6.6.0 Oct 3 07:55:22.573789 [ 0.177979] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 07:55:22.585748 [ 0.178715] AppArmor: AppArmor Filesystem Enabled Oct 3 07:55:22.585809 [ 0.187823] NET: Registered PF_INET protocol family Oct 3 07:55:22.585858 [ 0.188032] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 07:55:22.597773 [ 0.189662] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 07:55:22.609641 [ 0.189755] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 07:55:22.609678 [ 0.189778] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 07:55:22.621768 [ 0.189872] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 07:55:22.633738 [ 0.190102] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 07:55:22.633802 [ 0.190321] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 07:55:22.645644 [ 0.190405] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 07:55:22.645678 [ 0.190444] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 07:55:22.657738 [ 0.190644] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 07:55:22.657801 [ 0.190678] NET: Registered PF_XDP protocol family Oct 3 07:55:22.669834 [ 0.190687] PCI: CLS 0 bytes, default 64 Oct 3 07:55:22.669912 [ 0.191219] Trying to unpack rootfs image as initramfs... Oct 3 07:55:22.669961 [ 0.191621] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 07:55:22.681826 [ 0.191854] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 07:55:22.693653 [ 0.193429] Initialise system trusted keyrings Oct 3 07:55:22.693716 [ 0.193536] Key type blacklist registered Oct 3 07:55:22.693743 [ 0.193770] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 07:55:22.705646 [ 0.200925] zbud: loaded Oct 3 07:55:22.705677 [ 0.202154] integrity: Platform Keyring initialized Oct 3 07:55:22.717749 [ 0.202183] integrity: Machine keyring initialized Oct 3 07:55:22.717809 [ 0.202191] Key type asymmetric registered Oct 3 07:55:22.717855 [ 0.202200] Asymmetric key parser 'x509' registered Oct 3 07:55:22.729737 [ 1.556420] Freeing initrd memory: 25724K Oct 3 07:55:22.729795 [ 1.567811] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 07:55:22.741727 [ 1.568095] bounce: pool size: 64 pages Oct 3 07:55:22.741786 [ 1.568257] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 07:55:22.753645 [ 1.568418] io scheduler mq-deadline registered Oct 3 07:55:22.753680 [ 1.573570] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 07:55:22.765647 [ 1.594373] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 07:55:22.765686 [ 1.594384] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 07:55:22.777647 [ 1.596670] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 07:55:22.789643 [ 1.596680] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 07:55:22.789682 [ 1.597556] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 07:55:22.801657 [ 1.597565] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 07:55:22.813644 [ 1.598393] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 07:55:22.813681 [ 1.598403] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 07:55:22.825651 [ 1.600713] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 07:55:22.837652 [ 1.603553] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 07:55:22.837686 [ 1.606329] Serial: AMBA driver Oct 3 07:55:22.849643 [ 1.606574] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 07:55:22.849682 [ 1.607068] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 07:55:22.861652 [ 1.607524] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 07:55:22.873644 [ 2.745624] printk: console [ttySAC2] enabled Oct 3 07:55:22.873676 [ 2.750440] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 07:55:22.885639 [ 2.761101] STM32 USART driver initialized Oct 3 07:55:22.885671 [ 2.775187] mousedev: PS/2 mouse device common for all mice Oct 3 07:55:22.909589 [ 2.806495] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 07:55:22.933602 [ 2.815123] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T07:55:24 UTC (1727942124) Oct 3 07:55:22.945633 [ 2.824970] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 07:55:22.957754 [ 2.832407] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 07:55:22.969689 [ 2.840391] NET: Registered PF_INET6 protocol family Oct 3 07:55:22.969751 [ 2.854044] Segment Routing with IPv6 Oct 3 07:55:22.981718 [ 2.856280] In-situ OAM (IOAM) with IPv6 Oct 3 07:55:22.981776 [ 2.860249] mip6: Mobile IPv6 Oct 3 07:55:22.993731 [ 2.863153] NET: Registered PF_PACKET protocol family Oct 3 07:55:22.993793 [ 2.868401] mpls_gso: MPLS GSO support Oct 3 07:55:22.993833 [ 2.872508] ThumbEE CPU extension supported. Oct 3 07:55:23.005643 [ 2.876142] Registering SWP/SWPB emulation handler Oct 3 07:55:23.005676 [ 2.881407] registered taskstats version 1 Oct 3 07:55:23.017605 [ 2.885023] Loading compiled-in X.509 certificates Oct 3 07:55:23.017653 [ 3.345337] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 07:55:23.485811 [ 3.352691] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 07:55:23.485902 [ 3.363715] zswap: loaded using pool lzo/zbud Oct 3 07:55:23.497776 [ 3.367725] Key type .fscrypt registered Oct 3 07:55:23.497844 [ 3.371014] Key type fscrypt-provisioning registered Oct 3 07:55:23.497892 [ 3.384664] Key type encrypted registered Oct 3 07:55:23.509714 [ 3.387265] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 07:55:23.521783 [ 3.392761] ima: No TPM chip found, activating TPM-bypass! Oct 3 07:55:23.521849 [ 3.398185] ima: Allocated hash algorithm: sha256 Oct 3 07:55:23.533730 [ 3.402983] ima: No architecture policies found Oct 3 07:55:23.533791 [ 3.407418] evm: Initialising EVM extended attributes: Oct 3 07:55:23.545746 [ 3.412489] evm: security.selinux Oct 3 07:55:23.545806 [ 3.415778] evm: security.SMACK64 (disabled) Oct 3 07:55:23.545853 [ 3.420029] evm: security.SMACK64EXEC (disabled) Oct 3 07:55:23.557763 [ 3.424627] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 07:55:23.557831 [ 3.429662] evm: security.SMACK64MMAP (disabled) Oct 3 07:55:23.557879 [ 3.434262] evm: security.apparmor Oct 3 07:55:23.569727 [ 3.437647] evm: security.ima Oct 3 07:55:23.569785 [ 3.440586] evm: security.capability Oct 3 07:55:23.569830 [ 3.444158] evm: HMAC attrs: 0x1 Oct 3 07:55:23.569874 [ 4.032062] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 07:55:24.169642 [ 4.038093] clk: Disabling unused clocks Oct 3 07:55:24.169695 [ 4.051694] Freeing unused kernel image (initmem) memory: 2048K Oct 3 07:55:24.181637 [ 4.056558] Checked W+X mappings: passed, no W+X pages found Oct 3 07:55:24.193617 [ 4.061823] Run /init as init process Oct 3 07:55:24.193654 [ 4.619740] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 07:55:24.757751 [ 4.663894] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 07:55:24.793837 [ 4.684238] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 07:55:24.817782 [ 4.693935] usbcore: registered new interface driver usbfs Oct 3 07:55:24.829714 [ 4.698091] usbcore: registered new interface driver hub Oct 3 07:55:24.829777 [ 4.713517] usbcore: registered new device driver usb Oct 3 07:55:24.841735 [ 4.718626] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 07:55:24.853729 [ 4.745210] phy phy-12130000.phy.1: phy_power_on was called before phy_init Oct 3 07:55:24.877721 [ 4.763044] phy phy-12130000.phy.1: phy_power_on was called before phy_init Oct 3 07:55:24.901725 [ 4.774136] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 07:55:24.901789 [ 4.782784] exynos-ohci 12120000.usb: USB Host Controller Oct 3 07:55:24.913713 [ 4.795164] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Oct 3 07:55:24.925756 [ 4.801512] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Oct 3 07:55:24.937751 [ 4.810775] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Oct 3 07:55:24.937812 [ 4.815522] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Oct 3 07:55:24.949721 [ 4.827662] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 07:55:24.961688 [ 4.849061] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 07:55:24.985681 [ 4.883614] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 07:55:25.021764 [ 4.890479] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 07:55:25.021834 [ 4.897682] usb usb1: Product: EHCI Host Controller Oct 3 07:55:25.033732 [ 4.902532] usb usb1: Manufacturer: Linux 6.1.0-25-armmp ehci_hcd Oct 3 07:55:25.033837 [ 4.908605] usb usb1: SerialNumber: 12110000.usb Oct 3 07:55:25.045715 [ 4.916270] hub 1-0:1.0: USB hub found Oct 3 07:55:25.045773 [ 4.919009] hub 1-0:1.0: 3 ports detected Oct 3 07:55:25.045819 [ 4.927124] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 07:55:25.057756 [ 4.933994] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 07:55:25.069769 [ 4.941149] usb usb2: Product: USB Host Controller Oct 3 07:55:25.069829 [ 4.945923] usb usb2: Manufacturer: Linux 6.1.0-25-armmp ohci_hcd Oct 3 07:55:25.081768 [ 4.951994] usb usb2: SerialNumber: 12120000.usb Oct 3 07:55:25.081828 [ 4.956972] usb3503 usb-hub: switched to HUB mode Oct 3 07:55:25.093712 [ 4.961300] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 07:55:25.093774 [ 4.978958] hub 2-0:1.0: USB hub found Oct 3 07:55:25.105727 [ 4.983250] hub 2-0:1.0: 3 ports detected Oct 3 07:55:25.117671 [ 5.257497] usb 1-3: new high-speed USB device number 2 using exynos-ehci Oct 3 07:55:25.393814 [ 5.264862] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 07:55:25.393897 [ 5.269763] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 07:55:25.405772 [ 5.277034] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 07:55:25.417760 [ 5.285949] xhci-hcd xhci-hcd.2.auto: irq 108, io mem 0x12000000 Oct 3 07:55:25.417824 [ 5.292085] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 07:55:25.429769 [ 5.297372] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 07:55:25.429840 [ 5.305011] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 07:55:25.441737 [ 5.311670] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 07:55:25.441807 [ 5.319762] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 07:55:25.453780 [ 5.326962] usb usb3: Product: xHCI Host Controller Oct 3 07:55:25.453839 [ 5.331828] usb usb3: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 07:55:25.465743 [ 5.337903] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 07:55:25.465803 [ 5.343997] hub 3-0:1.0: USB hub found Oct 3 07:55:25.477745 [ 5.346530] hub 3-0:1.0: 1 port detected Oct 3 07:55:25.477803 [ 5.351416] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 07:55:25.489772 [ 5.358605] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 07:55:25.489842 [ 5.366729] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 07:55:25.501747 [ 5.373933] usb usb4: Product: xHCI Host Controller Oct 3 07:55:25.501811 [ 5.378783] usb usb4: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 07:55:25.513690 [ 5.384857] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 07:55:25.513743 [ 5.390849] hub 4-0:1.0: USB hub found Oct 3 07:55:25.525660 [ 5.393497] hub 4-0:1.0: 1 port detected Oct 3 07:55:25.525712 [ 5.429837] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Oct 3 07:55:25.561788 [ 5.436578] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 3 07:55:25.573739 [ 5.445840] hub 1-3:1.0: USB hub found Oct 3 07:55:25.573798 [ 5.448210] hub 1-3:1.0: 3 ports detected Oct 3 07:55:25.573844 Starting system log daemon: syslogd, klogd. Oct 3 07:55:25.720945 /var/run/utmp: No such file or directory Oct 3 07:55:27.557808 [?1h=(B   Oct 3 07:55:27.605788  Oct 3 07:55:27.617747 [  (-*) ][ Oct 03  7:55 ] Oct 3 07:55:27.629812 [  (0*start) ][ Oct 03  7:55 ] Oct 3 07:55:27.641775 [  (0*start) ][ Oct 03  7:55 ] Oct 3 07:55:27.653842 [  (0*start) ][ Oct 03  7:55 ] Oct 3 07:55:27.665813 [  (0*start) ][ Oct 03  7:55 ]                        [  (0*start) ][ Oct 03  7:55 ][  (0*start) ][ Oct 03  7:55 ] Oct 3 07:55:27.725769 [ 0- start  (2*shell) ][ Oct 03  7:55 ] Oct 3 07:55:27.737779 [ 0- start  (2*shell) ][ Oct 03  7:55 ] Oct 3 07:55:27.749715 [ 0- start  (2*shell) ][ Oct 03  7:55 ] Oct 3 07:55:27.773744 [ 0- start  (2*shell) ][ Oct 03  7:55 ]                        [ 0- start  (2*shell) ][ Oct 03  7:55 ][ 0- start  (2*shell) ][ Oct 03  7:55 ] Oct 3 07:55:27.821756 [ 0 start 2- shell  (3*shell) ][ Oct 03  7:55 ] Oct 3 07:55:27.833716 [ 0 start 2- shell  (3*shell) ][ Oct 03  7:55 ] Oct 3 07:55:27.857738 [ 0 start 2- shell  (3*shell) ][ Oct 03  7:55 ] Oct 3 07:55:27.869737 [ 0 start 2- shell  (3*shell) ][ Oct 03  7:55 ]                        [ 0 start 2- shell  (3*shell) ][ Oct 03  7:55 ][ 0 start 2- shell  (3*shell) ][ Oct 03  7:55 ] Oct 3 07:55:27.917651 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  7:55 ] Oct 3 07:55:27.941748 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  7:55 ] Oct 3 07:55:27.953741 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  7:55 ] Oct 3 07:55:27.965770 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  7:55 ]                        [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  7:55 ][ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  7:55 ] Oct 3 07:55:28.025721 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  7:55 ] Oct 3 07:55:28.037638 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  7:55 ] Oct 3 07:55:28.049622 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  7:55 ] Oct 3 07:55:28.061628 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  7:55 ]                        [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  7:55 ][ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  7:55 ] Oct 3 07:55:28.121639 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  7:55 ] Oct 3 07:55:28.133662 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  7:55 ] Oct 3 07:55:28.145666 [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  7:55 ] Oct 3 07:55:28.604832 Detecting network hardware ... 2%... 95%... 100% Oct 3 07:55:30.341720 Detecting link on eth0; please wait... ... 0%... 10%... 20% Oct 3 07:55:35.229730 Waiting for link-local address... ... 8%... 16%... 25%... 33%... 41%... 50%... 100% Oct 3 07:55:36.777704 Attempting IPv6 autoconfiguration... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 75%... 83%... 91%... 100% Oct 3 07:55:42.848824 Configuring the network with DHCP ... 0%... 100% Oct 3 07:55:46.000808 Checking the Debian archive mirror ... 25%... 50%... 75%... 100% Oct 3 07:55:54.056786 Loading additional components ... 0%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  7:56 ]... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Oct 3 07:56:27.201708 Setting up the clock ... 0%... 100% Oct 3 07:56:29.961687 Loading additional components ... 50%... 100% Oct 3 07:56:31.625626 Detecting disks and all other hardware ... 2%... 95%... 100% Oct 3 07:56:36.245698 Loading additional components ... 12%... 25%... 37%... 50%... 62%... 75%... 87%... 100% Oct 3 07:56:43.292849 Loading additional components ... 25%... 50%... 75%... 100% Oct 3 07:56:45.677711 Starting up the partitioner ... 4%... 13%... 21%... 30%... 43%... 52%... 60%... 73%... 82%... 91%... 100% Oct 3 07:56:58.985736 [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  7:57 ] Guided partitioning ... 16%... 33%... 50%... 66%... 83%... 100% Oct 3 07:57:07.225802 Starting up the partitioner ... 4%... 12%... 20%... 32%... 40%... 52%... 60%... 72%... 80%... 92%... 100% Oct 3 07:57:18.425536 Partitions formatting ... 33% Oct 3 07:57:27.189588 Partitions formatting Partitions formatting Installing the base system ... 0%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  7:58 ]... 17%... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  7:59 ]... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  8:00 ]... 48%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  8:01 ]... 50%...  Oct 3 08:01:26.081795  60%... 70%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  8:02 ]... 79%... 83%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  8:03 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  8:04 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  8:05 ]... 91%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  8:06 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  8:07 ]... 100% Oct 3 08:07:07.484820 Configuring apt ... 7%... 14%... 14%... 21%... 35%... 42%... 50%... 61%... 71%. Oct 3 08:07:44.621878 ... 82%... 92%... 100% Oct 3 08:07:47.261715 Select and install software ... 1%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  8:08 ]... 10%... 13%... 20%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  8:09 ]... 30%... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  8:10 ]... 50%... Oct 3 08:10:38.141721 . 60%... 70%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  8:11 ]... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  8:12 ]... 88%... 90%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  8:13 ]... 94%... 100% Oct 3 08:13:54.185719 Finishing the installation ... 4%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  8:14 ]... 12%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  8:15 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  8:16 ]... 16%... 20%... 32%... 40%... 44%... Oct 3 08:16:05.925748  52%... 60%... 72%... 80%... 92% The system is going down NOW! Oct 3 08:16:15.897742 Sent SIGTERM to all proces Sent SIGKILL to all processes Oct 3 08:16:16.893798 Requesting system reboot Oct 3 08:16:16.893859 [ 1257.802579] reboot: Re˙ Oct 3 08:16:18.249729 Oct 3 08:16:18.249789 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 08:16:18.261771 Oct 3 08:16:18.261823 CPU: Exynos5250@1000MHz Oct 3 08:16:18.261867 Oct 3 08:16:18.261905 Board: Arndale Oct 3 08:16:18.261945 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 08:16:18.261992 ready Oct 3 08:16:18.262029 DRAM: 2 GiB Oct 3 08:16:18.273717 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 08:16:18.285747 trace: enabled Oct 3 08:16:18.321718 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 08:16:18.681727 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 08:16:18.741773 In: serial Oct 3 08:16:18.741828 Out: serial Oct 3 08:16:18.741869 Err: serial Oct 3 08:16:18.741908 SCSI: ARNDALE SCSI INIT Oct 3 08:16:18.753755 Target spinup took 0 ms. Oct 3 08:16:18.753812 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 08:16:18.753861 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 08:16:18.765711 Net: Net Initialization Skipped Oct 3 08:16:18.765711 No ethernet found. Oct 3 08:16:18.765711 Hostname: arndale-westfield Oct 3 08:16:18.765711 Hit any key to stop autoboot: 2  1  0 Oct 3 08:16:20.697752 (Re)start USB... Oct 3 08:16:20.697817 USB0: USB EHCI 1.00 Oct 3 08:16:20.697860 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 08:16:26.301867 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 08:16:26.301981 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 08:16:26.745752 Waiting for Ethernet connection... done. Oct 3 08:16:28.389703 BOOTP broadcast 1 Oct 3 08:16:28.401663 EHCI timed out on TD - token=0x8008d80 Oct 3 08:16:33.201739 BOOTP broadcast 2 Oct 3 08:16:33.201810 DHCP client bound to address 10.149.64.45 (5006 ms) Oct 3 08:16:33.201861 Using asx0 device Oct 3 08:16:33.201903 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 08:16:33.213691 Filename 'pxelinux.0'. Oct 3 08:16:33.213740 Load address: 0x43e00000 Oct 3 08:16:33.213784 Loading: *### Oct 3 08:16:33.225648 2.2 MiB/s Oct 3 08:16:33.225697 done Oct 3 08:16:33.225738 Bytes transferred = 42430 (a5be hex) Oct 3 08:16:33.237709 missing environment variable: pxeuuid Oct 3 08:16:33.237762 Retrieving file: pxelinux.cfg/0A95402D Oct 3 08:16:33.237809 Using asx0 device Oct 3 08:16:33.237851 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 08:16:33.249710 Filename 'pxelinux.cfg/0A95402D'. Oct 3 08:16:33.249742 Load address: 0x51000000 Oct 3 08:16:33.249766 Loading: *# Oct 3 08:16:33.261713 20.5 KiB/s Oct 3 08:16:33.261743 done Oct 3 08:16:33.261766 Bytes transferred = 65 (41 hex) Oct 3 08:16:33.261790 Config file found Oct 3 08:16:33.261812 Ignoring unknown command: serial Oct 3 08:16:33.261836 1: local Oct 3 08:16:33.261857 scanning bus for devices... Oct 3 08:16:33.273642 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 08:16:33.297711 Type: Hard Disk Oct 3 08:16:33.297742 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 08:16:33.297770 Found 1 device(s). Oct 3 08:16:33.297793 Oct 3 08:16:33.309711 SCSI device 0: Oct 3 08:16:33.309742 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 08:16:33.309770 Type: Hard Disk Oct 3 08:16:33.309794 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 08:16:33.321694 ... is now current device Oct 3 08:16:33.321726 Scanning scsi 0... Oct 3 08:16:33.321750 Found U-Boot script /boot.scr Oct 3 08:16:33.441657 639 bytes read in 44 ms (13.7 KiB/s) Oct 3 08:16:33.489703 ## Executing script at 50000000 Oct 3 08:16:33.489760 Loading dtbs/exynos5250-arndale.dtb Oct 3 08:16:33.489806 46686 bytes read in 1846 ms (24.4 KiB/s) Oct 3 08:16:35.289771 Loading vmlinuz-6.1.0-25-armmp-lpae Oct 3 08:16:35.289841 5509632 bytes read in 185 ms (28.4 MiB/s) Oct 3 08:16:35.493627 Loading initrd.img-6.1.0-25-armmp-lpae Oct 3 08:16:35.493660 25732263 bytes read in 1971 ms (12.5 MiB/s) Oct 3 08:16:37.401703 Booting Oct 3 08:16:37.401741 Kernel image @ 0x42000000 [ 0x000000 - 0x541200 ] Oct 3 08:16:37.413714 ## Flattened Device Tree blob at 43000000 Oct 3 08:16:37.413746 Booting using the fdt blob at 0x43000000 Oct 3 08:16:37.413771 Loading Ramdisk to 4e775000, end 4ffff4a7 ... OK Oct 3 08:16:37.833670 Loading Device Tree to 4e766000, end 4e77465d ... OK Oct 3 08:16:37.833704 Oct 3 08:16:37.845659 Starting kernel ...(fake run for tracing) Oct 3 08:16:37.845692 Oct 3 08:16:37.845713 Oct 3 08:16:37.845734 Starting kernel ... Oct 3 08:16:37.857646 Oct 3 08:16:37.857692 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 08:16:43.993717 [ 0.000000] Linux version 6.1.0-25-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.106-3 (2024-08-26) Oct 3 08:16:44.005718 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=30c5387d Oct 3 08:16:44.017714 [ 0.000000] CPU: div instructions available: patching division code Oct 3 08:16:44.017749 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 08:16:44.029711 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 08:16:44.029749 [ 0.000000] Memory policy: Data cache writealloc Oct 3 08:16:44.041723 [ 0.000000] efi: UEFI not found. Oct 3 08:16:44.041783 [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000 Oct 3 08:16:44.041832 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 08:16:44.053714 [ 0.000000] Zone ranges: Oct 3 08:16:44.053767 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 08:16:44.065709 [ 0.000000] Normal empty Oct 3 08:16:44.065759 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 08:16:44.065808 [ 0.000000] Movable zone start for each node Oct 3 08:16:44.077727 [ 0.000000] Early memory node ranges Oct 3 08:16:44.077773 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 08:16:44.077857 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 08:16:44.089713 [ 0.000000] percpu: Embedded 18 pages/cpu s44820 r8192 d20716 u73728 Oct 3 08:16:44.101764 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 08:16:44.101830 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=ttySAC2,115200n8 Oct 3 08:16:44.113723 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 08:16:44.125718 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 08:16:44.125784 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 08:16:44.137753 [ 0.000000] Memory: 2015504K/2097152K available (12288K kernel code, 1717K rwdata, 3748K rodata, 2048K init, 383K bss, 65264K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 08:16:44.149736 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 08:16:44.161737 [ 0.000000] ftrace: allocating 39996 entries in 118 pages Oct 3 08:16:44.161771 [ 0.000000] ftrace: allocated 118 pages with 5 groups Oct 3 08:16:44.173726 [ 0.000000] trace event string verifier disabled Oct 3 08:16:44.173778 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 08:16:44.173826 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 08:16:44.185699 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 08:16:44.185732 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 08:16:44.197722 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 08:16:44.197813 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 08:16:44.209713 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 08:16:44.209776 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 08:16:44.221714 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 08:16:44.221749 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 08:16:44.233714 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 08:16:44.233749 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 08:16:44.245718 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 08:16:44.257707 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 08:16:44.257744 [ 0.002614] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 08:16:44.269713 [ 0.002628] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 08:16:44.281724 [ 0.002643] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 08:16:44.281766 [ 0.002655] Ignoring duplicate/late registration of read_current_timer delay Oct 3 08:16:44.293726 [ 0.003022] Console: colour dummy device 80x30 Oct 3 08:16:44.293759 [ 0.003063] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 08:16:44.305724 [ 0.003076] CPU: Testing write buffer coherency: ok Oct 3 08:16:44.317706 [ 0.003118] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 08:16:44.317747 [ 0.003126] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 08:16:44.329717 [ 0.003132] pid_max: default: 32768 minimum: 301 Oct 3 08:16:44.329750 [ 0.003500] LSM: Security Framework initializing Oct 3 08:16:44.341719 [ 0.003573] landlock: Up and running. Oct 3 08:16:44.341751 [ 0.003578] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 08:16:44.353737 [ 0.003767] AppArmor: AppArmor initialized Oct 3 08:16:44.353770 [ 0.003780] TOMOYO Linux initialized Oct 3 08:16:44.353795 [ 0.003823] LSM support for eBPF active Oct 3 08:16:44.353819 [ 0.004070] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 08:16:44.365745 [ 0.004083] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 08:16:44.377712 [ 0.005498] /cpus/cpu@0 missing clock-frequency property Oct 3 08:16:44.377746 [ 0.005526] /cpus/cpu@1 missing clock-frequency property Oct 3 08:16:44.389716 [ 0.005540] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 08:16:44.389750 [ 0.006496] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 08:16:44.401719 [ 0.006502] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 08:16:44.401753 [ 0.006605] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 08:16:44.413714 [ 0.006610] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 08:16:44.413748 [ 0.006750] Setting up static identity map for 0x40400000 - 0x404000ac Oct 3 08:16:44.425721 [ 0.007911] rcu: Hierarchical SRCU implementation. Oct 3 08:16:44.425755 [ 0.007917] rcu: Max phase no-delay instances is 1000. Oct 3 08:16:44.437725 [ 0.010042] EFI services will not be available. Oct 3 08:16:44.437758 [ 0.010385] smp: Bringing up secondary CPUs ... Oct 3 08:16:44.437785 [ 0.011127] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 08:16:44.449706 [ 0.011139] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 08:16:44.461730 [ 0.011269] smp: Brought up 1 node, 2 CPUs Oct 3 08:16:44.461763 [ 0.011277] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 08:16:44.473750 [ 0.011285] CPU: All CPU(s) started in HYP mode. Oct 3 08:16:44.473786 [ 0.011289] CPU: Virtualization extensions available. Oct 3 08:16:44.473813 [ 0.012156] devtmpfs: initialized Oct 3 08:16:44.485705 [ 0.023157] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 08:16:44.485767 [ 0.023385] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 08:16:44.497721 [ 0.023410] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 08:16:44.509708 [ 0.023948] pinctrl core: initialized pinctrl subsystem Oct 3 08:16:44.509762 [ 0.024706] DMI not present or invalid. Oct 3 08:16:44.509808 [ 0.025383] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 08:16:44.521714 [ 0.026924] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 08:16:44.521774 [ 0.028440] audit: initializing netlink subsys (disabled) Oct 3 08:16:44.533716 [ 0.028643] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 Oct 3 08:16:44.545725 [ 0.029825] thermal_sys: Registered thermal governor 'fair_share' Oct 3 08:16:44.545785 [ 0.029833] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 08:16:44.557708 [ 0.029837] thermal_sys: Registered thermal governor 'step_wise' Oct 3 08:16:44.557743 [ 0.029842] thermal_sys: Registered thermal governor 'user_space' Oct 3 08:16:44.569711 [ 0.029846] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 08:16:44.569768 [ 0.030048] No ATAGs? Oct 3 08:16:44.569812 [ 0.030114] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 08:16:44.581729 [ 0.030123] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 08:16:44.581795 [ 0.031208] Serial: AMBA PL011 UART driver Oct 3 08:16:44.593710 [ 0.080623] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 08:16:44.593773 [ 0.087560] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 08:16:44.605724 [ 0.091835] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages Oct 3 08:16:44.617727 [ 0.091843] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page Oct 3 08:16:44.617762 [ 0.099046] iommu: Default domain type: Translated Oct 3 08:16:44.629713 [ 0.099054] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 08:16:44.629773 [ 0.100028] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 08:16:44.641723 [ 0.100540] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 08:16:44.641757 [ 0.100551] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 08:16:44.653721 [ 0.101087] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 08:16:44.653761 [ 0.101118] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 08:16:44.665723 [ 0.101343] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 08:16:44.665757 [ 0.101830] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 08:16:44.677716 [ 0.101841] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 08:16:44.677750 [ 0.102221] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 08:16:44.689708 [ 0.102512] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 08:16:44.689741 [ 0.102522] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 08:16:44.701717 [ 0.102836] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 08:16:44.701751 [ 0.102936] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 08:16:44.713720 [ 0.102945] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 08:16:44.713754 [ 0.103152] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 08:16:44.713781 [ 0.103373] pps_core: LinuxPPS API ver. 1 registered Oct 3 08:16:44.725714 [ 0.103378] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 08:16:44.737721 [ 0.103395] PTP clock support registered Oct 3 08:16:44.737754 [ 0.104928] NetLabel: Initializing Oct 3 08:16:44.737779 [ 0.104934] NetLabel: domain hash size = 128 Oct 3 08:16:44.749708 [ 0.104939] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 08:16:44.749743 [ 0.104993] NetLabel: unlabeled traffic allowed by default Oct 3 08:16:44.761713 [ 0.105165] vgaarb: loaded Oct 3 08:16:44.761745 [ 0.105687] clocksource: Switched to clocksource mct-frc Oct 3 08:16:44.761772 [ 0.106247] VFS: Disk quotas dquot_6.6.0 Oct 3 08:16:44.773708 [ 0.106333] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 08:16:44.773745 [ 0.107105] AppArmor: AppArmor Filesystem Enabled Oct 3 08:16:44.773771 [ 0.116974] NET: Registered PF_INET protocol family Oct 3 08:16:44.785718 [ 0.117176] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 08:16:44.785756 [ 0.118815] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 08:16:44.797724 [ 0.118915] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 08:16:44.809724 [ 0.118940] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 08:16:44.809762 [ 0.119039] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 08:16:44.821723 [ 0.119269] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 08:16:44.833712 [ 0.119505] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 08:16:44.833771 [ 0.119597] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 08:16:44.845738 [ 0.119638] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 08:16:44.845803 [ 0.119867] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 08:16:44.857711 [ 0.119904] NET: Registered PF_XDP protocol family Oct 3 08:16:44.857769 [ 0.119917] PCI: CLS 0 bytes, default 64 Oct 3 08:16:44.869713 [ 0.120400] Trying to unpack rootfs image as initramfs... Oct 3 08:16:44.869772 [ 0.120753] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 08:16:44.881719 [ 0.126121] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 08:16:44.881757 [ 0.193190] Initialise system trusted keyrings Oct 3 08:16:44.893714 [ 0.193310] Key type blacklist registered Oct 3 08:16:44.893746 [ 0.194569] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 08:16:44.905714 [ 0.202481] zbud: loaded Oct 3 08:16:44.905766 [ 0.203762] integrity: Platform Keyring initialized Oct 3 08:16:44.905815 [ 0.203806] integrity: Machine keyring initialized Oct 3 08:16:44.917730 [ 0.203814] Key type asymmetric registered Oct 3 08:16:44.917783 [ 0.203821] Asymmetric key parser 'x509' registered Oct 3 08:16:44.917831 [ 1.417542] Freeing initrd memory: 25132K Oct 3 08:16:44.929691 [ 1.439542] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 08:16:44.929726 [ 1.439808] bounce: pool size: 64 pages Oct 3 08:16:44.929751 [ 1.439986] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 08:16:44.941742 [ 1.440153] io scheduler mq-deadline registered Oct 3 08:16:44.941788 [ 1.445274] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 08:16:44.953756 [ 1.466292] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 08:16:44.965718 [ 1.466304] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 08:16:44.977713 [ 1.468599] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 08:16:44.977779 [ 1.468609] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 08:16:44.989700 [ 1.469396] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 08:16:45.001713 [ 1.469405] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 08:16:45.001801 [ 1.470252] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 08:16:45.013754 [ 1.470262] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 08:16:45.025720 [ 1.472582] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 08:16:45.025760 [ 1.475435] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 08:16:45.037717 [ 1.478207] Serial: AMBA driver Oct 3 08:16:45.037774 [ 1.478433] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 08:16:45.049716 [ 1.478904] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 08:16:45.061716 [ 1.479390] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 08:16:45.061755 [ 2.560118] printk: console [ttySAC2] enabled Oct 3 08:16:45.073745 [ 2.564929] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 08:16:45.085795 [ 2.575605] STM32 USART driver initialized Oct 3 08:16:45.085828 [ 2.590086] mousedev: PS/2 mouse device common for all mice Oct 3 08:16:45.097711 [ 2.621313] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 08:16:45.133697 [ 2.629953] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T08:16:45 UTC (1727943405) Oct 3 08:16:45.145705 [ 2.639801] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 08:16:45.157697 [ 2.647278] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 08:16:45.157732 [ 2.655255] NET: Registered PF_INET6 protocol family Oct 3 08:16:45.169652 [ 2.679501] Segment Routing with IPv6 Oct 3 08:16:45.193709 [ 2.681785] In-situ OAM (IOAM) with IPv6 Oct 3 08:16:45.193742 [ 2.685732] mip6: Mobile IPv6 Oct 3 08:16:45.193766 [ 2.688566] NET: Registered PF_PACKET protocol family Oct 3 08:16:45.205712 [ 2.693813] mpls_gso: MPLS GSO support Oct 3 08:16:45.205745 [ 2.697774] ThumbEE CPU extension supported. Oct 3 08:16:45.205771 [ 2.701581] Registering SWP/SWPB emulation handler Oct 3 08:16:45.217702 [ 2.706909] registered taskstats version 1 Oct 3 08:16:45.217735 [ 2.710475] Loading compiled-in X.509 certificates Oct 3 08:16:45.217761 [ 3.170646] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 08:16:45.685735 [ 3.177984] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 08:16:45.697711 [ 3.189067] zswap: loaded using pool lzo/zbud Oct 3 08:16:45.697773 [ 3.192956] Key type .fscrypt registered Oct 3 08:16:45.697819 [ 3.196321] Key type fscrypt-provisioning registered Oct 3 08:16:45.709675 [ 3.220507] Key type encrypted registered Oct 3 08:16:45.733711 [ 3.223102] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 08:16:45.733765 [ 3.228555] ima: No TPM chip found, activating TPM-bypass! Oct 3 08:16:45.745719 [ 3.234024] ima: Allocated hash algorithm: sha256 Oct 3 08:16:45.745773 [ 3.238742] ima: No architecture policies found Oct 3 08:16:45.745821 [ 3.243274] evm: Initialising EVM extended attributes: Oct 3 08:16:45.757716 [ 3.248324] evm: security.selinux Oct 3 08:16:45.757770 [ 3.251614] evm: security.SMACK64 (disabled) Oct 3 08:16:45.757817 [ 3.255865] evm: security.SMACK64EXEC (disabled) Oct 3 08:16:45.769710 [ 3.260465] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 08:16:45.769772 [ 3.265498] evm: security.SMACK64MMAP (disabled) Oct 3 08:16:45.781711 [ 3.270100] evm: security.apparmor Oct 3 08:16:45.781743 [ 3.273470] evm: security.ima Oct 3 08:16:45.781799 [ 3.276435] evm: security.capability Oct 3 08:16:45.781843 [ 3.280000] evm: HMAC attrs: 0x1 Oct 3 08:16:45.793681 [ 3.867835] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 08:16:46.384674 [ 3.873816] clk: Disabling unused clocks Oct 3 08:16:46.384674 [ 3.886702] Freeing unused kernel image (initmem) memory: 2048K Oct 3 08:16:46.396659 [ 3.891583] Checked W+X mappings: passed, no W+X pages found Oct 3 08:16:46.408663 [ 3.896818] Run /init as init process Oct 3 08:16:46.408663 Loading, please wait... Oct 3 08:16:46.444688 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 08:16:46.520669 [ 4.834773] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 08:16:47.348676 [ 4.848476] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 08:16:47.360713 [ 4.857193] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 08:16:47.372706 [ 4.904319] usbcore: registered new interface driver usbfs Oct 3 08:16:47.420720 [ 4.910656] Synopsys Designware Multimedia Card Interface Driver Oct 3 08:16:47.420720 [ 4.921210] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 08:16:47.432698 [ 4.929632] usbcore: registered new interface driver hub Oct 3 08:16:47.444781 [ 4.929805] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 08:16:47.444908 [ 4.933598] usbcore: registered new device driver usb Oct 3 08:16:47.456813 [ 4.945454] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 08:16:47.456813 [ 4.951824] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 08:16:47.472963 [ 4.961839] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo Oct 3 08:16:47.484651 [ 4.984592] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 08:16:47.496717 [ 4.989635] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 08:16:47.508700 [ 4.995434] mmc_host mmc0: card is polling. Oct 3 08:16:47.508700 [ 5.011416] SCSI subsystem initialized Oct 3 08:16:47.520684 [ 5.021876] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 08:16:47.532736 [ 5.044268] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo Oct 3 08:16:47.556893 [ 5.060233] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 08:16:47.580677 [ 5.073315] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 08:16:47.592687 [ 5.106437] phy phy-12130000.phy.2: phy_power_on was called before phy_init Oct 3 08:16:47.616704 [ 5.132001] phy phy-12130000.phy.2: phy_power_on was called before phy_init Oct 3 08:16:47.652712 [ 5.137561] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 08:16:47.652712 [ 5.147498] exynos-ohci 12120000.usb: USB Host Controller Oct 3 08:16:47.664712 [ 5.156159] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 08:16:47.676717 [ 5.162242] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Oct 3 08:16:47.676717 [ 5.169089] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 08:16:47.688731 [ 5.170377] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Oct 3 08:16:47.700715 [ 5.188795] exynos-ohci 12120000.usb: irq 109, io mem 0x12120000 Oct 3 08:16:47.700715 [ 5.194182] exynos-ehci 12110000.usb: irq 109, io mem 0x12110000 Oct 3 08:16:47.712839 [ 5.203545] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 08:16:47.724730 [ 5.210371] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 08:16:47.724730 [ 5.213740] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 08:16:47.736734 [ 5.225413] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 08:16:47.748731 [ 5.234942] mmc0: new DDR MMC card at address 0001 Oct 3 08:16:47.748731 [ 5.235608] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 08:16:47.760732 [ 5.248150] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 08:16:47.760732 [ 5.255333] usb usb2: Product: EHCI Host Controller Oct 3 08:16:47.772733 [ 5.260190] usb usb2: Manufacturer: Linux 6.1.0-25-armmp-lpae ehci_hcd Oct 3 08:16:47.772733 [ 5.265848] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 08:16:47.784730 [ 5.266694] usb usb2: SerialNumber: 12110000.usb Oct 3 08:16:47.784730 [ 5.273763] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Oct 3 08:16:47.796785 [ 5.279241] hub 2-0:1.0: USB hub found Oct 3 08:16:47.796785 [ 5.287199] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 08:16:47.808730 [ 5.290922] mmc1: new high speed SDHC card at address aaaa Oct 3 08:16:47.820713 [ 5.305537] hub 2-0:1.0: 3 ports detected Oct 3 08:16:47.820713 [ 5.313002] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 08:16:47.832730 [ 5.313912] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Oct 3 08:16:47.832730 [ 5.319863] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 08:16:47.844733 [ 5.331500] usb usb1: Product: USB Host Controller Oct 3 08:16:47.844733 [ 5.336251] usb usb1: Manufacturer: Linux 6.1.0-25-armmp-lpae ohci_hcd Oct 3 08:16:47.856728 [ 5.342750] usb usb1: SerialNumber: 12120000.usb Oct 3 08:16:47.856728 [ 5.348351] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Oct 3 08:16:47.856728 [ 5.368446] mmcblk0: p1 p2 p3 p4 Oct 3 08:16:47.880641 [ 5.379013] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Oct 3 08:16:47.892649 [ 5.396659] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Oct 3 08:16:47.904803 [ 5.414164] scsi host0: ahci-dwc Oct 3 08:16:47.928819 [ 5.417603] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (241:0) Oct 3 08:16:47.928869 [ 5.418223] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 110 Oct 3 08:16:47.940884 [ 5.447066] hub 1-0:1.0: USB hub found Oct 3 08:16:47.964750 [ 5.452497] hub 1-0:1.0: 3 ports detected Oct 3 08:16:47.964812 [ 5.667904] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 08:16:48.180718 [ 5.742109] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 08:16:48.264671 [ 5.850545] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 08:16:48.372795 [ 5.905755] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 08:16:48.420828 [ 5.911373] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 08:16:48.432880 [ 5.917176] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 08:16:48.432945 [ 5.924671] ata1.00: configured for UDMA/133 Oct 3 08:16:48.432993 [ 5.929058] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 08:16:48.444877 [ 5.958664] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 08:16:48.480613 [ 5.989361] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 08:16:48.504720 [ 5.997118] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 08:16:48.516732 [ 6.003893] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 08:16:48.528691 [ 6.012770] xhci-hcd xhci-hcd.2.auto: irq 111, io mem 0x12000000 Oct 3 08:16:48.528691 [ 6.018988] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 08:16:48.528691 [ 6.024167] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 08:16:48.540733 [ 6.031842] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 08:16:48.552728 [ 6.038530] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 08:16:48.552728 [ 6.046594] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 08:16:48.563899 [ 6.053752] usb usb3: Product: xHCI Host Controller Oct 3 08:16:48.563899 [ 6.058615] usb usb3: Manufacturer: Linux 6.1.0-25-armmp-lpae xhci-hcd Oct 3 08:16:48.576739 [ 6.065117] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 08:16:48.576739 [ 6.070041] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 08:16:48.588713 [ 6.070854] hub 3-0:1.0: USB hub found Oct 3 08:16:48.588713 [ 6.083069] hub 3-0:1.0: 1 port detected Oct 3 08:16:48.600719 [ 6.088508] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 08:16:48.600719 [ 6.095329] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 08:16:48.612714 [ 6.103448] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 08:16:48.624733 [ 6.110648] usb usb4: Product: xHCI Host Controller Oct 3 08:16:48.624733 [ 6.115502] usb usb4: Manufacturer: Linux 6.1.0-25-armmp-lpae xhci-hcd Oct 3 08:16:48.636733 [ 6.122003] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 08:16:48.636733 [ 6.127629] hub 4-0:1.0: USB hub found Oct 3 08:16:48.636733 [ 6.130683] hub 4-0:1.0: 1 port detected Oct 3 08:16:48.648699 [ 6.172015] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 08:16:48.684701 [ 6.178107] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 08:16:48.696670 [ 6.183327] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 08:16:48.708710 [ 6.192597] sd 0:0:0:0: [sda] Write Protect is off Oct 3 08:16:48.708710 [ 6.197452] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 08:16:48.720737 [ 6.207234] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 08:16:48.720737 [ 6.233507] sda: sda1 sda2 < sda5 > Oct 3 08:16:48.744839 [ 6.240218] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 08:16:48.756659 [ 6.292674] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 08:16:48.816632 [ 6.400628] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 08:16:48.916690 [ 6.508598] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 08:16:49.024706 [ 6.616580] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 08:16:49.132702 [ 7.025092] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 08:16:49.540691 [ 7.132708] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 08:16:49.648684 [ 7.297712] random: crng init done Oct 3 08:16:49.804664 [ 7.406665] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. Oct 3 08:16:49.924725 [ 7.417521] device-mapper: uevent: version 1.0.3 Oct 3 08:16:49.936723 [ 7.422259] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Oct 3 08:16:49.936723 [ 7.740783] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 08:16:50.260671 Begin: Loading essential drivers ... done. Oct 3 08:16:50.512826 Begin: Running /scripts/init-premount ... done. Oct 3 08:16:53.521858 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 08:16:53.540104 Begin: Running /scripts/local-premount ... done. Oct 3 08:16:53.593696 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 08:16:53.641793 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 08:16:53.749810 /dev/mapper/arndale--westfield--vg-root: clean, 39343/1220608 files, 378269/4882432 blocks Oct 3 08:16:53.953817 done. Oct 3 08:16:53.965738 [ 11.582516] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 08:16:54.097784 [ 11.773744] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 08:16:54.289782 done. Oct 3 08:16:54.289833 Begin: Running /scripts/local-bottom ... done. Oct 3 08:16:54.337832 Begin: Running /scripts/init-bottom ... done. Oct 3 08:16:54.385742 [ 12.091987] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. Oct 3 08:16:54.601814 INIT: version 3.06 booting Oct 3 08:16:54.877747 INIT: No inittab.d directory found Oct 3 08:16:54.961588 Using makefile-style concurrent boot in runlevel S. Oct 3 08:16:55.273740 Starting hotplug events dispatcher: systemd-udevd. Oct 3 08:16:56.821740 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 08:16:57.061725 Synthesizing the initial hotplug events (devices)...done. Oct 3 08:16:57.625787 Waiting for /dev to be fully populated...[ 15.362871] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 08:16:57.877717 [ 15.418074] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Oct 3 08:16:57.937675 [ 15.481959] sd 0:0:0:0: Attached scsi generic sg0 type 0 Oct 3 08:16:57.997692 [ 15.620244] panfrost 11800000.gpu: clock rate = 533000000 Oct 3 08:16:58.129721 [ 15.636780] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 08:16:58.153734 [ 15.652721] panfrost 11800000.gpu: mali-t600 id 0x600 major 0x0 minor 0x0 status 0x1 Oct 3 08:16:58.165770 [ 15.659091] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,31b4dfff Oct 3 08:16:58.177771 [ 15.667176] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 Oct 3 08:16:58.189729 [ 15.678914] panfrost 11800000.gpu: shader_present=0xf l2_present=0x1 Oct 3 08:16:58.189794 [ 15.689980] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 0 Oct 3 08:16:58.201739 [ 15.733860] usb3503 usb-hub: switched to HUB mode Oct 3 08:16:58.249738 [ 15.737126] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 08:16:58.249801 [ 15.745676] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 08:16:58.261727 [ 15.856104] blk_print_req_error: 6 callbacks suppressed Oct 3 08:16:58.369757 [ 15.856138] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 08:16:58.381672 [ 15.976410] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 08:16:58.489738 [ 16.061903] usb 2-3: new high-speed USB device number 2 using exynos-ehci Oct 3 08:16:58.573752 [ 16.084643] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 08:16:58.597752 [ 16.192725] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 08:16:58.705759 [ 16.226305] usb 2-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Oct 3 08:16:58.741780 [ 16.233113] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 3 08:16:58.741846 [ 16.241759] hub 2-3:1.0: USB hub found Oct 3 08:16:58.753732 [ 16.244304] hub 2-3:1.0: 3 ports detected Oct 3 08:16:58.753792 [ 16.300795] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 08:16:58.813764 [ 16.345244] OF: graph: no port node found in /soc/hdmi@14530000 Oct 3 08:16:58.861723 [ 16.409004] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 08:16:58.921757 [ 16.517002] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 08:16:59.029824 [ 16.560831] usb 2-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 08:16:59.077804 [ 16.625071] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 08:16:59.137923 [ 16.683950] usb 2-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=77.32 Oct 3 08:16:59.197777 [ 16.690985] usb 2-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Oct 3 08:16:59.209741 [ 16.698483] usb 2-3.2: Product: USB2.0 Hub Oct 3 08:16:59.209800 [ 16.706422] hub 2-3.2:1.0: USB hub found Oct 3 08:16:59.221704 [ 16.713591] hub 2-3.2:1.0: 4 ports detected Oct 3 08:16:59.221764 [ 17.005880] usb 2-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 08:16:59.521717 [ 17.034705] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 08:16:59.545750 [ 17.123933] usb 2-3.2.4: New USB device found, idVendor=0b95, idProduct=772a, bcdDevice= 0.01 Oct 3 08:16:59.641832 [ 17.131309] usb 2-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Oct 3 08:16:59.641901 [ 17.138675] usb 2-3.2.4: Product: AX88772 Oct 3 08:16:59.653757 [ 17.142813] usb 2-3.2.4: Manufacturer: ASIX Elec. Corp. Oct 3 08:16:59.653820 [ 17.147864] usb 2-3.2.4: SerialNumber: 000001 Oct 3 08:16:59.653867 [ 17.152284] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 08:16:59.665766 [ 17.629337] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 08:17:00.145719 [ 17.764097] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 08:17:00.277732 [ 18.304333] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 08:17:00.817802 [ 18.319881] Asix Electronics AX88772A usb-002:004:10: attached PHY driver (mii_bus:phy_addr=usb-002:004:10, irq=POLL) Oct 3 08:17:00.841769 [ 18.331708] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, ae:87:a2:09:a7:f1 Oct 3 08:17:00.853722 [ 18.342360] usbcore: registered new interface driver asix Oct 3 08:17:00.853784 done. Oct 3 08:17:01.129695 [ 19.100126] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 08:17:01.609809 Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). Oct 3 08:17:01.645725 Checking file systems.../dev/sda1: clean, 922/61056 files, 25402/243968 blocks Oct 3 08:17:03.264828 done. Oct 3 08:17:03.312822 Cleaning up temporary files... /tmp. Oct 3 08:17:03.528801 [ 21.214035] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 08:17:03.732791 [ 21.273230] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 08:17:03.784837 [ 21.471515] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k FS Oct 3 08:17:03.988838 Mounting local filesystems...done. Oct 3 08:17:04.336929 Activating swapfile swap, if any...done. Oct 3 08:17:04.348803 Cleaning up temporary files.... Oct 3 08:17:04.420802 Starting Setting kernel variables: sysctl. Oct 3 08:17:04.648813 [ 22.689901] audit: type=1400 audit(1727943425.636:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=876 comm="apparmor_parser" Oct 3 08:17:05.216915 [ 22.710749] audit: type=1400 audit(1727943425.636:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=876 comm="apparmor_parser" Oct 3 08:17:05.240872 [ 22.726127] audit: type=1400 audit(1727943425.656:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=875 comm="apparmor_parser" Oct 3 08:17:05.252957 [ 23.009985] asix 2-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 08:17:05.528837 [ 23.067546] audit: type=1400 audit(1727943426.012:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=919 comm="apparmor_parser" Oct 3 08:17:05.588828 [ 23.087324] audit: type=1400 audit(1727943426.028:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=919 comm="apparmor_parser" Oct 3 08:17:05.613093 [ 23.100749] audit: type=1400 audit(1727943426.032:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=919 comm="apparmor_parser" Oct 3 08:17:05.625000 [ 23.446841] audit: type=1400 audit(1727943426.392:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=915 comm="apparmor_parser" Oct 3 08:17:05.977033 [ 23.465761] audit: type=1400 audit(1727943426.396:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=915 comm="apparmor_parser" Oct 3 08:17:05.989034 [ 23.481643] audit: type=1400 audit(1727943426.396:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=915 comm="apparmor_parser" Oct 3 08:17:06.012850 [ 23.499205] audit: type=1400 audit(1727943426.412:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=943 comm="apparmor_parser" Oct 3 08:17:06.024963 Starting: AppArmorLoading AppArmor profiles...done. Oct 3 08:17:06.072833 . Oct 3 08:17:06.072833 [ 25.191294] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 08:17:07.709033 [ 25.197475] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 3 08:17:07.709125 Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1 Oct 3 08:17:09.376826 Copyright 2004-2022 Internet Systems Consortium. Oct 3 08:17:09.388862 All rights reserved. Oct 3 08:17:09.388862 For info, please visit https://www.isc.org/software/dhcp/ Oct 3 08:17:09.388862 Oct 3 08:17:09.388862 Listening on LPF/eth0/a6:46:13:77:e8:2f Oct 3 08:17:09.400872 Sending on LPF/eth0/a6:46:13:77:e8:2f Oct 3 08:17:09.400872 Sending on Socket/fallback Oct 3 08:17:09.400872 Created duid "\000\001\000\001.\221\017\202\246F\023w\350/". Oct 3 08:17:09.412810 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 Oct 3 08:17:09.412810 [ 28.385032] exynos4-fb 14400000.fimd: deferred probe timeout, ignoring dependency Oct 3 08:17:10.904998 [ 28.395958] exynos-mixer 14450000.mixer: deferred probe timeout, ignoring dependency Oct 3 08:17:10.916984 [ 28.403770] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations Oct 3 08:17:10.917094 [ 28.410150] exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm]) Oct 3 08:17:10.929124 [ 28.418662] exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm]) Oct 3 08:17:10.940777 [ 28.428221] exynos-drm exynos-drm: bound 14500000.dsi (ops hdmi_enable [exynosdrm]) Oct 3 08:17:10.940777 [ 28.435083] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm]) Oct 3 08:17:10.952958 [ 28.455566] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 08:17:10.964927 [ 28.461349] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 08:17:10.977119 [ 28.468351] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 Oct 3 08:17:10.988791 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 Oct 3 08:17:13.432940 DHCPOFFER of 10.149.64.45 from 10.149.64.4 Oct 3 08:17:13.444860 DHCPREQUEST for 10.149.64.45 on eth0 to 255.255.255.255 port 67 Oct 3 08:17:13.444860 DHCPACK of 10.149.64.45 from 10.149.64.4 Oct 3 08:17:13.444860 bound to 10.149.64.45 -- renewal in 233 seconds. Oct 3 08:17:13.456812 done. Oct 3 08:17:13.456812 Cleaning up temporary files.... Oct 3 08:17:13.480800 Starting nftables: none Oct 3 08:17:13.612730 . Oct 3 08:17:14.032787 INIT: Entering runlevel: 2 Oct 3 08:17:14.092789 Using makefile-style concurrent boot in runlevel 2. Oct 3 08:17:14.140803 Starting Apache httpd web server: apache2. Oct 3 08:17:16.044694 Starting NTP server: ntpd2024-10-03T08:17:16 ntpd[1126]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 08:17:16.452781 2024-10-03T08:17:16 ntpd[1126]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 08:17:16.464674 . Oct 3 08:17:16.464674 Starting periodic command scheduler: cron. Oct 3 08:17:16.564718 Starting system message bus: dbus. Oct 3 08:17:16.648712 Starting OpenBSD Secure Shell server: sshd. Oct 3 08:17:17.556722 Oct 3 08:17:18.652714 Debian GNU/Linux 12 arndale-westfield ttySAC2 Oct 3 08:17:18.652714 Oct 3 08:17:18.652714 arndale-westfield login: INIT: Switching to r INIT: No inittab.d directorUsing makefile-style concurrent boot in runlevel 6. Oct 3 08:22:34.417766 Stopping SMP IRQ Balancer: irqbalance. Oct 3 08:22:34.489721 Stopping hotplug events dispatcher: systemd-udevd. Oct 3 08:22:34.501700 Stopping nftables: none. Oct 3 08:22:34.513674 Saving the system clock to /dev/rtc0. Oct 3 08:22:34.777747 Hardware Clock updated to Thu Oct 3 08:22:35 UTC 2024. Oct 3 08:22:34.777809 Stopping Apache httpd web server: apache2. Oct 3 08:22:35.665782 Asking all remaining processes to terminate...done. Oct 3 08:22:36.025727 All processes ended within 1 seconds...done. Oct 3 08:22:36.025787 Deconfiguring network interfaces...ifdown: ignoring unknown interface eth0=eth0 Oct 3 08:22:36.157675 done. Oct 3 08:22:36.157728 [ 353.811454] EXT4-fs (sda1): unmounting filesystem. Oct 3 08:22:36.325682 Deactivating swap...done. Oct 3 08:22:36.385708 Unmounting local filesystems...done. Oct 3 08:22:36.385767 [ 354.138464] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 08:22:36.649712 Will now restart. Oct 3 08:22:36.949702 [ 354.470776] asix 2-3.2.4:1.0 eth0: Link is Down Oct 3 08:22:36.985640 [ 354.538882] sd 0:0:0:0: [sda] Synchronizing SCSI cache Oct 3 08:22:37.045715 [ 354.546842] wake enabled for irq 101 (gpx1-4) Oct 3 08:22:37.057746 [ 354.549761] wake enabled for irq 102 (gpx1-5) Oct 3 08:22:37.057806 [ 354.554089] wake enabled for irq 103 (gpx1-6) Oct 3 08:22:37.069739 [ 354.558437] wake enabled for irq 104 (gpx1-7) Oct 3 08:22:37.069801 [ 354.562771] wake enabled for irq 105 (gpx2-0) Oct 3 08:22:37.069849 [ 354.567108] wake enabled for irq 106 (gpx2-1) Oct 3 08:22:37.081666 [ 354.571933] reboot: Re˙ Oct 3 08:22:37.417738 Oct 3 08:22:37.417791 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 08:22:37.417843 Oct 3 08:22:37.417882 CPU: Exynos5250@1000MHz Oct 3 08:22:37.417925 Oct 3 08:22:37.417963 Board: Arndale Oct 3 08:22:37.429724 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 08:22:37.429786 ready Oct 3 08:22:37.429827 DRAM: 2 GiB Oct 3 08:22:37.429867 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 08:22:37.453681 trace: enabled Oct 3 08:22:37.489682 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 08:22:37.849698 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 08:22:37.909707 In: serial Oct 3 08:22:37.909762 Out: serial Oct 3 08:22:37.909805 Err: serial Oct 3 08:22:37.909846 SCSI: ARNDALE SCSI INIT Oct 3 08:22:37.909889 Target spinup took 0 ms. Oct 3 08:22:37.921747 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 08:22:37.921810 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 08:22:37.921860 Net: Net Initialization Skipped Oct 3 08:22:37.933737 No ethernet found. Oct 3 08:22:37.933793 Hostname: arndale-westfield Oct 3 08:22:37.933838 Hit any key to stop autoboot: 2  1  0 Oct 3 08:22:39.853725 (Re)start USB... Oct 3 08:22:39.853811 USB0: USB EHCI 1.00 Oct 3 08:22:39.865705 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 08:22:45.461722 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 08:22:45.461778 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 08:22:45.905789 Waiting for Ethernet connection... done. Oct 3 08:22:47.609700 BOOTP broadcast 1 Oct 3 08:22:47.609768 BOOTP broadcast 2 Oct 3 08:22:49.673688 DHCP client bound to address 10.149.64.45 (2158 ms) Oct 3 08:22:49.685743 Using asx0 device Oct 3 08:22:49.685828 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 08:22:49.685933 Filename 'pxelinux.0'. Oct 3 08:22:49.685960 Load address: 0x43e00000 Oct 3 08:22:49.697642 Loading: *### Oct 3 08:22:49.709765 2.5 MiB/s Oct 3 08:22:49.709825 done Oct 3 08:22:49.709865 Bytes transferred = 42430 (a5be hex) Oct 3 08:22:49.709910 missing environment variable: pxeuuid Oct 3 08:22:49.721761 Retrieving file: pxelinux.cfg/0A95402D Oct 3 08:22:49.721820 Using asx0 device Oct 3 08:22:49.721863 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 08:22:49.721911 Filename 'pxelinux.cfg/0A95402D'. Oct 3 08:22:49.733777 Load address: 0x51000000 Oct 3 08:22:49.733834 Loading: *# Oct 3 08:22:49.733876 63.5 KiB/s Oct 3 08:22:49.733916 done Oct 3 08:22:49.733955 Bytes transferred = 65 (41 hex) Oct 3 08:22:49.733997 Config file found Oct 3 08:22:49.745718 Ignoring unknown command: serial Oct 3 08:22:49.745776 1: local Oct 3 08:22:49.745817 scanning bus for devices... Oct 3 08:22:49.745859 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 08:22:49.781779 Type: Hard Disk Oct 3 08:22:49.781836 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 08:22:49.781886 Found 1 device(s). Oct 3 08:22:49.793762 Oct 3 08:22:49.793814 SCSI device 0: Oct 3 08:22:49.793856 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 08:22:49.793905 Type: Hard Disk Oct 3 08:22:49.793947 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 08:22:49.805736 ... is now current device Oct 3 08:22:49.805793 Scanning scsi 0... Oct 3 08:22:49.805834 Found U-Boot script /boot.scr Oct 3 08:22:49.985724 1742 bytes read in 43 ms (39.1 KiB/s) Oct 3 08:22:50.033746 ## Executing script at 50000000 Oct 3 08:22:50.033803 Loading dtbs/6.1.112+/exynos5250-arndale.dtb Oct 3 08:22:50.045664 46686 bytes read in 3197 ms (13.7 KiB/s) Oct 3 08:22:53.129754 1081360 bytes read in 105 ms (9.8 MiB/s) Oct 3 08:22:53.249722 Loaded xen-4.20-unstable to 0x41000000 (108010) Oct 3 08:22:53.261762 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan Oct 3 08:22:53.273690 10039808 bytes read in 526 ms (18.2 MiB/s) Oct 3 08:22:53.789712 Loaded vmlinuz-6.1.112+ to 0x42000000 (993200) Oct 3 08:22:53.801775 command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 08:22:53.813757 12059083 bytes read in 623 ms (18.5 MiB/s) Oct 3 08:22:54.425739 Loaded initrd.img-6.1.112+ to 0x43300000 (b801cb) Oct 3 08:22:54.437791 chosen { Oct 3 08:22:54.437844 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan"; Oct 3 08:22:54.449801 #size-cells = <0x00000001>; Oct 3 08:22:54.449857 #address-cells = <0x00000001>; Oct 3 08:22:54.449902 stdout-path = "serial2:115200n8"; Oct 3 08:22:54.461778 module@1 { Oct 3 08:22:54.461833 reg = <0x43300000 0x00b801cb>; Oct 3 08:22:54.461884 compatible = "xen,linux-initrd", "xen,multiboot-module"; Oct 3 08:22:54.461932 }; Oct 3 08:22:54.461970 module@0 { Oct 3 08:22:54.473771 bootargs = "ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Oct 3 08:22:54.485797 reg = <0x42000000 0x00993200>; Oct 3 08:22:54.485854 compatible = "xen,linux-zimage", "xen,multiboot-module"; Oct 3 08:22:54.497783 }; Oct 3 08:22:54.497836 }; Oct 3 08:22:54.497875 Booting 0x41000000 - 0x43000000 Oct 3 08:22:54.497918 Kernel image @ 0x41000000 [ 0x000000 - 0x144000 ] Oct 3 08:22:54.497963 ## Flattened Device Tree blob at 43000000 Oct 3 08:22:54.509745 Booting using the fdt blob at 0x43000000 Oct 3 08:22:54.509838 reserving fdt memory region: addr=43000000 size=c000 Oct 3 08:22:54.509890 Loading Device Tree to 4fff1000, end 4fffffff ... OK Oct 3 08:22:54.521725 Oct 3 08:22:54.521777 Starting kernel ...(fake run for tracing) Oct 3 08:22:54.521823 Oct 3 08:22:54.521860 Oct 3 08:22:54.533689 Starting kernel ... Oct 3 08:22:54.533746 Oct 3 08:22:54.533784 __ __ _ _ ____ ___ _ _ _ Oct 3 08:22:54.581808 \ \/ /___ _ __ | || | |___ \ / _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Oct 3 08:22:54.593775 \ // _ \ '_ \ | || |_ __) | | | |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Oct 3 08:22:54.593839 / \ __/ | | | |__ _| / __/| |_| |__| |_| | | | \__ \ || (_| | |_) | | __/ Oct 3 08:22:54.605784 /_/\_\___|_| |_| |_|(_)_____|\___/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Oct 3 08:22:54.605848 Oct 3 08:22:54.605886 (XEN) Xen version 4.20-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Thu Oct 3 04:21:25 UTC 2024 Oct 3 08:22:54.617808 (XEN) Latest ChangeSet: Fri Feb 17 17:01:22 2023 +0000 git:41190d2ceb Oct 3 08:22:54.629780 (XEN) build-id: 0a6b28d2d81aa30d09bfdfdea57218d3715bb897 Oct 3 08:22:54.629842 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Oct 3 08:22:54.641764 (XEN) 32-bit Execution: Oct 3 08:22:54.641820 (XEN) Processor Features: 00001031:00011011 Oct 3 08:22:54.641867 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Oct 3 08:22:54.653777 (XEN) Extensions: GenericTimer Security Oct 3 08:22:54.653836 (XEN) Debug Features: 02010555 Oct 3 08:22:54.653880 (XEN) Auxiliary Features: 00000000 Oct 3 08:22:54.665797 (XEN) Memory Model Features: 10201105 20000000 Oct 3 08:22:54.665888 (XEN) 01240000 02102211 Oct 3 08:22:54.665965 (XEN) ISA Features: 02101110 13112111 21232041 Oct 3 08:22:54.677772 (XEN) 11112131 10011142 00000000 Oct 3 08:22:54.677831 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Oct 3 08:22:54.689764 (XEN) Set SYSRAM to 0000000041000070 (00200070) Oct 3 08:22:54.689823 (XEN) SMP: Allowing 2 CPUs Oct 3 08:22:54.701747 (XEN) enabled workaround for: ARM erratum 766422 Oct 3 08:22:54.701747 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Oct 3 08:22:54.701747 (XEN) GICv2 initialization: Oct 3 08:22:54.713791 (XEN) gic_dist_addr=0000000010481000 Oct 3 08:22:54.713856 (XEN) gic_cpu_addr=0000000010482000 Oct 3 08:22:54.713901 (XEN) gic_hyp_addr=0000000010484000 Oct 3 08:22:54.725720 (XEN) gic_vcpu_addr=0000000010486000 Oct 3 08:22:54.725720 (XEN) gic_maintenance_irq=25 Oct 3 08:22:54.725720 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Oct 3 08:22:54.737790 (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2) Oct 3 08:22:54.737857 (XEN) Initializing Credit2 scheduler Oct 3 08:22:54.737902 (XEN) load_precision_shift: 18 Oct 3 08:22:54.737945 (XEN) load_window_shift: 30 Oct 3 08:22:54.749809 (XEN) underload_balance_tolerance: 0 Oct 3 08:22:54.749868 (XEN) overload_balance_tolerance: -3 Oct 3 08:22:54.749913 (XEN) runqueues arrangement: socket Oct 3 08:22:54.761721 (XEN) cap enforcement granularity: 10ms Oct 3 08:22:54.761769 (XEN) load tracking window length 1073741824 ns Oct 3 08:22:54.761817 (XEN) Allocated console ring of 16 KiB. Oct 3 08:22:54.773749 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Oct 3 08:22:54.773815 (XEN) CPU0: Guest atomics will try 1 times before pausing the domain Oct 3 08:22:54.785774 (XEN) Bringing up CPU1 Oct 3 08:22:54.785830 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Oct 3 08:22:54.785882 (XEN) Brought up 2 CPUs Oct 3 08:22:54.785923 (XEN) CPU 1 booted. Oct 3 08:22:54.797781 (XEN) I/O virtualisation disabled Oct 3 08:22:54.797839 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Oct 3 08:22:54.797907 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Oct 3 08:22:54.809764 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Oct 3 08:22:54.809827 (XEN) Initializing Credit2 scheduler Oct 3 08:22:54.809872 (XEN) load_precision_shift: 18 Oct 3 08:22:54.821771 (XEN) load_window_shift: 30 Oct 3 08:22:54.821828 (XEN) underload_balance_tolerance: 0 Oct 3 08:22:54.821874 (XEN) overload_balance_tolerance: -3 Oct 3 08:22:54.821925 (XEN) runqueues arrangement: socket Oct 3 08:22:54.833783 (XEN) cap enforcement granularity: 10ms Oct 3 08:22:54.833842 (XEN) load tracking window length 1073741824 ns Oct 3 08:22:54.833889 (XEN) Adding cpu 0 to runqueue 0 Oct 3 08:22:54.845778 (XEN) First cpu on runqueue, activating Oct 3 08:22:54.845838 (XEN) Adding cpu 1 to runqueue 0 Oct 3 08:22:54.845882 (XEN) alternatives: Patching with alt table 002d2f0c -> 002d2fe4 Oct 3 08:22:54.857748 (XEN) CPU0 will execute ICIALLU on guest exit Oct 3 08:22:54.857809 (XEN) CPU1 will execute ICIALLU on guest exit Oct 3 08:22:54.857855 (XEN) *** LOADING DOMAIN 0 *** Oct 3 08:22:54.857898 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Oct 3 08:22:54.869765 (XEN) Loading ramdisk from boot module @ 0000000043300000 Oct 3 08:22:54.869826 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Oct 3 08:22:54.881726 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Oct 3 08:22:55.433711 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Oct 3 08:22:55.433777 (XEN) Allocating PPI 16 for event channel interrupt Oct 3 08:22:55.469739 (XEN) d0: extended regions not supported for 32-bit guests Oct 3 08:22:55.469801 (XEN) Loading zImage from 0000000042000000 to 0000000067600000-0000000067f93200 Oct 3 08:22:55.481700 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d801cb Oct 3 08:22:55.565731 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b4c2 Oct 3 08:22:55.673767 (XEN) Initial low memory virq threshold set at 0x4000 pages. Oct 3 08:22:55.673830 (XEN) Scrubbing Free RAM in background Oct 3 08:22:55.673875 (XEN) Std. Loglevel: All Oct 3 08:22:55.685729 (XEN) Guest Loglevel: All Oct 3 08:22:55.685785 (XEN) *************************************************** Oct 3 08:22:55.685832 (XEN) WARNING: SILO mode is not enabled. Oct 3 08:22:55.697748 (XEN) It has implications on the security of the system, Oct 3 08:22:55.697810 (XEN) unless the communications have been forbidden between Oct 3 08:22:55.697858 (XEN) untrusted domains. Oct 3 08:22:55.709724 (XEN) *************************************************** Oct 3 08:22:55.709783 (XEN) 3... 2... 1... Oct 3 08:22:58.713778 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 08:22:58.713866 (XEN) Freed 356kB init memory. Oct 3 08:22:58.725665 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 08:22:59.781699 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Oct 3 08:22:59.805744 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Oct 3 08:22:59.805807 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Oct 3 08:22:59.817752 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Oct 3 08:22:59.817815 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 08:22:59.829689 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 08:22:59.865809 [ 0.000000] Linux version 6.1.112+ (osstest@himrod0) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Thu Oct 3 02:31:58 UTC 2024 Oct 3 08:22:59.889751 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 08:22:59.889819 [ 0.000000] CPU: div instructions available: patching division code Oct 3 08:22:59.901686 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 08:22:59.901721 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 08:22:59.913797 [ 0.000000] Memory policy: Data cache writealloc Oct 3 08:22:59.913858 [ 0.000000] Xen 4.20 support found Oct 3 08:22:59.925748 [ 0.000000] efi: UEFI not found. Oct 3 08:22:59.925807 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 Oct 3 08:22:59.925854 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 08:22:59.937743 [ 0.000000] Zone ranges: Oct 3 08:22:59.937800 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Oct 3 08:22:59.937849 [ 0.000000] Normal empty Oct 3 08:22:59.949756 [ 0.000000] HighMem empty Oct 3 08:22:59.949813 [ 0.000000] Movable zone start for each node Oct 3 08:22:59.949861 [ 0.000000] Early memory node ranges Oct 3 08:22:59.949905 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Oct 3 08:22:59.961744 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Oct 3 08:22:59.973738 [ 0.000000] psci: probing for conduit method from DT. Oct 3 08:22:59.973800 [ 0.000000] psci: PSCIv1.1 detected in firmware. Oct 3 08:22:59.973849 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Oct 3 08:22:59.985750 [ 0.000000] psci: Trusted OS migration not required Oct 3 08:22:59.985810 [ 0.000000] psci: SMC Calling Convention v1.2 Oct 3 08:22:59.997747 [ 0.000000] percpu: Embedded 16 pages/cpu s35412 r8192 d21932 u65536 Oct 3 08:22:59.997811 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 Oct 3 08:23:00.009760 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 08:23:00.021773 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 08:23:00.033758 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Oct 3 08:23:00.033826 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Oct 3 08:23:00.045764 [ 0.000000] Memory: 416844K/524288K available (14336K kernel code, 2180K rwdata, 5604K rodata, 2048K init, 438K bss, 41908K reserved, 65536K cma-reserved, 0K highmem) Oct 3 08:23:00.057768 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 08:23:00.069748 [ 0.000000] trace event string verifier disabled Oct 3 08:23:00.069808 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 08:23:00.081736 [ 0.000000] rcu: RCU event tracing is enabled. Oct 3 08:23:00.081797 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Oct 3 08:23:00.093760 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Oct 3 08:23:00.093830 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 08:23:00.105811 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 08:23:00.105874 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 08:23:00.117791 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 08:23:00.117855 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Oct 3 08:23:00.129757 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 08:23:00.141760 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 08:23:00.141831 [ 0.000013] Switching to timer-based delay loop, resolution 41ns Oct 3 08:23:00.153754 [ 0.000500] Console: colour dummy device 80x30 Oct 3 08:23:00.153814 [ 0.293146] printk: console [hvc0] enabled Oct 3 08:23:00.165735 [ 0.297356] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Oct 3 08:23:00.177725 [ 0.307738] CPU: Testing write buffer coherency: ok Oct 3 08:23:00.177807 [ 0.312680] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 08:23:00.189767 [ 0.322234] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 08:23:00.189831 [ 0.328647] pid_max: default: 32768 minimum: 301 Oct 3 08:23:00.201750 [ 0.333442] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 08:23:00.201819 [ 0.340714] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 08:23:00.213729 [ 0.349130] /cpus/cpu@0 missing clock-frequency property Oct 3 08:23:00.213790 [ 0.353917] /cpus/cpu@1 missing clock-frequency property Oct 3 08:23:00.225775 [ 0.359313] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 08:23:00.225838 [ 0.365826] xen:grant_table: Grant tables using version 1 layout Oct 3 08:23:00.237749 [ 0.371160] Grant table initialized Oct 3 08:23:00.237807 [ 0.374699] xen:events: Using FIFO-based ABI Oct 3 08:23:00.237855 [ 0.379019] Xen: initializing cpu0 Oct 3 08:23:00.249740 [ 0.382547] Setting up static identity map for 0x60300000 - 0x603000ac Oct 3 08:23:00.249804 [ 0.390281] rcu: Hierarchical SRCU implementation. Oct 3 08:23:00.261734 [ 0.393934] rcu: Max phase no-delay instances is 1000. Oct 3 08:23:00.261797 [ 0.401985] EFI services will not be available. Oct 3 08:23:00.273688 [ 0.405289] smp: Bringing up secondary CPUs ... Oct 3 08:23:00.273750 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 08:23:00.345781 [ 0.479732] Xen: initializing cpu1 Oct 3 08:23:00.345840 [ 0.479891] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 08:23:00.357753 [ 0.479921] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 08:23:00.357827 [ 0.498789] smp: Brought up 1 node, 2 CPUs Oct 3 08:23:00.369757 [ 0.502560] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 08:23:00.369821 [ 0.508871] CPU: All CPU(s) started in SVC mode. Oct 3 08:23:00.381712 [ 0.514275] devtmpfs: initialized Oct 3 08:23:00.381772 [ 0.526906] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 08:23:00.393730 [ 0.533390] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Oct 3 08:23:00.405761 [ 0.543111] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 08:23:00.417747 [ 0.551119] pinctrl core: initialized pinctrl subsystem Oct 3 08:23:00.417808 [ 0.557666] DMI not present or invalid. Oct 3 08:23:00.429751 [ 0.560772] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 08:23:00.429816 [ 0.567959] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 08:23:00.441728 [ 0.576748] thermal_sys: Registered thermal governor 'step_wise' Oct 3 08:23:00.441792 [ 0.576877] software IO TLB: area num 2. Oct 3 08:23:00.453741 [ 0.585560] software IO TLB: only able to allocate 8 MB Oct 3 08:23:00.453804 [ 0.592689] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Oct 3 08:23:00.465746 [ 0.597875] No ATAGs? Oct 3 08:23:00.465802 [ 0.600221] hw-breakpoint: Failed to enable monitor mode on CPU 0. Oct 3 08:23:00.465854 [ 0.608744] Serial: AMBA PL011 UART driver Oct 3 08:23:00.477690 [ 0.630888] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 62 Oct 3 08:23:00.501654 [ 0.680350] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 08:23:00.549739 [ 0.704932] xen:balloon: Initialising balloon driver Oct 3 08:23:00.573753 [ 0.712514] iommu: Default domain type: Translated Oct 3 08:23:00.585747 [ 0.716018] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 08:23:00.585813 [ 0.723005] SCSI subsystem initialized Oct 3 08:23:00.585859 [ 0.726588] usbcore: registered new interface driver usbfs Oct 3 08:23:00.597741 [ 0.731765] usbcore: registered new interface driver hub Oct 3 08:23:00.597825 [ 0.737159] usbcore: registered new device driver usb Oct 3 08:23:00.609727 [ 0.743793] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 08:23:00.609789 [ 0.747415] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 08:23:00.621739 [ 0.753721] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 08:23:00.621812 [ 0.762156] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 08:23:00.633762 [ 0.771286] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 08:23:00.645745 [ 0.776820] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 08:23:00.645807 [ 0.781496] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 08:23:00.645857 [ 0.787762] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 08:23:00.657754 [ 0.792967] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 08:23:00.657815 [ 0.797743] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 08:23:00.669738 [ 0.803854] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 08:23:00.669800 [ 0.809045] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 08:23:00.681749 [ 0.813958] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 08:23:00.681813 [ 0.819998] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 08:23:00.693769 [ 0.825779] pps_core: LinuxPPS API ver. 1 registered Oct 3 08:23:00.693831 [ 0.830224] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 08:23:00.705733 [ 0.839402] PTP clock support registered Oct 3 08:23:00.705792 [ 0.852051] EDAC MC: Ver: 3.0.0 Oct 3 08:23:00.717698 [ 0.863944] vgaarb: loaded Oct 3 08:23:00.729706 [ 0.867611] clocksource: Switched to clocksource arch_sys_counter Oct 3 08:23:00.741703 [ 0.879112] NET: Registered PF_INET protocol family Oct 3 08:23:00.741766 [ 0.882756] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Oct 3 08:23:00.753765 [ 0.890692] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 08:23:00.765750 [ 0.898356] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 08:23:00.765818 [ 0.906142] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Oct 3 08:23:00.777732 [ 0.913990] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Oct 3 08:23:00.789737 [ 0.921277] TCP: Hash tables configured (established 4096 bind 4096) Oct 3 08:23:00.789802 [ 0.927646] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 08:23:00.801743 [ 0.934187] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 08:23:00.801808 [ 0.941323] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 08:23:00.813768 [ 0.948003] RPC: Registered named UNIX socket transport module. Oct 3 08:23:00.813832 [ 0.952922] RPC: Registered udp transport module. Oct 3 08:23:00.825743 [ 0.957719] RPC: Registered tcp transport module. Oct 3 08:23:00.825805 [ 0.962470] RPC: Registered tcp NFSv4.1 backchannel transport module. Oct 3 08:23:00.837784 [ 0.968996] PCI: CLS 0 bytes, default 64 Oct 3 08:23:00.837844 [ 0.974278] Initialise system trusted keyrings Oct 3 08:23:00.837892 [ 0.977722] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Oct 3 08:23:00.849721 [ 0.989183] squashfs: version 4.0 (2009/01/31) Phillip Lougher Oct 3 08:23:00.861703 [ 0.994003] Trying to unpack rootfs image as initramfs... Oct 3 08:23:00.861766 [ 1.018279] NFS: Registering the id_resolver key type Oct 3 08:23:00.885760 [ 1.021991] Key type id_resolver registered Oct 3 08:23:00.885820 [ 1.026217] Key type id_legacy registered Oct 3 08:23:00.897753 [ 1.030425] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Oct 3 08:23:00.897818 [ 1.037074] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Oct 3 08:23:00.909718 [ 1.079065] Key type asymmetric registered Oct 3 08:23:00.945736 [ 1.081797] Asymmetric key parser 'x509' registered Oct 3 08:23:00.945797 [ 1.086857] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 08:23:00.957777 [ 1.094239] io scheduler mq-deadline registered Oct 3 08:23:00.957836 [ 1.098842] io scheduler kyber registered Oct 3 08:23:00.969696 [ 1.139845] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 08:23:01.005743 [ 1.221974] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 08:23:01.089777 [ 1.228222] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 08:23:01.101692 [ 1.260536] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 08:23:01.125755 [ 1.266742] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 08:23:01.137738 [ 1.288269] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 08:23:01.161743 [ 1.294474] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 08:23:01.173658 [ 1.328392] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 08:23:01.197766 [ 1.334593] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 08:23:01.209707 [ 1.362730] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 08:23:01.233728 [ 1.400230] xen:xen_evtchn: Event-channel device installed Oct 3 08:23:01.269715 [ 1.483019] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 08:23:01.353719 [ 1.492392] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 113, base_baud = 0) is a S3C6400/10 Oct 3 08:23:01.365753 [ 1.500596] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 114, base_baud = 0) is a S3C6400/10 Oct 3 08:23:01.377947 [ 1.509628] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 115, base_baud = 0) is a S3C6400/10 Oct 3 08:23:01.378020 [ 1.518897] SuperH (H)SCI(F) driver initialized Oct 3 08:23:01.389764 [ 1.523649] STMicroelectronics ASC driver initialized Oct 3 08:23:01.389826 [ 1.529297] STM32 USART driver initialized Oct 3 08:23:01.401709 [ 1.533895] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 08:23:01.401775 [ 1.548640] brd: module loaded Oct 3 08:23:01.413698 [ 1.555425] loop: module loaded Oct 3 08:23:01.425670 [ 1.572172] Invalid max_queues (4), will use default max: 2. Oct 3 08:23:01.437659 [ 1.600702] tun: Universal TUN/TAP device driver, 1.6 Oct 3 08:23:01.473758 [ 1.604587] CAN device driver interface Oct 3 08:23:01.473817 [ 1.609995] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Oct 3 08:23:01.473867 [ 1.621282] xen_netfront: Initialising Xen virtual ethernet driver Oct 3 08:23:01.485752 [ 1.626184] pegasus: Pegasus/Pegasus II USB Ethernet driver Oct 3 08:23:01.497796 [ 1.631798] usbcore: registered new interface driver pegasus Oct 3 08:23:01.497858 [ 1.637505] usbcore: registered new interface driver asix Oct 3 08:23:01.509795 [ 1.642988] usbcore: registered new interface driver ax88179_178a Oct 3 08:23:01.509858 [ 1.649146] usbcore: registered new interface driver cdc_ether Oct 3 08:23:01.525793 [ 1.655046] usbcore: registered new interface driver smsc75xx Oct 3 08:23:01.525857 [ 1.660896] usbcore: registered new interface driver smsc95xx Oct 3 08:23:01.525906 [ 1.666668] usbcore: registered new interface driver net1080 Oct 3 08:23:01.537814 [ 1.672420] usbcore: registered new interface driver cdc_subset Oct 3 08:23:01.537876 [ 1.678396] usbcore: registered new interface driver zaurus Oct 3 08:23:01.549785 [ 1.684037] usbcore: registered new interface driver cdc_ncm Oct 3 08:23:01.549847 [ 1.693685] usbcore: registered new interface driver usb-storage Oct 3 08:23:01.561822 [ 1.759265] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 08:23:01.621688 [ 1.775687] Freeing initrd memory: 11780K Oct 3 08:23:01.645678 [ 1.778490] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T08:23:02 UTC (1727943782) Oct 3 08:23:01.645717 [ 1.788493] i2c_dev: i2c /dev entries driver Oct 3 08:23:01.657715 [ 1.799259] syscon-poweroff 10040000.system-controller:syscon-poweroff: pm_power_off already claimed for psci_sys_poweroff Oct 3 08:23:01.669771 [ 1.808987] syscon-poweroff: probe of 10040000.system-controller:syscon-poweroff failed with error -16 Oct 3 08:23:01.681753 [ 1.820265] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 08:23:01.693715 [ 1.831144] device-mapper: uevent: version 1.0.3 Oct 3 08:23:01.693776 [ 1.834722] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Oct 3 08:23:01.705758 [ 1.843582] cpu cpu0: OPP table can't be empty Oct 3 08:23:01.705817 [ 1.848617] failed to register cpuidle driver Oct 3 08:23:01.717758 [ 1.851833] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Oct 3 08:23:01.717823 [ 1.860150] sdhci: Secure Digital Host Controller Interface driver Oct 3 08:23:01.729724 [ 1.865199] sdhci: Copyright(c) Pierre Ossman Oct 3 08:23:01.729785 [ 1.873184] sdhci-pltfm: SDHCI platform and OF driver helper Oct 3 08:23:01.741758 [ 1.880872] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 08:23:01.753763 [ 1.886160] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Oct 3 08:23:01.753829 [ 1.892825] usbcore: registered new interface driver usbhid Oct 3 08:23:01.765738 [ 1.897672] usbhid: USB HID core driver Oct 3 08:23:01.765798 [ 1.908483] NET: Registered PF_INET6 protocol family Oct 3 08:23:01.777749 [ 1.913070] Segment Routing with IPv6 Oct 3 08:23:01.777808 [ 1.915839] In-situ OAM (IOAM) with IPv6 Oct 3 08:23:01.789743 [ 1.919926] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Oct 3 08:23:01.789807 [ 1.926243] NET: Registered PF_PACKET protocol family Oct 3 08:23:01.789857 [ 1.930951] can: controller area network core Oct 3 08:23:01.801737 [ 1.935377] NET: Registered PF_CAN protocol family Oct 3 08:23:01.801799 [ 1.940215] can: raw protocol Oct 3 08:23:01.801843 [ 1.943236] can: broadcast manager protocol Oct 3 08:23:01.813753 [ 1.947492] can: netlink gateway - max_hops=1 Oct 3 08:23:01.813814 [ 1.952178] Key type dns_resolver registered Oct 3 08:23:01.825741 [ 1.956841] ThumbEE CPU extension supported. Oct 3 08:23:01.825802 [ 1.960619] Registering SWP/SWPB emulation handler Oct 3 08:23:01.825850 [ 1.966008] Loading compiled-in X.509 certificates Oct 3 08:23:01.837661 [ 1.993518] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 08:23:01.861754 [ 1.999729] clk: Not disabling unused clocks Oct 3 08:23:01.861814 [ 2.006597] Freeing unused kernel image (initmem) memory: 2048K Oct 3 08:23:01.873735 [ 2.012752] Run /init as init process Oct 3 08:23:01.873794 Loading, please wait... Oct 3 08:23:01.909686 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 08:23:01.969710 [ 3.407215] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 08:23:03.277776 [ 3.414340] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 08:23:03.289752 [ 3.424616] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 08:23:03.289822 [ 3.436973] phy phy-12130000.phy.8: phy_power_on was called before phy_init Oct 3 08:23:03.301723 [ 3.442597] exynos-ohci 12120000.usb: USB Host Controller Oct 3 08:23:03.313748 [ 3.448085] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Oct 3 08:23:03.325749 [ 3.456730] phy phy-12130000.phy.8: phy_power_on was called before phy_init Oct 3 08:23:03.325845 [ 3.462840] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 08:23:03.337735 [ 3.468409] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Oct 3 08:23:03.337805 [ 3.487048] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 Oct 3 08:23:03.361700 [ 3.500636] Synopsys Designware Multimedia Card Interface Driver Oct 3 08:23:03.373707 [ 3.506508] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 Oct 3 08:23:03.373771 [ 3.539170] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 08:23:03.409705 [ 3.554424] hub 2-0:1.0: USB hub found Oct 3 08:23:03.421747 [ 3.554560] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 08:23:03.433733 [ 3.556852] hub 2-0:1.0: 3 ports detected Oct 3 08:23:03.433793 [ 3.569805] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 08:23:03.433847 [ 3.586384] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 08:23:03.457748 [ 3.590087] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 08:23:03.457812 [ 3.590102] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 08:23:03.469749 [ 3.602158] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo Oct 3 08:23:03.481656 [ 3.628749] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 08:23:03.493749 [ 3.629103] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 08:23:03.505689 [ 3.633824] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 08:23:03.505723 [ 3.647623] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 127,32 bit host data width,128 deep fifo Oct 3 08:23:03.517756 [ 3.682475] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 08:23:03.553714 [ 3.705035] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 08:23:03.577742 [ 3.709395] mmc_host mmc0: card is polling. Oct 3 08:23:03.577801 [ 3.730515] hub 1-0:1.0: USB hub found Oct 3 08:23:03.601725 [ 3.735451] hub 1-0:1.0: 3 ports detected Oct 3 08:23:03.601785 [ 3.740963] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Oct 3 08:23:03.613728 [ 3.741023] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 08:23:03.613801 [ 3.745986] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 08:23:03.625770 [ 3.761876] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Oct 3 08:23:03.637747 [ 3.770798] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 08:23:03.649739 [ 3.780448] s3c-rtc 101e0000.rtc: registered as rtc1 Oct 3 08:23:03.649802 [ 3.787707] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 08:23:03.661711 [ 3.807755] scsi host0: ahci-dwc Oct 3 08:23:03.673662 [ 3.809903] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 129 Oct 3 08:23:03.685691 [ 3.871831] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 08:23:03.745727 [ 3.888144] mmc0: new DDR MMC card at address 0001 Oct 3 08:23:03.771638 [ 3.894226] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Oct 3 08:23:03.771712 [ 3.898360] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 08:23:03.771834 [ 3.912805] mmc1: new high speed SDHC card at address aaaa Oct 3 08:23:03.781743 [ 3.918124] mmcblk0: p1 p2 p3 p4 Oct 3 08:23:03.781802 [ 3.928338] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Oct 3 08:23:03.793724 [ 3.934998] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Oct 3 08:23:03.805717 [ 3.941839] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Oct 3 08:23:03.805778 [ 3.953274] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Oct 3 08:23:03.817729 [ 4.317690] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 08:23:04.189770 [ 4.323434] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 08:23:04.189837 [ 4.329319] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 08:23:04.201750 [ 4.337150] ata1.00: configured for UDMA/133 Oct 3 08:23:04.201811 [ 4.340923] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 08:23:04.213764 [ 4.349912] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 08:23:04.225765 [ 4.356070] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 08:23:04.225828 [ 4.361515] sd 0:0:0:0: [sda] Write Protect is off Oct 3 08:23:04.225875 [ 4.366287] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 08:23:04.237762 [ 4.375468] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 08:23:04.249697 [ 4.399158] sda: sda1 sda2 < sda5 > Oct 3 08:23:04.261716 [ 4.402289] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 08:23:04.273677 [ 4.426690] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 08:23:04.297632 [ 4.488952] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Oct 3 08:23:04.357771 [ 4.495959] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 08:23:04.369728 [ 4.500347] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 08:23:04.369798 [ 4.511486] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 08:23:04.381791 [ 4.520443] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Oct 3 08:23:04.393749 [ 4.525922] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 08:23:04.393812 [ 4.531231] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 08:23:04.405713 [ 4.538942] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 08:23:04.405775 [ 4.587945] hub 3-0:1.0: USB hub found Oct 3 08:23:04.453781 [ 4.590579] hub 3-0:1.0: 1 port detected Oct 3 08:23:04.453840 [ 4.596278] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 08:23:04.465824 [ 4.605394] hub 4-0:1.0: USB hub found Oct 3 08:23:04.477767 [ 4.607845] hub 4-0:1.0: 1 port detected Oct 3 08:23:04.477828 [ 4.726792] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 08:23:04.597760 [ 4.799737] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 08:23:04.669728 [ 4.908424] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 08:23:04.777729 [ 5.016545] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 08:23:04.885758 [ 5.124648] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 08:23:04.993760 [ 5.232721] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 08:23:05.101754 [ 5.340785] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 08:23:05.209713 [ 5.448859] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 08:23:05.317804 [ 5.556909] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 08:23:05.425755 [ 5.664973] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 08:23:05.533745 [ 6.073687] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 08:23:05.941771 [ 6.181404] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 08:23:06.049770 [ 6.789737] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 08:23:06.661716 [ 7.127612] random: crng init done Oct 3 08:23:06.997655 Begin: Loading essential drivers ... done. Oct 3 08:23:07.597688 Begin: Running /scripts/init-premount ... done. Oct 3 08:23:10.609792 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 08:23:10.621728 Begin: Running /scripts/local-premount ... done. Oct 3 08:23:10.621789 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 08:23:10.669723 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 08:23:10.753771 /dev/mapper/arndale--westfield--vg-root: clean, 46037/1220608 files, 606551/4882432 blocks Oct 3 08:23:10.957811 done. Oct 3 08:23:10.969708 [ 11.113759] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 08:23:10.981774 [ 11.456789] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 08:23:11.329674 done. Oct 3 08:23:11.329734 Begin: Running /scripts/local-bottom ... done. Oct 3 08:23:11.377741 Begin: Running /scripts/init-bottom ... done. Oct 3 08:23:11.425712 INIT: version 3.06 booting Oct 3 08:23:11.833788 INIT: No inittab.d directory found Oct 3 08:23:11.893617 Using makefile-style concurrent boot in runlevel S. Oct 3 08:23:12.169631 Starting hotplug events dispatcher: systemd-udevd. Oct 3 08:23:13.717603 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 08:23:14.221646 Synthesizing the initial hotplug events (devices)...[ 14.746573] wm8994 3-001a: Device is not a WM8994, ID is 0 Oct 3 08:23:14.617798 [ 14.753813] wm8994: probe of 3-001a failed with error -22 Oct 3 08:23:14.617871 [ 15.375873] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Oct 3 08:23:15.241756 [ 15.410470] mc: Linux media interface: v0.10 Oct 3 08:23:15.277740 [ 15.445452] s5p-secss 10830000.sss: s5p-sss driver registered Oct 3 08:23:15.313696 [ 15.515111] videodev: Linux video capture interface: v2.00 Oct 3 08:23:15.385665 done. Oct 3 08:23:15.409719 Waiting for /dev to be fully populated...[ 15.655039] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 08:23:15.529731 [ 15.746823] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 08:23:15.613802 [ 15.806324] exynos-gsc 13e00000.gsc: Adding to iommu group 0 Oct 3 08:23:15.673760 [ 15.818388] exynos-gsc 13e10000.gsc: Adding to iommu group 1 Oct 3 08:23:15.685716 [ 15.841582] exynos-gsc 13e20000.gsc: Adding to iommu group 2 Oct 3 08:23:15.709733 [ 15.858156] blk_print_req_error: 6 callbacks suppressed Oct 3 08:23:15.721751 [ 15.858165] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 08:23:15.733776 [ 15.858222] exynos-gsc 13e30000.gsc: Adding to iommu group 3 Oct 3 08:23:15.745710 [ 15.906404] s5p-mfc 11000000.codec: Adding to iommu group 4 Oct 3 08:23:15.769669 [ 15.921447] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Oct 3 08:23:15.793744 [ 15.962196] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 08:23:15.829798 [ 15.970944] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 08:23:15.841757 [ 15.987221] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 08:23:15.853757 [ 15.994624] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 08:23:15.865787 [ 16.007562] s5p-mfc 11000000.codec: decoder registered as /dev/video4 Oct 3 08:23:15.877748 [ 16.015118] s5p-mfc 11000000.codec: encoder registered as /dev/video5 Oct 3 08:23:15.889676 [ 16.072976] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 08:23:15.949749 [ 16.147686] usb3503 usb-hub: switched to HUB mode Oct 3 08:23:16.009715 [ 16.151038] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 08:23:16.021719 [ 16.182435] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 08:23:16.057732 [ 16.292115] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 08:23:16.165749 [ 16.401289] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 08:23:16.273744 [ 16.433155] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Oct 3 08:23:16.309653 [ 16.512965] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 08:23:16.381777 [ 16.521998] usb 2-3: new high-speed USB device number 2 using exynos-ehci Oct 3 08:23:16.393654 [ 16.622045] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 08:23:16.489764 [ 16.728696] hub 2-3:1.0: USB hub found Oct 3 08:23:16.597718 [ 16.731394] hub 2-3:1.0: 3 ports detected Oct 3 08:23:16.597776 [ 16.800259] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 08:23:16.669797 [ 16.807962] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 08:23:16.681784 [ 16.816700] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 08:23:16.693793 [ 16.828460] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 08:23:16.705695 [ 16.836257] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 08:23:16.705735 [ 16.845002] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 08:23:16.717668 [ 17.056184] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 08:23:16.933751 [ 17.063903] usb 2-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 08:23:16.933819 [ 17.163973] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 08:23:17.029758 [ 17.221236] hub 2-3.2:1.0: USB hub found Oct 3 08:23:17.089771 [ 17.224241] hub 2-3.2:1.0: 4 ports detected Oct 3 08:23:17.089830 [ 17.275047] usbcore: registered new device driver onboard-usb-hub Oct 3 08:23:17.149700 [ 17.398383] hub 2-3.2:1.0: USB hub found Oct 3 08:23:17.269726 [ 17.401367] hub 2-3.2:1.0: 4 ports detected Oct 3 08:23:17.269786 [ 17.414077] hub 2-3.2:1.0: USB hub found Oct 3 08:23:17.281740 [ 17.417074] hub 2-3.2:1.0: 4 ports detected Oct 3 08:23:17.281799 [ 17.737648] usb 2-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 08:23:17.605733 [ 17.772379] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 08:23:17.641793 done. Oct 3 08:23:17.677710 [ 17.901599] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 08:23:17.773731 [ 18.183171] EXT4-fs (dm-0): re-mounted. Quota mode: disabled. Oct 3 08:23:18.049698 [ 18.599576] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 08:23:18.469792 [ 18.613931] Asix Electronics AX88772A usb-002:004:10: attached PHY driver (mii_bus:phy_addr=usb-002:004:10, irq=POLL) Oct 3 08:23:18.481786 [ 18.623958] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, a2:7a:cc:7d:86:fd Oct 3 08:23:18.493795 Checking file systems.../dev/sda1: clean, 2105/61056 files, 43350/243968 blocks Oct 3 08:23:19.561637 done. Oct 3 08:23:19.573713 Cleaning up temporary files... /tmp Oct 3 08:23:19.801696 . Oct 3 08:23:19.801749 [ 20.118717] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 08:23:19.993751 [ 20.167628] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 08:23:20.041707 [ 20.262833] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k Oct 3 08:23:20.137654 Mounting local filesystems...done. Oct 3 08:23:20.365773 Activating swapfile swap, if any...done. Oct 3 08:23:20.365835 Cleaning up temporary files.... Oct 3 08:23:20.401687 Starting Setting kernel variables: sysctl. Oct 3 08:23:20.521737 [ 22.031305] xenbr0: port 1(eth0) entered blocking state Oct 3 08:23:21.901813 [ 22.035183] xenbr0: port 1(eth0) entered disabled state Oct 3 08:23:21.901882 [ 22.040672] device eth0 entered promiscuous mode Oct 3 08:23:21.913725 [ 22.051311] asix 2-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 08:23:21.925736 Configuring network interfaces...RTNETLINK answers: Operation not supported Oct 3 08:23:23.821795 Oct 3 08:23:23.821853 Waiting for xenbr0 to get ready (MAXWAIT is 2 seconds). Oct 3 08:23:23.833721 [ 24.274962] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 08:23:24.145730 [ 24.275009] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 3 08:23:24.145766 [ 24.287331] xenbr0: port 1(eth0) entered blocking state Oct 3 08:23:24.157761 [ 24.292570] xenbr0: port 1(eth0) entered forwarding state Oct 3 08:23:24.157823 [ 24.298157] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready Oct 3 08:23:24.169737 done. Oct 3 08:23:24.313682 Cleaning up temporary files.... Oct 3 08:23:24.385722 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Oct 3 08:23:24.433759 Starting nftables: none Oct 3 08:23:24.517711 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Oct 3 08:23:24.577722 failed! Oct 3 08:23:24.577751 startpar: service(s) returned failure: nftables ... failed! Oct 3 08:23:24.589700 INIT: Entering runlevel: 2 Oct 3 08:23:24.601727 Using makefile-style concurrent boot in runlevel 2. Oct 3 08:23:24.625741 Starting Apache httpd web server: apache2AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.149.64.45. Set the 'ServerName' directive globally to suppress this message Oct 3 08:23:25.393758 . Oct 3 08:23:26.425737 Starting NTP server: ntpd2024-10-03T08:23:27 ntpd[1150]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 08:23:26.857708 2024-10-03T08:23:27 ntpd[1150]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 08:23:26.869752 . Oct 3 08:23:26.869803 Starting SMP IRQ Balancer: irqbalance. Oct 3 08:23:27.025720 Starting system message bus: dbus. Oct 3 08:23:27.637724 Starting OpenBSD Secure Shell server: sshd. Oct 3 08:23:28.081716 Starting /usr/local/sbin/oxenstored.... Oct 3 08:23:31.277822 Setting domain 0 name, domid and JSON config... Oct 3 08:23:31.277901 Done setting up Dom0 Oct 3 08:23:31.277944 Starting xenconsoled... Oct 3 08:23:31.277986 Starting QEMU as disk backend for dom0 Oct 3 08:23:31.289680 Oct 3 08:23:32.613752 Debian GNU/Linux 12 arndale-westfield hvc0 Oct 3 08:23:32.613832 Oct 3 08:23:32.613871 arndale-westfield login: [ 70.081641] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 08:24:09.949635 [ 70.345871] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 08:24:10.213649 [ 72.042831] EXT4-fs (dm-2): unmounting filesystem. Oct 3 08:24:11.905631 [ 88.271607] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 08:24:28.137825 [ 88.402274] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 08:24:28.269769 [ 90.318423] xenbr0: port 2(vif1.0) entered blocking state Oct 3 08:24:30.189826 [ 90.322473] xenbr0: port 2(vif1.0) entered disabled state Oct 3 08:24:30.189912 [ 90.328140] device vif1.0 entered promiscuous mode Oct 3 08:24:30.201768 (XEN) d1v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 08:24:34.249740 (XEN) d1v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 08:24:34.357756 (XEN) d1v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 08:24:34.405691 (XEN) common/grant_table.c:1909:d1v0 Expanding d1 grant table from 1 to 2 frames Oct 3 08:24:37.237771 (XEN) common/grant_table.c:1909:d1v0 Expanding d1 grant table from 2 to 3 frames Oct 3 08:24:37.237847 [ 97.440545] vif vif-1-0 vif1.0: Guest Rx ready Oct 3 08:24:37.309790 [ 97.443716] IPv6: ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready Oct 3 08:24:37.309855 [ 97.450383] xenbr0: port 2(vif1.0) entered blocking state Oct 3 08:24:37.321754 [ 97.455828] xenbr0: port 2(vif1.0) entered forwarding state Oct 3 08:24:37.321816 (XEN) gnttab_mark_dirty not implemented yet Oct 3 08:24:37.357701 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 08:25:11.660966 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 08:31:52.061659 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 08:38:33.421839 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 08:45:14.833130 [ 1548.283223] xenbr0: port 2(vif1.0) entered disabled state Oct 3 08:48:48.136782 [ 1561.148034] xenbr0: port 2(vif1.0) entered disabled state Oct 3 08:49:00.997823 [ 1561.152600] device vif1.0 left promiscuous mode Oct 3 08:49:01.009713 [ 1561.156737] xenbr0: port 2(vif1.0) entered disabled state Oct 3 08:49:01.009713 [ 1564.549028] EXT4-fs (dm-2): unmounting filesystem. Oct 3 08:49:04.405722 [ 1577.954520] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 08:49:17.813819 [ 1578.085296] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 08:49:17.945788 [ 1578.690016] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 08:49:18.545856 [ 1578.707198] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 08:49:18.557848 [ 1588.746345] xenbr0: port 2(vif2.0) entered blocking state Oct 3 08:49:28.593704 [ 1588.750421] xenbr0: port 2(vif2.0) entered disabled state Oct 3 08:49:28.605613 [ 1588.756032] device vif2.0 entered promiscuous mode Oct 3 08:49:28.605643 (XEN) d2v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 08:49:32.801598 (XEN) d2v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 08:49:32.909720 (XEN) d2v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 08:49:32.957658 (XEN) common/grant_table.c:1909:d2v0 Expanding d2 grant table from 1 to 2 frames Oct 3 08:49:36.017721 (XEN) common/grant_table.c:1909:d2v0 Expanding d2 grant table from 2 to 3 frames Oct 3 08:49:36.029655 [ 1596.238620] vif vif-2-0 vif2.0: Guest Rx ready Oct 3 08:49:36.089693 [ 1596.242608] IPv6: ADDRCONF(NETDEV_CHANGE): vif2.0: link becomes ready Oct 3 08:49:36.089730 [ 1596.248696] xenbr0: port 2(vif2.0) entered blocking state Oct 3 08:49:36.101691 [ 1596.253691] xenbr0: port 2(vif2.0) entered forwarding state Oct 3 08:49:36.113629 [ 1636.124256] xenbr0: port 2(vif2.0) entered disabled state Oct 3 08:50:15.978097 [ 1636.389333] xenbr0: port 2(vif2.0) entered disabled state Oct 3 08:50:16.241909 [ 1636.393708] device vif2.0 left promiscuous mode Oct 3 08:50:16.241944 [ 1636.398291] xenbr0: port 2(vif2.0) entered disabled state Oct 3 08:50:16.241972 [ 1662.854952] EXT4-fs (dm-2): unmounting filesystem. Oct 3 08:50:42.701691 [ 1664.125535] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 08:50:43.973828 [ 1664.256115] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 08:50:44.105758 [ 1664.730440] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 08:50:44.585729 [ 1664.747331] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 08:50:44.597709 [ 1672.585994] xenbr0: port 2(vif3.0) entered blocking state Oct 3 08:50:52.436890 [ 1672.590082] xenbr0: port 2(vif3.0) entered disabled state Oct 3 08:50:52.436890 [ 1672.595687] device vif3.0 entered promiscuous mode Oct 3 08:50:52.448848 (XEN) d3v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 08:50:56.641869 (XEN) d3v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 08:50:56.749859 (XEN) d3v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 08:50:56.797820 (XEN) common/grant_table.c:1909:d3v0 Expanding d3 grant table from 1 to 2 frames Oct 3 08:50:59.821816 (XEN) common/grant_table.c:1909:d3v0 Expanding d3 grant table from 2 to 3 frames Oct 3 08:50:59.821890 [ 1680.047566] vif vif-3-0 vif3.0: Guest Rx ready Oct 3 08:50:59.893838 [ 1680.050995] IPv6: ADDRCONF(NETDEV_CHANGE): vif3.0: link becomes ready Oct 3 08:50:59.905882 [ 1680.057359] xenbr0: port 2(vif3.0) entered blocking state Oct 3 08:50:59.905948 [ 1680.063395] xenbr0: port 2(vif3.0) entered forwarding state Oct 3 08:50:59.917733 [ 1714.793245] xenbr0: port 2(vif3.0) entered disabled state Oct 3 08:51:34.640711 [ 1715.030478] xenbr0: port 2(vif3.0) entered disabled state Oct 3 08:51:34.880976 [ 1715.034862] device vif3.0 left promiscuous mode Oct 3 08:51:34.881024 [ 1715.039195] xenbr0: port 2(vif3.0) entered disabled state Oct 3 08:51:34.892895 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 08:51:56.253876 [ 1740.745529] EXT4-fs (dm-2): unmounting filesystem. Oct 3 08:52:00.597696 [ 1742.029334] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 08:52:01.881861 [ 1742.159882] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 08:52:02.013704 [ 1742.656011] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 08:52:02.517705 [ 1742.673035] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 08:52:02.517765 [ 1750.497269] xenbr0: port 2(vif4.0) entered blocking state Oct 3 08:52:10.344867 [ 1750.501359] xenbr0: port 2(vif4.0) entered disabled state Oct 3 08:52:10.356810 [ 1750.506951] device vif4.0 entered promiscuous mode Oct 3 08:52:10.356810 (XEN) d4v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 08:52:14.560961 (XEN) d4v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 08:52:14.680979 (XEN) d4v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 08:52:14.716997 (XEN) common/grant_table.c:1909:d4v1 Expanding d4 grant table from 1 to 2 frames Oct 3 08:52:17.773752 (XEN) common/grant_table.c:1909:d4v1 Expanding d4 grant table from 2 to 3 frames Oct 3 08:52:17.773841 [ 1757.990756] vif vif-4-0 vif4.0: Guest Rx ready Oct 3 08:52:17.845723 [ 1757.993886] IPv6: ADDRCONF(NETDEV_CHANGE): vif4.0: link becomes ready Oct 3 08:52:17.845792 [ 1758.002451] xenbr0: port 2(vif4.0) entered blocking state Oct 3 08:52:17.857710 [ 1758.006820] xenbr0: port 2(vif4.0) entered forwarding state Oct 3 08:52:17.857775 [ 1791.510012] xenbr0: port 2(vif4.0) entered disabled state Oct 3 08:52:51.357770 [ 1791.758027] xenbr0: port 2(vif4.0) entered disabled state Oct 3 08:52:51.609777 [ 1791.762483] device vif4.0 left promiscuous mode Oct 3 08:52:51.609839 [ 1791.766683] xenbr0: port 2(vif4.0) entered disabled state Oct 3 08:52:51.621713 [ 1817.451309] EXT4-fs (dm-2): unmounting filesystem. Oct 3 08:53:17.301774 [ 1818.699677] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 08:53:18.541811 [ 1818.830264] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 08:53:18.673937 [ 1819.317376] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 08:53:19.165779 [ 1819.334859] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 08:53:19.177731 [ 1827.063775] xenbr0: port 2(vif5.0) entered blocking state Oct 3 08:53:26.905770 [ 1827.067865] xenbr0: port 2(vif5.0) entered disabled state Oct 3 08:53:26.917735 [ 1827.073460] device vif5.0 entered promiscuous mode Oct 3 08:53:26.917823 (XEN) d5v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 08:53:31.117781 (XEN) d5v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 08:53:31.225830 (XEN) d5v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 08:53:31.273656 (XEN) common/grant_table.c:1909:d5v1 Expanding d5 grant table from 1 to 2 frames Oct 3 08:53:34.289818 (XEN) common/grant_table.c:1909:d5v1 Expanding d5 grant table from 2 to 3 frames Oct 3 08:53:34.301780 [ 1834.532893] vif vif-5-0 vif5.0: Guest Rx ready Oct 3 08:53:34.373825 [ 1834.536020] IPv6: ADDRCONF(NETDEV_CHANGE): vif5.0: link becomes ready Oct 3 08:53:34.385809 [ 1834.542637] xenbr0: port 2(vif5.0) entered blocking state Oct 3 08:53:34.385872 [ 1834.551748] xenbr0: port 2(vif5.0) entered forwarding state Oct 3 08:53:34.397716 [ 1868.718672] xenbr0: port 2(vif5.0) entered disabled state Oct 3 08:54:08.569043 [ 1868.978176] xenbr0: port 2(vif5.0) entered disabled state Oct 3 08:54:08.832999 [ 1868.982949] device vif5.0 left promiscuous mode Oct 3 08:54:08.833065 [ 1868.987007] xenbr0: port 2(vif5.0) entered disabled state Oct 3 08:54:08.833115 [ 1894.563348] EXT4-fs (dm-2): unmounting filesystem. Oct 3 08:54:34.405874 [ 1895.814382] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 08:54:35.665685 [ 1895.945049] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 08:54:35.797717 [ 1896.424148] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 08:54:36.277769 [ 1896.449734] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 08:54:36.301708 [ 1904.497082] xenbr0: port 2(vif6.0) entered blocking state Oct 3 08:54:44.341787 [ 1904.501186] xenbr0: port 2(vif6.0) entered disabled state Oct 3 08:54:44.353754 [ 1904.506753] device vif6.0 entered promiscuous mode Oct 3 08:54:44.353817 (XEN) d6v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 08:54:48.553706 (XEN) d6v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 08:54:48.661728 (XEN) d6v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 08:54:48.709699 (XEN) common/grant_table.c:1909:d6v0 Expanding d6 grant table from 1 to 2 frames Oct 3 08:54:51.796929 (XEN) common/grant_table.c:1909:d6v0 Expanding d6 grant table from 2 to 3 frames Oct 3 08:54:51.796929 [ 1911.989287] vif vif-6-0 vif6.0: Guest Rx ready Oct 3 08:54:51.832897 [ 1911.992682] IPv6: ADDRCONF(NETDEV_CHANGE): vif6.0: link becomes ready Oct 3 08:54:51.845036 [ 1911.999035] xenbr0: port 2(vif6.0) entered blocking state Oct 3 08:54:51.845058 [ 1912.004384] xenbr0: port 2(vif6.0) entered forwarding state Oct 3 08:54:51.860952 [ 1945.255564] xenbr0: port 2(vif6.0) entered disabled state Oct 3 08:55:25.105723 [ 1945.450566] xenbr0: port 2(vif6.0) entered disabled state Oct 3 08:55:25.297777 [ 1945.454929] device vif6.0 left promiscuous mode Oct 3 08:55:25.297838 [ 1945.459286] xenbr0: port 2(vif6.0) entered disabled state Oct 3 08:55:25.309731 [ 1971.123760] EXT4-fs (dm-2): unmounting filesystem. Oct 3 08:55:50.973607 [ 1972.395775] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 08:55:52.245646 [ 1972.526490] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 08:55:52.377619 [ 1973.016099] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 08:55:52.869812 [ 1973.033450] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 08:55:52.881608 [ 1980.839940] xenbr0: port 2(vif7.0) entered blocking state Oct 3 08:56:00.693764 [ 1980.843974] xenbr0: port 2(vif7.0) entered disabled state Oct 3 08:56:00.693841 [ 1980.849653] device vif7.0 entered promiscuous mode Oct 3 08:56:00.693890 (XEN) d7v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 08:56:04.897655 (XEN) d7v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 08:56:05.005795 (XEN) d7v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 08:56:05.053816 (XEN) common/grant_table.c:1909:d7v0 Expanding d7 grant table from 1 to 2 frames Oct 3 08:56:08.188998 (XEN) common/grant_table.c:1909:d7v0 Expanding d7 grant table from 2 to 3 frames Oct 3 08:56:08.200782 [ 1988.405141] vif vif-7-0 vif7.0: Guest Rx ready Oct 3 08:56:08.248825 [ 1988.408607] IPv6: ADDRCONF(NETDEV_CHANGE): vif7.0: link becomes ready Oct 3 08:56:08.260868 [ 1988.414987] xenbr0: port 2(vif7.0) entered blocking state Oct 3 08:56:08.260932 [ 1988.420252] xenbr0: port 2(vif7.0) entered forwarding state Oct 3 08:56:08.272782 [ 2021.636174] xenbr0: port 2(vif7.0) entered disabled state Oct 3 08:56:41.481813 [ 2021.879297] xenbr0: port 2(vif7.0) entered disabled state Oct 3 08:56:41.721768 [ 2021.883723] device vif7.0 left promiscuous mode Oct 3 08:56:41.733745 [ 2021.888006] xenbr0: port 2(vif7.0) entered disabled state Oct 3 08:56:41.733808 [ 2047.484253] EXT4-fs (dm-2): unmounting filesystem. Oct 3 08:57:07.321758 [ 2048.766111] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 08:57:08.617634 [ 2048.896803] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 08:57:08.737669 [ 2049.368680] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 08:57:09.217730 [ 2049.388797] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 08:57:09.229726 [ 2057.380727] xenbr0: port 2(vif8.0) entered blocking state Oct 3 08:57:17.229839 [ 2057.384761] xenbr0: port 2(vif8.0) entered disabled state Oct 3 08:57:17.229914 [ 2057.390439] device vif8.0 entered promiscuous mode Oct 3 08:57:17.229962 (XEN) d8v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 08:57:21.437060 (XEN) d8v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 08:57:21.545045 (XEN) d8v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 08:57:21.593031 (XEN) common/grant_table.c:1909:d8v0 Expanding d8 grant table from 1 to 2 frames Oct 3 08:57:24.593069 (XEN) common/grant_table.c:1909:d8v0 Expanding d8 grant table from 2 to 3 frames Oct 3 08:57:24.605064 [ 2064.825806] vif vif-8-0 vif8.0: Guest Rx ready Oct 3 08:57:24.676975 [ 2064.828995] IPv6: ADDRCONF(NETDEV_CHANGE): vif8.0: link becomes ready Oct 3 08:57:24.677073 [ 2064.838016] xenbr0: port 2(vif8.0) entered blocking state Oct 3 08:57:24.689035 [ 2064.842263] xenbr0: port 2(vif8.0) entered forwarding state Oct 3 08:57:24.689100 [ 2098.043721] xenbr0: port 2(vif8.0) entered disabled state Oct 3 08:57:57.885768 [ 2098.228410] xenbr0: port 2(vif8.0) entered disabled state Oct 3 08:57:58.077797 [ 2098.233075] device vif8.0 left promiscuous mode Oct 3 08:57:58.077822 [ 2098.237048] xenbr0: port 2(vif8.0) entered disabled state Oct 3 08:57:58.089720 [ 2123.953418] EXT4-fs (dm-2): unmounting filesystem. Oct 3 08:58:23.800834 [ 2125.203169] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 08:58:25.056797 [ 2125.333822] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 08:58:25.188763 [ 2125.803968] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 08:58:25.656833 [ 2125.824318] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 08:58:25.668817 [ 2133.486714] xenbr0: port 2(vif9.0) entered blocking state Oct 3 08:58:33.333675 [ 2133.490789] xenbr0: port 2(vif9.0) entered disabled state Oct 3 08:58:33.333675 [ 2133.496402] device vif9.0 entered promiscuous mode Oct 3 08:58:33.345618 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 08:58:37.473801 (XEN) d9v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 08:58:37.533773 (XEN) d9v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 08:58:37.653841 (XEN) d9v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 08:58:37.689758 (XEN) common/grant_table.c:1909:d9v1 Expanding d9 grant table from 1 to 2 frames Oct 3 08:58:40.737795 (XEN) common/grant_table.c:1909:d9v1 Expanding d9 grant table from 2 to 3 frames Oct 3 08:58:40.737870 [ 2140.974275] vif vif-9-0 vif9.0: Guest Rx ready Oct 3 08:58:40.821755 [ 2140.977901] IPv6: ADDRCONF(NETDEV_CHANGE): vif9.0: link becomes ready Oct 3 08:58:40.821820 [ 2140.984224] xenbr0: port 2(vif9.0) entered blocking state Oct 3 08:58:40.833731 [ 2140.989512] xenbr0: port 2(vif9.0) entered forwarding state Oct 3 08:58:40.833820 [ 2174.094053] xenbr0: port 2(vif9.0) entered disabled state Oct 3 08:59:13.941765 [ 2174.298047] xenbr0: port 2(vif9.0) entered disabled state Oct 3 08:59:14.145669 [ 2174.302595] device vif9.0 left promiscuous mode Oct 3 08:59:14.145712 [ 2174.306697] xenbr0: port 2(vif9.0) entered disabled state Oct 3 08:59:14.157677 [ 2200.275100] EXT4-fs (dm-2): unmounting filesystem. Oct 3 08:59:40.117719 [ 2201.517973] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 08:59:41.365590 [ 2201.648576] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 08:59:41.497592 [ 2202.136923] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 08:59:41.989700 [ 2202.158415] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 08:59:42.001665 [ 2210.090137] xenbr0: port 2(vif10.0) entered blocking state Oct 3 08:59:49.933848 [ 2210.094257] xenbr0: port 2(vif10.0) entered disabled state Oct 3 08:59:49.933928 [ 2210.100007] device vif10.0 entered promiscuous mode Oct 3 08:59:49.945703 (XEN) d10v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 08:59:54.133783 (XEN) d10v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 08:59:54.253747 (XEN) d10v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 08:59:54.289954 (XEN) common/grant_table.c:1909:d10v1 Expanding d10 grant table from 1 to 2 frames Oct 3 08:59:57.389753 (XEN) common/grant_table.c:1909:d10v1 Expanding d10 grant table from 2 to 3 frames Oct 3 08:59:57.401724 [ 2217.638201] vif vif-10-0 vif10.0: Guest Rx ready Oct 3 08:59:57.485893 [ 2217.641676] IPv6: ADDRCONF(NETDEV_CHANGE): vif10.0: link becomes ready Oct 3 08:59:57.485959 [ 2217.648231] xenbr0: port 2(vif10.0) entered blocking state Oct 3 08:59:57.497748 [ 2217.653770] xenbr0: port 2(vif10.0) entered forwarding state Oct 3 08:59:57.497811 [ 2250.550354] xenbr0: port 2(vif10.0) entered disabled state Oct 3 09:00:30.389789 [ 2250.769495] xenbr0: port 2(vif10.0) entered disabled state Oct 3 09:00:30.605725 [ 2250.774035] device vif10.0 left promiscuous mode Oct 3 09:00:30.617762 [ 2250.778359] xenbr0: port 2(vif10.0) entered disabled state Oct 3 09:00:30.617824 [ 2276.495941] EXT4-fs (dm-2): unmounting filesystem. Oct 3 09:00:56.337781 [ 2277.766086] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 09:00:57.609872 [ 2277.896700] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 09:00:57.741840 [ 2278.603342] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 09:00:58.449874 [ 2278.620404] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 09:00:58.461833 [ 2286.434970] xenbr0: port 2(vif11.0) entered blocking state Oct 3 09:01:06.277862 [ 2286.439184] xenbr0: port 2(vif11.0) entered disabled state Oct 3 09:01:06.289641 [ 2286.444829] device vif11.0 entered promiscuous mode Oct 3 09:01:06.289641 (XEN) d11v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 09:01:10.489673 (XEN) d11v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 09:01:10.609733 (XEN) d11v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 09:01:10.645746 (XEN) common/grant_table.c:1909:d11v0 Expanding d11 grant table from 1 to 2 frames Oct 3 09:01:13.721784 (XEN) common/grant_table.c:1909:d11v0 Expanding d11 grant table from 2 to 3 frames Oct 3 09:01:13.733724 [ 2293.943455] vif vif-11-0 vif11.0: Guest Rx ready Oct 3 09:01:13.781791 [ 2293.946762] IPv6: ADDRCONF(NETDEV_CHANGE): vif11.0: link becomes ready Oct 3 09:01:13.793807 [ 2293.953520] xenbr0: port 2(vif11.0) entered blocking state Oct 3 09:01:13.793869 [ 2293.961524] xenbr0: port 2(vif11.0) entered forwarding state Oct 3 09:01:13.805736 [ 2327.053659] xenbr0: port 2(vif11.0) entered disabled state Oct 3 09:01:46.896865 [ 2327.289303] xenbr0: port 2(vif11.0) entered disabled state Oct 3 09:01:47.136924 [ 2327.293847] device vif11.0 left promiscuous mode Oct 3 09:01:47.136974 [ 2327.298165] xenbr0: port 2(vif11.0) entered disabled state Oct 3 09:01:47.148875 [ 2353.151915] EXT4-fs (dm-2): unmounting filesystem. Oct 3 09:02:12.996819 [ 2354.403148] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 09:02:14.252825 [ 2354.533737] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 09:02:14.388814 [ 2355.018188] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 09:02:14.868852 [ 2355.039521] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 09:02:14.880951 [ 2363.189423] xenbr0: port 2(vif12.0) entered blocking state Oct 3 09:02:23.037787 [ 2363.193546] xenbr0: port 2(vif12.0) entered disabled state Oct 3 09:02:23.037862 [ 2363.199327] device vif12.0 entered promiscuous mode Oct 3 09:02:23.049696 (XEN) d12v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 09:02:27.240826 (XEN) d12v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 09:02:27.360918 (XEN) d12v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 09:02:27.396910 (XEN) common/grant_table.c:1909:d12v0 Expanding d12 grant table from 1 to 2 frames Oct 3 09:02:30.476947 (XEN) common/grant_table.c:1909:d12v0 Expanding d12 grant table from 2 to 3 frames Oct 3 09:02:30.476991 [ 2370.693351] vif vif-12-0 vif12.0: Guest Rx ready Oct 3 09:02:30.536937 [ 2370.696758] IPv6: ADDRCONF(NETDEV_CHANGE): vif12.0: link becomes ready Oct 3 09:02:30.548910 [ 2370.703589] xenbr0: port 2(vif12.0) entered blocking state Oct 3 09:02:30.548945 [ 2370.708844] xenbr0: port 2(vif12.0) entered forwarding state Oct 3 09:02:30.548973 [ 2404.694968] xenbr0: port 2(vif12.0) entered disabled state Oct 3 09:03:04.529806 [ 2404.909229] xenbr0: port 2(vif12.0) entered disabled state Oct 3 09:03:04.745804 [ 2404.913769] device vif12.0 left promiscuous mode Oct 3 09:03:04.757687 [ 2404.918093] xenbr0: port 2(vif12.0) entered disabled state Oct 3 09:03:04.757716 [ 2431.364482] EXT4-fs (dm-2): unmounting filesystem. Oct 3 09:03:31.201739 [ 2432.918099] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 09:03:32.761833 [ 2433.048627] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 09:03:32.893723 [ 2433.935504] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 09:03:33.781816 [ 2433.953719] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 09:03:33.793719 [ 2441.639385] xenbr0: port 2(vif13.0) entered blocking state Oct 3 09:03:41.477726 [ 2441.643507] xenbr0: port 2(vif13.0) entered disabled state Oct 3 09:03:41.489654 [ 2441.649286] device vif13.0 entered promiscuous mode Oct 3 09:03:41.489688 (XEN) d13v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 09:03:45.700840 (XEN) d13v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 09:03:45.820832 (XEN) d13v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 09:03:45.856833 (XEN) common/grant_table.c:1909:d13v0 Expanding d13 grant table from 1 to 2 frames Oct 3 09:03:48.941825 (XEN) common/grant_table.c:1909:d13v0 Expanding d13 grant table from 2 to 3 frames Oct 3 09:03:48.953700 [ 2449.184454] vif vif-13-0 vif13.0: Guest Rx ready Oct 3 09:03:49.025772 [ 2449.188399] IPv6: ADDRCONF(NETDEV_CHANGE): vif13.0: link becomes ready Oct 3 09:03:49.037737 [ 2449.194445] xenbr0: port 2(vif13.0) entered blocking state Oct 3 09:03:49.049766 [ 2449.206731] xenbr0: port 2(vif13.0) entered forwarding state Oct 3 09:03:49.049831 [ 2482.754504] xenbr0: port 2(vif13.0) entered disabled state Oct 3 09:04:22.597922 [ 2482.878014] xenbr0: port 2(vif13.0) entered disabled state Oct 3 09:04:22.717778 [ 2482.882469] device vif13.0 left promiscuous mode Oct 3 09:04:22.717840 [ 2482.886826] xenbr0: port 2(vif13.0) entered disabled state Oct 3 09:04:22.729716 [ 2486.254659] EXT4-fs (dm-2): unmounting filesystem. Oct 3 09:04:26.089793 Oct 3 09:04:49.854012 Oct 3 09:04:50.260049 (XEN) *** Serial input to Xen (type 'CTRL-x' three times to switch input) Oct 3 09:04:50.281670 Oct 3 09:04:50.930253 (XEN) '0' pressed -> dumping Dom0's registers Oct 3 09:04:50.953779 (XEN) *** Dumping Dom0 vcpu#0 state: *** Oct 3 09:04:50.953841 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Oct 3 09:04:50.956263 Not tainted ]---- Oct 3 09:04:50.965658 (XEN) CPU: 0 Oct 3 09:04:50.965690 (XEN) PC: c031ce28 Oct 3 09:04:50.965713 (XEN) CPSR: 60030093 MODE:32-bit Guest SVC Oct 3 09:04:50.965739 (XEN) R0: 00000005 R1: 00000000 R2: 007a6671 R3: c031ce20 Oct 3 09:04:50.977717 (XEN) R4: c1909d80 R5: c1b12200 R6: c1904d1c R7: c1904d78 Oct 3 09:04:50.977773 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c00 Oct 3 09:04:50.989744 (XEN) USR: SP: bea73118 LR: b6a3306d Oct 3 09:04:50.989799 (XEN) SVC: SP: c1901f40 LR: c0308df0 SPSR:60030013 Oct 3 09:04:50.989847 (XEN) ABT: SP: c1b22b10 LR: c0300ea0 SPSR:600f0193 Oct 3 09:04:51.001708 (XEN) UND: SP: c1b22b20 LR: c0300fa0 SPSR:60030093 Oct 3 09:04:51.001742 (XEN) IRQ: SP: c1b22b00 LR: c0300ba0 SPSR:60030193 Oct 3 09:04:51.013727 (XEN) FIQ: SP: c1b22b30 LR: c1b22b30 SPSR:00000000 Oct 3 09:04:51.013788 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 09:04:51.013839 (XEN) Oct 3 09:04:51.025740 (XEN) SCTLR: 10c5387d Oct 3 09:04:51.025798 (XEN) TCR: 00000000 Oct 3 09:04:51.025843 (XEN) TTBR0: 0000000063a6c06a Oct 3 09:04:51.025887 (XEN) TTBR1: 000000006020406a Oct 3 09:04:51.025930 (XEN) IFAR: b6e6c814, IFSR: 00000007 Oct 3 09:04:51.037754 (XEN) DFAR: 004f8318, DFSR: 0000081f Oct 3 09:04:51.037812 (XEN) Oct 3 09:04:51.037853 (XEN) VTCR_EL2: 80003558 Oct 3 09:04:51.037897 (XEN) VTTBR_EL2: 00010000bef8a000 Oct 3 09:04:51.049803 (XEN) Oct 3 09:04:51.049859 (XEN) SCTLR_EL2: 30cd187f Oct 3 09:04:51.049905 (XEN) HCR_EL2: 007c663f Oct 3 09:04:51.049948 (XEN) TTBR0_EL2: 000000004111d000 Oct 3 09:04:51.049991 (XEN) Oct 3 09:04:51.050030 (XEN) ESR_EL2: 07e00000 Oct 3 09:04:51.061731 (XEN) HPFAR_EL2: 00104810 Oct 3 09:04:51.061783 (XEN) HDFAR: e0807f00 Oct 3 09:04:51.061827 (XEN) HIFAR: c141f698 Oct 3 09:04:51.061870 (XEN) Oct 3 09:04:51.061910 (XEN) Guest stack trace from sp=c1901f40: Oct 3 09:04:51.073731 (XEN) Failed to convert stack to physical address Oct 3 09:04:51.073796 (XEN) *** Dumping Dom0 vcpu#1 state: *** Oct 3 09:04:51.073843 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 09:04:51.085762 (XEN) CPU: 0 Oct 3 09:04:51.085821 (XEN) PC: c031ce28 Oct 3 09:04:51.085864 (XEN) CPSR: 600d0093 MODE:32-bit Guest SVC Oct 3 09:04:51.085911 (XEN) R0: 00000005 R1: 00000000 R2: 00556d69 R3: c031ce20 Oct 3 09:04:51.097773 (XEN) R4: c210e600 R5: c1b12200 R6: c1904d1c R7: c1904d78 Oct 3 09:04:51.097838 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c00 Oct 3 09:04:51.109780 (XEN) USR: SP: bebfe948 LR: b6c28893 Oct 3 09:04:51.109842 (XEN) SVC: SP: e08c9f90 LR: c0308df0 SPSR:600d0013 Oct 3 09:04:51.109891 (XEN) ABT: SP: c1b22b50 LR: c0300ea0 SPSR:60070193 Oct 3 09:04:51.121670 (XEN) UND: SP: c1b22b60 LR: c0300fa0 SPSR:600d0093 Oct 3 09:04:51.121745 (XEN) IRQ: SP: c1b22b40 LR: c0300ba0 SPSR:600d0193 Oct 3 09:04:51.133737 (XEN) FIQ: SP: c1b22b70 LR: c1b22b70 SPSR:00000000 Oct 3 09:04:51.133775 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 09:04:51.145762 (XEN) Oct 3 09:04:51.145815 (XEN) SCTLR: 10c5387d Oct 3 09:04:51.145858 (XEN) TCR: 00000000 Oct 3 09:04:51.145899 (XEN) TTBR0: 000000006593406a Oct 3 09:04:51.145942 (XEN) TTBR1: 000000006020406a Oct 3 09:04:51.157720 (XEN) IFAR: b6f2102c, IFSR: 00000007 Oct 3 09:04:51.157780 (XEN) DFAR: b6c0f000, DFSR: 0000081f Oct 3 09:04:51.157832 (XEN) Oct 3 09:04:51.157857 (XEN) VTCR_EL2: 80003558 Oct 3 09:04:51.157880 (XEN) VTTBR_EL2: 00010000bef8a000 Oct 3 09:04:51.169750 (XEN) Oct 3 09:04:51.169802 (XEN) SCTLR_EL2: 30cd187f Oct 3 09:04:51.169846 (XEN) HCR_EL2: 007c663f Oct 3 09:04:51.169888 (XEN) TTBR0_EL2: 000000004111d000 Oct 3 09:04:51.169930 (XEN) Oct 3 09:04:51.169968 (XEN) ESR_EL2: 07e00000 Oct 3 09:04:51.181747 (XEN) HPFAR_EL2: 00104810 Oct 3 09:04:51.181803 (XEN) HDFAR: e0807f00 Oct 3 09:04:51.181847 (XEN) HIFAR: c141f698 Oct 3 09:04:51.181889 (XEN) Oct 3 09:04:51.181927 (XEN) Guest stack trace from sp=e08c9f90: Oct 3 09:04:51.193709 (XEN) Failed to convert stack to physical address Oct 3 09:04:51.193769 Oct 3 09:04:52.948066 (XEN) 'H' pressed -> dumping heap info (now = 2518423334291) Oct 3 09:04:52.977660 (XEN) heap[node=0][zone=0] -> 16279 pages Oct 3 09:04:52.977690 (XEN) heap[node=0][zone=1] -> Oct 3 09:04:52.978967 0 pages Oct 3 09:04:52.989642 (XEN) heap[node=0][zone=2] -> 0 pages Oct 3 09:04:52.989674 (XEN) heap[node=0][zone=3] -> 0 pages Oct 3 09:04:52.989699 (XEN) heap[node=0][zone=4] -> 0 pages Oct 3 09:04:52.989722 (XEN) heap[node=0][zone=5] -> 0 pages Oct 3 09:04:53.001647 (XEN) heap[node=0][zone=6] -> 0 pages Oct 3 09:04:53.001680 (XEN) heap[node=0][zone=7] -> 0 pages Oct 3 09:04:53.001704 (XEN) heap[node=0][zone=8] -> 0 pages Oct 3 09:04:53.013694 (XEN) heap[node=0][zone=9] -> 0 pages Oct 3 09:04:53.013727 (XEN) heap[node=0][zone=10] -> 0 pages Oct 3 09:04:53.013751 (XEN) heap[node=0][zone=11] -> 0 pages Oct 3 09:04:53.013775 (XEN) heap[node=0][zone=12] -> 0 pages Oct 3 09:04:53.025651 (XEN) heap[node=0][zone=13] -> 0 pages Oct 3 09:04:53.025683 (XEN) heap[node=0][zone=14] -> 0 pages Oct 3 09:04:53.025708 (XEN) heap[node=0][zone=15] -> 0 pages Oct 3 09:04:53.037639 (XEN) heap[node=0][zone=16] -> 0 pages Oct 3 09:04:53.037671 (XEN) heap[node=0][zone=17] -> 0 pages Oct 3 09:04:53.037696 (XEN) heap[node=0][zone=18] -> 0 pages Oct 3 09:04:53.037720 (XEN) heap[node=0][zone=19] -> 130813 pages Oct 3 09:04:53.049647 (XEN) heap[node=0][zone=20] -> 241597 pages Oct 3 09:04:53.049679 (XEN) heap[node=0][zone=21] -> 0 pages Oct 3 09:04:53.049704 (XEN) heap[node=0][zone=22] -> 0 pages Oct 3 09:04:53.061641 (XEN) heap[node=0][zone=23] -> 0 pages Oct 3 09:04:53.061673 (XEN) heap[node=0][zone=24] -> 0 pages Oct 3 09:04:53.061698 (XEN) heap[node=0][zone=25] -> 0 pages Oct 3 09:04:53.073690 (XEN) heap[node=0][zone=26] -> 0 pages Oct 3 09:04:53.073723 (XEN) heap[node=0][zone=27] -> 0 pages Oct 3 09:04:53.073748 (XEN) heap[node=0][zone=28] -> 0 pages Oct 3 09:04:53.073771 Oct 3 09:04:55.162223 Oct 3 09:04:56.288859 Oct 3 09:04:56.791244 Oct 3 09:04:58.335356 Oct 3 09:04:59.006571 (XEN) Dumping timer queues: Oct 3 09:04:59.025782 (XEN) CPU00: Oct 3 09:04:59.025875 (XEN) ex= 649us timer=43fdc968 cb=a Oct 3 09:04:59.027632 rch/arm/vtimer.c#virt_timer_expired(43fdc960) Oct 3 09:04:59.037641 (XEN) CPU01: Oct 3 09:04:59.037641 (XEN) ex= 45907us timer=43fee968 cb=arch/arm/vtimer.c#virt_timer_expired(43fee960) Oct 3 09:04:59.049713 Oct 3 09:05:00.831127 Oct 3 09:05:02.375990 Oct 3 09:05:02.898842 (XEN) 'd' pressed -> dumping registers Oct 3 09:05:02.921062 (XEN) Oct 3 09:05:02.921103 (XEN) *** Dumping CPU0 host state: *** Oct 3 09:05:02.921128 (XEN) ----[ Xen-4.20-unstable arm32 debug=y N Oct 3 09:05:02.923799 ot tainted ]---- Oct 3 09:05:02.932980 (XEN) CPU: 0 Oct 3 09:05:02.933029 (XEN) PC: 00269e8c arch/arm/domain.c#idle_loop+0x134/0x1b0 Oct 3 09:05:02.933056 (XEN) CPSR: 6003005a MODE:Hypervisor Oct 3 09:05:02.945072 (XEN) R0: 00000000 R1: 00000001 R2: 00000000 R3: 00000000 Oct 3 09:05:02.945115 (XEN) R4: 00000000 R5: 00310108 R6: 0034333c R7: 00000001 Oct 3 09:05:02.945142 (XEN) R8: 00340108 R9: 00000000 R10:40e00000 R11:4003ff54 R12:fffffffc Oct 3 09:05:02.957022 (XEN) HYP: SP: 4003ff44 LR: 0022c2d0 Oct 3 09:05:02.957077 (XEN) Oct 3 09:05:02.957099 (XEN) VTCR_EL2: 80003558 Oct 3 09:05:02.969029 (XEN) VTTBR_EL2: 00010000bef8a000 Oct 3 09:05:02.969086 (XEN) Oct 3 09:05:02.969108 (XEN) SCTLR_EL2: 30cd187f Oct 3 09:05:02.969132 (XEN) HCR_EL2: 007c663f Oct 3 09:05:02.969154 (XEN) TTBR0_EL2: 000000004111d000 Oct 3 09:05:02.981028 (XEN) Oct 3 09:05:02.981085 (XEN) ESR_EL2: 07e00000 Oct 3 09:05:02.981110 (XEN) HPFAR_EL2: 00104810 Oct 3 09:05:02.981133 (XEN) HDFAR: e0807f00 Oct 3 09:05:02.981156 (XEN) HIFAR: c141f698 Oct 3 09:05:02.981179 (XEN) Oct 3 09:05:02.981200 (XEN) Xen stack trace from sp=4003ff44: Oct 3 09:05:02.993039 (XEN) 07e00000 002ac008 002a102c 4003ff4c 00272664 00000000 00000000 00000000 Oct 3 09:05:02.993095 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 09:05:03.004915 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 09:05:03.016911 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 09:05:03.016947 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 09:05:03.028947 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 09:05:03.028982 (XEN) Xen call trace: Oct 3 09:05:03.029007 (XEN) [<00269e8c>] arch/arm/domain.c#idle_loop+0x134/0x1b0 (PC) Oct 3 09:05:03.041069 (XEN) [<0022c2d0>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 09:05:03.041139 (XEN) [<00272664>] arch_get_xen_caps+0/0x90 Oct 3 09:05:03.053050 (XEN) Oct 3 09:05:03.053123 (XEN) *** Dumping CPU1 host state: *** Oct 3 09:05:03.053165 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 09:05:03.053208 (XEN) CPU: 1 Oct 3 09:05:03.065023 (XEN) PC: 00269e8c arch/arm/domain.c#idle_loop+0x134/0x1b0 Oct 3 09:05:03.065080 (XEN) CPSR: 600f005a MODE:Hypervisor Oct 3 09:05:03.065105 (XEN) R0: 00000000 R1: 00000001 R2: 3fcf6000 R3: 00000000 Oct 3 09:05:03.077005 (XEN) R4: 00000001 R5: 00310108 R6: 0034333c R7: 00000002 Oct 3 09:05:03.077055 (XEN) R8: 00340108 R9: 00000001 R10:40e00000 R11:4000ff54 R12:fffffffc Oct 3 09:05:03.088994 (XEN) HYP: SP: 4000ff44 LR: 0022c2d0 Oct 3 09:05:03.089046 (XEN) Oct 3 09:05:03.089068 (XEN) VTCR_EL2: 80003558 Oct 3 09:05:03.089092 (XEN) VTTBR_EL2: 00010000bef8a000 Oct 3 09:05:03.100944 (XEN) Oct 3 09:05:03.100974 (XEN) SCTLR_EL2: 30cd187f Oct 3 09:05:03.100999 (XEN) HCR_EL2: 007c663f Oct 3 09:05:03.101021 (XEN) TTBR0_EL2: 00000000ba004000 Oct 3 09:05:03.101045 (XEN) Oct 3 09:05:03.101068 (XEN) ESR_EL2: 07e00000 Oct 3 09:05:03.113002 (XEN) HPFAR_EL2: 00104810 Oct 3 09:05:03.113036 (XEN) HDFAR: e0807f00 Oct 3 09:05:03.113062 (XEN) HIFAR: c0c0a630 Oct 3 09:05:03.113085 (XEN) Oct 3 09:05:03.113106 (XEN) Xen stack trace from sp=4000ff44: Oct 3 09:05:03.124968 (XEN) 07e00000 00311390 00000001 4000ff3c 00272f48 00000000 00000000 00000000 Oct 3 09:05:03.125005 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 09:05:03.136943 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 09:05:03.136977 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 09:05:03.148954 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 09:05:03.148989 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 09:05:03.160956 (XEN) Xen call trace: Oct 3 09:05:03.160987 (XEN) [<00269e8c>] arch/arm/domain.c#idle_loop+0x134/0x1b0 (PC) Oct 3 09:05:03.172955 (XEN) [<0022c2d0>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 09:05:03.172988 (XEN) [<00272f48>] start_secondary+0x208/0x20c Oct 3 09:05:03.173015 (XEN) Oct 3 09:05:03.173037 Oct 3 09:05:05.226419 (XEN) 'e' pressed -> dumping event-channel info Oct 3 09:05:05.249877 (XEN) Event channel information for domain 0: Oct 3 09:05:05.249937 (XEN) Polling vCPUs: {} Oct 3 09:05:05.249981 (XEN) port Oct 3 09:05:05.252166 [p/m/s] Oct 3 09:05:05.261870 (XEN) 1 [0/0/ - ]: s=3 n=1 x=0 d=0 p=4 Oct 3 09:05:05.261933 (XEN) 2 [0/0/ - ]: s=5 n=0 x=0 v=2 Oct 3 09:05:05.261977 (XEN) 3 [0/0/ - ]: s=5 n=1 x=0 v=3 Oct 3 09:05:05.273925 (XEN) 4 [0/0/ - ]: s=3 n=0 x=0 d=0 p=1 Oct 3 09:05:05.273986 Oct 3 09:05:06.846207 (XEN) gnttab_usage_print_all [ key 'g' pressed Oct 3 09:05:06.869750 (XEN) -------- active -------- -------- shared -------- Oct 3 09:05:06.869802 (XEN) [ref] locald Oct 3 09:05:06.871061 om mfn pin localdom gmfn flags Oct 3 09:05:06.881751 (XEN) grant-table for remote d0 (v1) Oct 3 09:05:06.881806 (XEN) 1 frames (64 max), 2 maptrack frames (1024 max) Oct 3 09:05:06.893648 (XEN) no active grant table entries Oct 3 09:05:06.893692 (XEN) gnttab_usage_print_all ] done Oct 3 09:05:06.893717 Oct 3 09:05:08.633242 Oct 3 09:05:10.404830 Oct 3 09:05:10.741754 (XEN) Physical memory information: Oct 3 09:05:10.757902 (XEN) Xen heap: 65116kB free Oct 3 09:05:10.757974 (XEN) heap[19]: 523252kB free Oct 3 09:05:10.758007 (XEN) heap[20]: 966388kB fr Oct 3 09:05:10.759239 ee Oct 3 09:05:10.769689 (XEN) Dom heap: 1489640kB free Oct 3 09:05:10.769748 Oct 3 09:05:12.628353 Oct 3 09:05:14.418836 Oct 3 09:05:14.629701 (XEN) sched_smt_power_savings: disabled Oct 3 09:05:14.649995 (XEN) NOW=2540095745041 Oct 3 09:05:14.650060 (XEN) Online Cpus: 0-1 Oct 3 09:05:14.650087 (XEN) Cpupool 0: Oct 3 09:05:14.650087 (XEN) Cpus: 0-1 Oct 3 09:05:14.650087 (XEN) Sched Oct 3 09:05:14.652364 uling granularity: cpu, 1 CPU per sched-resource Oct 3 09:05:14.661817 (XEN) Scheduler: SMP Credit Scheduler rev2 (credit2) Oct 3 09:05:14.661817 (XEN) Active queues: 1 Oct 3 09:05:14.661817 (XEN) default-weight = 256 Oct 3 09:05:14.673916 (XEN) Runqueue 0: Oct 3 09:05:14.673995 (XEN) ncpus = 2 Oct 3 09:05:14.673995 (XEN) cpus = 0-1 Oct 3 09:05:14.673995 (XEN) max_weight = 256 Oct 3 09:05:14.685922 (XEN) pick_bias = 0 Oct 3 09:05:14.685991 (XEN) instload = 0 Oct 3 09:05:14.686042 (XEN) aveload = 2042 (~0%) Oct 3 09:05:14.686069 (XEN) idlers: 2 Oct 3 09:05:14.686069 (XEN) tickled: 0 Oct 3 09:05:14.697969 (XEN) fully idle cores: 2 Oct 3 09:05:14.697986 (XEN) Domain info: Oct 3 09:05:14.697986 (XEN) Domain: 0 w 256 c 0 v 2 Oct 3 09:05:14.698004 (XEN) 1: [0.0] flags=0 cpu=1 credit=7119176 [w=256] load=1952 (~0%) Oct 3 09:05:14.709906 (XEN) 2: [0.1] flags=0 cpu=0 credit=10295833 [w=256] load=162 (~0%) Oct 3 09:05:14.709906 (XEN) Runqueue 0: Oct 3 09:05:14.709906 (XEN) CPU[00] runq=0, sibling={0}, core={0-1} Oct 3 09:05:14.721953 (XEN) CPU[01] runq=0, sibling={1}, core={0-1} Oct 3 09:05:14.722031 (XEN) RUNQ: Oct 3 09:05:14.722078 (XEN) CPUs info: Oct 3 09:05:14.722134 (XEN) CPU[00] current=d[IDLE]v0, curr=d[IDLE]v0, prev=NULL Oct 3 09:05:14.734035 (XEN) CPU[01] current=d[IDLE]v1, curr=d[IDLE]v1, prev=NULL Oct 3 09:05:14.734068 Oct 3 09:05:16.665142 Oct 3 09:05:18.427763 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 09:05:18.557711 Oct 3 09:05:18.667081 (XEN) Synced stime skew: max=125ns avg=125ns samples=1 current=125ns Oct 3 09:05:18.689851 (XEN) Synced cycles skew: max=1 avg=1 samples=1 current=1 Oct 3 09:05:18.689950 Oct 3 09:05:18.692118 Oct 3 09:05:20.671148 Oct 3 09:05:22.440026 Oct 3 09:05:22.658316 Oct 3 09:05:24.443975 Oct 3 09:05:24.683502 Oct 3 09:05:26.450500 Oct 3 09:05:36.691701 (XEN) 'q' pressed -> dumping domain info (now = 2562151782916) Oct 3 09:05:36.706140 (XEN) General information for domain 0: Oct 3 09:05:36.706215 (XEN) refcnt=3 dying=0 paus Oct 3 09:05:36.708397 e_count=0 Oct 3 09:05:36.717788 (XEN) nr_pages=131072 xenheap_pages=2 dirty_cpus={} max_pages=131072 Oct 3 09:05:36.717823 (XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=00000020 Oct 3 09:05:36.729798 (XEN) p2m mappings for domain 0 (vmid 1): Oct 3 09:05:36.729831 (XEN) 1G mappings: 0 (shattered 0) Oct 3 09:05:36.729857 (XEN) 2M mappings: 227 (shattered 29) Oct 3 09:05:36.741871 (XEN) 4K mappings: 7522 Oct 3 09:05:36.741903 (XEN) Rangesets belonging to domain 0: Oct 3 09:05:36.741929 (XEN) Interrupts { 32-72, 74, 77-79, 82-84, 86, 88-100, 103-104, 107-110, 114, 116-120, 123, 126-128, 138, 144, 146-147, 149-151, 156 } Oct 3 09:05:36.757880 (XEN) I/O Memory { 2020-2050, 3810-3811, 3830-3831, 3860-3861, 10000-10001, 10010-10045, 10050-10055, 10060-10061, 101b0-101b1, 101d0-101d1, 101e0-101e1, 10440-10441, 10800-10801, 10830-10831, 10850-10851, 10a60-10a61, 10d10-10d11, 11000-11010, 11200-11201, 11210-11211, 11400-11401, 11800-11805, 11c00-11c01, 11c10-11c11, 11d40-11d41, 11f20-11f21, 12000-12010, 12100-12101, 12110-12111, 12120-12121, 12130-12131, 12170-12171, 121a0-121a1, 121b0-121b1, 121d0-121d1, 12200-12201, 12210-12211, 12220-12221, 12230-12231, 12250-12251, 122f0-122f1, 12c00-12c01, 12c10-12c11, 12c30-12c31, 12c60-12c61, 12c70-12c71, 12c80-12c81, 12c90-12c91, 12ca0-12ca1, 12cb0-12cb1, 12cc0-12cc1, 12cd0-12cd1, 12ce0-12ce1, 12d10-12d11, 12d20-12d21, 12d30-12d31, 12d40-12d41, 12d60-12d61, 12d70-12d71, 12dd0-12dd1, 13260-13261, 13270-13271, 13280-13281, 13290-13291, 132a0-132a1, 132b0-132b1, 132c0-132c1, 132d0-132d1, 132e0-132e1, 132f0-132f1, 13400-13401, 13c40-13c41, 13c50-13c51, 13e00-13e01, 13e10-13e11, 13e20-13e21, 13e30-13e31, 13e80-13e81, 13e90-13e91, 13ea0-13ea1, 13eb0-13eb1, 14400-14440, 14450-14460, 14500-14510, 14530-145a0, 145b0-145b1, 14640-14641, 14650-14651 } Oct 3 09:05:36.853606 (XEN) NODE affinity for domain 0: [0] Oct 3 09:05:36.853606 (XEN) VCPU information and callbacks for domain 0: Oct 3 09:05:36.865611 (XEN) UNIT0 affinities: hard={0-1} soft={0-1} Oct 3 09:05:36.865611 (XEN) VCPU0: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 09:05:36.877602 (XEN) pause_count=0 pause_flags=1 Oct 3 09:05:36.877602 (XEN) GICH_LRs (vcpu 0) mask=0 Oct 3 09:05:36.877602 (XEN) VCPU_LR[0]=0 Oct 3 09:05:36.877602 (XEN) VCPU_LR[1]=0 Oct 3 09:05:36.877602 (XEN) VCPU_LR[2]=0 Oct 3 09:05:36.889607 (XEN) VCPU_LR[3]=0 Oct 3 09:05:36.889607 (XEN) No periodic timer Oct 3 09:05:36.889607 (XEN) UNIT1 affinities: hard={0-1} soft={0-1} Oct 3 09:05:36.889607 (XEN) VCPU1: CPU0 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 09:05:36.901605 (XEN) pause_count=0 pause_flags=1 Oct 3 09:05:36.901605 (XEN) GICH_LRs (vcpu 1) mask=0 Oct 3 09:05:36.901605 (XEN) VCPU_LR[0]=0 Oct 3 09:05:36.913675 (XEN) VCPU_LR[1]=0 Oct 3 09:05:36.913675 (XEN) VCPU_LR[2]=0 Oct 3 09:05:36.913675 (XEN) VCPU_LR[3]=0 Oct 3 09:05:36.913675 (XEN) No periodic timer Oct 3 09:05:36.913675 (XEN) Notifying guest 0:0 (virq 1, port 0) Oct 3 09:05:36.925621 (XEN) Notifying guest 0:1 (virq 1, port 0) Oct 3 09:05:36.925621 Oct 3 09:05:48.706440 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 09:05:48.725124 Oct 3 09:05:48.725206 arndale-westfield login: Oct 3 09:05:48.727336 [ 2660.318090] sd 0:0:0:0: [sda] Synchronizing SCSI cache Oct 3 09:07:20.161692 [ 2660.326511] wake enabled for irq 119 (gpx1-4) Oct 3 09:07:20.161733 [ 2660.329548] wake enabled for irq 120 (gpx1-5) Oct 3 09:07:20.173714 [ 2660.333937] wake enabled for irq 121 (gpx1-6) Oct 3 09:07:20.173749 [ 2660.338369] wake enabled for irq 122 (gpx1-7) Oct 3 09:07:20.185693 [ 2660.342779] wake enabled for irq 123 (gpx2-0) Oct 3 09:07:20.185728 [ 2660.347206] wake enabled for irq 124 (gpx2-1) Oct 3 09:07:20.185754 [ 2660.352063] reboot: Resô Oct 3 09:07:20.521679 Oct 3 09:07:20.521706 Oct 3 09:07:20.521751 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 09:07:20.533710 Oct 3 09:07:20.533739 CPU: Exynos5250@1000MHz Oct 3 09:07:20.533764 Oct 3 09:07:20.533786 Board: Arndale Oct 3 09:07:20.533808 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 09:07:20.545596 ready Oct 3 09:07:20.545625 DRAM: 2 GiB Oct 3 09:07:20.545649 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 09:07:20.557681 trace: enabled Oct 3 09:07:20.593643 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 09:07:20.953698 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 09:07:21.013701 In: serial Oct 3 09:07:21.013731 Out: serial Oct 3 09:07:21.013754 Err: serial Oct 3 09:07:21.013776 SCSI: ARNDALE SCSI INIT Oct 3 09:07:21.025685 Target spinup took 0 ms. Oct 3 09:07:21.025716 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 09:07:21.025744 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 09:07:21.037686 Net: Net Initialization Skipped Oct 3 09:07:21.037718 No ethernet found. Oct 3 09:07:21.037742 Hostname: arndale-westfield Oct 3 09:07:21.049660 Hit any key to stop autoboot: 2  1  0 Oct 3 09:07:22.961714 (Re)start USB... Oct 3 09:07:22.973635 USB0: USB EHCI 1.00 Oct 3 09:07:22.973667 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 09:07:28.572880 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 09:07:28.572880 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 09:07:29.020743 Waiting for Ethernet connection... done. Oct 3 09:07:30.665766 BOOTP broadcast 1 Oct 3 09:07:30.665826 BOOTP broadcast 2 Oct 3 09:07:32.249722 DHCP client bound to address 10.149.64.45 (1668 ms) Oct 3 09:07:32.273762 Using asx0 device Oct 3 09:07:32.273802 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 09:07:32.285734 Filename 'pxelinux.0'. Oct 3 09:07:32.285757 Load address: 0x43e00000 Oct 3 09:07:32.285802 Loading: *### Oct 3 09:07:32.345718 591.8 KiB/s Oct 3 09:07:32.357711 done Oct 3 09:07:32.357724 Bytes transferred = 42430 (a5be hex) Oct 3 09:07:32.357763 missing environment variable: pxeuuid Oct 3 09:07:32.357802 Retrieving file: pxelinux.cfg/0A95402D Oct 3 09:07:32.357842 Using asx0 device Oct 3 09:07:32.369798 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 09:07:32.369808 Filename 'pxelinux.cfg/0A95402D'. Oct 3 09:07:32.369854 Load address: 0x51000000 Oct 3 09:07:32.369896 Loading: *# Oct 3 09:07:32.381918 355.5 KiB/s Oct 3 09:07:32.381953 done Oct 3 09:07:32.381953 Bytes transferred = 728 (2d8 hex) Oct 3 09:07:32.381953 Config file found Oct 3 09:07:32.381953 Ignoring unknown command: serial Oct 3 09:07:32.381990 1: ^Overwrite Oct 3 09:07:32.393829 Retrieving file: /osstest/tmp//arndale-westfield--initrd.gz Oct 3 09:07:32.393829 Using asx0 device Oct 3 09:07:32.393829 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 09:07:32.405746 Filename '/osstest/tmp//arndale-westfield--initrd.gz'. Oct 3 09:07:32.405788 Load address: 0x43300000 Oct 3 09:07:32.405832 Loading: *################################################################# Oct 3 09:07:32.693720 ################################################################# Oct 3 09:07:32.981690 ################################################################# Oct 3 09:07:33.257721 ################################################################# Oct 3 09:07:33.545684 ################################################################# Oct 3 09:07:33.845700 ################################################################# Oct 3 09:07:34.133724 ################################################################# Oct 3 09:07:34.421705 ################################################################# Oct 3 09:07:34.697730 ################################################################# Oct 3 09:07:34.997669 ################################################################# Oct 3 09:07:35.273689 ################################################################# Oct 3 09:07:35.549681 ################################################################# Oct 3 09:07:35.813724 ################################################################# Oct 3 09:07:36.089696 ################################################################# Oct 3 09:07:36.353645 ################################################################# Oct 3 09:07:36.629697 ################################################################# Oct 3 09:07:36.917688 ################################################################# Oct 3 09:07:37.217684 ################################################################# Oct 3 09:07:37.481674 ################################################################# Oct 3 09:07:37.769707 ################################################################# Oct 3 09:07:38.057682 ################################################################# Oct 3 09:07:38.345679 ################################################################# Oct 3 09:07:38.657701 ################################################################# Oct 3 09:07:38.969709 ################################################################# Oct 3 09:07:39.269684 ################################################################# Oct 3 09:07:39.585680 ################################################################# Oct 3 09:07:39.897614 ################################################################# Oct 3 09:07:40.185656 ######################################## Oct 3 09:07:40.377704 3 MiB/s Oct 3 09:07:40.377770 done Oct 3 09:07:40.377811 Bytes transferred = 26339181 (191e76d hex) Oct 3 09:07:40.377856 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/linux Oct 3 09:07:40.389777 Using asx0 device Oct 3 09:07:40.389831 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 09:07:40.401745 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/linux'. Oct 3 09:07:40.401846 Load address: 0x42000000 Oct 3 09:07:40.401892 Loading: *################################################################# Oct 3 09:07:40.713644 ################################################################# Oct 3 09:07:41.001690 ################################################################# Oct 3 09:07:41.313697 ################################################################# Oct 3 09:07:41.613775 ################################################################# Oct 3 09:07:41.913515 ############################################# Oct 3 09:07:42.129606 2.9 MiB/s Oct 3 09:07:42.141725 done Oct 3 09:07:42.141777 Bytes transferred = 5427712 (52d200 hex) Oct 3 09:07:42.141803 append: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=40014 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 09:07:42.177711 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb Oct 3 09:07:42.189687 Using asx0 device Oct 3 09:07:42.189714 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 09:07:42.201761 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb'. Oct 3 09:07:42.201812 Load address: 0x43000000 Oct 3 09:07:42.213593 Loading: *#### Oct 3 09:07:42.225647 2.5 MiB/s Oct 3 09:07:42.225686 done Oct 3 09:07:42.225724 Bytes transferred = 46686 (b65e hex) Oct 3 09:07:42.225765 Kernel image @ 0x42000000 [ 0x000000 - 0x52d200 ] Oct 3 09:07:42.237674 ## Flattened Device Tree blob at 43000000 Oct 3 09:07:42.237703 Booting using the fdt blob at 0x43000000 Oct 3 09:07:42.237728 Loading Ramdisk to 4e6e1000, end 4ffff76d ... OK Oct 3 09:07:42.669701 Loading Device Tree to 4e6d2000, end 4e6e065d ... OK Oct 3 09:07:42.669764 Oct 3 09:07:42.681708 Starting kernel ...(fake run for tracing) Oct 3 09:07:42.681777 Oct 3 09:07:42.681819 Oct 3 09:07:42.681879 Starting kernel ... Oct 3 09:07:42.693681 Oct 3 09:07:42.693735 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 09:07:48.736980 [ 0.000000] Linux version 6.1.0-25-armmp (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.106-3 (2024-08-26) Oct 3 09:07:48.748839 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 09:07:48.760810 [ 0.000000] CPU: div instructions available: patching division code Oct 3 09:07:48.760810 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 09:07:48.772890 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 09:07:48.772890 [ 0.000000] Memory policy: Data cache writealloc Oct 3 09:07:48.784883 [ 0.000000] efi: UEFI not found. Oct 3 09:07:48.784883 [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 Oct 3 09:07:48.784883 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 09:07:48.796889 [ 0.000000] Zone ranges: Oct 3 09:07:48.796889 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 09:07:48.796889 [ 0.000000] Normal empty Oct 3 09:07:48.808871 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 09:07:48.808871 [ 0.000000] Movable zone start for each node Oct 3 09:07:48.820873 [ 0.000000] Early memory node ranges Oct 3 09:07:48.820873 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 09:07:48.820873 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 09:07:48.832874 [ 0.000000] percpu: Embedded 18 pages/cpu s44692 r8192 d20844 u73728 Oct 3 09:07:48.844894 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 09:07:48.844894 [ 0.000000] Kernel command line: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=40014 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 09:07:48.892883 [ 0.000000] Unknown kernel command line parameters "preseed --- vga=normal auto=true hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=40014 domain=test-lab.xenproject.org", will be passed to user space. Oct 3 09:07:48.929063 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 09:07:48.940882 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 09:07:48.940882 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 09:07:48.952871 [ 0.000000] Memory: 2015968K/2097152K available (11264K kernel code, 1696K rwdata, 3724K rodata, 2048K init, 376K bss, 64800K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 09:07:48.963856 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 09:07:48.976884 [ 0.000000] ftrace: allocating 39612 entries in 117 pages Oct 3 09:07:48.976884 [ 0.000000] ftrace: allocated 117 pages with 5 groups Oct 3 09:07:48.976884 [ 0.000000] trace event string verifier disabled Oct 3 09:07:48.989832 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 09:07:48.989893 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 09:07:48.989945 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 09:07:49.001769 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 09:07:49.001830 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 09:07:49.013763 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 09:07:49.013827 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 09:07:49.025772 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 09:07:49.025833 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 09:07:49.037755 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 09:07:49.037818 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 09:07:49.049751 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 09:07:49.061752 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 09:07:49.061823 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 09:07:49.073773 [ 0.002609] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 09:07:49.073836 [ 0.002622] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 09:07:49.085786 [ 0.002636] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 09:07:49.097758 [ 0.002648] Ignoring duplicate/late registration of read_current_timer delay Oct 3 09:07:49.109719 [ 0.003009] Console: colour dummy device 80x30 Oct 3 09:07:49.109780 [ 0.003049] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 09:07:49.121813 [ 0.003062] CPU: Testing write buffer coherency: ok Oct 3 09:07:49.121894 [ 0.003105] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 09:07:49.133759 [ 0.003112] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 09:07:49.133823 [ 0.003119] pid_max: default: 32768 minimum: 301 Oct 3 09:07:49.145764 [ 0.003479] LSM: Security Framework initializing Oct 3 09:07:49.145824 [ 0.003550] landlock: Up and running. Oct 3 09:07:49.157755 [ 0.003555] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 09:07:49.157821 [ 0.003742] AppArmor: AppArmor initialized Oct 3 09:07:49.157867 [ 0.003754] TOMOYO Linux initialized Oct 3 09:07:49.169763 [ 0.003799] LSM support for eBPF active Oct 3 09:07:49.169822 [ 0.004045] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 09:07:49.181771 [ 0.004059] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 09:07:49.181839 [ 0.005484] /cpus/cpu@0 missing clock-frequency property Oct 3 09:07:49.193756 [ 0.005513] /cpus/cpu@1 missing clock-frequency property Oct 3 09:07:49.193817 [ 0.005526] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 09:07:49.205751 [ 0.006476] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 09:07:49.205820 [ 0.006482] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 09:07:49.217763 [ 0.006586] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 09:07:49.217831 [ 0.006592] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 09:07:49.229748 [ 0.006736] Setting up static identity map for 0x40300000 - 0x403000ac Oct 3 09:07:49.229823 [ 0.007891] rcu: Hierarchical SRCU implementation. Oct 3 09:07:49.241760 [ 0.007897] rcu: Max phase no-delay instances is 1000. Oct 3 09:07:49.241822 [ 0.010012] EFI services will not be available. Oct 3 09:07:49.253770 [ 0.010354] smp: Bringing up secondary CPUs ... Oct 3 09:07:49.253831 [ 0.011088] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 09:07:49.253881 [ 0.011100] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 09:07:49.265772 [ 0.011244] smp: Brought up 1 node, 2 CPUs Oct 3 09:07:49.277750 [ 0.011252] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 09:07:49.277814 [ 0.011260] CPU: All CPU(s) started in HYP mode. Oct 3 09:07:49.277863 [ 0.011264] CPU: Virtualization extensions available. Oct 3 09:07:49.289769 [ 0.011893] devtmpfs: initialized Oct 3 09:07:49.289827 [ 0.023305] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 09:07:49.301755 [ 0.023539] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 09:07:49.313759 [ 0.023564] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 09:07:49.313824 [ 0.024092] pinctrl core: initialized pinctrl subsystem Oct 3 09:07:49.325762 [ 0.024796] DMI not present or invalid. Oct 3 09:07:49.325822 [ 0.025471] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 09:07:49.325873 [ 0.030846] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 09:07:49.337760 [ 0.032395] audit: initializing netlink subsys (disabled) Oct 3 09:07:49.337822 [ 0.032601] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 Oct 3 09:07:49.349783 [ 0.033752] thermal_sys: Registered thermal governor 'fair_share' Oct 3 09:07:49.361744 [ 0.033759] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 09:07:49.361807 [ 0.033764] thermal_sys: Registered thermal governor 'step_wise' Oct 3 09:07:49.373776 [ 0.033768] thermal_sys: Registered thermal governor 'user_space' Oct 3 09:07:49.373840 [ 0.033773] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 09:07:49.385744 [ 0.034148] No ATAGs? Oct 3 09:07:49.385800 [ 0.034214] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 09:07:49.397775 [ 0.034223] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 09:07:49.397841 [ 0.035305] Serial: AMBA PL011 UART driver Oct 3 09:07:49.397888 [ 0.084757] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 09:07:49.409779 [ 0.091780] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 09:07:49.421764 [ 0.102636] iommu: Default domain type: Translated Oct 3 09:07:49.421825 [ 0.102645] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 09:07:49.433767 [ 0.103627] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 09:07:49.433830 [ 0.104163] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 09:07:49.445748 [ 0.104175] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 09:07:49.445811 [ 0.104710] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 09:07:49.457765 [ 0.104740] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 09:07:49.469755 [ 0.104924] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 09:07:49.469819 [ 0.105278] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 09:07:49.469868 [ 0.105288] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 09:07:49.481754 [ 0.105677] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 09:07:49.481816 [ 0.105968] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 09:07:49.493779 [ 0.105977] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 09:07:49.493842 [ 0.106254] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 09:07:49.505764 [ 0.106354] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 09:07:49.505826 [ 0.106363] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 09:07:49.505876 [ 0.106564] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 09:07:49.517775 [ 0.106759] pps_core: LinuxPPS API ver. 1 registered Oct 3 09:07:49.517837 [ 0.106764] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 09:07:49.529769 [ 0.106779] PTP clock support registered Oct 3 09:07:49.529827 [ 0.108423] NetLabel: Initializing Oct 3 09:07:49.541753 [ 0.108430] NetLabel: domain hash size = 128 Oct 3 09:07:49.541813 [ 0.108436] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 09:07:49.553750 [ 0.108491] NetLabel: unlabeled traffic allowed by default Oct 3 09:07:49.553813 [ 0.108677] vgaarb: loaded Oct 3 09:07:49.553858 [ 0.109309] clocksource: Switched to clocksource mct-frc Oct 3 09:07:49.565695 [ 0.109913] VFS: Disk quotas dquot_6.6.0 Oct 3 09:07:49.565728 [ 0.110002] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 09:07:49.577697 [ 0.110753] AppArmor: AppArmor Filesystem Enabled Oct 3 09:07:49.577730 [ 0.120749] NET: Registered PF_INET protocol family Oct 3 09:07:49.577757 [ 0.120979] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 09:07:49.589777 [ 0.122577] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 09:07:49.601768 [ 0.122678] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 09:07:49.601837 [ 0.122703] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 09:07:49.613755 [ 0.122803] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 09:07:49.625748 [ 0.123034] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 09:07:49.625811 [ 0.123272] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 09:07:49.637793 [ 0.123363] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 09:07:49.637856 [ 0.123405] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 09:07:49.649767 [ 0.123609] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 09:07:49.649849 [ 0.123645] NET: Registered PF_XDP protocol family Oct 3 09:07:49.661759 [ 0.123656] PCI: CLS 0 bytes, default 64 Oct 3 09:07:49.661819 [ 0.124777] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 09:07:49.673786 [ 0.125034] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 09:07:49.673855 [ 0.129674] Trying to unpack rootfs image as initramfs... Oct 3 09:07:49.685764 [ 0.183634] Initialise system trusted keyrings Oct 3 09:07:49.685825 [ 0.183728] Key type blacklist registered Oct 3 09:07:49.697705 [ 0.184165] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 09:07:49.697741 [ 0.191301] zbud: loaded Oct 3 09:07:49.697765 [ 0.194289] integrity: Platform Keyring initialized Oct 3 09:07:49.709722 [ 0.194319] integrity: Machine keyring initialized Oct 3 09:07:49.709755 [ 0.194327] Key type asymmetric registered Oct 3 09:07:49.709780 [ 0.194334] Asymmetric key parser 'x509' registered Oct 3 09:07:49.721768 [ 1.504330] Freeing initrd memory: 25724K Oct 3 09:07:49.721828 [ 1.515737] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 09:07:49.733819 [ 1.516046] bounce: pool size: 64 pages Oct 3 09:07:49.733878 [ 1.516217] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 09:07:49.745828 [ 1.516389] io scheduler mq-deadline registered Oct 3 09:07:49.745878 [ 1.521551] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 09:07:49.757839 [ 1.542102] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 09:07:49.757907 [ 1.542114] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 09:07:49.769789 [ 1.544348] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 09:07:49.781795 [ 1.544359] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 09:07:49.781835 [ 1.545218] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 09:07:49.793741 [ 1.545227] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 09:07:49.805773 [ 1.546082] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 09:07:49.805813 [ 1.546092] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 09:07:49.817783 [ 1.548382] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 09:07:49.829737 [ 1.551275] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 09:07:49.841788 [ 1.554060] Serial: AMBA driver Oct 3 09:07:49.841820 [ 1.554281] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 09:07:49.841852 [ 1.554772] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 09:07:49.853802 [ 1.555262] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 09:07:49.865763 [ 2.693366] printk: console [ttySAC2] enabled Oct 3 09:07:49.865796 [ 2.698243] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 09:07:49.877791 [ 2.708804] STM32 USART driver initialized Oct 3 09:07:49.877823 [ 2.722985] mousedev: PS/2 mouse device common for all mice Oct 3 09:07:49.901697 [ 2.754281] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 09:07:49.925723 [ 2.762907] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T09:01:52 UTC (1727946112) Oct 3 09:07:49.937659 [ 2.772700] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 09:07:49.949658 [ 2.780114] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 09:07:49.961607 [ 2.788140] NET: Registered PF_INET6 protocol family Oct 3 09:07:49.961637 [ 2.801838] Segment Routing with IPv6 Oct 3 09:07:49.973690 [ 2.804076] In-situ OAM (IOAM) with IPv6 Oct 3 09:07:49.985659 [ 2.808028] mip6: Mobile IPv6 Oct 3 09:07:49.985687 [ 2.810910] NET: Registered PF_PACKET protocol family Oct 3 09:07:49.985714 [ 2.816045] mpls_gso: MPLS GSO support Oct 3 09:07:49.997647 [ 2.820279] ThumbEE CPU extension supported. Oct 3 09:07:49.997676 [ 2.823930] Registering SWP/SWPB emulation handler Oct 3 09:07:49.997702 [ 2.829191] registered taskstats version 1 Oct 3 09:07:50.009620 [ 2.832801] Loading compiled-in X.509 certificates Oct 3 09:07:50.009649 [ 3.293354] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 09:07:50.477720 [ 3.300683] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 09:07:50.477767 [ 3.311643] zswap: loaded using pool lzo/zbud Oct 3 09:07:50.489709 [ 3.315683] Key type .fscrypt registered Oct 3 09:07:50.489742 [ 3.319046] Key type fscrypt-provisioning registered Oct 3 09:07:50.501659 [ 3.332690] Key type encrypted registered Oct 3 09:07:50.501692 [ 3.335266] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 09:07:50.513713 [ 3.340763] ima: No TPM chip found, activating TPM-bypass! Oct 3 09:07:50.513748 [ 3.346183] ima: Allocated hash algorithm: sha256 Oct 3 09:07:50.525714 [ 3.350893] ima: No architecture policies found Oct 3 09:07:50.525748 [ 3.355430] evm: Initialising EVM extended attributes: Oct 3 09:07:50.537710 [ 3.360500] evm: security.selinux Oct 3 09:07:50.537743 [ 3.363796] evm: security.SMACK64 (disabled) Oct 3 09:07:50.537769 [ 3.368049] evm: security.SMACK64EXEC (disabled) Oct 3 09:07:50.549709 [ 3.372649] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 09:07:50.549744 [ 3.377684] evm: security.SMACK64MMAP (disabled) Oct 3 09:07:50.549770 [ 3.382284] evm: security.apparmor Oct 3 09:07:50.561726 [ 3.385669] evm: security.ima Oct 3 09:07:50.561758 [ 3.388605] evm: security.capability Oct 3 09:07:50.561783 [ 3.392185] evm: HMAC attrs: 0x1 Oct 3 09:07:50.561808 [ 3.979694] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 09:07:51.161680 [ 3.985760] clk: Disabling unused clocks Oct 3 09:07:51.161714 [ 3.999413] Freeing unused kernel image (initmem) memory: 2048K Oct 3 09:07:51.173689 [ 4.004296] Checked W+X mappings: passed, no W+X pages found Oct 3 09:07:51.185674 [ 4.009550] Run /init as init process Oct 3 09:07:51.185728 [ 4.564714] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 09:07:51.737694 [ 4.614955] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 09:07:51.797660 [ 4.629099] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 09:07:51.809684 [ 4.642967] usbcore: registered new interface driver usbfs Oct 3 09:07:51.821640 [ 4.647106] usbcore: registered new interface driver hub Oct 3 09:07:51.821674 [ 4.658663] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 09:07:51.833694 [ 4.687500] usbcore: registered new device driver usb Oct 3 09:07:51.857656 [ 4.707432] phy phy-12130000.phy.3: phy_power_on was called before phy_init Oct 3 09:07:51.887334 [ 4.730811] exynos-ohci 12120000.usb: USB Host Controller Oct 3 09:07:51.905673 [ 4.730822] phy phy-12130000.phy.3: phy_power_on was called before phy_init Oct 3 09:07:51.917666 [ 4.734810] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Oct 3 09:07:51.917705 [ 4.764510] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 09:07:51.941679 [ 4.774640] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Oct 3 09:07:51.953665 [ 4.790790] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 09:07:51.965708 [ 4.809697] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Oct 3 09:07:51.989661 [ 4.835545] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Oct 3 09:07:52.013699 [ 4.848505] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 09:07:52.025744 [ 4.849433] usb3503 usb-hub: switched to HUB mode Oct 3 09:07:52.037714 [ 4.855384] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 09:07:52.037780 [ 4.860022] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 09:07:52.049706 [ 4.867220] usb usb1: Product: USB Host Controller Oct 3 09:07:52.049754 [ 4.877817] usb usb1: Manufacturer: Linux 6.1.0-25-armmp ohci_hcd Oct 3 09:07:52.061677 [ 4.883887] usb usb1: SerialNumber: 12120000.usb Oct 3 09:07:52.061747 [ 4.895806] hub 1-0:1.0: USB hub found Oct 3 09:07:52.073679 [ 4.899307] hub 1-0:1.0: 3 ports detected Oct 3 09:07:52.073736 [ 4.909528] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 09:07:52.085729 [ 4.923045] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 09:07:52.097708 [ 4.929902] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 09:07:52.109721 [ 4.937116] usb usb2: Product: EHCI Host Controller Oct 3 09:07:52.109782 [ 4.941946] usb usb2: Manufacturer: Linux 6.1.0-25-armmp ehci_hcd Oct 3 09:07:52.121700 [ 4.948009] usb usb2: SerialNumber: 12110000.usb Oct 3 09:07:52.121733 [ 4.975132] hub 2-0:1.0: USB hub found Oct 3 09:07:52.145674 [ 4.980083] hub 2-0:1.0: 3 ports detected Oct 3 09:07:52.157654 [ 5.225547] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 09:07:52.397687 [ 5.229609] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 09:07:52.409714 [ 5.237747] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 09:07:52.421713 [ 5.241357] usb 2-3: new high-speed USB device number 2 using exynos-ehci Oct 3 09:07:52.421749 [ 5.246650] xhci-hcd xhci-hcd.2.auto: irq 108, io mem 0x12000000 Oct 3 09:07:52.433718 [ 5.259618] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 09:07:52.433783 [ 5.264851] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 09:07:52.445715 [ 5.272467] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 09:07:52.445776 [ 5.279131] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 09:07:52.457712 [ 5.287244] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 09:07:52.469710 [ 5.294437] usb usb3: Product: xHCI Host Controller Oct 3 09:07:52.469771 [ 5.299282] usb usb3: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 09:07:52.481710 [ 5.305355] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 09:07:52.481743 [ 5.310824] hub 3-0:1.0: USB hub found Oct 3 09:07:52.481768 [ 5.313986] hub 3-0:1.0: 1 port detected Oct 3 09:07:52.493709 [ 5.318345] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 09:07:52.493772 [ 5.326069] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 09:07:52.505722 [ 5.334180] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 09:07:52.517709 [ 5.341395] usb usb4: Product: xHCI Host Controller Oct 3 09:07:52.517764 [ 5.346244] usb usb4: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 09:07:52.529710 [ 5.352319] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 09:07:52.529744 [ 5.357893] hub 4-0:1.0: USB hub found Oct 3 09:07:52.529769 [ 5.360922] hub 4-0:1.0: 1 port detected Oct 3 09:07:52.541638 [ 5.413828] usb 2-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Oct 3 09:07:52.589711 [ 5.420649] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 3 09:07:52.601710 [ 5.429554] hub 2-3:1.0: USB hub found Oct 3 09:07:52.601742 [ 5.432580] hub 2-3:1.0: 3 ports detected Oct 3 09:07:52.613627 Starting system log daemon: syslogd, klogd. Oct 3 09:07:52.685644 /var/run/utmp: No such file or directory Oct 3 09:07:54.548853 [?1h=(B   Oct 3 09:07:54.584918  Oct 3 09:07:54.596908 [  (-*) ][ Oct 03  9:01 ] Oct 3 09:07:54.608912 [  (0*start) ][ Oct 03  9:01 ] Oct 3 09:07:54.621096 [  (0*start) ][ Oct 03  9:01 ] Oct 3 09:07:54.632914 [  (0*start) ][ Oct 03  9:01 ] Oct 3 09:07:54.644900 [  (0*start) ][ Oct 03  9:01 ]                        [  (0*start) ][ Oct 03  9:01 ][  (0*start) ][ Oct 03  9:01 ] Oct 3 09:07:54.704922 [ 0- start  (2*shell) ][ Oct 03  9:01 ] Oct 3 09:07:54.717053 [ 0- start  (2*shell) ][ Oct 03  9:01 ] Oct 3 09:07:54.728898 [ 0- start  (2*shell) ][ Oct 03  9:01 ] Oct 3 09:07:54.752919 [ 0- start  (2*shell) ][ Oct 03  9:01 ]                        [ 0- start  (2*shell) ][ Oct 03  9:01 ][ 0- start  (2*shell) ][ Oct 03  9:01 ] Oct 3 09:07:54.800889 [ 0 start 2- shell  (3*shell) ][ Oct 03  9:01 ] Oct 3 09:07:54.812878 [ 0 start 2- shell  (3*shell) ][ Oct 03  9:01 ] Oct 3 09:07:54.837081 [ 0 start 2- shell  (3*shell) ][ Oct 03  9:01 ] Oct 3 09:07:54.849076 [ 0 start 2- shell  (3*shell) ][ Oct 03  9:01 ]                        [ 0 start 2- shell  (3*shell) ][ Oct 03  9:01 ][ 0 start 2- shell  (3*shell) ][ Oct 03  9:01 ] Oct 3 09:07:54.897092 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  9:01 ] Oct 3 09:07:54.920922 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  9:01 ] Oct 3 09:07:54.933037 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  9:01 ] Oct 3 09:07:54.944921 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  9:01 ]                        [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  9:01 ][ 0 start 2 shell 3- shell  (4*log) ][ Oct 03  9:01 ] Oct 3 09:07:55.004875 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  9:01 ] Oct 3 09:07:55.016868 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  9:01 ] Oct 3 09:07:55.028880 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  9:01 ] Oct 3 09:07:55.040891 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  9:01 ]                        [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  9:01 ][ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03  9:01 ] Oct 3 09:07:55.100908 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  9:01 ] Oct 3 09:07:55.112860 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  9:01 ] Oct 3 09:07:55.124800 [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  9:01 ] Oct 3 09:07:55.580870 Detecting network hardware ... 2%... 95%... 100% Oct 3 09:07:57.305705 [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  9:02 ] Oct 3 09:07:57.545851 Oct 3 09:07:57.545885 Detecting link on eth0; please wait... ... 0%... 10%... 20% Oct 3 09:08:02.213797 Waiting for link-local address... ... 8%... 16%... 25%... 33%... 41%... 100% Oct 3 09:08:03.500825 Attempting IPv6 autoconfiguration... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 75%... 83%... 91%... 100% Oct 3 09:08:09.569671 Configuring the network with DHCP ... 0%... 100% Oct 3 09:08:12.724781 Checking the Debian archive mirror ... 25%... 50%... 75%... 100% Oct 3 09:08:20.789540 Loading additional components ... 0%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Oct 3 09:08:53.877706 Setting up the clock ... 0%... 3%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  9:08 ]... 100% Oct 3 09:08:56.629640 Loading additional components ... 50%... 100% Oct 3 09:08:58.345652 Detecting disks and all other hardware [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  9:09 ]... 2%... 95%... 100% Oct 3 09:09:02.957700 Loading additional components ... 12%... 25%... 37%... 50%... 62%... 75%... 87%... 100% Oct 3 09:09:09.836816 Loading additional components ... 25%... 50%... 75%... 100% Oct 3 09:09:12.221721 Starting up the partitioner ... 4%... 13%... 21%... 30%... 43%... 52%... 60%... 73%... 82%... 91%... 100% Oct 3 09:09:24.101777 Guided partitioning ... 16%... 33%... 50%... 66%... 83%... 100% Oct 3 09:09:32.637599 Starting up the partitioner ... 4%... 12%... 20%... 32%... 40%... 52%... 60%... 72%... 80%... 92%... 100% Oct 3 09:09:43.693720 Partitions formatting ... 33% Oct 3 09:09:52.485719 Partitions formatting [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  9:10 ] Oct 3 09:10:01.804667 Partitions formatting Installing the base system ... 0%... 17%... 20%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  9:11 ]... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  9:12 ]... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  9:13 ]... 48%... 50%...  Oct 3 09:13:52.469614  60%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  9:14 ]... 70%... 79%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  9:15 ]... 83%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  9:16 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  9:17 ]... 91%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  9:18 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  9:19 ]... 100% Oct 3 09:19:34.245722 Configuring apt ... 7%... 14%... 14%... 21%... 35%... 42%... 50%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  9:20 ]... 61%... 70%. Oct 3 09:20:11.409640 ... 82%... 92%... 100% Oct 3 09:20:13.953510 Select and install software ... 1%... 10%... 13%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  9:21 ]... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  9:22 ]... 40%... 50%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  9:23 ]... Oct 3 09:23:02.529748 . 60%... 70%... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  9:24 ]... 88%... 90%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  9:25 ]... 94%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  9:26 ]... 100% Oct 3 09:26:06.737774 Finishing the installation ... 4%... 12%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  9:27 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03  9:28 ]... 16%... 20%... 32%... 40%... 44%... Oct 3 09:28:16.529616  52%... 60%... 72%... 80%... 92% The system is going down NOW! Oct 3 09:28:26.385677 Sent SIGTERM Sent SIGKILL to all processes Oct 3 09:28:27.385808 Requesting system reboot Oct 3 09:28:27.385886 [ 1241.245232] reboot: Reű Oct 3 09:28:28.741730 Oct 3 09:28:28.741792 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 09:28:28.741845 Oct 3 09:28:28.741884 CPU: Exynos5250@1000MHz Oct 3 09:28:28.753751 Oct 3 09:28:28.753803 Board: Arndale Oct 3 09:28:28.753846 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 09:28:28.753895 ready Oct 3 09:28:28.753935 DRAM: 2 GiB Oct 3 09:28:28.753975 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 09:28:28.777676 trace: enabled Oct 3 09:28:28.813769 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 09:28:29.173770 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 09:28:29.233796 In: serial Oct 3 09:28:29.233852 Out: serial Oct 3 09:28:29.233894 Err: serial Oct 3 09:28:29.233934 SCSI: ARNDALE SCSI INIT Oct 3 09:28:29.233976 Target spinup took 0 ms. Oct 3 09:28:29.245811 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 09:28:29.245875 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 09:28:29.245925 Net: Net Initialization Skipped Oct 3 09:28:29.257804 No ethernet found. Oct 3 09:28:29.257861 Hostname: arndale-westfield Oct 3 09:28:29.257906 Hit any key to stop autoboot: 2  1  0 Oct 3 09:28:31.181738 (Re)start USB... Oct 3 09:28:31.181789 USB0: USB EHCI 1.00 Oct 3 09:28:31.193606 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 09:28:36.781786 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 09:28:36.793769 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 09:28:37.237793 Waiting for Ethernet connection... done. Oct 3 09:28:38.889598 BOOTP broadcast 1 Oct 3 09:28:38.889598 BOOTP broadcast 2 Oct 3 09:28:40.061870 DHCP client bound to address 10.149.64.45 (1227 ms) Oct 3 09:28:40.061943 Using asx0 device Oct 3 09:28:40.073758 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 09:28:40.073819 Filename 'pxelinux.0'. Oct 3 09:28:40.073863 Load address: 0x43e00000 Oct 3 09:28:40.073906 Loading: *### Oct 3 09:28:40.097650 2.7 MiB/s Oct 3 09:28:40.097650 done Oct 3 09:28:40.097650 Bytes transferred = 42430 (a5be hex) Oct 3 09:28:40.097650 missing environment variable: pxeuuid Oct 3 09:28:40.097650 Retrieving file: pxelinux.cfg/0A95402D Oct 3 09:28:40.105651 Using asx0 device Oct 3 09:28:40.105651 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 09:28:40.117769 Filename 'pxelinux.cfg/0A95402D'. Oct 3 09:28:40.117834 Load address: 0x51000000 Oct 3 09:28:40.117879 Loading: *# Oct 3 09:28:40.117920 31.3 KiB/s Oct 3 09:28:40.117961 done Oct 3 09:28:40.118000 Bytes transferred = 65 (41 hex) Oct 3 09:28:40.118043 Config file found Oct 3 09:28:40.129646 Ignoring unknown command: serial Oct 3 09:28:40.129773 1: local Oct 3 09:28:40.129773 scanning bus for devices... Oct 3 09:28:40.129773 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 09:28:40.165849 Type: Hard Disk Oct 3 09:28:40.165913 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 09:28:40.165964 Found 1 device(s). Oct 3 09:28:40.177772 Oct 3 09:28:40.177824 SCSI device 0: Oct 3 09:28:40.177894 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 09:28:40.177947 Type: Hard Disk Oct 3 09:28:40.177991 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 09:28:40.189739 ... is now current device Oct 3 09:28:40.189796 Scanning scsi 0... Oct 3 09:28:40.189839 Found U-Boot script /boot.scr Oct 3 09:28:40.309690 639 bytes read in 37 ms (16.6 KiB/s) Oct 3 09:28:40.345753 ## Executing script at 50000000 Oct 3 09:28:40.345811 Loading dtbs/exynos5250-arndale.dtb Oct 3 09:28:40.357695 46686 bytes read in 1213 ms (37.1 KiB/s) Oct 3 09:28:41.545749 Loading vmlinuz-6.1.0-25-armmp-lpae Oct 3 09:28:41.545818 5509632 bytes read in 185 ms (28.4 MiB/s) Oct 3 09:28:41.749627 Loading initrd.img-6.1.0-25-armmp-lpae Oct 3 09:28:41.749667 25732364 bytes read in 1886 ms (13 MiB/s) Oct 3 09:28:43.581887 Booting Oct 3 09:28:43.581950 Kernel image @ 0x42000000 [ 0x000000 - 0x541200 ] Oct 3 09:28:43.581999 ## Flattened Device Tree blob at 43000000 Oct 3 09:28:43.593842 Booting using the fdt blob at 0x43000000 Oct 3 09:28:43.593902 Loading Ramdisk to 4e775000, end 4ffff50c ... OK Oct 3 09:28:44.009692 Loading Device Tree to 4e766000, end 4e77465d ... OK Oct 3 09:28:44.009776 Oct 3 09:28:44.021678 Starting kernel ...(fake run for tracing) Oct 3 09:28:44.021763 Oct 3 09:28:44.021793 Oct 3 09:28:44.021822 Starting kernel ... Oct 3 09:28:44.037659 Oct 3 09:28:44.037703 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 09:28:50.165709 [ 0.000000] Linux version 6.1.0-25-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.106-3 (2024-08-26) Oct 3 09:28:50.189809 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=30c5387d Oct 3 09:28:50.189875 [ 0.000000] CPU: div instructions available: patching division code Oct 3 09:28:50.201806 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 09:28:50.213807 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 09:28:50.213879 [ 0.000000] Memory policy: Data cache writealloc Oct 3 09:28:50.225761 [ 0.000000] efi: UEFI not found. Oct 3 09:28:50.225822 [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000 Oct 3 09:28:50.225872 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 09:28:50.237663 [ 0.000000] Zone ranges: Oct 3 09:28:50.237663 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 09:28:50.237663 [ 0.000000] Normal empty Oct 3 09:28:50.249902 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 09:28:50.249971 [ 0.000000] Movable zone start for each node Oct 3 09:28:50.250019 [ 0.000000] Early memory node ranges Oct 3 09:28:50.265775 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 09:28:50.265865 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 09:28:50.277725 [ 0.000000] percpu: Embedded 18 pages/cpu s44820 r8192 d20716 u73728 Oct 3 09:28:50.277792 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 09:28:50.289518 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=ttySAC2,115200n8 Oct 3 09:28:50.289518 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 09:28:50.297489 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 09:28:50.309643 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 09:28:50.321808 [ 0.000000] Memory: 2015504K/2097152K available (12288K kernel code, 1717K rwdata, 3748K rodata, 2048K init, 383K bss, 65264K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 09:28:50.333721 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 09:28:50.333833 [ 0.000000] ftrace: allocating 39996 entries in 118 pages Oct 3 09:28:50.345820 [ 0.000000] ftrace: allocated 118 pages with 5 groups Oct 3 09:28:50.345881 [ 0.000000] trace event string verifier disabled Oct 3 09:28:50.361825 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 09:28:50.361889 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 09:28:50.361938 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 09:28:50.373757 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 09:28:50.373822 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 09:28:50.381761 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 09:28:50.397781 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 09:28:50.397843 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 09:28:50.397891 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 09:28:50.409606 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 09:28:50.409606 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 09:28:50.421681 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 09:28:50.421681 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 09:28:50.433795 [ 0.000019] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 09:28:50.441636 [ 0.002620] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 09:28:50.453757 [ 0.002635] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 09:28:50.453837 [ 0.002649] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 09:28:50.469760 [ 0.002660] Ignoring duplicate/late registration of read_current_timer delay Oct 3 09:28:50.469823 [ 0.003029] Console: colour dummy device 80x30 Oct 3 09:28:50.481516 [ 0.003071] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 09:28:50.493779 [ 0.003084] CPU: Testing write buffer coherency: ok Oct 3 09:28:50.493846 [ 0.003125] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 09:28:50.501741 [ 0.003133] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 09:28:50.517808 [ 0.003139] pid_max: default: 32768 minimum: 301 Oct 3 09:28:50.517903 [ 0.003507] LSM: Security Framework initializing Oct 3 09:28:50.517960 [ 0.003579] landlock: Up and running. Oct 3 09:28:50.517992 [ 0.003584] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 09:28:50.529816 [ 0.003774] AppArmor: AppArmor initialized Oct 3 09:28:50.529816 [ 0.003786] TOMOYO Linux initialized Oct 3 09:28:50.541734 [ 0.003831] LSM support for eBPF active Oct 3 09:28:50.541830 [ 0.004078] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 09:28:50.553817 [ 0.004091] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 09:28:50.553886 [ 0.005506] /cpus/cpu@0 missing clock-frequency property Oct 3 09:28:50.561719 [ 0.005534] /cpus/cpu@1 missing clock-frequency property Oct 3 09:28:50.561719 [ 0.005548] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 09:28:50.573737 [ 0.006497] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 09:28:50.573818 [ 0.006504] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 09:28:50.585730 [ 0.006608] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 09:28:50.597743 [ 0.006614] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 09:28:50.597837 [ 0.006754] Setting up static identity map for 0x40400000 - 0x404000ac Oct 3 09:28:50.609736 [ 0.007915] rcu: Hierarchical SRCU implementation. Oct 3 09:28:50.609885 [ 0.007921] rcu: Max phase no-delay instances is 1000. Oct 3 09:28:50.609946 [ 0.010046] EFI services will not be available. Oct 3 09:28:50.621743 [ 0.010393] smp: Bringing up secondary CPUs ... Oct 3 09:28:50.621743 [ 0.011133] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 09:28:50.633735 [ 0.011146] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 09:28:50.633879 [ 0.011277] smp: Brought up 1 node, 2 CPUs Oct 3 09:28:50.645822 [ 0.011286] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 09:28:50.645878 [ 0.011293] CPU: All CPU(s) started in HYP mode. Oct 3 09:28:50.657836 [ 0.011297] CPU: Virtualization extensions available. Oct 3 09:28:50.657899 [ 0.012170] devtmpfs: initialized Oct 3 09:28:50.657928 [ 0.023155] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 09:28:50.669821 [ 0.023383] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 09:28:50.681832 [ 0.023408] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 09:28:50.681905 [ 0.023942] pinctrl core: initialized pinctrl subsystem Oct 3 09:28:50.693789 [ 0.024694] DMI not present or invalid. Oct 3 09:28:50.693844 [ 0.025372] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 09:28:50.705819 [ 0.026927] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 09:28:50.705875 [ 0.028445] audit: initializing netlink subsys (disabled) Oct 3 09:28:50.717744 [ 0.028647] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 Oct 3 09:28:50.717825 [ 0.029833] thermal_sys: Registered thermal governor 'fair_share' Oct 3 09:28:50.729821 [ 0.029840] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 09:28:50.729821 [ 0.029845] thermal_sys: Registered thermal governor 'step_wise' Oct 3 09:28:50.741741 [ 0.029849] thermal_sys: Registered thermal governor 'user_space' Oct 3 09:28:50.741836 [ 0.029854] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 09:28:50.753858 [ 0.030055] No ATAGs? Oct 3 09:28:50.753912 [ 0.030121] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 09:28:50.765828 [ 0.030129] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 09:28:50.765893 [ 0.031217] Serial: AMBA PL011 UART driver Oct 3 09:28:50.777795 [ 0.080579] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 09:28:50.777938 [ 0.087513] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 09:28:50.789786 [ 0.091848] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages Oct 3 09:28:50.789867 [ 0.091855] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page Oct 3 09:28:50.801816 [ 0.099712] iommu: Default domain type: Translated Oct 3 09:28:50.801888 [ 0.099720] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 09:28:50.813744 [ 0.100668] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 09:28:50.813888 [ 0.101185] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 09:28:50.825828 [ 0.101196] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 09:28:50.825882 [ 0.101731] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 09:28:50.837818 [ 0.101761] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 09:28:50.849817 [ 0.101989] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 09:28:50.849872 [ 0.102482] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 09:28:50.861737 [ 0.102493] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 09:28:50.861817 [ 0.102872] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 09:28:50.873733 [ 0.103191] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 09:28:50.873733 [ 0.103201] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 09:28:50.873885 [ 0.103516] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 09:28:50.885703 [ 0.103616] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 09:28:50.885772 [ 0.103624] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 09:28:50.897721 [ 0.103805] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 09:28:50.897793 [ 0.104024] pps_core: LinuxPPS API ver. 1 registered Oct 3 09:28:50.909711 [ 0.104030] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 09:28:50.909777 [ 0.104047] PTP clock support registered Oct 3 09:28:50.921743 [ 0.105568] NetLabel: Initializing Oct 3 09:28:50.921801 [ 0.105574] NetLabel: domain hash size = 128 Oct 3 09:28:50.921848 [ 0.105579] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 09:28:50.933725 [ 0.105633] NetLabel: unlabeled traffic allowed by default Oct 3 09:28:50.933785 [ 0.105805] vgaarb: loaded Oct 3 09:28:50.945744 [ 0.106739] clocksource: Switched to clocksource mct-frc Oct 3 09:28:50.945806 [ 0.107356] VFS: Disk quotas dquot_6.6.0 Oct 3 09:28:50.945853 [ 0.107443] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 09:28:50.957761 [ 0.108236] AppArmor: AppArmor Filesystem Enabled Oct 3 09:28:50.957822 [ 0.118175] NET: Registered PF_INET protocol family Oct 3 09:28:50.969750 [ 0.118378] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 09:28:50.969819 [ 0.120031] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 09:28:50.981766 [ 0.120131] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 09:28:50.993714 [ 0.120156] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 09:28:50.993776 [ 0.120257] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 09:28:51.005747 [ 0.120488] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 09:28:51.005866 [ 0.120729] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 09:28:51.017768 [ 0.120824] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 09:28:51.029729 [ 0.120864] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 09:28:51.029795 [ 0.121100] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 09:28:51.041742 [ 0.121136] NET: Registered PF_XDP protocol family Oct 3 09:28:51.041804 [ 0.121147] PCI: CLS 0 bytes, default 64 Oct 3 09:28:51.041851 [ 0.121664] Trying to unpack rootfs image as initramfs... Oct 3 09:28:51.053743 [ 0.121994] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 09:28:51.053812 [ 0.127388] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 09:28:51.065765 [ 0.193477] Initialise system trusted keyrings Oct 3 09:28:51.065824 [ 0.193544] Key type blacklist registered Oct 3 09:28:51.077748 [ 0.194831] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 09:28:51.077812 [ 0.202709] zbud: loaded Oct 3 09:28:51.089739 [ 0.205349] integrity: Platform Keyring initialized Oct 3 09:28:51.089800 [ 0.205412] integrity: Machine keyring initialized Oct 3 09:28:51.089848 [ 0.205422] Key type asymmetric registered Oct 3 09:28:51.101744 [ 0.205430] Asymmetric key parser 'x509' registered Oct 3 09:28:51.101805 [ 1.422402] Freeing initrd memory: 25132K Oct 3 09:28:51.101852 [ 1.444577] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 09:28:51.113716 [ 1.444844] bounce: pool size: 64 pages Oct 3 09:28:51.113774 [ 1.445041] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 09:28:51.125752 [ 1.445208] io scheduler mq-deadline registered Oct 3 09:28:51.125810 [ 1.450316] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 09:28:51.137819 [ 1.471299] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 09:28:51.149740 [ 1.471312] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 09:28:51.149817 [ 1.473610] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 09:28:51.161753 [ 1.473620] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 09:28:51.173741 [ 1.474405] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 09:28:51.173811 [ 1.474414] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 09:28:51.185768 [ 1.475267] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 09:28:51.197757 [ 1.475276] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 09:28:51.197830 [ 1.477615] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 09:28:51.209770 [ 1.480468] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 09:28:51.221744 [ 1.483231] Serial: AMBA driver Oct 3 09:28:51.221802 [ 1.483459] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 09:28:51.233762 [ 1.483952] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 09:28:51.245751 [ 1.484421] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 09:28:51.245824 [ 2.565154] printk: console [ttySAC2] enabled Oct 3 09:28:51.257736 [ 2.569968] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 09:28:51.257815 [ 2.580658] STM32 USART driver initialized Oct 3 09:28:51.269680 [ 2.595098] mousedev: PS/2 mouse device common for all mice Oct 3 09:28:51.281715 [ 2.626365] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 09:28:51.317726 [ 2.634998] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T09:28:51 UTC (1727947731) Oct 3 09:28:51.329737 [ 2.644853] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 09:28:51.329800 [ 2.652331] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 09:28:51.341739 [ 2.660353] NET: Registered PF_INET6 protocol family Oct 3 09:28:51.353669 [ 2.684445] Segment Routing with IPv6 Oct 3 09:28:51.365709 [ 2.686688] In-situ OAM (IOAM) with IPv6 Oct 3 09:28:51.377744 [ 2.690682] mip6: Mobile IPv6 Oct 3 09:28:51.377808 [ 2.693529] NET: Registered PF_PACKET protocol family Oct 3 09:28:51.377858 [ 2.698694] mpls_gso: MPLS GSO support Oct 3 09:28:51.389764 [ 2.702764] ThumbEE CPU extension supported. Oct 3 09:28:51.389839 [ 2.706522] Registering SWP/SWPB emulation handler Oct 3 09:28:51.389891 [ 2.711799] registered taskstats version 1 Oct 3 09:28:51.401730 [ 2.715417] Loading compiled-in X.509 certificates Oct 3 09:28:51.401790 [ 3.176042] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 09:28:51.865779 [ 3.183393] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 09:28:51.877785 [ 3.194459] zswap: loaded using pool lzo/zbud Oct 3 09:28:51.877851 [ 3.198386] Key type .fscrypt registered Oct 3 09:28:51.889732 [ 3.201714] Key type fscrypt-provisioning registered Oct 3 09:28:51.889793 [ 3.225843] Key type encrypted registered Oct 3 09:28:51.913758 [ 3.228442] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 09:28:51.913820 [ 3.233928] ima: No TPM chip found, activating TPM-bypass! Oct 3 09:28:51.925715 [ 3.239374] ima: Allocated hash algorithm: sha256 Oct 3 09:28:51.925775 [ 3.244057] ima: No architecture policies found Oct 3 09:28:51.937748 [ 3.248615] evm: Initialising EVM extended attributes: Oct 3 09:28:51.937817 [ 3.253662] evm: security.selinux Oct 3 09:28:51.937864 [ 3.256963] evm: security.SMACK64 (disabled) Oct 3 09:28:51.949768 [ 3.261208] evm: security.SMACK64EXEC (disabled) Oct 3 09:28:51.949831 [ 3.265810] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 09:28:51.949880 [ 3.270845] evm: security.SMACK64MMAP (disabled) Oct 3 09:28:51.961745 [ 3.275443] evm: security.apparmor Oct 3 09:28:51.961804 [ 3.278827] evm: security.ima Oct 3 09:28:51.961848 [ 3.281762] evm: security.capability Oct 3 09:28:51.973709 [ 3.285344] evm: HMAC attrs: 0x1 Oct 3 09:28:51.973768 [ 3.871936] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 09:28:52.561838 [ 3.877884] clk: Disabling unused clocks Oct 3 09:28:52.561908 [ 3.890806] Freeing unused kernel image (initmem) memory: 2048K Oct 3 09:28:52.573812 [ 3.895681] Checked W+X mappings: passed, no W+X pages found Oct 3 09:28:52.585828 [ 3.900920] Run /init as init process Oct 3 09:28:52.585888 Loading, please wait... Oct 3 09:28:52.613747 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 09:28:52.697570 [ 4.837274] usbcore: registered new interface driver usbfs Oct 3 09:28:53.521666 [ 4.837673] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 09:28:53.533651 [ 4.841465] usbcore: registered new interface driver hub Oct 3 09:28:53.533686 [ 4.860819] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 09:28:53.545648 [ 4.877522] usbcore: registered new device driver usb Oct 3 09:28:53.569717 [ 4.883753] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 09:28:53.569789 [ 4.895219] phy phy-12130000.phy.2: phy_power_on was called before phy_init Oct 3 09:28:53.581700 [ 4.914288] Synopsys Designware Multimedia Card Interface Driver Oct 3 09:28:53.605638 [ 4.921541] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 09:28:53.605676 [ 4.927392] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 09:28:53.617675 [ 4.934130] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 09:28:53.617735 [ 4.939380] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Oct 3 09:28:53.629651 [ 4.950667] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 09:28:53.641678 [ 4.955681] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 09:28:53.641711 [ 4.961370] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 09:28:53.653660 [ 4.967476] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 09:28:53.653722 [ 4.967616] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo Oct 3 09:28:53.665631 [ 4.990943] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Oct 3 09:28:53.677621 [ 5.018896] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 109,32 bit host data width,128 deep fifo Oct 3 09:28:53.713707 [ 5.046812] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 09:28:53.737687 [ 5.062849] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 09:28:53.749726 [ 5.066858] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 09:28:53.765747 [ 5.069692] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 09:28:53.765814 [ 5.086342] usb usb1: Product: EHCI Host Controller Oct 3 09:28:53.781744 [ 5.091202] usb usb1: Manufacturer: Linux 6.1.0-25-armmp-lpae ehci_hcd Oct 3 09:28:53.781808 [ 5.097711] usb usb1: SerialNumber: 12110000.usb Oct 3 09:28:53.781856 [ 5.102081] mmc_host mmc1: card is polling. Oct 3 09:28:53.793613 [ 5.111375] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 09:28:53.793673 [ 5.126303] hub 1-0:1.0: USB hub found Oct 3 09:28:53.817617 [ 5.132564] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 09:28:53.829592 [ 5.135243] hub 1-0:1.0: 3 ports detected Oct 3 09:28:53.829678 [ 5.172369] phy phy-12130000.phy.2: phy_power_on was called before phy_init Oct 3 09:28:53.865574 [ 5.192380] SCSI subsystem initialized Oct 3 09:28:53.877629 [ 5.196466] exynos-ohci 12120000.usb: USB Host Controller Oct 3 09:28:53.889586 [ 5.212674] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Oct 3 09:28:53.901581 [ 5.218958] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 09:28:53.913608 [ 5.247364] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Oct 3 09:28:53.937634 [ 5.248326] mmc0: new high speed SDHC card at address aaaa Oct 3 09:28:53.937695 [ 5.266974] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 09:28:53.961591 [ 5.277058] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 09:28:53.961627 [ 5.283049] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 09:28:53.973619 [ 5.313159] mmc1: new DDR MMC card at address 0001 Oct 3 09:28:53.997614 [ 5.319558] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 09:28:54.009710 [ 5.320890] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 09:28:54.021801 [ 5.332907] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 09:28:54.021865 [ 5.333966] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 09:28:54.033671 [ 5.341001] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Oct 3 09:28:54.045791 [ 5.348163] usb usb2: Product: USB Host Controller Oct 3 09:28:54.045850 [ 5.357032] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 09:28:54.057680 [ 5.361788] usb usb2: Manufacturer: Linux 6.1.0-25-armmp-lpae ohci_hcd Oct 3 09:28:54.057745 [ 5.377417] usb usb2: SerialNumber: 12120000.usb Oct 3 09:28:54.069665 [ 5.382984] mmcblk0: mmc0:aaaa SU04G 3.69 GiB Oct 3 09:28:54.069726 [ 5.390937] hub 2-0:1.0: USB hub found Oct 3 09:28:54.081667 [ 5.393278] hub 2-0:1.0: 3 ports detected Oct 3 09:28:54.081727 [ 5.398318] mmcblk1: mmc1:0001 M4G1FB 3.64 GiB Oct 3 09:28:54.081775 [ 5.405720] scsi host0: ahci-dwc Oct 3 09:28:54.093704 [ 5.408169] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 110 Oct 3 09:28:54.093775 [ 5.409220] mmcblk1: p1 p2 p3 p4 Oct 3 09:28:54.105706 [ 5.424477] mmcblk1boot0: mmc1:0001 M4G1FB 1.00 MiB Oct 3 09:28:54.117640 [ 5.434606] mmcblk1boot1: mmc1:0001 M4G1FB 1.00 MiB Oct 3 09:28:54.117703 [ 5.440636] mmcblk1rpmb: mmc1:0001 M4G1FB 128 KiB, chardev (241:0) Oct 3 09:28:54.129648 [ 5.683866] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 09:28:54.381535 [ 5.757309] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 09:28:54.453549 [ 5.865751] I/O error, dev mmcblk0, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 09:28:54.561547 [ 5.886807] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 09:28:54.573590 [ 5.892424] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 09:28:54.585857 [ 5.898221] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 09:28:54.585924 [ 5.905732] ata1.00: configured for UDMA/133 Oct 3 09:28:54.597649 [ 5.909650] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 09:28:54.597649 [ 5.960779] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 09:28:54.645654 [ 5.964846] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 09:28:54.657603 [ 5.973048] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 09:28:54.669578 [ 5.973742] I/O error, dev mmcblk0, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 09:28:54.669578 [ 5.981902] xhci-hcd xhci-hcd.2.auto: irq 111, io mem 0x12000000 Oct 3 09:28:54.681580 [ 5.999550] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 09:28:54.681580 [ 6.003796] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 09:28:54.693591 [ 6.011283] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 09:28:54.705591 [ 6.017913] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 09:28:54.705591 [ 6.026009] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 09:28:54.717615 [ 6.033214] usb usb3: Product: xHCI Host Controller Oct 3 09:28:54.717615 [ 6.038065] usb usb3: Manufacturer: Linux 6.1.0-25-armmp-lpae xhci-hcd Oct 3 09:28:54.729592 [ 6.044583] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 09:28:54.729592 [ 6.052531] hub 3-0:1.0: USB hub found Oct 3 09:28:54.741595 [ 6.054879] hub 3-0:1.0: 1 port detected Oct 3 09:28:54.741595 [ 6.060142] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 09:28:54.753601 [ 6.067091] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 09:28:54.753601 [ 6.075101] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 09:28:54.765602 [ 6.082267] usb usb4: Product: xHCI Host Controller Oct 3 09:28:54.765602 [ 6.087123] usb usb4: Manufacturer: Linux 6.1.0-25-armmp-lpae xhci-hcd Oct 3 09:28:54.777579 [ 6.091248] I/O error, dev mmcblk0, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 09:28:54.789593 [ 6.093627] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 09:28:54.789593 [ 6.108590] hub 4-0:1.0: USB hub found Oct 3 09:28:54.789593 [ 6.111570] hub 4-0:1.0: 1 port detected Oct 3 09:28:54.801547 [ 6.132908] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 09:28:54.825589 [ 6.139001] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 09:28:54.825589 [ 6.144319] sd 0:0:0:0: [sda] Write Protect is off Oct 3 09:28:54.837623 [ 6.149055] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 09:28:54.837623 [ 6.158113] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 09:28:54.849616 [ 6.180783] sda: sda1 sda2 < sda5 > Oct 3 09:28:54.861551 [ 6.183573] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 09:28:54.873542 [ 6.203022] I/O error, dev mmcblk0, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 09:28:54.897542 [ 6.311024] I/O error, dev mmcblk0, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 09:28:55.005545 [ 6.418977] I/O error, dev mmcblk0, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 09:28:55.113593 [ 6.526946] I/O error, dev mmcblk0, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 09:28:55.221535 [ 6.634911] I/O error, dev mmcblk0, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 09:28:55.329575 [ 7.043337] I/O error, dev mmcblk0, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 09:28:55.729819 [ 7.150934] I/O error, dev mmcblk0, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 09:28:55.841980 [ 7.222759] random: crng init done Oct 3 09:28:55.913545 [ 7.331825] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. Oct 3 09:28:56.021771 [ 7.342655] device-mapper: uevent: version 1.0.3 Oct 3 09:28:56.033604 [ 7.347402] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Oct 3 09:28:56.033701 [ 7.759023] Buffer I/O error on dev mmcblk0, logical block 968056, async page read Oct 3 09:28:56.449806 Begin: Loading essential drivers ... done. Oct 3 09:28:56.737632 Begin: Running /scripts/init-premount ... done. Oct 3 09:28:59.749766 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 09:28:59.749824 Begin: Running /scripts/local-premount ... done. Oct 3 09:28:59.821730 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 09:28:59.869723 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 09:28:59.977733 /dev/mapper/arndale--westfield--vg-root: clean, 39343/1220608 files, 378250/4882432 blocks Oct 3 09:29:00.181655 done. Oct 3 09:29:00.193591 [ 11.629214] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 09:29:00.313693 [ 11.821002] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 09:29:00.513683 done. Oct 3 09:29:00.513716 Begin: Running /scripts/local-bottom ... done. Oct 3 09:29:00.557789 Begin: Running /scripts/init-bottom ... done. Oct 3 09:29:00.593700 [ 12.132415] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. Oct 3 09:29:00.821854 INIT: version 3.06 booting Oct 3 09:29:01.121691 INIT: No inittab.d directory found Oct 3 09:29:01.217641 Using makefile-style concurrent boot in runlevel S. Oct 3 09:29:01.493604 Starting hotplug events dispatcher: systemd-udevd. Oct 3 09:29:03.185736 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 09:29:03.413742 Synthesizing the initial hotplug events (devices)...done. Oct 3 09:29:03.977870 Waiting for /dev to be fully populated...[ 15.516857] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 09:29:04.205679 [ 15.552701] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Oct 3 09:29:04.241727 [ 15.713138] sd 0:0:0:0: Attached scsi generic sg0 type 0 Oct 3 09:29:04.397641 [ 15.802788] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 09:29:04.497869 [ 15.803513] panfrost 11800000.gpu: clock rate = 533000000 Oct 3 09:29:04.497904 [ 15.858596] panfrost 11800000.gpu: mali-t600 id 0x600 major 0x0 minor 0x0 status 0x1 Oct 3 09:29:04.545755 [ 15.864938] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,31b4dfff Oct 3 09:29:04.557758 [ 15.871425] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 09:29:04.557798 [ 15.873047] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 Oct 3 09:29:04.569769 [ 15.894479] panfrost 11800000.gpu: shader_present=0xf l2_present=0x1 Oct 3 09:29:04.581682 [ 15.915152] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 0 Oct 3 09:29:04.605707 [ 15.954779] usb3503 usb-hub: switched to HUB mode Oct 3 09:29:04.641704 [ 15.958018] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 09:29:04.641738 [ 15.982970] blk_print_req_error: 6 callbacks suppressed Oct 3 09:29:04.665662 [ 15.982981] I/O error, dev mmcblk0, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 09:29:04.677591 [ 16.096366] I/O error, dev mmcblk0, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 09:29:04.785653 [ 16.204553] I/O error, dev mmcblk0, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 09:29:04.896759 [ 16.278786] usb 1-3: new high-speed USB device number 2 using exynos-ehci Oct 3 09:29:04.968806 [ 16.312620] I/O error, dev mmcblk0, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 09:29:05.004744 [ 16.420721] I/O error, dev mmcblk0, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 09:29:05.112831 [ 16.440742] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Oct 3 09:29:05.136803 [ 16.447589] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 3 09:29:05.136803 [ 16.456340] hub 1-3:1.0: USB hub found Oct 3 09:29:05.136803 [ 16.458904] hub 1-3:1.0: 3 ports detected Oct 3 09:29:05.148745 [ 16.475102] OF: graph: no port node found in /soc/hdmi@14530000 Oct 3 09:29:05.160798 [ 16.528907] I/O error, dev mmcblk0, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 09:29:05.220756 [ 16.637102] I/O error, dev mmcblk0, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 09:29:05.325725 [ 16.745496] I/O error, dev mmcblk0, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 09:29:05.433783 [ 16.754913] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 09:29:05.445687 [ 16.872608] usb 1-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=77.32 Oct 3 09:29:05.565809 [ 16.879601] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Oct 3 09:29:05.565896 [ 16.886867] usb 1-3.2: Product: USB2.0 Hub Oct 3 09:29:05.565958 [ 16.895084] hub 1-3.2:1.0: USB hub found Oct 3 09:29:05.577723 [ 16.898849] hub 1-3.2:1.0: 4 ports detected Oct 3 09:29:05.577787 [ 17.154578] I/O error, dev mmcblk0, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 09:29:05.841745 [ 17.190853] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 09:29:05.877721 [ 17.262418] I/O error, dev mmcblk0, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 09:29:05.949933 [ 17.304752] usb 1-3.2.4: New USB device found, idVendor=0b95, idProduct=772a, bcdDevice= 0.01 Oct 3 09:29:05.997884 [ 17.312010] usb 1-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Oct 3 09:29:05.997976 [ 17.319379] usb 1-3.2.4: Product: AX88772 Oct 3 09:29:06.009809 [ 17.323469] usb 1-3.2.4: Manufacturer: ASIX Elec. Corp. Oct 3 09:29:06.009902 [ 17.328671] usb 1-3.2.4: SerialNumber: 000001 Oct 3 09:29:06.021729 [ 17.889739] Buffer I/O error on dev mmcblk0, logical block 968056, async page read Oct 3 09:29:06.577745 [ 17.918379] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 09:29:06.617699 [ 18.597521] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 09:29:07.289676 [ 18.613069] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Oct 3 09:29:07.301667 [ 18.624928] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 9e:ee:03:67:b3:e2 Oct 3 09:29:07.313668 [ 18.641383] usbcore: registered new interface driver asix Oct 3 09:29:07.325642 done. Oct 3 09:29:07.625648 [ 19.503005] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 09:29:08.189755 Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). Oct 3 09:29:08.225631 Checking file systems.../dev/sda1: clean, 922/61056 files, 25402/243968 blocks Oct 3 09:29:09.869830 done. Oct 3 09:29:09.929727 Cleaning up temporary files... /tmp. Oct 3 09:29:10.205668 [ 21.771830] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 09:29:10.457827 [ 21.820595] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 09:29:10.505930 [ 22.031091] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k FS Oct 3 09:29:10.721874 Mounting local filesystems...done. Oct 3 09:29:11.093838 Activating swapfile swap, if any...done. Oct 3 09:29:11.093882 Cleaning up temporary files.... Oct 3 09:29:11.141592 Starting Setting kernel variables: sysctl. Oct 3 09:29:11.321561 [ 23.345984] audit: type=1400 audit(1727947751.900:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=899 comm="apparmor_parser" Oct 3 09:29:12.041798 [ 23.361072] audit: type=1400 audit(1727947751.908:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=899 comm="apparmor_parser" Oct 3 09:29:12.053792 [ 23.431449] audit: type=1400 audit(1727947751.988:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=898 comm="apparmor_parser" Oct 3 09:29:12.127428 [ 23.623061] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 09:29:12.312853 [ 23.817753] audit: type=1400 audit(1727947752.372:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=940 comm="apparmor_parser" Oct 3 09:29:12.521028 [ 23.836722] audit: type=1400 audit(1727947752.388:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=940 comm="apparmor_parser" Oct 3 09:29:12.532933 [ 23.850147] audit: type=1400 audit(1727947752.392:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=940 comm="apparmor_parser" Oct 3 09:29:12.542579 [ 24.043994] audit: type=1400 audit(1727947752.600:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=930 comm="apparmor_parser" Oct 3 09:29:12.754267 [ 24.062836] audit: type=1400 audit(1727947752.604:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=930 comm="apparmor_parser" Oct 3 09:29:12.757933 [ 24.078709] audit: type=1400 audit(1727947752.608:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=930 comm="apparmor_parser" Oct 3 09:29:12.783821 [ 24.096228] audit: type=1400 audit(1727947752.612:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=930 comm="apparmor_parser" Oct 3 09:29:12.796272 Starting: AppArmorLoading AppArmor profiles...done. Oct 3 09:29:12.924839 . Oct 3 09:29:12.924896 [ 25.768354] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 09:29:14.457683 [ 25.774517] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 3 09:29:14.469559 Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1 Oct 3 09:29:16.005725 Copyright 2004-2022 Internet Systems Consortium. Oct 3 09:29:16.017672 All rights reserved. Oct 3 09:29:16.017703 For info, please visit https://www.isc.org/software/dhcp/ Oct 3 09:29:16.017730 Oct 3 09:29:16.017750 Listening on LPF/eth0/a6:46:13:77:e8:2f Oct 3 09:29:16.029671 Sending on LPF/eth0/a6:46:13:77:e8:2f Oct 3 09:29:16.029704 Sending on Socket/fallback Oct 3 09:29:16.029728 Created duid "\000\001\000\001.\221 h\246F\023w\350/". Oct 3 09:29:16.041647 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 Oct 3 09:29:16.041681 [ 28.898614] exynos4-fb 14400000.fimd: deferred probe timeout, ignoring dependency Oct 3 09:29:17.589640 [ 28.913341] exynos-mixer 14450000.mixer: deferred probe timeout, ignoring dependency Oct 3 09:29:17.601673 [ 28.921892] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations Oct 3 09:29:17.613650 [ 28.928244] exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm]) Oct 3 09:29:17.613684 [ 28.936751] exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm]) Oct 3 09:29:17.625621 [ 28.946344] exynos-drm exynos-drm: bound 14500000.dsi (ops hdmi_enable [exynosdrm]) Oct 3 09:29:17.637653 [ 28.952969] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm]) Oct 3 09:29:17.649658 [ 28.961904] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 09:29:17.649700 [ 28.968216] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 09:29:17.661632 [ 28.976861] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 Oct 3 09:29:17.661664 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 Oct 3 09:29:18.453720 DHCPOFFER of 10.149.64.45 from 10.149.64.4 Oct 3 09:29:18.465734 DHCPREQUEST for 10.149.64.45 on eth0 to 255.255.255.255 port 67 Oct 3 09:29:18.465819 DHCPACK of 10.149.64.45 from 10.149.64.4 Oct 3 09:29:18.477697 bound to 10.149.64.45 -- renewal in 245 seconds. Oct 3 09:29:18.477758 done. Oct 3 09:29:18.477799 Cleaning up temporary files.... Oct 3 09:29:18.513684 Starting nftables: none Oct 3 09:29:18.645690 . Oct 3 09:29:19.065678 INIT: Entering runlevel: 2 Oct 3 09:29:19.137670 Using makefile-style concurrent boot in runlevel 2. Oct 3 09:29:19.185719 Starting Apache httpd web server: apache2. Oct 3 09:29:21.233680 Starting periodic command scheduler: cron. Oct 3 09:29:21.653614 Starting NTP server: ntpd2024-10-03T09:29:21 ntpd[1135]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 09:29:21.713649 2024-10-03T09:29:21 ntpd[1135]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 09:29:21.725651 . Oct 3 09:29:21.725651 Starting system message bus: dbus. Oct 3 09:29:21.941601 Starting OpenBSD Secure Shell server: sshd. Oct 3 09:29:22.625570 Oct 3 09:29:23.681717 Debian GNU/Linux 12 arndale-westfield ttySAC2 Oct 3 09:29:23.681777 Oct 3 09:29:23.681800 arndale-westfield login: INIT: Switching to r INIT: No inittab.d directorUsing makefile-style concurrent boot in runlevel 6. Oct 3 09:34:43.501753 Stopping libvirt management daemon: libvirtdNo /usr/local/sbin/libvirtd found running; none killed. Oct 3 09:34:43.549724 . Oct 3 09:34:43.549778 Stopping SMP IRQ Balancer: irqbalance. Oct 3 09:34:43.561734 Stopping hotplug events dispatcher: systemd-udevd. Oct 3 09:34:43.561796 Stopping nftables: none. Oct 3 09:34:43.585690 Saving the system clock to /dev/rtc0. Oct 3 09:34:44.233724 Hardware Clock updated to Thu Oct 3 09:34:44 UTC 2024. Oct 3 09:34:44.237303 Stopping Apache httpd web server: apache2. Oct 3 09:34:44.749710 Asking all remaining processes to terminate...done. Oct 3 09:34:45.061688 All processes ended within 1 seconds...done. Oct 3 09:34:45.073681 Deconfiguring network interfaces...ifdown: ignoring unknown interface eth0=eth0 Oct 3 09:34:45.217713 done. Oct 3 09:34:45.217767 [ 356.782237] EXT4-fs (sda1): unmounting filesystem. Oct 3 09:34:45.469696 Deactivating swap...done. Oct 3 09:34:45.529708 Unmounting local filesystems...done. Oct 3 09:34:45.541692 [ 357.108069] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 09:34:45.793790 Will now restart. Oct 3 09:34:46.069742 [ 357.412320] asix 1-3.2.4:1.0 eth0: Link is Down Oct 3 09:34:46.093767 [ 357.482811] sd 0:0:0:0: [sda] Synchronizing SCSI cache Oct 3 09:34:46.165781 [ 357.490505] wake enabled for irq 101 (gpx1-4) Oct 3 09:34:46.177808 [ 357.493422] wake enabled for irq 102 (gpx1-5) Oct 3 09:34:46.177870 [ 357.497749] wake enabled for irq 103 (gpx1-6) Oct 3 09:34:46.177917 [ 357.502087] wake enabled for irq 104 (gpx1-7) Oct 3 09:34:46.189802 [ 357.506427] wake enabled for irq 105 (gpx2-0) Oct 3 09:34:46.189863 [ 357.510766] wake enabled for irq 106 (gpx2-1) Oct 3 09:34:46.189911 [ 357.515595] reboot: Reű Oct 3 09:34:46.537809 Oct 3 09:34:46.537862 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 09:34:46.537915 Oct 3 09:34:46.537953 CPU: Exynos5250@1000MHz Oct 3 09:34:46.537996 Oct 3 09:34:46.538034 Board: Arndale Oct 3 09:34:46.538075 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 09:34:46.549763 ready Oct 3 09:34:46.549817 DRAM: 2 GiB Oct 3 09:34:46.549859 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 09:34:46.561771 trace: enabled Oct 3 09:34:46.597752 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 09:34:46.957748 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 09:34:47.017795 In: serial Oct 3 09:34:47.017850 Out: serial Oct 3 09:34:47.017892 Err: serial Oct 3 09:34:47.029773 SCSI: ARNDALE SCSI INIT Oct 3 09:34:47.029831 Target spinup took 0 ms. Oct 3 09:34:47.029876 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 09:34:47.041813 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 09:34:47.041904 Net: Net Initialization Skipped Oct 3 09:34:47.041952 No ethernet found. Oct 3 09:34:47.041993 Hostname: arndale-westfield Oct 3 09:34:47.053690 Hit any key to stop autoboot: 2  1  0 Oct 3 09:34:48.973726 (Re)start USB... Oct 3 09:34:48.973790 USB0: USB EHCI 1.00 Oct 3 09:34:48.973835 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 09:34:54.573743 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 09:34:54.585732 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 09:34:55.029716 Waiting for Ethernet connection... done. Oct 3 09:34:56.625720 BOOTP broadcast 1 Oct 3 09:34:56.625785 EHCI timed out on TD - token=0x8008d80 Oct 3 09:35:01.425680 BOOTP broadcast 2 Oct 3 09:35:01.425723 DHCP client bound to address 10.149.64.45 (5006 ms) Oct 3 09:35:01.437676 Using asx0 device Oct 3 09:35:01.437706 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 09:35:01.437734 Filename 'pxelinux.0'. Oct 3 09:35:01.449631 Load address: 0x43e00000 Oct 3 09:35:01.449656 Loading: *### Oct 3 09:35:01.461620 2.4 MiB/s Oct 3 09:35:01.461651 done Oct 3 09:35:01.461673 Bytes transferred = 42430 (a5be hex) Oct 3 09:35:01.473683 missing environment variable: pxeuuid Oct 3 09:35:01.473716 Retrieving file: pxelinux.cfg/0A95402D Oct 3 09:35:01.473742 Using asx0 device Oct 3 09:35:01.473764 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 09:35:01.485673 Filename 'pxelinux.cfg/0A95402D'. Oct 3 09:35:01.485700 Load address: 0x51000000 Oct 3 09:35:01.485724 Loading: *# Oct 3 09:35:01.485746 31.3 KiB/s Oct 3 09:35:01.485769 done Oct 3 09:35:01.485790 Bytes transferred = 65 (41 hex) Oct 3 09:35:01.497661 Config file found Oct 3 09:35:01.497685 Ignoring unknown command: serial Oct 3 09:35:01.497710 1: local Oct 3 09:35:01.497732 scanning bus for devices... Oct 3 09:35:01.497756 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 09:35:01.533672 Type: Hard Disk Oct 3 09:35:01.533703 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 09:35:01.545676 Found 1 device(s). Oct 3 09:35:01.545703 Oct 3 09:35:01.545725 SCSI device 0: Oct 3 09:35:01.545747 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 09:35:01.545775 Type: Hard Disk Oct 3 09:35:01.557635 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 09:35:01.557665 ... is now current device Oct 3 09:35:01.557690 Scanning scsi 0... Oct 3 09:35:01.557713 Found U-Boot script /boot.scr Oct 3 09:35:01.737623 1742 bytes read in 34 ms (49.8 KiB/s) Oct 3 09:35:01.785642 ## Executing script at 50000000 Oct 3 09:35:01.785675 Loading dtbs/6.1.112+/exynos5250-arndale.dtb Oct 3 09:35:01.785701 46686 bytes read in 3236 ms (13.7 KiB/s) Oct 3 09:35:04.917636 1081360 bytes read in 101 ms (10.2 MiB/s) Oct 3 09:35:05.037657 Loaded xen-4.20-unstable to 0x41000000 (108010) Oct 3 09:35:05.037691 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan Oct 3 09:35:05.049657 10039808 bytes read in 422 ms (22.7 MiB/s) Oct 3 09:35:05.481680 Loaded vmlinuz-6.1.112+ to 0x42000000 (993200) Oct 3 09:35:05.481722 command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 09:35:05.505878 12059111 bytes read in 635 ms (18.1 MiB/s) Oct 3 09:35:06.129768 Loaded initrd.img-6.1.112+ to 0x43300000 (b801e7) Oct 3 09:35:06.129849 chosen { Oct 3 09:35:06.129891 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan"; Oct 3 09:35:06.141817 #size-cells = <0x00000001>; Oct 3 09:35:06.153800 #address-cells = <0x00000001>; Oct 3 09:35:06.153800 stdout-path = "serial2:115200n8"; Oct 3 09:35:06.153851 module@1 { Oct 3 09:35:06.153893 reg = <0x43300000 0x00b801e7>; Oct 3 09:35:06.153968 compatible = "xen,linux-initrd", "xen,multiboot-module"; Oct 3 09:35:06.165755 }; Oct 3 09:35:06.165772 module@0 { Oct 3 09:35:06.165809 bootargs = "ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Oct 3 09:35:06.177770 reg = <0x42000000 0x00993200>; Oct 3 09:35:06.189767 compatible = "xen,linux-zimage", "xen,multiboot-module"; Oct 3 09:35:06.189822 }; Oct 3 09:35:06.189862 }; Oct 3 09:35:06.189900 Booting 0x41000000 - 0x43000000 Oct 3 09:35:06.189943 Kernel image @ 0x41000000 [ 0x000000 - 0x144000 ] Oct 3 09:35:06.201742 ## Flattened Device Tree blob at 43000000 Oct 3 09:35:06.201753 Booting using the fdt blob at 0x43000000 Oct 3 09:35:06.201799 reserving fdt memory region: addr=43000000 size=c000 Oct 3 09:35:06.213715 Loading Device Tree to 4fff1000, end 4fffffff ... OK Oct 3 09:35:06.213736 Oct 3 09:35:06.213777 Starting kernel ...(fake run for tracing) Oct 3 09:35:06.225716 Oct 3 09:35:06.225716 Oct 3 09:35:06.225751 Starting kernel ... Oct 3 09:35:06.225792 Oct 3 09:35:06.225830 __ __ _ _ ____ ___ _ _ _ Oct 3 09:35:06.273719 \ \/ /___ _ __ | || | |___ \ / _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Oct 3 09:35:06.285752 \ // _ \ '_ \ | || |_ __) | | | |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Oct 3 09:35:06.297781 / \ __/ | | | |__ _| / __/| |_| |__| |_| | | | \__ \ || (_| | |_) | | __/ Oct 3 09:35:06.297790 /_/\_\___|_| |_| |_|(_)_____|\___/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Oct 3 09:35:06.309822 Oct 3 09:35:06.309822 (XEN) Xen version 4.20-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Thu Oct 3 04:21:25 UTC 2024 Oct 3 09:35:06.321778 (XEN) Latest ChangeSet: Fri Feb 17 17:01:22 2023 +0000 git:41190d2ceb Oct 3 09:35:06.321821 (XEN) build-id: 0a6b28d2d81aa30d09bfdfdea57218d3715bb897 Oct 3 09:35:06.333912 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Oct 3 09:35:06.333936 (XEN) 32-bit Execution: Oct 3 09:35:06.333936 (XEN) Processor Features: 00001031:00011011 Oct 3 09:35:06.345743 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Oct 3 09:35:06.345757 (XEN) Extensions: GenericTimer Security Oct 3 09:35:06.357737 (XEN) Debug Features: 02010555 Oct 3 09:35:06.357749 (XEN) Auxiliary Features: 00000000 Oct 3 09:35:06.357794 (XEN) Memory Model Features: 10201105 20000000 Oct 3 09:35:06.357840 (XEN) 01240000 02102211 Oct 3 09:35:06.369744 (XEN) ISA Features: 02101110 13112111 21232041 Oct 3 09:35:06.369758 (XEN) 11112131 10011142 00000000 Oct 3 09:35:06.369804 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Oct 3 09:35:06.381926 (XEN) Set SYSRAM to 0000000041000070 (00200070) Oct 3 09:35:06.393958 (XEN) SMP: Allowing 2 CPUs Oct 3 09:35:06.394015 (XEN) enabled workaround for: ARM erratum 766422 Oct 3 09:35:06.394063 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Oct 3 09:35:06.405945 (XEN) GICv2 initialization: Oct 3 09:35:06.406002 (XEN) gic_dist_addr=0000000010481000 Oct 3 09:35:06.406049 (XEN) gic_cpu_addr=0000000010482000 Oct 3 09:35:06.417872 (XEN) gic_hyp_addr=0000000010484000 Oct 3 09:35:06.417904 (XEN) gic_vcpu_addr=0000000010486000 Oct 3 09:35:06.417929 (XEN) gic_maintenance_irq=25 Oct 3 09:35:06.429948 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Oct 3 09:35:06.430011 (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2) Oct 3 09:35:06.430059 (XEN) Initializing Credit2 scheduler Oct 3 09:35:06.441901 (XEN) load_precision_shift: 18 Oct 3 09:35:06.441958 (XEN) load_window_shift: 30 Oct 3 09:35:06.442002 (XEN) underload_balance_tolerance: 0 Oct 3 09:35:06.442068 (XEN) overload_balance_tolerance: -3 Oct 3 09:35:06.453955 (XEN) runqueues arrangement: socket Oct 3 09:35:06.454014 (XEN) cap enforcement granularity: 10ms Oct 3 09:35:06.454060 (XEN) load tracking window length 1073741824 ns Oct 3 09:35:06.465967 (XEN) Allocated console ring of 16 KiB. Oct 3 09:35:06.466026 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Oct 3 09:35:06.466077 (XEN) CPU0: Guest atomics will try 1 times before pausing the domain Oct 3 09:35:06.477950 (XEN) Bringing up CPU1 Oct 3 09:35:06.478006 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Oct 3 09:35:06.489919 (XEN) Brought up 2 CPUs Oct 3 09:35:06.489967 (XEN) CPU 1 booted. Oct 3 09:35:06.490009 (XEN) I/O virtualisation disabled Oct 3 09:35:06.490053 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Oct 3 09:35:06.501896 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Oct 3 09:35:06.501939 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Oct 3 09:35:06.501983 (XEN) Initializing Credit2 scheduler Oct 3 09:35:06.513969 (XEN) load_precision_shift: 18 Oct 3 09:35:06.514026 (XEN) load_window_shift: 30 Oct 3 09:35:06.514069 (XEN) underload_balance_tolerance: 0 Oct 3 09:35:06.514113 (XEN) overload_balance_tolerance: -3 Oct 3 09:35:06.525969 (XEN) runqueues arrangement: socket Oct 3 09:35:06.526027 (XEN) cap enforcement granularity: 10ms Oct 3 09:35:06.526073 (XEN) load tracking window length 1073741824 ns Oct 3 09:35:06.537967 (XEN) Adding cpu 0 to runqueue 0 Oct 3 09:35:06.538024 (XEN) First cpu on runqueue, activating Oct 3 09:35:06.538070 (XEN) Adding cpu 1 to runqueue 0 Oct 3 09:35:06.538112 (XEN) alternatives: Patching with alt table 002d2f0c -> 002d2fe4 Oct 3 09:35:06.549929 (XEN) CPU0 will execute ICIALLU on guest exit Oct 3 09:35:06.549985 (XEN) CPU1 will execute ICIALLU on guest exit Oct 3 09:35:06.561809 (XEN) *** LOADING DOMAIN 0 *** Oct 3 09:35:06.561809 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Oct 3 09:35:06.561852 (XEN) Loading ramdisk from boot module @ 0000000043300000 Oct 3 09:35:06.573773 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Oct 3 09:35:06.573790 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Oct 3 09:35:07.125771 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Oct 3 09:35:07.137789 (XEN) Allocating PPI 16 for event channel interrupt Oct 3 09:35:07.161995 (XEN) d0: extended regions not supported for 32-bit guests Oct 3 09:35:07.173928 (XEN) Loading zImage from 0000000042000000 to 0000000067600000-0000000067f93200 Oct 3 09:35:07.173988 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d801e7 Oct 3 09:35:07.269732 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b4c2 Oct 3 09:35:07.377820 (XEN) Initial low memory virq threshold set at 0x4000 pages. Oct 3 09:35:07.377827 (XEN) Scrubbing Free RAM in background Oct 3 09:35:07.377873 (XEN) Std. Loglevel: All Oct 3 09:35:07.377915 (XEN) Guest Loglevel: All Oct 3 09:35:07.389877 (XEN) *************************************************** Oct 3 09:35:07.389877 (XEN) WARNING: SILO mode is not enabled. Oct 3 09:35:07.389877 (XEN) It has implications on the security of the system, Oct 3 09:35:07.401808 (XEN) unless the communications have been forbidden between Oct 3 09:35:07.401828 (XEN) untrusted domains. Oct 3 09:35:07.401871 (XEN) *************************************************** Oct 3 09:35:07.413754 (XEN) 3... 2... 1... Oct 3 09:35:10.405257 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 09:35:10.420594 (XEN) Freed 356kB init memory. Oct 3 09:35:10.420594 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 09:35:11.488965 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Oct 3 09:35:11.501056 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Oct 3 09:35:11.512971 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Oct 3 09:35:11.513067 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Oct 3 09:35:11.524854 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 09:35:11.524854 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 09:35:11.572864 [ 0.000000] Linux version 6.1.112+ (osstest@himrod0) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Thu Oct 3 02:31:58 UTC 2024 Oct 3 09:35:11.584873 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 09:35:11.596828 [ 0.000000] CPU: div instructions available: patching division code Oct 3 09:35:11.596828 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 09:35:11.608870 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 09:35:11.608870 [ 0.000000] Memory policy: Data cache writealloc Oct 3 09:35:11.620876 [ 0.000000] Xen 4.20 support found Oct 3 09:35:11.620876 [ 0.000000] efi: UEFI not found. Oct 3 09:35:11.620876 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 Oct 3 09:35:11.632869 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 09:35:11.632869 [ 0.000000] Zone ranges: Oct 3 09:35:11.632869 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Oct 3 09:35:11.644872 [ 0.000000] Normal empty Oct 3 09:35:11.644872 [ 0.000000] HighMem empty Oct 3 09:35:11.644872 [ 0.000000] Movable zone start for each node Oct 3 09:35:11.656869 [ 0.000000] Early memory node ranges Oct 3 09:35:11.656869 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Oct 3 09:35:11.656869 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Oct 3 09:35:11.668891 [ 0.000000] psci: probing for conduit method from DT. Oct 3 09:35:11.680873 [ 0.000000] psci: PSCIv1.1 detected in firmware. Oct 3 09:35:11.680873 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Oct 3 09:35:11.680873 [ 0.000000] psci: Trusted OS migration not required Oct 3 09:35:11.692872 [ 0.000000] psci: SMC Calling Convention v1.2 Oct 3 09:35:11.692872 [ 0.000000] percpu: Embedded 16 pages/cpu s35412 r8192 d21932 u65536 Oct 3 09:35:11.704868 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 Oct 3 09:35:11.704868 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 09:35:11.728868 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 09:35:11.728868 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Oct 3 09:35:11.740877 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Oct 3 09:35:11.752866 [ 0.000000] Memory: 416844K/524288K available (14336K kernel code, 2180K rwdata, 5604K rodata, 2048K init, 438K bss, 41908K reserved, 65536K cma-reserved, 0K highmem) Oct 3 09:35:11.764864 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 09:35:11.764864 [ 0.000000] trace event string verifier disabled Oct 3 09:35:11.776866 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 09:35:11.776866 [ 0.000000] rcu: RCU event tracing is enabled. Oct 3 09:35:11.788866 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Oct 3 09:35:11.788866 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Oct 3 09:35:11.800818 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 09:35:11.800818 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 09:35:11.812878 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 09:35:11.812878 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 09:35:11.824875 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Oct 3 09:35:11.824875 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 09:35:11.836869 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 09:35:11.848872 [ 0.000012] Switching to timer-based delay loop, resolution 41ns Oct 3 09:35:11.848872 [ 0.000501] Console: colour dummy device 80x30 Oct 3 09:35:11.860874 [ 0.293141] printk: console [hvc0] enabled Oct 3 09:35:11.860874 [ 0.297349] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Oct 3 09:35:11.872875 [ 0.307752] CPU: Testing write buffer coherency: ok Oct 3 09:35:11.872875 [ 0.312675] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 09:35:11.884877 [ 0.322228] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 09:35:11.896873 [ 0.328642] pid_max: default: 32768 minimum: 301 Oct 3 09:35:11.896873 [ 0.333435] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 09:35:11.908881 [ 0.340709] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 09:35:11.908881 [ 0.349125] /cpus/cpu@0 missing clock-frequency property Oct 3 09:35:11.920888 [ 0.353911] /cpus/cpu@1 missing clock-frequency property Oct 3 09:35:11.920888 [ 0.359305] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 09:35:11.932868 [ 0.365815] xen:grant_table: Grant tables using version 1 layout Oct 3 09:35:11.932868 [ 0.371155] Grant table initialized Oct 3 09:35:11.944860 [ 0.374695] xen:events: Using FIFO-based ABI Oct 3 09:35:11.944860 [ 0.379013] Xen: initializing cpu0 Oct 3 09:35:11.944969 [ 0.382542] Setting up static identity map for 0x60300000 - 0x603000ac Oct 3 09:35:11.956877 [ 0.390274] rcu: Hierarchical SRCU implementation. Oct 3 09:35:11.956877 [ 0.393929] rcu: Max phase no-delay instances is 1000. Oct 3 09:35:11.968862 [ 0.401980] EFI services will not be available. Oct 3 09:35:11.968862 [ 0.405283] smp: Bringing up secondary CPUs ... Oct 3 09:35:11.980791 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 09:35:12.040842 [ 0.479794] Xen: initializing cpu1 Oct 3 09:35:12.052796 [ 0.479954] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 09:35:12.052796 [ 0.479982] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 09:35:12.064875 [ 0.498857] smp: Brought up 1 node, 2 CPUs Oct 3 09:35:12.064875 [ 0.502624] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 09:35:12.076865 [ 0.508935] CPU: All CPU(s) started in SVC mode. Oct 3 09:35:12.076865 [ 0.514347] devtmpfs: initialized Oct 3 09:35:12.076865 [ 0.526933] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 09:35:12.100869 [ 0.533416] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Oct 3 09:35:12.112879 [ 0.543139] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 09:35:12.112879 [ 0.551140] pinctrl core: initialized pinctrl subsystem Oct 3 09:35:12.124873 [ 0.557700] DMI not present or invalid. Oct 3 09:35:12.124873 [ 0.560802] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 09:35:12.136857 [ 0.567984] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 09:35:12.136857 [ 0.576756] thermal_sys: Registered thermal governor 'step_wise' Oct 3 09:35:12.148874 [ 0.576886] software IO TLB: area num 2. Oct 3 09:35:12.148874 [ 0.585577] software IO TLB: only able to allocate 8 MB Oct 3 09:35:12.160912 [ 0.592705] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Oct 3 09:35:12.160921 [ 0.597887] No ATAGs? Oct 3 09:35:12.160987 [ 0.600237] hw-breakpoint: Failed to enable monitor mode on CPU 0. Oct 3 09:35:12.172854 [ 0.608755] Serial: AMBA PL011 UART driver Oct 3 09:35:12.172854 [ 0.630893] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 62 Oct 3 09:35:12.196845 [ 0.680331] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 09:35:12.256811 [ 0.705910] xen:balloon: Initialising balloon driver Oct 3 09:35:12.280855 [ 0.713435] iommu: Default domain type: Translated Oct 3 09:35:12.280855 [ 0.716934] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 09:35:12.292871 [ 0.723888] SCSI subsystem initialized Oct 3 09:35:12.292871 [ 0.727438] usbcore: registered new interface driver usbfs Oct 3 09:35:12.292871 [ 0.732678] usbcore: registered new interface driver hub Oct 3 09:35:12.304877 [ 0.738070] usbcore: registered new device driver usb Oct 3 09:35:12.304877 [ 0.744708] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 09:35:12.316875 [ 0.748324] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 09:35:12.316875 [ 0.754625] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 09:35:12.328870 [ 0.763067] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 09:35:12.340885 [ 0.772205] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 09:35:12.340885 [ 0.777724] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 09:35:12.357021 [ 0.782410] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 09:35:12.357098 [ 0.788677] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 09:35:12.357146 [ 0.793892] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 09:35:12.368871 [ 0.798663] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 09:35:12.368871 [ 0.804781] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 09:35:12.380966 [ 0.809974] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 09:35:12.381032 [ 0.814873] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 09:35:12.381083 [ 0.820905] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 09:35:12.392878 [ 0.826677] pps_core: LinuxPPS API ver. 1 registered Oct 3 09:35:12.392878 [ 0.831115] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 09:35:12.404885 [ 0.840315] PTP clock support registered Oct 3 09:35:12.404885 [ 0.852483] EDAC MC: Ver: 3.0.0 Oct 3 09:35:12.416981 [ 0.862428] vgaarb: loaded Oct 3 09:35:12.428846 [ 0.868067] clocksource: Switched to clocksource arch_sys_counter Oct 3 09:35:12.440853 [ 0.879538] NET: Registered PF_INET protocol family Oct 3 09:35:12.452875 [ 0.883179] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Oct 3 09:35:12.452875 [ 0.891089] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 09:35:12.464868 [ 0.898779] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 09:35:12.476887 [ 0.906570] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Oct 3 09:35:12.476887 [ 0.914421] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Oct 3 09:35:12.488880 [ 0.921711] TCP: Hash tables configured (established 4096 bind 4096) Oct 3 09:35:12.488880 [ 0.928072] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 09:35:12.500861 [ 0.934616] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 09:35:12.512856 [ 0.941754] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 09:35:12.512856 [ 0.951138] RPC: Registered named UNIX socket transport module. Oct 3 09:35:12.524872 [ 0.955677] RPC: Registered udp transport module. Oct 3 09:35:12.524872 [ 0.960468] RPC: Registered tcp transport module. Oct 3 09:35:12.536879 [ 0.965224] RPC: Registered tcp NFSv4.1 backchannel transport module. Oct 3 09:35:12.536879 [ 0.971750] PCI: CLS 0 bytes, default 64 Oct 3 09:35:12.536879 [ 0.977041] Initialise system trusted keyrings Oct 3 09:35:12.546829 [ 0.980403] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Oct 3 09:35:12.546829 [ 0.991938] squashfs: version 4.0 (2009/01/31) Phillip Lougher Oct 3 09:35:12.560877 [ 0.996956] NFS: Registering the id_resolver key type Oct 3 09:35:12.572885 [ 1.001561] Key type id_resolver registered Oct 3 09:35:12.572885 [ 1.003131] Trying to unpack rootfs image as initramfs... Oct 3 09:35:12.572885 [ 1.005776] Key type id_legacy registered Oct 3 09:35:12.584892 [ 1.015426] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Oct 3 09:35:12.584892 [ 1.022113] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Oct 3 09:35:12.596828 [ 1.069483] Key type asymmetric registered Oct 3 09:35:12.632840 [ 1.072209] Asymmetric key parser 'x509' registered Oct 3 09:35:12.644890 [ 1.077271] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 09:35:12.644890 [ 1.084633] io scheduler mq-deadline registered Oct 3 09:35:12.656851 [ 1.089236] io scheduler kyber registered Oct 3 09:35:12.656851 [ 1.099304] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 09:35:12.668867 [ 1.184605] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 09:35:12.752855 [ 1.190844] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 09:35:12.764854 [ 1.219650] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 09:35:12.788897 [ 1.225871] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 09:35:12.800854 [ 1.262982] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 09:35:12.836893 [ 1.269264] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 09:35:12.848820 [ 1.303153] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 09:35:12.872884 [ 1.309442] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 09:35:12.884842 [ 1.347758] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 09:35:12.920849 [ 1.434552] xen:xen_evtchn: Event-channel device installed Oct 3 09:35:13.004840 [ 1.582645] Freeing initrd memory: 11780K Oct 3 09:35:13.148835 [ 1.609051] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 09:35:13.184874 [ 1.617719] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 113, base_baud = 0) is a S3C6400/10 Oct 3 09:35:13.196845 [ 1.625785] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 114, base_baud = 0) is a S3C6400/10 Oct 3 09:35:13.196845 [ 1.634773] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 115, base_baud = 0) is a S3C6400/10 Oct 3 09:35:13.208885 [ 1.644093] SuperH (H)SCI(F) driver initialized Oct 3 09:35:13.208885 [ 1.649018] STMicroelectronics ASC driver initialized Oct 3 09:35:13.220849 [ 1.654307] STM32 USART driver initialized Oct 3 09:35:13.220849 [ 1.668937] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 09:35:13.244819 [ 1.705096] brd: module loaded Oct 3 09:35:13.268833 [ 1.711037] loop: module loaded Oct 3 09:35:13.280808 [ 1.728127] Invalid max_queues (4), will use default max: 2. Oct 3 09:35:13.292827 [ 1.754671] tun: Universal TUN/TAP device driver, 1.6 Oct 3 09:35:13.328883 [ 1.758595] CAN device driver interface Oct 3 09:35:13.328883 [ 1.763628] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Oct 3 09:35:13.328883 [ 1.774098] xen_netfront: Initialising Xen virtual ethernet driver Oct 3 09:35:13.340856 [ 1.779027] pegasus: Pegasus/Pegasus II USB Ethernet driver Oct 3 09:35:13.356904 [ 1.784568] usbcore: registered new interface driver pegasus Oct 3 09:35:13.356904 [ 1.790315] usbcore: registered new interface driver asix Oct 3 09:35:13.356904 [ 1.795781] usbcore: registered new interface driver ax88179_178a Oct 3 09:35:13.368892 [ 1.801934] usbcore: registered new interface driver cdc_ether Oct 3 09:35:13.368892 [ 1.807838] usbcore: registered new interface driver smsc75xx Oct 3 09:35:13.380886 [ 1.813671] usbcore: registered new interface driver smsc95xx Oct 3 09:35:13.380886 [ 1.819469] usbcore: registered new interface driver net1080 Oct 3 09:35:13.392887 [ 1.825210] usbcore: registered new interface driver cdc_subset Oct 3 09:35:13.392887 [ 1.831188] usbcore: registered new interface driver zaurus Oct 3 09:35:13.404876 [ 1.836826] usbcore: registered new interface driver cdc_ncm Oct 3 09:35:13.404876 [ 1.846101] usbcore: registered new interface driver usb-storage Oct 3 09:35:13.416839 [ 1.880475] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 09:35:13.450848 [ 1.889283] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T09:35:14 UTC (1727948114) Oct 3 09:35:13.464966 [ 1.897805] i2c_dev: i2c /dev entries driver Oct 3 09:35:13.464966 [ 1.908108] syscon-poweroff 10040000.system-controller:syscon-poweroff: pm_power_off already claimed for psci_sys_poweroff Oct 3 09:35:13.488885 [ 1.917787] syscon-poweroff: probe of 10040000.system-controller:syscon-poweroff failed with error -16 Oct 3 09:35:13.488885 [ 1.929065] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 09:35:13.500856 [ 1.939887] device-mapper: uevent: version 1.0.3 Oct 3 09:35:13.512867 [ 1.943347] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Oct 3 09:35:13.512867 [ 1.952331] cpu cpu0: OPP table can't be empty Oct 3 09:35:13.525008 [ 1.957326] failed to register cpuidle driver Oct 3 09:35:13.525075 [ 1.960592] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Oct 3 09:35:13.536882 [ 1.968884] sdhci: Secure Digital Host Controller Interface driver Oct 3 09:35:13.536882 [ 1.973936] sdhci: Copyright(c) Pierre Ossman Oct 3 09:35:13.548855 [ 1.981922] sdhci-pltfm: SDHCI platform and OF driver helper Oct 3 09:35:13.548855 [ 1.989615] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 09:35:13.560894 [ 1.994900] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Oct 3 09:35:13.560894 [ 2.001563] usbcore: registered new interface driver usbhid Oct 3 09:35:13.572867 [ 2.006412] usbhid: USB HID core driver Oct 3 09:35:13.572867 [ 2.017213] NET: Registered PF_INET6 protocol family Oct 3 09:35:13.584871 [ 2.021824] Segment Routing with IPv6 Oct 3 09:35:13.584871 [ 2.024566] In-situ OAM (IOAM) with IPv6 Oct 3 09:35:13.596923 [ 2.028634] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Oct 3 09:35:13.596923 [ 2.034969] NET: Registered PF_PACKET protocol family Oct 3 09:35:13.608979 [ 2.039699] can: controller area network core Oct 3 09:35:13.608979 [ 2.044101] NET: Registered PF_CAN protocol family Oct 3 09:35:13.608979 [ 2.048960] can: raw protocol Oct 3 09:35:13.620884 [ 2.051964] can: broadcast manager protocol Oct 3 09:35:13.620884 [ 2.056240] can: netlink gateway - max_hops=1 Oct 3 09:35:13.620884 [ 2.060913] Key type dns_resolver registered Oct 3 09:35:13.632884 [ 2.065564] ThumbEE CPU extension supported. Oct 3 09:35:13.632884 [ 2.069372] Registering SWP/SWPB emulation handler Oct 3 09:35:13.644846 [ 2.074627] Loading compiled-in X.509 certificates Oct 3 09:35:13.644846 [ 2.103131] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 09:35:13.668863 [ 2.109259] clk: Not disabling unused clocks Oct 3 09:35:13.680873 [ 2.116191] Freeing unused kernel image (initmem) memory: 2048K Oct 3 09:35:13.680873 [ 2.122296] Run /init as init process Oct 3 09:35:13.692820 Loading, please wait... Oct 3 09:35:13.716971 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 09:35:13.788902 [ 3.554203] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 09:35:15.132868 [ 3.561589] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 09:35:15.132868 [ 3.576704] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 09:35:15.144860 [ 3.593248] phy phy-12130000.phy.9: phy_power_on was called before phy_init Oct 3 09:35:15.168844 [ 3.598886] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 09:35:15.168844 [ 3.604420] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Oct 3 09:35:15.180918 [ 3.614709] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 Oct 3 09:35:15.180918 [ 3.624380] phy phy-12130000.phy.9: phy_power_on was called before phy_init Oct 3 09:35:15.192875 [ 3.630014] exynos-ohci 12120000.usb: USB Host Controller Oct 3 09:35:15.204882 [ 3.635459] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Oct 3 09:35:15.204882 [ 3.649305] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 09:35:15.216845 [ 3.654477] Synopsys Designware Multimedia Card Interface Driver Oct 3 09:35:15.228841 [ 3.665693] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 09:35:15.241024 [ 3.673776] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 09:35:15.252866 [ 3.684701] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 09:35:15.252866 [ 3.694953] hub 1-0:1.0: USB hub found Oct 3 09:35:15.264998 [ 3.698463] hub 1-0:1.0: 3 ports detected Oct 3 09:35:15.265017 [ 3.713269] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 09:35:15.276848 [ 3.719859] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 Oct 3 09:35:15.288911 [ 3.733234] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 09:35:15.300892 [ 3.770962] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 09:35:15.340872 [ 3.779278] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 09:35:15.353019 [ 3.783855] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Oct 3 09:35:15.353087 [ 3.784973] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Oct 3 09:35:15.364875 [ 3.799565] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 09:35:15.376878 [ 3.812973] s3c-rtc 101e0000.rtc: registered as rtc1 Oct 3 09:35:15.376878 [ 3.815695] hub 2-0:1.0: USB hub found Oct 3 09:35:15.388831 [ 3.839895] hub 2-0:1.0: 3 ports detected Oct 3 09:35:15.412820 [ 3.895999] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 09:35:15.460839 [ 3.901159] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 09:35:15.472870 [ 3.906683] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo Oct 3 09:35:15.484887 [ 3.916492] mmc_host mmc0: card is polling. Oct 3 09:35:15.484887 [ 3.920998] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 09:35:15.496955 [ 3.926867] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 09:35:15.496955 [ 3.932495] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 127,32 bit host data width,128 deep fifo Oct 3 09:35:15.508869 [ 3.932746] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 09:35:15.520811 [ 3.968414] scsi host0: ahci-dwc Oct 3 09:35:15.532965 [ 3.971279] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 129 Oct 3 09:35:15.544847 [ 4.010001] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 09:35:15.581008 [ 4.062340] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 09:35:15.640888 [ 4.071211] mmc0: new DDR MMC card at address 0001 Oct 3 09:35:15.640888 [ 4.077092] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Oct 3 09:35:15.640888 [ 4.083805] mmcblk0: p1 p2 p3 p4 Oct 3 09:35:15.652859 [ 4.087579] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Oct 3 09:35:15.652859 [ 4.101458] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Oct 3 09:35:15.664823 [ 4.105112] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 09:35:15.676900 [ 4.115490] mmc1: new high speed SDHC card at address aaaa Oct 3 09:35:15.688874 [ 4.120774] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Oct 3 09:35:15.688874 [ 4.121426] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Oct 3 09:35:15.700821 [ 4.478193] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 09:35:16.045722 [ 4.483942] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 09:35:16.057700 [ 4.489831] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 09:35:16.057735 [ 4.497563] ata1.00: configured for UDMA/133 Oct 3 09:35:16.057761 [ 4.501154] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 09:35:16.069717 [ 4.511363] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 09:35:16.081717 [ 4.517496] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 09:35:16.081772 [ 4.523791] sd 0:0:0:0: [sda] Write Protect is off Oct 3 09:35:16.093713 [ 4.527931] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 09:35:16.093787 [ 4.538193] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 09:35:16.105676 [ 4.558169] sda: sda1 sda2 < sda5 > Oct 3 09:35:16.117668 [ 4.560920] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 09:35:16.129676 [ 4.577293] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 09:35:16.141688 [ 4.593037] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Oct 3 09:35:16.165654 [ 4.614989] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 09:35:16.177683 [ 4.619459] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 09:35:16.189687 [ 4.671238] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 09:35:16.237744 [ 4.680664] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Oct 3 09:35:16.249716 [ 4.685517] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 09:35:16.249750 [ 4.691813] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 09:35:16.261724 [ 4.698655] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 09:35:16.273653 [ 4.715469] hub 3-0:1.0: USB hub found Oct 3 09:35:16.285712 [ 4.717889] hub 3-0:1.0: 1 port detected Oct 3 09:35:16.285745 [ 4.723297] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 09:35:16.297695 [ 4.731203] hub 4-0:1.0: USB hub found Oct 3 09:35:16.297729 [ 4.733869] hub 4-0:1.0: 1 port detected Oct 3 09:35:16.297754 [ 4.888135] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 09:35:16.453816 [ 4.960554] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 09:35:16.525708 [ 5.069229] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 09:35:16.645628 [ 5.177271] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 09:35:16.753630 [ 5.285356] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 09:35:16.861637 [ 5.393431] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 09:35:16.969632 [ 5.501495] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 09:35:17.077650 [ 5.609561] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 09:35:17.185642 [ 5.717611] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 09:35:17.293656 [ 5.825674] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 09:35:17.401640 [ 6.234393] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 09:35:17.809634 [ 6.342119] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 09:35:17.917645 [ 6.950454] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 09:35:18.517692 [ 7.188060] random: crng init done Oct 3 09:35:18.757654 Begin: Loading essential drivers ... done. Oct 3 09:35:19.297655 Begin: Running /scripts/init-premount ... done. Oct 3 09:35:22.313682 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 09:35:22.325615 Begin: Running /scripts/local-premount ... done. Oct 3 09:35:22.325649 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 09:35:22.385667 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 09:35:22.469638 /dev/mapper/arndale--westfield--vg-root: clean, 46656/1220608 files, 625151/4882432 blocks Oct 3 09:35:22.673754 done. Oct 3 09:35:22.685697 [ 11.125150] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 09:35:22.697598 [ 11.476054] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 09:35:23.045688 done. Oct 3 09:35:23.045716 Begin: Running /scripts/local-bottom ... done. Oct 3 09:35:23.093672 Begin: Running /scripts/init-bottom ... done. Oct 3 09:35:23.129652 INIT: version 3.06 booting Oct 3 09:35:23.573807 INIT: No inittab.d directory found Oct 3 09:35:23.657620 Using makefile-style concurrent boot in runlevel S. Oct 3 09:35:23.933845 Starting hotplug events dispatcher: systemd-udevd. Oct 3 09:35:25.577771 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 09:35:26.033730 Synthesizing the initial hotplug events (devices)...done. Oct 3 09:35:26.801744 Waiting for /dev to be fully populated...[ 15.365592] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Oct 3 09:35:26.933624 [ 15.400873] wm8994 3-001a: Device is not a WM8994, ID is 0 Oct 3 09:35:26.969704 [ 15.406313] s5p-secss 10830000.sss: s5p-sss driver registered Oct 3 09:35:26.981679 [ 15.407184] wm8994: probe of 3-001a failed with error -22 Oct 3 09:35:26.981679 [ 15.422465] mc: Linux media interface: v0.10 Oct 3 09:35:26.993659 [ 15.533764] videodev: Linux video capture interface: v2.00 Oct 3 09:35:27.101673 [ 15.718197] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 09:35:27.293633 [ 15.835635] exynos-gsc 13e00000.gsc: Adding to iommu group 0 Oct 3 09:35:27.401693 [ 15.840199] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 09:35:27.413702 [ 15.850994] exynos-gsc 13e10000.gsc: Adding to iommu group 1 Oct 3 09:35:27.425638 [ 15.856552] exynos-gsc 13e20000.gsc: Adding to iommu group 2 Oct 3 09:35:27.425660 [ 15.862118] exynos-gsc 13e30000.gsc: Adding to iommu group 3 Oct 3 09:35:27.437638 [ 15.891948] s5p-mfc 11000000.codec: Adding to iommu group 4 Oct 3 09:35:27.461670 [ 15.916259] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Oct 3 09:35:27.485667 [ 15.950018] blk_print_req_error: 6 callbacks suppressed Oct 3 09:35:27.521660 [ 15.950029] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 09:35:27.533715 [ 15.963479] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 09:35:27.533725 [ 15.972460] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 09:35:27.545674 [ 15.981066] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 09:35:27.557677 [ 15.991970] s5p-mfc 11000000.codec: decoder registered as /dev/video4 Oct 3 09:35:27.557677 [ 15.998307] s5p-mfc 11000000.codec: encoder registered as /dev/video5 Oct 3 09:35:27.569632 [ 16.063476] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 09:35:27.641618 [ 16.128103] usb3503 usb-hub: switched to HUB mode Oct 3 09:35:27.701657 [ 16.131543] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 09:35:27.701657 [ 16.171606] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 09:35:27.749618 [ 16.279734] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 09:35:27.857622 [ 16.326795] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Oct 3 09:35:27.893720 [ 16.393684] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 09:35:27.965773 [ 16.488102] usb 1-3: new high-speed USB device number 2 using exynos-ehci Oct 3 09:35:28.061621 [ 16.501789] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 09:35:28.073625 [ 16.609893] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 09:35:28.181806 [ 16.713777] hub 1-3:1.0: USB hub found Oct 3 09:35:28.277695 [ 16.716588] hub 1-3:1.0: 3 ports detected Oct 3 09:35:28.289668 [ 16.720978] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 09:35:28.289709 [ 16.788781] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 09:35:28.361705 [ 16.796424] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 09:35:28.373648 [ 16.805222] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 09:35:28.385753 [ 16.816787] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 09:35:28.385826 [ 16.824813] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 09:35:28.397754 [ 16.833547] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 09:35:28.409717 [ 17.058107] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 09:35:28.625832 [ 17.145318] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 09:35:28.721608 [ 17.210668] hub 1-3.2:1.0: USB hub found Oct 3 09:35:28.781638 [ 17.213723] hub 1-3.2:1.0: 4 ports detected Oct 3 09:35:28.781677 [ 17.253097] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 09:35:28.829624 [ 17.270608] usbcore: registered new device driver onboard-usb-hub Oct 3 09:35:28.841612 [ 17.410807] hub 1-3.2:1.0: USB hub found Oct 3 09:35:28.973709 [ 17.413755] hub 1-3.2:1.0: 4 ports detected Oct 3 09:35:28.985724 [ 17.423789] hub 1-3.2:1.0: USB hub found Oct 3 09:35:28.997691 [ 17.427498] hub 1-3.2:1.0: 4 ports detected Oct 3 09:35:28.997751 [ 17.748094] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 09:35:29.321708 [ 17.861536] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 09:35:29.429770 done. Oct 3 09:35:29.453682 [ 17.901872] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 09:35:29.477704 [ 18.280277] EXT4-fs (dm-0): re-mounted. Quota mode: disabled. Oct 3 09:35:29.852840 [ 18.589726] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 09:35:30.164847 [ 18.605119] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Oct 3 09:35:30.176887 [ 18.615003] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, ba:e8:87:b4:83:d7 Oct 3 09:35:30.188865 Checking file systems.../dev/sda1: clean, 2105/61056 files, 43347/243968 blocks Oct 3 09:35:31.428863 done. Oct 3 09:35:31.476820 Cleaning up temporary files... /tmp Oct 3 09:35:31.752990 . Oct 3 09:35:31.752990 [ 20.393675] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 09:35:31.961014 [ 20.442333] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 09:35:32.020822 [ 20.537778] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k Oct 3 09:35:32.116837 Mounting local filesystems...done. Oct 3 09:35:32.345050 Activating swapfile swap, if any...done. Oct 3 09:35:32.345117 Cleaning up temporary files.... Oct 3 09:35:32.381005 Starting Setting kernel variables: sysctl. Oct 3 09:35:32.536823 [ 22.353934] xenbr0: port 1(eth0) entered blocking state Oct 3 09:35:33.917725 [ 22.357792] xenbr0: port 1(eth0) entered disabled state Oct 3 09:35:33.929735 [ 22.363287] device eth0 entered promiscuous mode Oct 3 09:35:33.929795 [ 22.373159] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 09:35:33.941726 Configuring network interfaces...RTNETLINK answers: Operation not supported Oct 3 09:35:35.717773 Oct 3 09:35:35.717846 Waiting for xenbr0 to get ready (MAXWAIT is 2 seconds). Oct 3 09:35:35.717896 [ 24.576792] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 09:35:36.149810 [ 24.578128] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 3 09:35:36.149892 [ 24.589177] xenbr0: port 1(eth0) entered blocking state Oct 3 09:35:36.161744 [ 24.594372] xenbr0: port 1(eth0) entered forwarding state Oct 3 09:35:36.161807 [ 24.599980] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready Oct 3 09:35:36.173685 done. Oct 3 09:35:36.329686 Cleaning up temporary files.... Oct 3 09:35:36.401703 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Oct 3 09:35:36.593728 Starting nftables: none Oct 3 09:35:36.629589 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Oct 3 09:35:36.689724 failed! Oct 3 09:35:36.701704 startpar: service(s) returned failure: nftables ... failed! Oct 3 09:35:36.701767 INIT: Entering runlevel: 2 Oct 3 09:35:36.713707 Using makefile-style concurrent boot in runlevel 2. Oct 3 09:35:36.737706 Starting Apache httpd web server: apache2AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.149.64.45. Set the 'ServerName' directive globally to suppress this message Oct 3 09:35:37.520865 . Oct 3 09:35:38.580900 Starting SMP IRQ Balancer: irqbalance. Oct 3 09:35:39.012893 Starting NTP server: ntpd2024-10-03T09:35:39 ntpd[1146]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 09:35:39.072902 2024-10-03T09:35:39 ntpd[1146]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 09:35:39.084876 . Oct 3 09:35:39.084876 Starting system message bus: dbus. Oct 3 09:35:39.324938 Starting OpenBSD Secure Shell server: sshd. Oct 3 09:35:40.204947 Starting /usr/local/sbin/xenstored... Oct 3 09:35:42.253095 Setting domain 0 name, domid and JSON config... Oct 3 09:35:42.253168 Done setting up Dom0 Oct 3 09:35:42.253212 Starting xenconsoled... Oct 3 09:35:42.253312 Starting QEMU as disk backend for dom0 Oct 3 09:35:42.265010 Starting libvirt management daemon: libvirtd2024-10-03 09:35:43.742+0000: 1235: info : libvirt version: 10.9.0 Oct 3 09:35:43.236947 2024-10-03 09:35:43.742+0000: 1235: info : hostname: arndale-westfield Oct 3 09:35:43.248911 2024-10-03 09:35:43.742+0000: 1235: debug : virLogParseOutputs:1638 : outputs=1:file:/var/log/libvirt/libvirtd.log Oct 3 09:35:43.260895 2024-10-03 09:35:43.786+0000: 1235: debug : virLogParseOutput:1485 : output=1:file:/var/log/libvirt/libvirtd.log Oct 3 09:35:43.272791 . Oct 3 09:35:43.272791 Oct 3 09:35:44.392815 Debian GNU/Linux 12 arndale-westfield hvc0 Oct 3 09:35:44.392815 Oct 3 09:35:44.392815 arndale-westfield login: [ 68.923095] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 09:36:20.493777 [ 69.053979] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 09:36:20.625722 [ 70.342569] EXT4-fs (dm-2): unmounting filesystem. Oct 3 09:36:21.909725 [ 85.746351] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 09:36:37.312859 [ 85.877018] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 09:36:37.444864 [ 88.536161] xenbr0: port 2(vif1.0) entered blocking state Oct 3 09:36:40.109031 [ 88.540229] xenbr0: port 2(vif1.0) entered disabled state Oct 3 09:36:40.109113 [ 88.545840] device vif1.0 entered promiscuous mode Oct 3 09:36:40.120946 (XEN) d1v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 09:36:44.176832 (XEN) d1v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 09:36:44.284833 (XEN) d1v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 09:36:44.336817 (XEN) common/grant_table.c:1909:d1v1 Expanding d1 grant table from 1 to 2 frames Oct 3 09:36:47.153045 (XEN) common/grant_table.c:1909:d1v1 Expanding d1 grant table from 2 to 3 frames Oct 3 09:36:47.164963 [ 95.652030] vif vif-1-0 vif1.0: Guest Rx ready Oct 3 09:36:47.225022 [ 95.655221] IPv6: ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready Oct 3 09:36:47.225099 [ 95.661782] xenbr0: port 2(vif1.0) entered blocking state Oct 3 09:36:47.236965 [ 95.667102] xenbr0: port 2(vif1.0) entered forwarding state Oct 3 09:36:47.236965 (XEN) gnttab_mark_dirty not implemented yet Oct 3 09:36:47.261033 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 09:37:23.432846 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 09:44:04.817744 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 09:50:46.237713 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 09:57:27.681799 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 10:04:09.057792 [ 1899.548184] xenbr0: port 2(vif1.0) entered disabled state Oct 3 10:06:51.105730 [ 1920.528386] xenbr0: port 2(vif1.0) entered disabled state Oct 3 10:07:12.085774 [ 1920.532875] device vif1.0 left promiscuous mode Oct 3 10:07:12.085846 [ 1920.537026] xenbr0: port 2(vif1.0) entered disabled state Oct 3 10:07:12.085896 [ 1924.101200] EXT4-fs (dm-2): unmounting filesystem. Oct 3 10:07:15.649788 [ 1937.002757] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 10:07:28.561630 [ 1937.132993] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 10:07:28.693569 [ 1938.597889] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 10:07:30.157666 [ 1938.619135] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 10:07:30.169656 [ 1949.415118] xenbr0: port 2(vif2.0) entered blocking state Oct 3 10:07:40.968794 [ 1949.419206] xenbr0: port 2(vif2.0) entered disabled state Oct 3 10:07:40.968794 [ 1949.424785] device vif2.0 entered promiscuous mode Oct 3 10:07:40.980766 (XEN) d2v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 10:07:45.185732 (XEN) d2v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 10:07:45.293993 (XEN) d2v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 10:07:45.341767 (XEN) common/grant_table.c:1909:d2v0 Expanding d2 grant table from 1 to 2 frames Oct 3 10:07:48.321669 (XEN) common/grant_table.c:1909:d2v0 Expanding d2 grant table from 2 to 3 frames Oct 3 10:07:48.333622 [ 1956.849285] vif vif-2-0 vif2.0: Guest Rx ready Oct 3 10:07:48.405679 [ 1956.852483] IPv6: ADDRCONF(NETDEV_CHANGE): vif2.0: link becomes ready Oct 3 10:07:48.405716 [ 1956.859249] xenbr0: port 2(vif2.0) entered blocking state Oct 3 10:07:48.417628 [ 1956.864492] xenbr0: port 2(vif2.0) entered forwarding state Oct 3 10:07:48.417662 [ 1996.681722] xenbr0: port 2(vif2.0) entered disabled state Oct 3 10:08:28.236972 [ 1996.869137] xenbr0: port 2(vif2.0) entered disabled state Oct 3 10:08:28.420877 [ 1996.873661] device vif2.0 left promiscuous mode Oct 3 10:08:28.420877 [ 1996.877809] xenbr0: port 2(vif2.0) entered disabled state Oct 3 10:08:28.432821 [ 2050.663875] EXT4-fs (dm-2): unmounting filesystem. Oct 3 10:09:22.213642 [ 2051.941099] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 10:09:23.497722 [ 2052.071876] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 10:09:23.629583 [ 2053.314676] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 10:09:24.877762 [ 2053.335866] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 10:09:24.889708 [ 2061.475532] xenbr0: port 2(vif3.0) entered blocking state Oct 3 10:09:33.025824 [ 2061.479634] xenbr0: port 2(vif3.0) entered disabled state Oct 3 10:09:33.037703 [ 2061.485219] device vif3.0 entered promiscuous mode Oct 3 10:09:33.037766 (XEN) d3v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 10:09:37.253758 (XEN) d3v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 10:09:37.364825 (XEN) d3v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 10:09:37.400859 (XEN) common/grant_table.c:1909:d3v0 Expanding d3 grant table from 1 to 2 frames Oct 3 10:09:40.537784 (XEN) common/grant_table.c:1909:d3v0 Expanding d3 grant table from 2 to 3 frames Oct 3 10:09:40.537876 [ 2069.021154] vif vif-3-0 vif3.0: Guest Rx ready Oct 3 10:09:40.573770 [ 2069.024560] IPv6: ADDRCONF(NETDEV_CHANGE): vif3.0: link becomes ready Oct 3 10:09:40.573837 [ 2069.030935] xenbr0: port 2(vif3.0) entered blocking state Oct 3 10:09:40.585732 [ 2069.036633] xenbr0: port 2(vif3.0) entered forwarding state Oct 3 10:09:40.585796 [ 2103.186725] xenbr0: port 2(vif3.0) entered disabled state Oct 3 10:10:14.737628 [ 2103.358577] xenbr0: port 2(vif3.0) entered disabled state Oct 3 10:10:14.905656 [ 2103.364937] device vif3.0 left promiscuous mode Oct 3 10:10:14.905693 [ 2103.368152] xenbr0: port 2(vif3.0) entered disabled state Oct 3 10:10:14.917648 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 10:10:49.628827 [ 2155.758433] EXT4-fs (dm-2): unmounting filesystem. Oct 3 10:11:07.305821 [ 2157.024078] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 10:11:08.577719 [ 2157.154687] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 10:11:08.709623 [ 2158.360009] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 10:11:09.921626 [ 2158.385295] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 10:11:09.933615 [ 2166.072022] xenbr0: port 2(vif4.0) entered blocking state Oct 3 10:11:17.621722 [ 2166.076083] xenbr0: port 2(vif4.0) entered disabled state Oct 3 10:11:17.633693 [ 2166.081725] device vif4.0 entered promiscuous mode Oct 3 10:11:17.633753 (XEN) d4v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 10:11:21.845747 (XEN) d4v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 10:11:21.953788 (XEN) d4v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 10:11:22.001666 (XEN) common/grant_table.c:1909:d4v0 Expanding d4 grant table from 1 to 2 frames Oct 3 10:11:25.061837 (XEN) common/grant_table.c:1909:d4v0 Expanding d4 grant table from 2 to 3 frames Oct 3 10:11:25.062012 [ 2173.565375] vif vif-4-0 vif4.0: Guest Rx ready Oct 3 10:11:25.109850 [ 2173.568670] IPv6: ADDRCONF(NETDEV_CHANGE): vif4.0: link becomes ready Oct 3 10:11:25.121852 [ 2173.575121] xenbr0: port 2(vif4.0) entered blocking state Oct 3 10:11:25.121940 [ 2173.580518] xenbr0: port 2(vif4.0) entered forwarding state Oct 3 10:11:25.133685 [ 2207.446973] xenbr0: port 2(vif4.0) entered disabled state Oct 3 10:11:58.993774 [ 2207.659048] xenbr0: port 2(vif4.0) entered disabled state Oct 3 10:11:59.209832 [ 2207.663543] device vif4.0 left promiscuous mode Oct 3 10:11:59.209956 [ 2207.667694] xenbr0: port 2(vif4.0) entered disabled state Oct 3 10:11:59.210016 [ 2261.147969] EXT4-fs (dm-2): unmounting filesystem. Oct 3 10:12:52.701674 [ 2262.440215] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 10:12:53.985793 [ 2262.570862] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 10:12:54.117752 [ 2272.239619] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 10:13:03.797698 [ 2272.269350] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 10:13:03.821626 [ 2280.036878] xenbr0: port 2(vif5.0) entered blocking state Oct 3 10:13:11.589006 [ 2280.040943] xenbr0: port 2(vif5.0) entered disabled state Oct 3 10:13:11.589077 [ 2280.046548] device vif5.0 entered promiscuous mode Oct 3 10:13:11.600869 (XEN) d5v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 10:13:15.800991 (XEN) d5v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 10:13:15.920973 (XEN) d5v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 10:13:15.956962 (XEN) common/grant_table.c:1909:d5v0 Expanding d5 grant table from 1 to 2 frames Oct 3 10:13:18.972827 (XEN) common/grant_table.c:1909:d5v0 Expanding d5 grant table from 2 to 3 frames Oct 3 10:13:18.984812 [ 2287.483913] vif vif-5-0 vif5.0: Guest Rx ready Oct 3 10:13:19.033062 [ 2287.487129] IPv6: ADDRCONF(NETDEV_CHANGE): vif5.0: link becomes ready Oct 3 10:13:19.033136 [ 2287.493959] xenbr0: port 2(vif5.0) entered blocking state Oct 3 10:13:19.045055 [ 2287.499048] xenbr0: port 2(vif5.0) entered forwarding state Oct 3 10:13:19.045118 [ 2321.852964] xenbr0: port 2(vif5.0) entered disabled state Oct 3 10:13:53.396673 [ 2322.018528] xenbr0: port 2(vif5.0) entered disabled state Oct 3 10:13:53.564643 [ 2322.022946] device vif5.0 left promiscuous mode Oct 3 10:13:53.576681 [ 2322.027182] xenbr0: port 2(vif5.0) entered disabled state Oct 3 10:13:53.576718 [ 2375.111369] EXT4-fs (dm-2): unmounting filesystem. Oct 3 10:14:46.657837 [ 2376.367934] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 10:14:47.917836 [ 2376.498573] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 10:14:48.049786 [ 2377.707464] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 10:14:49.265619 [ 2377.729146] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 10:14:49.277616 [ 2385.411770] xenbr0: port 2(vif6.0) entered blocking state Oct 3 10:14:56.961661 [ 2385.415807] xenbr0: port 2(vif6.0) entered disabled state Oct 3 10:14:56.961661 [ 2385.421476] device vif6.0 entered promiscuous mode Oct 3 10:14:56.973593 (XEN) d6v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 10:15:01.184828 (XEN) d6v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 10:15:01.304818 (XEN) d6v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 10:15:01.345024 (XEN) common/grant_table.c:1909:d6v0 Expanding d6 grant table from 1 to 2 frames Oct 3 10:15:04.369763 (XEN) common/grant_table.c:1909:d6v1 Expanding d6 grant table from 2 to 3 frames Oct 3 10:15:04.381713 [ 2392.889129] vif vif-6-0 vif6.0: Guest Rx ready Oct 3 10:15:04.441796 [ 2392.892287] IPv6: ADDRCONF(NETDEV_CHANGE): vif6.0: link becomes ready Oct 3 10:15:04.441863 [ 2392.898908] xenbr0: port 2(vif6.0) entered blocking state Oct 3 10:15:04.453785 [ 2392.904372] xenbr0: port 2(vif6.0) entered forwarding state Oct 3 10:15:04.453850 [ 2427.024042] xenbr0: port 2(vif6.0) entered disabled state Oct 3 10:15:38.569026 [ 2427.208561] xenbr0: port 2(vif6.0) entered disabled state Oct 3 10:15:38.760859 [ 2427.213101] device vif6.0 left promiscuous mode Oct 3 10:15:38.760859 [ 2427.217226] xenbr0: port 2(vif6.0) entered disabled state Oct 3 10:15:38.760859 [ 2480.267965] EXT4-fs (dm-2): unmounting filesystem. Oct 3 10:16:31.809564 [ 2481.572967] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 10:16:33.125660 [ 2481.703632] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 10:16:33.257647 [ 2482.927386] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 10:16:34.481749 [ 2482.945381] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 10:16:34.493706 [ 2491.730369] xenbr0: port 2(vif7.0) entered blocking state Oct 3 10:16:43.273743 [ 2491.734402] xenbr0: port 2(vif7.0) entered disabled state Oct 3 10:16:43.285756 [ 2491.740091] device vif7.0 entered promiscuous mode Oct 3 10:16:43.285825 (XEN) d7v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 10:16:47.485621 (XEN) d7v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 10:16:47.605603 (XEN) d7v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 10:16:47.641595 (XEN) common/grant_table.c:1909:d7v0 Expanding d7 grant table from 1 to 2 frames Oct 3 10:16:50.641647 (XEN) common/grant_table.c:1909:d7v0 Expanding d7 grant table from 2 to 3 frames Oct 3 10:16:50.653626 [ 2499.178412] vif vif-7-0 vif7.0: Guest Rx ready Oct 3 10:16:50.725678 [ 2499.182214] IPv6: ADDRCONF(NETDEV_CHANGE): vif7.0: link becomes ready Oct 3 10:16:50.725678 [ 2499.188209] xenbr0: port 2(vif7.0) entered blocking state Oct 3 10:16:50.737727 [ 2499.193464] xenbr0: port 2(vif7.0) entered forwarding state Oct 3 10:16:50.737727 [ 2534.296110] xenbr0: port 2(vif7.0) entered disabled state Oct 3 10:17:25.837784 [ 2534.478718] xenbr0: port 2(vif7.0) entered disabled state Oct 3 10:17:26.017767 [ 2534.483144] device vif7.0 left promiscuous mode Oct 3 10:17:26.029762 [ 2534.487415] xenbr0: port 2(vif7.0) entered disabled state Oct 3 10:17:26.029824 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 10:17:30.853763 [ 2588.103362] EXT4-fs (dm-2): unmounting filesystem. Oct 3 10:18:19.645784 [ 2589.466992] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 10:18:21.013836 [ 2589.597645] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 10:18:21.145646 [ 2591.137298] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 10:18:22.696816 [ 2591.228380] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 10:18:22.768892 [ 2598.944602] xenbr0: port 2(vif8.0) entered blocking state Oct 3 10:18:30.488843 [ 2598.948712] xenbr0: port 2(vif8.0) entered disabled state Oct 3 10:18:30.500757 [ 2598.954265] device vif8.0 entered promiscuous mode Oct 3 10:18:30.500757 (XEN) d8v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 10:18:34.728724 (XEN) d8v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 10:18:34.836827 (XEN) d8v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 10:18:34.872806 (XEN) common/grant_table.c:1909:d8v0 Expanding d8 grant table from 1 to 2 frames Oct 3 10:18:37.972871 (XEN) common/grant_table.c:1909:d8v0 Expanding d8 grant table from 2 to 3 frames Oct 3 10:18:37.984813 [ 2606.469108] vif vif-8-0 vif8.0: Guest Rx ready Oct 3 10:18:38.008807 [ 2606.472299] IPv6: ADDRCONF(NETDEV_CHANGE): vif8.0: link becomes ready Oct 3 10:18:38.020827 [ 2606.483632] xenbr0: port 2(vif8.0) entered blocking state Oct 3 10:18:38.032886 [ 2606.488514] xenbr0: port 2(vif8.0) entered forwarding state Oct 3 10:18:38.032886 [ 2641.668349] xenbr0: port 2(vif8.0) entered disabled state Oct 3 10:19:13.213847 [ 2641.848591] xenbr0: port 2(vif8.0) entered disabled state Oct 3 10:19:13.393666 [ 2641.853040] device vif8.0 left promiscuous mode Oct 3 10:19:13.393760 [ 2641.857270] xenbr0: port 2(vif8.0) entered disabled state Oct 3 10:19:13.405606 [ 2694.858353] EXT4-fs (dm-2): unmounting filesystem. Oct 3 10:20:06.405761 [ 2696.138863] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 10:20:07.689755 [ 2696.269477] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 10:20:07.821590 [ 2697.497353] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 10:20:09.045785 [ 2697.525576] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 10:20:09.069712 [ 2705.243756] xenbr0: port 2(vif9.0) entered blocking state Oct 3 10:20:16.789778 [ 2705.247791] xenbr0: port 2(vif9.0) entered disabled state Oct 3 10:20:16.789851 [ 2705.253486] device vif9.0 entered promiscuous mode Oct 3 10:20:16.801700 (XEN) d9v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 10:20:21.001721 (XEN) d9v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 10:20:21.109753 (XEN) d9v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 10:20:21.160724 (XEN) common/grant_table.c:1909:d9v1 Expanding d9 grant table from 1 to 2 frames Oct 3 10:20:24.216852 (XEN) common/grant_table.c:1909:d9v1 Expanding d9 grant table from 2 to 3 frames Oct 3 10:20:24.228819 [ 2712.740789] vif vif-9-0 vif9.0: Guest Rx ready Oct 3 10:20:24.288894 [ 2712.744232] IPv6: ADDRCONF(NETDEV_CHANGE): vif9.0: link becomes ready Oct 3 10:20:24.288894 [ 2712.750587] xenbr0: port 2(vif9.0) entered blocking state Oct 3 10:20:24.300856 [ 2712.756040] xenbr0: port 2(vif9.0) entered forwarding state Oct 3 10:20:24.313026 [ 2743.050660] xenbr0: port 2(vif9.0) entered disabled state Oct 3 10:20:54.600848 [ 2743.218825] xenbr0: port 2(vif9.0) entered disabled state Oct 3 10:20:54.768729 [ 2743.223284] device vif9.0 left promiscuous mode Oct 3 10:20:54.768927 [ 2743.227476] xenbr0: port 2(vif9.0) entered disabled state Oct 3 10:20:54.768927 [ 2795.468348] EXT4-fs (dm-2): unmounting filesystem. Oct 3 10:21:47.012838 [ 2796.721484] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 10:21:48.269749 [ 2796.852085] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 10:21:48.401678 [ 2798.077238] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 10:21:49.629674 [ 2798.105037] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 10:21:49.641671 [ 2805.746743] xenbr0: port 2(vif10.0) entered blocking state Oct 3 10:21:57.285741 [ 2805.750899] xenbr0: port 2(vif10.0) entered disabled state Oct 3 10:21:57.297700 [ 2805.756582] device vif10.0 entered promiscuous mode Oct 3 10:21:57.297734 (XEN) d10v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 10:22:01.521638 (XEN) d10v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 10:22:01.629698 (XEN) d10v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 10:22:01.665612 (XEN) common/grant_table.c:1909:d10v0 Expanding d10 grant table from 1 to 2 frames Oct 3 10:22:04.737789 (XEN) common/grant_table.c:1909:d10v0 Expanding d10 grant table from 2 to 3 frames Oct 3 10:22:04.749773 [ 2813.249761] vif vif-10-0 vif10.0: Guest Rx ready Oct 3 10:22:04.797840 [ 2813.253473] IPv6: ADDRCONF(NETDEV_CHANGE): vif10.0: link becomes ready Oct 3 10:22:04.797913 [ 2813.259893] xenbr0: port 2(vif10.0) entered blocking state Oct 3 10:22:04.809687 [ 2813.265579] xenbr0: port 2(vif10.0) entered forwarding state Oct 3 10:22:04.809744 [ 2848.300352] xenbr0: port 2(vif10.0) entered disabled state Oct 3 10:22:39.845598 [ 2848.468935] xenbr0: port 2(vif10.0) entered disabled state Oct 3 10:22:40.013758 [ 2848.473460] device vif10.0 left promiscuous mode Oct 3 10:22:40.013848 [ 2848.477766] xenbr0: port 2(vif10.0) entered disabled state Oct 3 10:22:40.025693 [ 2906.148783] EXT4-fs (dm-2): unmounting filesystem. Oct 3 10:23:37.697614 [ 2907.404592] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 10:23:38.944839 [ 2907.535160] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 10:23:39.076854 [ 2908.754355] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 10:23:40.309756 [ 2908.778249] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 10:23:40.321706 [ 2916.444511] xenbr0: port 2(vif11.0) entered blocking state Oct 3 10:23:47.985771 [ 2916.448677] xenbr0: port 2(vif11.0) entered disabled state Oct 3 10:23:47.997713 [ 2916.454368] device vif11.0 entered promiscuous mode Oct 3 10:23:47.997775 (XEN) d11v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 10:23:52.213691 (XEN) d11v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 10:23:52.321712 (XEN) d11v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 10:23:52.361757 (XEN) common/grant_table.c:1909:d11v1 Expanding d11 grant table from 1 to 2 frames Oct 3 10:23:55.425733 (XEN) common/grant_table.c:1909:d11v0 Expanding d11 grant table from 2 to 3 frames Oct 3 10:23:55.449683 [ 2923.959463] vif vif-11-0 vif11.0: Guest Rx ready Oct 3 10:23:55.497700 [ 2923.963136] IPv6: ADDRCONF(NETDEV_CHANGE): vif11.0: link becomes ready Oct 3 10:23:55.509729 [ 2923.969852] xenbr0: port 2(vif11.0) entered blocking state Oct 3 10:23:55.509788 [ 2923.975620] xenbr0: port 2(vif11.0) entered forwarding state Oct 3 10:23:55.521664 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 10:24:12.205661 [ 2959.072245] xenbr0: port 2(vif11.0) entered disabled state Oct 3 10:24:30.617784 [ 2959.258906] xenbr0: port 2(vif11.0) entered disabled state Oct 3 10:24:30.797841 [ 2959.264700] device vif11.0 left promiscuous mode Oct 3 10:24:30.809783 [ 2959.267963] xenbr0: port 2(vif11.0) entered disabled state Oct 3 10:24:30.809848 [ 3012.278182] EXT4-fs (dm-2): unmounting filesystem. Oct 3 10:25:23.817768 [ 3013.554140] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 10:25:25.101846 [ 3013.684630] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 10:25:25.233867 [ 3014.906807] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 10:25:26.461663 [ 3014.926403] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 10:25:26.473681 [ 3022.611940] xenbr0: port 2(vif12.0) entered blocking state Oct 3 10:25:34.153731 [ 3022.616063] xenbr0: port 2(vif12.0) entered disabled state Oct 3 10:25:34.165700 [ 3022.621820] device vif12.0 entered promiscuous mode Oct 3 10:25:34.165700 (XEN) d12v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 10:25:38.373736 (XEN) d12v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 10:25:38.481746 (XEN) d12v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 10:25:38.529731 (XEN) common/grant_table.c:1909:d12v0 Expanding d12 grant table from 1 to 2 frames Oct 3 10:25:41.576911 (XEN) common/grant_table.c:1909:d12v0 Expanding d12 grant table from 2 to 3 frames Oct 3 10:25:41.588857 [ 3030.074617] vif vif-12-0 vif12.0: Guest Rx ready Oct 3 10:25:41.613020 [ 3030.078097] IPv6: ADDRCONF(NETDEV_CHANGE): vif12.0: link becomes ready Oct 3 10:25:41.625051 [ 3030.084621] xenbr0: port 2(vif12.0) entered blocking state Oct 3 10:25:41.625114 [ 3030.090077] xenbr0: port 2(vif12.0) entered forwarding state Oct 3 10:25:41.637021 [ 3060.654918] xenbr0: port 2(vif12.0) entered disabled state Oct 3 10:26:12.193852 [ 3060.848625] xenbr0: port 2(vif12.0) entered disabled state Oct 3 10:26:12.385792 [ 3060.853110] device vif12.0 left promiscuous mode Oct 3 10:26:12.397798 [ 3060.857440] xenbr0: port 2(vif12.0) entered disabled state Oct 3 10:26:12.397895 [ 3114.579655] EXT4-fs (dm-2): unmounting filesystem. Oct 3 10:27:06.120848 [ 3115.837165] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 10:27:07.384872 [ 3115.967289] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 10:27:07.516861 [ 3117.228467] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 10:27:08.780859 [ 3117.553597] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 10:27:09.096848 [ 3125.147746] xenbr0: port 2(vif13.0) entered blocking state Oct 3 10:27:16.689817 [ 3125.151930] xenbr0: port 2(vif13.0) entered disabled state Oct 3 10:27:16.690474 [ 3125.157586] device vif13.0 entered promiscuous mode Oct 3 10:27:16.701693 (XEN) d13v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 10:27:20.913749 (XEN) d13v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 10:27:21.021718 (XEN) d13v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 10:27:21.069696 (XEN) common/grant_table.c:1909:d13v0 Expanding d13 grant table from 1 to 2 frames Oct 3 10:27:24.097824 (XEN) common/grant_table.c:1909:d13v0 Expanding d13 grant table from 2 to 3 frames Oct 3 10:27:24.109706 [ 3132.625478] vif vif-13-0 vif13.0: Guest Rx ready Oct 3 10:27:24.169741 [ 3132.628862] IPv6: ADDRCONF(NETDEV_CHANGE): vif13.0: link becomes ready Oct 3 10:27:24.169809 [ 3132.636081] xenbr0: port 2(vif13.0) entered blocking state Oct 3 10:27:24.181716 [ 3132.640920] xenbr0: port 2(vif13.0) entered forwarding state Oct 3 10:27:24.193680 [ 3164.492940] xenbr0: port 2(vif13.0) entered disabled state Oct 3 10:27:56.037734 [ 3164.608476] xenbr0: port 2(vif13.0) entered disabled state Oct 3 10:27:56.148873 [ 3164.612946] device vif13.0 left promiscuous mode Oct 3 10:27:56.160857 [ 3164.617291] xenbr0: port 2(vif13.0) entered disabled state Oct 3 10:27:56.160857 [ 3167.623325] EXT4-fs (dm-2): unmounting filesystem. Oct 3 10:27:59.165101 Oct 3 10:28:17.998194 (XEN) *** Serial input to Xen (type 'CTRL-x' three times to switch input) Oct 3 10:28:18.013707 Oct 3 10:28:18.014433 Oct 3 10:28:18.993041 (XEN) '0' pressed -> dumping Dom0's registers Oct 3 10:28:19.021765 (XEN) *** Dumping Dom0 vcpu#0 state: *** Oct 3 10:28:19.021798 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Oct 3 10:28:19.023065 Not tainted ]---- Oct 3 10:28:19.033685 (XEN) CPU: 0 Oct 3 10:28:19.033713 (XEN) PC: c031ce28 Oct 3 10:28:19.033737 (XEN) CPSR: 600f0093 MODE:32-bit Guest SVC Oct 3 10:28:19.033762 (XEN) R0: 00000005 R1: 00000000 R2: 009e7641 R3: c031ce20 Oct 3 10:28:19.045723 (XEN) R4: c1909d80 R5: c1b12200 R6: c1904d1c R7: c1904d78 Oct 3 10:28:19.045757 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c00 Oct 3 10:28:19.061020 (XEN) USR: SP: beedb970 LR: b6e546c5 Oct 3 10:28:19.061128 (XEN) SVC: SP: c1901f40 LR: c0308df0 SPSR:600f0013 Oct 3 10:28:19.061190 (XEN) ABT: SP: c1b22b10 LR: c0300ea0 SPSR:600f0193 Oct 3 10:28:19.073028 (XEN) UND: SP: c1b22b20 LR: c0300fa0 SPSR:60030093 Oct 3 10:28:19.073090 (XEN) IRQ: SP: c1b22b00 LR: c0300ba0 SPSR:600f0193 Oct 3 10:28:19.084845 (XEN) FIQ: SP: c1b22b30 LR: c1b22b30 SPSR:00000000 Oct 3 10:28:19.084845 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 10:28:19.084845 (XEN) Oct 3 10:28:19.096877 (XEN) SCTLR: 10c5387d Oct 3 10:28:19.096877 (XEN) TCR: 00000000 Oct 3 10:28:19.096877 (XEN) TTBR0: 000000006692406a Oct 3 10:28:19.096877 (XEN) TTBR1: 000000006020406a Oct 3 10:28:19.096877 (XEN) IFAR: b6de8814, IFSR: 00000007 Oct 3 10:28:19.108978 (XEN) DFAR: 00567318, DFSR: 0000081f Oct 3 10:28:19.109055 (XEN) Oct 3 10:28:19.109098 (XEN) VTCR_EL2: 80003558 Oct 3 10:28:19.109178 (XEN) VTTBR_EL2: 00010000bef8a000 Oct 3 10:28:19.120881 (XEN) Oct 3 10:28:19.120881 (XEN) SCTLR_EL2: 30cd187f Oct 3 10:28:19.120881 (XEN) HCR_EL2: 007c663f Oct 3 10:28:19.120881 (XEN) TTBR0_EL2: 000000004111d000 Oct 3 10:28:19.120881 (XEN) Oct 3 10:28:19.120881 (XEN) ESR_EL2: 07e00000 Oct 3 10:28:19.132862 (XEN) HPFAR_EL2: 00104810 Oct 3 10:28:19.132862 (XEN) HDFAR: e0807f00 Oct 3 10:28:19.132969 (XEN) HIFAR: c060f4b8 Oct 3 10:28:19.132978 (XEN) Oct 3 10:28:19.133015 (XEN) Guest stack trace from sp=c1901f40: Oct 3 10:28:19.144879 (XEN) Failed to convert stack to physical address Oct 3 10:28:19.144879 (XEN) *** Dumping Dom0 vcpu#1 state: *** Oct 3 10:28:19.144879 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 10:28:19.156873 (XEN) CPU: 0 Oct 3 10:28:19.156873 (XEN) PC: c031ce28 Oct 3 10:28:19.156873 (XEN) CPSR: 60030093 MODE:32-bit Guest SVC Oct 3 10:28:19.156873 (XEN) R0: 00000005 R1: 00000000 R2: 00747179 R3: c031ce20 Oct 3 10:28:19.168880 (XEN) R4: c210e600 R5: c1b12200 R6: c1904d1c R7: c1904d78 Oct 3 10:28:19.168880 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c00 Oct 3 10:28:19.180644 (XEN) USR: SP: be8d1948 LR: b6b4e893 Oct 3 10:28:19.180707 (XEN) SVC: SP: e08c9f90 LR: c0308df0 SPSR:00030030 Oct 3 10:28:19.192890 (XEN) ABT: SP: c1b22b50 LR: c0300ea0 SPSR:60070193 Oct 3 10:28:19.192890 (XEN) UND: SP: c1b22b60 LR: c0300fa0 SPSR:60030093 Oct 3 10:28:19.192890 (XEN) IRQ: SP: c1b22b40 LR: c0300ba0 SPSR:60080193 Oct 3 10:28:19.204887 (XEN) FIQ: SP: c1b22b70 LR: c1b22b70 SPSR:00000000 Oct 3 10:28:19.204887 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 10:28:19.216875 (XEN) Oct 3 10:28:19.216875 (XEN) SCTLR: 10c5387d Oct 3 10:28:19.216875 (XEN) TCR: 00000000 Oct 3 10:28:19.216875 (XEN) TTBR0: 000000006442406a Oct 3 10:28:19.216875 (XEN) TTBR1: 000000006020406a Oct 3 10:28:19.228973 (XEN) IFAR: b6f3a02c, IFSR: 00000007 Oct 3 10:28:19.229037 (XEN) DFAR: b6c2f000, DFSR: 0000081f Oct 3 10:28:19.229083 (XEN) Oct 3 10:28:19.229121 (XEN) VTCR_EL2: 80003558 Oct 3 10:28:19.229163 (XEN) VTTBR_EL2: 00010000bef8a000 Oct 3 10:28:19.240836 (XEN) Oct 3 10:28:19.240836 (XEN) SCTLR_EL2: 30cd187f Oct 3 10:28:19.240836 (XEN) HCR_EL2: 007c663f Oct 3 10:28:19.240836 (XEN) TTBR0_EL2: 000000004111d000 Oct 3 10:28:19.240836 (XEN) Oct 3 10:28:19.240836 (XEN) ESR_EL2: 07e00000 Oct 3 10:28:19.252876 (XEN) HPFAR_EL2: 00104810 Oct 3 10:28:19.252876 (XEN) HDFAR: e0807f00 Oct 3 10:28:19.252876 (XEN) HIFAR: c060f4b8 Oct 3 10:28:19.252876 (XEN) Oct 3 10:28:19.252876 (XEN) Guest stack trace from sp=e08c9f90: Oct 3 10:28:19.264824 (XEN) Failed to convert stack to physical address Oct 3 10:28:19.264824 Oct 3 10:28:21.035076 (XEN) 'H' pressed -> dumping heap info (now = 3194802703166) Oct 3 10:28:21.052935 (XEN) heap[node=0][zone=0] -> 16279 pages Oct 3 10:28:21.052968 (XEN) heap[node=0][zone=1] -> 0 pages Oct 3 10:28:21.052968 Oct 3 10:28:21.055289 (XEN) heap[node=0][zone=2] -> 0 pages Oct 3 10:28:21.064956 (XEN) heap[node=0][zone=3] -> 0 pages Oct 3 10:28:21.064956 (XEN) heap[node=0][zone=4] -> 0 pages Oct 3 10:28:21.064956 (XEN) heap[node=0][zone=5] -> 0 pages Oct 3 10:28:21.076793 (XEN) heap[node=0][zone=6] -> 0 pages Oct 3 10:28:21.076793 (XEN) heap[node=0][zone=7] -> 0 pages Oct 3 10:28:21.076793 (XEN) heap[node=0][zone=8] -> 0 pages Oct 3 10:28:21.076793 (XEN) heap[node=0][zone=9] -> 0 pages Oct 3 10:28:21.088852 (XEN) heap[node=0][zone=10] -> 0 pages Oct 3 10:28:21.088852 (XEN) heap[node=0][zone=11] -> 0 pages Oct 3 10:28:21.088852 (XEN) heap[node=0][zone=12] -> 0 pages Oct 3 10:28:21.100893 (XEN) heap[node=0][zone=13] -> 0 pages Oct 3 10:28:21.100929 (XEN) heap[node=0][zone=14] -> 0 pages Oct 3 10:28:21.100954 (XEN) heap[node=0][zone=15] -> 0 pages Oct 3 10:28:21.100954 (XEN) heap[node=0][zone=16] -> 0 pages Oct 3 10:28:21.112861 (XEN) heap[node=0][zone=17] -> 0 pages Oct 3 10:28:21.112861 (XEN) heap[node=0][zone=18] -> 0 pages Oct 3 10:28:21.112861 (XEN) heap[node=0][zone=19] -> 130813 pages Oct 3 10:28:21.124890 (XEN) heap[node=0][zone=20] -> 241601 pages Oct 3 10:28:21.124890 (XEN) heap[node=0][zone=21] -> 0 pages Oct 3 10:28:21.124890 (XEN) heap[node=0][zone=22] -> 0 pages Oct 3 10:28:21.136967 (XEN) heap[node=0][zone=23] -> 0 pages Oct 3 10:28:21.137030 (XEN) heap[node=0][zone=24] -> 0 pages Oct 3 10:28:21.137075 (XEN) heap[node=0][zone=25] -> 0 pages Oct 3 10:28:21.137119 (XEN) heap[node=0][zone=26] -> 0 pages Oct 3 10:28:21.148860 (XEN) heap[node=0][zone=27] -> 0 pages Oct 3 10:28:21.148860 (XEN) heap[node=0][zone=28] -> 0 pages Oct 3 10:28:21.148860 Oct 3 10:28:23.050425 Oct 3 10:28:24.811982 Oct 3 10:28:25.023644 Oct 3 10:28:26.818044 Oct 3 10:28:27.029411 (XEN) Dumping timer queues: Oct 3 10:28:27.048859 (XEN) CPU00: Oct 3 10:28:27.048884 (XEN) ex= 386707us timer=43fdc968 cb=arch/arm/vtimer.c#virt_timer_expired(43fdc960) Oct 3 10:28:27.048884 ( Oct 3 10:28:27.051021 XEN) CPU01: Oct 3 10:28:27.060805 (XEN) ex= 21229us timer=43fee968 cb=arch/arm/vtimer.c#virt_timer_expired(43fee960) Oct 3 10:28:27.060805 Oct 3 10:28:29.042582 Oct 3 10:28:30.843186 Oct 3 10:28:31.190723 (XEN) 'd' pressed -> dumping registers Oct 3 10:28:31.213064 (XEN) Oct 3 10:28:31.213118 (XEN) *** Dumping CPU0 host state: *** Oct 3 10:28:31.213165 (XEN) ----[ Xen-4.20-unstable arm32 debug=y N Oct 3 10:28:31.214453 ot tainted ]---- Oct 3 10:28:31.224945 (XEN) CPU: 0 Oct 3 10:28:31.224998 (XEN) PC: 00269e8c arch/arm/domain.c#idle_loop+0x134/0x1b0 Oct 3 10:28:31.225049 (XEN) CPSR: 6003005a MODE:Hypervisor Oct 3 10:28:31.236975 (XEN) R0: 00000000 R1: 00000001 R2: 00000000 R3: 00000000 Oct 3 10:28:31.237010 (XEN) R4: 00000000 R5: 00310108 R6: 0034333c R7: 00000001 Oct 3 10:28:31.237037 (XEN) R8: 00340108 R9: 00000000 R10:40e00000 R11:4003ff54 R12:fffffffc Oct 3 10:28:31.249008 (XEN) HYP: SP: 4003ff44 LR: 0022c2d0 Oct 3 10:28:31.249068 (XEN) Oct 3 10:28:31.249109 (XEN) VTCR_EL2: 80003558 Oct 3 10:28:31.261024 (XEN) VTTBR_EL2: 00010000bef8a000 Oct 3 10:28:31.261075 (XEN) Oct 3 10:28:31.261075 (XEN) SCTLR_EL2: 30cd187f Oct 3 10:28:31.261075 (XEN) HCR_EL2: 007c663f Oct 3 10:28:31.261075 (XEN) TTBR0_EL2: 000000004111d000 Oct 3 10:28:31.261075 (XEN) Oct 3 10:28:31.272911 (XEN) ESR_EL2: 07e00000 Oct 3 10:28:31.273001 (XEN) HPFAR_EL2: 00104810 Oct 3 10:28:31.273001 (XEN) HDFAR: e0807f00 Oct 3 10:28:31.273065 (XEN) HIFAR: c060f4b8 Oct 3 10:28:31.273065 (XEN) Oct 3 10:28:31.273114 (XEN) Xen stack trace from sp=4003ff44: Oct 3 10:28:31.284876 (XEN) 07e00000 002ac008 002a102c 4003ff4c 00272664 00000000 00000000 00000000 Oct 3 10:28:31.284876 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 10:28:31.296887 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 10:28:31.308956 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 10:28:31.308956 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 10:28:31.321048 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 10:28:31.321116 (XEN) Xen call trace: Oct 3 10:28:31.321165 (XEN) [<00269e8c>] arch/arm/domain.c#idle_loop+0x134/0x1b0 (PC) Oct 3 10:28:31.337099 (XEN) [<0022c2d0>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 10:28:31.337161 (XEN) [<00272664>] arch_get_xen_caps+0/0x90 Oct 3 10:28:31.337209 (XEN) Oct 3 10:28:31.337299 (XEN) *** Dumping CPU1 host state: *** Oct 3 10:28:31.349025 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 10:28:31.349088 (XEN) CPU: 1 Oct 3 10:28:31.349130 (XEN) PC: 00269e8c arch/arm/domain.c#idle_loop+0x134/0x1b0 Oct 3 10:28:31.361027 (XEN) CPSR: 600f005a MODE:Hypervisor Oct 3 10:28:31.361099 (XEN) R0: 00000000 R1: 00000001 R2: 3fcf6000 R3: 00000000 Oct 3 10:28:31.361148 (XEN) R4: 00000001 R5: 00310108 R6: 0034333c R7: 00000002 Oct 3 10:28:31.373036 (XEN) R8: 00340108 R9: 00000001 R10:40e00000 R11:4000ff54 R12:fffffffc Oct 3 10:28:31.373099 (XEN) HYP: SP: 4000ff44 LR: 0022c2d0 Oct 3 10:28:31.385021 (XEN) Oct 3 10:28:31.385073 (XEN) VTCR_EL2: 80003558 Oct 3 10:28:31.385117 (XEN) VTTBR_EL2: 00010000bef8a000 Oct 3 10:28:31.385160 (XEN) Oct 3 10:28:31.385198 (XEN) SCTLR_EL2: 30cd187f Oct 3 10:28:31.396823 (XEN) HCR_EL2: 007c663f Oct 3 10:28:31.396882 (XEN) TTBR0_EL2: 00000000ba004000 Oct 3 10:28:31.396927 (XEN) Oct 3 10:28:31.396966 (XEN) ESR_EL2: 07e00000 Oct 3 10:28:31.397009 (XEN) HPFAR_EL2: 00104810 Oct 3 10:28:31.397051 (XEN) HDFAR: e0807f00 Oct 3 10:28:31.408891 (XEN) HIFAR: c0c0a630 Oct 3 10:28:31.408891 (XEN) Oct 3 10:28:31.408891 (XEN) Xen stack trace from sp=4000ff44: Oct 3 10:28:31.408891 (XEN) 07e00000 00311390 00000001 4000ff3c 00272f48 00000000 00000000 00000000 Oct 3 10:28:31.420846 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 10:28:31.420846 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 10:28:31.432894 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 10:28:31.444876 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 10:28:31.444876 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 10:28:31.456877 (XEN) Xen call trace: Oct 3 10:28:31.456877 (XEN) [<00269e8c>] arch/arm/domain.c#idle_loop+0x134/0x1b0 (PC) Oct 3 10:28:31.456877 (XEN) [<0022c2d0>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 10:28:31.468854 (XEN) [<00272f48>] start_secondary+0x208/0x20c Oct 3 10:28:31.468854 (XEN) Oct 3 10:28:31.468854 Oct 3 10:28:33.065558 (XEN) 'e' pressed -> dumping event-channel info Oct 3 10:28:33.088996 (XEN) Event channel information for domain 0: Oct 3 10:28:33.089057 (XEN) Polling vCPUs: {} Oct 3 10:28:33.089100 (XEN) port Oct 3 10:28:33.090418 [p/m/s] Oct 3 10:28:33.100892 (XEN) 1 [0/0/ - ]: s=3 n=1 x=0 d=0 p=4 Oct 3 10:28:33.100951 (XEN) 2 [0/0/ - ]: s=5 n=0 x=0 v=2 Oct 3 10:28:33.100998 (XEN) 3 [0/0/ - ]: s=5 n=1 x=0 v=3 Oct 3 10:28:33.112879 (XEN) 4 [0/0/ - ]: s=3 n=0 x=0 d=0 p=1 Oct 3 10:28:33.112879 Oct 3 10:28:35.064282 (XEN) gnttab_usage_print_all [ key 'g' pressed Oct 3 10:28:35.080971 (XEN) -------- active -------- -------- shared -------- Oct 3 10:28:35.081005 (XEN) [ref] localdom mfn pin Oct 3 10:28:35.083644 localdom gmfn flags Oct 3 10:28:35.092804 (XEN) grant-table for remote d0 (v1) Oct 3 10:28:35.092804 (XEN) 1 frames (64 max), 2 maptrack frames (1024 max) Oct 3 10:28:35.092804 (XEN) no active grant table entries Oct 3 10:28:35.104943 (XEN) gnttab_usage_print_all ] done Oct 3 10:28:35.105015 Oct 3 10:28:37.125536 Oct 3 10:28:38.856759 Oct 3 10:28:39.072865 (XEN) Physical memory information: Oct 3 10:28:39.096307 (XEN) Xen heap: 65116kB free Oct 3 10:28:39.096393 (XEN) heap[19]: 523252kB free Oct 3 10:28:39.096441 (XEN) heap[20]: 966404kB free Oct 3 10:28:39.096484 (XEN) Dom heap: 1489656kB free Oct 3 10:28:39.096526 Oct 3 10:28:39.097994 Oct 3 10:28:41.075729 Oct 3 10:28:42.864885 Oct 3 10:28:43.080414 (XEN) sched_smt_power_savings: disabled Oct 3 10:28:43.097050 (XEN) NOW=3216847595708 Oct 3 10:28:43.097107 (XEN) Online Cpus: 0-1 Oct 3 10:28:43.097151 (XEN) Cpupool 0: Oct 3 10:28:43.097191 (XEN) Cpus: 0-1 Oct 3 10:28:43.097274 (XEN) Sched Oct 3 10:28:43.098439 uling granularity: cpu, 1 CPU per sched-resource Oct 3 10:28:43.109031 (XEN) Scheduler: SMP Credit Scheduler rev2 (credit2) Oct 3 10:28:43.109091 (XEN) Active queues: 1 Oct 3 10:28:43.109135 (XEN) default-weight = 256 Oct 3 10:28:43.121013 (XEN) Runqueue 0: Oct 3 10:28:43.121069 (XEN) ncpus = 2 Oct 3 10:28:43.121114 (XEN) cpus = 0-1 Oct 3 10:28:43.121158 (XEN) max_weight = 256 Oct 3 10:28:43.121201 (XEN) pick_bias = 0 Oct 3 10:28:43.133007 (XEN) instload = 0 Oct 3 10:28:43.133064 (XEN) aveload = 1706 (~0%) Oct 3 10:28:43.133111 (XEN) idlers: 2 Oct 3 10:28:43.133152 (XEN) tickled: 0 Oct 3 10:28:43.145006 (XEN) fully idle cores: 2 Oct 3 10:28:43.145066 (XEN) Domain info: Oct 3 10:28:43.145109 (XEN) Domain: 0 w 256 c 0 v 2 Oct 3 10:28:43.145153 (XEN) 1: [0.0] flags=0 cpu=1 credit=9788636 [w=256] load=1177 (~0%) Oct 3 10:28:43.156877 (XEN) 2: [0.1] flags=0 cpu=0 credit=10500000 [w=256] load=493 (~0%) Oct 3 10:28:43.156877 (XEN) Runqueue 0: Oct 3 10:28:43.156877 (XEN) CPU[00] runq=0, sibling={0}, core={0-1} Oct 3 10:28:43.168871 (XEN) CPU[01] runq=0, sibling={1}, core={0-1} Oct 3 10:28:43.168871 (XEN) run: [0.0] flags=2 cpu=1 credit=9788636 [w=256] load=1167 (~0%) Oct 3 10:28:43.168871 (XEN) RUNQ: Oct 3 10:28:43.180870 (XEN) CPUs info: Oct 3 10:28:43.180870 (XEN) CPU[00] current=d[IDLE]v0, curr=d[IDLE]v0, prev=NULL Oct 3 10:28:43.180870 (XEN) CPU[01] current=d[IDLE]v1, curr=d[IDLE]v1, prev=NULL Oct 3 10:28:43.192794 Oct 3 10:28:45.086843 Oct 3 10:28:46.873418 Oct 3 10:28:47.083632 (XEN) Synced stime skew: max=125ns avg=125ns samples=1 current=125ns Oct 3 10:28:47.109023 (XEN) Synced cycles skew: max=2 avg=2 samples=1 current=2 Oct 3 10:28:47.109086 Oct 3 10:28:47.110301 Oct 3 10:28:49.091235 Oct 3 10:28:50.882280 Oct 3 10:28:51.099516 Oct 3 10:28:52.892303 Oct 3 10:28:53.166444 Oct 3 10:28:54.901377 Oct 3 10:29:05.139915 (XEN) 'q' pressed -> dumping domain info (now = 3238916613708) Oct 3 10:29:05.165897 (XEN) General information for domain 0: Oct 3 10:29:05.165959 (XEN) refcnt=3 dying=0 paus Oct 3 10:29:05.168092 e_count=0 Oct 3 10:29:05.177737 (XEN) nr_pages=131072 xenheap_pages=2 dirty_cpus={} max_pages=131072 Oct 3 10:29:05.177803 (XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=00000020 Oct 3 10:29:05.189774 (XEN) p2m mappings for domain 0 (vmid 1): Oct 3 10:29:05.189835 (XEN) 1G mappings: 0 (shattered 0) Oct 3 10:29:05.189881 (XEN) 2M mappings: 231 (shattered 25) Oct 3 10:29:05.201764 (XEN) 4K mappings: 5473 Oct 3 10:29:05.201822 (XEN) Rangesets belonging to domain 0: Oct 3 10:29:05.201869 (XEN) Interrupts { 32-72, 74, 77-79, 82-84, 86, 88-100, 103-104, 107-110, 114, 116-120, 123, 126-128, 138, 144, 146-147, 149-151, 156 } Oct 3 10:29:05.213835 (XEN) I/O Memory { 2020-2050, 3810-3811, 3830-3831, 3860-3861, 10000-10001, 10010-10045, 10050-10055, 10060-10061, 101b0-101b1, 101d0-101d1, 101e0-101e1, 10440-10441, 10800-10801, 10830-10831, 10850-10851, 10a60-10a61, 10d10-10d11, 11000-11010, 11200-11201, 11210-11211, 11400-11401, 11800-11805, 11c00-11c01, 11c10-11c11, 11d40-11d41, 11f20-11f21, 12000-12010, 12100-12101, 12110-12111, 12120-12121, 12130-12131, 12170-12171, 121a0-121a1, 121b0-121b1, 121d0-121d1, 12200-12201, 12210-12211, 12220-12221, 12230-12231, 12250-12251, 122f0-122f1, 12c00-12c01, 12c10-12c11, 12c30-12c31, 12c60-12c61, 12c70-12c71, 12c80-12c81, 12c90-12c91, 12ca0-12ca1, 12cb0-12cb1, 12cc0-12cc1, 12cd0-12cd1, 12ce0-12ce1, 12d10-12d11, 12d20-12d21, 12d30-12d31, 12d40-12d41, 12d60-12d61, 12d70-12d71, 12dd0-12dd1, 13260-13261, 13270-13271, 13280-13281, 13290-13291, 132a0-132a1, 132b0-132b1, 132c0-132c1, 132d0-132d1, 132e0-132e1, 132f0-132f1, 13400-13401, 13c40-13c41, 13c50-13c51, 13e00-13e01, 13e10-13e11, 13e20-13e21, 13e30-13e31, 13e80-13e81, 13e90-13e91, 13ea0-13ea1, 13eb0-13eb1, 14400-14440, 14450-14460, 14500-14510, 14530-145a0, 145b0-145b1, 14640-14641, 14650-14651 } Oct 3 10:29:05.309754 (XEN) NODE affinity for domain 0: [0] Oct 3 10:29:05.321729 (XEN) VCPU information and callbacks for domain 0: Oct 3 10:29:05.321790 (XEN) UNIT0 affinities: hard={0-1} soft={0-1} Oct 3 10:29:05.321838 (XEN) VCPU0: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 10:29:05.333682 (XEN) pause_count=0 pause_flags=1 Oct 3 10:29:05.333713 (XEN) GICH_LRs (vcpu 0) mask=0 Oct 3 10:29:05.333738 (XEN) VCPU_LR[0]=0 Oct 3 10:29:05.345703 (XEN) VCPU_LR[1]=0 Oct 3 10:29:05.345760 (XEN) VCPU_LR[2]=0 Oct 3 10:29:05.345802 (XEN) VCPU_LR[3]=0 Oct 3 10:29:05.345842 (XEN) No periodic timer Oct 3 10:29:05.345884 (XEN) UNIT1 affinities: hard={0-1} soft={0-1} Oct 3 10:29:05.357707 (XEN) VCPU1: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 10:29:05.357795 (XEN) pause_count=0 pause_flags=1 Oct 3 10:29:05.357824 (XEN) GICH_LRs (vcpu 1) mask=0 Oct 3 10:29:05.369697 (XEN) VCPU_LR[0]=0 Oct 3 10:29:05.369745 (XEN) VCPU_LR[1]=0 Oct 3 10:29:05.369787 (XEN) VCPU_LR[2]=0 Oct 3 10:29:05.369832 (XEN) VCPU_LR[3]=0 Oct 3 10:29:05.369875 (XEN) No periodic timer Oct 3 10:29:05.381761 (XEN) Notifying guest 0:0 (virq 1, port 0) Oct 3 10:29:05.381804 (XEN) Notifying guest 0:1 (virq 1, port 0) Oct 3 10:29:05.381844 Oct 3 10:29:17.130535 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 10:29:17.153794 Oct 3 10:29:17.153794 arndale-westfield login: Oct 3 10:29:17.155286 [ 3311.983411] sd 0:0:0:0: [sda] Synchronizing SCSI cache Oct 3 10:30:23.520847 [ 3312.003433] wake enabled for irq 119 (gpx1-4) Oct 3 10:30:23.544607 [ 3312.006428] wake enabled for irq 120 (gpx1-5) Oct 3 10:30:23.544607 [ 3312.010920] wake enabled for irq 121 (gpx1-6) Oct 3 10:30:23.556638 [ 3312.015283] wake enabled for irq 122 (gpx1-7) Oct 3 10:30:23.556638 [ 3312.019751] wake enabled for irq 123 (gpx2-0) Oct 3 10:30:23.556638 [ 3312.024135] wake enabled for irq 124 (gpx2-1) Oct 3 10:30:23.568639 [ 3312.029090] reboot: Resô Oct 3 10:30:23.904723 Oct 3 10:30:23.904723 Oct 3 10:30:23.904723 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 10:30:23.904723 Oct 3 10:30:23.904723 CPU: Exynos5250@1000MHz Oct 3 10:30:23.904723 Oct 3 10:30:23.904723 Board: Arndale Oct 3 10:30:23.916706 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 10:30:23.916706 ready Oct 3 10:30:23.916706 DRAM: 2 GiB Oct 3 10:30:23.916706 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 10:30:23.940648 trace: enabled Oct 3 10:30:23.976655 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 10:30:24.336662 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 10:30:24.396890 In: serial Oct 3 10:30:24.396962 Out: serial Oct 3 10:30:24.397003 Err: serial Oct 3 10:30:24.397042 SCSI: ARNDALE SCSI INIT Oct 3 10:30:24.397084 Target spinup took 0 ms. Oct 3 10:30:24.408892 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 10:30:24.408954 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 10:30:24.409003 Net: Net Initialization Skipped Oct 3 10:30:24.420874 No ethernet found. Oct 3 10:30:24.420929 Hostname: arndale-westfield Oct 3 10:30:24.420973 Hit any key to stop autoboot: 2  1  0 Oct 3 10:30:26.344865 (Re)start USB... Oct 3 10:30:26.344865 USB0: USB EHCI 1.00 Oct 3 10:30:26.356794 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 10:30:31.949825 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 10:30:31.949907 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 10:30:32.393722 Waiting for Ethernet connection... done. Oct 3 10:30:33.989839 BOOTP broadcast 1 Oct 3 10:30:34.003844 BOOTP broadcast 2 Oct 3 10:30:35.105634 DHCP client bound to address 10.149.64.45 (1157 ms) Oct 3 10:30:35.117659 Using asx0 device Oct 3 10:30:35.117659 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 10:30:35.117659 Filename 'pxelinux.0'. Oct 3 10:30:35.117659 Load address: 0x43e00000 Oct 3 10:30:35.129595 Loading: *### Oct 3 10:30:35.141657 2.4 MiB/s Oct 3 10:30:35.141657 done Oct 3 10:30:35.141657 Bytes transferred = 42430 (a5be hex) Oct 3 10:30:35.141657 missing environment variable: pxeuuid Oct 3 10:30:35.153655 Retrieving file: pxelinux.cfg/0A95402D Oct 3 10:30:35.153655 Using asx0 device Oct 3 10:30:35.153655 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 10:30:35.153655 Filename 'pxelinux.cfg/0A95402D'. Oct 3 10:30:35.165665 Load address: 0x51000000 Oct 3 10:30:35.165665 Loading: *# Oct 3 10:30:35.165665 355.5 KiB/s Oct 3 10:30:35.165665 done Oct 3 10:30:35.165665 Bytes transferred = 728 (2d8 hex) Oct 3 10:30:35.165665 Config file found Oct 3 10:30:35.177662 Ignoring unknown command: serial Oct 3 10:30:35.177662 1: ^Overwrite Oct 3 10:30:35.177662 Retrieving file: /osstest/tmp//arndale-westfield--initrd.gz Oct 3 10:30:35.177662 Using asx0 device Oct 3 10:30:35.189721 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 10:30:35.189721 Filename '/osstest/tmp//arndale-westfield--initrd.gz'. Oct 3 10:30:35.189721 Load address: 0x43300000 Oct 3 10:30:35.201598 Loading: *################################################################# Oct 3 10:30:35.513747 ################################################################# Oct 3 10:30:35.813726 ################################################################# Oct 3 10:30:36.125655 ################################################################# Oct 3 10:30:36.449704 ################################################################# Oct 3 10:30:36.761687 ################################################################# Oct 3 10:30:37.049670 ################################################################# Oct 3 10:30:37.361700 ################################################################# Oct 3 10:30:37.689666 ################################################################# Oct 3 10:30:38.013688 ################################################################# Oct 3 10:30:38.337653 ################################################################# Oct 3 10:30:38.661678 ################################################################# Oct 3 10:30:38.985703 ################################################################# Oct 3 10:30:39.309698 ################################################################# Oct 3 10:30:39.633630 ################################################################# Oct 3 10:30:39.961570 ################################################################# Oct 3 10:30:40.285650 ################################################################# Oct 3 10:30:40.609695 ################################################################# Oct 3 10:30:40.933706 ################################################################# Oct 3 10:30:41.269705 ################################################################# Oct 3 10:30:41.581716 ################################################################# Oct 3 10:30:41.893694 ################################################################# Oct 3 10:30:42.193539 ################################################################# Oct 3 10:30:42.505640 ################################################################# Oct 3 10:30:42.817693 ################################################################# Oct 3 10:30:43.105620 ################################################################# Oct 3 10:30:43.417621 ################################################################# Oct 3 10:30:43.729580 ######################################## Oct 3 10:30:43.897605 2.8 MiB/s Oct 3 10:30:43.897636 done Oct 3 10:30:43.897658 Bytes transferred = 26339180 (191e76c hex) Oct 3 10:30:43.897682 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/linux Oct 3 10:30:43.909625 Using asx0 device Oct 3 10:30:43.909654 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 10:30:43.921697 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/linux'. Oct 3 10:30:43.921732 Load address: 0x42000000 Oct 3 10:30:43.933588 Loading: *################################################################# Oct 3 10:30:44.257640 ################################################################# Oct 3 10:30:44.581618 ################################################################# Oct 3 10:30:44.909593 ################################################################# Oct 3 10:30:45.229591 ################################################################# Oct 3 10:30:45.553631 ############################################# Oct 3 10:30:45.781607 2.7 MiB/s Oct 3 10:30:45.781637 done Oct 3 10:30:45.781659 Bytes transferred = 5427712 (52d200 hex) Oct 3 10:30:45.781683 append: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=37717 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 10:30:45.829647 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb Oct 3 10:30:45.841647 Using asx0 device Oct 3 10:30:45.841677 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 10:30:45.841704 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb'. Oct 3 10:30:45.853674 Load address: 0x43000000 Oct 3 10:30:45.853704 Loading: *#### Oct 3 10:30:45.877684 2.5 MiB/s Oct 3 10:30:45.877714 done Oct 3 10:30:45.877736 Bytes transferred = 46686 (b65e hex) Oct 3 10:30:45.877760 Kernel image @ 0x42000000 [ 0x000000 - 0x52d200 ] Oct 3 10:30:45.877785 ## Flattened Device Tree blob at 43000000 Oct 3 10:30:45.889689 Booting using the fdt blob at 0x43000000 Oct 3 10:30:45.889721 Loading Ramdisk to 4e6e1000, end 4ffff76c ... OK Oct 3 10:30:46.313633 Loading Device Tree to 4e6d2000, end 4e6e065d ... OK Oct 3 10:30:46.313667 Oct 3 10:30:46.325641 Starting kernel ...(fake run for tracing) Oct 3 10:30:46.325674 Oct 3 10:30:46.325695 Oct 3 10:30:46.337626 Starting kernel ... Oct 3 10:30:46.337660 Oct 3 10:30:46.337681 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 10:30:52.385875 [ 0.000000] Linux version 6.1.0-25-armmp (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.106-3 (2024-08-26) Oct 3 10:30:52.397822 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 10:30:52.409742 [ 0.000000] CPU: div instructions available: patching division code Oct 3 10:30:52.409806 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 10:30:52.421784 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 10:30:52.433747 [ 0.000000] Memory policy: Data cache writealloc Oct 3 10:30:52.433805 [ 0.000000] efi: UEFI not found. Oct 3 10:30:52.433850 [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 Oct 3 10:30:52.445718 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 10:30:52.445772 [ 0.000000] Zone ranges: Oct 3 10:30:52.445815 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 10:30:52.457717 [ 0.000000] Normal empty Oct 3 10:30:52.457768 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 10:30:52.457816 [ 0.000000] Movable zone start for each node Oct 3 10:30:52.469705 [ 0.000000] Early memory node ranges Oct 3 10:30:52.469778 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 10:30:52.481720 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 10:30:52.481778 [ 0.000000] percpu: Embedded 18 pages/cpu s44692 r8192 d20844 u73728 Oct 3 10:30:52.493704 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 10:30:52.493762 [ 0.000000] Kernel command line: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=37717 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 10:30:52.541728 [ 0.000000] Unknown kernel command line parameters "preseed --- vga=normal auto=true hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=37717 domain=test-lab.xenproject.org", will be passed to user space. Oct 3 10:30:52.577835 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 10:30:52.589769 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 10:30:52.589837 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 10:30:52.601792 [ 0.000000] Memory: 2015968K/2097152K available (11264K kernel code, 1696K rwdata, 3724K rodata, 2048K init, 376K bss, 64800K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 10:30:52.613797 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 10:30:52.625819 [ 0.000000] ftrace: allocating 39612 entries in 117 pages Oct 3 10:30:52.625881 [ 0.000000] ftrace: allocated 117 pages with 5 groups Oct 3 10:30:52.637777 [ 0.000000] trace event string verifier disabled Oct 3 10:30:52.637830 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 10:30:52.637876 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 10:30:52.649787 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 10:30:52.649848 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 10:30:52.661718 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 10:30:52.661787 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 10:30:52.673785 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 10:30:52.673848 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 10:30:52.685730 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 10:30:52.685807 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 10:30:52.697743 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 10:30:52.697831 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 10:30:52.709758 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 10:30:52.721742 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 10:30:52.721810 [ 0.002615] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 10:30:52.733753 [ 0.002628] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 10:30:52.745749 [ 0.002642] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 10:30:52.745820 [ 0.002654] Ignoring duplicate/late registration of read_current_timer delay Oct 3 10:30:52.757769 [ 0.003013] Console: colour dummy device 80x30 Oct 3 10:30:52.757829 [ 0.003053] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 10:30:52.769778 [ 0.003066] CPU: Testing write buffer coherency: ok Oct 3 10:30:52.781737 [ 0.003108] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 10:30:52.781809 [ 0.003116] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 10:30:52.793754 [ 0.003122] pid_max: default: 32768 minimum: 301 Oct 3 10:30:52.793814 [ 0.003482] LSM: Security Framework initializing Oct 3 10:30:52.805794 [ 0.003554] landlock: Up and running. Oct 3 10:30:52.805852 [ 0.003560] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 10:30:52.817760 [ 0.003742] AppArmor: AppArmor initialized Oct 3 10:30:52.817819 [ 0.003754] TOMOYO Linux initialized Oct 3 10:30:52.817864 [ 0.003799] LSM support for eBPF active Oct 3 10:30:52.817909 [ 0.004043] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 10:30:52.829750 [ 0.004057] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 10:30:52.841755 [ 0.005483] /cpus/cpu@0 missing clock-frequency property Oct 3 10:30:52.841817 [ 0.005510] /cpus/cpu@1 missing clock-frequency property Oct 3 10:30:52.853744 [ 0.005524] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 10:30:52.853807 [ 0.006483] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 10:30:52.865756 [ 0.006489] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 10:30:52.865818 [ 0.006594] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 10:30:52.877748 [ 0.006600] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 10:30:52.877810 [ 0.006747] Setting up static identity map for 0x40300000 - 0x403000ac Oct 3 10:30:52.889731 [ 0.007899] rcu: Hierarchical SRCU implementation. Oct 3 10:30:52.889791 [ 0.007905] rcu: Max phase no-delay instances is 1000. Oct 3 10:30:52.901752 [ 0.010026] EFI services will not be available. Oct 3 10:30:52.901812 [ 0.010373] smp: Bringing up secondary CPUs ... Oct 3 10:30:52.901859 [ 0.011117] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 10:30:52.913763 [ 0.011129] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 10:30:52.925760 [ 0.011273] smp: Brought up 1 node, 2 CPUs Oct 3 10:30:52.925820 [ 0.011281] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 10:30:52.937725 [ 0.011289] CPU: All CPU(s) started in HYP mode. Oct 3 10:30:52.937787 [ 0.011292] CPU: Virtualization extensions available. Oct 3 10:30:52.937879 [ 0.011915] devtmpfs: initialized Oct 3 10:30:52.949727 [ 0.023284] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 10:30:52.949824 [ 0.023517] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 10:30:52.961729 [ 0.023542] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 10:30:52.973719 [ 0.024071] pinctrl core: initialized pinctrl subsystem Oct 3 10:30:52.973774 [ 0.024770] DMI not present or invalid. Oct 3 10:30:52.973819 [ 0.025442] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 10:30:52.985719 [ 0.030840] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 10:30:52.985778 [ 0.032375] audit: initializing netlink subsys (disabled) Oct 3 10:30:52.997766 [ 0.032581] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 Oct 3 10:30:53.009714 [ 0.033740] thermal_sys: Registered thermal governor 'fair_share' Oct 3 10:30:53.009771 [ 0.033748] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 10:30:53.021752 [ 0.033753] thermal_sys: Registered thermal governor 'step_wise' Oct 3 10:30:53.021819 [ 0.033757] thermal_sys: Registered thermal governor 'user_space' Oct 3 10:30:53.033721 [ 0.033762] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 10:30:53.033778 [ 0.034138] No ATAGs? Oct 3 10:30:53.033821 [ 0.034207] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 10:30:53.045694 [ 0.034216] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 10:30:53.045748 [ 0.035303] Serial: AMBA PL011 UART driver Oct 3 10:30:53.057736 [ 0.084759] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 10:30:53.057806 [ 0.091783] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 10:30:53.069757 [ 0.102803] iommu: Default domain type: Translated Oct 3 10:30:53.081739 [ 0.102811] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 10:30:53.081803 [ 0.103783] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 10:30:53.093747 [ 0.104321] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 10:30:53.093809 [ 0.104332] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 10:30:53.093858 [ 0.104865] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 10:30:53.105832 [ 0.104895] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 10:30:53.117830 [ 0.105077] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 10:30:53.117890 [ 0.105427] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 10:30:53.129802 [ 0.105437] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 10:30:53.129865 [ 0.105831] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 10:30:53.141820 [ 0.106118] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 10:30:53.141880 [ 0.106129] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 10:30:53.153805 [ 0.106407] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 10:30:53.153866 [ 0.106509] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 10:30:53.153914 [ 0.106518] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 10:30:53.165809 [ 0.106719] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 10:30:53.165870 [ 0.106912] pps_core: LinuxPPS API ver. 1 registered Oct 3 10:30:53.177834 [ 0.106918] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 10:30:53.189819 [ 0.106933] PTP clock support registered Oct 3 10:30:53.189879 [ 0.108578] NetLabel: Initializing Oct 3 10:30:53.189924 [ 0.108585] NetLabel: domain hash size = 128 Oct 3 10:30:53.201847 [ 0.108590] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 10:30:53.201913 [ 0.108645] NetLabel: unlabeled traffic allowed by default Oct 3 10:30:53.201988 [ 0.108827] vgaarb: loaded Oct 3 10:30:53.213813 [ 0.109491] clocksource: Switched to clocksource mct-frc Oct 3 10:30:53.213876 [ 0.110121] VFS: Disk quotas dquot_6.6.0 Oct 3 10:30:53.213922 [ 0.110208] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 10:30:53.225821 [ 0.110956] AppArmor: AppArmor Filesystem Enabled Oct 3 10:30:53.225881 [ 0.120925] NET: Registered PF_INET protocol family Oct 3 10:30:53.237834 [ 0.121153] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 10:30:53.237903 [ 0.122770] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 10:30:53.249841 [ 0.122872] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 10:30:53.261794 [ 0.122899] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 10:30:53.261861 [ 0.122997] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 10:30:53.273837 [ 0.123227] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 10:30:53.285827 [ 0.123455] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 10:30:53.285897 [ 0.123547] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 10:30:53.297834 [ 0.123588] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 10:30:53.297900 [ 0.123785] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 10:30:53.309824 [ 0.123821] NET: Registered PF_XDP protocol family Oct 3 10:30:53.309885 [ 0.123831] PCI: CLS 0 bytes, default 64 Oct 3 10:30:53.309931 [ 0.124945] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 10:30:53.321826 [ 0.125201] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 10:30:53.333836 [ 0.129857] Trying to unpack rootfs image as initramfs... Oct 3 10:30:53.333897 [ 0.183875] Initialise system trusted keyrings Oct 3 10:30:53.345819 [ 0.184005] Key type blacklist registered Oct 3 10:30:53.345879 [ 0.184234] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 10:30:53.345930 [ 0.191648] zbud: loaded Oct 3 10:30:53.357820 [ 0.192755] integrity: Platform Keyring initialized Oct 3 10:30:53.357881 [ 0.192803] integrity: Machine keyring initialized Oct 3 10:30:53.357928 [ 0.192811] Key type asymmetric registered Oct 3 10:30:53.369799 [ 0.192819] Asymmetric key parser 'x509' registered Oct 3 10:30:53.369860 [ 1.499841] Freeing initrd memory: 25724K Oct 3 10:30:53.381820 [ 1.511205] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 10:30:53.381883 [ 1.511492] bounce: pool size: 64 pages Oct 3 10:30:53.381929 [ 1.511656] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 10:30:53.393831 [ 1.511823] io scheduler mq-deadline registered Oct 3 10:30:53.393890 [ 1.516970] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 10:30:53.405863 [ 1.537800] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 10:30:53.417799 [ 1.537812] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 10:30:53.417871 [ 1.540090] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 10:30:53.429740 [ 1.540100] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 10:30:53.441734 [ 1.540933] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 10:30:53.441802 [ 1.540942] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 10:30:53.453783 [ 1.541801] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 10:30:53.465733 [ 1.541810] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 10:30:53.477743 [ 1.544151] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 10:30:53.477885 [ 1.547003] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 10:30:53.489771 [ 1.549763] Serial: AMBA driver Oct 3 10:30:53.489859 [ 1.550006] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 10:30:53.501768 [ 1.550485] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 10:30:53.513759 [ 1.550953] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 10:30:53.513830 [ 2.689056] printk: console [ttySAC2] enabled Oct 3 10:30:53.525750 [ 2.693892] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 10:30:53.525821 [ 2.704506] STM32 USART driver initialized Oct 3 10:30:53.537735 [ 2.718631] mousedev: PS/2 mouse device common for all mice Oct 3 10:30:53.549726 [ 2.749952] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 10:30:53.585713 [ 2.758556] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T10:30:55 UTC (1727951455) Oct 3 10:30:53.597716 [ 2.768404] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 10:30:53.597780 [ 2.775858] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 10:30:53.609717 [ 2.783827] NET: Registered PF_INET6 protocol family Oct 3 10:30:53.621635 [ 2.797429] Segment Routing with IPv6 Oct 3 10:30:53.633688 [ 2.799717] In-situ OAM (IOAM) with IPv6 Oct 3 10:30:53.633740 [ 2.803643] mip6: Mobile IPv6 Oct 3 10:30:53.633785 [ 2.806507] NET: Registered PF_PACKET protocol family Oct 3 10:30:53.645685 [ 2.811662] mpls_gso: MPLS GSO support Oct 3 10:30:53.645737 [ 2.815910] ThumbEE CPU extension supported. Oct 3 10:30:53.645783 [ 2.819637] Registering SWP/SWPB emulation handler Oct 3 10:30:53.657697 [ 2.824775] registered taskstats version 1 Oct 3 10:30:53.657749 [ 2.828419] Loading compiled-in X.509 certificates Oct 3 10:30:53.657796 [ 3.288863] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 10:30:54.125784 [ 3.296229] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 10:30:54.137763 [ 3.307245] zswap: loaded using pool lzo/zbud Oct 3 10:30:54.137822 [ 3.311221] Key type .fscrypt registered Oct 3 10:30:54.149714 [ 3.314542] Key type fscrypt-provisioning registered Oct 3 10:30:54.149775 [ 3.328267] Key type encrypted registered Oct 3 10:30:54.161761 [ 3.330863] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 10:30:54.161823 [ 3.336360] ima: No TPM chip found, activating TPM-bypass! Oct 3 10:30:54.173763 [ 3.341780] ima: Allocated hash algorithm: sha256 Oct 3 10:30:54.173824 [ 3.346576] ima: No architecture policies found Oct 3 10:30:54.185749 [ 3.351008] evm: Initialising EVM extended attributes: Oct 3 10:30:54.185810 [ 3.356085] evm: security.selinux Oct 3 10:30:54.185855 [ 3.359374] evm: security.SMACK64 (disabled) Oct 3 10:30:54.197745 [ 3.363624] evm: security.SMACK64EXEC (disabled) Oct 3 10:30:54.197806 [ 3.368225] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 10:30:54.197854 [ 3.373258] evm: security.SMACK64MMAP (disabled) Oct 3 10:30:54.209746 [ 3.377863] evm: security.apparmor Oct 3 10:30:54.209804 [ 3.381230] evm: security.ima Oct 3 10:30:54.209848 [ 3.384196] evm: security.capability Oct 3 10:30:54.221705 [ 3.387754] evm: HMAC attrs: 0x1 Oct 3 10:30:54.221763 [ 3.975498] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 10:30:54.809780 [ 3.981481] clk: Disabling unused clocks Oct 3 10:30:54.809839 [ 3.995196] Freeing unused kernel image (initmem) memory: 2048K Oct 3 10:30:54.833672 [ 4.000038] Checked W+X mappings: passed, no W+X pages found Oct 3 10:30:54.833706 [ 4.005318] Run /init as init process Oct 3 10:30:54.833731 [ 4.575391] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 10:30:55.409798 [ 4.622475] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 10:30:55.457717 [ 4.646705] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 10:30:55.481759 [ 4.654131] usbcore: registered new interface driver usbfs Oct 3 10:30:55.493741 [ 4.658804] usbcore: registered new interface driver hub Oct 3 10:30:55.493804 [ 4.667100] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 10:30:55.505717 [ 4.668450] usbcore: registered new device driver usb Oct 3 10:30:55.505777 [ 4.684057] phy phy-12130000.phy.1: phy_power_on was called before phy_init Oct 3 10:30:55.517749 [ 4.690283] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 10:30:55.529756 [ 4.696585] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Oct 3 10:30:55.529826 [ 4.703316] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Oct 3 10:30:55.541750 [ 4.710283] phy phy-12130000.phy.1: phy_power_on was called before phy_init Oct 3 10:30:55.541814 [ 4.715799] exynos-ohci 12120000.usb: USB Host Controller Oct 3 10:30:55.553761 [ 4.721190] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Oct 3 10:30:55.553829 [ 4.740087] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 10:30:55.577689 [ 4.753882] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 10:30:55.589713 [ 4.760732] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 10:30:55.601744 [ 4.767914] usb usb1: Product: EHCI Host Controller Oct 3 10:30:55.601804 [ 4.768400] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 10:30:55.601853 [ 4.772760] usb usb1: Manufacturer: Linux 6.1.0-25-armmp ehci_hcd Oct 3 10:30:55.613737 [ 4.772769] usb usb1: SerialNumber: 12110000.usb Oct 3 10:30:55.613797 [ 4.788871] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Oct 3 10:30:55.625754 [ 4.795503] hub 1-0:1.0: USB hub found Oct 3 10:30:55.625812 [ 4.798404] hub 1-0:1.0: 3 ports detected Oct 3 10:30:55.625858 [ 4.867375] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 10:30:55.697738 [ 4.874236] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 10:30:55.709742 [ 4.881419] usb usb2: Product: USB Host Controller Oct 3 10:30:55.709808 [ 4.886178] usb usb2: Manufacturer: Linux 6.1.0-25-armmp ohci_hcd Oct 3 10:30:55.721714 [ 4.892254] usb usb2: SerialNumber: 12120000.usb Oct 3 10:30:55.721768 [ 4.905167] hub 2-0:1.0: USB hub found Oct 3 10:30:55.733710 [ 4.908487] hub 2-0:1.0: 3 ports detected Oct 3 10:30:55.745643 [ 4.917635] usb3503 usb-hub: switched to HUB mode Oct 3 10:30:55.745672 [ 4.920873] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 10:30:55.757690 [ 5.191824] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 10:30:56.021766 [ 5.195882] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 10:30:56.033796 [ 5.203988] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 10:30:56.045724 [ 5.212918] xhci-hcd xhci-hcd.2.auto: irq 108, io mem 0x12000000 Oct 3 10:30:56.045724 [ 5.219125] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 10:30:56.057787 [ 5.224337] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 10:30:56.057861 [ 5.231975] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 10:30:56.069754 [ 5.238657] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 10:30:56.081701 [ 5.246735] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 10:30:56.081768 [ 5.253933] usb usb3: Product: xHCI Host Controller Oct 3 10:30:56.093707 [ 5.258783] usb usb3: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 10:30:56.093797 [ 5.264858] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 10:30:56.093847 [ 5.269735] usb 1-3: new high-speed USB device number 2 using exynos-ehci Oct 3 10:30:56.105768 [ 5.274969] hub 3-0:1.0: USB hub found Oct 3 10:30:56.105827 [ 5.280352] hub 3-0:1.0: 1 port detected Oct 3 10:30:56.117745 [ 5.285166] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 10:30:56.117814 [ 5.292347] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 10:30:56.129779 [ 5.300461] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 10:30:56.141708 [ 5.307671] usb usb4: Product: xHCI Host Controller Oct 3 10:30:56.141741 [ 5.312519] usb usb4: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 10:30:56.153699 [ 5.318594] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 10:30:56.153760 [ 5.324577] hub 4-0:1.0: USB hub found Oct 3 10:30:56.153807 [ 5.327231] hub 4-0:1.0: 1 port detected Oct 3 10:30:56.165629 [ 5.429876] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Oct 3 10:30:56.261756 [ 5.436615] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 3 10:30:56.273735 [ 5.444450] hub 1-3:1.0: USB hub found Oct 3 10:30:56.273793 [ 5.447623] hub 1-3:1.0: 3 ports detected Oct 3 10:30:56.285699 Starting system log daemon: syslogd, klogd. Oct 3 10:30:56.417584 /var/run/utmp: No such file or directory Oct 3 10:30:58.253678 [?1h=(B   Oct 3 10:30:58.301772  Oct 3 10:30:58.301833 [  (-*) ][ Oct 03 10:31 ] Oct 3 10:30:58.313792 [  (0*start) ][ Oct 03 10:31 ] Oct 3 10:30:58.325796 [  (0*start) ][ Oct 03 10:31 ] Oct 3 10:30:58.349739 [  (0*start) ][ Oct 03 10:31 ] Oct 3 10:30:58.361787 [  (0*start) ][ Oct 03 10:31 ]                        [  (0*start) ][ Oct 03 10:31 ][  (0*start) ][ Oct 03 10:31 ] Oct 3 10:30:58.409797 [ 0- start  (2*shell) ][ Oct 03 10:31 ] Oct 3 10:30:58.433780 [ 0- start  (2*shell) ][ Oct 03 10:31 ] Oct 3 10:30:58.445779 [ 0- start  (2*shell) ][ Oct 03 10:31 ] Oct 3 10:30:58.457738 [ 0- start  (2*shell) ][ Oct 03 10:31 ]                        [ 0- start  (2*shell) ][ Oct 03 10:31 ][ 0- start  (2*shell) ][ Oct 03 10:31 ] Oct 3 10:30:58.517818 [ 0 start 2- shell  (3*shell) ][ Oct 03 10:31 ] Oct 3 10:30:58.529738 [ 0 start 2- shell  (3*shell) ][ Oct 03 10:31 ] Oct 3 10:30:58.541792 [ 0 start 2- shell  (3*shell) ][ Oct 03 10:31 ] Oct 3 10:30:58.553742 [ 0 start 2- shell  (3*shell) ][ Oct 03 10:31 ]                        [ 0 start 2- shell  (3*shell) ][ Oct 03 10:31 ][ 0 start 2- shell  (3*shell) ][ Oct 03 10:31 ] Oct 3 10:30:58.613794 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 10:31 ] Oct 3 10:30:58.625784 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 10:31 ] Oct 3 10:30:58.637792 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 10:31 ] Oct 3 10:30:58.649778 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 10:31 ]                        [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 10:31 ][ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 10:31 ] Oct 3 10:30:58.709777 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 10:31 ] Oct 3 10:30:58.721746 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 10:31 ] Oct 3 10:30:58.733781 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 10:31 ] Oct 3 10:30:58.745682 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 10:31 ]                        [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 10:31 ][ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 10:31 ] Oct 3 10:30:58.805736 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 10:31 ] Oct 3 10:30:58.817791 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 10:31 ] Oct 3 10:30:58.829663 [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 10:31 ] Oct 3 10:30:59.285755 Detecting network hardware ... 2%... 95%... 100% Oct 3 10:31:01.013668 Detecting link on eth0; please wait... ... 0%... 10%... 20% Oct 3 10:31:05.921780 Waiting for link-local address... ... 8%... 16%... 25%... 33%... 100% Oct 3 10:31:06.941662 Attempting IPv6 autoconfiguration... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 75%... 83%... 91%... 100% Oct 3 10:31:13.013724 Configuring the network with DHCP ... 0%... 100% Oct 3 10:31:16.181725 Checking the Debian archive mirror ... 25%... 50%... 75%... 100% Oct 3 10:31:24.281577 Loading additional components ... 0%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Oct 3 10:31:57.573589 [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 10:32 ] Setting up the clock ... 0%... 100% Oct 3 10:32:00.345735 Loading additional components ... 50%... 100% Oct 3 10:32:02.001762 Detecting disks and all other hardware ... 2%... 95%... 100% Oct 3 10:32:06.609604 Loading additional components ... 12%... 25%... 37%... 50%... 62%... 75%... 87%... 100% Oct 3 10:32:13.585775 Loading additional components ... 25%... 50%... 75%... 100% Oct 3 10:32:15.973699 Starting up the partitioner ... 4%... 13%... 21%... 30%... 43%... 52%... 60%... 73%... 82%... 91%... 100% Oct 3 10:32:27.749630 Guided partitioning ... 16%... 33%... 50%... 66%... 83%... 100% Oct 3 10:32:36.133575 Starting up the partitioner ... 4%... 12%... 20%... 32%... 40%... 52%... 60%... 72%... 80%... 92%... 100% Oct 3 10:32:47.229687 Partitions formatting ... 33% Oct 3 10:32:56.005673 Partitions formatting [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 10:33 ] Oct 3 10:33:05.121630 Partitions formatting Installing the base system ... 0%... 17%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 10:34 ]... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 10:35 ]... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 10:36 ]... 48%... 50%...  Oct 3 10:36:54.317840  60%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 10:37 ]... 70%... 79%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 10:38 ]... 83%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 10:39 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 10:40 ]... 91%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 10:41 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 10:42 ]... 100% Oct 3 10:42:35.589530 Configuring apt ... 7%... 14%... 14%... 21%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 10:43 ]... 35%... 42%... 50%... 61%... 71%. Oct 3 10:43:12.928820 ... 82%... 92%... 100% Oct 3 10:43:15.512800 Select and install software ... 1%... 10%... 13%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 10:44 ]... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 10:45 ]... 40%... 50%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 10:46 ]... Oct 3 10:46:06.937671 . 60%... 70%... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 10:47 ]... 88%... 90%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 10:48 ]... 94%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 10:49 ]... 100% Oct 3 10:49:16.420808 Finishing the installation ... 4%... 12%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 10:50 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 10:51 ]... 16%... 20%... 32%... 40%... 44%... Oct 3 10:51:27.845662  52%... 60%... 72%... 80%... 92% The system is going down NOW! Sent SIGKILL to all processes Oct 3 10:51:38.865798 Requesting system reboot Oct 3 10:51:38.865861 [ 1249.074315] reboot: Re˙ Oct 3 10:51:40.233786 Oct 3 10:51:40.233848 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 10:51:40.233902 Oct 3 10:51:40.233941 CPU: Exynos5250@1000MHz Oct 3 10:51:40.233985 Oct 3 10:51:40.234023 Board: Arndale Oct 3 10:51:40.234064 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 10:51:40.245733 ready Oct 3 10:51:40.245786 DRAM: 2 GiB Oct 3 10:51:40.245829 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 10:51:40.257753 trace: enabled Oct 3 10:51:40.293712 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 10:51:40.653734 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 10:51:40.713719 In: serial Oct 3 10:51:40.713774 Out: serial Oct 3 10:51:40.725759 Err: serial Oct 3 10:51:40.725814 SCSI: ARNDALE SCSI INIT Oct 3 10:51:40.725859 Target spinup took 0 ms. Oct 3 10:51:40.725903 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 10:51:40.737777 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 10:51:40.737839 Net: Net Initialization Skipped Oct 3 10:51:40.737884 No ethernet found. Oct 3 10:51:40.749737 Hostname: arndale-westfield Oct 3 10:51:40.749795 Hit any key to stop autoboot: 2  1  0 Oct 3 10:51:42.661697 (Re)start USB... Oct 3 10:51:42.673709 USB0: USB EHCI 1.00 Oct 3 10:51:42.673766 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 10:51:48.273848 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 10:51:48.285678 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 10:51:48.729713 Waiting for Ethernet connection... done. Oct 3 10:51:50.325728 BOOTP broadcast 1 Oct 3 10:51:50.325794 BOOTP broadcast 2 Oct 3 10:51:52.521740 DHCP client bound to address 10.149.64.45 (2291 ms) Oct 3 10:51:52.521789 Using asx0 device Oct 3 10:51:52.521812 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 10:51:52.533685 Filename 'pxelinux.0'. Oct 3 10:51:52.533736 Load address: 0x43e00000 Oct 3 10:51:52.533781 Loading: *### Oct 3 10:51:52.545622 2.4 MiB/s Oct 3 10:51:52.557715 done Oct 3 10:51:52.557744 Bytes transferred = 42430 (a5be hex) Oct 3 10:51:52.557802 missing environment variable: pxeuuid Oct 3 10:51:52.557847 Retrieving file: pxelinux.cfg/0A95402D Oct 3 10:51:52.557891 Using asx0 device Oct 3 10:51:52.569709 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 10:51:52.569743 Filename 'pxelinux.cfg/0A95402D'. Oct 3 10:51:52.569767 Load address: 0x51000000 Oct 3 10:51:52.569790 Loading: *# Oct 3 10:51:52.581703 31.3 KiB/s Oct 3 10:51:52.581733 done Oct 3 10:51:52.581755 Bytes transferred = 65 (41 hex) Oct 3 10:51:52.581779 Config file found Oct 3 10:51:52.581801 Ignoring unknown command: serial Oct 3 10:51:52.581825 1: local Oct 3 10:51:52.581846 scanning bus for devices... Oct 3 10:51:52.593649 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 10:51:52.617694 Type: Hard Disk Oct 3 10:51:52.629703 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 10:51:52.629737 Found 1 device(s). Oct 3 10:51:52.629761 Oct 3 10:51:52.629781 SCSI device 0: Oct 3 10:51:52.629803 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 10:51:52.641715 Type: Hard Disk Oct 3 10:51:52.641745 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 10:51:52.641772 ... is now current device Oct 3 10:51:52.653669 Scanning scsi 0... Oct 3 10:51:52.653699 Found U-Boot script /boot.scr Oct 3 10:51:52.761663 639 bytes read in 42 ms (14.6 KiB/s) Oct 3 10:51:52.809681 ## Executing script at 50000000 Oct 3 10:51:52.809735 Loading dtbs/exynos5250-arndale.dtb Oct 3 10:51:52.821655 46686 bytes read in 1640 ms (27.3 KiB/s) Oct 3 10:51:54.417741 Loading vmlinuz-6.1.0-25-armmp-lpae Oct 3 10:51:54.417815 5509632 bytes read in 186 ms (28.2 MiB/s) Oct 3 10:51:54.621679 Loading initrd.img-6.1.0-25-armmp-lpae Oct 3 10:51:54.621711 25732452 bytes read in 1909 ms (12.9 MiB/s) Oct 3 10:51:56.469751 Booting Oct 3 10:51:56.469824 Kernel image @ 0x42000000 [ 0x000000 - 0x541200 ] Oct 3 10:51:56.481711 ## Flattened Device Tree blob at 43000000 Oct 3 10:51:56.481762 Booting using the fdt blob at 0x43000000 Oct 3 10:51:56.481808 Loading Ramdisk to 4e775000, end 4ffff564 ... OK Oct 3 10:51:56.901671 Loading Device Tree to 4e766000, end 4e77465d ... OK Oct 3 10:51:56.901742 Oct 3 10:51:56.913656 Starting kernel ...(fake run for tracing) Oct 3 10:51:56.913689 Oct 3 10:51:56.913710 Oct 3 10:51:56.925638 Starting kernel ... Oct 3 10:51:56.925669 Oct 3 10:51:56.925690 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 10:52:03.065733 [ 0.000000] Linux version 6.1.0-25-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.106-3 (2024-08-26) Oct 3 10:52:03.077730 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=30c5387d Oct 3 10:52:03.089711 [ 0.000000] CPU: div instructions available: patching division code Oct 3 10:52:03.101731 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 10:52:03.101793 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 10:52:03.113710 [ 0.000000] Memory policy: Data cache writealloc Oct 3 10:52:03.113767 [ 0.000000] efi: UEFI not found. Oct 3 10:52:03.113858 [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000 Oct 3 10:52:03.125683 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 10:52:03.125716 [ 0.000000] Zone ranges: Oct 3 10:52:03.125740 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 10:52:03.137702 [ 0.000000] Normal empty Oct 3 10:52:03.137734 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 10:52:03.149713 [ 0.000000] Movable zone start for each node Oct 3 10:52:03.149769 [ 0.000000] Early memory node ranges Oct 3 10:52:03.149815 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 10:52:03.161736 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 10:52:03.161788 [ 0.000000] percpu: Embedded 18 pages/cpu s44820 r8192 d20716 u73728 Oct 3 10:52:03.173710 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 10:52:03.185710 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=ttySAC2,115200n8 Oct 3 10:52:03.185751 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 10:52:03.197716 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 10:52:03.209715 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 10:52:03.209750 [ 0.000000] Memory: 2015504K/2097152K available (12288K kernel code, 1717K rwdata, 3748K rodata, 2048K init, 383K bss, 65264K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 10:52:03.233713 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 10:52:03.233748 [ 0.000000] ftrace: allocating 39996 entries in 118 pages Oct 3 10:52:03.245710 [ 0.000000] ftrace: allocated 118 pages with 5 groups Oct 3 10:52:03.245743 [ 0.000000] trace event string verifier disabled Oct 3 10:52:03.245769 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 10:52:03.257712 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 10:52:03.257747 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 10:52:03.269707 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 10:52:03.269740 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 10:52:03.281710 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 10:52:03.281745 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 10:52:03.293698 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 10:52:03.293732 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 10:52:03.305797 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 10:52:03.305831 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 10:52:03.317706 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 10:52:03.317745 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 10:52:03.329723 [ 0.000019] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 10:52:03.341714 [ 0.002625] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 10:52:03.341748 [ 0.002639] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 10:52:03.353717 [ 0.002654] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 10:52:03.365718 [ 0.002666] Ignoring duplicate/late registration of read_current_timer delay Oct 3 10:52:03.365772 [ 0.003035] Console: colour dummy device 80x30 Oct 3 10:52:03.377712 [ 0.003077] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 10:52:03.389702 [ 0.003091] CPU: Testing write buffer coherency: ok Oct 3 10:52:03.389735 [ 0.003133] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 10:52:03.401726 [ 0.003141] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 10:52:03.401760 [ 0.003148] pid_max: default: 32768 minimum: 301 Oct 3 10:52:03.413710 [ 0.003518] LSM: Security Framework initializing Oct 3 10:52:03.413761 [ 0.003591] landlock: Up and running. Oct 3 10:52:03.413807 [ 0.003596] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 10:52:03.425749 [ 0.003785] AppArmor: AppArmor initialized Oct 3 10:52:03.425801 [ 0.003797] TOMOYO Linux initialized Oct 3 10:52:03.437716 [ 0.003841] LSM support for eBPF active Oct 3 10:52:03.437783 [ 0.004091] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 10:52:03.437840 [ 0.004104] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 10:52:03.449718 [ 0.005526] /cpus/cpu@0 missing clock-frequency property Oct 3 10:52:03.461714 [ 0.005553] /cpus/cpu@1 missing clock-frequency property Oct 3 10:52:03.461772 [ 0.005566] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 10:52:03.461822 [ 0.006512] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 10:52:03.473719 [ 0.006519] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 10:52:03.485719 [ 0.006623] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 10:52:03.485787 [ 0.006628] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 10:52:03.497708 [ 0.006769] Setting up static identity map for 0x40400000 - 0x404000ac Oct 3 10:52:03.497763 [ 0.007934] rcu: Hierarchical SRCU implementation. Oct 3 10:52:03.509714 [ 0.007940] rcu: Max phase no-delay instances is 1000. Oct 3 10:52:03.509771 [ 0.010073] EFI services will not be available. Oct 3 10:52:03.509819 [ 0.010419] smp: Bringing up secondary CPUs ... Oct 3 10:52:03.521706 [ 0.011158] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 10:52:03.521762 [ 0.011171] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 10:52:03.533716 [ 0.011301] smp: Brought up 1 node, 2 CPUs Oct 3 10:52:03.533778 [ 0.011310] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 10:52:03.545722 [ 0.011317] CPU: All CPU(s) started in HYP mode. Oct 3 10:52:03.545755 [ 0.011321] CPU: Virtualization extensions available. Oct 3 10:52:03.557727 [ 0.012185] devtmpfs: initialized Oct 3 10:52:03.557759 [ 0.023185] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 10:52:03.569752 [ 0.023415] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 10:52:03.569791 [ 0.023438] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 10:52:03.581713 [ 0.024001] pinctrl core: initialized pinctrl subsystem Oct 3 10:52:03.581746 [ 0.024730] DMI not present or invalid. Oct 3 10:52:03.593716 [ 0.025411] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 10:52:03.593751 [ 0.026964] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 10:52:03.605718 [ 0.028486] audit: initializing netlink subsys (disabled) Oct 3 10:52:03.605752 [ 0.028689] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 Oct 3 10:52:03.617716 [ 0.029867] thermal_sys: Registered thermal governor 'fair_share' Oct 3 10:52:03.617750 [ 0.029873] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 10:52:03.629711 [ 0.029878] thermal_sys: Registered thermal governor 'step_wise' Oct 3 10:52:03.629745 [ 0.029883] thermal_sys: Registered thermal governor 'user_space' Oct 3 10:52:03.641711 [ 0.029887] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 10:52:03.641745 [ 0.030085] No ATAGs? Oct 3 10:52:03.653724 [ 0.030151] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 10:52:03.653763 [ 0.030159] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 10:52:03.665715 [ 0.031242] Serial: AMBA PL011 UART driver Oct 3 10:52:03.665747 [ 0.080616] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 10:52:03.677719 [ 0.087565] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 10:52:03.689711 [ 0.091864] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages Oct 3 10:52:03.689747 [ 0.091872] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page Oct 3 10:52:03.701741 [ 0.099026] iommu: Default domain type: Translated Oct 3 10:52:03.701775 [ 0.099034] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 10:52:03.713779 [ 0.100007] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 10:52:03.713814 [ 0.100520] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 10:52:03.713840 [ 0.100532] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 10:52:03.725709 [ 0.101068] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 10:52:03.737718 [ 0.101099] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 10:52:03.737757 [ 0.101323] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 10:52:03.749707 [ 0.101810] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 10:52:03.749740 [ 0.101821] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 10:52:03.761715 [ 0.102199] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 10:52:03.761772 [ 0.102490] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 10:52:03.773714 [ 0.102499] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 10:52:03.773775 [ 0.102813] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 10:52:03.785708 [ 0.102913] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 10:52:03.785763 [ 0.102922] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 10:52:03.785813 [ 0.103102] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 10:52:03.797716 [ 0.103347] pps_core: LinuxPPS API ver. 1 registered Oct 3 10:52:03.797769 [ 0.103353] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 10:52:03.809749 [ 0.103370] PTP clock support registered Oct 3 10:52:03.809811 [ 0.104907] NetLabel: Initializing Oct 3 10:52:03.821706 [ 0.104912] NetLabel: domain hash size = 128 Oct 3 10:52:03.821754 [ 0.104918] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 10:52:03.821804 [ 0.104972] NetLabel: unlabeled traffic allowed by default Oct 3 10:52:03.833709 [ 0.105145] vgaarb: loaded Oct 3 10:52:03.833761 [ 0.105689] clocksource: Switched to clocksource mct-frc Oct 3 10:52:03.845717 [ 0.106257] VFS: Disk quotas dquot_6.6.0 Oct 3 10:52:03.845771 [ 0.106342] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 10:52:03.845823 [ 0.107111] AppArmor: AppArmor Filesystem Enabled Oct 3 10:52:03.857717 [ 0.117007] NET: Registered PF_INET protocol family Oct 3 10:52:03.857778 [ 0.117204] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 10:52:03.869713 [ 0.118845] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 10:52:03.881708 [ 0.118947] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 10:52:03.881769 [ 0.118971] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 10:52:03.893714 [ 0.119072] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 10:52:03.893781 [ 0.119303] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 10:52:03.905720 [ 0.119543] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 10:52:03.917731 [ 0.119636] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 10:52:03.917790 [ 0.119676] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 10:52:03.929710 [ 0.119907] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 10:52:03.929745 [ 0.119945] NET: Registered PF_XDP protocol family Oct 3 10:52:03.941693 [ 0.119956] PCI: CLS 0 bytes, default 64 Oct 3 10:52:03.941744 [ 0.120447] Trying to unpack rootfs image as initramfs... Oct 3 10:52:03.941794 [ 0.120797] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 10:52:03.953709 [ 0.126167] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 10:52:03.965730 [ 0.193801] Initialise system trusted keyrings Oct 3 10:52:03.965800 [ 0.193927] Key type blacklist registered Oct 3 10:52:03.965846 [ 0.195206] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 10:52:03.977715 [ 0.203127] zbud: loaded Oct 3 10:52:03.977770 [ 0.204315] integrity: Platform Keyring initialized Oct 3 10:52:03.989710 [ 0.204347] integrity: Machine keyring initialized Oct 3 10:52:03.989744 [ 0.204356] Key type asymmetric registered Oct 3 10:52:03.989769 [ 0.204364] Asymmetric key parser 'x509' registered Oct 3 10:52:04.001709 [ 1.422203] Freeing initrd memory: 25132K Oct 3 10:52:04.001742 [ 1.444273] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 10:52:04.013709 [ 1.444536] bounce: pool size: 64 pages Oct 3 10:52:04.013741 [ 1.444716] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 10:52:04.013772 [ 1.444875] io scheduler mq-deadline registered Oct 3 10:52:04.025705 [ 1.450066] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 10:52:04.037696 [ 1.471018] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 10:52:04.037734 [ 1.471029] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 10:52:04.049721 [ 1.473320] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 10:52:04.061712 [ 1.473330] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 10:52:04.061752 [ 1.474157] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 10:52:04.073715 [ 1.474165] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 10:52:04.085715 [ 1.475003] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 10:52:04.085753 [ 1.475012] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 10:52:04.097728 [ 1.477327] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 10:52:04.109722 [ 1.480175] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 10:52:04.109757 [ 1.482924] Serial: AMBA driver Oct 3 10:52:04.121704 [ 1.483149] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 10:52:04.121743 [ 1.483623] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 10:52:04.133738 [ 1.484102] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 10:52:04.145721 [ 2.564825] printk: console [ttySAC2] enabled Oct 3 10:52:04.145777 [ 2.569645] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 10:52:04.157706 [ 2.580287] STM32 USART driver initialized Oct 3 10:52:04.157739 [ 2.594726] mousedev: PS/2 mouse device common for all mice Oct 3 10:52:04.181654 [ 2.625997] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 10:52:04.205675 [ 2.634601] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T10:52:05 UTC (1727952725) Oct 3 10:52:04.217707 [ 2.644449] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 10:52:04.229688 [ 2.651916] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 10:52:04.241665 [ 2.659916] NET: Registered PF_INET6 protocol family Oct 3 10:52:04.241720 [ 2.684026] Segment Routing with IPv6 Oct 3 10:52:04.265701 [ 2.686321] In-situ OAM (IOAM) with IPv6 Oct 3 10:52:04.265762 [ 2.690228] mip6: Mobile IPv6 Oct 3 10:52:04.277716 [ 2.693086] NET: Registered PF_PACKET protocol family Oct 3 10:52:04.277774 [ 2.698277] mpls_gso: MPLS GSO support Oct 3 10:52:04.277821 [ 2.702323] ThumbEE CPU extension supported. Oct 3 10:52:04.289711 [ 2.706121] Registering SWP/SWPB emulation handler Oct 3 10:52:04.289765 [ 2.711398] registered taskstats version 1 Oct 3 10:52:04.289830 [ 2.714997] Loading compiled-in X.509 certificates Oct 3 10:52:04.301660 [ 3.175696] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 10:52:04.757766 [ 3.183049] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 10:52:04.769720 [ 3.194199] zswap: loaded using pool lzo/zbud Oct 3 10:52:04.781702 [ 3.198070] Key type .fscrypt registered Oct 3 10:52:04.781755 [ 3.201322] Key type fscrypt-provisioning registered Oct 3 10:52:04.781803 [ 3.225563] Key type encrypted registered Oct 3 10:52:04.805686 [ 3.228157] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 10:52:04.817697 [ 3.233646] ima: No TPM chip found, activating TPM-bypass! Oct 3 10:52:04.817731 [ 3.239092] ima: Allocated hash algorithm: sha256 Oct 3 10:52:04.817757 [ 3.243774] ima: No architecture policies found Oct 3 10:52:04.829712 [ 3.248356] evm: Initialising EVM extended attributes: Oct 3 10:52:04.829745 [ 3.253381] evm: security.selinux Oct 3 10:52:04.841707 [ 3.256681] evm: security.SMACK64 (disabled) Oct 3 10:52:04.841740 [ 3.260925] evm: security.SMACK64EXEC (disabled) Oct 3 10:52:04.841766 [ 3.265528] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 10:52:04.853730 [ 3.270563] evm: security.SMACK64MMAP (disabled) Oct 3 10:52:04.853764 [ 3.275161] evm: security.apparmor Oct 3 10:52:04.853789 [ 3.278545] evm: security.ima Oct 3 10:52:04.865690 [ 3.281480] evm: security.capability Oct 3 10:52:04.865723 [ 3.285062] evm: HMAC attrs: 0x1 Oct 3 10:52:04.865748 [ 3.872659] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 10:52:05.453679 [ 3.878632] clk: Disabling unused clocks Oct 3 10:52:05.465636 [ 3.891492] Freeing unused kernel image (initmem) memory: 2048K Oct 3 10:52:05.477694 [ 3.896358] Checked W+X mappings: passed, no W+X pages found Oct 3 10:52:05.477728 [ 3.901609] Run /init as init process Oct 3 10:52:05.489619 Loading, please wait... Oct 3 10:52:05.513626 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 10:52:05.597629 [ 4.831745] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 10:52:06.413700 [ 4.838907] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 10:52:06.425695 [ 4.846802] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 10:52:06.437646 [ 4.864610] usbcore: registered new interface driver usbfs Oct 3 10:52:06.449686 [ 4.869314] usbcore: registered new interface driver hub Oct 3 10:52:06.449719 [ 4.878296] usbcore: registered new device driver usb Oct 3 10:52:06.461650 [ 4.888538] phy phy-12130000.phy.4: phy_power_on was called before phy_init Oct 3 10:52:06.473662 [ 4.900030] Synopsys Designware Multimedia Card Interface Driver Oct 3 10:52:06.485647 [ 4.912676] phy phy-12130000.phy.4: phy_power_on was called before phy_init Oct 3 10:52:06.497658 [ 4.927205] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 10:52:06.509651 [ 4.927514] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 10:52:06.521699 [ 4.931304] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Oct 3 10:52:06.521737 [ 4.938569] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 10:52:06.533684 [ 4.952989] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Oct 3 10:52:06.533718 [ 4.959989] exynos-ohci 12120000.usb: USB Host Controller Oct 3 10:52:06.545660 [ 4.974709] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 10:52:06.557684 [ 4.979720] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 10:52:06.569668 [ 4.988220] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 10:52:06.569704 [ 4.993252] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 10:52:06.581683 [ 5.003554] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 10:52:06.581757 [ 5.004352] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Oct 3 10:52:06.593733 [ 5.016060] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 10:52:06.605688 [ 5.024043] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 10:52:06.605725 [ 5.031213] usb usb1: Product: EHCI Host Controller Oct 3 10:52:06.617720 [ 5.036059] usb usb1: Manufacturer: Linux 6.1.0-25-armmp-lpae ehci_hcd Oct 3 10:52:06.617767 [ 5.042569] usb usb1: SerialNumber: 12110000.usb Oct 3 10:52:06.629665 [ 5.065496] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo Oct 3 10:52:06.653679 [ 5.066240] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 10:52:06.653712 [ 5.089939] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Oct 3 10:52:06.677692 [ 5.097040] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 109,32 bit host data width,128 deep fifo Oct 3 10:52:06.689612 [ 5.106557] mmc_host mmc0: card is polling. Oct 3 10:52:06.689645 [ 5.153940] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 10:52:06.737709 [ 5.162395] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 10:52:06.749667 [ 5.176629] hub 1-0:1.0: USB hub found Oct 3 10:52:06.761628 [ 5.189351] hub 1-0:1.0: 3 ports detected Oct 3 10:52:06.773632 [ 5.202126] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 10:52:06.785679 [ 5.208992] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 10:52:06.797647 [ 5.216159] usb usb2: Product: USB Host Controller Oct 3 10:52:06.797680 [ 5.220929] usb usb2: Manufacturer: Linux 6.1.0-25-armmp-lpae ohci_hcd Oct 3 10:52:06.809654 [ 5.227479] usb usb2: SerialNumber: 12120000.usb Oct 3 10:52:06.809687 [ 5.237873] hub 2-0:1.0: USB hub found Oct 3 10:52:06.821654 [ 5.246633] hub 2-0:1.0: 3 ports detected Oct 3 10:52:06.833647 [ 5.252333] SCSI subsystem initialized Oct 3 10:52:06.833679 [ 5.287049] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 10:52:06.869688 [ 5.295562] mmc1: new high speed SDHC card at address aaaa Oct 3 10:52:06.881665 [ 5.305090] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 10:52:06.893674 [ 5.305771] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Oct 3 10:52:06.893707 [ 5.328313] mmc0: new DDR MMC card at address 0001 Oct 3 10:52:06.905643 [ 5.344081] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 10:52:06.929690 [ 5.351573] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Oct 3 10:52:06.929732 [ 5.358563] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 10:52:06.941685 [ 5.366176] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 10:52:06.953666 [ 5.372831] mmcblk0: p1 p2 p3 p4 Oct 3 10:52:06.953697 [ 5.381203] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Oct 3 10:52:06.969108 [ 5.386447] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 10:52:06.969195 [ 5.388634] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Oct 3 10:52:06.977754 [ 5.392091] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Oct 3 10:52:06.989805 [ 5.400192] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (241:0) Oct 3 10:52:06.989868 [ 5.405859] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 10:52:07.001771 [ 5.426961] scsi host0: ahci-dwc Oct 3 10:52:07.013782 [ 5.429121] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 110 Oct 3 10:52:07.013853 [ 5.674216] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 10:52:07.265630 [ 5.748405] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 10:52:07.337636 [ 5.856847] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 10:52:07.445585 [ 5.913758] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 10:52:07.505662 [ 5.919378] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 10:52:07.505662 [ 5.925177] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 10:52:07.517608 [ 5.932688] ata1.00: configured for UDMA/133 Oct 3 10:52:07.517608 [ 5.936380] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 10:52:07.529621 [ 5.964809] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 10:52:07.553646 [ 5.990865] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 10:52:07.577664 [ 5.995290] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 10:52:07.589663 [ 6.003156] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 10:52:07.589663 [ 6.011975] xhci-hcd xhci-hcd.2.auto: irq 111, io mem 0x12000000 Oct 3 10:52:07.601669 [ 6.018143] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 10:52:07.601669 [ 6.023385] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 10:52:07.613673 [ 6.031041] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 10:52:07.625665 [ 6.037672] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 10:52:07.625665 [ 6.045769] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 10:52:07.637675 [ 6.052971] usb usb3: Product: xHCI Host Controller Oct 3 10:52:07.637675 [ 6.057836] usb usb3: Manufacturer: Linux 6.1.0-25-armmp-lpae xhci-hcd Oct 3 10:52:07.649654 [ 6.064337] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 10:52:07.649654 [ 6.072140] hub 3-0:1.0: USB hub found Oct 3 10:52:07.661668 [ 6.072814] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 10:52:07.661668 [ 6.074505] hub 3-0:1.0: 1 port detected Oct 3 10:52:07.673773 [ 6.089330] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 10:52:07.673773 [ 6.096227] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 10:52:07.685815 [ 6.104250] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 10:52:07.697791 [ 6.111455] usb usb4: Product: xHCI Host Controller Oct 3 10:52:07.697852 [ 6.116291] usb usb4: Manufacturer: Linux 6.1.0-25-armmp-lpae xhci-hcd Oct 3 10:52:07.709750 [ 6.122808] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 10:52:07.709811 [ 6.128479] hub 4-0:1.0: USB hub found Oct 3 10:52:07.709857 [ 6.131477] hub 4-0:1.0: 1 port detected Oct 3 10:52:07.721750 [ 6.140448] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 10:52:07.733749 [ 6.146596] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 10:52:07.733810 [ 6.155332] sd 0:0:0:0: [sda] Write Protect is off Oct 3 10:52:07.745776 [ 6.158781] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 10:52:07.745850 [ 6.167878] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 10:52:07.757728 [ 6.183825] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 10:52:07.769793 [ 6.191763] sda: sda1 sda2 < sda5 > Oct 3 10:52:07.781758 [ 6.195906] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 10:52:07.781818 [ 6.291831] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 10:52:07.877776 [ 6.399803] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 10:52:07.985853 [ 6.507779] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 10:52:08.093720 [ 6.615793] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 10:52:08.201787 [ 7.024305] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 10:52:08.609787 [ 7.131912] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 10:52:08.717743 [ 7.261717] random: crng init done Oct 3 10:52:08.849685 [ 7.370780] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. Oct 3 10:52:08.969740 [ 7.381611] device-mapper: uevent: version 1.0.3 Oct 3 10:52:08.969803 [ 7.389772] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Oct 3 10:52:08.981713 [ 7.740002] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 10:52:09.329746 Begin: Loading essential drivers ... done. Oct 3 10:52:09.569703 Begin: Running /scripts/init-premount ... done. Oct 3 10:52:12.596847 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 10:52:12.596847 Begin: Running /scripts/local-premount ... done. Oct 3 10:52:12.668774 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 10:52:12.716797 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 10:52:12.825071 /dev/mapper/arndale--westfield--vg-root: clean, 39343/1220608 files, 378289/4882432 blocks Oct 3 10:52:13.029089 done. Oct 3 10:52:13.040991 [ 11.585415] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 10:52:13.172878 [ 11.784443] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 10:52:13.376849 done. Oct 3 10:52:13.376849 Begin: Running /scripts/local-bottom ... done. Oct 3 10:52:13.424870 Begin: Running /scripts/init-bottom ... done. Oct 3 10:52:13.464822 [ 12.092896] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. Oct 3 10:52:13.680854 INIT: version 3.06 booting Oct 3 10:52:14.016781 INIT: No inittab.d directory found Oct 3 10:52:14.088845 Using makefile-style concurrent boot in runlevel S. Oct 3 10:52:14.365755 Starting hotplug events dispatcher: systemd-udevd. Oct 3 10:52:15.829790 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 10:52:16.069751 Synthesizing the initial hotplug events (devices)...done. Oct 3 10:52:16.585759 Waiting for /dev to be fully populated...[ 15.165208] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Oct 3 10:52:16.753689 [ 15.186437] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 10:52:16.777717 [ 15.361527] sd 0:0:0:0: Attached scsi generic sg0 type 0 Oct 3 10:52:16.945754 [ 15.395493] panfrost 11800000.gpu: clock rate = 533000000 Oct 3 10:52:16.981688 [ 15.426636] panfrost 11800000.gpu: mali-t600 id 0x600 major 0x0 minor 0x0 status 0x1 Oct 3 10:52:17.017746 [ 15.432954] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,31b4dfff Oct 3 10:52:17.017816 [ 15.441089] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 Oct 3 10:52:17.029784 [ 15.452799] panfrost 11800000.gpu: shader_present=0xf l2_present=0x1 Oct 3 10:52:17.041712 [ 15.492327] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 10:52:17.077757 [ 15.562441] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 10:52:17.149733 [ 15.598485] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 0 Oct 3 10:52:17.185727 [ 15.613728] usb3503 usb-hub: switched to HUB mode Oct 3 10:52:17.197739 [ 15.616961] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 10:52:17.197841 [ 15.672976] blk_print_req_error: 6 callbacks suppressed Oct 3 10:52:17.257779 [ 15.672986] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 10:52:17.269699 [ 15.786307] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 10:52:17.377714 [ 15.894583] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 10:52:17.485685 [ 15.942658] usb 1-3: new high-speed USB device number 2 using exynos-ehci Oct 3 10:52:17.521754 [ 16.002777] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 10:52:17.593750 [ 16.106561] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Oct 3 10:52:17.689776 [ 16.113539] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 3 10:52:17.702628 [ 16.124259] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 10:52:17.713735 [ 16.149632] hub 1-3:1.0: USB hub found Oct 3 10:52:17.737652 [ 16.152202] hub 1-3:1.0: 3 ports detected Oct 3 10:52:17.737684 [ 16.232421] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 10:52:17.821668 [ 16.341816] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 10:52:17.929810 [ 16.386603] OF: graph: no port node found in /soc/hdmi@14530000 Oct 3 10:52:17.977685 [ 16.441743] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 10:52:18.025700 [ 16.450153] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 10:52:18.037723 [ 16.579288] usb 1-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=77.32 Oct 3 10:52:18.169778 [ 16.586454] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Oct 3 10:52:18.181741 [ 16.593917] usb 1-3.2: Product: USB2.0 Hub Oct 3 10:52:18.181948 [ 16.608186] hub 1-3.2:1.0: USB hub found Oct 3 10:52:18.193744 [ 16.611523] hub 1-3.2:1.0: 4 ports detected Oct 3 10:52:18.193804 [ 16.877942] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 10:52:18.473685 [ 16.906000] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 10:52:18.497627 [ 16.985857] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 10:52:18.581582 [ 17.035038] usb 1-3.2.4: New USB device found, idVendor=0b95, idProduct=772a, bcdDevice= 0.01 Oct 3 10:52:18.629698 [ 17.042129] usb 1-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Oct 3 10:52:18.629698 [ 17.049642] usb 1-3.2.4: Product: AX88772 Oct 3 10:52:18.641657 [ 17.053670] usb 1-3.2.4: Manufacturer: ASIX Elec. Corp. Oct 3 10:52:18.641657 [ 17.058868] usb 1-3.2.4: SerialNumber: 000001 Oct 3 10:52:18.641657 [ 17.547084] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 10:52:19.133655 [ 17.594870] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 10:52:19.181651 [ 18.216358] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 10:52:19.805648 [ 18.231923] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Oct 3 10:52:19.817635 [ 18.243752] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 96:ed:b1:27:17:64 Oct 3 10:52:19.841697 [ 18.262031] usbcore: registered new interface driver asix Oct 3 10:52:19.853711 done. Oct 3 10:52:20.093707 [ 18.999706] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 10:52:20.585682 Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). Oct 3 10:52:20.633717 Checking file systems.../dev/sda1: clean, 922/61056 files, 25402/243968 blocks Oct 3 10:52:22.397744 done. Oct 3 10:52:22.433698 Cleaning up temporary files... /tmp. Oct 3 10:52:22.697754 [ 21.390786] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 10:52:22.973775 [ 21.439825] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 10:52:23.033687 [ 21.637613] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k FS Oct 3 10:52:23.225767 Mounting local filesystems...done. Oct 3 10:52:23.537704 Activating swapfile swap, if any...done. Oct 3 10:52:23.537762 Cleaning up temporary files.... Oct 3 10:52:23.597701 Starting Setting kernel variables: sysctl. Oct 3 10:52:23.741734 [ 22.817078] audit: type=1400 audit(1727952745.700:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=902 comm="apparmor_parser" Oct 3 10:52:24.413788 [ 22.831696] audit: type=1400 audit(1727952745.700:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=903 comm="apparmor_parser" Oct 3 10:52:24.425788 [ 22.845910] audit: type=1400 audit(1727952745.700:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=903 comm="apparmor_parser" Oct 3 10:52:24.449711 [ 22.893914] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 10:52:24.485726 [ 23.196932] audit: type=1400 audit(1727952746.080:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=940 comm="apparmor_parser" Oct 3 10:52:24.797720 [ 23.210541] audit: type=1400 audit(1727952746.084:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=940 comm="apparmor_parser" Oct 3 10:52:24.809804 [ 23.225409] audit: type=1400 audit(1727952746.088:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=940 comm="apparmor_parser" Oct 3 10:52:24.821772 [ 23.558188] audit: type=1400 audit(1727952746.444:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=939 comm="apparmor_parser" Oct 3 10:52:25.157696 [ 23.586880] audit: type=1400 audit(1727952746.464:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=939 comm="apparmor_parser" Oct 3 10:52:25.181779 [ 23.602757] audit: type=1400 audit(1727952746.464:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=939 comm="apparmor_parser" Oct 3 10:52:25.205787 [ 23.620255] audit: type=1400 audit(1727952746.468:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=945 comm="apparmor_parser" Oct 3 10:52:25.217790 Starting: AppArmorLoading AppArmor profiles...done. Oct 3 10:52:25.217848 . Oct 3 10:52:25.217887 [ 25.076036] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 10:52:26.661807 [ 25.078463] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 3 10:52:26.673726 Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1 Oct 3 10:52:28.509791 Copyright 2004-2022 Internet Systems Consortium. Oct 3 10:52:28.509865 All rights reserved. Oct 3 10:52:28.509908 For info, please visit https://www.isc.org/software/dhcp/ Oct 3 10:52:28.521761 Oct 3 10:52:28.521812 Listening on LPF/eth0/a6:46:13:77:e8:2f Oct 3 10:52:28.521858 Sending on LPF/eth0/a6:46:13:77:e8:2f Oct 3 10:52:28.521902 Sending on Socket/fallback Oct 3 10:52:28.533732 Created duid "\000\001\000\001.\2213\351\246F\023w\350/". Oct 3 10:52:28.533794 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 Oct 3 10:52:28.533844 [ 28.385069] exynos4-fb 14400000.fimd: deferred probe timeout, ignoring dependency Oct 3 10:52:29.973792 [ 28.397259] exynos-mixer 14450000.mixer: deferred probe timeout, ignoring dependency Oct 3 10:52:29.985795 [ 28.405117] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations Oct 3 10:52:29.997769 [ 28.411563] exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm]) Oct 3 10:52:29.997837 [ 28.422483] exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm]) Oct 3 10:52:30.009740 [ 28.432458] exynos-drm exynos-drm: bound 14500000.dsi (ops hdmi_enable [exynosdrm]) Oct 3 10:52:30.021725 [ 28.444407] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm]) Oct 3 10:52:30.033714 [ 28.462815] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 10:52:30.045737 [ 28.468092] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 10:52:30.057747 [ 28.476392] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 Oct 3 10:52:30.069676 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 Oct 3 10:52:30.657752 DHCPOFFER of 10.149.64.45 from 10.149.64.4 Oct 3 10:52:30.657821 DHCPREQUEST for 10.149.64.45 on eth0 to 255.255.255.255 port 67 Oct 3 10:52:30.657913 DHCPACK of 10.149.64.45 from 10.149.64.4 Oct 3 10:52:30.669675 bound to 10.149.64.45 -- renewal in 227 seconds. Oct 3 10:52:30.669708 done. Oct 3 10:52:30.669730 Cleaning up temporary files.... Oct 3 10:52:30.717787 Starting nftables: none Oct 3 10:52:30.813597 . Oct 3 10:52:31.233738 INIT: Entering runlevel: 2 Oct 3 10:52:31.293761 Using makefile-style concurrent boot in runlevel 2. Oct 3 10:52:31.341732 Starting Apache httpd web server: apache2. Oct 3 10:52:33.376813 Starting NTP server: ntpd2024-10-03T10:52:35 ntpd[1134]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 10:52:33.737063 2024-10-03T10:52:35 ntpd[1134]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 10:52:33.750729 . Oct 3 10:52:33.750817 Starting periodic command scheduler: cron. Oct 3 10:52:33.760779 Starting system message bus: dbus. Oct 3 10:52:33.856788 Starting OpenBSD Secure Shell server: sshd. Oct 3 10:52:34.601758 Oct 3 10:52:35.681772 Debian GNU/Linux 12 arndale-westfield ttySAC2 Oct 3 10:52:35.681857 Oct 3 10:52:35.681897 arndale-westfield login: INIT: Switching to r INIT: No inittab.d directorUsing makefile-style concurrent boot in runlevel 6. Oct 3 10:58:05.397856 Stopping libvirt management daemon: libvirtdNo /usr/local/sbin/libvirtd found running; none killed. Oct 3 10:58:05.457783 . Oct 3 10:58:05.457812 Stopping hotplug events dispatcher: systemd-udevd. Oct 3 10:58:05.469824 Stopping SMP IRQ Balancer: irqbalance. Oct 3 10:58:05.469856 Stopping nftables: none. Oct 3 10:58:05.493778 Saving the system clock to /dev/rtc0. Oct 3 10:58:05.841778 Hardware Clock updated to Thu Oct 3 10:58:07 UTC 2024. Oct 3 10:58:05.841812 Stopping Apache httpd web server: apache2. Oct 3 10:58:06.637656 Asking all remaining processes to terminate...done. Oct 3 10:58:06.961785 All processes ended within 1 seconds...done. Oct 3 10:58:06.961854 Deconfiguring network interfaces...ifdown: ignoring unknown interface eth0=eth0 Oct 3 10:58:07.105734 done. Oct 3 10:58:07.105787 [ 365.723353] EXT4-fs (sda1): unmounting filesystem. Oct 3 10:58:07.309716 Deactivating swap...done. Oct 3 10:58:07.369735 Unmounting local filesystems...done. Oct 3 10:58:07.369795 [ 366.060818] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 10:58:07.645754 Will now restart. Oct 3 10:58:07.981715 [ 366.431771] asix 1-3.2.4:1.0 eth0: Link is Down Oct 3 10:58:08.017747 [ 366.502663] sd 0:0:0:0: [sda] Synchronizing SCSI cache Oct 3 10:58:08.089762 [ 366.510363] wake enabled for irq 101 (gpx1-4) Oct 3 10:58:08.089825 [ 366.513253] wake enabled for irq 102 (gpx1-5) Oct 3 10:58:08.101748 [ 366.517614] wake enabled for irq 103 (gpx1-6) Oct 3 10:58:08.101809 [ 366.521949] wake enabled for irq 104 (gpx1-7) Oct 3 10:58:08.101858 [ 366.526289] wake enabled for irq 105 (gpx2-0) Oct 3 10:58:08.113758 [ 366.530627] wake enabled for irq 106 (gpx2-1) Oct 3 10:58:08.113856 [ 366.535455] reboot: Reű Oct 3 10:58:08.449740 Oct 3 10:58:08.449792 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 10:58:08.461798 Oct 3 10:58:08.461850 CPU: Exynos5250@1000MHz Oct 3 10:58:08.461894 Oct 3 10:58:08.461932 Board: Arndale Oct 3 10:58:08.461972 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 10:58:08.462019 ready Oct 3 10:58:08.462057 DRAM: 2 GiB Oct 3 10:58:08.473694 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 10:58:08.485742 trace: enabled Oct 3 10:58:08.521744 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 10:58:08.881740 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 10:58:08.941784 In: serial Oct 3 10:58:08.941839 Out: serial Oct 3 10:58:08.941880 Err: serial Oct 3 10:58:08.941920 SCSI: ARNDALE SCSI INIT Oct 3 10:58:08.941962 Target spinup took 0 ms. Oct 3 10:58:08.953691 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 10:58:08.953691 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 10:58:08.965771 Net: Net Initialization Skipped Oct 3 10:58:08.965833 No ethernet found. Oct 3 10:58:08.965876 Hostname: arndale-westfield Oct 3 10:58:08.965918 Hit any key to stop autoboot: 2  1  0 Oct 3 10:58:10.885704 (Re)start USB... Oct 3 10:58:10.897694 USB0: USB EHCI 1.00 Oct 3 10:58:10.897749 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 10:58:16.489700 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 10:58:16.501680 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 10:58:16.937700 Waiting for Ethernet connection... done. Oct 3 10:58:18.593728 BOOTP broadcast 1 Oct 3 10:58:18.593801 BOOTP broadcast 2 Oct 3 10:58:20.345736 DHCP client bound to address 10.149.64.45 (1826 ms) Oct 3 10:58:20.345809 Using asx0 device Oct 3 10:58:20.357766 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 10:58:20.357829 Filename 'pxelinux.0'. Oct 3 10:58:20.357873 Load address: 0x43e00000 Oct 3 10:58:20.357915 Loading: *### Oct 3 10:58:20.381753 2.4 MiB/s Oct 3 10:58:20.381809 done Oct 3 10:58:20.381849 Bytes transferred = 42430 (a5be hex) Oct 3 10:58:20.381894 missing environment variable: pxeuuid Oct 3 10:58:20.381939 Retrieving file: pxelinux.cfg/0A95402D Oct 3 10:58:20.393755 Using asx0 device Oct 3 10:58:20.393810 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 10:58:20.393861 Filename 'pxelinux.cfg/0A95402D'. Oct 3 10:58:20.405710 Load address: 0x51000000 Oct 3 10:58:20.405741 Loading: *# Oct 3 10:58:20.405764 31.3 KiB/s Oct 3 10:58:20.405786 done Oct 3 10:58:20.405807 Bytes transferred = 65 (41 hex) Oct 3 10:58:20.405831 Config file found Oct 3 10:58:20.405853 Ignoring unknown command: serial Oct 3 10:58:20.417750 1: local Oct 3 10:58:20.417804 scanning bus for devices... Oct 3 10:58:20.417849 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 10:58:20.441755 Type: Hard Disk Oct 3 10:58:20.441812 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 10:58:20.453742 Found 1 device(s). Oct 3 10:58:20.453798 Oct 3 10:58:20.453836 SCSI device 0: Oct 3 10:58:20.453876 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 10:58:20.453926 Type: Hard Disk Oct 3 10:58:20.453968 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 10:58:20.465756 ... is now current device Oct 3 10:58:20.465812 Scanning scsi 0... Oct 3 10:58:20.465854 Found U-Boot script /boot.scr Oct 3 10:58:20.645710 1742 bytes read in 36 ms (46.9 KiB/s) Oct 3 10:58:20.693714 ## Executing script at 50000000 Oct 3 10:58:20.693771 Loading dtbs/6.1.112+/exynos5250-arndale.dtb Oct 3 10:58:20.693818 46686 bytes read in 2345 ms (18.6 KiB/s) Oct 3 10:58:22.961741 1015824 bytes read in 108 ms (9 MiB/s) Oct 3 10:58:23.093759 Loaded xen-4.20-unstable to 0x41000000 (f8010) Oct 3 10:58:23.093850 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan Oct 3 10:58:23.105782 10039808 bytes read in 421 ms (22.7 MiB/s) Oct 3 10:58:23.537752 Loaded vmlinuz-6.1.112+ to 0x42000000 (993200) Oct 3 10:58:23.549778 command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 10:58:23.561762 12059121 bytes read in 518 ms (22.2 MiB/s) Oct 3 10:58:24.077611 Loaded initrd.img-6.1.112+ to 0x43300000 (b801f1) Oct 3 10:58:24.089606 chosen { Oct 3 10:58:24.089633 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan"; Oct 3 10:58:24.101624 #size-cells = <0x00000001>; Oct 3 10:58:24.101652 #address-cells = <0x00000001>; Oct 3 10:58:24.101676 stdout-path = "serial2:115200n8"; Oct 3 10:58:24.101701 module@1 { Oct 3 10:58:24.101722 reg = <0x43300000 0x00b801f1>; Oct 3 10:58:24.113733 compatible = "xen,linux-initrd", "xen,multiboot-module"; Oct 3 10:58:24.113791 }; Oct 3 10:58:24.113830 module@0 { Oct 3 10:58:24.113870 bootargs = "ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Oct 3 10:58:24.137625 reg = <0x42000000 0x00993200>; Oct 3 10:58:24.137654 compatible = "xen,linux-zimage", "xen,multiboot-module"; Oct 3 10:58:24.137681 }; Oct 3 10:58:24.137702 }; Oct 3 10:58:24.137722 Booting 0x41000000 - 0x43000000 Oct 3 10:58:24.149645 Kernel image @ 0x41000000 [ 0x000000 - 0x135000 ] Oct 3 10:58:24.149675 ## Flattened Device Tree blob at 43000000 Oct 3 10:58:24.149700 Booting using the fdt blob at 0x43000000 Oct 3 10:58:24.161625 reserving fdt memory region: addr=43000000 size=c000 Oct 3 10:58:24.161656 Loading Device Tree to 4fff1000, end 4fffffff ... OK Oct 3 10:58:24.161682 Oct 3 10:58:24.173554 Starting kernel ...(fake run for tracing) Oct 3 10:58:24.173584 Oct 3 10:58:24.173605 Oct 3 10:58:24.173625 Starting kernel ... Oct 3 10:58:24.173648 Oct 3 10:58:24.173668 __ __ _ _ ____ ___ _ _ _ Oct 3 10:58:24.233694 \ \/ /___ _ __ | || | |___ \ / _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Oct 3 10:58:24.233755 \ // _ \ '_ \ | || |_ __) | | | |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Oct 3 10:58:24.245686 / \ __/ | | | |__ _| / __/| |_| |__| |_| | | | \__ \ || (_| | |_) | | __/ Oct 3 10:58:24.245742 /_/\_\___|_| |_| |_|(_)_____|\___/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Oct 3 10:58:24.257687 Oct 3 10:58:24.257732 (XEN) Xen version 4.20-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Thu Oct 3 06:56:52 UTC 2024 Oct 3 10:58:24.269711 (XEN) Latest ChangeSet: Wed Oct 2 08:59:03 2024 +0200 git:b102c9f1ce-dirty Oct 3 10:58:24.281682 (XEN) build-id: e73a1b6ffca96a2992bcd54cd20b38719f25bfa3 Oct 3 10:58:24.281737 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Oct 3 10:58:24.293678 (XEN) 32-bit Execution: Oct 3 10:58:24.293727 (XEN) Processor Features: 00001031:00011011 Oct 3 10:58:24.293773 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Oct 3 10:58:24.293821 (XEN) Extensions: GenericTimer Security Oct 3 10:58:24.305689 (XEN) Debug Features: 02010555 Oct 3 10:58:24.305739 (XEN) Auxiliary Features: 00000000 Oct 3 10:58:24.305783 (XEN) Memory Model Features: 10201105 20000000 Oct 3 10:58:24.317681 (XEN) 01240000 02102211 Oct 3 10:58:24.317732 (XEN) ISA Features: 02101110 13112111 21232041 Oct 3 10:58:24.317778 (XEN) 11112131 10011142 00000000 Oct 3 10:58:24.329684 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Oct 3 10:58:24.341702 (XEN) Set SYSRAM to 0000000041000070 (00200070) Oct 3 10:58:24.341756 (XEN) SMP: Allowing 2 CPUs Oct 3 10:58:24.341798 (XEN) enabled workaround for: ARM erratum 766422 Oct 3 10:58:24.353701 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Oct 3 10:58:24.353756 (XEN) GICv2 initialization: Oct 3 10:58:24.353799 (XEN) gic_dist_addr=0000000010481000 Oct 3 10:58:24.365699 (XEN) gic_cpu_addr=0000000010482000 Oct 3 10:58:24.365751 (XEN) gic_hyp_addr=0000000010484000 Oct 3 10:58:24.365795 (XEN) gic_vcpu_addr=0000000010486000 Oct 3 10:58:24.377752 (XEN) gic_maintenance_irq=25 Oct 3 10:58:24.377810 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Oct 3 10:58:24.377858 (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2) Oct 3 10:58:24.389763 (XEN) Initializing Credit2 scheduler Oct 3 10:58:24.389820 (XEN) load_precision_shift: 18 Oct 3 10:58:24.389866 (XEN) load_window_shift: 30 Oct 3 10:58:24.389908 (XEN) underload_balance_tolerance: 0 Oct 3 10:58:24.401750 (XEN) overload_balance_tolerance: -3 Oct 3 10:58:24.401807 (XEN) runqueues arrangement: socket Oct 3 10:58:24.401852 (XEN) cap enforcement granularity: 10ms Oct 3 10:58:24.413785 (XEN) load tracking window length 1073741824 ns Oct 3 10:58:24.413846 (XEN) Allocated console ring of 16 KiB. Oct 3 10:58:24.413892 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Oct 3 10:58:24.425745 (XEN) CPU0: Guest atomics will try 1 times before pausing the domain Oct 3 10:58:24.425808 (XEN) Bringing up CPU1 Oct 3 10:58:24.425851 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Oct 3 10:58:24.437771 (XEN) Brought up 2 CPUs Oct 3 10:58:24.437827 (XEN) CPU 1 booted. Oct 3 10:58:24.437868 (XEN) I/O virtualisation disabled Oct 3 10:58:24.449812 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Oct 3 10:58:24.449874 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Oct 3 10:58:24.449923 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Oct 3 10:58:24.461775 (XEN) Initializing Credit2 scheduler Oct 3 10:58:24.461834 (XEN) load_precision_shift: 18 Oct 3 10:58:24.461878 (XEN) load_window_shift: 30 Oct 3 10:58:24.461920 (XEN) underload_balance_tolerance: 0 Oct 3 10:58:24.473861 (XEN) overload_balance_tolerance: -3 Oct 3 10:58:24.473919 (XEN) runqueues arrangement: socket Oct 3 10:58:24.473965 (XEN) cap enforcement granularity: 10ms Oct 3 10:58:24.485747 (XEN) load tracking window length 1073741824 ns Oct 3 10:58:24.485807 (XEN) Adding cpu 0 to runqueue 0 Oct 3 10:58:24.485851 (XEN) First cpu on runqueue, activating Oct 3 10:58:24.497748 (XEN) Adding cpu 1 to runqueue 0 Oct 3 10:58:24.497806 (XEN) alternatives: Patching with alt table 002c31f0 -> 002c32c8 Oct 3 10:58:24.497856 (XEN) CPU0 will execute ICIALLU on guest exit Oct 3 10:58:24.509746 (XEN) CPU1 will execute ICIALLU on guest exit Oct 3 10:58:24.509805 (XEN) *** LOADING DOMAIN 0 *** Oct 3 10:58:24.509849 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Oct 3 10:58:24.521765 (XEN) Loading ramdisk from boot module @ 0000000043300000 Oct 3 10:58:24.521827 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Oct 3 10:58:24.521876 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Oct 3 10:58:25.085719 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Oct 3 10:58:25.085781 (XEN) Allocating PPI 16 for event channel interrupt Oct 3 10:58:25.121800 (XEN) d0: extended regions not supported for 32-bit guests Oct 3 10:58:25.121863 (XEN) Loading zImage from 0000000042000000 to 0000000067600000-0000000067f93200 Oct 3 10:58:25.133683 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d801f1 Oct 3 10:58:25.217727 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b4c2 Oct 3 10:58:25.313715 (XEN) Initial low memory virq threshold set at 0x4000 pages. Oct 3 10:58:25.325780 (XEN) Scrubbing Free RAM in background Oct 3 10:58:25.325856 (XEN) Std. Loglevel: All Oct 3 10:58:25.325902 (XEN) Guest Loglevel: All Oct 3 10:58:25.337739 (XEN) *************************************************** Oct 3 10:58:25.337798 (XEN) WARNING: SILO mode is not enabled. Oct 3 10:58:25.337844 (XEN) It has implications on the security of the system, Oct 3 10:58:25.349753 (XEN) unless the communications have been forbidden between Oct 3 10:58:25.349814 (XEN) untrusted domains. Oct 3 10:58:25.349857 (XEN) *************************************************** Oct 3 10:58:25.361668 (XEN) 3... 2... 1... Oct 3 10:58:28.361708 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 10:58:28.373710 (XEN) Freed 384kB init memory. Oct 3 10:58:28.373767 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 10:58:29.429734 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Oct 3 10:58:29.453760 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Oct 3 10:58:29.453830 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Oct 3 10:58:29.465792 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Oct 3 10:58:29.465856 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 10:58:29.477685 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 10:58:29.513796 [ 0.000000] Linux version 6.1.112+ (osstest@himrod0) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Thu Oct 3 04:34:49 UTC 2024 Oct 3 10:58:29.525828 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 10:58:29.537818 [ 0.000000] CPU: div instructions available: patching division code Oct 3 10:58:29.537881 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 10:58:29.549838 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 10:58:29.561829 [ 0.000000] Memory policy: Data cache writealloc Oct 3 10:58:29.561889 [ 0.000000] Xen 4.20 support found Oct 3 10:58:29.561934 [ 0.000000] efi: UEFI not found. Oct 3 10:58:29.573785 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 Oct 3 10:58:29.573845 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 10:58:29.573891 [ 0.000000] Zone ranges: Oct 3 10:58:29.585824 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Oct 3 10:58:29.585887 [ 0.000000] Normal empty Oct 3 10:58:29.585931 [ 0.000000] HighMem empty Oct 3 10:58:29.597812 [ 0.000000] Movable zone start for each node Oct 3 10:58:29.597873 [ 0.000000] Early memory node ranges Oct 3 10:58:29.597918 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Oct 3 10:58:29.609823 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Oct 3 10:58:29.609887 [ 0.000000] psci: probing for conduit method from DT. Oct 3 10:58:29.621824 [ 0.000000] psci: PSCIv1.1 detected in firmware. Oct 3 10:58:29.621885 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Oct 3 10:58:29.633802 [ 0.000000] psci: Trusted OS migration not required Oct 3 10:58:29.633863 [ 0.000000] psci: SMC Calling Convention v1.2 Oct 3 10:58:29.633910 [ 0.000000] percpu: Embedded 16 pages/cpu s35412 r8192 d21932 u65536 Oct 3 10:58:29.645831 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 Oct 3 10:58:29.657830 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 10:58:29.669825 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 10:58:29.681821 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Oct 3 10:58:29.681890 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Oct 3 10:58:29.693818 [ 0.000000] Memory: 416844K/524288K available (14336K kernel code, 2180K rwdata, 5604K rodata, 2048K init, 438K bss, 41908K reserved, 65536K cma-reserved, 0K highmem) Oct 3 10:58:29.705865 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 10:58:29.717821 [ 0.000000] trace event string verifier disabled Oct 3 10:58:29.717882 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 10:58:29.717929 [ 0.000000] rcu: RCU event tracing is enabled. Oct 3 10:58:29.729821 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Oct 3 10:58:29.729886 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Oct 3 10:58:29.741826 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 10:58:29.753810 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 10:58:29.753873 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 10:58:29.765806 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 10:58:29.765870 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Oct 3 10:58:29.777822 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 10:58:29.789790 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 10:58:29.789861 [ 0.000012] Switching to timer-based delay loop, resolution 41ns Oct 3 10:58:29.801825 [ 0.000500] Console: colour dummy device 80x30 Oct 3 10:58:29.801886 [ 0.293145] printk: console [hvc0] enabled Oct 3 10:58:29.813803 [ 0.297336] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Oct 3 10:58:29.813881 [ 0.307737] CPU: Testing write buffer coherency: ok Oct 3 10:58:29.825821 [ 0.312679] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 10:58:29.837810 [ 0.322233] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 10:58:29.837875 [ 0.328646] pid_max: default: 32768 minimum: 301 Oct 3 10:58:29.849769 [ 0.333440] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 10:58:29.849841 [ 0.340714] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 10:58:29.861829 [ 0.349126] /cpus/cpu@0 missing clock-frequency property Oct 3 10:58:29.861890 [ 0.353917] /cpus/cpu@1 missing clock-frequency property Oct 3 10:58:29.873814 [ 0.359309] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 10:58:29.873877 [ 0.365823] xen:grant_table: Grant tables using version 1 layout Oct 3 10:58:29.885806 [ 0.371186] Grant table initialized Oct 3 10:58:29.885865 [ 0.374700] xen:events: Using FIFO-based ABI Oct 3 10:58:29.885912 [ 0.379018] Xen: initializing cpu0 Oct 3 10:58:29.897789 [ 0.382547] Setting up static identity map for 0x60300000 - 0x603000ac Oct 3 10:58:29.897853 [ 0.390275] rcu: Hierarchical SRCU implementation. Oct 3 10:58:29.909811 [ 0.393934] rcu: Max phase no-delay instances is 1000. Oct 3 10:58:29.909874 [ 0.402005] EFI services will not be available. Oct 3 10:58:29.909922 [ 0.405306] smp: Bringing up secondary CPUs ... Oct 3 10:58:29.921752 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 10:58:29.993827 [ 0.479712] Xen: initializing cpu1 Oct 3 10:58:29.993886 [ 0.479867] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 10:58:29.993936 [ 0.479895] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 10:58:30.005847 [ 0.498768] smp: Brought up 1 node, 2 CPUs Oct 3 10:58:30.017808 [ 0.502542] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 10:58:30.017872 [ 0.508852] CPU: All CPU(s) started in SVC mode. Oct 3 10:58:30.029752 [ 0.514253] devtmpfs: initialized Oct 3 10:58:30.029812 [ 0.526887] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 10:58:30.041851 [ 0.533378] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Oct 3 10:58:30.053831 [ 0.543102] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 10:58:30.065812 [ 0.551112] pinctrl core: initialized pinctrl subsystem Oct 3 10:58:30.065875 [ 0.557657] DMI not present or invalid. Oct 3 10:58:30.065921 [ 0.560761] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 10:58:30.077828 [ 0.567943] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 10:58:30.089794 [ 0.576722] thermal_sys: Registered thermal governor 'step_wise' Oct 3 10:58:30.089860 [ 0.576852] software IO TLB: area num 2. Oct 3 10:58:30.101810 [ 0.585530] software IO TLB: only able to allocate 8 MB Oct 3 10:58:30.101874 [ 0.592621] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Oct 3 10:58:30.113797 [ 0.597800] No ATAGs? Oct 3 10:58:30.113854 [ 0.600151] hw-breakpoint: Failed to enable monitor mode on CPU 0. Oct 3 10:58:30.113905 [ 0.608674] Serial: AMBA PL011 UART driver Oct 3 10:58:30.125763 [ 0.630822] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 62 Oct 3 10:58:30.149774 [ 0.680269] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 10:58:30.197790 [ 0.705829] xen:balloon: Initialising balloon driver Oct 3 10:58:30.221812 [ 0.713370] iommu: Default domain type: Translated Oct 3 10:58:30.221873 [ 0.716868] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 10:58:30.233831 [ 0.723819] SCSI subsystem initialized Oct 3 10:58:30.233891 [ 0.727378] usbcore: registered new interface driver usbfs Oct 3 10:58:30.245815 [ 0.732613] usbcore: registered new interface driver hub Oct 3 10:58:30.245877 [ 0.738007] usbcore: registered new device driver usb Oct 3 10:58:30.257819 [ 0.744646] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 10:58:30.257881 [ 0.748258] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 10:58:30.269810 [ 0.754560] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 10:58:30.269882 [ 0.763002] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 10:58:30.281826 [ 0.772143] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 10:58:30.293816 [ 0.777654] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 10:58:30.293879 [ 0.782347] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 10:58:30.293929 [ 0.788618] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 10:58:30.305806 [ 0.793826] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 10:58:30.305867 [ 0.798597] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 10:58:30.317818 [ 0.804720] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 10:58:30.317879 [ 0.809911] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 10:58:30.329829 [ 0.814808] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 10:58:30.329892 [ 0.820840] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 10:58:30.341767 [ 0.826610] pps_core: LinuxPPS API ver. 1 registered Oct 3 10:58:30.341830 [ 0.831051] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 10:58:30.353718 [ 0.840251] PTP clock support registered Oct 3 10:58:30.353776 [ 0.852391] EDAC MC: Ver: 3.0.0 Oct 3 10:58:30.365692 [ 0.862327] vgaarb: loaded Oct 3 10:58:30.377734 [ 0.867933] clocksource: Switched to clocksource arch_sys_counter Oct 3 10:58:30.377797 [ 0.879407] NET: Registered PF_INET protocol family Oct 3 10:58:30.389742 [ 0.883045] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Oct 3 10:58:30.401761 [ 0.890951] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 10:58:30.413759 [ 0.898645] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 10:58:30.413830 [ 0.906436] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Oct 3 10:58:30.425758 [ 0.914287] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Oct 3 10:58:30.437748 [ 0.921575] TCP: Hash tables configured (established 4096 bind 4096) Oct 3 10:58:30.437813 [ 0.927940] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 10:58:30.449751 [ 0.934481] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 10:58:30.449817 [ 0.941624] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 10:58:30.461733 [ 0.950554] RPC: Registered named UNIX socket transport module. Oct 3 10:58:30.461796 [ 0.955100] RPC: Registered udp transport module. Oct 3 10:58:30.473737 [ 0.959890] RPC: Registered tcp transport module. Oct 3 10:58:30.473798 [ 0.964647] RPC: Registered tcp NFSv4.1 backchannel transport module. Oct 3 10:58:30.485736 [ 0.971174] PCI: CLS 0 bytes, default 64 Oct 3 10:58:30.485796 [ 0.976466] Initialise system trusted keyrings Oct 3 10:58:30.485844 [ 0.979817] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Oct 3 10:58:30.497770 [ 0.991336] squashfs: version 4.0 (2009/01/31) Phillip Lougher Oct 3 10:58:30.509767 [ 0.996325] NFS: Registering the id_resolver key type Oct 3 10:58:30.509829 [ 1.000981] Key type id_resolver registered Oct 3 10:58:30.509875 [ 1.002516] Trying to unpack rootfs image as initramfs... Oct 3 10:58:30.521766 [ 1.005174] Key type id_legacy registered Oct 3 10:58:30.521826 [ 1.014821] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Oct 3 10:58:30.533741 [ 1.021508] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Oct 3 10:58:30.533809 [ 1.068628] Key type asymmetric registered Oct 3 10:58:30.581756 [ 1.071363] Asymmetric key parser 'x509' registered Oct 3 10:58:30.581817 [ 1.076427] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 10:58:30.593778 [ 1.083795] io scheduler mq-deadline registered Oct 3 10:58:30.593837 [ 1.088383] io scheduler kyber registered Oct 3 10:58:30.605726 [ 1.097206] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 10:58:30.617700 [ 1.161089] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 10:58:30.677756 [ 1.167297] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 10:58:30.689694 [ 1.195264] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 10:58:30.713804 [ 1.201520] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 10:58:30.725729 [ 1.212884] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 10:58:30.725799 [ 1.219149] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 10:58:30.737743 [ 1.240737] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 10:58:30.761751 [ 1.246934] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 10:58:30.761823 [ 1.282246] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 10:58:30.797763 [ 1.317696] xen:xen_evtchn: Event-channel device installed Oct 3 10:58:30.833712 [ 1.414345] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 10:58:30.929713 [ 1.432379] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 113, base_baud = 0) is a S3C6400/10 Oct 3 10:58:30.953690 [ 1.449919] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 114, base_baud = 0) is a S3C6400/10 Oct 3 10:58:30.965733 [ 1.468830] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 115, base_baud = 0) is a S3C6400/10 Oct 3 10:58:30.989766 [ 1.477204] SuperH (H)SCI(F) driver initialized Oct 3 10:58:30.989828 [ 1.482064] STMicroelectronics ASC driver initialized Oct 3 10:58:31.001709 [ 1.487377] STM32 USART driver initialized Oct 3 10:58:31.001769 [ 1.510923] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 10:58:31.025725 [ 1.549964] brd: module loaded Oct 3 10:58:31.061719 [ 1.555797] loop: module loaded Oct 3 10:58:31.073663 [ 1.672058] Invalid max_queues (4), will use default max: 2. Oct 3 10:58:31.181710 [ 1.701557] tun: Universal TUN/TAP device driver, 1.6 Oct 3 10:58:31.217766 [ 1.705483] CAN device driver interface Oct 3 10:58:31.217824 [ 1.710868] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Oct 3 10:58:31.229748 [ 1.721581] xen_netfront: Initialising Xen virtual ethernet driver Oct 3 10:58:31.241762 [ 1.726486] pegasus: Pegasus/Pegasus II USB Ethernet driver Oct 3 10:58:31.241825 [ 1.732104] usbcore: registered new interface driver pegasus Oct 3 10:58:31.253747 [ 1.737808] usbcore: registered new interface driver asix Oct 3 10:58:31.253810 [ 1.743270] usbcore: registered new interface driver ax88179_178a Oct 3 10:58:31.265719 [ 1.749431] usbcore: registered new interface driver cdc_ether Oct 3 10:58:31.265767 [ 1.751081] Freeing initrd memory: 11780K Oct 3 10:58:31.265793 [ 1.755339] usbcore: registered new interface driver smsc75xx Oct 3 10:58:31.277754 [ 1.765230] usbcore: registered new interface driver smsc95xx Oct 3 10:58:31.277816 [ 1.771041] usbcore: registered new interface driver net1080 Oct 3 10:58:31.289731 [ 1.776762] usbcore: registered new interface driver cdc_subset Oct 3 10:58:31.289794 [ 1.782762] usbcore: registered new interface driver zaurus Oct 3 10:58:31.301644 [ 1.788411] usbcore: registered new interface driver cdc_ncm Oct 3 10:58:31.301682 [ 1.797770] usbcore: registered new interface driver usb-storage Oct 3 10:58:31.313617 [ 1.832059] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 10:58:31.349646 [ 1.840867] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T10:58:33 UTC (1727953113) Oct 3 10:58:31.361630 [ 1.849480] i2c_dev: i2c /dev entries driver Oct 3 10:58:31.361663 [ 1.859767] syscon-poweroff 10040000.system-controller:syscon-poweroff: pm_power_off already claimed for psci_sys_poweroff Oct 3 10:58:31.385684 [ 1.869469] syscon-poweroff: probe of 10040000.system-controller:syscon-poweroff failed with error -16 Oct 3 10:58:31.385728 [ 1.880715] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 10:58:31.397709 [ 1.891576] device-mapper: uevent: version 1.0.3 Oct 3 10:58:31.409728 [ 1.895043] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Oct 3 10:58:31.409799 [ 1.904055] cpu cpu0: OPP table can't be empty Oct 3 10:58:31.421749 [ 1.909084] failed to register cpuidle driver Oct 3 10:58:31.421809 [ 1.912263] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Oct 3 10:58:31.433763 [ 1.920555] sdhci: Secure Digital Host Controller Interface driver Oct 3 10:58:31.433827 [ 1.925628] sdhci: Copyright(c) Pierre Ossman Oct 3 10:58:31.445727 [ 1.933624] sdhci-pltfm: SDHCI platform and OF driver helper Oct 3 10:58:31.445791 [ 1.941327] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 10:58:31.457723 [ 1.946627] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Oct 3 10:58:31.457781 [ 1.953300] usbcore: registered new interface driver usbhid Oct 3 10:58:31.469746 [ 1.958158] usbhid: USB HID core driver Oct 3 10:58:31.469805 [ 1.968975] NET: Registered PF_INET6 protocol family Oct 3 10:58:31.481760 [ 1.973640] Segment Routing with IPv6 Oct 3 10:58:31.481818 [ 1.976329] In-situ OAM (IOAM) with IPv6 Oct 3 10:58:31.493739 [ 1.980392] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Oct 3 10:58:31.493799 [ 1.986759] NET: Registered PF_PACKET protocol family Oct 3 10:58:31.505799 [ 1.991455] can: controller area network core Oct 3 10:58:31.505861 [ 1.995863] NET: Registered PF_CAN protocol family Oct 3 10:58:31.505910 [ 2.000721] can: raw protocol Oct 3 10:58:31.517726 [ 2.003726] can: broadcast manager protocol Oct 3 10:58:31.517759 [ 2.008034] can: netlink gateway - max_hops=1 Oct 3 10:58:31.517785 [ 2.012667] Key type dns_resolver registered Oct 3 10:58:31.529766 [ 2.017414] ThumbEE CPU extension supported. Oct 3 10:58:31.529826 [ 2.021134] Registering SWP/SWPB emulation handler Oct 3 10:58:31.541685 [ 2.026411] Loading compiled-in X.509 certificates Oct 3 10:58:31.541747 [ 2.054776] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 10:58:31.565729 [ 2.060926] clk: Not disabling unused clocks Oct 3 10:58:31.577631 [ 2.067967] Freeing unused kernel image (initmem) memory: 2048K Oct 3 10:58:31.577666 [ 2.074083] Run /init as init process Oct 3 10:58:31.589588 Loading, please wait... Oct 3 10:58:31.613589 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 10:58:31.685575 [ 3.388709] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 10:58:32.909784 [ 3.395774] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 10:58:32.909869 [ 3.408889] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 10:58:32.921647 [ 3.440046] phy phy-12130000.phy.9: phy_power_on was called before phy_init Oct 3 10:58:32.957733 [ 3.445657] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 10:58:32.957772 [ 3.451285] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Oct 3 10:58:32.969719 [ 3.468343] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 10:58:32.981717 [ 3.474534] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 10:58:32.993730 [ 3.481994] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 10:58:33.005722 [ 3.489967] Synopsys Designware Multimedia Card Interface Driver Oct 3 10:58:33.005789 [ 3.495977] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 Oct 3 10:58:33.017706 [ 3.510300] phy phy-12130000.phy.9: phy_power_on was called before phy_init Oct 3 10:58:33.029809 [ 3.515895] exynos-ohci 12120000.usb: USB Host Controller Oct 3 10:58:33.029860 [ 3.521401] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Oct 3 10:58:33.041758 [ 3.529336] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 10:58:33.041821 [ 3.529965] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 10:58:33.053740 [ 3.535635] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 10:58:33.053805 [ 3.549806] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Oct 3 10:58:33.065801 [ 3.558376] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 10:58:33.077704 [ 3.568535] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 Oct 3 10:58:33.089744 [ 3.568838] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 10:58:33.089744 [ 3.580946] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 10:58:33.101796 [ 3.586908] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 10:58:33.101877 [ 3.592456] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo Oct 3 10:58:33.113775 [ 3.602355] mmc_host mmc0: card is polling. Oct 3 10:58:33.113775 [ 3.606473] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 10:58:33.125776 [ 3.612706] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 10:58:33.125776 [ 3.618021] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 10:58:33.137934 [ 3.618265] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 128,32 bit host data width,128 deep fifo Oct 3 10:58:33.149725 [ 3.638092] hub 1-0:1.0: USB hub found Oct 3 10:58:33.149725 [ 3.646127] hub 1-0:1.0: 3 ports detected Oct 3 10:58:33.161734 [ 3.652797] hub 2-0:1.0: USB hub found Oct 3 10:58:33.161734 [ 3.656770] hub 2-0:1.0: 3 ports detected Oct 3 10:58:33.173697 [ 3.690019] scsi host0: ahci-dwc Oct 3 10:58:33.197725 [ 3.692196] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 127 Oct 3 10:58:33.209758 [ 3.702738] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 10:58:33.221772 [ 3.711391] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 10:58:33.221815 [ 3.720567] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Oct 3 10:58:33.233713 [ 3.725384] s3c-rtc 101e0000.rtc: registered as rtc1 Oct 3 10:58:33.245720 [ 3.785333] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 10:58:33.305793 [ 3.799007] mmc0: new DDR MMC card at address 0001 Oct 3 10:58:33.317706 [ 3.807272] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 10:58:33.329787 [ 3.816195] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Oct 3 10:58:33.329790 [ 3.828036] mmc1: new high speed SDHC card at address aaaa Oct 3 10:58:33.341794 [ 3.833748] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Oct 3 10:58:33.341820 [ 3.838988] mmcblk0: p1 p2 p3 p4 Oct 3 10:58:33.353764 [ 3.842243] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Oct 3 10:58:33.353781 [ 3.858827] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Oct 3 10:58:33.377768 [ 3.863675] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Oct 3 10:58:33.377961 [ 4.197968] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 10:58:33.713789 [ 4.203777] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 10:58:33.725816 [ 4.209584] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 10:58:33.725822 [ 4.217316] ata1.00: configured for UDMA/133 Oct 3 10:58:33.725869 [ 4.220898] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 10:58:33.737798 [ 4.230000] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 10:58:33.749912 [ 4.236197] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 10:58:33.749973 [ 4.241635] sd 0:0:0:0: [sda] Write Protect is off Oct 3 10:58:33.761814 [ 4.246468] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 10:58:33.761837 [ 4.255597] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 10:58:33.773753 [ 4.275909] sda: sda1 sda2 < sda5 > Oct 3 10:58:33.785784 [ 4.278684] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 10:58:33.797751 [ 4.291966] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 10:58:33.809847 [ 4.730998] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Oct 3 10:58:34.241763 [ 4.738108] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 10:58:34.253793 [ 4.742343] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 10:58:34.265751 [ 4.755347] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 10:58:34.277729 [ 4.770428] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Oct 3 10:58:34.289806 [ 4.775251] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 10:58:34.289869 [ 4.780686] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 10:58:34.301811 [ 4.788382] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 10:58:34.301850 [ 4.796274] hub 3-0:1.0: USB hub found Oct 3 10:58:34.313792 [ 4.799083] hub 3-0:1.0: 1 port detected Oct 3 10:58:34.313793 [ 4.803474] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 10:58:34.325912 [ 4.811945] hub 4-0:1.0: USB hub found Oct 3 10:58:34.325912 [ 4.814805] hub 4-0:1.0: 1 port detected Oct 3 10:58:34.325912 [ 4.934547] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 10:58:34.457866 [ 5.006840] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 10:58:34.529947 [ 5.115469] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 10:58:34.637730 [ 5.223555] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 10:58:34.745732 [ 5.331746] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 10:58:34.853877 [ 5.439813] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 10:58:34.961826 [ 5.547871] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 10:58:35.069740 [ 5.655942] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 10:58:35.177740 [ 5.764008] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 10:58:35.285734 [ 5.872074] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 10:58:35.384708 [ 6.280787] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 10:58:35.792706 [ 6.388511] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 10:58:35.900704 [ 6.996824] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 10:58:36.516655 [ 7.327937] random: crng init done Oct 3 10:58:36.840561 Begin: Loading essential drivers ... done. Oct 3 10:58:37.396658 Begin: Running /scripts/init-premount ... done. Oct 3 10:58:40.404929 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 10:58:40.416831 Begin: Running /scripts/local-premount ... done. Oct 3 10:58:40.416893 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 10:58:40.488847 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 10:58:40.576812 /dev/mapper/arndale--westfield--vg-root: clean, 46655/1220608 files, 625091/4882432 blocks Oct 3 10:58:40.780836 done. Oct 3 10:58:40.792832 [ 11.284049] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 10:58:40.804757 [ 11.504999] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 10:58:41.020862 done. Oct 3 10:58:41.020914 Begin: Running /scripts/local-bottom ... done. Oct 3 10:58:41.104828 Begin: Running /scripts/init-bottom ... done. Oct 3 10:58:41.152801 INIT: version 3.06 booting Oct 3 10:58:41.636752 INIT: No inittab.d directory found Oct 3 10:58:41.696665 Using makefile-style concurrent boot in runlevel S. Oct 3 10:58:41.960664 Starting hotplug events dispatcher: systemd-udevd. Oct 3 10:58:43.400575 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 10:58:43.856677 Synthesizing the initial hotplug events (devices)...done. Oct 3 10:58:44.616761 Waiting for /dev to be fully populated...[ 15.225424] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Oct 3 10:58:44.736695 [ 15.238137] s5p-secss 10830000.sss: s5p-sss driver registered Oct 3 10:58:44.748682 [ 15.253484] mc: Linux media interface: v0.10 Oct 3 10:58:44.772653 [ 15.334404] videodev: Linux video capture interface: v2.00 Oct 3 10:58:44.844687 [ 15.561011] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 10:58:45.084643 [ 15.587989] s5p-mfc 11000000.codec: Adding to iommu group 0 Oct 3 10:58:45.096676 [ 15.602099] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Oct 3 10:58:45.120675 [ 15.641370] exynos-gsc 13e00000.gsc: Adding to iommu group 1 Oct 3 10:58:45.156700 [ 15.649655] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 10:58:45.168679 [ 15.669806] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 10:58:45.192850 [ 15.677841] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 10:58:45.192923 [ 15.686556] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 10:58:45.204723 [ 15.697504] exynos-gsc 13e10000.gsc: Adding to iommu group 2 Oct 3 10:58:45.216720 [ 15.703771] exynos-gsc 13e20000.gsc: Adding to iommu group 3 Oct 3 10:58:45.216720 [ 15.709344] exynos-gsc 13e30000.gsc: Adding to iommu group 4 Oct 3 10:58:45.228654 [ 15.735913] s5p-mfc 11000000.codec: decoder registered as /dev/video4 Oct 3 10:58:45.252826 [ 15.746553] s5p-mfc 11000000.codec: encoder registered as /dev/video5 Oct 3 10:58:45.264665 [ 15.778299] blk_print_req_error: 6 callbacks suppressed Oct 3 10:58:45.288695 [ 15.778309] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 10:58:45.300688 [ 15.827991] usb3503 usb-hub: switched to HUB mode Oct 3 10:58:45.336678 [ 15.831343] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 10:58:45.352674 [ 15.891733] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 10:58:45.412725 [ 15.999918] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 10:58:45.512708 [ 16.108034] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 10:58:45.620699 [ 16.175282] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Oct 3 10:58:45.692682 [ 16.188574] usb 1-3: new high-speed USB device number 2 using exynos-ehci Oct 3 10:58:45.704688 [ 16.205595] wm8994 3-001a: Device is not a WM8994, ID is 0 Oct 3 10:58:45.716687 [ 16.217212] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 10:58:45.740802 [ 16.272637] wm8994: probe of 3-001a failed with error -22 Oct 3 10:58:45.788810 [ 16.326493] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 10:58:45.848788 [ 16.400824] hub 1-3:1.0: USB hub found Oct 3 10:58:45.908825 [ 16.404803] hub 1-3:1.0: 3 ports detected Oct 3 10:58:45.920804 [ 16.434660] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 10:58:45.956744 [ 16.543653] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 10:58:46.064770 [ 16.631534] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 10:58:46.148832 [ 16.639267] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 10:58:46.160727 [ 16.647986] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 10:58:46.172722 [ 16.659427] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 10:58:46.172722 [ 16.667516] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 10:58:46.184726 [ 16.676266] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 10:58:46.196668 [ 16.767995] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 10:58:46.280697 [ 16.920519] hub 1-3.2:1.0: USB hub found Oct 3 10:58:46.436687 [ 16.923548] hub 1-3.2:1.0: 4 ports detected Oct 3 10:58:46.436687 [ 16.959440] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 10:58:46.472723 [ 16.992470] usbcore: registered new device driver onboard-usb-hub Oct 3 10:58:46.512671 [ 17.067191] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 10:58:46.584683 [ 17.120721] hub 1-3.2:1.0: USB hub found Oct 3 10:58:46.636840 [ 17.123681] hub 1-3.2:1.0: 4 ports detected Oct 3 10:58:46.636905 [ 17.134902] hub 1-3.2:1.0: USB hub found Oct 3 10:58:46.648848 [ 17.137878] hub 1-3.2:1.0: 4 ports detected Oct 3 10:58:46.648908 [ 17.457956] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 10:58:46.976766 [ 17.611126] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 10:58:47.132766 [ 17.675575] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 10:58:47.192803 [ 18.279874] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 10:58:47.796709 [ 18.294119] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Oct 3 10:58:47.808716 [ 18.303951] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, e2:fe:60:64:cf:0f Oct 3 10:58:47.820706 done. Oct 3 10:58:48.072650 [ 18.909243] EXT4-fs (dm-0): re-mounted. Quota mode: disabled. Oct 3 10:58:48.422427 Checking file systems.../dev/sda1: clean, 2105/61056 files, 43331/243968 blocks Oct 3 10:58:49.412637 done. Oct 3 10:58:49.448643 Cleaning up temporary files... /tmp Oct 3 10:58:49.652645 . Oct 3 10:58:49.652645 [ 20.333638] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 10:58:49.844627 [ 20.382348] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 10:58:49.904740 [ 20.477750] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k Oct 3 10:58:50.000757 Mounting local filesystems...done. Oct 3 10:58:50.228680 Activating swapfile swap, if any...done. Oct 3 10:58:50.228680 Cleaning up temporary files.... Oct 3 10:58:50.252664 Starting Setting kernel variables: sysctl. Oct 3 10:58:50.408782 [ 22.302582] xenbr0: port 1(eth0) entered blocking state Oct 3 10:58:51.820835 [ 22.306471] xenbr0: port 1(eth0) entered disabled state Oct 3 10:58:51.820835 [ 22.311953] device eth0 entered promiscuous mode Oct 3 10:58:51.820835 [ 22.321992] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 10:58:51.832690 Configuring network interfaces...RTNETLINK answers: Operation not supported Oct 3 10:58:53.696760 Oct 3 10:58:53.696827 Waiting for xenbr0 to get ready (MAXWAIT is 2 seconds). Oct 3 10:58:53.696878 [ 24.495377] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 10:58:54.013767 [ 24.497995] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 3 10:58:54.013823 [ 24.507725] xenbr0: port 1(eth0) entered blocking state Oct 3 10:58:54.025240 [ 24.512989] xenbr0: port 1(eth0) entered forwarding state Oct 3 10:58:54.025240 [ 24.518551] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready Oct 3 10:58:54.037243 done. Oct 3 10:58:54.217659 Cleaning up temporary files.... Oct 3 10:58:54.291036 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Oct 3 10:58:54.325646 Starting nftables: none Oct 3 10:58:54.375710 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Oct 3 10:58:54.445235 failed! Oct 3 10:58:54.445235 startpar: service(s) returned failure: nftables ... failed! Oct 3 10:58:54.464920 INIT: Entering runlevel: 2 Oct 3 10:58:54.476908 Using makefile-style concurrent boot in runlevel 2. Oct 3 10:58:54.488864 Starting Apache httpd web server: apache2AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.149.64.45. Set the 'ServerName' directive globally to suppress this message Oct 3 10:58:55.272884 . Oct 3 10:58:56.356809 Starting NTP server: ntpd2024-10-03T10:58:58 ntpd[1145]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 10:58:56.637011 2024-10-03T10:58:58 ntpd[1145]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 10:58:56.637098 . Oct 3 10:58:56.648920 Starting system message bus: dbus. Oct 3 10:58:57.020807 [ 27.529896] platform sound: deferred probe pending Oct 3 10:58:57.044783 Starting SMP IRQ Balancer: irqbalance. Oct 3 10:58:57.176840 Starting OpenBSD Secure Shell server: sshd. Oct 3 10:58:57.972806 Starting /usr/local/sbin/xenstored... Oct 3 10:59:00.212840 Setting domain 0 name, domid and JSON config... Oct 3 10:59:00.224889 Done setting up Dom0 Oct 3 10:59:00.224889 Starting xenconsoled... Oct 3 10:59:00.224889 Starting QEMU as disk backend for dom0 Oct 3 10:59:00.224889 Starting libvirt management daemon: libvirtd2024-10-03 10:59:03.090+0000: 1246: info : libvirt version: 10.9.0 Oct 3 10:59:01.064886 2024-10-03 10:59:03.090+0000: 1246: info : hostname: arndale-westfield Oct 3 10:59:01.064886 2024-10-03 10:59:03.090+0000: 1246: debug : virLogParseOutputs:1638 : outputs=1:file:/var/log/libvirt/libvirtd.log Oct 3 10:59:01.076881 2024-10-03 10:59:03.093+0000: 1246: debug : virLogParseOutput:1485 : output=1:file:/var/log/libvirt/libvirtd.log Oct 3 10:59:01.088850 . Oct 3 10:59:01.088850 Oct 3 10:59:02.196793 Debian GNU/Linux 12 arndale-westfield hvc0 Oct 3 10:59:02.196793 Oct 3 10:59:02.196793 arndale-westfield login: [ 117.263131] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 11:00:26.777798 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 11:00:41.349727 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 11:07:22.761741 [ 634.510156] EXT4-fs (dm-3): unmounting filesystem. Oct 3 11:09:04.021757 [ 641.177267] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 11:09:10.693747 [ 646.201605] EXT4-fs (dm-3): unmounting filesystem. Oct 3 11:09:15.713754 [ 664.799856] xenbr0: port 2(vif1.0) entered blocking state Oct 3 11:09:34.309767 [ 664.803887] xenbr0: port 2(vif1.0) entered disabled state Oct 3 11:09:34.309839 [ 664.809561] device vif1.0 entered promiscuous mode Oct 3 11:09:34.321684 (XEN) d1v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 11:09:35.425702 (XEN) d1v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 11:09:35.437720 (XEN) common/grant_table.c:1909:d1v0 Expanding d1 grant table from 1 to 2 frames Oct 3 11:09:36.061775 [ 666.748206] vif vif-1-0 vif1.0: Guest Rx ready Oct 3 11:09:36.253704 [ 666.758188] IPv6: ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready Oct 3 11:09:36.265747 [ 666.763965] xenbr0: port 2(vif1.0) entered blocking state Oct 3 11:09:36.277716 [ 666.768853] xenbr0: port 2(vif1.0) entered forwarding state Oct 3 11:09:36.277781 (XEN) gnttab_mark_dirty not implemented yet Oct 3 11:09:36.301702 [ 710.234159] xenbr0: port 2(vif1.0) entered disabled state Oct 3 11:10:19.737667 [ 710.438632] xenbr0: port 2(vif1.0) entered disabled state Oct 3 11:10:19.941673 [ 710.445362] device vif1.0 left promiscuous mode Oct 3 11:10:19.953743 [ 710.448638] xenbr0: port 2(vif1.0) entered disabled state Oct 3 11:10:19.953806 [ 766.704226] xenbr0: port 2(vif2.0) entered blocking state Oct 3 11:11:16.212904 [ 766.708310] xenbr0: port 2(vif2.0) entered disabled state Oct 3 11:11:16.212904 [ 766.713894] device vif2.0 entered promiscuous mode Oct 3 11:11:16.224836 (XEN) d2v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 11:11:17.320838 (XEN) d2v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 11:11:17.332836 (XEN) common/grant_table.c:1909:d2v0 Expanding d2 grant table from 1 to 2 frames Oct 3 11:11:18.028822 [ 768.641398] vif vif-2-0 vif2.0: Guest Rx ready Oct 3 11:11:18.149336 [ 768.644506] IPv6: ADDRCONF(NETDEV_CHANGE): vif2.0: link becomes ready Oct 3 11:11:18.149394 [ 768.651221] xenbr0: port 2(vif2.0) entered blocking state Oct 3 11:11:18.160891 [ 768.658042] xenbr0: port 2(vif2.0) entered forwarding state Oct 3 11:11:18.161028 [ 808.427531] xenbr0: port 2(vif2.0) entered disabled state Oct 3 11:11:57.932881 [ 808.568566] xenbr0: port 2(vif2.0) entered disabled state Oct 3 11:11:58.080770 [ 808.573627] device vif2.0 left promiscuous mode Oct 3 11:11:58.080804 [ 808.577227] xenbr0: port 2(vif2.0) entered disabled state Oct 3 11:11:58.080832 [ 864.095520] xenbr0: port 2(vif3.0) entered blocking state Oct 3 11:12:53.605095 [ 864.099605] xenbr0: port 2(vif3.0) entered disabled state Oct 3 11:12:53.605178 [ 864.105193] device vif3.0 entered promiscuous mode Oct 3 11:12:53.616906 (XEN) d3v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 11:12:54.701042 (XEN) d3v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 11:12:54.713015 (XEN) common/grant_table.c:1909:d3v0 Expanding d3 grant table from 1 to 2 frames Oct 3 11:12:55.581029 [ 866.231894] vif vif-3-0 vif3.0: Guest Rx ready Oct 3 11:12:55.737071 [ 866.236271] IPv6: ADDRCONF(NETDEV_CHANGE): vif3.0: link becomes ready Oct 3 11:12:55.749048 [ 866.241669] xenbr0: port 2(vif3.0) entered blocking state Oct 3 11:12:55.749112 [ 866.247007] xenbr0: port 2(vif3.0) entered forwarding state Oct 3 11:12:55.760908 [ 912.488128] xenbr0: port 2(vif3.0) entered disabled state Oct 3 11:13:41.989106 [ 912.618682] xenbr0: port 2(vif3.0) entered disabled state Oct 3 11:13:42.121001 [ 912.623482] device vif3.0 left promiscuous mode Oct 3 11:13:42.132932 [ 912.627383] xenbr0: port 2(vif3.0) entered disabled state Oct 3 11:13:42.132971 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 11:14:03.237086 [ 968.472141] xenbr0: port 2(vif4.0) entered blocking state Oct 3 11:14:37.980715 [ 968.476177] xenbr0: port 2(vif4.0) entered disabled state Oct 3 11:14:37.980715 [ 968.481864] device vif4.0 entered promiscuous mode Oct 3 11:14:37.992653 (XEN) d4v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 11:14:39.076837 (XEN) d4v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 11:14:39.088679 (XEN) common/grant_table.c:1909:d4v0 Expanding d4 grant table from 1 to 2 frames Oct 3 11:14:39.940843 [ 970.619378] vif vif-4-0 vif4.0: Guest Rx ready Oct 3 11:14:40.120886 [ 970.622603] IPv6: ADDRCONF(NETDEV_CHANGE): vif4.0: link becomes ready Oct 3 11:14:40.132866 [ 970.629156] xenbr0: port 2(vif4.0) entered blocking state Oct 3 11:14:40.132866 [ 970.634590] xenbr0: port 2(vif4.0) entered forwarding state Oct 3 11:14:40.144818 [ 1010.114800] xenbr0: port 2(vif4.0) entered disabled state Oct 3 11:15:19.620745 [ 1010.298676] xenbr0: port 2(vif4.0) entered disabled state Oct 3 11:15:19.800744 [ 1010.309793] device vif4.0 left promiscuous mode Oct 3 11:15:19.812779 [ 1010.312975] xenbr0: port 2(vif4.0) entered disabled state Oct 3 11:15:19.824714 [ 1065.792986] xenbr0: port 2(vif5.0) entered blocking state Oct 3 11:16:15.297764 [ 1065.797023] xenbr0: port 2(vif5.0) entered disabled state Oct 3 11:16:15.297818 [ 1065.802700] device vif5.0 entered promiscuous mode Oct 3 11:16:15.309646 (XEN) d5v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 11:16:16.389638 (XEN) d5v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 11:16:16.401677 (XEN) common/grant_table.c:1909:d5v0 Expanding d5 grant table from 1 to 2 frames Oct 3 11:16:17.217719 [ 1067.954990] vif vif-5-0 vif5.0: Guest Rx ready Oct 3 11:16:17.457779 [ 1067.958240] IPv6: ADDRCONF(NETDEV_CHANGE): vif5.0: link becomes ready Oct 3 11:16:17.469778 [ 1067.964777] xenbr0: port 2(vif5.0) entered blocking state Oct 3 11:16:17.469842 [ 1067.970172] xenbr0: port 2(vif5.0) entered forwarding state Oct 3 11:16:17.481694 [ 1103.130050] xenbr0: port 2(vif5.0) entered disabled state Oct 3 11:16:52.637736 [ 1103.268712] xenbr0: port 2(vif5.0) entered disabled state Oct 3 11:16:52.769793 [ 1103.273319] device vif5.0 left promiscuous mode Oct 3 11:16:52.781737 [ 1103.277401] xenbr0: port 2(vif5.0) entered disabled state Oct 3 11:16:52.781799 [ 1158.899187] xenbr0: port 2(vif6.0) entered blocking state Oct 3 11:17:48.401686 [ 1158.903216] xenbr0: port 2(vif6.0) entered disabled state Oct 3 11:17:48.413632 [ 1158.908942] device vif6.0 entered promiscuous mode Oct 3 11:17:48.413664 (XEN) d6v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 11:17:49.505636 (XEN) d6v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 11:17:49.517638 (XEN) common/grant_table.c:1909:d6v0 Expanding d6 grant table from 1 to 2 frames Oct 3 11:17:50.069661 [ 1160.688356] vif vif-6-0 vif6.0: Guest Rx ready Oct 3 11:17:50.189653 [ 1160.692066] IPv6: ADDRCONF(NETDEV_CHANGE): vif6.0: link becomes ready Oct 3 11:17:50.201667 [ 1160.698096] xenbr0: port 2(vif6.0) entered blocking state Oct 3 11:17:50.201701 [ 1160.703443] xenbr0: port 2(vif6.0) entered forwarding state Oct 3 11:17:50.213602 [ 1196.335016] xenbr0: port 2(vif6.0) entered disabled state Oct 3 11:18:25.837777 [ 1196.528804] xenbr0: port 2(vif6.0) entered disabled state Oct 3 11:18:26.029765 [ 1196.535002] device vif6.0 left promiscuous mode Oct 3 11:18:26.041748 [ 1196.538277] xenbr0: port 2(vif6.0) entered disabled state Oct 3 11:18:26.041812 [ 1252.063828] xenbr0: port 2(vif7.0) entered blocking state Oct 3 11:19:21.572871 [ 1252.067861] xenbr0: port 2(vif7.0) entered disabled state Oct 3 11:19:21.572871 [ 1252.073548] device vif7.0 entered promiscuous mode Oct 3 11:19:21.572871 (XEN) d7v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 11:19:22.673009 (XEN) d7v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 11:19:22.685006 (XEN) common/grant_table.c:1909:d7v0 Expanding d7 grant table from 1 to 2 frames Oct 3 11:19:23.669766 [ 1254.286446] vif vif-7-0 vif7.0: Guest Rx ready Oct 3 11:19:23.789779 [ 1254.291119] IPv6: ADDRCONF(NETDEV_CHANGE): vif7.0: link becomes ready Oct 3 11:19:23.789846 [ 1254.296431] xenbr0: port 2(vif7.0) entered blocking state Oct 3 11:19:23.801767 [ 1254.301762] xenbr0: port 2(vif7.0) entered forwarding state Oct 3 11:19:23.801830 [ 1293.272932] xenbr0: port 2(vif7.0) entered disabled state Oct 3 11:20:02.772874 [ 1293.468523] xenbr0: port 2(vif7.0) entered disabled state Oct 3 11:20:02.976839 [ 1293.473172] device vif7.0 left promiscuous mode Oct 3 11:20:02.976839 [ 1293.477216] xenbr0: port 2(vif7.0) entered disabled state Oct 3 11:20:02.976839 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 11:20:44.152917 [ 1349.076497] xenbr0: port 2(vif8.0) entered blocking state Oct 3 11:20:58.576865 [ 1349.080585] xenbr0: port 2(vif8.0) entered disabled state Oct 3 11:20:58.588834 [ 1349.086168] device vif8.0 entered promiscuous mode Oct 3 11:20:58.588834 (XEN) d8v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 11:20:59.668816 (XEN) d8v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 11:20:59.680820 (XEN) common/grant_table.c:1909:d8v0 Expanding d8 grant table from 1 to 2 frames Oct 3 11:21:00.316833 [ 1351.029975] vif vif-8-0 vif8.0: Guest Rx ready Oct 3 11:21:00.532804 [ 1351.033229] IPv6: ADDRCONF(NETDEV_CHANGE): vif8.0: link becomes ready Oct 3 11:21:00.532804 [ 1351.039748] xenbr0: port 2(vif8.0) entered blocking state Oct 3 11:21:00.544794 [ 1351.050670] xenbr0: port 2(vif8.0) entered forwarding state Oct 3 11:21:00.556844 [ 1351.056558] xen_netback:xenvif_start_xmit: Invalid queue 1 for packet on interface vif8.0 Oct 3 11:21:00.568826 [ 1351.074575] xen_netback:xenvif_start_xmit: Invalid queue 1 for packet on interface vif8.0 Oct 3 11:21:00.580852 [ 1351.085285] xen_netback:xenvif_start_xmit: Invalid queue 1 for packet on interface vif8.0 Oct 3 11:21:00.592812 [ 1390.278701] xenbr0: port 2(vif8.0) entered disabled state Oct 3 11:21:39.777776 [ 1390.388673] xenbr0: port 2(vif8.0) entered disabled state Oct 3 11:21:39.885754 [ 1390.393281] device vif8.0 left promiscuous mode Oct 3 11:21:39.897791 [ 1390.397333] xenbr0: port 2(vif8.0) entered disabled state Oct 3 11:21:39.897854 [ 1446.059005] xenbr0: port 2(vif9.0) entered blocking state Oct 3 11:22:35.565810 [ 1446.063038] xenbr0: port 2(vif9.0) entered disabled state Oct 3 11:22:35.565905 [ 1446.068719] device vif9.0 entered promiscuous mode Oct 3 11:22:35.565957 (XEN) d9v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 11:22:36.669697 (XEN) d9v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 11:22:36.681726 (XEN) common/grant_table.c:1909:d9v0 Expanding d9 grant table from 1 to 2 frames Oct 3 11:22:37.681713 [ 1448.418161] vif vif-9-0 vif9.0: Guest Rx ready Oct 3 11:22:37.921788 [ 1448.421584] IPv6: ADDRCONF(NETDEV_CHANGE): vif9.0: link becomes ready Oct 3 11:22:37.921864 [ 1448.427982] xenbr0: port 2(vif9.0) entered blocking state Oct 3 11:22:37.933775 [ 1448.433305] xenbr0: port 2(vif9.0) entered forwarding state Oct 3 11:22:37.933839 [ 1483.871965] xenbr0: port 2(vif9.0) entered disabled state Oct 3 11:23:13.377766 [ 1483.988499] xenbr0: port 2(vif9.0) entered disabled state Oct 3 11:23:13.485744 [ 1484.003415] device vif9.0 left promiscuous mode Oct 3 11:23:13.509722 [ 1484.006580] xenbr0: port 2(vif9.0) entered disabled state Oct 3 11:23:13.509787 [ 1538.534425] xenbr0: port 2(vif10.0) entered blocking state Oct 3 11:24:08.032879 [ 1538.538593] xenbr0: port 2(vif10.0) entered disabled state Oct 3 11:24:08.044855 [ 1538.544261] device vif10.0 entered promiscuous mode Oct 3 11:24:08.044855 (XEN) d10v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 11:24:09.140826 (XEN) d10v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 11:24:09.152824 (XEN) common/grant_table.c:1909:d10v0 Expanding d10 grant table from 1 to 2 frames Oct 3 11:24:09.908820 [ 1540.579955] vif vif-10-0 vif10.0: Guest Rx ready Oct 3 11:24:10.076835 [ 1540.583328] IPv6: ADDRCONF(NETDEV_CHANGE): vif10.0: link becomes ready Oct 3 11:24:10.088857 [ 1540.590227] xenbr0: port 2(vif10.0) entered blocking state Oct 3 11:24:10.100830 [ 1540.599456] xenbr0: port 2(vif10.0) entered forwarding state Oct 3 11:24:10.100975 [ 1580.054130] xenbr0: port 2(vif10.0) entered disabled state Oct 3 11:24:49.557732 [ 1580.198400] xenbr0: port 2(vif10.0) entered disabled state Oct 3 11:24:49.701739 [ 1580.203476] device vif10.0 left promiscuous mode Oct 3 11:24:49.701803 [ 1580.207229] xenbr0: port 2(vif10.0) entered disabled state Oct 3 11:24:49.701854 [ 1634.734026] xenbr0: port 2(vif11.0) entered blocking state Oct 3 11:25:44.237767 [ 1634.738193] xenbr0: port 2(vif11.0) entered disabled state Oct 3 11:25:44.237842 [ 1634.743889] device vif11.0 entered promiscuous mode Oct 3 11:25:44.249687 (XEN) d11v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 11:25:45.353727 (XEN) d11v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 11:25:45.365657 (XEN) common/grant_table.c:1909:d11v0 Expanding d11 grant table from 1 to 2 frames Oct 3 11:25:46.217708 [ 1636.811328] vif vif-11-0 vif11.0: Guest Rx ready Oct 3 11:25:46.313733 [ 1636.815922] IPv6: ADDRCONF(NETDEV_CHANGE): vif11.0: link becomes ready Oct 3 11:25:46.313800 [ 1636.821437] xenbr0: port 2(vif11.0) entered blocking state Oct 3 11:25:46.325719 [ 1636.826801] xenbr0: port 2(vif11.0) entered forwarding state Oct 3 11:25:46.325783 [ 1676.413916] xenbr0: port 2(vif11.0) entered disabled state Oct 3 11:26:25.905772 [ 1676.608524] xenbr0: port 2(vif11.0) entered disabled state Oct 3 11:26:26.109752 [ 1676.613239] device vif11.0 left promiscuous mode Oct 3 11:26:26.109814 [ 1676.617371] xenbr0: port 2(vif11.0) entered disabled state Oct 3 11:26:26.121726 [ 1732.571211] xenbr0: port 2(vif12.0) entered blocking state Oct 3 11:27:22.065753 [ 1732.575333] xenbr0: port 2(vif12.0) entered disabled state Oct 3 11:27:22.077751 [ 1732.581098] device vif12.0 entered promiscuous mode Oct 3 11:27:22.077813 (XEN) d12v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 11:27:23.169755 (XEN) d12v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 11:27:23.181788 (XEN) common/grant_table.c:1909:d12v0 Expanding d12 grant table from 1 to 2 frames Oct 3 11:27:24.177728 [ 1734.787102] vif vif-12-0 vif12.0: Guest Rx ready Oct 3 11:27:24.285783 [ 1734.790526] IPv6: ADDRCONF(NETDEV_CHANGE): vif12.0: link becomes ready Oct 3 11:27:24.297770 [ 1734.797072] xenbr0: port 2(vif12.0) entered blocking state Oct 3 11:27:24.297833 [ 1734.802554] xenbr0: port 2(vif12.0) entered forwarding state Oct 3 11:27:24.297883 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 11:27:25.125698 [ 1767.856097] xenbr0: port 2(vif12.0) entered disabled state Oct 3 11:27:57.353782 [ 1767.938391] xenbr0: port 2(vif12.0) entered disabled state Oct 3 11:27:57.437802 [ 1767.943156] device vif12.0 left promiscuous mode Oct 3 11:27:57.437865 [ 1767.947218] xenbr0: port 2(vif12.0) entered disabled state Oct 3 11:27:57.449757 Oct 3 11:28:18.822769 (XEN) *** Serial input to Xen (type 'CTRL-x' three times to switch input) Oct 3 11:28:18.841661 Oct 3 11:28:18.842376 Oct 3 11:28:19.827230 (XEN) '0' pressed -> dumping Dom0's registers Oct 3 11:28:19.849729 (XEN) *** Dumping Dom0 vcpu#0 state: *** Oct 3 11:28:19.849762 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Oct 3 11:28:19.851107 Not tainted ]---- Oct 3 11:28:19.861711 (XEN) CPU: 0 Oct 3 11:28:19.861758 (XEN) PC: c031ce28 Oct 3 11:28:19.861802 (XEN) CPSR: 600d0093 MODE:32-bit Guest SVC Oct 3 11:28:19.861850 (XEN) R0: 00000005 R1: 00000000 R2: 004b8581 R3: c031ce20 Oct 3 11:28:19.873676 (XEN) R4: c1909d80 R5: c1b12200 R6: c1904d1c R7: c1904d78 Oct 3 11:28:19.873711 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c00 Oct 3 11:28:19.885667 (XEN) USR: SP: bebd0948 LR: b6c0f893 Oct 3 11:28:19.885700 (XEN) SVC: SP: c1901f40 LR: c0308df0 SPSR:600d0013 Oct 3 11:28:19.885726 (XEN) ABT: SP: c1b22b10 LR: c0300ea0 SPSR:600f0193 Oct 3 11:28:19.897615 (XEN) UND: SP: c1b22b20 LR: c0300fa0 SPSR:600d0093 Oct 3 11:28:19.897649 (XEN) IRQ: SP: c1b22b00 LR: c0300ba0 SPSR:600d0193 Oct 3 11:28:19.909666 (XEN) FIQ: SP: c1b22b30 LR: c1b22b30 SPSR:00000000 Oct 3 11:28:19.909699 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 11:28:19.909727 (XEN) Oct 3 11:28:19.921722 (XEN) SCTLR: 10c5387d Oct 3 11:28:19.921754 (XEN) TCR: 00000000 Oct 3 11:28:19.921810 (XEN) TTBR0: 0000000063f0806a Oct 3 11:28:19.921854 (XEN) TTBR1: 000000006020406a Oct 3 11:28:19.921930 (XEN) IFAR: b6e22814, IFSR: 00000007 Oct 3 11:28:19.933710 (XEN) DFAR: 00538318, DFSR: 0000081f Oct 3 11:28:19.933765 (XEN) Oct 3 11:28:19.933806 (XEN) VTCR_EL2: 80003558 Oct 3 11:28:19.933849 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 11:28:19.945683 (XEN) Oct 3 11:28:19.945713 (XEN) SCTLR_EL2: 30cd187f Oct 3 11:28:19.945737 (XEN) HCR_EL2: 007c663f Oct 3 11:28:19.945761 (XEN) TTBR0_EL2: 000000004110e000 Oct 3 11:28:19.945785 (XEN) Oct 3 11:28:19.945806 (XEN) ESR_EL2: 07e00000 Oct 3 11:28:19.957673 (XEN) HPFAR_EL2: 00104810 Oct 3 11:28:19.957704 (XEN) HDFAR: e0807f00 Oct 3 11:28:19.957729 (XEN) HIFAR: c0a19dbc Oct 3 11:28:19.957752 (XEN) Oct 3 11:28:19.957773 (XEN) Guest stack trace from sp=c1901f40: Oct 3 11:28:19.969782 (XEN) Failed to convert stack to physical address Oct 3 11:28:19.969816 (XEN) *** Dumping Dom0 vcpu#1 state: *** Oct 3 11:28:19.969842 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 11:28:19.985619 (XEN) CPU: 0 Oct 3 11:28:19.985649 (XEN) PC: c031ce28 Oct 3 11:28:19.985677 (XEN) CPSR: 600f0093 MODE:32-bit Guest SVC Oct 3 11:28:19.985706 (XEN) R0: 00000005 R1: 00000000 R2: 0043bfb1 R3: c031ce20 Oct 3 11:28:19.985733 (XEN) R4: c210e600 R5: c1b12200 R6: c1904d1c R7: c1904d78 Oct 3 11:28:19.997666 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c00 Oct 3 11:28:20.013856 (XEN) USR: SP: bebc6970 LR: b6db46c5 Oct 3 11:28:20.013889 (XEN) SVC: SP: e08c9f90 LR: c0308df0 SPSR:600f0013 Oct 3 11:28:20.013915 (XEN) ABT: SP: c1b22b50 LR: c03011c0 SPSR:600f0193 Oct 3 11:28:20.013940 (XEN) UND: SP: c1b22b60 LR: c0300fa0 SPSR:60030093 Oct 3 11:28:20.029817 (XEN) IRQ: SP: c1b22b40 LR: c0300ba0 SPSR:600f0193 Oct 3 11:28:20.029851 (XEN) FIQ: SP: c1b22b70 LR: c1b22b70 SPSR:00000000 Oct 3 11:28:20.029876 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 11:28:20.041701 (XEN) Oct 3 11:28:20.041730 (XEN) SCTLR: 10c5387d Oct 3 11:28:20.041754 (XEN) TCR: 00000000 Oct 3 11:28:20.041776 (XEN) TTBR0: 000000006509806a Oct 3 11:28:20.041799 (XEN) TTBR1: 000000006020406a Oct 3 11:28:20.053643 (XEN) IFAR: b6f8c96c, IFSR: 00000007 Oct 3 11:28:20.053675 (XEN) DFAR: b6c6f000, DFSR: 0000081f Oct 3 11:28:20.053700 (XEN) Oct 3 11:28:20.053721 (XEN) VTCR_EL2: 80003558 Oct 3 11:28:20.053744 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 11:28:20.065673 (XEN) Oct 3 11:28:20.065701 (XEN) SCTLR_EL2: 30cd187f Oct 3 11:28:20.065726 (XEN) HCR_EL2: 007c663f Oct 3 11:28:20.065749 (XEN) TTBR0_EL2: 000000004110e000 Oct 3 11:28:20.065772 (XEN) Oct 3 11:28:20.065793 (XEN) ESR_EL2: 07e00000 Oct 3 11:28:20.077737 (XEN) HPFAR_EL2: 00104810 Oct 3 11:28:20.077768 (XEN) HDFAR: e0807f00 Oct 3 11:28:20.077792 (XEN) HIFAR: c0a19dbc Oct 3 11:28:20.077815 (XEN) Oct 3 11:28:20.077836 (XEN) Guest stack trace from sp=e08c9f90: Oct 3 11:28:20.089681 (XEN) Failed to convert stack to physical address Oct 3 11:28:20.089714 Oct 3 11:28:21.834170 (XEN) 'H' pressed -> dumping heap info (now = 1797647942458) Oct 3 11:28:21.857768 (XEN) heap[node=0][zone=0] -> 16281 pages Oct 3 11:28:21.857800 (XEN) heap[node=0][zone=1] -> 0 Oct 3 11:28:21.859069 pages Oct 3 11:28:21.873698 (XEN) heap[node=0][zone=2] -> 0 pages Oct 3 11:28:21.873733 (XEN) heap[node=0][zone=3] -> 0 pages Oct 3 11:28:21.873759 (XEN) heap[node=0][zone=4] -> 0 pages Oct 3 11:28:21.873791 (XEN) heap[node=0][zone=5] -> 0 pages Oct 3 11:28:21.873823 (XEN) heap[node=0][zone=6] -> 0 pages Oct 3 11:28:21.885638 (XEN) heap[node=0][zone=7] -> 0 pages Oct 3 11:28:21.885667 (XEN) heap[node=0][zone=8] -> 0 pages Oct 3 11:28:21.885691 (XEN) heap[node=0][zone=9] -> 0 pages Oct 3 11:28:21.885714 (XEN) heap[node=0][zone=10] -> 0 pages Oct 3 11:28:21.897758 (XEN) heap[node=0][zone=11] -> 0 pages Oct 3 11:28:21.897789 (XEN) heap[node=0][zone=12] -> 0 pages Oct 3 11:28:21.897814 (XEN) heap[node=0][zone=13] -> 0 pages Oct 3 11:28:21.909718 (XEN) heap[node=0][zone=14] -> 0 pages Oct 3 11:28:21.909751 (XEN) heap[node=0][zone=15] -> 0 pages Oct 3 11:28:21.909776 (XEN) heap[node=0][zone=16] -> 0 pages Oct 3 11:28:21.921792 (XEN) heap[node=0][zone=17] -> 0 pages Oct 3 11:28:21.921825 (XEN) heap[node=0][zone=18] -> 0 pages Oct 3 11:28:21.921849 (XEN) heap[node=0][zone=19] -> 130835 pages Oct 3 11:28:21.921873 (XEN) heap[node=0][zone=20] -> 241607 pages Oct 3 11:28:21.933765 (XEN) heap[node=0][zone=21] -> 0 pages Oct 3 11:28:21.933797 (XEN) heap[node=0][zone=22] -> 0 pages Oct 3 11:28:21.933841 (XEN) heap[node=0][zone=23] -> 0 pages Oct 3 11:28:21.945801 (XEN) heap[node=0][zone=24] -> 0 pages Oct 3 11:28:21.945834 (XEN) heap[node=0][zone=25] -> 0 pages Oct 3 11:28:21.945859 (XEN) heap[node=0][zone=26] -> 0 pages Oct 3 11:28:21.945882 (XEN) heap[node=0][zone=27] -> 0 pages Oct 3 11:28:21.957550 (XEN) heap[node=0][zone=28] -> 0 pages Oct 3 11:28:21.957582 Oct 3 11:28:23.830043 Oct 3 11:28:25.634596 Oct 3 11:28:25.842570 Oct 3 11:28:27.640543 Oct 3 11:28:27.848103 (XEN) Dumping timer queues: Oct 3 11:28:27.865786 (XEN) CPU00: Oct 3 11:28:27.865817 (XEN) ex= 388408us timer=43fdc968 cb=vtimer.c#virt_timer_expired(43fdc960) Oct 3 11:28:27.865847 (XEN) CPU0 Oct 3 11:28:27.867104 1: Oct 3 11:28:27.881775 (XEN) ex= 106113us timer=43fee968 cb=vtimer.c#virt_timer_expired(43fee960) Oct 3 11:28:27.881813 Oct 3 11:28:29.842706 Oct 3 11:28:31.649301 Oct 3 11:28:31.854956 (XEN) 'd' pressed -> dumping registers Oct 3 11:28:31.877769 (XEN) Oct 3 11:28:31.877798 (XEN) *** Dumping CPU0 host state: *** Oct 3 11:28:31.877823 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 11:28:31.877853 (XEN) CPU: 0 Oct 3 11:28:31.877875 (XEN) PC: Oct 3 11:28:31.880537 0025f53c domain.c#idle_loop+0x130/0x1ac Oct 3 11:28:31.889723 (XEN) CPSR: 600f005a MODE:Hypervisor Oct 3 11:28:31.889754 (XEN) R0: 00000000 R1: 00000001 R2: 00000000 R3: 00000000 Oct 3 11:28:31.901774 (XEN) R4: 00000000 R5: 003000e0 R6: 00331324 R7: 00000001 Oct 3 11:28:31.901808 (XEN) R8: 00331104 R9: 00000000 R10:40e00000 R11:4003ff54 R12:fffffffc Oct 3 11:28:31.913737 (XEN) HYP: SP: 4003ff44 LR: 00225b7c Oct 3 11:28:31.913769 (XEN) Oct 3 11:28:31.913791 (XEN) VTCR_EL2: 80003558 Oct 3 11:28:31.913814 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 11:28:31.913837 (XEN) Oct 3 11:28:31.913858 (XEN) SCTLR_EL2: 30cd187f Oct 3 11:28:31.925725 (XEN) HCR_EL2: 007c663f Oct 3 11:28:31.925756 (XEN) TTBR0_EL2: 000000004110e000 Oct 3 11:28:31.925780 (XEN) Oct 3 11:28:31.925801 (XEN) ESR_EL2: 07e00000 Oct 3 11:28:31.925824 (XEN) HPFAR_EL2: 00104810 Oct 3 11:28:31.937721 (XEN) HDFAR: e0807f00 Oct 3 11:28:31.937752 (XEN) HIFAR: c0a19dbc Oct 3 11:28:31.937775 (XEN) Oct 3 11:28:31.937796 (XEN) Xen stack trace from sp=4003ff44: Oct 3 11:28:31.937821 (XEN) 07e00000 00295014 002919bc 4003ff4c 002678fc 00000000 00000000 00000000 Oct 3 11:28:31.949711 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 11:28:31.961644 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 11:28:31.961678 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 11:28:31.973631 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 11:28:31.973662 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 11:28:31.985716 (XEN) Xen call trace: Oct 3 11:28:31.985747 (XEN) [<0025f53c>] domain.c#idle_loop+0x130/0x1ac (PC) Oct 3 11:28:31.985774 (XEN) [<00225b7c>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 11:28:31.997724 (XEN) [<002678fc>] arch_get_xen_caps+0/0x90 Oct 3 11:28:31.997761 (XEN) Oct 3 11:28:31.997783 (XEN) *** Dumping CPU1 host state: *** Oct 3 11:28:31.997807 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 11:28:32.009731 (XEN) CPU: 1 Oct 3 11:28:32.009761 (XEN) PC: 0025f53c domain.c#idle_loop+0x130/0x1ac Oct 3 11:28:32.009788 (XEN) CPSR: 6003005a MODE:Hypervisor Oct 3 11:28:32.021721 (XEN) R0: 00000000 R1: 00000001 R2: 3fd06000 R3: 00000000 Oct 3 11:28:32.021754 (XEN) R4: 00000001 R5: 003000e0 R6: 00331324 R7: 00000002 Oct 3 11:28:32.033701 (XEN) R8: 00331104 R9: 00000001 R10:40e00000 R11:4000ff54 R12:fffffffc Oct 3 11:28:32.033735 (XEN) HYP: SP: 4000ff44 LR: 00225b7c Oct 3 11:28:32.045727 (XEN) Oct 3 11:28:32.045776 (XEN) VTCR_EL2: 80003558 Oct 3 11:28:32.045820 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 11:28:32.045864 (XEN) Oct 3 11:28:32.045902 (XEN) SCTLR_EL2: 30cd187f Oct 3 11:28:32.045944 (XEN) HCR_EL2: 007c663f Oct 3 11:28:32.057712 (XEN) TTBR0_EL2: 00000000ba004000 Oct 3 11:28:32.057788 (XEN) Oct 3 11:28:32.057831 (XEN) ESR_EL2: 07e00000 Oct 3 11:28:32.057880 (XEN) HPFAR_EL2: 00104810 Oct 3 11:28:32.057921 (XEN) HDFAR: e0807f00 Oct 3 11:28:32.057963 (XEN) HIFAR: c0a19dbc Oct 3 11:28:32.069722 (XEN) Oct 3 11:28:32.069780 (XEN) Xen stack trace from sp=4000ff44: Oct 3 11:28:32.069826 (XEN) 07e00000 00301290 00000001 4000ff3c 002681e0 00000000 00000000 00000000 Oct 3 11:28:32.081731 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 11:28:32.081791 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 11:28:32.093724 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 11:28:32.093776 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 11:28:32.105737 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 11:28:32.105807 (XEN) Xen call trace: Oct 3 11:28:32.117720 (XEN) [<0025f53c>] domain.c#idle_loop+0x130/0x1ac (PC) Oct 3 11:28:32.117773 (XEN) [<00225b7c>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 11:28:32.117821 (XEN) [<002681e0>] start_secondary+0x204/0x20c Oct 3 11:28:32.129682 (XEN) Oct 3 11:28:32.129711 Oct 3 11:28:33.858313 (XEN) 'e' pressed -> dumping event-channel info Oct 3 11:28:33.873742 (XEN) Event channel information for domain 0: Oct 3 11:28:33.873774 (XEN) Polling vCPUs: {} Oct 3 11:28:33.873798 (XEN) port Oct 3 11:28:33.875034 [p/m/s] Oct 3 11:28:33.885654 (XEN) 1 [0/0/ - ]: s=3 n=1 x=0 d=0 p=4 Oct 3 11:28:33.885684 (XEN) 2 [0/0/ - ]: s=5 n=0 x=0 v=2 Oct 3 11:28:33.885710 (XEN) 3 [0/0/ - ]: s=5 n=1 x=0 v=3 Oct 3 11:28:33.897680 (XEN) 4 [0/0/ - ]: s=3 n=0 x=0 d=0 p=1 Oct 3 11:28:33.897712 Oct 3 11:28:35.854432 (XEN) gnttab_usage_print_all [ key 'g' pressed Oct 3 11:28:35.869745 (XEN) -------- active -------- -------- shared -------- Oct 3 11:28:35.869779 (XEN) [ref] localdo Oct 3 11:28:35.871043 m mfn pin localdom gmfn flags Oct 3 11:28:35.881699 (XEN) grant-table for remote d0 (v1) Oct 3 11:28:35.881729 (XEN) 1 frames (64 max), 2 maptrack frames (1024 max) Oct 3 11:28:35.893664 (XEN) no active grant table entries Oct 3 11:28:35.893696 (XEN) gnttab_usage_print_all ] done Oct 3 11:28:35.893721 Oct 3 11:28:37.912084 Oct 3 11:28:39.666803 Oct 3 11:28:39.912750 (XEN) Physical memory information: Oct 3 11:28:39.929096 (XEN) Xen heap: 65124kB free Oct 3 11:28:39.929168 (XEN) heap[19]: 523340kB free Oct 3 11:28:39.929213 (XEN) heap[20]: 966428kB fr Oct 3 11:28:39.931537 ee Oct 3 11:28:39.940892 (XEN) Dom heap: 1489768kB free Oct 3 11:28:39.940948 Oct 3 11:28:41.916049 Oct 3 11:28:43.675623 Oct 3 11:28:43.898051 (XEN) sched_smt_power_savings: disabled Oct 3 11:28:43.912946 (XEN) NOW=1819700091708 Oct 3 11:28:43.912977 (XEN) Online Cpus: 0-1 Oct 3 11:28:43.913001 (XEN) Cpupool 0: Oct 3 11:28:43.913023 (XEN) Cpus: 0-1 Oct 3 11:28:43.913045 (XEN) Sched Oct 3 11:28:43.915476 uling granularity: cpu, 1 CPU per sched-resource Oct 3 11:28:43.924835 (XEN) Scheduler: SMP Credit Scheduler rev2 (credit2) Oct 3 11:28:43.924867 (XEN) Active queues: 1 Oct 3 11:28:43.924890 (XEN) default-weight = 256 Oct 3 11:28:43.936979 (XEN) Runqueue 0: Oct 3 11:28:43.937009 (XEN) ncpus = 2 Oct 3 11:28:43.937033 (XEN) cpus = 0-1 Oct 3 11:28:43.937073 (XEN) max_weight = 256 Oct 3 11:28:43.937098 (XEN) pick_bias = 0 Oct 3 11:28:43.948809 (XEN) instload = 0 Oct 3 11:28:43.948840 (XEN) aveload = 1572 (~0%) Oct 3 11:28:43.948865 (XEN) idlers: 2 Oct 3 11:28:43.948888 (XEN) tickled: 0 Oct 3 11:28:43.960775 (XEN) fully idle cores: 2 Oct 3 11:28:43.960775 (XEN) Domain info: Oct 3 11:28:43.960775 (XEN) Domain: 0 w 256 c 0 v 2 Oct 3 11:28:43.960775 (XEN) 1: [0.0] flags=0 cpu=1 credit=791408 [w=256] load=1499 (~0%) Oct 3 11:28:43.972831 (XEN) 2: [0.1] flags=0 cpu=0 credit=9744207 [w=256] load=115 (~0%) Oct 3 11:28:43.972872 (XEN) Runqueue 0: Oct 3 11:28:43.972896 (XEN) CPU[00] runq=0, sibling={0}, core={0-1} Oct 3 11:28:43.984780 (XEN) CPU[01] runq=0, sibling={1}, core={0-1} Oct 3 11:28:43.984780 (XEN) RUNQ: Oct 3 11:28:43.984780 (XEN) 0: [0.0] flags=0 cpu=1 credit=791408 [w=256] load=1445 (~0%) Oct 3 11:28:43.996787 (XEN) CPUs info: Oct 3 11:28:43.996787 (XEN) CPU[00] current=d[IDLE]v0, curr=d[IDLE]v0, prev=NULL Oct 3 11:28:43.996787 (XEN) CPU[01] current=d[IDLE]v1, curr=d[IDLE]v1, prev=NULL Oct 3 11:28:44.008785 Oct 3 11:28:45.905979 Oct 3 11:28:47.685269 Oct 3 11:28:47.900381 (XEN) Synced stime skew: max=125ns avg=125ns samples=1 current=125ns Oct 3 11:28:47.925012 (XEN) Synced cycles skew: max=0 avg=0 samples=1 current=0 Oct 3 11:28:47.925012 Oct 3 11:28:47.926192 Oct 3 11:28:49.928409 Oct 3 11:28:51.691065 Oct 3 11:28:51.936559 Oct 3 11:28:53.698242 Oct 3 11:28:53.915370 Oct 3 11:28:55.704036 Oct 3 11:29:05.908034 (XEN) 'q' pressed -> dumping domain info (now = 1841724272083) Oct 3 11:29:05.933693 (XEN) General information for domain 0: Oct 3 11:29:05.933725 (XEN) refcnt=3 dying=0 paus Oct 3 11:29:05.934977 e_count=0 Oct 3 11:29:05.945636 (XEN) nr_pages=131072 xenheap_pages=2 dirty_cpus={} max_pages=131072 Oct 3 11:29:05.945671 (XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=00000020 Oct 3 11:29:05.957681 (XEN) p2m mappings for domain 0 (vmid 1): Oct 3 11:29:05.957715 (XEN) 1G mappings: 0 (shattered 0) Oct 3 11:29:05.957740 (XEN) 2M mappings: 235 (shattered 21) Oct 3 11:29:05.969651 (XEN) 4K mappings: 5785 Oct 3 11:29:05.969683 (XEN) Rangesets belonging to domain 0: Oct 3 11:29:05.969708 (XEN) Interrupts { 32-72, 74, 77-79, 82-84, 86, 88-100, 103-104, 107-110, 114, 116-120, 123, 126-128, 138, 144, 146-147, 149-151, 156 } Oct 3 11:29:05.981671 (XEN) I/O Memory { 2020-2050, 3810-3811, 3830-3831, 3860-3861, 10000-10001, 10010-10045, 10050-10055, 10060-10061, 101b0-101b1, 101d0-101d1, 101e0-101e1, 10440-10441, 10800-10801, 10830-10831, 10850-10851, 10a60-10a61, 10d10-10d11, 11000-11010, 11200-11201, 11210-11211, 11400-11401, 11800-11805, 11c00-11c01, 11c10-11c11, 11d40-11d41, 11f20-11f21, 12000-12010, 12100-12101, 12110-12111, 12120-12121, 12130-12131, 12170-12171, 121a0-121a1, 121b0-121b1, 121d0-121d1, 12200-12201, 12210-12211, 12220-12221, 12230-12231, 12250-12251, 122f0-122f1, 12c00-12c01, 12c10-12c11, 12c30-12c31, 12c60-12c61, 12c70-12c71, 12c80-12c81, 12c90-12c91, 12ca0-12ca1, 12cb0-12cb1, 12cc0-12cc1, 12cd0-12cd1, 12ce0-12ce1, 12d10-12d11, 12d20-12d21, 12d30-12d31, 12d40-12d41, 12d60-12d61, 12d70-12d71, 12dd0-12dd1, 13260-13261, 13270-13271, 13280-13281, 13290-13291, 132a0-132a1, 132b0-132b1, 132c0-132c1, 132d0-132d1, 132e0-132e1, 132f0-132f1, 13400-13401, 13c40-13c41, 13c50-13c51, 13e00-13e01, 13e10-13e11, 13e20-13e21, 13e30-13e31, 13e80-13e81, 13e90-13e91, 13ea0-13ea1, 13eb0-13eb1, 14400-14440, 14450-14460, 14500-14510, 14530-145a0, 145b0-145b1, 14640-14641, 14650-14651 } Oct 3 11:29:06.077689 (XEN) NODE affinity for domain 0: [0] Oct 3 11:29:06.089662 (XEN) VCPU information and callbacks for domain 0: Oct 3 11:29:06.089695 (XEN) UNIT0 affinities: hard={0-1} soft={0-1} Oct 3 11:29:06.089721 (XEN) VCPU0: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 11:29:06.101664 (XEN) pause_count=0 pause_flags=1 Oct 3 11:29:06.101697 (XEN) GICH_LRs (vcpu 0) mask=0 Oct 3 11:29:06.101721 (XEN) VCPU_LR[0]=0 Oct 3 11:29:06.113676 (XEN) VCPU_LR[1]=0 Oct 3 11:29:06.113706 (XEN) VCPU_LR[2]=0 Oct 3 11:29:06.113730 (XEN) VCPU_LR[3]=0 Oct 3 11:29:06.113752 (XEN) No periodic timer Oct 3 11:29:06.113775 (XEN) UNIT1 affinities: hard={0-1} soft={0-1} Oct 3 11:29:06.125659 (XEN) VCPU1: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 11:29:06.125694 (XEN) pause_count=0 pause_flags=1 Oct 3 11:29:06.125719 (XEN) GICH_LRs (vcpu 1) mask=0 Oct 3 11:29:06.137656 (XEN) VCPU_LR[0]=0 Oct 3 11:29:06.137687 (XEN) VCPU_LR[1]=0 Oct 3 11:29:06.137710 (XEN) VCPU_LR[2]=0 Oct 3 11:29:06.137733 (XEN) VCPU_LR[3]=0 Oct 3 11:29:06.137755 (XEN) No periodic timer Oct 3 11:29:06.149634 (XEN) Notifying guest 0:0 (virq 1, port 0) Oct 3 11:29:06.149667 (XEN) Notifying guest 0:1 (virq 1, port 0) Oct 3 11:29:06.149692 Oct 3 11:29:17.949733 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 11:29:17.973793 Oct 3 11:29:17.973822 arndale-westfield login: Oct 3 11:29:17.975649 [ 1927.831935] sd 0:0:0:0: [sda] Synchronizing SCSI cache Oct 3 11:30:37.324889 [ 1927.840451] wake enabled for irq 119 (gpx1-4) Oct 3 11:30:37.336939 [ 1927.843441] wake enabled for irq 120 (gpx1-5) Oct 3 11:30:37.336939 [ 1927.847946] wake enabled for irq 121 (gpx1-6) Oct 3 11:30:37.348946 [ 1927.852293] wake enabled for irq 122 (gpx1-7) Oct 3 11:30:37.348946 [ 1927.856720] wake enabled for irq 123 (gpx2-0) Oct 3 11:30:37.360898 [ 1927.861168] wake enabled for irq 124 (gpx2-1) Oct 3 11:30:37.360898 [ 1927.865996] reboot: Resô Oct 3 11:30:37.700827 Oct 3 11:30:37.700827 Oct 3 11:30:37.700827 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 11:30:37.700827 Oct 3 11:30:37.700827 CPU: Exynos5250@1000MHz Oct 3 11:30:37.700827 Oct 3 11:30:37.700827 Board: Arndale Oct 3 11:30:37.700827 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 11:30:37.712887 ready Oct 3 11:30:37.712887 DRAM: 2 GiB Oct 3 11:30:37.712887 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 11:30:37.724878 trace: enabled Oct 3 11:30:37.760815 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 11:30:38.132862 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 11:30:38.180915 In: serial Oct 3 11:30:38.180915 Out: serial Oct 3 11:30:38.180915 Err: serial Oct 3 11:30:38.192910 SCSI: ARNDALE SCSI INIT Oct 3 11:30:38.192910 Target spinup took 0 ms. Oct 3 11:30:38.192910 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 11:30:38.204939 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 11:30:38.204939 Net: Net Initialization Skipped Oct 3 11:30:38.204939 No ethernet found. Oct 3 11:30:38.216910 Hostname: arndale-westfield Oct 3 11:30:38.216910 Hit any key to stop autoboot: 2  1  0 Oct 3 11:30:40.133001 (Re)start USB... Oct 3 11:30:40.133073 USB0: USB EHCI 1.00 Oct 3 11:30:40.144994 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 11:30:45.741868 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 11:30:45.741922 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 11:30:46.185825 Waiting for Ethernet connection... done. Oct 3 11:30:47.829800 BOOTP broadcast 1 Oct 3 11:30:47.841789 EHCI timed out on TD - token=0x8008d80 Oct 3 11:30:52.641837 BOOTP broadcast 2 Oct 3 11:30:52.641881 DHCP client bound to address 10.149.64.45 (5006 ms) Oct 3 11:30:52.641907 Using asx0 device Oct 3 11:30:52.641929 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 11:30:52.653782 Filename 'pxelinux.0'. Oct 3 11:30:52.653813 Load address: 0x43e00000 Oct 3 11:30:52.653836 Loading: *### Oct 3 11:30:52.677786 2.4 MiB/s Oct 3 11:30:52.677816 done Oct 3 11:30:52.677838 Bytes transferred = 42430 (a5be hex) Oct 3 11:30:52.677862 missing environment variable: pxeuuid Oct 3 11:30:52.677885 Retrieving file: pxelinux.cfg/0A95402D Oct 3 11:30:52.677909 Using asx0 device Oct 3 11:30:52.689788 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 11:30:52.689822 Filename 'pxelinux.cfg/0A95402D'. Oct 3 11:30:52.689846 Load address: 0x51000000 Oct 3 11:30:52.701788 Loading: *# Oct 3 11:30:52.701818 355.5 KiB/s Oct 3 11:30:52.701840 done Oct 3 11:30:52.701861 Bytes transferred = 728 (2d8 hex) Oct 3 11:30:52.701885 Config file found Oct 3 11:30:52.701907 Ignoring unknown command: serial Oct 3 11:30:52.701930 1: ^Overwrite Oct 3 11:30:52.713789 Retrieving file: /osstest/tmp//arndale-westfield--initrd.gz Oct 3 11:30:52.713823 Using asx0 device Oct 3 11:30:52.713846 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 11:30:52.725696 Filename '/osstest/tmp//arndale-westfield--initrd.gz'. Oct 3 11:30:52.725730 Load address: 0x43300000 Oct 3 11:30:52.725758 Loading: *################################################################# Oct 3 11:30:53.049646 ################################################################# Oct 3 11:30:53.373691 ################################################################# Oct 3 11:30:53.697692 ################################################################# Oct 3 11:30:54.033630 ################################################################# Oct 3 11:30:54.360789 ################################################################# Oct 3 11:30:54.684905 ################################################################# Oct 3 11:30:55.000838 ################################################################# Oct 3 11:30:55.324829 ################################################################# Oct 3 11:30:55.652844 ################################################################# Oct 3 11:30:55.976885 ################################################################# Oct 3 11:30:56.304829 ################################################################# Oct 3 11:30:56.632837 ################################################################# Oct 3 11:30:56.952970 ################################################################# Oct 3 11:30:57.276994 ################################################################# Oct 3 11:30:57.601000 ################################################################# Oct 3 11:30:57.924971 ################################################################# Oct 3 11:30:58.248843 ################################################################# Oct 3 11:30:58.576841 ################################################################# Oct 3 11:30:58.900835 ################################################################# Oct 3 11:30:59.224844 ################################################################# Oct 3 11:30:59.552845 ################################################################# Oct 3 11:30:59.876840 ################################################################# Oct 3 11:31:00.200861 ################################################################# Oct 3 11:31:00.516826 ################################################################# Oct 3 11:31:00.840839 ################################################################# Oct 3 11:31:01.176822 ################################################################# Oct 3 11:31:01.501004 ######################################## Oct 3 11:31:01.684793 2.7 MiB/s Oct 3 11:31:01.696821 done Oct 3 11:31:01.696821 Bytes transferred = 26339180 (191e76c hex) Oct 3 11:31:01.696821 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/linux Oct 3 11:31:01.706685 Using asx0 device Oct 3 11:31:01.706685 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 11:31:01.720823 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/linux'. Oct 3 11:31:01.720823 Load address: 0x42000000 Oct 3 11:31:01.720823 Loading: *################################################################# Oct 3 11:31:02.044990 ################################################################# Oct 3 11:31:02.368992 ################################################################# Oct 3 11:31:02.696827 ################################################################# Oct 3 11:31:03.012848 ################################################################# Oct 3 11:31:03.336844 ############################################# Oct 3 11:31:03.564840 2.7 MiB/s Oct 3 11:31:03.564840 done Oct 3 11:31:03.564840 Bytes transferred = 5427712 (52d200 hex) Oct 3 11:31:03.564840 append: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=55211 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 11:31:03.612923 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb Oct 3 11:31:03.612923 Using asx0 device Oct 3 11:31:03.624892 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 11:31:03.624892 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb'. Oct 3 11:31:03.636879 Load address: 0x43000000 Oct 3 11:31:03.636879 Loading: *#### Oct 3 11:31:03.648848 2.3 MiB/s Oct 3 11:31:03.648848 done Oct 3 11:31:03.648848 Bytes transferred = 46686 (b65e hex) Oct 3 11:31:03.660918 Kernel image @ 0x42000000 [ 0x000000 - 0x52d200 ] Oct 3 11:31:03.660918 ## Flattened Device Tree blob at 43000000 Oct 3 11:31:03.660918 Booting using the fdt blob at 0x43000000 Oct 3 11:31:03.672889 Loading Ramdisk to 4e6e1000, end 4ffff76c ... OK Oct 3 11:31:04.096872 Loading Device Tree to 4e6d2000, end 4e6e065d ... OK Oct 3 11:31:04.096872 Oct 3 11:31:04.108875 Starting kernel ...(fake run for tracing) Oct 3 11:31:04.108875 Oct 3 11:31:04.108875 Oct 3 11:31:04.108875 Starting kernel ... Oct 3 11:31:04.108875 Oct 3 11:31:04.120845 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 11:31:10.221015 [ 0.000000] Linux version 6.1.0-25-armmp (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.106-3 (2024-08-26) Oct 3 11:31:10.232953 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 11:31:10.245010 [ 0.000000] CPU: div instructions available: patching division code Oct 3 11:31:10.256870 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 11:31:10.256870 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 11:31:10.268870 [ 0.000000] Memory policy: Data cache writealloc Oct 3 11:31:10.268870 [ 0.000000] efi: UEFI not found. Oct 3 11:31:10.268870 [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 Oct 3 11:31:10.280881 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 11:31:10.280881 [ 0.000000] Zone ranges: Oct 3 11:31:10.280881 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 11:31:10.292885 [ 0.000000] Normal empty Oct 3 11:31:10.292885 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 11:31:10.305023 [ 0.000000] Movable zone start for each node Oct 3 11:31:10.305091 [ 0.000000] Early memory node ranges Oct 3 11:31:10.305136 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 11:31:10.316883 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 11:31:10.316883 [ 0.000000] percpu: Embedded 18 pages/cpu s44692 r8192 d20844 u73728 Oct 3 11:31:10.328882 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 11:31:10.328882 [ 0.000000] Kernel command line: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=55211 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 11:31:10.376895 [ 0.000000] Unknown kernel command line parameters "preseed --- vga=normal auto=true hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=55211 domain=test-lab.xenproject.org", will be passed to user space. Oct 3 11:31:10.416872 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 11:31:10.428888 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 11:31:10.428888 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 11:31:10.440888 [ 0.000000] Memory: 2015968K/2097152K available (11264K kernel code, 1696K rwdata, 3724K rodata, 2048K init, 376K bss, 64800K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 11:31:10.452870 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 11:31:10.464872 [ 0.000000] ftrace: allocating 39612 entries in 117 pages Oct 3 11:31:10.464872 [ 0.000000] ftrace: allocated 117 pages with 5 groups Oct 3 11:31:10.476888 [ 0.000000] trace event string verifier disabled Oct 3 11:31:10.476888 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 11:31:10.476888 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 11:31:10.488892 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 11:31:10.488892 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 11:31:10.500877 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 11:31:10.500877 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 11:31:10.512887 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 11:31:10.512887 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 11:31:10.522890 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 11:31:10.522960 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 11:31:10.536908 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 11:31:10.536908 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 11:31:10.548890 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 11:31:10.560885 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 11:31:10.560885 [ 0.002609] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 11:31:10.572888 [ 0.002623] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 11:31:10.584873 [ 0.002637] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 11:31:10.584873 [ 0.002649] Ignoring duplicate/late registration of read_current_timer delay Oct 3 11:31:10.596886 [ 0.003007] Console: colour dummy device 80x30 Oct 3 11:31:10.596886 [ 0.003047] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 11:31:10.608885 [ 0.003061] CPU: Testing write buffer coherency: ok Oct 3 11:31:10.620846 [ 0.003104] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 11:31:10.620846 [ 0.003111] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 11:31:10.632884 [ 0.003118] pid_max: default: 32768 minimum: 301 Oct 3 11:31:10.632884 [ 0.003478] LSM: Security Framework initializing Oct 3 11:31:10.644898 [ 0.003550] landlock: Up and running. Oct 3 11:31:10.644898 [ 0.003555] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 11:31:10.644898 [ 0.003739] AppArmor: AppArmor initialized Oct 3 11:31:10.656884 [ 0.003751] TOMOYO Linux initialized Oct 3 11:31:10.656884 [ 0.003797] LSM support for eBPF active Oct 3 11:31:10.656884 [ 0.004039] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 11:31:10.668888 [ 0.004052] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 11:31:10.680888 [ 0.005478] /cpus/cpu@0 missing clock-frequency property Oct 3 11:31:10.680888 [ 0.005505] /cpus/cpu@1 missing clock-frequency property Oct 3 11:31:10.692890 [ 0.005519] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 11:31:10.692890 [ 0.006480] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 11:31:10.704835 [ 0.006487] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 11:31:10.704835 [ 0.006591] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 11:31:10.716857 [ 0.006596] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 11:31:10.716857 [ 0.006741] Setting up static identity map for 0x40300000 - 0x403000ac Oct 3 11:31:10.728854 [ 0.007895] rcu: Hierarchical SRCU implementation. Oct 3 11:31:10.728854 [ 0.007901] rcu: Max phase no-delay instances is 1000. Oct 3 11:31:10.740850 [ 0.010027] EFI services will not be available. Oct 3 11:31:10.740850 [ 0.010370] smp: Bringing up secondary CPUs ... Oct 3 11:31:10.740850 [ 0.011109] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 11:31:10.752891 [ 0.011121] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 11:31:10.764826 [ 0.011251] smp: Brought up 1 node, 2 CPUs Oct 3 11:31:10.764826 [ 0.011260] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 11:31:10.764826 [ 0.011267] CPU: All CPU(s) started in HYP mode. Oct 3 11:31:10.776838 [ 0.011271] CPU: Virtualization extensions available. Oct 3 11:31:10.776838 [ 0.011897] devtmpfs: initialized Oct 3 11:31:10.788863 [ 0.023242] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 11:31:10.788863 [ 0.023474] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 11:31:10.800823 [ 0.023500] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 11:31:10.812817 [ 0.024024] pinctrl core: initialized pinctrl subsystem Oct 3 11:31:10.812817 [ 0.024724] DMI not present or invalid. Oct 3 11:31:10.812817 [ 0.025400] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 11:31:10.824887 [ 0.030786] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 11:31:10.824887 [ 0.032330] audit: initializing netlink subsys (disabled) Oct 3 11:31:10.836844 [ 0.032532] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 Oct 3 11:31:10.836844 [ 0.033681] thermal_sys: Registered thermal governor 'fair_share' Oct 3 11:31:10.848883 [ 0.033688] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 11:31:10.848883 [ 0.033693] thermal_sys: Registered thermal governor 'step_wise' Oct 3 11:31:10.860900 [ 0.033697] thermal_sys: Registered thermal governor 'user_space' Oct 3 11:31:10.860900 [ 0.033702] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 11:31:10.872866 [ 0.034077] No ATAGs? Oct 3 11:31:10.872866 [ 0.034143] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 11:31:10.884881 [ 0.034152] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 11:31:10.884881 [ 0.035235] Serial: AMBA PL011 UART driver Oct 3 11:31:10.896880 [ 0.084760] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 11:31:10.896880 [ 0.091795] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 11:31:10.908852 [ 0.102791] iommu: Default domain type: Translated Oct 3 11:31:10.908852 [ 0.102799] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 11:31:10.920871 [ 0.103773] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 11:31:10.932854 [ 0.104312] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 11:31:10.932854 [ 0.104324] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 11:31:10.932854 [ 0.104859] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 11:31:10.944832 [ 0.104890] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 11:31:10.956883 [ 0.105071] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 11:31:10.956883 [ 0.105424] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 11:31:10.968827 [ 0.105434] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 11:31:10.968827 [ 0.105831] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 11:31:10.980883 [ 0.106119] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 11:31:10.980883 [ 0.106128] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 11:31:10.992903 [ 0.106406] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 11:31:10.992903 [ 0.106507] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 11:31:10.992903 [ 0.106516] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 11:31:11.004879 [ 0.106717] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 11:31:11.004879 [ 0.106914] pps_core: LinuxPPS API ver. 1 registered Oct 3 11:31:11.017011 [ 0.106919] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 11:31:11.017093 [ 0.106935] PTP clock support registered Oct 3 11:31:11.028843 [ 0.108593] NetLabel: Initializing Oct 3 11:31:11.028843 [ 0.108599] NetLabel: domain hash size = 128 Oct 3 11:31:11.028843 [ 0.108605] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 11:31:11.040866 [ 0.108659] NetLabel: unlabeled traffic allowed by default Oct 3 11:31:11.040866 [ 0.108841] vgaarb: loaded Oct 3 11:31:11.052877 [ 0.109495] clocksource: Switched to clocksource mct-frc Oct 3 11:31:11.052877 [ 0.178695] VFS: Disk quotas dquot_6.6.0 Oct 3 11:31:11.052877 [ 0.178786] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 11:31:11.064870 [ 0.179535] AppArmor: AppArmor Filesystem Enabled Oct 3 11:31:11.064870 [ 0.188641] NET: Registered PF_INET protocol family Oct 3 11:31:11.076886 [ 0.188851] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 11:31:11.076886 [ 0.190481] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 11:31:11.088889 [ 0.190573] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 11:31:11.100889 [ 0.190596] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 11:31:11.100889 [ 0.190691] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 11:31:11.112885 [ 0.190920] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 11:31:11.112885 [ 0.191141] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 11:31:11.124889 [ 0.191226] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 11:31:11.136889 [ 0.191265] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 11:31:11.136889 [ 0.191468] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 11:31:11.148990 [ 0.191503] NET: Registered PF_XDP protocol family Oct 3 11:31:11.149056 [ 0.191513] PCI: CLS 0 bytes, default 64 Oct 3 11:31:11.149102 [ 0.192044] Trying to unpack rootfs image as initramfs... Oct 3 11:31:11.160892 [ 0.192448] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 11:31:11.160892 [ 0.192679] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 11:31:11.172889 [ 0.194309] Initialise system trusted keyrings Oct 3 11:31:11.184887 [ 0.194390] Key type blacklist registered Oct 3 11:31:11.184887 [ 0.194631] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 11:31:11.184887 [ 0.201828] zbud: loaded Oct 3 11:31:11.196866 [ 0.203010] integrity: Platform Keyring initialized Oct 3 11:31:11.196866 [ 0.203039] integrity: Machine keyring initialized Oct 3 11:31:11.196866 [ 0.203047] Key type asymmetric registered Oct 3 11:31:11.208883 [ 0.203054] Asymmetric key parser 'x509' registered Oct 3 11:31:11.208883 [ 1.560337] Freeing initrd memory: 25724K Oct 3 11:31:11.220877 [ 1.571814] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 11:31:11.220877 [ 1.572100] bounce: pool size: 64 pages Oct 3 11:31:11.220877 [ 1.572263] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 11:31:11.232885 [ 1.572428] io scheduler mq-deadline registered Oct 3 11:31:11.232885 [ 1.577600] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 11:31:11.245018 [ 1.598438] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 11:31:11.256885 [ 1.598449] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 11:31:11.256885 [ 1.600739] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 11:31:11.268883 [ 1.600749] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 11:31:11.280873 [ 1.601623] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 11:31:11.280873 [ 1.601632] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 11:31:11.292884 [ 1.602455] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 11:31:11.304884 [ 1.602465] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 11:31:11.316885 [ 1.604789] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 11:31:11.316885 [ 1.607638] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 11:31:11.328885 [ 1.610415] Serial: AMBA driver Oct 3 11:31:11.328885 [ 1.610655] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 11:31:11.340887 [ 1.611150] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 11:31:11.352890 [ 1.611608] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 11:31:11.352890 [ 2.749714] printk: console [ttySAC2] enabled Oct 3 11:31:11.364879 [ 2.754526] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 11:31:11.364879 [ 2.765182] STM32 USART driver initialized Oct 3 11:31:11.376844 [ 2.779276] mousedev: PS/2 mouse device common for all mice Oct 3 11:31:11.388843 [ 2.810590] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 11:31:11.424858 [ 2.819250] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T11:31:08 UTC (1727955068) Oct 3 11:31:11.436977 [ 2.829074] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 11:31:11.436977 [ 2.836509] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 11:31:11.448836 [ 2.844495] NET: Registered PF_INET6 protocol family Oct 3 11:31:11.460751 [ 2.858064] Segment Routing with IPv6 Oct 3 11:31:11.472999 [ 2.860297] In-situ OAM (IOAM) with IPv6 Oct 3 11:31:11.473064 [ 2.864268] mip6: Mobile IPv6 Oct 3 11:31:11.473109 [ 2.867166] NET: Registered PF_PACKET protocol family Oct 3 11:31:11.484895 [ 2.872421] mpls_gso: MPLS GSO support Oct 3 11:31:11.484895 [ 2.876525] ThumbEE CPU extension supported. Oct 3 11:31:11.484895 [ 2.880161] Registering SWP/SWPB emulation handler Oct 3 11:31:11.500853 [ 2.885428] registered taskstats version 1 Oct 3 11:31:11.500853 [ 2.889041] Loading compiled-in X.509 certificates Oct 3 11:31:11.500853 [ 3.349319] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 11:31:11.960874 [ 3.356674] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 11:31:11.976888 [ 3.367691] zswap: loaded using pool lzo/zbud Oct 3 11:31:11.976888 [ 3.371699] Key type .fscrypt registered Oct 3 11:31:11.976888 [ 3.374991] Key type fscrypt-provisioning registered Oct 3 11:31:11.988898 [ 3.388712] Key type encrypted registered Oct 3 11:31:12.000872 [ 3.391311] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 11:31:12.000872 [ 3.396809] ima: No TPM chip found, activating TPM-bypass! Oct 3 11:31:12.012870 [ 3.402229] ima: Allocated hash algorithm: sha256 Oct 3 11:31:12.012870 [ 3.407030] ima: No architecture policies found Oct 3 11:31:12.012870 [ 3.411461] evm: Initialising EVM extended attributes: Oct 3 11:31:12.024913 [ 3.416533] evm: security.selinux Oct 3 11:31:12.024913 [ 3.419822] evm: security.SMACK64 (disabled) Oct 3 11:31:12.036888 [ 3.424073] evm: security.SMACK64EXEC (disabled) Oct 3 11:31:12.036888 [ 3.428672] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 11:31:12.036888 [ 3.433707] evm: security.SMACK64MMAP (disabled) Oct 3 11:31:12.048883 [ 3.438307] evm: security.apparmor Oct 3 11:31:12.048883 [ 3.441692] evm: security.ima Oct 3 11:31:12.048883 [ 3.444631] evm: security.capability Oct 3 11:31:12.060832 [ 3.448202] evm: HMAC attrs: 0x1 Oct 3 11:31:12.060832 [ 4.036237] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 11:31:12.645759 [ 4.042234] clk: Disabling unused clocks Oct 3 11:31:12.645820 [ 4.055890] Freeing unused kernel image (initmem) memory: 2048K Oct 3 11:31:12.669692 [ 4.060748] Checked W+X mappings: passed, no W+X pages found Oct 3 11:31:12.669726 [ 4.066019] Run /init as init process Oct 3 11:31:12.669751 [ 4.626021] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 11:31:13.233691 [ 4.684597] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 11:31:13.293723 [ 4.692464] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 11:31:13.305740 [ 4.708590] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 11:31:13.317783 [ 4.716643] usbcore: registered new interface driver usbfs Oct 3 11:31:13.329765 [ 4.725414] usbcore: registered new interface driver hub Oct 3 11:31:13.329799 [ 4.729383] usbcore: registered new device driver usb Oct 3 11:31:13.341754 [ 4.741391] phy phy-12130000.phy.1: phy_power_on was called before phy_init Oct 3 11:31:13.353789 [ 4.748404] phy phy-12130000.phy.1: phy_power_on was called before phy_init Oct 3 11:31:13.353824 [ 4.753973] exynos-ohci 12120000.usb: USB Host Controller Oct 3 11:31:13.365790 [ 4.755035] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 11:31:13.365823 [ 4.759341] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Oct 3 11:31:13.377818 [ 4.772801] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Oct 3 11:31:13.389779 [ 4.773806] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Oct 3 11:31:13.389814 [ 4.788723] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Oct 3 11:31:13.401717 [ 4.810018] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 11:31:13.413750 [ 4.816136] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 11:31:13.425801 [ 4.822991] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 11:31:13.437785 [ 4.830161] usb usb2: Product: EHCI Host Controller Oct 3 11:31:13.437818 [ 4.835012] usb usb2: Manufacturer: Linux 6.1.0-25-armmp ehci_hcd Oct 3 11:31:13.449751 [ 4.841096] usb usb2: SerialNumber: 12110000.usb Oct 3 11:31:13.449784 [ 4.869213] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 11:31:13.473750 [ 4.875993] hub 2-0:1.0: USB hub found Oct 3 11:31:13.485780 [ 4.878386] hub 2-0:1.0: 3 ports detected Oct 3 11:31:13.485812 [ 4.885276] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 11:31:13.497798 [ 4.892137] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 11:31:13.497835 [ 4.899303] usb usb1: Product: USB Host Controller Oct 3 11:31:13.509788 [ 4.904091] usb usb1: Manufacturer: Linux 6.1.0-25-armmp ohci_hcd Oct 3 11:31:13.509822 [ 4.910146] usb usb1: SerialNumber: 12120000.usb Oct 3 11:31:13.521738 [ 4.940704] hub 1-0:1.0: USB hub found Oct 3 11:31:13.545756 [ 4.949736] hub 1-0:1.0: 3 ports detected Oct 3 11:31:13.557741 [ 4.961728] usb3503 usb-hub: switched to HUB mode Oct 3 11:31:13.569774 [ 4.964962] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 11:31:13.569808 [ 5.262526] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 11:31:13.869874 [ 5.266585] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 11:31:13.881887 [ 5.274733] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 11:31:13.881958 [ 5.283623] xhci-hcd xhci-hcd.2.auto: irq 108, io mem 0x12000000 Oct 3 11:31:13.893867 [ 5.289598] usb 2-3: new high-speed USB device number 2 using exynos-ehci Oct 3 11:31:13.905915 [ 5.293959] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 11:31:13.905978 [ 5.301842] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 11:31:13.917869 [ 5.309533] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 11:31:13.917932 [ 5.316126] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 11:31:13.929776 [ 5.324206] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 11:31:13.929813 [ 5.331397] usb usb3: Product: xHCI Host Controller Oct 3 11:31:13.941892 [ 5.336255] usb usb3: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 11:31:13.941956 [ 5.342344] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 11:31:13.953869 [ 5.347790] hub 3-0:1.0: USB hub found Oct 3 11:31:13.953928 [ 5.350993] hub 3-0:1.0: 1 port detected Oct 3 11:31:13.953973 [ 5.355337] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 11:31:13.965883 [ 5.363053] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 11:31:13.977881 [ 5.371163] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 11:31:13.977950 [ 5.378363] usb usb4: Product: xHCI Host Controller Oct 3 11:31:13.989808 [ 5.383224] usb usb4: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 11:31:13.989866 [ 5.389293] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 11:31:14.001864 [ 5.394864] hub 4-0:1.0: USB hub found Oct 3 11:31:14.001923 [ 5.397940] hub 4-0:1.0: 1 port detected Oct 3 11:31:14.001969 [ 5.453983] usb 2-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Oct 3 11:31:14.061907 [ 5.460720] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 3 11:31:14.073877 [ 5.468543] hub 2-3:1.0: USB hub found Oct 3 11:31:14.073936 [ 5.471729] hub 2-3:1.0: 3 ports detected Oct 3 11:31:14.073982 Starting system log daemon: syslogd, klogd. Oct 3 11:31:14.217799 /var/run/utmp: No such file or directory Oct 3 11:31:16.053746 [?1h=(B   Oct 3 11:31:16.101750  Oct 3 11:31:16.113739 [  (-*) ][ Oct 03 11:31 ] Oct 3 11:31:16.125746 [  (0*start) ][ Oct 03 11:31 ] Oct 3 11:31:16.137711 [  (0*start) ][ Oct 03 11:31 ] Oct 3 11:31:16.149753 [  (0*start) ][ Oct 03 11:31 ] Oct 3 11:31:16.161756 [  (0*start) ][ Oct 03 11:31 ]                        [  (0*start) ][ Oct 03 11:31 ][  (0*start) ][ Oct 03 11:31 ] Oct 3 11:31:16.221845 [ 0- start  (2*shell) ][ Oct 03 11:31 ] Oct 3 11:31:16.233756 [ 0- start  (2*shell) ][ Oct 03 11:31 ] Oct 3 11:31:16.245754 [ 0- start  (2*shell) ][ Oct 03 11:31 ] Oct 3 11:31:16.257755 [ 0- start  (2*shell) ][ Oct 03 11:31 ]                        [ 0- start  (2*shell) ][ Oct 03 11:31 ][ 0- start  (2*shell) ][ Oct 03 11:31 ] Oct 3 11:31:16.317752 [ 0 start 2- shell  (3*shell) ][ Oct 03 11:31 ] Oct 3 11:31:16.329751 [ 0 start 2- shell  (3*shell) ][ Oct 03 11:31 ] Oct 3 11:31:16.341757 [ 0 start 2- shell  (3*shell) ][ Oct 03 11:31 ] Oct 3 11:31:16.353757 [ 0 start 2- shell  (3*shell) ][ Oct 03 11:31 ]                        [ 0 start 2- shell  (3*shell) ][ Oct 03 11:31 ][ 0 start 2- shell  (3*shell) ][ Oct 03 11:31 ] Oct 3 11:31:16.413765 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 11:31 ] Oct 3 11:31:16.425749 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 11:31 ] Oct 3 11:31:16.437756 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 11:31 ] Oct 3 11:31:16.449762 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 11:31 ]                        [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 11:31 ][ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 11:31 ] Oct 3 11:31:16.509790 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 11:31 ] Oct 3 11:31:16.521794 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 11:31 ] Oct 3 11:31:16.533754 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 11:31 ] Oct 3 11:31:16.545764 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 11:31 ]                        [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 11:31 ][ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 11:31 ] Oct 3 11:31:16.605760 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 11:31 ] Oct 3 11:31:16.617756 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 11:31 ] Oct 3 11:31:16.629797 [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 11:31 ] Oct 3 11:31:17.085704 Detecting network hardware ... 2%... 95%... 100% Oct 3 11:31:18.813681 Detecting link on eth0; please wait... ... 0%... 10%... 20% Oct 3 11:31:23.689738 Waiting for link-local address... ... 8%... 16%... 25%... 33%... 41%... 100% Oct 3 11:31:24.985635 Attempting IPv6 autoconfiguration... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 75%... 83%... 91%... 100% Oct 3 11:31:31.045613 Configuring the network with DHCP ... 0%... 100% Oct 3 11:31:34.209617 Checking the Debian archive mirror ... 25%... 50%... 75%... 100% Oct 3 11:31:42.393640 Loading additional components ... 0%... 10%... 20%... 30%... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 11:32 ]... 50%... 60%... 70%... 80%... 90%... 100% Oct 3 11:32:15.469779 Setting up the clock ... 0%... 100% Oct 3 11:32:18.220868 Loading additional components ... 50%... 100% Oct 3 11:32:19.876817 Detecting disks and all other hardware ... 2%... 95%... 100% Oct 3 11:32:24.479898 Loading additional components ... 12%... 25%... 37%... 50%... 62%... 75%... 87%... 100% Oct 3 11:32:31.477025 Loading additional components ... 25%... 50%... 75%... 100% Oct 3 11:32:33.841019 Starting up the partitioner ... 4%... 13%... 21%... 30%... 43%... 52%... 60%... 73%... 82%... 91%... 100% Oct 3 11:32:47.237826 Guided partitioning ... 16%... 33%... 50%... 66%... 83%... 100% Oct 3 11:32:55.505597 Starting up the partitioner ... 4%... 12%... 20%... 32%... 40%... 52%... 60%... 72%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 11:33 ]... 80%... 92%... 100% Oct 3 11:33:06.469725 Partitions formatting ... 33% Oct 3 11:33:15.265596 Partitions formatting Oct 3 11:33:24.425805 Partitions formatting Installing the base system ... 0%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 11:34 ]... 17%... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 11:35 ]... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 11:36 ]... 48%... 50%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 11:37 ]...  Oct 3 11:37:11.100714  60%... 70%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 11:38 ]... 79%... 83%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 11:39 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 11:40 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 11:41 ]... 91%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 11:42 ]... 100% Oct 3 11:42:50.661740 Configuring apt ... 7%... 14%... 14%... 21%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 11:43 ]... 35%... 42%... 50%... 60%... 71%. Oct 3 11:43:27.853574 ... 82%... 92%... 100% Oct 3 11:43:30.373672 Select and install software ... 1%... 10%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 11:44 ]... 13%... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 11:45 ]... 40%... 50%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 11:46 ]... Oct 3 11:46:20.757669 . 60%... 70%... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 11:47 ]... 88%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 11:48 ]... 90%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 11:49 ]... 94%... 100% Oct 3 11:49:23.628838 Finishing the installation ... 4%... 12%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 11:50 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 11:51 ]... 16%... 20%... 32%... 40%... 44%... Oct 3 11:51:33.417742  52%... 60%... 72%... 80%... 92% The system is going down NOW! Sent SIGKILL to all processes Oct 3 11:51:44.628845 Requesting system reboot Oct 3 11:51:44.628845 [ 1237.059399] reboot: Reó Oct 3 11:51:45.988867 Oct 3 11:51:45.988867 Oct 3 11:51:45.988867 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 11:51:46.000880 Oct 3 11:51:46.000880 CPU: Exynos5250@1000MHz Oct 3 11:51:46.000880 Oct 3 11:51:46.000880 Board: Arndale Oct 3 11:51:46.000880 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 11:51:46.012821 ready Oct 3 11:51:46.012821 DRAM: 2 GiB Oct 3 11:51:46.012821 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 11:51:46.024832 trace: enabled Oct 3 11:51:46.060820 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 11:51:46.420849 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 11:51:46.480870 In: serial Oct 3 11:51:46.480870 Out: serial Oct 3 11:51:46.480870 Err: serial Oct 3 11:51:46.480870 SCSI: ARNDALE SCSI INIT Oct 3 11:51:46.492884 Target spinup took 0 ms. Oct 3 11:51:46.492884 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 11:51:46.504895 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 11:51:46.504895 Net: Net Initialization Skipped Oct 3 11:51:46.504895 No ethernet found. Oct 3 11:51:46.504895 Hostname: arndale-westfield Oct 3 11:51:46.516822 Hit any key to stop autoboot: 2  1  0 Oct 3 11:51:48.432977 (Re)start USB... Oct 3 11:51:48.456755 USB0: USB EHCI 1.00 Oct 3 11:51:48.456755 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 11:51:54.033776 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 11:51:54.047122 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 11:51:54.489714 Waiting for Ethernet connection... done. Oct 3 11:51:56.133771 BOOTP broadcast 1 Oct 3 11:51:56.133868 BOOTP broadcast 2 Oct 3 11:51:57.405696 DHCP client bound to address 10.149.64.45 (1381 ms) Oct 3 11:51:57.465737 Using asx0 device Oct 3 11:51:57.465792 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 11:51:57.477706 Filename 'pxelinux.0'. Oct 3 11:51:57.477762 Load address: 0x43e00000 Oct 3 11:51:57.477807 Loading: *### Oct 3 11:51:57.489673 2.2 MiB/s Oct 3 11:51:57.489728 done Oct 3 11:51:57.489769 Bytes transferred = 42430 (a5be hex) Oct 3 11:51:57.501747 missing environment variable: pxeuuid Oct 3 11:51:57.501806 Retrieving file: pxelinux.cfg/0A95402D Oct 3 11:51:57.501853 Using asx0 device Oct 3 11:51:57.501895 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 11:51:57.513748 Filename 'pxelinux.cfg/0A95402D'. Oct 3 11:51:57.513807 Load address: 0x51000000 Oct 3 11:51:57.513852 Loading: *# Oct 3 11:51:57.525736 20.5 KiB/s Oct 3 11:51:57.525792 done Oct 3 11:51:57.525832 Bytes transferred = 65 (41 hex) Oct 3 11:51:57.525878 Config file found Oct 3 11:51:57.525920 Ignoring unknown command: serial Oct 3 11:51:57.525964 1: local Oct 3 11:51:57.526003 scanning bus for devices... Oct 3 11:51:57.537674 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 11:51:57.561739 Type: Hard Disk Oct 3 11:51:57.561796 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 11:51:57.561883 Found 1 device(s). Oct 3 11:51:57.561927 Oct 3 11:51:57.561965 SCSI device 0: Oct 3 11:51:57.562005 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 11:51:57.573754 Type: Hard Disk Oct 3 11:51:57.573809 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 11:51:57.585698 ... is now current device Oct 3 11:51:57.585760 Scanning scsi 0... Oct 3 11:51:57.585824 Found U-Boot script /boot.scr Oct 3 11:51:57.705654 639 bytes read in 42 ms (14.6 KiB/s) Oct 3 11:51:57.741697 ## Executing script at 50000000 Oct 3 11:51:57.753710 Loading dtbs/exynos5250-arndale.dtb Oct 3 11:51:57.753768 46686 bytes read in 130 ms (350.6 KiB/s) Oct 3 11:51:57.897729 Loading vmlinuz-6.1.0-25-armmp-lpae Oct 3 11:51:57.897787 5509632 bytes read in 185 ms (28.4 MiB/s) Oct 3 11:51:58.101696 Loading initrd.img-6.1.0-25-armmp-lpae Oct 3 11:51:58.101755 25731985 bytes read in 1899 ms (12.9 MiB/s) Oct 3 11:51:59.937726 Booting Oct 3 11:51:59.937787 Kernel image @ 0x42000000 [ 0x000000 - 0x541200 ] Oct 3 11:51:59.949809 ## Flattened Device Tree blob at 43000000 Oct 3 11:51:59.949869 Booting using the fdt blob at 0x43000000 Oct 3 11:51:59.949915 Loading Ramdisk to 4e775000, end 4ffff391 ... OK Oct 3 11:52:00.369696 Loading Device Tree to 4e766000, end 4e77465d ... OK Oct 3 11:52:00.369759 Oct 3 11:52:00.381695 Starting kernel ...(fake run for tracing) Oct 3 11:52:00.381756 Oct 3 11:52:00.381795 Oct 3 11:52:00.393673 Starting kernel ... Oct 3 11:52:00.393731 Oct 3 11:52:00.393770 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 11:52:06.549808 [ 0.000000] Linux version 6.1.0-25-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.106-3 (2024-08-26) Oct 3 11:52:06.561774 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=30c5387d Oct 3 11:52:06.573742 [ 0.000000] CPU: div instructions available: patching division code Oct 3 11:52:06.573808 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 11:52:06.585744 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 11:52:06.585827 [ 0.000000] Memory policy: Data cache writealloc Oct 3 11:52:06.597732 [ 0.000000] efi: UEFI not found. Oct 3 11:52:06.597791 [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000 Oct 3 11:52:06.597841 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 11:52:06.609759 [ 0.000000] Zone ranges: Oct 3 11:52:06.609817 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 11:52:06.609867 [ 0.000000] Normal empty Oct 3 11:52:06.621763 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 11:52:06.621827 [ 0.000000] Movable zone start for each node Oct 3 11:52:06.633768 [ 0.000000] Early memory node ranges Oct 3 11:52:06.633852 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 11:52:06.633929 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 11:52:06.645788 [ 0.000000] percpu: Embedded 18 pages/cpu s44820 r8192 d20716 u73728 Oct 3 11:52:06.645875 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 11:52:06.657797 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=ttySAC2,115200n8 Oct 3 11:52:06.669800 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 11:52:06.681751 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 11:52:06.681848 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 11:52:06.693778 [ 0.000000] Memory: 2015504K/2097152K available (12288K kernel code, 1717K rwdata, 3748K rodata, 2048K init, 383K bss, 65264K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 11:52:06.705797 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 11:52:06.717748 [ 0.000000] ftrace: allocating 39996 entries in 118 pages Oct 3 11:52:06.717811 [ 0.000000] ftrace: allocated 118 pages with 5 groups Oct 3 11:52:06.717859 [ 0.000000] trace event string verifier disabled Oct 3 11:52:06.729779 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 11:52:06.729839 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 11:52:06.741741 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 11:52:06.741801 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 11:52:06.753783 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 11:52:06.753841 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 11:52:06.765641 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 11:52:06.765675 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 11:52:06.777757 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 11:52:06.777822 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 11:52:06.789709 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 11:52:06.789744 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 11:52:06.801745 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 11:52:06.813735 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 11:52:06.813804 [ 0.002630] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 11:52:06.825755 [ 0.002644] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 11:52:06.837764 [ 0.002659] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 11:52:06.837835 [ 0.002671] Ignoring duplicate/late registration of read_current_timer delay Oct 3 11:52:06.849753 [ 0.003037] Console: colour dummy device 80x30 Oct 3 11:52:06.849813 [ 0.003079] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 11:52:06.861745 [ 0.003092] CPU: Testing write buffer coherency: ok Oct 3 11:52:06.861805 [ 0.003134] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 11:52:06.873760 [ 0.003142] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 11:52:06.885741 [ 0.003149] pid_max: default: 32768 minimum: 301 Oct 3 11:52:06.885802 [ 0.003518] LSM: Security Framework initializing Oct 3 11:52:06.897747 [ 0.003591] landlock: Up and running. Oct 3 11:52:06.897806 [ 0.003596] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 11:52:06.897859 [ 0.003785] AppArmor: AppArmor initialized Oct 3 11:52:06.909766 [ 0.003797] TOMOYO Linux initialized Oct 3 11:52:06.909825 [ 0.003843] LSM support for eBPF active Oct 3 11:52:06.909871 [ 0.004091] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 11:52:06.921763 [ 0.004104] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 11:52:06.933738 [ 0.005514] /cpus/cpu@0 missing clock-frequency property Oct 3 11:52:06.933799 [ 0.005541] /cpus/cpu@1 missing clock-frequency property Oct 3 11:52:06.933847 [ 0.005554] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 11:52:06.945754 [ 0.006508] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 11:52:06.957742 [ 0.006515] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 11:52:06.957805 [ 0.006620] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 11:52:06.969674 [ 0.006626] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 11:52:06.969735 [ 0.006765] Setting up static identity map for 0x40400000 - 0x404000ac Oct 3 11:52:06.981767 [ 0.007930] rcu: Hierarchical SRCU implementation. Oct 3 11:52:06.981830 [ 0.007936] rcu: Max phase no-delay instances is 1000. Oct 3 11:52:06.993733 [ 0.010063] EFI services will not be available. Oct 3 11:52:06.993794 [ 0.010407] smp: Bringing up secondary CPUs ... Oct 3 11:52:06.993842 [ 0.011150] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 11:52:07.005735 [ 0.011162] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 11:52:07.017773 [ 0.011296] smp: Brought up 1 node, 2 CPUs Oct 3 11:52:07.017834 [ 0.011304] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 11:52:07.017885 [ 0.011312] CPU: All CPU(s) started in HYP mode. Oct 3 11:52:07.029765 [ 0.011315] CPU: Virtualization extensions available. Oct 3 11:52:07.029827 [ 0.012170] devtmpfs: initialized Oct 3 11:52:07.029872 [ 0.023138] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 11:52:07.041719 [ 0.023371] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 11:52:07.053751 [ 0.023396] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 11:52:07.053814 [ 0.023932] pinctrl core: initialized pinctrl subsystem Oct 3 11:52:07.065746 [ 0.024683] DMI not present or invalid. Oct 3 11:52:07.065805 [ 0.025360] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 11:52:07.077739 [ 0.026911] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 11:52:07.077804 [ 0.028430] audit: initializing netlink subsys (disabled) Oct 3 11:52:07.089749 [ 0.028634] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 Oct 3 11:52:07.089817 [ 0.029814] thermal_sys: Registered thermal governor 'fair_share' Oct 3 11:52:07.101715 [ 0.029822] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 11:52:07.101777 [ 0.029827] thermal_sys: Registered thermal governor 'step_wise' Oct 3 11:52:07.113745 [ 0.029831] thermal_sys: Registered thermal governor 'user_space' Oct 3 11:52:07.113808 [ 0.029836] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 11:52:07.125751 [ 0.030034] No ATAGs? Oct 3 11:52:07.125808 [ 0.030101] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 11:52:07.137740 [ 0.030109] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 11:52:07.137774 [ 0.031190] Serial: AMBA PL011 UART driver Oct 3 11:52:07.149738 [ 0.080553] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 11:52:07.149807 [ 0.087503] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 11:52:07.161757 [ 0.091854] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages Oct 3 11:52:07.173735 [ 0.091862] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page Oct 3 11:52:07.173800 [ 0.099721] iommu: Default domain type: Translated Oct 3 11:52:07.173848 [ 0.099728] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 11:52:07.185754 [ 0.100681] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 11:52:07.197736 [ 0.101197] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 11:52:07.197798 [ 0.101209] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 11:52:07.197848 [ 0.101744] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 11:52:07.209764 [ 0.101773] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 11:52:07.221770 [ 0.102002] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 11:52:07.221830 [ 0.102495] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 11:52:07.233749 [ 0.102506] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 11:52:07.233812 [ 0.102883] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 11:52:07.245757 [ 0.103203] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 11:52:07.245819 [ 0.103213] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 11:52:07.257756 [ 0.103527] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 11:52:07.257818 [ 0.103627] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 11:52:07.257866 [ 0.103636] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 11:52:07.269752 [ 0.103816] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 11:52:07.269813 [ 0.104037] pps_core: LinuxPPS API ver. 1 registered Oct 3 11:52:07.281757 [ 0.104043] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 11:52:07.281829 [ 0.104060] PTP clock support registered Oct 3 11:52:07.293776 [ 0.105582] NetLabel: Initializing Oct 3 11:52:07.293834 [ 0.105588] NetLabel: domain hash size = 128 Oct 3 11:52:07.293881 [ 0.105593] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 11:52:07.305743 [ 0.105646] NetLabel: unlabeled traffic allowed by default Oct 3 11:52:07.305805 [ 0.105819] vgaarb: loaded Oct 3 11:52:07.317736 [ 0.106749] clocksource: Switched to clocksource mct-frc Oct 3 11:52:07.317799 [ 0.107361] VFS: Disk quotas dquot_6.6.0 Oct 3 11:52:07.317845 [ 0.107447] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 11:52:07.329754 [ 0.108237] AppArmor: AppArmor Filesystem Enabled Oct 3 11:52:07.329816 [ 0.118115] NET: Registered PF_INET protocol family Oct 3 11:52:07.341766 [ 0.118316] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 11:52:07.341835 [ 0.119973] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 11:52:07.353765 [ 0.120076] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 11:52:07.365740 [ 0.120100] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 11:52:07.365809 [ 0.120201] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 11:52:07.377821 [ 0.120431] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 11:52:07.377882 [ 0.120669] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 11:52:07.389800 [ 0.120761] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 11:52:07.401751 [ 0.120801] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 11:52:07.401816 [ 0.121037] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 11:52:07.413732 [ 0.121072] NET: Registered PF_XDP protocol family Oct 3 11:52:07.413793 [ 0.121084] PCI: CLS 0 bytes, default 64 Oct 3 11:52:07.413840 [ 0.121600] Trying to unpack rootfs image as initramfs... Oct 3 11:52:07.425744 [ 0.121928] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 11:52:07.425813 [ 0.127377] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 11:52:07.437778 [ 0.193266] Initialise system trusted keyrings Oct 3 11:52:07.449756 [ 0.193352] Key type blacklist registered Oct 3 11:52:07.449816 [ 0.194601] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 11:52:07.449868 [ 0.202508] zbud: loaded Oct 3 11:52:07.461744 [ 0.205315] integrity: Platform Keyring initialized Oct 3 11:52:07.461806 [ 0.205358] integrity: Machine keyring initialized Oct 3 11:52:07.461853 [ 0.205366] Key type asymmetric registered Oct 3 11:52:07.473762 [ 0.205374] Asymmetric key parser 'x509' registered Oct 3 11:52:07.473823 [ 1.423452] Freeing initrd memory: 25132K Oct 3 11:52:07.485739 [ 1.445523] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 11:52:07.485804 [ 1.445787] bounce: pool size: 64 pages Oct 3 11:52:07.485851 [ 1.445985] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 11:52:07.497758 [ 1.446147] io scheduler mq-deadline registered Oct 3 11:52:07.497817 [ 1.451290] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 11:52:07.509704 [ 1.472206] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 11:52:07.521758 [ 1.472218] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 11:52:07.521831 [ 1.474499] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 11:52:07.533743 [ 1.474509] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 11:52:07.545742 [ 1.475332] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 11:52:07.545810 [ 1.475341] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 11:52:07.557760 [ 1.476161] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 11:52:07.569746 [ 1.476170] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 11:52:07.581751 [ 1.478510] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 11:52:07.581824 [ 1.481362] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 11:52:07.593745 [ 1.484123] Serial: AMBA driver Oct 3 11:52:07.593804 [ 1.484348] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 11:52:07.605749 [ 1.484840] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 11:52:07.617759 [ 1.485306] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 11:52:07.617831 [ 2.566029] printk: console [ttySAC2] enabled Oct 3 11:52:07.629734 [ 2.570864] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 11:52:07.629807 [ 2.581513] STM32 USART driver initialized Oct 3 11:52:07.641658 [ 2.595919] mousedev: PS/2 mouse device common for all mice Oct 3 11:52:07.653726 [ 2.627165] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 11:52:07.689720 [ 2.635765] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T11:52:08 UTC (1727956328) Oct 3 11:52:07.701733 [ 2.645621] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 11:52:07.701795 [ 2.653084] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 11:52:07.713731 [ 2.661103] NET: Registered PF_INET6 protocol family Oct 3 11:52:07.725671 [ 2.685218] Segment Routing with IPv6 Oct 3 11:52:07.737709 [ 2.687489] In-situ OAM (IOAM) with IPv6 Oct 3 11:52:07.749741 [ 2.691445] mip6: Mobile IPv6 Oct 3 11:52:07.749799 [ 2.694281] NET: Registered PF_PACKET protocol family Oct 3 11:52:07.749848 [ 2.699487] mpls_gso: MPLS GSO support Oct 3 11:52:07.761699 [ 2.703522] ThumbEE CPU extension supported. Oct 3 11:52:07.761731 [ 2.707321] Registering SWP/SWPB emulation handler Oct 3 11:52:07.773732 [ 2.712578] registered taskstats version 1 Oct 3 11:52:07.773792 [ 2.716196] Loading compiled-in X.509 certificates Oct 3 11:52:07.773841 [ 3.176866] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 11:52:08.241794 [ 3.184210] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 11:52:08.253800 [ 3.195363] zswap: loaded using pool lzo/zbud Oct 3 11:52:08.253860 [ 3.199234] Key type .fscrypt registered Oct 3 11:52:08.253906 [ 3.202493] Key type fscrypt-provisioning registered Oct 3 11:52:08.265755 [ 3.226837] Key type encrypted registered Oct 3 11:52:08.289812 [ 3.229383] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 11:52:08.289874 [ 3.234929] ima: No TPM chip found, activating TPM-bypass! Oct 3 11:52:08.301813 [ 3.240364] ima: Allocated hash algorithm: sha256 Oct 3 11:52:08.301874 [ 3.245048] ima: No architecture policies found Oct 3 11:52:08.301922 [ 3.249607] evm: Initialising EVM extended attributes: Oct 3 11:52:08.313839 [ 3.254653] evm: security.selinux Oct 3 11:52:08.313899 [ 3.257955] evm: security.SMACK64 (disabled) Oct 3 11:52:08.313946 [ 3.262199] evm: security.SMACK64EXEC (disabled) Oct 3 11:52:08.325810 [ 3.266806] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 11:52:08.325872 [ 3.271836] evm: security.SMACK64MMAP (disabled) Oct 3 11:52:08.337818 [ 3.276434] evm: security.apparmor Oct 3 11:52:08.337877 [ 3.279820] evm: security.ima Oct 3 11:52:08.337921 [ 3.282770] evm: security.capability Oct 3 11:52:08.337965 [ 3.286313] evm: HMAC attrs: 0x1 Oct 3 11:52:08.349730 [ 3.885623] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 11:52:08.949708 [ 3.891581] clk: Disabling unused clocks Oct 3 11:52:08.949741 [ 3.904459] Freeing unused kernel image (initmem) memory: 2048K Oct 3 11:52:08.961791 [ 3.909318] Checked W+X mappings: passed, no W+X pages found Oct 3 11:52:08.973779 [ 3.914578] Run /init as init process Oct 3 11:52:08.973839 Loading, please wait... Oct 3 11:52:09.009742 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 11:52:09.081773 [ 4.851353] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 11:52:09.909818 [ 4.875115] usbcore: registered new interface driver usbfs Oct 3 11:52:09.933815 [ 4.882625] usbcore: registered new interface driver hub Oct 3 11:52:09.945811 [ 4.886597] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 11:52:09.945882 [ 4.886662] usbcore: registered new device driver usb Oct 3 11:52:09.957784 [ 4.906295] phy phy-12130000.phy.2: phy_power_on was called before phy_init Oct 3 11:52:09.969791 [ 4.912188] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 11:52:09.969853 [ 4.922068] phy phy-12130000.phy.2: phy_power_on was called before phy_init Oct 3 11:52:09.981814 [ 4.927685] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Oct 3 11:52:09.993807 [ 4.935293] exynos-ohci 12120000.usb: USB Host Controller Oct 3 11:52:09.993868 [ 4.940254] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 11:52:10.005818 [ 4.946259] Synopsys Designware Multimedia Card Interface Driver Oct 3 11:52:10.005880 [ 4.977576] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 11:52:10.041814 [ 4.978680] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Oct 3 11:52:10.041877 [ 4.983481] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 11:52:10.053806 [ 4.989457] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Oct 3 11:52:10.053876 [ 5.006878] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 11:52:10.065802 [ 5.011890] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 11:52:10.077764 [ 5.017489] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Oct 3 11:52:10.077868 [ 5.040441] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 11:52:10.101764 [ 5.053818] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 11:52:10.113831 [ 5.061575] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 11:52:10.125816 [ 5.068438] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 11:52:10.125884 [ 5.070894] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo Oct 3 11:52:10.137807 [ 5.075604] usb usb1: Product: EHCI Host Controller Oct 3 11:52:10.149806 [ 5.089925] usb usb1: Manufacturer: Linux 6.1.0-25-armmp-lpae ehci_hcd Oct 3 11:52:10.149870 [ 5.096437] usb usb1: SerialNumber: 12110000.usb Oct 3 11:52:10.161816 [ 5.101252] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 11:52:10.161881 [ 5.107490] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 11:52:10.173808 [ 5.111776] SCSI subsystem initialized Oct 3 11:52:10.173868 [ 5.117319] hub 1-0:1.0: USB hub found Oct 3 11:52:10.173938 [ 5.120351] hub 1-0:1.0: 3 ports detected Oct 3 11:52:10.185709 [ 5.123130] mmc_host mmc0: card is polling. Oct 3 11:52:10.185771 [ 5.142688] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 109,32 bit host data width,128 deep fifo Oct 3 11:52:10.209769 [ 5.147288] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 11:52:10.209838 [ 5.159021] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 11:52:10.221800 [ 5.166184] usb usb2: Product: USB Host Controller Oct 3 11:52:10.221859 [ 5.166808] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 11:52:10.233769 [ 5.170950] usb usb2: Manufacturer: Linux 6.1.0-25-armmp-lpae ohci_hcd Oct 3 11:52:10.245720 [ 5.186924] usb usb2: SerialNumber: 12120000.usb Oct 3 11:52:10.245781 [ 5.203766] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 11:52:10.269705 [ 5.296360] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 11:52:10.353737 [ 5.310498] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 11:52:10.377777 [ 5.316329] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 11:52:10.377845 [ 5.319800] hub 2-0:1.0: USB hub found Oct 3 11:52:10.389714 [ 5.334606] mmc1: new high speed SDHC card at address aaaa Oct 3 11:52:10.389776 [ 5.340926] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Oct 3 11:52:10.401740 [ 5.347088] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 11:52:10.413733 [ 5.357484] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 11:52:10.425741 [ 5.366139] mmc0: new DDR MMC card at address 0001 Oct 3 11:52:10.425802 [ 5.372881] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Oct 3 11:52:10.425850 [ 5.377068] hub 2-0:1.0: 3 ports detected Oct 3 11:52:10.437741 [ 5.377590] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 11:52:10.437806 [ 5.387021] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Oct 3 11:52:10.449731 [ 5.395842] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 11:52:10.461735 [ 5.408961] mmcblk0: p1 p2 p3 p4 Oct 3 11:52:10.461791 [ 5.412475] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Oct 3 11:52:10.473733 [ 5.419114] scsi host0: ahci-dwc Oct 3 11:52:10.473790 [ 5.422167] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 110 Oct 3 11:52:10.485743 [ 5.431310] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Oct 3 11:52:10.485803 [ 5.439857] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (241:0) Oct 3 11:52:10.497718 [ 5.709803] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 11:52:10.773727 [ 5.783994] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 11:52:10.845740 [ 5.892436] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 11:52:10.953761 [ 5.910795] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 11:52:10.965730 [ 5.916417] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 11:52:10.977782 [ 5.922216] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 11:52:10.989745 [ 5.929709] ata1.00: configured for UDMA/133 Oct 3 11:52:10.989805 [ 5.933616] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 11:52:11.001682 [ 5.983937] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 11:52:11.037711 [ 5.988065] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 11:52:11.049770 [ 5.996175] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 11:52:11.061781 [ 6.000425] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 11:52:11.073731 [ 6.005062] xhci-hcd xhci-hcd.2.auto: irq 111, io mem 0x12000000 Oct 3 11:52:11.073793 [ 6.023544] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 11:52:11.085741 [ 6.027628] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 11:52:11.085809 [ 6.035273] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 11:52:11.097764 [ 6.042090] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 11:52:11.109742 [ 6.050003] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 11:52:11.109809 [ 6.057207] usb usb3: Product: xHCI Host Controller Oct 3 11:52:11.121731 [ 6.062067] usb usb3: Manufacturer: Linux 6.1.0-25-armmp-lpae xhci-hcd Oct 3 11:52:11.121796 [ 6.068569] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 11:52:11.133715 [ 6.074580] hub 3-0:1.0: USB hub found Oct 3 11:52:11.133774 [ 6.077209] hub 3-0:1.0: 1 port detected Oct 3 11:52:11.133820 [ 6.084969] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 11:52:11.145768 [ 6.091774] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 11:52:11.157764 [ 6.099882] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 11:52:11.157831 [ 6.107088] usb usb4: Product: xHCI Host Controller Oct 3 11:52:11.169744 [ 6.111931] usb usb4: Manufacturer: Linux 6.1.0-25-armmp-lpae xhci-hcd Oct 3 11:52:11.169808 [ 6.118498] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 11:52:11.181740 [ 6.123389] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 11:52:11.193754 [ 6.135332] hub 4-0:1.0: USB hub found Oct 3 11:52:11.193813 [ 6.137671] hub 4-0:1.0: 1 port detected Oct 3 11:52:11.193859 [ 6.138572] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 11:52:11.205756 [ 6.149017] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 11:52:11.205816 [ 6.157811] sd 0:0:0:0: [sda] Write Protect is off Oct 3 11:52:11.217755 [ 6.161303] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 11:52:11.229754 [ 6.171034] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 11:52:11.229818 [ 6.191748] sda: sda1 sda2 < sda5 > Oct 3 11:52:11.253705 [ 6.194594] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 11:52:11.253765 [ 6.232705] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 11:52:11.301678 [ 6.340715] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 11:52:11.409686 [ 6.448661] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 11:52:11.517656 [ 6.556626] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 11:52:11.625691 [ 6.664592] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 11:52:11.733688 [ 7.073022] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 11:52:12.141767 [ 7.180625] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 11:52:12.249668 [ 7.274774] random: crng init done Oct 3 11:52:12.333696 [ 7.383681] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. Oct 3 11:52:12.453753 [ 7.394629] device-mapper: uevent: version 1.0.3 Oct 3 11:52:12.453814 [ 7.399242] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Oct 3 11:52:12.465683 [ 7.794876] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 11:52:12.861764 Begin: Loading essential drivers ... done. Oct 3 11:52:13.137683 Begin: Running /scripts/init-premount ... done. Oct 3 11:52:16.149776 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 11:52:16.161740 Begin: Running /scripts/local-premount ... done. Oct 3 11:52:16.221702 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 11:52:16.257721 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 11:52:16.341823 /dev/mapper/arndale--westfield--vg-root: clean, 39343/1220608 files, 378280/4882432 blocks Oct 3 11:52:16.557684 done. Oct 3 11:52:16.569722 [ 11.643660] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 11:52:16.701765 [ 11.831950] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 11:52:16.893748 done. Oct 3 11:52:16.894402 Begin: Running /scripts/local-bottom ... done. Oct 3 11:52:16.941735 Begin: Running /scripts/init-bottom ... done. Oct 3 11:52:16.977682 [ 12.165113] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. Oct 3 11:52:17.229734 INIT: version 3.06 booting Oct 3 11:52:17.517703 INIT: No inittab.d directory found Oct 3 11:52:17.589644 Using makefile-style concurrent boot in runlevel S. Oct 3 11:52:17.877749 Starting hotplug events dispatcher: systemd-udevd. Oct 3 11:52:19.593706 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 11:52:19.833736 Synthesizing the initial hotplug events (devices)...done. Oct 3 11:52:20.397630 Waiting for /dev to be fully populated...[ 15.528899] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Oct 3 11:52:20.589638 [ 15.586165] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 11:52:20.649605 [ 15.686154] sd 0:0:0:0: Attached scsi generic sg0 type 0 Oct 3 11:52:20.745643 [ 15.850345] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 11:52:20.913665 [ 15.904938] panfrost 11800000.gpu: clock rate = 533000000 Oct 3 11:52:20.961619 [ 15.920390] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 11:52:20.985616 [ 15.947562] panfrost 11800000.gpu: mali-t600 id 0x600 major 0x0 minor 0x0 status 0x1 Oct 3 11:52:21.009773 [ 15.953908] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,31b4dfff Oct 3 11:52:21.021734 [ 15.962011] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 Oct 3 11:52:21.033665 [ 15.962810] usb3503 usb-hub: switched to HUB mode Oct 3 11:52:21.033665 [ 15.973722] panfrost 11800000.gpu: shader_present=0xf l2_present=0x1 Oct 3 11:52:21.045671 [ 15.979240] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 0 Oct 3 11:52:21.045671 [ 15.984754] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 11:52:21.057599 [ 16.029096] blk_print_req_error: 6 callbacks suppressed Oct 3 11:52:21.093651 [ 16.029105] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 11:52:21.093651 [ 16.142424] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 11:52:21.201648 [ 16.255209] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 11:52:21.321623 [ 16.291011] usb 1-3: new high-speed USB device number 2 using exynos-ehci Oct 3 11:52:21.357597 [ 16.363392] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 11:52:21.429617 [ 16.460100] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Oct 3 11:52:21.525826 [ 16.466970] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 3 11:52:21.525862 [ 16.484429] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 11:52:21.549787 [ 16.506875] hub 1-3:1.0: USB hub found Oct 3 11:52:21.561750 [ 16.516846] hub 1-3:1.0: 3 ports detected Oct 3 11:52:21.573768 [ 16.592549] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 11:52:21.657807 [ 16.600669] OF: graph: no port node found in /soc/hdmi@14530000 Oct 3 11:52:21.657870 [ 16.700592] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 11:52:21.765709 [ 16.808685] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 11:52:21.873800 [ 16.816669] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 11:52:21.873864 [ 16.941442] usb 1-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=77.32 Oct 3 11:52:22.005844 [ 16.948507] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Oct 3 11:52:22.014710 [ 16.955755] usb 1-3.2: Product: USB2.0 Hub Oct 3 11:52:22.017791 [ 16.961344] hub 1-3.2:1.0: USB hub found Oct 3 11:52:22.017850 [ 16.964394] hub 1-3.2:1.0: 4 ports detected Oct 3 11:52:22.017896 [ 17.220493] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 11:52:22.281725 [ 17.286897] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 11:52:22.353712 [ 17.328391] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 11:52:22.389784 [ 17.400816] usb 1-3.2.4: New USB device found, idVendor=0b95, idProduct=772a, bcdDevice= 0.01 Oct 3 11:52:22.461806 [ 17.408038] usb 1-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Oct 3 11:52:22.473804 [ 17.415629] usb 1-3.2.4: Product: AX88772 Oct 3 11:52:22.473863 [ 17.419519] usb 1-3.2.4: Manufacturer: ASIX Elec. Corp. Oct 3 11:52:22.485742 [ 17.424715] usb 1-3.2.4: SerialNumber: 000001 Oct 3 11:52:22.485802 [ 17.943033] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 11:52:23.001760 [ 17.954608] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 11:52:23.013761 [ 18.629384] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 11:52:23.697787 [ 18.645015] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Oct 3 11:52:23.709794 [ 18.656870] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, c6:a8:d3:04:58:48 Oct 3 11:52:23.721773 [ 18.673028] usbcore: registered new interface driver asix Oct 3 11:52:23.733761 done. Oct 3 11:52:24.009694 [ 19.458317] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 11:52:24.513768 Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). Oct 3 11:52:24.561793 Checking file systems.../dev/sda1: clean, 922/61056 files, 25401/243968 blocks Oct 3 11:52:26.304895 done. Oct 3 11:52:26.328913 Cleaning up temporary files... /tmp. Oct 3 11:52:26.592888 [ 21.749487] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 11:52:26.812849 [ 21.798538] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 11:52:26.861029 [ 22.029691] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k FS Oct 3 11:52:27.088926 Mounting local filesystems...done. Oct 3 11:52:27.404884 Activating swapfile swap, if any...done. Oct 3 11:52:27.416965 Cleaning up temporary files.... Oct 3 11:52:27.452865 Starting Setting kernel variables: sysctl. Oct 3 11:52:27.596817 [ 23.101679] audit: type=1400 audit(1727956348.336:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=876 comm="apparmor_parser" Oct 3 11:52:28.169840 [ 23.117588] audit: type=1400 audit(1727956348.352:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=877 comm="apparmor_parser" Oct 3 11:52:28.181855 [ 23.132266] audit: type=1400 audit(1727956348.356:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=877 comm="apparmor_parser" Oct 3 11:52:28.205695 [ 23.473454] audit: type=1400 audit(1727956348.708:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=908 comm="apparmor_parser" Oct 3 11:52:28.541750 [ 23.487600] audit: type=1400 audit(1727956348.708:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=908 comm="apparmor_parser" Oct 3 11:52:28.553791 [ 23.501931] audit: type=1400 audit(1727956348.708:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=908 comm="apparmor_parser" Oct 3 11:52:28.577698 [ 23.524246] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 11:52:28.589685 [ 23.857744] audit: type=1400 audit(1727956349.092:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=945 comm="apparmor_parser" Oct 3 11:52:28.925720 [ 23.880473] audit: type=1400 audit(1727956349.116:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=907 comm="apparmor_parser" Oct 3 11:52:28.949749 [ 23.896966] audit: type=1400 audit(1727956349.120:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=907 comm="apparmor_parser" Oct 3 11:52:28.973756 [ 23.914293] audit: type=1400 audit(1727956349.124:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=907 comm="apparmor_parser" Oct 3 11:52:28.985759 Starting: AppArmorLoading AppArmor profiles...done. Oct 3 11:52:28.997633 . Oct 3 11:52:28.997685 [ 25.704794] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 11:52:30.761682 [ 25.704906] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 3 11:52:30.773588 Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1 Oct 3 11:52:32.105828 Copyright 2004-2022 Internet Systems Consortium. Oct 3 11:52:32.105903 All rights reserved. Oct 3 11:52:32.117722 For info, please visit https://www.isc.org/software/dhcp/ Oct 3 11:52:32.117784 Oct 3 11:52:32.117824 Listening on LPF/eth0/a6:46:13:77:e8:2f Oct 3 11:52:32.117868 Sending on LPF/eth0/a6:46:13:77:e8:2f Oct 3 11:52:32.129741 Sending on Socket/fallback Oct 3 11:52:32.129799 Created duid "\000\001\000\001.\221A\374\246F\023w\350/". Oct 3 11:52:32.129848 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 Oct 3 11:52:32.141712 [ 28.898112] exynos4-fb 14400000.fimd: deferred probe timeout, ignoring dependency Oct 3 11:52:33.965728 [ 28.909042] exynos-mixer 14450000.mixer: deferred probe timeout, ignoring dependency Oct 3 11:52:33.965807 [ 28.916985] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations Oct 3 11:52:33.977779 [ 28.923377] exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm]) Oct 3 11:52:33.989772 [ 28.931907] exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm]) Oct 3 11:52:33.989840 [ 28.941262] exynos-drm exynos-drm: bound 14500000.dsi (ops hdmi_enable [exynosdrm]) Oct 3 11:52:34.001777 [ 28.948082] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm]) Oct 3 11:52:34.013762 [ 28.957465] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 11:52:34.013825 [ 28.963785] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 11:52:34.025738 [ 28.973081] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 Oct 3 11:52:34.037701 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 Oct 3 11:52:36.725772 DHCPOFFER of 10.149.64.45 from 10.149.64.4 Oct 3 11:52:36.725875 DHCPREQUEST for 10.149.64.45 on eth0 to 255.255.255.255 port 67 Oct 3 11:52:36.737728 DHCPACK of 10.149.64.45 from 10.149.64.4 Oct 3 11:52:36.737786 bound to 10.149.64.45 -- renewal in 300 seconds. Oct 3 11:52:36.737833 done. Oct 3 11:52:36.737872 Cleaning up temporary files.... Oct 3 11:52:36.773693 Starting nftables: none Oct 3 11:52:36.857687 . Oct 3 11:52:37.277667 INIT: Entering runlevel: 2 Oct 3 11:52:37.349667 Using makefile-style concurrent boot in runlevel 2. Oct 3 11:52:37.385710 Starting Apache httpd web server: apache2. Oct 3 11:52:39.377673 Starting NTP server: ntpd2024-10-03T11:52:39 ntpd[1138]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 11:52:39.773727 2024-10-03T11:52:39 ntpd[1138]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 11:52:39.785720 . Oct 3 11:52:39.785771 Starting periodic command scheduler: cron. Oct 3 11:52:39.809718 Starting system message bus: dbus. Oct 3 11:52:40.205701 Starting OpenBSD Secure Shell server: sshd. Oct 3 11:52:40.853755 Oct 3 11:52:41.921716 Debian GNU/Linux 12 arndale-westfield ttySAC2 Oct 3 11:52:41.921782 Oct 3 11:52:41.921822 arndale-westfield login: osstest kernel cookie e9877d48a23e6206f0bbd94c93897f79 Oct 3 11:57:35.581737 INIT: Switching to r INIT: No inittab.d directorUsing makefile-style concurrent boot in runlevel 6. Oct 3 11:57:37.868678 Stopping SMP IRQ Balancer: irqbalance. Oct 3 11:57:37.928678 Stopping hotplug events dispatcher: systemd-udevd. Oct 3 11:57:37.940857 Stopping nftables: none. Oct 3 11:57:37.952661 Saving the system clock to /dev/rtc0. Oct 3 11:57:38.912693 Hardware Clock updated to Thu Oct 3 11:57:39 UTC 2024. Oct 3 11:57:38.912693 Stopping Apache httpd web server: apache2. Oct 3 11:57:39.080666 Asking all remaining processes to terminate...done. Oct 3 11:57:39.308711 All processes ended within 1 seconds...done. Oct 3 11:57:39.308711 Deconfiguring network interfaces...ifdown: ignoring unknown interface eth0=eth0 Oct 3 11:57:39.428715 done. Oct 3 11:57:39.428715 [ 334.605968] EXT4-fs (sda1): unmounting filesystem. Oct 3 11:57:39.665678 Deactivating swap...done. Oct 3 11:57:39.713679 Unmounting local filesystems...done. Oct 3 11:57:39.713733 [ 334.929025] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 11:57:39.989681 Will now restart. Oct 3 11:57:40.349685 [ 335.313072] asix 1-3.2.4:1.0 eth0: Link is Down Oct 3 11:57:40.373676 [ 335.379802] sd 0:0:0:0: [sda] Synchronizing SCSI cache Oct 3 11:57:40.433726 [ 335.388065] wake enabled for irq 101 (gpx1-4) Oct 3 11:57:40.445752 [ 335.390967] wake enabled for irq 102 (gpx1-5) Oct 3 11:57:40.445813 [ 335.395302] wake enabled for irq 103 (gpx1-6) Oct 3 11:57:40.457746 [ 335.399641] wake enabled for irq 104 (gpx1-7) Oct 3 11:57:40.457808 [ 335.403982] wake enabled for irq 105 (gpx2-0) Oct 3 11:57:40.457855 [ 335.408321] wake enabled for irq 106 (gpx2-1) Oct 3 11:57:40.469701 [ 335.413146] reboot: Reó Oct 3 11:57:40.805742 Oct 3 11:57:40.805765 Oct 3 11:57:40.805833 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 11:57:40.805886 Oct 3 11:57:40.805924 CPU: Exynos5250@1000MHz Oct 3 11:57:40.805967 Oct 3 11:57:40.806005 Board: Arndale Oct 3 11:57:40.817712 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 11:57:40.817776 ready Oct 3 11:57:40.817817 DRAM: 2 GiB Oct 3 11:57:40.817858 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 11:57:40.841675 trace: enabled Oct 3 11:57:40.877674 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 11:57:41.237676 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 11:57:41.285702 In: serial Oct 3 11:57:41.297727 Out: serial Oct 3 11:57:41.297782 Err: serial Oct 3 11:57:41.297825 SCSI: ARNDALE SCSI INIT Oct 3 11:57:41.297868 Target spinup took 0 ms. Oct 3 11:57:41.297911 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 11:57:41.309779 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 11:57:41.309841 Net: Net Initialization Skipped Oct 3 11:57:41.321725 No ethernet found. Oct 3 11:57:41.321781 Hostname: arndale-westfield Oct 3 11:57:41.321824 Hit any key to stop autoboot: 2  1  0 Oct 3 11:57:43.248761 (Re)start USB... Oct 3 11:57:43.248761 USB0: USB EHCI 1.00 Oct 3 11:57:43.248761 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 11:57:48.849792 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 11:57:48.849876 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 11:57:49.293692 Waiting for Ethernet connection... done. Oct 3 11:57:50.937784 BOOTP broadcast 1 Oct 3 11:57:50.937875 BOOTP broadcast 2 Oct 3 11:57:53.493793 DHCP client bound to address 10.149.64.45 (2657 ms) Oct 3 11:57:53.493876 Using asx0 device Oct 3 11:57:53.493918 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 11:57:53.505746 Filename 'pxelinux.0'. Oct 3 11:57:53.505802 Load address: 0x43e00000 Oct 3 11:57:53.505845 Loading: *### Oct 3 11:57:53.517693 2.7 MiB/s Oct 3 11:57:53.517748 done Oct 3 11:57:53.517788 Bytes transferred = 42430 (a5be hex) Oct 3 11:57:53.529760 missing environment variable: pxeuuid Oct 3 11:57:53.529818 Retrieving file: pxelinux.cfg/0A95402D Oct 3 11:57:53.529864 Using asx0 device Oct 3 11:57:53.529905 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 11:57:53.541771 Filename 'pxelinux.cfg/0A95402D'. Oct 3 11:57:53.541829 Load address: 0x51000000 Oct 3 11:57:53.541872 Loading: *# Oct 3 11:57:53.541911 31.3 KiB/s Oct 3 11:57:53.553759 done Oct 3 11:57:53.553812 Bytes transferred = 65 (41 hex) Oct 3 11:57:53.553857 Config file found Oct 3 11:57:53.553899 Ignoring unknown command: serial Oct 3 11:57:53.553942 1: local Oct 3 11:57:53.553981 scanning bus for devices... Oct 3 11:57:53.565674 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 11:57:53.577754 Type: Hard Disk Oct 3 11:57:53.577810 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 11:57:53.589757 Found 1 device(s). Oct 3 11:57:53.589813 Oct 3 11:57:53.589851 SCSI device 0: Oct 3 11:57:53.589892 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 11:57:53.589941 Type: Hard Disk Oct 3 11:57:53.601772 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 11:57:53.601834 ... is now current device Oct 3 11:57:53.601878 Scanning scsi 0... Oct 3 11:57:53.613682 Found U-Boot script /boot.scr Oct 3 11:57:53.781705 1812 bytes read in 35 ms (49.8 KiB/s) Oct 3 11:57:53.829757 ## Executing script at 50000000 Oct 3 11:57:53.829814 Loading dtbs/6.12.0-rc1+/exynos5250-arndale.dtb Oct 3 11:57:53.829861 46641 bytes read in 913 ms (49.8 KiB/s) Oct 3 11:57:54.729639 1015824 bytes read in 130 ms (7.5 MiB/s) Oct 3 11:57:54.873628 osstest uboot 0bf18f9b0699c8af29ae5e2b90769720 Oct 3 11:57:54.885657 Loaded xen-4.20-unstable to 0x41000000 (f8010) Oct 3 11:57:54.885690 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan Oct 3 11:57:54.897624 10912256 bytes read in 435 ms (23.9 MiB/s) Oct 3 11:57:55.341647 Loaded vmlinuz-6.12.0-rc1+ to 0x42000000 (a68200) Oct 3 11:57:55.341687 command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 11:57:55.365600 12163748 bytes read in 587 ms (19.8 MiB/s) Oct 3 11:57:55.953839 Loaded initrd.img-6.12.0-rc1+ to 0x43300000 (b99aa4) Oct 3 11:57:55.965740 chosen { Oct 3 11:57:55.965795 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan"; Oct 3 11:57:55.977759 #size-cells = <0x00000001>; Oct 3 11:57:55.977816 #address-cells = <0x00000001>; Oct 3 11:57:55.977861 stdout-path = "serial2:115200n8"; Oct 3 11:57:55.977950 module@1 { Oct 3 11:57:55.977993 reg = <0x43300000 0x00b99aa4>; Oct 3 11:57:55.989765 compatible = "xen,linux-initrd", "xen,multiboot-module"; Oct 3 11:57:55.989765 }; Oct 3 11:57:55.989765 module@0 { Oct 3 11:57:55.989765 bootargs = "ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Oct 3 11:57:56.013764 reg = <0x42000000 0x00a68200>; Oct 3 11:57:56.013825 compatible = "xen,linux-zimage", "xen,multiboot-module"; Oct 3 11:57:56.013875 }; Oct 3 11:57:56.013913 }; Oct 3 11:57:56.013952 Booting 0x41000000 - 0x43000000 Oct 3 11:57:56.025761 Kernel image @ 0x41000000 [ 0x000000 - 0x135000 ] Oct 3 11:57:56.025823 ## Flattened Device Tree blob at 43000000 Oct 3 11:57:56.025869 Booting using the fdt blob at 0x43000000 Oct 3 11:57:56.037733 reserving fdt memory region: addr=43000000 size=c000 Oct 3 11:57:56.037795 Loading Device Tree to 4fff1000, end 4fffffff ... OK Oct 3 11:57:56.037843 Oct 3 11:57:56.049725 Starting kernel ...(fake run for tracing) Oct 3 11:57:56.049787 Oct 3 11:57:56.049826 Oct 3 11:57:56.049863 Starting kernel ... Oct 3 11:57:56.049904 Oct 3 11:57:56.049941 __ __ _ _ ____ ___ _ _ _ Oct 3 11:57:56.109746 \ \/ /___ _ __ | || | |___ \ / _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Oct 3 11:57:56.109811 \ // _ \ '_ \ | || |_ __) | | | |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Oct 3 11:57:56.121756 / \ __/ | | | |__ _| / __/| |_| |__| |_| | | | \__ \ || (_| | |_) | | __/ Oct 3 11:57:56.121820 /_/\_\___|_| |_| |_|(_)_____|\___/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Oct 3 11:57:56.133689 Oct 3 11:57:56.133689 (XEN) Xen version 4.20-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Thu Oct 3 10:39:40 UTC 2024 Oct 3 11:57:56.145779 (XEN) Latest ChangeSet: Wed Oct 2 08:59:03 2024 +0200 git:b102c9f1ce-dirty Oct 3 11:57:56.145842 (XEN) build-id: a7636014d8eed2b092ba500c116331cd73847646 Oct 3 11:57:56.157751 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Oct 3 11:57:56.157816 (XEN) 32-bit Execution: Oct 3 11:57:56.169758 (XEN) Processor Features: 00001031:00011011 Oct 3 11:57:56.169817 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Oct 3 11:57:56.169866 (XEN) Extensions: GenericTimer Security Oct 3 11:57:56.181733 (XEN) Debug Features: 02010555 Oct 3 11:57:56.181791 (XEN) Auxiliary Features: 00000000 Oct 3 11:57:56.181836 (XEN) Memory Model Features: 10201105 20000000 Oct 3 11:57:56.193755 (XEN) 01240000 02102211 Oct 3 11:57:56.193813 (XEN) ISA Features: 02101110 13112111 21232041 Oct 3 11:57:56.193860 (XEN) 11112131 10011142 00000000 Oct 3 11:57:56.205777 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Oct 3 11:57:56.217763 (XEN) Set SYSRAM to 0000000041000070 (00200070) Oct 3 11:57:56.217763 (XEN) SMP: Allowing 2 CPUs Oct 3 11:57:56.217763 (XEN) enabled workaround for: ARM erratum 766422 Oct 3 11:57:56.229765 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Oct 3 11:57:56.229833 (XEN) GICv2 initialization: Oct 3 11:57:56.229877 (XEN) gic_dist_addr=0000000010481000 Oct 3 11:57:56.241761 (XEN) gic_cpu_addr=0000000010482000 Oct 3 11:57:56.241821 (XEN) gic_hyp_addr=0000000010484000 Oct 3 11:57:56.241867 (XEN) gic_vcpu_addr=0000000010486000 Oct 3 11:57:56.253767 (XEN) gic_maintenance_irq=25 Oct 3 11:57:56.253826 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Oct 3 11:57:56.253875 (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2) Oct 3 11:57:56.265743 (XEN) Initializing Credit2 scheduler Oct 3 11:57:56.265802 (XEN) load_precision_shift: 18 Oct 3 11:57:56.265846 (XEN) load_window_shift: 30 Oct 3 11:57:56.265917 (XEN) underload_balance_tolerance: 0 Oct 3 11:57:56.277745 (XEN) overload_balance_tolerance: -3 Oct 3 11:57:56.277804 (XEN) runqueues arrangement: socket Oct 3 11:57:56.277850 (XEN) cap enforcement granularity: 10ms Oct 3 11:57:56.289745 (XEN) load tracking window length 1073741824 ns Oct 3 11:57:56.289806 (XEN) Allocated console ring of 16 KiB. Oct 3 11:57:56.289851 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Oct 3 11:57:56.301742 (XEN) CPU0: Guest atomics will try 1 times before pausing the domain Oct 3 11:57:56.301806 (XEN) Bringing up CPU1 Oct 3 11:57:56.301850 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Oct 3 11:57:56.313796 (XEN) Brought up 2 CPUs Oct 3 11:57:56.313852 (XEN) CPU 1 booted. Oct 3 11:57:56.313894 (XEN) I/O virtualisation disabled Oct 3 11:57:56.313937 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Oct 3 11:57:56.325730 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Oct 3 11:57:56.325794 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Oct 3 11:57:56.337746 (XEN) Initializing Credit2 scheduler Oct 3 11:57:56.337804 (XEN) load_precision_shift: 18 Oct 3 11:57:56.337848 (XEN) load_window_shift: 30 Oct 3 11:57:56.337890 (XEN) underload_balance_tolerance: 0 Oct 3 11:57:56.349745 (XEN) overload_balance_tolerance: -3 Oct 3 11:57:56.349803 (XEN) runqueues arrangement: socket Oct 3 11:57:56.349848 (XEN) cap enforcement granularity: 10ms Oct 3 11:57:56.361759 (XEN) load tracking window length 1073741824 ns Oct 3 11:57:56.361820 (XEN) Adding cpu 0 to runqueue 0 Oct 3 11:57:56.361864 (XEN) First cpu on runqueue, activating Oct 3 11:57:56.361908 (XEN) Adding cpu 1 to runqueue 0 Oct 3 11:57:56.373739 (XEN) alternatives: Patching with alt table 002c31f0 -> 002c32c8 Oct 3 11:57:56.373739 (XEN) CPU0 will execute ICIALLU on guest exit Oct 3 11:57:56.385724 (XEN) CPU1 will execute ICIALLU on guest exit Oct 3 11:57:56.385724 (XEN) *** LOADING DOMAIN 0 *** Oct 3 11:57:56.385724 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Oct 3 11:57:56.397755 (XEN) Loading ramdisk from boot module @ 0000000043300000 Oct 3 11:57:56.397821 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Oct 3 11:57:56.397869 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Oct 3 11:57:56.961758 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Oct 3 11:57:56.973673 (XEN) Allocating PPI 16 for event channel interrupt Oct 3 11:57:56.997677 (XEN) d0: extended regions not supported for 32-bit guests Oct 3 11:57:57.009641 (XEN) Loading zImage from 0000000042000000 to 0000000067400000-0000000067e68200 Oct 3 11:57:57.009673 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d99aa4 Oct 3 11:57:57.117676 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b495 Oct 3 11:57:57.213808 (XEN) Initial low memory virq threshold set at 0x4000 pages. Oct 3 11:57:57.225751 (XEN) Scrubbing Free RAM in background Oct 3 11:57:57.225811 (XEN) Std. Loglevel: All Oct 3 11:57:57.225854 (XEN) Guest Loglevel: All Oct 3 11:57:57.225896 (XEN) *************************************************** Oct 3 11:57:57.237761 (XEN) WARNING: SILO mode is not enabled. Oct 3 11:57:57.237822 (XEN) It has implications on the security of the system, Oct 3 11:57:57.237870 (XEN) unless the communications have been forbidden between Oct 3 11:57:57.249760 (XEN) untrusted domains. Oct 3 11:57:57.249817 (XEN) *************************************************** Oct 3 11:57:57.249863 (XEN) 3... 2... 1... Oct 3 11:58:00.261649 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 11:58:00.261649 (XEN) Freed 384kB init memory. Oct 3 11:58:00.261649 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 11:58:01.405620 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Oct 3 11:58:01.425777 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Oct 3 11:58:01.425836 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Oct 3 11:58:01.437676 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Oct 3 11:58:01.437676 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 11:58:01.449606 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 11:58:01.485671 [ 0.000000] Linux version 6.12.0-rc1+ (osstest@himrod2) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Thu Oct 3 08:41:23 UTC 2024 Oct 3 11:58:01.497675 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 11:58:01.509665 [ 0.000000] CPU: div instructions available: patching division code Oct 3 11:58:01.509665 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 11:58:01.521676 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 11:58:01.533670 [ 0.000000] Memory policy: Data cache writealloc Oct 3 11:58:01.533670 [ 0.000000] Xen 4.20 support found Oct 3 11:58:01.533670 [ 0.000000] efi: UEFI not found. Oct 3 11:58:01.545728 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 on node -1 Oct 3 11:58:01.545738 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 11:58:01.545738 [ 0.000000] Zone ranges: Oct 3 11:58:01.557821 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Oct 3 11:58:01.557899 [ 0.000000] Normal empty Oct 3 11:58:01.557943 [ 0.000000] HighMem empty Oct 3 11:58:01.569734 [ 0.000000] Movable zone start for each node Oct 3 11:58:01.569767 [ 0.000000] Early memory node ranges Oct 3 11:58:01.569792 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Oct 3 11:58:01.581745 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Oct 3 11:58:01.581810 [ 0.000000] psci: probing for conduit method from DT. Oct 3 11:58:01.593757 [ 0.000000] psci: PSCIv1.1 detected in firmware. Oct 3 11:58:01.593829 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Oct 3 11:58:01.605732 [ 0.000000] psci: Trusted OS migration not required Oct 3 11:58:01.605794 [ 0.000000] psci: SMC Calling Convention v1.2 Oct 3 11:58:01.605846 [ 0.000000] percpu: Embedded 18 pages/cpu s41868 r8192 d23668 u73728 Oct 3 11:58:01.617763 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 11:58:01.629776 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 11:58:01.641761 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Oct 3 11:58:01.653723 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 131072 Oct 3 11:58:01.653788 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Oct 3 11:58:01.665754 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 11:58:01.665820 [ 0.000000] trace event string verifier disabled Oct 3 11:58:01.677754 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 11:58:01.677815 [ 0.000000] rcu: RCU event tracing is enabled. Oct 3 11:58:01.689694 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Oct 3 11:58:01.689731 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Oct 3 11:58:01.701769 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 11:58:01.701833 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 11:58:01.713745 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 11:58:01.713810 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 11:58:01.725755 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Oct 3 11:58:01.725857 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 11:58:01.737761 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 11:58:01.749680 [ 0.000012] Switching to timer-based delay loop, resolution 41ns Oct 3 11:58:01.749713 [ 0.000481] Console: colour dummy device 80x30 Oct 3 11:58:01.761656 [ 0.000499] printk: legacy console [hvc0] enabled Oct 3 11:58:01.761689 [ 0.284230] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Oct 3 11:58:01.773665 [ 0.294623] CPU: Testing write buffer coherency: ok Oct 3 11:58:01.785673 [ 0.299564] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 11:58:01.785714 [ 0.309118] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 11:58:01.798406 [ 0.315549] pid_max: default: 32768 minimum: 301 Oct 3 11:58:01.798483 [ 0.320324] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 11:58:01.809752 [ 0.327598] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 11:58:01.809821 [ 0.336039] /cpus/cpu@0 missing clock-frequency property Oct 3 11:58:01.821776 [ 0.340802] /cpus/cpu@1 missing clock-frequency property Oct 3 11:58:01.821838 [ 0.346221] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 11:58:01.833765 [ 0.352995] xen:grant_table: Grant tables using version 1 layout Oct 3 11:58:01.833829 [ 0.358053] Grant table initialized Oct 3 11:58:01.833874 [ 0.361600] xen:events: Using FIFO-based ABI Oct 3 11:58:01.845782 [ 0.365904] Xen: initializing cpu0 Oct 3 11:58:01.845840 [ 0.369427] Setting up static identity map for 0x60300000 - 0x603000ac Oct 3 11:58:01.857748 [ 0.377216] rcu: Hierarchical SRCU implementation. Oct 3 11:58:01.857814 [ 0.380823] rcu: Max phase no-delay instances is 1000. Oct 3 11:58:01.857864 [ 0.386362] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level Oct 3 11:58:01.869749 [ 0.396823] EFI services will not be available. Oct 3 11:58:01.881750 [ 0.400119] smp: Bringing up secondary CPUs ... Oct 3 11:58:01.881803 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 11:58:01.953771 [ 0.475238] Xen: initializing cpu1 Oct 3 11:58:01.953830 [ 0.475403] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 11:58:01.965704 [ 0.475427] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 11:58:01.965744 [ 0.494391] smp: Brought up 1 node, 2 CPUs Oct 3 11:58:01.977754 [ 0.498054] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 11:58:01.977818 [ 0.504341] CPU: All CPU(s) started in SVC mode. Oct 3 11:58:01.989771 [ 0.509670] Memory: 412732K/524288K available (15360K kernel code, 2279K rwdata, 6144K rodata, 2048K init, 440K bss, 44180K reserved, 65536K cma-reserved, 0K highmem) Oct 3 11:58:02.001752 [ 0.524548] devtmpfs: initialized Oct 3 11:58:02.001810 [ 0.537663] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 11:58:02.025769 [ 0.544197] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Oct 3 11:58:02.025842 [ 0.553890] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 11:58:02.037762 [ 0.561780] pinctrl core: initialized pinctrl subsystem Oct 3 11:58:02.037824 [ 0.568389] DMI not present or invalid. Oct 3 11:58:02.049791 [ 0.571916] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 11:58:02.049854 [ 0.578553] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 11:58:02.061685 [ 0.587893] thermal_sys: Registered thermal governor 'step_wise' Oct 3 11:58:02.073711 [ 0.588049] software IO TLB: area num 2. Oct 3 11:58:02.073772 [ 0.596719] software IO TLB: only able to allocate 8 MB Oct 3 11:58:02.073801 [ 0.603789] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Oct 3 11:58:02.085769 [ 0.608984] No ATAGs? Oct 3 11:58:02.085826 [ 0.611301] hw-breakpoint: Failed to enable monitor mode on CPU 0. Oct 3 11:58:02.097726 [ 0.619877] Serial: AMBA PL011 UART driver Oct 3 11:58:02.097785 [ 0.671529] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 65 Oct 3 11:58:02.157709 [ 0.700076] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 11:58:02.181745 [ 0.726449] xen:balloon: Initialising balloon driver Oct 3 11:58:02.205743 [ 0.732927] iommu: Default domain type: Translated Oct 3 11:58:02.217761 [ 0.736346] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 11:58:02.217825 [ 0.743952] SCSI subsystem initialized Oct 3 11:58:02.229757 [ 0.746798] usbcore: registered new interface driver usbfs Oct 3 11:58:02.229821 [ 0.752020] usbcore: registered new interface driver hub Oct 3 11:58:02.229870 [ 0.757403] usbcore: registered new device driver usb Oct 3 11:58:02.241759 [ 0.764009] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 11:58:02.241820 [ 0.767625] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 11:58:02.253771 [ 0.773809] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 11:58:02.253833 [ 0.778949] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 11:58:02.265773 [ 0.783842] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 11:58:02.265837 [ 0.789882] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 11:58:02.277760 [ 0.795648] pps_core: LinuxPPS API ver. 1 registered Oct 3 11:58:02.277822 [ 0.800075] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 11:58:02.289754 [ 0.809272] PTP clock support registered Oct 3 11:58:02.289813 [ 0.813455] EDAC MC: Ver: 3.0.0 Oct 3 11:58:02.289858 [ 0.816831] scmi_core: SCMI protocol bus registered Oct 3 11:58:02.301616 [ 0.830472] vgaarb: loaded Oct 3 11:58:02.313632 [ 0.837252] clocksource: Switched to clocksource arch_sys_counter Oct 3 11:58:02.313667 [ 0.852457] NET: Registered PF_INET protocol family Oct 3 11:58:02.337667 [ 0.856108] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Oct 3 11:58:02.337704 [ 0.864000] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 11:58:02.349661 [ 0.871716] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 11:58:02.361660 [ 0.879502] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Oct 3 11:58:02.361698 [ 0.887344] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Oct 3 11:58:02.373663 [ 0.894615] TCP: Hash tables configured (established 4096 bind 4096) Oct 3 11:58:02.373698 [ 0.901002] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 11:58:02.385659 [ 0.907554] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 11:58:02.397645 [ 0.914658] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 11:58:02.397681 [ 0.920853] RPC: Registered named UNIX socket transport module. Oct 3 11:58:02.409659 [ 0.926273] RPC: Registered udp transport module. Oct 3 11:58:02.409693 [ 0.931086] RPC: Registered tcp transport module. Oct 3 11:58:02.409719 [ 0.935820] RPC: Registered tcp-with-tls transport module. Oct 3 11:58:02.421724 [ 0.941404] RPC: Registered tcp NFSv4.1 backchannel transport module. Oct 3 11:58:02.421759 [ 0.947916] PCI: CLS 0 bytes, default 64 Oct 3 11:58:02.433745 [ 0.952988] Initialise system trusted keyrings Oct 3 11:58:02.433805 [ 0.956777] Trying to unpack rootfs image as initramfs... Oct 3 11:58:02.433854 [ 0.977753] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Oct 3 11:58:02.457766 [ 0.983113] squashfs: version 4.0 (2009/01/31) Phillip Lougher Oct 3 11:58:02.469699 [ 1.018399] NFS: Registering the id_resolver key type Oct 3 11:58:02.493626 [ 1.022109] Key type id_resolver registered Oct 3 11:58:02.505661 [ 1.026336] Key type id_legacy registered Oct 3 11:58:02.505694 [ 1.030459] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Oct 3 11:58:02.517667 [ 1.037268] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Oct 3 11:58:02.517704 [ 1.045013] Key type asymmetric registered Oct 3 11:58:02.529660 [ 1.048838] Asymmetric key parser 'x509' registered Oct 3 11:58:02.529693 [ 1.053823] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) Oct 3 11:58:02.541658 [ 1.061267] io scheduler mq-deadline registered Oct 3 11:58:02.541690 [ 1.065833] io scheduler kyber registered Oct 3 11:58:02.541715 [ 1.070005] io scheduler bfq registered Oct 3 11:58:02.553611 [ 1.177765] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 11:58:02.661633 [ 1.257287] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 11:58:02.745654 [ 1.263500] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 11:58:02.745694 [ 1.292542] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 11:58:02.781641 [ 1.298797] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 11:58:02.781681 [ 1.318194] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 11:58:02.805662 [ 1.324399] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 11:58:02.805701 [ 1.336973] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 11:58:02.817668 [ 1.343228] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 11:58:02.829651 [ 1.355546] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 11:58:02.841630 [ 1.391405] xen:xen_evtchn: Event-channel device installed Oct 3 11:58:02.877690 [ 1.511038] Freeing initrd memory: 11880K Oct 3 11:58:02.985643 [ 1.521238] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 11:58:02.997625 [ 1.532271] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 11:58:03.021663 [ 1.540665] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 11:58:03.021704 [ 1.549369] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 11:58:03.033664 [ 1.558392] SuperH (H)SCI(F) driver initialized Oct 3 11:58:03.045670 [ 1.562694] STMicroelectronics ASC driver initialized Oct 3 11:58:03.045707 [ 1.567611] STM32 USART driver initialized Oct 3 11:58:03.045733 [ 1.573018] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 11:58:03.057639 [ 1.580109] random: crng init done Oct 3 11:58:03.057670 [ 1.590447] brd: module loaded Oct 3 11:58:03.069626 [ 1.596351] loop: module loaded Oct 3 11:58:03.069657 [ 1.612555] Invalid max_queues (4), will use default max: 2. Oct 3 11:58:03.093627 [ 1.631600] tun: Universal TUN/TAP device driver, 1.6 Oct 3 11:58:03.117652 [ 1.635454] CAN device driver interface Oct 3 11:58:03.117685 [ 1.640685] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Oct 3 11:58:03.117712 [ 1.651917] xen_netfront: Initialising Xen virtual ethernet driver Oct 3 11:58:03.129637 [ 1.656763] pegasus: Pegasus/Pegasus II USB Ethernet driver Oct 3 11:58:03.141682 [ 1.662403] usbcore: registered new interface driver pegasus Oct 3 11:58:03.141716 [ 1.668123] usbcore: registered new interface driver asix Oct 3 11:58:03.153733 [ 1.673581] usbcore: registered new interface driver ax88179_178a Oct 3 11:58:03.153767 [ 1.679759] usbcore: registered new interface driver cdc_ether Oct 3 11:58:03.165689 [ 1.685642] usbcore: registered new interface driver smsc75xx Oct 3 11:58:03.165724 [ 1.691473] usbcore: registered new interface driver smsc95xx Oct 3 11:58:03.177661 [ 1.697299] usbcore: registered new interface driver net1080 Oct 3 11:58:03.177695 [ 1.703003] usbcore: registered new interface driver cdc_subset Oct 3 11:58:03.189661 [ 1.709006] usbcore: registered new interface driver zaurus Oct 3 11:58:03.189695 [ 1.714635] usbcore: registered new interface driver cdc_ncm Oct 3 11:58:03.201638 [ 1.724101] usbcore: registered new interface driver usb-storage Oct 3 11:58:03.201672 [ 1.736652] i2c_dev: i2c /dev entries driver Oct 3 11:58:03.213611 [ 1.758134] device-mapper: uevent: version 1.0.3 Oct 3 11:58:03.237646 [ 1.761554] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev Oct 3 11:58:03.249666 [ 1.771175] cpu cpu0: OPP table can't be empty Oct 3 11:58:03.249699 [ 1.775880] failed to register cpuidle driver Oct 3 11:58:03.261753 [ 1.779280] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Oct 3 11:58:03.261818 [ 1.787635] sdhci: Secure Digital Host Controller Interface driver Oct 3 11:58:03.273819 [ 1.792625] sdhci: Copyright(c) Pierre Ossman Oct 3 11:58:03.273880 [ 1.800709] sdhci-pltfm: SDHCI platform and OF driver helper Oct 3 11:58:03.285751 [ 1.808782] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Oct 3 11:58:03.285816 [ 1.816576] usbcore: registered new interface driver usbhid Oct 3 11:58:03.297824 [ 1.820815] usbhid: USB HID core driver Oct 3 11:58:03.297883 [ 1.835573] NET: Registered PF_INET6 protocol family Oct 3 11:58:03.321679 [ 1.840115] Segment Routing with IPv6 Oct 3 11:58:03.321712 [ 1.842926] In-situ OAM (IOAM) with IPv6 Oct 3 11:58:03.321737 [ 1.846948] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Oct 3 11:58:03.333779 [ 1.853402] NET: Registered PF_PACKET protocol family Oct 3 11:58:03.333842 [ 1.858041] can: controller area network core Oct 3 11:58:03.345786 [ 1.862463] NET: Registered PF_CAN protocol family Oct 3 11:58:03.345850 [ 1.867316] can: raw protocol Oct 3 11:58:03.345895 [ 1.870332] can: broadcast manager protocol Oct 3 11:58:03.357769 [ 1.874592] can: netlink gateway - max_hops=1 Oct 3 11:58:03.357830 [ 1.879360] Key type dns_resolver registered Oct 3 11:58:03.357877 [ 1.884250] ThumbEE CPU extension supported. Oct 3 11:58:03.369738 [ 1.887739] Registering SWP/SWPB emulation handler Oct 3 11:58:03.369800 [ 1.902219] Loading compiled-in X.509 certificates Oct 3 11:58:03.381646 [ 1.942740] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 11:58:03.429687 [ 1.946362] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 11:58:03.429731 [ 1.954015] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 11:58:03.441823 [ 1.961622] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 11:58:03.453737 [ 2.003309] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 11:58:03.489675 [ 2.012172] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T11:52:04 UTC (1727956324) Oct 3 11:58:03.501651 [ 2.023234] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 11:58:03.501684 [ 2.027939] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 11:58:03.513670 [ 2.032215] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 11:58:03.513704 [ 2.039069] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 11:58:03.525681 [ 2.044884] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 11:58:03.525717 [ 2.051153] clk: Not disabling unused clocks Oct 3 11:58:03.537674 [ 2.054555] PM: genpd: Disabling unused power domains Oct 3 11:58:03.537708 [ 2.063283] Freeing unused kernel image (initmem) memory: 2048K Oct 3 11:58:03.549672 [ 2.069587] Run /init as init process Oct 3 11:58:03.549705 Loading, please wait... Oct 3 11:58:03.573620 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 11:58:03.645647 [ 3.324675] i2c-gpio i2c-10: using lines 552 (SDA) and 553 (SCL) Oct 3 11:58:04.809612 [ 3.446347] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 11:58:04.929583 [ 3.472623] phy phy-12130000.phy.6: phy_power_on was called before phy_init Oct 3 11:58:04.953579 [ 3.478293] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 11:58:04.965597 [ 3.483801] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Oct 3 11:58:04.977528 [ 3.537923] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 11:58:05.025623 [ 3.545615] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 Oct 3 11:58:05.025667 [ 3.545939] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 11:58:05.037585 [ 3.564064] Synopsys Designware Multimedia Card Interface Driver Oct 3 11:58:05.049547 [ 3.582797] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 11:58:05.073570 [ 3.587042] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 11:58:05.073583 [ 3.609858] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 11:58:05.097585 [ 3.619993] hub 1-0:1.0: USB hub found Oct 3 11:58:05.097639 [ 3.624576] hub 1-0:1.0: 3 ports detected Oct 3 11:58:05.109552 [ 3.654165] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 11:58:05.145596 [ 3.659314] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 11:58:05.145610 [ 3.664848] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo Oct 3 11:58:05.157600 [ 3.674880] mmc_host mmc0: card is polling. Oct 3 11:58:05.157610 [ 3.679656] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 11:58:05.169598 [ 3.685050] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 11:58:05.169606 [ 3.690669] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 127,32 bit host data width,128 deep fifo Oct 3 11:58:05.181596 [ 3.701724] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 11:58:05.193602 [ 3.708289] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 11:58:05.193615 [ 3.717425] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 11:58:05.205579 [ 3.747924] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 11:58:05.229578 [ 3.754216] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 11:58:05.241579 [ 3.766115] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 11:58:05.253532 [ 3.798946] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 11:58:05.289650 [ 3.805005] ahci-dwc 122f0000.sata: AHCI vers 0001.0300, 32 command slots, 6 Gbps, platform mode Oct 3 11:58:05.289699 [ 3.813849] ahci-dwc 122f0000.sata: 1/1 ports implemented (port mask 0x1) Oct 3 11:58:05.301646 [ 3.820680] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 11:58:05.313588 [ 3.848278] phy phy-12130000.phy.6: phy_power_on was called before phy_init Oct 3 11:58:05.337624 [ 3.853877] exynos-ohci 12120000.usb: USB Host Controller Oct 3 11:58:05.337662 [ 3.859389] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Oct 3 11:58:05.349640 [ 3.869515] scsi host0: ahci-dwc Oct 3 11:58:05.349672 [ 3.871846] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 128 lpm-pol 0 Oct 3 11:58:05.361645 [ 3.881702] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 Oct 3 11:58:05.361678 [ 3.895015] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 11:58:05.385656 [ 3.905866] mmc0: new DDR MMC card at address 0001 Oct 3 11:58:05.385690 [ 3.915169] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Oct 3 11:58:05.397651 [ 3.929153] mmcblk0: p1 p2 p3 p4 Oct 3 11:58:05.409624 [ 3.932951] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Oct 3 11:58:05.421559 [ 3.942407] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Oct 3 11:58:05.421559 [ 3.948011] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Oct 3 11:58:05.433591 [ 3.955195] hub 2-0:1.0: USB hub found Oct 3 11:58:05.433591 [ 3.961280] hub 2-0:1.0: 3 ports detected Oct 3 11:58:05.445560 [ 3.978694] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Oct 3 11:58:05.457569 [ 3.982021] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 11:58:05.469605 [ 3.992984] s3c-rtc 101e0000.rtc: registered as rtc1 Oct 3 11:58:05.481638 [ 3.995146] mmc1: new high speed SDHC card at address aaaa Oct 3 11:58:05.481638 [ 4.006030] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Oct 3 11:58:05.493547 [ 4.357335] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 11:58:05.841599 [ 4.363672] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 11:58:05.853605 [ 4.369048] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 11:58:05.853605 [ 4.376993] ata1.00: configured for UDMA/133 Oct 3 11:58:05.865599 [ 4.380634] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 11:58:05.865599 [ 4.390209] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 11:58:05.877597 [ 4.396373] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 11:58:05.877597 [ 4.402235] sd 0:0:0:0: [sda] Write Protect is off Oct 3 11:58:05.889605 [ 4.406790] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 11:58:05.901570 [ 4.415966] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 11:58:05.901694 [ 4.514342] sda: sda1 sda2 < sda5 > Oct 3 11:58:05.997587 [ 4.517065] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 11:58:05.997587 [ 4.544875] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Oct 3 11:58:06.033608 [ 4.552618] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 11:58:06.033608 [ 4.556782] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 11:58:06.045569 [ 4.599074] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000808002000010 Oct 3 11:58:06.093608 [ 4.607491] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Oct 3 11:58:06.093608 [ 4.613449] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 11:58:06.093608 [ 4.617348] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 11:58:06.105606 [ 4.618796] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 11:58:06.117615 [ 4.636023] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 11:58:06.117615 [ 4.685827] hub 3-0:1.0: USB hub found Oct 3 11:58:06.165672 [ 4.690875] hub 3-0:1.0: 1 port detected Oct 3 11:58:06.177624 [ 4.703169] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 11:58:06.189663 [ 4.719698] hub 4-0:1.0: USB hub found Oct 3 11:58:06.201648 [ 4.723796] hub 4-0:1.0: 1 port detected Oct 3 11:58:06.201677 [ 4.746222] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 11:58:06.237630 [ 4.857345] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 11:58:06.345676 [ 4.965571] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 11:58:06.453673 [ 5.073723] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 11:58:06.561675 [ 5.181958] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 11:58:06.669809 [ 5.290121] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 11:58:06.777680 [ 5.398285] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 11:58:06.885801 [ 5.506401] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 11:58:06.993815 [ 5.614526] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 11:58:07.101773 [ 6.023427] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Oct 3 11:58:07.509805 [ 6.131207] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Oct 3 11:58:07.617816 [ 6.739664] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 11:58:08.229829 Begin: Loading essential drivers ... done. Oct 3 11:58:08.289682 Begin: Running /scripts/init-premount ... done. Oct 3 11:58:11.331216 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 11:58:11.331307 Begin: Running /scripts/local-premount ... done. Oct 3 11:58:11.331335 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 11:58:11.409621 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 11:58:11.493621 /dev/mapper/arndale--westfield--vg-root: clean, 46108/1220608 files, 607478/4882432 blocks Oct 3 11:58:11.697658 done. Oct 3 11:58:11.709590 [ 10.230772] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 11:58:11.721581 [ 10.565635] EXT4-fs (dm-0): mounted filesystem 230c00e2-14f7-4862-a0bc-4c6772e9ef96 ro with ordered data mode. Quota mode: disabled. Oct 3 11:58:12.057683 done. Oct 3 11:58:12.057717 Begin: Running /scripts/local-bottom ... done. Oct 3 11:58:12.093671 Begin: Running /scripts/init-bottom ... done. Oct 3 11:58:12.129644 INIT: version 3.06 booting Oct 3 11:58:12.525723 INIT: No inittab.d directory found Oct 3 11:58:12.585695 Using makefile-style concurrent boot in runlevel S. Oct 3 11:58:12.885749 Starting hotplug events dispatcher: systemd-udevd. Oct 3 11:58:14.541793 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 11:58:14.961777 Synthesizing the initial hotplug events (devices)...done. Oct 3 11:58:15.780981 Waiting for /dev to be fully populated...[ 14.423567] mc: Linux media interface: v0.10 Oct 3 11:58:15.912851 [ 14.430162] s5p-secss 10830000.sss: s5p-sss driver registered Oct 3 11:58:15.912851 [ 14.436213] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Oct 3 11:58:15.924917 [ 14.572517] videodev: Linux video capture interface: v2.00 Oct 3 11:58:16.056803 [ 14.718284] s5p-mfc 11000000.codec: Adding to iommu group 0 Oct 3 11:58:16.204878 [ 14.735234] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Oct 3 11:58:16.229055 [ 14.799075] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 11:58:16.288792 [ 14.850065] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 11:58:16.337021 [ 14.860769] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 11:58:16.359633 [ 14.868149] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 11:58:16.365052 [ 14.880072] s5p-mfc 11000000.codec: decoder registered as /dev/video0 Oct 3 11:58:16.365052 [ 14.886385] s5p-mfc 11000000.codec: encoder registered as /dev/video1 Oct 3 11:58:16.376862 [ 14.976320] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 11:58:16.460848 [ 15.013528] exynos-gsc 13e00000.gsc: Adding to iommu group 1 Oct 3 11:58:16.496857 [ 15.019402] exynos-gsc 13e10000.gsc: Adding to iommu group 2 Oct 3 11:58:16.508881 [ 15.024982] exynos-gsc 13e20000.gsc: Adding to iommu group 3 Oct 3 11:58:16.508881 [ 15.030949] exynos-gsc 13e30000.gsc: Adding to iommu group 4 Oct 3 11:58:16.520818 [ 15.088219] blk_print_req_error: 6 callbacks suppressed Oct 3 11:58:16.568848 [ 15.088232] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 11:58:16.580851 [ 15.177352] usb3503 usb-hub: switched to HUB mode Oct 3 11:58:16.664842 [ 15.180736] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 11:58:16.664842 [ 15.208582] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 11:58:16.700947 [ 15.316717] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 11:58:16.800861 [ 15.425503] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 11:58:16.908805 [ 15.512064] usb 1-3: new high-speed USB device number 2 using exynos-ehci Oct 3 11:58:16.992845 [ 15.535191] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 11:58:17.028770 [ 15.643509] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 11:58:17.136807 [ 15.671905] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Oct 3 11:58:17.160816 [ 15.692213] wm8994 3-001a: Device is not a WM8994, ID is 0 Oct 3 11:58:17.172825 [ 15.705403] wm8994 3-001a: probe with driver wm8994 failed with error -22 Oct 3 11:58:17.196788 [ 15.738261] hub 1-3:1.0: USB hub found Oct 3 11:58:17.220854 [ 15.740831] hub 1-3:1.0: 3 ports detected Oct 3 11:58:17.220854 [ 15.752467] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 11:58:17.244817 [ 15.860612] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 11:58:17.352817 [ 16.032254] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 11:58:17.520879 [ 16.040024] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 11:58:17.532859 [ 16.048648] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 11:58:17.544814 [ 16.069155] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 11:58:17.556883 [ 16.075179] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 11:58:17.568881 [ 16.083972] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 11:58:17.568881 [ 16.092590] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 11:58:17.580857 [ 16.209892] hub 1-3.2:1.0: USB hub found Oct 3 11:58:17.688991 [ 16.212877] hub 1-3.2:1.0: 4 ports detected Oct 3 11:58:17.700825 [ 16.276880] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Oct 3 11:58:17.760861 [ 16.285983] usbcore: registered new device driver onboard-usb-dev Oct 3 11:58:17.772833 [ 16.384678] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Oct 3 11:58:17.868863 [ 16.527283] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 11:58:18.012850 [ 16.651231] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 11:58:18.144791 [ 16.993165] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 11:58:18.480832 [ 17.299224] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 11:58:18.792865 [ 17.313720] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Oct 3 11:58:18.804873 [ 17.323560] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 52:ae:3e:dd:7d:90 Oct 3 11:58:18.816835 done. Oct 3 11:58:19.068774 [ 18.003174] EXT4-fs (dm-0): re-mounted 230c00e2-14f7-4862-a0bc-4c6772e9ef96 r/w. Quota mode: disabled. Oct 3 11:58:19.489758 Checking file systems.../dev/sda1: clean, 2188/61056 files, 44693/243968 blocks Oct 3 11:58:21.109715 done. Oct 3 11:58:21.133695 Cleaning up temporary files... /tmp. Oct 3 11:58:21.349721 [ 20.038798] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 11:58:21.529693 [ 20.087690] EXT4-fs (sda1): mounted filesystem cfd240e0-abdf-4a49-aba8-995ac113d97b r/w with ordered data mode. Quota mode: disabled. Oct 3 11:58:21.577642 [ 20.194043] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k Oct 3 11:58:21.685639 Mounting local filesystems...done. Oct 3 11:58:21.928870 Activating swapfile swap, if any...done. Oct 3 11:58:21.928870 Cleaning up temporary files.... Oct 3 11:58:21.964842 Starting Setting kernel variables: sysctl. Oct 3 11:58:22.108729 [ 21.979620] xenbr0: port 1(eth0) entered blocking state Oct 3 11:58:23.468798 [ 21.983479] xenbr0: port 1(eth0) entered disabled state Oct 3 11:58:23.468798 [ 21.988822] asix 1-3.2.4:1.0 eth0: entered allmulticast mode Oct 3 11:58:23.480858 [ 21.994648] asix 1-3.2.4:1.0 eth0: entered promiscuous mode Oct 3 11:58:23.480858 [ 22.005343] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 11:58:23.492857 Configuring network interfaces...RTNETLINK answers: Operation not supported Oct 3 11:58:25.385659 Oct 3 11:58:25.385693 Waiting for xenbr0 to get ready (MAXWAIT is 2 seconds). Oct 3 11:58:25.385719 [ 24.174607] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 11:58:25.661719 [ 24.177538] xenbr0: port 1(eth0) entered blocking state Oct 3 11:58:25.661766 [ 24.185848] xenbr0: port 1(eth0) entered forwarding state Oct 3 11:58:25.673615 done. Oct 3 11:58:25.877738 Cleaning up temporary files.... Oct 3 11:58:25.949781 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Oct 3 11:58:26.009731 Starting nftables: none Oct 3 11:58:26.069710 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Oct 3 11:58:26.177787 failed! Oct 3 11:58:26.177857 startpar: service(s) returned failure: nftables ... failed! Oct 3 11:58:26.189719 INIT: Entering runlevel: 2 Oct 3 11:58:26.201705 Using makefile-style concurrent boot in runlevel 2. Oct 3 11:58:26.213713 Starting Apache httpd web server: apache2AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.149.64.45. Set the 'ServerName' directive globally to suppress this message Oct 3 11:58:26.972162 . Oct 3 11:58:28.025662 Starting NTP server: ntpd2024-10-03T11:52:29 ntpd[1142]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 11:58:28.325856 2024-10-03T11:52:29 ntpd[1142]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 11:58:28.337800 . Oct 3 11:58:28.337851 [ 26.889387] platform sound: deferred probe pending: arndale-audio: snd_soc_register_card() failed Oct 3 11:58:28.373839 Starting SMP IRQ Balancer: irqbalance. Oct 3 11:58:28.949789 Starting system message bus: dbus. Oct 3 11:58:29.045708 Starting OpenBSD Secure Shell server: sshd. Oct 3 11:58:29.357715 Starting /usr/local/sbin/oxenstored... Oct 3 11:58:31.505815 Setting domain 0 name, domid and JSON config... Oct 3 11:58:31.517744 Done setting up Dom0 Oct 3 11:58:31.517799 Starting xenconsoled... Oct 3 11:58:31.517842 Starting QEMU as disk backend for dom0 Oct 3 11:58:31.517886 Oct 3 11:58:32.609660 Debian GNU/Linux 12 arndale-westfield hvc0 Oct 3 11:58:32.609723 Oct 3 11:58:32.609746 arndale-westfield login: Oct 3 11:58:33.872367 (XEN) *** Serial input to Xen (type 'CTRL-x' three times to switch input) Oct 3 11:58:33.893735 Oct 3 11:58:33.895258 Oct 3 11:58:34.865470 (XEN) '0' pressed -> dumping Dom0's registers Oct 3 11:58:34.881826 (XEN) *** Dumping Dom0 vcpu#0 state: *** Oct 3 11:58:34.881887 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Oct 3 11:58:34.883717 Not tainted ]---- Oct 3 11:58:34.893622 (XEN) CPU: 0 Oct 3 11:58:34.893650 (XEN) PC: c031a828 Oct 3 11:58:34.893673 (XEN) CPSR: 600f0093 MODE:32-bit Guest SVC Oct 3 11:58:34.893698 (XEN) R0: 00000005 R1: 00000000 R2: 0000e079 R3: c031a820 Oct 3 11:58:34.905669 (XEN) R4: c1b09d40 R5: c1d29660 R6: c1b04e5c R7: c1b04e9c Oct 3 11:58:34.905703 (XEN) R8: 00000000 R9: 00000000 R10:000000a9 R11:00000000 R12:c1d28a00 Oct 3 11:58:34.917642 (XEN) USR: SP: be99a960 LR: b6ea46c5 Oct 3 11:58:34.917675 (XEN) SVC: SP: c1b01f78 LR: c1185b00 SPSR:600f0013 Oct 3 11:58:34.917700 (XEN) ABT: SP: c1d3ab10 LR: c0300ec0 SPSR:60010193 Oct 3 11:58:34.929651 (XEN) UND: SP: c1d3ab20 LR: c0300fc0 SPSR:60010093 Oct 3 11:58:34.929684 (XEN) IRQ: SP: c1d3ab00 LR: c0300bc0 SPSR:600f0193 Oct 3 11:58:34.941752 (XEN) FIQ: SP: c1d3ab30 LR: c1d3ab30 SPSR:00000000 Oct 3 11:58:34.941812 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 11:58:34.941862 (XEN) Oct 3 11:58:34.953736 (XEN) SCTLR: 10c5387d Oct 3 11:58:34.953792 (XEN) TCR: 00000000 Oct 3 11:58:34.953835 (XEN) TTBR0: 0000000064b7406a Oct 3 11:58:34.953877 (XEN) TTBR1: 000000006020406a Oct 3 11:58:34.953920 (XEN) IFAR: b6e46814, IFSR: 00000007 Oct 3 11:58:34.965666 (XEN) DFAR: 004bb110, DFSR: 0000081f Oct 3 11:58:34.965724 (XEN) Oct 3 11:58:34.965764 (XEN) VTCR_EL2: 80003558 Oct 3 11:58:34.965806 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 11:58:34.977640 (XEN) Oct 3 11:58:34.977669 (XEN) SCTLR_EL2: 30cd187f Oct 3 11:58:34.977693 (XEN) HCR_EL2: 007c663f Oct 3 11:58:34.977716 (XEN) TTBR0_EL2: 000000004110e000 Oct 3 11:58:34.977739 (XEN) Oct 3 11:58:34.977759 (XEN) ESR_EL2: 07e00000 Oct 3 11:58:34.989649 (XEN) HPFAR_EL2: 00104810 Oct 3 11:58:34.989682 (XEN) HDFAR: e0807f00 Oct 3 11:58:34.989705 (XEN) HIFAR: c0dc8c74 Oct 3 11:58:34.989728 (XEN) Oct 3 11:58:34.989748 (XEN) Guest stack trace from sp=c1b01f78: Oct 3 11:58:35.001745 (XEN) Failed to convert stack to physical address Oct 3 11:58:35.001806 (XEN) *** Dumping Dom0 vcpu#1 state: *** Oct 3 11:58:35.001852 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 11:58:35.013759 (XEN) CPU: 0 Oct 3 11:58:35.013813 (XEN) PC: c031a828 Oct 3 11:58:35.013856 (XEN) CPSR: 60010093 MODE:32-bit Guest SVC Oct 3 11:58:35.013901 (XEN) R0: 00000005 R1: 00000000 R2: 000520f9 R3: c031a820 Oct 3 11:58:35.025757 (XEN) R4: c2110880 R5: c1d29660 R6: c1b04e5c R7: c1b04e9c Oct 3 11:58:35.025819 (XEN) R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:c1d28a00 Oct 3 11:58:35.037694 (XEN) USR: SP: bebc2938 LR: b6bea893 Oct 3 11:58:35.037726 (XEN) SVC: SP: e08d9fa0 LR: c1185b00 SPSR:60010013 Oct 3 11:58:35.037752 (XEN) ABT: SP: c1d3ab50 LR: c0301040 SPSR:600b0193 Oct 3 11:58:35.049694 (XEN) UND: SP: c1d3ab60 LR: c0300fc0 SPSR:60010093 Oct 3 11:58:35.049726 (XEN) IRQ: SP: c1d3ab40 LR: c0300bc0 SPSR:60010193 Oct 3 11:58:35.061673 (XEN) FIQ: SP: c1d3ab70 LR: c1d3ab70 SPSR:00000000 Oct 3 11:58:35.061706 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 11:58:35.073699 (XEN) Oct 3 11:58:35.073728 (XEN) SCTLR: 10c5387d Oct 3 11:58:35.073752 (XEN) TCR: 00000000 Oct 3 11:58:35.073774 (XEN) TTBR0: 00000000652f806a Oct 3 11:58:35.073798 (XEN) TTBR1: 000000006020406a Oct 3 11:58:35.085727 (XEN) IFAR: b6e44814, IFSR: 00000007 Oct 3 11:58:35.085760 (XEN) DFAR: b6b31fd2, DFSR: 00000017 Oct 3 11:58:35.085785 (XEN) Oct 3 11:58:35.085806 (XEN) VTCR_EL2: 80003558 Oct 3 11:58:35.085829 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 11:58:35.097809 (XEN) Oct 3 11:58:35.097862 (XEN) SCTLR_EL2: 30cd187f Oct 3 11:58:35.097906 (XEN) HCR_EL2: 007c663f Oct 3 11:58:35.097948 (XEN) TTBR0_EL2: 000000004110e000 Oct 3 11:58:35.097990 (XEN) Oct 3 11:58:35.098028 (XEN) ESR_EL2: 07e00000 Oct 3 11:58:35.109822 (XEN) HPFAR_EL2: 00104810 Oct 3 11:58:35.109878 (XEN) HDFAR: e0807f00 Oct 3 11:58:35.109921 (XEN) HIFAR: c0dc8c74 Oct 3 11:58:35.109963 (XEN) Oct 3 11:58:35.110000 (XEN) Guest stack trace from sp=e08d9fa0: Oct 3 11:58:35.121788 (XEN) Failed to convert stack to physical address Oct 3 11:58:35.121848 Oct 3 11:58:36.862191 (XEN) 'H' pressed -> dumping heap info (now = 40778328708) Oct 3 11:58:36.881893 (XEN) heap[node=0][zone=0] -> 16283 pages Oct 3 11:58:36.881954 (XEN) heap[node=0][zone=1] -> 0 p Oct 3 11:58:36.883838 ages Oct 3 11:58:36.893672 (XEN) heap[node=0][zone=2] -> 0 pages Oct 3 11:58:36.893729 (XEN) heap[node=0][zone=3] -> 0 pages Oct 3 11:58:36.893775 (XEN) heap[node=0][zone=4] -> 0 pages Oct 3 11:58:36.893819 (XEN) heap[node=0][zone=5] -> 0 pages Oct 3 11:58:36.905748 (XEN) heap[node=0][zone=6] -> 0 pages Oct 3 11:58:36.905807 (XEN) heap[node=0][zone=7] -> 0 pages Oct 3 11:58:36.905852 (XEN) heap[node=0][zone=8] -> 0 pages Oct 3 11:58:36.917752 (XEN) heap[node=0][zone=9] -> 0 pages Oct 3 11:58:36.917811 (XEN) heap[node=0][zone=10] -> 0 pages Oct 3 11:58:36.917857 (XEN) heap[node=0][zone=11] -> 0 pages Oct 3 11:58:36.917900 (XEN) heap[node=0][zone=12] -> 0 pages Oct 3 11:58:36.929763 (XEN) heap[node=0][zone=13] -> 0 pages Oct 3 11:58:36.929821 (XEN) heap[node=0][zone=14] -> 0 pages Oct 3 11:58:36.929866 (XEN) heap[node=0][zone=15] -> 0 pages Oct 3 11:58:36.941740 (XEN) heap[node=0][zone=16] -> 0 pages Oct 3 11:58:36.941800 (XEN) heap[node=0][zone=17] -> 0 pages Oct 3 11:58:36.941846 (XEN) heap[node=0][zone=18] -> 0 pages Oct 3 11:58:36.941890 (XEN) heap[node=0][zone=19] -> 130835 pages Oct 3 11:58:36.953825 (XEN) heap[node=0][zone=20] -> 241627 pages Oct 3 11:58:36.953884 (XEN) heap[node=0][zone=21] -> 0 pages Oct 3 11:58:36.953930 (XEN) heap[node=0][zone=22] -> 0 pages Oct 3 11:58:36.965811 (XEN) heap[node=0][zone=23] -> 0 pages Oct 3 11:58:36.965870 (XEN) heap[node=0][zone=24] -> 0 pages Oct 3 11:58:36.965919 (XEN) heap[node=0][zone=25] -> 0 pages Oct 3 11:58:36.977752 (XEN) heap[node=0][zone=26] -> 0 pages Oct 3 11:58:36.977822 (XEN) heap[node=0][zone=27] -> 0 pages Oct 3 11:58:36.977869 (XEN) heap[node=0][zone=28] -> 0 pages Oct 3 11:58:36.977915 Oct 3 11:58:38.857656 Oct 3 11:58:40.654704 Oct 3 11:58:40.865112 Oct 3 11:58:42.661698 Oct 3 11:58:42.900662 (XEN) Dumping timer queues: Oct 3 11:58:42.917776 (XEN) CPU00: Oct 3 11:58:42.917830 (XEN) ex= 293467us timer=43fdc968 cb=vtimer.c#virt_timer_expired(43fdc960) Oct 3 11:58:42.917887 (XEN) CPU0 Oct 3 11:58:42.920203 1: Oct 3 11:58:42.929648 (XEN) ex= 14202us timer=43fee968 cb=vtimer.c#virt_timer_expired(43fee960) Oct 3 11:58:42.929685 (XEN) ex= 24202us timer=43fdc968 cb=vtimer.c#virt_timer_expired(43fdc960) Oct 3 11:58:42.941655 Oct 3 11:58:44.870122 Oct 3 11:58:46.671948 Oct 3 11:58:46.908799 (XEN) 'd' pressed -> dumping registers Oct 3 11:58:46.929833 (XEN) Oct 3 11:58:46.929890 (XEN) *** Dumping CPU0 host state: *** Oct 3 11:58:46.929936 (XEN) ----[ Xen-4.20-unstable arm32 debug=y N Oct 3 11:58:46.932208 ot tainted ]---- Oct 3 11:58:46.941717 (XEN) CPU: 0 Oct 3 11:58:46.941772 (XEN) PC: 0025f53c domain.c#idle_loop+0x130/0x1ac Oct 3 11:58:46.941822 (XEN) CPSR: 6001005a MODE:Hypervisor Oct 3 11:58:46.941867 (XEN) R0: 00000000 R1: 00000001 R2: 00000000 R3: 00000000 Oct 3 11:58:46.953824 (XEN) R4: 00000000 R5: 003000e0 R6: 00331324 R7: 00000001 Oct 3 11:58:46.953886 (XEN) R8: 00331104 R9: 00000000 R10:40e00000 R11:4003ff54 R12:fffffffc Oct 3 11:58:46.965681 (XEN) HYP: SP: 4003ff44 LR: 00225b7c Oct 3 11:58:46.965681 (XEN) Oct 3 11:58:46.965681 (XEN) VTCR_EL2: 80003558 Oct 3 11:58:46.965681 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 11:58:46.977737 (XEN) Oct 3 11:58:46.977771 (XEN) SCTLR_EL2: 30cd187f Oct 3 11:58:46.977795 (XEN) HCR_EL2: 007c663f Oct 3 11:58:46.977819 (XEN) TTBR0_EL2: 000000004110e000 Oct 3 11:58:46.977842 (XEN) Oct 3 11:58:46.977863 (XEN) ESR_EL2: 07e00000 Oct 3 11:58:46.989772 (XEN) HPFAR_EL2: 00104810 Oct 3 11:58:46.989828 (XEN) HDFAR: e0807f00 Oct 3 11:58:46.989871 (XEN) HIFAR: c0dc8c74 Oct 3 11:58:46.989913 (XEN) Oct 3 11:58:46.989951 (XEN) Xen stack trace from sp=4003ff44: Oct 3 11:58:47.001753 (XEN) 07e00000 00295014 002919bc 4003ff4c 002678fc 00000000 00000000 00000000 Oct 3 11:58:47.001817 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 11:58:47.013776 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 11:58:47.013839 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 11:58:47.025788 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 11:58:47.037779 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 11:58:47.037841 (XEN) Xen call trace: Oct 3 11:58:47.037884 (XEN) [<0025f53c>] domain.c#idle_loop+0x130/0x1ac (PC) Oct 3 11:58:47.049771 (XEN) [<00225b7c>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 11:58:47.049832 (XEN) [<002678fc>] arch_get_xen_caps+0/0x90 Oct 3 11:58:47.049878 (XEN) Oct 3 11:58:47.061774 (XEN) *** Dumping CPU1 host state: *** Oct 3 11:58:47.061833 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 11:58:47.061883 (XEN) CPU: 1 Oct 3 11:58:47.061924 (XEN) PC: 0025f53c domain.c#idle_loop+0x130/0x1ac Oct 3 11:58:47.073778 (XEN) CPSR: 6001005a MODE:Hypervisor Oct 3 11:58:47.073837 (XEN) R0: 00000000 R1: 00000001 R2: 3fd06000 R3: 00000000 Oct 3 11:58:47.085773 (XEN) R4: 00000001 R5: 003000e0 R6: 00331324 R7: 00000002 Oct 3 11:58:47.085834 (XEN) R8: 00331104 R9: 00000001 R10:40e00000 R11:4000ff54 R12:fffffffc Oct 3 11:58:47.097777 (XEN) HYP: SP: 4000ff44 LR: 00225b7c Oct 3 11:58:47.097836 (XEN) Oct 3 11:58:47.097877 (XEN) VTCR_EL2: 80003558 Oct 3 11:58:47.097919 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 11:58:47.097962 (XEN) Oct 3 11:58:47.098000 (XEN) SCTLR_EL2: 30cd187f Oct 3 11:58:47.109771 (XEN) HCR_EL2: 007c663f Oct 3 11:58:47.109827 (XEN) TTBR0_EL2: 00000000ba004000 Oct 3 11:58:47.109871 (XEN) Oct 3 11:58:47.109910 (XEN) ESR_EL2: 07e00000 Oct 3 11:58:47.109951 (XEN) HPFAR_EL2: 00104810 Oct 3 11:58:47.121769 (XEN) HDFAR: e0807f00 Oct 3 11:58:47.121825 (XEN) HIFAR: c0aede98 Oct 3 11:58:47.121868 (XEN) Oct 3 11:58:47.121906 (XEN) Xen stack trace from sp=4000ff44: Oct 3 11:58:47.121951 (XEN) 07e00000 00301290 00000001 4000ff3c 002681e0 00000000 00000000 00000000 Oct 3 11:58:47.133789 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 11:58:47.145762 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 11:58:47.145825 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 11:58:47.157812 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 11:58:47.157876 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 11:58:47.169847 (XEN) Xen call trace: Oct 3 11:58:47.169903 (XEN) [<0025f53c>] domain.c#idle_loop+0x130/0x1ac (PC) Oct 3 11:58:47.169953 (XEN) [<00225b7c>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 11:58:47.181778 (XEN) [<002681e0>] start_secondary+0x204/0x20c Oct 3 11:58:47.181837 (XEN) Oct 3 11:58:47.181877 Oct 3 11:58:48.905937 (XEN) 'e' pressed -> dumping event-channel info Oct 3 11:58:48.929837 (XEN) Event channel information for domain 0: Oct 3 11:58:48.929897 (XEN) Polling vCPUs: {} Oct 3 11:58:48.929940 (XEN) port Oct 3 11:58:48.932251 [p/m/s] Oct 3 11:58:48.941725 (XEN) 1 [0/0/ - ]: s=3 n=1 x=0 d=0 p=4 Oct 3 11:58:48.941783 (XEN) 2 [0/0/ - ]: s=5 n=0 x=0 v=2 Oct 3 11:58:48.941830 (XEN) 3 [0/0/ - ]: s=5 n=1 x=0 v=3 Oct 3 11:58:48.953773 (XEN) 4 [0/0/ - ]: s=3 n=0 x=0 d=0 p=1 Oct 3 11:58:48.953833 Oct 3 11:58:50.902952 (XEN) gnttab_usage_print_all [ key 'g' pressed Oct 3 11:58:50.917802 (XEN) -------- active -------- -------- shared -------- Oct 3 11:58:50.917864 (XEN) [ref] localdo Oct 3 11:58:50.920197 m mfn pin localdom gmfn flags Oct 3 11:58:50.929720 (XEN) grant-table for remote d0 (v1) Oct 3 11:58:50.929775 (XEN) 1 frames (64 max), 0 maptrack frames (1024 max) Oct 3 11:58:50.941668 (XEN) no active grant table entries Oct 3 11:58:50.941668 (XEN) gnttab_usage_print_all ] done Oct 3 11:58:50.941668 Oct 3 11:58:52.926718 Oct 3 11:58:54.686955 Oct 3 11:58:54.935276 (XEN) Physical memory information: Oct 3 11:58:54.957689 (XEN) Xen heap: 65132kB free Oct 3 11:58:54.957750 (XEN) heap[19]: 523340kB free Oct 3 11:58:54.957795 (XEN) heap[20]: 966508kB fr Oct 3 11:58:54.960273 ee Oct 3 11:58:54.969573 (XEN) Dom heap: 1489848kB free Oct 3 11:58:54.969630 Oct 3 11:58:56.934190 Oct 3 11:58:58.696380 Oct 3 11:58:58.938183 (XEN) sched_smt_power_savings: disabled Oct 3 11:58:58.961815 (XEN) NOW=62858489500 Oct 3 11:58:58.961872 (XEN) Online Cpus: 0-1 Oct 3 11:58:58.961914 (XEN) Cpupool 0: Oct 3 11:58:58.961954 (XEN) Cpus: 0-1 Oct 3 11:58:58.961993 (XEN) Schedul Oct 3 11:58:58.963987 ing granularity: cpu, 1 CPU per sched-resource Oct 3 11:58:58.973722 (XEN) Scheduler: SMP Credit Scheduler rev2 (credit2) Oct 3 11:58:58.973780 (XEN) Active queues: 1 Oct 3 11:58:58.973823 (XEN) default-weight = 256 Oct 3 11:58:58.985735 (XEN) Runqueue 0: Oct 3 11:58:58.985735 (XEN) ncpus = 2 Oct 3 11:58:58.985735 (XEN) cpus = 0-1 Oct 3 11:58:58.985735 (XEN) max_weight = 256 Oct 3 11:58:58.985735 (XEN) pick_bias = 0 Oct 3 11:58:58.997664 (XEN) instload = 0 Oct 3 11:58:58.997664 (XEN) aveload = 1933 (~0%) Oct 3 11:58:58.997664 (XEN) idlers: 2 Oct 3 11:58:58.997664 (XEN) tickled: 0 Oct 3 11:58:58.997664 (XEN) fully idle cores: 2 Oct 3 11:58:59.013927 (XEN) Domain info: Oct 3 11:58:59.013989 (XEN) Domain: 0 w 256 c 0 v 2 Oct 3 11:58:59.014034 (XEN) 1: [0.0] flags=0 cpu=1 credit=8695980 [w=256] load=1823 (~0%) Oct 3 11:58:59.014086 (XEN) 2: [0.1] flags=0 cpu=0 credit=10500000 [w=256] load=185 (~0%) Oct 3 11:58:59.025781 (XEN) Runqueue 0: Oct 3 11:58:59.025836 (XEN) CPU[00] runq=0, sibling={0}, core={0-1} Oct 3 11:58:59.025910 (XEN) CPU[01] runq=0, sibling={1}, core={0-1} Oct 3 11:58:59.037774 (XEN) RUNQ: Oct 3 11:58:59.037828 (XEN) CPUs info: Oct 3 11:58:59.037869 (XEN) CPU[00] current=d[IDLE]v0, curr=d[IDLE]v0, prev=NULL Oct 3 11:58:59.037917 (XEN) CPU[01] current=d[IDLE]v1, curr=d[IDLE]v1, prev=NULL Oct 3 11:58:59.049692 Oct 3 11:59:00.937700 Oct 3 11:59:02.706193 Oct 3 11:59:02.933857 (XEN) Synced stime skew: max=84ns avg=84ns samples=1 current=84ns Oct 3 11:59:02.957822 (XEN) Synced cycles skew: max=4 avg=4 samples=1 current=4 Oct 3 11:59:02.957884 Oct 3 11:59:02.959980 Oct 3 11:59:04.952604 Oct 3 11:59:06.715711 Oct 3 11:59:06.934069 Oct 3 11:59:08.723066 Oct 3 11:59:08.939340 Oct 3 11:59:10.726984 Oct 3 11:59:20.931238 (XEN) 'q' pressed -> dumping domain info (now = 84853897708) Oct 3 11:59:20.953692 (XEN) General information for domain 0: Oct 3 11:59:20.953725 (XEN) refcnt=3 dying=0 pause_ Oct 3 11:59:20.955011 count=0 Oct 3 11:59:20.965685 (XEN) nr_pages=131072 xenheap_pages=2 dirty_cpus={} max_pages=131072 Oct 3 11:59:20.965721 (XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=00000020 Oct 3 11:59:20.977731 (XEN) p2m mappings for domain 0 (vmid 1): Oct 3 11:59:20.977764 (XEN) 1G mappings: 0 (shattered 0) Oct 3 11:59:20.977789 (XEN) 2M mappings: 255 (shattered 1) Oct 3 11:59:20.989684 (XEN) 4K mappings: 944 Oct 3 11:59:20.989716 (XEN) Rangesets belonging to domain 0: Oct 3 11:59:20.989742 (XEN) Interrupts { 32-72, 74, 77-79, 82-84, 86, 88-100, 103-104, 107-110, 114, 116-120, 123, 126-128, 138, 144, 146-147, 149-151, 156 } Oct 3 11:59:21.001686 (XEN) I/O Memory { 2020-2050, 3810-3811, 3830-3831, 3860-3861, 10000-10001, 10010-10045, 10050-10055, 10060-10061, 101b0-101b1, 101d0-101d1, 101e0-101e1, 10440-10441, 10800-10801, 10830-10831, 10850-10851, 10a60-10a61, 10d10-10d11, 11000-11010, 11200-11201, 11210-11211, 11400-11401, 11800-11805, 11c00-11c01, 11c10-11c11, 11d40-11d41, 11f20-11f21, 12000-12010, 12100-12101, 12110-12111, 12120-12121, 12130-12131, 12170-12171, 121a0-121a1, 121b0-121b1, 121d0-121d1, 12200-12201, 12210-12211, 12220-12221, 12230-12231, 12250-12251, 122f0-122f1, 12c00-12c01, 12c10-12c11, 12c30-12c31, 12c60-12c61, 12c70-12c71, 12c80-12c81, 12c90-12c91, 12ca0-12ca1, 12cb0-12cb1, 12cc0-12cc1, 12cd0-12cd1, 12ce0-12ce1, 12d10-12d11, 12d20-12d21, 12d30-12d31, 12d40-12d41, 12d60-12d61, 12d70-12d71, 12dd0-12dd1, 13260-13261, 13270-13271, 13280-13281, 13290-13291, 132a0-132a1, 132b0-132b1, 132c0-132c1, 132d0-132d1, 132e0-132e1, 132f0-132f1, 13400-13401, 13c40-13c41, 13c50-13c51, 13e00-13e01, 13e10-13e11, 13e20-13e21, 13e30-13e31, 13e80-13e81, 13e90-13e91, 13ea0-13ea1, 13eb0-13eb1, 14400-14440, 14450-14460, 14500-14510, 14530-145a0, 145b0-145b1, 14640-14641, 14650-14651 } Oct 3 11:59:21.097702 (XEN) NODE affinity for domain 0: [0] Oct 3 11:59:21.109686 (XEN) VCPU information and callbacks for domain 0: Oct 3 11:59:21.109720 (XEN) UNIT0 affinities: hard={0-1} soft={0-1} Oct 3 11:59:21.109746 (XEN) VCPU0: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 11:59:21.121699 (XEN) pause_count=0 pause_flags=1 Oct 3 11:59:21.121731 (XEN) GICH_LRs (vcpu 0) mask=0 Oct 3 11:59:21.121755 (XEN) VCPU_LR[0]=0 Oct 3 11:59:21.133682 (XEN) VCPU_LR[1]=0 Oct 3 11:59:21.133713 (XEN) VCPU_LR[2]=0 Oct 3 11:59:21.133737 (XEN) VCPU_LR[3]=0 Oct 3 11:59:21.133759 (XEN) No periodic timer Oct 3 11:59:21.133782 (XEN) UNIT1 affinities: hard={0-1} soft={0-1} Oct 3 11:59:21.145708 (XEN) VCPU1: CPU0 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 11:59:21.145744 (XEN) pause_count=0 pause_flags=1 Oct 3 11:59:21.145768 (XEN) GICH_LRs (vcpu 1) mask=0 Oct 3 11:59:21.157680 (XEN) VCPU_LR[0]=0 Oct 3 11:59:21.157711 (XEN) VCPU_LR[1]=0 Oct 3 11:59:21.157734 (XEN) VCPU_LR[2]=0 Oct 3 11:59:21.157756 (XEN) VCPU_LR[3]=0 Oct 3 11:59:21.157778 (XEN) No periodic timer Oct 3 11:59:21.157800 (XEN) Notifying guest 0:0 (virq 1, port 0) Oct 3 11:59:21.169660 (XEN) Notifying guest 0:1 (virq 1, port 0) Oct 3 11:59:21.169692 Oct 3 11:59:32.986266 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 11:59:33.009026 Oct 3 11:59:33.009026 arndale-westfield login: Oct 3 11:59:33.010848 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 12:00:11.653051 [ 177.608882] sd 0:0:0:0: [sda] Synchronizing SCSI cache Oct 3 12:00:59.092834 [ 177.684605] wake enabled for irq 119 (gpx1-4) Oct 3 12:00:59.164880 [ 177.687655] wake enabled for irq 120 (gpx1-5) Oct 3 12:00:59.176884 [ 177.692038] wake enabled for irq 121 (gpx1-6) Oct 3 12:00:59.176884 [ 177.696465] wake enabled for irq 122 (gpx1-7) Oct 3 12:00:59.176884 [ 177.700928] wake enabled for irq 123 (gpx2-0) Oct 3 12:00:59.188843 [ 177.705320] wake enabled for irq 124 (gpx2-1) Oct 3 12:00:59.188843 [ 177.710134] reboot: Resô Oct 3 12:00:59.524844 Oct 3 12:00:59.524844 Oct 3 12:00:59.524844 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 12:00:59.536887 Oct 3 12:00:59.536887 CPU: Exynos5250@1000MHz Oct 3 12:00:59.536887 Oct 3 12:00:59.536887 Board: Arndale Oct 3 12:00:59.536887 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 12:00:59.536887 ready Oct 3 12:00:59.536887 DRAM: 2 GiB Oct 3 12:00:59.548809 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 12:00:59.560864 trace: enabled Oct 3 12:00:59.596770 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 12:00:59.956827 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 12:01:00.016855 In: serial Oct 3 12:01:00.016855 Out: serial Oct 3 12:01:00.016855 Err: serial Oct 3 12:01:00.016855 SCSI: ARNDALE SCSI INIT Oct 3 12:01:00.016855 Target spinup took 0 ms. Oct 3 12:01:00.028871 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 12:01:00.028871 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 12:01:00.040873 Net: Net Initialization Skipped Oct 3 12:01:00.040873 No ethernet found. Oct 3 12:01:00.040873 Hostname: arndale-westfield Oct 3 12:01:00.040873 Hit any key to stop autoboot: 2  1  0 Oct 3 12:01:01.964965 (Re)start USB... Oct 3 12:01:01.965031 USB0: USB EHCI 1.00 Oct 3 12:01:01.976821 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 12:01:07.568964 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 12:01:07.580950 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 12:01:08.017002 Waiting for Ethernet connection... done. Oct 3 12:01:09.768824 BOOTP broadcast 1 Oct 3 12:01:09.768824 BOOTP broadcast 2 Oct 3 12:01:11.400841 DHCP client bound to address 10.149.64.45 (1707 ms) Oct 3 12:01:11.412978 Using asx0 device Oct 3 12:01:11.412978 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 12:01:11.412978 Filename 'pxelinux.0'. Oct 3 12:01:11.412978 Load address: 0x43e00000 Oct 3 12:01:11.424820 Loading: *### Oct 3 12:01:11.436846 2.2 MiB/s Oct 3 12:01:11.436846 done Oct 3 12:01:11.436846 Bytes transferred = 42430 (a5be hex) Oct 3 12:01:11.436846 missing environment variable: pxeuuid Oct 3 12:01:11.449005 Retrieving file: pxelinux.cfg/0A95402D Oct 3 12:01:11.449075 Using asx0 device Oct 3 12:01:11.449119 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 12:01:11.449202 Filename 'pxelinux.cfg/0A95402D'. Oct 3 12:01:11.460881 Load address: 0x51000000 Oct 3 12:01:11.460881 Loading: *# Oct 3 12:01:11.460881 355.5 KiB/s Oct 3 12:01:11.460881 done Oct 3 12:01:11.460881 Bytes transferred = 728 (2d8 hex) Oct 3 12:01:11.460881 Config file found Oct 3 12:01:11.472882 Ignoring unknown command: serial Oct 3 12:01:11.472882 1: ^Overwrite Oct 3 12:01:11.472882 Retrieving file: /osstest/tmp//arndale-westfield--initrd.gz Oct 3 12:01:11.472882 Using asx0 device Oct 3 12:01:11.484882 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 12:01:11.484882 Filename '/osstest/tmp//arndale-westfield--initrd.gz'. Oct 3 12:01:11.484882 Load address: 0x43300000 Oct 3 12:01:11.496929 Loading: *################################################################# Oct 3 12:01:11.824789 ################################################################# Oct 3 12:01:12.148812 ################################################################# Oct 3 12:01:12.472809 ################################################################# Oct 3 12:01:12.796836 ################################################################# Oct 3 12:01:13.124809 ################################################################# Oct 3 12:01:13.448784 ################################################################# Oct 3 12:01:13.772797 ################################################################# Oct 3 12:01:14.096810 ################################################################# Oct 3 12:01:14.420958 ################################################################# Oct 3 12:01:14.732762 ################################################################# Oct 3 12:01:15.056812 ################################################################# Oct 3 12:01:15.380789 ################################################################# Oct 3 12:01:15.696797 ################################################################# Oct 3 12:01:16.024796 ################################################################# Oct 3 12:01:16.348795 ################################################################# Oct 3 12:01:16.672809 ################################################################# Oct 3 12:01:17.000793 ################################################################# Oct 3 12:01:17.324810 ################################################################# Oct 3 12:01:17.648813 ################################################################# Oct 3 12:01:17.972792 ################################################################# Oct 3 12:01:18.300799 ################################################################# Oct 3 12:01:18.624745 ################################################################# Oct 3 12:01:18.924821 ################################################################# Oct 3 12:01:19.240797 ################################################################# Oct 3 12:01:19.540792 ################################################################# Oct 3 12:01:19.852794 ################################################################# Oct 3 12:01:20.164814 ######################################## Oct 3 12:01:20.356851 2.7 MiB/s Oct 3 12:01:20.356851 done Oct 3 12:01:20.356851 Bytes transferred = 26339181 (191e76d hex) Oct 3 12:01:20.368845 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/linux Oct 3 12:01:20.380883 Using asx0 device Oct 3 12:01:20.380883 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 12:01:20.380883 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/linux'. Oct 3 12:01:20.392842 Load address: 0x42000000 Oct 3 12:01:20.392842 Loading: *################################################################# Oct 3 12:01:20.716793 ################################################################# Oct 3 12:01:21.044810 ################################################################# Oct 3 12:01:21.368812 ################################################################# Oct 3 12:01:21.692995 ################################################################# Oct 3 12:01:22.008809 ############################################# Oct 3 12:01:22.236847 2.7 MiB/s Oct 3 12:01:22.236847 done Oct 3 12:01:22.236847 Bytes transferred = 5427712 (52d200 hex) Oct 3 12:01:22.236847 append: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=43139 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 12:01:22.284794 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb Oct 3 12:01:22.284794 Using asx0 device Oct 3 12:01:22.296833 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 12:01:22.296833 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb'. Oct 3 12:01:22.308825 Load address: 0x43000000 Oct 3 12:01:22.308825 Loading: *#### Oct 3 12:01:22.320761 2.3 MiB/s Oct 3 12:01:22.320761 done Oct 3 12:01:22.332831 Bytes transferred = 46686 (b65e hex) Oct 3 12:01:22.332831 Kernel image @ 0x42000000 [ 0x000000 - 0x52d200 ] Oct 3 12:01:22.332831 ## Flattened Device Tree blob at 43000000 Oct 3 12:01:22.332831 Booting using the fdt blob at 0x43000000 Oct 3 12:01:22.344803 Loading Ramdisk to 4e6e1000, end 4ffff76d ... OK Oct 3 12:01:22.764916 Loading Device Tree to 4e6d2000, end 4e6e065d ... OK Oct 3 12:01:22.776846 Oct 3 12:01:22.776846 Starting kernel ...(fake run for tracing) Oct 3 12:01:22.776846 Oct 3 12:01:22.776846 Oct 3 12:01:22.788933 Starting kernel ... Oct 3 12:01:22.788996 Oct 3 12:01:22.789035 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 12:01:28.820865 [ 0.000000] Linux version 6.1.0-25-armmp (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.106-3 (2024-08-26) Oct 3 12:01:28.844880 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 12:01:28.844880 [ 0.000000] CPU: div instructions available: patching division code Oct 3 12:01:28.856874 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 12:01:28.856874 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 12:01:28.868885 [ 0.000000] Memory policy: Data cache writealloc Oct 3 12:01:28.868885 [ 0.000000] efi: UEFI not found. Oct 3 12:01:28.880883 [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 Oct 3 12:01:28.880883 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 12:01:28.880883 [ 0.000000] Zone ranges: Oct 3 12:01:28.880883 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 12:01:28.892866 [ 0.000000] Normal empty Oct 3 12:01:28.892866 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 12:01:28.904884 [ 0.000000] Movable zone start for each node Oct 3 12:01:28.904884 [ 0.000000] Early memory node ranges Oct 3 12:01:28.904884 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 12:01:28.916826 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 12:01:28.928848 [ 0.000000] percpu: Embedded 18 pages/cpu s44692 r8192 d20844 u73728 Oct 3 12:01:28.928848 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 12:01:28.940833 [ 0.000000] Kernel command line: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=43139 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 12:01:28.976795 [ 0.000000] Unknown kernel command line parameters "preseed --- vga=normal auto=true hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=43139 domain=test-lab.xenproject.org", will be passed to user space. Oct 3 12:01:29.013079 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 12:01:29.024866 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 12:01:29.036834 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 12:01:29.036834 [ 0.000000] Memory: 2015968K/2097152K available (11264K kernel code, 1696K rwdata, 3724K rodata, 2048K init, 376K bss, 64800K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 12:01:29.060842 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 12:01:29.060842 [ 0.000000] ftrace: allocating 39612 entries in 117 pages Oct 3 12:01:29.072856 [ 0.000000] ftrace: allocated 117 pages with 5 groups Oct 3 12:01:29.072856 [ 0.000000] trace event string verifier disabled Oct 3 12:01:29.072856 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 12:01:29.088880 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 12:01:29.088880 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 12:01:29.088880 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 12:01:29.100860 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 12:01:29.100860 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 12:01:29.112860 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 12:01:29.112860 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 12:01:29.124969 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 12:01:29.125040 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 12:01:29.136880 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 12:01:29.136880 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 12:01:29.148855 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 12:01:29.160856 [ 0.000017] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 12:01:29.160856 [ 0.002629] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 12:01:29.172885 [ 0.002643] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 12:01:29.184875 [ 0.002658] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 12:01:29.184875 [ 0.002669] Ignoring duplicate/late registration of read_current_timer delay Oct 3 12:01:29.196872 [ 0.003028] Console: colour dummy device 80x30 Oct 3 12:01:29.196872 [ 0.003068] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 12:01:29.208506 [ 0.003081] CPU: Testing write buffer coherency: ok Oct 3 12:01:29.220814 [ 0.003122] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 12:01:29.220814 [ 0.003130] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 12:01:29.232871 [ 0.003137] pid_max: default: 32768 minimum: 301 Oct 3 12:01:29.232871 [ 0.003498] LSM: Security Framework initializing Oct 3 12:01:29.244840 [ 0.003570] landlock: Up and running. Oct 3 12:01:29.244840 [ 0.003575] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 12:01:29.256859 [ 0.003759] AppArmor: AppArmor initialized Oct 3 12:01:29.256859 [ 0.003772] TOMOYO Linux initialized Oct 3 12:01:29.256859 [ 0.003817] LSM support for eBPF active Oct 3 12:01:29.268849 [ 0.004060] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 12:01:29.268849 [ 0.004074] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 12:01:29.280994 [ 0.005508] /cpus/cpu@0 missing clock-frequency property Oct 3 12:01:29.281057 [ 0.005535] /cpus/cpu@1 missing clock-frequency property Oct 3 12:01:29.292866 [ 0.005549] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 12:01:29.292866 [ 0.006500] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 12:01:29.304879 [ 0.006508] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 12:01:29.304879 [ 0.006611] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 12:01:29.316879 [ 0.006616] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 12:01:29.316879 [ 0.006762] Setting up static identity map for 0x40300000 - 0x403000ac Oct 3 12:01:29.328887 [ 0.007919] rcu: Hierarchical SRCU implementation. Oct 3 12:01:29.328887 [ 0.007924] rcu: Max phase no-delay instances is 1000. Oct 3 12:01:29.340908 [ 0.010044] EFI services will not be available. Oct 3 12:01:29.340908 [ 0.010386] smp: Bringing up secondary CPUs ... Oct 3 12:01:29.352886 [ 0.011121] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 12:01:29.352886 [ 0.011134] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 12:01:29.364891 [ 0.011267] smp: Brought up 1 node, 2 CPUs Oct 3 12:01:29.364891 [ 0.011276] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 12:01:29.376883 [ 0.011283] CPU: All CPU(s) started in HYP mode. Oct 3 12:01:29.376883 [ 0.011287] CPU: Virtualization extensions available. Oct 3 12:01:29.376883 [ 0.011911] devtmpfs: initialized Oct 3 12:01:29.388885 [ 0.023300] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 12:01:29.388885 [ 0.023535] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 12:01:29.400879 [ 0.023561] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 12:01:29.412885 [ 0.024092] pinctrl core: initialized pinctrl subsystem Oct 3 12:01:29.412885 [ 0.024799] DMI not present or invalid. Oct 3 12:01:29.412885 [ 0.025479] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 12:01:29.424886 [ 0.030876] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 12:01:29.436883 [ 0.032429] audit: initializing netlink subsys (disabled) Oct 3 12:01:29.436883 [ 0.032632] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 Oct 3 12:01:29.448892 [ 0.033790] thermal_sys: Registered thermal governor 'fair_share' Oct 3 12:01:29.448892 [ 0.033798] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 12:01:29.464896 [ 0.033802] thermal_sys: Registered thermal governor 'step_wise' Oct 3 12:01:29.464896 [ 0.033807] thermal_sys: Registered thermal governor 'user_space' Oct 3 12:01:29.464896 [ 0.033811] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 12:01:29.476825 [ 0.034186] No ATAGs? Oct 3 12:01:29.476825 [ 0.034257] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 12:01:29.488885 [ 0.034265] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 12:01:29.488885 [ 0.035343] Serial: AMBA PL011 UART driver Oct 3 12:01:29.500960 [ 0.084740] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 12:01:29.501031 [ 0.091738] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 12:01:29.512890 [ 0.102752] iommu: Default domain type: Translated Oct 3 12:01:29.512890 [ 0.102761] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 12:01:29.524887 [ 0.103731] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 12:01:29.524887 [ 0.104263] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 12:01:29.536869 [ 0.104275] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 12:01:29.536869 [ 0.104811] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 12:01:29.546903 [ 0.104841] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 12:01:29.560880 [ 0.105023] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 12:01:29.560880 [ 0.105376] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 12:01:29.572889 [ 0.105386] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 12:01:29.572889 [ 0.105780] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 12:01:29.572889 [ 0.106067] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 12:01:29.584882 [ 0.106077] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 12:01:29.584882 [ 0.106355] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 12:01:29.596862 [ 0.106456] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 12:01:29.596862 [ 0.106466] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 12:01:29.608944 [ 0.106665] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 12:01:29.609010 [ 0.106859] pps_core: LinuxPPS API ver. 1 registered Oct 3 12:01:29.620928 [ 0.106865] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 12:01:29.620928 [ 0.106880] PTP clock support registered Oct 3 12:01:29.632856 [ 0.108520] NetLabel: Initializing Oct 3 12:01:29.632856 [ 0.108526] NetLabel: domain hash size = 128 Oct 3 12:01:29.632856 [ 0.108532] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 12:01:29.644836 [ 0.108587] NetLabel: unlabeled traffic allowed by default Oct 3 12:01:29.644836 [ 0.108772] vgaarb: loaded Oct 3 12:01:29.644836 [ 0.109419] clocksource: Switched to clocksource mct-frc Oct 3 12:01:29.656879 [ 0.110048] VFS: Disk quotas dquot_6.6.0 Oct 3 12:01:29.656879 [ 0.110135] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 12:01:29.668882 [ 0.110879] AppArmor: AppArmor Filesystem Enabled Oct 3 12:01:29.668882 [ 0.120919] NET: Registered PF_INET protocol family Oct 3 12:01:29.680892 [ 0.121150] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 12:01:29.680892 [ 0.122761] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 12:01:29.692877 [ 0.122863] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 12:01:29.704857 [ 0.122888] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 12:01:29.704857 [ 0.122989] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 12:01:29.716860 [ 0.123221] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 12:01:29.716860 [ 0.123453] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 12:01:29.728860 [ 0.123544] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 12:01:29.728860 [ 0.123584] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 12:01:29.740848 [ 0.123788] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 12:01:29.752883 [ 0.123824] NET: Registered PF_XDP protocol family Oct 3 12:01:29.752883 [ 0.123834] PCI: CLS 0 bytes, default 64 Oct 3 12:01:29.752883 [ 0.124950] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 12:01:29.764850 [ 0.125211] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 12:01:29.776903 [ 0.129780] Trying to unpack rootfs image as initramfs... Oct 3 12:01:29.776903 [ 0.183694] Initialise system trusted keyrings Oct 3 12:01:29.776903 [ 0.183766] Key type blacklist registered Oct 3 12:01:29.788807 [ 0.183998] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 12:01:29.788807 [ 0.191446] zbud: loaded Oct 3 12:01:29.788807 [ 0.192509] integrity: Platform Keyring initialized Oct 3 12:01:29.800783 [ 0.192547] integrity: Machine keyring initialized Oct 3 12:01:29.800851 [ 0.192555] Key type asymmetric registered Oct 3 12:01:29.812844 [ 0.192562] Asymmetric key parser 'x509' registered Oct 3 12:01:29.812844 [ 1.499456] Freeing initrd memory: 25724K Oct 3 12:01:29.812844 [ 1.510754] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 12:01:29.824869 [ 1.511040] bounce: pool size: 64 pages Oct 3 12:01:29.824869 [ 1.511207] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 12:01:29.836865 [ 1.511373] io scheduler mq-deadline registered Oct 3 12:01:29.836865 [ 1.516527] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 12:01:29.848855 [ 1.537316] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 12:01:29.848855 [ 1.537329] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 12:01:29.860857 [ 1.539646] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 12:01:29.872881 [ 1.539657] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 12:01:29.884863 [ 1.540490] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 12:01:29.884863 [ 1.540500] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 12:01:29.896842 [ 1.541300] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 12:01:29.908862 [ 1.541309] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 12:01:29.908862 [ 1.543713] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 12:01:29.920869 [ 1.546577] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 12:01:29.932964 [ 1.549263] Serial: AMBA driver Oct 3 12:01:29.933008 [ 1.549568] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 12:01:29.944812 [ 1.550051] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 12:01:29.944812 [ 1.550517] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 12:01:29.960890 [ 2.688620] printk: console [ttySAC2] enabled Oct 3 12:01:29.960890 [ 2.693455] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 12:01:29.972854 [ 2.704070] STM32 USART driver initialized Oct 3 12:01:29.972854 [ 2.718168] mousedev: PS/2 mouse device common for all mice Oct 3 12:01:29.996892 [ 2.749521] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 12:01:30.020947 [ 2.758126] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T11:55:32 UTC (1727956532) Oct 3 12:01:30.032874 [ 2.767962] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 12:01:30.044872 [ 2.775411] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 12:01:30.044872 [ 2.783382] NET: Registered PF_INET6 protocol family Oct 3 12:01:30.056838 [ 2.796889] Segment Routing with IPv6 Oct 3 12:01:30.068847 [ 2.799173] In-situ OAM (IOAM) with IPv6 Oct 3 12:01:30.068847 [ 2.803126] mip6: Mobile IPv6 Oct 3 12:01:30.080872 [ 2.805966] NET: Registered PF_PACKET protocol family Oct 3 12:01:30.080872 [ 2.811120] mpls_gso: MPLS GSO support Oct 3 12:01:30.080872 [ 2.815361] ThumbEE CPU extension supported. Oct 3 12:01:30.092869 [ 2.819049] Registering SWP/SWPB emulation handler Oct 3 12:01:30.092869 [ 2.824218] registered taskstats version 1 Oct 3 12:01:30.092869 [ 2.827877] Loading compiled-in X.509 certificates Oct 3 12:01:30.104813 [ 3.288327] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 12:01:30.561011 [ 3.295674] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 12:01:30.576857 [ 3.306705] zswap: loaded using pool lzo/zbud Oct 3 12:01:30.584862 [ 3.310681] Key type .fscrypt registered Oct 3 12:01:30.584862 [ 3.313999] Key type fscrypt-provisioning registered Oct 3 12:01:30.584862 [ 3.327744] Key type encrypted registered Oct 3 12:01:30.596829 [ 3.330347] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 12:01:30.608867 [ 3.335847] ima: No TPM chip found, activating TPM-bypass! Oct 3 12:01:30.608867 [ 3.341266] ima: Allocated hash algorithm: sha256 Oct 3 12:01:30.620868 [ 3.346065] ima: No architecture policies found Oct 3 12:01:30.620868 [ 3.350492] evm: Initialising EVM extended attributes: Oct 3 12:01:30.620868 [ 3.355570] evm: security.selinux Oct 3 12:01:30.632887 [ 3.358862] evm: security.SMACK64 (disabled) Oct 3 12:01:30.632887 [ 3.363111] evm: security.SMACK64EXEC (disabled) Oct 3 12:01:30.632887 [ 3.367714] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 12:01:30.644884 [ 3.372747] evm: security.SMACK64MMAP (disabled) Oct 3 12:01:30.644884 [ 3.377347] evm: security.apparmor Oct 3 12:01:30.644884 [ 3.380732] evm: security.ima Oct 3 12:01:30.656872 [ 3.383680] evm: security.capability Oct 3 12:01:30.656872 [ 3.387241] evm: HMAC attrs: 0x1 Oct 3 12:01:30.656872 [ 3.974886] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 12:01:31.244940 [ 3.980878] clk: Disabling unused clocks Oct 3 12:01:31.256825 [ 3.994599] Freeing unused kernel image (initmem) memory: 2048K Oct 3 12:01:31.268884 [ 3.999444] Checked W+X mappings: passed, no W+X pages found Oct 3 12:01:31.268884 [ 4.004724] Run /init as init process Oct 3 12:01:31.280952 [ 4.577752] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 12:01:31.856038 [ 4.626822] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 12:01:31.904807 [ 4.659571] usbcore: registered new interface driver usbfs Oct 3 12:01:31.928827 [ 4.665700] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 12:01:31.940870 [ 4.673371] usbcore: registered new interface driver hub Oct 3 12:01:31.952913 [ 4.678033] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 12:01:31.952913 [ 4.689280] usbcore: registered new device driver usb Oct 3 12:01:31.964792 [ 4.704235] phy phy-12130000.phy.1: phy_power_on was called before phy_init Oct 3 12:01:31.976854 [ 4.739265] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 12:01:32.012851 [ 4.746716] phy phy-12130000.phy.1: phy_power_on was called before phy_init Oct 3 12:01:32.021907 [ 4.753371] exynos-ohci 12120000.usb: USB Host Controller Oct 3 12:01:32.021907 [ 4.762547] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Oct 3 12:01:32.036923 [ 4.777790] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Oct 3 12:01:32.048856 [ 4.786731] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 12:01:32.060807 [ 4.801719] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Oct 3 12:01:32.071254 [ 4.825083] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Oct 3 12:01:32.100847 [ 4.837486] usb3503 usb-hub: switched to HUB mode Oct 3 12:01:32.112878 [ 4.838129] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 12:01:32.112878 [ 4.840730] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 12:01:32.124888 [ 4.847564] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 12:01:32.124888 [ 4.860807] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 12:01:32.136885 [ 4.867992] usb usb1: Product: EHCI Host Controller Oct 3 12:01:32.148991 [ 4.872851] usb usb1: Manufacturer: Linux 6.1.0-25-armmp ehci_hcd Oct 3 12:01:32.149062 [ 4.878926] usb usb1: SerialNumber: 12110000.usb Oct 3 12:01:32.149110 [ 4.887434] hub 1-0:1.0: USB hub found Oct 3 12:01:32.160950 [ 4.890979] hub 1-0:1.0: 3 ports detected Oct 3 12:01:32.160950 [ 4.895255] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 12:01:32.173074 [ 4.902117] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 12:01:32.185041 [ 4.909291] usb usb2: Product: USB Host Controller Oct 3 12:01:32.185102 [ 4.914055] usb usb2: Manufacturer: Linux 6.1.0-25-armmp ohci_hcd Oct 3 12:01:32.185153 [ 4.920134] usb usb2: SerialNumber: 12120000.usb Oct 3 12:01:32.197051 [ 4.926975] hub 2-0:1.0: USB hub found Oct 3 12:01:32.197110 [ 4.929338] hub 2-0:1.0: 3 ports detected Oct 3 12:01:32.208977 [ 5.177681] usb 1-3: new high-speed USB device number 2 using exynos-ehci Oct 3 12:01:32.449028 [ 5.226271] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 12:01:32.497019 [ 5.233584] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 12:01:32.509020 [ 5.240375] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 12:01:32.520885 [ 5.249245] xhci-hcd xhci-hcd.2.auto: irq 108, io mem 0x12000000 Oct 3 12:01:32.520885 [ 5.255388] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 12:01:32.532880 [ 5.260659] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 12:01:32.532880 [ 5.268291] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 12:01:32.544877 [ 5.274952] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 12:01:32.556884 [ 5.283039] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 12:01:32.556884 [ 5.290239] usb usb3: Product: xHCI Host Controller Oct 3 12:01:32.568882 [ 5.295098] usb usb3: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 12:01:32.568882 [ 5.301174] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 12:01:32.580890 [ 5.306624] hub 3-0:1.0: USB hub found Oct 3 12:01:32.580890 [ 5.309831] hub 3-0:1.0: 1 port detected Oct 3 12:01:32.580890 [ 5.314181] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 12:01:32.592895 [ 5.321890] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 12:01:32.604890 [ 5.329992] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 12:01:32.604890 [ 5.337198] usb usb4: Product: xHCI Host Controller Oct 3 12:01:32.616882 [ 5.341906] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Oct 3 12:01:32.616882 [ 5.342079] usb usb4: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 12:01:32.628891 [ 5.350226] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 3 12:01:32.628891 [ 5.356294] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 12:01:32.640886 [ 5.369041] hub 4-0:1.0: USB hub found Oct 3 12:01:32.640886 [ 5.370150] hub 1-3:1.0: USB hub found Oct 3 12:01:32.640886 [ 5.372068] hub 4-0:1.0: 1 port detected Oct 3 12:01:32.652855 [ 5.379901] hub 1-3:1.0: 3 ports detected Oct 3 12:01:32.652855 Starting system log daemon: syslogd, klogd. Oct 3 12:01:32.808765 /var/run/utmp: No such file or directory Oct 3 12:01:34.645740 [?1h=(B   Oct 3 12:01:34.693757  Oct 3 12:01:34.693818 [  (-*) ][ Oct 03 11:55 ] Oct 3 12:01:34.705795 [  (0*start) ][ Oct 03 11:55 ] Oct 3 12:01:34.729764 [  (0*start) ][ Oct 03 11:55 ] Oct 3 12:01:34.741788 [  (0*start) ][ Oct 03 11:55 ] Oct 3 12:01:34.753766 [  (0*start) ][ Oct 03 11:55 ]                        [  (0*start) ][ Oct 03 11:55 ][  (0*start) ][ Oct 03 11:55 ] Oct 3 12:01:34.813745 [ 0- start  (2*shell) ][ Oct 03 11:55 ] Oct 3 12:01:34.825729 [ 0- start  (2*shell) ][ Oct 03 11:55 ] Oct 3 12:01:34.837770 [ 0- start  (2*shell) ][ Oct 03 11:55 ] Oct 3 12:01:34.849793 [ 0- start  (2*shell) ][ Oct 03 11:55 ]                        [ 0- start  (2*shell) ][ Oct 03 11:55 ][ 0- start  (2*shell) ][ Oct 03 11:55 ] Oct 3 12:01:34.909759 [ 0 start 2- shell  (3*shell) ][ Oct 03 11:55 ] Oct 3 12:01:34.921770 [ 0 start 2- shell  (3*shell) ][ Oct 03 11:55 ] Oct 3 12:01:34.933759 [ 0 start 2- shell  (3*shell) ][ Oct 03 11:55 ] Oct 3 12:01:34.945769 [ 0 start 2- shell  (3*shell) ][ Oct 03 11:55 ]                        [ 0 start 2- shell  (3*shell) ][ Oct 03 11:55 ][ 0 start 2- shell  (3*shell) ][ Oct 03 11:55 ] Oct 3 12:01:35.005758 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 11:55 ] Oct 3 12:01:35.017752 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 11:55 ] Oct 3 12:01:35.029786 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 11:55 ] Oct 3 12:01:35.041769 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 11:55 ]                        [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 11:55 ][ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 11:55 ] Oct 3 12:01:35.101748 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 11:55 ] Oct 3 12:01:35.113775 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 11:55 ] Oct 3 12:01:35.125760 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 11:55 ] Oct 3 12:01:35.137763 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 11:55 ]                        [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 11:55 ][ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 11:55 ] Oct 3 12:01:35.197767 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 11:55 ] Oct 3 12:01:35.209771 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 11:55 ] Oct 3 12:01:35.221753 [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 11:55 ] Oct 3 12:01:35.677754 Detecting network hardware ... 2%... 95%... 100% Oct 3 12:01:37.393676 Detecting link on eth0; please wait... ... 0%... 10%... 20% Oct 3 12:01:42.276924 Waiting for link-local address... ... 8%... 16%... 25%... 33%... 100% Oct 3 12:01:43.300972 Attempting IPv6 autoconfiguration... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 75%... 83%... 91%... 100% Oct 3 12:01:49.377771 Configuring the network with DHCP ... 0%... 100% Oct 3 12:01:52.545720 [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 11:56 ] Checking the Debian archive mirror ... 25%... 50%... 75%... 100% Oct 3 12:02:00.625699 Loading additional components ... 0%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Oct 3 12:02:33.740825 Setting up the clock ... 0%... 3%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 12:02 ]... 100% Oct 3 12:02:36.504854 Loading additional components ... 50%... 100% Oct 3 12:02:38.148773 Detecting disks and all other hardware ... 2%... 95%... 100% Oct 3 12:02:42.772806 Loading additional components ... 12%... 25%... 37%... 50%... 62%... 75%... 87%... 100% Oct 3 12:02:49.713749 Loading additional components ... 25%... 50%... 75%... 100% Oct 3 12:02:52.077690 Starting up the partitioner ... 4%... 13%... 21%... 30%... 43%... 52%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 12:03 ]... 60%... 73%... 82%... 91%... 100% Oct 3 12:03:04.989719 Guided partitioning ... 16%... 33%... 50%... 66%... 83%... 100% Oct 3 12:03:13.325681 Starting up the partitioner ... 4%... 12%... 20%... 32%... 40%... 52%... 60%... 72%... 80%... 92%... 100% Oct 3 12:03:24.305761 Partitions formatting ... 33% Oct 3 12:03:33.049768 Partitions formatting Oct 3 12:03:41.997678 Partitions formatting Installing the base system ... 0%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 12:04 ]... 17%... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 12:05 ]... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 12:06 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 12:07 ]... 48%... 50%...  Oct 3 12:07:29.237742  60%... 70%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 12:08 ]... 79%... 83%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 12:09 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 12:10 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 12:11 ]... 91%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 12:12 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 12:13 ]... 100% Oct 3 12:13:10.101822 Configuring apt ... 7%... 14%... 14%... 21%... 35%... 42%... 50%... 61%... 71%. Oct 3 12:13:47.233740 ... 82%... 92%... 100% Oct 3 12:13:49.813700 Select and install software ... 1%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 12:14 ]... 10%... 13%... 20%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 12:15 ]... 30%... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 12:16 ]... 50%... Oct 3 12:16:38.968751 . 60%... 70%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 12:17 ]... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 12:18 ]... 88%... 90%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 12:19 ]... 94%... 100% Oct 3 12:19:41.660997 Finishing the installation ... 4%... 12%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 12:20 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 12:21 ]... 16%... 20%... 32%... 40%... 44%... Oct 3 12:21:52.209781  52%... 60%... 72%... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 12:22 ]... 92% The system is going down NOW! Sent SIGKILL to all processes Oct 3 12:22:03.149848 Requesting system reboot Oct 3 12:22:03.149928 [ 1236.913545] reboot: Re˙ Oct 3 12:22:04.505768 Oct 3 12:22:04.505847 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 12:22:04.517701 Oct 3 12:22:04.517701 CPU: Exynos5250@1000MHz Oct 3 12:22:04.517701 Oct 3 12:22:04.517701 Board: Arndale Oct 3 12:22:04.517701 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 12:22:04.529726 ready Oct 3 12:22:04.529784 DRAM: 2 GiB Oct 3 12:22:04.529826 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 12:22:04.541725 trace: enabled Oct 3 12:22:04.577698 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 12:22:04.937718 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 12:22:04.997757 In: serial Oct 3 12:22:04.997812 Out: serial Oct 3 12:22:04.997853 Err: serial Oct 3 12:22:04.997892 SCSI: ARNDALE SCSI INIT Oct 3 12:22:05.009732 Target spinup took 0 ms. Oct 3 12:22:05.009789 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 12:22:05.021760 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 12:22:05.021826 Net: Net Initialization Skipped Oct 3 12:22:05.021872 No ethernet found. Oct 3 12:22:05.021913 Hostname: arndale-westfield Oct 3 12:22:05.033741 Hit any key to stop autoboot: 2  1  0 Oct 3 12:22:06.953799 (Re)start USB... Oct 3 12:22:06.953875 USB0: USB EHCI 1.00 Oct 3 12:22:06.953918 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 12:22:12.562361 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 12:22:12.562461 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 12:22:13.001720 Waiting for Ethernet connection... done. Oct 3 12:22:14.649763 BOOTP broadcast 1 Oct 3 12:22:14.649841 EHCI timed out on TD - token=0x8008d80 Oct 3 12:22:19.449801 BOOTP broadcast 2 Oct 3 12:22:19.449880 DHCP client bound to address 10.149.64.45 (5006 ms) Oct 3 12:22:19.461708 Using asx0 device Oct 3 12:22:19.461751 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 12:22:19.461793 Filename 'pxelinux.0'. Oct 3 12:22:19.473767 Load address: 0x43e00000 Oct 3 12:22:19.473825 Loading: *### Oct 3 12:22:19.485767 2.2 MiB/s Oct 3 12:22:19.485821 done Oct 3 12:22:19.485861 Bytes transferred = 42430 (a5be hex) Oct 3 12:22:19.497817 missing environment variable: pxeuuid Oct 3 12:22:19.497876 Retrieving file: pxelinux.cfg/0A95402D Oct 3 12:22:19.497922 Using asx0 device Oct 3 12:22:19.497962 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 12:22:19.509821 Filename 'pxelinux.cfg/0A95402D'. Oct 3 12:22:19.509880 Load address: 0x51000000 Oct 3 12:22:19.509923 Loading: *# Oct 3 12:22:19.509962 31.3 KiB/s Oct 3 12:22:19.510002 done Oct 3 12:22:19.510040 Bytes transferred = 65 (41 hex) Oct 3 12:22:19.521811 Config file found Oct 3 12:22:19.521866 Ignoring unknown command: serial Oct 3 12:22:19.521911 1: local Oct 3 12:22:19.521951 scanning bus for devices... Oct 3 12:22:19.521992 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 12:22:19.557877 Type: Hard Disk Oct 3 12:22:19.557950 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 12:22:19.569815 Found 1 device(s). Oct 3 12:22:19.569871 Oct 3 12:22:19.569909 SCSI device 0: Oct 3 12:22:19.569950 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 12:22:19.581827 Type: Hard Disk Oct 3 12:22:19.581884 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 12:22:19.581934 ... is now current device Oct 3 12:22:19.581976 Scanning scsi 0... Oct 3 12:22:19.593650 Found U-Boot script /boot.scr Oct 3 12:22:19.701797 639 bytes read in 39 ms (15.6 KiB/s) Oct 3 12:22:19.749842 ## Executing script at 50000000 Oct 3 12:22:19.749923 Loading dtbs/exynos5250-arndale.dtb Oct 3 12:22:19.749968 46686 bytes read in 1577 ms (28.3 KiB/s) Oct 3 12:22:21.289810 Loading vmlinuz-6.1.0-25-armmp-lpae Oct 3 12:22:21.289895 5509632 bytes read in 186 ms (28.2 MiB/s) Oct 3 12:22:21.493765 Loading initrd.img-6.1.0-25-armmp-lpae Oct 3 12:22:21.493848 25732017 bytes read in 1874 ms (13.1 MiB/s) Oct 3 12:22:23.317786 Booting Oct 3 12:22:23.317862 Kernel image @ 0x42000000 [ 0x000000 - 0x541200 ] Oct 3 12:22:23.317910 ## Flattened Device Tree blob at 43000000 Oct 3 12:22:23.317955 Booting using the fdt blob at 0x43000000 Oct 3 12:22:23.329731 Loading Ramdisk to 4e775000, end 4ffff3b1 ... OK Oct 3 12:22:23.737664 Loading Device Tree to 4e766000, end 4e77465d ... OK Oct 3 12:22:23.749719 Oct 3 12:22:23.749762 Starting kernel ...(fake run for tracing) Oct 3 12:22:23.761707 Oct 3 12:22:23.761757 Oct 3 12:22:23.761779 Starting kernel ... Oct 3 12:22:23.761802 Oct 3 12:22:23.761823 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 12:22:29.921852 [ 0.000000] Linux version 6.1.0-25-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.106-3 (2024-08-26) Oct 3 12:22:29.933724 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=30c5387d Oct 3 12:22:29.945745 [ 0.000000] CPU: div instructions available: patching division code Oct 3 12:22:29.945781 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 12:22:29.957733 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 12:22:29.969760 [ 0.000000] Memory policy: Data cache writealloc Oct 3 12:22:29.969823 [ 0.000000] efi: UEFI not found. Oct 3 12:22:29.969870 [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000 Oct 3 12:22:29.981733 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 12:22:29.981733 [ 0.000000] Zone ranges: Oct 3 12:22:29.981733 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 12:22:29.993928 [ 0.000000] Normal empty Oct 3 12:22:29.994015 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 12:22:29.994084 [ 0.000000] Movable zone start for each node Oct 3 12:22:30.005891 [ 0.000000] Early memory node ranges Oct 3 12:22:30.005977 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 12:22:30.017846 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 12:22:30.017937 [ 0.000000] percpu: Embedded 18 pages/cpu s44820 r8192 d20716 u73728 Oct 3 12:22:30.029806 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 12:22:30.029892 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=ttySAC2,115200n8 Oct 3 12:22:30.041820 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 12:22:30.053793 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 12:22:30.053835 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 12:22:30.065754 [ 0.000000] Memory: 2015504K/2097152K available (12288K kernel code, 1717K rwdata, 3748K rodata, 2048K init, 383K bss, 65264K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 12:22:30.077761 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 12:22:30.089818 [ 0.000000] ftrace: allocating 39996 entries in 118 pages Oct 3 12:22:30.089884 [ 0.000000] ftrace: allocated 118 pages with 5 groups Oct 3 12:22:30.101803 [ 0.000000] trace event string verifier disabled Oct 3 12:22:30.101867 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 12:22:30.101916 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 12:22:30.113770 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 12:22:30.113770 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 12:22:30.125655 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 12:22:30.125655 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 12:22:30.137662 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 12:22:30.137662 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 12:22:30.149641 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 12:22:30.149641 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 12:22:30.161676 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 12:22:30.161676 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 12:22:30.173723 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 12:22:30.185719 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 12:22:30.185719 [ 0.002617] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 12:22:30.197648 [ 0.002632] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 12:22:30.209671 [ 0.002648] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 12:22:30.209671 [ 0.002659] Ignoring duplicate/late registration of read_current_timer delay Oct 3 12:22:30.221887 [ 0.003022] Console: colour dummy device 80x30 Oct 3 12:22:30.221971 [ 0.003065] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 12:22:30.233668 [ 0.003079] CPU: Testing write buffer coherency: ok Oct 3 12:22:30.245787 [ 0.003121] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 12:22:30.245787 [ 0.003129] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 12:22:30.257629 [ 0.003135] pid_max: default: 32768 minimum: 301 Oct 3 12:22:30.257629 [ 0.003505] LSM: Security Framework initializing Oct 3 12:22:30.269671 [ 0.003577] landlock: Up and running. Oct 3 12:22:30.269671 [ 0.003582] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 12:22:30.281682 [ 0.003770] AppArmor: AppArmor initialized Oct 3 12:22:30.281682 [ 0.003782] TOMOYO Linux initialized Oct 3 12:22:30.281682 [ 0.003828] LSM support for eBPF active Oct 3 12:22:30.293718 [ 0.004074] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 12:22:30.293718 [ 0.004088] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 12:22:30.305645 [ 0.005506] /cpus/cpu@0 missing clock-frequency property Oct 3 12:22:30.305645 [ 0.005533] /cpus/cpu@1 missing clock-frequency property Oct 3 12:22:30.317646 [ 0.005546] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 12:22:30.317646 [ 0.006499] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 12:22:30.329686 [ 0.006506] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 12:22:30.329686 [ 0.006609] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 12:22:30.341688 [ 0.006615] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 12:22:30.341688 [ 0.006754] Setting up static identity map for 0x40400000 - 0x404000ac Oct 3 12:22:30.353740 [ 0.007914] rcu: Hierarchical SRCU implementation. Oct 3 12:22:30.353740 [ 0.007920] rcu: Max phase no-delay instances is 1000. Oct 3 12:22:30.365740 [ 0.010052] EFI services will not be available. Oct 3 12:22:30.365740 [ 0.010398] smp: Bringing up secondary CPUs ... Oct 3 12:22:30.377745 [ 0.011144] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 12:22:30.377745 [ 0.011156] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 12:22:30.389689 [ 0.011288] smp: Brought up 1 node, 2 CPUs Oct 3 12:22:30.389689 [ 0.011296] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 12:22:30.401657 [ 0.011304] CPU: All CPU(s) started in HYP mode. Oct 3 12:22:30.401657 [ 0.011308] CPU: Virtualization extensions available. Oct 3 12:22:30.401657 [ 0.012170] devtmpfs: initialized Oct 3 12:22:30.413762 [ 0.023162] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 12:22:30.413762 [ 0.023394] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 12:22:30.425724 [ 0.023419] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 12:22:30.437657 [ 0.023955] pinctrl core: initialized pinctrl subsystem Oct 3 12:22:30.437657 [ 0.024708] DMI not present or invalid. Oct 3 12:22:30.437657 [ 0.025384] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 12:22:30.449730 [ 0.026932] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 12:22:30.461721 [ 0.028447] audit: initializing netlink subsys (disabled) Oct 3 12:22:30.461721 [ 0.028652] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 Oct 3 12:22:30.473620 [ 0.029838] thermal_sys: Registered thermal governor 'fair_share' Oct 3 12:22:30.473620 [ 0.029845] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 12:22:30.485658 [ 0.029850] thermal_sys: Registered thermal governor 'step_wise' Oct 3 12:22:30.485658 [ 0.029854] thermal_sys: Registered thermal governor 'user_space' Oct 3 12:22:30.497672 [ 0.029859] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 12:22:30.497672 [ 0.030059] No ATAGs? Oct 3 12:22:30.497672 [ 0.030125] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 12:22:30.509701 [ 0.030133] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 12:22:30.521726 [ 0.031214] Serial: AMBA PL011 UART driver Oct 3 12:22:30.521726 [ 0.080576] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 12:22:30.533679 [ 0.087536] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 12:22:30.533679 [ 0.091747] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages Oct 3 12:22:30.545692 [ 0.091755] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page Oct 3 12:22:30.545692 [ 0.099282] iommu: Default domain type: Translated Oct 3 12:22:30.557739 [ 0.099290] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 12:22:30.557739 [ 0.100248] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 12:22:30.569724 [ 0.100761] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 12:22:30.569724 [ 0.100772] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 12:22:30.581650 [ 0.101284] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 12:22:30.581650 [ 0.101314] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 12:22:30.593742 [ 0.101561] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 12:22:30.605758 [ 0.102059] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 12:22:30.605758 [ 0.102070] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 12:22:30.605758 [ 0.102446] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 12:22:30.617876 [ 0.102738] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 12:22:30.617913 [ 0.102748] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 12:22:30.629815 [ 0.103043] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 12:22:30.629865 [ 0.103179] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 12:22:30.641673 [ 0.103189] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 12:22:30.641678 [ 0.103376] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 12:22:30.653772 [ 0.103594] pps_core: LinuxPPS API ver. 1 registered Oct 3 12:22:30.653903 [ 0.103599] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 12:22:30.665853 [ 0.103616] PTP clock support registered Oct 3 12:22:30.665853 [ 0.105115] NetLabel: Initializing Oct 3 12:22:30.665853 [ 0.105120] NetLabel: domain hash size = 128 Oct 3 12:22:30.677775 [ 0.105126] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 12:22:30.677861 [ 0.105180] NetLabel: unlabeled traffic allowed by default Oct 3 12:22:30.689730 [ 0.105352] vgaarb: loaded Oct 3 12:22:30.689784 [ 0.106291] clocksource: Switched to clocksource mct-frc Oct 3 12:22:30.689811 [ 0.106872] VFS: Disk quotas dquot_6.6.0 Oct 3 12:22:30.701786 [ 0.106957] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 12:22:30.701878 [ 0.107776] AppArmor: AppArmor Filesystem Enabled Oct 3 12:22:30.713769 [ 0.117711] NET: Registered PF_INET protocol family Oct 3 12:22:30.713791 [ 0.117930] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 12:22:30.725856 [ 0.119550] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 12:22:30.725945 [ 0.119651] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 12:22:30.741900 [ 0.119676] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 12:22:30.741987 [ 0.119776] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 12:22:30.753848 [ 0.120007] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 12:22:30.753926 [ 0.120248] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 12:22:30.765775 [ 0.120326] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 12:22:30.777716 [ 0.120366] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 12:22:30.777770 [ 0.120615] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 12:22:30.789892 [ 0.120653] NET: Registered PF_XDP protocol family Oct 3 12:22:30.789976 [ 0.120667] PCI: CLS 0 bytes, default 64 Oct 3 12:22:30.790023 [ 0.121156] Trying to unpack rootfs image as initramfs... Oct 3 12:22:30.801849 [ 0.121510] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 12:22:30.801937 [ 0.126908] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 12:22:30.813862 [ 0.193996] Initialise system trusted keyrings Oct 3 12:22:30.813946 [ 0.194120] Key type blacklist registered Oct 3 12:22:30.825827 [ 0.195407] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 12:22:30.825907 [ 0.203376] zbud: loaded Oct 3 12:22:30.837746 [ 0.204693] integrity: Platform Keyring initialized Oct 3 12:22:30.837796 [ 0.204726] integrity: Machine keyring initialized Oct 3 12:22:30.837822 [ 0.204736] Key type asymmetric registered Oct 3 12:22:30.849742 [ 0.204744] Asymmetric key parser 'x509' registered Oct 3 12:22:30.849803 [ 1.425156] Freeing initrd memory: 25132K Oct 3 12:22:30.849850 [ 1.447499] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 12:22:30.861744 [ 1.447766] bounce: pool size: 64 pages Oct 3 12:22:30.861803 [ 1.447960] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 12:22:30.873780 [ 1.448126] io scheduler mq-deadline registered Oct 3 12:22:30.873842 [ 1.453258] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 12:22:30.885779 [ 1.474240] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 12:22:30.897749 [ 1.474252] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 12:22:30.897824 [ 1.476578] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 12:22:30.909815 [ 1.476589] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 12:22:30.921810 [ 1.477397] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 12:22:30.921883 [ 1.477406] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 12:22:30.933846 [ 1.478218] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 12:22:30.945779 [ 1.478227] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 12:22:30.945832 [ 1.480598] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 12:22:30.957848 [ 1.483448] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 12:22:30.969755 [ 1.486177] Serial: AMBA driver Oct 3 12:22:30.969821 [ 1.486436] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 12:22:30.981855 [ 1.486910] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 12:22:30.993944 [ 1.487375] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 12:22:30.994081 [ 2.568114] printk: console [ttySAC2] enabled Oct 3 12:22:31.005912 [ 2.572928] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 12:22:31.006058 [ 2.583598] STM32 USART driver initialized Oct 3 12:22:31.017741 [ 2.598067] mousedev: PS/2 mouse device common for all mice Oct 3 12:22:31.029728 [ 2.629422] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 12:22:31.065733 [ 2.638049] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T12:22:31 UTC (1727958151) Oct 3 12:22:31.077726 [ 2.647905] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 12:22:31.077790 [ 2.655400] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 12:22:31.089750 [ 2.663394] NET: Registered PF_INET6 protocol family Oct 3 12:22:31.101660 [ 2.687380] Segment Routing with IPv6 Oct 3 12:22:31.113702 [ 2.689624] In-situ OAM (IOAM) with IPv6 Oct 3 12:22:31.125768 [ 2.693612] mip6: Mobile IPv6 Oct 3 12:22:31.125832 [ 2.696499] NET: Registered PF_PACKET protocol family Oct 3 12:22:31.125881 [ 2.701641] mpls_gso: MPLS GSO support Oct 3 12:22:31.137736 [ 2.705654] ThumbEE CPU extension supported. Oct 3 12:22:31.137756 [ 2.709508] Registering SWP/SWPB emulation handler Oct 3 12:22:31.137804 [ 2.714771] registered taskstats version 1 Oct 3 12:22:31.149849 [ 2.718385] Loading compiled-in X.509 certificates Oct 3 12:22:31.149930 [ 3.178206] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 12:22:31.617835 [ 3.185547] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 12:22:31.629773 [ 3.196662] zswap: loaded using pool lzo/zbud Oct 3 12:22:31.629826 [ 3.200516] Key type .fscrypt registered Oct 3 12:22:31.629852 [ 3.203880] Key type fscrypt-provisioning registered Oct 3 12:22:31.641865 [ 3.228168] Key type encrypted registered Oct 3 12:22:31.653730 [ 3.230762] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 12:22:31.665847 [ 3.236250] ima: No TPM chip found, activating TPM-bypass! Oct 3 12:22:31.665924 [ 3.241693] ima: Allocated hash algorithm: sha256 Oct 3 12:22:31.677903 [ 3.246402] ima: No architecture policies found Oct 3 12:22:31.677988 [ 3.250938] evm: Initialising EVM extended attributes: Oct 3 12:22:31.689841 [ 3.255988] evm: security.selinux Oct 3 12:22:31.689919 [ 3.259279] evm: security.SMACK64 (disabled) Oct 3 12:22:31.689966 [ 3.263532] evm: security.SMACK64EXEC (disabled) Oct 3 12:22:31.701798 [ 3.268130] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 12:22:31.701872 [ 3.273164] evm: security.SMACK64MMAP (disabled) Oct 3 12:22:31.701919 [ 3.277761] evm: security.apparmor Oct 3 12:22:31.713759 [ 3.281150] evm: security.ima Oct 3 12:22:31.713801 [ 3.284100] evm: security.capability Oct 3 12:22:31.713858 [ 3.287665] evm: HMAC attrs: 0x1 Oct 3 12:22:31.725662 [ 3.875625] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 12:22:32.313754 [ 3.881588] clk: Disabling unused clocks Oct 3 12:22:32.313836 [ 3.894493] Freeing unused kernel image (initmem) memory: 2048K Oct 3 12:22:32.325779 [ 3.899351] Checked W+X mappings: passed, no W+X pages found Oct 3 12:22:32.337760 [ 3.904614] Run /init as init process Oct 3 12:22:32.337828 Loading, please wait... Oct 3 12:22:32.361688 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 12:22:32.445800 [ 4.807392] usbcore: registered new interface driver usbfs Oct 3 12:22:33.237815 [ 4.811629] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 12:22:33.249832 [ 4.819862] usbcore: registered new interface driver hub Oct 3 12:22:33.249901 [ 4.825079] usbcore: registered new device driver usb Oct 3 12:22:33.261813 [ 4.830226] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 12:22:33.261899 [ 4.852151] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 12:22:33.285847 [ 4.860871] phy phy-12130000.phy.4: phy_power_on was called before phy_init Oct 3 12:22:33.297768 [ 4.868866] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 12:22:33.297839 [ 4.874412] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Oct 3 12:22:33.309785 [ 4.882029] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Oct 3 12:22:33.309860 [ 4.895870] Synopsys Designware Multimedia Card Interface Driver Oct 3 12:22:33.333721 [ 4.905164] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 12:22:33.333761 [ 4.925754] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 12:22:33.357798 [ 4.938133] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 12:22:33.369687 [ 4.959573] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 12:22:33.393863 [ 4.966419] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 12:22:33.405860 [ 4.973613] usb usb1: Product: EHCI Host Controller Oct 3 12:22:33.405933 [ 4.978452] usb usb1: Manufacturer: Linux 6.1.0-25-armmp-lpae ehci_hcd Oct 3 12:22:33.417781 [ 4.984975] usb usb1: SerialNumber: 12110000.usb Oct 3 12:22:33.417830 [ 4.990193] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 12:22:33.429789 [ 4.996047] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 12:22:33.429839 [ 5.002849] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 12:22:33.441756 [ 5.012061] hub 1-0:1.0: USB hub found Oct 3 12:22:33.441821 [ 5.012482] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 12:22:33.453821 [ 5.014596] hub 1-0:1.0: 3 ports detected Oct 3 12:22:33.453895 [ 5.020796] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 12:22:33.453944 [ 5.026969] phy phy-12130000.phy.4: phy_power_on was called before phy_init Oct 3 12:22:33.465791 [ 5.056565] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo Oct 3 12:22:33.489868 [ 5.084352] exynos-ohci 12120000.usb: USB Host Controller Oct 3 12:22:33.513786 [ 5.108619] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Oct 3 12:22:33.549773 [ 5.114379] mmc_host mmc0: card is polling. Oct 3 12:22:33.549859 [ 5.119392] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Oct 3 12:22:33.549910 [ 5.129070] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 109,32 bit host data width,128 deep fifo Oct 3 12:22:33.561753 [ 5.150849] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 12:22:33.585775 [ 5.174368] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 12:22:33.609772 [ 5.190695] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 12:22:33.621795 [ 5.197555] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 12:22:33.633757 [ 5.204729] usb usb2: Product: USB Host Controller Oct 3 12:22:33.633818 [ 5.209523] usb usb2: Manufacturer: Linux 6.1.0-25-armmp-lpae ohci_hcd Oct 3 12:22:33.645776 [ 5.216035] usb usb2: SerialNumber: 12120000.usb Oct 3 12:22:33.645842 [ 5.265514] SCSI subsystem initialized Oct 3 12:22:33.693814 [ 5.292376] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 12:22:33.729738 [ 5.304459] mmc0: new DDR MMC card at address 0001 Oct 3 12:22:33.741797 [ 5.307880] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 12:22:33.741874 [ 5.310148] hub 2-0:1.0: USB hub found Oct 3 12:22:33.753739 [ 5.322480] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Oct 3 12:22:33.753802 [ 5.328819] hub 2-0:1.0: 3 ports detected Oct 3 12:22:33.765762 [ 5.331458] mmc1: new high speed SDHC card at address aaaa Oct 3 12:22:33.765830 [ 5.332033] mmcblk0: p1 p2 p3 p4 Oct 3 12:22:33.765875 [ 5.348410] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Oct 3 12:22:33.777705 [ 5.357581] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Oct 3 12:22:33.789716 [ 5.371897] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (241:0) Oct 3 12:22:33.801739 [ 5.378113] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Oct 3 12:22:33.813647 [ 5.388891] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 12:22:33.825749 [ 5.397039] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 12:22:33.837687 [ 5.412951] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 12:22:33.849710 [ 5.442832] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 12:22:33.873815 [ 5.448519] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Oct 3 12:22:33.885749 [ 5.457352] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 12:22:33.897761 [ 5.469442] scsi host0: ahci-dwc Oct 3 12:22:33.897818 [ 5.471539] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 12:22:33.909745 [ 5.471820] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 111 Oct 3 12:22:33.909818 [ 5.477267] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 12:22:33.921743 [ 5.497603] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 12:22:33.933787 [ 5.505746] xhci-hcd xhci-hcd.2.auto: irq 110, io mem 0x12000000 Oct 3 12:22:33.945746 [ 5.511887] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 12:22:33.945810 [ 5.517076] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 12:22:33.957772 [ 5.525145] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 12:22:33.957836 [ 5.531477] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 12:22:33.969688 [ 5.539413] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 12:22:33.969688 [ 5.546599] usb usb3: Product: xHCI Host Controller Oct 3 12:22:33.981761 [ 5.551463] usb usb3: Manufacturer: Linux 6.1.0-25-armmp-lpae xhci-hcd Oct 3 12:22:33.981827 [ 5.557967] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 12:22:33.993669 [ 5.563560] hub 3-0:1.0: USB hub found Oct 3 12:22:33.993703 [ 5.566686] hub 3-0:1.0: 1 port detected Oct 3 12:22:33.993728 [ 5.571034] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 12:22:34.005792 [ 5.578793] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 12:22:34.017763 [ 5.586801] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 12:22:34.017832 [ 5.593992] usb usb4: Product: xHCI Host Controller Oct 3 12:22:34.029799 [ 5.598862] usb usb4: Manufacturer: Linux 6.1.0-25-armmp-lpae xhci-hcd Oct 3 12:22:34.029873 [ 5.605362] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 12:22:34.041707 [ 5.611480] hub 4-0:1.0: USB hub found Oct 3 12:22:34.041742 [ 5.614110] hub 4-0:1.0: 1 port detected Oct 3 12:22:34.041767 [ 5.645982] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 12:22:34.077856 [ 5.716383] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 12:22:34.149923 [ 5.825760] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 12:22:34.257722 [ 5.933735] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 12:22:34.365884 [ 5.954333] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 12:22:34.389808 [ 5.959934] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 12:22:34.389900 [ 5.965753] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 12:22:34.401846 [ 5.973858] ata1.00: configured for UDMA/133 Oct 3 12:22:34.401920 [ 5.977132] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 12:22:34.413733 [ 6.041683] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 12:22:34.473842 [ 6.089406] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 12:22:34.521788 [ 6.095520] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 12:22:34.533896 [ 6.102518] sd 0:0:0:0: [sda] Write Protect is off Oct 3 12:22:34.533967 [ 6.105960] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 12:22:34.545836 [ 6.115031] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 12:22:34.545907 [ 6.135496] sda: sda1 sda2 < sda5 > Oct 3 12:22:34.569808 [ 6.140044] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 12:22:34.569906 [ 6.149665] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 12:22:34.581798 [ 6.257648] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 12:22:34.689925 [ 6.365645] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 12:22:34.797854 [ 6.473659] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 12:22:34.905927 [ 6.581675] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 12:22:35.013914 [ 6.990142] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 12:22:35.421954 [ 7.097749] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 12:22:35.529870 [ 7.182315] random: crng init done Oct 3 12:22:35.613863 [ 7.291316] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. Oct 3 12:22:35.733768 [ 7.302158] device-mapper: uevent: version 1.0.3 Oct 3 12:22:35.733819 [ 7.306991] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Oct 3 12:22:35.745756 [ 7.707086] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 12:22:36.141813 Begin: Loading essential drivers ... done. Oct 3 12:22:36.321711 Begin: Running /scripts/init-premount ... done. Oct 3 12:22:39.333797 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 12:22:39.345790 Begin: Running /scripts/local-premount ... done. Oct 3 12:22:39.429576 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 12:22:39.477712 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 12:22:39.585795 /dev/mapper/arndale--westfield--vg-root: clean, 39343/1220608 files, 378258/4882432 blocks Oct 3 12:22:39.789756 done. Oct 3 12:22:39.801708 [ 11.510105] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 12:22:39.945644 [ 11.697943] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 12:22:40.137764 done. Oct 3 12:22:40.137842 Begin: Running /scripts/local-bottom ... done. Oct 3 12:22:40.173708 Begin: Running /scripts/init-bottom ... done. Oct 3 12:22:40.221683 [ 12.031174] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. Oct 3 12:22:40.461795 INIT: version 3.06 booting Oct 3 12:22:40.729700 INIT: No inittab.d directory found Oct 3 12:22:40.801698 Using makefile-style concurrent boot in runlevel S. Oct 3 12:22:41.137739 Starting hotplug events dispatcher: systemd-udevd. Oct 3 12:22:42.733700 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 12:22:42.973757 Synthesizing the initial hotplug events (devices)...done. Oct 3 12:22:43.549765 Waiting for /dev to be fully populated...[ 15.344115] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 12:22:43.777784 [ 15.369720] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Oct 3 12:22:43.801766 [ 15.522858] sd 0:0:0:0: Attached scsi generic sg0 type 0 Oct 3 12:22:43.957720 [ 15.556775] panfrost 11800000.gpu: clock rate = 533000000 Oct 3 12:22:43.993683 [ 15.584244] panfrost 11800000.gpu: mali-t600 id 0x600 major 0x0 minor 0x0 status 0x1 Oct 3 12:22:44.017761 [ 15.590544] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,31b4dfff Oct 3 12:22:44.029753 [ 15.598732] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 Oct 3 12:22:44.041731 [ 15.610404] panfrost 11800000.gpu: shader_present=0xf l2_present=0x1 Oct 3 12:22:44.041795 [ 15.626832] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 0 Oct 3 12:22:44.065699 [ 15.650340] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 12:22:44.089709 [ 15.719070] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 12:22:44.161719 [ 15.758339] usb3503 usb-hub: switched to HUB mode Oct 3 12:22:44.185718 [ 15.761613] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 12:22:44.197713 [ 15.827511] blk_print_req_error: 6 callbacks suppressed Oct 3 12:22:44.257627 [ 15.827522] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 12:22:44.269589 [ 15.940905] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 12:22:44.377716 [ 16.049193] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 12:22:44.485764 [ 16.082410] usb 1-3: new high-speed USB device number 2 using exynos-ehci Oct 3 12:22:44.509787 [ 16.157309] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 12:22:44.593674 [ 16.247055] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Oct 3 12:22:44.677649 [ 16.253933] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 3 12:22:44.689715 [ 16.262883] hub 1-3:1.0: USB hub found Oct 3 12:22:44.689747 [ 16.265484] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 12:22:44.701688 [ 16.275150] hub 1-3:1.0: 3 ports detected Oct 3 12:22:44.701720 [ 16.374740] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 12:22:44.809667 [ 16.403660] OF: graph: no port node found in /soc/hdmi@14530000 Oct 3 12:22:44.833612 [ 16.482728] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 12:22:44.917700 [ 16.571072] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 12:22:45.001682 [ 16.590929] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 12:22:45.025671 [ 16.693440] usb 1-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=77.32 Oct 3 12:22:45.121726 [ 16.700640] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Oct 3 12:22:45.133697 [ 16.708142] usb 1-3.2: Product: USB2.0 Hub Oct 3 12:22:45.133729 [ 16.716218] hub 1-3.2:1.0: USB hub found Oct 3 12:22:45.145667 [ 16.719200] hub 1-3.2:1.0: 4 ports detected Oct 3 12:22:45.145699 [ 17.013642] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 12:22:45.445688 [ 17.030630] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 12:22:45.457682 [ 17.121523] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 12:22:45.553685 [ 17.148314] usb 1-3.2.4: New USB device found, idVendor=0b95, idProduct=772a, bcdDevice= 0.01 Oct 3 12:22:45.577724 [ 17.155527] usb 1-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Oct 3 12:22:45.589710 [ 17.163010] usb 1-3.2.4: Product: AX88772 Oct 3 12:22:45.589742 [ 17.167047] usb 1-3.2.4: Manufacturer: ASIX Elec. Corp. Oct 3 12:22:45.601713 [ 17.172329] usb 1-3.2.4: SerialNumber: 000001 Oct 3 12:22:45.601713 [ 17.600640] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 12:22:46.033780 [ 17.733214] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 12:22:46.165687 [ 18.256958] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 12:22:46.693725 [ 18.272502] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Oct 3 12:22:46.705701 [ 18.284509] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, da:03:98:f4:b8:11 Oct 3 12:22:46.717701 [ 18.300502] usbcore: registered new interface driver asix Oct 3 12:22:46.729670 done. Oct 3 12:22:47.257696 [ 19.369181] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 12:22:47.797776 Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). Oct 3 12:22:47.857667 Checking file systems.../dev/sda1: clean, 922/61056 files, 25402/243968 blocks Oct 3 12:22:49.477674 done. Oct 3 12:22:49.513590 Cleaning up temporary files... /tmp. Oct 3 12:22:49.813674 [ 21.693225] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 12:22:50.125666 [ 21.742231] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 12:22:50.173716 [ 21.941826] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k FS Oct 3 12:22:50.377668 Mounting local filesystems...done. Oct 3 12:22:50.737654 Activating swapfile swap, if any...done. Oct 3 12:22:50.737671 Cleaning up temporary files.... Oct 3 12:22:50.773629 Starting Setting kernel variables: sysctl. Oct 3 12:22:50.965637 [ 23.092661] audit: type=1400 audit(1727958171.588:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=897 comm="apparmor_parser" Oct 3 12:22:51.529785 [ 23.111225] audit: type=1400 audit(1727958171.600:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=896 comm="apparmor_parser" Oct 3 12:22:51.553710 [ 23.124788] audit: type=1400 audit(1727958171.604:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=897 comm="apparmor_parser" Oct 3 12:22:51.565670 [ 23.333981] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 12:22:51.769647 [ 23.495638] audit: type=1400 audit(1727958171.992:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=937 comm="apparmor_parser" Oct 3 12:22:51.940903 [ 23.509456] audit: type=1400 audit(1727958171.992:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=937 comm="apparmor_parser" Oct 3 12:22:51.952881 [ 23.524106] audit: type=1400 audit(1727958171.996:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=937 comm="apparmor_parser" Oct 3 12:22:51.964877 [ 23.874550] audit: type=1400 audit(1727958172.372:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=934 comm="apparmor_parser" Oct 3 12:22:52.324896 [ 23.891207] audit: type=1400 audit(1727958172.372:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=945 comm="apparmor_parser" Oct 3 12:22:52.336901 [ 23.906247] audit: type=1400 audit(1727958172.380:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=934 comm="apparmor_parser" Oct 3 12:22:52.349039 [ 23.923548] audit: type=1400 audit(1727958172.384:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=934 comm="apparmor_parser" Oct 3 12:22:52.372849 Starting: AppArmorLoading AppArmor profiles...done. Oct 3 12:22:52.372849 . Oct 3 12:22:52.372849 [ 25.480024] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 12:22:53.908870 [ 25.486195] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 3 12:22:53.920860 Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1 Oct 3 12:22:55.588901 Copyright 2004-2022 Internet Systems Consortium. Oct 3 12:22:55.588901 All rights reserved. Oct 3 12:22:55.588901 For info, please visit https://www.isc.org/software/dhcp/ Oct 3 12:22:55.600892 Oct 3 12:22:55.600892 Listening on LPF/eth0/a6:46:13:77:e8:2f Oct 3 12:22:55.600892 Sending on LPF/eth0/a6:46:13:77:e8:2f Oct 3 12:22:55.600892 Sending on Socket/fallback Oct 3 12:22:55.612900 Created duid "\000\001\000\001.\221I\033\246F\023w\350/". Oct 3 12:22:55.612900 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 Oct 3 12:22:55.612900 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 Oct 3 12:22:56.284907 DHCPOFFER of 10.149.64.45 from 10.149.64.4 Oct 3 12:22:56.284907 DHCPREQUEST for 10.149.64.45 on eth0 to 255.255.255.255 port 67 Oct 3 12:22:56.284907 DHCPACK of 10.149.64.45 from 10.149.64.4 Oct 3 12:22:56.296864 bound to 10.149.64.45 -- renewal in 251 seconds. Oct 3 12:22:56.296864 done. Oct 3 12:22:56.296864 Cleaning up temporary files.... Oct 3 12:22:56.344835 Starting nftables: none Oct 3 12:22:56.740836 [ 28.386871] exynos4-fb 14400000.fimd: deferred probe timeout, ignoring dependency Oct 3 12:22:56.825003 [ 28.397726] exynos-mixer 14450000.mixer: deferred probe timeout, ignoring dependency Oct 3 12:22:56.836903 [ 28.405605] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations Oct 3 12:22:56.836903 [ 28.411963] exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm]) Oct 3 12:22:56.848902 [ 28.420176] exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm]) Oct 3 12:22:56.860899 [ 28.429114] exynos-drm exynos-drm: bound 14500000.dsi (ops hdmi_enable [exynosdrm]) Oct 3 12:22:56.860899 [ 28.435546] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm]) Oct 3 12:22:56.872994 [ 28.443473] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 12:22:56.872994 [ 28.449889] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 12:22:56.884905 [ 28.456771] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 Oct 3 12:22:56.896838 . Oct 3 12:22:57.220827 INIT: Entering runlevel: 2 Oct 3 12:22:57.268801 Using makefile-style concurrent boot in runlevel 2. Oct 3 12:22:57.328835 Starting Apache httpd web server: apache2. Oct 3 12:22:59.316827 Starting periodic command scheduler: cron. Oct 3 12:22:59.676930 Starting NTP server: ntpd2024-10-03T12:22:59 ntpd[1134]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 12:22:59.688885 2024-10-03T12:22:59 ntpd[1134]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 12:22:59.688885 . Oct 3 12:22:59.688885 Starting system message bus: dbus. Oct 3 12:23:00.060849 Starting OpenBSD Secure Shell server: sshd. Oct 3 12:23:00.912959 Oct 3 12:23:01.972822 Debian GNU/Linux 12 arndale-westfield ttySAC2 Oct 3 12:23:01.984860 Oct 3 12:23:01.984860 arndale-westfield login: INIT: Switching to r INIT: No inittab.d directorUsing makefile-style concurrent boot in runlevel 6. Oct 3 12:28:07.468877 Stopping SMP IRQ Balancer: irqbalance. Oct 3 12:28:07.540840 Stopping nftables: none. Oct 3 12:28:07.552814 Stopping hotplug events dispatcher: systemd-udevd. Oct 3 12:28:07.576834 Saving the system clock to /dev/rtc0. Oct 3 12:28:08.021052 Hardware Clock updated to Thu Oct 3 12:28:08 UTC 2024. Oct 3 12:28:08.021133 Stopping Apache httpd web server: apache2. Oct 3 12:28:08.708829 Asking all remaining processes to terminate...done. Oct 3 12:28:09.041760 All processes ended within 1 seconds...done. Oct 3 12:28:09.041827 Deconfiguring network interfaces...ifdown: ignoring unknown interface eth0=eth0 Oct 3 12:28:09.149691 done. Oct 3 12:28:09.149744 [ 340.963354] EXT4-fs (sda1): unmounting filesystem. Oct 3 12:28:09.389712 Deactivating swap...done. Oct 3 12:28:09.461697 Unmounting local filesystems...done. Oct 3 12:28:09.461756 [ 341.373072] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 12:28:09.797731 Will now restart. Oct 3 12:28:10.109705 [ 341.703078] asix 1-3.2.4:1.0 eth0: Link is Down Oct 3 12:28:10.133706 [ 341.743273] sd 0:0:0:0: [sda] Synchronizing SCSI cache Oct 3 12:28:10.169763 [ 341.771055] wake enabled for irq 101 (gpx1-4) Oct 3 12:28:10.193723 [ 341.773940] wake enabled for irq 102 (gpx1-5) Oct 3 12:28:10.205780 [ 341.778308] wake enabled for irq 103 (gpx1-6) Oct 3 12:28:10.205840 [ 341.782635] wake enabled for irq 104 (gpx1-7) Oct 3 12:28:10.217771 [ 341.786977] wake enabled for irq 105 (gpx2-0) Oct 3 12:28:10.217831 [ 341.791321] wake enabled for irq 106 (gpx2-1) Oct 3 12:28:10.217880 [ 341.796141] reboot: Re˙ Oct 3 12:28:10.553731 Oct 3 12:28:10.553786 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 12:28:10.565787 Oct 3 12:28:10.565840 CPU: Exynos5250@1000MHz Oct 3 12:28:10.565885 Oct 3 12:28:10.565924 Board: Arndale Oct 3 12:28:10.565965 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 12:28:10.577692 ready Oct 3 12:28:10.577746 DRAM: 2 GiB Oct 3 12:28:10.577789 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 12:28:10.589776 trace: enabled Oct 3 12:28:10.625746 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 12:28:10.985672 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 12:28:11.045810 In: serial Oct 3 12:28:11.045865 Out: serial Oct 3 12:28:11.045908 Err: serial Oct 3 12:28:11.045949 SCSI: ARNDALE SCSI INIT Oct 3 12:28:11.057773 Target spinup took 0 ms. Oct 3 12:28:11.057832 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 12:28:11.057883 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 12:28:11.069811 Net: Net Initialization Skipped Oct 3 12:28:11.069869 No ethernet found. Oct 3 12:28:11.069912 Hostname: arndale-westfield Oct 3 12:28:11.069955 Hit any key to stop autoboot: 2  1  0 Oct 3 12:28:13.001781 (Re)start USB... Oct 3 12:28:13.001840 USB0: USB EHCI 1.00 Oct 3 12:28:13.001884 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 12:28:18.605832 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 12:28:18.605906 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 12:28:19.049817 Waiting for Ethernet connection... done. Oct 3 12:28:20.645795 BOOTP broadcast 1 Oct 3 12:28:20.657739 EHCI timed out on TD - token=0x8008d80 Oct 3 12:28:25.449776 BOOTP broadcast 2 Oct 3 12:28:25.461749 DHCP client bound to address 10.149.64.45 (5006 ms) Oct 3 12:28:25.461811 Using asx0 device Oct 3 12:28:25.461852 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 12:28:25.461900 Filename 'pxelinux.0'. Oct 3 12:28:25.473703 Load address: 0x43e00000 Oct 3 12:28:25.473759 Loading: *### Oct 3 12:28:25.485684 2.4 MiB/s Oct 3 12:28:25.485738 done Oct 3 12:28:25.485778 Bytes transferred = 42430 (a5be hex) Oct 3 12:28:25.497730 missing environment variable: pxeuuid Oct 3 12:28:25.497788 Retrieving file: pxelinux.cfg/0A95402D Oct 3 12:28:25.497834 Using asx0 device Oct 3 12:28:25.497875 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 12:28:25.509774 Filename 'pxelinux.cfg/0A95402D'. Oct 3 12:28:25.509832 Load address: 0x51000000 Oct 3 12:28:25.509875 Loading: *# Oct 3 12:28:25.509914 31.3 KiB/s Oct 3 12:28:25.509954 done Oct 3 12:28:25.509992 Bytes transferred = 65 (41 hex) Oct 3 12:28:25.521733 Config file found Oct 3 12:28:25.521787 Ignoring unknown command: serial Oct 3 12:28:25.521832 1: local Oct 3 12:28:25.521871 scanning bus for devices... Oct 3 12:28:25.521913 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 12:28:25.557748 Type: Hard Disk Oct 3 12:28:25.557804 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 12:28:25.557858 Found 1 device(s). Oct 3 12:28:25.569732 Oct 3 12:28:25.569783 SCSI device 0: Oct 3 12:28:25.569825 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 12:28:25.569875 Type: Hard Disk Oct 3 12:28:25.569918 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 12:28:25.581725 ... is now current device Oct 3 12:28:25.581781 Scanning scsi 0... Oct 3 12:28:25.581823 Found U-Boot script /boot.scr Oct 3 12:28:25.761693 1760 bytes read in 44 ms (39.1 KiB/s) Oct 3 12:28:25.809723 ## Executing script at 50000000 Oct 3 12:28:25.809779 Loading dtbs/6.12.0-rc1+/exynos5250-arndale.dtb Oct 3 12:28:25.821683 46641 bytes read in 997 ms (44.9 KiB/s) Oct 3 12:28:26.793743 1015824 bytes read in 118 ms (8.2 MiB/s) Oct 3 12:28:26.925736 Loaded xen-4.20-unstable to 0x41000000 (f8010) Oct 3 12:28:26.937775 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan Oct 3 12:28:26.949716 10912256 bytes read in 423 ms (24.6 MiB/s) Oct 3 12:28:27.369735 Loaded vmlinuz-6.12.0-rc1+ to 0x42000000 (a68200) Oct 3 12:28:27.381764 command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 12:28:27.393722 12163716 bytes read in 586 ms (19.8 MiB/s) Oct 3 12:28:27.981767 Loaded initrd.img-6.12.0-rc1+ to 0x43300000 (b99a84) Oct 3 12:28:27.981829 chosen { Oct 3 12:28:27.993764 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan"; Oct 3 12:28:28.005727 #size-cells = <0x00000001>; Oct 3 12:28:28.005727 #address-cells = <0x00000001>; Oct 3 12:28:28.005727 stdout-path = "serial2:115200n8"; Oct 3 12:28:28.005727 module@1 { Oct 3 12:28:28.005727 reg = <0x43300000 0x00b99a84>; Oct 3 12:28:28.017785 compatible = "xen,linux-initrd", "xen,multiboot-module"; Oct 3 12:28:28.017853 }; Oct 3 12:28:28.017892 module@0 { Oct 3 12:28:28.017932 bootargs = "ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Oct 3 12:28:28.029807 reg = <0x42000000 0x00a68200>; Oct 3 12:28:28.041729 compatible = "xen,linux-zimage", "xen,multiboot-module"; Oct 3 12:28:28.041791 }; Oct 3 12:28:28.041865 }; Oct 3 12:28:28.041906 Booting 0x41000000 - 0x43000000 Oct 3 12:28:28.041948 Kernel image @ 0x41000000 [ 0x000000 - 0x135000 ] Oct 3 12:28:28.053774 ## Flattened Device Tree blob at 43000000 Oct 3 12:28:28.053833 Booting using the fdt blob at 0x43000000 Oct 3 12:28:28.053879 reserving fdt memory region: addr=43000000 size=c000 Oct 3 12:28:28.065760 Loading Device Tree to 4fff1000, end 4fffffff ... OK Oct 3 12:28:28.065821 Oct 3 12:28:28.077737 Starting kernel ...(fake run for tracing) Oct 3 12:28:28.077798 Oct 3 12:28:28.077837 Oct 3 12:28:28.077875 Starting kernel ... Oct 3 12:28:28.077915 Oct 3 12:28:28.077952 __ __ _ _ ____ ___ _ _ _ Oct 3 12:28:28.137755 \ \/ /___ _ __ | || | |___ \ / _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Oct 3 12:28:28.137820 \ // _ \ '_ \ | || |_ __) | | | |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Oct 3 12:28:28.149778 / \ __/ | | | |__ _| / __/| |_| |__| |_| | | | \__ \ || (_| | |_) | | __/ Oct 3 12:28:28.149841 /_/\_\___|_| |_| |_|(_)_____|\___/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Oct 3 12:28:28.161794 Oct 3 12:28:28.161845 (XEN) Xen version 4.20-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Thu Oct 3 10:39:40 UTC 2024 Oct 3 12:28:28.173769 (XEN) Latest ChangeSet: Wed Oct 2 08:59:03 2024 +0200 git:b102c9f1ce-dirty Oct 3 12:28:28.173834 (XEN) build-id: a7636014d8eed2b092ba500c116331cd73847646 Oct 3 12:28:28.185782 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Oct 3 12:28:28.185847 (XEN) 32-bit Execution: Oct 3 12:28:28.197771 (XEN) Processor Features: 00001031:00011011 Oct 3 12:28:28.197831 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Oct 3 12:28:28.197881 (XEN) Extensions: GenericTimer Security Oct 3 12:28:28.209784 (XEN) Debug Features: 02010555 Oct 3 12:28:28.209842 (XEN) Auxiliary Features: 00000000 Oct 3 12:28:28.209887 (XEN) Memory Model Features: 10201105 20000000 Oct 3 12:28:28.221780 (XEN) 01240000 02102211 Oct 3 12:28:28.221838 (XEN) ISA Features: 02101110 13112111 21232041 Oct 3 12:28:28.221886 (XEN) 11112131 10011142 00000000 Oct 3 12:28:28.233779 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Oct 3 12:28:28.245764 (XEN) Set SYSRAM to 0000000041000070 (00200070) Oct 3 12:28:28.245824 (XEN) SMP: Allowing 2 CPUs Oct 3 12:28:28.245867 (XEN) enabled workaround for: ARM erratum 766422 Oct 3 12:28:28.245914 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Oct 3 12:28:28.257753 (XEN) GICv2 initialization: Oct 3 12:28:28.257810 (XEN) gic_dist_addr=0000000010481000 Oct 3 12:28:28.257856 (XEN) gic_cpu_addr=0000000010482000 Oct 3 12:28:28.269769 (XEN) gic_hyp_addr=0000000010484000 Oct 3 12:28:28.269827 (XEN) gic_vcpu_addr=0000000010486000 Oct 3 12:28:28.269872 (XEN) gic_maintenance_irq=25 Oct 3 12:28:28.281770 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Oct 3 12:28:28.281831 (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2) Oct 3 12:28:28.293759 (XEN) Initializing Credit2 scheduler Oct 3 12:28:28.293817 (XEN) load_precision_shift: 18 Oct 3 12:28:28.293862 (XEN) load_window_shift: 30 Oct 3 12:28:28.293904 (XEN) underload_balance_tolerance: 0 Oct 3 12:28:28.305772 (XEN) overload_balance_tolerance: -3 Oct 3 12:28:28.305830 (XEN) runqueues arrangement: socket Oct 3 12:28:28.305875 (XEN) cap enforcement granularity: 10ms Oct 3 12:28:28.305919 (XEN) load tracking window length 1073741824 ns Oct 3 12:28:28.317761 (XEN) Allocated console ring of 16 KiB. Oct 3 12:28:28.317819 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Oct 3 12:28:28.329742 (XEN) CPU0: Guest atomics will try 1 times before pausing the domain Oct 3 12:28:28.329805 (XEN) Bringing up CPU1 Oct 3 12:28:28.329867 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Oct 3 12:28:28.341772 (XEN) Brought up 2 CPUs Oct 3 12:28:28.341827 (XEN) CPU 1 booted. Oct 3 12:28:28.341870 (XEN) I/O virtualisation disabled Oct 3 12:28:28.341913 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Oct 3 12:28:28.353782 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Oct 3 12:28:28.353844 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Oct 3 12:28:28.365781 (XEN) Initializing Credit2 scheduler Oct 3 12:28:28.365839 (XEN) load_precision_shift: 18 Oct 3 12:28:28.365883 (XEN) load_window_shift: 30 Oct 3 12:28:28.365924 (XEN) underload_balance_tolerance: 0 Oct 3 12:28:28.377783 (XEN) overload_balance_tolerance: -3 Oct 3 12:28:28.377841 (XEN) runqueues arrangement: socket Oct 3 12:28:28.377887 (XEN) cap enforcement granularity: 10ms Oct 3 12:28:28.389763 (XEN) load tracking window length 1073741824 ns Oct 3 12:28:28.389825 (XEN) Adding cpu 0 to runqueue 0 Oct 3 12:28:28.389869 (XEN) First cpu on runqueue, activating Oct 3 12:28:28.389913 (XEN) Adding cpu 1 to runqueue 0 Oct 3 12:28:28.401715 (XEN) alternatives: Patching with alt table 002c31f0 -> 002c32c8 Oct 3 12:28:28.401778 (XEN) CPU0 will execute ICIALLU on guest exit Oct 3 12:28:28.413768 (XEN) CPU1 will execute ICIALLU on guest exit Oct 3 12:28:28.413829 (XEN) *** LOADING DOMAIN 0 *** Oct 3 12:28:28.413874 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Oct 3 12:28:28.425758 (XEN) Loading ramdisk from boot module @ 0000000043300000 Oct 3 12:28:28.425821 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Oct 3 12:28:28.425874 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Oct 3 12:28:28.989750 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Oct 3 12:28:28.989811 (XEN) Allocating PPI 16 for event channel interrupt Oct 3 12:28:29.025751 (XEN) d0: extended regions not supported for 32-bit guests Oct 3 12:28:29.025813 (XEN) Loading zImage from 0000000042000000 to 0000000067400000-0000000067e68200 Oct 3 12:28:29.037718 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d99a84 Oct 3 12:28:29.133748 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b495 Oct 3 12:28:29.229810 (XEN) Initial low memory virq threshold set at 0x4000 pages. Oct 3 12:28:29.229872 (XEN) Scrubbing Free RAM in background Oct 3 12:28:29.241827 (XEN) Std. Loglevel: All Oct 3 12:28:29.241882 (XEN) Guest Loglevel: All Oct 3 12:28:29.241926 (XEN) *************************************************** Oct 3 12:28:29.253754 (XEN) WARNING: SILO mode is not enabled. Oct 3 12:28:29.253812 (XEN) It has implications on the security of the system, Oct 3 12:28:29.253861 (XEN) unless the communications have been forbidden between Oct 3 12:28:29.265791 (XEN) untrusted domains. Oct 3 12:28:29.265848 (XEN) *************************************************** Oct 3 12:28:29.265894 (XEN) 3... 2... 1... Oct 3 12:28:32.265671 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 12:28:32.277635 (XEN) Freed 384kB init memory. Oct 3 12:28:32.277666 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 12:28:33.417770 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Oct 3 12:28:33.429733 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Oct 3 12:28:33.441785 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Oct 3 12:28:33.441847 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Oct 3 12:28:33.453767 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 12:28:33.453829 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 12:28:33.501770 [ 0.000000] Linux version 6.12.0-rc1+ (osstest@himrod2) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Thu Oct 3 08:41:23 UTC 2024 Oct 3 12:28:33.513733 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 12:28:33.525806 [ 0.000000] CPU: div instructions available: patching division code Oct 3 12:28:33.525876 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 12:28:33.537775 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 12:28:33.537845 [ 0.000000] Memory policy: Data cache writealloc Oct 3 12:28:33.549733 [ 0.000000] Xen 4.20 support found Oct 3 12:28:33.549790 [ 0.000000] efi: UEFI not found. Oct 3 12:28:33.549835 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 on node -1 Oct 3 12:28:33.561774 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 12:28:33.561832 [ 0.000000] Zone ranges: Oct 3 12:28:33.561876 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Oct 3 12:28:33.573779 [ 0.000000] Normal empty Oct 3 12:28:33.573836 [ 0.000000] HighMem empty Oct 3 12:28:33.573880 [ 0.000000] Movable zone start for each node Oct 3 12:28:33.585788 [ 0.000000] Early memory node ranges Oct 3 12:28:33.585846 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Oct 3 12:28:33.597771 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Oct 3 12:28:33.597835 [ 0.000000] psci: probing for conduit method from DT. Oct 3 12:28:33.609769 [ 0.000000] psci: PSCIv1.1 detected in firmware. Oct 3 12:28:33.609830 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Oct 3 12:28:33.609879 [ 0.000000] psci: Trusted OS migration not required Oct 3 12:28:33.621785 [ 0.000000] psci: SMC Calling Convention v1.2 Oct 3 12:28:33.621845 [ 0.000000] percpu: Embedded 18 pages/cpu s41868 r8192 d23668 u73728 Oct 3 12:28:33.633756 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 12:28:33.645805 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 12:28:33.657784 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Oct 3 12:28:33.669773 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 131072 Oct 3 12:28:33.669839 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Oct 3 12:28:33.681773 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 12:28:33.681838 [ 0.000000] trace event string verifier disabled Oct 3 12:28:33.693779 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 12:28:33.693841 [ 0.000000] rcu: RCU event tracing is enabled. Oct 3 12:28:33.693888 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Oct 3 12:28:33.705808 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Oct 3 12:28:33.717787 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 12:28:33.717851 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 12:28:33.729757 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 12:28:33.729821 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 12:28:33.741774 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Oct 3 12:28:33.741837 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 12:28:33.753747 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 12:28:33.765730 [ 0.000012] Switching to timer-based delay loop, resolution 41ns Oct 3 12:28:33.765790 [ 0.000503] Console: colour dummy device 80x30 Oct 3 12:28:33.777729 [ 0.000521] printk: legacy console [hvc0] enabled Oct 3 12:28:33.777782 [ 0.284246] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Oct 3 12:28:33.789743 [ 0.294639] CPU: Testing write buffer coherency: ok Oct 3 12:28:33.789798 [ 0.299582] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 12:28:33.801756 [ 0.309135] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 12:28:33.813761 [ 0.315547] pid_max: default: 32768 minimum: 301 Oct 3 12:28:33.813822 [ 0.320342] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 12:28:33.825758 [ 0.327615] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 12:28:33.825826 [ 0.336035] /cpus/cpu@0 missing clock-frequency property Oct 3 12:28:33.837727 [ 0.340819] /cpus/cpu@1 missing clock-frequency property Oct 3 12:28:33.837782 [ 0.346214] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 12:28:33.849696 [ 0.353006] xen:grant_table: Grant tables using version 1 layout Oct 3 12:28:33.849751 [ 0.358072] Grant table initialized Oct 3 12:28:33.861711 [ 0.361612] xen:events: Using FIFO-based ABI Oct 3 12:28:33.861764 [ 0.365921] Xen: initializing cpu0 Oct 3 12:28:33.861808 [ 0.369442] Setting up static identity map for 0x60300000 - 0x603000ac Oct 3 12:28:33.873720 [ 0.377230] rcu: Hierarchical SRCU implementation. Oct 3 12:28:33.873774 [ 0.380839] rcu: Max phase no-delay instances is 1000. Oct 3 12:28:33.885749 [ 0.386355] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level Oct 3 12:28:33.885819 [ 0.396847] EFI services will not be available. Oct 3 12:28:33.897749 [ 0.400145] smp: Bringing up secondary CPUs ... Oct 3 12:28:33.897810 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 12:28:33.969781 [ 0.475204] Xen: initializing cpu1 Oct 3 12:28:33.969839 [ 0.475369] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 12:28:33.981783 [ 0.475393] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 12:28:33.993783 [ 0.494355] smp: Brought up 1 node, 2 CPUs Oct 3 12:28:33.993843 [ 0.498019] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 12:28:33.993895 [ 0.504307] CPU: All CPU(s) started in SVC mode. Oct 3 12:28:34.005776 [ 0.509637] Memory: 412732K/524288K available (15360K kernel code, 2279K rwdata, 6144K rodata, 2048K init, 440K bss, 44180K reserved, 65536K cma-reserved, 0K highmem) Oct 3 12:28:34.017753 [ 0.524512] devtmpfs: initialized Oct 3 12:28:34.017810 [ 0.537614] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 12:28:34.041750 [ 0.544141] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Oct 3 12:28:34.053778 [ 0.553838] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 12:28:34.053844 [ 0.561701] pinctrl core: initialized pinctrl subsystem Oct 3 12:28:34.065716 [ 0.568348] DMI not present or invalid. Oct 3 12:28:34.065716 [ 0.571870] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 12:28:34.065716 [ 0.578507] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 12:28:34.077776 [ 0.587846] thermal_sys: Registered thermal governor 'step_wise' Oct 3 12:28:34.089761 [ 0.588004] software IO TLB: area num 2. Oct 3 12:28:34.089820 [ 0.596675] software IO TLB: only able to allocate 8 MB Oct 3 12:28:34.101745 [ 0.603727] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Oct 3 12:28:34.101810 [ 0.608921] No ATAGs? Oct 3 12:28:34.101853 [ 0.611240] hw-breakpoint: Failed to enable monitor mode on CPU 0. Oct 3 12:28:34.113722 [ 0.619812] Serial: AMBA PL011 UART driver Oct 3 12:28:34.113782 [ 0.671498] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 65 Oct 3 12:28:34.173712 [ 0.700031] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 12:28:34.197767 [ 0.726322] xen:balloon: Initialising balloon driver Oct 3 12:28:34.221780 [ 0.732800] iommu: Default domain type: Translated Oct 3 12:28:34.233771 [ 0.736215] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 12:28:34.233835 [ 0.743781] SCSI subsystem initialized Oct 3 12:28:34.245774 [ 0.746671] usbcore: registered new interface driver usbfs Oct 3 12:28:34.245836 [ 0.751891] usbcore: registered new interface driver hub Oct 3 12:28:34.245884 [ 0.757271] usbcore: registered new device driver usb Oct 3 12:28:34.257778 [ 0.763871] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 12:28:34.257838 [ 0.767486] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 12:28:34.269767 [ 0.773675] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 12:28:34.269828 [ 0.778810] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 12:28:34.281775 [ 0.783705] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 12:28:34.281837 [ 0.789748] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 12:28:34.293756 [ 0.795513] pps_core: LinuxPPS API ver. 1 registered Oct 3 12:28:34.293818 [ 0.799937] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 12:28:34.305783 [ 0.809134] PTP clock support registered Oct 3 12:28:34.305841 [ 0.813313] EDAC MC: Ver: 3.0.0 Oct 3 12:28:34.305886 [ 0.816690] scmi_core: SCMI protocol bus registered Oct 3 12:28:34.317736 [ 0.830190] vgaarb: loaded Oct 3 12:28:34.329742 [ 0.836980] clocksource: Switched to clocksource arch_sys_counter Oct 3 12:28:34.341689 [ 0.852174] NET: Registered PF_INET protocol family Oct 3 12:28:34.353783 [ 0.855820] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Oct 3 12:28:34.353851 [ 0.863711] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 12:28:34.365766 [ 0.871429] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 12:28:34.377782 [ 0.879215] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Oct 3 12:28:34.377850 [ 0.887058] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Oct 3 12:28:34.389760 [ 0.894329] TCP: Hash tables configured (established 4096 bind 4096) Oct 3 12:28:34.389823 [ 0.900714] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 12:28:34.401770 [ 0.907267] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 12:28:34.413720 [ 0.914367] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 12:28:34.413784 [ 0.927147] RPC: Registered named UNIX socket transport module. Oct 3 12:28:34.425789 [ 0.931710] RPC: Registered udp transport module. Oct 3 12:28:34.425850 [ 0.936471] RPC: Registered tcp transport module. Oct 3 12:28:34.437797 [ 0.941256] RPC: Registered tcp-with-tls transport module. Oct 3 12:28:34.437859 [ 0.946800] RPC: Registered tcp NFSv4.1 backchannel transport module. Oct 3 12:28:34.449777 [ 0.953334] PCI: CLS 0 bytes, default 64 Oct 3 12:28:34.449836 [ 0.958426] Initialise system trusted keyrings Oct 3 12:28:34.461773 [ 0.962119] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Oct 3 12:28:34.461838 [ 0.968593] squashfs: version 4.0 (2009/01/31) Phillip Lougher Oct 3 12:28:34.473730 [ 0.974527] Trying to unpack rootfs image as initramfs... Oct 3 12:28:34.473792 [ 0.988932] NFS: Registering the id_resolver key type Oct 3 12:28:34.485768 [ 0.992657] Key type id_resolver registered Oct 3 12:28:34.485827 [ 0.996869] Key type id_legacy registered Oct 3 12:28:34.497775 [ 1.001017] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Oct 3 12:28:34.497840 [ 1.007749] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Oct 3 12:28:34.509720 [ 1.047381] Key type asymmetric registered Oct 3 12:28:34.545777 [ 1.050113] Asymmetric key parser 'x509' registered Oct 3 12:28:34.545838 [ 1.055116] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) Oct 3 12:28:34.557814 [ 1.062564] io scheduler mq-deadline registered Oct 3 12:28:34.557874 [ 1.067151] io scheduler kyber registered Oct 3 12:28:34.569701 [ 1.071239] io scheduler bfq registered Oct 3 12:28:34.569701 [ 1.157842] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 12:28:34.653735 [ 1.221673] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 12:28:34.725797 [ 1.227904] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 12:28:34.725870 [ 1.260404] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 12:28:34.761768 [ 1.266633] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 12:28:34.773706 [ 1.298989] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 12:28:34.797756 [ 1.305206] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 12:28:34.809720 [ 1.335018] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 12:28:34.833765 [ 1.341312] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 12:28:34.845735 [ 1.354048] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 12:28:34.857712 [ 1.419293] xen:xen_evtchn: Event-channel device installed Oct 3 12:28:34.917715 [ 1.527754] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 12:28:35.025743 [ 1.551857] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 12:28:35.049782 [ 1.567489] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 12:28:35.073649 [ 1.588960] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 12:28:35.085747 [ 1.608241] SuperH (H)SCI(F) driver initialized Oct 3 12:28:35.109744 [ 1.611850] STMicroelectronics ASC driver initialized Oct 3 12:28:35.109805 [ 1.616698] STM32 USART driver initialized Oct 3 12:28:35.109852 [ 1.637486] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 12:28:35.133727 [ 1.650121] random: crng init done Oct 3 12:28:35.145716 [ 1.669719] brd: module loaded Oct 3 12:28:35.169697 [ 1.681367] loop: module loaded Oct 3 12:28:35.181719 [ 1.700973] Freeing initrd memory: 11880K Oct 3 12:28:35.193706 [ 1.771927] Invalid max_queues (4), will use default max: 2. Oct 3 12:28:35.265711 [ 1.790974] tun: Universal TUN/TAP device driver, 1.6 Oct 3 12:28:35.289757 [ 1.794840] CAN device driver interface Oct 3 12:28:35.289815 [ 1.799989] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Oct 3 12:28:35.301759 [ 1.811272] xen_netfront: Initialising Xen virtual ethernet driver Oct 3 12:28:35.313737 [ 1.816137] pegasus: Pegasus/Pegasus II USB Ethernet driver Oct 3 12:28:35.313799 [ 1.821796] usbcore: registered new interface driver pegasus Oct 3 12:28:35.325741 [ 1.827493] usbcore: registered new interface driver asix Oct 3 12:28:35.325802 [ 1.832952] usbcore: registered new interface driver ax88179_178a Oct 3 12:28:35.337745 [ 1.839156] usbcore: registered new interface driver cdc_ether Oct 3 12:28:35.337808 [ 1.845007] usbcore: registered new interface driver smsc75xx Oct 3 12:28:35.349745 [ 1.850859] usbcore: registered new interface driver smsc95xx Oct 3 12:28:35.349807 [ 1.856642] usbcore: registered new interface driver net1080 Oct 3 12:28:35.361739 [ 1.862389] usbcore: registered new interface driver cdc_subset Oct 3 12:28:35.361803 [ 1.868398] usbcore: registered new interface driver zaurus Oct 3 12:28:35.373724 [ 1.874000] usbcore: registered new interface driver cdc_ncm Oct 3 12:28:35.373788 [ 1.883552] usbcore: registered new interface driver usb-storage Oct 3 12:28:35.385726 [ 1.894317] i2c_dev: i2c /dev entries driver Oct 3 12:28:35.385786 [ 1.912851] device-mapper: uevent: version 1.0.3 Oct 3 12:28:35.409743 [ 1.916267] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev Oct 3 12:28:35.421753 [ 1.925904] cpu cpu0: OPP table can't be empty Oct 3 12:28:35.421812 [ 1.930664] failed to register cpuidle driver Oct 3 12:28:35.433737 [ 1.933980] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Oct 3 12:28:35.433802 [ 1.942387] sdhci: Secure Digital Host Controller Interface driver Oct 3 12:28:35.445722 [ 1.947373] sdhci: Copyright(c) Pierre Ossman Oct 3 12:28:35.445782 [ 1.955412] sdhci-pltfm: SDHCI platform and OF driver helper Oct 3 12:28:35.457729 [ 1.963567] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Oct 3 12:28:35.457794 [ 1.969632] usbcore: registered new interface driver usbhid Oct 3 12:28:35.469734 [ 1.974271] usbhid: USB HID core driver Oct 3 12:28:35.469793 [ 1.985562] NET: Registered PF_INET6 protocol family Oct 3 12:28:35.481740 [ 1.990149] Segment Routing with IPv6 Oct 3 12:28:35.481798 [ 1.992917] In-situ OAM (IOAM) with IPv6 Oct 3 12:28:35.493739 [ 1.996991] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Oct 3 12:28:35.493801 [ 2.003339] NET: Registered PF_PACKET protocol family Oct 3 12:28:35.505738 [ 2.008031] can: controller area network core Oct 3 12:28:35.505798 [ 2.012453] NET: Registered PF_CAN protocol family Oct 3 12:28:35.505847 [ 2.017307] can: raw protocol Oct 3 12:28:35.517741 [ 2.020322] can: broadcast manager protocol Oct 3 12:28:35.517801 [ 2.024578] can: netlink gateway - max_hops=1 Oct 3 12:28:35.517848 [ 2.029328] Key type dns_resolver registered Oct 3 12:28:35.529755 [ 2.034017] ThumbEE CPU extension supported. Oct 3 12:28:35.529815 [ 2.037737] Registering SWP/SWPB emulation handler Oct 3 12:28:35.541687 [ 2.052230] Loading compiled-in X.509 certificates Oct 3 12:28:35.553676 [ 2.092730] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 12:28:35.589786 [ 2.096333] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 12:28:35.601744 [ 2.103430] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 12:28:35.601817 [ 2.111169] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 12:28:35.613724 [ 2.152794] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 12:28:35.649723 [ 2.161659] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T12:28:36 UTC (1727958516) Oct 3 12:28:35.661763 [ 2.172741] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 12:28:35.673714 [ 2.177461] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 12:28:35.673775 [ 2.181719] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 12:28:35.685743 [ 2.188506] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 12:28:35.685805 [ 2.194336] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 12:28:35.697733 [ 2.200600] clk: Not disabling unused clocks Oct 3 12:28:35.697794 [ 2.204025] PM: genpd: Disabling unused power domains Oct 3 12:28:35.697842 [ 2.213018] Freeing unused kernel image (initmem) memory: 2048K Oct 3 12:28:35.709742 [ 2.219392] Run /init as init process Oct 3 12:28:35.721573 Loading, please wait... Oct 3 12:28:35.745675 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 12:28:35.817670 [ 3.455977] i2c-gpio i2c-10: using lines 552 (SDA) and 553 (SCL) Oct 3 12:28:36.949764 [ 3.606396] Synopsys Designware Multimedia Card Interface Driver Oct 3 12:28:37.105729 [ 3.655374] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 12:28:37.153744 [ 3.662628] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 12:28:37.165747 [ 3.667753] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 12:28:37.165834 [ 3.673266] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 125,32 bit host data width,128 deep fifo Oct 3 12:28:37.177768 [ 3.683231] mmc_host mmc0: card is polling. Oct 3 12:28:37.177827 [ 3.687973] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 12:28:37.189733 [ 3.698125] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 12:28:37.201738 [ 3.703638] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 12:28:37.201800 [ 3.711789] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo Oct 3 12:28:37.213775 [ 3.721060] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 12:28:37.225759 [ 3.724926] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 12:28:37.225826 [ 3.745918] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 12:28:37.249738 [ 3.762210] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 12:28:37.261714 [ 3.790258] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 12:28:37.285747 [ 3.805304] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 12:28:37.297706 [ 3.814626] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 12:28:37.309721 [ 3.820373] ahci-dwc 122f0000.sata: AHCI vers 0001.0300, 32 command slots, 6 Gbps, platform mode Oct 3 12:28:37.321774 [ 3.829188] ahci-dwc 122f0000.sata: 1/1 ports implemented (port mask 0x1) Oct 3 12:28:37.333753 [ 3.836020] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 12:28:37.333825 [ 3.882888] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 12:28:37.381739 [ 3.913684] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Oct 3 12:28:37.417739 [ 3.914369] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 12:28:37.417810 [ 3.926637] s3c-rtc 101e0000.rtc: registered as rtc1 Oct 3 12:28:37.429753 [ 3.933263] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 12:28:37.429830 [ 3.941568] scsi host0: ahci-dwc Oct 3 12:28:37.441748 [ 3.944419] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 127 lpm-pol 0 Oct 3 12:28:37.441819 [ 3.955592] phy phy-12130000.phy.7: phy_power_on was called before phy_init Oct 3 12:28:37.453758 [ 3.961215] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 12:28:37.465734 [ 3.966787] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Oct 3 12:28:37.465804 [ 3.975274] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 12:28:37.477763 [ 3.986458] mmc0: new DDR MMC card at address 0001 Oct 3 12:28:37.489724 [ 3.990624] exynos-ehci 12110000.usb: irq 129, io mem 0x12110000 Oct 3 12:28:37.489794 [ 3.998543] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Oct 3 12:28:37.501718 [ 4.005102] mmcblk0: p1 p2 p3 p4 Oct 3 12:28:37.501777 [ 4.007306] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 12:28:37.501829 [ 4.015114] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Oct 3 12:28:37.513745 [ 4.018807] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 12:28:37.525731 [ 4.032068] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Oct 3 12:28:37.525791 [ 4.038820] hub 1-0:1.0: USB hub found Oct 3 12:28:37.537715 [ 4.041260] hub 1-0:1.0: 3 ports detected Oct 3 12:28:37.537773 [ 4.056477] mmc1: new high speed SDHC card at address aaaa Oct 3 12:28:37.549705 [ 4.062483] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Oct 3 12:28:37.561726 [ 4.069041] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Oct 3 12:28:37.561785 [ 4.080245] phy phy-12130000.phy.7: phy_power_on was called before phy_init Oct 3 12:28:37.585761 [ 4.085872] exynos-ohci 12120000.usb: USB Host Controller Oct 3 12:28:37.585825 [ 4.091452] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Oct 3 12:28:37.597716 [ 4.100317] exynos-ohci 12120000.usb: irq 129, io mem 0x12120000 Oct 3 12:28:37.597778 [ 4.174581] hub 2-0:1.0: USB hub found Oct 3 12:28:37.669720 [ 4.177344] hub 2-0:1.0: 3 ports detected Oct 3 12:28:37.669779 [ 4.427080] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 12:28:37.921720 [ 4.433660] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 12:28:37.933744 [ 4.439053] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 12:28:37.945756 [ 4.447328] ata1.00: configured for UDMA/133 Oct 3 12:28:37.945818 [ 4.450906] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 12:28:37.957720 [ 4.462441] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 12:28:37.957789 [ 4.468608] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 12:28:37.969862 [ 4.474744] sd 0:0:0:0: [sda] Write Protect is off Oct 3 12:28:37.969923 [ 4.478940] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 12:28:37.981840 [ 4.488156] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 12:28:37.993753 [ 4.539782] sda: sda1 sda2 < sda5 > Oct 3 12:28:38.041787 [ 4.542664] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 12:28:38.041848 [ 4.771355] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Oct 3 12:28:38.269831 [ 4.779181] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 12:28:38.281807 [ 4.783373] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 12:28:38.281876 [ 4.795397] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000808002000010 Oct 3 12:28:38.293828 [ 4.803665] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Oct 3 12:28:38.305824 [ 4.809703] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 12:28:38.305886 [ 4.815064] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 12:28:38.317842 [ 4.822812] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 12:28:38.317905 [ 4.830260] hub 3-0:1.0: USB hub found Oct 3 12:28:38.329826 [ 4.833232] hub 3-0:1.0: 1 port detected Oct 3 12:28:38.329886 [ 4.837972] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 12:28:38.341819 [ 4.846023] hub 4-0:1.0: USB hub found Oct 3 12:28:38.341877 [ 4.849254] hub 4-0:1.0: 1 port detected Oct 3 12:28:38.341922 [ 4.969750] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 12:28:38.473754 [ 5.136334] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 12:28:38.641778 [ 5.245030] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 12:28:38.749779 [ 5.353162] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 12:28:38.857772 [ 5.461309] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 12:28:38.965768 [ 5.569472] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 12:28:39.073776 [ 5.677626] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 12:28:39.181779 [ 5.785719] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 12:28:39.289784 [ 5.893843] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 12:28:39.397772 [ 6.001939] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 12:28:39.505814 [ 6.410833] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Oct 3 12:28:39.913791 [ 6.518613] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Oct 3 12:28:40.021786 [ 7.127115] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 12:28:40.621816 Begin: Loading essential drivers ... done. Oct 3 12:28:40.681750 Begin: Running /scripts/init-premount ... done. Oct 3 12:28:43.693827 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 12:28:43.705827 Begin: Running /scripts/local-premount ... done. Oct 3 12:28:43.717734 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 12:28:43.813745 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 12:28:43.897818 /dev/mapper/arndale--westfield--vg-root: clean, 46108/1220608 files, 607458/4882432 blocks Oct 3 12:28:44.101813 done. Oct 3 12:28:44.113783 [ 10.622839] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 12:28:44.125737 [ 10.979935] EXT4-fs (dm-0): mounted filesystem fd119fbd-8219-4668-8e51-77a1aec6d5f4 ro with ordered data mode. Quota mode: disabled. Oct 3 12:28:44.485795 done. Oct 3 12:28:44.485849 Begin: Running /scripts/local-bottom ... done. Oct 3 12:28:44.521776 Begin: Running /scripts/init-bottom ... done. Oct 3 12:28:44.569747 INIT: version 3.06 booting Oct 3 12:28:45.001768 INIT: No inittab.d directory found Oct 3 12:28:45.061766 Using makefile-style concurrent boot in runlevel S. Oct 3 12:28:45.349790 Starting hotplug events dispatcher: systemd-udevd. Oct 3 12:28:46.909780 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 12:28:47.341643 Synthesizing the initial hotplug events (devices)...[ 14.751212] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled,done. irq disabled Oct 3 12:28:48.253741 Oct 3 12:28:48.253794 Waiting for /dev to be fully populated...[ 14.787838] mc: Linux media interface: v0.10 Oct 3 12:28:48.289733 [ 14.791308] s5p-secss 10830000.sss: s5p-sss driver registered Oct 3 12:28:48.289796 [ 14.867766] videodev: Linux video capture interface: v2.00 Oct 3 12:28:48.361718 [ 14.993369] s5p-mfc 11000000.codec: Adding to iommu group 0 Oct 3 12:28:48.493700 [ 15.033967] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Oct 3 12:28:48.529731 [ 15.099171] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 12:28:48.601732 [ 15.112872] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 12:28:48.613747 [ 15.120577] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 12:28:48.625723 [ 15.200688] s5p-mfc 11000000.codec: decoder registered as /dev/video0 Oct 3 12:28:48.697758 [ 15.206020] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 12:28:48.709797 [ 15.221767] s5p-mfc 11000000.codec: encoder registered as /dev/video1 Oct 3 12:28:48.721698 [ 15.354445] exynos-gsc 13e00000.gsc: Adding to iommu group 1 Oct 3 12:28:48.853730 [ 15.377484] exynos-gsc 13e10000.gsc: Adding to iommu group 2 Oct 3 12:28:48.877751 [ 15.383439] exynos-gsc 13e20000.gsc: Adding to iommu group 3 Oct 3 12:28:48.877814 [ 15.389020] exynos-gsc 13e30000.gsc: Adding to iommu group 4 Oct 3 12:28:48.889716 [ 15.401292] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 12:28:48.901759 [ 15.510654] blk_print_req_error: 6 callbacks suppressed Oct 3 12:28:49.009753 [ 15.510876] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 12:28:49.021706 [ 15.547540] usb3503 usb-hub: switched to HUB mode Oct 3 12:28:49.045793 [ 15.550891] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 12:28:49.045856 [ 15.624581] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 12:28:49.129715 [ 15.733779] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 12:28:49.237710 [ 15.761871] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Oct 3 12:28:49.261715 [ 15.785354] wm8994 3-001a: Device is not a WM8994, ID is 0 Oct 3 12:28:49.285722 [ 15.797873] wm8994 3-001a: probe with driver wm8994 failed with error -22 Oct 3 12:28:49.297711 [ 15.841983] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 12:28:49.345710 [ 15.877397] usb 1-3: new high-speed USB device number 2 using exynos-ehci Oct 3 12:28:49.381626 [ 15.950170] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 12:28:49.453721 [ 16.059271] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 12:28:49.561719 [ 16.074091] hub 1-3:1.0: USB hub found Oct 3 12:28:49.573708 [ 16.081167] hub 1-3:1.0: 3 ports detected Oct 3 12:28:49.573767 [ 16.167895] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 12:28:49.669732 [ 16.240251] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 12:28:49.741753 [ 16.247967] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 12:28:49.753765 [ 16.256679] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 12:28:49.765681 [ 16.277301] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 12:28:49.777761 [ 16.277374] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 12:28:49.789802 [ 16.294387] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 12:28:49.801762 [ 16.303074] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 12:28:49.801837 [ 16.407022] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 12:28:49.909683 [ 16.550291] hub 1-3.2:1.0: USB hub found Oct 3 12:28:50.041710 [ 16.553285] hub 1-3.2:1.0: 4 ports detected Oct 3 12:28:50.053699 [ 16.622595] usbcore: registered new device driver onboard-usb-dev Oct 3 12:28:50.125684 [ 16.696787] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Oct 3 12:28:50.197717 [ 16.804561] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Oct 3 12:28:50.305740 [ 16.857052] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 12:28:50.353728 [ 16.980853] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 12:28:50.485677 [ 17.413000] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 12:28:50.917667 [ 17.628728] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 12:28:51.133748 [ 17.643223] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Oct 3 12:28:51.145810 [ 17.653114] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, f2:c6:64:54:5d:1f Oct 3 12:28:51.157728 done. Oct 3 12:28:51.650123 [ 18.573087] EXT4-fs (dm-0): re-mounted fd119fbd-8219-4668-8e51-77a1aec6d5f4 r/w. Quota mode: disabled. Oct 3 12:28:52.069757 Checking file systems.../dev/sda1: clean, 2188/61056 files, 44693/243968 blocks Oct 3 12:28:53.225644 done. Oct 3 12:28:53.249633 Cleaning up temporary files... /tmp. Oct 3 12:28:53.413635 [ 20.108598] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 12:28:53.609542 [ 20.157515] EXT4-fs (sda1): mounted filesystem f4f56999-3d52-4564-97ef-5afac0dba59a r/w with ordered data mode. Quota mode: disabled. Oct 3 12:28:53.657734 [ 20.263833] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k Oct 3 12:28:53.765703 Mounting local filesystems...done. Oct 3 12:28:54.013576 Activating swapfile swap, if any...done. Oct 3 12:28:54.013576 Cleaning up temporary files.... Oct 3 12:28:54.049457 Starting Setting kernel variables: sysctl. Oct 3 12:28:54.233698 [ 22.087289] xenbr0: port 1(eth0) entered blocking state Oct 3 12:28:55.585813 [ 22.091155] xenbr0: port 1(eth0) entered disabled state Oct 3 12:28:55.585903 [ 22.096467] asix 1-3.2.4:1.0 eth0: entered allmulticast mode Oct 3 12:28:55.597594 [ 22.102347] asix 1-3.2.4:1.0 eth0: entered promiscuous mode Oct 3 12:28:55.597594 [ 22.112975] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 12:28:55.609742 Configuring network interfaces...RTNETLINK answers: Operation not supported Oct 3 12:28:57.493821 Oct 3 12:28:57.493883 Waiting for xenbr0 to get ready (MAXWAIT is 2 seconds). Oct 3 12:28:57.505698 [ 24.337341] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 12:28:57.841785 [ 24.343421] xenbr0: port 1(eth0) entered blocking state Oct 3 12:28:57.841846 [ 24.348605] xenbr0: port 1(eth0) entered forwarding state Oct 3 12:28:57.853684 done. Oct 3 12:28:58.117705 Cleaning up temporary files.... Oct 3 12:28:58.177727 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Oct 3 12:28:58.393732 Starting nftables: none Oct 3 12:28:58.393788 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Oct 3 12:28:58.477676 failed! Oct 3 12:28:58.477725 startpar: service(s) returned failure: nftables ... failed! Oct 3 12:28:58.489662 INIT: Entering runlevel: 2 Oct 3 12:28:58.501639 Using makefile-style concurrent boot in runlevel 2. Oct 3 12:28:58.525665 Starting Apache httpd web server: apache2AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.149.64.45. Set the 'ServerName' directive globally to suppress this message Oct 3 12:28:59.233701 . Oct 3 12:29:00.313629 [ 26.889025] platform sound: deferred probe pending: arndale-audio: snd_soc_register_card() failed Oct 3 12:29:00.385688 Starting NTP server: ntpd2024-10-03T12:29:01 ntpd[1143]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 12:29:01.033715 2024-10-03T12:29:01 ntpd[1143]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 12:29:01.045645 . Oct 3 12:29:01.045687 Starting SMP IRQ Balancer: irqbalance. Oct 3 12:29:01.057654 Starting system message bus: dbus. Oct 3 12:29:01.141645 Starting OpenBSD Secure Shell server: sshd. Oct 3 12:29:01.549647 Starting /usr/local/sbin/xenstored... Oct 3 12:29:04.033810 Setting domain 0 name, domid and JSON config... Oct 3 12:29:04.045696 Done setting up Dom0 Oct 3 12:29:04.045742 Starting xenconsoled... Oct 3 12:29:04.045785 Starting QEMU as disk backend for dom0 Oct 3 12:29:04.045829 Oct 3 12:29:05.153995 Debian GNU/Linux 12 arndale-westfield hvc0 Oct 3 12:29:05.154067 Oct 3 12:29:05.165608 arndale-westfield login: [ 118.471236] EXT4-fs (dm-3): mounted filesystem c7ff0f68-f7c2-4af6-b931-7d4256c36803 r/w with ordered data mode. Quota mode: disabled. Oct 3 12:30:31.977618 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 12:30:44.221627 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 12:37:25.601755 [ 626.680397] EXT4-fs (dm-3): unmounting filesystem c7ff0f68-f7c2-4af6-b931-7d4256c36803. Oct 3 12:39:00.181037 [ 633.629365] EXT4-fs (dm-3): mounted filesystem c7ff0f68-f7c2-4af6-b931-7d4256c36803 r/w with ordered data mode. Quota mode: disabled. Oct 3 12:39:07.125655 [ 638.795843] EXT4-fs (dm-3): unmounting filesystem c7ff0f68-f7c2-4af6-b931-7d4256c36803. Oct 3 12:39:12.285852 [ 654.011873] xenbr0: port 2(vif1.0) entered blocking state Oct 3 12:39:27.501649 [ 654.015915] xenbr0: port 2(vif1.0) entered disabled state Oct 3 12:39:27.513669 [ 654.021434] vif vif-1-0 vif1.0: entered allmulticast mode Oct 3 12:39:27.513669 [ 654.027047] vif vif-1-0 vif1.0: entered promiscuous mode Oct 3 12:39:27.525589 (XEN) d1v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 12:39:28.701618 (XEN) d1v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 12:39:28.713624 [ 656.213124] xen-blkback: backend/vbd/1/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 12:39:29.713584 [ 656.278878] xen-blkback: backend/vbd/1/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 12:39:29.773630 (XEN) common/grant_table.c:1909:d1v0 Expanding d1 grant table from 1 to 2 frames Oct 3 12:39:29.893626 [ 656.539452] vif vif-1-0 vif1.0: Guest Rx ready Oct 3 12:39:30.025676 [ 656.547207] xenbr0: port 2(vif1.0) entered blocking state Oct 3 12:39:30.037714 [ 656.551250] xenbr0: port 2(vif1.0) entered forwarding state Oct 3 12:39:30.049662 (XEN) gnttab_mark_dirty not implemented yet Oct 3 12:39:30.085681 [ 704.021700] xenbr0: port 2(vif1.0) entered disabled state Oct 3 12:40:17.509836 [ 704.177539] xenbr0: port 2(vif1.0) entered disabled state Oct 3 12:40:17.665806 [ 704.181924] vif vif-1-0 vif1.0 (unregistering): left allmulticast mode Oct 3 12:40:17.677815 [ 704.188263] vif vif-1-0 vif1.0 (unregistering): left promiscuous mode Oct 3 12:40:17.677881 [ 704.194704] xenbr0: port 2(vif1.0) entered disabled state Oct 3 12:40:17.689765 [ 731.683573] xenbr0: port 2(vif2.0) entered blocking state Oct 3 12:40:45.173100 [ 731.687682] xenbr0: port 2(vif2.0) entered disabled state Oct 3 12:40:45.189315 [ 731.693164] vif vif-2-0 vif2.0: entered allmulticast mode Oct 3 12:40:45.189357 [ 731.698781] vif vif-2-0 vif2.0: entered promiscuous mode Oct 3 12:40:45.196942 (XEN) d2v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 12:40:46.348968 (XEN) d2v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 12:40:46.360992 [ 733.863016] xen-blkback: backend/vbd/2/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 12:40:47.356982 [ 733.921458] xen-blkback: backend/vbd/2/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 12:40:47.416959 (XEN) common/grant_table.c:1909:d2v0 Expanding d2 grant table from 1 to 2 frames Oct 3 12:40:47.441008 [ 734.112869] vif vif-2-0 vif2.0: Guest Rx ready Oct 3 12:40:47.609022 [ 734.116129] xenbr0: port 2(vif2.0) entered blocking state Oct 3 12:40:47.609089 [ 734.121466] xenbr0: port 2(vif2.0) entered forwarding state Oct 3 12:40:47.621011 [ 783.081320] xenbr0: port 2(vif2.0) entered disabled state Oct 3 12:41:36.573066 [ 783.267560] xenbr0: port 2(vif2.0) entered disabled state Oct 3 12:41:36.752972 [ 783.277208] vif vif-2-0 vif2.0 (unregistering): left allmulticast mode Oct 3 12:41:36.765039 [ 783.282381] vif vif-2-0 vif2.0 (unregistering): left promiscuous mode Oct 3 12:41:36.776973 [ 783.288996] xenbr0: port 2(vif2.0) entered disabled state Oct 3 12:41:36.777037 [ 810.321409] xenbr0: port 2(vif3.0) entered blocking state Oct 3 12:42:03.812931 [ 810.325449] xenbr0: port 2(vif3.0) entered disabled state Oct 3 12:42:03.812931 [ 810.330974] vif vif-3-0 vif3.0: entered allmulticast mode Oct 3 12:42:03.824841 [ 810.336546] vif vif-3-0 vif3.0: entered promiscuous mode Oct 3 12:42:03.824841 (XEN) d3v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 12:42:04.980855 (XEN) d3v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 12:42:05.004806 [ 812.499565] xen-blkback: backend/vbd/3/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 12:42:05.988836 [ 812.547617] xen-blkback: backend/vbd/3/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 12:42:06.036821 (XEN) common/grant_table.c:1909:d3v0 Expanding d3 grant table from 1 to 2 frames Oct 3 12:42:06.084787 [ 812.819911] vif vif-3-0 vif3.0: Guest Rx ready Oct 3 12:42:06.312854 [ 812.823868] xenbr0: port 2(vif3.0) entered blocking state Oct 3 12:42:06.312854 [ 812.836578] xenbr0: port 2(vif3.0) entered forwarding state Oct 3 12:42:06.324825 [ 861.908082] xenbr0: port 2(vif3.0) entered disabled state Oct 3 12:42:55.396841 [ 862.164469] xenbr0: port 2(vif3.0) entered disabled state Oct 3 12:42:55.648846 [ 862.169630] vif vif-3-0 vif3.0 (unregistering): left allmulticast mode Oct 3 12:42:55.660823 [ 862.175130] vif vif-3-0 vif3.0 (unregistering): left promiscuous mode Oct 3 12:42:55.672841 [ 862.181710] xenbr0: port 2(vif3.0) entered disabled state Oct 3 12:42:55.672841 [ 888.998901] xenbr0: port 2(vif4.0) entered blocking state Oct 3 12:43:22.489786 [ 889.002940] xenbr0: port 2(vif4.0) entered disabled state Oct 3 12:43:22.489862 [ 889.008450] vif vif-4-0 vif4.0: entered allmulticast mode Oct 3 12:43:22.501711 [ 889.014034] vif vif-4-0 vif4.0: entered promiscuous mode Oct 3 12:43:22.501774 (XEN) d4v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 12:43:23.641744 (XEN) d4v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 12:43:23.668860 [ 891.199786] xen-blkback: backend/vbd/4/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 12:43:24.692894 [ 891.249431] xen-blkback: backend/vbd/4/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 12:43:24.740037 (XEN) common/grant_table.c:1909:d4v0 Expanding d4 grant table from 1 to 2 frames Oct 3 12:43:24.788911 [ 891.450616] vif vif-4-0 vif4.0: Guest Rx ready Oct 3 12:43:24.944926 [ 891.453878] xenbr0: port 2(vif4.0) entered blocking state Oct 3 12:43:24.945121 [ 891.459238] xenbr0: port 2(vif4.0) entered forwarding state Oct 3 12:43:24.945241 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 12:44:06.873689 [ 940.844480] xenbr0: port 2(vif4.0) entered disabled state Oct 3 12:44:14.337620 [ 941.018804] xenbr0: port 2(vif4.0) entered disabled state Oct 3 12:44:14.505775 [ 941.023951] vif vif-4-0 vif4.0 (unregistering): left allmulticast mode Oct 3 12:44:14.517681 [ 941.029509] vif vif-4-0 vif4.0 (unregistering): left promiscuous mode Oct 3 12:44:14.517717 [ 941.035967] xenbr0: port 2(vif4.0) entered disabled state Oct 3 12:44:14.529754 [ 967.855121] xenbr0: port 2(vif5.0) entered blocking state Oct 3 12:44:41.337772 [ 967.859255] xenbr0: port 2(vif5.0) entered disabled state Oct 3 12:44:41.349755 [ 967.864654] vif vif-5-0 vif5.0: entered allmulticast mode Oct 3 12:44:41.349818 [ 967.870340] vif vif-5-0 vif5.0: entered promiscuous mode Oct 3 12:44:41.361697 (XEN) d5v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 12:44:42.513773 (XEN) d5v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 12:44:42.537713 [ 970.089999] xen-blkback: backend/vbd/5/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 12:44:43.581812 [ 970.150630] xen-blkback: backend/vbd/5/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 12:44:43.641755 (XEN) common/grant_table.c:1909:d5v0 Expanding d5 grant table from 1 to 2 frames Oct 3 12:44:43.737769 [ 970.468115] vif vif-5-0 vif5.0: Guest Rx ready Oct 3 12:44:43.953779 [ 970.471937] xenbr0: port 2(vif5.0) entered blocking state Oct 3 12:44:43.965760 [ 970.476666] xenbr0: port 2(vif5.0) entered forwarding state Oct 3 12:44:43.977711 [ 1019.426075] xenbr0: port 2(vif5.0) entered disabled state Oct 3 12:45:32.909853 [ 1019.630774] xenbr0: port 2(vif5.0) entered disabled state Oct 3 12:45:33.113775 [ 1019.635795] vif vif-5-0 vif5.0 (unregistering): left allmulticast mode Oct 3 12:45:33.125828 [ 1019.641487] vif vif-5-0 vif5.0 (unregistering): left promiscuous mode Oct 3 12:45:33.137767 [ 1019.647993] xenbr0: port 2(vif5.0) entered disabled state Oct 3 12:45:33.137832 [ 1046.557879] xenbr0: port 2(vif6.0) entered blocking state Oct 3 12:46:00.048781 [ 1046.561916] xenbr0: port 2(vif6.0) entered disabled state Oct 3 12:46:00.048781 [ 1046.567430] vif vif-6-0 vif6.0: entered allmulticast mode Oct 3 12:46:00.060749 [ 1046.573013] vif vif-6-0 vif6.0: entered promiscuous mode Oct 3 12:46:00.060749 (XEN) d6v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 12:46:01.221721 (XEN) d6v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 12:46:01.233700 [ 1048.797630] xen-blkback: backend/vbd/6/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 12:46:02.284769 [ 1048.923427] xen-blkback: backend/vbd/6/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 12:46:02.416869 (XEN) common/grant_table.c:1909:d6v0 Expanding d6 grant table from 1 to 2 frames Oct 3 12:46:02.512888 [ 1049.101956] vif vif-6-0 vif6.0: Guest Rx ready Oct 3 12:46:02.584878 [ 1049.108784] xenbr0: port 2(vif6.0) entered blocking state Oct 3 12:46:02.596920 [ 1049.112821] xenbr0: port 2(vif6.0) entered forwarding state Oct 3 12:46:02.596920 [ 1091.240661] xenbr0: port 2(vif6.0) entered disabled state Oct 3 12:46:44.725807 [ 1091.455833] xenbr0: port 2(vif6.0) entered disabled state Oct 3 12:46:44.941709 [ 1091.474947] vif vif-6-0 vif6.0 (unregistering): left allmulticast mode Oct 3 12:46:44.965760 [ 1091.480157] vif vif-6-0 vif6.0 (unregistering): left promiscuous mode Oct 3 12:46:44.965825 [ 1091.486640] xenbr0: port 2(vif6.0) entered disabled state Oct 3 12:46:44.977724 [ 1118.326083] xenbr0: port 2(vif7.0) entered blocking state Oct 3 12:47:11.808985 [ 1118.330184] xenbr0: port 2(vif7.0) entered disabled state Oct 3 12:47:11.820950 [ 1118.335606] vif vif-7-0 vif7.0: entered allmulticast mode Oct 3 12:47:11.821013 [ 1118.341264] vif vif-7-0 vif7.0: entered promiscuous mode Oct 3 12:47:11.832868 (XEN) d7v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 12:47:12.996866 (XEN) d7v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 12:47:13.008878 [ 1120.530164] xen-blkback: backend/vbd/7/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 12:47:14.016893 [ 1120.587962] xen-blkback: backend/vbd/7/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 12:47:14.076748 (XEN) common/grant_table.c:1909:d7v0 Expanding d7 grant table from 1 to 2 frames Oct 3 12:47:14.148908 [ 1120.780319] vif vif-7-0 vif7.0: Guest Rx ready Oct 3 12:47:14.268925 [ 1120.783747] xenbr0: port 2(vif7.0) entered blocking state Oct 3 12:47:14.268989 [ 1120.788931] xenbr0: port 2(vif7.0) entered forwarding state Oct 3 12:47:14.280710 [ 1163.199237] xenbr0: port 2(vif7.0) entered disabled state Oct 3 12:47:56.685687 [ 1163.427303] xenbr0: port 2(vif7.0) entered disabled state Oct 3 12:47:56.917641 [ 1163.437141] vif vif-7-0 vif7.0 (unregistering): left allmulticast mode Oct 3 12:47:56.929670 [ 1163.442335] vif vif-7-0 vif7.0 (unregistering): left promiscuous mode Oct 3 12:47:56.929705 [ 1163.448840] xenbr0: port 2(vif7.0) entered disabled state Oct 3 12:47:56.941598 [ 1190.277372] xenbr0: port 2(vif8.0) entered blocking state Oct 3 12:48:23.761738 [ 1190.281407] xenbr0: port 2(vif8.0) entered disabled state Oct 3 12:48:23.773683 [ 1190.286894] vif vif-8-0 vif8.0: entered allmulticast mode Oct 3 12:48:23.773718 [ 1190.292526] vif vif-8-0 vif8.0: entered promiscuous mode Oct 3 12:48:23.785630 (XEN) d8v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 12:48:24.941701 (XEN) d8v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 12:48:24.953660 [ 1192.556318] xen-blkback: backend/vbd/8/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 12:48:26.045815 [ 1192.620955] xen-blkback: backend/vbd/8/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 12:48:26.105796 (XEN) common/grant_table.c:1909:d8v0 Expanding d8 grant table from 1 to 2 frames Oct 3 12:48:26.213739 [ 1192.900563] vif vif-8-0 vif8.0: Guest Rx ready Oct 3 12:48:26.381801 [ 1192.912228] xenbr0: port 2(vif8.0) entered blocking state Oct 3 12:48:26.393666 [ 1192.916279] xenbr0: port 2(vif8.0) entered forwarding state Oct 3 12:48:26.405791 [ 1235.203575] xenbr0: port 2(vif8.0) entered disabled state Oct 3 12:49:08.693807 [ 1235.447468] xenbr0: port 2(vif8.0) entered disabled state Oct 3 12:49:08.933833 [ 1235.454564] vif vif-8-0 vif8.0 (unregistering): left allmulticast mode Oct 3 12:49:08.945830 [ 1235.459778] vif vif-8-0 vif8.0 (unregistering): left promiscuous mode Oct 3 12:49:08.945896 [ 1235.466249] xenbr0: port 2(vif8.0) entered disabled state Oct 3 12:49:08.957786 [ 1262.257546] xenbr0: port 2(vif9.0) entered blocking state Oct 3 12:49:35.741682 [ 1262.261585] xenbr0: port 2(vif9.0) entered disabled state Oct 3 12:49:35.753642 [ 1262.267115] vif vif-9-0 vif9.0: entered allmulticast mode Oct 3 12:49:35.753677 [ 1262.272699] vif vif-9-0 vif9.0: entered promiscuous mode Oct 3 12:49:35.765573 (XEN) d9v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 12:49:36.917678 (XEN) d9v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 12:49:36.941689 [ 1264.516660] xen-blkback: backend/vbd/9/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 12:49:38.009668 [ 1264.559152] xen-blkback: backend/vbd/9/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 12:49:38.045741 (XEN) common/grant_table.c:1909:d9v0 Expanding d9 grant table from 1 to 2 frames Oct 3 12:49:38.165721 [ 1264.881200] vif vif-9-0 vif9.0: Guest Rx ready Oct 3 12:49:38.369789 [ 1264.884430] xenbr0: port 2(vif9.0) entered blocking state Oct 3 12:49:38.389635 [ 1264.889776] xenbr0: port 2(vif9.0) entered forwarding state Oct 3 12:49:38.389773 [ 1307.006481] xenbr0: port 2(vif9.0) entered disabled state Oct 3 12:50:20.497588 [ 1307.261171] xenbr0: port 2(vif9.0) entered disabled state Oct 3 12:50:20.749640 [ 1307.271080] vif vif-9-0 vif9.0 (unregistering): left allmulticast mode Oct 3 12:50:20.761666 [ 1307.276262] vif vif-9-0 vif9.0 (unregistering): left promiscuous mode Oct 3 12:50:20.761666 [ 1307.282844] xenbr0: port 2(vif9.0) entered disabled state Oct 3 12:50:20.773605 [ 1334.103793] xenbr0: port 2(vif10.0) entered blocking state Oct 3 12:50:47.585796 [ 1334.107994] xenbr0: port 2(vif10.0) entered disabled state Oct 3 12:50:47.585880 [ 1334.113504] vif vif-10-0 vif10.0: entered allmulticast mode Oct 3 12:50:47.597778 [ 1334.119331] vif vif-10-0 vif10.0: entered promiscuous mode Oct 3 12:50:47.597840 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 12:50:47.741703 (XEN) d10v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 12:50:48.761745 (XEN) d10v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 12:50:48.773758 [ 1336.192635] xen-blkback: backend/vbd/10/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 12:50:49.673809 [ 1336.262009] xen-blkback: backend/vbd/10/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 12:50:49.745785 (XEN) common/grant_table.c:1909:d10v0 Expanding d10 grant table from 1 to 2 frames Oct 3 12:50:49.769727 [ 1336.426321] vif vif-10-0 vif10.0: Guest Rx ready Oct 3 12:50:49.901751 [ 1336.434034] xenbr0: port 2(vif10.0) entered blocking state Oct 3 12:50:49.913775 [ 1336.438200] xenbr0: port 2(vif10.0) entered forwarding state Oct 3 12:50:49.925722 [ 1378.776520] xenbr0: port 2(vif10.0) entered disabled state Oct 3 12:51:32.261663 [ 1378.957618] xenbr0: port 2(vif10.0) entered disabled state Oct 3 12:51:32.441685 [ 1378.967416] vif vif-10-0 vif10.0 (unregistering): left allmulticast mode Oct 3 12:51:32.453715 [ 1378.972811] vif vif-10-0 vif10.0 (unregistering): left promiscuous mode Oct 3 12:51:32.453751 [ 1378.979712] xenbr0: port 2(vif10.0) entered disabled state Oct 3 12:51:32.465661 [ 1405.803157] xenbr0: port 2(vif11.0) entered blocking state Oct 3 12:51:59.285830 [ 1405.807358] xenbr0: port 2(vif11.0) entered disabled state Oct 3 12:51:59.285876 [ 1405.812859] vif vif-11-0 vif11.0: entered allmulticast mode Oct 3 12:51:59.297780 [ 1405.818680] vif vif-11-0 vif11.0: entered promiscuous mode Oct 3 12:51:59.297834 (XEN) d11v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 12:52:00.449665 (XEN) d11v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 12:52:00.473636 [ 1407.914891] xen-blkback: backend/vbd/11/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 12:52:01.401667 [ 1407.976298] xen-blkback: backend/vbd/11/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 12:52:01.461681 (XEN) common/grant_table.c:1909:d11v0 Expanding d11 grant table from 1 to 2 frames Oct 3 12:52:01.545627 [ 1408.185617] vif vif-11-0 vif11.0: Guest Rx ready Oct 3 12:52:01.665708 [ 1408.189049] xenbr0: port 2(vif11.0) entered blocking state Oct 3 12:52:01.677667 [ 1408.194452] xenbr0: port 2(vif11.0) entered forwarding state Oct 3 12:52:01.677723 [ 1457.313648] xenbr0: port 2(vif11.0) entered disabled state Oct 3 12:52:50.797753 [ 1457.507539] xenbr0: port 2(vif11.0) entered disabled state Oct 3 12:52:50.989739 [ 1457.517433] vif vif-11-0 vif11.0 (unregistering): left allmulticast mode Oct 3 12:52:51.001801 [ 1457.522936] vif vif-11-0 vif11.0 (unregistering): left promiscuous mode Oct 3 12:52:51.001832 [ 1457.529509] xenbr0: port 2(vif11.0) entered disabled state Oct 3 12:52:51.013727 [ 1484.827812] xenbr0: port 2(vif12.0) entered blocking state Oct 3 12:53:18.305895 [ 1484.831937] xenbr0: port 2(vif12.0) entered disabled state Oct 3 12:53:18.317872 [ 1484.837567] vif vif-12-0 vif12.0: entered allmulticast mode Oct 3 12:53:18.317936 [ 1484.843319] vif vif-12-0 vif12.0: entered promiscuous mode Oct 3 12:53:18.329806 (XEN) d12v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 12:53:19.481843 (XEN) d12v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 12:53:19.505807 [ 1486.974326] xen-blkback: backend/vbd/12/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 12:53:20.457866 [ 1487.064742] xen-blkback: backend/vbd/12/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 12:53:20.553815 (XEN) common/grant_table.c:1909:d12v0 Expanding d12 grant table from 1 to 2 frames Oct 3 12:53:20.697814 [ 1487.306121] vif vif-12-0 vif12.0: Guest Rx ready Oct 3 12:53:20.781857 [ 1487.309625] xenbr0: port 2(vif12.0) entered blocking state Oct 3 12:53:20.793848 [ 1487.314951] xenbr0: port 2(vif12.0) entered forwarding state Oct 3 12:53:20.805813 [ 1534.372259] xenbr0: port 2(vif12.0) entered disabled state Oct 3 12:54:07.853835 [ 1534.507758] xenbr0: port 2(vif12.0) entered disabled state Oct 3 12:54:07.985755 [ 1534.518083] vif vif-12-0 vif12.0 (unregistering): left allmulticast mode Oct 3 12:54:07.997765 [ 1534.523449] vif vif-12-0 vif12.0 (unregistering): left promiscuous mode Oct 3 12:54:08.009789 [ 1534.530199] xenbr0: port 2(vif12.0) entered disabled state Oct 3 12:54:08.009852 Oct 3 12:54:27.610308 (XEN) *** Serial input to Xen (type 'CTRL-x' three times to switch input) Oct 3 12:54:27.629728 Oct 3 12:54:27.631093 Oct 3 12:54:28.539309 (XEN) '0' pressed -> dumping Dom0's registers Oct 3 12:54:28.561806 (XEN) *** Dumping Dom0 vcpu#0 state: *** Oct 3 12:54:28.561838 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Oct 3 12:54:28.563790 Not tainted ]---- Oct 3 12:54:28.573734 (XEN) CPU: 0 Oct 3 12:54:28.573787 (XEN) PC: c031a828 Oct 3 12:54:28.573831 (XEN) CPSR: 600f0093 MODE:32-bit Guest SVC Oct 3 12:54:28.573878 (XEN) R0: 00000005 R1: 00000000 R2: 002574d1 R3: c031a820 Oct 3 12:54:28.585688 (XEN) R4: c1b09d40 R5: c1d29660 R6: c1b04e5c R7: c1b04e9c Oct 3 12:54:28.585751 (XEN) R8: 00000000 R9: 00000000 R10:000000a9 R11:00000000 R12:c1d28a00 Oct 3 12:54:28.597734 (XEN) USR: SP: be9318e4 LR: b6a521a9 Oct 3 12:54:28.597767 (XEN) SVC: SP: c1b01f78 LR: c1185b00 SPSR:600f0013 Oct 3 12:54:28.597793 (XEN) ABT: SP: c1d3ab10 LR: c0300ec0 SPSR:600f0193 Oct 3 12:54:28.609716 (XEN) UND: SP: c1d3ab20 LR: c0300fc0 SPSR:600f0093 Oct 3 12:54:28.609803 (XEN) IRQ: SP: c1d3ab00 LR: c0300bc0 SPSR:600f0193 Oct 3 12:54:28.625770 (XEN) FIQ: SP: c1d3ab30 LR: c1d3ab30 SPSR:00000000 Oct 3 12:54:28.625831 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 12:54:28.625882 (XEN) Oct 3 12:54:28.625920 (XEN) SCTLR: 10c5387d Oct 3 12:54:28.625962 (XEN) TCR: 00000000 Oct 3 12:54:28.637740 (XEN) TTBR0: 000000006a1dc06a Oct 3 12:54:28.637799 (XEN) TTBR1: 000000006020406a Oct 3 12:54:28.637847 (XEN) IFAR: 0047fc90, IFSR: 00000007 Oct 3 12:54:28.637892 (XEN) DFAR: 0051e318, DFSR: 0000081f Oct 3 12:54:28.649727 (XEN) Oct 3 12:54:28.649774 (XEN) VTCR_EL2: 80003558 Oct 3 12:54:28.649817 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 12:54:28.649880 (XEN) Oct 3 12:54:28.649902 (XEN) SCTLR_EL2: 30cd187f Oct 3 12:54:28.661709 (XEN) HCR_EL2: 007c663f Oct 3 12:54:28.661759 (XEN) TTBR0_EL2: 000000004110e000 Oct 3 12:54:28.661803 (XEN) Oct 3 12:54:28.661842 (XEN) ESR_EL2: 07e00000 Oct 3 12:54:28.661884 (XEN) HPFAR_EL2: 00104810 Oct 3 12:54:28.661926 (XEN) HDFAR: e0807f00 Oct 3 12:54:28.673701 (XEN) HIFAR: c0dc8c74 Oct 3 12:54:28.673750 (XEN) Oct 3 12:54:28.673790 (XEN) Guest stack trace from sp=c1b01f78: Oct 3 12:54:28.673835 (XEN) Failed to convert stack to physical address Oct 3 12:54:28.685709 (XEN) *** Dumping Dom0 vcpu#1 state: *** Oct 3 12:54:28.685761 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 12:54:28.685811 (XEN) CPU: 0 Oct 3 12:54:28.697713 (XEN) PC: c031a828 Oct 3 12:54:28.697768 (XEN) CPSR: 600d0093 MODE:32-bit Guest SVC Oct 3 12:54:28.697816 (XEN) R0: 00000005 R1: 00000000 R2: 001ea6f1 R3: c031a820 Oct 3 12:54:28.697864 (XEN) R4: c2110880 R5: c1d29660 R6: c1b04e5c R7: c1b04e9c Oct 3 12:54:28.709737 (XEN) R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:c1d28a00 Oct 3 12:54:28.721741 (XEN) USR: SP: bedc1938 LR: b6b8e893 Oct 3 12:54:28.721802 (XEN) SVC: SP: e08d9fa0 LR: c1185b00 SPSR:600d0013 Oct 3 12:54:28.721849 (XEN) ABT: SP: c1d3ab50 LR: c0301040 SPSR:600b0193 Oct 3 12:54:28.733749 (XEN) UND: SP: c1d3ab60 LR: c0300fc0 SPSR:600d0093 Oct 3 12:54:28.733810 (XEN) IRQ: SP: c1d3ab40 LR: c0300bc0 SPSR:600d0193 Oct 3 12:54:28.733857 (XEN) FIQ: SP: c1d3ab70 LR: c1d3ab70 SPSR:00000000 Oct 3 12:54:28.745731 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 12:54:28.745792 (XEN) Oct 3 12:54:28.745832 (XEN) SCTLR: 10c5387d Oct 3 12:54:28.745874 (XEN) TCR: 00000000 Oct 3 12:54:28.757769 (XEN) TTBR0: 0000000066cf806a Oct 3 12:54:28.757827 (XEN) TTBR1: 000000006020406a Oct 3 12:54:28.757871 (XEN) IFAR: b6e26814, IFSR: 00000007 Oct 3 12:54:28.769725 (XEN) DFAR: b6b13fd2, DFSR: 00000017 Oct 3 12:54:28.769784 (XEN) Oct 3 12:54:28.769824 (XEN) VTCR_EL2: 80003558 Oct 3 12:54:28.769867 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 12:54:28.769910 (XEN) Oct 3 12:54:28.769949 (XEN) SCTLR_EL2: 30cd187f Oct 3 12:54:28.781741 (XEN) HCR_EL2: 007c663f Oct 3 12:54:28.781798 (XEN) TTBR0_EL2: 000000004110e000 Oct 3 12:54:28.781842 (XEN) Oct 3 12:54:28.781881 (XEN) ESR_EL2: 07e00000 Oct 3 12:54:28.781923 (XEN) HPFAR_EL2: 00104810 Oct 3 12:54:28.793695 (XEN) HDFAR: e0807f00 Oct 3 12:54:28.793751 (XEN) HIFAR: c0dc8c74 Oct 3 12:54:28.793795 (XEN) Oct 3 12:54:28.793834 (XEN) Guest stack trace from sp=e08d9fa0: Oct 3 12:54:28.793879 (XEN) Failed to convert stack to physical address Oct 3 12:54:28.805676 Oct 3 12:54:30.536891 (XEN) 'H' pressed -> dumping heap info (now = 1562445781083) Oct 3 12:54:30.557668 (XEN) heap[node=0][zone=0] Oct 3 12:54:30.558776 -> 16279 pages Oct 3 12:54:30.569662 (XEN) heap[node=0][zone=1] -> 0 pages Oct 3 12:54:30.569701 (XEN) heap[node=0][zone=2] -> 0 pages Oct 3 12:54:30.569742 (XEN) heap[node=0][zone=3] -> 0 pages Oct 3 12:54:30.569768 (XEN) heap[node=0][zone=4] -> 0 pages Oct 3 12:54:30.581665 (XEN) heap[node=0][zone=5] -> 0 pages Oct 3 12:54:30.581665 (XEN) heap[node=0][zone=6] -> 0 pages Oct 3 12:54:30.581665 (XEN) heap[node=0][zone=7] -> 0 pages Oct 3 12:54:30.593648 (XEN) heap[node=0][zone=8] -> 0 pages Oct 3 12:54:30.593682 (XEN) heap[node=0][zone=9] -> 0 pages Oct 3 12:54:30.593706 (XEN) heap[node=0][zone=10] -> 0 pages Oct 3 12:54:30.593729 (XEN) heap[node=0][zone=11] -> 0 pages Oct 3 12:54:30.605654 (XEN) heap[node=0][zone=12] -> 0 pages Oct 3 12:54:30.605686 (XEN) heap[node=0][zone=13] -> 0 pages Oct 3 12:54:30.605710 (XEN) heap[node=0][zone=14] -> 0 pages Oct 3 12:54:30.617646 (XEN) heap[node=0][zone=15] -> 0 pages Oct 3 12:54:30.617678 (XEN) heap[node=0][zone=16] -> 0 pages Oct 3 12:54:30.617703 (XEN) heap[node=0][zone=17] -> 0 pages Oct 3 12:54:30.617726 (XEN) heap[node=0][zone=18] -> 0 pages Oct 3 12:54:30.629656 (XEN) heap[node=0][zone=19] -> 130835 pages Oct 3 12:54:30.629688 (XEN) heap[node=0][zone=20] -> 241605 pages Oct 3 12:54:30.629713 (XEN) heap[node=0][zone=21] -> 0 pages Oct 3 12:54:30.641777 (XEN) heap[node=0][zone=22] -> 0 pages Oct 3 12:54:30.641835 (XEN) heap[node=0][zone=23] -> 0 pages Oct 3 12:54:30.641880 (XEN) heap[node=0][zone=24] -> 0 pages Oct 3 12:54:30.653771 (XEN) heap[node=0][zone=25] -> 0 pages Oct 3 12:54:30.653830 (XEN) heap[node=0][zone=26] -> 0 pages Oct 3 12:54:30.653875 (XEN) heap[node=0][zone=27] -> 0 pages Oct 3 12:54:30.653918 (XEN) heap[node=0][zone=28] -> 0 pages Oct 3 12:54:30.665719 Oct 3 12:54:32.557906 Oct 3 12:54:34.315016 Oct 3 12:54:34.572543 Oct 3 12:54:36.339985 Oct 3 12:54:36.576993 (XEN) Dumping timer queues: Oct 3 12:54:36.593778 (XEN) CPU00: Oct 3 12:54:36.593778 (XEN) ex= 221439us timer=43fdc968 cb=vtimer.c#virt_timer_expired(43fdc960) Oct 3 12:54:36.593778 (XEN) CPU0 Oct 3 12:54:36.596042 1: Oct 3 12:54:36.605714 (XEN) ex= 93968us timer=43fee968 cb=vtimer.c#virt_timer_expired(43fee960) Oct 3 12:54:36.605789 Oct 3 12:54:38.575939 Oct 3 12:54:40.347140 Oct 3 12:54:40.593180 (XEN) 'd' pressed -> dumping registers Oct 3 12:54:40.609816 (XEN) Oct 3 12:54:40.609871 (XEN) *** Dumping CPU0 host state: *** Oct 3 12:54:40.609918 (XEN) ----[ Xen-4.20-unstable arm32 debug=y N Oct 3 12:54:40.612215 ot tainted ]---- Oct 3 12:54:40.621715 (XEN) CPU: 0 Oct 3 12:54:40.621767 (XEN) PC: 0025f53c domain.c#idle_loop+0x130/0x1ac Oct 3 12:54:40.621817 (XEN) CPSR: 600d005a MODE:Hypervisor Oct 3 12:54:40.621863 (XEN) R0: 00000000 R1: 00000001 R2: 00000000 R3: 00000000 Oct 3 12:54:40.633687 (XEN) R4: 00000000 R5: 003000e0 R6: 00331324 R7: 00000001 Oct 3 12:54:40.633687 (XEN) R8: 00331104 R9: 00000000 R10:40e00000 R11:4003ff54 R12:fffffffc Oct 3 12:54:40.645662 (XEN) HYP: SP: 4003ff44 LR: 00225b7c Oct 3 12:54:40.645662 (XEN) Oct 3 12:54:40.645662 (XEN) VTCR_EL2: 80003558 Oct 3 12:54:40.645662 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 12:54:40.657746 (XEN) Oct 3 12:54:40.657805 (XEN) SCTLR_EL2: 30cd187f Oct 3 12:54:40.657850 (XEN) HCR_EL2: 007c663f Oct 3 12:54:40.657893 (XEN) TTBR0_EL2: 000000004110e000 Oct 3 12:54:40.657936 (XEN) Oct 3 12:54:40.657975 (XEN) ESR_EL2: 07e00000 Oct 3 12:54:40.669669 (XEN) HPFAR_EL2: 00104810 Oct 3 12:54:40.669669 (XEN) HDFAR: e0807f00 Oct 3 12:54:40.669669 (XEN) HIFAR: c0dc8c74 Oct 3 12:54:40.669669 (XEN) Oct 3 12:54:40.669669 (XEN) Xen stack trace from sp=4003ff44: Oct 3 12:54:40.681821 (XEN) 07e00000 00295014 002919bc 4003ff4c 002678fc 00000000 00000000 00000000 Oct 3 12:54:40.681891 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 12:54:40.693786 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 12:54:40.693848 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 12:54:40.705764 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 12:54:40.717699 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 12:54:40.717699 (XEN) Xen call trace: Oct 3 12:54:40.717699 (XEN) [<0025f53c>] domain.c#idle_loop+0x130/0x1ac (PC) Oct 3 12:54:40.729793 (XEN) [<00225b7c>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 12:54:40.729859 (XEN) [<002678fc>] arch_get_xen_caps+0/0x90 Oct 3 12:54:40.729905 (XEN) Oct 3 12:54:40.741783 (XEN) *** Dumping CPU1 host state: *** Oct 3 12:54:40.741842 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 12:54:40.741892 (XEN) CPU: 1 Oct 3 12:54:40.741932 (XEN) PC: 0025f53c domain.c#idle_loop+0x130/0x1ac Oct 3 12:54:40.753791 (XEN) CPSR: 6007005a MODE:Hypervisor Oct 3 12:54:40.753851 (XEN) R0: 00000000 R1: 00000001 R2: 3fd06000 R3: 00000000 Oct 3 12:54:40.765762 (XEN) R4: 00000001 R5: 003000e0 R6: 00331324 R7: 00000002 Oct 3 12:54:40.765824 (XEN) R8: 00331104 R9: 00000001 R10:40e00000 R11:4000ff54 R12:fffffffc Oct 3 12:54:40.777773 (XEN) HYP: SP: 4000ff44 LR: 00225b7c Oct 3 12:54:40.777831 (XEN) Oct 3 12:54:40.777871 (XEN) VTCR_EL2: 80003558 Oct 3 12:54:40.777914 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 12:54:40.777957 (XEN) Oct 3 12:54:40.777995 (XEN) SCTLR_EL2: 30cd187f Oct 3 12:54:40.789759 (XEN) HCR_EL2: 007c663f Oct 3 12:54:40.789815 (XEN) TTBR0_EL2: 00000000ba004000 Oct 3 12:54:40.789859 (XEN) Oct 3 12:54:40.789898 (XEN) ESR_EL2: 07e00000 Oct 3 12:54:40.789939 (XEN) HPFAR_EL2: 00104810 Oct 3 12:54:40.801791 (XEN) HDFAR: e0807f00 Oct 3 12:54:40.801848 (XEN) HIFAR: 40008000 Oct 3 12:54:40.801891 (XEN) Oct 3 12:54:40.801929 (XEN) Xen stack trace from sp=4000ff44: Oct 3 12:54:40.801973 (XEN) 07e00000 00301290 00000001 4000ff3c 002681e0 00000000 00000000 00000000 Oct 3 12:54:40.813783 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 12:54:40.825776 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 12:54:40.825839 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 12:54:40.837782 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 12:54:40.837845 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 12:54:40.849807 (XEN) Xen call trace: Oct 3 12:54:40.849864 (XEN) [<0025f53c>] domain.c#idle_loop+0x130/0x1ac (PC) Oct 3 12:54:40.849913 (XEN) [<00225b7c>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 12:54:40.861758 (XEN) [<002681e0>] start_secondary+0x204/0x20c Oct 3 12:54:40.861818 (XEN) Oct 3 12:54:40.861858 Oct 3 12:54:42.592310 (XEN) 'e' pressed -> dumping event-channel info Oct 3 12:54:42.617810 (XEN) Event channel information for domain 0: Oct 3 12:54:42.617850 (XEN) Polling vCPUs: {} Oct 3 12:54:42.617850 (XEN) port Oct 3 12:54:42.619964 [p/m/s] Oct 3 12:54:42.629727 (XEN) 1 [0/0/ - ]: s=3 n=1 x=0 d=0 p=4 Oct 3 12:54:42.629790 (XEN) 2 [0/0/ - ]: s=5 n=0 x=0 v=2 Oct 3 12:54:42.629837 (XEN) 3 [0/0/ - ]: s=5 n=1 x=0 v=3 Oct 3 12:54:42.641631 (XEN) 4 [0/0/ - ]: s=3 n=0 x=0 d=0 p=1 Oct 3 12:54:42.641631 Oct 3 12:54:44.596655 (XEN) gnttab_usage_print_all [ key 'g' pressed Oct 3 12:54:44.617838 (XEN) -------- active -------- -------- shared -------- Oct 3 12:54:44.617915 (XEN) [ref] localdo Oct 3 12:54:44.620420 m mfn pin localdom gmfn flags Oct 3 12:54:44.629725 (XEN) grant-table for remote d0 (v1) Oct 3 12:54:44.629781 (XEN) 1 frames (64 max), 4 maptrack frames (1024 max) Oct 3 12:54:44.641764 (XEN) no active grant table entries Oct 3 12:54:44.641823 (XEN) gnttab_usage_print_all ] done Oct 3 12:54:44.641869 Oct 3 12:54:46.593002 Oct 3 12:54:48.361870 Oct 3 12:54:48.612518 (XEN) Physical memory information: Oct 3 12:54:48.633799 (XEN) Xen heap: 65116kB free Oct 3 12:54:48.633858 (XEN) heap[19]: 523340kB free Oct 3 12:54:48.633902 (XEN) heap[20]: 966420kB fr Oct 3 12:54:48.636350 ee Oct 3 12:54:48.645672 (XEN) Dom heap: 1489760kB free Oct 3 12:54:48.645730 Oct 3 12:54:50.605788 Oct 3 12:54:52.372692 Oct 3 12:54:52.601564 (XEN) sched_smt_power_savings: disabled Oct 3 12:54:52.621775 (XEN) NOW=1584509989000 Oct 3 12:54:52.621843 (XEN) Online Cpus: 0-1 Oct 3 12:54:52.621887 Oct 3 12:54:52.622884 (XEN) Cpupool 0: Oct 3 12:54:52.633798 (XEN) Cpus: 0-1 Oct 3 12:54:52.633850 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Oct 3 12:54:52.633900 (XEN) Scheduler: SMP Credit Scheduler rev2 (credit2) Oct 3 12:54:52.645742 (XEN) Active queues: 1 Oct 3 12:54:52.645798 (XEN) default-weight = 256 Oct 3 12:54:52.645844 (XEN) Runqueue 0: Oct 3 12:54:52.645885 (XEN) ncpus = 2 Oct 3 12:54:52.645927 (XEN) cpus = 0-1 Oct 3 12:54:52.657739 (XEN) max_weight = 256 Oct 3 12:54:52.657797 (XEN) pick_bias = 0 Oct 3 12:54:52.657841 (XEN) instload = 0 Oct 3 12:54:52.657883 (XEN) aveload = 1471 (~0%) Oct 3 12:54:52.669749 (XEN) idlers: 2 Oct 3 12:54:52.669804 (XEN) tickled: 0 Oct 3 12:54:52.669846 (XEN) fully idle cores: 2 Oct 3 12:54:52.669889 (XEN) Domain info: Oct 3 12:54:52.669929 (XEN) Domain: 0 w 256 c 0 v 2 Oct 3 12:54:52.669972 (XEN) 1: [0.0] flags=0 cpu=1 credit=6516523 [w=256] load=1068 (~0%) Oct 3 12:54:52.681749 (XEN) 2: [0.1] flags=0 cpu=0 credit=10104292 [w=256] load=477 (~0%) Oct 3 12:54:52.681813 (XEN) Runqueue 0: Oct 3 12:54:52.693742 (XEN) CPU[00] runq=0, sibling={0}, core={0-1} Oct 3 12:54:52.693802 (XEN) CPU[01] runq=0, sibling={1}, core={0-1} Oct 3 12:54:52.693848 (XEN) RUNQ: Oct 3 12:54:52.693887 (XEN) 0: [0.0] flags=0 cpu=1 credit=6516523 [w=256] load=1047 (~0%) Oct 3 12:54:52.705748 (XEN) CPUs info: Oct 3 12:54:52.705802 (XEN) CPU[00] current=d[IDLE]v0, curr=d[IDLE]v0, prev=NULL Oct 3 12:54:52.705851 (XEN) CPU[01] current=d[IDLE]v1, curr=d[IDLE]v1, prev=NULL Oct 3 12:54:52.717718 Oct 3 12:54:54.587577 Oct 3 12:54:56.382344 Oct 3 12:54:56.628499 (XEN) Synced stime skew: max=125ns avg=125ns samples=1 current=125ns Oct 3 12:54:56.645788 (XEN) Synced cycles skew: max=1 avg=1 samples=1 current=1 Oct 3 12:54:56.645849 Oct 3 12:54:56.648022 Oct 3 12:54:58.629887 Oct 3 12:55:00.390473 Oct 3 12:55:00.636842 Oct 3 12:55:02.396766 Oct 3 12:55:02.641356 Oct 3 12:55:04.404863 Oct 3 12:55:14.621063 (XEN) 'q' pressed -> dumping domain info (now = 1606525428625) Oct 3 12:55:14.637665 (XEN) General information for domain 0: Oct 3 12:55:14.637696 (XEN) refcnt=3 dying=0 pau Oct 3 12:55:14.638909 se_count=0 Oct 3 12:55:14.649656 (XEN) nr_pages=131072 xenheap_pages=2 dirty_cpus={} max_pages=131072 Oct 3 12:55:14.649690 (XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=00000020 Oct 3 12:55:14.661673 (XEN) p2m mappings for domain 0 (vmid 1): Oct 3 12:55:14.661702 (XEN) 1G mappings: 0 (shattered 0) Oct 3 12:55:14.661726 (XEN) 2M mappings: 233 (shattered 23) Oct 3 12:55:14.673656 (XEN) 4K mappings: 6571 Oct 3 12:55:14.673684 (XEN) Rangesets belonging to domain 0: Oct 3 12:55:14.673709 (XEN) Interrupts { 32-72, 74, 77-79, 82-84, 86, 88-100, 103-104, 107-110, 114, 116-120, 123, 126-128, 138, 144, 146-147, 149-151, 156 } Oct 3 12:55:14.685720 (XEN) I/O Memory { 2020-2050, 3810-3811, 3830-3831, 3860-3861, 10000-10001, 10010-10045, 10050-10055, 10060-10061, 101b0-101b1, 101d0-101d1, 101e0-101e1, 10440-10441, 10800-10801, 10830-10831, 10850-10851, 10a60-10a61, 10d10-10d11, 11000-11010, 11200-11201, 11210-11211, 11400-11401, 11800-11805, 11c00-11c01, 11c10-11c11, 11d40-11d41, 11f20-11f21, 12000-12010, 12100-12101, 12110-12111, 12120-12121, 12130-12131, 12170-12171, 121a0-121a1, 121b0-121b1, 121d0-121d1, 12200-12201, 12210-12211, 12220-12221, 12230-12231, 12250-12251, 122f0-122f1, 12c00-12c01, 12c10-12c11, 12c30-12c31, 12c60-12c61, 12c70-12c71, 12c80-12c81, 12c90-12c91, 12ca0-12ca1, 12cb0-12cb1, 12cc0-12cc1, 12cd0-12cd1, 12ce0-12ce1, 12d10-12d11, 12d20-12d21, 12d30-12d31, 12d40-12d41, 12d60-12d61, 12d70-12d71, 12dd0-12dd1, 13260-13261, 13270-13271, 13280-13281, 13290-13291, 132a0-132a1, 132b0-132b1, 132c0-132c1, 132d0-132d1, 132e0-132e1, 132f0-132f1, 13400-13401, 13c40-13c41, 13c50-13c51, 13e00-13e01, 13e10-13e11, 13e20-13e21, 13e30-13e31, 13e80-13e81, 13e90-13e91, 13ea0-13ea1, 13eb0-13eb1, 14400-14440, 14450-14460, 14500-14510, 14530-145a0, 145b0-145b1, 14640-14641, 14650-14651 } Oct 3 12:55:14.781644 (XEN) NODE affinity for domain 0: [0] Oct 3 12:55:14.793628 (XEN) VCPU information and callbacks for domain 0: Oct 3 12:55:14.793657 (XEN) UNIT0 affinities: hard={0-1} soft={0-1} Oct 3 12:55:14.793682 (XEN) VCPU0: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 12:55:14.805626 (XEN) pause_count=0 pause_flags=1 Oct 3 12:55:14.805655 (XEN) GICH_LRs (vcpu 0) mask=0 Oct 3 12:55:14.805679 (XEN) VCPU_LR[0]=0 Oct 3 12:55:14.817692 (XEN) VCPU_LR[1]=0 Oct 3 12:55:14.817722 (XEN) VCPU_LR[2]=0 Oct 3 12:55:14.817745 (XEN) VCPU_LR[3]=0 Oct 3 12:55:14.817767 (XEN) No periodic timer Oct 3 12:55:14.817789 (XEN) UNIT1 affinities: hard={0-1} soft={0-1} Oct 3 12:55:14.829685 (XEN) VCPU1: CPU0 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 12:55:14.829720 (XEN) pause_count=0 pause_flags=1 Oct 3 12:55:14.829744 (XEN) GICH_LRs (vcpu 1) mask=0 Oct 3 12:55:14.841677 (XEN) VCPU_LR[0]=0 Oct 3 12:55:14.841708 (XEN) VCPU_LR[1]=0 Oct 3 12:55:14.841731 (XEN) VCPU_LR[2]=0 Oct 3 12:55:14.841753 (XEN) VCPU_LR[3]=0 Oct 3 12:55:14.841774 (XEN) No periodic timer Oct 3 12:55:14.853653 (XEN) Notifying guest 0:0 (virq 1, port 0) Oct 3 12:55:14.853686 (XEN) Notifying guest 0:1 (virq 1, port 0) Oct 3 12:55:14.853711 Oct 3 12:55:26.630206 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 12:55:26.645817 Oct 3 12:55:26.645873 arndale-westfield login: Oct 3 12:55:26.647148 [ 1676.638491] sd 0:0:0:0: [sda] Synchronizing SCSI cache Oct 3 12:56:30.117693 [ 1676.651199] wake enabled for irq 119 (gpx1-4) Oct 3 12:56:30.129703 [ 1676.654190] wake enabled for irq 120 (gpx1-5) Oct 3 12:56:30.129749 [ 1676.658668] wake enabled for irq 121 (gpx1-6) Oct 3 12:56:30.141690 [ 1676.663043] wake enabled for irq 122 (gpx1-7) Oct 3 12:56:30.141723 [ 1676.667486] wake enabled for irq 123 (gpx2-0) Oct 3 12:56:30.141764 [ 1676.671896] wake enabled for irq 124 (gpx2-1) Oct 3 12:56:30.153645 [ 1676.676790] reboot: Resô Oct 3 12:56:30.489664 Oct 3 12:56:30.489681 Oct 3 12:56:30.489721 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 12:56:30.501681 Oct 3 12:56:30.501710 CPU: Exynos5250@1000MHz Oct 3 12:56:30.501734 Oct 3 12:56:30.501754 Board: Arndale Oct 3 12:56:30.501776 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 12:56:30.501802 ready Oct 3 12:56:30.501823 DRAM: 2 GiB Oct 3 12:56:30.501844 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 12:56:30.525645 trace: enabled Oct 3 12:56:30.561621 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 12:56:30.921658 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 12:56:30.981676 In: serial Oct 3 12:56:30.981709 Out: serial Oct 3 12:56:30.981732 Err: serial Oct 3 12:56:30.981754 SCSI: ARNDALE SCSI INIT Oct 3 12:56:30.981777 Target spinup took 0 ms. Oct 3 12:56:30.993659 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 12:56:30.993693 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 12:56:31.005696 Net: Net Initialization Skipped Oct 3 12:56:31.005728 No ethernet found. Oct 3 12:56:31.005751 Hostname: arndale-westfield Oct 3 12:56:31.005774 Hit any key to stop autoboot: 2  1  0 Oct 3 12:56:32.937756 (Re)start USB... Oct 3 12:56:32.937830 USB0: USB EHCI 1.00 Oct 3 12:56:32.937874 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 12:56:38.541750 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 12:56:38.541824 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 12:56:38.985734 Waiting for Ethernet connection... done. Oct 3 12:56:40.821726 BOOTP broadcast 1 Oct 3 12:56:40.833670 EHCI timed out on TD - token=0x8008d80 Oct 3 12:56:45.625805 BOOTP broadcast 2 Oct 3 12:56:45.637851 DHCP client bound to address 10.149.64.45 (5006 ms) Oct 3 12:56:45.637912 Using asx0 device Oct 3 12:56:45.637955 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 12:56:45.649809 Filename 'pxelinux.0'. Oct 3 12:56:45.649859 Load address: 0x43e00000 Oct 3 12:56:45.649903 Loading: *### Oct 3 12:56:45.661776 2.4 MiB/s Oct 3 12:56:45.661831 done Oct 3 12:56:45.661870 Bytes transferred = 42430 (a5be hex) Oct 3 12:56:45.673854 missing environment variable: pxeuuid Oct 3 12:56:45.673912 Retrieving file: pxelinux.cfg/0A95402D Oct 3 12:56:45.673958 Using asx0 device Oct 3 12:56:45.673999 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 12:56:45.685879 Filename 'pxelinux.cfg/0A95402D'. Oct 3 12:56:45.685936 Load address: 0x51000000 Oct 3 12:56:45.685979 Loading: *# Oct 3 12:56:45.686019 355.5 KiB/s Oct 3 12:56:45.686058 done Oct 3 12:56:45.697922 Bytes transferred = 728 (2d8 hex) Oct 3 12:56:45.697980 Config file found Oct 3 12:56:45.698022 Ignoring unknown command: serial Oct 3 12:56:45.698066 1: ^Overwrite Oct 3 12:56:45.698106 Retrieving file: /osstest/tmp//arndale-westfield--initrd.gz Oct 3 12:56:45.709737 Using asx0 device Oct 3 12:56:45.709791 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 12:56:45.709840 Filename '/osstest/tmp//arndale-westfield--initrd.gz'. Oct 3 12:56:45.721735 Load address: 0x43300000 Oct 3 12:56:45.721791 Loading: *################################################################# Oct 3 12:56:46.045718 ################################################################# Oct 3 12:56:46.369595 ################################################################# Oct 3 12:56:46.705705 ################################################################# Oct 3 12:56:47.029703 ################################################################# Oct 3 12:56:47.353758 ################################################################# Oct 3 12:56:47.677734 ################################################################# Oct 3 12:56:48.013739 ################################################################# Oct 3 12:56:48.337741 ################################################################# Oct 3 12:56:48.661685 ################################################################# Oct 3 12:56:48.985756 ################################################################# Oct 3 12:56:49.309741 ################################################################# Oct 3 12:56:49.645801 ################################################################# Oct 3 12:56:49.969715 ################################################################# Oct 3 12:56:50.293730 ################################################################# Oct 3 12:56:50.617684 ################################################################# Oct 3 12:56:50.941973 ################################################################# Oct 3 12:56:51.265719 ################################################################# Oct 3 12:56:51.589984 ################################################################# Oct 3 12:56:51.914206 ################################################################# Oct 3 12:56:52.237683 ################################################################# Oct 3 12:56:52.573590 ################################################################# Oct 3 12:56:52.897724 ################################################################# Oct 3 12:56:53.209674 ################################################################# Oct 3 12:56:53.521787 ################################################################# Oct 3 12:56:53.845737 ################################################################# Oct 3 12:56:54.169720 ################################################################# Oct 3 12:56:54.481671 ######################################## Oct 3 12:56:54.685705 2.7 MiB/s Oct 3 12:56:54.685770 done Oct 3 12:56:54.685812 Bytes transferred = 26339181 (191e76d hex) Oct 3 12:56:54.685858 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/linux Oct 3 12:56:54.697766 Using asx0 device Oct 3 12:56:54.697821 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 12:56:54.709710 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/linux'. Oct 3 12:56:54.709745 Load address: 0x42000000 Oct 3 12:56:54.709769 Loading: *################################################################# Oct 3 12:56:55.045723 ################################################################# Oct 3 12:56:55.384930 ################################################################# Oct 3 12:56:55.709501 ################################################################# Oct 3 12:56:56.037153 ################################################################# Oct 3 12:56:56.360972 ############################################# Oct 3 12:56:56.589341 2.7 MiB/s Oct 3 12:56:56.589398 done Oct 3 12:56:56.589439 Bytes transferred = 5427712 (52d200 hex) Oct 3 12:56:56.589484 append: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=44820 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 12:56:56.637041 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb Oct 3 12:56:56.650209 Using asx0 device Oct 3 12:56:56.650265 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 12:56:56.650315 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb'. Oct 3 12:56:56.660996 Load address: 0x43000000 Oct 3 12:56:56.661051 Loading: *#### Oct 3 12:56:56.672965 2.6 MiB/s Oct 3 12:56:56.673050 done Oct 3 12:56:56.673093 Bytes transferred = 46686 (b65e hex) Oct 3 12:56:56.685038 Kernel image @ 0x42000000 [ 0x000000 - 0x52d200 ] Oct 3 12:56:56.685097 ## Flattened Device Tree blob at 43000000 Oct 3 12:56:56.685143 Booting using the fdt blob at 0x43000000 Oct 3 12:56:56.697805 Loading Ramdisk to 4e6e1000, end 4ffff76d ... OK Oct 3 12:56:57.121019 Loading Device Tree to 4e6d2000, end 4e6e065d ... OK Oct 3 12:56:57.121092 Oct 3 12:56:57.133039 Starting kernel ...(fake run for tracing) Oct 3 12:56:57.133101 Oct 3 12:56:57.133147 Oct 3 12:56:57.133669 Starting kernel ... Oct 3 12:56:57.133699 Oct 3 12:56:57.133720 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 12:57:03.252804 [ 0.000000] Linux version 6.1.0-25-armmp (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.106-3 (2024-08-26) Oct 3 12:57:03.264836 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 12:57:03.264836 [ 0.000000] CPU: div instructions available: patching division code Oct 3 12:57:03.276851 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 12:57:03.288983 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 12:57:03.288988 [ 0.000000] Memory policy: Data cache writealloc Oct 3 12:57:03.300869 [ 0.000000] efi: UEFI not found. Oct 3 12:57:03.300869 [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 Oct 3 12:57:03.300869 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 12:57:03.312889 [ 0.000000] Zone ranges: Oct 3 12:57:03.312889 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 12:57:03.312889 [ 0.000000] Normal empty Oct 3 12:57:03.324629 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 12:57:03.324709 [ 0.000000] Movable zone start for each node Oct 3 12:57:03.324757 [ 0.000000] Early memory node ranges Oct 3 12:57:03.336907 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 12:57:03.336907 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 12:57:03.348955 [ 0.000000] percpu: Embedded 18 pages/cpu s44692 r8192 d20844 u73728 Oct 3 12:57:03.349100 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 12:57:03.360866 [ 0.000000] Kernel command line: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=44820 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 12:57:03.409004 [ 0.000000] Unknown kernel command line parameters "preseed --- vga=normal auto=true hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=44820 domain=test-lab.xenproject.org", will be passed to user space. Oct 3 12:57:03.445059 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 12:57:03.445129 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 12:57:03.457104 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 12:57:03.468956 [ 0.000000] Memory: 2015968K/2097152K available (11264K kernel code, 1696K rwdata, 3724K rodata, 2048K init, 376K bss, 64800K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 12:57:03.480995 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 12:57:03.481079 [ 0.000000] ftrace: allocating 39612 entries in 117 pages Oct 3 12:57:03.493050 [ 0.000000] ftrace: allocated 117 pages with 5 groups Oct 3 12:57:03.493111 [ 0.000000] trace event string verifier disabled Oct 3 12:57:03.505058 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 12:57:03.505120 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 12:57:03.516977 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 12:57:03.517039 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 12:57:03.517087 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 12:57:03.528991 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 12:57:03.540909 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 12:57:03.540944 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 12:57:03.540970 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 12:57:03.552921 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 12:57:03.552956 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 12:57:03.565010 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 12:57:03.576915 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 12:57:03.576980 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 12:57:03.588826 [ 0.002613] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 12:57:03.600886 [ 0.002626] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 12:57:03.600886 [ 0.002641] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 12:57:03.612847 [ 0.002652] Ignoring duplicate/late registration of read_current_timer delay Oct 3 12:57:03.625073 [ 0.003011] Console: colour dummy device 80x30 Oct 3 12:57:03.625139 [ 0.003052] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 12:57:03.636813 [ 0.003065] CPU: Testing write buffer coherency: ok Oct 3 12:57:03.636813 [ 0.003109] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 12:57:03.648788 [ 0.003117] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 12:57:03.660794 [ 0.003123] pid_max: default: 32768 minimum: 301 Oct 3 12:57:03.660794 [ 0.003483] LSM: Security Framework initializing Oct 3 12:57:03.660794 [ 0.003555] landlock: Up and running. Oct 3 12:57:03.672882 [ 0.003559] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 12:57:03.672921 [ 0.003742] AppArmor: AppArmor initialized Oct 3 12:57:03.684972 [ 0.003755] TOMOYO Linux initialized Oct 3 12:57:03.684972 [ 0.003802] LSM support for eBPF active Oct 3 12:57:03.684972 [ 0.004048] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 12:57:03.696895 [ 0.004062] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 12:57:03.696895 [ 0.005499] /cpus/cpu@0 missing clock-frequency property Oct 3 12:57:03.708889 [ 0.005528] /cpus/cpu@1 missing clock-frequency property Oct 3 12:57:03.708889 [ 0.005541] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 12:57:03.720878 [ 0.006496] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 12:57:03.720878 [ 0.006502] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 12:57:03.733028 [ 0.006606] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 12:57:03.733028 [ 0.006612] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 12:57:03.744883 [ 0.006758] Setting up static identity map for 0x40300000 - 0x403000ac Oct 3 12:57:03.756839 [ 0.007919] rcu: Hierarchical SRCU implementation. Oct 3 12:57:03.756839 [ 0.007925] rcu: Max phase no-delay instances is 1000. Oct 3 12:57:03.756839 [ 0.010045] EFI services will not be available. Oct 3 12:57:03.768872 [ 0.010387] smp: Bringing up secondary CPUs ... Oct 3 12:57:03.768872 [ 0.011128] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 12:57:03.780992 [ 0.011140] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 12:57:03.781021 [ 0.011272] smp: Brought up 1 node, 2 CPUs Oct 3 12:57:03.792990 [ 0.011280] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 12:57:03.793080 [ 0.011288] CPU: All CPU(s) started in HYP mode. Oct 3 12:57:03.804932 [ 0.011292] CPU: Virtualization extensions available. Oct 3 12:57:03.804932 [ 0.011916] devtmpfs: initialized Oct 3 12:57:03.804932 [ 0.023321] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 12:57:03.817078 [ 0.023554] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 12:57:03.829053 [ 0.023579] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 12:57:03.829117 [ 0.024114] pinctrl core: initialized pinctrl subsystem Oct 3 12:57:03.841058 [ 0.024811] DMI not present or invalid. Oct 3 12:57:03.841117 [ 0.025488] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 12:57:03.853044 [ 0.030888] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 12:57:03.853109 [ 0.032437] audit: initializing netlink subsys (disabled) Oct 3 12:57:03.865043 [ 0.032637] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 Oct 3 12:57:03.865113 [ 0.033791] thermal_sys: Registered thermal governor 'fair_share' Oct 3 12:57:03.877055 [ 0.033798] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 12:57:03.877118 [ 0.033803] thermal_sys: Registered thermal governor 'step_wise' Oct 3 12:57:03.888994 [ 0.033807] thermal_sys: Registered thermal governor 'user_space' Oct 3 12:57:03.889057 [ 0.033811] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 12:57:03.901050 [ 0.034187] No ATAGs? Oct 3 12:57:03.901106 [ 0.034254] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 12:57:03.913039 [ 0.034263] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 12:57:03.913101 [ 0.035343] Serial: AMBA PL011 UART driver Oct 3 12:57:03.913148 [ 0.084762] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 12:57:03.925007 [ 0.091754] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 12:57:03.937068 [ 0.102765] iommu: Default domain type: Translated Oct 3 12:57:03.937128 [ 0.102774] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 12:57:03.949042 [ 0.103743] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 12:57:03.949106 [ 0.104283] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 12:57:03.961069 [ 0.104294] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 12:57:03.961167 [ 0.104831] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 12:57:03.973053 [ 0.104862] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 12:57:03.985035 [ 0.105044] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 12:57:03.985096 [ 0.105397] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 12:57:03.997041 [ 0.105407] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 12:57:03.997106 [ 0.105804] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 12:57:03.997155 [ 0.106094] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 12:57:04.008992 [ 0.106104] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 12:57:04.009056 [ 0.106380] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 12:57:04.021047 [ 0.106481] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 12:57:04.021128 [ 0.106490] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 12:57:04.032977 [ 0.106690] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 12:57:04.033040 [ 0.106885] pps_core: LinuxPPS API ver. 1 registered Oct 3 12:57:04.033089 [ 0.106890] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 12:57:04.044891 [ 0.106906] PTP clock support registered Oct 3 12:57:04.056893 [ 0.108562] NetLabel: Initializing Oct 3 12:57:04.056893 [ 0.108569] NetLabel: domain hash size = 128 Oct 3 12:57:04.056893 [ 0.108574] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 12:57:04.068870 [ 0.108630] NetLabel: unlabeled traffic allowed by default Oct 3 12:57:04.068870 [ 0.108815] vgaarb: loaded Oct 3 12:57:04.068870 [ 0.109459] clocksource: Switched to clocksource mct-frc Oct 3 12:57:04.080889 [ 0.178233] VFS: Disk quotas dquot_6.6.0 Oct 3 12:57:04.080889 [ 0.178334] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 12:57:04.092887 [ 0.179082] AppArmor: AppArmor Filesystem Enabled Oct 3 12:57:04.092887 [ 0.188232] NET: Registered PF_INET protocol family Oct 3 12:57:04.104885 [ 0.188442] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 12:57:04.104885 [ 0.190079] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 12:57:04.116892 [ 0.190169] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 12:57:04.116892 [ 0.190192] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 12:57:04.128886 [ 0.190287] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 12:57:04.141012 [ 0.190516] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 12:57:04.141076 [ 0.190736] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 12:57:04.152890 [ 0.190822] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 12:57:04.152890 [ 0.190861] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 12:57:04.164892 [ 0.191062] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 12:57:04.164892 [ 0.191097] NET: Registered PF_XDP protocol family Oct 3 12:57:04.177006 [ 0.191107] PCI: CLS 0 bytes, default 64 Oct 3 12:57:04.177071 [ 0.191639] Trying to unpack rootfs image as initramfs... Oct 3 12:57:04.188891 [ 0.192038] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 12:57:04.188891 [ 0.192278] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 12:57:04.200889 [ 0.193891] Initialise system trusted keyrings Oct 3 12:57:04.200889 [ 0.193966] Key type blacklist registered Oct 3 12:57:04.212886 [ 0.194244] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 12:57:04.212886 [ 0.201382] zbud: loaded Oct 3 12:57:04.212886 [ 0.202615] integrity: Platform Keyring initialized Oct 3 12:57:04.224890 [ 0.202652] integrity: Machine keyring initialized Oct 3 12:57:04.224890 [ 0.202660] Key type asymmetric registered Oct 3 12:57:04.236890 [ 0.202667] Asymmetric key parser 'x509' registered Oct 3 12:57:04.236890 [ 1.559719] Freeing initrd memory: 25724K Oct 3 12:57:04.236890 [ 1.571141] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 12:57:04.248889 [ 1.571425] bounce: pool size: 64 pages Oct 3 12:57:04.248889 [ 1.571587] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 12:57:04.261012 [ 1.571749] io scheduler mq-deadline registered Oct 3 12:57:04.261071 [ 1.576881] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 12:57:04.272996 [ 1.597692] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 12:57:04.273064 [ 1.597705] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 12:57:04.285086 [ 1.599992] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 12:57:04.297035 [ 1.600002] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 12:57:04.309040 [ 1.600822] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 12:57:04.309110 [ 1.600832] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 12:57:04.321071 [ 1.601716] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 12:57:04.333052 [ 1.601725] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 12:57:04.333125 [ 1.604041] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 12:57:04.345058 [ 1.606880] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 12:57:04.357060 [ 1.609650] Serial: AMBA driver Oct 3 12:57:04.357118 [ 1.609897] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 12:57:04.368921 [ 1.610394] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 12:57:04.368921 [ 1.610851] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 12:57:04.381079 [ 2.748957] printk: console [ttySAC2] enabled Oct 3 12:57:04.381139 [ 2.753789] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 12:57:04.393054 [ 2.764426] STM32 USART driver initialized Oct 3 12:57:04.404983 [ 2.778527] mousedev: PS/2 mouse device common for all mice Oct 3 12:57:04.416956 [ 2.809821] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 12:57:04.441413 [ 2.818424] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T12:57:06 UTC (1727960226) Oct 3 12:57:04.453330 [ 2.828299] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 12:57:04.464955 [ 2.835750] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 12:57:04.476850 [ 2.843745] NET: Registered PF_INET6 protocol family Oct 3 12:57:04.476850 [ 2.857343] Segment Routing with IPv6 Oct 3 12:57:04.488833 [ 2.859632] In-situ OAM (IOAM) with IPv6 Oct 3 12:57:04.500978 [ 2.863563] mip6: Mobile IPv6 Oct 3 12:57:04.500978 [ 2.866425] NET: Registered PF_PACKET protocol family Oct 3 12:57:04.501177 [ 2.871574] mpls_gso: MPLS GSO support Oct 3 12:57:04.513008 [ 2.875789] ThumbEE CPU extension supported. Oct 3 12:57:04.513074 [ 2.879551] Registering SWP/SWPB emulation handler Oct 3 12:57:04.513122 [ 2.884712] registered taskstats version 1 Oct 3 12:57:04.524971 [ 2.888318] Loading compiled-in X.509 certificates Oct 3 12:57:04.525033 [ 3.348689] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 12:57:04.984877 [ 3.356038] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 12:57:04.996825 [ 3.367065] zswap: loaded using pool lzo/zbud Oct 3 12:57:05.008853 [ 3.371072] Key type .fscrypt registered Oct 3 12:57:05.008853 [ 3.374364] Key type fscrypt-provisioning registered Oct 3 12:57:05.008853 [ 3.388108] Key type encrypted registered Oct 3 12:57:05.020838 [ 3.390710] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 12:57:05.032896 [ 3.396208] ima: No TPM chip found, activating TPM-bypass! Oct 3 12:57:05.032896 [ 3.401627] ima: Allocated hash algorithm: sha256 Oct 3 12:57:05.044883 [ 3.406428] ima: No architecture policies found Oct 3 12:57:05.044883 [ 3.410861] evm: Initialising EVM extended attributes: Oct 3 12:57:05.044883 [ 3.415932] evm: security.selinux Oct 3 12:57:05.057064 [ 3.419223] evm: security.SMACK64 (disabled) Oct 3 12:57:05.057130 [ 3.423472] evm: security.SMACK64EXEC (disabled) Oct 3 12:57:05.057177 [ 3.428072] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 12:57:05.069065 [ 3.433106] evm: security.SMACK64MMAP (disabled) Oct 3 12:57:05.069127 [ 3.437707] evm: security.apparmor Oct 3 12:57:05.069173 [ 3.441078] evm: security.ima Oct 3 12:57:05.081037 [ 3.444043] evm: security.capability Oct 3 12:57:05.081095 [ 3.447602] evm: HMAC attrs: 0x1 Oct 3 12:57:05.081140 [ 4.035457] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 12:57:05.668796 [ 4.041478] clk: Disabling unused clocks Oct 3 12:57:05.680801 [ 4.055091] Freeing unused kernel image (initmem) memory: 2048K Oct 3 12:57:05.692888 [ 4.059938] Checked W+X mappings: passed, no W+X pages found Oct 3 12:57:05.692888 [ 4.065218] Run /init as init process Oct 3 12:57:05.704815 [ 4.636124] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 12:57:06.272833 [ 4.694679] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 12:57:06.332837 [ 4.701740] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 12:57:06.344784 [ 4.718927] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 12:57:06.356838 [ 4.729720] usbcore: registered new interface driver usbfs Oct 3 12:57:06.368841 [ 4.738819] usbcore: registered new interface driver hub Oct 3 12:57:06.380830 [ 4.743619] usbcore: registered new device driver usb Oct 3 12:57:06.380830 [ 4.753143] phy phy-12130000.phy.3: phy_power_on was called before phy_init Oct 3 12:57:06.392789 [ 4.761285] phy phy-12130000.phy.3: phy_power_on was called before phy_init Oct 3 12:57:06.404827 [ 4.771719] exynos-ohci 12120000.usb: USB Host Controller Oct 3 12:57:06.404827 [ 4.777513] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 12:57:06.416867 [ 4.780729] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Oct 3 12:57:06.416867 [ 4.794994] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Oct 3 12:57:06.428791 [ 4.800502] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Oct 3 12:57:06.440836 [ 4.829215] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Oct 3 12:57:06.464832 [ 4.839245] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 12:57:06.476884 [ 4.853839] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 12:57:06.488844 [ 4.862750] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 12:57:06.501000 [ 4.869568] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 12:57:06.512884 [ 4.876797] usb usb1: Product: USB Host Controller Oct 3 12:57:06.512884 [ 4.881541] usb usb1: Manufacturer: Linux 6.1.0-25-armmp ohci_hcd Oct 3 12:57:06.524977 [ 4.887619] usb usb1: SerialNumber: 12120000.usb Oct 3 12:57:06.525042 [ 4.897273] hub 1-0:1.0: USB hub found Oct 3 12:57:06.536988 [ 4.899633] hub 1-0:1.0: 3 ports detected Oct 3 12:57:06.537082 [ 4.904459] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 12:57:06.548833 [ 4.911857] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 12:57:06.548833 [ 4.919023] usb usb2: Product: EHCI Host Controller Oct 3 12:57:06.560874 [ 4.923883] usb usb2: Manufacturer: Linux 6.1.0-25-armmp ehci_hcd Oct 3 12:57:06.560874 [ 4.929954] usb usb2: SerialNumber: 12110000.usb Oct 3 12:57:06.572817 [ 4.947357] hub 2-0:1.0: USB hub found Oct 3 12:57:06.584854 [ 4.949737] hub 2-0:1.0: 3 ports detected Oct 3 12:57:06.584854 [ 4.957522] usb3503 usb-hub: switched to HUB mode Oct 3 12:57:06.596856 [ 4.960795] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 12:57:06.596856 [ 5.248007] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 12:57:06.884884 [ 5.252103] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 12:57:06.896888 [ 5.260249] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 12:57:06.896888 [ 5.269125] xhci-hcd xhci-hcd.2.auto: irq 108, io mem 0x12000000 Oct 3 12:57:06.908891 [ 5.275265] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 12:57:06.908891 [ 5.280525] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 12:57:06.920891 [ 5.281518] usb 2-3: new high-speed USB device number 2 using exynos-ehci Oct 3 12:57:06.932894 [ 5.288187] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 12:57:06.932894 [ 5.301656] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 12:57:06.944879 [ 5.309685] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 12:57:06.944879 [ 5.316882] usb usb3: Product: xHCI Host Controller Oct 3 12:57:06.956893 [ 5.321745] usb usb3: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 12:57:06.956893 [ 5.327818] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 12:57:06.969022 [ 5.333876] hub 3-0:1.0: USB hub found Oct 3 12:57:06.969087 [ 5.336426] hub 3-0:1.0: 1 port detected Oct 3 12:57:06.969133 [ 5.341319] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 12:57:06.981002 [ 5.348547] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 12:57:06.992895 [ 5.356646] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 12:57:06.992895 [ 5.363847] usb usb4: Product: xHCI Host Controller Oct 3 12:57:07.005026 [ 5.368704] usb usb4: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 12:57:07.005094 [ 5.374779] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 12:57:07.016877 [ 5.380788] hub 4-0:1.0: USB hub found Oct 3 12:57:07.016877 [ 5.383416] hub 4-0:1.0: 1 port detected Oct 3 12:57:07.016877 [ 5.458523] usb 2-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Oct 3 12:57:07.100887 [ 5.465262] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 3 12:57:07.100887 [ 5.473060] hub 2-3:1.0: USB hub found Oct 3 12:57:07.112866 [ 5.476268] hub 2-3:1.0: 3 ports detected Oct 3 12:57:07.112866 Starting system log daemon: syslogd, klogd. Oct 3 12:57:07.256824 /var/run/utmp: No such file or directory Oct 3 12:57:09.093056 [?1h=(B   Oct 3 12:57:09.129080  Oct 3 12:57:09.141059 [  (-*) ][ Oct 03 12:57 ] Oct 3 12:57:09.153050 [  (0*start) ][ Oct 03 12:57 ] Oct 3 12:57:09.169090 [  (0*start) ][ Oct 03 12:57 ] Oct 3 12:57:09.181061 [  (0*start) ][ Oct 03 12:57 ] Oct 3 12:57:09.193010 [  (0*start) ][ Oct 03 12:57 ]                        [  (0*start) ][ Oct 03 12:57 ][  (0*start) ][ Oct 03 12:57 ] Oct 3 12:57:09.252838 [ 0- start  (2*shell) ][ Oct 03 12:57 ] Oct 3 12:57:09.264871 [ 0- start  (2*shell) ][ Oct 03 12:57 ] Oct 3 12:57:09.276868 [ 0- start  (2*shell) ][ Oct 03 12:57 ] Oct 3 12:57:09.288894 [ 0- start  (2*shell) ][ Oct 03 12:57 ]                        [ 0- start  (2*shell) ][ Oct 03 12:57 ][ 0- start  (2*shell) ][ Oct 03 12:57 ] Oct 3 12:57:09.348886 [ 0 start 2- shell  (3*shell) ][ Oct 03 12:57 ] Oct 3 12:57:09.360825 [ 0 start 2- shell  (3*shell) ][ Oct 03 12:57 ] Oct 3 12:57:09.373032 [ 0 start 2- shell  (3*shell) ][ Oct 03 12:57 ] Oct 3 12:57:09.385076 [ 0 start 2- shell  (3*shell) ][ Oct 03 12:57 ]                        [ 0 start 2- shell  (3*shell) ][ Oct 03 12:57 ][ 0 start 2- shell  (3*shell) ][ Oct 03 12:57 ] Oct 3 12:57:09.444900 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 12:57 ] Oct 3 12:57:09.456856 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 12:57 ] Oct 3 12:57:09.469077 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 12:57 ] Oct 3 12:57:09.481071 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 12:57 ]                        [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 12:57 ][ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 12:57 ] Oct 3 12:57:09.541060 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 12:57 ] Oct 3 12:57:09.551887 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 12:57 ] Oct 3 12:57:09.564904 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 12:57 ] Oct 3 12:57:09.576892 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 12:57 ]                        [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 12:57 ][ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 12:57 ] Oct 3 12:57:09.636889 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 12:57 ] Oct 3 12:57:09.648900 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 12:57 ] Oct 3 12:57:09.660934 [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 12:57 ] Oct 3 12:57:10.113789 Detecting network hardware ... 2%... 95%... 100% Oct 3 12:57:11.841637 Detecting link on eth0; please wait... ... 0%... 10%... 20% Oct 3 12:57:16.737707 Waiting for link-local address... ... 8%... 16%... 25%... 33%... 41%... 100% Oct 3 12:57:18.029050 Attempting IPv6 autoconfiguration... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 75%... 83%... 91%... 100% Oct 3 12:57:24.097710 Configuring the network with DHCP ... 0%... 100% Oct 3 12:57:27.257757 Checking the Debian archive mirror ... 25%... 50%... 75%... 100% Oct 3 12:57:35.289725 Loading additional components ... 0%... 10%... 20%... 30%... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 12:58 ]... 50%... 60%... 70%... 80%... 90%... 100% Oct 3 12:58:08.493696 Setting up the clock ... 0%... 100% Oct 3 12:58:11.241725 Loading additional components ... 50%... 100% Oct 3 12:58:12.924871 Detecting disks and all other hardware ... 2%... 95%... 100% Oct 3 12:58:17.537647 Loading additional components ... 12%... 25%... 37%... 50%... 62%... 75%... 87%... 100% Oct 3 12:58:24.621741 Loading additional components ... 25%... 50%... 75%... 100% Oct 3 12:58:27.016748 Starting up the partitioner ... 4%... 13%... 21%... 30%... 43%... 52%... 60%... 73%... 82%... 91%... 100% Oct 3 12:58:40.228809 Guided partitioning ... 16%... 33%... 50%... 66%... 83%... 100% Oct 3 12:58:48.488805 Starting up the partitioner ... 4%... 12%... 20%... 32%... 40%... 52%... 60%... 72%... 80%... 92%... 100% Oct 3 12:58:59.393715 [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 12:59 ] Partitions formatting ... 33% Oct 3 12:59:08.195986 Partitions formatting Oct 3 12:59:17.277619 Partitions formatting Installing the base system ... 0%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 13:00 ]... 17%... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 13:01 ]... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 13:02 ]... 48%... 50%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 13:03 ]...  Oct 3 13:03:05.453643  60%... 70%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 13:04 ]... 79%... 83%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 13:05 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 13:06 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 13:07 ]... 91%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 13:08 ]... 100% Oct 3 13:08:42.277587 Configuring apt ... 7%... 14%... 14%... 21%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 13:09 ]... 35%... 42%... 50%... 61%... 71%. Oct 3 13:09:19.401072 ... 82%... 92%... 100% Oct 3 13:09:22.020975 Select and install software ... 1%... 10%... 13%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 13:10 ]... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 13:11 ]... 40%... 50%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 13:12 ]... Oct 3 13:12:07.873747 . 60%... 70%... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 13:13 ]... 88%... 90%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 13:14 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 13:15 ]... 94%... 100% Oct 3 13:15:12.393792 Finishing the installation ... 4%... 12%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 13:16 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 13:17 ]... 16%... 20%... 32%... 40%... 44%... Oct 3 13:17:23.428920  52%... 60%... 72%... 80%... 92% The system is going down NOW! Oct 3 13:17:33.904781 Sent SIGTERM Sent SIGKILL to all processes Oct 3 13:17:34.900782 Requesting system reboot Oct 3 13:17:34.912849 [ 1234.308021] reboot: Reű Oct 3 13:17:36.268815 Oct 3 13:17:36.268815 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 13:17:36.268815 Oct 3 13:17:36.268815 CPU: Exynos5250@1000MHz Oct 3 13:17:36.268815 Oct 3 13:17:36.268815 Board: Arndale Oct 3 13:17:36.280796 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 13:17:36.280796 ready Oct 3 13:17:36.280796 DRAM: 2 GiB Oct 3 13:17:36.280796 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 13:17:36.304759 trace: enabled Oct 3 13:17:36.340762 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 13:17:36.696783 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 13:17:36.756827 In: serial Oct 3 13:17:36.756827 Out: serial Oct 3 13:17:36.756827 Err: serial Oct 3 13:17:36.756827 SCSI: ARNDALE SCSI INIT Oct 3 13:17:36.756827 Target spinup took 0 ms. Oct 3 13:17:36.768823 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 13:17:36.768823 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 13:17:36.780814 Net: Net Initialization Skipped Oct 3 13:17:36.780814 No ethernet found. Oct 3 13:17:36.780814 Hostname: arndale-westfield Oct 3 13:17:36.780814 Hit any key to stop autoboot: 2  1  0 Oct 3 13:17:38.708783 (Re)start USB... Oct 3 13:17:38.708783 USB0: USB EHCI 1.00 Oct 3 13:17:38.708783 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 13:17:44.305891 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 13:17:44.317725 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 13:17:44.761752 Waiting for Ethernet connection... done. Oct 3 13:17:46.357717 BOOTP broadcast 1 Oct 3 13:17:46.357785 BOOTP broadcast 2 Oct 3 13:17:47.557759 BOOTP broadcast 3 Oct 3 13:17:48.565737 DHCP client bound to address 10.149.64.45 (2300 ms) Oct 3 13:17:48.565799 Using asx0 device Oct 3 13:17:48.565842 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 13:17:48.577752 Filename 'pxelinux.0'. Oct 3 13:17:48.577812 Load address: 0x43e00000 Oct 3 13:17:48.577855 Loading: *### Oct 3 13:17:48.601731 2.2 MiB/s Oct 3 13:17:48.601786 done Oct 3 13:17:48.601827 Bytes transferred = 42430 (a5be hex) Oct 3 13:17:48.601871 missing environment variable: pxeuuid Oct 3 13:17:48.601923 Retrieving file: pxelinux.cfg/0A95402D Oct 3 13:17:48.613760 Using asx0 device Oct 3 13:17:48.613815 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 13:17:48.613865 Filename 'pxelinux.cfg/0A95402D'. Oct 3 13:17:48.625753 Load address: 0x51000000 Oct 3 13:17:48.625809 Loading: *# Oct 3 13:17:48.625851 31.3 KiB/s Oct 3 13:17:48.625891 done Oct 3 13:17:48.625929 Bytes transferred = 65 (41 hex) Oct 3 13:17:48.625972 Config file found Oct 3 13:17:48.626012 Ignoring unknown command: serial Oct 3 13:17:48.637724 1: local Oct 3 13:17:48.637778 scanning bus for devices... Oct 3 13:17:48.637823 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 13:17:48.661738 Type: Hard Disk Oct 3 13:17:48.661794 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 13:17:48.673778 Found 1 device(s). Oct 3 13:17:48.673833 Oct 3 13:17:48.673872 SCSI device 0: Oct 3 13:17:48.673912 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 13:17:48.685751 Type: Hard Disk Oct 3 13:17:48.685808 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 13:17:48.685858 ... is now current device Oct 3 13:17:48.697703 Scanning scsi 0... Oct 3 13:17:48.697758 Found U-Boot script /boot.scr Oct 3 13:17:48.805704 639 bytes read in 39 ms (15.6 KiB/s) Oct 3 13:17:48.853730 ## Executing script at 50000000 Oct 3 13:17:48.853786 Loading dtbs/exynos5250-arndale.dtb Oct 3 13:17:48.865685 46686 bytes read in 1565 ms (28.3 KiB/s) Oct 3 13:17:50.389736 Loading vmlinuz-6.1.0-25-armmp-lpae Oct 3 13:17:50.389798 5509632 bytes read in 185 ms (28.4 MiB/s) Oct 3 13:17:50.581732 Loading initrd.img-6.1.0-25-armmp-lpae Oct 3 13:17:50.593670 25732472 bytes read in 1874 ms (13.1 MiB/s) Oct 3 13:17:52.405751 Booting Oct 3 13:17:52.405808 Kernel image @ 0x42000000 [ 0x000000 - 0x541200 ] Oct 3 13:17:52.405855 ## Flattened Device Tree blob at 43000000 Oct 3 13:17:52.417757 Booting using the fdt blob at 0x43000000 Oct 3 13:17:52.417816 Loading Ramdisk to 4e775000, end 4ffff578 ... OK Oct 3 13:17:52.837719 Loading Device Tree to 4e766000, end 4e77465d ... OK Oct 3 13:17:52.837782 Oct 3 13:17:52.849724 Starting kernel ...(fake run for tracing) Oct 3 13:17:52.849784 Oct 3 13:17:52.849823 Oct 3 13:17:52.849861 Starting kernel ... Oct 3 13:17:52.849902 Oct 3 13:17:52.849939 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 13:17:59.005784 [ 0.000000] Linux version 6.1.0-25-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.106-3 (2024-08-26) Oct 3 13:17:59.029733 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=30c5387d Oct 3 13:17:59.029800 [ 0.000000] CPU: div instructions available: patching division code Oct 3 13:17:59.041747 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 13:17:59.041846 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 13:17:59.053787 [ 0.000000] Memory policy: Data cache writealloc Oct 3 13:17:59.053847 [ 0.000000] efi: UEFI not found. Oct 3 13:17:59.065755 [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000 Oct 3 13:17:59.065817 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 13:17:59.065863 [ 0.000000] Zone ranges: Oct 3 13:17:59.077753 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 13:17:59.077815 [ 0.000000] Normal empty Oct 3 13:17:59.077859 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 13:17:59.089752 [ 0.000000] Movable zone start for each node Oct 3 13:17:59.089811 [ 0.000000] Early memory node ranges Oct 3 13:17:59.101755 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 13:17:59.101818 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 13:17:59.113763 [ 0.000000] percpu: Embedded 18 pages/cpu s44820 r8192 d20716 u73728 Oct 3 13:17:59.113827 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 13:17:59.125757 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=ttySAC2,115200n8 Oct 3 13:17:59.137787 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 13:17:59.137856 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 13:17:59.149796 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 13:17:59.149859 [ 0.000000] Memory: 2015504K/2097152K available (12288K kernel code, 1717K rwdata, 3748K rodata, 2048K init, 383K bss, 65264K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 13:17:59.173786 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 13:17:59.173849 [ 0.000000] ftrace: allocating 39996 entries in 118 pages Oct 3 13:17:59.185766 [ 0.000000] ftrace: allocated 118 pages with 5 groups Oct 3 13:17:59.185827 [ 0.000000] trace event string verifier disabled Oct 3 13:17:59.197755 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 13:17:59.197816 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 13:17:59.197868 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 13:17:59.209738 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 13:17:59.209799 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 13:17:59.221744 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 13:17:59.221808 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 13:17:59.233777 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 13:17:59.233838 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 13:17:59.245749 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 13:17:59.245812 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 13:17:59.257784 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 13:17:59.269711 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 13:17:59.269777 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 13:17:59.281771 [ 0.002620] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 13:17:59.281833 [ 0.002634] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 13:17:59.293789 [ 0.002649] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 13:17:59.305772 [ 0.002660] Ignoring duplicate/late registration of read_current_timer delay Oct 3 13:17:59.317762 [ 0.003024] Console: colour dummy device 80x30 Oct 3 13:17:59.317842 [ 0.003066] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 13:17:59.329762 [ 0.003079] CPU: Testing write buffer coherency: ok Oct 3 13:17:59.329822 [ 0.003121] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 13:17:59.341762 [ 0.003129] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 13:17:59.341825 [ 0.003136] pid_max: default: 32768 minimum: 301 Oct 3 13:17:59.353764 [ 0.003505] LSM: Security Framework initializing Oct 3 13:17:59.353824 [ 0.003578] landlock: Up and running. Oct 3 13:17:59.365761 [ 0.003583] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 13:17:59.365826 [ 0.003769] AppArmor: AppArmor initialized Oct 3 13:17:59.365873 [ 0.003782] TOMOYO Linux initialized Oct 3 13:17:59.377773 [ 0.003826] LSM support for eBPF active Oct 3 13:17:59.377832 [ 0.004073] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 13:17:59.389769 [ 0.004088] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 13:17:59.389837 [ 0.005500] /cpus/cpu@0 missing clock-frequency property Oct 3 13:17:59.401758 [ 0.005527] /cpus/cpu@1 missing clock-frequency property Oct 3 13:17:59.401820 [ 0.005541] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 13:17:59.413750 [ 0.006493] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 13:17:59.413819 [ 0.006500] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 13:17:59.425750 [ 0.006601] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 13:17:59.425818 [ 0.006607] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 13:17:59.437767 [ 0.006747] Setting up static identity map for 0x40400000 - 0x404000ac Oct 3 13:17:59.437831 [ 0.007916] rcu: Hierarchical SRCU implementation. Oct 3 13:17:59.449758 [ 0.007922] rcu: Max phase no-delay instances is 1000. Oct 3 13:17:59.449819 [ 0.010058] EFI services will not be available. Oct 3 13:17:59.461746 [ 0.010399] smp: Bringing up secondary CPUs ... Oct 3 13:17:59.461807 [ 0.011146] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 13:17:59.461857 [ 0.011158] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 13:17:59.473779 [ 0.011286] smp: Brought up 1 node, 2 CPUs Oct 3 13:17:59.485761 [ 0.011295] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 13:17:59.485825 [ 0.011303] CPU: All CPU(s) started in HYP mode. Oct 3 13:17:59.497764 [ 0.011307] CPU: Virtualization extensions available. Oct 3 13:17:59.497828 [ 0.012176] devtmpfs: initialized Oct 3 13:17:59.497873 [ 0.023168] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 13:17:59.509765 [ 0.023401] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 13:17:59.521761 [ 0.023426] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 13:17:59.521826 [ 0.023969] pinctrl core: initialized pinctrl subsystem Oct 3 13:17:59.533773 [ 0.024719] DMI not present or invalid. Oct 3 13:17:59.533832 [ 0.025395] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 13:17:59.533883 [ 0.026945] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 13:17:59.545782 [ 0.028460] audit: initializing netlink subsys (disabled) Oct 3 13:17:59.545844 [ 0.028666] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 Oct 3 13:17:59.557819 [ 0.029842] thermal_sys: Registered thermal governor 'fair_share' Oct 3 13:17:59.569754 [ 0.029849] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 13:17:59.569817 [ 0.029854] thermal_sys: Registered thermal governor 'step_wise' Oct 3 13:17:59.581754 [ 0.029859] thermal_sys: Registered thermal governor 'user_space' Oct 3 13:17:59.581837 [ 0.029863] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 13:17:59.593751 [ 0.030065] No ATAGs? Oct 3 13:17:59.593807 [ 0.030132] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 13:17:59.605776 [ 0.030141] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 13:17:59.605840 [ 0.031222] Serial: AMBA PL011 UART driver Oct 3 13:17:59.605887 [ 0.080600] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 13:17:59.617768 [ 0.087537] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 13:17:59.629754 [ 0.091750] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages Oct 3 13:17:59.629817 [ 0.091759] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page Oct 3 13:17:59.641762 [ 0.099297] iommu: Default domain type: Translated Oct 3 13:17:59.641823 [ 0.099305] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 13:17:59.653759 [ 0.100283] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 13:17:59.653823 [ 0.100796] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 13:17:59.665753 [ 0.100808] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 13:17:59.665816 [ 0.101321] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 13:17:59.677776 [ 0.101351] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 13:17:59.689755 [ 0.101595] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 13:17:59.689817 [ 0.102095] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 13:17:59.689864 [ 0.102105] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 13:17:59.701770 [ 0.102481] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 13:17:59.701831 [ 0.102773] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 13:17:59.713749 [ 0.102783] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 13:17:59.713811 [ 0.103076] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 13:17:59.725759 [ 0.103206] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 13:17:59.725819 [ 0.103215] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 13:17:59.737762 [ 0.103395] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 13:17:59.737823 [ 0.103613] pps_core: LinuxPPS API ver. 1 registered Oct 3 13:17:59.737872 [ 0.103618] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 13:17:59.749772 [ 0.103635] PTP clock support registered Oct 3 13:17:59.761747 [ 0.105135] NetLabel: Initializing Oct 3 13:17:59.761806 [ 0.105141] NetLabel: domain hash size = 128 Oct 3 13:17:59.761854 [ 0.105146] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 13:17:59.773766 [ 0.105199] NetLabel: unlabeled traffic allowed by default Oct 3 13:17:59.773828 [ 0.105369] vgaarb: loaded Oct 3 13:17:59.773872 [ 0.106268] clocksource: Switched to clocksource mct-frc Oct 3 13:17:59.785768 [ 0.106851] VFS: Disk quotas dquot_6.6.0 Oct 3 13:17:59.785828 [ 0.106935] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 13:17:59.797755 [ 0.107760] AppArmor: AppArmor Filesystem Enabled Oct 3 13:17:59.797816 [ 0.117630] NET: Registered PF_INET protocol family Oct 3 13:17:59.797864 [ 0.117823] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 13:17:59.809777 [ 0.119287] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 13:17:59.821761 [ 0.119388] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 13:17:59.821829 [ 0.119413] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 13:17:59.833719 [ 0.119514] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 13:17:59.845754 [ 0.119746] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 13:17:59.845836 [ 0.119975] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 13:17:59.857778 [ 0.120066] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 13:17:59.857841 [ 0.120107] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 13:17:59.869765 [ 0.120345] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 13:17:59.869828 [ 0.120381] NET: Registered PF_XDP protocol family Oct 3 13:17:59.881752 [ 0.120392] PCI: CLS 0 bytes, default 64 Oct 3 13:17:59.881811 [ 0.120892] Trying to unpack rootfs image as initramfs... Oct 3 13:17:59.893757 [ 0.121254] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 13:17:59.893826 [ 0.122511] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 13:17:59.905775 [ 0.194217] Initialise system trusted keyrings Oct 3 13:17:59.905834 [ 0.194356] Key type blacklist registered Oct 3 13:17:59.917756 [ 0.195546] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 13:17:59.917820 [ 0.203477] zbud: loaded Oct 3 13:17:59.917864 [ 0.204664] integrity: Platform Keyring initialized Oct 3 13:17:59.929755 [ 0.204700] integrity: Machine keyring initialized Oct 3 13:17:59.929816 [ 0.204709] Key type asymmetric registered Oct 3 13:17:59.941749 [ 0.204717] Asymmetric key parser 'x509' registered Oct 3 13:17:59.941812 [ 1.421954] Freeing initrd memory: 25132K Oct 3 13:17:59.941859 [ 1.443981] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 13:17:59.953767 [ 1.444249] bounce: pool size: 64 pages Oct 3 13:17:59.953826 [ 1.444436] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 13:17:59.965758 [ 1.444605] io scheduler mq-deadline registered Oct 3 13:17:59.965817 [ 1.449729] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 13:17:59.977768 [ 1.470726] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 13:17:59.977836 [ 1.470738] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 13:17:59.989778 [ 1.473010] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 13:18:00.001762 [ 1.473020] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 13:18:00.013743 [ 1.473827] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 13:18:00.013814 [ 1.473836] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 13:18:00.025767 [ 1.474689] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 13:18:00.037761 [ 1.474698] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 13:18:00.037836 [ 1.477027] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 13:18:00.049771 [ 1.479876] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 13:18:00.061763 [ 1.482633] Serial: AMBA driver Oct 3 13:18:00.061821 [ 1.482857] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 13:18:00.073753 [ 1.483334] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 13:18:00.073825 [ 1.483799] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 13:18:00.085764 [ 2.564525] printk: console [ttySAC2] enabled Oct 3 13:18:00.085823 [ 2.569354] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 13:18:00.097802 [ 2.580001] STM32 USART driver initialized Oct 3 13:18:00.109761 [ 2.594434] mousedev: PS/2 mouse device common for all mice Oct 3 13:18:00.121694 [ 2.625683] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 13:18:00.145793 [ 2.634303] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T13:18:01 UTC (1727961481) Oct 3 13:18:00.157765 [ 2.644151] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 13:18:00.169758 [ 2.651619] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 13:18:00.181735 [ 2.659625] NET: Registered PF_INET6 protocol family Oct 3 13:18:00.181797 [ 2.683718] Segment Routing with IPv6 Oct 3 13:18:00.205741 [ 2.685965] In-situ OAM (IOAM) with IPv6 Oct 3 13:18:00.217743 [ 2.689930] mip6: Mobile IPv6 Oct 3 13:18:00.217801 [ 2.692798] NET: Registered PF_PACKET protocol family Oct 3 13:18:00.217851 [ 2.697945] mpls_gso: MPLS GSO support Oct 3 13:18:00.217896 [ 2.701993] ThumbEE CPU extension supported. Oct 3 13:18:00.229756 [ 2.705824] Registering SWP/SWPB emulation handler Oct 3 13:18:00.229817 [ 2.711075] registered taskstats version 1 Oct 3 13:18:00.241716 [ 2.714689] Loading compiled-in X.509 certificates Oct 3 13:18:00.241777 [ 3.174845] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 13:18:00.709825 [ 3.182162] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 13:18:00.709900 [ 3.193235] zswap: loaded using pool lzo/zbud Oct 3 13:18:00.721821 [ 3.197222] Key type .fscrypt registered Oct 3 13:18:00.721881 [ 3.200495] Key type fscrypt-provisioning registered Oct 3 13:18:00.721929 [ 3.224677] Key type encrypted registered Oct 3 13:18:00.745790 [ 3.227274] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 13:18:00.757825 [ 3.232729] ima: No TPM chip found, activating TPM-bypass! Oct 3 13:18:00.757888 [ 3.238196] ima: Allocated hash algorithm: sha256 Oct 3 13:18:00.769755 [ 3.242915] ima: No architecture policies found Oct 3 13:18:00.769816 [ 3.247424] evm: Initialising EVM extended attributes: Oct 3 13:18:00.769864 [ 3.252497] evm: security.selinux Oct 3 13:18:00.781767 [ 3.255788] evm: security.SMACK64 (disabled) Oct 3 13:18:00.781828 [ 3.260039] evm: security.SMACK64EXEC (disabled) Oct 3 13:18:00.781875 [ 3.264642] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 13:18:00.793771 [ 3.269676] evm: security.SMACK64MMAP (disabled) Oct 3 13:18:00.793832 [ 3.274275] evm: security.apparmor Oct 3 13:18:00.805732 [ 3.277643] evm: security.ima Oct 3 13:18:00.805791 [ 3.280608] evm: security.capability Oct 3 13:18:00.805837 [ 3.284173] evm: HMAC attrs: 0x1 Oct 3 13:18:00.805881 [ 3.871592] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 13:18:01.393743 [ 3.877572] clk: Disabling unused clocks Oct 3 13:18:01.405720 [ 3.890437] Freeing unused kernel image (initmem) memory: 2048K Oct 3 13:18:01.417762 [ 3.895300] Checked W+X mappings: passed, no W+X pages found Oct 3 13:18:01.417825 [ 3.900560] Run /init as init process Oct 3 13:18:01.429695 Loading, please wait... Oct 3 13:18:01.453704 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 13:18:01.537679 [ 4.818375] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 13:18:02.341743 [ 4.840284] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 13:18:02.365759 [ 4.854544] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 13:18:02.389708 [ 4.863122] usbcore: registered new interface driver usbfs Oct 3 13:18:02.389771 [ 4.894743] usbcore: registered new interface driver hub Oct 3 13:18:02.425751 [ 4.898892] Synopsys Designware Multimedia Card Interface Driver Oct 3 13:18:02.425815 [ 4.908612] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 13:18:02.437761 [ 4.910784] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 13:18:02.437826 [ 4.921113] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 13:18:02.449758 [ 4.927362] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 13:18:02.449820 [ 4.939008] usbcore: registered new device driver usb Oct 3 13:18:02.461769 [ 4.953883] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 13:18:02.485738 [ 4.955294] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo Oct 3 13:18:02.485811 [ 4.958893] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 13:18:02.497752 [ 4.968852] mmc_host mmc0: card is polling. Oct 3 13:18:02.497812 [ 5.003176] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 13:18:02.533682 [ 5.023808] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo Oct 3 13:18:02.557728 [ 5.033508] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 13:18:02.557801 [ 5.070343] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 13:18:02.605702 [ 5.117822] phy phy-12130000.phy.2: phy_power_on was called before phy_init Oct 3 13:18:02.641717 [ 5.127679] phy phy-12130000.phy.2: phy_power_on was called before phy_init Oct 3 13:18:02.653684 [ 5.139773] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 13:18:02.665745 [ 5.148893] exynos-ohci 12120000.usb: USB Host Controller Oct 3 13:18:02.677805 [ 5.152909] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Oct 3 13:18:02.677881 [ 5.165190] SCSI subsystem initialized Oct 3 13:18:02.689714 [ 5.172558] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Oct 3 13:18:02.701717 [ 5.185921] exynos-ohci 12120000.usb: irq 109, io mem 0x12120000 Oct 3 13:18:02.713772 [ 5.192731] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 13:18:02.725696 [ 5.211834] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 13:18:02.737764 [ 5.220708] mmc0: new DDR MMC card at address 0001 Oct 3 13:18:02.749781 [ 5.226492] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 13:18:02.749882 [ 5.233409] exynos-ehci 12110000.usb: irq 109, io mem 0x12110000 Oct 3 13:18:02.761757 [ 5.234667] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 13:18:02.773750 [ 5.238641] mmc1: new high speed SDHC card at address aaaa Oct 3 13:18:02.773813 [ 5.246675] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Oct 3 13:18:02.773861 [ 5.264498] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 13:18:02.797757 [ 5.271356] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 13:18:02.797824 [ 5.274842] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 13:18:02.809750 [ 5.278526] usb usb1: Product: USB Host Controller Oct 3 13:18:02.809812 [ 5.289291] usb usb1: Manufacturer: Linux 6.1.0-25-armmp-lpae ohci_hcd Oct 3 13:18:02.821756 [ 5.289907] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 13:18:02.821825 [ 5.295798] usb usb1: SerialNumber: 12120000.usb Oct 3 13:18:02.833764 [ 5.308602] hub 1-0:1.0: USB hub found Oct 3 13:18:02.833823 [ 5.312630] mmcblk0: p1 p2 p3 p4 Oct 3 13:18:02.833869 [ 5.317427] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Oct 3 13:18:02.845733 [ 5.322027] hub 1-0:1.0: 3 ports detected Oct 3 13:18:02.845793 [ 5.330144] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Oct 3 13:18:02.857749 [ 5.337767] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 13:18:02.869763 [ 5.338990] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (241:0) Oct 3 13:18:02.869826 [ 5.344632] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 13:18:02.881774 [ 5.357972] usb usb2: Product: EHCI Host Controller Oct 3 13:18:02.881834 [ 5.362812] usb usb2: Manufacturer: Linux 6.1.0-25-armmp-lpae ehci_hcd Oct 3 13:18:02.893759 [ 5.369323] usb usb2: SerialNumber: 12110000.usb Oct 3 13:18:02.893840 [ 5.382545] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Oct 3 13:18:02.905727 [ 5.386051] hub 2-0:1.0: USB hub found Oct 3 13:18:02.905785 [ 5.397073] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 13:18:02.929748 [ 5.402742] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Oct 3 13:18:02.929820 [ 5.404901] hub 2-0:1.0: 3 ports detected Oct 3 13:18:02.941754 [ 5.411534] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 13:18:02.941827 [ 5.434154] scsi host0: ahci-dwc Oct 3 13:18:02.953742 [ 5.436417] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 110 Oct 3 13:18:02.965739 [ 5.691044] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 13:18:03.217728 [ 5.765226] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 13:18:03.289758 [ 5.873672] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 13:18:03.397762 [ 5.914335] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 13:18:03.445747 [ 5.919950] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 13:18:03.445813 [ 5.925750] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 13:18:03.457763 [ 5.933248] ata1.00: configured for UDMA/133 Oct 3 13:18:03.457823 [ 5.937152] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 13:18:03.469699 [ 5.981643] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 13:18:03.505771 [ 5.995165] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 13:18:03.517733 [ 5.999259] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 13:18:03.529765 [ 6.007364] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 13:18:03.541753 [ 6.016263] xhci-hcd xhci-hcd.2.auto: irq 111, io mem 0x12000000 Oct 3 13:18:03.541816 [ 6.025968] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 13:18:03.553777 [ 6.030012] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 13:18:03.553846 [ 6.037642] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 13:18:03.565766 [ 6.044303] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 13:18:03.577762 [ 6.052407] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 13:18:03.577831 [ 6.059610] usb usb3: Product: xHCI Host Controller Oct 3 13:18:03.589755 [ 6.064468] usb usb3: Manufacturer: Linux 6.1.0-25-armmp-lpae xhci-hcd Oct 3 13:18:03.589819 [ 6.070968] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 13:18:03.601749 [ 6.077393] hub 3-0:1.0: USB hub found Oct 3 13:18:03.601809 [ 6.079768] hub 3-0:1.0: 1 port detected Oct 3 13:18:03.601855 [ 6.085176] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 13:18:03.613816 [ 6.092008] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 13:18:03.625766 [ 6.101334] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 13:18:03.625836 [ 6.109397] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 13:18:03.637781 [ 6.116577] usb usb4: Product: xHCI Host Controller Oct 3 13:18:03.637841 [ 6.121442] usb usb4: Manufacturer: Linux 6.1.0-25-armmp-lpae xhci-hcd Oct 3 13:18:03.649765 [ 6.127943] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 13:18:03.649827 [ 6.134426] hub 4-0:1.0: USB hub found Oct 3 13:18:03.661749 [ 6.136766] hub 4-0:1.0: 1 port detected Oct 3 13:18:03.688441 [ 6.149390] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 13:18:03.688603 [ 6.155475] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 13:18:03.688678 [ 6.171446] sd 0:0:0:0: [sda] Write Protect is off Oct 3 13:18:03.697757 [ 6.175016] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 13:18:03.709729 [ 6.183970] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 13:18:03.709793 [ 6.201209] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 13:18:03.733668 [ 6.223031] sda: sda1 sda2 < sda5 > Oct 3 13:18:03.745747 [ 6.225857] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 13:18:03.757659 [ 6.309186] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 13:18:03.841704 [ 6.417167] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 13:18:03.949707 [ 6.525150] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 13:18:04.057711 [ 6.633115] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 13:18:04.165720 [ 7.041616] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 13:18:04.573716 [ 7.149221] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 13:18:04.681716 [ 7.306292] random: crng init done Oct 3 13:18:04.825715 [ 7.419322] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. Oct 3 13:18:04.957753 [ 7.430222] device-mapper: uevent: version 1.0.3 Oct 3 13:18:04.957814 [ 7.438333] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Oct 3 13:18:04.969720 [ 7.757300] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 13:18:05.281759 Begin: Loading essential drivers ... done. Oct 3 13:18:05.545693 Begin: Running /scripts/init-premount ... done. Oct 3 13:18:08.557807 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 13:18:08.569703 Begin: Running /scripts/local-premount ... done. Oct 3 13:18:08.641690 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 13:18:08.689700 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 13:18:08.785772 /dev/mapper/arndale--westfield--vg-root: clean, 39343/1220608 files, 378262/4882432 blocks Oct 3 13:18:08.989760 done. Oct 3 13:18:09.001691 [ 11.611830] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 13:18:09.133749 [ 11.807665] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 13:18:09.337720 done. Oct 3 13:18:09.337771 Begin: Running /scripts/local-bottom ... done. Oct 3 13:18:09.385763 Begin: Running /scripts/init-bottom ... done. Oct 3 13:18:09.433682 [ 12.124347] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. Oct 3 13:18:09.649754 INIT: version 3.06 booting Oct 3 13:18:09.997680 INIT: No inittab.d directory found Oct 3 13:18:10.081699 Using makefile-style concurrent boot in runlevel S. Oct 3 13:18:10.441711 Starting hotplug events dispatcher: systemd-udevd. Oct 3 13:18:12.061710 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 13:18:12.301721 Synthesizing the initial hotplug events (devices)...done. Oct 3 13:18:12.877695 Waiting for /dev to be fully populated...[ 15.619768] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Oct 3 13:18:13.153685 [ 15.656527] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 13:18:13.189673 [ 15.679565] sd 0:0:0:0: Attached scsi generic sg0 type 0 Oct 3 13:18:13.201725 [ 15.806324] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 13:18:13.333760 [ 15.867315] panfrost 11800000.gpu: clock rate = 533000000 Oct 3 13:18:13.393801 [ 15.875066] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 13:18:13.405723 [ 15.892375] panfrost 11800000.gpu: mali-t600 id 0x600 major 0x0 minor 0x0 status 0x1 Oct 3 13:18:13.417768 [ 15.898727] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,31b4dfff Oct 3 13:18:13.429750 [ 15.906863] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 Oct 3 13:18:13.441752 [ 15.918583] panfrost 11800000.gpu: shader_present=0xf l2_present=0x1 Oct 3 13:18:13.441815 [ 15.928860] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 0 Oct 3 13:18:13.453749 [ 15.966334] usb3503 usb-hub: switched to HUB mode Oct 3 13:18:13.489750 [ 15.969620] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 13:18:13.501730 [ 15.983669] blk_print_req_error: 6 callbacks suppressed Oct 3 13:18:13.513753 [ 15.983678] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 13:18:13.513827 [ 16.096953] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 13:18:13.621825 [ 16.205233] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 13:18:13.729771 [ 16.290407] usb 2-3: new high-speed USB device number 2 using exynos-ehci Oct 3 13:18:13.813754 [ 16.314085] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 13:18:13.849674 [ 16.422414] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 13:18:13.957680 [ 16.476621] usb 2-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Oct 3 13:18:14.005760 [ 16.483431] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 3 13:18:14.017736 [ 16.492521] hub 2-3:1.0: USB hub found Oct 3 13:18:14.017796 [ 16.494996] hub 2-3:1.0: 3 ports detected Oct 3 13:18:14.017842 [ 16.530847] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 13:18:14.065689 [ 16.638972] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 13:18:14.173697 [ 16.724995] OF: graph: no port node found in /soc/hdmi@14530000 Oct 3 13:18:14.245730 [ 16.747181] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 13:18:14.281684 [ 16.798300] usb 2-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 13:18:14.329708 [ 16.912867] usb 2-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=77.32 Oct 3 13:18:14.437773 [ 16.920184] usb 2-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Oct 3 13:18:14.449749 [ 16.927290] usb 2-3.2: Product: USB2.0 Hub Oct 3 13:18:14.449807 [ 16.941224] hub 2-3.2:1.0: USB hub found Oct 3 13:18:14.461721 [ 16.945750] hub 2-3.2:1.0: 4 ports detected Oct 3 13:18:14.473729 [ 17.158134] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 13:18:14.689718 [ 17.266040] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 13:18:14.797750 [ 17.280933] usb 2-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 13:18:14.809716 [ 17.400846] usb 2-3.2.4: New USB device found, idVendor=0b95, idProduct=772a, bcdDevice= 0.01 Oct 3 13:18:14.929779 [ 17.408104] usb 2-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Oct 3 13:18:14.941759 [ 17.416106] usb 2-3.2.4: Product: AX88772 Oct 3 13:18:14.941817 [ 17.419592] usb 2-3.2.4: Manufacturer: ASIX Elec. Corp. Oct 3 13:18:14.941866 [ 17.424820] usb 2-3.2.4: SerialNumber: 000001 Oct 3 13:18:14.953707 [ 17.832316] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 13:18:15.361724 [ 17.875312] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 13:18:15.397762 [ 18.540932] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 13:18:16.069826 [ 18.556482] Asix Electronics AX88772A usb-002:004:10: attached PHY driver (mii_bus:phy_addr=usb-002:004:10, irq=POLL) Oct 3 13:18:16.081771 [ 18.570373] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, fa:12:c6:0d:f8:39 Oct 3 13:18:16.105733 [ 18.584904] usbcore: registered new interface driver asix Oct 3 13:18:16.105795 done. Oct 3 13:18:16.393682 [ 19.300687] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 13:18:16.825723 Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). Oct 3 13:18:16.861726 Checking file systems.../dev/sda1: clean, 922/61056 files, 25402/243968 blocks Oct 3 13:18:18.409743 done. Oct 3 13:18:18.445681 Cleaning up temporary files... /tmp. Oct 3 13:18:18.685707 [ 21.391971] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 13:18:18.913781 [ 21.440592] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 13:18:18.973712 [ 21.714443] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k FS Oct 3 13:18:19.249713 Mounting local filesystems...done. Oct 3 13:18:19.645714 Activating swapfile swap, if any...done. Oct 3 13:18:19.645773 Cleaning up temporary files.... Oct 3 13:18:19.693711 Starting Setting kernel variables: sysctl. Oct 3 13:18:19.921732 [ 22.872551] audit: type=1400 audit(1727961501.536:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=880 comm="apparmor_parser" Oct 3 13:18:20.405769 [ 22.888478] audit: type=1400 audit(1727961501.540:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=881 comm="apparmor_parser" Oct 3 13:18:20.429762 [ 22.902392] audit: type=1400 audit(1727961501.544:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=881 comm="apparmor_parser" Oct 3 13:18:20.441713 [ 23.190590] asix 2-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 13:18:20.717727 [ 23.287190] audit: type=1400 audit(1727961501.952:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=923 comm="apparmor_parser" Oct 3 13:18:20.825731 [ 23.307190] audit: type=1400 audit(1727961501.968:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=923 comm="apparmor_parser" Oct 3 13:18:20.837778 [ 23.320615] audit: type=1400 audit(1727961501.968:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=923 comm="apparmor_parser" Oct 3 13:18:20.861701 [ 23.632946] audit: type=1400 audit(1727961502.296:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=916 comm="apparmor_parser" Oct 3 13:18:21.173716 [ 23.663302] audit: type=1400 audit(1727961502.316:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=916 comm="apparmor_parser" Oct 3 13:18:21.197774 [ 23.679176] audit: type=1400 audit(1727961502.320:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=916 comm="apparmor_parser" Oct 3 13:18:21.221767 [ 23.696764] audit: type=1400 audit(1727961502.336:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=944 comm="apparmor_parser" Oct 3 13:18:21.233776 Starting: AppArmorLoading AppArmor profiles...done. Oct 3 13:18:21.233863 . Oct 3 13:18:21.233915 [ 25.384143] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 13:18:22.913758 [ 25.390221] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 3 13:18:22.913860 Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1 Oct 3 13:18:24.533772 Copyright 2004-2022 Internet Systems Consortium. Oct 3 13:18:24.545752 All rights reserved. Oct 3 13:18:24.545808 For info, please visit https://www.isc.org/software/dhcp/ Oct 3 13:18:24.545857 Oct 3 13:18:24.545895 Listening on LPF/eth0/a6:46:13:77:e8:2f Oct 3 13:18:24.557756 Sending on LPF/eth0/a6:46:13:77:e8:2f Oct 3 13:18:24.557815 Sending on Socket/fallback Oct 3 13:18:24.557859 Created duid "\000\001\000\001.\221V\035\246F\023w\350/". Oct 3 13:18:24.557906 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 Oct 3 13:18:24.569720 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 Oct 3 13:18:24.881744 DHCPOFFER of 10.149.64.45 from 10.149.64.4 Oct 3 13:18:24.893759 DHCPREQUEST for 10.149.64.45 on eth0 to 255.255.255.255 port 67 Oct 3 13:18:24.893822 DHCPACK of 10.149.64.45 from 10.149.64.4 Oct 3 13:18:24.893868 bound to 10.149.64.45 -- renewal in 232 seconds. Oct 3 13:18:24.905686 done. Oct 3 13:18:24.905738 Cleaning up temporary files.... Oct 3 13:18:24.929698 Starting nftables: none Oct 3 13:18:25.013705 . Oct 3 13:18:25.361684 INIT: Entering runlevel: 2 Oct 3 13:18:25.397680 Using makefile-style concurrent boot in runlevel 2. Oct 3 13:18:25.445731 Starting Apache httpd web server: apache2[ 28.640770] exynos4-fb 14400000.fimd: deferred probe timeout, ignoring dependency Oct 3 13:18:26.165750 [ 28.653218] exynos-mixer 14450000.mixer: deferred probe timeout, ignoring dependency Oct 3 13:18:26.177753 [ 28.660908] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations Oct 3 13:18:26.189761 [ 28.667268] exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm]) Oct 3 13:18:26.201751 [ 28.675872] exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm]) Oct 3 13:18:26.201820 [ 28.685257] exynos-drm exynos-drm: bound 14500000.dsi (ops hdmi_enable [exynosdrm]) Oct 3 13:18:26.213746 [ 28.694950] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm]) Oct 3 13:18:26.225742 [ 28.710222] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 13:18:26.237757 [ 28.717872] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 13:18:26.249740 [ 28.725016] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 Oct 3 13:18:26.249805 . Oct 3 13:18:27.573675 Starting NTP server: ntpd2024-10-03T13:18:29 ntpd[1129]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 13:18:27.969760 2024-10-03T13:18:29 ntpd[1129]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 13:18:27.981722 . Oct 3 13:18:27.981774 Starting periodic command scheduler: cron. Oct 3 13:18:28.173715 Starting system message bus: dbus. Oct 3 13:18:28.509711 Starting OpenBSD Secure Shell server: sshd. Oct 3 13:18:29.169714 Oct 3 13:18:30.237737 Debian GNU/Linux 12 arndale-westfield ttySAC2 Oct 3 13:18:30.237803 Oct 3 13:18:30.237843 arndale-westfield login: INIT: Switching to r INIT: No inittab.d directorUsing makefile-style concurrent boot in runlevel 6. Oct 3 13:23:34.469777 Stopping SMP IRQ Balancer: irqbalance. Oct 3 13:23:34.553675 Stopping hotplug events dispatcher: systemd-udevd. Oct 3 13:23:34.577711 Stopping nftables: none. Oct 3 13:23:34.577767 Saving the system clock to /dev/rtc0. Oct 3 13:23:34.937735 Hardware Clock updated to Thu Oct 3 13:23:36 UTC 2024. Oct 3 13:23:34.949700 Stopping Apache httpd web server: apache2. Oct 3 13:23:35.705724 Asking all remaining processes to terminate...done. Oct 3 13:23:36.029632 All processes ended within 1 seconds...done. Oct 3 13:23:36.029666 Deconfiguring network interfaces...ifdown: ignoring unknown interface eth0=eth0 Oct 3 13:23:36.221643 done. Oct 3 13:23:36.221672 [ 338.890145] EXT4-fs (sda1): unmounting filesystem. Oct 3 13:23:36.413612 Deactivating swap...done. Oct 3 13:23:36.473621 Unmounting local filesystems...done. Oct 3 13:23:36.473672 [ 339.171645] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 13:23:36.693061 Will now restart. Oct 3 13:23:37.004978 [ 339.522591] asix 2-3.2.4:1.0 eth0: Link is Down Oct 3 13:23:37.052973 [ 339.591311] sd 0:0:0:0: [sda] Synchronizing SCSI cache Oct 3 13:23:37.113014 [ 339.599068] wake enabled for irq 101 (gpx1-4) Oct 3 13:23:37.125037 [ 339.601954] wake enabled for irq 102 (gpx1-5) Oct 3 13:23:37.125096 [ 339.606315] wake enabled for irq 103 (gpx1-6) Oct 3 13:23:37.137015 [ 339.610649] wake enabled for irq 104 (gpx1-7) Oct 3 13:23:37.137076 [ 339.614990] wake enabled for irq 105 (gpx2-0) Oct 3 13:23:37.137123 [ 339.619336] wake enabled for irq 106 (gpx2-1) Oct 3 13:23:37.148986 [ 339.624152] reboot: Reű Oct 3 13:23:37.485033 Oct 3 13:23:37.485100 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 13:23:37.485154 Oct 3 13:23:37.485191 CPU: Exynos5250@1000MHz Oct 3 13:23:37.485273 Oct 3 13:23:37.496983 Board: Arndale Oct 3 13:23:37.497032 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 13:23:37.497080 ready Oct 3 13:23:37.497119 DRAM: 2 GiB Oct 3 13:23:37.497158 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 13:23:37.520863 trace: enabled Oct 3 13:23:37.556945 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 13:23:37.917010 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 13:23:37.965007 In: serial Oct 3 13:23:37.977020 Out: serial Oct 3 13:23:37.977074 Err: serial Oct 3 13:23:37.977114 SCSI: ARNDALE SCSI INIT Oct 3 13:23:37.977156 Target spinup took 0 ms. Oct 3 13:23:37.977199 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 13:23:37.988985 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 13:23:37.989046 Net: Net Initialization Skipped Oct 3 13:23:38.000853 No ethernet found. Oct 3 13:23:38.001014 Hostname: arndale-westfield Oct 3 13:23:38.001081 Hit any key to stop autoboot: 2  1  0 Oct 3 13:23:39.928862 (Re)start USB... Oct 3 13:23:39.928862 USB0: USB EHCI 1.00 Oct 3 13:23:39.928862 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 13:23:45.528904 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 13:23:45.528904 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 13:23:45.972854 Waiting for Ethernet connection... done. Oct 3 13:23:47.628883 BOOTP broadcast 1 Oct 3 13:23:47.628883 BOOTP broadcast 2 Oct 3 13:23:50.900881 DHCP client bound to address 10.149.64.45 (3413 ms) Oct 3 13:23:50.914164 Using asx0 device Oct 3 13:23:50.917517 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 13:23:50.917573 Filename 'pxelinux.0'. Oct 3 13:23:50.917581 Load address: 0x43e00000 Oct 3 13:23:50.917581 Loading: *### Oct 3 13:23:50.936899 2.5 MiB/s Oct 3 13:23:50.936899 done Oct 3 13:23:50.936899 Bytes transferred = 42430 (a5be hex) Oct 3 13:23:50.936899 missing environment variable: pxeuuid Oct 3 13:23:50.936899 Retrieving file: pxelinux.cfg/0A95402D Oct 3 13:23:50.948880 Using asx0 device Oct 3 13:23:50.948880 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 13:23:50.948880 Filename 'pxelinux.cfg/0A95402D'. Oct 3 13:23:50.948880 Load address: 0x51000000 Oct 3 13:23:50.960917 Loading: *# Oct 3 13:23:50.960917 31.3 KiB/s Oct 3 13:23:50.960917 done Oct 3 13:23:50.960917 Bytes transferred = 65 (41 hex) Oct 3 13:23:50.960917 Config file found Oct 3 13:23:50.960917 Ignoring unknown command: serial Oct 3 13:23:50.972133 1: local Oct 3 13:23:50.972133 scanning bus for devices... Oct 3 13:23:50.972133 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 13:23:50.996922 Type: Hard Disk Oct 3 13:23:50.996922 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 13:23:50.996922 Found 1 device(s). Oct 3 13:23:50.996922 Oct 3 13:23:50.996922 SCSI device 0: Oct 3 13:23:51.009087 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 13:23:51.009167 Type: Hard Disk Oct 3 13:23:51.009210 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 13:23:51.020988 ... is now current device Oct 3 13:23:51.021046 Scanning scsi 0... Oct 3 13:23:51.021089 Found U-Boot script /boot.scr Oct 3 13:23:51.200861 1742 bytes read in 38 ms (43.9 KiB/s) Oct 3 13:23:51.248871 ## Executing script at 50000000 Oct 3 13:23:51.248871 Loading dtbs/6.1.112+/exynos5250-arndale.dtb Oct 3 13:23:51.248871 46686 bytes read in 905 ms (49.8 KiB/s) Oct 3 13:23:52.140894 1081360 bytes read in 124 ms (8.3 MiB/s) Oct 3 13:23:52.285039 Loaded xen-4.20-unstable to 0x41000000 (108010) Oct 3 13:23:52.296957 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan Oct 3 13:23:52.297036 10039808 bytes read in 539 ms (17.8 MiB/s) Oct 3 13:23:52.836859 Loaded vmlinuz-6.1.112+ to 0x42000000 (993200) Oct 3 13:23:52.848870 command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 13:23:52.859158 12059091 bytes read in 635 ms (18.1 MiB/s) Oct 3 13:23:53.496960 Loaded initrd.img-6.1.112+ to 0x43300000 (b801d3) Oct 3 13:23:53.508936 chosen { Oct 3 13:23:53.508985 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan"; Oct 3 13:23:53.520952 #size-cells = <0x00000001>; Oct 3 13:23:53.521005 #address-cells = <0x00000001>; Oct 3 13:23:53.521050 stdout-path = "serial2:115200n8"; Oct 3 13:23:53.533018 module@1 { Oct 3 13:23:53.533071 reg = <0x43300000 0x00b801d3>; Oct 3 13:23:53.533118 compatible = "xen,linux-initrd", "xen,multiboot-module"; Oct 3 13:23:53.533168 }; Oct 3 13:23:53.533206 module@0 { Oct 3 13:23:53.533278 bootargs = "ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Oct 3 13:23:53.556533 reg = <0x42000000 0x00993200>; Oct 3 13:23:53.556533 compatible = "xen,linux-zimage", "xen,multiboot-module"; Oct 3 13:23:53.557242 }; Oct 3 13:23:53.557242 }; Oct 3 13:23:53.568329 Booting 0x41000000 - 0x43000000 Oct 3 13:23:53.568329 Kernel image @ 0x41000000 [ 0x000000 - 0x144000 ] Oct 3 13:23:53.568329 ## Flattened Device Tree blob at 43000000 Oct 3 13:23:53.568329 Booting using the fdt blob at 0x43000000 Oct 3 13:23:53.580363 reserving fdt memory region: addr=43000000 size=c000 Oct 3 13:23:53.580363 Loading Device Tree to 4fff1000, end 4fffffff ... OK Oct 3 13:23:53.592747 Oct 3 13:23:53.592747 Starting kernel ...(fake run for tracing) Oct 3 13:23:53.592747 Oct 3 13:23:53.592747 Oct 3 13:23:53.592747 Starting kernel ... Oct 3 13:23:53.604005 Oct 3 13:23:53.604005 __ __ _ _ ____ ___ _ _ _ Oct 3 13:23:53.652190 \ \/ /___ _ __ | || | |___ \ / _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Oct 3 13:23:53.652190 \ // _ \ '_ \ | || |_ __) | | | |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Oct 3 13:23:53.664584 / \ __/ | | | |__ _| / __/| |_| |__| |_| | | | \__ \ || (_| | |_) | | __/ Oct 3 13:23:53.676696 /_/\_\___|_| |_| |_|(_)_____|\___/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Oct 3 13:23:53.676696 Oct 3 13:23:53.676696 (XEN) Xen version 4.20-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Thu Oct 3 12:43:18 UTC 2024 Oct 3 13:23:53.688250 (XEN) Latest ChangeSet: Wed Oct 2 19:01:26 2024 +0100 git:444cb9350f-dirty Oct 3 13:23:53.697916 (XEN) build-id: 1b0e54249bfface817b2879e456b0edc5287aa79 Oct 3 13:23:53.697916 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Oct 3 13:23:53.709911 (XEN) 32-bit Execution: Oct 3 13:23:53.709911 (XEN) Processor Features: 00001031:00011011 Oct 3 13:23:53.709911 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Oct 3 13:23:53.724508 (XEN) Extensions: GenericTimer Security Oct 3 13:23:53.724508 (XEN) Debug Features: 02010555 Oct 3 13:23:53.724508 (XEN) Auxiliary Features: 00000000 Oct 3 13:23:53.736417 (XEN) Memory Model Features: 10201105 20000000 Oct 3 13:23:53.736417 (XEN) 01240000 02102211 Oct 3 13:23:53.736417 (XEN) ISA Features: 02101110 13112111 21232041 Oct 3 13:23:53.748681 (XEN) 11112131 10011142 00000000 Oct 3 13:23:53.748681 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Oct 3 13:23:53.760701 (XEN) Set SYSRAM to 0000000041000070 (00200070) Oct 3 13:23:53.760701 (XEN) SMP: Allowing 2 CPUs Oct 3 13:23:53.760701 (XEN) enabled workaround for: ARM erratum 766422 Oct 3 13:23:53.772977 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Oct 3 13:23:53.773047 (XEN) GICv2 initialization: Oct 3 13:23:53.773091 (XEN) gic_dist_addr=0000000010481000 Oct 3 13:23:53.784953 (XEN) gic_cpu_addr=0000000010482000 Oct 3 13:23:53.785005 (XEN) gic_hyp_addr=0000000010484000 Oct 3 13:23:53.785051 (XEN) gic_vcpu_addr=0000000010486000 Oct 3 13:23:53.797050 (XEN) gic_maintenance_irq=25 Oct 3 13:23:53.797105 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Oct 3 13:23:53.797154 (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2) Oct 3 13:23:53.807075 (XEN) Initializing Credit2 scheduler Oct 3 13:23:53.809127 (XEN) load_precision_shift: 18 Oct 3 13:23:53.809217 (XEN) load_window_shift: 30 Oct 3 13:23:53.820580 (XEN) underload_balance_tolerance: 0 Oct 3 13:23:53.821050 (XEN) overload_balance_tolerance: -3 Oct 3 13:23:53.821050 (XEN) runqueues arrangement: socket Oct 3 13:23:53.821050 (XEN) cap enforcement granularity: 10ms Oct 3 13:23:53.832330 (XEN) load tracking window length 1073741824 ns Oct 3 13:23:53.832330 (XEN) Allocated console ring of 16 KiB. Oct 3 13:23:53.832330 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Oct 3 13:23:53.842559 (XEN) CPU0: Guest atomics will try 1 times before pausing the domain Oct 3 13:23:53.856678 (XEN) Bringing up CPU1 Oct 3 13:23:53.856678 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Oct 3 13:23:53.856678 (XEN) Brought up 2 CPUs Oct 3 13:23:53.856678 (XEN) CPU 1 booted. Oct 3 13:23:53.857240 (XEN) I/O virtualisation disabled Oct 3 13:23:53.868578 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Oct 3 13:23:53.868578 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Oct 3 13:23:53.879482 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Oct 3 13:23:53.879482 (XEN) Initializing Credit2 scheduler Oct 3 13:23:53.879482 (XEN) load_precision_shift: 18 Oct 3 13:23:53.892407 (XEN) load_window_shift: 30 Oct 3 13:23:53.892407 (XEN) underload_balance_tolerance: 0 Oct 3 13:23:53.892407 (XEN) overload_balance_tolerance: -3 Oct 3 13:23:53.892407 (XEN) runqueues arrangement: socket Oct 3 13:23:53.902757 (XEN) cap enforcement granularity: 10ms Oct 3 13:23:53.902757 (XEN) load tracking window length 1073741824 ns Oct 3 13:23:53.902757 (XEN) Adding cpu 0 to runqueue 0 Oct 3 13:23:53.913865 (XEN) First cpu on runqueue, activating Oct 3 13:23:53.913865 (XEN) Adding cpu 1 to runqueue 0 Oct 3 13:23:53.913865 (XEN) alternatives: Patching with alt table 002d2f0c -> 002d2fe4 Oct 3 13:23:53.928547 (XEN) CPU0 will execute ICIALLU on guest exit Oct 3 13:23:53.928547 (XEN) CPU1 will execute ICIALLU on guest exit Oct 3 13:23:53.928547 (XEN) *** LOADING DOMAIN 0 *** Oct 3 13:23:53.928547 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Oct 3 13:23:53.940975 (XEN) Loading ramdisk from boot module @ 0000000043300000 Oct 3 13:23:53.941040 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Oct 3 13:23:53.952881 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Oct 3 13:23:54.484691 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Oct 3 13:23:54.496931 (XEN) Allocating PPI 16 for event channel interrupt Oct 3 13:23:54.517776 (XEN) d0: extended regions not supported for 32-bit guests Oct 3 13:23:54.532426 (XEN) Loading zImage from 0000000042000000 to 0000000067600000-0000000067f93200 Oct 3 13:23:54.532426 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d801d3 Oct 3 13:23:54.625425 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b4c2 Oct 3 13:23:54.725012 (XEN) Initial low memory virq threshold set at 0x4000 pages. Oct 3 13:23:54.733751 (XEN) Scrubbing Free RAM in background Oct 3 13:23:54.733814 (XEN) Std. Loglevel: All Oct 3 13:23:54.733858 (XEN) Guest Loglevel: All Oct 3 13:23:54.733900 (XEN) *************************************************** Oct 3 13:23:54.745792 (XEN) WARNING: SILO mode is not enabled. Oct 3 13:23:54.745852 (XEN) It has implications on the security of the system, Oct 3 13:23:54.757758 (XEN) unless the communications have been forbidden between Oct 3 13:23:54.757821 (XEN) untrusted domains. Oct 3 13:23:54.757864 (XEN) *************************************************** Oct 3 13:23:54.769256 (XEN) 3... 2... 1... Oct 3 13:23:57.769013 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 13:23:57.780984 (XEN) Freed 356kB init memory. Oct 3 13:23:57.781042 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 13:23:58.836993 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Oct 3 13:23:58.860849 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Oct 3 13:23:58.860849 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Oct 3 13:23:58.872874 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Oct 3 13:23:58.872874 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 13:23:58.884798 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 13:23:58.920829 [ 0.000000] Linux version 6.1.112+ (osstest@himrod0) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Wed Oct 2 15:25:09 UTC 2024 Oct 3 13:23:58.944897 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 13:23:58.944897 [ 0.000000] CPU: div instructions available: patching division code Oct 3 13:23:58.956899 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 13:23:58.956899 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 13:23:58.968897 [ 0.000000] Memory policy: Data cache writealloc Oct 3 13:23:58.968897 [ 0.000000] Xen 4.20 support found Oct 3 13:23:58.981018 [ 0.000000] efi: UEFI not found. Oct 3 13:23:58.981084 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 Oct 3 13:23:58.981132 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 13:23:58.992897 [ 0.000000] Zone ranges: Oct 3 13:23:58.992897 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Oct 3 13:23:58.992897 [ 0.000000] Normal empty Oct 3 13:23:59.004896 [ 0.000000] HighMem empty Oct 3 13:23:59.004896 [ 0.000000] Movable zone start for each node Oct 3 13:23:59.004896 [ 0.000000] Early memory node ranges Oct 3 13:23:59.004896 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Oct 3 13:23:59.016936 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Oct 3 13:23:59.028904 [ 0.000000] psci: probing for conduit method from DT. Oct 3 13:23:59.028904 [ 0.000000] psci: PSCIv1.1 detected in firmware. Oct 3 13:23:59.028904 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Oct 3 13:23:59.041010 [ 0.000000] psci: Trusted OS migration not required Oct 3 13:23:59.041076 [ 0.000000] psci: SMC Calling Convention v1.2 Oct 3 13:23:59.052901 [ 0.000000] percpu: Embedded 16 pages/cpu s35412 r8192 d21932 u65536 Oct 3 13:23:59.052901 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 Oct 3 13:23:59.064849 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 13:23:59.076901 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 13:23:59.088846 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Oct 3 13:23:59.100844 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Oct 3 13:23:59.100844 [ 0.000000] Memory: 416844K/524288K available (14336K kernel code, 2180K rwdata, 5604K rodata, 2048K init, 438K bss, 41908K reserved, 65536K cma-reserved, 0K highmem) Oct 3 13:23:59.112847 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 13:23:59.124857 [ 0.000000] trace event string verifier disabled Oct 3 13:23:59.124857 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 13:23:59.136907 [ 0.000000] rcu: RCU event tracing is enabled. Oct 3 13:23:59.136907 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Oct 3 13:23:59.149014 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Oct 3 13:23:59.149089 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 13:23:59.160969 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 13:23:59.161004 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 13:23:59.173048 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 13:23:59.173110 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Oct 3 13:23:59.185036 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 13:23:59.196972 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 13:23:59.197011 [ 0.000012] Switching to timer-based delay loop, resolution 41ns Oct 3 13:23:59.208973 [ 0.000498] Console: colour dummy device 80x30 Oct 3 13:23:59.209005 [ 0.293140] printk: console [hvc0] enabled Oct 3 13:23:59.220964 [ 0.297330] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Oct 3 13:23:59.232878 [ 0.307733] CPU: Testing write buffer coherency: ok Oct 3 13:23:59.232912 [ 0.312675] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 13:23:59.244918 [ 0.322228] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 13:23:59.244954 [ 0.328642] pid_max: default: 32768 minimum: 301 Oct 3 13:23:59.256936 [ 0.333436] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 13:23:59.256974 [ 0.340709] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 13:23:59.269050 [ 0.349145] /cpus/cpu@0 missing clock-frequency property Oct 3 13:23:59.269112 [ 0.353911] /cpus/cpu@1 missing clock-frequency property Oct 3 13:23:59.280962 [ 0.359329] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 13:23:59.280997 [ 0.365815] xen:grant_table: Grant tables using version 1 layout Oct 3 13:23:59.292969 [ 0.371157] Grant table initialized Oct 3 13:23:59.293001 [ 0.374695] xen:events: Using FIFO-based ABI Oct 3 13:23:59.304962 [ 0.379014] Xen: initializing cpu0 Oct 3 13:23:59.304995 [ 0.382541] Setting up static identity map for 0x60300000 - 0x603000ac Oct 3 13:23:59.305023 [ 0.390294] rcu: Hierarchical SRCU implementation. Oct 3 13:23:59.316958 [ 0.393929] rcu: Max phase no-delay instances is 1000. Oct 3 13:23:59.316992 [ 0.402005] EFI services will not be available. Oct 3 13:23:59.328932 [ 0.405309] smp: Bringing up secondary CPUs ... Oct 3 13:23:59.328989 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 13:23:59.400895 [ 0.479768] Xen: initializing cpu1 Oct 3 13:23:59.400928 [ 0.479927] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 13:23:59.412852 [ 0.479956] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 13:23:59.412852 [ 0.498825] smp: Brought up 1 node, 2 CPUs Oct 3 13:23:59.424847 [ 0.502598] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 13:23:59.424847 [ 0.508909] CPU: All CPU(s) started in SVC mode. Oct 3 13:23:59.436814 [ 0.514316] devtmpfs: initialized Oct 3 13:23:59.436814 [ 0.526912] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 13:23:59.448837 [ 0.533398] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Oct 3 13:23:59.460846 [ 0.543123] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 13:23:59.472831 [ 0.551141] pinctrl core: initialized pinctrl subsystem Oct 3 13:23:59.472831 [ 0.557681] DMI not present or invalid. Oct 3 13:23:59.484847 [ 0.560783] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 13:23:59.484847 [ 0.567964] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 13:23:59.496835 [ 0.576756] thermal_sys: Registered thermal governor 'step_wise' Oct 3 13:23:59.496835 [ 0.576886] software IO TLB: area num 2. Oct 3 13:23:59.508843 [ 0.585573] software IO TLB: only able to allocate 8 MB Oct 3 13:23:59.508843 [ 0.592665] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Oct 3 13:23:59.520842 [ 0.597840] No ATAGs? Oct 3 13:23:59.520842 [ 0.600193] hw-breakpoint: Failed to enable monitor mode on CPU 0. Oct 3 13:23:59.520842 [ 0.608714] Serial: AMBA PL011 UART driver Oct 3 13:23:59.532803 [ 0.630872] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 62 Oct 3 13:23:59.556809 [ 0.680292] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 13:23:59.604789 [ 0.706164] xen:balloon: Initialising balloon driver Oct 3 13:23:59.628979 [ 0.713707] iommu: Default domain type: Translated Oct 3 13:23:59.640963 [ 0.717202] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 13:23:59.640998 [ 0.724156] SCSI subsystem initialized Oct 3 13:23:59.652957 [ 0.727711] usbcore: registered new interface driver usbfs Oct 3 13:23:59.652991 [ 0.732950] usbcore: registered new interface driver hub Oct 3 13:23:59.653018 [ 0.738346] usbcore: registered new device driver usb Oct 3 13:23:59.664962 [ 0.744969] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 13:23:59.664995 [ 0.748574] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 13:23:59.676967 [ 0.754889] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 13:23:59.688897 [ 0.763326] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 13:23:59.688937 [ 0.772466] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 13:23:59.700815 [ 0.777983] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 13:23:59.700815 [ 0.782671] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 13:23:59.712848 [ 0.788958] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 13:23:59.712848 [ 0.794151] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 13:23:59.712848 [ 0.798946] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 13:23:59.724896 [ 0.805046] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 13:23:59.724896 [ 0.810238] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 13:23:59.737007 [ 0.815132] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 13:23:59.737074 [ 0.821167] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 13:23:59.748899 [ 0.826937] pps_core: LinuxPPS API ver. 1 registered Oct 3 13:23:59.748899 [ 0.831374] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 13:23:59.760884 [ 0.840576] PTP clock support registered Oct 3 13:23:59.760884 [ 0.852346] EDAC MC: Ver: 3.0.0 Oct 3 13:23:59.772845 [ 0.862305] vgaarb: loaded Oct 3 13:23:59.784871 [ 0.867949] clocksource: Switched to clocksource arch_sys_counter Oct 3 13:23:59.796858 [ 0.879410] NET: Registered PF_INET protocol family Oct 3 13:23:59.796858 [ 0.883046] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Oct 3 13:23:59.808925 [ 0.890952] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 13:23:59.820989 [ 0.898650] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 13:23:59.821027 [ 0.906440] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Oct 3 13:23:59.833059 [ 0.914291] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Oct 3 13:23:59.845034 [ 0.921579] TCP: Hash tables configured (established 4096 bind 4096) Oct 3 13:23:59.845099 [ 0.927944] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 13:23:59.856968 [ 0.934486] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 13:23:59.857004 [ 0.941627] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 13:23:59.868887 [ 0.950989] RPC: Registered named UNIX socket transport module. Oct 3 13:23:59.880846 [ 0.955530] RPC: Registered udp transport module. Oct 3 13:23:59.880846 [ 0.960319] RPC: Registered tcp transport module. Oct 3 13:23:59.880846 [ 0.965077] RPC: Registered tcp NFSv4.1 backchannel transport module. Oct 3 13:23:59.892849 [ 0.971603] PCI: CLS 0 bytes, default 64 Oct 3 13:23:59.892849 [ 0.976888] Initialise system trusted keyrings Oct 3 13:23:59.904876 [ 0.980246] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Oct 3 13:23:59.904876 [ 0.991808] squashfs: version 4.0 (2009/01/31) Phillip Lougher Oct 3 13:23:59.916921 [ 0.996821] NFS: Registering the id_resolver key type Oct 3 13:23:59.916934 [ 1.001429] Key type id_resolver registered Oct 3 13:23:59.928903 [ 1.003054] Trying to unpack rootfs image as initramfs... Oct 3 13:23:59.928903 [ 1.005645] Key type id_legacy registered Oct 3 13:23:59.941002 [ 1.015293] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Oct 3 13:23:59.941075 [ 1.021981] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Oct 3 13:23:59.952836 [ 1.069262] Key type asymmetric registered Oct 3 13:23:59.988973 [ 1.071991] Asymmetric key parser 'x509' registered Oct 3 13:24:00.000969 [ 1.077057] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 13:24:00.001008 [ 1.084425] io scheduler mq-deadline registered Oct 3 13:24:00.012937 [ 1.089031] io scheduler kyber registered Oct 3 13:24:00.012970 [ 1.099116] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 13:24:00.025033 [ 1.184525] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 13:24:00.109061 [ 1.190758] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 13:24:00.120967 [ 1.219544] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 13:24:00.144904 [ 1.225767] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 13:24:00.156847 [ 1.262852] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 13:24:00.192839 [ 1.269112] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 13:24:00.192839 [ 1.303053] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 13:24:00.228847 [ 1.309320] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 13:24:00.240866 [ 1.347660] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 13:24:00.280776 [ 1.434471] xen:xen_evtchn: Event-channel device installed Oct 3 13:24:00.352811 [ 1.542508] Freeing initrd memory: 11780K Oct 3 13:24:00.460850 [ 1.615095] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 13:24:00.544875 [ 1.623760] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 113, base_baud = 0) is a S3C6400/10 Oct 3 13:24:00.556897 [ 1.631828] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 114, base_baud = 0) is a S3C6400/10 Oct 3 13:24:00.556897 [ 1.640819] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 115, base_baud = 0) is a S3C6400/10 Oct 3 13:24:00.568903 [ 1.650148] SuperH (H)SCI(F) driver initialized Oct 3 13:24:00.568903 [ 1.655056] STMicroelectronics ASC driver initialized Oct 3 13:24:00.580825 [ 1.660524] STM32 USART driver initialized Oct 3 13:24:00.580825 [ 1.668818] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 13:24:00.592820 [ 1.708314] brd: module loaded Oct 3 13:24:00.628805 [ 1.714174] loop: module loaded Oct 3 13:24:00.640780 [ 1.731282] Invalid max_queues (4), will use default max: 2. Oct 3 13:24:00.652799 [ 1.757893] tun: Universal TUN/TAP device driver, 1.6 Oct 3 13:24:00.676863 [ 1.761832] CAN device driver interface Oct 3 13:24:00.688831 [ 1.766920] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Oct 3 13:24:00.688831 [ 1.777384] xen_netfront: Initialising Xen virtual ethernet driver Oct 3 13:24:00.700842 [ 1.782313] pegasus: Pegasus/Pegasus II USB Ethernet driver Oct 3 13:24:00.712904 [ 1.787861] usbcore: registered new interface driver pegasus Oct 3 13:24:00.712904 [ 1.793606] usbcore: registered new interface driver asix Oct 3 13:24:00.724913 [ 1.799084] usbcore: registered new interface driver ax88179_178a Oct 3 13:24:00.724943 [ 1.805214] usbcore: registered new interface driver cdc_ether Oct 3 13:24:00.736847 [ 1.811137] usbcore: registered new interface driver smsc75xx Oct 3 13:24:00.736847 [ 1.816940] usbcore: registered new interface driver smsc95xx Oct 3 13:24:00.736847 [ 1.822767] usbcore: registered new interface driver net1080 Oct 3 13:24:00.748901 [ 1.828495] usbcore: registered new interface driver cdc_subset Oct 3 13:24:00.748901 [ 1.834464] usbcore: registered new interface driver zaurus Oct 3 13:24:00.761025 [ 1.840127] usbcore: registered new interface driver cdc_ncm Oct 3 13:24:00.761092 [ 1.849417] usbcore: registered new interface driver usb-storage Oct 3 13:24:00.772988 [ 1.883836] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 13:24:00.808968 [ 1.892645] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T13:24:02 UTC (1727961842) Oct 3 13:24:00.820876 [ 1.901194] i2c_dev: i2c /dev entries driver Oct 3 13:24:00.820876 [ 1.911472] syscon-poweroff 10040000.system-controller:syscon-poweroff: pm_power_off already claimed for psci_sys_poweroff Oct 3 13:24:00.844844 [ 1.921171] syscon-poweroff: probe of 10040000.system-controller:syscon-poweroff failed with error -16 Oct 3 13:24:00.844844 [ 1.932398] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 13:24:00.856878 [ 1.943197] device-mapper: uevent: version 1.0.3 Oct 3 13:24:00.868897 [ 1.946659] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Oct 3 13:24:00.868897 [ 1.955649] cpu cpu0: OPP table can't be empty Oct 3 13:24:00.880843 [ 1.960658] failed to register cpuidle driver Oct 3 13:24:00.880843 [ 1.963887] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Oct 3 13:24:00.892846 [ 1.972161] sdhci: Secure Digital Host Controller Interface driver Oct 3 13:24:00.892846 [ 1.977252] sdhci: Copyright(c) Pierre Ossman Oct 3 13:24:00.904813 [ 1.985243] sdhci-pltfm: SDHCI platform and OF driver helper Oct 3 13:24:00.904813 [ 1.992912] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 13:24:00.916892 [ 1.998290] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Oct 3 13:24:00.928893 [ 2.004819] usbcore: registered new interface driver usbhid Oct 3 13:24:00.928893 [ 2.009738] usbhid: USB HID core driver Oct 3 13:24:00.928893 [ 2.020532] NET: Registered PF_INET6 protocol family Oct 3 13:24:00.940819 [ 2.025119] Segment Routing with IPv6 Oct 3 13:24:00.952849 [ 2.027893] In-situ OAM (IOAM) with IPv6 Oct 3 13:24:00.952849 [ 2.031963] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Oct 3 13:24:00.952849 [ 2.038368] NET: Registered PF_PACKET protocol family Oct 3 13:24:00.964849 [ 2.042980] can: controller area network core Oct 3 13:24:00.964849 [ 2.047429] NET: Registered PF_CAN protocol family Oct 3 13:24:00.976880 [ 2.052290] can: raw protocol Oct 3 13:24:00.976880 [ 2.055289] can: broadcast manager protocol Oct 3 13:24:00.976880 [ 2.059594] can: netlink gateway - max_hops=1 Oct 3 13:24:00.988897 [ 2.064192] Key type dns_resolver registered Oct 3 13:24:00.988897 [ 2.068964] ThumbEE CPU extension supported. Oct 3 13:24:00.988897 [ 2.072654] Registering SWP/SWPB emulation handler Oct 3 13:24:01.000874 [ 2.078025] Loading compiled-in X.509 certificates Oct 3 13:24:01.000874 [ 2.106378] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 13:24:01.036882 [ 2.112494] clk: Not disabling unused clocks Oct 3 13:24:01.036882 [ 2.119580] Freeing unused kernel image (initmem) memory: 2048K Oct 3 13:24:01.048803 [ 2.125698] Run /init as init process Oct 3 13:24:01.048803 Loading, please wait... Oct 3 13:24:01.072834 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 13:24:01.144801 [ 3.592378] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 13:24:02.516875 [ 3.643646] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 13:24:02.576819 [ 3.656805] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 13:24:02.588833 [ 3.668197] phy phy-12130000.phy.9: phy_power_on was called before phy_init Oct 3 13:24:02.588833 [ 3.673801] exynos-ohci 12120000.usb: USB Host Controller Oct 3 13:24:02.600853 [ 3.679309] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Oct 3 13:24:02.600853 [ 3.689541] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 Oct 3 13:24:02.612808 [ 3.733280] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 13:24:02.660880 [ 3.743151] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 13:24:02.672878 [ 3.753667] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 13:24:02.684785 [ 3.775610] Synopsys Designware Multimedia Card Interface Driver Oct 3 13:24:02.696809 [ 3.784764] hub 1-0:1.0: USB hub found Oct 3 13:24:02.708846 [ 3.785148] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 13:24:02.708846 [ 3.792943] hub 1-0:1.0: 3 ports detected Oct 3 13:24:02.720795 [ 3.802097] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 13:24:02.732781 [ 3.802153] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 13:24:02.732781 [ 3.808410] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 13:24:02.744847 [ 3.821721] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Oct 3 13:24:02.744847 [ 3.830665] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 13:24:02.756816 [ 3.849729] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 13:24:02.768812 [ 3.854815] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 13:24:02.780849 [ 3.860379] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo Oct 3 13:24:02.792871 [ 3.870856] mmc_host mmc0: card is polling. Oct 3 13:24:02.792871 [ 3.872364] phy phy-12130000.phy.9: phy_power_on was called before phy_init Oct 3 13:24:02.804900 [ 3.881174] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 13:24:02.804900 [ 3.886672] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Oct 3 13:24:02.816844 [ 3.909359] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 13:24:02.828818 [ 3.914445] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 13:24:02.840903 [ 3.919992] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 127,32 bit host data width,128 deep fifo Oct 3 13:24:02.852847 [ 3.928028] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 13:24:02.852847 [ 3.951449] scsi host0: ahci-dwc Oct 3 13:24:02.876868 [ 3.959292] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 128 Oct 3 13:24:02.888884 [ 3.966583] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 Oct 3 13:24:02.888884 [ 3.998236] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 13:24:02.924824 [ 4.014669] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 13:24:02.936816 [ 4.034533] hub 2-0:1.0: USB hub found Oct 3 13:24:02.960865 [ 4.039527] hub 2-0:1.0: 3 ports detected Oct 3 13:24:02.960865 [ 4.063364] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Oct 3 13:24:02.984857 [ 4.073376] s3c-rtc 101e0000.rtc: registered as rtc1 Oct 3 13:24:02.996886 [ 4.075137] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 13:24:03.008824 [ 4.091935] mmc0: new DDR MMC card at address 0001 Oct 3 13:24:03.020820 [ 4.098316] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Oct 3 13:24:03.020820 [ 4.106228] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 13:24:03.032827 [ 4.123461] mmc1: new high speed SDHC card at address aaaa Oct 3 13:24:03.044884 [ 4.127795] mmcblk0: p1 p2 p3 p4 Oct 3 13:24:03.044884 [ 4.148976] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Oct 3 13:24:03.068805 [ 4.155174] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Oct 3 13:24:03.080849 [ 4.166826] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Oct 3 13:24:03.092815 [ 4.174937] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Oct 3 13:24:03.104781 [ 4.467995] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 13:24:03.392880 [ 4.475716] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 13:24:03.404896 [ 4.481115] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 13:24:03.404896 [ 4.488857] ata1.00: configured for UDMA/133 Oct 3 13:24:03.417032 [ 4.492523] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 13:24:03.417116 [ 4.501829] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 13:24:03.428903 [ 4.507986] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 13:24:03.428903 [ 4.513500] sd 0:0:0:0: [sda] Write Protect is off Oct 3 13:24:03.440913 [ 4.518208] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 13:24:03.452966 [ 4.527288] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 13:24:03.453043 [ 4.553407] sda: sda1 sda2 < sda5 > Oct 3 13:24:03.476886 [ 4.556399] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 13:24:03.476886 [ 4.564726] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 13:24:03.488855 [ 4.588109] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Oct 3 13:24:03.512868 [ 4.600040] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 13:24:03.524998 [ 4.608848] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 13:24:03.536974 [ 4.647564] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 13:24:03.572912 [ 4.656057] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Oct 3 13:24:03.584902 [ 4.661970] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 13:24:03.584902 [ 4.667237] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 13:24:03.596902 [ 4.674979] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 13:24:03.596902 [ 4.682420] hub 3-0:1.0: USB hub found Oct 3 13:24:03.608902 [ 4.685573] hub 3-0:1.0: 1 port detected Oct 3 13:24:03.608902 [ 4.690300] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 13:24:03.620871 [ 4.703908] hub 4-0:1.0: USB hub found Oct 3 13:24:03.620871 [ 4.706372] hub 4-0:1.0: 1 port detected Oct 3 13:24:03.632821 [ 4.733654] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 13:24:03.656881 [ 4.810075] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 13:24:03.740841 [ 4.918920] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 13:24:03.848862 [ 5.027036] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 13:24:03.956858 [ 5.135118] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 13:24:04.064855 [ 5.243187] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 13:24:04.172871 [ 5.351253] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 13:24:04.280855 [ 5.459327] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 13:24:04.392833 [ 5.567378] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 13:24:04.500934 [ 5.675441] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 13:24:04.608830 [ 6.084150] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 13:24:05.016827 [ 6.191867] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 13:24:05.124823 [ 6.800199] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 13:24:05.724874 [ 7.187940] random: crng init done Oct 3 13:24:06.108855 Begin: Loading essential drivers ... done. Oct 3 13:24:06.660829 Begin: Running /scripts/init-premount ... done. Oct 3 13:24:09.673777 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 13:24:09.685720 Begin: Running /scripts/local-premount ... done. Oct 3 13:24:09.697681 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 13:24:09.745667 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 13:24:09.829714 /dev/mapper/arndale--westfield--vg-root: clean, 46037/1220608 files, 606548/4882432 blocks Oct 3 13:24:10.036844 done. Oct 3 13:24:10.036844 [ 11.125337] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 13:24:10.048877 [ 11.471391] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 13:24:10.396990 done. Oct 3 13:24:10.397044 Begin: Running /scripts/local-bottom ... done. Oct 3 13:24:10.444872 Begin: Running /scripts/init-bottom ... done. Oct 3 13:24:10.492882 INIT: version 3.06 booting Oct 3 13:24:10.972861 INIT: No inittab.d directory found Oct 3 13:24:11.032850 Using makefile-style concurrent boot in runlevel S. Oct 3 13:24:11.356851 Starting hotplug events dispatcher: systemd-udevd. Oct 3 13:24:13.009710 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 13:24:13.453745 Synthesizing the initial hotplug events (devices)...[ 14.736839] wm8994 3-001a: Device is not a WM8994, ID is 0 Oct 3 13:24:13.657733 [ 14.751141] wm8994: probe of 3-001a failed with error -22 Oct 3 13:24:13.669735 done. Oct 3 13:24:14.281693 Waiting for /dev to be fully populated...[ 15.448401] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Oct 3 13:24:14.377705 [ 15.461668] s5p-secss 10830000.sss: s5p-sss driver registered Oct 3 13:24:14.377769 [ 15.468463] mc: Linux media interface: v0.10 Oct 3 13:24:14.389718 [ 15.569933] videodev: Linux video capture interface: v2.00 Oct 3 13:24:14.485729 [ 15.777752] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 13:24:14.701757 [ 15.850721] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 13:24:14.773754 [ 15.863335] s5p-mfc 11000000.codec: Adding to iommu group 0 Oct 3 13:24:14.785743 [ 15.873146] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Oct 3 13:24:14.797743 [ 15.915096] exynos-gsc 13e00000.gsc: Adding to iommu group 1 Oct 3 13:24:14.833749 [ 15.921775] exynos-gsc 13e10000.gsc: Adding to iommu group 2 Oct 3 13:24:14.845758 [ 15.927256] exynos-gsc 13e20000.gsc: Adding to iommu group 3 Oct 3 13:24:14.845820 [ 15.932756] exynos-gsc 13e30000.gsc: Adding to iommu group 4 Oct 3 13:24:14.857697 [ 15.959538] blk_print_req_error: 6 callbacks suppressed Oct 3 13:24:14.881762 [ 15.959548] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 13:24:14.893694 [ 15.982311] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 13:24:14.905753 [ 15.992673] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 13:24:14.917773 [ 16.000924] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 13:24:14.929793 [ 16.012586] s5p-mfc 11000000.codec: decoder registered as /dev/video4 Oct 3 13:24:14.929857 [ 16.018239] s5p-mfc 11000000.codec: encoder registered as /dev/video5 Oct 3 13:24:14.941716 [ 16.078077] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 13:24:15.001695 [ 16.108716] usb3503 usb-hub: switched to HUB mode Oct 3 13:24:15.025692 [ 16.112063] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 13:24:15.037652 [ 16.186196] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 13:24:15.109683 [ 16.294515] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 13:24:15.217687 [ 16.381611] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Oct 3 13:24:15.301700 [ 16.419038] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 13:24:15.337715 [ 16.487980] usb 2-3: new high-speed USB device number 2 using exynos-ehci Oct 3 13:24:15.409677 [ 16.527164] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 13:24:15.445734 [ 16.635361] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 13:24:15.565631 [ 16.708581] hub 2-3:1.0: USB hub found Oct 3 13:24:15.625689 [ 16.711937] hub 2-3:1.0: 3 ports detected Oct 3 13:24:15.625752 [ 16.743489] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 13:24:15.673634 [ 16.819684] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 13:24:15.745705 [ 16.827375] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 13:24:15.757726 [ 16.836118] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 13:24:15.757779 [ 16.848166] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 13:24:15.769771 [ 16.855897] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 13:24:15.781805 [ 16.864618] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 13:24:15.793709 [ 17.058051] usb 2-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 13:24:15.985688 [ 17.176224] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 13:24:16.105687 [ 17.230708] hub 2-3.2:1.0: USB hub found Oct 3 13:24:16.153721 [ 17.233712] hub 2-3.2:1.0: 4 ports detected Oct 3 13:24:16.153781 [ 17.282485] usbcore: registered new device driver onboard-usb-hub Oct 3 13:24:16.201765 [ 17.284015] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 13:24:16.213719 [ 17.408713] hub 2-3.2:1.0: USB hub found Oct 3 13:24:16.333718 [ 17.411725] hub 2-3.2:1.0: 4 ports detected Oct 3 13:24:16.333781 [ 17.423683] hub 2-3.2:1.0: USB hub found Oct 3 13:24:16.345728 [ 17.426666] hub 2-3.2:1.0: 4 ports detected Oct 3 13:24:16.345800 [ 17.747976] usb 2-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 13:24:16.669772 [ 17.897117] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 13:24:16.825734 [ 17.908664] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 13:24:16.837700 done. Oct 3 13:24:16.837753 [ 18.264433] EXT4-fs (dm-0): re-mounted. Quota mode: disabled. Oct 3 13:24:17.185736 [ 18.589916] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 13:24:17.521745 [ 18.604155] Asix Electronics AX88772A usb-002:004:10: attached PHY driver (mii_bus:phy_addr=usb-002:004:10, irq=POLL) Oct 3 13:24:17.533796 [ 18.614125] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 02:20:24:aa:77:08 Oct 3 13:24:17.545699 Checking file systems.../dev/sda1: clean, 2105/61056 files, 43349/243968 blocks Oct 3 13:24:18.829694 done. Oct 3 13:24:18.865696 Cleaning up temporary files... /tmp. Oct 3 13:24:19.093722 [ 20.388881] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 13:24:19.309755 [ 20.437742] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 13:24:19.357754 [ 20.533054] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k Oct 3 13:24:19.453788 Mounting local filesystems...done. Oct 3 13:24:19.693670 Activating swapfile swap, if any...done. Oct 3 13:24:19.705693 Cleaning up temporary files.... Oct 3 13:24:19.741707 Starting Setting kernel variables: sysctl. Oct 3 13:24:19.913718 [ 22.369170] xenbr0: port 1(eth0) entered blocking state Oct 3 13:24:21.293778 [ 22.373025] xenbr0: port 1(eth0) entered disabled state Oct 3 13:24:21.293849 [ 22.378516] device eth0 entered promiscuous mode Oct 3 13:24:21.293898 [ 22.388402] asix 2-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 13:24:21.305738 Configuring network interfaces...RTNETLINK answers: Operation not supported Oct 3 13:24:23.105769 Oct 3 13:24:23.117688 Waiting for xenbr0 to get ready (MAXWAIT is 2 seconds). Oct 3 13:24:23.117723 [ 24.575162] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 13:24:23.501768 [ 24.581161] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 3 13:24:23.501833 [ 24.587498] xenbr0: port 1(eth0) entered blocking state Oct 3 13:24:23.513755 [ 24.592776] xenbr0: port 1(eth0) entered forwarding state Oct 3 13:24:23.513826 [ 24.598615] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready Oct 3 13:24:23.525729 done. Oct 3 13:24:23.729688 Cleaning up temporary files.... Oct 3 13:24:23.789702 Starting nftables: nonemnl.c:60: Unable to initialize Netlink socket: Protocol not supported Oct 3 13:24:24.017782 failed! Oct 3 13:24:24.034757 Setting up X socket directories... Oct 3 13:24:24.034927 /tmp/.X11-unix Oct 3 13:24:24.034954 /tmp/.ICE-unix Oct 3 13:24:24.041702 . Oct 3 13:24:24.041754 startpar: service(s) returned failure: nftables ... failed! Oct 3 13:24:24.053699 INIT: Entering runlevel: 2 Oct 3 13:24:24.065710 Using makefile-style concurrent boot in runlevel 2. Oct 3 13:24:24.089682 Starting Apache httpd web server: apache2AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.149.64.45. Set the 'ServerName' directive globally to suppress this message Oct 3 13:24:24.917765 . Oct 3 13:24:25.985688 Starting NTP server: ntpd2024-10-03T13:24:28 ntpd[1147]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 13:24:26.333767 2024-10-03T13:24:28 ntpd[1147]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 13:24:26.345775 . Oct 3 13:24:26.345825 Starting SMP IRQ Balancer: irqbalance. Oct 3 13:24:26.805716 Starting system message bus: dbus. Oct 3 13:24:27.297739 Starting OpenBSD Secure Shell server: sshd. Oct 3 13:24:27.645644 Starting /usr/local/sbin/xenstored.... Oct 3 13:24:30.837749 Setting domain 0 name, domid and JSON config... Oct 3 13:24:30.837810 Done setting up Dom0 Oct 3 13:24:30.849718 Starting xenconsoled... Oct 3 13:24:30.849774 Starting QEMU as disk backend for dom0 Oct 3 13:24:30.849820 Oct 3 13:24:32.173705 Debian GNU/Linux 12 arndale-westfield hvc0 Oct 3 13:24:32.173812 Oct 3 13:24:32.173850 arndale-westfield login: [ 116.185030] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 13:25:55.105708 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 13:26:11.225814 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 13:32:52.581768 [ 632.851803] EXT4-fs (dm-3): unmounting filesystem. Oct 3 13:34:31.769774 [ 639.665780] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 13:34:38.585800 [ 644.734536] EXT4-fs (dm-3): unmounting filesystem. Oct 3 13:34:43.653716 [ 659.900664] xenbr0: port 2(vif1.0) entered blocking state Oct 3 13:34:58.821736 [ 659.904700] xenbr0: port 2(vif1.0) entered disabled state Oct 3 13:34:58.821792 [ 659.910382] device vif1.0 entered promiscuous mode Oct 3 13:34:58.833602 (XEN) d1v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 13:34:59.941639 (XEN) d1v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 13:34:59.957593 [ 661.882768] xen-blkback: backend/vbd/1/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 13:35:00.801755 [ 661.984196] xen-blkback: backend/vbd/1/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 13:35:00.909617 (XEN) common/grant_table.c:1909:d1v0 Expanding d1 grant table from 1 to 2 frames Oct 3 13:35:00.933586 [ 662.167680] vif vif-1-0 vif1.0: Guest Rx ready Oct 3 13:35:01.089670 [ 662.174470] IPv6: ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready Oct 3 13:35:01.089708 [ 662.179749] xenbr0: port 2(vif1.0) entered blocking state Oct 3 13:35:01.101654 [ 662.185047] xenbr0: port 2(vif1.0) entered forwarding state Oct 3 13:35:01.101690 (XEN) gnttab_mark_dirty not implemented yet Oct 3 13:35:01.137625 [ 708.957826] xenbr0: port 2(vif1.0) entered disabled state Oct 3 13:35:47.865758 [ 709.118553] xenbr0: port 2(vif1.0) entered disabled state Oct 3 13:35:48.033768 [ 709.123582] device vif1.0 left promiscuous mode Oct 3 13:35:48.033830 [ 709.127220] xenbr0: port 2(vif1.0) entered disabled state Oct 3 13:35:48.045704 [ 736.826255] xenbr0: port 2(vif2.0) entered blocking state Oct 3 13:36:15.745754 [ 736.830351] xenbr0: port 2(vif2.0) entered disabled state Oct 3 13:36:15.745863 [ 736.835924] device vif2.0 entered promiscuous mode Oct 3 13:36:15.757685 (XEN) d2v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 13:36:16.825708 (XEN) d2v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 13:36:16.837689 [ 738.803231] xen-blkback: backend/vbd/2/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 13:36:17.725735 [ 738.870352] xen-blkback: backend/vbd/2/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 13:36:17.785719 (XEN) common/grant_table.c:1909:d2v0 Expanding d2 grant table from 1 to 2 frames Oct 3 13:36:17.833722 [ 739.169428] vif vif-2-0 vif2.0: Guest Rx ready Oct 3 13:36:18.085697 [ 739.175481] IPv6: ADDRCONF(NETDEV_CHANGE): vif2.0: link becomes ready Oct 3 13:36:18.097764 [ 739.180993] xenbr0: port 2(vif2.0) entered blocking state Oct 3 13:36:18.097828 [ 739.186414] xenbr0: port 2(vif2.0) entered forwarding state Oct 3 13:36:18.109675 [ 781.361085] xenbr0: port 2(vif2.0) entered disabled state Oct 3 13:37:00.277031 [ 781.548591] xenbr0: port 2(vif2.0) entered disabled state Oct 3 13:37:00.469060 [ 781.553408] device vif2.0 left promiscuous mode Oct 3 13:37:00.469122 [ 781.557259] xenbr0: port 2(vif2.0) entered disabled state Oct 3 13:37:00.480965 [ 808.343961] xenbr0: port 2(vif3.0) entered blocking state Oct 3 13:37:27.265775 [ 808.348053] xenbr0: port 2(vif3.0) entered disabled state Oct 3 13:37:27.265852 [ 808.353647] device vif3.0 entered promiscuous mode Oct 3 13:37:27.265901 (XEN) d3v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 13:37:28.357723 (XEN) d3v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 13:37:28.369725 [ 810.371799] xen-blkback: backend/vbd/3/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 13:37:29.293706 [ 810.475065] xen-blkback: backend/vbd/3/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 13:37:29.389758 (XEN) common/grant_table.c:1909:d3v0 Expanding d3 grant table from 1 to 2 frames Oct 3 13:37:29.449719 [ 810.673578] vif vif-3-0 vif3.0: Guest Rx ready Oct 3 13:37:29.593750 [ 810.677334] IPv6: ADDRCONF(NETDEV_CHANGE): vif3.0: link becomes ready Oct 3 13:37:29.593817 [ 810.684008] xenbr0: port 2(vif3.0) entered blocking state Oct 3 13:37:29.605705 [ 810.689380] xenbr0: port 2(vif3.0) entered forwarding state Oct 3 13:37:29.605769 [ 852.964811] xenbr0: port 2(vif3.0) entered disabled state Oct 3 13:38:11.881689 [ 853.158585] xenbr0: port 2(vif3.0) entered disabled state Oct 3 13:38:12.073818 [ 853.163293] device vif3.0 left promiscuous mode Oct 3 13:38:12.073919 [ 853.167312] xenbr0: port 2(vif3.0) entered disabled state Oct 3 13:38:12.085706 [ 879.964949] xenbr0: port 2(vif4.0) entered blocking state Oct 3 13:38:38.877817 [ 879.969018] xenbr0: port 2(vif4.0) entered disabled state Oct 3 13:38:38.877896 [ 879.974653] device vif4.0 entered promiscuous mode Oct 3 13:38:38.889718 (XEN) d4v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 13:38:39.957732 (XEN) d4v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 13:38:39.969731 [ 881.573295] xen-blkback: backend/vbd/4/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 13:38:40.485763 [ 881.631331] xen-blkback: backend/vbd/4/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 13:38:40.545740 (XEN) common/grant_table.c:1909:d4v0 Expanding d4 grant table from 1 to 2 frames Oct 3 13:38:40.617692 [ 881.864469] vif vif-4-0 vif4.0: Guest Rx ready Oct 3 13:38:40.773755 [ 881.867701] IPv6: ADDRCONF(NETDEV_CHANGE): vif4.0: link becomes ready Oct 3 13:38:40.785778 [ 881.874274] xenbr0: port 2(vif4.0) entered blocking state Oct 3 13:38:40.785842 [ 881.879586] xenbr0: port 2(vif4.0) entered forwarding state Oct 3 13:38:40.797699 [ 924.490222] xenbr0: port 2(vif4.0) entered disabled state Oct 3 13:39:23.401831 [ 924.709697] xenbr0: port 2(vif4.0) entered disabled state Oct 3 13:39:23.629777 [ 924.714547] device vif4.0 left promiscuous mode Oct 3 13:39:23.629876 [ 924.718406] xenbr0: port 2(vif4.0) entered disabled state Oct 3 13:39:23.629929 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 13:39:33.289669 [ 951.510986] xenbr0: port 2(vif5.0) entered blocking state Oct 3 13:39:50.429816 [ 951.515019] xenbr0: port 2(vif5.0) entered disabled state Oct 3 13:39:50.429901 [ 951.520716] device vif5.0 entered promiscuous mode Oct 3 13:39:50.441713 (XEN) d5v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 13:39:51.509746 (XEN) d5v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 13:39:51.521680 [ 953.427223] xen-blkback: backend/vbd/5/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 13:39:52.349673 [ 953.464452] xen-blkback: backend/vbd/5/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 13:39:52.385742 (XEN) common/grant_table.c:1909:d5v0 Expanding d5 grant table from 1 to 2 frames Oct 3 13:39:52.421698 [ 953.589294] vif vif-5-0 vif5.0: Guest Rx ready Oct 3 13:39:52.505765 [ 953.593014] IPv6: ADDRCONF(NETDEV_CHANGE): vif5.0: link becomes ready Oct 3 13:39:52.505836 [ 953.599164] xenbr0: port 2(vif5.0) entered blocking state Oct 3 13:39:52.517763 [ 953.604385] xenbr0: port 2(vif5.0) entered forwarding state Oct 3 13:39:52.517826 [ 996.115734] xenbr0: port 2(vif5.0) entered disabled state Oct 3 13:40:35.025687 [ 996.268435] xenbr0: port 2(vif5.0) entered disabled state Oct 3 13:40:35.181654 [ 996.272862] device vif5.0 left promiscuous mode Oct 3 13:40:35.181716 [ 996.277129] xenbr0: port 2(vif5.0) entered disabled state Oct 3 13:40:35.193619 [ 1023.204869] xenbr0: port 2(vif6.0) entered blocking state Oct 3 13:41:02.117082 [ 1023.208963] xenbr0: port 2(vif6.0) entered disabled state Oct 3 13:41:02.128909 [ 1023.214546] device vif6.0 entered promiscuous mode Oct 3 13:41:02.128944 (XEN) d6v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 13:41:03.212942 (XEN) d6v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 13:41:03.225004 [ 1024.860458] xen-blkback: backend/vbd/6/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 13:41:03.776994 [ 1024.917135] xen-blkback: backend/vbd/6/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 13:41:03.836978 (XEN) common/grant_table.c:1909:d6v0 Expanding d6 grant table from 1 to 2 frames Oct 3 13:41:03.872989 [ 1025.108404] vif vif-6-0 vif6.0: Guest Rx ready Oct 3 13:41:04.016983 [ 1025.111874] IPv6: ADDRCONF(NETDEV_CHANGE): vif6.0: link becomes ready Oct 3 13:41:04.029016 [ 1025.118205] xenbr0: port 2(vif6.0) entered blocking state Oct 3 13:41:04.029080 [ 1025.123515] xenbr0: port 2(vif6.0) entered forwarding state Oct 3 13:41:04.040983 [ 1067.675354] xenbr0: port 2(vif6.0) entered disabled state Oct 3 13:41:46.593723 [ 1067.838424] xenbr0: port 2(vif6.0) entered disabled state Oct 3 13:41:46.749639 [ 1067.842896] device vif6.0 left promiscuous mode Oct 3 13:41:46.761607 [ 1067.847068] xenbr0: port 2(vif6.0) entered disabled state Oct 3 13:41:46.761642 [ 1094.655144] xenbr0: port 2(vif7.0) entered blocking state Oct 3 13:42:13.568919 [ 1094.659225] xenbr0: port 2(vif7.0) entered disabled state Oct 3 13:42:13.568919 [ 1094.664810] device vif7.0 entered promiscuous mode Oct 3 13:42:13.580905 (XEN) d7v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 13:42:14.661060 (XEN) d7v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 13:42:14.673011 [ 1096.598267] xen-blkback: backend/vbd/7/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 13:42:15.513028 [ 1096.654783] xen-blkback: backend/vbd/7/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 13:42:15.572873 (XEN) common/grant_table.c:1909:d7v0 Expanding d7 grant table from 1 to 2 frames Oct 3 13:42:15.620867 [ 1096.816464] vif vif-7-0 vif7.0: Guest Rx ready Oct 3 13:42:15.729038 [ 1096.819631] IPv6: ADDRCONF(NETDEV_CHANGE): vif7.0: link becomes ready Oct 3 13:42:15.740918 [ 1096.826183] xenbr0: port 2(vif7.0) entered blocking state Oct 3 13:42:15.740918 [ 1096.831593] xenbr0: port 2(vif7.0) entered forwarding state Oct 3 13:42:15.740918 [ 1139.489615] xenbr0: port 2(vif7.0) entered disabled state Oct 3 13:42:58.393782 [ 1139.681136] xenbr0: port 2(vif7.0) entered disabled state Oct 3 13:42:58.585735 [ 1139.685503] device vif7.0 left promiscuous mode Oct 3 13:42:58.597752 [ 1139.689815] xenbr0: port 2(vif7.0) entered disabled state Oct 3 13:42:58.597815 [ 1166.551973] xenbr0: port 2(vif8.0) entered blocking state Oct 3 13:43:25.461813 [ 1166.556025] xenbr0: port 2(vif8.0) entered disabled state Oct 3 13:43:25.473709 [ 1166.561685] device vif8.0 entered promiscuous mode Oct 3 13:43:25.473771 (XEN) d8v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 13:43:26.553719 (XEN) d8v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 13:43:26.565717 [ 1168.219640] xen-blkback: backend/vbd/8/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 13:43:27.141706 [ 1168.258854] xen-blkback: backend/vbd/8/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 13:43:27.177705 (XEN) common/grant_table.c:1909:d8v0 Expanding d8 grant table from 1 to 2 frames Oct 3 13:43:27.201717 [ 1168.546364] vif vif-8-0 vif8.0: Guest Rx ready Oct 3 13:43:27.453702 [ 1168.549613] IPv6: ADDRCONF(NETDEV_CHANGE): vif8.0: link becomes ready Oct 3 13:43:27.465766 [ 1168.556224] xenbr0: port 2(vif8.0) entered blocking state Oct 3 13:43:27.465830 [ 1168.561431] xenbr0: port 2(vif8.0) entered forwarding state Oct 3 13:43:27.477698 [ 1217.904503] xenbr0: port 2(vif8.0) entered disabled state Oct 3 13:44:16.812830 [ 1218.108686] xenbr0: port 2(vif8.0) entered disabled state Oct 3 13:44:17.020880 [ 1218.113332] device vif8.0 left promiscuous mode Oct 3 13:44:17.020880 [ 1218.117348] xenbr0: port 2(vif8.0) entered disabled state Oct 3 13:44:17.032830 [ 1244.971656] xenbr0: port 2(vif9.0) entered blocking state Oct 3 13:44:43.880862 [ 1244.975688] xenbr0: port 2(vif9.0) entered disabled state Oct 3 13:44:43.892973 [ 1244.981348] device vif9.0 entered promiscuous mode Oct 3 13:44:43.892998 (XEN) d9v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 13:44:44.976760 (XEN) d9v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 13:44:44.988762 [ 1247.042097] xen-blkback: backend/vbd/9/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 13:44:45.952872 [ 1247.079191] xen-blkback: backend/vbd/9/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 13:44:45.988868 (XEN) common/grant_table.c:1909:d9v0 Expanding d9 grant table from 1 to 2 frames Oct 3 13:44:46.108828 [ 1247.340158] vif vif-9-0 vif9.0: Guest Rx ready Oct 3 13:44:46.252881 [ 1247.346239] IPv6: ADDRCONF(NETDEV_CHANGE): vif9.0: link becomes ready Oct 3 13:44:46.264888 [ 1247.351527] xenbr0: port 2(vif9.0) entered blocking state Oct 3 13:44:46.264888 [ 1247.356843] xenbr0: port 2(vif9.0) entered forwarding state Oct 3 13:44:46.264888 [ 1296.252393] xenbr0: port 2(vif9.0) entered disabled state Oct 3 13:45:35.160740 [ 1296.438405] xenbr0: port 2(vif9.0) entered disabled state Oct 3 13:45:35.352779 [ 1296.442945] device vif9.0 left promiscuous mode Oct 3 13:45:35.352779 [ 1296.447151] xenbr0: port 2(vif9.0) entered disabled state Oct 3 13:45:35.364785 [ 1323.450428] xenbr0: port 2(vif10.0) entered blocking state Oct 3 13:46:02.361807 [ 1323.454546] xenbr0: port 2(vif10.0) entered disabled state Oct 3 13:46:02.361882 [ 1323.460352] device vif10.0 entered promiscuous mode Oct 3 13:46:02.373681 (XEN) d10v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 13:46:03.453772 (XEN) d10v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 13:46:03.465754 [ 1325.167881] xen-blkback: backend/vbd/10/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 13:46:04.077792 [ 1325.239781] xen-blkback: backend/vbd/10/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 13:46:04.149790 (XEN) common/grant_table.c:1909:d10v0 Expanding d10 grant table from 1 to 2 frames Oct 3 13:46:04.221810 [ 1325.427544] vif vif-10-0 vif10.0: Guest Rx ready Oct 3 13:46:04.341775 [ 1325.430902] IPv6: ADDRCONF(NETDEV_CHANGE): vif10.0: link becomes ready Oct 3 13:46:04.341841 [ 1325.437587] xenbr0: port 2(vif10.0) entered blocking state Oct 3 13:46:04.353683 [ 1325.443006] xenbr0: port 2(vif10.0) entered forwarding state Oct 3 13:46:04.353717 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 13:46:14.925680 [ 1374.756320] xenbr0: port 2(vif10.0) entered disabled state Oct 3 13:46:53.661764 [ 1374.938708] xenbr0: port 2(vif10.0) entered disabled state Oct 3 13:46:53.877500 [ 1374.943288] device vif10.0 left promiscuous mode Oct 3 13:46:53.877675 [ 1374.947527] xenbr0: port 2(vif10.0) entered disabled state Oct 3 13:46:53.877752 [ 1401.942310] xenbr0: port 2(vif11.0) entered blocking state Oct 3 13:47:20.857871 [ 1401.946432] xenbr0: port 2(vif11.0) entered disabled state Oct 3 13:47:20.857957 [ 1401.952217] device vif11.0 entered promiscuous mode Oct 3 13:47:20.858006 (XEN) d11v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 13:47:21.937795 (XEN) d11v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 13:47:21.961768 [ 1403.897469] xen-blkback: backend/vbd/11/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 13:47:22.813803 [ 1403.999795] xen-blkback: backend/vbd/11/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 13:47:22.909852 (XEN) common/grant_table.c:1909:d11v0 Expanding d11 grant table from 1 to 2 frames Oct 3 13:47:23.185803 [ 1404.528060] vif vif-11-0 vif11.0: Guest Rx ready Oct 3 13:47:23.437820 [ 1404.533588] IPv6: ADDRCONF(NETDEV_CHANGE): vif11.0: link becomes ready Oct 3 13:47:23.449844 [ 1404.538933] xenbr0: port 2(vif11.0) entered blocking state Oct 3 13:47:23.449909 [ 1404.544311] xenbr0: port 2(vif11.0) entered forwarding state Oct 3 13:47:23.461780 [ 1453.271022] xenbr0: port 2(vif11.0) entered disabled state Oct 3 13:48:12.181859 [ 1453.448634] xenbr0: port 2(vif11.0) entered disabled state Oct 3 13:48:12.349849 [ 1453.453134] device vif11.0 left promiscuous mode Oct 3 13:48:12.361888 [ 1453.457469] xenbr0: port 2(vif11.0) entered disabled state Oct 3 13:48:12.361952 [ 1480.921920] xenbr0: port 2(vif12.0) entered blocking state Oct 3 13:48:39.829998 [ 1480.926046] xenbr0: port 2(vif12.0) entered disabled state Oct 3 13:48:39.841922 [ 1480.931825] device vif12.0 entered promiscuous mode Oct 3 13:48:39.841985 (XEN) d12v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 13:48:40.921967 (XEN) d12v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 13:48:40.933939 [ 1482.874227] xen-blkback: backend/vbd/12/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 13:48:41.785956 [ 1482.906613] xen-blkback: backend/vbd/12/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 13:48:41.821924 (XEN) common/grant_table.c:1909:d12v0 Expanding d12 grant table from 1 to 2 frames Oct 3 13:48:41.893912 [ 1483.198285] vif vif-12-0 vif12.0: Guest Rx ready Oct 3 13:48:42.109977 [ 1483.201779] IPv6: ADDRCONF(NETDEV_CHANGE): vif12.0: link becomes ready Oct 3 13:48:42.110043 [ 1483.208555] xenbr0: port 2(vif12.0) entered blocking state Oct 3 13:48:42.121972 [ 1483.213721] xenbr0: port 2(vif12.0) entered forwarding state Oct 3 13:48:42.122036 [ 1522.508389] xenbr0: port 2(vif12.0) entered disabled state Oct 3 13:49:21.417096 [ 1522.608580] xenbr0: port 2(vif12.0) entered disabled state Oct 3 13:49:21.513019 [ 1522.615130] device vif12.0 left promiscuous mode Oct 3 13:49:21.525067 [ 1522.618560] xenbr0: port 2(vif12.0) entered disabled state Oct 3 13:49:21.525131 Oct 3 13:49:40.743721 (XEN) *** Serial input to Xen (type 'CTRL-x' three times to switch input) Oct 3 13:49:40.769776 Oct 3 13:49:40.771148 Oct 3 13:49:41.745599 (XEN) '0' pressed -> dumping Dom0's registers Oct 3 13:49:41.770059 (XEN) *** Dumping Dom0 vcpu#0 state: *** Oct 3 13:49:41.770121 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Oct 3 13:49:41.772154 Not tainted ]---- Oct 3 13:49:41.781703 (XEN) CPU: 0 Oct 3 13:49:41.781753 (XEN) PC: c031ce28 Oct 3 13:49:41.781796 (XEN) CPSR: 60030093 MODE:32-bit Guest SVC Oct 3 13:49:41.781841 (XEN) R0: 00000005 R1: 00000000 R2: 00488279 R3: c031ce20 Oct 3 13:49:41.793798 (XEN) R4: c1909d80 R5: c1b12200 R6: c1904d1c R7: c1904d78 Oct 3 13:49:41.793859 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c00 Oct 3 13:49:41.805672 (XEN) USR: SP: bed61948 LR: b6b48893 Oct 3 13:49:41.805731 (XEN) SVC: SP: c1901f40 LR: c0308df0 SPSR:60030013 Oct 3 13:49:41.805778 (XEN) ABT: SP: c1b22b10 LR: c0300ea0 SPSR:600f0193 Oct 3 13:49:41.817714 (XEN) UND: SP: c1b22b20 LR: c0300fa0 SPSR:60030093 Oct 3 13:49:41.817774 (XEN) IRQ: SP: c1b22b00 LR: c0300ba0 SPSR:60030193 Oct 3 13:49:41.829690 (XEN) FIQ: SP: c1b22b30 LR: c1b22b30 SPSR:00000000 Oct 3 13:49:41.829743 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 13:49:41.829792 (XEN) Oct 3 13:49:41.841750 (XEN) SCTLR: 10c5387d Oct 3 13:49:41.841808 (XEN) TCR: 00000000 Oct 3 13:49:41.841851 (XEN) TTBR0: 0000000068a3806a Oct 3 13:49:41.841894 (XEN) TTBR1: 000000006020406a Oct 3 13:49:41.841937 (XEN) IFAR: b6dca814, IFSR: 00000007 Oct 3 13:49:41.853693 (XEN) DFAR: 005b5318, DFSR: 0000081f Oct 3 13:49:41.853745 (XEN) Oct 3 13:49:41.853785 (XEN) VTCR_EL2: 80003558 Oct 3 13:49:41.853828 (XEN) VTTBR_EL2: 00010000bef8a000 Oct 3 13:49:41.865748 (XEN) Oct 3 13:49:41.865801 (XEN) SCTLR_EL2: 30cd187f Oct 3 13:49:41.865845 (XEN) HCR_EL2: 007c663f Oct 3 13:49:41.865886 (XEN) TTBR0_EL2: 000000004111d000 Oct 3 13:49:41.865929 (XEN) Oct 3 13:49:41.865968 (XEN) ESR_EL2: 07e00000 Oct 3 13:49:41.877726 (XEN) HPFAR_EL2: 00104810 Oct 3 13:49:41.877782 (XEN) HDFAR: e0807f00 Oct 3 13:49:41.877826 (XEN) HIFAR: 40008000 Oct 3 13:49:41.877868 (XEN) Oct 3 13:49:41.877906 (XEN) Guest stack trace from sp=c1901f40: Oct 3 13:49:41.889735 (XEN) Failed to convert stack to physical address Oct 3 13:49:41.889796 (XEN) *** Dumping Dom0 vcpu#1 state: *** Oct 3 13:49:41.889842 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 13:49:41.901757 (XEN) CPU: 0 Oct 3 13:49:41.901812 (XEN) PC: c031ce28 Oct 3 13:49:41.901854 (XEN) CPSR: 600f0093 MODE:32-bit Guest SVC Oct 3 13:49:41.901900 (XEN) R0: 00000005 R1: 00000000 R2: 003894c1 R3: c031ce20 Oct 3 13:49:41.913730 (XEN) R4: c210e600 R5: c1b12200 R6: c1904d1c R7: c1904d78 Oct 3 13:49:41.913792 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c00 Oct 3 13:49:41.925743 (XEN) USR: SP: beffd970 LR: b6e346c5 Oct 3 13:49:41.925802 (XEN) SVC: SP: e08c9f90 LR: c0308df0 SPSR:600f0013 Oct 3 13:49:41.925848 (XEN) ABT: SP: c1b22b50 LR: c0300ea0 SPSR:60070193 Oct 3 13:49:41.937776 (XEN) UND: SP: c1b22b60 LR: c0300fa0 SPSR:60030093 Oct 3 13:49:41.937836 (XEN) IRQ: SP: c1b22b40 LR: c0300ba0 SPSR:600f0193 Oct 3 13:49:41.949754 (XEN) FIQ: SP: c1b22b70 LR: c1b22b70 SPSR:00000000 Oct 3 13:49:41.949814 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 13:49:41.961743 (XEN) Oct 3 13:49:41.961796 (XEN) SCTLR: 10c5387d Oct 3 13:49:41.961840 (XEN) TCR: 00000000 Oct 3 13:49:41.961882 (XEN) TTBR0: 0000000063b8806a Oct 3 13:49:41.961924 (XEN) TTBR1: 000000006020406a Oct 3 13:49:41.973734 (XEN) IFAR: b6eba02c, IFSR: 00000007 Oct 3 13:49:41.973793 (XEN) DFAR: b6baf000, DFSR: 0000081f Oct 3 13:49:41.973839 (XEN) Oct 3 13:49:41.973877 (XEN) VTCR_EL2: 80003558 Oct 3 13:49:41.973919 (XEN) VTTBR_EL2: 00010000bef8a000 Oct 3 13:49:41.985749 (XEN) Oct 3 13:49:41.985802 (XEN) SCTLR_EL2: 30cd187f Oct 3 13:49:41.985845 (XEN) HCR_EL2: 007c663f Oct 3 13:49:41.985905 (XEN) TTBR0_EL2: 000000004111d000 Oct 3 13:49:41.985951 (XEN) Oct 3 13:49:41.985990 (XEN) ESR_EL2: 07e00000 Oct 3 13:49:41.997742 (XEN) HPFAR_EL2: 00104810 Oct 3 13:49:41.997798 (XEN) HDFAR: e0807f00 Oct 3 13:49:41.997841 (XEN) HIFAR: 40008000 Oct 3 13:49:41.997883 (XEN) Oct 3 13:49:41.997921 (XEN) Guest stack trace from sp=e08c9f90: Oct 3 13:49:42.009708 (XEN) Failed to convert stack to physical address Oct 3 13:49:42.009769 Oct 3 13:49:43.745702 (XEN) 'H' pressed -> dumping heap info (now = 1550130823625) Oct 3 13:49:43.769809 (XEN) heap[node=0][zone=0] -> 16279 pages Oct 3 13:49:43.769870 (XEN) heap[node=0][zone=1] -> 0 pages Oct 3 13:49:43.769915 (XEN) heap[node=0][zone=2] -> 0 pages Oct 3 13:49:43.773032 Oct 3 13:49:43.781683 (XEN) heap[node=0][zone=3] -> 0 pages Oct 3 13:49:43.781747 (XEN) heap[node=0][zone=4] -> 0 pages Oct 3 13:49:43.781794 (XEN) heap[node=0][zone=5] -> 0 pages Oct 3 13:49:43.781837 (XEN) heap[node=0][zone=6] -> 0 pages Oct 3 13:49:43.793795 (XEN) heap[node=0][zone=7] -> 0 pages Oct 3 13:49:43.793854 (XEN) heap[node=0][zone=8] -> 0 pages Oct 3 13:49:43.793899 (XEN) heap[node=0][zone=9] -> 0 pages Oct 3 13:49:43.793943 (XEN) heap[node=0][zone=10] -> 0 pages Oct 3 13:49:43.805750 (XEN) heap[node=0][zone=11] -> 0 pages Oct 3 13:49:43.805808 (XEN) heap[node=0][zone=12] -> 0 pages Oct 3 13:49:43.805852 (XEN) heap[node=0][zone=13] -> 0 pages Oct 3 13:49:43.817739 (XEN) heap[node=0][zone=14] -> 0 pages Oct 3 13:49:43.817798 (XEN) heap[node=0][zone=15] -> 0 pages Oct 3 13:49:43.817843 (XEN) heap[node=0][zone=16] -> 0 pages Oct 3 13:49:43.829749 (XEN) heap[node=0][zone=17] -> 0 pages Oct 3 13:49:43.829810 (XEN) heap[node=0][zone=18] -> 0 pages Oct 3 13:49:43.829855 (XEN) heap[node=0][zone=19] -> 130813 pages Oct 3 13:49:43.829900 (XEN) heap[node=0][zone=20] -> 241609 pages Oct 3 13:49:43.841734 (XEN) heap[node=0][zone=21] -> 0 pages Oct 3 13:49:43.841792 (XEN) heap[node=0][zone=22] -> 0 pages Oct 3 13:49:43.841837 (XEN) heap[node=0][zone=23] -> 0 pages Oct 3 13:49:43.853733 (XEN) heap[node=0][zone=24] -> 0 pages Oct 3 13:49:43.853792 (XEN) heap[node=0][zone=25] -> 0 pages Oct 3 13:49:43.853838 (XEN) heap[node=0][zone=26] -> 0 pages Oct 3 13:49:43.853881 (XEN) heap[node=0][zone=27] -> 0 pages Oct 3 13:49:43.865718 (XEN) heap[node=0][zone=28] -> 0 pages Oct 3 13:49:43.865776 Oct 3 13:49:45.748791 Oct 3 13:49:47.516199 Oct 3 13:49:47.755310 Oct 3 13:49:49.522280 Oct 3 13:49:49.757716 (XEN) Dumping timer queues: Oct 3 13:49:49.777851 (XEN) CPU00: Oct 3 13:49:49.777907 (XEN) ex= 339540us timer=43fdc968 cb=arch/arm/vtimer.c#virt_timer_expired(43fdc960) Oct 3 13:49:49.777964 ( Oct 3 13:49:49.779958 XEN) CPU01: Oct 3 13:49:49.789689 (XEN) ex= 26279us timer=43fee968 cb=arch/arm/vtimer.c#virt_timer_expired(43fee960) Oct 3 13:49:49.789757 Oct 3 13:49:51.740545 Oct 3 13:49:53.531552 Oct 3 13:49:53.755543 (XEN) 'd' pressed -> dumping registers Oct 3 13:49:53.769946 (XEN) Oct 3 13:49:53.769946 (XEN) *** Dumping CPU0 host state: *** Oct 3 13:49:53.769946 (XEN) ----[ Xen-4.20-unstable arm32 debug=y N Oct 3 13:49:53.772204 ot tainted ]---- Oct 3 13:49:53.781887 (XEN) CPU: 0 Oct 3 13:49:53.781887 (XEN) PC: 00269e8c arch/arm/domain.c#idle_loop+0x134/0x1b0 Oct 3 13:49:53.781887 (XEN) CPSR: 600f005a MODE:Hypervisor Oct 3 13:49:53.793835 (XEN) R0: 00000000 R1: 00000001 R2: 00000000 R3: 00000000 Oct 3 13:49:53.793835 (XEN) R4: 00000000 R5: 00310108 R6: 0034333c R7: 00000001 Oct 3 13:49:53.793844 (XEN) R8: 00340108 R9: 00000000 R10:40e00000 R11:4003ff54 R12:fffffffc Oct 3 13:49:53.805844 (XEN) HYP: SP: 4003ff44 LR: 0022c2d0 Oct 3 13:49:53.805844 (XEN) Oct 3 13:49:53.805850 (XEN) VTCR_EL2: 80003558 Oct 3 13:49:53.817792 (XEN) VTTBR_EL2: 00010000bef8a000 Oct 3 13:49:53.817804 (XEN) Oct 3 13:49:53.817845 (XEN) SCTLR_EL2: 30cd187f Oct 3 13:49:53.817887 (XEN) HCR_EL2: 007c663f Oct 3 13:49:53.817929 (XEN) TTBR0_EL2: 000000004111d000 Oct 3 13:49:53.829825 (XEN) Oct 3 13:49:53.829825 (XEN) ESR_EL2: 07e00000 Oct 3 13:49:53.829831 (XEN) HPFAR_EL2: 00104810 Oct 3 13:49:53.829873 (XEN) HDFAR: e0807f00 Oct 3 13:49:53.829915 (XEN) HIFAR: 40008000 Oct 3 13:49:53.829956 (XEN) Oct 3 13:49:53.829994 (XEN) Xen stack trace from sp=4003ff44: Oct 3 13:49:53.841849 (XEN) 07e00000 002ac008 002a102c 4003ff4c 00272664 00000000 00000000 00000000 Oct 3 13:49:53.841849 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 13:49:53.853831 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 13:49:53.865836 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 13:49:53.865836 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 13:49:53.877825 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 13:49:53.877825 (XEN) Xen call trace: Oct 3 13:49:53.877858 (XEN) [<00269e8c>] arch/arm/domain.c#idle_loop+0x134/0x1b0 (PC) Oct 3 13:49:53.889827 (XEN) [<0022c2d0>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 13:49:53.889827 (XEN) [<00272664>] arch_get_xen_caps+0/0x90 Oct 3 13:49:53.901947 (XEN) Oct 3 13:49:53.902001 (XEN) *** Dumping CPU1 host state: *** Oct 3 13:49:53.902047 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 13:49:53.902096 (XEN) CPU: 1 Oct 3 13:49:53.913827 (XEN) PC: 00269e8c arch/arm/domain.c#idle_loop+0x134/0x1b0 Oct 3 13:49:53.913827 (XEN) CPSR: 6003005a MODE:Hypervisor Oct 3 13:49:53.913846 (XEN) R0: 00000000 R1: 00000001 R2: 3fcf6000 R3: 00000000 Oct 3 13:49:53.925829 (XEN) R4: 00000001 R5: 00310108 R6: 0034333c R7: 00000002 Oct 3 13:49:53.925829 (XEN) R8: 00340108 R9: 00000001 R10:40e00000 R11:4000ff54 R12:fffffffc Oct 3 13:49:53.937834 (XEN) HYP: SP: 4000ff44 LR: 0022c2d0 Oct 3 13:49:53.937834 (XEN) Oct 3 13:49:53.937844 (XEN) VTCR_EL2: 80003558 Oct 3 13:49:53.937886 (XEN) VTTBR_EL2: 00010000bef8a000 Oct 3 13:49:53.949825 (XEN) Oct 3 13:49:53.949825 (XEN) SCTLR_EL2: 30cd187f Oct 3 13:49:53.949833 (XEN) HCR_EL2: 007c663f Oct 3 13:49:53.949875 (XEN) TTBR0_EL2: 00000000ba004000 Oct 3 13:49:53.949917 (XEN) Oct 3 13:49:53.949955 (XEN) ESR_EL2: 07e00000 Oct 3 13:49:53.961825 (XEN) HPFAR_EL2: 00104810 Oct 3 13:49:53.961825 (XEN) HDFAR: e0807f00 Oct 3 13:49:53.961835 (XEN) HIFAR: c0a19dbc Oct 3 13:49:53.961878 (XEN) Oct 3 13:49:53.961916 (XEN) Xen stack trace from sp=4000ff44: Oct 3 13:49:53.973838 (XEN) 07e00000 00311390 00000001 4000ff3c 00272f48 00000000 00000000 00000000 Oct 3 13:49:53.973838 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 13:49:53.985840 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 13:49:53.985840 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 13:49:53.997826 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 13:49:53.997826 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 13:49:54.009826 (XEN) Xen call trace: Oct 3 13:49:54.009826 (XEN) [<00269e8c>] arch/arm/domain.c#idle_loop+0x134/0x1b0 (PC) Oct 3 13:49:54.021842 (XEN) [<0022c2d0>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 13:49:54.021842 (XEN) [<00272f48>] start_secondary+0x208/0x20c Oct 3 13:49:54.021878 (XEN) Oct 3 13:49:54.021920 Oct 3 13:49:55.754250 (XEN) 'e' pressed -> dumping event-channel info Oct 3 13:49:55.773940 (XEN) Event channel information for domain 0: Oct 3 13:49:55.773940 (XEN) Polling vCPUs: {} Oct 3 13:49:55.773940 (XEN) port Oct 3 13:49:55.776061 [p/m/s] Oct 3 13:49:55.785773 (XEN) 1 [0/0/ - ]: s=3 n=1 x=0 d=0 p=4 Oct 3 13:49:55.785786 (XEN) 2 [0/0/ - ]: s=5 n=0 x=0 v=2 Oct 3 13:49:55.785833 (XEN) 3 [0/0/ - ]: s=5 n=1 x=0 v=3 Oct 3 13:49:55.797764 (XEN) 4 [0/0/ - ]: s=3 n=0 x=0 d=0 p=1 Oct 3 13:49:55.797768 Oct 3 13:49:57.765714 (XEN) gnttab_usage_print_all [ key 'g' pressed Oct 3 13:49:57.789937 (XEN) -------- active -------- -------- shared -------- Oct 3 13:49:57.789937 (XEN) [ref] localdo Oct 3 13:49:57.792236 m mfn pin localdom gmfn flags Oct 3 13:49:57.801918 (XEN) grant-table for remote d0 (v1) Oct 3 13:49:57.801979 (XEN) 1 frames (64 max), 4 maptrack frames (1024 max) Oct 3 13:49:57.813799 (XEN) no active grant table entries Oct 3 13:49:57.813807 (XEN) gnttab_usage_print_all ] done Oct 3 13:49:57.813854 Oct 3 13:49:59.747503 Oct 3 13:50:01.540412 Oct 3 13:50:01.764457 (XEN) Physical memory information: Oct 3 13:50:01.777777 (XEN) Xen heap: 65116kB free Oct 3 13:50:01.777777 (XEN) heap[19]: Oct 3 13:50:01.779293 523252kB free Oct 3 13:50:01.789649 (XEN) heap[20]: 966436kB free Oct 3 13:50:01.789649 (XEN) Dom heap: 1489688kB free Oct 3 13:50:01.789649 Oct 3 13:50:03.786117 Oct 3 13:50:05.551811 Oct 3 13:50:05.790843 (XEN) sched_smt_power_savings: disabled Oct 3 13:50:05.813866 (XEN) NOW=1572179078083 Oct 3 13:50:05.813907 (XEN) Online Cpus: 0-1 Oct 3 13:50:05.813907 (XEN) Cpupool 0: Oct 3 13:50:05.813907 (XEN) Cpus: 0-1 Oct 3 13:50:05.813907 (XEN) Sched Oct 3 13:50:05.816192 uling granularity: cpu, 1 CPU per sched-resource Oct 3 13:50:05.825736 (XEN) Scheduler: SMP Credit Scheduler rev2 (credit2) Oct 3 13:50:05.825736 (XEN) Active queues: 1 Oct 3 13:50:05.825736 (XEN) default-weight = 256 Oct 3 13:50:05.837773 (XEN) Runqueue 0: Oct 3 13:50:05.837835 (XEN) ncpus = 2 Oct 3 13:50:05.837880 (XEN) cpus = 0-1 Oct 3 13:50:05.837923 (XEN) max_weight = 256 Oct 3 13:50:05.849692 (XEN) pick_bias = 0 Oct 3 13:50:05.849692 (XEN) instload = 0 Oct 3 13:50:05.849692 (XEN) aveload = 989 (~0%) Oct 3 13:50:05.849692 (XEN) idlers: 2 Oct 3 13:50:05.849692 (XEN) tickled: 0 Oct 3 13:50:05.861720 (XEN) fully idle cores: 2 Oct 3 13:50:05.861720 (XEN) Domain info: Oct 3 13:50:05.861720 (XEN) Domain: 0 w 256 c 0 v 2 Oct 3 13:50:05.861720 (XEN) 1: [0.0] flags=0 cpu=1 credit=8675944 [w=256] load=995 (~0%) Oct 3 13:50:05.873662 (XEN) 2: [0.1] flags=0 cpu=0 credit=10371500 [w=256] load=59 (~0%) Oct 3 13:50:05.873662 (XEN) Runqueue 0: Oct 3 13:50:05.873662 (XEN) CPU[00] runq=0, sibling={0}, core={0-1} Oct 3 13:50:05.885659 (XEN) CPU[01] runq=0, sibling={1}, core={0-1} Oct 3 13:50:05.885659 (XEN) RUNQ: Oct 3 13:50:05.885659 (XEN) 0: [0.0] flags=0 cpu=1 credit=8675944 [w=256] load=966 (~0%) Oct 3 13:50:05.897654 (XEN) CPUs info: Oct 3 13:50:05.897654 (XEN) CPU[00] current=d[IDLE]v0, curr=d[IDLE]v0, prev=NULL Oct 3 13:50:05.897654 (XEN) CPU[01] current=d[IDLE]v1, curr=d[IDLE]v1, prev=NULL Oct 3 13:50:05.909595 Oct 3 13:50:07.798210 Oct 3 13:50:09.559859 Oct 3 13:50:09.815744 (XEN) Synced stime skew: max=125ns avg=125ns samples=1 current=125ns Oct 3 13:50:09.837623 (XEN) Synced cycles Oct 3 13:50:09.839844 skew: max=8 avg=8 samples=1 current=8 Oct 3 13:50:09.849677 Oct 3 13:50:11.798247 Oct 3 13:50:13.566388 Oct 3 13:50:13.826542 Oct 3 13:50:15.572493 Oct 3 13:50:15.806621 Oct 3 13:50:17.579143 Oct 3 13:50:27.822659 (XEN) 'q' pressed -> dumping domain info (now = 1594206488416) Oct 3 13:50:27.837802 (XEN) General information for domain 0: Oct 3 13:50:27.837860 (XEN) refcnt=3 dying=0 paus Oct 3 13:50:27.840157 e_count=0 Oct 3 13:50:27.849728 (XEN) nr_pages=131072 xenheap_pages=2 dirty_cpus={} max_pages=131072 Oct 3 13:50:27.849789 (XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=00000020 Oct 3 13:50:27.861797 (XEN) p2m mappings for domain 0 (vmid 1): Oct 3 13:50:27.861848 (XEN) 1G mappings: 0 (shattered 0) Oct 3 13:50:27.861873 (XEN) 2M mappings: 239 (shattered 17) Oct 3 13:50:27.873722 (XEN) 4K mappings: 3737 Oct 3 13:50:27.873779 (XEN) Rangesets belonging to domain 0: Oct 3 13:50:27.873824 (XEN) Interrupts { 32-72, 74, 77-79, 82-84, 86, 88-100, 103-104, 107-110, 114, 116-120, 123, 126-128, 138, 144, 146-147, 149-151, 156 } Oct 3 13:50:27.885778 (XEN) I/O Memory { 2020-2050, 3810-3811, 3830-3831, 3860-3861, 10000-10001, 10010-10045, 10050-10055, 10060-10061, 101b0-101b1, 101d0-101d1, 101e0-101e1, 10440-10441, 10800-10801, 10830-10831, 10850-10851, 10a60-10a61, 10d10-10d11, 11000-11010, 11200-11201, 11210-11211, 11400-11401, 11800-11805, 11c00-11c01, 11c10-11c11, 11d40-11d41, 11f20-11f21, 12000-12010, 12100-12101, 12110-12111, 12120-12121, 12130-12131, 12170-12171, 121a0-121a1, 121b0-121b1, 121d0-121d1, 12200-12201, 12210-12211, 12220-12221, 12230-12231, 12250-12251, 122f0-122f1, 12c00-12c01, 12c10-12c11, 12c30-12c31, 12c60-12c61, 12c70-12c71, 12c80-12c81, 12c90-12c91, 12ca0-12ca1, 12cb0-12cb1, 12cc0-12cc1, 12cd0-12cd1, 12ce0-12ce1, 12d10-12d11, 12d20-12d21, 12d30-12d31, 12d40-12d41, 12d60-12d61, 12d70-12d71, 12dd0-12dd1, 13260-13261, 13270-13271, 13280-13281, 13290-13291, 132a0-132a1, 132b0-132b1, 132c0-132c1, 132d0-132d1, 132e0-132e1, 132f0-132f1, 13400-13401, 13c40-13c41, 13c50-13c51, 13e00-13e01, 13e10-13e11, 13e20-13e21, 13e30-13e31, 13e80-13e81, 13e90-13e91, 13ea0-13ea1, 13eb0-13eb1, 14400-14440, 14450-14460, 14500-14510, 14530-145a0, 145b0-145b1, 14640-14641, 14650-14651 } Oct 3 13:50:27.981768 (XEN) NODE affinity for domain 0: [0] Oct 3 13:50:27.993748 (XEN) VCPU information and callbacks for domain 0: Oct 3 13:50:27.993809 (XEN) UNIT0 affinities: hard={0-1} soft={0-1} Oct 3 13:50:27.993856 (XEN) VCPU0: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 13:50:28.005775 (XEN) pause_count=0 pause_flags=1 Oct 3 13:50:28.005833 (XEN) GICH_LRs (vcpu 0) mask=0 Oct 3 13:50:28.005877 (XEN) VCPU_LR[0]=0 Oct 3 13:50:28.017749 (XEN) VCPU_LR[1]=0 Oct 3 13:50:28.017805 (XEN) VCPU_LR[2]=0 Oct 3 13:50:28.017847 (XEN) VCPU_LR[3]=0 Oct 3 13:50:28.017888 (XEN) No periodic timer Oct 3 13:50:28.017930 (XEN) UNIT1 affinities: hard={0-1} soft={0-1} Oct 3 13:50:28.029748 (XEN) VCPU1: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 13:50:28.029812 (XEN) pause_count=0 pause_flags=1 Oct 3 13:50:28.029857 (XEN) GICH_LRs (vcpu 1) mask=0 Oct 3 13:50:28.041780 (XEN) VCPU_LR[0]=0 Oct 3 13:50:28.041836 (XEN) VCPU_LR[1]=0 Oct 3 13:50:28.041878 (XEN) VCPU_LR[2]=0 Oct 3 13:50:28.041920 (XEN) VCPU_LR[3]=0 Oct 3 13:50:28.041989 (XEN) No periodic timer Oct 3 13:50:28.053718 (XEN) Notifying guest 0:0 (virq 1, port 0) Oct 3 13:50:28.053778 (XEN) Notifying guest 0:1 (virq 1, port 0) Oct 3 13:50:28.053824 Oct 3 13:50:39.798190 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 13:50:39.817788 Oct 3 13:50:39.817841 arndale-westfield login: Oct 3 13:50:39.818888 [ 1683.599246] sd 0:0:0:0: [sda] Synchronizing SCSI cache Oct 3 13:52:02.501926 [ 1683.631766] wake enabled for irq 119 (gpx1-4) Oct 3 13:52:02.537764 [ 1683.634754] wake enabled for irq 120 (gpx1-5) Oct 3 13:52:02.537825 [ 1683.639204] wake enabled for irq 121 (gpx1-6) Oct 3 13:52:02.549741 [ 1683.643606] wake enabled for irq 122 (gpx1-7) Oct 3 13:52:02.549802 [ 1683.648047] wake enabled for irq 123 (gpx2-0) Oct 3 13:52:02.561641 [ 1683.652479] wake enabled for irq 124 (gpx2-1) Oct 3 13:52:02.561703 [ 1683.657315] reboot: Resô Oct 3 13:52:02.897621 Oct 3 13:52:02.897638 Oct 3 13:52:02.897706 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 13:52:02.909669 Oct 3 13:52:02.909699 CPU: Exynos5250@1000MHz Oct 3 13:52:02.909744 Oct 3 13:52:02.909783 Board: Arndale Oct 3 13:52:02.909824 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 13:52:02.909873 ready Oct 3 13:52:02.909912 DRAM: 2 GiB Oct 3 13:52:02.921589 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 13:52:02.933627 trace: enabled Oct 3 13:52:02.969600 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 13:52:03.329610 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 13:52:03.389642 In: serial Oct 3 13:52:03.389698 Out: serial Oct 3 13:52:03.389739 Err: serial Oct 3 13:52:03.389780 SCSI: ARNDALE SCSI INIT Oct 3 13:52:03.389823 Target spinup took 0 ms. Oct 3 13:52:03.401643 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 13:52:03.401696 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 13:52:03.413664 Net: Net Initialization Skipped Oct 3 13:52:03.413713 No ethernet found. Oct 3 13:52:03.413756 Hostname: arndale-westfield Oct 3 13:52:03.413800 Hit any key to stop autoboot: 2  1  0 Oct 3 13:52:05.345778 (Re)start USB... Oct 3 13:52:05.345837 USB0: USB EHCI 1.00 Oct 3 13:52:05.345881 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 13:52:10.941016 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 13:52:10.953068 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 13:52:11.401031 Waiting for Ethernet connection... done. Oct 3 13:52:13.193043 BOOTP broadcast 1 Oct 3 13:52:13.193133 EHCI timed out on TD - token=0x8008d80 Oct 3 13:52:17.989089 BOOTP broadcast 2 Oct 3 13:52:17.989165 DHCP client bound to address 10.149.64.45 (5006 ms) Oct 3 13:52:18.001058 Using asx0 device Oct 3 13:52:18.001114 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 13:52:18.001164 Filename 'pxelinux.0'. Oct 3 13:52:18.001207 Load address: 0x43e00000 Oct 3 13:52:18.012989 Loading: *### Oct 3 13:52:18.024996 2.4 MiB/s Oct 3 13:52:18.025092 done Oct 3 13:52:18.025140 Bytes transferred = 42430 (a5be hex) Oct 3 13:52:18.025186 missing environment variable: pxeuuid Oct 3 13:52:18.037063 Retrieving file: pxelinux.cfg/0A95402D Oct 3 13:52:18.037148 Using asx0 device Oct 3 13:52:18.037249 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 13:52:18.049047 Filename 'pxelinux.cfg/0A95402D'. Oct 3 13:52:18.049125 Load address: 0x51000000 Oct 3 13:52:18.049173 Loading: *# Oct 3 13:52:18.049214 355.5 KiB/s Oct 3 13:52:18.049299 done Oct 3 13:52:18.049340 Bytes transferred = 728 (2d8 hex) Oct 3 13:52:18.060984 Config file found Oct 3 13:52:18.061064 Ignoring unknown command: serial Oct 3 13:52:18.061122 1: ^Overwrite Oct 3 13:52:18.061206 Retrieving file: /osstest/tmp//arndale-westfield--initrd.gz Oct 3 13:52:18.061295 Using asx0 device Oct 3 13:52:18.072891 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 13:52:18.072891 Filename '/osstest/tmp//arndale-westfield--initrd.gz'. Oct 3 13:52:18.072891 Load address: 0x43300000 Oct 3 13:52:18.084837 Loading: *################################################################# Oct 3 13:52:18.408917 ################################################################# Oct 3 13:52:18.732811 ################################################################# Oct 3 13:52:19.056794 ################################################################# Oct 3 13:52:19.384800 ################################################################# Oct 3 13:52:19.708783 ################################################################# Oct 3 13:52:20.008821 ################################################################# Oct 3 13:52:20.308997 ################################################################# Oct 3 13:52:20.572795 ################################################################# Oct 3 13:52:20.857683 ################################################################# Oct 3 13:52:21.145669 ################################################################# Oct 3 13:52:21.445660 ################################################################# Oct 3 13:52:21.745620 ################################################################# Oct 3 13:52:22.021617 ################################################################# Oct 3 13:52:22.297613 ################################################################# Oct 3 13:52:22.573611 ################################################################# Oct 3 13:52:22.873617 ################################################################# Oct 3 13:52:23.173612 ################################################################# Oct 3 13:52:23.473619 ################################################################# Oct 3 13:52:23.773694 ################################################################# Oct 3 13:52:24.073617 ################################################################# Oct 3 13:52:24.361613 ################################################################# Oct 3 13:52:24.673605 ################################################################# Oct 3 13:52:24.973615 ################################################################# Oct 3 13:52:25.261551 ################################################################# Oct 3 13:52:25.561617 ################################################################# Oct 3 13:52:25.861630 ################################################################# Oct 3 13:52:26.161569 ######################################## Oct 3 13:52:26.341611 2.9 MiB/s Oct 3 13:52:26.341628 done Oct 3 13:52:26.341650 Bytes transferred = 26339180 (191e76c hex) Oct 3 13:52:26.353657 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/linux Oct 3 13:52:26.365681 Using asx0 device Oct 3 13:52:26.365702 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 13:52:26.365729 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/linux'. Oct 3 13:52:26.377647 Load address: 0x42000000 Oct 3 13:52:26.377666 Loading: *################################################################# Oct 3 13:52:26.689614 ################################################################# Oct 3 13:52:26.965609 ################################################################# Oct 3 13:52:27.277565 ################################################################# Oct 3 13:52:27.589562 ################################################################# Oct 3 13:52:27.901645 ############################################# Oct 3 13:52:28.117642 2.8 MiB/s Oct 3 13:52:28.129690 done Oct 3 13:52:28.129719 Bytes transferred = 5427712 (52d200 hex) Oct 3 13:52:28.129745 append: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=42999 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 13:52:28.165746 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb Oct 3 13:52:28.177713 Using asx0 device Oct 3 13:52:28.177743 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 13:52:28.189708 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb'. Oct 3 13:52:28.189746 Load address: 0x43000000 Oct 3 13:52:28.201642 Loading: *#### Oct 3 13:52:28.213669 2.3 MiB/s Oct 3 13:52:28.213699 done Oct 3 13:52:28.213721 Bytes transferred = 46686 (b65e hex) Oct 3 13:52:28.213745 Kernel image @ 0x42000000 [ 0x000000 - 0x52d200 ] Oct 3 13:52:28.225707 ## Flattened Device Tree blob at 43000000 Oct 3 13:52:28.225739 Booting using the fdt blob at 0x43000000 Oct 3 13:52:28.225764 Loading Ramdisk to 4e6e1000, end 4ffff76c ... OK Oct 3 13:52:28.657668 Loading Device Tree to 4e6d2000, end 4e6e065d ... OK Oct 3 13:52:28.657702 Oct 3 13:52:28.669654 Starting kernel ...(fake run for tracing) Oct 3 13:52:28.669687 Oct 3 13:52:28.669708 Oct 3 13:52:28.669729 Starting kernel ... Oct 3 13:52:28.681630 Oct 3 13:52:28.681659 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 13:52:34.729802 [ 0.000000] Linux version 6.1.0-25-armmp (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.106-3 (2024-08-26) Oct 3 13:52:34.741786 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 13:52:34.741831 [ 0.000000] CPU: div instructions available: patching division code Oct 3 13:52:34.753729 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 13:52:34.765709 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 13:52:34.765748 [ 0.000000] Memory policy: Data cache writealloc Oct 3 13:52:34.777715 [ 0.000000] efi: UEFI not found. Oct 3 13:52:34.777748 [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 Oct 3 13:52:34.777774 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 13:52:34.789716 [ 0.000000] Zone ranges: Oct 3 13:52:34.789748 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 13:52:34.789775 [ 0.000000] Normal empty Oct 3 13:52:34.801782 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 13:52:34.801786 [ 0.000000] Movable zone start for each node Oct 3 13:52:34.801786 [ 0.000000] Early memory node ranges Oct 3 13:52:34.813636 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 13:52:34.813636 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 13:52:34.825633 [ 0.000000] percpu: Embedded 18 pages/cpu s44692 r8192 d20844 u73728 Oct 3 13:52:34.825633 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 13:52:34.837630 [ 0.000000] Kernel command line: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=42999 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 13:52:34.885621 [ 0.000000] Unknown kernel command line parameters "preseed --- vga=normal auto=true hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=42999 domain=test-lab.xenproject.org", will be passed to user space. Oct 3 13:52:34.921629 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 13:52:34.921629 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 13:52:34.933659 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 13:52:34.945717 [ 0.000000] Memory: 2015968K/2097152K available (11264K kernel code, 1696K rwdata, 3724K rodata, 2048K init, 376K bss, 64800K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 13:52:34.957709 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 13:52:34.957744 [ 0.000000] ftrace: allocating 39612 entries in 117 pages Oct 3 13:52:34.969718 [ 0.000000] ftrace: allocated 117 pages with 5 groups Oct 3 13:52:34.969752 [ 0.000000] trace event string verifier disabled Oct 3 13:52:34.981704 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 13:52:34.981737 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 13:52:34.993705 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 13:52:34.993739 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 13:52:34.993765 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 13:52:35.005721 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 13:52:35.017708 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 13:52:35.017743 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 13:52:35.017769 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 13:52:35.029714 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 13:52:35.029748 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 13:52:35.041706 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 13:52:35.053697 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 13:52:35.053734 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 13:52:35.065654 [ 0.002619] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 13:52:35.077711 [ 0.002633] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 13:52:35.077757 [ 0.002647] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 13:52:35.089721 [ 0.002659] Ignoring duplicate/late registration of read_current_timer delay Oct 3 13:52:35.101663 [ 0.003014] Console: colour dummy device 80x30 Oct 3 13:52:35.101663 [ 0.003055] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 13:52:35.113728 [ 0.003068] CPU: Testing write buffer coherency: ok Oct 3 13:52:35.113761 [ 0.003110] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 13:52:35.125719 [ 0.003117] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 13:52:35.137727 [ 0.003124] pid_max: default: 32768 minimum: 301 Oct 3 13:52:35.137760 [ 0.003483] LSM: Security Framework initializing Oct 3 13:52:35.137786 [ 0.003555] landlock: Up and running. Oct 3 13:52:35.149718 [ 0.003560] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 13:52:35.149754 [ 0.003745] AppArmor: AppArmor initialized Oct 3 13:52:35.161715 [ 0.003758] TOMOYO Linux initialized Oct 3 13:52:35.161747 [ 0.003804] LSM support for eBPF active Oct 3 13:52:35.161772 [ 0.004048] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 13:52:35.173734 [ 0.004062] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 13:52:35.173772 [ 0.005493] /cpus/cpu@0 missing clock-frequency property Oct 3 13:52:35.185710 [ 0.005520] /cpus/cpu@1 missing clock-frequency property Oct 3 13:52:35.185744 [ 0.005533] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 13:52:35.197684 [ 0.006489] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 13:52:35.197721 [ 0.006495] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 13:52:35.209720 [ 0.006600] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 13:52:35.221706 [ 0.006606] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 13:52:35.221740 [ 0.006751] Setting up static identity map for 0x40300000 - 0x403000ac Oct 3 13:52:35.233747 [ 0.007904] rcu: Hierarchical SRCU implementation. Oct 3 13:52:35.233747 [ 0.007910] rcu: Max phase no-delay instances is 1000. Oct 3 13:52:35.233747 [ 0.010038] EFI services will not be available. Oct 3 13:52:35.245776 [ 0.010386] smp: Bringing up secondary CPUs ... Oct 3 13:52:35.245776 [ 0.011129] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 13:52:35.257636 [ 0.011142] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 13:52:35.257636 [ 0.011272] smp: Brought up 1 node, 2 CPUs Oct 3 13:52:35.269630 [ 0.011280] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 13:52:35.269630 [ 0.011288] CPU: All CPU(s) started in HYP mode. Oct 3 13:52:35.281729 [ 0.011292] CPU: Virtualization extensions available. Oct 3 13:52:35.281729 [ 0.011914] devtmpfs: initialized Oct 3 13:52:35.281729 [ 0.023357] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 13:52:35.293831 [ 0.023590] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 13:52:35.305794 [ 0.023616] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 13:52:35.305794 [ 0.024135] pinctrl core: initialized pinctrl subsystem Oct 3 13:52:35.317797 [ 0.024829] DMI not present or invalid. Oct 3 13:52:35.317797 [ 0.025505] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 13:52:35.329631 [ 0.030893] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 13:52:35.329631 [ 0.032445] audit: initializing netlink subsys (disabled) Oct 3 13:52:35.341629 [ 0.032652] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 Oct 3 13:52:35.341629 [ 0.033810] thermal_sys: Registered thermal governor 'fair_share' Oct 3 13:52:35.353626 [ 0.033818] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 13:52:35.353626 [ 0.033822] thermal_sys: Registered thermal governor 'step_wise' Oct 3 13:52:35.365627 [ 0.033827] thermal_sys: Registered thermal governor 'user_space' Oct 3 13:52:35.365627 [ 0.033831] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 13:52:35.377628 [ 0.034206] No ATAGs? Oct 3 13:52:35.377628 [ 0.034276] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 13:52:35.389633 [ 0.034284] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 13:52:35.389633 [ 0.035369] Serial: AMBA PL011 UART driver Oct 3 13:52:35.389633 [ 0.084748] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 13:52:35.401630 [ 0.091760] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 13:52:35.413792 [ 0.102775] iommu: Default domain type: Translated Oct 3 13:52:35.413792 [ 0.102783] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 13:52:35.425827 [ 0.103751] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 13:52:35.425827 [ 0.104285] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 13:52:35.437758 [ 0.104297] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 13:52:35.437758 [ 0.104836] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 13:52:35.449634 [ 0.104866] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 13:52:35.461637 [ 0.105046] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 13:52:35.461637 [ 0.105397] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 13:52:35.473630 [ 0.105407] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 13:52:35.473630 [ 0.105803] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 13:52:35.473630 [ 0.106090] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 13:52:35.485633 [ 0.106099] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 13:52:35.485633 [ 0.106376] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 13:52:35.497663 [ 0.106477] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 13:52:35.497663 [ 0.106486] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 13:52:35.509727 [ 0.106685] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 13:52:35.509766 [ 0.106879] pps_core: LinuxPPS API ver. 1 registered Oct 3 13:52:35.521708 [ 0.106884] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 13:52:35.521749 [ 0.106900] PTP clock support registered Oct 3 13:52:35.533708 [ 0.108542] NetLabel: Initializing Oct 3 13:52:35.533740 [ 0.108549] NetLabel: domain hash size = 128 Oct 3 13:52:35.533766 [ 0.108555] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 13:52:35.545708 [ 0.108609] NetLabel: unlabeled traffic allowed by default Oct 3 13:52:35.545742 [ 0.108793] vgaarb: loaded Oct 3 13:52:35.545766 [ 0.109459] clocksource: Switched to clocksource mct-frc Oct 3 13:52:35.557662 [ 0.110097] VFS: Disk quotas dquot_6.6.0 Oct 3 13:52:35.557662 [ 0.110183] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 13:52:35.569725 [ 0.110928] AppArmor: AppArmor Filesystem Enabled Oct 3 13:52:35.569763 [ 0.121005] NET: Registered PF_INET protocol family Oct 3 13:52:35.581661 [ 0.121237] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 13:52:35.581661 [ 0.122840] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 13:52:35.593725 [ 0.122942] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 13:52:35.593762 [ 0.122967] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 13:52:35.605658 [ 0.123069] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 13:52:35.617667 [ 0.123299] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 13:52:35.617667 [ 0.123533] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 13:52:35.629735 [ 0.123625] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 13:52:35.629770 [ 0.123665] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 13:52:35.641713 [ 0.123873] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 13:52:35.641748 [ 0.123908] NET: Registered PF_XDP protocol family Oct 3 13:52:35.653665 [ 0.123919] PCI: CLS 0 bytes, default 64 Oct 3 13:52:35.653665 [ 0.125036] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 13:52:35.665725 [ 0.125296] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 13:52:35.677708 [ 0.129826] Trying to unpack rootfs image as initramfs... Oct 3 13:52:35.677743 [ 0.183897] Initialise system trusted keyrings Oct 3 13:52:35.677791 [ 0.184000] Key type blacklist registered Oct 3 13:52:35.689658 [ 0.184256] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 13:52:35.689658 [ 0.191666] zbud: loaded Oct 3 13:52:35.689658 [ 0.192718] integrity: Platform Keyring initialized Oct 3 13:52:35.701731 [ 0.192755] integrity: Machine keyring initialized Oct 3 13:52:35.701770 [ 0.192763] Key type asymmetric registered Oct 3 13:52:35.713706 [ 0.192770] Asymmetric key parser 'x509' registered Oct 3 13:52:35.713740 [ 1.499164] Freeing initrd memory: 25724K Oct 3 13:52:35.713766 [ 1.510451] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 13:52:35.725706 [ 1.510736] bounce: pool size: 64 pages Oct 3 13:52:35.725738 [ 1.510902] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 13:52:35.737715 [ 1.511066] io scheduler mq-deadline registered Oct 3 13:52:35.737747 [ 1.516204] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 13:52:35.749714 [ 1.536956] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 13:52:35.749751 [ 1.536969] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 13:52:35.761729 [ 1.539280] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 13:52:35.773666 [ 1.539290] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 13:52:35.785696 [ 1.540130] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 13:52:35.785739 [ 1.540140] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 13:52:35.797701 [ 1.540934] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 13:52:35.809731 [ 1.540944] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 13:52:35.809771 [ 1.543330] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 13:52:35.821720 [ 1.546188] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 13:52:35.833713 [ 1.548872] Serial: AMBA driver Oct 3 13:52:35.833745 [ 1.549113] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 13:52:35.845715 [ 1.549632] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 13:52:35.845754 [ 1.550105] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 13:52:35.857664 [ 2.688206] printk: console [ttySAC2] enabled Oct 3 13:52:35.857664 [ 2.693013] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 13:52:35.869733 [ 2.703681] STM32 USART driver initialized Oct 3 13:52:35.881652 [ 2.717816] mousedev: PS/2 mouse device common for all mice Oct 3 13:52:35.893675 [ 2.749115] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 13:52:35.917671 [ 2.757751] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T13:52:38 UTC (1727963558) Oct 3 13:52:35.929652 [ 2.767593] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 13:52:35.941697 [ 2.775045] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 13:52:35.953691 [ 2.783024] NET: Registered PF_INET6 protocol family Oct 3 13:52:35.953725 [ 2.796583] Segment Routing with IPv6 Oct 3 13:52:35.965662 [ 2.798854] In-situ OAM (IOAM) with IPv6 Oct 3 13:52:35.977709 [ 2.802822] mip6: Mobile IPv6 Oct 3 13:52:35.977741 [ 2.805657] NET: Registered PF_PACKET protocol family Oct 3 13:52:35.977768 [ 2.810809] mpls_gso: MPLS GSO support Oct 3 13:52:35.989720 [ 2.815060] ThumbEE CPU extension supported. Oct 3 13:52:35.989753 [ 2.818779] Registering SWP/SWPB emulation handler Oct 3 13:52:35.989779 [ 2.823910] registered taskstats version 1 Oct 3 13:52:36.001654 [ 2.827569] Loading compiled-in X.509 certificates Oct 3 13:52:36.001654 [ 3.287978] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 13:52:36.469712 [ 3.295321] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 13:52:36.481726 [ 3.306378] zswap: loaded using pool lzo/zbud Oct 3 13:52:36.481760 [ 3.310330] Key type .fscrypt registered Oct 3 13:52:36.481785 [ 3.313632] Key type fscrypt-provisioning registered Oct 3 13:52:36.493653 [ 3.327327] Key type encrypted registered Oct 3 13:52:36.505673 [ 3.329900] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 13:52:36.505673 [ 3.335426] ima: No TPM chip found, activating TPM-bypass! Oct 3 13:52:36.517711 [ 3.340821] ima: Allocated hash algorithm: sha256 Oct 3 13:52:36.517750 [ 3.345537] ima: No architecture policies found Oct 3 13:52:36.517776 [ 3.350069] evm: Initialising EVM extended attributes: Oct 3 13:52:36.529709 [ 3.355139] evm: security.selinux Oct 3 13:52:36.529742 [ 3.358434] evm: security.SMACK64 (disabled) Oct 3 13:52:36.529767 [ 3.362686] evm: security.SMACK64EXEC (disabled) Oct 3 13:52:36.541704 [ 3.367286] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 13:52:36.541738 [ 3.372321] evm: security.SMACK64MMAP (disabled) Oct 3 13:52:36.553711 [ 3.376926] evm: security.apparmor Oct 3 13:52:36.553743 [ 3.380307] evm: security.ima Oct 3 13:52:36.553767 [ 3.383258] evm: security.capability Oct 3 13:52:36.553791 [ 3.386817] evm: HMAC attrs: 0x1 Oct 3 13:52:36.565580 [ 3.974766] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 13:52:37.153676 [ 3.980745] clk: Disabling unused clocks Oct 3 13:52:37.153711 [ 3.994485] Freeing unused kernel image (initmem) memory: 2048K Oct 3 13:52:37.165694 [ 3.999358] Checked W+X mappings: passed, no W+X pages found Oct 3 13:52:37.177611 [ 4.004614] Run /init as init process Oct 3 13:52:37.177644 [ 4.570260] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 13:52:37.741701 [ 4.630616] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 13:52:37.813712 [ 4.638630] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 13:52:37.813751 [ 4.646093] usbcore: registered new interface driver usbfs Oct 3 13:52:37.825715 [ 4.646653] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 13:52:37.825754 [ 4.685694] usbcore: registered new interface driver hub Oct 3 13:52:37.861686 [ 4.696122] usbcore: registered new device driver usb Oct 3 13:52:37.873657 [ 4.712220] phy phy-12130000.phy.1: phy_power_on was called before phy_init Oct 3 13:52:37.885685 [ 4.730795] phy phy-12130000.phy.1: phy_power_on was called before phy_init Oct 3 13:52:37.909693 [ 4.736427] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 13:52:37.909727 [ 4.753932] exynos-ohci 12120000.usb: USB Host Controller Oct 3 13:52:37.933597 [ 4.777631] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Oct 3 13:52:37.957708 [ 4.779511] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 13:52:37.957742 [ 4.816918] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Oct 3 13:52:37.993723 [ 4.822253] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Oct 3 13:52:38.005657 [ 4.837888] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Oct 3 13:52:38.017711 [ 4.845118] usb3503 usb-hub: switched to HUB mode Oct 3 13:52:38.017745 [ 4.848413] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 13:52:38.029646 [ 4.873529] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 13:52:38.053706 [ 4.878389] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 13:52:38.053745 [ 4.886384] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 13:52:38.065710 [ 4.893583] usb usb2: Product: EHCI Host Controller Oct 3 13:52:38.065743 [ 4.898412] usb usb2: Manufacturer: Linux 6.1.0-25-armmp ehci_hcd Oct 3 13:52:38.077711 [ 4.904484] usb usb2: SerialNumber: 12110000.usb Oct 3 13:52:38.077744 [ 4.911424] hub 2-0:1.0: USB hub found Oct 3 13:52:38.089721 [ 4.913778] hub 2-0:1.0: 3 ports detected Oct 3 13:52:38.089755 [ 4.920574] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 13:52:38.101680 [ 4.927423] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 13:52:38.101717 [ 4.934602] usb usb1: Product: USB Host Controller Oct 3 13:52:38.113733 [ 4.939371] usb usb1: Manufacturer: Linux 6.1.0-25-armmp ohci_hcd Oct 3 13:52:38.113769 [ 4.945471] usb usb1: SerialNumber: 12120000.usb Oct 3 13:52:38.125644 [ 4.973151] hub 1-0:1.0: USB hub found Oct 3 13:52:38.149677 [ 4.982623] hub 1-0:1.0: 3 ports detected Oct 3 13:52:38.161645 [ 5.173580] usb 2-3: new high-speed USB device number 2 using exynos-ehci Oct 3 13:52:38.353653 [ 5.222891] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 13:52:38.401709 [ 5.226953] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 13:52:38.401747 [ 5.235097] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 13:52:38.413723 [ 5.243987] xhci-hcd xhci-hcd.2.auto: irq 108, io mem 0x12000000 Oct 3 13:52:38.425658 [ 5.253735] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 13:52:38.425692 [ 5.257782] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 13:52:38.437719 [ 5.265410] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 13:52:38.437754 [ 5.272099] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 13:52:38.449717 [ 5.280161] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 13:52:38.461721 [ 5.287371] usb usb3: Product: xHCI Host Controller Oct 3 13:52:38.461754 [ 5.292225] usb usb3: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 13:52:38.473732 [ 5.298296] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 13:52:38.473766 [ 5.303736] hub 3-0:1.0: USB hub found Oct 3 13:52:38.473791 [ 5.306950] hub 3-0:1.0: 1 port detected Oct 3 13:52:38.485716 [ 5.311421] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 13:52:38.485755 [ 5.319041] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 13:52:38.497716 [ 5.327129] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 13:52:38.509700 [ 5.334328] usb usb4: Product: xHCI Host Controller Oct 3 13:52:38.509733 [ 5.339191] usb usb4: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 13:52:38.521709 [ 5.345257] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 13:52:38.521743 [ 5.350524] usb 2-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Oct 3 13:52:38.533714 [ 5.358298] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 3 13:52:38.533749 [ 5.359450] hub 4-0:1.0: USB hub found Oct 3 13:52:38.545683 [ 5.369297] hub 4-0:1.0: 1 port detected Oct 3 13:52:38.545715 [ 5.369821] hub 2-3:1.0: USB hub found Oct 3 13:52:38.545741 [ 5.383937] hub 2-3:1.0: 3 ports detected Oct 3 13:52:38.557661 Starting system log daemon: syslogd, klogd. Oct 3 13:52:38.689651 /var/run/utmp: No such file or directory Oct 3 13:52:40.549756 [?1h=(B   Oct 3 13:52:40.585776  Oct 3 13:52:40.597784 [  (-*) ][ Oct 03 13:52 ] Oct 3 13:52:40.613821 [  (0*start) ][ Oct 03 13:52 ] Oct 3 13:52:40.625795 [  (0*start) ][ Oct 03 13:52 ] Oct 3 13:52:40.637794 [  (0*start) ][ Oct 03 13:52 ] Oct 3 13:52:40.649795 [  (0*start) ][ Oct 03 13:52 ]                        [  (0*start) ][ Oct 03 13:52 ][  (0*start) ][ Oct 03 13:52 ] Oct 3 13:52:40.709787 [ 0- start  (2*shell) ][ Oct 03 13:52 ] Oct 3 13:52:40.721783 [ 0- start  (2*shell) ][ Oct 03 13:52 ] Oct 3 13:52:40.733783 [ 0- start  (2*shell) ][ Oct 03 13:52 ] Oct 3 13:52:40.745782 [ 0- start  (2*shell) ][ Oct 03 13:52 ]                        [ 0- start  (2*shell) ][ Oct 03 13:52 ][ 0- start  (2*shell) ][ Oct 03 13:52 ] Oct 3 13:52:40.805779 [ 0 start 2- shell  (3*shell) ][ Oct 03 13:52 ] Oct 3 13:52:40.817776 [ 0 start 2- shell  (3*shell) ][ Oct 03 13:52 ] Oct 3 13:52:40.829804 [ 0 start 2- shell  (3*shell) ][ Oct 03 13:52 ] Oct 3 13:52:40.841799 [ 0 start 2- shell  (3*shell) ][ Oct 03 13:52 ]                        [ 0 start 2- shell  (3*shell) ][ Oct 03 13:52 ][ 0 start 2- shell  (3*shell) ][ Oct 03 13:52 ] Oct 3 13:52:40.901795 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 13:52 ] Oct 3 13:52:40.913773 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 13:52 ] Oct 3 13:52:40.925788 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 13:52 ] Oct 3 13:52:40.937808 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 13:52 ]                        [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 13:52 ][ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 13:52 ] Oct 3 13:52:40.997803 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 13:52 ] Oct 3 13:52:41.009795 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 13:52 ] Oct 3 13:52:41.021805 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 13:52 ] Oct 3 13:52:41.033778 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 13:52 ]                        [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 13:52 ][ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 13:52 ] Oct 3 13:52:41.093793 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 13:52 ] Oct 3 13:52:41.105775 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 13:52 ] Oct 3 13:52:41.117761 [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 13:52 ] Oct 3 13:52:41.585698 Detecting network hardware ... 2%... 95%... 100% Oct 3 13:52:43.308834 Detecting link on eth0; please wait... ... 0%... 10%... 20% Oct 3 13:52:48.204802 Waiting for link-local address... ... 8%... 16%... 25%... 33%... 41%... 50%... 100% Oct 3 13:52:49.748723 Attempting IPv6 autoconfiguration... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 75%... 83%... 91%... 100% Oct 3 13:52:55.817718 Configuring the network with DHCP ... 0%... 100%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 13:53 ] Oct 3 13:52:58.984982 Checking the Debian archive mirror ... 25%... 50%... 75%... 100% Oct 3 13:53:07.229751 Loading additional components ... 0%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Oct 3 13:53:40.349838 Setting up the clock ... 0%... 100% Oct 3 13:53:43.109585 Loading additional components ... 50%... 100% Oct 3 13:53:44.781603 Detecting disks and all other hardware ... 2%... 95%... 100% Oct 3 13:53:49.377708 Loading additional components ... 12%... 25%... 37%... 50%... 62%... 75%... 87%... 100% Oct 3 13:53:56.349685 Loading additional components ... 25%... 50%... 75%... 100% Oct 3 13:53:58.725712 Starting up the partitioner [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 13:54 ]... 4%... 13%... 21%... 30%... 43%... 52%... 60%... 73%... 82%... 91%... 100% Oct 3 13:54:12.049706 Guided partitioning ... 16%... 33%... 50%... 66%... 83%... 100% Oct 3 13:54:20.613694 Starting up the partitioner ... 4%... 12%... 20%... 32%... 40%... 52%... 60%... 72%... 80%... 92%... 100% Oct 3 13:54:31.549714 Partitions formatting ... 33% Oct 3 13:54:40.337747 Partitions formatting Partitions formatting Installing the base system ... 0%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 13:55 ]... 17%... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 13:56 ]... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 13:57 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 13:58 ]... 48%... 50%...  Oct 3 13:58:39.569752  60%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 13:59 ]... 70%... 79%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 14:00 ]... 83%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 14:01 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 14:02 ]... 91%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 14:03 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 14:04 ]... 100% Oct 3 14:04:21.148841 Configuring apt ... 7%... 14%... 14%... 21%... 35%... 42%... 50%... 60%... 71%. Oct 3 14:04:58.325734 ... 82%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 14:05 ]... 92%... 100% Oct 3 14:05:00.853726 Select and install software ... 1%... 10%... 13%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 14:06 ]... 20%... 30%... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 14:07 ]... 50%... Oct 3 14:07:51.085708 . 60%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 14:08 ]... 70%... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 14:09 ]... 88%... 90%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 14:10 ]... 94%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 14:11 ]... 100% Oct 3 14:11:02.605700 Finishing the installation ... 4%... 12%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 14:12 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 14:13 ]... 16%... 20%... 32%... 40%... 44%... Oct 3 14:13:15.237642  52%... 60%... 72%... 80%... 92% The system is going down NOW! Sent SIGKILL to all processes Oct 3 14:13:26.757762 Requesting system reboot Oct 3 14:13:26.757834 [ 1254.629570] reboot: Re˙ Oct 3 14:13:28.125790 Oct 3 14:13:28.125872 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 14:13:28.125939 Oct 3 14:13:28.126004 CPU: Exynos5250@1000MHz Oct 3 14:13:28.126077 Oct 3 14:13:28.126160 Board: Arndale Oct 3 14:13:28.137756 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 14:13:28.137842 ready Oct 3 14:13:28.137908 DRAM: 2 GiB Oct 3 14:13:28.137976 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 14:13:28.161723 trace: enabled Oct 3 14:13:28.197714 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 14:13:28.557689 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 14:13:28.617732 In: serial Oct 3 14:13:28.617787 Out: serial Oct 3 14:13:28.617828 Err: serial Oct 3 14:13:28.617868 SCSI: ARNDALE SCSI INIT Oct 3 14:13:28.617910 Target spinup took 0 ms. Oct 3 14:13:28.629744 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 14:13:28.629805 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 14:13:28.629855 Net: Net Initialization Skipped Oct 3 14:13:28.641750 No ethernet found. Oct 3 14:13:28.641805 Hostname: arndale-westfield Oct 3 14:13:28.641849 Hit any key to stop autoboot: 2  1  0 Oct 3 14:13:30.561714 (Re)start USB... Oct 3 14:13:30.561778 USB0: USB EHCI 1.00 Oct 3 14:13:30.573665 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 14:13:36.165756 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 14:13:36.177735 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 14:13:36.621639 Waiting for Ethernet connection... done. Oct 3 14:13:38.265688 BOOTP broadcast 1 Oct 3 14:13:38.265746 BOOTP broadcast 2 Oct 3 14:13:40.113744 DHCP client bound to address 10.149.64.45 (1927 ms) Oct 3 14:13:40.125770 Using asx0 device Oct 3 14:13:40.125825 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 14:13:40.125874 Filename 'pxelinux.0'. Oct 3 14:13:40.125916 Load address: 0x43e00000 Oct 3 14:13:40.125957 Loading: *### Oct 3 14:13:40.149733 2.2 MiB/s Oct 3 14:13:40.149787 done Oct 3 14:13:40.149827 Bytes transferred = 42430 (a5be hex) Oct 3 14:13:40.149871 missing environment variable: pxeuuid Oct 3 14:13:40.161762 Retrieving file: pxelinux.cfg/0A95402D Oct 3 14:13:40.161821 Using asx0 device Oct 3 14:13:40.161863 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 14:13:40.161911 Filename 'pxelinux.cfg/0A95402D'. Oct 3 14:13:40.173766 Load address: 0x51000000 Oct 3 14:13:40.173822 Loading: *# Oct 3 14:13:40.173863 31.3 KiB/s Oct 3 14:13:40.173904 done Oct 3 14:13:40.173942 Bytes transferred = 65 (41 hex) Oct 3 14:13:40.173985 Config file found Oct 3 14:13:40.185730 Ignoring unknown command: serial Oct 3 14:13:40.185787 1: local Oct 3 14:13:40.185828 scanning bus for devices... Oct 3 14:13:40.185871 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 14:13:40.221750 Type: Hard Disk Oct 3 14:13:40.221807 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 14:13:40.221857 Found 1 device(s). Oct 3 14:13:40.221899 Oct 3 14:13:40.221937 SCSI device 0: Oct 3 14:13:40.233757 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 14:13:40.233821 Type: Hard Disk Oct 3 14:13:40.233864 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 14:13:40.245731 ... is now current device Oct 3 14:13:40.245788 Scanning scsi 0... Oct 3 14:13:40.245830 Found U-Boot script /boot.scr Oct 3 14:13:40.365677 639 bytes read in 35 ms (17.6 KiB/s) Oct 3 14:13:40.401754 ## Executing script at 50000000 Oct 3 14:13:40.401811 Loading dtbs/exynos5250-arndale.dtb Oct 3 14:13:40.401856 46686 bytes read in 368 ms (123 KiB/s) Oct 3 14:13:40.773722 Loading vmlinuz-6.1.0-25-armmp-lpae Oct 3 14:13:40.785638 5509632 bytes read in 186 ms (28.2 MiB/s) Oct 3 14:13:40.977727 Loading initrd.img-6.1.0-25-armmp-lpae Oct 3 14:13:40.977786 25732139 bytes read in 2499 ms (9.8 MiB/s) Oct 3 14:13:43.405795 Booting Oct 3 14:13:43.405852 Kernel image @ 0x42000000 [ 0x000000 - 0x541200 ] Oct 3 14:13:43.405899 ## Flattened Device Tree blob at 43000000 Oct 3 14:13:43.405971 Booting using the fdt blob at 0x43000000 Oct 3 14:13:43.417783 Loading Ramdisk to 4e775000, end 4ffff42b ... OK Oct 3 14:13:43.825763 Loading Device Tree to 4e766000, end 4e77465d ... OK Oct 3 14:13:43.837786 Oct 3 14:13:43.837837 Starting kernel ...(fake run for tracing) Oct 3 14:13:43.849680 Oct 3 14:13:43.849731 Oct 3 14:13:43.849770 Starting kernel ... Oct 3 14:13:43.849811 Oct 3 14:13:43.849849 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 14:13:50.005792 [ 0.000000] Linux version 6.1.0-25-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.106-3 (2024-08-26) Oct 3 14:13:50.017788 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=30c5387d Oct 3 14:13:50.029762 [ 0.000000] CPU: div instructions available: patching division code Oct 3 14:13:50.029826 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 14:13:50.041764 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 14:13:50.053763 [ 0.000000] Memory policy: Data cache writealloc Oct 3 14:13:50.053824 [ 0.000000] efi: UEFI not found. Oct 3 14:13:50.053871 [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000 Oct 3 14:13:50.065762 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 14:13:50.065822 [ 0.000000] Zone ranges: Oct 3 14:13:50.065867 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 14:13:50.077765 [ 0.000000] Normal empty Oct 3 14:13:50.077824 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 14:13:50.077874 [ 0.000000] Movable zone start for each node Oct 3 14:13:50.089762 [ 0.000000] Early memory node ranges Oct 3 14:13:50.089821 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 14:13:50.101744 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 14:13:50.101809 [ 0.000000] percpu: Embedded 18 pages/cpu s44820 r8192 d20716 u73728 Oct 3 14:13:50.113765 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 14:13:50.113831 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=ttySAC2,115200n8 Oct 3 14:13:50.125790 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 14:13:50.137761 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 14:13:50.137830 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 14:13:50.149762 [ 0.000000] Memory: 2015504K/2097152K available (12288K kernel code, 1717K rwdata, 3748K rodata, 2048K init, 383K bss, 65264K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 14:13:50.161774 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 14:13:50.173760 [ 0.000000] ftrace: allocating 39996 entries in 118 pages Oct 3 14:13:50.173824 [ 0.000000] ftrace: allocated 118 pages with 5 groups Oct 3 14:13:50.185763 [ 0.000000] trace event string verifier disabled Oct 3 14:13:50.185825 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 14:13:50.197767 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 14:13:50.197834 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 14:13:50.197883 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 14:13:50.209754 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 14:13:50.209823 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 14:13:50.221775 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 14:13:50.221838 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 14:13:50.233754 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 14:13:50.233819 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 14:13:50.245783 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 14:13:50.245847 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 14:13:50.257783 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 14:13:50.269764 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 14:13:50.269831 [ 0.002627] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 14:13:50.281731 [ 0.002642] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 14:13:50.293769 [ 0.002657] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 14:13:50.305755 [ 0.002668] Ignoring duplicate/late registration of read_current_timer delay Oct 3 14:13:50.305820 [ 0.003036] Console: colour dummy device 80x30 Oct 3 14:13:50.317669 [ 0.003078] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 14:13:50.317710 [ 0.003092] CPU: Testing write buffer coherency: ok Oct 3 14:13:50.329765 [ 0.003133] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 14:13:50.341746 [ 0.003141] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 14:13:50.341811 [ 0.003148] pid_max: default: 32768 minimum: 301 Oct 3 14:13:50.341859 [ 0.003515] LSM: Security Framework initializing Oct 3 14:13:50.353729 [ 0.003589] landlock: Up and running. Oct 3 14:13:50.353788 [ 0.003594] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 14:13:50.365769 [ 0.003783] AppArmor: AppArmor initialized Oct 3 14:13:50.365829 [ 0.003795] TOMOYO Linux initialized Oct 3 14:13:50.365874 [ 0.003840] LSM support for eBPF active Oct 3 14:13:50.377750 [ 0.004088] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 14:13:50.377819 [ 0.004100] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 14:13:50.389750 [ 0.005514] /cpus/cpu@0 missing clock-frequency property Oct 3 14:13:50.389811 [ 0.005541] /cpus/cpu@1 missing clock-frequency property Oct 3 14:13:50.401778 [ 0.005554] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 14:13:50.401840 [ 0.006507] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 14:13:50.413757 [ 0.006514] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 14:13:50.413820 [ 0.006617] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 14:13:50.425773 [ 0.006622] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 14:13:50.425835 [ 0.006764] Setting up static identity map for 0x40400000 - 0x404000ac Oct 3 14:13:50.437755 [ 0.007923] rcu: Hierarchical SRCU implementation. Oct 3 14:13:50.437816 [ 0.007928] rcu: Max phase no-delay instances is 1000. Oct 3 14:13:50.449757 [ 0.010063] EFI services will not be available. Oct 3 14:13:50.449818 [ 0.010410] smp: Bringing up secondary CPUs ... Oct 3 14:13:50.461734 [ 0.011153] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 14:13:50.461769 [ 0.011166] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 14:13:50.473763 [ 0.011296] smp: Brought up 1 node, 2 CPUs Oct 3 14:13:50.473822 [ 0.011304] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 14:13:50.485746 [ 0.011311] CPU: All CPU(s) started in HYP mode. Oct 3 14:13:50.485807 [ 0.011315] CPU: Virtualization extensions available. Oct 3 14:13:50.497745 [ 0.012184] devtmpfs: initialized Oct 3 14:13:50.497804 [ 0.023161] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 14:13:50.497860 [ 0.023391] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 14:13:50.509798 [ 0.023416] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 14:13:50.521768 [ 0.023954] pinctrl core: initialized pinctrl subsystem Oct 3 14:13:50.521829 [ 0.024708] DMI not present or invalid. Oct 3 14:13:50.533768 [ 0.025382] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 14:13:50.533833 [ 0.026933] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 14:13:50.545717 [ 0.028456] audit: initializing netlink subsys (disabled) Oct 3 14:13:50.545779 [ 0.028655] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 Oct 3 14:13:50.557759 [ 0.029837] thermal_sys: Registered thermal governor 'fair_share' Oct 3 14:13:50.557821 [ 0.029844] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 14:13:50.569779 [ 0.029849] thermal_sys: Registered thermal governor 'step_wise' Oct 3 14:13:50.569842 [ 0.029854] thermal_sys: Registered thermal governor 'user_space' Oct 3 14:13:50.581768 [ 0.029859] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 14:13:50.581832 [ 0.030058] No ATAGs? Oct 3 14:13:50.581875 [ 0.030126] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 14:13:50.593763 [ 0.030134] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 14:13:50.605749 [ 0.031220] Serial: AMBA PL011 UART driver Oct 3 14:13:50.605809 [ 0.080596] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 14:13:50.617755 [ 0.087559] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 14:13:50.617826 [ 0.091761] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages Oct 3 14:13:50.629757 [ 0.091769] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page Oct 3 14:13:50.629821 [ 0.099298] iommu: Default domain type: Translated Oct 3 14:13:50.641758 [ 0.099306] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 14:13:50.641821 [ 0.100284] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 14:13:50.653759 [ 0.100796] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 14:13:50.653820 [ 0.100807] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 14:13:50.665739 [ 0.101323] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 14:13:50.665811 [ 0.101353] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 14:13:50.677776 [ 0.101599] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 14:13:50.689764 [ 0.102091] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 14:13:50.689824 [ 0.102101] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 14:13:50.701743 [ 0.102480] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 14:13:50.701805 [ 0.102771] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 14:13:50.701854 [ 0.102782] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 14:13:50.713772 [ 0.103075] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 14:13:50.713834 [ 0.103205] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 14:13:50.725755 [ 0.103214] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 14:13:50.725818 [ 0.103398] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 14:13:50.737752 [ 0.103615] pps_core: LinuxPPS API ver. 1 registered Oct 3 14:13:50.737814 [ 0.103620] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 14:13:50.749759 [ 0.103638] PTP clock support registered Oct 3 14:13:50.749817 [ 0.105132] NetLabel: Initializing Oct 3 14:13:50.749863 [ 0.105137] NetLabel: domain hash size = 128 Oct 3 14:13:50.761766 [ 0.105143] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 14:13:50.761829 [ 0.105197] NetLabel: unlabeled traffic allowed by default Oct 3 14:13:50.773771 [ 0.105370] vgaarb: loaded Oct 3 14:13:50.773829 [ 0.106288] clocksource: Switched to clocksource mct-frc Oct 3 14:13:50.773898 [ 0.106870] VFS: Disk quotas dquot_6.6.0 Oct 3 14:13:50.785760 [ 0.106956] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 14:13:50.785825 [ 0.107778] AppArmor: AppArmor Filesystem Enabled Oct 3 14:13:50.797758 [ 0.117734] NET: Registered PF_INET protocol family Oct 3 14:13:50.797819 [ 0.117932] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 14:13:50.809765 [ 0.119405] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 14:13:50.809835 [ 0.119506] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 14:13:50.821763 [ 0.119531] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 14:13:50.833763 [ 0.119631] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 14:13:50.833830 [ 0.119863] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 14:13:50.845751 [ 0.120094] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 14:13:50.845820 [ 0.120187] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 14:13:50.857765 [ 0.120227] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 14:13:50.869753 [ 0.120458] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 14:13:50.869817 [ 0.120493] NET: Registered PF_XDP protocol family Oct 3 14:13:50.869865 [ 0.120507] PCI: CLS 0 bytes, default 64 Oct 3 14:13:50.881751 [ 0.121005] Trying to unpack rootfs image as initramfs... Oct 3 14:13:50.881813 [ 0.121364] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 14:13:50.893767 [ 0.126801] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 14:13:50.905758 [ 0.194350] Initialise system trusted keyrings Oct 3 14:13:50.905818 [ 0.194423] Key type blacklist registered Oct 3 14:13:50.905864 [ 0.195649] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 14:13:50.917775 [ 0.203550] zbud: loaded Oct 3 14:13:50.917832 [ 0.204812] integrity: Platform Keyring initialized Oct 3 14:13:50.917880 [ 0.204855] integrity: Machine keyring initialized Oct 3 14:13:50.929761 [ 0.204865] Key type asymmetric registered Oct 3 14:13:50.929820 [ 0.204872] Asymmetric key parser 'x509' registered Oct 3 14:13:50.941755 [ 1.422660] Freeing initrd memory: 25132K Oct 3 14:13:50.941815 [ 1.444777] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 14:13:50.941866 [ 1.445043] bounce: pool size: 64 pages Oct 3 14:13:50.953764 [ 1.445227] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 14:13:50.953833 [ 1.445395] io scheduler mq-deadline registered Oct 3 14:13:50.965751 [ 1.450572] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 14:13:50.965822 [ 1.471530] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 14:13:50.977759 [ 1.471542] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 14:13:50.989814 [ 1.473834] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 14:13:50.989882 [ 1.473845] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 14:13:51.001791 [ 1.474693] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 14:13:51.013761 [ 1.474701] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 14:13:51.025756 [ 1.475518] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 14:13:51.025827 [ 1.475526] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 14:13:51.037743 [ 1.477828] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 14:13:51.049777 [ 1.480678] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 14:13:51.049843 [ 1.483442] Serial: AMBA driver Oct 3 14:13:51.049888 [ 1.483667] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 14:13:51.061772 [ 1.484142] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 14:13:51.073780 [ 1.484610] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 14:13:51.085760 [ 2.565332] printk: console [ttySAC2] enabled Oct 3 14:13:51.085819 [ 2.570170] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 14:13:51.097729 [ 2.580793] STM32 USART driver initialized Oct 3 14:13:51.097788 [ 2.595188] mousedev: PS/2 mouse device common for all mice Oct 3 14:13:51.121687 [ 2.626481] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 14:13:51.145721 [ 2.635086] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T14:13:51 UTC (1727964831) Oct 3 14:13:51.157774 [ 2.644927] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 14:13:51.169726 [ 2.652388] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 14:13:51.169790 [ 2.660389] NET: Registered PF_INET6 protocol family Oct 3 14:13:51.181726 [ 2.684424] Segment Routing with IPv6 Oct 3 14:13:51.205822 [ 2.686721] In-situ OAM (IOAM) with IPv6 Oct 3 14:13:51.205881 [ 2.690630] mip6: Mobile IPv6 Oct 3 14:13:51.205925 [ 2.693487] NET: Registered PF_PACKET protocol family Oct 3 14:13:51.217819 [ 2.698674] mpls_gso: MPLS GSO support Oct 3 14:13:51.217877 [ 2.702730] ThumbEE CPU extension supported. Oct 3 14:13:51.217925 [ 2.706521] Registering SWP/SWPB emulation handler Oct 3 14:13:51.229819 [ 2.711793] registered taskstats version 1 Oct 3 14:13:51.229878 [ 2.715397] Loading compiled-in X.509 certificates Oct 3 14:13:51.241748 [ 3.176035] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 14:13:51.697823 [ 3.183397] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 14:13:51.709840 [ 3.194569] zswap: loaded using pool lzo/zbud Oct 3 14:13:51.709899 [ 3.198378] Key type .fscrypt registered Oct 3 14:13:51.721785 [ 3.201663] Key type fscrypt-provisioning registered Oct 3 14:13:51.721846 [ 3.225858] Key type encrypted registered Oct 3 14:13:51.745817 [ 3.228457] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 14:13:51.745879 [ 3.233916] ima: No TPM chip found, activating TPM-bypass! Oct 3 14:13:51.757817 [ 3.239381] ima: Allocated hash algorithm: sha256 Oct 3 14:13:51.757877 [ 3.244100] ima: No architecture policies found Oct 3 14:13:51.769890 [ 3.248636] evm: Initialising EVM extended attributes: Oct 3 14:13:51.769951 [ 3.253682] evm: security.selinux Oct 3 14:13:51.769996 [ 3.256970] evm: security.SMACK64 (disabled) Oct 3 14:13:51.781756 [ 3.261221] evm: security.SMACK64EXEC (disabled) Oct 3 14:13:51.781817 [ 3.265822] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 14:13:51.781866 [ 3.270855] evm: security.SMACK64MMAP (disabled) Oct 3 14:13:51.793764 [ 3.275455] evm: security.apparmor Oct 3 14:13:51.793821 [ 3.278840] evm: security.ima Oct 3 14:13:51.793865 [ 3.281777] evm: security.capability Oct 3 14:13:51.805714 [ 3.285356] evm: HMAC attrs: 0x1 Oct 3 14:13:51.805772 [ 3.873062] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 14:13:52.393728 [ 3.879024] clk: Disabling unused clocks Oct 3 14:13:52.393793 [ 3.891868] Freeing unused kernel image (initmem) memory: 2048K Oct 3 14:13:52.417764 [ 3.896736] Checked W+X mappings: passed, no W+X pages found Oct 3 14:13:52.417831 [ 3.901987] Run /init as init process Oct 3 14:13:52.417877 Loading, please wait... Oct 3 14:13:52.461589 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 14:13:52.525683 [ 4.845320] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 14:13:53.365740 [ 4.857431] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 14:13:53.381739 [ 4.867019] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 14:13:53.393650 [ 4.891398] usbcore: registered new interface driver usbfs Oct 3 14:13:53.417581 [ 4.922431] usbcore: registered new interface driver hub Oct 3 14:13:53.441639 [ 4.926578] Synopsys Designware Multimedia Card Interface Driver Oct 3 14:13:53.453605 [ 4.938582] usbcore: registered new device driver usb Oct 3 14:13:53.453660 [ 4.944922] SCSI subsystem initialized Oct 3 14:13:53.465642 [ 4.950103] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 14:13:53.477616 [ 4.955941] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 14:13:53.477676 [ 4.967931] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 14:13:53.489640 [ 4.972986] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 14:13:53.489695 [ 4.990235] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 14:13:53.513713 [ 4.995263] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 14:13:53.513773 [ 5.015220] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 14:13:53.537684 [ 5.023939] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo Oct 3 14:13:53.549676 [ 5.038613] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo Oct 3 14:13:53.565713 [ 5.048206] mmc_host mmc0: card is polling. Oct 3 14:13:53.565767 [ 5.066357] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 14:13:53.589730 [ 5.078317] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 14:13:53.605697 [ 5.100404] phy phy-12130000.phy.1: phy_power_on was called before phy_init Oct 3 14:13:53.617682 [ 5.107149] phy phy-12130000.phy.1: phy_power_on was called before phy_init Oct 3 14:13:53.629719 [ 5.115859] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 14:13:53.645712 [ 5.122725] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 14:13:53.645775 [ 5.123318] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Oct 3 14:13:53.661684 [ 5.136985] exynos-ehci 12110000.usb: irq 109, io mem 0x12110000 Oct 3 14:13:53.661740 [ 5.150333] exynos-ohci 12120000.usb: USB Host Controller Oct 3 14:13:53.673666 [ 5.162466] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Oct 3 14:13:53.685785 [ 5.162957] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 14:13:53.685842 [ 5.169195] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 14:13:53.701756 [ 5.185683] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 14:13:53.713676 [ 5.198055] exynos-ohci 12120000.usb: irq 109, io mem 0x12120000 Oct 3 14:13:53.713733 [ 5.198549] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 14:13:53.729754 [ 5.203910] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 14:13:53.729819 [ 5.209678] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Oct 3 14:13:53.741749 [ 5.217913] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 14:13:53.757692 [ 5.226747] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 14:13:53.757762 [ 5.233949] usb usb1: Product: EHCI Host Controller Oct 3 14:13:53.769641 [ 5.247957] usb usb1: Manufacturer: Linux 6.1.0-25-armmp-lpae ehci_hcd Oct 3 14:13:53.769703 [ 5.254436] usb usb1: SerialNumber: 12110000.usb Oct 3 14:13:53.769747 [ 5.259057] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 14:13:53.781688 [ 5.283382] mmc1: new high speed SDHC card at address aaaa Oct 3 14:13:53.805628 [ 5.291666] hub 1-0:1.0: USB hub found Oct 3 14:13:53.805684 [ 5.294008] hub 1-0:1.0: 3 ports detected Oct 3 14:13:53.821633 [ 5.300716] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Oct 3 14:13:53.821690 [ 5.310929] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 14:13:53.833658 [ 5.322324] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 14:13:53.849685 [ 5.329175] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 14:13:53.849750 [ 5.336344] usb usb2: Product: USB Host Controller Oct 3 14:13:53.861647 [ 5.341124] usb usb2: Manufacturer: Linux 6.1.0-25-armmp-lpae ohci_hcd Oct 3 14:13:53.861708 [ 5.347625] usb usb2: SerialNumber: 12120000.usb Oct 3 14:13:53.873610 [ 5.354752] mmc0: new DDR MMC card at address 0001 Oct 3 14:13:53.873664 [ 5.363450] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Oct 3 14:13:53.885589 [ 5.379189] mmcblk0: p1 p2 p3 p4 Oct 3 14:13:53.897583 [ 5.389523] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Oct 3 14:13:53.909600 [ 5.402442] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Oct 3 14:13:53.921607 [ 5.410489] scsi host0: ahci-dwc Oct 3 14:13:53.933636 [ 5.412639] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (241:0) Oct 3 14:13:53.933692 [ 5.412690] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 110 Oct 3 14:13:53.949679 [ 5.435253] hub 2-0:1.0: USB hub found Oct 3 14:13:53.949731 [ 5.440174] hub 2-0:1.0: 3 ports detected Oct 3 14:13:53.961579 [ 5.660612] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 14:13:54.189700 [ 5.734834] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 14:13:54.261723 [ 5.843272] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 14:13:54.365663 [ 5.902358] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 14:13:54.421678 [ 5.907972] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 14:13:54.433707 [ 5.913774] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 14:13:54.433773 [ 5.921273] ata1.00: configured for UDMA/133 Oct 3 14:13:54.445664 [ 5.924963] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 14:13:54.445734 [ 5.951291] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 14:13:54.469735 [ 5.996962] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 14:13:54.517751 [ 6.001055] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 14:13:54.529740 [ 6.009426] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 14:13:54.529810 [ 6.018080] xhci-hcd xhci-hcd.2.auto: irq 111, io mem 0x12000000 Oct 3 14:13:54.541728 [ 6.024225] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 14:13:54.541789 [ 6.029496] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 14:13:54.553729 [ 6.037131] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 14:13:54.565739 [ 6.043799] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 14:13:54.565810 [ 6.051894] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 14:13:54.577747 [ 6.059097] usb usb3: Product: xHCI Host Controller Oct 3 14:13:54.577807 [ 6.063992] usb usb3: Manufacturer: Linux 6.1.0-25-armmp-lpae xhci-hcd Oct 3 14:13:54.589675 [ 6.070468] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 14:13:54.589736 [ 6.075385] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 14:13:54.601751 [ 6.086560] hub 3-0:1.0: USB hub found Oct 3 14:13:54.601811 [ 6.089069] hub 3-0:1.0: 1 port detected Oct 3 14:13:54.613657 [ 6.094244] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 14:13:54.613727 [ 6.101147] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 14:13:54.625677 [ 6.109162] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 14:13:54.637891 [ 6.116378] usb usb4: Product: xHCI Host Controller Oct 3 14:13:54.637959 [ 6.121208] usb usb4: Manufacturer: Linux 6.1.0-25-armmp-lpae xhci-hcd Oct 3 14:13:54.649756 [ 6.127718] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 14:13:54.649816 [ 6.137926] hub 4-0:1.0: USB hub found Oct 3 14:13:54.661774 [ 6.140299] hub 4-0:1.0: 1 port detected Oct 3 14:13:54.661831 [ 6.142121] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 14:13:54.673807 [ 6.151612] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 14:13:54.673869 [ 6.157012] sd 0:0:0:0: [sda] Write Protect is off Oct 3 14:13:54.673918 [ 6.161683] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 14:13:54.685815 [ 6.171387] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 14:13:54.697628 [ 6.184721] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 14:13:54.709738 [ 6.192663] sda: sda1 sda2 < sda5 > Oct 3 14:13:54.709794 [ 6.196787] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 14:13:54.721598 [ 6.292719] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 14:13:54.817682 [ 6.400701] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 14:13:54.925729 [ 6.508677] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 14:13:55.033747 [ 6.616661] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 14:13:55.141738 [ 7.025193] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 14:13:55.549654 [ 7.132794] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 14:13:55.657718 [ 7.210308] random: crng init done Oct 3 14:13:55.729694 [ 7.319582] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. Oct 3 14:13:55.849730 [ 7.330443] device-mapper: uevent: version 1.0.3 Oct 3 14:13:55.849794 [ 7.335139] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Oct 3 14:13:55.861675 [ 7.740898] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 14:13:56.257754 Begin: Loading essential drivers ... done. Oct 3 14:13:56.533695 Begin: Running /scripts/init-premount ... done. Oct 3 14:13:59.548874 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 14:13:59.560843 Begin: Running /scripts/local-premount ... done. Oct 3 14:13:59.596813 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 14:13:59.644807 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 14:13:59.728840 /dev/mapper/arndale--westfield--vg-root: clean, 39343/1220608 files, 378259/4882432 blocks Oct 3 14:13:59.936942 done. Oct 3 14:13:59.960983 [ 11.548582] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 14:14:00.068851 [ 11.742555] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 14:14:00.273004 done. Oct 3 14:14:00.273055 Begin: Running /scripts/local-bottom ... done. Oct 3 14:14:00.321021 Begin: Running /scripts/init-bottom ... done. Oct 3 14:14:00.356966 [ 12.053355] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. Oct 3 14:14:00.584993 INIT: version 3.06 booting Oct 3 14:14:00.876953 INIT: No inittab.d directory found Oct 3 14:14:00.960979 Using makefile-style concurrent boot in runlevel S. Oct 3 14:14:01.312813 Starting hotplug events dispatcher: systemd-udevd. Oct 3 14:14:02.984827 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 14:14:03.204966 Synthesizing the initial hotplug events (devices)...done. Oct 3 14:14:03.736996 Waiting for /dev to be fully populated...[ 15.406339] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 14:14:03.932998 [ 15.417905] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Oct 3 14:14:03.945015 [ 15.559967] panfrost 11800000.gpu: clock rate = 533000000 Oct 3 14:14:04.088966 [ 15.590917] panfrost 11800000.gpu: mali-t600 id 0x600 major 0x0 minor 0x0 status 0x1 Oct 3 14:14:04.113039 [ 15.597275] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,31b4dfff Oct 3 14:14:04.125055 [ 15.605379] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 Oct 3 14:14:04.136961 [ 15.617148] panfrost 11800000.gpu: shader_present=0xf l2_present=0x1 Oct 3 14:14:04.152966 [ 15.656128] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 0 Oct 3 14:14:04.177015 [ 15.666171] sd 0:0:0:0: Attached scsi generic sg0 type 0 Oct 3 14:14:04.188997 [ 15.766211] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 14:14:04.296991 [ 15.830342] usb3503 usb-hub: switched to HUB mode Oct 3 14:14:04.357017 [ 15.833614] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 14:14:04.357081 [ 15.843501] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 14:14:04.369031 [ 15.954088] blk_print_req_error: 6 callbacks suppressed Oct 3 14:14:04.481036 [ 15.954100] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 14:14:04.481111 [ 16.067458] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 14:14:04.600969 [ 16.154466] usb 1-3: new high-speed USB device number 2 using exynos-ehci Oct 3 14:14:04.684964 [ 16.175682] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 14:14:04.708958 [ 16.283677] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 14:14:04.816964 [ 16.318910] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Oct 3 14:14:04.841040 [ 16.325713] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 3 14:14:04.853008 [ 16.344547] hub 1-3:1.0: USB hub found Oct 3 14:14:04.864989 [ 16.350725] hub 1-3:1.0: 3 ports detected Oct 3 14:14:04.876973 [ 16.391682] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 14:14:04.924964 [ 16.435273] OF: graph: no port node found in /soc/hdmi@14530000 Oct 3 14:14:04.961000 [ 16.499778] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 14:14:05.032954 [ 16.607965] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 14:14:05.140530 [ 16.654381] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 14:14:05.176856 [ 16.716227] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 14:14:05.248800 [ 16.780453] usb 1-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=77.32 Oct 3 14:14:05.308829 [ 16.787499] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Oct 3 14:14:05.308829 [ 16.794978] usb 1-3.2: Product: USB2.0 Hub Oct 3 14:14:05.320852 [ 16.803265] hub 1-3.2:1.0: USB hub found Oct 3 14:14:05.320852 [ 16.806447] hub 1-3.2:1.0: 4 ports detected Oct 3 14:14:05.332824 [ 17.110544] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 14:14:05.632979 [ 17.126177] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 14:14:05.656828 [ 17.224775] usb 1-3.2.4: New USB device found, idVendor=0b95, idProduct=772a, bcdDevice= 0.01 Oct 3 14:14:05.752885 [ 17.232110] usb 1-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Oct 3 14:14:05.764959 [ 17.239649] usb 1-3.2.4: Product: AX88772 Oct 3 14:14:05.764959 [ 17.243607] usb 1-3.2.4: Manufacturer: ASIX Elec. Corp. Oct 3 14:14:05.764959 [ 17.248809] usb 1-3.2.4: SerialNumber: 000001 Oct 3 14:14:05.776820 [ 17.253199] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 14:14:05.776820 [ 17.591815] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 14:14:06.124799 [ 17.864121] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 14:14:06.388845 [ 18.256963] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 14:14:06.784853 [ 18.272503] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Oct 3 14:14:06.796961 [ 18.284367] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 2a:98:8f:64:74:3e Oct 3 14:14:06.808850 [ 18.302932] usbcore: registered new interface driver asix Oct 3 14:14:06.820798 done. Oct 3 14:14:07.096822 [ 19.057752] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 14:14:07.580940 Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). Oct 3 14:14:07.616869 Checking file systems.../dev/sda1: clean, 922/61056 files, 25401/243968 blocks Oct 3 14:14:09.352822 done. Oct 3 14:14:09.400908 Cleaning up temporary files... /tmp. Oct 3 14:14:09.608813 [ 21.315574] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 14:14:09.836991 [ 21.364389] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 14:14:09.884867 [ 21.615766] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k FS Oct 3 14:14:10.148883 Mounting local filesystems...done. Oct 3 14:14:10.508784 Activating swapfile swap, if any...done. Oct 3 14:14:10.520828 Cleaning up temporary files.... Oct 3 14:14:10.568810 Starting Setting kernel variables: sysctl. Oct 3 14:14:10.772794 [ 22.786243] audit: type=1400 audit(1727964851.348:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=897 comm="apparmor_parser" Oct 3 14:14:11.324838 [ 22.805671] audit: type=1400 audit(1727964851.364:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=896 comm="apparmor_parser" Oct 3 14:14:11.336882 [ 22.819207] audit: type=1400 audit(1727964851.368:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=897 comm="apparmor_parser" Oct 3 14:14:11.348867 [ 23.110612] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 14:14:11.636842 [ 23.153074] audit: type=1400 audit(1727964851.716:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=930 comm="apparmor_parser" Oct 3 14:14:11.684894 [ 23.167724] audit: type=1400 audit(1727964851.720:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=930 comm="apparmor_parser" Oct 3 14:14:11.696874 [ 23.181635] audit: type=1400 audit(1727964851.720:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=930 comm="apparmor_parser" Oct 3 14:14:11.720819 [ 23.510203] audit: type=1400 audit(1727964852.072:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=929 comm="apparmor_parser" Oct 3 14:14:12.044888 [ 23.530474] audit: type=1400 audit(1727964852.076:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=929 comm="apparmor_parser" Oct 3 14:14:12.068956 [ 23.546342] audit: type=1400 audit(1727964852.080:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=929 comm="apparmor_parser" Oct 3 14:14:12.080924 [ 23.563875] audit: type=1400 audit(1727964852.088:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=929 comm="apparmor_parser" Oct 3 14:14:12.104887 Starting: AppArmorLoading AppArmor profiles...done. Oct 3 14:14:12.104887 . Oct 3 14:14:12.104887 [ 25.288166] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 14:14:13.812914 [ 25.288268] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 3 14:14:13.824845 Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1 Oct 3 14:14:15.177806 Copyright 2004-2022 Internet Systems Consortium. Oct 3 14:14:15.177891 All rights reserved. Oct 3 14:14:15.177935 For info, please visit https://www.isc.org/software/dhcp/ Oct 3 14:14:15.189751 Oct 3 14:14:15.189802 Listening on LPF/eth0/a6:46:13:77:e8:2f Oct 3 14:14:15.189849 Sending on LPF/eth0/a6:46:13:77:e8:2f Oct 3 14:14:15.189893 Sending on Socket/fallback Oct 3 14:14:15.189934 Created duid "\000\001\000\001.\221c3\246F\023w\350/". Oct 3 14:14:15.201742 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 Oct 3 14:14:15.201804 [ 28.385651] exynos4-fb 14400000.fimd: deferred probe timeout, ignoring dependency Oct 3 14:14:16.912864 [ 28.396739] exynos-mixer 14450000.mixer: deferred probe timeout, ignoring dependency Oct 3 14:14:16.924872 [ 28.404488] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations Oct 3 14:14:16.924872 [ 28.410870] exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm]) Oct 3 14:14:16.936869 [ 28.419308] exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm]) Oct 3 14:14:16.948873 [ 28.428934] exynos-drm exynos-drm: bound 14500000.dsi (ops hdmi_enable [exynosdrm]) Oct 3 14:14:16.948873 [ 28.435778] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm]) Oct 3 14:14:16.960862 [ 28.456549] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 14:14:16.984861 [ 28.461780] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 14:14:16.984861 [ 28.472698] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 Oct 3 14:14:16.996851 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 Oct 3 14:14:17.932850 DHCPOFFER of 10.149.64.45 from 10.149.64.4 Oct 3 14:14:17.932850 DHCPREQUEST for 10.149.64.45 on eth0 to 255.255.255.255 port 67 Oct 3 14:14:17.932850 DHCPACK of 10.149.64.45 from 10.149.64.4 Oct 3 14:14:17.944856 bound to 10.149.64.45 -- renewal in 288 seconds. Oct 3 14:14:17.944856 done. Oct 3 14:14:17.944856 Cleaning up temporary files.... Oct 3 14:14:17.980822 Starting nftables: none Oct 3 14:14:18.052827 . Oct 3 14:14:18.508808 INIT: Entering runlevel: 2 Oct 3 14:14:18.568803 Using makefile-style concurrent boot in runlevel 2. Oct 3 14:14:18.640956 Starting Apache httpd web server: apache2. Oct 3 14:14:20.664934 Starting NTP server: ntpd2024-10-03T14:14:21 ntpd[1132]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 14:14:21.029055 2024-10-03T14:14:21 ntpd[1132]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 14:14:21.041025 . Oct 3 14:14:21.041076 Starting periodic command scheduler: cron. Oct 3 14:14:21.053002 Starting system message bus: dbus. Oct 3 14:14:21.388843 Starting OpenBSD Secure Shell server: sshd. Oct 3 14:14:22.256841 Oct 3 14:14:23.312848 Debian GNU/Linux 12 arndale-westfield ttySAC2 Oct 3 14:14:23.312848 Oct 3 14:14:23.312848 arndale-westfield login: INIT: Switching to r INIT: No inittab.d directorUsing makefile-style concurrent boot in runlevel 6. Oct 3 14:19:51.320777 Stopping libvirt management daemon: libvirtdNo /usr/local/sbin/libvirtd found running; none killed. Oct 3 14:19:51.368808 . Oct 3 14:19:51.368808 Stopping hotplug events dispatcher: systemd-udevd. Oct 3 14:19:51.396813 Stopping SMP IRQ Balancer: irqbalance. Oct 3 14:19:51.396813 Stopping nftables: none. Oct 3 14:19:51.408734 Saving the system clock to /dev/rtc0. Oct 3 14:19:52.044800 Hardware Clock updated to Thu Oct 3 14:19:52 UTC 2024. Oct 3 14:19:52.044800 Stopping Apache httpd web server: apache2. Oct 3 14:19:52.548770 Asking all remaining processes to terminate...done. Oct 3 14:19:52.876805 All processes ended within 1 seconds...done. Oct 3 14:19:52.888754 Deconfiguring network interfaces...ifdown: ignoring unknown interface eth0=eth0 Oct 3 14:19:53.032766 done. Oct 3 14:19:53.032766 [ 364.721548] EXT4-fs (sda1): unmounting filesystem. Oct 3 14:19:53.236886 Deactivating swap...done. Oct 3 14:19:53.296867 Unmounting local filesystems...done. Oct 3 14:19:53.296867 [ 365.052254] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 14:19:53.572888 Will now restart. Oct 3 14:19:53.848868 [ 365.349395] asix 1-3.2.4:1.0 eth0: Link is Down Oct 3 14:19:53.872870 [ 365.423112] sd 0:0:0:0: [sda] Synchronizing SCSI cache Oct 3 14:19:53.944913 [ 365.431103] wake enabled for irq 101 (gpx1-4) Oct 3 14:19:53.944913 [ 365.433993] wake enabled for irq 102 (gpx1-5) Oct 3 14:19:53.956910 [ 365.438354] wake enabled for irq 103 (gpx1-6) Oct 3 14:19:53.956910 [ 365.442688] wake enabled for irq 104 (gpx1-7) Oct 3 14:19:53.968927 [ 365.447028] wake enabled for irq 105 (gpx2-0) Oct 3 14:19:53.968927 [ 365.451374] wake enabled for irq 106 (gpx2-1) Oct 3 14:19:53.968927 [ 365.456197] reboot: Reó Oct 3 14:19:54.304871 Oct 3 14:19:54.304871 Oct 3 14:19:54.304871 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 14:19:54.317002 Oct 3 14:19:54.317068 CPU: Exynos5250@1000MHz Oct 3 14:19:54.317068 Oct 3 14:19:54.317068 Board: Arndale Oct 3 14:19:54.317068 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 14:19:54.328871 ready Oct 3 14:19:54.328871 DRAM: 2 GiB Oct 3 14:19:54.328871 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 14:19:54.340893 trace: enabled Oct 3 14:19:54.376872 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 14:19:54.736876 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 14:19:54.796913 In: serial Oct 3 14:19:54.796913 Out: serial Oct 3 14:19:54.796913 Err: serial Oct 3 14:19:54.796913 SCSI: ARNDALE SCSI INIT Oct 3 14:19:54.808908 Target spinup took 0 ms. Oct 3 14:19:54.808908 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 14:19:54.820919 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 14:19:54.820919 Net: Net Initialization Skipped Oct 3 14:19:54.820919 No ethernet found. Oct 3 14:19:54.820919 Hostname: arndale-westfield Oct 3 14:19:54.833042 Hit any key to stop autoboot: 2  1  0 Oct 3 14:19:56.753041 (Re)start USB... Oct 3 14:19:56.785767 USB0: USB EHCI 1.00 Oct 3 14:19:56.785848 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 14:20:02.352907 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 14:20:02.364897 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 14:20:02.808888 Waiting for Ethernet connection... done. Oct 3 14:20:04.640874 BOOTP broadcast 1 Oct 3 14:20:04.652934 BOOTP broadcast 2 Oct 3 14:20:08.961451 DHCP client bound to address 10.149.64.45 (4497 ms) Oct 3 14:20:08.961451 Using asx0 device Oct 3 14:20:08.961451 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 14:20:08.976936 Filename 'pxelinux.0'. Oct 3 14:20:08.976936 Load address: 0x43e00000 Oct 3 14:20:08.977242 Loading: *### Oct 3 14:20:08.988488 2.2 MiB/s Oct 3 14:20:08.999860 done Oct 3 14:20:08.999860 Bytes transferred = 42430 (a5be hex) Oct 3 14:20:08.999860 missing environment variable: pxeuuid Oct 3 14:20:09.001250 Retrieving file: pxelinux.cfg/0A95402D Oct 3 14:20:09.001250 Using asx0 device Oct 3 14:20:09.009553 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 14:20:09.009553 Filename 'pxelinux.cfg/0A95402D'. Oct 3 14:20:09.009553 Load address: 0x51000000 Oct 3 14:20:09.023948 Loading: *# Oct 3 14:20:09.023948 31.3 KiB/s Oct 3 14:20:09.023948 done Oct 3 14:20:09.023948 Bytes transferred = 65 (41 hex) Oct 3 14:20:09.023948 Config file found Oct 3 14:20:09.025238 Ignoring unknown command: serial Oct 3 14:20:09.025243 1: local Oct 3 14:20:09.025243 scanning bus for devices... Oct 3 14:20:09.033522 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 14:20:09.059743 Type: Hard Disk Oct 3 14:20:09.059743 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 14:20:09.059743 Found 1 device(s). Oct 3 14:20:09.070241 Oct 3 14:20:09.070241 SCSI device 0: Oct 3 14:20:09.070241 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 14:20:09.070241 Type: Hard Disk Oct 3 14:20:09.070241 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 14:20:09.084765 ... is now current device Oct 3 14:20:09.084765 Scanning scsi 0... Oct 3 14:20:09.084765 Found U-Boot script /boot.scr Oct 3 14:20:09.263322 1760 bytes read in 44 ms (39.1 KiB/s) Oct 3 14:20:09.312885 ## Executing script at 50000000 Oct 3 14:20:09.312885 Loading dtbs/6.12.0-rc1+/exynos5250-arndale.dtb Oct 3 14:20:09.323125 46641 bytes read in 4299 ms (9.8 KiB/s) Oct 3 14:20:13.465602 1015824 bytes read in 104 ms (9.3 MiB/s) Oct 3 14:20:13.597695 Loaded xen-4.20-unstable to 0x41000000 (f8010) Oct 3 14:20:13.597714 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan Oct 3 14:20:13.613614 10912256 bytes read in 474 ms (22 MiB/s) Oct 3 14:20:14.081577 Loaded vmlinuz-6.12.0-rc1+ to 0x42000000 (a68200) Oct 3 14:20:14.093620 command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 14:20:14.105623 12163773 bytes read in 561 ms (20.7 MiB/s) Oct 3 14:20:14.669606 Loaded initrd.img-6.12.0-rc1+ to 0x43300000 (b99abd) Oct 3 14:20:14.681628 chosen { Oct 3 14:20:14.681649 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan"; Oct 3 14:20:14.693716 #size-cells = <0x00000001>; Oct 3 14:20:14.693759 #address-cells = <0x00000001>; Oct 3 14:20:14.693767 stdout-path = "serial2:115200n8"; Oct 3 14:20:14.693767 module@1 { Oct 3 14:20:14.693771 reg = <0x43300000 0x00b99abd>; Oct 3 14:20:14.705624 compatible = "xen,linux-initrd", "xen,multiboot-module"; Oct 3 14:20:14.705651 }; Oct 3 14:20:14.705673 module@0 { Oct 3 14:20:14.705695 bootargs = "ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Oct 3 14:20:14.729628 reg = <0x42000000 0x00a68200>; Oct 3 14:20:14.729651 compatible = "xen,linux-zimage", "xen,multiboot-module"; Oct 3 14:20:14.729678 }; Oct 3 14:20:14.729699 }; Oct 3 14:20:14.729719 Booting 0x41000000 - 0x43000000 Oct 3 14:20:14.741629 Kernel image @ 0x41000000 [ 0x000000 - 0x135000 ] Oct 3 14:20:14.741649 ## Flattened Device Tree blob at 43000000 Oct 3 14:20:14.741674 Booting using the fdt blob at 0x43000000 Oct 3 14:20:14.753628 reserving fdt memory region: addr=43000000 size=c000 Oct 3 14:20:14.753652 Loading Device Tree to 4fff1000, end 4fffffff ... OK Oct 3 14:20:14.753679 Oct 3 14:20:14.765592 Starting kernel ...(fake run for tracing) Oct 3 14:20:14.765632 Oct 3 14:20:14.765654 Oct 3 14:20:14.765675 Starting kernel ... Oct 3 14:20:14.765697 Oct 3 14:20:14.765717 __ __ _ _ ____ ___ _ _ _ Oct 3 14:20:14.825634 \ \/ /___ _ __ | || | |___ \ / _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Oct 3 14:20:14.825654 \ // _ \ '_ \ | || |_ __) | | | |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Oct 3 14:20:14.837627 / \ __/ | | | |__ _| / __/| |_| |__| |_| | | | \__ \ || (_| | |_) | | __/ Oct 3 14:20:14.837651 /_/\_\___|_| |_| |_|(_)_____|\___/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Oct 3 14:20:14.849625 Oct 3 14:20:14.849648 (XEN) Xen version 4.20-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Thu Oct 3 10:39:40 UTC 2024 Oct 3 14:20:14.861629 (XEN) Latest ChangeSet: Wed Oct 2 08:59:03 2024 +0200 git:b102c9f1ce-dirty Oct 3 14:20:14.873634 (XEN) build-id: a7636014d8eed2b092ba500c116331cd73847646 Oct 3 14:20:14.873652 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Oct 3 14:20:14.885619 (XEN) 32-bit Execution: Oct 3 14:20:14.885635 (XEN) Processor Features: 00001031:00011011 Oct 3 14:20:14.885661 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Oct 3 14:20:14.897628 (XEN) Extensions: GenericTimer Security Oct 3 14:20:14.897652 (XEN) Debug Features: 02010555 Oct 3 14:20:14.897677 (XEN) Auxiliary Features: 00000000 Oct 3 14:20:14.897775 (XEN) Memory Model Features: 10201105 20000000 Oct 3 14:20:14.909632 (XEN) 01240000 02102211 Oct 3 14:20:14.909650 (XEN) ISA Features: 02101110 13112111 21232041 Oct 3 14:20:14.909676 (XEN) 11112131 10011142 00000000 Oct 3 14:20:14.921633 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Oct 3 14:20:14.933632 (XEN) Set SYSRAM to 0000000041000070 (00200070) Oct 3 14:20:14.933657 (XEN) SMP: Allowing 2 CPUs Oct 3 14:20:14.933681 (XEN) enabled workaround for: ARM erratum 766422 Oct 3 14:20:14.945622 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Oct 3 14:20:14.945666 (XEN) GICv2 initialization: Oct 3 14:20:14.945666 (XEN) gic_dist_addr=0000000010481000 Oct 3 14:20:14.957652 (XEN) gic_cpu_addr=0000000010482000 Oct 3 14:20:14.957684 (XEN) gic_hyp_addr=0000000010484000 Oct 3 14:20:14.957709 (XEN) gic_vcpu_addr=0000000010486000 Oct 3 14:20:14.969665 (XEN) gic_maintenance_irq=25 Oct 3 14:20:14.969697 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Oct 3 14:20:14.969724 (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2) Oct 3 14:20:14.981672 (XEN) Initializing Credit2 scheduler Oct 3 14:20:14.981704 (XEN) load_precision_shift: 18 Oct 3 14:20:14.981728 (XEN) load_window_shift: 30 Oct 3 14:20:14.981751 (XEN) underload_balance_tolerance: 0 Oct 3 14:20:14.993673 (XEN) overload_balance_tolerance: -3 Oct 3 14:20:14.993704 (XEN) runqueues arrangement: socket Oct 3 14:20:14.993729 (XEN) cap enforcement granularity: 10ms Oct 3 14:20:15.005671 (XEN) load tracking window length 1073741824 ns Oct 3 14:20:15.005704 (XEN) Allocated console ring of 16 KiB. Oct 3 14:20:15.005729 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Oct 3 14:20:15.017672 (XEN) CPU0: Guest atomics will try 2 times before pausing the domain Oct 3 14:20:15.017707 (XEN) Bringing up CPU1 Oct 3 14:20:15.017731 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Oct 3 14:20:15.029679 (XEN) Brought up 2 CPUs Oct 3 14:20:15.029709 (XEN) CPU 1 booted. Oct 3 14:20:15.029732 (XEN) I/O virtualisation disabled Oct 3 14:20:15.041669 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Oct 3 14:20:15.041703 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Oct 3 14:20:15.041729 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Oct 3 14:20:15.053670 (XEN) Initializing Credit2 scheduler Oct 3 14:20:15.053714 (XEN) load_precision_shift: 18 Oct 3 14:20:15.053740 (XEN) load_window_shift: 30 Oct 3 14:20:15.065669 (XEN) underload_balance_tolerance: 0 Oct 3 14:20:15.065701 (XEN) overload_balance_tolerance: -3 Oct 3 14:20:15.065726 (XEN) runqueues arrangement: socket Oct 3 14:20:15.065750 (XEN) cap enforcement granularity: 10ms Oct 3 14:20:15.077673 (XEN) load tracking window length 1073741824 ns Oct 3 14:20:15.077705 (XEN) Adding cpu 0 to runqueue 0 Oct 3 14:20:15.077730 (XEN) First cpu on runqueue, activating Oct 3 14:20:15.089665 (XEN) Adding cpu 1 to runqueue 0 Oct 3 14:20:15.089697 (XEN) alternatives: Patching with alt table 002c31f0 -> 002c32c8 Oct 3 14:20:15.089724 (XEN) CPU0 will execute ICIALLU on guest exit Oct 3 14:20:15.101672 (XEN) CPU1 will execute ICIALLU on guest exit Oct 3 14:20:15.101705 (XEN) *** LOADING DOMAIN 0 *** Oct 3 14:20:15.101729 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Oct 3 14:20:15.113673 (XEN) Loading ramdisk from boot module @ 0000000043300000 Oct 3 14:20:15.113706 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Oct 3 14:20:15.125596 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Oct 3 14:20:15.689629 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Oct 3 14:20:15.689663 (XEN) Allocating PPI 16 for event channel interrupt Oct 3 14:20:15.725669 (XEN) d0: extended regions not supported for 32-bit guests Oct 3 14:20:15.725703 (XEN) Loading zImage from 0000000042000000 to 0000000067400000-0000000067e68200 Oct 3 14:20:15.737615 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d99abd Oct 3 14:20:15.833644 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b495 Oct 3 14:20:15.929660 (XEN) Initial low memory virq threshold set at 0x4000 pages. Oct 3 14:20:15.941665 (XEN) Scrubbing Free RAM in background Oct 3 14:20:15.941697 (XEN) Std. Loglevel: All Oct 3 14:20:15.941720 (XEN) Guest Loglevel: All Oct 3 14:20:15.941743 (XEN) *************************************************** Oct 3 14:20:15.953681 (XEN) WARNING: SILO mode is not enabled. Oct 3 14:20:15.953681 (XEN) It has implications on the security of the system, Oct 3 14:20:15.953706 (XEN) unless the communications have been forbidden between Oct 3 14:20:15.965672 (XEN) untrusted domains. Oct 3 14:20:15.965703 (XEN) *************************************************** Oct 3 14:20:15.977601 (XEN) 3... 2... 1... Oct 3 14:20:18.977750 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 14:20:18.978329 (XEN) Freed 384kB init memory. Oct 3 14:20:18.978403 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 14:20:20.117695 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Oct 3 14:20:20.141745 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Oct 3 14:20:20.141808 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Oct 3 14:20:20.153770 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Oct 3 14:20:20.153833 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 14:20:20.165685 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 14:20:20.201747 [ 0.000000] Linux version 6.12.0-rc1+ (osstest@himrod2) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Thu Oct 3 08:41:23 UTC 2024 Oct 3 14:20:20.213768 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 14:20:20.225723 [ 0.000000] CPU: div instructions available: patching division code Oct 3 14:20:20.225741 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 14:20:20.237757 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 14:20:20.249728 [ 0.000000] Memory policy: Data cache writealloc Oct 3 14:20:20.249804 [ 0.000000] Xen 4.20 support found Oct 3 14:20:20.249862 [ 0.000000] efi: UEFI not found. Oct 3 14:20:20.261785 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 on node -1 Oct 3 14:20:20.261849 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 14:20:20.261895 [ 0.000000] Zone ranges: Oct 3 14:20:20.273694 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Oct 3 14:20:20.273727 [ 0.000000] Normal empty Oct 3 14:20:20.273751 [ 0.000000] HighMem empty Oct 3 14:20:20.285759 [ 0.000000] Movable zone start for each node Oct 3 14:20:20.285820 [ 0.000000] Early memory node ranges Oct 3 14:20:20.285865 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Oct 3 14:20:20.297741 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Oct 3 14:20:20.297805 [ 0.000000] psci: probing for conduit method from DT. Oct 3 14:20:20.309703 [ 0.000000] psci: PSCIv1.1 detected in firmware. Oct 3 14:20:20.309736 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Oct 3 14:20:20.321741 [ 0.000000] psci: Trusted OS migration not required Oct 3 14:20:20.321802 [ 0.000000] psci: SMC Calling Convention v1.2 Oct 3 14:20:20.321848 [ 0.000000] percpu: Embedded 18 pages/cpu s41868 r8192 d23668 u73728 Oct 3 14:20:20.333761 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 14:20:20.357753 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 14:20:20.357822 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Oct 3 14:20:20.369729 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 131072 Oct 3 14:20:20.369793 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Oct 3 14:20:20.381749 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 14:20:20.381814 [ 0.000000] trace event string verifier disabled Oct 3 14:20:20.393734 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 14:20:20.393794 [ 0.000000] rcu: RCU event tracing is enabled. Oct 3 14:20:20.405784 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Oct 3 14:20:20.405851 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Oct 3 14:20:20.417790 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 14:20:20.417855 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 14:20:20.429723 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 14:20:20.429787 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 14:20:20.441752 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Oct 3 14:20:20.441816 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 14:20:20.453755 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 14:20:20.465724 [ 0.000012] Switching to timer-based delay loop, resolution 41ns Oct 3 14:20:20.477772 [ 0.000511] Console: colour dummy device 80x30 Oct 3 14:20:20.477833 [ 0.000529] printk: legacy console [hvc0] enabled Oct 3 14:20:20.477881 [ 0.284256] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Oct 3 14:20:20.489757 [ 0.294650] CPU: Testing write buffer coherency: ok Oct 3 14:20:20.501740 [ 0.299592] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 14:20:20.501813 [ 0.309145] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 14:20:20.513745 [ 0.315577] pid_max: default: 32768 minimum: 301 Oct 3 14:20:20.513807 [ 0.320352] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 14:20:20.525768 [ 0.327625] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 14:20:20.537695 [ 0.336068] /cpus/cpu@0 missing clock-frequency property Oct 3 14:20:20.537729 [ 0.340829] /cpus/cpu@1 missing clock-frequency property Oct 3 14:20:20.537756 [ 0.346249] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 14:20:20.549751 [ 0.353021] xen:grant_table: Grant tables using version 1 layout Oct 3 14:20:20.549815 [ 0.358079] Grant table initialized Oct 3 14:20:20.561750 [ 0.361623] xen:events: Using FIFO-based ABI Oct 3 14:20:20.561811 [ 0.365932] Xen: initializing cpu0 Oct 3 14:20:20.561856 [ 0.369455] Setting up static identity map for 0x60300000 - 0x603000ac Oct 3 14:20:20.573746 [ 0.377237] rcu: Hierarchical SRCU implementation. Oct 3 14:20:20.573807 [ 0.380850] rcu: Max phase no-delay instances is 1000. Oct 3 14:20:20.585748 [ 0.386390] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level Oct 3 14:20:20.597725 [ 0.396855] EFI services will not be available. Oct 3 14:20:20.597788 [ 0.400157] smp: Bringing up secondary CPUs ... Oct 3 14:20:20.597835 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 14:20:20.669738 [ 0.475300] Xen: initializing cpu1 Oct 3 14:20:20.681733 [ 0.475464] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 14:20:20.681797 [ 0.475489] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 14:20:20.693752 [ 0.494456] smp: Brought up 1 node, 2 CPUs Oct 3 14:20:20.693811 [ 0.498116] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 14:20:20.705749 [ 0.504405] CPU: All CPU(s) started in SVC mode. Oct 3 14:20:20.705809 [ 0.509734] Memory: 412732K/524288K available (15360K kernel code, 2279K rwdata, 6144K rodata, 2048K init, 440K bss, 44180K reserved, 65536K cma-reserved, 0K highmem) Oct 3 14:20:20.717695 [ 0.524612] devtmpfs: initialized Oct 3 14:20:20.729696 [ 0.537722] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 14:20:20.741782 [ 0.544246] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Oct 3 14:20:20.753762 [ 0.553944] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 14:20:20.753826 [ 0.561876] pinctrl core: initialized pinctrl subsystem Oct 3 14:20:20.765746 [ 0.568444] DMI not present or invalid. Oct 3 14:20:20.765805 [ 0.571964] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 14:20:20.777724 [ 0.578602] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 14:20:20.777790 [ 0.587960] thermal_sys: Registered thermal governor 'step_wise' Oct 3 14:20:20.789764 [ 0.588117] software IO TLB: area num 2. Oct 3 14:20:20.789823 [ 0.596789] software IO TLB: only able to allocate 8 MB Oct 3 14:20:20.801723 [ 0.603857] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Oct 3 14:20:20.801723 [ 0.609047] No ATAGs? Oct 3 14:20:20.813745 [ 0.611364] hw-breakpoint: Failed to enable monitor mode on CPU 0. Oct 3 14:20:20.813809 [ 0.619938] Serial: AMBA PL011 UART driver Oct 3 14:20:20.825671 [ 0.671634] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 65 Oct 3 14:20:20.873747 [ 0.700171] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 14:20:20.909662 [ 0.726547] xen:balloon: Initialising balloon driver Oct 3 14:20:20.921712 [ 0.733023] iommu: Default domain type: Translated Oct 3 14:20:20.933728 [ 0.736435] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 14:20:20.945741 [ 0.744183] SCSI subsystem initialized Oct 3 14:20:20.945801 [ 0.746936] usbcore: registered new interface driver usbfs Oct 3 14:20:20.945851 [ 0.752162] usbcore: registered new interface driver hub Oct 3 14:20:20.957736 [ 0.757543] usbcore: registered new device driver usb Oct 3 14:20:20.957817 [ 0.764150] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 14:20:20.969748 [ 0.767766] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 14:20:20.969812 [ 0.773947] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 14:20:20.981740 [ 0.779093] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 14:20:20.981802 [ 0.783985] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 14:20:20.981852 [ 0.790022] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 14:20:20.993756 [ 0.795786] pps_core: LinuxPPS API ver. 1 registered Oct 3 14:20:20.993819 [ 0.800216] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 14:20:21.005746 [ 0.809412] PTP clock support registered Oct 3 14:20:21.005804 [ 0.813594] EDAC MC: Ver: 3.0.0 Oct 3 14:20:21.017640 [ 0.816966] scmi_core: SCMI protocol bus registered Oct 3 14:20:21.017696 [ 0.830624] vgaarb: loaded Oct 3 14:20:21.029612 [ 0.837417] clocksource: Switched to clocksource arch_sys_counter Oct 3 14:20:21.041608 [ 0.852611] NET: Registered PF_INET protocol family Oct 3 14:20:21.053658 [ 0.856256] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Oct 3 14:20:21.065666 [ 0.864149] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 14:20:21.065714 [ 0.871865] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 14:20:21.077664 [ 0.879651] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Oct 3 14:20:21.089670 [ 0.887493] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Oct 3 14:20:21.089711 [ 0.894765] TCP: Hash tables configured (established 4096 bind 4096) Oct 3 14:20:21.101668 [ 0.901153] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 14:20:21.101709 [ 0.907702] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 14:20:21.113661 [ 0.914804] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 14:20:21.113703 [ 0.921005] RPC: Registered named UNIX socket transport module. Oct 3 14:20:21.125680 [ 0.926423] RPC: Registered udp transport module. Oct 3 14:20:21.125722 [ 0.931235] RPC: Registered tcp transport module. Oct 3 14:20:21.137664 [ 0.935970] RPC: Registered tcp-with-tls transport module. Oct 3 14:20:21.137702 [ 0.941552] RPC: Registered tcp NFSv4.1 backchannel transport module. Oct 3 14:20:21.149664 [ 0.948064] PCI: CLS 0 bytes, default 64 Oct 3 14:20:21.149704 [ 0.953134] Initialise system trusted keyrings Oct 3 14:20:21.149751 [ 0.956924] Trying to unpack rootfs image as initramfs... Oct 3 14:20:21.161623 [ 0.977828] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Oct 3 14:20:21.185626 [ 0.983186] squashfs: version 4.0 (2009/01/31) Phillip Lougher Oct 3 14:20:21.185669 [ 1.018448] NFS: Registering the id_resolver key type Oct 3 14:20:21.221661 [ 1.022164] Key type id_resolver registered Oct 3 14:20:21.221709 [ 1.026390] Key type id_legacy registered Oct 3 14:20:21.233661 [ 1.030514] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Oct 3 14:20:21.233711 [ 1.037261] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Oct 3 14:20:21.245668 [ 1.045151] Key type asymmetric registered Oct 3 14:20:21.245715 [ 1.048899] Asymmetric key parser 'x509' registered Oct 3 14:20:21.245763 [ 1.053882] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) Oct 3 14:20:21.257662 [ 1.061311] io scheduler mq-deadline registered Oct 3 14:20:21.257721 [ 1.065889] io scheduler kyber registered Oct 3 14:20:21.269642 [ 1.070068] io scheduler bfq registered Oct 3 14:20:21.269686 [ 1.180563] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 14:20:21.377632 [ 1.275659] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 14:20:21.473657 [ 1.281914] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 14:20:21.485649 [ 1.313507] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 14:20:21.521740 [ 1.319789] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 14:20:21.521812 [ 1.345462] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 14:20:21.545750 [ 1.351727] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 14:20:21.557725 [ 1.368908] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 14:20:21.569754 [ 1.375111] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 14:20:21.581757 [ 1.387483] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 14:20:21.593737 [ 1.401247] xen:xen_evtchn: Event-channel device installed Oct 3 14:20:21.605693 [ 1.460389] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 14:20:21.665697 [ 1.472349] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 14:20:21.677757 [ 1.480708] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 14:20:21.689747 [ 1.489605] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 14:20:21.689817 [ 1.498679] SuperH (H)SCI(F) driver initialized Oct 3 14:20:21.701741 [ 1.502790] STMicroelectronics ASC driver initialized Oct 3 14:20:21.701802 [ 1.507680] STM32 USART driver initialized Oct 3 14:20:21.713745 [ 1.513081] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 14:20:21.713811 [ 1.520146] random: crng init done Oct 3 14:20:21.713856 [ 1.543742] brd: module loaded Oct 3 14:20:21.737701 [ 1.549745] loop: module loaded Oct 3 14:20:21.749682 [ 1.569969] Invalid max_queues (4), will use default max: 2. Oct 3 14:20:21.773696 [ 1.589923] Freeing initrd memory: 11880K Oct 3 14:20:21.785709 [ 1.591188] tun: Universal TUN/TAP device driver, 1.6 Oct 3 14:20:21.797751 [ 1.597898] CAN device driver interface Oct 3 14:20:21.797810 [ 1.603015] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Oct 3 14:20:21.809705 [ 1.614310] xen_netfront: Initialising Xen virtual ethernet driver Oct 3 14:20:21.821717 [ 1.619179] pegasus: Pegasus/Pegasus II USB Ethernet driver Oct 3 14:20:21.821779 [ 1.624782] usbcore: registered new interface driver pegasus Oct 3 14:20:21.833747 [ 1.630519] usbcore: registered new interface driver asix Oct 3 14:20:21.833810 [ 1.635981] usbcore: registered new interface driver ax88179_178a Oct 3 14:20:21.833861 [ 1.642158] usbcore: registered new interface driver cdc_ether Oct 3 14:20:21.845753 [ 1.648055] usbcore: registered new interface driver smsc75xx Oct 3 14:20:21.845815 [ 1.653859] usbcore: registered new interface driver smsc95xx Oct 3 14:20:21.857750 [ 1.659689] usbcore: registered new interface driver net1080 Oct 3 14:20:21.857812 [ 1.665402] usbcore: registered new interface driver cdc_subset Oct 3 14:20:21.869764 [ 1.671403] usbcore: registered new interface driver zaurus Oct 3 14:20:21.869826 [ 1.677035] usbcore: registered new interface driver cdc_ncm Oct 3 14:20:21.881741 [ 1.686468] usbcore: registered new interface driver usb-storage Oct 3 14:20:21.893693 [ 1.699519] i2c_dev: i2c /dev entries driver Oct 3 14:20:21.905670 [ 1.718265] device-mapper: uevent: version 1.0.3 Oct 3 14:20:21.917737 [ 1.721684] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev Oct 3 14:20:21.929742 [ 1.731302] cpu cpu0: OPP table can't be empty Oct 3 14:20:21.929802 [ 1.735999] failed to register cpuidle driver Oct 3 14:20:21.941745 [ 1.739406] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Oct 3 14:20:21.941830 [ 1.747773] sdhci: Secure Digital Host Controller Interface driver Oct 3 14:20:21.953723 [ 1.752759] sdhci: Copyright(c) Pierre Ossman Oct 3 14:20:21.953783 [ 1.760861] sdhci-pltfm: SDHCI platform and OF driver helper Oct 3 14:20:21.965732 [ 1.768916] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Oct 3 14:20:21.965797 [ 1.783082] usbcore: registered new interface driver usbhid Oct 3 14:20:21.989705 [ 1.787279] usbhid: USB HID core driver Oct 3 14:20:21.989765 [ 1.800376] NET: Registered PF_INET6 protocol family Oct 3 14:20:22.001732 [ 1.804765] Segment Routing with IPv6 Oct 3 14:20:22.001791 [ 1.807769] In-situ OAM (IOAM) with IPv6 Oct 3 14:20:22.013753 [ 1.811772] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Oct 3 14:20:22.013816 [ 1.818172] NET: Registered PF_PACKET protocol family Oct 3 14:20:22.025726 [ 1.822817] can: controller area network core Oct 3 14:20:22.025786 [ 1.827265] NET: Registered PF_CAN protocol family Oct 3 14:20:22.025835 [ 1.832109] can: raw protocol Oct 3 14:20:22.037739 [ 1.835136] can: broadcast manager protocol Oct 3 14:20:22.037799 [ 1.839401] can: netlink gateway - max_hops=1 Oct 3 14:20:22.037847 [ 1.844127] Key type dns_resolver registered Oct 3 14:20:22.049701 [ 1.856717] ThumbEE CPU extension supported. Oct 3 14:20:22.061705 [ 1.859655] Registering SWP/SWPB emulation handler Oct 3 14:20:22.061766 [ 1.874126] Loading compiled-in X.509 certificates Oct 3 14:20:22.073698 [ 1.914446] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 14:20:22.109713 [ 1.918083] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 14:20:22.121767 [ 1.924574] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 14:20:22.133753 [ 1.932835] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 14:20:22.133824 [ 1.973568] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 14:20:22.169694 [ 1.982289] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T14:20:23 UTC (1727965223) Oct 3 14:20:22.181749 [ 1.993257] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 14:20:22.193753 [ 1.997922] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 14:20:22.193814 [ 2.002234] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 14:20:22.205738 [ 2.009009] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 14:20:22.205800 [ 2.014743] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 14:20:22.217737 [ 2.025409] clk: Not disabling unused clocks Oct 3 14:20:22.229707 [ 2.028378] PM: genpd: Disabling unused power domains Oct 3 14:20:22.229770 [ 2.037095] Freeing unused kernel image (initmem) memory: 2048K Oct 3 14:20:22.241667 [ 2.043517] Run /init as init process Oct 3 14:20:22.241720 Loading, please wait... Oct 3 14:20:22.265588 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 14:20:22.337604 [ 3.287116] i2c-gpio i2c-10: using lines 552 (SDA) and 553 (SCL) Oct 3 14:20:23.489727 [ 3.340807] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 14:20:23.549687 [ 3.360925] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 14:20:23.561745 [ 3.413260] Synopsys Designware Multimedia Card Interface Driver Oct 3 14:20:23.609726 [ 3.502397] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 14:20:23.705703 [ 3.524285] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 14:20:23.729730 [ 3.531095] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 14:20:23.729800 [ 3.537836] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 14:20:23.741759 [ 3.546936] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 14:20:23.753716 [ 3.553031] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 14:20:23.753798 [ 3.559348] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 125,32 bit host data width,128 deep fifo Oct 3 14:20:23.765755 [ 3.568477] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 14:20:23.777635 [ 3.577876] mmc_host mmc0: card is polling. Oct 3 14:20:23.777667 [ 3.581530] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 14:20:23.789747 [ 3.587216] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 14:20:23.789810 [ 3.592775] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo Oct 3 14:20:23.801710 [ 3.619225] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 14:20:23.825722 [ 3.634309] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 14:20:23.837747 [ 3.640075] ahci-dwc 122f0000.sata: AHCI vers 0001.0300, 32 command slots, 6 Gbps, platform mode Oct 3 14:20:23.849750 [ 3.648894] ahci-dwc 122f0000.sata: 1/1 ports implemented (port mask 0x1) Oct 3 14:20:23.849814 [ 3.655708] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 14:20:23.861754 [ 3.659273] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 14:20:23.873722 [ 3.679596] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 14:20:23.885731 [ 3.693857] phy phy-12130000.phy.9: phy_power_on was called before phy_init Oct 3 14:20:23.897739 [ 3.699789] exynos-ohci 12120000.usb: USB Host Controller Oct 3 14:20:23.897801 [ 3.705261] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Oct 3 14:20:23.909728 [ 3.726529] scsi host0: ahci-dwc Oct 3 14:20:23.921703 [ 3.728784] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 127 lpm-pol 0 Oct 3 14:20:23.933723 [ 3.761438] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 14:20:23.957708 [ 3.823265] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 14:20:24.029733 [ 3.841284] mmc0: new DDR MMC card at address 0001 Oct 3 14:20:24.047685 [ 3.849112] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Oct 3 14:20:24.053672 [ 3.909194] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 14:20:24.113753 [ 3.918469] mmc1: new high speed SDHC card at address aaaa Oct 3 14:20:24.125701 [ 3.931045] exynos-ohci 12120000.usb: irq 128, io mem 0x12120000 Oct 3 14:20:24.137726 [ 3.951031] mmcblk0: p1 p2 p3 p4 Oct 3 14:20:24.149697 [ 3.957917] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Oct 3 14:20:24.161676 [ 3.994485] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Oct 3 14:20:24.197751 [ 3.998630] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Oct 3 14:20:24.197812 [ 3.998848] hub 1-0:1.0: USB hub found Oct 3 14:20:24.209675 [ 4.007076] hub 1-0:1.0: 3 ports detected Oct 3 14:20:24.209736 [ 4.017667] phy phy-12130000.phy.9: phy_power_on was called before phy_init Oct 3 14:20:24.221755 [ 4.023294] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 14:20:24.221807 [ 4.028886] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Oct 3 14:20:24.233756 [ 4.037563] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Oct 3 14:20:24.245674 [ 4.053879] exynos-ehci 12110000.usb: irq 128, io mem 0x12110000 Oct 3 14:20:24.257693 [ 4.078334] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 14:20:24.281695 [ 4.102898] hub 2-0:1.0: USB hub found Oct 3 14:20:24.305724 [ 4.110492] hub 2-0:1.0: 3 ports detected Oct 3 14:20:24.305783 [ 4.134688] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Oct 3 14:20:24.341685 [ 4.142207] s3c-rtc 101e0000.rtc: registered as rtc1 Oct 3 14:20:24.341747 [ 4.227450] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 14:20:24.425752 [ 4.233323] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 14:20:24.437740 [ 4.239081] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 14:20:24.437806 [ 4.246772] ata1.00: configured for UDMA/133 Oct 3 14:20:24.449751 [ 4.250392] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 14:20:24.449820 [ 4.260607] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 14:20:24.461757 [ 4.266728] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 14:20:24.473745 [ 4.272229] sd 0:0:0:0: [sda] Write Protect is off Oct 3 14:20:24.473806 [ 4.276976] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 14:20:24.485726 [ 4.291779] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 14:20:24.497671 [ 4.362259] sda: sda1 sda2 < sda5 > Oct 3 14:20:24.557667 [ 4.368552] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 14:20:24.569703 [ 4.466112] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Oct 3 14:20:24.665730 [ 4.476720] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 14:20:24.677752 [ 4.480921] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 14:20:24.689684 [ 4.577871] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000808002000010 Oct 3 14:20:24.785753 [ 4.586836] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Oct 3 14:20:24.785818 [ 4.592214] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 14:20:24.797746 [ 4.597596] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 14:20:24.797815 [ 4.605274] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 14:20:24.809746 [ 4.613716] hub 3-0:1.0: USB hub found Oct 3 14:20:24.809804 [ 4.616372] hub 3-0:1.0: 1 port detected Oct 3 14:20:24.821744 [ 4.621955] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 14:20:24.821814 [ 4.629955] hub 4-0:1.0: USB hub found Oct 3 14:20:24.833716 [ 4.632796] hub 4-0:1.0: 1 port detected Oct 3 14:20:24.833776 [ 4.671655] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 14:20:24.881687 [ 4.846314] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 14:20:25.049735 [ 4.954954] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 14:20:25.157746 [ 5.063239] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 14:20:25.265712 [ 5.171374] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 14:20:25.373642 [ 5.279533] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 14:20:25.481790 [ 5.387784] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 14:20:25.589761 [ 5.495870] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 14:20:25.697754 [ 5.603990] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 14:20:25.805753 [ 5.712111] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 14:20:25.913816 [ 6.120969] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Oct 3 14:20:26.321747 [ 6.228746] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Oct 3 14:20:26.429636 [ 6.837199] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 14:20:27.041771 Begin: Loading essential drivers ... done. Oct 3 14:20:27.089683 Begin: Running /scripts/init-premount ... done. Oct 3 14:20:30.101843 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 14:20:30.113765 Begin: Running /scripts/local-premount ... done. Oct 3 14:20:30.113826 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 14:20:30.173704 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 14:20:30.293702 /dev/mapper/arndale--westfield--vg-root: clean, 46727/1220608 files, 626073/4882432 blocks Oct 3 14:20:30.497720 done. Oct 3 14:20:30.509711 [ 10.315080] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 14:20:30.521684 [ 10.557850] EXT4-fs (dm-0): mounted filesystem 96095c99-74e1-4296-95e6-4d107ba2b655 ro with ordered data mode. Quota mode: disabled. Oct 3 14:20:30.761754 done. Oct 3 14:20:30.761806 Begin: Running /scripts/local-bottom ... done. Oct 3 14:20:30.857801 Begin: Running /scripts/init-bottom ... done. Oct 3 14:20:30.893685 INIT: version 3.06 booting Oct 3 14:20:31.349698 INIT: No inittab.d directory found Oct 3 14:20:31.397730 Using makefile-style concurrent boot in runlevel S. Oct 3 14:20:31.697703 Starting hotplug events dispatcher: systemd-udevd. Oct 3 14:20:33.269763 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 14:20:33.701756 Synthesizing the initial hotplug events (devices)...done. Oct 3 14:20:34.541779 Waiting for /dev to be fully populated...[ 14.369218] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Oct 3 14:20:34.577767 [ 14.403289] s5p-secss 10830000.sss: s5p-sss driver registered Oct 3 14:20:34.601789 [ 14.450052] mc: Linux media interface: v0.10 Oct 3 14:20:34.649795 [ 14.570477] videodev: Linux video capture interface: v2.00 Oct 3 14:20:34.769783 [ 14.705584] s5p-mfc 11000000.codec: Adding to iommu group 0 Oct 3 14:20:34.901786 [ 14.865983] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Oct 3 14:20:35.069856 [ 14.873794] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 14:20:35.081922 [ 14.904330] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 14:20:35.105949 [ 14.921028] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 14:20:35.135168 [ 14.928795] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 14:20:35.141843 [ 14.945737] s5p-mfc 11000000.codec: decoder registered as /dev/video0 Oct 3 14:20:35.153770 [ 14.951420] s5p-mfc 11000000.codec: encoder registered as /dev/video1 Oct 3 14:20:35.153770 [ 14.992670] exynos-gsc 13e00000.gsc: Adding to iommu group 1 Oct 3 14:20:35.189831 [ 14.998311] exynos-gsc 13e10000.gsc: Adding to iommu group 2 Oct 3 14:20:35.201840 [ 15.003734] exynos-gsc 13e20000.gsc: Adding to iommu group 3 Oct 3 14:20:35.201840 [ 15.024524] exynos-gsc 13e30000.gsc: Adding to iommu group 4 Oct 3 14:20:35.225738 [ 15.062534] usb3503 usb-hub: switched to HUB mode Oct 3 14:20:35.261950 [ 15.065883] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 14:20:35.273931 [ 15.099322] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 14:20:35.309878 [ 15.208020] blk_print_req_error: 6 callbacks suppressed Oct 3 14:20:35.405992 [ 15.208033] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 14:20:35.417967 [ 15.321461] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 14:20:35.525992 [ 15.388697] usb 2-3: new high-speed USB device number 2 using exynos-ehci Oct 3 14:20:35.585988 [ 15.429599] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 14:20:35.633970 [ 15.494534] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Oct 3 14:20:35.694020 [ 15.542593] wm8994 3-001a: Device is not a WM8994, ID is 0 Oct 3 14:20:35.741992 [ 15.546876] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 14:20:35.753947 [ 15.575501] wm8994 3-001a: probe with driver wm8994 failed with error -22 Oct 3 14:20:35.777998 [ 15.584079] hub 2-3:1.0: USB hub found Oct 3 14:20:35.778057 [ 15.586674] hub 2-3:1.0: 3 ports detected Oct 3 14:20:35.789894 [ 15.657264] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 14:20:35.861979 [ 15.767783] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 14:20:35.970000 [ 15.876108] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 14:20:36.078000 [ 15.907567] usb 2-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 14:20:36.113930 [ 15.934830] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 14:20:36.138038 [ 15.942603] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 14:20:36.150012 [ 15.951276] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 14:20:36.161985 [ 15.966459] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 14:20:36.174005 [ 15.974208] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 14:20:36.185993 [ 15.982895] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 14:20:36.186069 [ 15.994019] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 Oct 3 14:20:36.197963 [ 16.070105] hub 2-3.2:1.0: USB hub found Oct 3 14:20:36.269989 [ 16.073051] hub 2-3.2:1.0: 4 ports detected Oct 3 14:20:36.270049 [ 16.154399] usbcore: registered new device driver onboard-usb-dev Oct 3 14:20:36.353980 [ 16.377453] usb 2-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 14:20:36.585090 [ 16.408357] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Oct 3 14:20:36.609089 [ 16.501557] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 14:20:36.705057 [ 16.516127] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Oct 3 14:20:36.717089 [ 17.119299] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 14:20:37.329066 [ 17.130094] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 14:20:37.329136 [ 17.141421] Asix Electronics AX88772A usb-002:004:10: attached PHY driver (mii_bus:phy_addr=usb-002:004:10, irq=POLL) Oct 3 14:20:37.353089 [ 17.151265] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, a6:bf:96:07:3f:8f Oct 3 14:20:37.365001 done. Oct 3 14:20:37.580994 [ 17.795406] EXT4-fs (dm-0): re-mounted 96095c99-74e1-4296-95e6-4d107ba2b655 r/w. Quota mode: disabled. Oct 3 14:20:38.001049 Checking file systems.../dev/sda1: clean, 2188/61056 files, 44694/243968 blocks Oct 3 14:20:39.588890 done. Oct 3 14:20:39.624802 Cleaning up temporary files... /tmp Oct 3 14:20:39.780871 . Oct 3 14:20:39.780871 [ 19.797707] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 14:20:39.997017 [ 19.846525] EXT4-fs (sda1): mounted filesystem 31f4e2c3-193e-40a3-ba31-70c386ca84cd r/w with ordered data mode. Quota mode: disabled. Oct 3 14:20:40.056823 [ 19.941737] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k Oct 3 14:20:40.152826 Mounting local filesystems...done. Oct 3 14:20:40.380890 Activating swapfile swap, if any...done. Oct 3 14:20:40.392855 Cleaning up temporary files.... Oct 3 14:20:40.416821 Starting Setting kernel variables: sysctl. Oct 3 14:20:40.608793 [ 21.806259] xenbr0: port 1(eth0) entered blocking state Oct 3 14:20:42.009055 [ 21.810193] xenbr0: port 1(eth0) entered disabled state Oct 3 14:20:42.009062 [ 21.815445] asix 2-3.2.4:1.0 eth0: entered allmulticast mode Oct 3 14:20:42.020851 [ 21.821335] asix 2-3.2.4:1.0 eth0: entered promiscuous mode Oct 3 14:20:42.020851 [ 21.832042] asix 2-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 14:20:42.032836 Configuring network interfaces...RTNETLINK answers: Operation not supported Oct 3 14:20:43.872903 Oct 3 14:20:43.872903 Waiting for xenbr0 to get ready (MAXWAIT is 2 seconds). Oct 3 14:20:43.872903 [ 24.014805] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 14:20:44.212906 [ 24.017595] xenbr0: port 1(eth0) entered blocking state Oct 3 14:20:44.224887 [ 24.026050] xenbr0: port 1(eth0) entered forwarding state Oct 3 14:20:44.224887 done. Oct 3 14:20:44.404853 Cleaning up temporary files.... Oct 3 14:20:44.476820 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Oct 3 14:20:44.572876 Starting nftables: none Oct 3 14:20:44.584921 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Oct 3 14:20:44.692907 failed! Oct 3 14:20:44.692907 startpar: service(s) returned failure: nftables ... failed! Oct 3 14:20:44.704849 INIT: Entering runlevel: 2 Oct 3 14:20:44.716856 Using makefile-style concurrent boot in runlevel 2. Oct 3 14:20:44.728875 Starting Apache httpd web server: apache2AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.149.64.45. Set the 'ServerName' directive globally to suppress this message Oct 3 14:20:45.460899 [ 26.249316] platform sound: deferred probe pending: arndale-audio: snd_soc_register_card() failed Oct 3 14:20:46.456872 . Oct 3 14:20:46.528834 Starting NTP server: ntpd2024-10-03T14:20:47 ntpd[1142]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 14:20:46.976926 2024-10-03T14:20:47 ntpd[1142]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 14:20:46.988892 . Oct 3 14:20:46.988892 Starting system message bus: dbus. Oct 3 14:20:47.132873 Starting SMP IRQ Balancer: irqbalance. Oct 3 14:20:47.468864 Starting OpenBSD Secure Shell server: sshd. Oct 3 14:20:47.988870 Starting /usr/local/sbin/xenstored... Oct 3 14:20:50.148925 Setting domain 0 name, domid and JSON config... Oct 3 14:20:50.148925 Done setting up Dom0 Oct 3 14:20:50.148925 Starting xenconsoled... Oct 3 14:20:50.160870 Starting QEMU as disk backend for dom0 Oct 3 14:20:50.160870 Starting libvirt management daemon: libvirtd2024-10-03 14:20:51.450+0000: 1233: info : libvirt version: 10.9.0 Oct 3 14:20:50.904928 2024-10-03 14:20:51.450+0000: 1233: info : hostname: arndale-westfield Oct 3 14:20:50.916929 2024-10-03 14:20:51.450+0000: 1233: debug : virLogParseOutputs:1638 : outputs=1:file:/var/log/libvirt/libvirtd.log Oct 3 14:20:50.928925 2024-10-03 14:20:51.451+0000: 1233: debug : virLogParseOutput:1485 : output=1:file:/var/log/libvirt/libvirtd.log Oct 3 14:20:50.940859 . Oct 3 14:20:50.940859 Oct 3 14:20:52.057036 Debian GNU/Linux 12 arndale-westfield hvc0 Oct 3 14:20:52.057599 Oct 3 14:20:52.057702 arndale-westfield login: [ 68.005939] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 14:21:28.212928 [ 68.135838] EXT4-fs (dm-2): mounted filesystem 2e95cbcb-d578-47ae-8071-a8eaa125bca7 r/w with ordered data mode. Quota mode: disabled. Oct 3 14:21:28.345000 [ 69.413288] EXT4-fs (dm-2): unmounting filesystem 2e95cbcb-d578-47ae-8071-a8eaa125bca7. Oct 3 14:21:29.617771 [ 85.661303] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 14:21:45.869650 [ 85.792244] EXT4-fs (dm-2): mounted filesystem 2e95cbcb-d578-47ae-8071-a8eaa125bca7 r/w with ordered data mode. Quota mode: disabled. Oct 3 14:21:46.001747 [ 88.456466] xenbr0: port 2(vif1.0) entered blocking state Oct 3 14:21:48.653637 [ 88.460531] xenbr0: port 2(vif1.0) entered disabled state Oct 3 14:21:48.665651 [ 88.465988] vif vif-1-0 vif1.0: entered allmulticast mode Oct 3 14:21:48.665651 [ 88.471688] vif vif-1-0 vif1.0: entered promiscuous mode Oct 3 14:21:48.677732 (XEN) d1v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 14:21:52.733729 (XEN) d1v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 14:21:52.841733 (XEN) d1v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 14:21:52.889717 (XEN) common/grant_table.c:1909:d1v0 Expanding d1 grant table from 1 to 2 frames Oct 3 14:21:55.769778 (XEN) common/grant_table.c:1909:d1v0 Expanding d1 grant table from 2 to 3 frames Oct 3 14:21:55.793764 [ 95.639409] vif vif-1-0 vif1.0: Guest Rx ready Oct 3 14:21:55.841769 [ 95.642761] xenbr0: port 2(vif1.0) entered blocking state Oct 3 14:21:55.841832 [ 95.647992] xenbr0: port 2(vif1.0) entered forwarding state Oct 3 14:21:55.841881 (XEN) gnttab_mark_dirty not implemented yet Oct 3 14:21:55.877684 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 14:22:31.113090 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 14:29:11.485785 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 14:35:52.933814 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 14:42:34.336694 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 14:49:15.792804 [ 1959.091843] xenbr0: port 2(vif1.0) entered disabled state Oct 3 14:52:59.273792 [ 1981.177798] xenbr0: port 2(vif1.0) entered disabled state Oct 3 14:53:21.357874 [ 1981.182153] vif vif-1-0 vif1.0 (unregistering): left allmulticast mode Oct 3 14:53:21.369845 [ 1981.188481] vif vif-1-0 vif1.0 (unregistering): left promiscuous mode Oct 3 14:53:21.369911 [ 1981.194989] xenbr0: port 2(vif1.0) entered disabled state Oct 3 14:53:21.381778 [ 1984.715282] EXT4-fs (dm-2): unmounting filesystem 2e95cbcb-d578-47ae-8071-a8eaa125bca7. Oct 3 14:53:24.897748 [ 1998.164974] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 14:53:38.349779 [ 1998.295727] EXT4-fs (dm-2): mounted filesystem 2e95cbcb-d578-47ae-8071-a8eaa125bca7 r/w with ordered data mode. Quota mode: disabled. Oct 3 14:53:38.481791 [ 2000.322874] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 14:53:40.513815 [ 2000.370910] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 14:53:40.549721 [ 2010.651438] xenbr0: port 2(vif2.0) entered blocking state Oct 3 14:53:50.829724 [ 2010.655479] xenbr0: port 2(vif2.0) entered disabled state Oct 3 14:53:50.841732 [ 2010.661026] vif vif-2-0 vif2.0: entered allmulticast mode Oct 3 14:53:50.841766 [ 2010.666596] vif vif-2-0 vif2.0: entered promiscuous mode Oct 3 14:53:50.853681 (XEN) d2v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 14:53:55.049722 (XEN) d2v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 14:53:55.159176 (XEN) d2v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 14:53:55.205249 (XEN) common/grant_table.c:1909:d2v0 Expanding d2 grant table from 1 to 2 frames Oct 3 14:53:58.269737 (XEN) common/grant_table.c:1909:d2v0 Expanding d2 grant table from 2 to 3 frames Oct 3 14:53:58.281688 [ 2018.136513] vif vif-2-0 vif2.0: Guest Rx ready Oct 3 14:53:58.317736 [ 2018.140438] xenbr0: port 2(vif2.0) entered blocking state Oct 3 14:53:58.329719 [ 2018.145095] xenbr0: port 2(vif2.0) entered forwarding state Oct 3 14:53:58.329783 [ 2061.307081] xenbr0: port 2(vif2.0) entered disabled state Oct 3 14:54:41.484797 [ 2061.528000] xenbr0: port 2(vif2.0) entered disabled state Oct 3 14:54:41.712805 [ 2061.533377] vif vif-2-0 vif2.0 (unregistering): left allmulticast mode Oct 3 14:54:41.712805 [ 2061.538712] vif vif-2-0 vif2.0 (unregistering): left promiscuous mode Oct 3 14:54:41.724826 [ 2061.545174] xenbr0: port 2(vif2.0) entered disabled state Oct 3 14:54:41.724826 [ 2115.485972] EXT4-fs (dm-2): unmounting filesystem 2e95cbcb-d578-47ae-8071-a8eaa125bca7. Oct 3 14:55:35.665733 [ 2116.770760] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 14:55:36.949757 [ 2116.901473] EXT4-fs (dm-2): mounted filesystem 2e95cbcb-d578-47ae-8071-a8eaa125bca7 r/w with ordered data mode. Quota mode: disabled. Oct 3 14:55:37.081757 [ 2118.122751] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 14:55:38.305660 [ 2118.144789] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 14:55:38.317652 [ 2125.800908] xenbr0: port 2(vif3.0) entered blocking state Oct 3 14:55:45.984871 [ 2125.804948] xenbr0: port 2(vif3.0) entered disabled state Oct 3 14:55:45.984871 [ 2125.810494] vif vif-3-0 vif3.0: entered allmulticast mode Oct 3 14:55:45.996878 [ 2125.816044] vif vif-3-0 vif3.0: entered promiscuous mode Oct 3 14:55:45.996878 (XEN) d3v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 14:55:50.209757 (XEN) d3v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 14:55:50.329678 (XEN) d3v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 14:55:50.365697 (XEN) common/grant_table.c:1909:d3v0 Expanding d3 grant table from 1 to 2 frames Oct 3 14:55:53.381836 (XEN) common/grant_table.c:1909:d3v0 Expanding d3 grant table from 2 to 3 frames Oct 3 14:55:53.381913 [ 2133.277544] vif vif-3-0 vif3.0: Guest Rx ready Oct 3 14:55:53.453783 [ 2133.281088] xenbr0: port 2(vif3.0) entered blocking state Oct 3 14:55:53.465825 [ 2133.286137] xenbr0: port 2(vif3.0) entered forwarding state Oct 3 14:55:53.465888 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 14:55:56.837810 [ 2168.068097] xenbr0: port 2(vif3.0) entered disabled state Oct 3 14:56:28.253728 [ 2168.277954] xenbr0: port 2(vif3.0) entered disabled state Oct 3 14:56:28.457728 [ 2168.282471] vif vif-3-0 vif3.0 (unregistering): left allmulticast mode Oct 3 14:56:28.469718 [ 2168.288657] vif vif-3-0 vif3.0 (unregistering): left promiscuous mode Oct 3 14:56:28.469780 [ 2168.295144] xenbr0: port 2(vif3.0) entered disabled state Oct 3 14:56:28.481670 [ 2221.459667] EXT4-fs (dm-2): unmounting filesystem 2e95cbcb-d578-47ae-8071-a8eaa125bca7. Oct 3 14:57:21.645743 [ 2222.776613] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 14:57:22.953807 [ 2222.906557] EXT4-fs (dm-2): mounted filesystem 2e95cbcb-d578-47ae-8071-a8eaa125bca7 r/w with ordered data mode. Quota mode: disabled. Oct 3 14:57:23.097760 [ 2224.158343] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 14:57:24.345772 [ 2224.193587] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 14:57:24.369674 [ 2231.872666] xenbr0: port 2(vif4.0) entered blocking state Oct 3 14:57:32.049768 [ 2231.876699] xenbr0: port 2(vif4.0) entered disabled state Oct 3 14:57:32.061754 [ 2231.882272] vif vif-4-0 vif4.0: entered allmulticast mode Oct 3 14:57:32.061817 [ 2231.887895] vif vif-4-0 vif4.0: entered promiscuous mode Oct 3 14:57:32.061867 (XEN) d4v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 14:57:36.273768 (XEN) d4v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 14:57:36.393694 (XEN) d4v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 14:57:36.429739 (XEN) common/grant_table.c:1909:d4v0 Expanding d4 grant table from 1 to 2 frames Oct 3 14:57:39.489774 (XEN) common/grant_table.c:1909:d4v0 Expanding d4 grant table from 2 to 3 frames Oct 3 14:57:39.489853 [ 2239.389073] vif vif-4-0 vif4.0: Guest Rx ready Oct 3 14:57:39.561724 [ 2239.392905] xenbr0: port 2(vif4.0) entered blocking state Oct 3 14:57:39.573751 [ 2239.398324] xenbr0: port 2(vif4.0) entered forwarding state Oct 3 14:57:39.573813 [ 2274.095803] xenbr0: port 2(vif4.0) entered disabled state Oct 3 14:58:14.273774 [ 2274.347928] xenbr0: port 2(vif4.0) entered disabled state Oct 3 14:58:14.525753 [ 2274.352625] vif vif-4-0 vif4.0 (unregistering): left allmulticast mode Oct 3 14:58:14.537765 [ 2274.358664] vif vif-4-0 vif4.0 (unregistering): left promiscuous mode Oct 3 14:58:14.537829 [ 2274.365094] xenbr0: port 2(vif4.0) entered disabled state Oct 3 14:58:14.549714 [ 2327.376930] EXT4-fs (dm-2): unmounting filesystem 2e95cbcb-d578-47ae-8071-a8eaa125bca7. Oct 3 14:59:07.557749 [ 2328.669774] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 14:59:08.857744 [ 2328.800530] EXT4-fs (dm-2): mounted filesystem 2e95cbcb-d578-47ae-8071-a8eaa125bca7 r/w with ordered data mode. Quota mode: disabled. Oct 3 14:59:08.989703 [ 2330.031434] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 14:59:10.213847 [ 2330.064607] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 14:59:10.249593 [ 2337.702698] xenbr0: port 2(vif5.0) entered blocking state Oct 3 14:59:17.885751 [ 2337.706732] xenbr0: port 2(vif5.0) entered disabled state Oct 3 14:59:17.885804 [ 2337.712248] vif vif-5-0 vif5.0: entered allmulticast mode Oct 3 14:59:17.897668 [ 2337.717904] vif vif-5-0 vif5.0: entered promiscuous mode Oct 3 14:59:17.897712 (XEN) d5v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 14:59:22.112842 (XEN) d5v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 14:59:22.220840 (XEN) d5v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 14:59:22.268831 (XEN) common/grant_table.c:1909:d5v0 Expanding d5 grant table from 1 to 2 frames Oct 3 14:59:25.313652 (XEN) common/grant_table.c:1909:d5v0 Expanding d5 grant table from 2 to 3 frames Oct 3 14:59:25.313652 [ 2345.173534] vif vif-5-0 vif5.0: Guest Rx ready Oct 3 14:59:25.349650 [ 2345.177847] xenbr0: port 2(vif5.0) entered blocking state Oct 3 14:59:25.361658 [ 2345.182106] xenbr0: port 2(vif5.0) entered forwarding state Oct 3 14:59:25.361658 [ 2375.333571] xenbr0: port 2(vif5.0) entered disabled state Oct 3 14:59:55.505881 [ 2375.548723] xenbr0: port 2(vif5.0) entered disabled state Oct 3 14:59:55.721892 [ 2375.554022] vif vif-5-0 vif5.0 (unregistering): left allmulticast mode Oct 3 14:59:55.733918 [ 2375.559412] vif vif-5-0 vif5.0 (unregistering): left promiscuous mode Oct 3 14:59:55.733983 [ 2375.565881] xenbr0: port 2(vif5.0) entered disabled state Oct 3 14:59:55.745730 [ 2428.866399] EXT4-fs (dm-2): unmounting filesystem 2e95cbcb-d578-47ae-8071-a8eaa125bca7. Oct 3 15:00:49.045799 [ 2430.196759] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 15:00:50.377778 [ 2430.327707] EXT4-fs (dm-2): mounted filesystem 2e95cbcb-d578-47ae-8071-a8eaa125bca7 r/w with ordered data mode. Quota mode: disabled. Oct 3 15:00:50.509721 [ 2431.572904] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 15:00:51.757760 [ 2431.593842] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 15:00:51.769701 [ 2439.286921] xenbr0: port 2(vif6.0) entered blocking state Oct 3 15:00:59.461789 [ 2439.291025] xenbr0: port 2(vif6.0) entered disabled state Oct 3 15:00:59.473726 [ 2439.296479] vif vif-6-0 vif6.0: entered allmulticast mode Oct 3 15:00:59.473788 [ 2439.302121] vif vif-6-0 vif6.0: entered promiscuous mode Oct 3 15:00:59.485679 (XEN) d6v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 15:01:03.697692 (XEN) d6v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 15:01:03.805644 (XEN) d6v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 15:01:03.853634 (XEN) common/grant_table.c:1909:d6v1 Expanding d6 grant table from 1 to 2 frames Oct 3 15:01:06.913768 (XEN) common/grant_table.c:1909:d6v1 Expanding d6 grant table from 2 to 3 frames Oct 3 15:01:06.913768 [ 2446.797964] vif vif-6-0 vif6.0: Guest Rx ready Oct 3 15:01:06.973627 [ 2446.803343] xenbr0: port 2(vif6.0) entered blocking state Oct 3 15:01:06.985662 [ 2446.807427] xenbr0: port 2(vif6.0) entered forwarding state Oct 3 15:01:06.985662 [ 2477.326360] xenbr0: port 2(vif6.0) entered disabled state Oct 3 15:01:37.508806 [ 2477.558052] xenbr0: port 2(vif6.0) entered disabled state Oct 3 15:01:37.736910 [ 2477.564333] vif vif-6-0 vif6.0 (unregistering): left allmulticast mode Oct 3 15:01:37.748917 [ 2477.569603] vif vif-6-0 vif6.0 (unregistering): left promiscuous mode Oct 3 15:01:37.748917 [ 2477.576029] xenbr0: port 2(vif6.0) entered disabled state Oct 3 15:01:37.760933 [ 2530.467152] EXT4-fs (dm-2): unmounting filesystem 2e95cbcb-d578-47ae-8071-a8eaa125bca7. Oct 3 15:02:30.653628 [ 2531.757318] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 15:02:31.937778 [ 2531.888038] EXT4-fs (dm-2): mounted filesystem 2e95cbcb-d578-47ae-8071-a8eaa125bca7 r/w with ordered data mode. Quota mode: disabled. Oct 3 15:02:32.077620 [ 2533.122566] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 15:02:33.313604 [ 2533.152402] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 15:02:33.325630 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 15:02:37.885742 [ 2540.762453] xenbr0: port 2(vif7.0) entered blocking state Oct 3 15:02:40.933735 [ 2540.766495] xenbr0: port 2(vif7.0) entered disabled state Oct 3 15:02:40.945753 [ 2540.772039] vif vif-7-0 vif7.0: entered allmulticast mode Oct 3 15:02:40.945787 [ 2540.777645] vif vif-7-0 vif7.0: entered promiscuous mode Oct 3 15:02:40.957692 (XEN) d7v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 15:02:45.157618 (XEN) d7v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 15:02:45.265629 (XEN) d7v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 15:02:45.313871 (XEN) common/grant_table.c:1909:d7v0 Expanding d7 grant table from 1 to 2 frames Oct 3 15:02:48.353011 (XEN) common/grant_table.c:1909:d7v0 Expanding d7 grant table from 2 to 3 frames Oct 3 15:02:48.353150 [ 2548.258660] vif vif-7-0 vif7.0: Guest Rx ready Oct 3 15:02:48.436468 [ 2548.262030] xenbr0: port 2(vif7.0) entered blocking state Oct 3 15:02:48.448940 [ 2548.267265] xenbr0: port 2(vif7.0) entered forwarding state Oct 3 15:02:48.448960 [ 2578.820586] xenbr0: port 2(vif7.0) entered disabled state Oct 3 15:03:19.001634 [ 2579.109305] xenbr0: port 2(vif7.0) entered disabled state Oct 3 15:03:19.289684 [ 2579.114505] vif vif-7-0 vif7.0 (unregistering): left allmulticast mode Oct 3 15:03:19.289710 [ 2579.120040] vif vif-7-0 vif7.0 (unregistering): left promiscuous mode Oct 3 15:03:19.301672 [ 2579.126488] xenbr0: port 2(vif7.0) entered disabled state Oct 3 15:03:19.301707 [ 2631.031353] EXT4-fs (dm-2): unmounting filesystem 2e95cbcb-d578-47ae-8071-a8eaa125bca7. Oct 3 15:04:11.213713 [ 2632.328834] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 15:04:12.509699 [ 2632.459519] EXT4-fs (dm-2): mounted filesystem 2e95cbcb-d578-47ae-8071-a8eaa125bca7 r/w with ordered data mode. Quota mode: disabled. Oct 3 15:04:12.641702 [ 2633.694734] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 15:04:13.880836 [ 2633.712330] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 15:04:13.892846 [ 2641.440510] xenbr0: port 2(vif8.0) entered blocking state Oct 3 15:04:21.621776 [ 2641.444548] xenbr0: port 2(vif8.0) entered disabled state Oct 3 15:04:21.621848 [ 2641.450093] vif vif-8-0 vif8.0: entered allmulticast mode Oct 3 15:04:21.633684 [ 2641.455664] vif vif-8-0 vif8.0: entered promiscuous mode Oct 3 15:04:21.633684 (XEN) d8v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 15:04:25.833818 (XEN) d8v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 15:04:25.965665 (XEN) d8v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 15:04:26.013585 (XEN) common/grant_table.c:1909:d8v0 Expanding d8 grant table from 1 to 2 frames Oct 3 15:04:29.013725 (XEN) common/grant_table.c:1909:d8v0 Expanding d8 grant table from 2 to 3 frames Oct 3 15:04:29.025609 [ 2648.895034] vif vif-8-0 vif8.0: Guest Rx ready Oct 3 15:04:29.073691 [ 2648.898358] xenbr0: port 2(vif8.0) entered blocking state Oct 3 15:04:29.073727 [ 2648.903585] xenbr0: port 2(vif8.0) entered forwarding state Oct 3 15:04:29.085624 [ 2680.147992] xenbr0: port 2(vif8.0) entered disabled state Oct 3 15:05:00.321090 [ 2680.367958] xenbr0: port 2(vif8.0) entered disabled state Oct 3 15:05:00.540846 [ 2680.373725] vif vif-8-0 vif8.0 (unregistering): left allmulticast mode Oct 3 15:05:00.552886 [ 2680.378965] vif vif-8-0 vif8.0 (unregistering): left promiscuous mode Oct 3 15:05:00.564858 [ 2680.385409] xenbr0: port 2(vif8.0) entered disabled state Oct 3 15:05:00.564858 [ 2733.538114] EXT4-fs (dm-2): unmounting filesystem 2e95cbcb-d578-47ae-8071-a8eaa125bca7. Oct 3 15:05:53.721661 [ 2734.855785] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 15:05:55.029716 [ 2734.986659] EXT4-fs (dm-2): mounted filesystem 2e95cbcb-d578-47ae-8071-a8eaa125bca7 r/w with ordered data mode. Quota mode: disabled. Oct 3 15:05:55.173660 [ 2736.228751] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 15:05:56.409795 [ 2736.250685] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 15:05:56.421714 [ 2743.968802] xenbr0: port 2(vif9.0) entered blocking state Oct 3 15:06:04.149683 [ 2743.972837] xenbr0: port 2(vif9.0) entered disabled state Oct 3 15:06:04.149736 [ 2743.978357] vif vif-9-0 vif9.0: entered allmulticast mode Oct 3 15:06:04.161759 [ 2743.983934] vif vif-9-0 vif9.0: entered promiscuous mode Oct 3 15:06:04.161843 (XEN) d9v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 15:06:08.361729 (XEN) d9v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 15:06:08.481635 (XEN) d9v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 15:06:08.517714 (XEN) common/grant_table.c:1909:d9v0 Expanding d9 grant table from 1 to 2 frames Oct 3 15:06:11.541853 (XEN) common/grant_table.c:1909:d9v0 Expanding d9 grant table from 2 to 3 frames Oct 3 15:06:11.553761 [ 2751.451726] vif vif-9-0 vif9.0: Guest Rx ready Oct 3 15:06:11.625835 [ 2751.455236] xenbr0: port 2(vif9.0) entered blocking state Oct 3 15:06:11.625901 [ 2751.460450] xenbr0: port 2(vif9.0) entered forwarding state Oct 3 15:06:11.637738 [ 2786.263158] xenbr0: port 2(vif9.0) entered disabled state Oct 3 15:06:46.445580 [ 2786.431031] xenbr0: port 2(vif9.0) entered disabled state Oct 3 15:06:46.613695 [ 2786.435821] vif vif-9-0 vif9.0 (unregistering): left allmulticast mode Oct 3 15:06:46.613731 [ 2786.441813] vif vif-9-0 vif9.0 (unregistering): left promiscuous mode Oct 3 15:06:46.625704 [ 2786.448271] xenbr0: port 2(vif9.0) entered disabled state Oct 3 15:06:46.625788 [ 2839.525906] EXT4-fs (dm-2): unmounting filesystem 2e95cbcb-d578-47ae-8071-a8eaa125bca7. Oct 3 15:07:39.705701 [ 2840.816383] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 15:07:40.989757 [ 2840.947276] EXT4-fs (dm-2): mounted filesystem 2e95cbcb-d578-47ae-8071-a8eaa125bca7 r/w with ordered data mode. Quota mode: disabled. Oct 3 15:07:41.133631 [ 2842.199878] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 15:07:42.384932 [ 2842.222870] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 15:07:42.396919 [ 2849.903111] xenbr0: port 2(vif10.0) entered blocking state Oct 3 15:07:50.085758 [ 2849.907237] xenbr0: port 2(vif10.0) entered disabled state Oct 3 15:07:50.085841 [ 2849.912869] vif vif-10-0 vif10.0: entered allmulticast mode Oct 3 15:07:50.085892 [ 2849.918647] vif vif-10-0 vif10.0: entered promiscuous mode Oct 3 15:07:50.097605 (XEN) d10v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 15:07:54.293691 (XEN) d10v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 15:07:54.401796 (XEN) d10v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 15:07:54.449622 (XEN) common/grant_table.c:1909:d10v1 Expanding d10 grant table from 1 to 2 frames Oct 3 15:07:57.521755 (XEN) common/grant_table.c:1909:d10v1 Expanding d10 grant table from 2 to 3 frames Oct 3 15:07:57.521829 [ 2857.409914] vif vif-10-0 vif10.0: Guest Rx ready Oct 3 15:07:57.581597 [ 2857.413599] xenbr0: port 2(vif10.0) entered blocking state Oct 3 15:07:57.593658 [ 2857.418790] xenbr0: port 2(vif10.0) entered forwarding state Oct 3 15:07:57.593658 [ 2887.646075] xenbr0: port 2(vif10.0) entered disabled state Oct 3 15:08:27.821634 [ 2887.817775] xenbr0: port 2(vif10.0) entered disabled state Oct 3 15:08:27.989713 [ 2887.822352] vif vif-10-0 vif10.0 (unregistering): left allmulticast mode Oct 3 15:08:28.001734 [ 2887.828707] vif vif-10-0 vif10.0 (unregistering): left promiscuous mode Oct 3 15:08:28.001770 [ 2887.835357] xenbr0: port 2(vif10.0) entered disabled state Oct 3 15:08:28.013648 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 15:09:18.769641 [ 2941.326890] EXT4-fs (dm-2): unmounting filesystem 2e95cbcb-d578-47ae-8071-a8eaa125bca7. Oct 3 15:09:21.509706 [ 2942.621490] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 15:09:22.793718 [ 2942.752214] EXT4-fs (dm-2): mounted filesystem 2e95cbcb-d578-47ae-8071-a8eaa125bca7 r/w with ordered data mode. Quota mode: disabled. Oct 3 15:09:22.929742 [ 2944.013258] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 15:09:24.201676 [ 2944.038347] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 15:09:24.217817 [ 2951.705574] xenbr0: port 2(vif11.0) entered blocking state Oct 3 15:09:31.877816 [ 2951.709766] xenbr0: port 2(vif11.0) entered disabled state Oct 3 15:09:31.889751 [ 2951.715279] vif vif-11-0 vif11.0: entered allmulticast mode Oct 3 15:09:31.889816 [ 2951.721120] vif vif-11-0 vif11.0: entered promiscuous mode Oct 3 15:09:31.889867 (XEN) d11v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 15:09:36.109746 (XEN) d11v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 15:09:36.229671 (XEN) d11v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 15:09:36.265808 (XEN) common/grant_table.c:1909:d11v0 Expanding d11 grant table from 1 to 2 frames Oct 3 15:09:39.321838 (XEN) common/grant_table.c:1909:d11v0 Expanding d11 grant table from 2 to 3 frames Oct 3 15:09:39.333692 [ 2959.208552] vif vif-11-0 vif11.0: Guest Rx ready Oct 3 15:09:39.381764 [ 2959.212064] xenbr0: port 2(vif11.0) entered blocking state Oct 3 15:09:39.393745 [ 2959.217739] xenbr0: port 2(vif11.0) entered forwarding state Oct 3 15:09:39.393810 [ 2989.684994] xenbr0: port 2(vif11.0) entered disabled state Oct 3 15:10:09.857667 [ 2989.887866] xenbr0: port 2(vif11.0) entered disabled state Oct 3 15:10:10.066105 [ 2989.893329] vif vif-11-0 vif11.0 (unregistering): left allmulticast mode Oct 3 15:10:10.066177 [ 2989.898852] vif vif-11-0 vif11.0 (unregistering): left promiscuous mode Oct 3 15:10:10.078105 [ 2989.905480] xenbr0: port 2(vif11.0) entered disabled state Oct 3 15:10:10.078168 [ 3041.947991] EXT4-fs (dm-2): unmounting filesystem 2e95cbcb-d578-47ae-8071-a8eaa125bca7. Oct 3 15:11:02.125686 [ 3043.248526] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 15:11:03.421765 [ 3043.379253] EXT4-fs (dm-2): mounted filesystem 2e95cbcb-d578-47ae-8071-a8eaa125bca7 r/w with ordered data mode. Quota mode: disabled. Oct 3 15:11:03.565609 [ 3044.607710] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 15:11:04.789763 [ 3044.633156] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 15:11:04.801721 [ 3052.361482] xenbr0: port 2(vif12.0) entered blocking state Oct 3 15:11:12.541752 [ 3052.365607] xenbr0: port 2(vif12.0) entered disabled state Oct 3 15:11:12.541829 [ 3052.371213] vif vif-12-0 vif12.0: entered allmulticast mode Oct 3 15:11:12.553733 [ 3052.376962] vif vif-12-0 vif12.0: entered promiscuous mode Oct 3 15:11:12.553799 (XEN) d12v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 15:11:16.761722 (XEN) d12v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 15:11:16.869781 (XEN) d12v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 15:11:16.917709 (XEN) common/grant_table.c:1909:d12v0 Expanding d12 grant table from 1 to 2 frames Oct 3 15:11:19.965781 (XEN) common/grant_table.c:1909:d12v0 Expanding d12 grant table from 2 to 3 frames Oct 3 15:11:19.977734 [ 3059.859213] vif vif-12-0 vif12.0: Guest Rx ready Oct 3 15:11:20.037779 [ 3059.862783] xenbr0: port 2(vif12.0) entered blocking state Oct 3 15:11:20.037884 [ 3059.868082] xenbr0: port 2(vif12.0) entered forwarding state Oct 3 15:11:20.049699 [ 3094.090098] xenbr0: port 2(vif12.0) entered disabled state Oct 3 15:11:54.257703 [ 3094.278042] xenbr0: port 2(vif12.0) entered disabled state Oct 3 15:11:54.449740 [ 3094.283100] vif vif-12-0 vif12.0 (unregistering): left allmulticast mode Oct 3 15:11:54.461713 [ 3094.289034] vif vif-12-0 vif12.0 (unregistering): left promiscuous mode Oct 3 15:11:54.461750 [ 3094.295648] xenbr0: port 2(vif12.0) entered disabled state Oct 3 15:11:54.473611 [ 3148.197310] EXT4-fs (dm-2): unmounting filesystem 2e95cbcb-d578-47ae-8071-a8eaa125bca7. Oct 3 15:12:48.369821 [ 3149.486916] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Oct 3 15:12:49.665627 [ 3149.617653] EXT4-fs (dm-2): mounted filesystem 2e95cbcb-d578-47ae-8071-a8eaa125bca7 r/w with ordered data mode. Quota mode: disabled. Oct 3 15:12:49.797701 [ 3150.835788] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Oct 3 15:12:51.013553 [ 3150.859375] xvda: xvda1 xvda2 xvda3 < xvda5 > Oct 3 15:12:51.035680 [ 3158.558299] xenbr0: port 2(vif13.0) entered blocking state Oct 3 15:12:58.737801 [ 3158.562422] xenbr0: port 2(vif13.0) entered disabled state Oct 3 15:12:58.737884 [ 3158.568051] vif vif-13-0 vif13.0: entered allmulticast mode Oct 3 15:12:58.737934 [ 3158.573796] vif vif-13-0 vif13.0: entered promiscuous mode Oct 3 15:12:58.749614 (XEN) d13v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 15:13:02.953763 (XEN) d13v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 15:13:03.061756 (XEN) d13v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 15:13:03.109742 (XEN) common/grant_table.c:1909:d13v0 Expanding d13 grant table from 1 to 2 frames Oct 3 15:13:06.217766 (XEN) common/grant_table.c:1909:d13v0 Expanding d13 grant table from 2 to 3 frames Oct 3 15:13:06.229716 [ 3166.091273] vif vif-13-0 vif13.0: Guest Rx ready Oct 3 15:13:06.265772 [ 3166.096143] xenbr0: port 2(vif13.0) entered blocking state Oct 3 15:13:06.265836 [ 3166.102837] xenbr0: port 2(vif13.0) entered forwarding state Oct 3 15:13:06.277688 [ 3197.536696] xenbr0: port 2(vif13.0) entered disabled state Oct 3 15:13:37.713710 [ 3197.669376] xenbr0: port 2(vif13.0) entered disabled state Oct 3 15:13:37.845760 [ 3197.674842] vif vif-13-0 vif13.0 (unregistering): left allmulticast mode Oct 3 15:13:37.845834 [ 3197.680339] vif vif-13-0 vif13.0 (unregistering): left promiscuous mode Oct 3 15:13:37.857747 [ 3197.686982] xenbr0: port 2(vif13.0) entered disabled state Oct 3 15:13:37.857810 [ 3200.730810] EXT4-fs (dm-2): unmounting filesystem 2e95cbcb-d578-47ae-8071-a8eaa125bca7. Oct 3 15:13:40.905740 Oct 3 15:13:59.699832 (XEN) *** Serial input to Xen (type 'CTRL-x' three times to switch input) Oct 3 15:13:59.717710 Oct 3 15:13:59.718623 Oct 3 15:14:00.707749 (XEN) '0' pressed -> dumping Dom0's registers Oct 3 15:14:00.737930 (XEN) *** Dumping Dom0 vcpu#0 state: *** Oct 3 15:14:00.738005 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Oct 3 15:14:00.740476 Not tainted ]---- Oct 3 15:14:00.749756 (XEN) CPU: 0 Oct 3 15:14:00.749777 (XEN) PC: c031a828 Oct 3 15:14:00.749836 (XEN) CPSR: 60030093 MODE:32-bit Guest SVC Oct 3 15:14:00.749896 (XEN) R0: 00000005 R1: 00000000 R2: 0051a289 R3: c031a820 Oct 3 15:14:00.761764 (XEN) R4: c1b09d40 R5: c1d29660 R6: c1b04e5c R7: c1b04e9c Oct 3 15:14:00.761843 (XEN) R8: 00000000 R9: 00000000 R10:000000a9 R11:00000000 R12:c1d28a00 Oct 3 15:14:00.773761 (XEN) USR: SP: be886108 LR: b6a1306d Oct 3 15:14:00.773845 (XEN) SVC: SP: c1b01f78 LR: c1185b00 SPSR:60030013 Oct 3 15:14:00.773850 (XEN) ABT: SP: c1d3ab10 LR: c0301040 SPSR:600b0193 Oct 3 15:14:00.785763 (XEN) UND: SP: c1d3ab20 LR: c0300fc0 SPSR:60030093 Oct 3 15:14:00.785855 (XEN) IRQ: SP: c1d3ab00 LR: c0300bc0 SPSR:60030193 Oct 3 15:14:00.797754 (XEN) FIQ: SP: c1d3ab30 LR: c1d3ab30 SPSR:00000000 Oct 3 15:14:00.797829 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 15:14:00.797845 (XEN) Oct 3 15:14:00.809757 (XEN) SCTLR: 10c5387d Oct 3 15:14:00.809837 (XEN) TCR: 00000000 Oct 3 15:14:00.809839 (XEN) TTBR0: 00000000664e006a Oct 3 15:14:00.809926 (XEN) TTBR1: 000000006020406a Oct 3 15:14:00.809936 (XEN) IFAR: b6e7a814, IFSR: 00000007 Oct 3 15:14:00.821748 (XEN) DFAR: b6b67fd2, DFSR: 00000017 Oct 3 15:14:00.821828 (XEN) Oct 3 15:14:00.821831 (XEN) VTCR_EL2: 80003558 Oct 3 15:14:00.821885 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 15:14:00.833761 (XEN) Oct 3 15:14:00.833791 (XEN) SCTLR_EL2: 30cd187f Oct 3 15:14:00.833844 (XEN) HCR_EL2: 007c663f Oct 3 15:14:00.833901 (XEN) TTBR0_EL2: 000000004110e000 Oct 3 15:14:00.833961 (XEN) Oct 3 15:14:00.833973 (XEN) ESR_EL2: 07e00000 Oct 3 15:14:00.845764 (XEN) HPFAR_EL2: 00104810 Oct 3 15:14:00.845796 (XEN) HDFAR: e0807f00 Oct 3 15:14:00.845850 (XEN) HIFAR: c141f698 Oct 3 15:14:00.845907 (XEN) Oct 3 15:14:00.845963 (XEN) Guest stack trace from sp=c1b01f78: Oct 3 15:14:00.857760 (XEN) Failed to convert stack to physical address Oct 3 15:14:00.857799 (XEN) *** Dumping Dom0 vcpu#1 state: *** Oct 3 15:14:00.857851 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 15:14:00.869753 (XEN) CPU: 0 Oct 3 15:14:00.869790 (XEN) PC: c031a828 Oct 3 15:14:00.869848 (XEN) CPSR: 600f0093 MODE:32-bit Guest SVC Oct 3 15:14:00.869924 (XEN) R0: 00000005 R1: 00000000 R2: 003b4109 R3: c031a820 Oct 3 15:14:00.881745 (XEN) R4: c2110880 R5: c1d29660 R6: c1b04e5c R7: c1b04e9c Oct 3 15:14:00.881820 (XEN) R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:c1d28a00 Oct 3 15:14:00.897050 (XEN) USR: SP: be841960 LR: b6e346c5 Oct 3 15:14:00.897101 (XEN) SVC: SP: e08d9fa0 LR: c1185b00 SPSR:600f0013 Oct 3 15:14:00.897101 (XEN) ABT: SP: c1d3ab50 LR: c0300ec0 SPSR:600f0193 Oct 3 15:14:00.905691 (XEN) UND: SP: c1d3ab60 LR: c0300fc0 SPSR:600d0093 Oct 3 15:14:00.917752 (XEN) IRQ: SP: c1d3ab40 LR: c0300bc0 SPSR:600f0193 Oct 3 15:14:00.917843 (XEN) FIQ: SP: c1d3ab70 LR: c1d3ab70 SPSR:00000000 Oct 3 15:14:00.917843 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 15:14:00.929760 (XEN) Oct 3 15:14:00.929760 (XEN) SCTLR: 10c5387d Oct 3 15:14:00.929855 (XEN) TCR: 00000000 Oct 3 15:14:00.929913 (XEN) TTBR0: 000000006705406a Oct 3 15:14:00.941754 (XEN) TTBR1: 000000006020406a Oct 3 15:14:00.941754 (XEN) IFAR: b6db02f4, IFSR: 00000007 Oct 3 15:14:00.941852 (XEN) DFAR: 004dd318, DFSR: 0000081f Oct 3 15:14:00.941938 (XEN) Oct 3 15:14:00.953765 (XEN) VTCR_EL2: 80003558 Oct 3 15:14:00.953846 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 15:14:00.953926 (XEN) Oct 3 15:14:00.953948 (XEN) SCTLR_EL2: 30cd187f Oct 3 15:14:00.953948 (XEN) HCR_EL2: 007c663f Oct 3 15:14:00.953948 (XEN) TTBR0_EL2: 000000004110e000 Oct 3 15:14:00.965764 (XEN) Oct 3 15:14:00.965844 (XEN) ESR_EL2: 07e00000 Oct 3 15:14:00.965844 (XEN) HPFAR_EL2: 00104810 Oct 3 15:14:00.965960 (XEN) HDFAR: e0807f00 Oct 3 15:14:00.965990 (XEN) HIFAR: c141f698 Oct 3 15:14:00.977743 (XEN) Oct 3 15:14:00.977828 (XEN) Guest stack trace from sp=e08d9fa0: Oct 3 15:14:00.977828 (XEN) Failed to convert stack to physical address Oct 3 15:14:00.977886 Oct 3 15:14:02.717821 (XEN) 'H' pressed -> dumping heap info (now = 3227940704458) Oct 3 15:14:02.733719 (XEN) heap[node=0][zone=0] -> 16279 pages Oct 3 15:14:02.733719 (XEN) heap[node=0][zone=1] -> Oct 3 15:14:02.734945 0 pages Oct 3 15:14:02.745591 (XEN) heap[node=0][zone=2] -> 0 pages Oct 3 15:14:02.745591 (XEN) heap[node=0][zone=3] -> 0 pages Oct 3 15:14:02.745591 (XEN) heap[node=0][zone=4] -> 0 pages Oct 3 15:14:02.745591 (XEN) heap[node=0][zone=5] -> 0 pages Oct 3 15:14:02.757635 (XEN) heap[node=0][zone=6] -> 0 pages Oct 3 15:14:02.757635 (XEN) heap[node=0][zone=7] -> 0 pages Oct 3 15:14:02.757635 (XEN) heap[node=0][zone=8] -> 0 pages Oct 3 15:14:02.769636 (XEN) heap[node=0][zone=9] -> 0 pages Oct 3 15:14:02.769636 (XEN) heap[node=0][zone=10] -> 0 pages Oct 3 15:14:02.769874 (XEN) heap[node=0][zone=11] -> 0 pages Oct 3 15:14:02.769915 (XEN) heap[node=0][zone=12] -> 0 pages Oct 3 15:14:02.781698 (XEN) heap[node=0][zone=13] -> 0 pages Oct 3 15:14:02.781698 (XEN) heap[node=0][zone=14] -> 0 pages Oct 3 15:14:02.781698 (XEN) heap[node=0][zone=15] -> 0 pages Oct 3 15:14:02.789639 (XEN) heap[node=0][zone=16] -> 0 pages Oct 3 15:14:02.789639 (XEN) heap[node=0][zone=17] -> 0 pages Oct 3 15:14:02.789639 (XEN) heap[node=0][zone=18] -> 0 pages Oct 3 15:14:02.801817 (XEN) heap[node=0][zone=19] -> 130835 pages Oct 3 15:14:02.801922 (XEN) heap[node=0][zone=20] -> 241599 pages Oct 3 15:14:02.802001 (XEN) heap[node=0][zone=21] -> 0 pages Oct 3 15:14:02.813751 (XEN) heap[node=0][zone=22] -> 0 pages Oct 3 15:14:02.813751 (XEN) heap[node=0][zone=23] -> 0 pages Oct 3 15:14:02.813751 (XEN) heap[node=0][zone=24] -> 0 pages Oct 3 15:14:02.825798 (XEN) heap[node=0][zone=25] -> 0 pages Oct 3 15:14:02.825862 (XEN) heap[node=0][zone=26] -> 0 pages Oct 3 15:14:02.825908 (XEN) heap[node=0][zone=27] -> 0 pages Oct 3 15:14:02.825951 (XEN) heap[node=0][zone=28] -> 0 pages Oct 3 15:14:02.837685 Oct 3 15:14:04.721638 Oct 3 15:14:06.487574 Oct 3 15:14:06.727895 Oct 3 15:14:08.493711 Oct 3 15:14:08.711719 (XEN) Dumping timer queues: Oct 3 15:14:08.729775 (XEN) CPU00: Oct 3 15:14:08.729827 (XEN) ex= 180969us timer=43fdc968 cb=vtimer.c#virt_timer_expired(43fdc960) Oct 3 15:14:08.729883 (XEN) CPU Oct 3 15:14:08.731625 01: Oct 3 15:14:08.741601 (XEN) ex= 27217us timer=43fee968 cb=vtimer.c#virt_timer_expired(43fee960) Oct 3 15:14:08.741637 Oct 3 15:14:10.726467 Oct 3 15:14:12.501296 Oct 3 15:14:12.690117 (XEN) 'd' pressed -> dumping registers Oct 3 15:14:12.709927 (XEN) Oct 3 15:14:12.709927 (XEN) *** Dumping CPU0 host state: *** Oct 3 15:14:12.709927 (XEN) ----[ Xen-4.20-unstable arm32 debug=y N Oct 3 15:14:12.712071 ot tainted ]---- Oct 3 15:14:12.721700 (XEN) CPU: 0 Oct 3 15:14:12.721700 (XEN) PC: 0025f53c domain.c#idle_loop+0x130/0x1ac Oct 3 15:14:12.721700 (XEN) CPSR: 600f005a MODE:Hypervisor Oct 3 15:14:12.721712 (XEN) R0: 00000000 R1: 00000001 R2: 00000000 R3: 00000000 Oct 3 15:14:12.733716 (XEN) R4: 00000000 R5: 003000e0 R6: 00331324 R7: 00000001 Oct 3 15:14:12.733716 (XEN) R8: 00331104 R9: 00000000 R10:40e00000 R11:4003ff54 R12:fffffffc Oct 3 15:14:12.745781 (XEN) HYP: SP: 4003ff44 LR: 00225b7c Oct 3 15:14:12.745824 (XEN) Oct 3 15:14:12.745863 (XEN) VTCR_EL2: 80003558 Oct 3 15:14:12.745905 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 15:14:12.757796 (XEN) Oct 3 15:14:12.757796 (XEN) SCTLR_EL2: 30cd187f Oct 3 15:14:12.757831 (XEN) HCR_EL2: 007c663f Oct 3 15:14:12.757854 (XEN) TTBR0_EL2: 000000004110e000 Oct 3 15:14:12.757877 (XEN) Oct 3 15:14:12.757898 (XEN) ESR_EL2: 07e00000 Oct 3 15:14:12.769939 (XEN) HPFAR_EL2: 00104810 Oct 3 15:14:12.769997 (XEN) HDFAR: e0807f00 Oct 3 15:14:12.770040 (XEN) HIFAR: c141f698 Oct 3 15:14:12.770081 (XEN) Oct 3 15:14:12.770120 (XEN) Xen stack trace from sp=4003ff44: Oct 3 15:14:12.781735 (XEN) 07e00000 00295014 002919bc 4003ff4c 002678fc 00000000 00000000 00000000 Oct 3 15:14:12.781735 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 15:14:12.793807 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 15:14:12.793807 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 15:14:12.805808 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 15:14:12.817812 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 15:14:12.817812 (XEN) Xen call trace: Oct 3 15:14:12.817843 (XEN) [<0025f53c>] domain.c#idle_loop+0x130/0x1ac (PC) Oct 3 15:14:12.829734 (XEN) [<00225b7c>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 15:14:12.829734 (XEN) [<002678fc>] arch_get_xen_caps+0/0x90 Oct 3 15:14:12.829734 (XEN) Oct 3 15:14:12.841805 (XEN) *** Dumping CPU1 host state: *** Oct 3 15:14:12.841805 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 15:14:12.841848 (XEN) CPU: 1 Oct 3 15:14:12.841888 (XEN) PC: 0025f53c domain.c#idle_loop+0x130/0x1ac Oct 3 15:14:12.853806 (XEN) CPSR: 6007005a MODE:Hypervisor Oct 3 15:14:12.853809 (XEN) R0: 00000000 R1: 00000001 R2: 3fd06000 R3: 00000000 Oct 3 15:14:12.865976 (XEN) R4: 00000001 R5: 003000e0 R6: 00331324 R7: 00000002 Oct 3 15:14:12.866039 (XEN) R8: 00331104 R9: 00000001 R10:40e00000 R11:4000ff54 R12:fffffffc Oct 3 15:14:12.877820 (XEN) HYP: SP: 4000ff44 LR: 00225b7c Oct 3 15:14:12.877820 (XEN) Oct 3 15:14:12.877857 (XEN) VTCR_EL2: 80003558 Oct 3 15:14:12.877900 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 15:14:12.877942 (XEN) Oct 3 15:14:12.877981 (XEN) SCTLR_EL2: 30cd187f Oct 3 15:14:12.889895 (XEN) HCR_EL2: 007c663f Oct 3 15:14:12.889895 (XEN) TTBR0_EL2: 00000000ba004000 Oct 3 15:14:12.889895 (XEN) Oct 3 15:14:12.889898 (XEN) ESR_EL2: 07e00000 Oct 3 15:14:12.889939 (XEN) HPFAR_EL2: 00104810 Oct 3 15:14:12.901715 (XEN) HDFAR: e0807f00 Oct 3 15:14:12.901772 (XEN) HIFAR: c0c0a630 Oct 3 15:14:12.901815 (XEN) Oct 3 15:14:12.901854 (XEN) Xen stack trace from sp=4000ff44: Oct 3 15:14:12.901899 (XEN) 07e00000 00301290 00000001 4000ff3c 002681e0 00000000 00000000 00000000 Oct 3 15:14:12.913751 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 15:14:12.925741 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 15:14:12.925804 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 15:14:12.937752 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 15:14:12.937814 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 15:14:12.949760 (XEN) Xen call trace: Oct 3 15:14:12.949816 (XEN) [<0025f53c>] domain.c#idle_loop+0x130/0x1ac (PC) Oct 3 15:14:12.949866 (XEN) [<00225b7c>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 15:14:12.961735 (XEN) [<002681e0>] start_secondary+0x204/0x20c Oct 3 15:14:12.961797 (XEN) Oct 3 15:14:12.961837 Oct 3 15:14:14.746527 (XEN) 'e' pressed -> dumping event-channel info Oct 3 15:14:14.761791 (XEN) Event channel information for domain 0: Oct 3 15:14:14.761880 (XEN) Polling vCPUs: {} Oct 3 15:14:14.761926 (XEN) port Oct 3 15:14:14.763646 [p/m/s] Oct 3 15:14:14.773712 (XEN) 1 [0/0/ - ]: s=3 n=1 x=0 d=0 p=4 Oct 3 15:14:14.773769 (XEN) 2 [0/0/ - ]: s=5 n=0 x=0 v=2 Oct 3 15:14:14.773815 (XEN) 3 [0/0/ - ]: s=5 n=1 x=0 v=3 Oct 3 15:14:14.785643 (XEN) 4 [0/0/ - ]: s=3 n=0 x=0 d=0 p=1 Oct 3 15:14:14.785643 Oct 3 15:14:16.760544 (XEN) gnttab_usage_print_all [ key 'g' pressed Oct 3 15:14:16.785817 (XEN) -------- active -------- -------- shared -------- Oct 3 15:14:16.785895 (XEN) [ref] localdo Oct 3 15:14:16.788136 m mfn pin localdom gmfn flags Oct 3 15:14:16.797719 (XEN) grant-table for remote d0 (v1) Oct 3 15:14:16.797775 (XEN) 1 frames (64 max), 2 maptrack frames (1024 max) Oct 3 15:14:16.809745 (XEN) no active grant table entries Oct 3 15:14:16.809803 (XEN) gnttab_usage_print_all ] done Oct 3 15:14:16.809849 Oct 3 15:14:18.746080 Oct 3 15:14:20.522288 Oct 3 15:14:20.764083 (XEN) Physical memory information: Oct 3 15:14:20.781813 (XEN) Xen heap: 65116kB free Oct 3 15:14:20.781813 (XEN) heap[19]: 523340kB free Oct 3 15:14:20.781813 (XEN) heap[20]: 966396kB fr Oct 3 15:14:20.784088 ee Oct 3 15:14:20.793681 (XEN) Dom heap: 1489736kB free Oct 3 15:14:20.793744 Oct 3 15:14:22.763723 Oct 3 15:14:24.536200 Oct 3 15:14:24.775910 (XEN) sched_smt_power_savings: disabled Oct 3 15:14:24.797805 (XEN) NOW=3250004916333 Oct 3 15:14:24.797865 (XEN) Online Cpus: 0-1 Oct 3 15:14:24.797909 (XEN) Cpupool 0: Oct 3 15:14:24.797949 (XEN) Cpus: 0-1 Oct 3 15:14:24.797989 (XEN) Sched Oct 3 15:14:24.799774 uling granularity: cpu, 1 CPU per sched-resource Oct 3 15:14:24.812923 (XEN) Scheduler: SMP Credit Scheduler rev2 (credit2) Oct 3 15:14:24.812923 (XEN) Active queues: 1 Oct 3 15:14:24.812923 (XEN) default-weight = 256 Oct 3 15:14:24.812923 (XEN) Runqueue 0: Oct 3 15:14:24.824917 (XEN) ncpus = 2 Oct 3 15:14:24.824917 (XEN) cpus = 0-1 Oct 3 15:14:24.824917 (XEN) max_weight = 256 Oct 3 15:14:24.824917 (XEN) pick_bias = 0 Oct 3 15:14:24.824917 (XEN) instload = 0 Oct 3 15:14:24.836865 (XEN) aveload = 1485 (~0%) Oct 3 15:14:24.836865 (XEN) idlers: 2 Oct 3 15:14:24.836865 (XEN) tickled: 0 Oct 3 15:14:24.836865 (XEN) fully idle cores: 2 Oct 3 15:14:24.836865 (XEN) Domain info: Oct 3 15:14:24.848890 (XEN) Domain: 0 w 256 c 0 v 2 Oct 3 15:14:24.848890 (XEN) 1: [0.0] flags=0 cpu=1 credit=3524215 [w=256] load=1924 (~0%) Oct 3 15:14:24.848890 (XEN) 2: [0.1] flags=0 cpu=0 credit=9171750 [w=256] load=428 (~0%) Oct 3 15:14:24.860853 (XEN) Runqueue 0: Oct 3 15:14:24.860853 (XEN) CPU[00] runq=0, sibling={0}, core={0-1} Oct 3 15:14:24.860853 (XEN) CPU[01] runq=0, sibling={1}, core={0-1} Oct 3 15:14:24.872838 (XEN) run: [0.0] flags=2 cpu=1 credit=3524215 [w=256] load=1899 (~0%) Oct 3 15:14:24.872838 (XEN) RUNQ: Oct 3 15:14:24.872838 (XEN) CPUs info: Oct 3 15:14:24.872838 (XEN) CPU[00] current=d[IDLE]v0, curr=d[IDLE]v0, prev=NULL Oct 3 15:14:24.884747 (XEN) CPU[01] current=d[IDLE]v1, curr=d[IDLE]v1, prev=NULL Oct 3 15:14:24.884747 Oct 3 15:14:36.785377 Oct 3 15:14:38.538612 Oct 3 15:14:38.772757 (XEN) Synced stime skew: max=125ns avg=125ns samples=1 current=125ns Oct 3 15:14:38.789774 (XEN) Synced cycles skew: max=4 avg=4 samples=1 current=4 Oct 3 15:14:38.789807 Oct 3 15:14:38.791057 Oct 3 15:14:40.780863 Oct 3 15:14:42.555603 Oct 3 15:14:42.791424 Oct 3 15:14:44.568311 Oct 3 15:14:44.795627 Oct 3 15:14:46.577422 Oct 3 15:14:56.855673 (XEN) 'q' pressed -> dumping domain info (now = 3282084446875) Oct 3 15:14:56.877041 (XEN) General information for domain 0: Oct 3 15:14:56.877041 (XEN) refcnt=3 dying=0 paus Oct 3 15:14:56.879362 e_count=0 Oct 3 15:14:56.888795 (XEN) nr_pages=131072 xenheap_pages=2 dirty_cpus={} max_pages=131072 Oct 3 15:14:56.888795 (XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=00000020 Oct 3 15:14:56.900855 (XEN) p2m mappings for domain 0 (vmid 1): Oct 3 15:14:56.900855 (XEN) 1G mappings: 0 (shattered 0) Oct 3 15:14:56.900855 (XEN) 2M mappings: 227 (shattered 29) Oct 3 15:14:56.912805 (XEN) 4K mappings: 7522 Oct 3 15:14:56.912805 (XEN) Rangesets belonging to domain 0: Oct 3 15:14:56.912805 (XEN) Interrupts { 32-72, 74, 77-79, 82-84, 86, 88-100, 103-104, 107-110, 114, 116-120, 123, 126-128, 138, 144, 146-147, 149-151, 156 } Oct 3 15:14:56.925008 (XEN) I/O Memory { 2020-2050, 3810-3811, 3830-3831, 3860-3861, 10000-10001, 10010-10045, 10050-10055, 10060-10061, 101b0-101b1, 101d0-101d1, 101e0-101e1, 10440-10441, 10800-10801, 10830-10831, 10850-10851, 10a60-10a61, 10d10-10d11, 11000-11010, 11200-11201, 11210-11211, 11400-11401, 11800-11805, 11c00-11c01, 11c10-11c11, 11d40-11d41, 11f20-11f21, 12000-12010, 12100-12101, 12110-12111, 12120-12121, 12130-12131, 12170-12171, 121a0-121a1, 121b0-121b1, 121d0-121d1, 12200-12201, 12210-12211, 12220-12221, 12230-12231, 12250-12251, 122f0-122f1, 12c00-12c01, 12c10-12c11, 12c30-12c31, 12c60-12c61, 12c70-12c71, 12c80-12c81, 12c90-12c91, 12ca0-12ca1, 12cb0-12cb1, 12cc0-12cc1, 12cd0-12cd1, 12ce0-12ce1, 12d10-12d11, 12d20-12d21, 12d30-12d31, 12d40-12d41, 12d60-12d61, 12d70-12d71, 12dd0-12dd1, 13260-13261, 13270-13271, 13280-13281, 13290-13291, 132a0-132a1, 132b0-132b1, 132c0-132c1, 132d0-132d1, 132e0-132e1, 132f0-132f1, 13400-13401, 13c40-13c41, 13c50-13c51, 13e00-13e01, 13e10-13e11, 13e20-13e21, 13e30-13e31, 13e80-13e81, 13e90-13e91, 13ea0-13ea1, 13eb0-13eb1, 14400-14440, 14450-14460, 14500-14510, 14530-145a0, 145b0-145b1, 14640-14641, 14650-14651 } Oct 3 15:14:57.020882 (XEN) NODE affinity for domain 0: [0] Oct 3 15:14:57.032883 (XEN) VCPU information and callbacks for domain 0: Oct 3 15:14:57.032883 (XEN) UNIT0 affinities: hard={0-1} soft={0-1} Oct 3 15:14:57.032883 (XEN) VCPU0: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 15:14:57.044884 (XEN) pause_count=0 pause_flags=1 Oct 3 15:14:57.044884 (XEN) GICH_LRs (vcpu 0) mask=0 Oct 3 15:14:57.044884 (XEN) VCPU_LR[0]=0 Oct 3 15:14:57.056872 (XEN) VCPU_LR[1]=0 Oct 3 15:14:57.056872 (XEN) VCPU_LR[2]=0 Oct 3 15:14:57.056872 (XEN) VCPU_LR[3]=0 Oct 3 15:14:57.056872 (XEN) No periodic timer Oct 3 15:14:57.056872 (XEN) UNIT1 affinities: hard={0-1} soft={0-1} Oct 3 15:14:57.068869 (XEN) VCPU1: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 15:14:57.068869 (XEN) pause_count=0 pause_flags=1 Oct 3 15:14:57.068869 (XEN) GICH_LRs (vcpu 1) mask=0 Oct 3 15:14:57.080987 (XEN) VCPU_LR[0]=0 Oct 3 15:14:57.081047 (XEN) VCPU_LR[1]=0 Oct 3 15:14:57.081090 (XEN) VCPU_LR[2]=0 Oct 3 15:14:57.081130 (XEN) VCPU_LR[3]=0 Oct 3 15:14:57.081170 (XEN) No periodic timer Oct 3 15:14:57.092843 (XEN) Notifying guest 0:0 (virq 1, port 0) Oct 3 15:14:57.092843 (XEN) Notifying guest 0:1 (virq 1, port 0) Oct 3 15:14:57.092843 Oct 3 15:15:08.832306 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 15:15:08.853856 Oct 3 15:15:08.853925 arndale-westfield login: Oct 3 15:15:08.855968 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 15:16:00.033786 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 15:22:40.697904 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 15:29:22.045805 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 15:36:02.389778 [ 4603.947737] sd 0:0:0:0: [sda] Synchronizing SCSI cache Oct 3 15:37:04.101664 [ 4603.957097] wake enabled for irq 119 (gpx1-4) Oct 3 15:37:04.113681 [ 4603.960153] wake enabled for irq 120 (gpx1-5) Oct 3 15:37:04.113714 [ 4603.964525] wake enabled for irq 121 (gpx1-6) Oct 3 15:37:04.125682 [ 4603.968974] wake enabled for irq 122 (gpx1-7) Oct 3 15:37:04.125716 [ 4603.973392] wake enabled for irq 123 (gpx2-0) Oct 3 15:37:04.125742 [ 4603.977830] wake enabled for irq 124 (gpx2-1) Oct 3 15:37:04.137662 [ 4603.982574] reboot: Resô Oct 3 15:37:04.473653 Oct 3 15:37:04.473666 Oct 3 15:37:04.473704 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 15:37:04.473734 Oct 3 15:37:04.473755 CPU: Exynos5250@1000MHz Oct 3 15:37:04.485673 Oct 3 15:37:04.485702 Board: Arndale Oct 3 15:37:04.485725 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 15:37:04.485752 ready Oct 3 15:37:04.485774 DRAM: 2 GiB Oct 3 15:37:04.485796 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 15:37:04.509726 trace: enabled Oct 3 15:37:04.545599 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 15:37:04.905617 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 15:37:04.965688 In: serial Oct 3 15:37:04.965719 Out: serial Oct 3 15:37:04.965742 Err: serial Oct 3 15:37:04.965765 SCSI: ARNDALE SCSI INIT Oct 3 15:37:04.965788 Target spinup took 0 ms. Oct 3 15:37:04.977719 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 15:37:04.977751 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 15:37:04.977779 Net: Net Initialization Skipped Oct 3 15:37:04.989726 No ethernet found. Oct 3 15:37:04.989761 Hostname: arndale-westfield Oct 3 15:37:04.989793 Hit any key to stop autoboot: 2  1  0 Oct 3 15:37:06.917011 (Re)start USB... Oct 3 15:37:06.917089 USB0: USB EHCI 1.00 Oct 3 15:37:06.928926 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 15:37:12.521863 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 15:37:12.521968 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 15:37:12.965763 Waiting for Ethernet connection... done. Oct 3 15:37:14.669734 BOOTP broadcast 1 Oct 3 15:37:14.669785 BOOTP broadcast 2 Oct 3 15:37:17.205725 DHCP client bound to address 10.149.64.45 (2649 ms) Oct 3 15:37:17.217845 Using asx0 device Oct 3 15:37:17.217874 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 15:37:17.217874 Filename 'pxelinux.0'. Oct 3 15:37:17.217874 Load address: 0x43e00000 Oct 3 15:37:17.229694 Loading: *### Oct 3 15:37:17.241672 2.5 MiB/s Oct 3 15:37:17.241753 done Oct 3 15:37:17.241789 Bytes transferred = 42430 (a5be hex) Oct 3 15:37:17.241841 missing environment variable: pxeuuid Oct 3 15:37:17.253843 Retrieving file: pxelinux.cfg/0A95402D Oct 3 15:37:17.253873 Using asx0 device Oct 3 15:37:17.253873 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 15:37:17.253873 Filename 'pxelinux.cfg/0A95402D'. Oct 3 15:37:17.265710 Load address: 0x51000000 Oct 3 15:37:17.265773 Loading: *# Oct 3 15:37:17.265806 355.5 KiB/s Oct 3 15:37:17.265806 done Oct 3 15:37:17.265859 Bytes transferred = 728 (2d8 hex) Oct 3 15:37:17.265873 Config file found Oct 3 15:37:17.277828 Ignoring unknown command: serial Oct 3 15:37:17.277904 1: ^Overwrite Oct 3 15:37:17.277904 Retrieving file: /osstest/tmp//arndale-westfield--initrd.gz Oct 3 15:37:17.277904 Using asx0 device Oct 3 15:37:17.289698 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 15:37:17.289762 Filename '/osstest/tmp//arndale-westfield--initrd.gz'. Oct 3 15:37:17.289788 Load address: 0x43300000 Oct 3 15:37:17.301752 Loading: *################################################################# Oct 3 15:37:17.625724 ################################################################# Oct 3 15:37:17.949741 ################################################################# Oct 3 15:37:18.273714 ################################################################# Oct 3 15:37:18.585726 ################################################################# Oct 3 15:37:18.897752 ################################################################# Oct 3 15:37:19.209712 ################################################################# Oct 3 15:37:19.533706 ################################################################# Oct 3 15:37:19.869618 ################################################################# Oct 3 15:37:20.193706 ################################################################# Oct 3 15:37:20.517744 ################################################################# Oct 3 15:37:20.841750 ################################################################# Oct 3 15:37:21.165686 ################################################################# Oct 3 15:37:21.489627 ################################################################# Oct 3 15:37:21.789686 ################################################################# Oct 3 15:37:22.053629 ################################################################# Oct 3 15:37:22.317731 ################################################################# Oct 3 15:37:22.617803 ################################################################# Oct 3 15:37:22.920806 ################################################################# Oct 3 15:37:23.241714 ################################################################# Oct 3 15:37:23.553710 ################################################################# Oct 3 15:37:23.853684 ################################################################# Oct 3 15:37:24.129733 ################################################################# Oct 3 15:37:24.441722 ################################################################# Oct 3 15:37:24.730048 ################################################################# Oct 3 15:37:25.041870 ################################################################# Oct 3 15:37:25.353851 ################################################################# Oct 3 15:37:25.665624 ######################################## Oct 3 15:37:25.833716 2.8 MiB/s Oct 3 15:37:25.833753 done Oct 3 15:37:25.833784 Bytes transferred = 26339179 (191e76b hex) Oct 3 15:37:25.833831 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/linux Oct 3 15:37:25.845802 Using asx0 device Oct 3 15:37:25.845857 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 15:37:25.857672 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/linux'. Oct 3 15:37:25.857672 Load address: 0x42000000 Oct 3 15:37:25.869626 Loading: *################################################################# Oct 3 15:37:26.769677 ################################################################# Oct 3 15:37:27.093643 ################################################################# Oct 3 15:37:27.417638 ################################################################# Oct 3 15:37:27.741630 ################################################################# Oct 3 15:37:28.065652 ############################################# Oct 3 15:37:28.269648 2.1 MiB/s Oct 3 15:37:28.269686 done Oct 3 15:37:28.269708 Bytes transferred = 5427712 (52d200 hex) Oct 3 15:37:28.281735 append: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=34565 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 15:37:28.317713 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb Oct 3 15:37:28.329713 Using asx0 device Oct 3 15:37:28.329743 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 15:37:28.341711 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb'. Oct 3 15:37:28.341750 Load address: 0x43000000 Oct 3 15:37:28.341773 Loading: *#### Oct 3 15:37:28.365675 2.5 MiB/s Oct 3 15:37:28.365706 done Oct 3 15:37:28.365727 Bytes transferred = 46686 (b65e hex) Oct 3 15:37:28.365752 Kernel image @ 0x42000000 [ 0x000000 - 0x52d200 ] Oct 3 15:37:28.377699 ## Flattened Device Tree blob at 43000000 Oct 3 15:37:28.377731 Booting using the fdt blob at 0x43000000 Oct 3 15:37:28.377756 Loading Ramdisk to 4e6e1000, end 4ffff76b ... OK Oct 3 15:37:28.809673 Loading Device Tree to 4e6d2000, end 4e6e065d ... OK Oct 3 15:37:28.809708 Oct 3 15:37:28.821664 Starting kernel ...(fake run for tracing) Oct 3 15:37:28.821697 Oct 3 15:37:28.821718 Oct 3 15:37:28.821739 Starting kernel ... Oct 3 15:37:28.821761 Oct 3 15:37:28.821781 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 15:37:34.869885 [ 0.000000] Linux version 6.1.0-25-armmp (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.106-3 (2024-08-26) Oct 3 15:37:34.881911 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 15:37:34.893881 [ 0.000000] CPU: div instructions available: patching division code Oct 3 15:37:34.905871 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 15:37:34.905937 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 15:37:34.917892 [ 0.000000] Memory policy: Data cache writealloc Oct 3 15:37:34.917953 [ 0.000000] efi: UEFI not found. Oct 3 15:37:34.918000 [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 Oct 3 15:37:34.929875 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 15:37:34.929935 [ 0.000000] Zone ranges: Oct 3 15:37:34.929979 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 15:37:34.941875 [ 0.000000] Normal empty Oct 3 15:37:34.941933 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 15:37:34.953929 [ 0.000000] Movable zone start for each node Oct 3 15:37:34.953990 [ 0.000000] Early memory node ranges Oct 3 15:37:34.954036 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 15:37:34.965779 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 15:37:34.965844 [ 0.000000] percpu: Embedded 18 pages/cpu s44692 r8192 d20844 u73728 Oct 3 15:37:34.977786 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 15:37:34.977851 [ 0.000000] Kernel command line: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=34565 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 15:37:35.025807 [ 0.000000] Unknown kernel command line parameters "preseed --- vga=normal auto=true hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=34565 domain=test-lab.xenproject.org", will be passed to user space. Oct 3 15:37:35.061770 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 15:37:35.073737 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 15:37:35.085695 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 15:37:35.085760 [ 0.000000] Memory: 2015968K/2097152K available (11264K kernel code, 1696K rwdata, 3724K rodata, 2048K init, 376K bss, 64800K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 15:37:35.097736 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 15:37:35.109763 [ 0.000000] ftrace: allocating 39612 entries in 117 pages Oct 3 15:37:35.109825 [ 0.000000] ftrace: allocated 117 pages with 5 groups Oct 3 15:37:35.121785 [ 0.000000] trace event string verifier disabled Oct 3 15:37:35.121845 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 15:37:35.133838 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 15:37:35.133904 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 15:37:35.145742 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 15:37:35.145804 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 15:37:35.157752 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 15:37:35.157816 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 15:37:35.169788 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 15:37:35.169849 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 15:37:35.181801 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 15:37:35.181864 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 15:37:35.193817 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 15:37:35.193890 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 15:37:35.205835 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 15:37:35.217840 [ 0.002615] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 15:37:35.217903 [ 0.002629] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 15:37:35.229852 [ 0.002643] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 15:37:35.241837 [ 0.002655] Ignoring duplicate/late registration of read_current_timer delay Oct 3 15:37:35.241902 [ 0.003014] Console: colour dummy device 80x30 Oct 3 15:37:35.253834 [ 0.003055] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 15:37:35.253910 [ 0.003068] CPU: Testing write buffer coherency: ok Oct 3 15:37:35.265851 [ 0.003111] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 15:37:35.277807 [ 0.003119] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 15:37:35.277872 [ 0.003126] pid_max: default: 32768 minimum: 301 Oct 3 15:37:35.289774 [ 0.003488] LSM: Security Framework initializing Oct 3 15:37:35.289835 [ 0.003561] landlock: Up and running. Oct 3 15:37:35.289881 [ 0.003565] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 15:37:35.301769 [ 0.003749] AppArmor: AppArmor initialized Oct 3 15:37:35.301828 [ 0.003760] TOMOYO Linux initialized Oct 3 15:37:35.301874 [ 0.003806] LSM support for eBPF active Oct 3 15:37:35.313784 [ 0.004051] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 15:37:35.313853 [ 0.004065] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 15:37:35.325760 [ 0.005495] /cpus/cpu@0 missing clock-frequency property Oct 3 15:37:35.325820 [ 0.005523] /cpus/cpu@1 missing clock-frequency property Oct 3 15:37:35.338151 [ 0.005536] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 15:37:35.338214 [ 0.006494] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 15:37:35.349869 [ 0.006501] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 15:37:35.349932 [ 0.006604] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 15:37:35.361861 [ 0.006609] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 15:37:35.373788 [ 0.006757] Setting up static identity map for 0x40300000 - 0x403000ac Oct 3 15:37:35.373853 [ 0.007915] rcu: Hierarchical SRCU implementation. Oct 3 15:37:35.385750 [ 0.007921] rcu: Max phase no-delay instances is 1000. Oct 3 15:37:35.385812 [ 0.010047] EFI services will not be available. Oct 3 15:37:35.385860 [ 0.010391] smp: Bringing up secondary CPUs ... Oct 3 15:37:35.397745 [ 0.011141] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 15:37:35.397807 [ 0.011154] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 15:37:35.409771 [ 0.011289] smp: Brought up 1 node, 2 CPUs Oct 3 15:37:35.409830 [ 0.011298] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 15:37:35.421755 [ 0.011306] CPU: All CPU(s) started in HYP mode. Oct 3 15:37:35.421815 [ 0.011309] CPU: Virtualization extensions available. Oct 3 15:37:35.433748 [ 0.011933] devtmpfs: initialized Oct 3 15:37:35.433807 [ 0.023351] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 15:37:35.445767 [ 0.023583] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 15:37:35.445839 [ 0.023609] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 15:37:35.457796 [ 0.024143] pinctrl core: initialized pinctrl subsystem Oct 3 15:37:35.457857 [ 0.024843] DMI not present or invalid. Oct 3 15:37:35.469837 [ 0.025520] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 15:37:35.469901 [ 0.030964] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 15:37:35.481848 [ 0.032515] audit: initializing netlink subsys (disabled) Oct 3 15:37:35.481910 [ 0.032717] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 Oct 3 15:37:35.493853 [ 0.033873] thermal_sys: Registered thermal governor 'fair_share' Oct 3 15:37:35.493917 [ 0.033882] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 15:37:35.505848 [ 0.033886] thermal_sys: Registered thermal governor 'step_wise' Oct 3 15:37:35.505911 [ 0.033891] thermal_sys: Registered thermal governor 'user_space' Oct 3 15:37:35.517852 [ 0.033895] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 15:37:35.517915 [ 0.034274] No ATAGs? Oct 3 15:37:35.529831 [ 0.034343] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 15:37:35.529902 [ 0.034351] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 15:37:35.541853 [ 0.035433] Serial: AMBA PL011 UART driver Oct 3 15:37:35.541914 [ 0.084755] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 15:37:35.553851 [ 0.091797] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 15:37:35.553921 [ 0.102793] iommu: Default domain type: Translated Oct 3 15:37:35.565853 [ 0.102802] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 15:37:35.565917 [ 0.103770] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 15:37:35.577855 [ 0.104307] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 15:37:35.577938 [ 0.104319] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 15:37:35.589828 [ 0.104852] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 15:37:35.589901 [ 0.104882] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 15:37:35.601841 [ 0.105064] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 15:37:35.613749 [ 0.105413] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 15:37:35.613811 [ 0.105424] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 15:37:35.625763 [ 0.105818] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 15:37:35.625825 [ 0.106103] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 15:37:35.625873 [ 0.106113] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 15:37:35.637759 [ 0.106389] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 15:37:35.637820 [ 0.106489] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 15:37:35.649748 [ 0.106499] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 15:37:35.649811 [ 0.106698] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 15:37:35.661773 [ 0.106893] pps_core: LinuxPPS API ver. 1 registered Oct 3 15:37:35.661835 [ 0.106898] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 15:37:35.673761 [ 0.106914] PTP clock support registered Oct 3 15:37:35.673819 [ 0.108551] NetLabel: Initializing Oct 3 15:37:35.673865 [ 0.108558] NetLabel: domain hash size = 128 Oct 3 15:37:35.685751 [ 0.108563] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 15:37:35.685814 [ 0.108617] NetLabel: unlabeled traffic allowed by default Oct 3 15:37:35.697770 [ 0.108799] vgaarb: loaded Oct 3 15:37:35.697827 [ 0.109476] clocksource: Switched to clocksource mct-frc Oct 3 15:37:35.697876 [ 0.110102] VFS: Disk quotas dquot_6.6.0 Oct 3 15:37:35.709750 [ 0.110188] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 15:37:35.709815 [ 0.110928] AppArmor: AppArmor Filesystem Enabled Oct 3 15:37:35.721753 [ 0.120965] NET: Registered PF_INET protocol family Oct 3 15:37:35.721815 [ 0.121193] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 15:37:35.733753 [ 0.122802] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 15:37:35.733822 [ 0.122901] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 15:37:35.745761 [ 0.122925] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 15:37:35.757886 [ 0.123024] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 15:37:35.757953 [ 0.123256] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 15:37:35.769841 [ 0.123490] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 15:37:35.769911 [ 0.123588] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 15:37:35.781828 [ 0.123628] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 15:37:35.793749 [ 0.123826] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 15:37:35.793813 [ 0.123861] NET: Registered PF_XDP protocol family Oct 3 15:37:35.793861 [ 0.123876] PCI: CLS 0 bytes, default 64 Oct 3 15:37:35.805757 [ 0.124980] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 15:37:35.805826 [ 0.125230] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 15:37:35.817770 [ 0.129841] Trying to unpack rootfs image as initramfs... Oct 3 15:37:35.829757 [ 0.182876] Initialise system trusted keyrings Oct 3 15:37:35.829818 [ 0.182969] Key type blacklist registered Oct 3 15:37:35.829864 [ 0.183378] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 15:37:35.841701 [ 0.190736] zbud: loaded Oct 3 15:37:35.841757 [ 0.191761] integrity: Platform Keyring initialized Oct 3 15:37:35.841824 [ 0.191789] integrity: Machine keyring initialized Oct 3 15:37:35.853769 [ 0.191797] Key type asymmetric registered Oct 3 15:37:35.853828 [ 0.191804] Asymmetric key parser 'x509' registered Oct 3 15:37:35.865741 [ 1.499136] Freeing initrd memory: 25724K Oct 3 15:37:35.865801 [ 1.510455] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 15:37:35.865852 [ 1.510739] bounce: pool size: 64 pages Oct 3 15:37:35.877765 [ 1.510902] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 15:37:35.877835 [ 1.511067] io scheduler mq-deadline registered Oct 3 15:37:35.889747 [ 1.516224] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 15:37:35.889819 [ 1.536998] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 15:37:35.901767 [ 1.537011] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 15:37:35.913793 [ 1.539318] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 15:37:35.913861 [ 1.539328] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 15:37:35.925789 [ 1.540188] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 15:37:35.937756 [ 1.540197] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 15:37:35.949764 [ 1.540982] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 15:37:35.949834 [ 1.540991] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 15:37:35.961765 [ 1.543391] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 15:37:35.973767 [ 1.546224] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 15:37:35.973831 [ 1.548948] Serial: AMBA driver Oct 3 15:37:35.973876 [ 1.549190] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 15:37:35.985769 [ 1.549752] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 15:37:35.997769 [ 1.550211] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 15:37:36.009772 [ 2.688311] printk: console [ttySAC2] enabled Oct 3 15:37:36.009832 [ 2.693121] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 15:37:36.021735 [ 2.703780] STM32 USART driver initialized Oct 3 15:37:36.021794 [ 2.717880] mousedev: PS/2 mouse device common for all mice Oct 3 15:37:36.045683 [ 2.749195] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 15:37:36.069732 [ 2.757832] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T15:37:37 UTC (1727969857) Oct 3 15:37:36.081765 [ 2.767680] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 15:37:36.093748 [ 2.775122] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 15:37:36.093811 [ 2.783104] NET: Registered PF_INET6 protocol family Oct 3 15:37:36.105715 [ 2.796740] Segment Routing with IPv6 Oct 3 15:37:36.117741 [ 2.799021] In-situ OAM (IOAM) with IPv6 Oct 3 15:37:36.117800 [ 2.802979] mip6: Mobile IPv6 Oct 3 15:37:36.129713 [ 2.805816] NET: Registered PF_PACKET protocol family Oct 3 15:37:36.129778 [ 2.810966] mpls_gso: MPLS GSO support Oct 3 15:37:36.129825 [ 2.815208] ThumbEE CPU extension supported. Oct 3 15:37:36.141777 [ 2.818894] Registering SWP/SWPB emulation handler Oct 3 15:37:36.141839 [ 2.824059] registered taskstats version 1 Oct 3 15:37:36.141885 [ 2.827709] Loading compiled-in X.509 certificates Oct 3 15:37:36.153702 [ 3.288137] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 15:37:36.609741 [ 3.295498] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 15:37:36.621792 [ 3.306536] zswap: loaded using pool lzo/zbud Oct 3 15:37:36.633737 [ 3.310490] Key type .fscrypt registered Oct 3 15:37:36.633797 [ 3.313814] Key type fscrypt-provisioning registered Oct 3 15:37:36.633845 [ 3.327499] Key type encrypted registered Oct 3 15:37:36.645667 [ 3.330098] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 15:37:36.657756 [ 3.335601] ima: No TPM chip found, activating TPM-bypass! Oct 3 15:37:36.657818 [ 3.341018] ima: Allocated hash algorithm: sha256 Oct 3 15:37:36.657866 [ 3.345812] ima: No architecture policies found Oct 3 15:37:36.669775 [ 3.350246] evm: Initialising EVM extended attributes: Oct 3 15:37:36.669837 [ 3.355322] evm: security.selinux Oct 3 15:37:36.681658 [ 3.358615] evm: security.SMACK64 (disabled) Oct 3 15:37:36.681691 [ 3.362864] evm: security.SMACK64EXEC (disabled) Oct 3 15:37:36.681716 [ 3.367466] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 15:37:36.693697 [ 3.372501] evm: security.SMACK64MMAP (disabled) Oct 3 15:37:36.693730 [ 3.377102] evm: security.apparmor Oct 3 15:37:36.693755 [ 3.380485] evm: security.ima Oct 3 15:37:36.705736 [ 3.383433] evm: security.capability Oct 3 15:37:36.705794 [ 3.386995] evm: HMAC attrs: 0x1 Oct 3 15:37:36.705839 [ 3.974706] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 15:37:37.293753 [ 3.980675] clk: Disabling unused clocks Oct 3 15:37:37.305710 [ 3.994422] Freeing unused kernel image (initmem) memory: 2048K Oct 3 15:37:37.317779 [ 3.999291] Checked W+X mappings: passed, no W+X pages found Oct 3 15:37:37.317860 [ 4.004545] Run /init as init process Oct 3 15:37:37.329691 [ 4.568578] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 15:37:37.896947 [ 4.618042] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 15:37:37.944975 [ 4.626089] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 15:37:37.956827 [ 4.637858] usbcore: registered new interface driver usbfs Oct 3 15:37:37.956889 [ 4.642869] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 15:37:37.968991 [ 4.651549] usbcore: registered new interface driver hub Oct 3 15:37:37.980824 [ 4.657537] usbcore: registered new device driver usb Oct 3 15:37:37.980886 [ 4.667056] phy phy-12130000.phy.1: phy_power_on was called before phy_init Oct 3 15:37:37.992986 [ 4.672620] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 15:37:38.004967 [ 4.678058] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Oct 3 15:37:38.005039 [ 4.686633] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Oct 3 15:37:38.016816 [ 4.705312] phy phy-12130000.phy.1: phy_power_on was called before phy_init Oct 3 15:37:38.028949 [ 4.716971] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 15:37:38.040836 [ 4.730218] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 15:37:38.052791 [ 4.737061] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 15:37:38.064866 [ 4.744242] usb usb1: Product: EHCI Host Controller Oct 3 15:37:38.064927 [ 4.749098] usb usb1: Manufacturer: Linux 6.1.0-25-armmp ehci_hcd Oct 3 15:37:38.076834 [ 4.755190] usb usb1: SerialNumber: 12110000.usb Oct 3 15:37:38.076895 [ 4.767545] exynos-ohci 12120000.usb: USB Host Controller Oct 3 15:37:38.088864 [ 4.778154] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 15:37:38.100901 [ 4.789946] hub 1-0:1.0: USB hub found Oct 3 15:37:38.112746 [ 4.806847] hub 1-0:1.0: 3 ports detected Oct 3 15:37:38.124845 [ 4.858240] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Oct 3 15:37:38.184865 [ 4.865549] usb3503 usb-hub: switched to HUB mode Oct 3 15:37:38.184925 [ 4.869138] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 15:37:38.196872 [ 4.877925] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Oct 3 15:37:38.208819 [ 4.946789] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 15:37:38.265851 [ 4.953642] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 15:37:38.277817 [ 4.960817] usb usb2: Product: USB Host Controller Oct 3 15:37:38.277904 [ 4.965588] usb usb2: Manufacturer: Linux 6.1.0-25-armmp ohci_hcd Oct 3 15:37:38.289798 [ 4.971663] usb usb2: SerialNumber: 12120000.usb Oct 3 15:37:38.289852 [ 4.980017] hub 2-0:1.0: USB hub found Oct 3 15:37:38.301774 [ 4.982611] hub 2-0:1.0: 3 ports detected Oct 3 15:37:38.301803 [ 5.179370] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 15:37:38.505754 [ 5.183443] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 15:37:38.505826 [ 5.191081] usb 1-3: new high-speed USB device number 2 using exynos-ehci Oct 3 15:37:38.517662 [ 5.198333] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 15:37:38.529755 [ 5.209639] xhci-hcd xhci-hcd.2.auto: irq 108, io mem 0x12000000 Oct 3 15:37:38.529819 [ 5.214443] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 15:37:38.541771 [ 5.219711] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 15:37:38.541841 [ 5.227344] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 15:37:38.553765 [ 5.233990] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 15:37:38.565768 [ 5.242088] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 15:37:38.565838 [ 5.249285] usb usb3: Product: xHCI Host Controller Oct 3 15:37:38.577777 [ 5.254147] usb usb3: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 15:37:38.577842 [ 5.260220] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 15:37:38.577890 [ 5.265813] hub 3-0:1.0: USB hub found Oct 3 15:37:38.589767 [ 5.268827] hub 3-0:1.0: 1 port detected Oct 3 15:37:38.589825 [ 5.273265] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 15:37:38.601775 [ 5.280931] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 15:37:38.601844 [ 5.289042] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 15:37:38.613771 [ 5.296250] usb usb4: Product: xHCI Host Controller Oct 3 15:37:38.613831 [ 5.301107] usb usb4: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 15:37:38.625758 [ 5.307187] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 15:37:38.625819 [ 5.312711] hub 4-0:1.0: USB hub found Oct 3 15:37:38.637728 [ 5.315806] hub 4-0:1.0: 1 port detected Oct 3 15:37:38.637787 [ 5.357960] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Oct 3 15:37:38.685749 [ 5.364709] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 3 15:37:38.685815 [ 5.373275] hub 1-3:1.0: USB hub found Oct 3 15:37:38.697716 [ 5.375714] hub 1-3:1.0: 3 ports detected Oct 3 15:37:38.697776 Starting system log daemon: syslogd, klogd. Oct 3 15:37:38.841693 /var/run/utmp: No such file or directory Oct 3 15:37:40.677961 [?1h=(B   Oct 3 15:37:40.713773  Oct 3 15:37:40.725759 [  (-*) ][ Oct 03 15:37 ] Oct 3 15:37:40.737763 [  (0*start) ][ Oct 03 15:37 ] Oct 3 15:37:40.749758 [  (0*start) ][ Oct 03 15:37 ] Oct 3 15:37:40.761820 [  (0*start) ][ Oct 03 15:37 ] Oct 3 15:37:40.773768 [  (0*start) ][ Oct 03 15:37 ]                        [  (0*start) ][ Oct 03 15:37 ][  (0*start) ][ Oct 03 15:37 ] Oct 3 15:37:40.833759 [ 0- start  (2*shell) ][ Oct 03 15:37 ] Oct 3 15:37:40.845779 [ 0- start  (2*shell) ][ Oct 03 15:37 ] Oct 3 15:37:40.857780 [ 0- start  (2*shell) ][ Oct 03 15:37 ] Oct 3 15:37:40.869766 [ 0- start  (2*shell) ][ Oct 03 15:37 ]                        [ 0- start  (2*shell) ][ Oct 03 15:37 ][ 0- start  (2*shell) ][ Oct 03 15:37 ] Oct 3 15:37:40.929779 [ 0 start 2- shell  (3*shell) ][ Oct 03 15:37 ] Oct 3 15:37:40.941774 [ 0 start 2- shell  (3*shell) ][ Oct 03 15:37 ] Oct 3 15:37:40.953754 [ 0 start 2- shell  (3*shell) ][ Oct 03 15:37 ] Oct 3 15:37:40.977761 [ 0 start 2- shell  (3*shell) ][ Oct 03 15:37 ]                        [ 0 start 2- shell  (3*shell) ][ Oct 03 15:37 ][ 0 start 2- shell  (3*shell) ][ Oct 03 15:37 ] Oct 3 15:37:41.025773 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 15:37 ] Oct 3 15:37:41.037785 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 15:37 ] Oct 3 15:37:41.061736 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 15:37 ] Oct 3 15:37:41.073767 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 15:37 ]                        [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 15:37 ][ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 15:37 ] Oct 3 15:37:41.121810 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 15:37 ] Oct 3 15:37:41.145771 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 15:37 ] Oct 3 15:37:41.157754 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 15:37 ] Oct 3 15:37:41.169755 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 15:37 ]                        [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 15:37 ][ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 15:37 ] Oct 3 15:37:41.229754 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 15:37 ] Oct 3 15:37:41.241756 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 15:37 ] Oct 3 15:37:41.253703 [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 15:37 ] Oct 3 15:37:41.704945 Detecting network hardware ... 2%... 95%... 100% Oct 3 15:37:43.448845 Detecting link on eth0; please wait... ... 0%... 10%... 20% Oct 3 15:37:48.333702 Waiting for link-local address... ... 8%... 16%... 25%... 33%... 41%... 50%... 100% Oct 3 15:37:50.129617 Attempting IPv6 autoconfiguration... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 75%... 83%... 91%... 100% Oct 3 15:37:56.201694 Configuring the network with DHCP ... 0%... 100%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 15:38 ] Oct 3 15:37:59.361716 Checking the Debian archive mirror ... 25%... 50%... 75%... 100% Oct 3 15:38:07.293718 Loading additional components ... 0%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Oct 3 15:38:40.225743 Setting up the clock ... 0%... 100% Oct 3 15:38:42.973671 Loading additional components ... 50%... 100% Oct 3 15:38:44.629703 Detecting disks and all other hardware ... 2%... 95%... 100% Oct 3 15:38:49.237759 Loading additional components ... 12%... 25%... 37%... 50%... 62%... 75%... 87%... 100% Oct 3 15:38:56.245603 Loading additional components ... 25%... 50%... 75%... 100% Oct 3 15:38:58.609702 Starting up the partitioner [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 15:39 ]... 4%... 13%... 21%... 30%... 43%... 52%... 60%... 73%... 82%... 91%... 100% Oct 3 15:39:11.705710 Guided partitioning ... 16%... 33%... 50%... 66%... 83%... 100% Oct 3 15:39:19.909818 Starting up the partitioner ... 4%... 12%... 20%... 32%... 40%... 52%... 60%... 72%... 80%... 92%... 100% Oct 3 15:39:30.817708 Partitions formatting ... 33% Oct 3 15:39:39.601803 Partitions formatting Partitions formatting Installing the base system ... 0%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 15:40 ]... 17%... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 15:41 ]... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 15:42 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 15:43 ]... 48%... 50%...  Oct 3 15:43:34.333737  60%... 70%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 15:44 ]... 79%... 83%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 15:45 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 15:46 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 15:47 ]... 91%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 15:48 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 15:49 ]... 100% Oct 3 15:49:15.021746 Configuring apt ... 7%... 14%... 14%... 21%... 35%... 42%... 50%... 61%... 71%. Oct 3 15:49:52.121826 ... 82%... 92%... 100% Oct 3 15:49:54.705861 Select and install software ... 1%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 15:50 ]... 10%... 13%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 15:51 ]... 20%... 30%... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 15:52 ]... 50%... Oct 3 15:52:43.477728 . 60%... 70%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 15:53 ]... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 15:54 ]... 88%... 90%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 15:55 ]... 94%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 15:56 ]... 100% Oct 3 15:56:01.185763 Finishing the installation ... 4%... 12%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 15:57 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 15:58 ]... 16%... 20%... 32%... 40%... 44%... Oct 3 15:58:12.821607  52%... 60%... 72%... 80%... 92% The system is going down NOW! Sent SIGKILL to all processes Oct 3 15:58:23.689121 Requesting system reboot Oct 3 15:58:23.701077 [ 1251.409899] reboot: Re˙ Oct 3 15:58:25.052894 Oct 3 15:58:25.052894 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 15:58:25.064897 Oct 3 15:58:25.064897 CPU: Exynos5250@1000MHz Oct 3 15:58:25.064897 Oct 3 15:58:25.064897 Board: Arndale Oct 3 15:58:25.064897 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 15:58:25.064897 ready Oct 3 15:58:25.064897 DRAM: 2 GiB Oct 3 15:58:25.076871 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 15:58:25.088914 trace: enabled Oct 3 15:58:25.125046 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 15:58:25.484901 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 15:58:25.544939 In: serial Oct 3 15:58:25.544939 Out: serial Oct 3 15:58:25.544939 Err: serial Oct 3 15:58:25.544939 SCSI: ARNDALE SCSI INIT Oct 3 15:58:25.556928 Target spinup took 0 ms. Oct 3 15:58:25.556928 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 15:58:25.556928 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 15:58:25.568947 Net: Net Initialization Skipped Oct 3 15:58:25.568947 No ethernet found. Oct 3 15:58:25.568947 Hostname: arndale-westfield Oct 3 15:58:25.568947 Hit any key to stop autoboot: 2  1  0 Oct 3 15:58:27.500913 (Re)start USB... Oct 3 15:58:27.500913 USB0: USB EHCI 1.00 Oct 3 15:58:27.500913 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 15:58:33.093711 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 15:58:33.105744 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 15:58:33.549684 Waiting for Ethernet connection... done. Oct 3 15:58:35.193751 BOOTP broadcast 1 Oct 3 15:58:35.193818 BOOTP broadcast 2 Oct 3 15:58:36.629052 DHCP client bound to address 10.149.64.45 (1494 ms) Oct 3 15:58:36.641076 Using asx0 device Oct 3 15:58:36.641131 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 15:58:36.641185 Filename 'pxelinux.0'. Oct 3 15:58:36.641309 Load address: 0x43e00000 Oct 3 15:58:36.653014 Loading: *### Oct 3 15:58:36.665020 2.2 MiB/s Oct 3 15:58:36.665075 done Oct 3 15:58:36.665116 Bytes transferred = 42430 (a5be hex) Oct 3 15:58:36.665160 missing environment variable: pxeuuid Oct 3 15:58:36.677075 Retrieving file: pxelinux.cfg/0A95402D Oct 3 15:58:36.677142 Using asx0 device Oct 3 15:58:36.677186 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 15:58:36.689074 Filename 'pxelinux.cfg/0A95402D'. Oct 3 15:58:36.689134 Load address: 0x51000000 Oct 3 15:58:36.689178 Loading: *# Oct 3 15:58:36.689219 31.3 KiB/s Oct 3 15:58:36.689300 done Oct 3 15:58:36.689340 Bytes transferred = 65 (41 hex) Oct 3 15:58:36.700991 Config file found Oct 3 15:58:36.701048 Ignoring unknown command: serial Oct 3 15:58:36.701094 1: local Oct 3 15:58:36.701134 scanning bus for devices... Oct 3 15:58:36.701176 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 15:58:36.717035 Type: Hard Disk Oct 3 15:58:36.717092 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 15:58:36.729087 Found 1 device(s). Oct 3 15:58:36.729143 Oct 3 15:58:36.729183 SCSI device 0: Oct 3 15:58:36.729283 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 15:58:36.741023 Type: Hard Disk Oct 3 15:58:36.741081 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 15:58:36.741132 ... is now current device Oct 3 15:58:36.752989 Scanning scsi 0... Oct 3 15:58:36.753045 Found U-Boot script /boot.scr Oct 3 15:58:36.860975 639 bytes read in 40 ms (14.6 KiB/s) Oct 3 15:58:36.913018 ## Executing script at 50000000 Oct 3 15:58:36.913076 Loading dtbs/exynos5250-arndale.dtb Oct 3 15:58:36.913122 46686 bytes read in 328 ms (138.7 KiB/s) Oct 3 15:58:37.249087 Loading vmlinuz-6.1.0-25-armmp-lpae Oct 3 15:58:37.260988 5509632 bytes read in 186 ms (28.2 MiB/s) Oct 3 15:58:37.453029 Loading initrd.img-6.1.0-25-armmp-lpae Oct 3 15:58:37.453089 25732168 bytes read in 1886 ms (13 MiB/s) Oct 3 15:58:39.288952 Booting Oct 3 15:58:39.288952 Kernel image @ 0x42000000 [ 0x000000 - 0x541200 ] Oct 3 15:58:39.288952 ## Flattened Device Tree blob at 43000000 Oct 3 15:58:39.288952 Booting using the fdt blob at 0x43000000 Oct 3 15:58:39.300870 Loading Ramdisk to 4e775000, end 4ffff448 ... OK Oct 3 15:58:39.712882 Loading Device Tree to 4e766000, end 4e77465d ... OK Oct 3 15:58:39.712882 Oct 3 15:58:39.724871 Starting kernel ...(fake run for tracing) Oct 3 15:58:39.724871 Oct 3 15:58:39.724871 Oct 3 15:58:39.724871 Starting kernel ... Oct 3 15:58:39.736842 Oct 3 15:58:39.736842 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 15:58:45.884905 [ 0.000000] Linux version 6.1.0-25-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.106-3 (2024-08-26) Oct 3 15:58:45.908588 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=30c5387d Oct 3 15:58:45.908701 [ 0.000000] CPU: div instructions available: patching division code Oct 3 15:58:45.920918 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 15:58:45.920918 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 15:58:45.932935 [ 0.000000] Memory policy: Data cache writealloc Oct 3 15:58:45.932935 [ 0.000000] efi: UEFI not found. Oct 3 15:58:45.944944 [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000 Oct 3 15:58:45.944944 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 15:58:45.944944 [ 0.000000] Zone ranges: Oct 3 15:58:45.957016 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 15:58:45.957016 [ 0.000000] Normal empty Oct 3 15:58:45.957016 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 15:58:45.968916 [ 0.000000] Movable zone start for each node Oct 3 15:58:45.968954 [ 0.000000] Early memory node ranges Oct 3 15:58:45.977753 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 15:58:45.977822 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 15:58:45.989821 [ 0.000000] percpu: Embedded 18 pages/cpu s44820 r8192 d20716 u73728 Oct 3 15:58:45.989885 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 15:58:46.009084 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=ttySAC2,115200n8 Oct 3 15:58:46.009166 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 15:58:46.020997 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 15:58:46.033021 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 15:58:46.033085 [ 0.000000] Memory: 2015504K/2097152K available (12288K kernel code, 1717K rwdata, 3748K rodata, 2048K init, 383K bss, 65264K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 15:58:46.045020 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 15:58:46.056938 [ 0.000000] ftrace: allocating 39996 entries in 118 pages Oct 3 15:58:46.056938 [ 0.000000] ftrace: allocated 118 pages with 5 groups Oct 3 15:58:46.068943 [ 0.000000] trace event string verifier disabled Oct 3 15:58:46.068943 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 15:58:46.077764 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 15:58:46.077830 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 15:58:46.092417 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 15:58:46.092417 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 15:58:46.103318 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 15:58:46.103470 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 15:58:46.114076 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 15:58:46.114076 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 15:58:46.129028 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 15:58:46.129098 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 15:58:46.141040 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 15:58:46.141109 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 15:58:46.153085 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 15:58:46.162843 [ 0.002616] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 15:58:46.162906 [ 0.002630] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 15:58:46.177041 [ 0.002645] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 15:58:46.189360 [ 0.002657] Ignoring duplicate/late registration of read_current_timer delay Oct 3 15:58:46.189425 [ 0.003023] Console: colour dummy device 80x30 Oct 3 15:58:46.201076 [ 0.003065] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 15:58:46.214034 [ 0.003079] CPU: Testing write buffer coherency: ok Oct 3 15:58:46.214094 [ 0.003122] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 15:58:46.225087 [ 0.003130] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 15:58:46.225152 [ 0.003136] pid_max: default: 32768 minimum: 301 Oct 3 15:58:46.237082 [ 0.003504] LSM: Security Framework initializing Oct 3 15:58:46.237137 [ 0.003576] landlock: Up and running. Oct 3 15:58:46.237183 [ 0.003581] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 15:58:46.249119 [ 0.003769] AppArmor: AppArmor initialized Oct 3 15:58:46.249151 [ 0.003782] TOMOYO Linux initialized Oct 3 15:58:46.249176 [ 0.003826] LSM support for eBPF active Oct 3 15:58:46.261059 [ 0.004073] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 15:58:46.261129 [ 0.004087] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 15:58:46.273059 [ 0.005495] /cpus/cpu@0 missing clock-frequency property Oct 3 15:58:46.273120 [ 0.005524] /cpus/cpu@1 missing clock-frequency property Oct 3 15:58:46.285072 [ 0.005537] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 15:58:46.285136 [ 0.006488] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 15:58:46.297076 [ 0.006495] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 15:58:46.309077 [ 0.006597] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 15:58:46.309149 [ 0.006603] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 15:58:46.321082 [ 0.006742] Setting up static identity map for 0x40400000 - 0x404000ac Oct 3 15:58:46.321147 [ 0.007900] rcu: Hierarchical SRCU implementation. Oct 3 15:58:46.333116 [ 0.007906] rcu: Max phase no-delay instances is 1000. Oct 3 15:58:46.333180 [ 0.010047] EFI services will not be available. Oct 3 15:58:46.333265 [ 0.010394] smp: Bringing up secondary CPUs ... Oct 3 15:58:46.345133 [ 0.011138] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 15:58:46.345197 [ 0.011150] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 15:58:46.357133 [ 0.011279] smp: Brought up 1 node, 2 CPUs Oct 3 15:58:46.357192 [ 0.011288] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 15:58:46.369138 [ 0.011295] CPU: All CPU(s) started in HYP mode. Oct 3 15:58:46.369200 [ 0.011299] CPU: Virtualization extensions available. Oct 3 15:58:46.381129 [ 0.012155] devtmpfs: initialized Oct 3 15:58:46.381188 [ 0.023136] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 15:58:46.393119 [ 0.023368] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 15:58:46.393212 [ 0.023393] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 15:58:46.405140 [ 0.023924] pinctrl core: initialized pinctrl subsystem Oct 3 15:58:46.405201 [ 0.024669] DMI not present or invalid. Oct 3 15:58:46.417078 [ 0.025343] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 15:58:46.417143 [ 0.026893] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 15:58:46.429133 [ 0.028416] audit: initializing netlink subsys (disabled) Oct 3 15:58:46.429196 [ 0.028618] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 Oct 3 15:58:46.441091 [ 0.029799] thermal_sys: Registered thermal governor 'fair_share' Oct 3 15:58:46.441154 [ 0.029806] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 15:58:46.453073 [ 0.029810] thermal_sys: Registered thermal governor 'step_wise' Oct 3 15:58:46.453137 [ 0.029814] thermal_sys: Registered thermal governor 'user_space' Oct 3 15:58:46.469021 [ 0.029819] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 15:58:46.469057 [ 0.030017] No ATAGs? Oct 3 15:58:46.469081 [ 0.030084] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 15:58:46.481019 [ 0.030093] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 15:58:46.481082 [ 0.031180] Serial: AMBA PL011 UART driver Oct 3 15:58:46.493069 [ 0.080549] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 15:58:46.493138 [ 0.087486] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 15:58:46.505057 [ 0.091744] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages Oct 3 15:58:46.517084 [ 0.091752] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page Oct 3 15:58:46.517150 [ 0.099409] iommu: Default domain type: Translated Oct 3 15:58:46.529066 [ 0.099417] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 15:58:46.529131 [ 0.100395] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 15:58:46.541103 [ 0.100907] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 15:58:46.541166 [ 0.100918] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 15:58:46.553082 [ 0.101421] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 15:58:46.553186 [ 0.101451] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 15:58:46.565111 [ 0.101654] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 15:58:46.565172 [ 0.102016] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 15:58:46.577064 [ 0.102027] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 15:58:46.577098 [ 0.102415] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 15:58:46.589133 [ 0.102705] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 15:58:46.589195 [ 0.102715] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 15:58:46.601086 [ 0.103008] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 15:58:46.601149 [ 0.103109] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 15:58:46.613118 [ 0.103117] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 15:58:46.613182 [ 0.103328] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 15:58:46.613277 [ 0.103542] pps_core: LinuxPPS API ver. 1 registered Oct 3 15:58:46.625210 [ 0.103548] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 15:58:46.637129 [ 0.103564] PTP clock support registered Oct 3 15:58:46.637189 [ 0.105004] NetLabel: Initializing Oct 3 15:58:46.637274 [ 0.105010] NetLabel: domain hash size = 128 Oct 3 15:58:46.649133 [ 0.105015] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 15:58:46.649197 [ 0.105069] NetLabel: unlabeled traffic allowed by default Oct 3 15:58:46.661148 [ 0.105240] vgaarb: loaded Oct 3 15:58:46.661264 [ 0.106299] clocksource: Switched to clocksource mct-frc Oct 3 15:58:46.661322 [ 0.106899] VFS: Disk quotas dquot_6.6.0 Oct 3 15:58:46.673157 [ 0.106982] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 15:58:46.673256 [ 0.107783] AppArmor: AppArmor Filesystem Enabled Oct 3 15:58:46.673311 [ 0.117742] NET: Registered PF_INET protocol family Oct 3 15:58:46.685138 [ 0.117936] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 15:58:46.685208 [ 0.119406] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 15:58:46.697063 [ 0.119508] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 15:58:46.709140 [ 0.119532] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 15:58:46.709208 [ 0.119631] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 15:58:46.721122 [ 0.119862] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 15:58:46.733118 [ 0.120091] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 15:58:46.733188 [ 0.120187] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 15:58:46.745079 [ 0.120227] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 15:58:46.745145 [ 0.120434] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 15:58:46.757117 [ 0.120472] NET: Registered PF_XDP protocol family Oct 3 15:58:46.757178 [ 0.120484] PCI: CLS 0 bytes, default 64 Oct 3 15:58:46.769187 [ 0.121002] Trying to unpack rootfs image as initramfs... Oct 3 15:58:46.769288 [ 0.121363] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 15:58:46.781182 [ 0.126769] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 15:58:46.781290 [ 0.194485] Initialise system trusted keyrings Oct 3 15:58:46.793128 [ 0.194556] Key type blacklist registered Oct 3 15:58:46.793188 [ 0.195749] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 15:58:46.809106 [ 0.203723] zbud: loaded Oct 3 15:58:46.809137 [ 0.204897] integrity: Platform Keyring initialized Oct 3 15:58:46.809164 [ 0.204929] integrity: Machine keyring initialized Oct 3 15:58:46.809190 [ 0.204937] Key type asymmetric registered Oct 3 15:58:46.821084 [ 0.204945] Asymmetric key parser 'x509' registered Oct 3 15:58:46.821147 [ 1.425181] Freeing initrd memory: 25132K Oct 3 15:58:46.821195 [ 1.447470] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 15:58:46.833277 [ 1.447735] bounce: pool size: 64 pages Oct 3 15:58:46.833277 [ 1.447927] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 15:58:46.845173 [ 1.448093] io scheduler mq-deadline registered Oct 3 15:58:46.845173 [ 1.453230] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 15:58:46.857147 [ 1.474192] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 15:58:46.857147 [ 1.474204] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 15:58:46.869213 [ 1.476534] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 15:58:46.881140 [ 1.476544] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 15:58:46.893380 [ 1.477351] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 15:58:46.893449 [ 1.477360] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 15:58:46.905148 [ 1.478171] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 15:58:46.917050 [ 1.478180] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 15:58:46.917121 [ 1.480552] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 15:58:46.929162 [ 1.483392] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 15:58:46.941164 [ 1.486116] Serial: AMBA driver Oct 3 15:58:46.941221 [ 1.486377] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 15:58:46.953121 [ 1.486847] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 15:58:46.953193 [ 1.487312] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 15:58:46.965161 [ 2.568040] printk: console [ttySAC2] enabled Oct 3 15:58:46.977201 [ 2.572873] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 15:58:46.977314 [ 2.583526] STM32 USART driver initialized Oct 3 15:58:46.989089 [ 2.597923] mousedev: PS/2 mouse device common for all mice Oct 3 15:58:47.001179 [ 2.629273] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 15:58:47.037035 [ 2.637899] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T15:58:47 UTC (1727971127) Oct 3 15:58:47.048923 [ 2.647747] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 15:58:47.048923 [ 2.655251] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 15:58:47.060914 [ 2.663238] NET: Registered PF_INET6 protocol family Oct 3 15:58:47.060914 [ 2.687289] Segment Routing with IPv6 Oct 3 15:58:47.084880 [ 2.689526] In-situ OAM (IOAM) with IPv6 Oct 3 15:58:47.096928 [ 2.693518] mip6: Mobile IPv6 Oct 3 15:58:47.096928 [ 2.696371] NET: Registered PF_PACKET protocol family Oct 3 15:58:47.096928 [ 2.701538] mpls_gso: MPLS GSO support Oct 3 15:58:47.108951 [ 2.705555] ThumbEE CPU extension supported. Oct 3 15:58:47.108951 [ 2.709408] Registering SWP/SWPB emulation handler Oct 3 15:58:47.108951 [ 2.714657] registered taskstats version 1 Oct 3 15:58:47.120878 [ 2.718234] Loading compiled-in X.509 certificates Oct 3 15:58:47.120878 [ 3.178165] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 15:58:47.580937 [ 3.185516] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 15:58:47.592921 [ 3.196608] zswap: loaded using pool lzo/zbud Oct 3 15:58:47.592921 [ 3.200469] Key type .fscrypt registered Oct 3 15:58:47.604912 [ 3.203842] Key type fscrypt-provisioning registered Oct 3 15:58:47.604912 [ 3.228117] Key type encrypted registered Oct 3 15:58:47.628923 [ 3.230716] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 15:58:47.628923 [ 3.236204] ima: No TPM chip found, activating TPM-bypass! Oct 3 15:58:47.640933 [ 3.241646] ima: Allocated hash algorithm: sha256 Oct 3 15:58:47.640933 [ 3.246352] ima: No architecture policies found Oct 3 15:58:47.652936 [ 3.250894] evm: Initialising EVM extended attributes: Oct 3 15:58:47.652936 [ 3.255929] evm: security.selinux Oct 3 15:58:47.652936 [ 3.259227] evm: security.SMACK64 (disabled) Oct 3 15:58:47.664932 [ 3.263478] evm: security.SMACK64EXEC (disabled) Oct 3 15:58:47.664932 [ 3.268079] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 15:58:47.676940 [ 3.273113] evm: security.SMACK64MMAP (disabled) Oct 3 15:58:47.676940 [ 3.277713] evm: security.apparmor Oct 3 15:58:47.676940 [ 3.281098] evm: security.ima Oct 3 15:58:47.676940 [ 3.284050] evm: security.capability Oct 3 15:58:47.688881 [ 3.287615] evm: HMAC attrs: 0x1 Oct 3 15:58:47.688881 [ 3.875265] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 15:58:48.276604 [ 3.881210] clk: Disabling unused clocks Oct 3 15:58:48.289125 [ 3.894090] Freeing unused kernel image (initmem) memory: 2048K Oct 3 15:58:48.301122 [ 3.898973] Checked W+X mappings: passed, no W+X pages found Oct 3 15:58:48.301236 [ 3.904215] Run /init as init process Oct 3 15:58:48.301276 Loading, please wait... Oct 3 15:58:48.337015 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 15:58:48.409298 [ 4.825957] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 15:58:49.229080 [ 4.847282] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 15:58:49.253081 [ 4.858958] usbcore: registered new interface driver usbfs Oct 3 15:58:49.265059 [ 4.860963] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 15:58:49.265131 [ 4.885521] usbcore: registered new interface driver hub Oct 3 15:58:49.289076 [ 4.898885] Synopsys Designware Multimedia Card Interface Driver Oct 3 15:58:49.301113 [ 4.902048] usbcore: registered new device driver usb Oct 3 15:58:49.312952 [ 4.916031] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 15:58:49.325032 [ 4.929173] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 15:58:49.337027 [ 4.944035] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 15:58:49.349067 [ 4.949051] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 15:58:49.349129 [ 4.950672] SCSI subsystem initialized Oct 3 15:58:49.361078 [ 4.958219] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 15:58:49.361143 [ 4.964576] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 15:58:49.373065 [ 4.966888] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo Oct 3 15:58:49.373140 [ 4.979839] mmc_host mmc0: card is polling. Oct 3 15:58:49.385029 [ 5.015304] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 15:58:49.420118 [ 5.026866] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo Oct 3 15:58:49.433156 [ 5.034380] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 15:58:49.445045 [ 5.078391] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 15:58:49.481131 [ 5.103272] phy phy-12130000.phy.2: phy_power_on was called before phy_init Oct 3 15:58:49.505113 [ 5.115558] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 15:58:49.517101 [ 5.124046] phy phy-12130000.phy.2: phy_power_on was called before phy_init Oct 3 15:58:49.529058 [ 5.138578] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Oct 3 15:58:49.541085 [ 5.144859] exynos-ohci 12120000.usb: USB Host Controller Oct 3 15:58:49.553028 [ 5.153903] exynos-ehci 12110000.usb: irq 109, io mem 0x12110000 Oct 3 15:58:49.553092 [ 5.164553] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Oct 3 15:58:49.565100 [ 5.171160] exynos-ohci 12120000.usb: irq 109, io mem 0x12120000 Oct 3 15:58:49.577133 [ 5.178719] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 15:58:49.577197 [ 5.183978] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 15:58:49.589302 [ 5.191584] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 15:58:49.601104 [ 5.198761] usb usb1: Product: EHCI Host Controller Oct 3 15:58:49.601165 [ 5.203606] usb usb1: Manufacturer: Linux 6.1.0-25-armmp-lpae ehci_hcd Oct 3 15:58:49.613064 [ 5.210129] usb usb1: SerialNumber: 12110000.usb Oct 3 15:58:49.613125 [ 5.219579] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 15:58:49.625098 [ 5.226001] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 15:58:49.637020 [ 5.235373] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 15:58:49.637093 [ 5.243749] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 15:58:49.649049 [ 5.248269] hub 1-0:1.0: USB hub found Oct 3 15:58:49.661007 [ 5.257266] mmc1: new high speed SDHC card at address aaaa Oct 3 15:58:49.661071 [ 5.266874] mmc0: new DDR MMC card at address 0001 Oct 3 15:58:49.673051 [ 5.272236] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 15:58:49.673123 [ 5.279208] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Oct 3 15:58:49.684991 [ 5.290647] hub 1-0:1.0: 3 ports detected Oct 3 15:58:49.696982 [ 5.301734] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Oct 3 15:58:49.709041 [ 5.302382] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 15:58:49.709113 [ 5.307712] mmcblk0: p1 p2 p3 p4 Oct 3 15:58:49.709159 [ 5.313012] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 15:58:49.721146 [ 5.319935] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Oct 3 15:58:49.733125 [ 5.323555] usb usb2: Product: USB Host Controller Oct 3 15:58:49.733188 [ 5.332334] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Oct 3 15:58:49.733274 [ 5.333203] usb usb2: Manufacturer: Linux 6.1.0-25-armmp-lpae ohci_hcd Oct 3 15:58:49.749136 [ 5.341458] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (241:0) Oct 3 15:58:49.749201 [ 5.344656] usb usb2: SerialNumber: 12120000.usb Oct 3 15:58:49.749288 [ 5.357684] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 15:58:49.761076 [ 5.363332] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Oct 3 15:58:49.773072 [ 5.372156] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 15:58:49.784997 [ 5.432768] scsi host0: ahci-dwc Oct 3 15:58:49.833058 [ 5.439716] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 110 Oct 3 15:58:49.845153 [ 5.449447] hub 2-0:1.0: USB hub found Oct 3 15:58:49.845211 [ 5.452068] hub 2-0:1.0: 3 ports detected Oct 3 15:58:49.857094 [ 5.680167] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 15:58:50.088990 [ 5.754408] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 15:58:50.161077 [ 5.862846] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 15:58:50.269022 [ 5.922368] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 15:58:50.329035 [ 5.927977] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 15:58:50.329113 [ 5.933783] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 15:58:50.341022 [ 5.941285] ata1.00: configured for UDMA/133 Oct 3 15:58:50.341104 [ 5.944989] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 15:58:50.353026 [ 5.970806] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 15:58:50.377145 [ 6.011043] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 15:58:50.413023 [ 6.015127] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 15:58:50.425054 [ 6.023311] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 15:58:50.425142 [ 6.032138] xhci-hcd xhci-hcd.2.auto: irq 111, io mem 0x12000000 Oct 3 15:58:50.437029 [ 6.038322] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 15:58:50.437107 [ 6.043553] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 15:58:50.449107 [ 6.051217] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 15:58:50.461029 [ 6.057857] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 15:58:50.461117 [ 6.065945] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 15:58:50.472984 [ 6.073156] usb usb3: Product: xHCI Host Controller Oct 3 15:58:50.473077 [ 6.078018] usb usb3: Manufacturer: Linux 6.1.0-25-armmp-lpae xhci-hcd Oct 3 15:58:50.485016 [ 6.084573] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 15:58:50.485101 [ 6.089545] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 15:58:50.501137 [ 6.101022] hub 3-0:1.0: USB hub found Oct 3 15:58:50.501215 [ 6.103385] hub 3-0:1.0: 1 port detected Oct 3 15:58:50.501262 [ 6.109893] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 15:58:50.513101 [ 6.116711] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 15:58:50.525075 [ 6.124814] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 15:58:50.525075 [ 6.132020] usb usb4: Product: xHCI Host Controller Oct 3 15:58:50.537061 [ 6.136861] usb usb4: Manufacturer: Linux 6.1.0-25-armmp-lpae xhci-hcd Oct 3 15:58:50.537149 [ 6.143377] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 15:58:50.549055 [ 6.150896] hub 4-0:1.0: USB hub found Oct 3 15:58:50.549119 [ 6.153236] hub 4-0:1.0: 1 port detected Oct 3 15:58:50.561026 [ 6.154122] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 15:58:50.561114 [ 6.164578] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 15:58:50.573124 [ 6.173321] sd 0:0:0:0: [sda] Write Protect is off Oct 3 15:58:50.573191 [ 6.176775] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 15:58:50.585070 [ 6.186528] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 15:58:50.585155 [ 6.198783] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 15:58:50.609038 [ 6.212634] sda: sda1 sda2 < sda5 > Oct 3 15:58:50.609096 [ 6.215497] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 15:58:50.621010 [ 6.307048] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 15:58:50.717005 [ 6.415011] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 15:58:50.825098 [ 6.523108] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 15:58:50.932951 [ 6.631110] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 15:58:51.041067 [ 7.039613] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 15:58:51.449015 [ 7.147235] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 15:58:51.553129 [ 7.238323] random: crng init done Oct 3 15:58:51.637125 [ 7.347275] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. Oct 3 15:58:51.757137 [ 7.358209] device-mapper: uevent: version 1.0.3 Oct 3 15:58:51.757170 [ 7.366356] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Oct 3 15:58:51.769364 [ 7.758463] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 15:58:52.169026 Begin: Loading essential drivers ... done. Oct 3 15:58:52.401029 Begin: Running /scripts/init-premount ... done. Oct 3 15:58:55.413107 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 15:58:55.413189 Begin: Running /scripts/local-premount ... done. Oct 3 15:58:55.496848 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 15:58:55.545175 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 15:58:55.644952 /dev/mapper/arndale--westfield--vg-root: clean, 39343/1220608 files, 378236/4882432 blocks Oct 3 15:58:55.847280 done. Oct 3 15:58:55.872845 [ 11.583806] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 15:58:55.992894 [ 11.775058] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 15:58:56.184978 done. Oct 3 15:58:56.185031 Begin: Running /scripts/local-bottom ... done. Oct 3 15:58:56.228901 Begin: Running /scripts/init-bottom ... done. Oct 3 15:58:56.264960 [ 12.107783] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. Oct 3 15:58:56.517020 INIT: version 3.06 booting Oct 3 15:58:56.840991 INIT: No inittab.d directory found Oct 3 15:58:56.936979 Using makefile-style concurrent boot in runlevel S. Oct 3 15:58:57.236865 Starting hotplug events dispatcher: systemd-udevd. Oct 3 15:58:58.828842 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 15:58:59.080905 Synthesizing the initial hotplug events (devices)...done. Oct 3 15:58:59.596869 Waiting for /dev to be fully populated...[ 15.429580] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 15:58:59.836895 [ 15.458983] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Oct 3 15:58:59.861028 [ 15.647305] sd 0:0:0:0: Attached scsi generic sg0 type 0 Oct 3 15:59:00.053023 [ 15.648272] panfrost 11800000.gpu: clock rate = 533000000 Oct 3 15:59:00.053096 [ 15.701756] panfrost 11800000.gpu: mali-t600 id 0x600 major 0x0 minor 0x0 status 0x1 Oct 3 15:59:00.112292 [ 15.708114] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,31b4dfff Oct 3 15:59:00.129574 [ 15.716217] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 Oct 3 15:59:00.129730 [ 15.727988] panfrost 11800000.gpu: shader_present=0xf l2_present=0x1 Oct 3 15:59:00.136917 [ 15.749631] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 15:59:00.160922 [ 15.818357] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 0 Oct 3 15:59:00.220939 [ 15.819966] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 15:59:00.232823 [ 15.850323] usb3503 usb-hub: switched to HUB mode Oct 3 15:59:00.256164 [ 15.853585] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 15:59:00.256240 [ 15.934477] blk_print_req_error: 6 callbacks suppressed Oct 3 15:59:00.333098 [ 15.934487] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 15:59:00.345086 [ 16.047842] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 15:59:00.453084 [ 16.156843] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 15:59:00.561042 [ 16.182437] usb 1-3: new high-speed USB device number 2 using exynos-ehci Oct 3 15:59:00.585011 [ 16.265041] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 15:59:00.668894 [ 16.355167] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Oct 3 15:59:00.764826 [ 16.362076] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 3 15:59:00.764826 [ 16.371159] hub 1-3:1.0: USB hub found Oct 3 15:59:00.776900 [ 16.373764] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 15:59:00.776900 [ 16.383554] hub 1-3:1.0: 3 ports detected Oct 3 15:59:00.788836 [ 16.483378] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 15:59:00.884901 [ 16.501478] OF: graph: no port node found in /soc/hdmi@14530000 Oct 3 15:59:00.908853 [ 16.591477] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 15:59:00.993045 [ 16.700097] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 15:59:01.100842 [ 16.718482] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 15:59:01.125004 [ 16.836030] usb 1-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=77.32 Oct 3 15:59:01.244899 [ 16.843276] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Oct 3 15:59:01.244899 [ 16.850581] usb 1-3.2: Product: USB2.0 Hub Oct 3 15:59:01.256873 [ 16.862094] hub 1-3.2:1.0: USB hub found Oct 3 15:59:01.269002 [ 16.865852] hub 1-3.2:1.0: 4 ports detected Oct 3 15:59:01.269071 [ 17.110904] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 15:59:01.520879 [ 17.186397] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 15:59:01.592874 [ 17.218953] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 15:59:01.629026 [ 17.305175] usb 1-3.2.4: New USB device found, idVendor=0b95, idProduct=772a, bcdDevice= 0.01 Oct 3 15:59:01.713041 [ 17.312635] usb 1-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Oct 3 15:59:01.713110 [ 17.319897] usb 1-3.2.4: Product: AX88772 Oct 3 15:59:01.724998 [ 17.324255] usb 1-3.2.4: Manufacturer: ASIX Elec. Corp. Oct 3 15:59:01.725061 [ 17.329251] usb 1-3.2.4: SerialNumber: 000001 Oct 3 15:59:01.737006 [ 17.835793] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 15:59:02.241727 [ 17.850281] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 15:59:02.253782 [ 18.545033] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 15:59:02.949797 [ 18.560833] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Oct 3 15:59:02.973753 [ 18.574656] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 42:e0:b8:b7:a1:9e Oct 3 15:59:02.985844 [ 18.586917] usbcore: registered new interface driver asix Oct 3 15:59:02.985907 done. Oct 3 15:59:03.261705 [ 19.423591] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 15:59:03.825720 Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). Oct 3 15:59:03.849739 Checking file systems.../dev/sda1: clean, 922/61056 files, 25401/243968 blocks Oct 3 15:59:05.157717 done. Oct 3 15:59:05.205775 Cleaning up temporary files... /tmp. Oct 3 15:59:05.481674 [ 21.270334] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 15:59:05.673761 [ 21.319240] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 15:59:05.721776 [ 21.572275] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k FS Oct 3 15:59:05.985688 Mounting local filesystems...done. Oct 3 15:59:06.421725 Activating swapfile swap, if any...done. Oct 3 15:59:06.433769 Cleaning up temporary files.... Oct 3 15:59:06.457836 Starting Setting kernel variables: sysctl. Oct 3 15:59:06.625707 [ 22.813976] audit: type=1400 audit(1727971147.292:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=893 comm="apparmor_parser" Oct 3 15:59:07.225835 [ 22.830687] audit: type=1400 audit(1727971147.292:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=894 comm="apparmor_parser" Oct 3 15:59:07.237859 [ 22.844583] audit: type=1400 audit(1727971147.312:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=894 comm="apparmor_parser" Oct 3 15:59:07.261728 [ 23.070570] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 15:59:07.477700 [ 23.191556] audit: type=1400 audit(1727971147.672:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=931 comm="apparmor_parser" Oct 3 15:59:07.597805 [ 23.210900] audit: type=1400 audit(1727971147.688:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=931 comm="apparmor_parser" Oct 3 15:59:07.621792 [ 23.224329] audit: type=1400 audit(1727971147.688:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=931 comm="apparmor_parser" Oct 3 15:59:07.633791 [ 23.537911] audit: type=1400 audit(1727971148.016:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=930 comm="apparmor_parser" Oct 3 15:59:07.957649 [ 23.567763] audit: type=1400 audit(1727971148.036:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=930 comm="apparmor_parser" Oct 3 15:59:07.981807 [ 23.583618] audit: type=1400 audit(1727971148.040:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=930 comm="apparmor_parser" Oct 3 15:59:07.993819 [ 23.602524] audit: type=1400 audit(1727971148.068:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=942 comm="apparmor_parser" Oct 3 15:59:08.021727 Starting: AppArmorLoading AppArmor profiles...done. Oct 3 15:59:08.021787 . Oct 3 15:59:08.021826 [ 25.224365] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 15:59:09.625819 [ 25.224478] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 3 15:59:09.637706 Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1 Oct 3 15:59:11.149705 Copyright 2004-2022 Internet Systems Consortium. Oct 3 15:59:11.149742 All rights reserved. Oct 3 15:59:11.149765 For info, please visit https://www.isc.org/software/dhcp/ Oct 3 15:59:11.161676 Oct 3 15:59:11.161703 Listening on LPF/eth0/a6:46:13:77:e8:2f Oct 3 15:59:11.161729 Sending on LPF/eth0/a6:46:13:77:e8:2f Oct 3 15:59:11.161753 Sending on Socket/fallback Oct 3 15:59:11.161776 Created duid "\000\001\000\001.\221{\313\246F\023w\350/". Oct 3 15:59:11.173674 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 Oct 3 15:59:11.173708 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 Oct 3 15:59:11.185671 DHCPOFFER of 10.149.64.45 from 10.149.64.4 Oct 3 15:59:11.185725 DHCPREQUEST for 10.149.64.45 on eth0 to 255.255.255.255 port 67 Oct 3 15:59:11.185754 DHCPACK of 10.149.64.45 from 10.149.64.4 Oct 3 15:59:11.197627 bound to 10.149.64.45 -- renewal in 273 seconds. Oct 3 15:59:11.441743 done. Oct 3 15:59:11.441796 Cleaning up temporary files.... Oct 3 15:59:11.501763 Starting nftables: none Oct 3 15:59:11.573698 . Oct 3 15:59:11.981610 INIT: Entering runlevel: 2 Oct 3 15:59:12.053612 Using makefile-style concurrent boot in runlevel 2. Oct 3 15:59:12.101641 Starting Apache httpd web server: apache2[ 28.639228] exynos4-fb 14400000.fimd: deferred probe timeout, ignoring dependency Oct 3 15:59:13.049766 [ 28.647288] exynos-mixer 14450000.mixer: deferred probe timeout, ignoring dependency Oct 3 15:59:13.049839 [ 28.654372] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations Oct 3 15:59:13.061791 [ 28.661256] exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm]) Oct 3 15:59:13.061860 [ 28.669241] exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm]) Oct 3 15:59:13.073741 [ 28.685539] exynos-drm exynos-drm: bound 14500000.dsi (ops hdmi_enable [exynosdrm]) Oct 3 15:59:13.085761 [ 28.703170] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm]) Oct 3 15:59:13.109732 [ 28.710093] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 15:59:13.109732 [ 28.716778] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 15:59:13.121651 [ 28.724713] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 Oct 3 15:59:13.133628 . Oct 3 15:59:14.177632 Starting NTP server: ntpd2024-10-03T15:59:14 ntpd[1131]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 15:59:14.597674 2024-10-03T15:59:14 ntpd[1131]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 15:59:14.597718 . Oct 3 15:59:14.609552 Starting periodic command scheduler: cron. Oct 3 15:59:14.621579 Starting system message bus: dbus. Oct 3 15:59:14.753794 Starting OpenBSD Secure Shell server: sshd. Oct 3 15:59:15.521553 Oct 3 15:59:16.613772 Debian GNU/Linux 12 arndale-westfield ttySAC2 Oct 3 15:59:16.625717 Oct 3 15:59:16.625765 arndale-westfield login: INIT: Switching to r INIT: No initUsing makefile-style concurrent boot in runlevel 6. Oct 3 16:04:21.545706 Stopping SMP IRQ Balancer: irqbalance. Oct 3 16:04:21.605716 Stopping nftables: none. Oct 3 16:04:21.629688 Stopping hotplug events dispatcher: systemd-udevd. Oct 3 16:04:21.653717 Saving the system clock to /dev/rtc0. Oct 3 16:04:22.061762 Hardware Clock updated to Thu Oct 3 16:04:22 UTC 2024. Oct 3 16:04:22.073694 Stopping Apache httpd web server: apache2. Oct 3 16:04:22.769737 Asking all remaining processes to terminate...done. Oct 3 16:04:23.057738 All processes ended within 1 seconds...done. Oct 3 16:04:23.057799 Deconfiguring network interfaces...ifdown: ignoring unknown interface eth0=eth0 Oct 3 16:04:23.165686 done. Oct 3 16:04:23.165715 [ 339.029249] EXT4-fs (sda1): unmounting filesystem. Oct 3 16:04:23.429716 Deactivating swap...done. Oct 3 16:04:23.489717 Unmounting local filesystems...done. Oct 3 16:04:23.489776 [ 339.361160] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 16:04:23.765676 Will now restart. Oct 3 16:04:24.005728 [ 339.655632] asix 1-3.2.4:1.0 eth0: Link is Down Oct 3 16:04:24.053695 [ 339.723426] sd 0:0:0:0: [sda] Synchronizing SCSI cache Oct 3 16:04:24.125740 [ 339.731167] wake enabled for irq 101 (gpx1-4) Oct 3 16:04:24.125802 [ 339.734051] wake enabled for irq 102 (gpx1-5) Oct 3 16:04:24.137713 [ 339.738420] wake enabled for irq 103 (gpx1-6) Oct 3 16:04:24.137713 [ 339.742748] wake enabled for irq 104 (gpx1-7) Oct 3 16:04:24.137740 [ 339.747086] wake enabled for irq 105 (gpx2-0) Oct 3 16:04:24.149736 [ 339.751426] wake enabled for irq 106 (gpx2-1) Oct 3 16:04:24.149773 [ 339.756290] reboot: Reó Oct 3 16:04:24.485708 Oct 3 16:04:24.485732 Oct 3 16:04:24.485799 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 16:04:24.497751 Oct 3 16:04:24.497803 CPU: Exynos5250@1000MHz Oct 3 16:04:24.497848 Oct 3 16:04:24.497886 Board: Arndale Oct 3 16:04:24.497927 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 16:04:24.497975 ready Oct 3 16:04:24.498014 DRAM: 2 GiB Oct 3 16:04:24.509671 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 16:04:24.521745 trace: enabled Oct 3 16:04:24.557747 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 16:04:24.917705 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 16:04:24.977736 In: serial Oct 3 16:04:24.977791 Out: serial Oct 3 16:04:24.977833 Err: serial Oct 3 16:04:24.977874 SCSI: ARNDALE SCSI INIT Oct 3 16:04:24.977917 Target spinup took 0 ms. Oct 3 16:04:24.989744 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 16:04:24.989823 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 16:04:25.001745 Net: Net Initialization Skipped Oct 3 16:04:25.001805 No ethernet found. Oct 3 16:04:25.001847 Hostname: arndale-westfield Oct 3 16:04:25.001890 Hit any key to stop autoboot: 2  1  0 Oct 3 16:04:26.933743 (Re)start USB... Oct 3 16:04:26.933811 USB0: USB EHCI 1.00 Oct 3 16:04:26.933862 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 16:04:32.525726 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 16:04:32.537824 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 16:04:32.981814 Waiting for Ethernet connection... done. Oct 3 16:04:34.625711 BOOTP broadcast 1 Oct 3 16:04:34.625776 BOOTP broadcast 2 Oct 3 16:04:36.057783 DHCP client bound to address 10.149.64.45 (1482 ms) Oct 3 16:04:36.057856 Using asx0 device Oct 3 16:04:36.057899 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 16:04:36.069748 Filename 'pxelinux.0'. Oct 3 16:04:36.069806 Load address: 0x43e00000 Oct 3 16:04:36.069851 Loading: *### Oct 3 16:04:36.081709 2.2 MiB/s Oct 3 16:04:36.081766 done Oct 3 16:04:36.081842 Bytes transferred = 42430 (a5be hex) Oct 3 16:04:36.093785 missing environment variable: pxeuuid Oct 3 16:04:36.093844 Retrieving file: pxelinux.cfg/0A95402D Oct 3 16:04:36.093890 Using asx0 device Oct 3 16:04:36.093930 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 16:04:36.105777 Filename 'pxelinux.cfg/0A95402D'. Oct 3 16:04:36.105836 Load address: 0x51000000 Oct 3 16:04:36.105880 Loading: *# Oct 3 16:04:36.105919 63.5 KiB/s Oct 3 16:04:36.117776 done Oct 3 16:04:36.117830 Bytes transferred = 65 (41 hex) Oct 3 16:04:36.117875 Config file found Oct 3 16:04:36.117916 Ignoring unknown command: serial Oct 3 16:04:36.117959 1: local Oct 3 16:04:36.117997 scanning bus for devices... Oct 3 16:04:36.129688 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 16:04:36.153775 Type: Hard Disk Oct 3 16:04:36.153831 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 16:04:36.165767 Found 1 device(s). Oct 3 16:04:36.165822 Oct 3 16:04:36.165861 SCSI device 0: Oct 3 16:04:36.165901 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 16:04:36.177789 Type: Hard Disk Oct 3 16:04:36.177846 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 16:04:36.177896 ... is now current device Oct 3 16:04:36.177938 Scanning scsi 0... Oct 3 16:04:36.189707 Found U-Boot script /boot.scr Oct 3 16:04:36.357726 1755 bytes read in 41 ms (41 KiB/s) Oct 3 16:04:36.405751 ## Executing script at 50000000 Oct 3 16:04:36.417720 Loading dtbs/6.1.112+/exynos5250-arndale.dtb Oct 3 16:04:36.417781 46686 bytes read in 1448 ms (31.3 KiB/s) Oct 3 16:04:37.821733 1015824 bytes read in 119 ms (8.1 MiB/s) Oct 3 16:04:37.965757 Loaded xen-4.20-unstable to 0x41000000 (f8010) Oct 3 16:04:37.965817 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan sched=credit Oct 3 16:04:37.977788 10039808 bytes read in 462 ms (20.7 MiB/s) Oct 3 16:04:38.445711 Loaded vmlinuz-6.1.112+ to 0x42000000 (993200) Oct 3 16:04:38.457814 command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 16:04:38.469865 12059111 bytes read in 512 ms (22.5 MiB/s) Oct 3 16:04:38.985835 Loaded initrd.img-6.1.112+ to 0x43300000 (b801e7) Oct 3 16:04:38.997854 chosen { Oct 3 16:04:38.997927 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan sched=credit"; Oct 3 16:04:39.009787 #size-cells = <0x00000001>; Oct 3 16:04:39.009859 #address-cells = <0x00000001>; Oct 3 16:04:39.009923 stdout-path = "serial2:115200n8"; Oct 3 16:04:39.009982 module@1 { Oct 3 16:04:39.021754 reg = <0x43300000 0x00b801e7>; Oct 3 16:04:39.021812 compatible = "xen,linux-initrd", "xen,multiboot-module"; Oct 3 16:04:39.021862 }; Oct 3 16:04:39.021900 module@0 { Oct 3 16:04:39.021940 bootargs = "ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Oct 3 16:04:39.045779 reg = <0x42000000 0x00993200>; Oct 3 16:04:39.045851 compatible = "xen,linux-zimage", "xen,multiboot-module"; Oct 3 16:04:39.045904 }; Oct 3 16:04:39.045943 }; Oct 3 16:04:39.045981 Booting 0x41000000 - 0x43000000 Oct 3 16:04:39.057852 Kernel image @ 0x41000000 [ 0x000000 - 0x135000 ] Oct 3 16:04:39.057934 ## Flattened Device Tree blob at 43000000 Oct 3 16:04:39.058005 Booting using the fdt blob at 0x43000000 Oct 3 16:04:39.069838 reserving fdt memory region: addr=43000000 size=c000 Oct 3 16:04:39.069923 Loading Device Tree to 4fff1000, end 4fffffff ... OK Oct 3 16:04:39.069995 Oct 3 16:04:39.081764 Starting kernel ...(fake run for tracing) Oct 3 16:04:39.081843 Oct 3 16:04:39.081898 Oct 3 16:04:39.081970 Starting kernel ... Oct 3 16:04:39.093686 Oct 3 16:04:39.093738 __ __ _ _ ____ ___ _ _ _ Oct 3 16:04:39.141854 \ \/ /___ _ __ | || | |___ \ / _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Oct 3 16:04:39.141935 \ // _ \ '_ \ | || |_ __) | | | |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Oct 3 16:04:39.153843 / \ __/ | | | |__ _| / __/| |_| |__| |_| | | | \__ \ || (_| | |_) | | __/ Oct 3 16:04:39.153932 /_/\_\___|_| |_| |_|(_)_____|\___/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Oct 3 16:04:39.165773 Oct 3 16:04:39.165824 (XEN) Xen version 4.20-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Thu Oct 3 15:21:50 UTC 2024 Oct 3 16:04:39.177842 (XEN) Latest ChangeSet: Wed Oct 2 08:59:03 2024 +0200 git:b102c9f1ce Oct 3 16:04:39.189843 (XEN) build-id: 51582c216da8646d6c60fa2305b80721a649af73 Oct 3 16:04:39.189924 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Oct 3 16:04:39.201843 (XEN) 32-bit Execution: Oct 3 16:04:39.201916 (XEN) Processor Features: 00001031:00011011 Oct 3 16:04:39.201982 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Oct 3 16:04:39.213764 (XEN) Extensions: GenericTimer Security Oct 3 16:04:39.213843 (XEN) Debug Features: 02010555 Oct 3 16:04:39.213913 (XEN) Auxiliary Features: 00000000 Oct 3 16:04:39.213962 (XEN) Memory Model Features: 10201105 20000000 Oct 3 16:04:39.225897 (XEN) 01240000 02102211 Oct 3 16:04:39.225979 (XEN) ISA Features: 02101110 13112111 21232041 Oct 3 16:04:39.226046 (XEN) 11112131 10011142 00000000 Oct 3 16:04:39.237806 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Oct 3 16:04:39.249758 (XEN) Set SYSRAM to 0000000041000070 (00200070) Oct 3 16:04:39.249818 (XEN) SMP: Allowing 2 CPUs Oct 3 16:04:39.249862 (XEN) enabled workaround for: ARM erratum 766422 Oct 3 16:04:39.261795 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Oct 3 16:04:39.261876 (XEN) GICv2 initialization: Oct 3 16:04:39.261924 (XEN) gic_dist_addr=0000000010481000 Oct 3 16:04:39.273772 (XEN) gic_cpu_addr=0000000010482000 Oct 3 16:04:39.273850 (XEN) gic_hyp_addr=0000000010484000 Oct 3 16:04:39.273916 (XEN) gic_vcpu_addr=0000000010486000 Oct 3 16:04:39.285766 (XEN) gic_maintenance_irq=25 Oct 3 16:04:39.285824 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Oct 3 16:04:39.285872 (XEN) Using scheduler: SMP Credit Scheduler (credit) Oct 3 16:04:39.297807 (XEN) Allocated console ring of 16 KiB. Oct 3 16:04:39.297888 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Oct 3 16:04:39.309755 (XEN) CPU0: Guest atomics will try 2 times before pausing the domain Oct 3 16:04:39.309819 (XEN) Bringing up CPU1 Oct 3 16:04:39.309862 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Oct 3 16:04:39.321770 (XEN) Brought up 2 CPUs Oct 3 16:04:39.321825 (XEN) CPU 1 booted. Oct 3 16:04:39.321868 (XEN) I/O virtualisation disabled Oct 3 16:04:39.321911 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Oct 3 16:04:39.333751 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Oct 3 16:04:39.333813 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Oct 3 16:04:39.345754 (XEN) alternatives: Patching with alt table 002c31f0 -> 002c32c8 Oct 3 16:04:39.345818 (XEN) CPU0 will execute ICIALLU on guest exit Oct 3 16:04:39.345864 (XEN) CPU1 will execute ICIALLU on guest exit Oct 3 16:04:39.357766 (XEN) *** LOADING DOMAIN 0 *** Oct 3 16:04:39.357823 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Oct 3 16:04:39.357872 (XEN) Loading ramdisk from boot module @ 0000000043300000 Oct 3 16:04:39.369736 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Oct 3 16:04:39.369798 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Oct 3 16:04:39.969857 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Oct 3 16:04:39.981802 (XEN) Allocating PPI 16 for event channel interrupt Oct 3 16:04:40.005816 (XEN) d0: extended regions not supported for 32-bit guests Oct 3 16:04:40.017855 (XEN) Loading zImage from 0000000042000000 to 0000000067600000-0000000067f93200 Oct 3 16:04:40.017941 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d801e7 Oct 3 16:04:40.113739 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b4c2 Oct 3 16:04:40.209763 (XEN) Initial low memory virq threshold set at 0x4000 pages. Oct 3 16:04:40.209825 (XEN) Scrubbing Free RAM in background Oct 3 16:04:40.221753 (XEN) Std. Loglevel: All Oct 3 16:04:40.221809 (XEN) Guest Loglevel: All Oct 3 16:04:40.221853 (XEN) *************************************************** Oct 3 16:04:40.221898 (XEN) WARNING: SILO mode is not enabled. Oct 3 16:04:40.233758 (XEN) It has implications on the security of the system, Oct 3 16:04:40.233818 (XEN) unless the communications have been forbidden between Oct 3 16:04:40.245734 (XEN) untrusted domains. Oct 3 16:04:40.245791 (XEN) *************************************************** Oct 3 16:04:40.245838 (XEN) 3... 2... 1... Oct 3 16:04:43.257784 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 16:04:43.257865 (XEN) Freed 384kB init memory. Oct 3 16:04:43.257909 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 16:04:44.325783 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Oct 3 16:04:44.337801 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Oct 3 16:04:44.349801 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Oct 3 16:04:44.349864 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Oct 3 16:04:44.361809 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:04:44.361872 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 16:04:44.409803 [ 0.000000] Linux version 6.1.112+ (osstest@himrod1) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Thu Oct 3 12:43:01 UTC 2024 Oct 3 16:04:44.421852 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 16:04:44.433760 [ 0.000000] CPU: div instructions available: patching division code Oct 3 16:04:44.433825 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 16:04:44.445766 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 16:04:44.445837 [ 0.000000] Memory policy: Data cache writealloc Oct 3 16:04:44.457763 [ 0.000000] Xen 4.20 support found Oct 3 16:04:44.457821 [ 0.000000] efi: UEFI not found. Oct 3 16:04:44.457866 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 Oct 3 16:04:44.469752 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 16:04:44.469810 [ 0.000000] Zone ranges: Oct 3 16:04:44.469853 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Oct 3 16:04:44.481759 [ 0.000000] Normal empty Oct 3 16:04:44.481817 [ 0.000000] HighMem empty Oct 3 16:04:44.481860 [ 0.000000] Movable zone start for each node Oct 3 16:04:44.493764 [ 0.000000] Early memory node ranges Oct 3 16:04:44.493822 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Oct 3 16:04:44.505757 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Oct 3 16:04:44.505822 [ 0.000000] psci: probing for conduit method from DT. Oct 3 16:04:44.517787 [ 0.000000] psci: PSCIv1.1 detected in firmware. Oct 3 16:04:44.517848 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Oct 3 16:04:44.517897 [ 0.000000] psci: Trusted OS migration not required Oct 3 16:04:44.529846 [ 0.000000] psci: SMC Calling Convention v1.2 Oct 3 16:04:44.529906 [ 0.000000] percpu: Embedded 16 pages/cpu s35412 r8192 d21932 u65536 Oct 3 16:04:44.541787 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 Oct 3 16:04:44.541884 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 16:04:44.565748 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 16:04:44.565817 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Oct 3 16:04:44.577772 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Oct 3 16:04:44.589749 [ 0.000000] Memory: 416844K/524288K available (14336K kernel code, 2180K rwdata, 5604K rodata, 2048K init, 438K bss, 41908K reserved, 65536K cma-reserved, 0K highmem) Oct 3 16:04:44.601766 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 16:04:44.601831 [ 0.000000] trace event string verifier disabled Oct 3 16:04:44.613764 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 16:04:44.613825 [ 0.000000] rcu: RCU event tracing is enabled. Oct 3 16:04:44.625752 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Oct 3 16:04:44.625817 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Oct 3 16:04:44.637793 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 16:04:44.637858 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 16:04:44.649805 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 16:04:44.649867 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 16:04:44.661762 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Oct 3 16:04:44.661826 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 16:04:44.673780 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 16:04:44.685823 [ 0.000013] Switching to timer-based delay loop, resolution 41ns Oct 3 16:04:44.697827 [ 0.000500] Console: colour dummy device 80x30 Oct 3 16:04:44.697888 [ 0.293146] printk: console [hvc0] enabled Oct 3 16:04:44.697938 [ 0.297338] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Oct 3 16:04:44.709807 [ 0.307755] CPU: Testing write buffer coherency: ok Oct 3 16:04:44.721758 [ 0.312680] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 16:04:44.721832 [ 0.322233] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 16:04:44.733765 [ 0.328647] pid_max: default: 32768 minimum: 301 Oct 3 16:04:44.733826 [ 0.333443] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 16:04:44.745767 [ 0.340715] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 16:04:44.757753 [ 0.349124] /cpus/cpu@0 missing clock-frequency property Oct 3 16:04:44.757817 [ 0.353917] /cpus/cpu@1 missing clock-frequency property Oct 3 16:04:44.757867 [ 0.359310] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 16:04:44.769753 [ 0.365821] xen:grant_table: Grant tables using version 1 layout Oct 3 16:04:44.769818 [ 0.371161] Grant table initialized Oct 3 16:04:44.781766 [ 0.374700] xen:events: Using FIFO-based ABI Oct 3 16:04:44.781827 [ 0.379020] Xen: initializing cpu0 Oct 3 16:04:44.781872 [ 0.382564] Setting up static identity map for 0x60300000 - 0x603000ac Oct 3 16:04:44.793769 [ 0.390280] rcu: Hierarchical SRCU implementation. Oct 3 16:04:44.793830 [ 0.393935] rcu: Max phase no-delay instances is 1000. Oct 3 16:04:44.805748 [ 0.402000] EFI services will not be available. Oct 3 16:04:44.805809 [ 0.405306] smp: Bringing up secondary CPUs ... Oct 3 16:04:44.817685 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:04:44.877774 [ 0.479895] Xen: initializing cpu1 Oct 3 16:04:44.889752 [ 0.480042] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 16:04:44.889815 [ 0.480071] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 16:04:44.901774 [ 0.498953] smp: Brought up 1 node, 2 CPUs Oct 3 16:04:44.901833 [ 0.502724] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 16:04:44.913705 [ 0.509033] CPU: All CPU(s) started in SVC mode. Oct 3 16:04:44.913738 [ 0.514442] devtmpfs: initialized Oct 3 16:04:44.925695 [ 0.526997] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 16:04:44.937773 [ 0.533484] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Oct 3 16:04:44.949773 [ 0.543206] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 16:04:44.949837 [ 0.551209] pinctrl core: initialized pinctrl subsystem Oct 3 16:04:44.961762 [ 0.557788] DMI not present or invalid. Oct 3 16:04:44.961822 [ 0.560872] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 16:04:44.973740 [ 0.568093] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 16:04:44.973806 [ 0.576895] thermal_sys: Registered thermal governor 'step_wise' Oct 3 16:04:44.985732 [ 0.577027] software IO TLB: area num 2. Oct 3 16:04:44.985791 [ 0.585704] software IO TLB: only able to allocate 8 MB Oct 3 16:04:44.997758 [ 0.592836] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Oct 3 16:04:44.997823 [ 0.598034] No ATAGs? Oct 3 16:04:44.997867 [ 0.600350] hw-breakpoint: Failed to enable monitor mode on CPU 0. Oct 3 16:04:45.009757 [ 0.608926] Serial: AMBA PL011 UART driver Oct 3 16:04:45.009817 [ 0.641034] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 62 Oct 3 16:04:45.045751 [ 0.690472] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 16:04:45.105673 [ 0.725258] xen:balloon: Initialising balloon driver Oct 3 16:04:45.129768 [ 0.732844] iommu: Default domain type: Translated Oct 3 16:04:45.141790 [ 0.736346] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 16:04:45.141854 [ 0.743344] SCSI subsystem initialized Oct 3 16:04:45.153758 [ 0.746943] usbcore: registered new interface driver usbfs Oct 3 16:04:45.153821 [ 0.752090] usbcore: registered new interface driver hub Oct 3 16:04:45.165759 [ 0.757499] usbcore: registered new device driver usb Oct 3 16:04:45.165820 [ 0.764123] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 16:04:45.165869 [ 0.767753] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 16:04:45.177756 [ 0.774047] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 16:04:45.189761 [ 0.782491] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 16:04:45.189833 [ 0.791617] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 16:04:45.201781 [ 0.797141] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 16:04:45.201850 [ 0.801825] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 16:04:45.213767 [ 0.808095] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 16:04:45.213829 [ 0.813300] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 16:04:45.225762 [ 0.818073] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 16:04:45.225827 [ 0.824197] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 16:04:45.237765 [ 0.829375] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 16:04:45.237827 [ 0.834287] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 16:04:45.237877 [ 0.840318] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 16:04:45.249797 [ 0.846125] pps_core: LinuxPPS API ver. 1 registered Oct 3 16:04:45.249860 [ 0.850541] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 16:04:45.261819 [ 0.859728] PTP clock support registered Oct 3 16:04:45.261880 [ 0.878532] EDAC MC: Ver: 3.0.0 Oct 3 16:04:45.285735 [ 0.882612] vgaarb: loaded Oct 3 16:04:45.285792 [ 0.890135] clocksource: Switched to clocksource arch_sys_counter Oct 3 16:04:45.297848 [ 0.901616] NET: Registered PF_INET protocol family Oct 3 16:04:45.309727 [ 0.905256] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Oct 3 16:04:45.321749 [ 0.913180] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 16:04:45.321854 [ 0.920864] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 16:04:45.333743 [ 0.928650] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Oct 3 16:04:45.345725 [ 0.936497] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Oct 3 16:04:45.345787 [ 0.943784] TCP: Hash tables configured (established 4096 bind 4096) Oct 3 16:04:45.357739 [ 0.950151] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 16:04:45.357805 [ 0.956695] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 16:04:45.369758 [ 0.963829] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 16:04:45.369821 [ 0.969897] RPC: Registered named UNIX socket transport module. Oct 3 16:04:45.381739 [ 0.975450] RPC: Registered udp transport module. Oct 3 16:04:45.381800 [ 0.980219] RPC: Registered tcp transport module. Oct 3 16:04:45.393773 [ 0.984976] RPC: Registered tcp NFSv4.1 backchannel transport module. Oct 3 16:04:45.393840 [ 0.991505] PCI: CLS 0 bytes, default 64 Oct 3 16:04:45.393887 [ 0.996815] Initialise system trusted keyrings Oct 3 16:04:45.405722 [ 1.000255] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Oct 3 16:04:45.405787 [ 1.011687] squashfs: version 4.0 (2009/01/31) Phillip Lougher Oct 3 16:04:45.417764 [ 1.013081] Trying to unpack rootfs image as initramfs... Oct 3 16:04:45.429730 [ 1.016842] NFS: Registering the id_resolver key type Oct 3 16:04:45.429792 [ 1.026790] Key type id_resolver registered Oct 3 16:04:45.429839 [ 1.031034] Key type id_legacy registered Oct 3 16:04:45.441737 [ 1.035167] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Oct 3 16:04:45.441797 [ 1.041863] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Oct 3 16:04:45.453744 [ 1.049610] Key type asymmetric registered Oct 3 16:04:45.453803 [ 1.053544] Asymmetric key parser 'x509' registered Oct 3 16:04:45.465749 [ 1.058562] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 16:04:45.465844 [ 1.065934] io scheduler mq-deadline registered Oct 3 16:04:45.477729 [ 1.070511] io scheduler kyber registered Oct 3 16:04:45.477789 [ 1.088445] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 16:04:45.501730 [ 1.175598] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 16:04:45.585763 [ 1.181857] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 16:04:45.597715 [ 1.223435] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 16:04:45.633777 [ 1.229643] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 16:04:45.645655 [ 1.251956] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 16:04:45.657725 [ 1.258156] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 16:04:45.669711 [ 1.290692] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 16:04:45.705788 [ 1.296896] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 16:04:45.705893 [ 1.325470] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 16:04:45.741748 [ 1.392344] xen:xen_evtchn: Event-channel device installed Oct 3 16:04:45.801715 [ 1.609895] Freeing initrd memory: 11780K Oct 3 16:04:46.017768 [ 1.619870] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 16:04:46.029722 [ 1.628547] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 113, base_baud = 0) is a S3C6400/10 Oct 3 16:04:46.041818 [ 1.636641] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 114, base_baud = 0) is a S3C6400/10 Oct 3 16:04:46.053728 [ 1.645624] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 115, base_baud = 0) is a S3C6400/10 Oct 3 16:04:46.053794 [ 1.654904] SuperH (H)SCI(F) driver initialized Oct 3 16:04:46.065732 [ 1.659802] STMicroelectronics ASC driver initialized Oct 3 16:04:46.065787 [ 1.665308] STM32 USART driver initialized Oct 3 16:04:46.065833 [ 1.669732] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 16:04:46.077701 [ 1.713128] brd: module loaded Oct 3 16:04:46.113709 [ 1.719001] loop: module loaded Oct 3 16:04:46.125691 [ 1.736369] Invalid max_queues (4), will use default max: 2. Oct 3 16:04:46.149662 [ 1.763090] tun: Universal TUN/TAP device driver, 1.6 Oct 3 16:04:46.173740 [ 1.766962] CAN device driver interface Oct 3 16:04:46.173799 [ 1.772108] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Oct 3 16:04:46.185726 [ 1.782600] xen_netfront: Initialising Xen virtual ethernet driver Oct 3 16:04:46.185791 [ 1.787470] pegasus: Pegasus/Pegasus II USB Ethernet driver Oct 3 16:04:46.197736 [ 1.793107] usbcore: registered new interface driver pegasus Oct 3 16:04:46.197799 [ 1.798801] usbcore: registered new interface driver asix Oct 3 16:04:46.209763 [ 1.804291] usbcore: registered new interface driver ax88179_178a Oct 3 16:04:46.209826 [ 1.810444] usbcore: registered new interface driver cdc_ether Oct 3 16:04:46.221738 [ 1.816338] usbcore: registered new interface driver smsc75xx Oct 3 16:04:46.221800 [ 1.822170] usbcore: registered new interface driver smsc95xx Oct 3 16:04:46.233776 [ 1.827961] usbcore: registered new interface driver net1080 Oct 3 16:04:46.233839 [ 1.833706] usbcore: registered new interface driver cdc_subset Oct 3 16:04:46.245760 [ 1.839677] usbcore: registered new interface driver zaurus Oct 3 16:04:46.245823 [ 1.845358] usbcore: registered new interface driver cdc_ncm Oct 3 16:04:46.257764 [ 1.854564] usbcore: registered new interface driver usb-storage Oct 3 16:04:46.257827 [ 1.889204] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 16:04:46.293710 [ 1.898123] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T16:04:47 UTC (1727971487) Oct 3 16:04:46.305769 [ 1.906657] i2c_dev: i2c /dev entries driver Oct 3 16:04:46.317704 [ 1.916867] syscon-poweroff 10040000.system-controller:syscon-poweroff: pm_power_off already claimed for psci_sys_poweroff Oct 3 16:04:46.329719 [ 1.926568] syscon-poweroff: probe of 10040000.system-controller:syscon-poweroff failed with error -16 Oct 3 16:04:46.341740 [ 1.937788] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 16:04:46.341804 [ 1.948547] device-mapper: uevent: version 1.0.3 Oct 3 16:04:46.353696 [ 1.952058] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Oct 3 16:04:46.365783 [ 1.961001] cpu cpu0: OPP table can't be empty Oct 3 16:04:46.365843 [ 1.965993] failed to register cpuidle driver Oct 3 16:04:46.377751 [ 1.969238] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Oct 3 16:04:46.377819 [ 1.977521] sdhci: Secure Digital Host Controller Interface driver Oct 3 16:04:46.389742 [ 1.982616] sdhci: Copyright(c) Pierre Ossman Oct 3 16:04:46.389804 [ 1.990631] sdhci-pltfm: SDHCI platform and OF driver helper Oct 3 16:04:46.401691 [ 1.998283] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 16:04:46.401782 [ 2.003612] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Oct 3 16:04:46.413777 [ 2.010222] usbcore: registered new interface driver usbhid Oct 3 16:04:46.413844 [ 2.015058] usbhid: USB HID core driver Oct 3 16:04:46.425693 [ 2.025878] NET: Registered PF_INET6 protocol family Oct 3 16:04:46.437772 [ 2.030650] Segment Routing with IPv6 Oct 3 16:04:46.437831 [ 2.033236] In-situ OAM (IOAM) with IPv6 Oct 3 16:04:46.437878 [ 2.037251] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Oct 3 16:04:46.449719 [ 2.043676] NET: Registered PF_PACKET protocol family Oct 3 16:04:46.449777 [ 2.048323] can: controller area network core Oct 3 16:04:46.461797 [ 2.052808] NET: Registered PF_CAN protocol family Oct 3 16:04:46.461886 [ 2.057593] can: raw protocol Oct 3 16:04:46.461956 [ 2.060684] can: broadcast manager protocol Oct 3 16:04:46.473741 [ 2.064890] can: netlink gateway - max_hops=1 Oct 3 16:04:46.473804 [ 2.069557] Key type dns_resolver registered Oct 3 16:04:46.473852 [ 2.074295] ThumbEE CPU extension supported. Oct 3 16:04:46.485787 [ 2.077997] Registering SWP/SWPB emulation handler Oct 3 16:04:46.485848 [ 2.083344] Loading compiled-in X.509 certificates Oct 3 16:04:46.485897 [ 2.112011] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 16:04:46.521731 [ 2.118072] clk: Not disabling unused clocks Oct 3 16:04:46.521793 [ 2.125154] Freeing unused kernel image (initmem) memory: 2048K Oct 3 16:04:46.533763 [ 2.131395] Run /init as init process Oct 3 16:04:46.533822 Loading, please wait... Oct 3 16:04:46.557725 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 16:04:46.629736 [ 3.526320] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 16:04:47.937742 [ 3.545159] phy phy-12130000.phy.6: phy_power_on was called before phy_init Oct 3 16:04:47.949738 [ 3.550812] exynos-ohci 12120000.usb: USB Host Controller Oct 3 16:04:47.961766 [ 3.556242] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Oct 3 16:04:47.961836 [ 3.586414] phy phy-12130000.phy.6: phy_power_on was called before phy_init Oct 3 16:04:47.997805 [ 3.592059] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 16:04:47.997869 [ 3.597584] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Oct 3 16:04:48.009799 [ 3.607006] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 Oct 3 16:04:48.009882 [ 3.616251] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 Oct 3 16:04:48.021791 [ 3.634958] Synopsys Designware Multimedia Card Interface Driver Oct 3 16:04:48.045790 [ 3.661730] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 16:04:48.069854 [ 3.668656] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 16:04:48.081776 [ 3.684505] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 16:04:48.093812 [ 3.713380] hub 2-0:1.0: USB hub found Oct 3 16:04:48.117813 [ 3.716938] hub 2-0:1.0: 3 ports detected Oct 3 16:04:48.117874 [ 3.718998] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 16:04:48.129850 [ 3.728283] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 16:04:48.141823 [ 3.737528] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 16:04:48.141889 [ 3.737605] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 16:04:48.153832 [ 3.750194] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 16:04:48.165843 [ 3.756504] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 16:04:48.165911 [ 3.762095] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo Oct 3 16:04:48.177808 [ 3.776580] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 16:04:48.189854 [ 3.782596] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 16:04:48.189919 [ 3.788584] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 127,32 bit host data width,128 deep fifo Oct 3 16:04:48.201789 [ 3.842436] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 16:04:48.249950 [ 3.849053] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 16:04:48.262114 [ 3.854758] mmc_host mmc0: card is polling. Oct 3 16:04:48.262171 [ 3.861235] hub 1-0:1.0: USB hub found Oct 3 16:04:48.262217 [ 3.867497] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 16:04:48.274196 [ 3.870211] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 16:04:48.286449 [ 3.878892] hub 1-0:1.0: 3 ports detected Oct 3 16:04:48.297883 [ 3.907694] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 16:04:48.322002 [ 3.913425] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Oct 3 16:04:48.322071 [ 3.922331] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 16:04:48.333886 [ 3.939632] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Oct 3 16:04:48.345917 [ 3.944363] s3c-rtc 101e0000.rtc: registered as rtc1 Oct 3 16:04:48.357740 [ 3.971683] scsi host0: ahci-dwc Oct 3 16:04:48.381846 [ 3.973832] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 128 Oct 3 16:04:48.381917 [ 3.990981] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 16:04:48.405805 [ 4.001527] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 16:04:48.417737 [ 4.040462] mmc1: new high speed SDHC card at address aaaa Oct 3 16:04:48.453792 [ 4.045203] mmc0: new DDR MMC card at address 0001 Oct 3 16:04:48.453855 [ 4.055379] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Oct 3 16:04:48.465797 [ 4.062902] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Oct 3 16:04:48.465830 [ 4.078793] mmcblk0: p1 p2 p3 p4 Oct 3 16:04:48.489788 [ 4.082901] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Oct 3 16:04:48.489961 [ 4.089328] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Oct 3 16:04:48.501773 [ 4.096845] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Oct 3 16:04:48.501837 [ 4.500226] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 16:04:48.909826 [ 4.509197] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 16:04:48.921816 [ 4.514570] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 16:04:48.921882 [ 4.522310] ata1.00: configured for UDMA/133 Oct 3 16:04:48.933799 [ 4.526119] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 16:04:48.933870 [ 4.536161] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 16:04:48.945829 [ 4.542339] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 16:04:48.945889 [ 4.547823] sd 0:0:0:0: [sda] Write Protect is off Oct 3 16:04:48.957689 [ 4.552580] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 16:04:48.969924 [ 4.561822] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 16:04:48.969989 [ 4.584962] sda: sda1 sda2 < sda5 > Oct 3 16:04:48.994133 [ 4.587774] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 16:04:48.994133 [ 4.598942] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 16:04:49.005757 [ 4.625898] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Oct 3 16:04:49.041742 [ 4.633017] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 16:04:49.041823 [ 4.637250] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 16:04:49.053836 [ 4.677814] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 16:04:49.089818 [ 4.686051] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Oct 3 16:04:49.101882 [ 4.692106] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 16:04:49.101960 [ 4.697476] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 16:04:49.113867 [ 4.705256] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 16:04:49.113974 [ 4.711875] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 16:04:49.126030 [ 4.721430] hub 3-0:1.0: USB hub found Oct 3 16:04:49.126030 [ 4.725186] hub 3-0:1.0: 1 port detected Oct 3 16:04:49.138136 [ 4.729714] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 16:04:49.138216 [ 4.738014] hub 4-0:1.0: USB hub found Oct 3 16:04:49.149860 [ 4.741207] hub 4-0:1.0: 1 port detected Oct 3 16:04:49.149920 [ 4.789815] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 16:04:49.209766 [ 4.898627] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 16:04:49.317771 [ 5.006749] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 16:04:49.425774 [ 5.114873] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 16:04:49.525874 [ 5.222958] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 16:04:49.633811 [ 5.331038] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 16:04:49.741764 [ 5.439100] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 16:04:49.849819 [ 5.547170] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 16:04:49.957758 [ 5.655250] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 16:04:50.065765 [ 6.063983] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 16:04:50.473868 [ 6.171718] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 16:04:50.581824 [ 6.780062] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 16:04:51.193860 [ 7.200138] random: crng init done Oct 3 16:04:51.601719 Begin: Loading essential drivers ... done. Oct 3 16:04:52.213764 Begin: Running /scripts/init-premount ... done. Oct 3 16:04:55.225917 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 16:04:55.237943 Begin: Running /scripts/local-premount ... done. Oct 3 16:04:55.249801 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 16:04:55.309839 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 16:04:55.417853 /dev/mapper/arndale--westfield--vg-root: clean, 46039/1220608 files, 625943/4882432 blocks Oct 3 16:04:55.621835 done. Oct 3 16:04:55.633779 [ 11.235943] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 16:04:55.645807 [ 11.558519] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 16:04:55.969802 done. Oct 3 16:04:55.969880 Begin: Running /scripts/local-bottom ... done. Oct 3 16:04:56.029711 Begin: Running /scripts/init-bottom ... done. Oct 3 16:04:56.065771 INIT: version 3.06 booting Oct 3 16:04:56.558066 INIT: No inittab.d directory found Oct 3 16:04:56.653796 Using makefile-style concurrent boot in runlevel S. Oct 3 16:04:56.929836 Starting hotplug events dispatcher: systemd-udevd. Oct 3 16:04:58.514073 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 16:04:58.933903 Synthesizing the initial hotplug events (devices)...done. Oct 3 16:04:59.701701 Waiting for /dev to be fully populated...[ 15.383434] wm8994 3-001a: Device is not a WM8994, ID is 0 Oct 3 16:04:59.785739 [ 15.392058] wm8994: probe of 3-001a failed with error -22 Oct 3 16:04:59.797771 [ 15.396609] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Oct 3 16:04:59.809725 [ 15.408994] mc: Linux media interface: v0.10 Oct 3 16:04:59.809784 [ 15.446345] s5p-secss 10830000.sss: s5p-sss driver registered Oct 3 16:04:59.857701 [ 15.505467] videodev: Linux video capture interface: v2.00 Oct 3 16:04:59.917756 [ 15.738019] s5p-mfc 11000000.codec: Adding to iommu group 0 Oct 3 16:05:00.145939 [ 15.739071] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 16:05:00.157713 [ 15.793682] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Oct 3 16:05:00.205689 [ 15.815714] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 16:05:00.229715 [ 15.866342] exynos-gsc 13e00000.gsc: Adding to iommu group 1 Oct 3 16:05:00.277851 [ 15.872105] exynos-gsc 13e10000.gsc: Adding to iommu group 2 Oct 3 16:05:00.277914 [ 15.876638] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 16:05:00.289807 [ 15.886041] exynos-gsc 13e20000.gsc: Adding to iommu group 3 Oct 3 16:05:00.289869 [ 15.886373] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 16:05:00.301826 [ 15.899948] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 16:05:00.313792 [ 15.900834] exynos-gsc 13e30000.gsc: Adding to iommu group 4 Oct 3 16:05:00.313850 [ 15.925773] blk_print_req_error: 6 callbacks suppressed Oct 3 16:05:00.337809 [ 15.925930] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 16:05:00.337887 [ 15.939699] s5p-mfc 11000000.codec: decoder registered as /dev/video3 Oct 3 16:05:00.349723 [ 15.957486] s5p-mfc 11000000.codec: encoder registered as /dev/video4 Oct 3 16:05:00.361777 [ 16.040660] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 16:05:00.445874 [ 16.048710] usb3503 usb-hub: switched to HUB mode Oct 3 16:05:00.457710 [ 16.053407] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 16:05:00.457740 [ 16.149734] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 16:05:00.565695 [ 16.258408] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 16:05:00.673696 [ 16.349735] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Oct 3 16:05:00.757775 [ 16.366555] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 16:05:00.781749 [ 16.400170] usb 2-3: new high-speed USB device number 2 using exynos-ehci Oct 3 16:05:00.805772 [ 16.474647] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 16:05:00.889812 [ 16.582786] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 16:05:00.997784 [ 16.601247] hub 2-3:1.0: USB hub found Oct 3 16:05:01.009810 [ 16.604121] hub 2-3:1.0: 3 ports detected Oct 3 16:05:01.009869 [ 16.690900] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 16:05:01.105841 [ 16.796355] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 16:05:01.201725 [ 16.804070] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 16:05:01.213906 [ 16.812787] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 16:05:01.225812 [ 16.823686] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 16:05:01.237758 [ 16.832349] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 16:05:01.249738 [ 16.841036] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 16:05:01.249805 [ 16.960199] usb 2-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 16:05:01.369715 [ 17.112844] hub 2-3.2:1.0: USB hub found Oct 3 16:05:01.513749 [ 17.115996] hub 2-3.2:1.0: 4 ports detected Oct 3 16:05:01.525749 [ 17.124507] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 16:05:01.537751 [ 17.203686] usbcore: registered new device driver onboard-usb-hub Oct 3 16:05:01.609684 [ 17.232305] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 16:05:01.645667 [ 17.321960] hub 2-3.2:1.0: USB hub found Oct 3 16:05:01.729705 [ 17.324913] hub 2-3.2:1.0: 4 ports detected Oct 3 16:05:01.729728 [ 17.340882] hub 2-3.2:1.0: USB hub found Oct 3 16:05:01.741685 [ 17.345271] hub 2-3.2:1.0: 4 ports detected Oct 3 16:05:01.753727 [ 17.670175] usb 2-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 16:05:02.077922 [ 17.824402] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 16:05:02.233821 [ 17.840776] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 16:05:02.245863 [ 18.532275] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 16:05:02.941838 [ 18.547143] Asix Electronics AX88772A usb-002:004:10: attached PHY driver (mii_bus:phy_addr=usb-002:004:10, irq=POLL) Oct 3 16:05:02.953822 [ 18.556937] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 2a:95:9c:ef:f1:c5 Oct 3 16:05:02.965829 done. Oct 3 16:05:03.205758 [ 19.162752] EXT4-fs (dm-0): re-mounted. Quota mode: disabled. Oct 3 16:05:03.565796 Checking file systems.../dev/sda1: clean, 2105/61056 files, 43332/243968 blocks Oct 3 16:05:04.540807 done. Oct 3 16:05:04.588817 Cleaning up temporary files... /tmp Oct 3 16:05:04.840830 . Oct 3 16:05:04.840830 [ 20.609463] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 16:05:05.024825 [ 20.658099] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 16:05:05.072952 [ 20.753549] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k Oct 3 16:05:05.168876 Mounting local filesystems...done. Oct 3 16:05:05.384836 Activating swapfile swap, if any...done. Oct 3 16:05:05.384836 Cleaning up temporary files.... Oct 3 16:05:05.420828 Starting Setting kernel variables: sysctl. Oct 3 16:05:05.616819 [ 22.602900] xenbr0: port 1(eth0) entered blocking state Oct 3 16:05:07.017025 [ 22.606758] xenbr0: port 1(eth0) entered disabled state Oct 3 16:05:07.017107 [ 22.612264] device eth0 entered promiscuous mode Oct 3 16:05:07.028850 [ 22.622473] asix 2-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 16:05:07.028850 Configuring network interfaces...RTNETLINK answers: Operation not supported Oct 3 16:05:08.829770 Oct 3 16:05:08.829835 Waiting for xenbr0 to get ready (MAXWAIT is 2 seconds). Oct 3 16:05:08.844050 [ 24.817997] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 16:05:09.225709 [ 24.818059] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 3 16:05:09.237679 [ 24.830378] xenbr0: port 1(eth0) entered blocking state Oct 3 16:05:09.237714 [ 24.835571] xenbr0: port 1(eth0) entered forwarding state Oct 3 16:05:09.249670 [ 24.841157] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready Oct 3 16:05:09.249728 done. Oct 3 16:05:09.417599 Cleaning up temporary files.... Oct 3 16:05:09.513612 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Oct 3 16:05:09.561606 Starting nftables: none Oct 3 16:05:09.609655 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Oct 3 16:05:09.705616 failed! Oct 3 16:05:09.705647 startpar: service(s) returned failure: nftables ... failed! Oct 3 16:05:09.705674 INIT: Entering runlevel: 2 Oct 3 16:05:09.717616 Using makefile-style concurrent boot in runlevel 2. Oct 3 16:05:09.741634 Starting Apache httpd web server: apache2AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.149.64.45. Set the 'ServerName' directive globally to suppress this message Oct 3 16:05:10.509966 . Oct 3 16:05:11.565725 Starting NTP server: ntpd2024-10-03T16:05:12 ntpd[1145]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 16:05:12.021706 2024-10-03T16:05:12 ntpd[1145]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 16:05:12.033846 . Oct 3 16:05:12.033897 Starting system message bus: dbus. Oct 3 16:05:12.261766 Starting SMP IRQ Balancer: irqbalance. Oct 3 16:05:12.285766 Starting OpenBSD Secure Shell server: sshd. Oct 3 16:05:13.173777 Starting /usr/local/sbin/oxenstored... Oct 3 16:05:15.609773 Setting domain 0 name, domid and JSON config... Oct 3 16:05:15.626645 Done setting up Dom0 Oct 3 16:05:15.626724 Starting xenconsoled... Oct 3 16:05:15.626766 Starting QEMU as disk backend for dom0 Oct 3 16:05:15.626823 (XEN) common/grant_table.c:1909:d0v1 Expanding d0 grant table from 1 to 2 frames Oct 3 16:05:15.633677 [ 31.291257] vif vif-1 enX1: renamed from eth1 Oct 3 16:05:15.705670 Oct 3 16:05:16.713759 Debian GNU/Linux 12 arndale-westfield hvc0 Oct 3 16:05:16.713832 Oct 3 16:05:16.713871 arndale-westfield login: [ 124.472538] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 16:06:48.888720 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 16:06:55.744673 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 16:13:37.145704 [ 642.421915] EXT4-fs (dm-3): unmounting filesystem. Oct 3 16:15:26.825808 [ 657.631548] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 16:15:42.037768 [ 662.711654] EXT4-fs (dm-3): unmounting filesystem. Oct 3 16:15:47.113028 [ 678.684008] xenbr0: port 2(vif1.0) entered blocking state Oct 3 16:16:03.085712 [ 678.688082] xenbr0: port 2(vif1.0) entered disabled state Oct 3 16:16:03.097722 [ 678.693737] device vif1.0 entered promiscuous mode Oct 3 16:16:03.097756 (XEN) d1v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 16:16:04.165784 (XEN) d1v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:16:04.189768 (XEN) d1v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:16:04.225807 (XEN) d1v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:16:04.249793 (XEN) d1v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:16:04.273821 [ 680.737984] xen-blkback: backend/vbd/1/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 16:16:05.149705 [ 680.790192] xen-blkback: backend/vbd/1/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 16:16:05.197711 (XEN) common/grant_table.c:1909:d1v1 Expanding d1 grant table from 1 to 2 frames Oct 3 16:16:05.233732 (XEN) common/grant_table.c:1909:d1v1 Expanding d1 grant table from 2 to 3 frames Oct 3 16:16:05.245743 [ 680.885719] vif vif-1-0 vif1.0: Guest Rx ready Oct 3 16:16:05.293755 [ 680.888836] IPv6: ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready Oct 3 16:16:05.293821 [ 680.895473] xenbr0: port 2(vif1.0) entered blocking state Oct 3 16:16:05.305737 [ 680.900801] xenbr0: port 2(vif1.0) entered forwarding state Oct 3 16:16:05.305801 (XEN) gnttab_mark_dirty not implemented yet Oct 3 16:16:05.329779 (XEN) common/grant_table.c:1909:d1v2 Expanding d1 grant table from 3 to 4 frames Oct 3 16:16:29.729705 [ 740.924453] xenbr0: port 2(vif1.0) entered disabled state Oct 3 16:17:05.321752 [ 741.290876] xenbr0: port 2(vif1.0) entered disabled state Oct 3 16:17:05.693753 [ 741.295429] device vif1.0 left promiscuous mode Oct 3 16:17:05.693816 [ 741.299526] xenbr0: port 2(vif1.0) entered disabled state Oct 3 16:17:05.705707 [ 768.906950] xenbr0: port 2(vif2.0) entered blocking state Oct 3 16:17:33.308960 [ 768.911032] xenbr0: port 2(vif2.0) entered disabled state Oct 3 16:17:33.321062 [ 768.916639] device vif2.0 entered promiscuous mode Oct 3 16:17:33.321146 (XEN) d2v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 16:17:34.380782 (XEN) d2v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:17:34.392930 (XEN) d2v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:17:34.428760 (XEN) d2v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:17:34.452805 (XEN) d2v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:17:34.488840 [ 770.714063] xen-blkback: backend/vbd/2/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 16:17:35.124744 [ 770.793188] xen-blkback: backend/vbd/2/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 16:17:35.196962 (XEN) common/grant_table.c:1909:d2v2 Expanding d2 grant table from 1 to 2 frames Oct 3 16:17:35.217691 (XEN) common/grant_table.c:1909:d2v2 Expanding d2 grant table from 2 to 3 frames Oct 3 16:17:35.217727 [ 770.867526] vif vif-2-0 vif2.0: Guest Rx ready Oct 3 16:17:35.265696 [ 770.870745] IPv6: ADDRCONF(NETDEV_CHANGE): vif2.0: link becomes ready Oct 3 16:17:35.277631 [ 770.886149] xenbr0: port 2(vif2.0) entered blocking state Oct 3 16:17:35.301629 [ 770.915996] xenbr0: port 2(vif2.0) entered forwarding state Oct 3 16:17:35.313651 (XEN) common/grant_table.c:1909:d2v0 Expanding d2 grant table from 3 to 4 frames Oct 3 16:18:00.625792 [ 825.769246] xenbr0: port 2(vif2.0) entered disabled state Oct 3 16:18:30.168950 [ 826.050514] xenbr0: port 2(vif2.0) entered disabled state Oct 3 16:18:30.453593 [ 826.056762] device vif2.0 left promiscuous mode Oct 3 16:18:30.453593 [ 826.059961] xenbr0: port 2(vif2.0) entered disabled state Oct 3 16:18:30.465563 [ 852.924750] xenbr0: port 2(vif3.0) entered blocking state Oct 3 16:18:57.325578 [ 852.928782] xenbr0: port 2(vif3.0) entered disabled state Oct 3 16:18:57.337543 [ 852.934462] device vif3.0 entered promiscuous mode Oct 3 16:18:57.337543 (XEN) d3v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 16:18:58.429751 (XEN) d3v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:18:58.441743 (XEN) d3v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:18:58.489630 (XEN) d3v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:18:58.513799 (XEN) d3v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:18:58.549613 [ 854.648998] xen-blkback: backend/vbd/3/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 16:18:59.053788 [ 854.929874] xen-blkback: backend/vbd/3/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 16:18:59.341644 (XEN) common/grant_table.c:1909:d3v3 Expanding d3 grant table from 1 to 2 frames Oct 3 16:18:59.365768 (XEN) common/grant_table.c:1909:d3v3 Expanding d3 grant table from 2 to 3 frames Oct 3 16:18:59.377672 [ 855.033123] vif vif-3-0 vif3.0: Guest Rx ready Oct 3 16:18:59.437800 [ 855.036338] IPv6: ADDRCONF(NETDEV_CHANGE): vif3.0: link becomes ready Oct 3 16:18:59.437868 [ 855.043486] xenbr0: port 2(vif3.0) entered blocking state Oct 3 16:18:59.449748 [ 855.048212] xenbr0: port 2(vif3.0) entered forwarding state Oct 3 16:18:59.449811 (XEN) common/grant_table.c:1909:d3v2 Expanding d3 grant table from 3 to 4 frames Oct 3 16:19:20.625630 [ 909.969633] xenbr0: port 2(vif3.0) entered disabled state Oct 3 16:19:54.365757 [ 910.242750] xenbr0: port 2(vif3.0) entered disabled state Oct 3 16:19:54.641788 [ 910.247810] device vif3.0 left promiscuous mode Oct 3 16:19:54.641849 [ 910.251454] xenbr0: port 2(vif3.0) entered disabled state Oct 3 16:19:54.653723 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 16:20:18.433751 [ 937.130161] xenbr0: port 2(vif4.0) entered blocking state Oct 3 16:20:21.533837 [ 937.134262] xenbr0: port 2(vif4.0) entered disabled state Oct 3 16:20:21.533869 [ 937.139831] device vif4.0 entered promiscuous mode Oct 3 16:20:21.545745 (XEN) d4v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 16:20:22.637823 (XEN) d4v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:20:22.649778 (XEN) d4v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:20:22.685703 (XEN) d4v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:20:22.721705 (XEN) d4v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:20:22.757777 [ 938.973563] xen-blkback: backend/vbd/4/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 16:20:23.378008 [ 939.117851] xen-blkback: backend/vbd/4/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 16:20:23.517676 (XEN) common/grant_table.c:1909:d4v0 Expanding d4 grant table from 1 to 2 frames Oct 3 16:20:23.561977 (XEN) common/grant_table.c:1909:d4v0 Expanding d4 grant table from 2 to 3 frames Oct 3 16:20:23.562064 [ 939.246173] vif vif-4-0 vif4.0: Guest Rx ready Oct 3 16:20:23.649770 [ 939.249386] IPv6: ADDRCONF(NETDEV_CHANGE): vif4.0: link becomes ready Oct 3 16:20:23.649820 [ 939.255901] xenbr0: port 2(vif4.0) entered blocking state Oct 3 16:20:23.661697 [ 939.261243] xenbr0: port 2(vif4.0) entered forwarding state Oct 3 16:20:23.673623 (XEN) common/grant_table.c:1909:d4v0 Expanding d4 grant table from 3 to 4 frames Oct 3 16:20:44.181758 [ 994.059525] xenbr0: port 2(vif4.0) entered disabled state Oct 3 16:21:18.461712 [ 994.360545] xenbr0: port 2(vif4.0) entered disabled state Oct 3 16:21:18.761712 [ 994.364992] device vif4.0 left promiscuous mode Oct 3 16:21:18.761749 [ 994.369188] xenbr0: port 2(vif4.0) entered disabled state Oct 3 16:21:18.773595 [ 1021.276091] xenbr0: port 2(vif5.0) entered blocking state Oct 3 16:21:45.673107 [ 1021.280186] xenbr0: port 2(vif5.0) entered disabled state Oct 3 16:21:45.685001 [ 1021.285768] device vif5.0 entered promiscuous mode Oct 3 16:21:45.685064 (XEN) d5v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 16:21:46.744767 (XEN) d5v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:21:46.756913 (XEN) d5v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:21:46.792811 (XEN) d5v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:21:46.816830 (XEN) d5v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:21:46.852775 [ 1023.177044] xen-blkback: backend/vbd/5/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 16:21:47.576953 [ 1023.208694] xen-blkback: backend/vbd/5/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 16:21:47.613001 (XEN) common/grant_table.c:1909:d5v2 Expanding d5 grant table from 1 to 2 frames Oct 3 16:21:47.660848 (XEN) common/grant_table.c:1909:d5v2 Expanding d5 grant table from 2 to 3 frames Oct 3 16:21:47.660848 [ 1023.307571] vif vif-5-0 vif5.0: Guest Rx ready Oct 3 16:21:47.708780 [ 1023.310848] IPv6: ADDRCONF(NETDEV_CHANGE): vif5.0: link becomes ready Oct 3 16:21:47.720791 [ 1023.332010] xenbr0: port 2(vif5.0) entered blocking state Oct 3 16:21:47.732832 [ 1023.336093] xenbr0: port 2(vif5.0) entered forwarding state Oct 3 16:21:47.732832 (XEN) common/grant_table.c:1909:d5v0 Expanding d5 grant table from 3 to 4 frames Oct 3 16:22:08.613721 [ 1074.077484] xenbr0: port 2(vif5.0) entered disabled state Oct 3 16:22:38.481736 [ 1074.371800] xenbr0: port 2(vif5.0) entered disabled state Oct 3 16:22:38.769738 [ 1074.380600] device vif5.0 left promiscuous mode Oct 3 16:22:38.781741 [ 1074.383773] xenbr0: port 2(vif5.0) entered disabled state Oct 3 16:22:38.781842 [ 1101.183115] xenbr0: port 2(vif6.0) entered blocking state Oct 3 16:23:05.585760 [ 1101.187145] xenbr0: port 2(vif6.0) entered disabled state Oct 3 16:23:05.585841 [ 1101.192817] device vif6.0 entered promiscuous mode Oct 3 16:23:05.597693 (XEN) d6v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 16:23:06.653705 (XEN) d6v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:23:06.665611 (XEN) d6v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:23:06.701713 (XEN) d6v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:23:06.737705 (XEN) d6v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:23:06.761712 [ 1103.096666] xen-blkback: backend/vbd/6/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 16:23:07.505692 [ 1103.202837] xen-blkback: backend/vbd/6/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 16:23:07.601796 (XEN) common/grant_table.c:1909:d6v0 Expanding d6 grant table from 1 to 2 frames Oct 3 16:23:07.625794 (XEN) common/grant_table.c:1909:d6v0 Expanding d6 grant table from 2 to 3 frames Oct 3 16:23:07.637705 [ 1103.301215] vif vif-6-0 vif6.0: Guest Rx ready Oct 3 16:23:07.697736 [ 1103.316061] IPv6: ADDRCONF(NETDEV_CHANGE): vif6.0: link becomes ready Oct 3 16:23:07.721734 [ 1103.321345] xenbr0: port 2(vif6.0) entered blocking state Oct 3 16:23:07.721797 [ 1103.326601] xenbr0: port 2(vif6.0) entered forwarding state Oct 3 16:23:07.733647 (XEN) common/grant_table.c:1909:d6v0 Expanding d6 grant table from 3 to 4 frames Oct 3 16:23:27.473732 [ 1154.416391] xenbr0: port 2(vif6.0) entered disabled state Oct 3 16:23:58.812670 [ 1154.710579] xenbr0: port 2(vif6.0) entered disabled state Oct 3 16:23:59.112874 [ 1154.714930] device vif6.0 left promiscuous mode Oct 3 16:23:59.112874 [ 1154.719218] xenbr0: port 2(vif6.0) entered disabled state Oct 3 16:23:59.124892 [ 1181.544660] xenbr0: port 2(vif7.0) entered blocking state Oct 3 16:24:25.948810 [ 1181.548693] xenbr0: port 2(vif7.0) entered disabled state Oct 3 16:24:25.948810 [ 1181.554434] device vif7.0 entered promiscuous mode Oct 3 16:24:25.948810 (XEN) d7v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 16:24:27.032841 (XEN) d7v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:24:27.056739 (XEN) d7v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:24:27.080815 (XEN) d7v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:24:27.116814 (XEN) d7v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:24:27.140846 [ 1183.325307] xen-blkback: backend/vbd/7/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 16:24:27.732971 [ 1183.407157] xen-blkback: backend/vbd/7/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 16:24:27.805002 (XEN) common/grant_table.c:1909:d7v0 Expanding d7 grant table from 1 to 2 frames Oct 3 16:24:27.841201 (XEN) common/grant_table.c:1909:d7v0 Expanding d7 grant table from 2 to 3 frames Oct 3 16:24:27.841308 [ 1183.500942] vif vif-7-0 vif7.0: Guest Rx ready Oct 3 16:24:27.901082 [ 1183.504459] IPv6: ADDRCONF(NETDEV_CHANGE): vif7.0: link becomes ready Oct 3 16:24:27.901162 [ 1183.510824] xenbr0: port 2(vif7.0) entered blocking state Oct 3 16:24:27.913101 [ 1183.516000] xenbr0: port 2(vif7.0) entered forwarding state Oct 3 16:24:27.913188 (XEN) common/grant_table.c:1909:d7v0 Expanding d7 grant table from 3 to 4 frames Oct 3 16:24:47.993781 [ 1235.430707] xenbr0: port 2(vif7.0) entered disabled state Oct 3 16:25:19.821852 [ 1235.691013] xenbr0: port 2(vif7.0) entered disabled state Oct 3 16:25:20.085812 [ 1235.695709] device vif7.0 left promiscuous mode Oct 3 16:25:20.085901 [ 1235.699707] xenbr0: port 2(vif7.0) entered disabled state Oct 3 16:25:20.097732 [ 1263.393673] xenbr0: port 2(vif8.0) entered blocking state Oct 3 16:25:47.793791 [ 1263.397720] xenbr0: port 2(vif8.0) entered disabled state Oct 3 16:25:47.793806 [ 1263.403375] device vif8.0 entered promiscuous mode Oct 3 16:25:47.805736 (XEN) d8v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 16:25:48.897749 (XEN) d8v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:25:48.909717 (XEN) d8v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:25:48.945726 (XEN) d8v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:25:48.981753 (XEN) d8v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:25:49.005722 [ 1265.154194] xen-blkback: backend/vbd/8/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 16:25:49.557775 [ 1265.194583] xen-blkback: backend/vbd/8/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 16:25:49.593678 (XEN) common/grant_table.c:1909:d8v2 Expanding d8 grant table from 1 to 2 frames Oct 3 16:25:49.617819 (XEN) common/grant_table.c:1909:d8v2 Expanding d8 grant table from 2 to 3 frames Oct 3 16:25:49.617868 [ 1265.317939] vif vif-8-0 vif8.0: Guest Rx ready Oct 3 16:25:49.714077 [ 1265.321170] IPv6: ADDRCONF(NETDEV_CHANGE): vif8.0: link becomes ready Oct 3 16:25:49.725741 [ 1265.327669] xenbr0: port 2(vif8.0) entered blocking state Oct 3 16:25:49.725776 [ 1265.333500] xenbr0: port 2(vif8.0) entered forwarding state Oct 3 16:25:49.737670 (XEN) common/grant_table.c:1909:d8v2 Expanding d8 grant table from 3 to 4 frames Oct 3 16:26:13.100848 [ 1321.005634] xenbr0: port 2(vif8.0) entered disabled state Oct 3 16:26:45.401832 [ 1321.282266] xenbr0: port 2(vif8.0) entered disabled state Oct 3 16:26:45.677706 [ 1321.294893] device vif8.0 left promiscuous mode Oct 3 16:26:45.689730 [ 1321.298080] xenbr0: port 2(vif8.0) entered disabled state Oct 3 16:26:45.701714 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 16:27:00.025798 [ 1348.163027] xenbr0: port 2(vif9.0) entered blocking state Oct 3 16:27:12.556920 [ 1348.167057] xenbr0: port 2(vif9.0) entered disabled state Oct 3 16:27:12.568921 [ 1348.172725] device vif9.0 entered promiscuous mode Oct 3 16:27:12.568921 (XEN) d9v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 16:27:13.637758 (XEN) d9v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:27:13.649766 (XEN) d9v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:27:13.697732 (XEN) d9v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:27:13.721769 (XEN) d9v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:27:13.745978 [ 1350.101883] xen-blkback: backend/vbd/9/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 16:27:14.501781 [ 1350.152362] xen-blkback: backend/vbd/9/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 16:27:14.549859 (XEN) common/grant_table.c:1909:d9v3 Expanding d9 grant table from 1 to 2 frames Oct 3 16:27:14.573769 (XEN) common/grant_table.c:1909:d9v3 Expanding d9 grant table from 2 to 3 frames Oct 3 16:27:14.573820 [ 1350.310296] vif vif-9-0 vif9.0: Guest Rx ready Oct 3 16:27:14.705779 [ 1350.313393] IPv6: ADDRCONF(NETDEV_CHANGE): vif9.0: link becomes ready Oct 3 16:27:14.717797 [ 1350.320754] xenbr0: port 2(vif9.0) entered blocking state Oct 3 16:27:14.717829 [ 1350.325347] xenbr0: port 2(vif9.0) entered forwarding state Oct 3 16:27:14.729819 (XEN) common/grant_table.c:1909:d9v2 Expanding d9 grant table from 3 to 4 frames Oct 3 16:27:35.000782 [ 1405.564119] xenbr0: port 2(vif9.0) entered disabled state Oct 3 16:28:09.965744 [ 1405.872211] xenbr0: port 2(vif9.0) entered disabled state Oct 3 16:28:10.265749 [ 1405.886130] device vif9.0 left promiscuous mode Oct 3 16:28:10.277697 [ 1405.889317] xenbr0: port 2(vif9.0) entered disabled state Oct 3 16:28:10.289718 [ 1432.761992] xenbr0: port 2(vif10.0) entered blocking state Oct 3 16:28:37.153804 [ 1432.766130] xenbr0: port 2(vif10.0) entered disabled state Oct 3 16:28:37.165759 [ 1432.771849] device vif10.0 entered promiscuous mode Oct 3 16:28:37.165826 (XEN) d10v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 16:28:38.233723 (XEN) d10v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:28:38.245746 (XEN) d10v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:28:38.281743 (XEN) d10v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:28:38.305769 (XEN) d10v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:28:38.341629 [ 1434.598211] xen-blkback: backend/vbd/10/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 16:28:39.001763 (XEN) common/grant_table.c:1909:d10v0 Expanding d10 grant table from 1 to 2 frames Oct 3 16:28:39.061738 [ 1434.678738] xen-blkback: backend/vbd/10/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 16:28:39.073764 (XEN) common/grant_table.c:1909:d10v0 Expanding d10 grant table from 2 to 3 frames Oct 3 16:28:39.085730 [ 1434.788964] vif vif-10-0 vif10.0: Guest Rx ready Oct 3 16:28:39.181690 [ 1434.792271] IPv6: ADDRCONF(NETDEV_CHANGE): vif10.0: link becomes ready Oct 3 16:28:39.193778 [ 1434.798921] xenbr0: port 2(vif10.0) entered blocking state Oct 3 16:28:39.193840 [ 1434.804384] xenbr0: port 2(vif10.0) entered forwarding state Oct 3 16:28:39.205722 (XEN) common/grant_table.c:1909:d10v2 Expanding d10 grant table from 3 to 4 frames Oct 3 16:28:59.916864 [ 1489.954501] xenbr0: port 2(vif10.0) entered disabled state Oct 3 16:29:34.349789 [ 1490.181840] xenbr0: port 2(vif10.0) entered disabled state Oct 3 16:29:34.577817 [ 1490.186320] device vif10.0 left promiscuous mode Oct 3 16:29:34.577817 [ 1490.190725] xenbr0: port 2(vif10.0) entered disabled state Oct 3 16:29:34.590058 [ 1517.070294] xenbr0: port 2(vif11.0) entered blocking state Oct 3 16:30:01.461778 [ 1517.074414] xenbr0: port 2(vif11.0) entered disabled state Oct 3 16:30:01.473715 [ 1517.080197] device vif11.0 entered promiscuous mode Oct 3 16:30:01.473778 (XEN) d11v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 16:30:02.553745 (XEN) d11v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:30:02.565718 (XEN) d11v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:30:02.613692 (XEN) d11v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:30:02.637774 (XEN) d11v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:30:02.673700 [ 1518.743764] xen-blkback: backend/vbd/11/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 16:30:03.141786 [ 1518.821402] xen-blkback: backend/vbd/11/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 16:30:03.213764 (XEN) common/grant_table.c:1909:d11v1 Expanding d11 grant table from 1 to 2 frames Oct 3 16:30:03.237766 (XEN) common/grant_table.c:1909:d11v1 Expanding d11 grant table from 2 to 3 frames Oct 3 16:30:03.249721 [ 1518.899344] vif vif-11-0 vif11.0: Guest Rx ready Oct 3 16:30:03.285713 [ 1518.916574] IPv6: ADDRCONF(NETDEV_CHANGE): vif11.0: link becomes ready Oct 3 16:30:03.309758 [ 1518.921902] xenbr0: port 2(vif11.0) entered blocking state Oct 3 16:30:03.321699 [ 1518.927290] xenbr0: port 2(vif11.0) entered forwarding state Oct 3 16:30:03.321764 (XEN) common/grant_table.c:1909:d11v3 Expanding d11 grant table from 3 to 4 frames Oct 3 16:30:23.861732 [ 1570.289776] xenbr0: port 2(vif11.0) entered disabled state Oct 3 16:30:54.685734 [ 1570.560632] xenbr0: port 2(vif11.0) entered disabled state Oct 3 16:30:54.961736 [ 1570.565075] device vif11.0 left promiscuous mode Oct 3 16:30:54.961799 [ 1570.569453] xenbr0: port 2(vif11.0) entered disabled state Oct 3 16:30:54.961849 [ 1598.557883] xenbr0: port 2(vif12.0) entered blocking state Oct 3 16:31:22.957658 [ 1598.562047] xenbr0: port 2(vif12.0) entered disabled state Oct 3 16:31:22.957658 [ 1598.567738] device vif12.0 entered promiscuous mode Oct 3 16:31:22.957658 (XEN) d12v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 16:31:24.029762 (XEN) d12v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:31:24.037611 (XEN) d12v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:31:24.077534 (XEN) d12v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:31:24.101772 (XEN) d12v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 16:31:24.133743 [ 1600.356188] xen-blkback: backend/vbd/12/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 16:31:24.757613 [ 1600.410448] xen-blkback: backend/vbd/12/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 16:31:24.805657 (XEN) common/grant_table.c:1909:d12v3 Expanding d12 grant table from 1 to 2 frames Oct 3 16:31:24.865634 (XEN) common/grant_table.c:1909:d12v3 Expanding d12 grant table from 2 to 3 frames Oct 3 16:31:24.877610 [ 1600.523280] vif vif-12-0 vif12.0: Guest Rx ready Oct 3 16:31:24.913606 [ 1600.526644] IPv6: ADDRCONF(NETDEV_CHANGE): vif12.0: link becomes ready Oct 3 16:31:24.925647 [ 1600.534520] xenbr0: port 2(vif12.0) entered blocking state Oct 3 16:31:24.925647 [ 1600.538725] xenbr0: port 2(vif12.0) entered forwarding state Oct 3 16:31:24.937622 (XEN) common/grant_table.c:1909:d12v0 Expanding d12 grant table from 3 to 4 frames Oct 3 16:31:45.861693 [ 1649.878006] xenbr0: port 2(vif12.0) entered disabled state Oct 3 16:32:14.276812 [ 1649.980848] xenbr0: port 2(vif12.0) entered disabled state Oct 3 16:32:14.372788 [ 1649.985826] device vif12.0 left promiscuous mode Oct 3 16:32:14.384762 [ 1649.989672] xenbr0: port 2(vif12.0) entered disabled state Oct 3 16:32:14.384762 Oct 3 16:32:33.823223 (XEN) *** Serial input to Xen (type 'CTRL-x' three times to switch input) Oct 3 16:32:33.845754 Oct 3 16:32:33.846511 Oct 3 16:32:34.826713 (XEN) '0' pressed -> dumping Dom0's registers Oct 3 16:32:34.841794 (XEN) *** Dumping Dom0 vcpu#0 state: *** Oct 3 16:32:34.841854 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Oct 3 16:32:34.844224 Not tainted ]---- Oct 3 16:32:34.853716 (XEN) CPU: 0 Oct 3 16:32:34.853768 (XEN) PC: c031ce28 Oct 3 16:32:34.853812 (XEN) CPSR: 600f0093 MODE:32-bit Guest SVC Oct 3 16:32:34.853858 (XEN) R0: 00000005 R1: 00000000 R2: 00541a41 R3: c031ce20 Oct 3 16:32:34.865686 (XEN) R4: c1909d80 R5: c1b12200 R6: c1904d1c R7: c1904d78 Oct 3 16:32:34.865686 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c00 Oct 3 16:32:34.877658 (XEN) USR: SP: bef2f970 LR: b6e946c5 Oct 3 16:32:34.877658 (XEN) SVC: SP: c1901f40 LR: c0308df0 SPSR:600f0013 Oct 3 16:32:34.877658 (XEN) ABT: SP: c1b22b10 LR: c0300ea0 SPSR:60070193 Oct 3 16:32:34.889782 (XEN) UND: SP: c1b22b20 LR: c0300fa0 SPSR:60030093 Oct 3 16:32:34.889848 (XEN) IRQ: SP: c1b22b00 LR: c0300ba0 SPSR:600f0193 Oct 3 16:32:34.901674 (XEN) FIQ: SP: c1b22b30 LR: c1b22b30 SPSR:00000000 Oct 3 16:32:34.901674 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 16:32:34.901674 (XEN) Oct 3 16:32:34.913783 (XEN) SCTLR: 10c5387d Oct 3 16:32:34.913846 (XEN) TCR: 00000000 Oct 3 16:32:34.913890 (XEN) TTBR0: 00000000646c406a Oct 3 16:32:34.913933 (XEN) TTBR1: 000000006020406a Oct 3 16:32:34.913976 (XEN) IFAR: b6edfe78, IFSR: 00000007 Oct 3 16:32:34.925783 (XEN) DFAR: b6bcf000, DFSR: 0000081f Oct 3 16:32:34.925842 (XEN) Oct 3 16:32:34.925883 (XEN) VTCR_EL2: 80003558 Oct 3 16:32:34.925926 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 16:32:34.937785 (XEN) Oct 3 16:32:34.937839 (XEN) SCTLR_EL2: 30cd187f Oct 3 16:32:34.937885 (XEN) HCR_EL2: 007c663f Oct 3 16:32:34.937928 (XEN) TTBR0_EL2: 000000004110e000 Oct 3 16:32:34.937972 (XEN) Oct 3 16:32:34.938011 (XEN) ESR_EL2: 07e00000 Oct 3 16:32:34.949767 (XEN) HPFAR_EL2: 00104810 Oct 3 16:32:34.949824 (XEN) HDFAR: e0807f00 Oct 3 16:32:34.949868 (XEN) HIFAR: c042b7a4 Oct 3 16:32:34.949911 (XEN) Oct 3 16:32:34.949950 (XEN) Guest stack trace from sp=c1901f40: Oct 3 16:32:34.961780 (XEN) Failed to convert stack to physical address Oct 3 16:32:34.961870 (XEN) *** Dumping Dom0 vcpu#1 state: *** Oct 3 16:32:34.961919 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 16:32:34.973775 (XEN) CPU: 0 Oct 3 16:32:34.973829 (XEN) PC: c031ce28 Oct 3 16:32:34.973872 (XEN) CPSR: 60030093 MODE:32-bit Guest SVC Oct 3 16:32:34.973917 (XEN) R0: 00000005 R1: 00000000 R2: 00387119 R3: c031ce20 Oct 3 16:32:34.985757 (XEN) R4: c210e600 R5: c1b12200 R6: c1904d1c R7: c1904d78 Oct 3 16:32:34.985818 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c00 Oct 3 16:32:34.997748 (XEN) USR: SP: bec76118 LR: b6a4306d Oct 3 16:32:34.997806 (XEN) SVC: SP: e08c9f90 LR: c0308df0 SPSR:60030013 Oct 3 16:32:34.997852 (XEN) ABT: SP: c1b22b50 LR: c0300ea0 SPSR:600f0193 Oct 3 16:32:35.009700 (XEN) UND: SP: c1b22b60 LR: c0300fa0 SPSR:60030093 Oct 3 16:32:35.009733 (XEN) IRQ: SP: c1b22b40 LR: c0300ba0 SPSR:60030193 Oct 3 16:32:35.021743 (XEN) FIQ: SP: c1b22b70 LR: c1b22b70 SPSR:00000000 Oct 3 16:32:35.021802 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 16:32:35.033737 (XEN) Oct 3 16:32:35.033805 (XEN) SCTLR: 10c5387d Oct 3 16:32:35.033853 (XEN) TCR: 00000000 Oct 3 16:32:35.033912 (XEN) TTBR0: 0000000064bd006a Oct 3 16:32:35.033962 (XEN) TTBR1: 000000006020406a Oct 3 16:32:35.045699 (XEN) IFAR: b6e2f814, IFSR: 00000007 Oct 3 16:32:35.045752 (XEN) DFAR: 00599318, DFSR: 0000081f Oct 3 16:32:35.045797 (XEN) Oct 3 16:32:35.045836 (XEN) VTCR_EL2: 80003558 Oct 3 16:32:35.045878 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 16:32:35.057734 (XEN) Oct 3 16:32:35.057780 (XEN) SCTLR_EL2: 30cd187f Oct 3 16:32:35.057823 (XEN) HCR_EL2: 007c663f Oct 3 16:32:35.057865 (XEN) TTBR0_EL2: 000000004110e000 Oct 3 16:32:35.057908 (XEN) Oct 3 16:32:35.057946 (XEN) ESR_EL2: 07e00000 Oct 3 16:32:35.069731 (XEN) HPFAR_EL2: 00104810 Oct 3 16:32:35.069780 (XEN) HDFAR: e0807f00 Oct 3 16:32:35.069822 (XEN) HIFAR: c042b7a4 Oct 3 16:32:35.069870 (XEN) Oct 3 16:32:35.069921 (XEN) Guest stack trace from sp=e08c9f90: Oct 3 16:32:35.081696 (XEN) Failed to convert stack to physical address Oct 3 16:32:35.081750 Oct 3 16:32:36.795400 (XEN) 'H' pressed -> dumping heap info (now = 1677688566833) Oct 3 16:32:36.809654 (XEN) heap[node=0][zone=0] -> 16271 pages Oct 3 16:32:36.809684 (XEN) heap[node=0][zone=1] -> Oct 3 16:32:36.810901 0 pages Oct 3 16:32:36.821667 (XEN) heap[node=0][zone=2] -> 0 pages Oct 3 16:32:36.821697 (XEN) heap[node=0][zone=3] -> 0 pages Oct 3 16:32:36.821721 (XEN) heap[node=0][zone=4] -> 0 pages Oct 3 16:32:36.821744 (XEN) heap[node=0][zone=5] -> 0 pages Oct 3 16:32:36.833700 (XEN) heap[node=0][zone=6] -> 0 pages Oct 3 16:32:36.833732 (XEN) heap[node=0][zone=7] -> 0 pages Oct 3 16:32:36.833757 (XEN) heap[node=0][zone=8] -> 0 pages Oct 3 16:32:36.845703 (XEN) heap[node=0][zone=9] -> 0 pages Oct 3 16:32:36.845736 (XEN) heap[node=0][zone=10] -> 0 pages Oct 3 16:32:36.845761 (XEN) heap[node=0][zone=11] -> 0 pages Oct 3 16:32:36.845785 (XEN) heap[node=0][zone=12] -> 0 pages Oct 3 16:32:36.857692 (XEN) heap[node=0][zone=13] -> 0 pages Oct 3 16:32:36.857724 (XEN) heap[node=0][zone=14] -> 0 pages Oct 3 16:32:36.857748 (XEN) heap[node=0][zone=15] -> 0 pages Oct 3 16:32:36.869677 (XEN) heap[node=0][zone=16] -> 0 pages Oct 3 16:32:36.869709 (XEN) heap[node=0][zone=17] -> 0 pages Oct 3 16:32:36.869734 (XEN) heap[node=0][zone=18] -> 0 pages Oct 3 16:32:36.869758 (XEN) heap[node=0][zone=19] -> 130835 pages Oct 3 16:32:36.881694 (XEN) heap[node=0][zone=20] -> 241605 pages Oct 3 16:32:36.881726 (XEN) heap[node=0][zone=21] -> 0 pages Oct 3 16:32:36.881751 (XEN) heap[node=0][zone=22] -> 0 pages Oct 3 16:32:36.893682 (XEN) heap[node=0][zone=23] -> 0 pages Oct 3 16:32:36.893714 (XEN) heap[node=0][zone=24] -> 0 pages Oct 3 16:32:36.893739 (XEN) heap[node=0][zone=25] -> 0 pages Oct 3 16:32:36.905637 (XEN) heap[node=0][zone=26] -> 0 pages Oct 3 16:32:36.905666 (XEN) heap[node=0][zone=27] -> 0 pages Oct 3 16:32:36.905690 (XEN) heap[node=0][zone=28] -> 0 pages Oct 3 16:32:36.905713 Oct 3 16:32:38.790170 Oct 3 16:32:40.591595 Oct 3 16:32:40.810491 Oct 3 16:32:42.602346 Oct 3 16:32:42.837100 (XEN) Dumping timer queues: Oct 3 16:32:42.853823 (XEN) CPU00: Oct 3 16:32:42.853891 (XEN) ex= 6176us timer=43ff9070 cb=credit.c#csched_acct(43ff9008) Oct 3 16:32:42.853943 (XEN) ex= Oct 3 16:32:42.856260 271000us timer=43fdc968 cb=vtimer.c#virt_timer_expired(43fdc960) Oct 3 16:32:42.865733 (XEN) CPU01: Oct 3 16:32:42.865783 (XEN) ex= 27043us timer=43fee968 cb=vtimer.c#virt_timer_expired(43fee960) Oct 3 16:32:42.877610 Oct 3 16:32:44.825488 Oct 3 16:32:46.613405 Oct 3 16:32:46.831746 (XEN) 'd' pressed -> dumping registers Oct 3 16:32:46.849780 (XEN) Oct 3 16:32:46.849833 (XEN) *** Dumping CPU0 host state: *** Oct 3 16:32:46.849879 (XEN) ----[ Xen-4.20-unstable arm32 debug=y N Oct 3 16:32:46.851540 ot tainted ]---- Oct 3 16:32:46.861652 (XEN) CPU: 0 Oct 3 16:32:46.861681 (XEN) PC: 0025f53c domain.c#idle_loop+0x130/0x1ac Oct 3 16:32:46.861708 (XEN) CPSR: 6001005a MODE:Hypervisor Oct 3 16:32:46.861732 (XEN) R0: 00000000 R1: 00000001 R2: 00000000 R3: 00000000 Oct 3 16:32:46.873698 (XEN) R4: 00000000 R5: 003000e0 R6: 00331324 R7: 00000001 Oct 3 16:32:46.873732 (XEN) R8: 00331104 R9: 00000000 R10:40e00000 R11:4003ff54 R12:fffffffc Oct 3 16:32:46.885666 (XEN) HYP: SP: 4003ff44 LR: 00225b7c Oct 3 16:32:46.885698 (XEN) Oct 3 16:32:46.885720 (XEN) VTCR_EL2: 80003558 Oct 3 16:32:46.885743 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 16:32:46.897663 (XEN) Oct 3 16:32:46.897692 (XEN) SCTLR_EL2: 30cd187f Oct 3 16:32:46.897715 (XEN) HCR_EL2: 007c663f Oct 3 16:32:46.897738 (XEN) TTBR0_EL2: 000000004110e000 Oct 3 16:32:46.897762 (XEN) Oct 3 16:32:46.897783 (XEN) ESR_EL2: 07e00000 Oct 3 16:32:46.909656 (XEN) HPFAR_EL2: 00104810 Oct 3 16:32:46.909687 (XEN) HDFAR: e0807f00 Oct 3 16:32:46.909711 (XEN) HIFAR: c042b7a4 Oct 3 16:32:46.909734 (XEN) Oct 3 16:32:46.909754 (XEN) Xen stack trace from sp=4003ff44: Oct 3 16:32:46.921747 (XEN) 07e00000 00295014 002919b8 4003ff4c 002678fc 00000000 00000000 00000000 Oct 3 16:32:46.921810 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 16:32:46.933775 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 16:32:46.933838 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 16:32:46.945746 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 16:32:46.957761 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 16:32:46.957822 (XEN) Xen call trace: Oct 3 16:32:46.957865 (XEN) [<0025f53c>] domain.c#idle_loop+0x130/0x1ac (PC) Oct 3 16:32:46.969753 (XEN) [<00225b7c>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 16:32:46.969813 (XEN) [<002678fc>] arch_get_xen_caps+0/0x90 Oct 3 16:32:46.969859 (XEN) Oct 3 16:32:46.981837 (XEN) *** Dumping CPU1 host state: *** Oct 3 16:32:46.981883 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 16:32:46.981910 (XEN) CPU: 1 Oct 3 16:32:46.981956 (XEN) PC: 0025f53c domain.c#idle_loop+0x130/0x1ac Oct 3 16:32:46.993683 (XEN) CPSR: 600f005a MODE:Hypervisor Oct 3 16:32:46.993716 (XEN) R0: 00000000 R1: 00000001 R2: 3fd06000 R3: 00000000 Oct 3 16:32:47.005678 (XEN) R4: 00000001 R5: 003000e0 R6: 00331324 R7: 00000002 Oct 3 16:32:47.005713 (XEN) R8: 00331104 R9: 00000001 R10:40e00000 R11:4000ff54 R12:fffffffc Oct 3 16:32:47.017659 (XEN) HYP: SP: 4000ff44 LR: 00225b7c Oct 3 16:32:47.017691 (XEN) Oct 3 16:32:47.017713 (XEN) VTCR_EL2: 80003558 Oct 3 16:32:47.017736 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 16:32:47.017759 (XEN) Oct 3 16:32:47.017780 (XEN) SCTLR_EL2: 30cd187f Oct 3 16:32:47.029677 (XEN) HCR_EL2: 007c663f Oct 3 16:32:47.029708 (XEN) TTBR0_EL2: 00000000ba004000 Oct 3 16:32:47.029732 (XEN) Oct 3 16:32:47.029754 (XEN) ESR_EL2: 07e00000 Oct 3 16:32:47.029776 (XEN) HPFAR_EL2: 00104810 Oct 3 16:32:47.041656 (XEN) HDFAR: e0807f00 Oct 3 16:32:47.041686 (XEN) HIFAR: c09f6d20 Oct 3 16:32:47.041710 (XEN) Oct 3 16:32:47.041732 (XEN) Xen stack trace from sp=4000ff44: Oct 3 16:32:47.041756 (XEN) 07e00000 00301290 00000001 4000ff3c 002681e0 00000000 00000000 00000000 Oct 3 16:32:47.053763 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 16:32:47.065747 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 16:32:47.065809 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 16:32:47.077658 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 16:32:47.077692 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 16:32:47.089657 (XEN) Xen call trace: Oct 3 16:32:47.089687 (XEN) [<0025f53c>] domain.c#idle_loop+0x130/0x1ac (PC) Oct 3 16:32:47.089715 (XEN) [<00225b7c>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 16:32:47.101639 (XEN) [<002681e0>] start_secondary+0x204/0x20c Oct 3 16:32:47.101672 (XEN) Oct 3 16:32:47.101694 Oct 3 16:32:48.892311 (XEN) 'e' pressed -> dumping event-channel info Oct 3 16:32:48.908849 (XEN) Event channel information for domain 0: Oct 3 16:32:48.908880 (XEN) Polling vCPUs: {} Oct 3 16:32:48.908904 (XEN) port Oct 3 16:32:48.911242 [p/m/s] Oct 3 16:32:48.920851 (XEN) 1 [0/0/ - ]: s=3 n=1 x=0 d=0 p=4 Oct 3 16:32:48.920881 (XEN) 2 [0/0/ - ]: s=5 n=0 x=0 v=2 Oct 3 16:32:48.920905 (XEN) 3 [0/0/ - ]: s=5 n=1 x=0 v=3 Oct 3 16:32:48.932804 (XEN) 4 [0/0/ - ]: s=3 n=0 x=0 d=0 p=1 Oct 3 16:32:48.932832 (XEN) 5 [0/0/ - ]: s=3 n=1 x=0 d=0 p=6 Oct 3 16:32:48.932857 (XEN) 6 [0/0/ - ]: s=3 n=0 x=0 d=0 p=5 Oct 3 16:32:48.944771 Oct 3 16:32:50.857907 (XEN) gnttab_usage_print_all [ key 'g' pressed Oct 3 16:32:50.877829 (XEN) -------- active -------- -------- shared -------- Oct 3 16:32:50.877891 (XEN) [ref] localdo Oct 3 16:32:50.880152 m mfn pin localdom gmfn flags Oct 3 16:32:50.889724 (XEN) grant-table for remote d0 (v1) Oct 3 16:32:50.889778 (XEN) 2 frames (64 max), 5 maptrack frames (1024 max) Oct 3 16:32:50.901749 (XEN) [0x208] 0 0x64076 0x00000001 0 0x064076 0x19 Oct 3 16:32:50.901804 (XEN) [0x209] 0 0x64077 0x00000001 0 0x064077 0x19 Oct 3 16:32:50.901852 (XEN) gnttab_usage_print_all ] done Oct 3 16:32:50.913652 Oct 3 16:32:52.855277 Oct 3 16:32:54.626048 Oct 3 16:32:54.863757 (XEN) Physical memory information: Oct 3 16:32:54.890044 (XEN) Xen heap: 65084kB free Oct 3 16:32:54.890103 (XEN) heap[19]: 523340kB free Oct 3 16:32:54.890148 (XEN) heap[20]: 966420kB fr Oct 3 16:32:54.892541 ee Oct 3 16:32:54.901766 (XEN) Dom heap: 1489760kB free Oct 3 16:32:54.901830 Oct 3 16:32:56.874381 Oct 3 16:32:58.635580 Oct 3 16:32:58.877727 (XEN) sched_smt_power_savings: disabled Oct 3 16:32:58.901876 (XEN) NOW=1699780900958 Oct 3 16:32:58.901934 (XEN) Online Cpus: 0-1 Oct 3 16:32:58.901959 (XEN) Cpupool 0: Oct 3 16:32:58.902009 (XEN) Cpus: 0-1 Oct 3 16:32:58.902049 (XEN) Sche Oct 3 16:32:58.904117 duling granularity: cpu, 1 CPU per sched-resource Oct 3 16:32:58.913833 (XEN) Scheduler: SMP Credit Scheduler (credit) Oct 3 16:32:58.913914 (XEN) info: Oct 3 16:32:58.913938 (XEN) ncpus = 2 Oct 3 16:32:58.925869 (XEN) master = 0 Oct 3 16:32:58.925897 (XEN) credit = 600 Oct 3 16:32:58.925949 (XEN) credit balance = 299 Oct 3 16:32:58.925992 (XEN) weight = 0 Oct 3 16:32:58.926034 (XEN) runq_sort = 52166 Oct 3 16:32:58.937794 (XEN) default-weight = 256 Oct 3 16:32:58.937878 (XEN) tslice = 30ms Oct 3 16:32:58.937955 (XEN) ratelimit = 1000us Oct 3 16:32:58.938010 (XEN) credits per msec = 10 Oct 3 16:32:58.949886 (XEN) ticks per tslice = 3 Oct 3 16:32:58.949963 (XEN) migration delay = 0us Oct 3 16:32:58.950031 (XEN) idlers: 0 Oct 3 16:32:58.950054 (XEN) active units: Oct 3 16:32:58.950094 (XEN) CPUs info: Oct 3 16:32:58.961851 (XEN) CPU[00] current=d[IDLE]v0, curr=d[IDLE]v0, prev=NULL Oct 3 16:32:58.961952 (XEN) CPU[00] nr_run=1, sort=52159, sibling={0}, core={0-1} Oct 3 16:32:58.962040 (XEN) CPU[01] current=d[IDLE]v1, curr=d[IDLE]v1, prev=NULL Oct 3 16:32:58.973760 (XEN) CPU[01] nr_run=1, sort=52166, sibling={1}, core={0-1} Oct 3 16:32:58.973822 (XEN) 1: [0.0] pri=0 flags=0 cpu=1 credit=143 [w=256,cap=0] Oct 3 16:32:58.985697 Oct 3 16:33:00.878215 Oct 3 16:33:02.646840 Oct 3 16:33:02.889391 (XEN) Synced stime skew: max=42ns avg=42ns samples=1 current=42ns Oct 3 16:33:02.905774 (XEN) Synced cycles ske Oct 3 16:33:02.907442 w: max=0 avg=0 samples=1 current=0 Oct 3 16:33:02.917690 Oct 3 16:33:04.859455 Oct 3 16:33:06.656218 Oct 3 16:33:06.862314 Oct 3 16:33:08.662659 Oct 3 16:33:08.859186 Oct 3 16:33:10.669014 Oct 3 16:33:20.901826 (XEN) 'q' pressed -> dumping domain info (now = 1721801747708) Oct 3 16:33:20.925776 (XEN) General information for domain 0: Oct 3 16:33:20.925776 (XEN) refcnt=3 dying=0 paus Oct 3 16:33:20.927657 e_count=0 Oct 3 16:33:20.937702 (XEN) nr_pages=131072 xenheap_pages=3 dirty_cpus={} max_pages=131072 Oct 3 16:33:20.937738 (XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=00000020 Oct 3 16:33:20.949861 (XEN) p2m mappings for domain 0 (vmid 1): Oct 3 16:33:20.949894 (XEN) 1G mappings: 0 (shattered 0) Oct 3 16:33:20.949919 (XEN) 2M mappings: 233 (shattered 23) Oct 3 16:33:20.961765 (XEN) 4K mappings: 6810 Oct 3 16:33:20.961823 (XEN) Rangesets belonging to domain 0: Oct 3 16:33:20.961870 (XEN) Interrupts { 32-72, 74, 77-79, 82-84, 86, 88-100, 103-104, 107-110, 114, 116-120, 123, 126-128, 138, 144, 146-147, 149-151, 156 } Oct 3 16:33:20.973753 (XEN) I/O Memory { 2020-2050, 3810-3811, 3830-3831, 3860-3861, 10000-10001, 10010-10045, 10050-10055, 10060-10061, 101b0-101b1, 101d0-101d1, 101e0-101e1, 10440-10441, 10800-10801, 10830-10831, 10850-10851, 10a60-10a61, 10d10-10d11, 11000-11010, 11200-11201, 11210-11211, 11400-11401, 11800-11805, 11c00-11c01, 11c10-11c11, 11d40-11d41, 11f20-11f21, 12000-12010, 12100-12101, 12110-12111, 12120-12121, 12130-12131, 12170-12171, 121a0-121a1, 121b0-121b1, 121d0-121d1, 12200-12201, 12210-12211, 12220-12221, 12230-12231, 12250-12251, 122f0-122f1, 12c00-12c01, 12c10-12c11, 12c30-12c31, 12c60-12c61, 12c70-12c71, 12c80-12c81, 12c90-12c91, 12ca0-12ca1, 12cb0-12cb1, 12cc0-12cc1, 12cd0-12cd1, 12ce0-12ce1, 12d10-12d11, 12d20-12d21, 12d30-12d31, 12d40-12d41, 12d60-12d61, 12d70-12d71, 12dd0-12dd1, 13260-13261, 13270-13271, 13280-13281, 13290-13291, 132a0-132a1, 132b0-132b1, 132c0-132c1, 132d0-132d1, 132e0-132e1, 132f0-132f1, 13400-13401, 13c40-13c41, 13c50-13c51, 13e00-13e01, 13e10-13e11, 13e20-13e21, 13e30-13e31, 13e80-13e81, 13e90-13e91, 13ea0-13ea1, 13eb0-13eb1, 14400-14440, 14450-14460, 14500-14510, 14530-145a0, 145b0-145b1, 14640-14641, 14650-14651 } Oct 3 16:33:21.069820 (XEN) NODE affinity for domain 0: [0] Oct 3 16:33:21.081769 (XEN) VCPU information and callbacks for domain 0: Oct 3 16:33:21.081829 (XEN) UNIT0 affinities: hard={0-1} soft={0-1} Oct 3 16:33:21.081876 (XEN) VCPU0: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 16:33:21.093771 (XEN) pause_count=0 pause_flags=1 Oct 3 16:33:21.093828 (XEN) GICH_LRs (vcpu 0) mask=0 Oct 3 16:33:21.093873 (XEN) VCPU_LR[0]=0 Oct 3 16:33:21.105789 (XEN) VCPU_LR[1]=0 Oct 3 16:33:21.105844 (XEN) VCPU_LR[2]=0 Oct 3 16:33:21.105886 (XEN) VCPU_LR[3]=0 Oct 3 16:33:21.105927 (XEN) No periodic timer Oct 3 16:33:21.105969 (XEN) UNIT1 affinities: hard={0-1} soft={0-1} Oct 3 16:33:21.117707 (XEN) VCPU1: CPU0 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 16:33:21.117742 (XEN) pause_count=0 pause_flags=1 Oct 3 16:33:21.117767 (XEN) GICH_LRs (vcpu 1) mask=0 Oct 3 16:33:21.129788 (XEN) VCPU_LR[0]=0 Oct 3 16:33:21.129843 (XEN) VCPU_LR[1]=0 Oct 3 16:33:21.129902 (XEN) VCPU_LR[2]=0 Oct 3 16:33:21.129924 (XEN) VCPU_LR[3]=0 Oct 3 16:33:21.129946 (XEN) No periodic timer Oct 3 16:33:21.141738 (XEN) Notifying guest 0:0 (virq 1, port 0) Oct 3 16:33:21.141798 (XEN) Notifying guest 0:1 (virq 1, port 0) Oct 3 16:33:21.141845 Oct 3 16:33:32.878578 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 16:33:32.897687 Oct 3 16:33:32.897725 arndale-westfield login: Oct 3 16:33:32.899355 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 16:33:40.897636 [ 1815.497529] vif vif-1: 5 starting transaction Oct 3 16:34:59.885815 [ 1815.500586] vif vif-1: 5 starting transaction Oct 3 16:34:59.897675 [ 1820.570174] xenbus_probe_frontend: xenbus_frontend_dev_shutdown: device/vif/1 timeout closing device Oct 3 16:35:04.969833 [ 1820.578130] sd 0:0:0:0: [sda] Synchronizing SCSI cache Oct 3 16:35:04.969913 [ 1820.588574] wake enabled for irq 119 (gpx1-4) Oct 3 16:35:04.981912 [ 1820.591605] wake enabled for irq 120 (gpx1-5) Oct 3 16:35:04.981974 [ 1820.595991] wake enabled for irq 121 (gpx1-6) Oct 3 16:35:04.993727 [ 1820.600445] wake enabled for irq 122 (gpx1-7) Oct 3 16:35:04.993789 [ 1820.604845] wake enabled for irq 123 (gpx2-0) Oct 3 16:35:04.993836 [ 1820.609271] wake enabled for irq 124 (gpx2-1) Oct 3 16:35:05.005681 [ 1820.614133] reboot: Resô Oct 3 16:35:05.341744 Oct 3 16:35:05.341767 Oct 3 16:35:05.341842 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 16:35:05.341895 Oct 3 16:35:05.341934 CPU: Exynos5250@1000MHz Oct 3 16:35:05.341978 Oct 3 16:35:05.342016 Board: Arndale Oct 3 16:35:05.353731 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 16:35:05.353794 ready Oct 3 16:35:05.353834 DRAM: 2 GiB Oct 3 16:35:05.353875 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 16:35:05.377682 trace: enabled Oct 3 16:35:05.413650 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 16:35:05.773632 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 16:35:05.821718 In: serial Oct 3 16:35:05.833718 Out: serial Oct 3 16:35:05.833748 Err: serial Oct 3 16:35:05.833771 SCSI: ARNDALE SCSI INIT Oct 3 16:35:05.833793 Target spinup took 0 ms. Oct 3 16:35:05.833816 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 16:35:05.845700 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 16:35:05.845733 Net: Net Initialization Skipped Oct 3 16:35:05.857664 No ethernet found. Oct 3 16:35:05.857696 Hostname: arndale-westfield Oct 3 16:35:05.857721 Hit any key to stop autoboot: 2  1  0 Oct 3 16:35:07.777761 (Re)start USB... Oct 3 16:35:07.777838 USB0: USB EHCI 1.00 Oct 3 16:35:07.789734 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 16:35:13.381769 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 16:35:13.393640 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 16:35:13.837704 Waiting for Ethernet connection... done. Oct 3 16:35:15.481695 BOOTP broadcast 1 Oct 3 16:35:15.481739 BOOTP broadcast 2 Oct 3 16:35:16.993758 DHCP client bound to address 10.149.64.45 (1580 ms) Oct 3 16:35:17.009698 Using asx0 device Oct 3 16:35:17.009721 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 16:35:17.009776 Filename 'pxelinux.0'. Oct 3 16:35:17.009819 Load address: 0x43e00000 Oct 3 16:35:17.009861 Loading: *### Oct 3 16:35:17.033684 2.7 MiB/s Oct 3 16:35:17.033715 done Oct 3 16:35:17.033737 Bytes transferred = 42430 (a5be hex) Oct 3 16:35:17.033760 missing environment variable: pxeuuid Oct 3 16:35:17.033784 Retrieving file: pxelinux.cfg/0A95402D Oct 3 16:35:17.045757 Using asx0 device Oct 3 16:35:17.045814 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 16:35:17.045864 Filename 'pxelinux.cfg/0A95402D'. Oct 3 16:35:17.045925 Load address: 0x51000000 Oct 3 16:35:17.057739 Loading: *# Oct 3 16:35:17.057794 355.5 KiB/s Oct 3 16:35:17.057836 done Oct 3 16:35:17.057875 Bytes transferred = 728 (2d8 hex) Oct 3 16:35:17.057918 Config file found Oct 3 16:35:17.057958 Ignoring unknown command: serial Oct 3 16:35:17.058001 1: ^Overwrite Oct 3 16:35:17.069711 Retrieving file: /osstest/tmp//arndale-westfield--initrd.gz Oct 3 16:35:17.069767 Using asx0 device Oct 3 16:35:17.069808 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 16:35:17.081758 Filename '/osstest/tmp//arndale-westfield--initrd.gz'. Oct 3 16:35:17.081781 Load address: 0x43300000 Oct 3 16:35:17.081823 Loading: *################################################################# Oct 3 16:35:17.393715 ################################################################# Oct 3 16:35:17.705605 ################################################################# Oct 3 16:35:18.029650 ################################################################# Oct 3 16:35:18.320814 ################################################################# Oct 3 16:35:18.636878 ################################################################# Oct 3 16:35:18.928753 ################################################################# Oct 3 16:35:19.232887 ################################################################# Oct 3 16:35:19.556746 ################################################################# Oct 3 16:35:19.868931 ################################################################# Oct 3 16:35:20.177702 ################################################################# Oct 3 16:35:20.453690 ################################################################# Oct 3 16:35:20.765548 ################################################################# Oct 3 16:35:21.092808 ################################################################# Oct 3 16:35:21.408784 ################################################################# Oct 3 16:35:21.729656 ################################################################# Oct 3 16:35:22.044816 ################################################################# Oct 3 16:35:22.357098 ################################################################# Oct 3 16:35:22.680966 ################################################################# Oct 3 16:35:23.008977 ################################################################# Oct 3 16:35:23.320813 ################################################################# Oct 3 16:35:23.617523 ################################################################# Oct 3 16:35:23.929656 ################################################################# Oct 3 16:35:24.241618 ################################################################# Oct 3 16:35:24.541911 ################################################################# Oct 3 16:35:24.841772 ################################################################# Oct 3 16:35:25.141730 ################################################################# Oct 3 16:35:25.441796 ######################################## Oct 3 16:35:25.621681 2.8 MiB/s Oct 3 16:35:25.621732 done Oct 3 16:35:25.633659 Bytes transferred = 26339177 (191e769 hex) Oct 3 16:35:25.633692 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/linux Oct 3 16:35:25.645693 Using asx0 device Oct 3 16:35:25.645723 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 16:35:25.645750 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/linux'. Oct 3 16:35:25.657694 Load address: 0x42000000 Oct 3 16:35:25.657725 Loading: *################################################################# Oct 3 16:35:25.969644 ################################################################# Oct 3 16:35:26.293611 ################################################################# Oct 3 16:35:26.617699 ################################################################# Oct 3 16:35:26.953649 ################################################################# Oct 3 16:35:27.277691 ############################################# Oct 3 16:35:27.505659 2.7 MiB/s Oct 3 16:35:27.505694 done Oct 3 16:35:27.505716 Bytes transferred = 5427712 (52d200 hex) Oct 3 16:35:27.505742 append: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=59532 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 16:35:27.553733 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb Oct 3 16:35:27.565730 Using asx0 device Oct 3 16:35:27.565760 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 16:35:27.565787 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb'. Oct 3 16:35:27.577681 Load address: 0x43000000 Oct 3 16:35:27.577711 Loading: *#### Oct 3 16:35:27.601656 2.5 MiB/s Oct 3 16:35:27.601686 done Oct 3 16:35:27.601708 Bytes transferred = 46686 (b65e hex) Oct 3 16:35:27.601736 Kernel image @ 0x42000000 [ 0x000000 - 0x52d200 ] Oct 3 16:35:27.601762 ## Flattened Device Tree blob at 43000000 Oct 3 16:35:27.613727 Booting using the fdt blob at 0x43000000 Oct 3 16:35:27.613760 Loading Ramdisk to 4e6e1000, end 4ffff769 ... OK Oct 3 16:35:28.036657 Loading Device Tree to 4e6d2000, end 4e6e065d ... OK Oct 3 16:35:28.036657 Oct 3 16:35:28.048663 Starting kernel ...(fake run for tracing) Oct 3 16:35:28.048663 Oct 3 16:35:28.048663 Oct 3 16:35:28.060887 Starting kernel ... Oct 3 16:35:28.060942 Oct 3 16:35:28.060964 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 16:35:34.169762 [ 0.000000] Linux version 6.1.0-25-armmp (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.106-3 (2024-08-26) Oct 3 16:35:34.181763 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 16:35:34.193729 [ 0.000000] CPU: div instructions available: patching division code Oct 3 16:35:34.193826 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 16:35:34.205762 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 16:35:34.217700 [ 0.000000] Memory policy: Data cache writealloc Oct 3 16:35:34.217733 [ 0.000000] efi: UEFI not found. Oct 3 16:35:34.217733 [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 Oct 3 16:35:34.229750 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 16:35:34.229750 [ 0.000000] Zone ranges: Oct 3 16:35:34.229826 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 16:35:34.241734 [ 0.000000] Normal empty Oct 3 16:35:34.241811 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 16:35:34.241866 [ 0.000000] Movable zone start for each node Oct 3 16:35:34.253749 [ 0.000000] Early memory node ranges Oct 3 16:35:34.253805 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 16:35:34.265724 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 16:35:34.265846 [ 0.000000] percpu: Embedded 18 pages/cpu s44692 r8192 d20844 u73728 Oct 3 16:35:34.277734 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 16:35:34.277809 [ 0.000000] Kernel command line: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=59532 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 16:35:34.325817 [ 0.000000] Unknown kernel command line parameters "preseed --- vga=normal auto=true hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=59532 domain=test-lab.xenproject.org", will be passed to user space. Oct 3 16:35:34.361802 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 16:35:34.373733 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 16:35:34.373821 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 16:35:34.385738 [ 0.000000] Memory: 2015968K/2097152K available (11264K kernel code, 1696K rwdata, 3724K rodata, 2048K init, 376K bss, 64800K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 16:35:34.397794 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 16:35:34.409736 [ 0.000000] ftrace: allocating 39612 entries in 117 pages Oct 3 16:35:34.409806 [ 0.000000] ftrace: allocated 117 pages with 5 groups Oct 3 16:35:34.421734 [ 0.000000] trace event string verifier disabled Oct 3 16:35:34.421734 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 16:35:34.421807 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 16:35:34.433764 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 16:35:34.433827 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 16:35:34.445724 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 16:35:34.445790 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 16:35:34.457726 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 16:35:34.457800 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 16:35:34.469734 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 16:35:34.469818 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 16:35:34.481752 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 16:35:34.481816 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 16:35:34.493731 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 16:35:34.505734 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 16:35:34.505816 [ 0.002632] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 16:35:34.517729 [ 0.002646] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 16:35:34.529753 [ 0.002661] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 16:35:34.529830 [ 0.002672] Ignoring duplicate/late registration of read_current_timer delay Oct 3 16:35:34.541729 [ 0.003025] Console: colour dummy device 80x30 Oct 3 16:35:34.541744 [ 0.003065] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 16:35:34.553729 [ 0.003078] CPU: Testing write buffer coherency: ok Oct 3 16:35:34.565757 [ 0.003122] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 16:35:34.565839 [ 0.003129] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 16:35:34.577760 [ 0.003136] pid_max: default: 32768 minimum: 301 Oct 3 16:35:34.577843 [ 0.003496] LSM: Security Framework initializing Oct 3 16:35:34.589748 [ 0.003569] landlock: Up and running. Oct 3 16:35:34.589833 [ 0.003574] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 16:35:34.601760 [ 0.003759] AppArmor: AppArmor initialized Oct 3 16:35:34.601760 [ 0.003772] TOMOYO Linux initialized Oct 3 16:35:34.601845 [ 0.003817] LSM support for eBPF active Oct 3 16:35:34.613759 [ 0.004062] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 16:35:34.613844 [ 0.004076] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 16:35:34.625746 [ 0.005508] /cpus/cpu@0 missing clock-frequency property Oct 3 16:35:34.625826 [ 0.005537] /cpus/cpu@1 missing clock-frequency property Oct 3 16:35:34.637754 [ 0.005551] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 16:35:34.637837 [ 0.006513] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 16:35:34.649718 [ 0.006519] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 16:35:34.649759 [ 0.006623] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 16:35:34.661759 [ 0.006629] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 16:35:34.661840 [ 0.006775] Setting up static identity map for 0x40300000 - 0x403000ac Oct 3 16:35:34.673767 [ 0.007933] rcu: Hierarchical SRCU implementation. Oct 3 16:35:34.673852 [ 0.007939] rcu: Max phase no-delay instances is 1000. Oct 3 16:35:34.685747 [ 0.010054] EFI services will not be available. Oct 3 16:35:34.685747 [ 0.010405] smp: Bringing up secondary CPUs ... Oct 3 16:35:34.685843 [ 0.011152] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 16:35:34.697760 [ 0.011163] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 16:35:34.709755 [ 0.011296] smp: Brought up 1 node, 2 CPUs Oct 3 16:35:34.709755 [ 0.011306] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 16:35:34.721744 [ 0.011313] CPU: All CPU(s) started in HYP mode. Oct 3 16:35:34.721828 [ 0.011317] CPU: Virtualization extensions available. Oct 3 16:35:34.721828 [ 0.011941] devtmpfs: initialized Oct 3 16:35:34.733765 [ 0.023305] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 16:35:34.733855 [ 0.023538] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 16:35:34.745780 [ 0.023563] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 16:35:34.757761 [ 0.024087] pinctrl core: initialized pinctrl subsystem Oct 3 16:35:34.757848 [ 0.024786] DMI not present or invalid. Oct 3 16:35:34.757848 [ 0.025462] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 16:35:34.769787 [ 0.030854] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 16:35:34.769881 [ 0.032399] audit: initializing netlink subsys (disabled) Oct 3 16:35:34.781768 [ 0.032600] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 Oct 3 16:35:34.793756 [ 0.033759] thermal_sys: Registered thermal governor 'fair_share' Oct 3 16:35:34.793756 [ 0.033767] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 16:35:34.805817 [ 0.033772] thermal_sys: Registered thermal governor 'step_wise' Oct 3 16:35:34.805894 [ 0.033777] thermal_sys: Registered thermal governor 'user_space' Oct 3 16:35:34.817765 [ 0.033781] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 16:35:34.817765 [ 0.034159] No ATAGs? Oct 3 16:35:34.817853 [ 0.034228] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 16:35:34.829758 [ 0.034237] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 16:35:34.829853 [ 0.035321] Serial: AMBA PL011 UART driver Oct 3 16:35:34.841750 [ 0.084796] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 16:35:34.841836 [ 0.091838] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 16:35:34.853755 [ 0.102836] iommu: Default domain type: Translated Oct 3 16:35:34.865753 [ 0.102844] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 16:35:34.865753 [ 0.103811] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 16:35:34.877732 [ 0.104348] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 16:35:34.877768 [ 0.104360] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 16:35:34.877846 [ 0.104895] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 16:35:34.889754 [ 0.104926] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 16:35:34.901756 [ 0.105108] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 16:35:34.901836 [ 0.105462] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 16:35:34.913760 [ 0.105473] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 16:35:34.913837 [ 0.105868] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 16:35:34.925761 [ 0.106154] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 16:35:34.925844 [ 0.106164] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 16:35:34.937759 [ 0.106443] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 16:35:34.937759 [ 0.106543] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 16:35:34.937841 [ 0.106552] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 16:35:34.949757 [ 0.106752] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 16:35:34.949848 [ 0.106950] pps_core: LinuxPPS API ver. 1 registered Oct 3 16:35:34.961763 [ 0.106955] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 16:35:34.973760 [ 0.106970] PTP clock support registered Oct 3 16:35:34.973760 [ 0.108620] NetLabel: Initializing Oct 3 16:35:34.973852 [ 0.108625] NetLabel: domain hash size = 128 Oct 3 16:35:34.985762 [ 0.108632] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 16:35:34.985762 [ 0.108687] NetLabel: unlabeled traffic allowed by default Oct 3 16:35:34.985846 [ 0.108869] vgaarb: loaded Oct 3 16:35:34.997770 [ 0.109526] clocksource: Switched to clocksource mct-frc Oct 3 16:35:34.997862 [ 0.178341] VFS: Disk quotas dquot_6.6.0 Oct 3 16:35:34.997880 [ 0.178442] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 16:35:35.009750 [ 0.179185] AppArmor: AppArmor Filesystem Enabled Oct 3 16:35:35.009831 [ 0.188344] NET: Registered PF_INET protocol family Oct 3 16:35:35.021749 [ 0.188552] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 16:35:35.021829 [ 0.190180] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 16:35:35.033760 [ 0.190272] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 16:35:35.063273 [ 0.190295] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 16:35:35.063373 [ 0.190389] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 16:35:35.063496 [ 0.190617] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 16:35:35.069837 [ 0.190837] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 16:35:35.069908 [ 0.190921] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 16:35:35.081848 [ 0.190960] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 16:35:35.081915 [ 0.191160] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 16:35:35.093847 [ 0.191195] NET: Registered PF_XDP protocol family Oct 3 16:35:35.093910 [ 0.191205] PCI: CLS 0 bytes, default 64 Oct 3 16:35:35.093958 [ 0.191734] Trying to unpack rootfs image as initramfs... Oct 3 16:35:35.105920 [ 0.192138] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 16:35:35.117858 [ 0.192344] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 16:35:35.117930 [ 0.193965] Initialise system trusted keyrings Oct 3 16:35:35.129829 [ 0.194028] Key type blacklist registered Oct 3 16:35:35.129890 [ 0.194282] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 16:35:35.141868 [ 0.201451] zbud: loaded Oct 3 16:35:35.141928 [ 0.202719] integrity: Platform Keyring initialized Oct 3 16:35:35.141978 [ 0.202787] integrity: Machine keyring initialized Oct 3 16:35:35.153840 [ 0.202794] Key type asymmetric registered Oct 3 16:35:35.153902 [ 0.202804] Asymmetric key parser 'x509' registered Oct 3 16:35:35.153952 [ 1.559701] Freeing initrd memory: 25724K Oct 3 16:35:35.165925 [ 1.571384] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 16:35:35.165987 [ 1.571671] bounce: pool size: 64 pages Oct 3 16:35:35.166035 [ 1.571833] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 16:35:35.177807 [ 1.572000] io scheduler mq-deadline registered Oct 3 16:35:35.177867 [ 1.577141] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 16:35:35.189780 [ 1.597851] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 16:35:35.201849 [ 1.597864] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 16:35:35.201923 [ 1.600154] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 16:35:35.213853 [ 1.600164] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 16:35:35.225946 [ 1.600975] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 16:35:35.226015 [ 1.600985] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 16:35:35.237860 [ 1.601882] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 16:35:35.249920 [ 1.601891] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 16:35:35.261837 [ 1.604203] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 16:35:35.261912 [ 1.607042] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 16:35:35.273867 [ 1.609815] Serial: AMBA driver Oct 3 16:35:35.273926 [ 1.610065] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 16:35:35.285869 [ 1.610560] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 16:35:35.297849 [ 1.611014] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 16:35:35.297921 [ 2.749118] printk: console [ttySAC2] enabled Oct 3 16:35:35.309844 [ 2.753956] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 16:35:35.321791 [ 2.764582] STM32 USART driver initialized Oct 3 16:35:35.321853 [ 2.778688] mousedev: PS/2 mouse device common for all mice Oct 3 16:35:35.333819 [ 2.809961] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 16:35:35.369832 [ 2.818562] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T16:35:37 UTC (1727973337) Oct 3 16:35:35.381822 [ 2.828443] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 16:35:35.381885 [ 2.835915] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 16:35:35.393842 [ 2.843882] NET: Registered PF_INET6 protocol family Oct 3 16:35:35.405784 [ 2.857452] Segment Routing with IPv6 Oct 3 16:35:35.417853 [ 2.859741] In-situ OAM (IOAM) with IPv6 Oct 3 16:35:35.417922 [ 2.863640] mip6: Mobile IPv6 Oct 3 16:35:35.417968 [ 2.866547] NET: Registered PF_PACKET protocol family Oct 3 16:35:35.429845 [ 2.871703] mpls_gso: MPLS GSO support Oct 3 16:35:35.429905 [ 2.875883] ThumbEE CPU extension supported. Oct 3 16:35:35.429952 [ 2.879571] Registering SWP/SWPB emulation handler Oct 3 16:35:35.441830 [ 2.884795] registered taskstats version 1 Oct 3 16:35:35.441890 [ 2.888443] Loading compiled-in X.509 certificates Oct 3 16:35:35.441939 [ 3.348753] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 16:35:35.909869 [ 3.356103] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 16:35:35.921849 [ 3.367141] zswap: loaded using pool lzo/zbud Oct 3 16:35:35.921910 [ 3.371142] Key type .fscrypt registered Oct 3 16:35:35.933838 [ 3.374430] Key type fscrypt-provisioning registered Oct 3 16:35:35.933934 [ 3.388200] Key type encrypted registered Oct 3 16:35:35.945829 [ 3.390790] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 16:35:35.945891 [ 3.396249] ima: No TPM chip found, activating TPM-bypass! Oct 3 16:35:35.957873 [ 3.401711] ima: Allocated hash algorithm: sha256 Oct 3 16:35:35.957935 [ 3.406431] ima: No architecture policies found Oct 3 16:35:35.969801 [ 3.410943] evm: Initialising EVM extended attributes: Oct 3 16:35:35.969859 [ 3.416016] evm: security.selinux Oct 3 16:35:35.969904 [ 3.419306] evm: security.SMACK64 (disabled) Oct 3 16:35:35.981850 [ 3.423555] evm: security.SMACK64EXEC (disabled) Oct 3 16:35:35.981911 [ 3.428155] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 16:35:35.981960 [ 3.433189] evm: security.SMACK64MMAP (disabled) Oct 3 16:35:35.993845 [ 3.437790] evm: security.apparmor Oct 3 16:35:35.993903 [ 3.441161] evm: security.ima Oct 3 16:35:35.993948 [ 3.444127] evm: security.capability Oct 3 16:35:36.005785 [ 3.447691] evm: HMAC attrs: 0x1 Oct 3 16:35:36.005844 [ 4.035388] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 16:35:36.593860 [ 4.041362] clk: Disabling unused clocks Oct 3 16:35:36.593923 [ 4.055037] Freeing unused kernel image (initmem) memory: 2048K Oct 3 16:35:36.617858 [ 4.059918] Checked W+X mappings: passed, no W+X pages found Oct 3 16:35:36.617921 [ 4.065161] Run /init as init process Oct 3 16:35:36.617967 [ 4.681472] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 16:35:37.241904 [ 4.705479] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 16:35:37.265733 [ 4.750437] usbcore: registered new interface driver usbfs Oct 3 16:35:37.313962 [ 4.758464] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 16:35:37.314029 [ 4.783187] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 16:35:37.337764 [ 4.789708] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 16:35:37.349749 [ 4.799171] usbcore: registered new interface driver hub Oct 3 16:35:37.361816 [ 4.808920] usbcore: registered new device driver usb Oct 3 16:35:37.361872 [ 4.816757] phy phy-12130000.phy.1: phy_power_on was called before phy_init Oct 3 16:35:37.373888 [ 4.826016] phy phy-12130000.phy.1: phy_power_on was called before phy_init Oct 3 16:35:37.385949 [ 4.868581] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 16:35:37.421756 [ 4.870713] exynos-ohci 12120000.usb: USB Host Controller Oct 3 16:35:37.433768 [ 4.883222] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Oct 3 16:35:37.445823 [ 4.894247] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Oct 3 16:35:37.457800 [ 4.902476] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Oct 3 16:35:37.457863 [ 4.917929] usb3503 usb-hub: switched to HUB mode Oct 3 16:35:37.469802 [ 4.921179] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 16:35:37.481838 [ 4.927464] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Oct 3 16:35:37.481902 [ 4.970028] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 16:35:37.529777 [ 4.971247] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 16:35:37.541783 [ 4.982841] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 16:35:37.541852 [ 4.990042] usb usb2: Product: USB Host Controller Oct 3 16:35:37.553807 [ 4.994810] usb usb2: Manufacturer: Linux 6.1.0-25-armmp ohci_hcd Oct 3 16:35:37.553872 [ 5.000884] usb usb2: SerialNumber: 12120000.usb Oct 3 16:35:37.553920 [ 5.020236] hub 2-0:1.0: USB hub found Oct 3 16:35:37.577804 [ 5.023470] hub 2-0:1.0: 3 ports detected Oct 3 16:35:37.577863 [ 5.037189] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 16:35:37.601819 [ 5.044042] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 16:35:37.601887 [ 5.051235] usb usb1: Product: EHCI Host Controller Oct 3 16:35:37.613755 [ 5.056078] usb usb1: Manufacturer: Linux 6.1.0-25-armmp ehci_hcd Oct 3 16:35:37.613818 [ 5.062160] usb usb1: SerialNumber: 12110000.usb Oct 3 16:35:37.625769 [ 5.068299] hub 1-0:1.0: USB hub found Oct 3 16:35:37.625828 [ 5.070848] hub 1-0:1.0: 3 ports detected Oct 3 16:35:37.625875 [ 5.135658] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 16:35:37.697830 [ 5.139733] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 16:35:37.697900 [ 5.147846] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 16:35:37.709847 [ 5.156762] xhci-hcd xhci-hcd.2.auto: irq 108, io mem 0x12000000 Oct 3 16:35:37.721840 [ 5.162924] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 16:35:37.721904 [ 5.168180] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 16:35:37.733833 [ 5.175817] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 16:35:37.733897 [ 5.182479] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 16:35:37.745778 [ 5.190575] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 16:35:37.745847 [ 5.197787] usb usb3: Product: xHCI Host Controller Oct 3 16:35:37.757780 [ 5.202633] usb usb3: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 16:35:37.757844 [ 5.208713] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 16:35:37.769739 [ 5.216961] hub 3-0:1.0: USB hub found Oct 3 16:35:37.769835 [ 5.219383] hub 3-0:1.0: 1 port detected Oct 3 16:35:37.781749 [ 5.224264] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 16:35:37.781819 [ 5.231440] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 16:35:37.793775 [ 5.239518] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 16:35:37.805766 [ 5.246721] usb usb4: Product: xHCI Host Controller Oct 3 16:35:37.805827 [ 5.251569] usb usb4: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 16:35:37.805877 [ 5.257649] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 16:35:37.817762 [ 5.263187] hub 4-0:1.0: USB hub found Oct 3 16:35:37.817820 [ 5.266278] hub 4-0:1.0: 1 port detected Oct 3 16:35:37.829709 [ 5.345593] usb 1-3: new high-speed USB device number 2 using exynos-ehci Oct 3 16:35:37.901638 Starting system log daemon: syslogd, klogd. Oct 3 16:35:37.985652 /var/run/utmp: No such file or directory Oct 3 16:35:39.825744 [?1h=(B   Oct 3 16:35:39.873673  Oct 3 16:35:39.873673 [  (-*) ][ Oct 03 16:35 ] Oct 3 16:35:39.885674 [  (0*start) ][ Oct 03 16:35 ] Oct 3 16:35:39.897673 [  (0*start) ][ Oct 03 16:35 ] Oct 3 16:35:39.921669 [  (0*start) ][ Oct 03 16:35 ] Oct 3 16:35:39.933701 [  (0*start) ][ Oct 03 16:35 ]                        [  (0*start) ][ Oct 03 16:35 ][  (0*start) ][ Oct 03 16:35 ] Oct 3 16:35:39.981805 [ 0- start  (2*shell) ][ Oct 03 16:35 ] Oct 3 16:35:40.005813 [ 0- start  (2*shell) ][ Oct 03 16:35 ] Oct 3 16:35:40.017777 [ 0- start  (2*shell) ][ Oct 03 16:35 ] Oct 3 16:35:40.029783 [ 0- start  (2*shell) ][ Oct 03 16:35 ]                        [ 0- start  (2*shell) ][ Oct 03 16:35 ][ 0- start  (2*shell) ][ Oct 03 16:35 ] Oct 3 16:35:40.089786 [ 0 start 2- shell  (3*shell) ][ Oct 03 16:35 ] Oct 3 16:35:40.101807 [ 0 start 2- shell  (3*shell) ][ Oct 03 16:35 ] Oct 3 16:35:40.113765 [ 0 start 2- shell  (3*shell) ][ Oct 03 16:35 ] Oct 3 16:35:40.125789 [ 0 start 2- shell  (3*shell) ][ Oct 03 16:35 ]                        [ 0 start 2- shell  (3*shell) ][ Oct 03 16:35 ][ 0 start 2- shell  (3*shell) ][ Oct 03 16:35 ] Oct 3 16:35:40.185782 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 16:35 ] Oct 3 16:35:40.197775 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 16:35 ] Oct 3 16:35:40.209812 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 16:35 ] Oct 3 16:35:40.221772 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 16:35 ]                        [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 16:35 ][ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 16:35 ] Oct 3 16:35:40.281684 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 16:35 ] Oct 3 16:35:40.293724 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 16:35 ] Oct 3 16:35:40.305711 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 16:35 ] Oct 3 16:35:40.317787 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 16:35 ]                        [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 16:35 ][ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 16:35 ] Oct 3 16:35:40.377785 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 16:35 ] Oct 3 16:35:40.389789 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 16:35 ] Oct 3 16:35:40.401751 [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 16:35 ] Oct 3 16:35:40.857722 Detecting network hardware ... 2%... 95%... 100% Oct 3 16:35:42.621737 Detecting link on eth0; please wait... ... 0%... 10%... 20% Oct 3 16:35:47.517744 Waiting for link-local address... ... 8%... 16%... 25%... 33%... 41%... 50%... 100% Oct 3 16:35:49.317697 Attempting IPv6 autoconfiguration... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 75%... 83%... 91%... 100% Oct 3 16:35:55.389690 Configuring the network with DHCP ... 0%... 100%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 16:36 ] Oct 3 16:35:58.549636 Checking the Debian archive mirror ... 25%... 50%... 75%... 100% Oct 3 16:36:06.709569 Loading additional components ... 0%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Oct 3 16:36:40.201680 Setting up the clock ... 0%... 100% Oct 3 16:36:42.949739 Loading additional components ... 50%... 100% Oct 3 16:36:44.609702 Detecting disks and all other hardware ... 2%... 95%... 100% Oct 3 16:36:49.217687 Loading additional components ... 12%... 25%... 37%... 50%... 62%... 75%... 87%... 100% Oct 3 16:36:56.249633 Loading additional components ... 25%... 50%... 75%... 100% Oct 3 16:36:58.637718 Starting up the partitioner [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 16:37 ]... 4%... 13%... 21%... 30%... 43%... 52%... 60%... 73%... 82%... 91%... 100% Oct 3 16:37:11.713702 Guided partitioning ... 16%... 33%... 50%... 66%... 83%... 100% Oct 3 16:37:19.845731 Starting up the partitioner ... 4%... 12%... 20%... 32%... 40%... 52%... 60%... 72%... 80%... 92%... 100% Oct 3 16:37:30.800786 Partitions formatting ... 33% Oct 3 16:37:39.577697 Partitions formatting Partitions formatting Installing the base system ... 0%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 16:38 ]... 17%... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 16:39 ]... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 16:40 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 16:41 ]... 48%... 50%...  Oct 3 16:41:36.713732  60%... 70%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 16:42 ]... 79%... 83%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 16:43 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 16:44 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 16:45 ]... 91%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 16:46 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 16:47 ]... 100% Oct 3 16:47:14.685695 Configuring apt ... 7%... 14%... 14%... 21%... 35%... 42%... 50%... 61%... 70%. Oct 3 16:47:51.585698 ... 82%... 92%... 100% Oct 3 16:47:54.177711 Select and install software ... 1%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 16:48 ]... 10%... 13%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 16:49 ]... 20%... 30%... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 16:50 ]... 50%... Oct 3 16:50:44.229825 . 60%... 70%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 16:51 ]... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 16:52 ]... 88%... 90%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 16:53 ]... 94%... 100% Oct 3 16:53:56.736790 [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 16:54 ] Finishing the installation ... 4%... 12%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 16:55 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 16:56 ]... 16%... 20%... 32%... 40%... 44%... Oct 3 16:56:07.773684  52%... 60%... 72%... 80%... 92% The system is going down NOW! Sent SIGKILL to all processes Oct 3 16:56:19.201893 Requesting system reboot Oct 3 16:56:19.201977 [ 1247.689155] reboot: Reó Oct 3 16:56:20.570030 Oct 3 16:56:20.570051 Oct 3 16:56:20.570142 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 16:56:20.570198 Oct 3 16:56:20.570236 CPU: Exynos5250@1000MHz Oct 3 16:56:20.570280 Oct 3 16:56:20.570318 Board: Arndale Oct 3 16:56:20.570363 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 16:56:20.581773 ready Oct 3 16:56:20.581841 DRAM: 2 GiB Oct 3 16:56:20.581895 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 16:56:20.593793 trace: enabled Oct 3 16:56:20.629735 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 16:56:20.989833 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 16:56:21.049827 In: serial Oct 3 16:56:21.049900 Out: serial Oct 3 16:56:21.049960 Err: serial Oct 3 16:56:21.061798 SCSI: ARNDALE SCSI INIT Oct 3 16:56:21.061874 Target spinup took 0 ms. Oct 3 16:56:21.061933 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 16:56:21.073804 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 16:56:21.073885 Net: Net Initialization Skipped Oct 3 16:56:21.073950 No ethernet found. Oct 3 16:56:21.074010 Hostname: arndale-westfield Oct 3 16:56:21.085770 Hit any key to stop autoboot: 2  1  0 Oct 3 16:56:23.005702 (Re)start USB... Oct 3 16:56:23.005741 USB0: USB EHCI 1.00 Oct 3 16:56:23.005765 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 16:56:28.613758 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 16:56:28.614138 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 16:56:29.057598 Waiting for Ethernet connection... done. Oct 3 16:56:30.753712 BOOTP broadcast 1 Oct 3 16:56:30.753745 BOOTP broadcast 2 Oct 3 16:56:32.469638 DHCP client bound to address 10.149.64.45 (1789 ms) Oct 3 16:56:32.481642 Using asx0 device Oct 3 16:56:32.481673 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 16:56:32.481700 Filename 'pxelinux.0'. Oct 3 16:56:32.493620 Load address: 0x43e00000 Oct 3 16:56:32.493652 Loading: *### Oct 3 16:56:32.505632 2.4 MiB/s Oct 3 16:56:32.505663 done Oct 3 16:56:32.505685 Bytes transferred = 42430 (a5be hex) Oct 3 16:56:32.505710 missing environment variable: pxeuuid Oct 3 16:56:32.517668 Retrieving file: pxelinux.cfg/0A95402D Oct 3 16:56:32.517701 Using asx0 device Oct 3 16:56:32.517745 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 16:56:32.529671 Filename 'pxelinux.cfg/0A95402D'. Oct 3 16:56:32.529704 Load address: 0x51000000 Oct 3 16:56:32.529727 Loading: *# Oct 3 16:56:32.529749 31.3 KiB/s Oct 3 16:56:32.529771 done Oct 3 16:56:32.529791 Bytes transferred = 65 (41 hex) Oct 3 16:56:32.541615 Config file found Oct 3 16:56:32.541645 Ignoring unknown command: serial Oct 3 16:56:32.541669 1: local Oct 3 16:56:32.541691 scanning bus for devices... Oct 3 16:56:32.541714 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 16:56:32.553666 Type: Hard Disk Oct 3 16:56:32.553697 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 16:56:32.565657 Found 1 device(s). Oct 3 16:56:32.565687 Oct 3 16:56:32.565708 SCSI device 0: Oct 3 16:56:32.565730 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 16:56:32.577646 Type: Hard Disk Oct 3 16:56:32.577674 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 16:56:32.577701 ... is now current device Oct 3 16:56:32.577724 Scanning scsi 0... Oct 3 16:56:32.589624 Found U-Boot script /boot.scr Oct 3 16:56:32.697619 639 bytes read in 42 ms (14.6 KiB/s) Oct 3 16:56:32.745660 ## Executing script at 50000000 Oct 3 16:56:32.745688 Loading dtbs/exynos5250-arndale.dtb Oct 3 16:56:32.745712 46686 bytes read in 1799 ms (24.4 KiB/s) Oct 3 16:56:34.497742 Loading vmlinuz-6.1.0-25-armmp-lpae Oct 3 16:56:34.497791 5509632 bytes read in 186 ms (28.2 MiB/s) Oct 3 16:56:34.701637 Loading initrd.img-6.1.0-25-armmp-lpae Oct 3 16:56:34.713619 25732032 bytes read in 2880 ms (8.5 MiB/s) Oct 3 16:56:37.497803 Booting Oct 3 16:56:37.497842 Kernel image @ 0x42000000 [ 0x000000 - 0x541200 ] Oct 3 16:56:37.497868 ## Flattened Device Tree blob at 43000000 Oct 3 16:56:37.497892 Booting using the fdt blob at 0x43000000 Oct 3 16:56:37.509746 Loading Ramdisk to 4e775000, end 4ffff3c0 ... OK Oct 3 16:56:37.917610 Loading Device Tree to 4e766000, end 4e77465d ... OK Oct 3 16:56:37.929632 Oct 3 16:56:37.929660 Starting kernel ...(fake run for tracing) Oct 3 16:56:37.941624 Oct 3 16:56:37.941652 Oct 3 16:56:37.941673 Starting kernel ... Oct 3 16:56:37.941695 Oct 3 16:56:37.941716 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 16:56:44.101779 [ 0.000000] Linux version 6.1.0-25-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.106-3 (2024-08-26) Oct 3 16:56:44.113759 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=30c5387d Oct 3 16:56:44.125706 [ 0.000000] CPU: div instructions available: patching division code Oct 3 16:56:44.125737 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 16:56:44.137772 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 16:56:44.137807 [ 0.000000] Memory policy: Data cache writealloc Oct 3 16:56:44.149749 [ 0.000000] efi: UEFI not found. Oct 3 16:56:44.149778 [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000 Oct 3 16:56:44.149804 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 16:56:44.161753 [ 0.000000] Zone ranges: Oct 3 16:56:44.161780 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 16:56:44.173750 [ 0.000000] Normal empty Oct 3 16:56:44.173777 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 16:56:44.173804 [ 0.000000] Movable zone start for each node Oct 3 16:56:44.185719 [ 0.000000] Early memory node ranges Oct 3 16:56:44.185750 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 16:56:44.185780 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 16:56:44.197755 [ 0.000000] percpu: Embedded 18 pages/cpu s44820 r8192 d20716 u73728 Oct 3 16:56:44.209751 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 16:56:44.209807 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=ttySAC2,115200n8 Oct 3 16:56:44.221758 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 16:56:44.233767 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 16:56:44.233800 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 16:56:44.245749 [ 0.000000] Memory: 2015504K/2097152K available (12288K kernel code, 1717K rwdata, 3748K rodata, 2048K init, 383K bss, 65264K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 16:56:44.257761 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 16:56:44.269745 [ 0.000000] ftrace: allocating 39996 entries in 118 pages Oct 3 16:56:44.269774 [ 0.000000] ftrace: allocated 118 pages with 5 groups Oct 3 16:56:44.281750 [ 0.000000] trace event string verifier disabled Oct 3 16:56:44.281778 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 16:56:44.281804 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 16:56:44.293778 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 16:56:44.293811 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 16:56:44.305729 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 16:56:44.305767 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 16:56:44.317757 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 16:56:44.317787 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 16:56:44.329749 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 16:56:44.329780 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 16:56:44.341753 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 16:56:44.341784 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 16:56:44.353752 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 16:56:44.365718 [ 0.000019] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 16:56:44.365751 [ 0.002622] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 16:56:44.377778 [ 0.002636] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 16:56:44.389814 [ 0.002651] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 16:56:44.389856 [ 0.002663] Ignoring duplicate/late registration of read_current_timer delay Oct 3 16:56:44.401678 [ 0.003032] Console: colour dummy device 80x30 Oct 3 16:56:44.401710 [ 0.003075] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 16:56:44.413681 [ 0.003089] CPU: Testing write buffer coherency: ok Oct 3 16:56:44.425715 [ 0.003132] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 16:56:44.425720 [ 0.003139] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 16:56:44.437800 [ 0.003146] pid_max: default: 32768 minimum: 301 Oct 3 16:56:44.437851 [ 0.003514] LSM: Security Framework initializing Oct 3 16:56:44.449676 [ 0.003586] landlock: Up and running. Oct 3 16:56:44.449702 [ 0.003591] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 16:56:44.461676 [ 0.003777] AppArmor: AppArmor initialized Oct 3 16:56:44.461701 [ 0.003790] TOMOYO Linux initialized Oct 3 16:56:44.461726 [ 0.003835] LSM support for eBPF active Oct 3 16:56:44.461750 [ 0.004083] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 16:56:44.473677 [ 0.004097] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 16:56:44.485657 [ 0.005514] /cpus/cpu@0 missing clock-frequency property Oct 3 16:56:44.485692 [ 0.005542] /cpus/cpu@1 missing clock-frequency property Oct 3 16:56:44.497670 [ 0.005556] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 16:56:44.497701 [ 0.006513] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 16:56:44.509672 [ 0.006519] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 16:56:44.509704 [ 0.006621] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 16:56:44.521674 [ 0.006626] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 16:56:44.521708 [ 0.006768] Setting up static identity map for 0x40400000 - 0x404000ac Oct 3 16:56:44.533677 [ 0.007934] rcu: Hierarchical SRCU implementation. Oct 3 16:56:44.533702 [ 0.007940] rcu: Max phase no-delay instances is 1000. Oct 3 16:56:44.545648 [ 0.010071] EFI services will not be available. Oct 3 16:56:44.545671 [ 0.010415] smp: Bringing up secondary CPUs ... Oct 3 16:56:44.545696 [ 0.011156] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 16:56:44.557673 [ 0.011168] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 16:56:44.569670 [ 0.011299] smp: Brought up 1 node, 2 CPUs Oct 3 16:56:44.569703 [ 0.011307] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 16:56:44.581674 [ 0.011315] CPU: All CPU(s) started in HYP mode. Oct 3 16:56:44.581698 [ 0.011319] CPU: Virtualization extensions available. Oct 3 16:56:44.581724 [ 0.012172] devtmpfs: initialized Oct 3 16:56:44.593674 [ 0.023177] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 16:56:44.593702 [ 0.023406] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 16:56:44.605731 [ 0.023430] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 16:56:44.617674 [ 0.023995] pinctrl core: initialized pinctrl subsystem Oct 3 16:56:44.617703 [ 0.024721] DMI not present or invalid. Oct 3 16:56:44.617728 [ 0.025397] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 16:56:44.629675 [ 0.026951] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 16:56:44.629706 [ 0.028477] audit: initializing netlink subsys (disabled) Oct 3 16:56:44.641664 [ 0.028679] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 Oct 3 16:56:44.653678 [ 0.029856] thermal_sys: Registered thermal governor 'fair_share' Oct 3 16:56:44.653707 [ 0.029863] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 16:56:44.665684 [ 0.029868] thermal_sys: Registered thermal governor 'step_wise' Oct 3 16:56:44.665719 [ 0.029872] thermal_sys: Registered thermal governor 'user_space' Oct 3 16:56:44.677668 [ 0.029877] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 16:56:44.677701 [ 0.030078] No ATAGs? Oct 3 16:56:44.677725 [ 0.030145] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 16:56:44.689675 [ 0.030153] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 16:56:44.689709 [ 0.031234] Serial: AMBA PL011 UART driver Oct 3 16:56:44.701681 [ 0.080496] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 16:56:44.701726 [ 0.087443] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 16:56:44.713684 [ 0.091859] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages Oct 3 16:56:44.725679 [ 0.091867] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page Oct 3 16:56:44.725709 [ 0.099647] iommu: Default domain type: Translated Oct 3 16:56:44.737673 [ 0.099655] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 16:56:44.737708 [ 0.100609] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 16:56:44.749671 [ 0.101127] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 16:56:44.749720 [ 0.101137] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 16:56:44.761664 [ 0.101670] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 16:56:44.761704 [ 0.101700] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 16:56:44.773686 [ 0.101926] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 16:56:44.773718 [ 0.102416] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 16:56:44.785678 [ 0.102426] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 16:56:44.785704 [ 0.102805] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 16:56:44.797669 [ 0.103097] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 16:56:44.797703 [ 0.103107] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 16:56:44.809669 [ 0.103444] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 16:56:44.809702 [ 0.103546] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 16:56:44.821671 [ 0.103555] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 16:56:44.821706 [ 0.103735] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 16:56:44.821732 [ 0.103954] pps_core: LinuxPPS API ver. 1 registered Oct 3 16:56:44.833672 [ 0.103959] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 16:56:44.845667 [ 0.103976] PTP clock support registered Oct 3 16:56:44.845700 [ 0.105495] NetLabel: Initializing Oct 3 16:56:44.845724 [ 0.105501] NetLabel: domain hash size = 128 Oct 3 16:56:44.857672 [ 0.105506] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 16:56:44.857707 [ 0.105560] NetLabel: unlabeled traffic allowed by default Oct 3 16:56:44.869680 [ 0.105728] vgaarb: loaded Oct 3 16:56:44.869700 [ 0.106689] clocksource: Switched to clocksource mct-frc Oct 3 16:56:44.869727 [ 0.107298] VFS: Disk quotas dquot_6.6.0 Oct 3 16:56:44.881674 [ 0.107385] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 16:56:44.881710 [ 0.108173] AppArmor: AppArmor Filesystem Enabled Oct 3 16:56:44.881736 [ 0.118029] NET: Registered PF_INET protocol family Oct 3 16:56:44.893674 [ 0.118231] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 16:56:44.893706 [ 0.119891] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 16:56:44.905684 [ 0.119991] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 16:56:44.917677 [ 0.120015] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 16:56:44.917714 [ 0.120113] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 16:56:44.929673 [ 0.120344] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 16:56:44.941671 [ 0.120582] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 16:56:44.941703 [ 0.120676] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 16:56:44.953671 [ 0.120716] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 16:56:44.953707 [ 0.120949] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 16:56:44.965674 [ 0.120984] NET: Registered PF_XDP protocol family Oct 3 16:56:44.965708 [ 0.120996] PCI: CLS 0 bytes, default 64 Oct 3 16:56:44.977674 [ 0.121509] Trying to unpack rootfs image as initramfs... Oct 3 16:56:44.977704 [ 0.121840] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 16:56:44.989684 [ 0.127232] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 16:56:44.989722 [ 0.192675] Initialise system trusted keyrings Oct 3 16:56:45.001644 [ 0.192797] Key type blacklist registered Oct 3 16:56:45.001736 [ 0.194056] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 16:56:45.013676 [ 0.201935] zbud: loaded Oct 3 16:56:45.013715 [ 0.204788] integrity: Platform Keyring initialized Oct 3 16:56:45.013743 [ 0.204823] integrity: Machine keyring initialized Oct 3 16:56:45.025739 [ 0.204832] Key type asymmetric registered Oct 3 16:56:45.025739 [ 0.204840] Asymmetric key parser 'x509' registered Oct 3 16:56:45.025739 [ 1.417099] Freeing initrd memory: 25132K Oct 3 16:56:45.037676 [ 1.439135] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 16:56:45.037704 [ 1.439400] bounce: pool size: 64 pages Oct 3 16:56:45.037729 [ 1.439597] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 16:56:45.049681 [ 1.439757] io scheduler mq-deadline registered Oct 3 16:56:45.049713 [ 1.444857] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 16:56:45.061757 [ 1.465816] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 16:56:45.073681 [ 1.465827] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 16:56:45.085675 [ 1.468161] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 16:56:45.085703 [ 1.468173] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 16:56:45.097677 [ 1.468968] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 16:56:45.109632 [ 1.468977] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 16:56:45.109665 [ 1.469795] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 16:56:45.121695 [ 1.469804] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 16:56:45.133674 [ 1.472184] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 16:56:45.133710 [ 1.475034] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 16:56:45.145674 [ 1.477756] Serial: AMBA driver Oct 3 16:56:45.145704 [ 1.477982] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 16:56:45.157682 [ 1.478456] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 16:56:45.169674 [ 1.478975] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 16:56:45.169708 [ 2.559702] printk: console [ttySAC2] enabled Oct 3 16:56:45.181713 [ 2.564515] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 16:56:45.193626 [ 2.575192] STM32 USART driver initialized Oct 3 16:56:45.193657 [ 2.589580] mousedev: PS/2 mouse device common for all mice Oct 3 16:56:45.205608 [ 2.620881] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 16:56:45.241646 [ 2.629505] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T16:50:45 UTC (1727974245) Oct 3 16:56:45.253664 [ 2.639363] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 16:56:45.265655 [ 2.646848] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 16:56:45.265688 [ 2.654830] NET: Registered PF_INET6 protocol family Oct 3 16:56:45.277617 [ 2.679062] Segment Routing with IPv6 Oct 3 16:56:45.301675 [ 2.681302] In-situ OAM (IOAM) with IPv6 Oct 3 16:56:45.301696 [ 2.685286] mip6: Mobile IPv6 Oct 3 16:56:45.301721 [ 2.688167] NET: Registered PF_PACKET protocol family Oct 3 16:56:45.313677 [ 2.693307] mpls_gso: MPLS GSO support Oct 3 16:56:45.313699 [ 2.697346] ThumbEE CPU extension supported. Oct 3 16:56:45.313725 [ 2.701155] Registering SWP/SWPB emulation handler Oct 3 16:56:45.325668 [ 2.706408] registered taskstats version 1 Oct 3 16:56:45.325691 [ 2.710048] Loading compiled-in X.509 certificates Oct 3 16:56:45.325717 [ 3.170580] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 16:56:45.793691 [ 3.177923] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 16:56:45.805694 [ 3.189000] zswap: loaded using pool lzo/zbud Oct 3 16:56:45.805728 [ 3.192909] Key type .fscrypt registered Oct 3 16:56:45.817671 [ 3.196256] Key type fscrypt-provisioning registered Oct 3 16:56:45.817679 [ 3.220524] Key type encrypted registered Oct 3 16:56:45.841671 [ 3.223124] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 16:56:45.841701 [ 3.228611] ima: No TPM chip found, activating TPM-bypass! Oct 3 16:56:45.853675 [ 3.234053] ima: Allocated hash algorithm: sha256 Oct 3 16:56:45.853702 [ 3.238765] ima: No architecture policies found Oct 3 16:56:45.853727 [ 3.243275] evm: Initialising EVM extended attributes: Oct 3 16:56:45.865679 [ 3.248347] evm: security.selinux Oct 3 16:56:45.865711 [ 3.251634] evm: security.SMACK64 (disabled) Oct 3 16:56:45.865736 [ 3.255890] evm: security.SMACK64EXEC (disabled) Oct 3 16:56:45.877833 [ 3.260491] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 16:56:45.877840 [ 3.265523] evm: security.SMACK64MMAP (disabled) Oct 3 16:56:45.889753 [ 3.270125] evm: security.apparmor Oct 3 16:56:45.889753 [ 3.273509] evm: security.ima Oct 3 16:56:45.889753 [ 3.276459] evm: security.capability Oct 3 16:56:45.901618 [ 3.280025] evm: HMAC attrs: 0x1 Oct 3 16:56:45.901643 [ 3.867567] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 16:56:46.489656 [ 3.873513] clk: Disabling unused clocks Oct 3 16:56:46.489689 [ 3.886388] Freeing unused kernel image (initmem) memory: 2048K Oct 3 16:56:46.501636 [ 3.891267] Checked W+X mappings: passed, no W+X pages found Oct 3 16:56:46.513703 [ 3.896513] Run /init as init process Oct 3 16:56:46.513710 Loading, please wait... Oct 3 16:56:46.549612 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 16:56:46.621638 [ 4.820751] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 16:56:47.437850 [ 4.836910] usbcore: registered new interface driver usbfs Oct 3 16:56:47.449738 [ 4.841116] usbcore: registered new interface driver hub Oct 3 16:56:47.461767 [ 4.841642] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 16:56:47.461838 [ 4.854597] usbcore: registered new device driver usb Oct 3 16:56:47.473720 [ 4.870316] phy phy-12130000.phy.2: phy_power_on was called before phy_init Oct 3 16:56:47.485749 [ 4.883171] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 16:56:47.497711 [ 4.891866] Synopsys Designware Multimedia Card Interface Driver Oct 3 16:56:47.509775 [ 4.894905] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Oct 3 16:56:47.521670 [ 4.922056] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 16:56:47.545744 [ 4.934522] phy phy-12130000.phy.2: phy_power_on was called before phy_init Oct 3 16:56:47.557869 [ 4.940516] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 16:56:47.557920 [ 4.941527] SCSI subsystem initialized Oct 3 16:56:47.557945 [ 4.947346] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 16:56:47.569751 [ 4.962410] exynos-ohci 12120000.usb: USB Host Controller Oct 3 16:56:47.581761 [ 4.967275] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 16:56:47.581826 [ 4.972796] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 16:56:47.593749 [ 4.981591] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Oct 3 16:56:47.605696 [ 4.992166] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 16:56:47.605729 [ 4.993999] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo Oct 3 16:56:47.617663 [ 5.001826] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 16:56:47.629662 [ 5.005849] mmc_host mmc0: card is polling. Oct 3 16:56:47.629694 [ 5.011689] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 16:56:47.629751 [ 5.021535] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Oct 3 16:56:47.641655 [ 5.021615] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Oct 3 16:56:47.641689 [ 5.039663] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 16:56:47.665627 [ 5.052264] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 16:56:47.665662 [ 5.071048] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 109,32 bit host data width,128 deep fifo Oct 3 16:56:47.689789 [ 5.079502] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 16:56:47.701776 [ 5.087371] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 16:56:47.701848 [ 5.094587] usb usb1: Product: EHCI Host Controller Oct 3 16:56:47.713768 [ 5.094837] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 16:56:47.725660 [ 5.099409] usb usb1: Manufacturer: Linux 6.1.0-25-armmp-lpae ehci_hcd Oct 3 16:56:47.725726 [ 5.115376] usb usb1: SerialNumber: 12110000.usb Oct 3 16:56:47.737734 [ 5.122573] hub 1-0:1.0: USB hub found Oct 3 16:56:47.737799 [ 5.124958] hub 1-0:1.0: 3 ports detected Oct 3 16:56:47.737846 [ 5.134903] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 16:56:47.749766 [ 5.141758] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 16:56:47.761769 [ 5.148932] usb usb2: Product: USB Host Controller Oct 3 16:56:47.761828 [ 5.153709] usb usb2: Manufacturer: Linux 6.1.0-25-armmp-lpae ohci_hcd Oct 3 16:56:47.773749 [ 5.160233] usb usb2: SerialNumber: 12120000.usb Oct 3 16:56:47.773809 [ 5.181869] hub 2-0:1.0: USB hub found Oct 3 16:56:47.797703 [ 5.201693] hub 2-0:1.0: 3 ports detected Oct 3 16:56:47.821688 [ 5.218657] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 16:56:47.833763 [ 5.233427] mmc0: new DDR MMC card at address 0001 Oct 3 16:56:47.845714 [ 5.246110] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Oct 3 16:56:47.857720 [ 5.254027] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 16:56:47.869756 [ 5.267257] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 16:56:47.881696 [ 5.273218] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 16:56:47.893773 [ 5.276304] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 16:56:47.905742 [ 5.290408] mmcblk0: p1 p2 p3 p4 Oct 3 16:56:47.905799 [ 5.301980] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Oct 3 16:56:47.917697 [ 5.309823] mmc1: new high speed SDHC card at address aaaa Oct 3 16:56:47.929692 [ 5.314098] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 16:56:47.929760 [ 5.320941] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Oct 3 16:56:47.941800 [ 5.329766] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 16:56:47.953721 [ 5.350519] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Oct 3 16:56:47.965719 [ 5.375769] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Oct 3 16:56:47.989719 [ 5.397720] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (241:0) Oct 3 16:56:48.013764 [ 5.407567] scsi host0: ahci-dwc Oct 3 16:56:48.025721 [ 5.422462] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 110 Oct 3 16:56:48.037717 [ 5.656575] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 16:56:48.277618 [ 5.730003] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 16:56:48.349741 [ 5.838444] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 16:56:48.457692 [ 5.910756] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 16:56:48.529783 [ 5.916371] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 16:56:48.529850 [ 5.922172] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 16:56:48.541738 [ 5.929680] ata1.00: configured for UDMA/133 Oct 3 16:56:48.541793 [ 5.934050] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 16:56:48.553752 [ 5.947758] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 16:56:48.565760 [ 5.988700] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 16:56:48.601744 [ 5.992765] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 16:56:48.613756 [ 6.004230] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 16:56:48.625768 [ 6.012251] xhci-hcd xhci-hcd.2.auto: irq 111, io mem 0x12000000 Oct 3 16:56:48.625840 [ 6.018560] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 16:56:48.637759 [ 6.023677] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 16:56:48.649719 [ 6.031313] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 16:56:48.649779 [ 6.038842] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 16:56:48.661820 [ 6.046041] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 16:56:48.661911 [ 6.053256] usb usb3: Product: xHCI Host Controller Oct 3 16:56:48.673775 [ 6.058103] usb usb3: Manufacturer: Linux 6.1.0-25-armmp-lpae xhci-hcd Oct 3 16:56:48.673859 [ 6.064604] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 16:56:48.685763 [ 6.064656] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 16:56:48.685839 [ 6.071259] hub 3-0:1.0: USB hub found Oct 3 16:56:48.697765 [ 6.082838] hub 3-0:1.0: 1 port detected Oct 3 16:56:48.697839 [ 6.087811] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 16:56:48.709780 [ 6.094672] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 16:56:48.709855 [ 6.102722] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 16:56:48.721762 [ 6.109930] usb usb4: Product: xHCI Host Controller Oct 3 16:56:48.721817 [ 6.114794] usb usb4: Manufacturer: Linux 6.1.0-25-armmp-lpae xhci-hcd Oct 3 16:56:48.733657 [ 6.121306] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 16:56:48.733699 [ 6.127534] hub 4-0:1.0: USB hub found Oct 3 16:56:48.745759 [ 6.129900] hub 4-0:1.0: 1 port detected Oct 3 16:56:48.745839 [ 6.139988] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 16:56:48.757792 [ 6.146060] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 16:56:48.769682 [ 6.155794] sd 0:0:0:0: [sda] Write Protect is off Oct 3 16:56:48.769738 [ 6.161765] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 16:56:48.781734 [ 6.169509] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 16:56:48.793693 [ 6.178854] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 16:56:48.793760 [ 6.196826] sda: sda1 sda2 < sda5 > Oct 3 16:56:48.805779 [ 6.201266] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 16:56:48.817714 [ 6.287551] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 16:56:48.913691 [ 6.395546] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 16:56:49.021635 [ 6.503513] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 16:56:49.129708 [ 6.611620] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 16:56:49.237675 [ 7.020094] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 16:56:49.645718 [ 7.127695] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 16:56:49.741766 [ 7.178715] random: crng init done Oct 3 16:56:49.789713 [ 7.287775] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. Oct 3 16:56:49.909795 [ 7.298631] device-mapper: uevent: version 1.0.3 Oct 3 16:56:49.909855 [ 7.303366] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Oct 3 16:56:49.921703 [ 7.735809] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 16:56:50.353779 Begin: Loading essential drivers ... done. Oct 3 16:56:50.581772 Begin: Running /scripts/init-premount ... done. Oct 3 16:56:53.600943 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 16:56:53.600943 Begin: Running /scripts/local-premount ... done. Oct 3 16:56:53.672818 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 16:56:53.720923 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 16:56:53.816925 /dev/mapper/arndale--westfield--vg-root: clean, 39343/1220608 files, 378270/4882432 blocks Oct 3 16:56:54.033329 done. Oct 3 16:56:54.044897 [ 11.545136] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 16:56:54.164980 [ 11.737021] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 16:56:54.356944 done. Oct 3 16:56:54.356944 Begin: Running /scripts/local-bottom ... done. Oct 3 16:56:54.404922 Begin: Running /scripts/init-bottom ... done. Oct 3 16:56:54.452839 [ 12.026943] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. Oct 3 16:56:54.644942 INIT: version 3.06 booting Oct 3 16:56:54.924896 INIT: No inittab.d directory found Oct 3 16:56:55.020880 Using makefile-style concurrent boot in runlevel S. Oct 3 16:56:55.308918 Starting hotplug events dispatcher: systemd-udevd. Oct 3 16:56:56.817997 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 16:56:57.045938 Synthesizing the initial hotplug events (devices)...done. Oct 3 16:56:57.657953 Waiting for /dev to be fully populated...[ 15.183760] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Oct 3 16:56:57.801972 [ 15.198099] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 16:56:57.813965 [ 15.331023] panfrost 11800000.gpu: clock rate = 533000000 Oct 3 16:56:57.945864 [ 15.356786] sd 0:0:0:0: Attached scsi generic sg0 type 0 Oct 3 16:56:57.981968 [ 15.366656] panfrost 11800000.gpu: mali-t600 id 0x600 major 0x0 minor 0x0 status 0x1 Oct 3 16:56:57.993985 [ 15.372962] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,31b4dfff Oct 3 16:56:57.994054 [ 15.381129] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 Oct 3 16:56:58.006003 [ 15.392831] panfrost 11800000.gpu: shader_present=0xf l2_present=0x1 Oct 3 16:56:58.017949 [ 15.420711] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 0 Oct 3 16:56:58.041883 [ 15.523356] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 16:56:58.149856 [ 15.591328] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 16:56:58.209836 [ 15.599739] usb3503 usb-hub: switched to HUB mode Oct 3 16:56:58.221805 [ 15.604374] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 16:56:58.221805 [ 15.710428] blk_print_req_error: 6 callbacks suppressed Oct 3 16:56:58.329832 [ 15.710441] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 16:56:58.341769 [ 15.823636] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 16:56:58.449771 [ 15.926775] usb 1-3: new high-speed USB device number 2 using exynos-ehci Oct 3 16:56:58.545873 [ 15.933632] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 16:56:58.557742 [ 16.041829] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 16:56:58.665785 [ 16.103470] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Oct 3 16:56:58.725822 [ 16.110359] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 3 16:56:58.737799 [ 16.121652] hub 1-3:1.0: USB hub found Oct 3 16:56:58.737799 [ 16.126104] hub 1-3:1.0: 3 ports detected Oct 3 16:56:58.749748 [ 16.149959] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 16:56:58.773794 [ 16.258035] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 16:56:58.881936 [ 16.303090] OF: graph: no port node found in /soc/hdmi@14530000 Oct 3 16:56:58.917789 [ 16.366164] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 16:56:58.989807 [ 16.422786] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 16:56:59.049750 [ 16.474279] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 16:56:59.097803 [ 16.540552] usb 1-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=77.32 Oct 3 16:56:59.157803 [ 16.547608] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Oct 3 16:56:59.169810 [ 16.554812] usb 1-3.2: Product: USB2.0 Hub Oct 3 16:56:59.169810 [ 16.567875] hub 1-3.2:1.0: USB hub found Oct 3 16:56:59.181776 [ 16.572911] hub 1-3.2:1.0: 4 ports detected Oct 3 16:56:59.193776 [ 16.874873] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 16:56:59.493798 [ 16.884926] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 16:56:59.505941 [ 16.992944] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 16:56:59.613741 [ 17.003313] usb 1-3.2.4: New USB device found, idVendor=0b95, idProduct=772a, bcdDevice= 0.01 Oct 3 16:56:59.625812 [ 17.010640] usb 1-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Oct 3 16:56:59.637741 [ 17.018253] usb 1-3.2.4: Product: AX88772 Oct 3 16:56:59.637741 [ 17.022061] usb 1-3.2.4: Manufacturer: ASIX Elec. Corp. Oct 3 16:56:59.637741 [ 17.027318] usb 1-3.2.4: SerialNumber: 000001 Oct 3 16:56:59.649762 [ 17.503841] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 16:57:00.129630 [ 17.602747] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 16:57:00.225594 [ 18.181352] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 16:57:00.801837 [ 18.196901] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Oct 3 16:57:00.825779 [ 18.208712] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 5a:03:d9:de:d6:c6 Oct 3 16:57:00.837721 [ 18.227078] usbcore: registered new interface driver asix Oct 3 16:57:00.849714 done. Oct 3 16:57:01.101703 [ 18.974452] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 16:57:01.593810 Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). Oct 3 16:57:01.629756 Checking file systems.../dev/sda1: clean, 922/61056 files, 25402/243968 blocks Oct 3 16:57:02.857736 done. Oct 3 16:57:02.893744 Cleaning up temporary files... /tmp. Oct 3 16:57:03.133752 [ 20.698986] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 16:57:03.325723 [ 20.747691] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 16:57:03.373826 [ 20.944120] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k FS Oct 3 16:57:03.565963 Mounting local filesystems...done. Oct 3 16:57:04.021906 Activating swapfile swap, if any...done. Oct 3 16:57:04.021964 Cleaning up temporary files.... Oct 3 16:57:04.061878 Starting Setting kernel variables: sysctl. Oct 3 16:57:04.193741 [ 22.691654] audit: type=1400 audit(1727974265.168:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=895 comm="apparmor_parser" Oct 3 16:57:05.321843 [ 22.707934] audit: type=1400 audit(1727974265.172:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=895 comm="apparmor_parser" Oct 3 16:57:05.333714 [ 22.747060] audit: type=1400 audit(1727974265.224:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=894 comm="apparmor_parser" Oct 3 16:57:05.381726 [ 22.923021] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 16:57:05.549703 [ 23.094858] audit: type=1400 audit(1727974265.572:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=937 comm="apparmor_parser" Oct 3 16:57:05.729747 [ 23.114192] audit: type=1400 audit(1727974265.584:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=937 comm="apparmor_parser" Oct 3 16:57:05.741763 [ 23.127621] audit: type=1400 audit(1727974265.588:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=937 comm="apparmor_parser" Oct 3 16:57:05.753764 [ 23.444253] audit: type=1400 audit(1727974265.920:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=934 comm="apparmor_parser" Oct 3 16:57:06.077784 [ 23.462893] audit: type=1400 audit(1727974265.920:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=934 comm="apparmor_parser" Oct 3 16:57:06.089783 [ 23.478762] audit: type=1400 audit(1727974265.920:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=934 comm="apparmor_parser" Oct 3 16:57:06.113687 [ 23.496275] audit: type=1400 audit(1727974265.920:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=934 comm="apparmor_parser" Oct 3 16:57:06.125797 Starting: AppArmorLoading AppArmor profiles...done. Oct 3 16:57:06.137644 . Oct 3 16:57:06.137644 [ 25.096676] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 16:57:07.713840 [ 25.096790] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 3 16:57:07.725720 Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1 Oct 3 16:57:09.265770 Copyright 2004-2022 Internet Systems Consortium. Oct 3 16:57:09.265832 All rights reserved. Oct 3 16:57:09.277746 For info, please visit https://www.isc.org/software/dhcp/ Oct 3 16:57:09.277808 Oct 3 16:57:09.277847 Listening on LPF/eth0/a6:46:13:77:e8:2f Oct 3 16:57:09.277891 Sending on LPF/eth0/a6:46:13:77:e8:2f Oct 3 16:57:09.289653 Sending on Socket/fallback Oct 3 16:57:09.289684 Created duid "\000\001\000\001.\221\207\371\246F\023w\350/". Oct 3 16:57:09.289714 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 Oct 3 16:57:09.301653 [ 28.386208] exynos4-fb 14400000.fimd: deferred probe timeout, ignoring dependency Oct 3 16:57:11.012845 [ 28.401712] exynos-mixer 14450000.mixer: deferred probe timeout, ignoring dependency Oct 3 16:57:11.024915 [ 28.409433] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations Oct 3 16:57:11.037072 [ 28.415792] exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm]) Oct 3 16:57:11.037173 [ 28.424255] exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm]) Oct 3 16:57:11.048915 [ 28.434268] exynos-drm exynos-drm: bound 14500000.dsi (ops hdmi_enable [exynosdrm]) Oct 3 16:57:11.061185 [ 28.440998] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm]) Oct 3 16:57:11.061185 [ 28.450065] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 16:57:11.072872 [ 28.456343] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 16:57:11.072872 [ 28.468406] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 Oct 3 16:57:11.084981 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 Oct 3 16:57:12.073661 DHCPOFFER of 10.149.64.45 from 10.149.64.4 Oct 3 16:57:12.073800 DHCPREQUEST for 10.149.64.45 on eth0 to 255.255.255.255 port 67 Oct 3 16:57:12.073852 DHCPACK of 10.149.64.45 from 10.149.64.4 Oct 3 16:57:12.073896 bound to 10.149.64.45 -- renewal in 295 seconds. Oct 3 16:57:12.085663 done. Oct 3 16:57:12.085710 Cleaning up temporary files.... Oct 3 16:57:12.121676 Starting nftables: none Oct 3 16:57:12.205687 . Oct 3 16:57:12.589650 INIT: Entering runlevel: 2 Oct 3 16:57:12.637649 Using makefile-style concurrent boot in runlevel 2. Oct 3 16:57:12.685721 Starting Apache httpd web server: apache2. Oct 3 16:57:14.700790 Starting periodic command scheduler: cron. Oct 3 16:57:15.024744 Starting NTP server: ntpd2024-10-03T16:51:14 ntpd[1131]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 16:57:15.156887 2024-10-03T16:51:14 ntpd[1131]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 16:57:15.168960 . Oct 3 16:57:15.168960 Starting system message bus: dbus. Oct 3 16:57:15.252911 Starting OpenBSD Secure Shell server: sshd. Oct 3 16:57:16.068897 Oct 3 16:57:17.136907 Debian GNU/Linux 12 arndale-westfield ttySAC2 Oct 3 16:57:17.137531 Oct 3 16:57:17.137534 arndale-westfield login: INIT: Switching to r INIT: No inittab.d directory found Oct 3 17:02:27.393792 INIUsing makefile-style concurrent boot in runlevel 6. Oct 3 17:02:27.465740 Stopping SMP IRQ Balancer: irqbalance. Oct 3 17:02:27.541703 Stopping nftables: none. Oct 3 17:02:27.553721 Stopping hotplug events dispatcher: systemd-udevd. Oct 3 17:02:27.565707 Saving the system clock to /dev/rtc0. Oct 3 17:02:28.297791 Hardware Clock updated to Thu Oct 3 16:56:28 UTC 2024. Oct 3 17:02:28.297872 Stopping Apache httpd web server: apache2. Oct 3 17:02:28.693638 Asking all remaining processes to terminate...done. Oct 3 17:02:29.017769 All processes ended within 1 seconds...done. Oct 3 17:02:29.029666 Deconfiguring network interfaces...ifdown: ignoring unknown interface eth0=eth0 Oct 3 17:02:29.125791 done. Oct 3 17:02:29.125845 [ 346.712765] EXT4-fs (sda1): unmounting filesystem. Oct 3 17:02:29.329781 Deactivating swap...done. Oct 3 17:02:29.389722 Unmounting local filesystems...done. Oct 3 17:02:29.389754 [ 347.068036] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 17:02:29.677847 Will now restart. Oct 3 17:02:29.965723 [ 347.376038] asix 1-3.2.4:1.0 eth0: Link is Down Oct 3 17:02:29.989806 [ 347.443662] sd 0:0:0:0: [sda] Synchronizing SCSI cache Oct 3 17:02:30.061748 [ 347.451458] wake enabled for irq 101 (gpx1-4) Oct 3 17:02:30.061811 [ 347.454340] wake enabled for irq 102 (gpx1-5) Oct 3 17:02:30.073719 [ 347.458703] wake enabled for irq 103 (gpx1-6) Oct 3 17:02:30.073780 [ 347.463036] wake enabled for irq 104 (gpx1-7) Oct 3 17:02:30.085683 [ 347.467375] wake enabled for irq 105 (gpx2-0) Oct 3 17:02:30.085737 [ 347.471715] wake enabled for irq 106 (gpx2-1) Oct 3 17:02:30.085784 [ 347.476575] reboot: Reó Oct 3 17:02:30.421735 Oct 3 17:02:30.421772 Oct 3 17:02:30.421848 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 17:02:30.433755 Oct 3 17:02:30.433807 CPU: Exynos5250@1000MHz Oct 3 17:02:30.433856 Oct 3 17:02:30.433896 Board: Arndale Oct 3 17:02:30.433977 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 17:02:30.445634 ready Oct 3 17:02:30.445682 DRAM: 2 GiB Oct 3 17:02:30.445722 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 17:02:30.457668 trace: enabled Oct 3 17:02:30.493632 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 17:02:30.853719 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 17:02:30.913742 In: serial Oct 3 17:02:30.913796 Out: serial Oct 3 17:02:30.913837 Err: serial Oct 3 17:02:30.913876 SCSI: ARNDALE SCSI INIT Oct 3 17:02:30.913918 Target spinup took 0 ms. Oct 3 17:02:30.925761 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 17:02:30.925823 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 17:02:30.937795 Net: Net Initialization Skipped Oct 3 17:02:30.937795 No ethernet found. Oct 3 17:02:30.937795 Hostname: arndale-westfield Oct 3 17:02:30.937795 Hit any key to stop autoboot: 2  1  0 Oct 3 17:02:32.869723 (Re)start USB... Oct 3 17:02:32.869774 USB0: USB EHCI 1.00 Oct 3 17:02:32.869813 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 17:02:38.461621 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 17:02:38.473643 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 17:02:38.917810 Waiting for Ethernet connection... done. Oct 3 17:02:40.513661 BOOTP broadcast 1 Oct 3 17:02:40.513713 BOOTP broadcast 2 Oct 3 17:02:43.573800 DHCP client bound to address 10.149.64.45 (3185 ms) Oct 3 17:02:43.593382 Using asx0 device Oct 3 17:02:43.593470 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 17:02:43.593597 Filename 'pxelinux.0'. Oct 3 17:02:43.593643 Load address: 0x43e00000 Oct 3 17:02:43.593686 Loading: *### Oct 3 17:02:43.609841 2.2 MiB/s Oct 3 17:02:43.609911 done Oct 3 17:02:43.609976 Bytes transferred = 42430 (a5be hex) Oct 3 17:02:43.610042 missing environment variable: pxeuuid Oct 3 17:02:43.610106 Retrieving file: pxelinux.cfg/0A95402D Oct 3 17:02:43.621843 Using asx0 device Oct 3 17:02:43.621909 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 17:02:43.621980 Filename 'pxelinux.cfg/0A95402D'. Oct 3 17:02:43.622046 Load address: 0x51000000 Oct 3 17:02:43.635142 Loading: *# Oct 3 17:02:43.635218 31.3 KiB/s Oct 3 17:02:43.635282 done Oct 3 17:02:43.635338 Bytes transferred = 65 (41 hex) Oct 3 17:02:43.635410 Config file found Oct 3 17:02:43.635472 Ignoring unknown command: serial Oct 3 17:02:43.645796 1: local Oct 3 17:02:43.645831 scanning bus for devices... Oct 3 17:02:43.645866 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 17:02:43.681739 Type: Hard Disk Oct 3 17:02:43.681797 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 17:02:43.681848 Found 1 device(s). Oct 3 17:02:43.681891 Oct 3 17:02:43.681929 SCSI device 0: Oct 3 17:02:43.693737 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 17:02:43.693796 Type: Hard Disk Oct 3 17:02:43.693840 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 17:02:43.705717 ... is now current device Oct 3 17:02:43.705774 Scanning scsi 0... Oct 3 17:02:43.705818 Found U-Boot script /boot.scr Oct 3 17:02:43.885608 1753 bytes read in 43 ms (39.1 KiB/s) Oct 3 17:02:43.933673 ## Executing script at 50000000 Oct 3 17:02:43.933704 Loading dtbs/6.1.112+/exynos5250-arndale.dtb Oct 3 17:02:43.945585 46686 bytes read in 2575 ms (17.6 KiB/s) Oct 3 17:02:46.429707 1015824 bytes read in 133 ms (7.3 MiB/s) Oct 3 17:02:46.585817 Loaded xen-4.20-unstable to 0x41000000 (f8010) Oct 3 17:02:46.597822 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan sched=rtds Oct 3 17:02:46.609760 10039808 bytes read in 464 ms (20.6 MiB/s) Oct 3 17:02:47.077608 Loaded vmlinuz-6.1.112+ to 0x42000000 (993200) Oct 3 17:02:47.089868 command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 17:02:47.101756 12059032 bytes read in 736 ms (15.6 MiB/s) Oct 3 17:02:47.821671 Loaded initrd.img-6.1.112+ to 0x43300000 (b80198) Oct 3 17:02:47.833664 chosen { Oct 3 17:02:47.833693 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan sched=rtds"; Oct 3 17:02:47.845645 #size-cells = <0x00000001>; Oct 3 17:02:47.845645 #address-cells = <0x00000001>; Oct 3 17:02:47.857690 stdout-path = "serial2:115200n8"; Oct 3 17:02:47.857727 module@1 { Oct 3 17:02:47.857750 reg = <0x43300000 0x00b80198>; Oct 3 17:02:47.857773 compatible = "xen,linux-initrd", "xen,multiboot-module"; Oct 3 17:02:47.869667 }; Oct 3 17:02:47.869696 module@0 { Oct 3 17:02:47.869719 bootargs = "ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Oct 3 17:02:47.881697 reg = <0x42000000 0x00993200>; Oct 3 17:02:47.881727 compatible = "xen,linux-zimage", "xen,multiboot-module"; Oct 3 17:02:47.893753 }; Oct 3 17:02:47.893810 }; Oct 3 17:02:47.893850 Booting 0x41000000 - 0x43000000 Oct 3 17:02:47.893893 Kernel image @ 0x41000000 [ 0x000000 - 0x135000 ] Oct 3 17:02:47.893938 ## Flattened Device Tree blob at 43000000 Oct 3 17:02:47.905724 Booting using the fdt blob at 0x43000000 Oct 3 17:02:47.905782 reserving fdt memory region: addr=43000000 size=c000 Oct 3 17:02:47.917722 Loading Device Tree to 4fff1000, end 4fffffff ... OK Oct 3 17:02:47.917784 Oct 3 17:02:47.917823 Starting kernel ...(fake run for tracing) Oct 3 17:02:47.929674 Oct 3 17:02:47.929726 Oct 3 17:02:47.929765 Starting kernel ... Oct 3 17:02:47.929806 Oct 3 17:02:47.929844 __ __ _ _ ____ ___ _ _ _ Oct 3 17:02:47.977759 \ \/ /___ _ __ | || | |___ \ / _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Oct 3 17:02:47.989783 \ // _ \ '_ \ | || |_ __) | | | |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Oct 3 17:02:47.989846 / \ __/ | | | |__ _| / __/| |_| |__| |_| | | | \__ \ || (_| | |_) | | __/ Oct 3 17:02:48.001748 /_/\_\___|_| |_| |_|(_)_____|\___/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Oct 3 17:02:48.013758 Oct 3 17:02:48.013810 (XEN) Xen version 4.20-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Thu Oct 3 15:21:50 UTC 2024 Oct 3 17:02:48.025747 (XEN) Latest ChangeSet: Wed Oct 2 08:59:03 2024 +0200 git:b102c9f1ce Oct 3 17:02:48.025811 (XEN) build-id: 51582c216da8646d6c60fa2305b80721a649af73 Oct 3 17:02:48.025860 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Oct 3 17:02:48.037739 (XEN) 32-bit Execution: Oct 3 17:02:48.037795 (XEN) Processor Features: 00001031:00011011 Oct 3 17:02:48.049738 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Oct 3 17:02:48.049801 (XEN) Extensions: GenericTimer Security Oct 3 17:02:48.049847 (XEN) Debug Features: 02010555 Oct 3 17:02:48.061773 (XEN) Auxiliary Features: 00000000 Oct 3 17:02:48.061831 (XEN) Memory Model Features: 10201105 20000000 Oct 3 17:02:48.061878 (XEN) 01240000 02102211 Oct 3 17:02:48.073757 (XEN) ISA Features: 02101110 13112111 21232041 Oct 3 17:02:48.073806 (XEN) 11112131 10011142 00000000 Oct 3 17:02:48.073851 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Oct 3 17:02:48.085779 (XEN) Set SYSRAM to 0000000041000070 (00200070) Oct 3 17:02:48.097709 (XEN) SMP: Allowing 2 CPUs Oct 3 17:02:48.097766 (XEN) enabled workaround for: ARM erratum 766422 Oct 3 17:02:48.097815 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Oct 3 17:02:48.109689 (XEN) GICv2 initialization: Oct 3 17:02:48.109776 (XEN) gic_dist_addr=0000000010481000 Oct 3 17:02:48.109825 (XEN) gic_cpu_addr=0000000010482000 Oct 3 17:02:48.109869 (XEN) gic_hyp_addr=0000000010484000 Oct 3 17:02:48.121677 (XEN) gic_vcpu_addr=0000000010486000 Oct 3 17:02:48.121705 (XEN) gic_maintenance_irq=25 Oct 3 17:02:48.121730 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Oct 3 17:02:48.133773 (XEN) Using scheduler: SMP RTDS Scheduler (rtds) Oct 3 17:02:48.133834 (XEN) Initializing RTDS scheduler Oct 3 17:02:48.133879 (XEN) WARNING: This is experimental software in development. Oct 3 17:02:48.145753 (XEN) Use at your own risk. Oct 3 17:02:48.145809 (XEN) Allocated console ring of 16 KiB. Oct 3 17:02:48.145854 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Oct 3 17:02:48.157763 (XEN) CPU0: Guest atomics will try 1 times before pausing the domain Oct 3 17:02:48.157827 (XEN) Bringing up CPU1 Oct 3 17:02:48.169739 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Oct 3 17:02:48.169803 (XEN) Brought up 2 CPUs Oct 3 17:02:48.169845 (XEN) CPU 1 booted. Oct 3 17:02:48.169886 (XEN) I/O virtualisation disabled Oct 3 17:02:48.181745 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Oct 3 17:02:48.181800 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Oct 3 17:02:48.181848 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Oct 3 17:02:48.193759 (XEN) Initializing RTDS scheduler Oct 3 17:02:48.193817 (XEN) WARNING: This is experimental software in development. Oct 3 17:02:48.205685 (XEN) Use at your own risk. Oct 3 17:02:48.205685 (XEN) common/sched/rt.c:745: RTDS: timer initialized on cpu 0 Oct 3 17:02:48.205685 (XEN) alternatives: Patching with alt table 002c31f0 -> 002c32c8 Oct 3 17:02:48.217780 (XEN) CPU0 will execute ICIALLU on guest exit Oct 3 17:02:48.217845 (XEN) CPU1 will execute ICIALLU on guest exit Oct 3 17:02:48.217890 (XEN) *** LOADING DOMAIN 0 *** Oct 3 17:02:48.229743 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Oct 3 17:02:48.229743 (XEN) Loading ramdisk from boot module @ 0000000043300000 Oct 3 17:02:48.241733 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Oct 3 17:02:48.241800 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Oct 3 17:02:48.817694 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Oct 3 17:02:48.829660 (XEN) Allocating PPI 16 for event channel interrupt Oct 3 17:02:48.865706 (XEN) d0: extended regions not supported for 32-bit guests Oct 3 17:02:48.865770 (XEN) Loading zImage from 0000000042000000 to 0000000067600000-0000000067f93200 Oct 3 17:02:48.877672 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d80198 Oct 3 17:02:48.961717 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b4c2 Oct 3 17:02:49.057754 (XEN) Initial low memory virq threshold set at 0x4000 pages. Oct 3 17:02:49.057820 (XEN) Scrubbing Free RAM in background Oct 3 17:02:49.069758 (XEN) Std. Loglevel: All Oct 3 17:02:49.069814 (XEN) Guest Loglevel: All Oct 3 17:02:49.069858 (XEN) *************************************************** Oct 3 17:02:49.081746 (XEN) WARNING: SILO mode is not enabled. Oct 3 17:02:49.081806 (XEN) It has implications on the security of the system, Oct 3 17:02:49.081854 (XEN) unless the communications have been forbidden between Oct 3 17:02:49.093777 (XEN) untrusted domains. Oct 3 17:02:49.093834 (XEN) *************************************************** Oct 3 17:02:49.093881 (XEN) 3... 2... 1... Oct 3 17:02:52.101791 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 17:02:52.101868 (XEN) Freed 384kB init memory. Oct 3 17:02:52.101913 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 17:02:53.169725 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Oct 3 17:02:53.193760 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Oct 3 17:02:53.193823 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Oct 3 17:02:53.205770 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Oct 3 17:02:53.205834 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:02:53.217694 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 17:02:53.253768 [ 0.000000] Linux version 6.1.112+ (osstest@himrod1) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Thu Oct 3 12:43:01 UTC 2024 Oct 3 17:02:53.265790 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 17:02:53.277703 [ 0.000000] CPU: div instructions available: patching division code Oct 3 17:02:53.289656 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 17:02:53.289693 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 17:02:53.301663 [ 0.000000] Memory policy: Data cache writealloc Oct 3 17:02:53.301696 [ 0.000000] Xen 4.20 support found Oct 3 17:02:53.313764 [ 0.000000] efi: UEFI not found. Oct 3 17:02:53.313823 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 Oct 3 17:02:53.313871 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 17:02:53.313915 [ 0.000000] Zone ranges: Oct 3 17:02:53.325748 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Oct 3 17:02:53.325810 [ 0.000000] Normal empty Oct 3 17:02:53.325855 [ 0.000000] HighMem empty Oct 3 17:02:53.337761 [ 0.000000] Movable zone start for each node Oct 3 17:02:53.337821 [ 0.000000] Early memory node ranges Oct 3 17:02:53.337866 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Oct 3 17:02:53.349752 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Oct 3 17:02:53.361660 [ 0.000000] psci: probing for conduit method from DT. Oct 3 17:02:53.361694 [ 0.000000] psci: PSCIv1.1 detected in firmware. Oct 3 17:02:53.361720 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Oct 3 17:02:53.373786 [ 0.000000] psci: Trusted OS migration not required Oct 3 17:02:53.373846 [ 0.000000] psci: SMC Calling Convention v1.2 Oct 3 17:02:53.385704 [ 0.000000] percpu: Embedded 16 pages/cpu s35412 r8192 d21932 u65536 Oct 3 17:02:53.385739 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 Oct 3 17:02:53.397818 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 17:02:53.412998 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 17:02:53.421825 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Oct 3 17:02:53.433749 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Oct 3 17:02:53.433813 [ 0.000000] Memory: 416844K/524288K available (14336K kernel code, 2180K rwdata, 5604K rodata, 2048K init, 438K bss, 41908K reserved, 65536K cma-reserved, 0K highmem) Oct 3 17:02:53.457776 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 17:02:53.457876 [ 0.000000] trace event string verifier disabled Oct 3 17:02:53.457926 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 17:02:53.469799 [ 0.000000] rcu: RCU event tracing is enabled. Oct 3 17:02:53.469860 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Oct 3 17:02:53.481746 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Oct 3 17:02:53.481810 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 17:02:53.493720 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 17:02:53.493776 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 17:02:53.505707 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 17:02:53.517768 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Oct 3 17:02:53.517834 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 17:02:53.529738 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 17:02:53.541758 [ 0.000012] Switching to timer-based delay loop, resolution 41ns Oct 3 17:02:53.541820 [ 0.000499] Console: colour dummy device 80x30 Oct 3 17:02:53.553725 [ 0.293140] printk: console [hvc0] enabled Oct 3 17:02:53.553785 [ 0.297332] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Oct 3 17:02:53.565744 [ 0.307732] CPU: Testing write buffer coherency: ok Oct 3 17:02:53.565805 [ 0.312674] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 17:02:53.577790 [ 0.322227] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 17:02:53.578499 [ 0.328641] pid_max: default: 32768 minimum: 301 Oct 3 17:02:53.589754 [ 0.333435] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 17:02:53.589824 [ 0.340708] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 17:02:53.601768 [ 0.349141] /cpus/cpu@0 missing clock-frequency property Oct 3 17:02:53.613741 [ 0.353929] /cpus/cpu@1 missing clock-frequency property Oct 3 17:02:53.613804 [ 0.359325] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 17:02:53.625745 [ 0.365824] xen:grant_table: Grant tables using version 1 layout Oct 3 17:02:53.625810 [ 0.371157] Grant table initialized Oct 3 17:02:53.625856 [ 0.374711] xen:events: Using FIFO-based ABI Oct 3 17:02:53.637751 [ 0.379015] Xen: initializing cpu0 Oct 3 17:02:53.637810 [ 0.382541] Setting up static identity map for 0x60300000 - 0x603000ac Oct 3 17:02:53.649743 [ 0.390313] rcu: Hierarchical SRCU implementation. Oct 3 17:02:53.649806 [ 0.393947] rcu: Max phase no-delay instances is 1000. Oct 3 17:02:53.649855 [ 0.401993] EFI services will not be available. Oct 3 17:02:53.661729 [ 0.405293] smp: Bringing up secondary CPUs ... Oct 3 17:02:53.661795 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:02:53.733749 [ 0.479914] Xen: initializing cpu1 Oct 3 17:02:53.733809 [ 0.480072] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 17:02:53.745752 [ 0.480101] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 17:02:53.757757 [ 0.498967] smp: Brought up 1 node, 2 CPUs Oct 3 17:02:53.757819 [ 0.502727] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 17:02:53.769724 [ 0.509026] CPU: All CPU(s) started in SVC mode. Oct 3 17:02:53.769788 [ 0.514433] devtmpfs: initialized Oct 3 17:02:53.769835 [ 0.527081] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 17:02:53.793740 [ 0.533565] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Oct 3 17:02:53.793816 [ 0.543288] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 17:02:53.805744 [ 0.551322] pinctrl core: initialized pinctrl subsystem Oct 3 17:02:53.805807 [ 0.557836] DMI not present or invalid. Oct 3 17:02:53.817739 [ 0.560917] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 17:02:53.817805 [ 0.568122] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 17:02:53.829735 [ 0.576938] thermal_sys: Registered thermal governor 'step_wise' Oct 3 17:02:53.841747 [ 0.577068] software IO TLB: area num 2. Oct 3 17:02:53.841809 [ 0.585771] software IO TLB: only able to allocate 8 MB Oct 3 17:02:53.841859 [ 0.592885] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Oct 3 17:02:53.853773 [ 0.598065] No ATAGs? Oct 3 17:02:53.853852 [ 0.600406] hw-breakpoint: Failed to enable monitor mode on CPU 0. Oct 3 17:02:53.865704 [ 0.608970] Serial: AMBA PL011 UART driver Oct 3 17:02:53.865765 [ 0.641096] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 62 Oct 3 17:02:53.901724 [ 0.690539] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 17:02:53.949705 [ 0.716128] xen:balloon: Initialising balloon driver Oct 3 17:02:53.973705 [ 0.723683] iommu: Default domain type: Translated Oct 3 17:02:53.985715 [ 0.727183] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 17:02:53.985773 [ 0.734168] SCSI subsystem initialized Oct 3 17:02:53.997626 [ 0.737698] usbcore: registered new interface driver usbfs Oct 3 17:02:53.997657 [ 0.742946] usbcore: registered new interface driver hub Oct 3 17:02:53.997683 [ 0.748343] usbcore: registered new device driver usb Oct 3 17:02:54.009619 [ 0.754964] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 17:02:54.009648 [ 0.758589] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 17:02:54.021752 [ 0.764885] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 17:02:54.033720 [ 0.773326] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 17:02:54.033785 [ 0.782467] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 17:02:54.045693 [ 0.787979] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 17:02:54.045753 [ 0.792669] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 17:02:54.057619 [ 0.798926] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 17:02:54.057649 [ 0.804161] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 17:02:54.069616 [ 0.808921] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 17:02:54.069646 [ 0.815034] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 17:02:54.069672 [ 0.820215] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 17:02:54.081621 [ 0.825131] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 17:02:54.081651 [ 0.831160] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 17:02:54.093761 [ 0.836938] pps_core: LinuxPPS API ver. 1 registered Oct 3 17:02:54.093823 [ 0.841374] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 17:02:54.105737 [ 0.850574] PTP clock support registered Oct 3 17:02:54.105796 [ 0.863549] EDAC MC: Ver: 3.0.0 Oct 3 17:02:54.117731 [ 0.867603] vgaarb: loaded Oct 3 17:02:54.129714 [ 0.872807] clocksource: Switched to clocksource arch_sys_counter Oct 3 17:02:54.129768 [ 0.894341] NET: Registered PF_INET protocol family Oct 3 17:02:54.153764 [ 0.898001] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Oct 3 17:02:54.168894 [ 0.905886] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 17:02:54.168894 [ 0.913601] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 17:02:54.180899 [ 0.921370] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Oct 3 17:02:54.180899 [ 0.929215] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Oct 3 17:02:54.192889 [ 0.936500] TCP: Hash tables configured (established 4096 bind 4096) Oct 3 17:02:54.192889 [ 0.942862] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 17:02:54.202123 [ 0.949415] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 17:02:54.213742 [ 0.956549] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 17:02:54.213805 [ 0.963054] RPC: Registered named UNIX socket transport module. Oct 3 17:02:54.225735 [ 0.968150] RPC: Registered udp transport module. Oct 3 17:02:54.225796 [ 0.972941] RPC: Registered tcp transport module. Oct 3 17:02:54.237779 [ 0.977697] RPC: Registered tcp NFSv4.1 backchannel transport module. Oct 3 17:02:54.237896 [ 0.984236] PCI: CLS 0 bytes, default 64 Oct 3 17:02:54.237946 [ 0.989515] Initialise system trusted keyrings Oct 3 17:02:54.249723 [ 0.992953] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Oct 3 17:02:54.249781 [ 1.004439] squashfs: version 4.0 (2009/01/31) Phillip Lougher Oct 3 17:02:54.261733 [ 1.009243] Trying to unpack rootfs image as initramfs... Oct 3 17:02:54.273586 [ 1.033650] NFS: Registering the id_resolver key type Oct 3 17:02:54.297625 [ 1.037378] Key type id_resolver registered Oct 3 17:02:54.297658 [ 1.041582] Key type id_legacy registered Oct 3 17:02:54.297683 [ 1.045760] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Oct 3 17:02:54.309642 [ 1.052440] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Oct 3 17:02:54.309679 [ 1.094684] Key type asymmetric registered Oct 3 17:02:54.357740 [ 1.097415] Asymmetric key parser 'x509' registered Oct 3 17:02:54.357823 [ 1.102477] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 17:02:54.369719 [ 1.109852] io scheduler mq-deadline registered Oct 3 17:02:54.369789 [ 1.114457] io scheduler kyber registered Oct 3 17:02:54.369848 [ 1.153674] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 17:02:54.417696 [ 1.233993] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 17:02:54.489736 [ 1.240192] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 17:02:54.501744 [ 1.274824] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 17:02:54.537756 [ 1.281023] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 17:02:54.549562 [ 1.303312] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 17:02:54.561648 [ 1.309510] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 17:02:54.573706 [ 1.344838] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 17:02:54.609715 [ 1.351045] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 17:02:54.609783 [ 1.377063] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 17:02:54.645607 [ 1.421386] xen:xen_evtchn: Event-channel device installed Oct 3 17:02:54.681728 [ 1.514604] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 17:02:54.777687 [ 1.535968] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 113, base_baud = 0) is a S3C6400/10 Oct 3 17:02:54.801716 [ 1.544061] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 114, base_baud = 0) is a S3C6400/10 Oct 3 17:02:54.801787 [ 1.563164] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 115, base_baud = 0) is a S3C6400/10 Oct 3 17:02:54.825734 [ 1.609011] SuperH (H)SCI(F) driver initialized Oct 3 17:02:54.861741 [ 1.613597] STMicroelectronics ASC driver initialized Oct 3 17:02:54.873740 [ 1.618870] STM32 USART driver initialized Oct 3 17:02:54.873799 [ 1.623785] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 17:02:54.885726 [ 1.647082] brd: module loaded Oct 3 17:02:54.897699 [ 1.653953] loop: module loaded Oct 3 17:02:54.909684 [ 1.697621] Invalid max_queues (4), will use default max: 2. Oct 3 17:02:54.957677 [ 1.725723] tun: Universal TUN/TAP device driver, 1.6 Oct 3 17:02:54.981707 [ 1.729662] CAN device driver interface Oct 3 17:02:54.993724 [ 1.734960] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Oct 3 17:02:54.993787 [ 1.745343] Freeing initrd memory: 11780K Oct 3 17:02:55.005738 [ 1.745973] xen_netfront: Initialising Xen virtual ethernet driver Oct 3 17:02:55.005802 [ 1.754337] pegasus: Pegasus/Pegasus II USB Ethernet driver Oct 3 17:02:55.017787 [ 1.759900] usbcore: registered new interface driver pegasus Oct 3 17:02:55.017851 [ 1.765649] usbcore: registered new interface driver asix Oct 3 17:02:55.029741 [ 1.771092] usbcore: registered new interface driver ax88179_178a Oct 3 17:02:55.029804 [ 1.777265] usbcore: registered new interface driver cdc_ether Oct 3 17:02:55.041735 [ 1.783175] usbcore: registered new interface driver smsc75xx Oct 3 17:02:55.041799 [ 1.788982] usbcore: registered new interface driver smsc95xx Oct 3 17:02:55.053747 [ 1.794798] usbcore: registered new interface driver net1080 Oct 3 17:02:55.053809 [ 1.800524] usbcore: registered new interface driver cdc_subset Oct 3 17:02:55.065745 [ 1.806520] usbcore: registered new interface driver zaurus Oct 3 17:02:55.065807 [ 1.812157] usbcore: registered new interface driver cdc_ncm Oct 3 17:02:55.077725 [ 1.821445] usbcore: registered new interface driver usb-storage Oct 3 17:02:55.077789 [ 1.855884] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 17:02:55.113683 [ 1.864706] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T16:50:55 UTC (1727974255) Oct 3 17:02:55.125622 [ 1.873303] i2c_dev: i2c /dev entries driver Oct 3 17:02:55.125651 [ 1.883573] syscon-poweroff 10040000.system-controller:syscon-poweroff: pm_power_off already claimed for psci_sys_poweroff Oct 3 17:02:55.149618 [ 1.893309] syscon-poweroff: probe of 10040000.system-controller:syscon-poweroff failed with error -16 Oct 3 17:02:55.161672 [ 1.904564] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 17:02:55.161729 [ 1.915410] device-mapper: uevent: version 1.0.3 Oct 3 17:02:55.173617 [ 1.918876] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Oct 3 17:02:55.185713 [ 1.927857] cpu cpu0: OPP table can't be empty Oct 3 17:02:55.185766 [ 1.932914] failed to register cpuidle driver Oct 3 17:02:55.185812 [ 1.936102] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Oct 3 17:02:55.197763 [ 1.944417] sdhci: Secure Digital Host Controller Interface driver Oct 3 17:02:55.209723 [ 1.949467] sdhci: Copyright(c) Pierre Ossman Oct 3 17:02:55.209784 [ 1.957467] sdhci-pltfm: SDHCI platform and OF driver helper Oct 3 17:02:55.221727 [ 1.965191] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 17:02:55.221791 [ 1.970478] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Oct 3 17:02:55.233788 [ 1.977138] usbcore: registered new interface driver usbhid Oct 3 17:02:55.233832 [ 1.981965] usbhid: USB HID core driver Oct 3 17:02:55.245715 [ 1.992845] NET: Registered PF_INET6 protocol family Oct 3 17:02:55.245777 [ 1.997412] Segment Routing with IPv6 Oct 3 17:02:55.257759 [ 2.000203] In-situ OAM (IOAM) with IPv6 Oct 3 17:02:55.257818 [ 2.004284] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Oct 3 17:02:55.269768 [ 2.010601] NET: Registered PF_PACKET protocol family Oct 3 17:02:55.269830 [ 2.015331] can: controller area network core Oct 3 17:02:55.269877 [ 2.019739] NET: Registered PF_CAN protocol family Oct 3 17:02:55.281771 [ 2.024599] can: raw protocol Oct 3 17:02:55.281828 [ 2.027599] can: broadcast manager protocol Oct 3 17:02:55.281875 [ 2.031856] can: netlink gateway - max_hops=1 Oct 3 17:02:55.293755 [ 2.036556] Key type dns_resolver registered Oct 3 17:02:55.293815 [ 2.041214] ThumbEE CPU extension supported. Oct 3 17:02:55.305737 [ 2.045005] Registering SWP/SWPB emulation handler Oct 3 17:02:55.305800 [ 2.050278] Loading compiled-in X.509 certificates Oct 3 17:02:55.305849 [ 2.078926] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 17:02:55.341737 [ 2.085070] clk: Not disabling unused clocks Oct 3 17:02:55.341797 [ 2.092045] Freeing unused kernel image (initmem) memory: 2048K Oct 3 17:02:55.353712 [ 2.098134] Run /init as init process Oct 3 17:02:55.353792 Loading, please wait... Oct 3 17:02:55.377695 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 17:02:55.452861 [ 3.430750] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 17:02:56.689847 [ 3.437906] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 17:02:56.701713 [ 3.458499] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 17:02:56.725791 [ 3.473765] phy phy-12130000.phy.9: phy_power_on was called before phy_init Oct 3 17:02:56.737729 [ 3.479384] exynos-ohci 12120000.usb: USB Host Controller Oct 3 17:02:56.737793 [ 3.484893] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Oct 3 17:02:56.749727 [ 3.493679] Synopsys Designware Multimedia Card Interface Driver Oct 3 17:02:56.749789 [ 3.499776] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 Oct 3 17:02:56.761697 [ 3.508018] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 17:02:56.773676 [ 3.508085] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 17:02:56.773734 [ 3.534186] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 17:02:56.797699 [ 3.540356] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 17:02:56.797759 [ 3.547768] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 17:02:56.809636 [ 3.585834] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 17:02:56.845758 [ 3.591815] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Oct 3 17:02:56.857743 [ 3.600768] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 17:02:56.869741 [ 3.610825] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 17:02:56.869806 [ 3.616489] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 17:02:56.881642 [ 3.622024] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo Oct 3 17:02:56.881682 [ 3.632062] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 17:02:56.893643 [ 3.638024] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 17:02:56.893677 [ 3.643543] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 127,32 bit host data width,128 deep fifo Oct 3 17:02:56.905749 [ 3.655190] hub 1-0:1.0: USB hub found Oct 3 17:02:56.917673 [ 3.659054] hub 1-0:1.0: 3 ports detected Oct 3 17:02:56.917725 [ 3.703384] phy phy-12130000.phy.9: phy_power_on was called before phy_init Oct 3 17:02:56.965752 [ 3.709154] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 17:02:56.965815 [ 3.715816] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 17:02:56.977721 [ 3.725592] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Oct 3 17:02:56.989706 [ 3.736459] mmc_host mmc0: card is polling. Oct 3 17:02:56.989765 [ 3.739355] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 17:02:57.001740 [ 3.763579] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 17:02:57.025732 [ 3.813079] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 17:02:57.073700 [ 3.854470] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 Oct 3 17:02:57.109716 [ 3.871591] scsi host0: ahci-dwc Oct 3 17:02:57.125721 [ 3.874129] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 128 Oct 3 17:02:57.137750 [ 3.882872] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 17:02:57.137813 [ 3.907433] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 17:02:57.173755 [ 3.918767] mmc0: new DDR MMC card at address 0001 Oct 3 17:02:57.173816 [ 3.920480] hub 2-0:1.0: USB hub found Oct 3 17:02:57.185750 [ 3.927632] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Oct 3 17:02:57.185812 [ 3.943074] hub 2-0:1.0: 3 ports detected Oct 3 17:02:57.197716 [ 3.946283] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 17:02:57.209728 [ 3.961312] mmcblk0: p1 p2 p3 p4 Oct 3 17:02:57.221724 [ 3.968212] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Oct 3 17:02:57.221786 [ 3.972749] mmc1: new high speed SDHC card at address aaaa Oct 3 17:02:57.233748 [ 3.974879] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Oct 3 17:02:57.233781 [ 3.985063] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Oct 3 17:02:57.245743 [ 3.992042] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Oct 3 17:02:57.245805 [ 3.997689] s3c-rtc 101e0000.rtc: registered as rtc1 Oct 3 17:02:57.257694 [ 4.034308] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Oct 3 17:02:57.293704 [ 4.383051] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 17:02:57.641830 [ 4.388131] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Oct 3 17:02:57.653756 [ 4.395991] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 17:02:57.653823 [ 4.401862] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 17:02:57.665745 [ 4.408808] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 17:02:57.665808 [ 4.414129] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 17:02:57.677698 [ 4.421799] ata1.00: configured for UDMA/133 Oct 3 17:02:57.677698 [ 4.426573] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 17:02:57.689668 [ 4.435244] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 17:02:57.701714 [ 4.436167] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 17:02:57.701764 [ 4.444647] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Oct 3 17:02:57.713659 [ 4.451303] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 17:02:57.713873 [ 4.457651] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 17:02:57.725666 [ 4.462875] sd 0:0:0:0: [sda] Write Protect is off Oct 3 17:02:57.725666 [ 4.468215] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 17:02:57.737701 [ 4.480756] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 17:02:57.737727 [ 4.480842] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 17:02:57.749797 [ 4.490341] hub 3-0:1.0: USB hub found Oct 3 17:02:57.749855 [ 4.496675] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 17:02:57.761734 [ 4.500632] hub 3-0:1.0: 1 port detected Oct 3 17:02:57.761793 [ 4.512920] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 17:02:57.773777 [ 4.520406] hub 4-0:1.0: USB hub found Oct 3 17:02:57.773834 [ 4.523640] hub 4-0:1.0: 1 port detected Oct 3 17:02:57.785766 [ 4.529928] sda: sda1 sda2 < sda5 > Oct 3 17:02:57.785824 [ 4.532852] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 17:02:57.785872 [ 4.637805] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 17:02:57.905704 [ 4.711514] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 17:02:57.977672 [ 4.820175] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:02:58.085671 [ 4.928302] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:02:58.193716 [ 5.036518] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:02:58.301726 [ 5.144602] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:02:58.409749 [ 5.252657] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:02:58.517783 [ 5.360721] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:02:58.625733 [ 5.468786] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:02:58.733725 [ 5.576853] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:02:58.841667 [ 5.985572] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 17:02:59.249764 [ 6.093303] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 17:02:59.357737 [ 6.701604] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 17:02:59.957826 [ 7.062809] random: crng init done Oct 3 17:03:00.317625 Begin: Loading essential drivers ... done. Oct 3 17:03:00.905576 Begin: Running /scripts/init-premount ... done. Oct 3 17:03:03.917781 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 17:03:03.917857 Begin: Running /scripts/local-premount ... done. Oct 3 17:03:03.929734 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 17:03:03.977717 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 17:03:04.073703 /dev/mapper/arndale--westfield--vg-root: clean, 46039/1220608 files, 625971/4882432 blocks Oct 3 17:03:04.277726 done. Oct 3 17:03:04.277777 [ 11.033267] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 17:03:04.289790 [ 11.357053] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 17:03:04.613768 done. Oct 3 17:03:04.613823 Begin: Running /scripts/local-bottom ... done. Oct 3 17:03:04.661730 Begin: Running /scripts/init-bottom ... done. Oct 3 17:03:04.709642 INIT: version 3.06 booting Oct 3 17:03:05.093735 INIT: No inittab.d directory found Oct 3 17:03:05.153730 Using makefile-style concurrent boot in runlevel S. Oct 3 17:03:05.429740 Starting hotplug events dispatcher: systemd-udevd. Oct 3 17:03:06.869752 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 17:03:07.301643 Synthesizing the initial hotplug events (devices)...[ 14.722917] wm8994 3-001a: Device is not a WM8994, ID is 0 Oct 3 17:03:07.985757 [ 14.729853] wm8994: probe of 3-001a failed with error -22 Oct 3 17:03:07.985833 [ 15.029132] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Oct 3 17:03:08.285755 done. Oct 3 17:03:08.297659 Waiting for /dev to be fully populated...[ 15.104355] mc: Linux media interface: v0.10 Oct 3 17:03:08.357715 [ 15.117184] s5p-secss 10830000.sss: s5p-sss driver registered Oct 3 17:03:08.381673 [ 15.230428] videodev: Linux video capture interface: v2.00 Oct 3 17:03:08.489691 [ 15.456914] s5p-mfc 11000000.codec: Adding to iommu group 0 Oct 3 17:03:08.717773 [ 15.461452] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 17:03:08.729710 [ 15.482438] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Oct 3 17:03:08.741781 [ 15.509202] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 17:03:08.765798 [ 15.521643] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 17:03:08.789805 [ 15.529086] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 17:03:08.789921 [ 15.541545] s5p-mfc 11000000.codec: decoder registered as /dev/video0 Oct 3 17:03:08.801784 [ 15.548542] exynos-gsc 13e00000.gsc: Adding to iommu group 1 Oct 3 17:03:08.801847 [ 15.552993] s5p-mfc 11000000.codec: encoder registered as /dev/video1 Oct 3 17:03:08.813809 [ 15.562851] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 17:03:08.825760 [ 15.583056] exynos-gsc 13e10000.gsc: Adding to iommu group 2 Oct 3 17:03:08.837742 [ 15.590505] exynos-gsc 13e20000.gsc: Adding to iommu group 3 Oct 3 17:03:08.849753 [ 15.604088] exynos-gsc 13e30000.gsc: Adding to iommu group 4 Oct 3 17:03:08.861745 [ 15.672494] blk_print_req_error: 6 callbacks suppressed Oct 3 17:03:08.933774 [ 15.672504] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:03:08.945710 [ 15.746185] usb3503 usb-hub: switched to HUB mode Oct 3 17:03:09.005775 [ 15.749531] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 17:03:09.005838 [ 15.787282] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:03:09.053718 [ 15.895404] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:03:09.161691 [ 16.003551] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:03:09.269717 [ 16.056203] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Oct 3 17:03:09.317750 [ 16.082853] usb 2-3: new high-speed USB device number 2 using exynos-ehci Oct 3 17:03:09.341760 [ 16.111739] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:03:09.377720 [ 16.219879] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:03:09.485721 [ 16.285448] hub 2-3:1.0: USB hub found Oct 3 17:03:09.545736 [ 16.288713] hub 2-3:1.0: 3 ports detected Oct 3 17:03:09.545796 [ 16.329314] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:03:09.593729 [ 16.437474] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:03:09.701718 [ 16.463901] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 17:03:09.725787 [ 16.471558] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 17:03:09.737777 [ 16.480307] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 17:03:09.749759 [ 16.493789] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 17:03:09.761783 [ 16.501465] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 17:03:09.761855 [ 16.510241] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 17:03:09.773736 [ 16.622877] usb 2-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 17:03:09.881695 [ 16.775494] hub 2-3.2:1.0: USB hub found Oct 3 17:03:10.037707 [ 16.778460] hub 2-3.2:1.0: 4 ports detected Oct 3 17:03:10.037767 [ 16.836703] usbcore: registered new device driver onboard-usb-hub Oct 3 17:03:10.097750 [ 16.846673] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 17:03:10.109743 [ 16.954425] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 17:03:10.217705 [ 16.965608] hub 2-3.2:1.0: USB hub found Oct 3 17:03:10.217737 [ 16.968579] hub 2-3.2:1.0: 4 ports detected Oct 3 17:03:10.229735 [ 16.981107] hub 2-3.2:1.0: USB hub found Oct 3 17:03:10.241728 [ 16.984128] hub 2-3.2:1.0: 4 ports detected Oct 3 17:03:10.241760 [ 17.302834] usb 2-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 17:03:10.565723 [ 17.456994] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 17:03:10.721683 [ 17.562824] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 17:03:10.829712 [ 18.124737] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 17:03:11.393798 [ 18.139617] Asix Electronics AX88772A usb-002:004:10: attached PHY driver (mii_bus:phy_addr=usb-002:004:10, irq=POLL) Oct 3 17:03:11.405766 [ 18.149465] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 86:21:b8:c3:63:40 Oct 3 17:03:11.417690 done. Oct 3 17:03:11.657694 [ 18.750134] EXT4-fs (dm-0): re-mounted. Quota mode: disabled. Oct 3 17:03:12.005599 Checking file systems.../dev/sda1: clean, 2105/61056 files, 43334/243968 blocks Oct 3 17:03:13.097622 done. Oct 3 17:03:13.133606 Cleaning up temporary files... /tmp Oct 3 17:03:13.301588 . Oct 3 17:03:13.301621 [ 20.241201] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 17:03:13.505600 [ 20.289904] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 17:03:13.553627 [ 20.385296] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k Oct 3 17:03:13.649589 Mounting local filesystems...done. Oct 3 17:03:13.889715 Activating swapfile swap, if any...done. Oct 3 17:03:13.904690 Cleaning up temporary files.... Oct 3 17:03:13.913614 Starting Setting kernel variables: sysctl. Oct 3 17:03:14.093605 [ 22.178955] xenbr0: port 1(eth0) entered blocking state Oct 3 17:03:15.437709 [ 22.182872] xenbr0: port 1(eth0) entered disabled state Oct 3 17:03:15.437760 [ 22.188259] device eth0 entered promiscuous mode Oct 3 17:03:15.449651 [ 22.198112] asix 2-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 17:03:15.461625 Configuring network interfaces...RTNETLINK answers: Operation not supported Oct 3 17:03:17.381660 Oct 3 17:03:17.381699 Waiting for xenbr0 to get ready (MAXWAIT is 2 seconds). Oct 3 17:03:17.381726 [ 24.401613] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 17:03:17.657625 [ 24.402894] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 3 17:03:17.669681 [ 24.413983] xenbr0: port 1(eth0) entered blocking state Oct 3 17:03:17.669699 [ 24.419196] xenbr0: port 1(eth0) entered forwarding state Oct 3 17:03:17.681669 [ 24.424790] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready Oct 3 17:03:17.681693 done. Oct 3 17:03:17.849620 Cleaning up temporary files.... Oct 3 17:03:17.897626 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Oct 3 17:03:17.945633 Starting nftables: none Oct 3 17:03:17.969621 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Oct 3 17:03:18.041659 failed! Oct 3 17:03:18.041679 startpar: service(s) returned failure: nftables ... failed! Oct 3 17:03:18.053638 INIT: Entering runlevel: 2 Oct 3 17:03:18.065625 Using makefile-style concurrent boot in runlevel 2. Oct 3 17:03:18.077639 Starting Apache httpd web server: apache2AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.149.64.45. Set the 'ServerName' directive globally to suppress this message Oct 3 17:03:18.785776 . Oct 3 17:03:19.833729 Starting NTP server: ntpd2024-10-03T16:51:20 ntpd[1144]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 17:03:20.053814 2024-10-03T16:51:20 ntpd[1144]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 17:03:20.065754 . Oct 3 17:03:20.065805 Starting SMP IRQ Balancer: irqbalance. Oct 3 17:03:20.977748 Starting system message bus: dbus. Oct 3 17:03:21.013696 Starting OpenBSD Secure Shell server: sshd. Oct 3 17:03:21.373744 Starting /usr/local/sbin/oxenstored.... Oct 3 17:03:24.681070 Setting domain 0 name, domid and JSON config... Oct 3 17:03:24.681151 Done setting up Dom0 Oct 3 17:03:24.693042 Starting xenconsoled... Oct 3 17:03:24.693095 Starting QEMU as disk backend for dom0(XEN) common/grant_table.c:1909:d0v1 Expanding d0 grant table from 1 to 2 frames Oct 3 17:03:24.704970 Oct 3 17:03:24.705023 [ 31.523316] vif vif-1 enX1: renamed from eth1 Oct 3 17:03:24.788944 Oct 3 17:03:25.796819 Debian GNU/Linux 12 arndale-westfield hvc0 Oct 3 17:03:25.796819 Oct 3 17:03:25.796819 arndale-westfield login: [ 112.126030] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 17:04:45.384848 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 17:05:04.828704 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 17:11:46.189646 [ 625.416651] EXT4-fs (dm-3): unmounting filesystem. Oct 3 17:13:18.661792 [ 632.262206] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 17:13:25.521737 [ 637.331259] EXT4-fs (dm-3): unmounting filesystem. Oct 3 17:13:30.580879 [ 652.619986] xenbr0: port 2(vif1.0) entered blocking state Oct 3 17:13:45.877743 [ 652.624106] xenbr0: port 2(vif1.0) entered disabled state Oct 3 17:13:45.877829 [ 652.629707] device vif1.0 entered promiscuous mode Oct 3 17:13:45.877878 (XEN) d1v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 17:13:46.981703 (XEN) d1v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:13:46.993714 (XEN) d1v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:13:47.029675 (XEN) d1v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:13:47.053684 (XEN) d1v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:13:47.089652 [ 654.319010] xen-blkback: backend/vbd/1/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 17:13:47.581676 [ 654.436640] xen-blkback: backend/vbd/1/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 17:13:47.689701 (XEN) common/grant_table.c:1909:d1v0 Expanding d1 grant table from 1 to 2 frames Oct 3 17:13:47.761734 (XEN) common/grant_table.c:1909:d1v0 Expanding d1 grant table from 2 to 3 frames Oct 3 17:13:47.773712 [ 654.625049] vif vif-1-0 vif1.0: Guest Rx ready Oct 3 17:13:47.881630 [ 654.628341] IPv6: ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready Oct 3 17:13:47.881678 [ 654.637512] xenbr0: port 2(vif1.0) entered blocking state Oct 3 17:13:47.893620 [ 654.645690] xenbr0: port 2(vif1.0) entered forwarding state Oct 3 17:13:47.905625 (XEN) gnttab_mark_dirty not implemented yet Oct 3 17:13:47.929640 (XEN) common/grant_table.c:1909:d1v3 Expanding d1 grant table from 3 to 4 frames Oct 3 17:14:11.176882 [ 706.591522] xenbr0: port 2(vif1.0) entered disabled state Oct 3 17:14:39.845804 [ 706.863238] xenbr0: port 2(vif1.0) entered disabled state Oct 3 17:14:40.121783 [ 706.867672] device vif1.0 left promiscuous mode Oct 3 17:14:40.121783 [ 706.871884] xenbr0: port 2(vif1.0) entered disabled state Oct 3 17:14:40.121783 [ 734.437164] xenbr0: port 2(vif2.0) entered blocking state Oct 3 17:15:07.685730 [ 734.441196] xenbr0: port 2(vif2.0) entered disabled state Oct 3 17:15:07.697691 [ 734.446870] device vif2.0 entered promiscuous mode Oct 3 17:15:07.697748 (XEN) d2v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 17:15:08.777467 (XEN) d2v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:15:08.789473 (XEN) d2v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:15:08.825455 (XEN) d2v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:15:08.861481 (XEN) d2v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:15:08.885475 [ 736.096132] xen-blkback: backend/vbd/2/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 17:15:09.353474 (XEN) common/grant_table.c:1909:d2v0 Expanding d2 grant table from 1 to 2 frames Oct 3 17:15:09.425606 [ 736.167566] x(XEN) common/grant_table.c:1909:d2v0 Expanding d2 grant table from 2 to 3 frames Oct 3 17:15:09.425606 en-blkback: backend/vbd/2/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 17:15:09.437484 [ 736.297201] vif vif-2-0 vif2.0: Guest Rx ready Oct 3 17:15:09.545474 [ 736.304327] IPv6: ADDRCONF(NETDEV_CHANGE): vif2.0: link becomes ready Oct 3 17:15:09.557511 [ 736.310455] xenbr0: port 2(vif2.0) entered blocking state Oct 3 17:15:09.557511 [ 736.317615] xenbr0: port 2(vif2.0) entered forwarding state Oct 3 17:15:09.569473 (XEN) common/grant_table.c:1909:d2v2 Expanding d2 grant table from 3 to 4 frames Oct 3 17:15:30.833803 [ 785.283965] xenbr0: port 2(vif2.0) entered disabled state Oct 3 17:15:58.537924 [ 785.564593] xenbr0: port 2(vif2.0) entered disabled state Oct 3 17:15:58.813906 [ 785.569043] device vif2.0 left promiscuous mode Oct 3 17:15:58.825842 [ 785.573280] xenbr0: port 2(vif2.0) entered disabled state Oct 3 17:15:58.825901 [ 812.468045] xenbr0: port 2(vif3.0) entered blocking state Oct 3 17:16:25.725743 [ 812.472080] xenbr0: port 2(vif3.0) entered disabled state Oct 3 17:16:25.725819 [ 812.477801] device vif3.0 entered promiscuous mode Oct 3 17:16:25.725868 (XEN) d3v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 17:16:26.805586 (XEN) d3v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:16:26.829608 (XEN) d3v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:16:26.865606 (XEN) d3v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:16:26.889588 (XEN) d3v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:16:26.925595 [ 814.217955] xen-blkback: backend/vbd/3/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 17:16:27.477692 (XEN) common/grant_table.c:1909:d3v1 Expanding d3 grant table from 1 to 2 frames Oct 3 17:16:27.525740 (XEN) common/grant_table.c:1909:d3v1 Expanding d3 grant table from 2 to 3 frames Oct 3 17:16:27.537738 [ 814.289774] xen-blkback: backend/vbd/3/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 17:16:27.549707 [ 814.417237] vif vif-3-0 vif3.0: Guest Rx ready Oct 3 17:16:27.669728 [ 814.424382] IPv6: ADDRCONF(NETDEV_CHANGE): vif3.0: link becomes ready Oct 3 17:16:27.681721 [ 814.434002] xenbr0: port 2(vif3.0) entered blocking state Oct 3 17:16:27.681784 [ 814.439684] xenbr0: port 2(vif3.0) entered forwarding state Oct 3 17:16:27.693681 (XEN) common/grant_table.c:1909:d3v1 Expanding d3 grant table from 3 to 4 frames Oct 3 17:16:46.433752 [ 865.475986] xenbr0: port 2(vif3.0) entered disabled state Oct 3 17:17:18.725064 [ 865.743515] xenbr0: port 2(vif3.0) entered disabled state Oct 3 17:17:18.989097 [ 865.748302] device vif3.0 left promiscuous mode Oct 3 17:17:19.001142 [ 865.752174] xenbr0: port 2(vif3.0) entered disabled state Oct 3 17:17:19.001271 [ 892.657503] xenbr0: port 2(vif4.0) entered blocking state Oct 3 17:17:45.908852 [ 892.661539] xenbr0: port 2(vif4.0) entered disabled state Oct 3 17:17:45.908852 [ 892.667219] device vif4.0 entered promiscuous mode Oct 3 17:17:45.920817 (XEN) d4v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 17:17:46.996885 (XEN) d4v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:17:47.020865 (XEN) d4v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:17:47.056846 (XEN) d4v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:17:47.080948 (XEN) d4v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:17:47.104881 [ 894.346166] xen-blkback: backend/vbd/4/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 17:17:47.600880 [ 894.427936] xen-blkback: backend/vbd/4/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 17:17:47.684857 (XEN) common/grant_table.c:1909:d4v3 Expanding d4 grant table from 1 to 2 frames Oct 3 17:17:47.756904 (XEN) common/grant_table.c:1909:d4v3 Expanding d4 grant table from 2 to 3 frames Oct 3 17:17:47.765728 [ 894.615526] vif vif-4-0 vif4.0: Guest Rx ready Oct 3 17:17:47.864912 [ 894.620393] IPv6: ADDRCONF(NETDEV_CHANGE): vif4.0: link becomes ready Oct 3 17:17:47.876835 [ 894.626692] xenbr0: port 2(vif4.0) entered blocking state Oct 3 17:17:47.876835 [ 894.634478] xenbr0: port 2(vif4.0) entered forwarding state Oct 3 17:17:47.888864 (XEN) common/grant_table.c:1909:d4v3 Expanding d4 grant table from 3 to 4 frames Oct 3 17:18:06.817786 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 17:18:26.837660 [ 944.769516] xenbr0: port 2(vif4.0) entered disabled state Oct 3 17:18:38.024993 [ 945.013224] xenbr0: port 2(vif4.0) entered disabled state Oct 3 17:18:38.264926 [ 945.017866] device vif4.0 left promiscuous mode Oct 3 17:18:38.264926 [ 945.021944] xenbr0: port 2(vif4.0) entered disabled state Oct 3 17:18:38.276843 [ 971.885910] xenbr0: port 2(vif5.0) entered blocking state Oct 3 17:19:05.132870 [ 971.889961] xenbr0: port 2(vif5.0) entered disabled state Oct 3 17:19:05.144875 [ 971.895624] device vif5.0 entered promiscuous mode Oct 3 17:19:05.144875 (XEN) d5v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 17:19:06.220796 (XEN) d5v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:19:06.232831 (XEN) d5v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:19:06.268775 (XEN) d5v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:19:06.304802 (XEN) d5v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:19:06.328835 [ 973.636417] xen-blkback: backend/vbd/5/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 17:19:06.893017 [ 973.700303] xen-blkback: backend/vbd/5/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 17:19:06.952866 (XEN) common/grant_table.c:1909:d5v2 Expanding d5 grant table from 1 to 2 frames Oct 3 17:19:06.964891 (XEN) common/grant_table.c:1909:d5v2 Expanding d5 grant table from 2 to 3 frames Oct 3 17:19:06.964891 [ 973.827694] vif vif-5-0 vif5.0: Guest Rx ready Oct 3 17:19:07.072977 [ 973.833649] IPv6: ADDRCONF(NETDEV_CHANGE): vif5.0: link becomes ready Oct 3 17:19:07.085025 [ 973.838873] xenbr0: port 2(vif5.0) entered blocking state Oct 3 17:19:07.085056 [ 973.844563] xenbr0: port 2(vif5.0) entered forwarding state Oct 3 17:19:07.097024 (XEN) common/grant_table.c:1909:d5v1 Expanding d5 grant table from 3 to 4 frames Oct 3 17:19:25.921980 [ 1022.495891] xenbr0: port 2(vif5.0) entered disabled state Oct 3 17:19:55.749753 [ 1022.763343] xenbr0: port 2(vif5.0) entered disabled state Oct 3 17:19:56.013658 [ 1022.767770] device vif5.0 left promiscuous mode Oct 3 17:19:56.013658 [ 1022.771992] xenbr0: port 2(vif5.0) entered disabled state Oct 3 17:19:56.025720 [ 1049.653151] xenbr0: port 2(vif6.0) entered blocking state Oct 3 17:20:22.893716 [ 1049.657183] xenbr0: port 2(vif6.0) entered disabled state Oct 3 17:20:22.905688 [ 1049.662913] device vif6.0 entered promiscuous mode Oct 3 17:20:22.905722 (XEN) d6v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 17:20:23.985717 (XEN) d6v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:20:24.009656 (XEN) d6v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:20:24.045639 (XEN) d6v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:20:24.069655 (XEN) d6v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:20:24.093689 [ 1051.436816] xen-blkback: backend/vbd/6/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 17:20:24.681745 [ 1051.509203] xen-blkback: backend/vbd/6/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 17:20:24.765647 (XEN) common/grant_table.c:1909:d6v3 Expanding d6 grant table from 1 to 2 frames Oct 3 17:20:24.849792 (XEN) common/grant_table.c:1909:d6v3 Expanding d6 grant table from 2 to 3 frames Oct 3 17:20:24.849830 [ 1051.668432] vif vif-6-0 vif6.0: Guest Rx ready Oct 3 17:20:24.909678 [ 1051.672407] IPv6: ADDRCONF(NETDEV_CHANGE): vif6.0: link becomes ready Oct 3 17:20:24.921683 [ 1051.678726] xenbr0: port 2(vif6.0) entered blocking state Oct 3 17:20:24.921717 [ 1051.683534] xenbr0: port 2(vif6.0) entered forwarding state Oct 3 17:20:24.933990 (XEN) common/grant_table.c:1909:d6v2 Expanding d6 grant table from 3 to 4 frames Oct 3 17:20:43.901720 [ 1101.477365] xenbr0: port 2(vif6.0) entered disabled state Oct 3 17:21:14.721829 [ 1101.723352] xenbr0: port 2(vif6.0) entered disabled state Oct 3 17:21:14.973833 [ 1101.727757] device vif6.0 left promiscuous mode Oct 3 17:21:14.973898 [ 1101.732005] xenbr0: port 2(vif6.0) entered disabled state Oct 3 17:21:14.985714 [ 1128.578489] xenbr0: port 2(vif7.0) entered blocking state Oct 3 17:21:41.825786 [ 1128.582522] xenbr0: port 2(vif7.0) entered disabled state Oct 3 17:21:41.837744 [ 1128.588218] device vif7.0 entered promiscuous mode Oct 3 17:21:41.837807 (XEN) d7v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 17:21:42.921624 (XEN) d7v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:21:42.933614 (XEN) d7v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:21:42.969720 (XEN) d7v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:21:42.993745 (XEN) d7v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:21:43.029707 [ 1130.227475] xen-blkback: backend/vbd/7/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 17:21:43.473770 (XEN) common/grant_table.c:1909:d7v3 Expanding d7 grant table from 1 to 2 frames Oct 3 17:21:43.521744 (XEN) common/grant_table.c:1909:d7v3 Expanding d7 grant table from 2 to 3 frames Oct 3 17:21:43.533670 [ 1130.299591] xen-blkback: backend/vbd/7/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 17:21:43.545745 [ 1130.443860] vif vif-7-0 vif7.0: Guest Rx ready Oct 3 17:21:43.689857 [ 1130.447121] IPv6: ADDRCONF(NETDEV_CHANGE): vif7.0: link becomes ready Oct 3 17:21:43.689923 [ 1130.457386] xenbr0: port 2(vif7.0) entered blocking state Oct 3 17:21:43.701791 [ 1130.464297] xenbr0: port 2(vif7.0) entered forwarding state Oct 3 17:21:43.713750 (XEN) common/grant_table.c:1909:d7v2 Expanding d7 grant table from 3 to 4 frames Oct 3 17:22:02.353839 [ 1180.801411] xenbr0: port 2(vif7.0) entered disabled state Oct 3 17:22:34.049644 [ 1181.043097] xenbr0: port 2(vif7.0) entered disabled state Oct 3 17:22:34.289698 [ 1181.047570] device vif7.0 left promiscuous mode Oct 3 17:22:34.289736 [ 1181.051738] xenbr0: port 2(vif7.0) entered disabled state Oct 3 17:22:34.301638 [ 1207.930313] xenbr0: port 2(vif8.0) entered blocking state Oct 3 17:23:01.181122 [ 1207.934415] xenbr0: port 2(vif8.0) entered disabled state Oct 3 17:23:01.181243 [ 1207.939990] device vif8.0 entered promiscuous mode Oct 3 17:23:01.193015 (XEN) d8v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 17:23:02.269819 (XEN) d8v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:23:02.281758 (XEN) d8v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:23:02.317811 (XEN) d8v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:23:02.353739 (XEN) d8v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:23:02.377838 [ 1209.616519] xen-blkback: backend/vbd/8/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 17:23:02.869726 [ 1209.688009] xen-blkback: backend/vbd/8/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 17:23:02.941781 (XEN) common/grant_table.c:1909:d8v3 Expanding d8 grant table from 1 to 2 frames Oct 3 17:23:02.965862 (XEN) common/grant_table.c:1909:d8v3 Expanding d8 grant table from 2 to 3 frames Oct 3 17:23:02.977696 [ 1209.835894] vif vif-8-0 vif8.0: Guest Rx ready Oct 3 17:23:03.085614 [ 1209.840024] IPv6: ADDRCONF(NETDEV_CHANGE): vif8.0: link becomes ready Oct 3 17:23:03.085649 [ 1209.850976] xenbr0: port 2(vif8.0) entered blocking state Oct 3 17:23:03.097580 [ 1209.860649] xenbr0: port 2(vif8.0) entered forwarding state Oct 3 17:23:03.109580 (XEN) common/grant_table.c:1909:d8v3 Expanding d8 grant table from 3 to 4 frames Oct 3 17:23:21.637795 [ 1258.773248] xenbr0: port 2(vif8.0) entered disabled state Oct 3 17:23:52.017954 [ 1259.053327] xenbr0: port 2(vif8.0) entered disabled state Oct 3 17:23:52.301605 [ 1259.057957] device vif8.0 left promiscuous mode Oct 3 17:23:52.301605 [ 1259.061981] xenbr0: port 2(vif8.0) entered disabled state Oct 3 17:23:52.313515 [ 1285.955209] xenbr0: port 2(vif9.0) entered blocking state Oct 3 17:24:19.196850 [ 1285.959266] xenbr0: port 2(vif9.0) entered disabled state Oct 3 17:24:19.208861 [ 1285.964931] device vif9.0 entered promiscuous mode Oct 3 17:24:19.208861 (XEN) d9v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 17:24:20.292771 (XEN) d9v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:24:20.304757 (XEN) d9v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:24:20.340785 (XEN) d9v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:24:20.364773 (XEN) d9v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:24:20.400815 [ 1287.708847] xen-blkback: backend/vbd/9/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 17:24:20.960949 [ 1287.778204] xen-blkback: backend/vbd/9/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 17:24:21.032838 (XEN) common/grant_table.c:1909:d9v1 Expanding d9 grant table from 1 to 2 frames Oct 3 17:24:21.068829 (XEN) common/grant_table.c:1909:d9v1 Expanding d9 grant table from 2 to 3 frames Oct 3 17:24:21.068829 [ 1287.924030] vif vif-9-0 vif9.0: Guest Rx ready Oct 3 17:24:21.164771 [ 1287.927675] IPv6: ADDRCONF(NETDEV_CHANGE): vif9.0: link becomes ready Oct 3 17:24:21.176823 [ 1287.933838] xenbr0: port 2(vif9.0) entered blocking state Oct 3 17:24:21.188809 [ 1287.941796] xenbr0: port 2(vif9.0) entered forwarding state Oct 3 17:24:21.188809 (XEN) common/grant_table.c:1909:d9v0 Expanding d9 grant table from 3 to 4 frames Oct 3 17:24:41.421652 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 17:25:08.185739 [ 1338.410438] xenbr0: port 2(vif9.0) entered disabled state Oct 3 17:25:11.653770 [ 1338.683222] xenbr0: port 2(vif9.0) entered disabled state Oct 3 17:25:11.929760 [ 1338.689691] device vif9.0 left promiscuous mode Oct 3 17:25:11.929823 [ 1338.692963] xenbr0: port 2(vif9.0) entered disabled state Oct 3 17:25:11.941946 [ 1365.583662] xenbr0: port 2(vif10.0) entered blocking state Oct 3 17:25:38.829688 [ 1365.587785] xenbr0: port 2(vif10.0) entered disabled state Oct 3 17:25:38.841669 [ 1365.593577] device vif10.0 entered promiscuous mode Oct 3 17:25:38.841669 (XEN) d10v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 17:25:39.909777 (XEN) d10v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:25:39.933773 (XEN) d10v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:25:39.969754 (XEN) d10v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:25:39.993771 (XEN) d10v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:25:40.017823 [ 1367.386616] xen-blkback: backend/vbd/10/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 17:25:40.641764 [ 1367.508246] xen-blkback: backend/vbd/10/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 17:25:40.761846 (XEN) common/grant_table.c:1909:d10v3 Expanding d10 grant table from 1 to 2 frames Oct 3 17:25:40.833795 (XEN) common/grant_table.c:1909:d10v3 Expanding d10 grant table from 2 to 3 frames Oct 3 17:25:40.845688 [ 1367.726765] vif vif-10-0 vif10.0: Guest Rx ready Oct 3 17:25:40.977671 [ 1367.734332] IPv6: ADDRCONF(NETDEV_CHANGE): vif10.0: link becomes ready Oct 3 17:25:40.977688 [ 1367.741461] xenbr0: port 2(vif10.0) entered blocking state Oct 3 17:25:40.989635 [ 1367.745660] xenbr0: port 2(vif10.0) entered forwarding state Oct 3 17:25:40.989663 (XEN) common/grant_table.c:1909:d10v3 Expanding d10 grant table from 3 to 4 frames Oct 3 17:25:59.508964 [ 1418.292364] xenbr0: port 2(vif10.0) entered disabled state Oct 3 17:26:31.541609 [ 1418.535057] xenbr0: port 2(vif10.0) entered disabled state Oct 3 17:26:31.789940 [ 1418.545779] device vif10.0 left promiscuous mode Oct 3 17:26:31.790014 [ 1418.549049] xenbr0: port 2(vif10.0) entered disabled state Oct 3 17:26:31.805692 [ 1453.025470] xenbr0: port 2(vif11.0) entered blocking state Oct 3 17:27:06.268821 [ 1453.029611] xenbr0: port 2(vif11.0) entered disabled state Oct 3 17:27:06.280979 [ 1453.035405] device vif11.0 entered promiscuous mode Oct 3 17:27:06.280979 (XEN) d11v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 17:27:07.356761 (XEN) d11v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:27:07.368821 (XEN) d11v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:27:07.404993 (XEN) d11v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:27:07.440815 (XEN) d11v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:27:07.464748 [ 1454.774639] xen-blkback: backend/vbd/11/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 17:27:08.028788 [ 1454.859165] xen-blkback: backend/vbd/11/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 17:27:08.112733 (XEN) common/grant_table.c:1909:d11v0 Expanding d11 grant table from 1 to 2 frames Oct 3 17:27:08.220802 (XEN) common/grant_table.c:1909:d11v0 Expanding d11 grant table from 2 to 3 frames Oct 3 17:27:08.232739 [ 1455.096039] vif vif-11-0 vif11.0: Guest Rx ready Oct 3 17:27:08.344871 [ 1455.103558] IPv6: ADDRCONF(NETDEV_CHANGE): vif11.0: link becomes ready Oct 3 17:27:08.356799 [ 1455.111770] xenbr0: port 2(vif11.0) entered blocking state Oct 3 17:27:08.356799 [ 1455.120035] xenbr0: port 2(vif11.0) entered forwarding state Oct 3 17:27:08.368804 (XEN) common/grant_table.c:1909:d11v0 Expanding d11 grant table from 3 to 4 frames Oct 3 17:27:27.228791 [ 1504.266094] xenbr0: port 2(vif11.0) entered disabled state Oct 3 17:27:57.509059 [ 1504.543462] xenbr0: port 2(vif11.0) entered disabled state Oct 3 17:27:57.788940 [ 1504.548246] device vif11.0 left promiscuous mode Oct 3 17:27:57.788940 [ 1504.552292] xenbr0: port 2(vif11.0) entered disabled state Oct 3 17:27:57.800888 [ 1532.370626] xenbr0: port 2(vif12.0) entered blocking state Oct 3 17:28:25.613855 [ 1532.374836] xenbr0: port 2(vif12.0) entered disabled state Oct 3 17:28:25.625774 [ 1532.380467] device vif12.0 entered promiscuous mode Oct 3 17:28:25.625837 (XEN) d12v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 17:28:26.705783 (XEN) d12v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:28:26.717741 (XEN) d12v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:28:26.753728 (XEN) d12v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:28:26.777772 (XEN) d12v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:28:26.813749 [ 1534.054018] xen-blkback: backend/vbd/12/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 17:28:27.305905 [ 1534.114867] xen-blkback: backend/vbd/12/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Oct 3 17:28:27.365798 (XEN) common/grant_table.c:1909:d12v1 Expanding d12 grant table from 1 to 2 frames Oct 3 17:28:27.377836 (XEN) common/grant_table.c:1909:d12v1 Expanding d12 grant table from 2 to 3 frames Oct 3 17:28:27.389638 [ 1534.228433] vif vif-12-0 vif12.0: Guest Rx ready Oct 3 17:28:27.473903 [ 1534.236006] IPv6: ADDRCONF(NETDEV_CHANGE): vif12.0: link becomes ready Oct 3 17:28:27.485831 [ 1534.245121] xenbr0: port 2(vif12.0) entered blocking state Oct 3 17:28:27.485890 [ 1534.250516] xenbr0: port 2(vif12.0) entered forwarding state Oct 3 17:28:27.497906 (XEN) common/grant_table.c:1909:d12v3 Expanding d12 grant table from 3 to 4 frames Oct 3 17:28:46.165703 [ 1584.057637] xenbr0: port 2(vif12.0) entered disabled state Oct 3 17:29:17.301639 [ 1584.183365] xenbr0: port 2(vif12.0) entered disabled state Oct 3 17:29:17.433651 [ 1584.188175] device vif12.0 left promiscuous mode Oct 3 17:29:17.433651 [ 1584.192192] xenbr0: port 2(vif12.0) entered disabled state Oct 3 17:29:17.433651 Oct 3 17:29:38.093846 (XEN) *** Serial input to Xen (type 'CTRL-x' three times to switch input) Oct 3 17:29:38.113834 Oct 3 17:29:38.115131 Oct 3 17:29:39.109730 (XEN) '0' pressed -> dumping Dom0's registers Oct 3 17:29:39.133720 (XEN) *** Dumping Dom0 vcpu#0 state: *** Oct 3 17:29:39.133754 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Oct 3 17:29:39.136386 Not tainted ]---- Oct 3 17:29:39.145708 (XEN) CPU: 0 Oct 3 17:29:39.145762 (XEN) PC: c031ce28 Oct 3 17:29:39.145804 (XEN) CPSR: 600f0093 MODE:32-bit Guest SVC Oct 3 17:29:39.145850 (XEN) R0: 00000005 R1: 00000000 R2: 00499df9 R3: c031ce20 Oct 3 17:29:39.157705 (XEN) R4: c1909d80 R5: c1b12200 R6: c1904d1c R7: c1904d78 Oct 3 17:29:39.157705 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c00 Oct 3 17:29:39.169623 (XEN) USR: SP: befcb970 LR: b6df46c5 Oct 3 17:29:39.169623 (XEN) SVC: SP: c1901f40 LR: c0308df0 SPSR:600f0013 Oct 3 17:29:39.169623 (XEN) ABT: SP: c1b22b10 LR: c0300ea0 SPSR:600f0193 Oct 3 17:29:39.181665 (XEN) UND: SP: c1b22b20 LR: c0300fa0 SPSR:60030093 Oct 3 17:29:39.181665 (XEN) IRQ: SP: c1b22b00 LR: c0300ba0 SPSR:600f0193 Oct 3 17:29:39.193698 (XEN) FIQ: SP: c1b22b30 LR: c1b22b30 SPSR:00000000 Oct 3 17:29:39.193744 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 17:29:39.193771 (XEN) Oct 3 17:29:39.205695 (XEN) SCTLR: 10c5387d Oct 3 17:29:39.205726 (XEN) TCR: 00000000 Oct 3 17:29:39.205750 (XEN) TTBR0: 00000000650d406a Oct 3 17:29:39.205774 (XEN) TTBR1: 000000006020406a Oct 3 17:29:39.205797 (XEN) IFAR: b6eda478, IFSR: 00000007 Oct 3 17:29:39.217714 (XEN) DFAR: 005c0318, DFSR: 0000081f Oct 3 17:29:39.217746 (XEN) Oct 3 17:29:39.217768 (XEN) VTCR_EL2: 80003558 Oct 3 17:29:39.217791 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 17:29:39.229758 (XEN) Oct 3 17:29:39.229811 (XEN) SCTLR_EL2: 30cd187f Oct 3 17:29:39.229855 (XEN) HCR_EL2: 007c663f Oct 3 17:29:39.229897 (XEN) TTBR0_EL2: 000000004110e000 Oct 3 17:29:39.229939 (XEN) Oct 3 17:29:39.229977 (XEN) ESR_EL2: 07e00000 Oct 3 17:29:39.241771 (XEN) HPFAR_EL2: 00104810 Oct 3 17:29:39.241828 (XEN) HDFAR: e0807f00 Oct 3 17:29:39.241871 (XEN) HIFAR: c09f6d20 Oct 3 17:29:39.241913 (XEN) Oct 3 17:29:39.241951 (XEN) Guest stack trace from sp=c1901f40: Oct 3 17:29:39.253708 (XEN) Failed to convert stack to physical address Oct 3 17:29:39.253741 (XEN) *** Dumping Dom0 vcpu#1 state: *** Oct 3 17:29:39.253767 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 17:29:39.265699 (XEN) CPU: 0 Oct 3 17:29:39.265729 (XEN) PC: c031ce28 Oct 3 17:29:39.265752 (XEN) CPSR: 60070093 MODE:32-bit Guest SVC Oct 3 17:29:39.265777 (XEN) R0: 00000005 R1: 00000000 R2: 003d6db1 R3: c031ce20 Oct 3 17:29:39.277793 (XEN) R4: c210e600 R5: c1b12200 R6: c1904d1c R7: c1904d78 Oct 3 17:29:39.277854 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c00 Oct 3 17:29:39.289740 (XEN) USR: SP: befd06d0 LR: b6f076c5 Oct 3 17:29:39.289798 (XEN) SVC: SP: e08c9f90 LR: c0308df0 SPSR:60070013 Oct 3 17:29:39.289844 (XEN) ABT: SP: c1b22b50 LR: c03011c0 SPSR:600d0193 Oct 3 17:29:39.301785 (XEN) UND: SP: c1b22b60 LR: c0300fa0 SPSR:60070093 Oct 3 17:29:39.301846 (XEN) IRQ: SP: c1b22b40 LR: c0300ba0 SPSR:60070193 Oct 3 17:29:39.313841 (XEN) FIQ: SP: c1b22b70 LR: c1b22b70 SPSR:00000000 Oct 3 17:29:39.313841 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 17:29:39.325775 (XEN) Oct 3 17:29:39.325832 (XEN) SCTLR: 10c5387d Oct 3 17:29:39.325877 (XEN) TCR: 00000000 Oct 3 17:29:39.325918 (XEN) TTBR0: 0000000063bb006a Oct 3 17:29:39.325961 (XEN) TTBR1: 000000006020406a Oct 3 17:29:39.337770 (XEN) IFAR: b6dbe814, IFSR: 00000007 Oct 3 17:29:39.337830 (XEN) DFAR: b6aae73b, DFSR: 00000017 Oct 3 17:29:39.337875 (XEN) Oct 3 17:29:39.337914 (XEN) VTCR_EL2: 80003558 Oct 3 17:29:39.337956 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 17:29:39.349777 (XEN) Oct 3 17:29:39.349829 (XEN) SCTLR_EL2: 30cd187f Oct 3 17:29:39.349901 (XEN) HCR_EL2: 007c663f Oct 3 17:29:39.349946 (XEN) TTBR0_EL2: 000000004110e000 Oct 3 17:29:39.349990 (XEN) Oct 3 17:29:39.350028 (XEN) ESR_EL2: 07e00000 Oct 3 17:29:39.361783 (XEN) HPFAR_EL2: 00104810 Oct 3 17:29:39.361840 (XEN) HDFAR: e0807f00 Oct 3 17:29:39.361883 (XEN) HIFAR: c09f6d20 Oct 3 17:29:39.361925 (XEN) Oct 3 17:29:39.361963 (XEN) Guest stack trace from sp=e08c9f90: Oct 3 17:29:39.373650 (XEN) Failed to convert stack to physical address Oct 3 17:29:39.373683 Oct 3 17:29:41.092906 (XEN) 'H' pressed -> dumping heap info (now = 1613152548333) Oct 3 17:29:41.113850 (XEN) heap[node=0][zone=0] -> 16271 pages Oct 3 17:29:41.113910 (XEN) heap[node=0][zone=1] -> 0 Oct 3 17:29:41.116239 pages Oct 3 17:29:41.125759 (XEN) heap[node=0][zone=2] -> 0 pages Oct 3 17:29:41.125819 (XEN) heap[node=0][zone=3] -> 0 pages Oct 3 17:29:41.125863 (XEN) heap[node=0][zone=4] -> 0 pages Oct 3 17:29:41.125906 (XEN) heap[node=0][zone=5] -> 0 pages Oct 3 17:29:41.137830 (XEN) heap[node=0][zone=6] -> 0 pages Oct 3 17:29:41.137888 (XEN) heap[node=0][zone=7] -> 0 pages Oct 3 17:29:41.137933 (XEN) heap[node=0][zone=8] -> 0 pages Oct 3 17:29:41.149784 (XEN) heap[node=0][zone=9] -> 0 pages Oct 3 17:29:41.149843 (XEN) heap[node=0][zone=10] -> 0 pages Oct 3 17:29:41.149889 (XEN) heap[node=0][zone=11] -> 0 pages Oct 3 17:29:41.149932 (XEN) heap[node=0][zone=12] -> 0 pages Oct 3 17:29:41.161770 (XEN) heap[node=0][zone=13] -> 0 pages Oct 3 17:29:41.161828 (XEN) heap[node=0][zone=14] -> 0 pages Oct 3 17:29:41.161872 (XEN) heap[node=0][zone=15] -> 0 pages Oct 3 17:29:41.173852 (XEN) heap[node=0][zone=16] -> 0 pages Oct 3 17:29:41.173912 (XEN) heap[node=0][zone=17] -> 0 pages Oct 3 17:29:41.173957 (XEN) heap[node=0][zone=18] -> 0 pages Oct 3 17:29:41.174000 (XEN) heap[node=0][zone=19] -> 130835 pages Oct 3 17:29:41.185793 (XEN) heap[node=0][zone=20] -> 241605 pages Oct 3 17:29:41.185853 (XEN) heap[node=0][zone=21] -> 0 pages Oct 3 17:29:41.185897 (XEN) heap[node=0][zone=22] -> 0 pages Oct 3 17:29:41.197757 (XEN) heap[node=0][zone=23] -> 0 pages Oct 3 17:29:41.197822 (XEN) heap[node=0][zone=24] -> 0 pages Oct 3 17:29:41.197866 (XEN) heap[node=0][zone=25] -> 0 pages Oct 3 17:29:41.209742 (XEN) heap[node=0][zone=26] -> 0 pages Oct 3 17:29:41.209801 (XEN) heap[node=0][zone=27] -> 0 pages Oct 3 17:29:41.209846 (XEN) heap[node=0][zone=28] -> 0 pages Oct 3 17:29:41.209889 Oct 3 17:29:43.111871 Oct 3 17:29:44.885477 Oct 3 17:29:45.106532 Oct 3 17:29:46.892341 Oct 3 17:29:47.095690 (XEN) Dumping timer queues: Oct 3 17:29:47.113844 (XEN) CPU00: Oct 3 17:29:47.113927 (XEN) ex= 30330us timer=43fee968 cb=vtimer.c#virt_timer_expired(43fee960) Oct 3 17:29:47.113988 (XEN) CPU0 Oct 3 17:29:47.116268 1: Oct 3 17:29:47.125675 (XEN) ex= 280330us timer=43fdc968 cb=vtimer.c#virt_timer_expired(43fdc960) Oct 3 17:29:47.125740 Oct 3 17:29:49.101207 Oct 3 17:29:50.904167 Oct 3 17:29:51.145024 (XEN) 'd' pressed -> dumping registers Oct 3 17:29:51.169847 (XEN) Oct 3 17:29:51.169847 (XEN) *** Dumping CPU0 host state: *** Oct 3 17:29:51.169847 (XEN) ----[ Xen-4.20-unstable arm32 debug=y N Oct 3 17:29:51.171648 ot tainted ]---- Oct 3 17:29:51.181664 (XEN) CPU: 0 Oct 3 17:29:51.181664 (XEN) PC: 0025f53c domain.c#idle_loop+0x130/0x1ac Oct 3 17:29:51.181664 (XEN) CPSR: 6007005a MODE:Hypervisor Oct 3 17:29:51.181664 (XEN) R0: 00000000 R1: 00000001 R2: 00000000 R3: 00000000 Oct 3 17:29:51.193817 (XEN) R4: 00000000 R5: 003000e0 R6: 00331324 R7: 00000001 Oct 3 17:29:51.193817 (XEN) R8: 00331104 R9: 00000000 R10:40e00000 R11:4003ff54 R12:fffffffc Oct 3 17:29:51.205658 (XEN) HYP: SP: 4003ff44 LR: 00225b7c Oct 3 17:29:51.205658 (XEN) Oct 3 17:29:51.205658 (XEN) VTCR_EL2: 80003558 Oct 3 17:29:51.205852 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 17:29:51.217682 (XEN) Oct 3 17:29:51.217693 (XEN) SCTLR_EL2: 30cd187f Oct 3 17:29:51.217693 (XEN) HCR_EL2: 007c663f Oct 3 17:29:51.217693 (XEN) TTBR0_EL2: 000000004110e000 Oct 3 17:29:51.217693 (XEN) Oct 3 17:29:51.217693 (XEN) ESR_EL2: 07e00000 Oct 3 17:29:51.229653 (XEN) HPFAR_EL2: 00104810 Oct 3 17:29:51.229653 (XEN) HDFAR: e0807f00 Oct 3 17:29:51.229653 (XEN) HIFAR: c09f6d20 Oct 3 17:29:51.229653 (XEN) Oct 3 17:29:51.229653 (XEN) Xen stack trace from sp=4003ff44: Oct 3 17:29:51.241799 (XEN) 07e00000 00295014 002919b8 4003ff4c 002678fc 00000000 00000000 00000000 Oct 3 17:29:51.241871 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 17:29:51.253759 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 17:29:51.253821 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 17:29:51.265763 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 17:29:51.277734 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 17:29:51.277795 (XEN) Xen call trace: Oct 3 17:29:51.277843 (XEN) [<0025f53c>] domain.c#idle_loop+0x130/0x1ac (PC) Oct 3 17:29:51.289745 (XEN) [<00225b7c>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 17:29:51.289745 (XEN) [<002678fc>] arch_get_xen_caps+0/0x90 Oct 3 17:29:51.289745 (XEN) Oct 3 17:29:51.301750 (XEN) *** Dumping CPU1 host state: *** Oct 3 17:29:51.301814 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 17:29:51.301863 (XEN) CPU: 1 Oct 3 17:29:51.301903 (XEN) PC: 0025f53c domain.c#idle_loop+0x130/0x1ac Oct 3 17:29:51.313757 (XEN) CPSR: 600f005a MODE:Hypervisor Oct 3 17:29:51.313816 (XEN) R0: 00000000 R1: 00000001 R2: 3fd06000 R3: 00000000 Oct 3 17:29:51.325750 (XEN) R4: 00000001 R5: 003000e0 R6: 00331324 R7: 00000002 Oct 3 17:29:51.325750 (XEN) R8: 00331104 R9: 00000001 R10:40e00000 R11:4000ff54 R12:fffffffc Oct 3 17:29:51.337801 (XEN) HYP: SP: 4000ff44 LR: 00225b7c Oct 3 17:29:51.337889 (XEN) Oct 3 17:29:51.337944 (XEN) VTCR_EL2: 80003558 Oct 3 17:29:51.338009 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 17:29:51.338067 (XEN) Oct 3 17:29:51.338123 (XEN) SCTLR_EL2: 30cd187f Oct 3 17:29:51.349753 (XEN) HCR_EL2: 007c663f Oct 3 17:29:51.349809 (XEN) TTBR0_EL2: 00000000ba004000 Oct 3 17:29:51.349854 (XEN) Oct 3 17:29:51.349893 (XEN) ESR_EL2: 07e00000 Oct 3 17:29:51.349934 (XEN) HPFAR_EL2: 00104810 Oct 3 17:29:51.361759 (XEN) HDFAR: e0807f00 Oct 3 17:29:51.361815 (XEN) HIFAR: 4031c394 Oct 3 17:29:51.361859 (XEN) Oct 3 17:29:51.361898 (XEN) Xen stack trace from sp=4000ff44: Oct 3 17:29:51.361942 (XEN) 07e00000 00301290 00000001 4000ff3c 002681e0 00000000 00000000 00000000 Oct 3 17:29:51.373814 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 17:29:51.385752 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 17:29:51.385815 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 17:29:51.397732 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 17:29:51.397794 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 17:29:51.409766 (XEN) Xen call trace: Oct 3 17:29:51.409821 (XEN) [<0025f53c>] domain.c#idle_loop+0x130/0x1ac (PC) Oct 3 17:29:51.409871 (XEN) [<00225b7c>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 17:29:51.421757 (XEN) [<002681e0>] start_secondary+0x204/0x20c Oct 3 17:29:51.421843 (XEN) Oct 3 17:29:51.421885 Oct 3 17:29:53.149115 (XEN) 'e' pressed -> dumping event-channel info Oct 3 17:29:53.173767 (XEN) Event channel information for domain 0: Oct 3 17:29:53.173824 (XEN) Polling vCPUs: {} Oct 3 17:29:53.173867 (XEN) port Oct 3 17:29:53.176021 [p/m/s] Oct 3 17:29:53.185734 (XEN) 1 [0/0/ - ]: s=3 n=1 x=0 d=0 p=4 Oct 3 17:29:53.185790 (XEN) 2 [0/0/ - ]: s=5 n=0 x=0 v=2 Oct 3 17:29:53.185836 (XEN) 3 [0/0/ - ]: s=5 n=1 x=0 v=3 Oct 3 17:29:53.197663 (XEN) 4 [0/0/ - ]: s=3 n=0 x=0 d=0 p=1 Oct 3 17:29:53.197691 (XEN) 5 [0/0/ - ]: s=3 n=1 x=0 d=0 p=6 Oct 3 17:29:53.197716 (XEN) 6 [0/0/ - ]: s=3 n=0 x=0 d=0 p=5 Oct 3 17:29:53.209663 Oct 3 17:29:55.154975 (XEN) gnttab_usage_print_all [ key 'g' pressed Oct 3 17:29:55.169795 (XEN) -------- active -------- -------- shared -------- Oct 3 17:29:55.169795 (XEN) [ref] localdo Oct 3 17:29:55.171894 m mfn pin localdom gmfn flags Oct 3 17:29:55.181616 (XEN) grant-table for remote d0 (v1) Oct 3 17:29:55.181616 (XEN) 2 frames (64 max), 5 maptrack frames (1024 max) Oct 3 17:29:55.193756 (XEN) [0x208] 0 0x6498d 0x00000001 0 0x06498d 0x19 Oct 3 17:29:55.193823 (XEN) [0x209] 0 0x6498e 0x00000001 0 0x06498e 0x19 Oct 3 17:29:55.193871 (XEN) gnttab_usage_print_all ] done Oct 3 17:29:55.205709 Oct 3 17:29:57.139531 Oct 3 17:29:58.917869 Oct 3 17:29:59.125677 (XEN) Physical memory information: Oct 3 17:29:59.141764 (XEN) Xen heap: 65084kB free Oct 3 17:29:59.141834 (XEN) heap[19]: 523340kB free Oct 3 17:29:59.141878 (XEN) heap[20]: 966420kB fr Oct 3 17:29:59.143331 ee Oct 3 17:29:59.153662 (XEN) Dom heap: 1489760kB free Oct 3 17:29:59.153719 Oct 3 17:30:01.156063 Oct 3 17:30:02.922856 Oct 3 17:30:03.120560 (XEN) sched_smt_power_savings: disabled Oct 3 17:30:03.141674 (XEN) NOW=1635180706625 Oct 3 17:30:03.141707 (XEN) Online Cpus: 0-1 Oct 3 17:30:03.141731 (XEN) Cpupool 0: Oct 3 17:30:03.141754 (XEN) Cpus: 0-1 Oct 3 17:30:03.141776 (XEN) Sched Oct 3 17:30:03.149568 uling granularity: cpu, 1 CPU per sched-resource Oct 3 17:30:03.153583 (XEN) Scheduler: SMP RTDS Scheduler (rtds) Oct 3 17:30:03.153614 (XEN) Global RunQueue info: Oct 3 17:30:03.153639 (XEN) [ 0.0 ] cpu 0, (10000000, 4000000), cur_b=4000000 cur_d=1635190000000 last_start=1635182802291 Oct 3 17:30:03.165684 (XEN) priority_level=0 has_extratime=1 Oct 3 17:30:03.165715 (XEN) onQ=1 runnable=1 flags=10 effective hard_affinity=0-1 Oct 3 17:30:03.177628 (XEN) Global DepletedQueue info: Oct 3 17:30:03.177657 (XEN) Global Replenishment Events info: Oct 3 17:30:03.177682 (XEN) [ 0.0 ] cpu 0, (10000000, 4000000), cur_b=4000000 cur_d=1635190000000 last_start=1635182802291 Oct 3 17:30:03.189671 (XEN) priority_level=0 has_extratime=1 Oct 3 17:30:03.201628 (XEN) onQ=1 runnable=1 flags=10 effective hard_affinity=0-1 Oct 3 17:30:03.201660 (XEN) Domain info: Oct 3 17:30:03.201683 (XEN) domain: 0 Oct 3 17:30:03.201706 (XEN) [ 0.0 ] cpu 0, (10000000, 4000000), cur_b=4000000 cur_d=1635190000000 last_start=1635182802291 Oct 3 17:30:03.213650 (XEN) priority_level=0 has_extratime=1 Oct 3 17:30:03.213679 (XEN) onQ=1 runnable=1 flags=10 effective hard_affinity=0-1 Oct 3 17:30:03.225649 (XEN) [ 0.1 ] cpu 1, (10000000, 4000000), cur_b=3883250 cur_d=1635170000000 last_start=1635163746250 Oct 3 17:30:03.237655 (XEN) priority_level=0 has_extratime=1 Oct 3 17:30:03.237689 (XEN) onQ=0 runnable=0 flags=10 effective hard_affinity=0-1 Oct 3 17:30:03.237716 (XEN) CPUs info: Oct 3 17:30:03.249668 (XEN) CPU[00] current=d[IDLE]v0, curr=d[IDLE]v0, prev=NULL Oct 3 17:30:03.249699 (XEN) CPU[00] Oct 3 17:30:03.249721 (XEN) CPU[01] current=d[IDLE]v1, curr=d[IDLE]v1, prev=NULL Oct 3 17:30:03.261574 (XEN) CPU[01] Oct 3 17:30:03.261601 Oct 3 17:30:05.121737 Oct 3 17:30:06.934895 Oct 3 17:30:07.133575 (XEN) Synced stime skew: max=83ns avg=83ns samples=1 current=83ns Oct 3 17:30:07.157726 (XEN) Synced cycles skew: max=3 avg=3 samples=1 current=3 Oct 3 17:30:07.157759 Oct 3 17:30:07.159475 Oct 3 17:30:09.193941 Oct 3 17:30:10.940267 Oct 3 17:30:11.172569 Oct 3 17:30:12.946629 Oct 3 17:30:13.192789 Oct 3 17:30:14.952830 Oct 3 17:30:25.194636 (XEN) 'q' pressed -> dumping domain info (now = 1657252941875) Oct 3 17:30:25.216968 (XEN) General information for domain 0: Oct 3 17:30:25.216968 (XEN) refcnt=3 dying=0 paus Oct 3 17:30:25.218315 e_count=0 Oct 3 17:30:25.228828 (XEN) nr_pages=131072 xenheap_pages=3 dirty_cpus={} max_pages=131072 Oct 3 17:30:25.228828 (XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=00000020 Oct 3 17:30:25.240806 (XEN) p2m mappings for domain 0 (vmid 1): Oct 3 17:30:25.240806 (XEN) 1G mappings: 0 (shattered 0) Oct 3 17:30:25.240806 (XEN) 2M mappings: 233 (shattered 23) Oct 3 17:30:25.252786 (XEN) 4K mappings: 6810 Oct 3 17:30:25.252786 (XEN) Rangesets belonging to domain 0: Oct 3 17:30:25.252786 (XEN) Interrupts { 32-72, 74, 77-79, 82-84, 86, 88-100, 103-104, 107-110, 114, 116-120, 123, 126-128, 138, 144, 146-147, 149-151, 156 } Oct 3 17:30:25.261761 (XEN) I/O Memory { 2020-2050, 3810-3811, 3830-3831, 3860-3861, 10000-10001, 10010-10045, 10050-10055, 10060-10061, 101b0-101b1, 101d0-101d1, 101e0-101e1, 10440-10441, 10800-10801, 10830-10831, 10850-10851, 10a60-10a61, 10d10-10d11, 11000-11010, 11200-11201, 11210-11211, 11400-11401, 11800-11805, 11c00-11c01, 11c10-11c11, 11d40-11d41, 11f20-11f21, 12000-12010, 12100-12101, 12110-12111, 12120-12121, 12130-12131, 12170-12171, 121a0-121a1, 121b0-121b1, 121d0-121d1, 12200-12201, 12210-12211, 12220-12221, 12230-12231, 12250-12251, 122f0-122f1, 12c00-12c01, 12c10-12c11, 12c30-12c31, 12c60-12c61, 12c70-12c71, 12c80-12c81, 12c90-12c91, 12ca0-12ca1, 12cb0-12cb1, 12cc0-12cc1, 12cd0-12cd1, 12ce0-12ce1, 12d10-12d11, 12d20-12d21, 12d30-12d31, 12d40-12d41, 12d60-12d61, 12d70-12d71, 12dd0-12dd1, 13260-13261, 13270-13271, 13280-13281, 13290-13291, 132a0-132a1, 132b0-132b1, 132c0-132c1, 132d0-132d1, 132e0-132e1, 132f0-132f1, 13400-13401, 13c40-13c41, 13c50-13c51, 13e00-13e01, 13e10-13e11, 13e20-13e21, 13e30-13e31, 13e80-13e81, 13e90-13e91, 13ea0-13ea1, 13eb0-13eb1, 14400-14440, 14450-14460, 14500-14510, 14530-145a0, 145b0-145b1, 14640-14641, 14650-14651 } Oct 3 17:30:25.361132 (XEN) NODE affinity for domain 0: [0] Oct 3 17:30:25.373095 (XEN) VCPU information and callbacks for domain 0: Oct 3 17:30:25.373156 (XEN) UNIT0 affinities: hard={0-1} soft={0-1} Oct 3 17:30:25.373204 (XEN) VCPU0: CPU0 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 17:30:25.385075 (XEN) pause_count=0 pause_flags=0 Oct 3 17:30:25.385133 (XEN) GICH_LRs (vcpu 0) mask=0 Oct 3 17:30:25.385187 (XEN) VCPU_LR[0]=0 Oct 3 17:30:25.397107 (XEN) VCPU_LR[1]=0 Oct 3 17:30:25.397170 (XEN) VCPU_LR[2]=0 Oct 3 17:30:25.397213 (XEN) VCPU_LR[3]=0 Oct 3 17:30:25.397290 (XEN) No periodic timer Oct 3 17:30:25.397316 (XEN) UNIT1 affinities: hard={0-1} soft={0-1} Oct 3 17:30:25.409015 (XEN) VCPU1: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 17:30:25.409090 (XEN) pause_count=0 pause_flags=1 Oct 3 17:30:25.409136 (XEN) GICH_LRs (vcpu 1) mask=0 Oct 3 17:30:25.421038 (XEN) VCPU_LR[0]=0 Oct 3 17:30:25.421097 (XEN) VCPU_LR[1]=0 Oct 3 17:30:25.421140 (XEN) VCPU_LR[2]=0 Oct 3 17:30:25.421181 (XEN) VCPU_LR[3]=0 Oct 3 17:30:25.421276 (XEN) No periodic timer Oct 3 17:30:25.433036 (XEN) Notifying guest 0:0 (virq 1, port 0) Oct 3 17:30:25.433107 (XEN) Notifying guest 0:1 (virq 1, port 0) Oct 3 17:30:25.433153 Oct 3 17:30:37.206310 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 17:30:37.225863 Oct 3 17:30:37.225916 arndale-westfield login: Oct 3 17:30:37.227779 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 17:31:49.189713 [ 1743.476378] vif vif-1: 5 starting transaction Oct 3 17:31:56.713760 [ 1743.479381] vif vif-1: 5 starting transaction Oct 3 17:31:56.713813 [ 1748.552827] xenbus_probe_frontend: xenbus_frontend_dev_shutdown: device/vif/1 timeout closing device Oct 3 17:32:01.801691 [ 1748.560743] sd 0:0:0:0: [sda] Synchronizing SCSI cache Oct 3 17:32:01.802343 [ 1748.571346] wake enabled for irq 119 (gpx1-4) Oct 3 17:32:01.813643 [ 1748.574388] wake enabled for irq 120 (gpx1-5) Oct 3 17:32:01.813676 [ 1748.578763] wake enabled for irq 121 (gpx1-6) Oct 3 17:32:01.813702 [ 1748.583209] wake enabled for irq 122 (gpx1-7) Oct 3 17:32:01.825715 [ 1748.587618] wake enabled for irq 123 (gpx2-0) Oct 3 17:32:01.825748 [ 1748.592043] wake enabled for irq 124 (gpx2-1) Oct 3 17:32:01.837600 [ 1748.596992] reboot: Resô Oct 3 17:32:02.173782 Oct 3 17:32:02.173782 Oct 3 17:32:02.173853 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 17:32:02.173907 Oct 3 17:32:02.173945 CPU: Exynos5250@1000MHz Oct 3 17:32:02.173989 Oct 3 17:32:02.174027 Board: Arndale Oct 3 17:32:02.174068 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 17:32:02.185718 ready Oct 3 17:32:02.185772 DRAM: 2 GiB Oct 3 17:32:02.185815 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 17:32:02.209666 trace: enabled Oct 3 17:32:02.245593 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 17:32:02.605721 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 17:32:02.653683 In: serial Oct 3 17:32:02.665714 Out: serial Oct 3 17:32:02.665770 Err: serial Oct 3 17:32:02.665812 SCSI: ARNDALE SCSI INIT Oct 3 17:32:02.665857 Target spinup took 0 ms. Oct 3 17:32:02.677696 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 17:32:02.677731 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 17:32:02.677759 Net: Net Initialization Skipped Oct 3 17:32:02.689653 No ethernet found. Oct 3 17:32:02.689684 Hostname: arndale-westfield Oct 3 17:32:02.689733 Hit any key to stop autoboot: 2  1  0 Oct 3 17:32:04.609757 (Re)start USB... Oct 3 17:32:04.609834 USB0: USB EHCI 1.00 Oct 3 17:32:04.621705 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 17:32:10.213642 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 17:32:10.225739 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 17:32:10.669795 Waiting for Ethernet connection... done. Oct 3 17:32:12.265652 BOOTP broadcast 1 Oct 3 17:32:12.283054 BOOTP broadcast 2 Oct 3 17:32:13.657773 DHCP client bound to address 10.149.64.45 (1446 ms) Oct 3 17:32:13.657846 Using asx0 device Oct 3 17:32:13.657890 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 17:32:13.669635 Filename 'pxelinux.0'. Oct 3 17:32:13.669666 Load address: 0x43e00000 Oct 3 17:32:13.669690 Loading: *### Oct 3 17:32:13.681593 2.4 MiB/s Oct 3 17:32:13.693637 done Oct 3 17:32:13.693667 Bytes transferred = 42430 (a5be hex) Oct 3 17:32:13.693692 missing environment variable: pxeuuid Oct 3 17:32:13.693716 Retrieving file: pxelinux.cfg/0A95402D Oct 3 17:32:13.693740 Using asx0 device Oct 3 17:32:13.705737 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 17:32:13.705800 Filename 'pxelinux.cfg/0A95402D'. Oct 3 17:32:13.705845 Load address: 0x51000000 Oct 3 17:32:13.717743 Loading: *# Oct 3 17:32:13.717800 710.9 KiB/s Oct 3 17:32:13.717842 done Oct 3 17:32:13.717881 Bytes transferred = 728 (2d8 hex) Oct 3 17:32:13.717925 Config file found Oct 3 17:32:13.717965 Ignoring unknown command: serial Oct 3 17:32:13.718008 1: ^Overwrite Oct 3 17:32:13.729736 Retrieving file: /osstest/tmp//arndale-westfield--initrd.gz Oct 3 17:32:13.729800 Using asx0 device Oct 3 17:32:13.729842 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 17:32:13.741726 Filename '/osstest/tmp//arndale-westfield--initrd.gz'. Oct 3 17:32:13.741788 Load address: 0x43300000 Oct 3 17:32:13.741831 Loading: *################################################################# Oct 3 17:32:14.065591 ################################################################# Oct 3 17:32:14.389678 ################################################################# Oct 3 17:32:14.717706 ################################################################# Oct 3 17:32:15.041685 ################################################################# Oct 3 17:32:15.365691 ################################################################# Oct 3 17:32:15.677714 ################################################################# Oct 3 17:32:16.001677 ################################################################# Oct 3 17:32:16.301583 ################################################################# Oct 3 17:32:16.613586 ################################################################# Oct 3 17:32:16.913675 ################################################################# Oct 3 17:32:17.237722 ################################################################# Oct 3 17:32:17.561746 ################################################################# Oct 3 17:32:17.885596 ################################################################# Oct 3 17:32:18.185582 ################################################################# Oct 3 17:32:18.497581 ################################################################# Oct 3 17:32:18.809600 ################################################################# Oct 3 17:32:19.193629 ################################################################# Oct 3 17:32:19.517613 ################################################################# Oct 3 17:32:19.817690 ################################################################# Oct 3 17:32:20.129654 ################################################################# Oct 3 17:32:20.454179 ################################################################# Oct 3 17:32:20.741692 ################################################################# Oct 3 17:32:21.057702 ################################################################# Oct 3 17:32:21.357712 ################################################################# Oct 3 17:32:21.657605 ################################################################# Oct 3 17:32:21.969701 ################################################################# Oct 3 17:32:22.281783 ######################################## Oct 3 17:32:22.465777 2.8 MiB/s Oct 3 17:32:22.465810 done Oct 3 17:32:22.465862 Bytes transferred = 26339177 (191e769 hex) Oct 3 17:32:22.477767 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/linux Oct 3 17:32:22.489693 Using asx0 device Oct 3 17:32:22.489748 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 17:32:22.489783 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/linux'. Oct 3 17:32:22.501772 Load address: 0x42000000 Oct 3 17:32:22.501824 Loading: *################################################################# Oct 3 17:32:22.825811 ################################################################# Oct 3 17:32:23.149633 ################################################################# Oct 3 17:32:23.461477 ################################################################# Oct 3 17:32:23.777693 ################################################################# Oct 3 17:32:24.089684 ############################################# Oct 3 17:32:24.313586 2.7 MiB/s Oct 3 17:32:24.313691 done Oct 3 17:32:24.313691 Bytes transferred = 5427712 (52d200 hex) Oct 3 17:32:24.313691 append: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=49877 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 17:32:24.349874 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb Oct 3 17:32:24.361769 Using asx0 device Oct 3 17:32:24.361769 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 17:32:24.373758 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb'. Oct 3 17:32:24.373758 Load address: 0x43000000 Oct 3 17:32:24.385716 Loading: *#### Oct 3 17:32:24.397677 2.6 MiB/s Oct 3 17:32:24.397677 done Oct 3 17:32:24.397677 Bytes transferred = 46686 (b65e hex) Oct 3 17:32:24.397677 Kernel image @ 0x42000000 [ 0x000000 - 0x52d200 ] Oct 3 17:32:24.409694 ## Flattened Device Tree blob at 43000000 Oct 3 17:32:24.409694 Booting using the fdt blob at 0x43000000 Oct 3 17:32:24.409694 Loading Ramdisk to 4e6e1000, end 4ffff769 ... OK Oct 3 17:32:24.841664 Loading Device Tree to 4e6d2000, end 4e6e065d ... OK Oct 3 17:32:24.841697 Oct 3 17:32:24.853574 Starting kernel ...(fake run for tracing) Oct 3 17:32:24.853659 Oct 3 17:32:24.853690 Oct 3 17:32:24.853690 Starting kernel ... Oct 3 17:32:24.853690 Oct 3 17:32:24.853690 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 17:32:30.908828 [ 0.000000] Linux version 6.1.0-25-armmp (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.106-3 (2024-08-26) Oct 3 17:32:30.920778 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 17:32:30.932833 [ 0.000000] CPU: div instructions available: patching division code Oct 3 17:32:30.932833 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 17:32:30.944830 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 17:32:30.944830 [ 0.000000] Memory policy: Data cache writealloc Oct 3 17:32:30.956817 [ 0.000000] efi: UEFI not found. Oct 3 17:32:30.956817 [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 Oct 3 17:32:30.956817 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 17:32:30.968829 [ 0.000000] Zone ranges: Oct 3 17:32:30.968829 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 17:32:30.968829 [ 0.000000] Normal empty Oct 3 17:32:30.980827 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 17:32:30.980827 [ 0.000000] Movable zone start for each node Oct 3 17:32:30.992824 [ 0.000000] Early memory node ranges Oct 3 17:32:30.992824 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 17:32:30.992824 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 17:32:31.004828 [ 0.000000] percpu: Embedded 18 pages/cpu s44692 r8192 d20844 u73728 Oct 3 17:32:31.016822 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 17:32:31.016822 [ 0.000000] Kernel command line: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=49877 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 17:32:31.064828 [ 0.000000] Unknown kernel command line parameters "preseed --- vga=normal auto=true hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=49877 domain=test-lab.xenproject.org", will be passed to user space. Oct 3 17:32:31.104826 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 17:32:31.104826 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 17:32:31.116957 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 17:32:31.117030 [ 0.000000] Memory: 2015968K/2097152K available (11264K kernel code, 1696K rwdata, 3724K rodata, 2048K init, 376K bss, 64800K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 17:32:31.140831 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 17:32:31.140831 [ 0.000000] ftrace: allocating 39612 entries in 117 pages Oct 3 17:32:31.152822 [ 0.000000] ftrace: allocated 117 pages with 5 groups Oct 3 17:32:31.152822 [ 0.000000] trace event string verifier disabled Oct 3 17:32:31.162826 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 17:32:31.162894 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 17:32:31.176882 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 17:32:31.176882 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 17:32:31.176882 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 17:32:31.188862 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 17:32:31.188862 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 17:32:31.200864 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 17:32:31.200864 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 17:32:31.212864 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 17:32:31.212864 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 17:32:31.224861 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 17:32:31.236867 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 17:32:31.236867 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 17:32:31.248861 [ 0.002604] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 17:32:31.248861 [ 0.002618] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 17:32:31.260934 [ 0.002633] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 17:32:31.272822 [ 0.002645] Ignoring duplicate/late registration of read_current_timer delay Oct 3 17:32:31.284826 [ 0.003004] Console: colour dummy device 80x30 Oct 3 17:32:31.284826 [ 0.003045] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 17:32:31.296759 [ 0.003059] CPU: Testing write buffer coherency: ok Oct 3 17:32:31.296759 [ 0.003101] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 17:32:31.308844 [ 0.003109] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 17:32:31.308844 [ 0.003116] pid_max: default: 32768 minimum: 301 Oct 3 17:32:31.320999 [ 0.003476] LSM: Security Framework initializing Oct 3 17:32:31.321066 [ 0.003547] landlock: Up and running. Oct 3 17:32:31.332862 [ 0.003552] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 17:32:31.332862 [ 0.003738] AppArmor: AppArmor initialized Oct 3 17:32:31.332862 [ 0.003751] TOMOYO Linux initialized Oct 3 17:32:31.344836 [ 0.003797] LSM support for eBPF active Oct 3 17:32:31.344836 [ 0.004041] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 17:32:31.356847 [ 0.004055] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 17:32:31.356847 [ 0.005493] /cpus/cpu@0 missing clock-frequency property Oct 3 17:32:31.368821 [ 0.005521] /cpus/cpu@1 missing clock-frequency property Oct 3 17:32:31.368821 [ 0.005534] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 17:32:31.380850 [ 0.006478] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 17:32:31.380850 [ 0.006486] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 17:32:31.392862 [ 0.006589] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 17:32:31.392862 [ 0.006595] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 17:32:31.404872 [ 0.006740] Setting up static identity map for 0x40300000 - 0x403000ac Oct 3 17:32:31.404872 [ 0.007894] rcu: Hierarchical SRCU implementation. Oct 3 17:32:31.416837 [ 0.007900] rcu: Max phase no-delay instances is 1000. Oct 3 17:32:31.416837 [ 0.010019] EFI services will not be available. Oct 3 17:32:31.428876 [ 0.010369] smp: Bringing up secondary CPUs ... Oct 3 17:32:31.428876 [ 0.011122] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 17:32:31.428876 [ 0.011135] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 17:32:31.440882 [ 0.011268] smp: Brought up 1 node, 2 CPUs Oct 3 17:32:31.452877 [ 0.011277] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 17:32:31.452877 [ 0.011285] CPU: All CPU(s) started in HYP mode. Oct 3 17:32:31.452877 [ 0.011289] CPU: Virtualization extensions available. Oct 3 17:32:31.464878 [ 0.011917] devtmpfs: initialized Oct 3 17:32:31.464878 [ 0.023346] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 17:32:31.476796 [ 0.023583] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 17:32:31.488882 [ 0.023608] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 17:32:31.488882 [ 0.024132] pinctrl core: initialized pinctrl subsystem Oct 3 17:32:31.500825 [ 0.024827] DMI not present or invalid. Oct 3 17:32:31.500825 [ 0.025503] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 17:32:31.500825 [ 0.030896] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 17:32:31.512873 [ 0.032454] audit: initializing netlink subsys (disabled) Oct 3 17:32:31.512873 [ 0.032660] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 Oct 3 17:32:31.524835 [ 0.033817] thermal_sys: Registered thermal governor 'fair_share' Oct 3 17:32:31.536861 [ 0.033824] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 17:32:31.536861 [ 0.033828] thermal_sys: Registered thermal governor 'step_wise' Oct 3 17:32:31.548870 [ 0.033833] thermal_sys: Registered thermal governor 'user_space' Oct 3 17:32:31.548870 [ 0.033837] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 17:32:31.560845 [ 0.034212] No ATAGs? Oct 3 17:32:31.560845 [ 0.034279] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 17:32:31.572854 [ 0.034288] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 17:32:31.572854 [ 0.035373] Serial: AMBA PL011 UART driver Oct 3 17:32:31.572854 [ 0.084803] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 17:32:31.584834 [ 0.091828] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 17:32:31.596863 [ 0.102679] iommu: Default domain type: Translated Oct 3 17:32:31.596863 [ 0.102687] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 17:32:31.608866 [ 0.103654] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 17:32:31.608866 [ 0.104188] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 17:32:31.620996 [ 0.104200] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 17:32:31.621066 [ 0.104734] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 17:32:31.632885 [ 0.104765] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 17:32:31.644832 [ 0.104947] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 17:32:31.644832 [ 0.105298] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 17:32:31.644832 [ 0.105309] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 17:32:31.656876 [ 0.105701] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 17:32:31.656876 [ 0.105991] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 17:32:31.668875 [ 0.106001] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 17:32:31.668875 [ 0.106280] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 17:32:31.680882 [ 0.106381] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 17:32:31.680882 [ 0.106391] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 17:32:31.680882 [ 0.106591] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 17:32:31.692870 [ 0.106787] pps_core: LinuxPPS API ver. 1 registered Oct 3 17:32:31.692870 [ 0.106793] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 17:32:31.704874 [ 0.106809] PTP clock support registered Oct 3 17:32:31.704874 [ 0.108444] NetLabel: Initializing Oct 3 17:32:31.716875 [ 0.108450] NetLabel: domain hash size = 128 Oct 3 17:32:31.716875 [ 0.108455] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 17:32:31.728861 [ 0.108510] NetLabel: unlabeled traffic allowed by default Oct 3 17:32:31.728861 [ 0.108693] vgaarb: loaded Oct 3 17:32:31.728861 [ 0.109331] clocksource: Switched to clocksource mct-frc Oct 3 17:32:31.740874 [ 0.109926] VFS: Disk quotas dquot_6.6.0 Oct 3 17:32:31.740874 [ 0.110012] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 17:32:31.752832 [ 0.110754] AppArmor: AppArmor Filesystem Enabled Oct 3 17:32:31.752832 [ 0.120851] NET: Registered PF_INET protocol family Oct 3 17:32:31.752832 [ 0.121070] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 17:32:31.764859 [ 0.122671] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 17:32:31.776828 [ 0.122772] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 17:32:31.776828 [ 0.122797] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 17:32:31.788861 [ 0.122896] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 17:32:31.800815 [ 0.123127] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 17:32:31.800815 [ 0.123360] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 17:32:31.812837 [ 0.123452] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 17:32:31.812837 [ 0.123492] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 17:32:31.824869 [ 0.123694] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 17:32:31.824869 [ 0.123731] NET: Registered PF_XDP protocol family Oct 3 17:32:31.836985 [ 0.123742] PCI: CLS 0 bytes, default 64 Oct 3 17:32:31.837049 [ 0.124846] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 17:32:31.848892 [ 0.125102] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 17:32:31.848930 [ 0.129690] Trying to unpack rootfs image as initramfs... Oct 3 17:32:31.860962 [ 0.183489] Initialise system trusted keyrings Oct 3 17:32:31.860995 [ 0.183565] Key type blacklist registered Oct 3 17:32:31.872958 [ 0.183821] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 17:32:31.872993 [ 0.191002] zbud: loaded Oct 3 17:32:31.873017 [ 0.194311] integrity: Platform Keyring initialized Oct 3 17:32:31.885022 [ 0.194384] integrity: Machine keyring initialized Oct 3 17:32:31.885083 [ 0.194391] Key type asymmetric registered Oct 3 17:32:31.885129 [ 0.194398] Asymmetric key parser 'x509' registered Oct 3 17:32:31.897034 [ 1.503196] Freeing initrd memory: 25724K Oct 3 17:32:31.897094 [ 1.514797] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 17:32:31.909020 [ 1.515102] bounce: pool size: 64 pages Oct 3 17:32:31.909102 [ 1.515271] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 17:32:31.921012 [ 1.515445] io scheduler mq-deadline registered Oct 3 17:32:31.921086 [ 1.520569] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 17:32:31.933018 [ 1.541224] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 17:32:31.933114 [ 1.541236] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 17:32:31.945039 [ 1.543534] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 17:32:31.956946 [ 1.543544] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 17:32:31.957048 [ 1.544386] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 17:32:31.969028 [ 1.544396] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 17:32:31.981029 [ 1.545197] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 17:32:31.981115 [ 1.545206] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 17:32:31.992967 [ 1.547538] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 17:32:32.004979 [ 1.550417] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 17:32:32.016873 [ 1.553145] Serial: AMBA driver Oct 3 17:32:32.016873 [ 1.553418] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 17:32:32.016873 [ 1.553957] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 17:32:32.028859 [ 1.554482] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 17:32:32.040831 [ 2.692586] printk: console [ttySAC2] enabled Oct 3 17:32:32.040831 [ 2.697470] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 17:32:32.052857 [ 2.708047] STM32 USART driver initialized Oct 3 17:32:32.052857 [ 2.722196] mousedev: PS/2 mouse device common for all mice Oct 3 17:32:32.076812 [ 2.753499] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 17:32:32.100743 [ 2.762095] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T17:20:33 UTC (1727976033) Oct 3 17:32:32.112760 [ 2.771916] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 17:32:32.124945 [ 2.779374] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 17:32:32.136766 [ 2.787379] NET: Registered PF_INET6 protocol family Oct 3 17:32:32.136766 [ 2.801092] Segment Routing with IPv6 Oct 3 17:32:32.148791 [ 2.803359] In-situ OAM (IOAM) with IPv6 Oct 3 17:32:32.160796 [ 2.807282] mip6: Mobile IPv6 Oct 3 17:32:32.160796 [ 2.810165] NET: Registered PF_PACKET protocol family Oct 3 17:32:32.160796 [ 2.815300] mpls_gso: MPLS GSO support Oct 3 17:32:32.172785 [ 2.819543] ThumbEE CPU extension supported. Oct 3 17:32:32.172785 [ 2.823183] Registering SWP/SWPB emulation handler Oct 3 17:32:32.172785 [ 2.828438] registered taskstats version 1 Oct 3 17:32:32.184777 [ 2.832054] Loading compiled-in X.509 certificates Oct 3 17:32:32.184777 [ 3.292508] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 17:32:32.652833 [ 3.299826] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 17:32:32.652833 [ 3.310809] zswap: loaded using pool lzo/zbud Oct 3 17:32:32.664871 [ 3.314818] Key type .fscrypt registered Oct 3 17:32:32.664871 [ 3.318198] Key type fscrypt-provisioning registered Oct 3 17:32:32.676832 [ 3.331926] Key type encrypted registered Oct 3 17:32:32.676832 [ 3.334501] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 17:32:32.688824 [ 3.339997] ima: No TPM chip found, activating TPM-bypass! Oct 3 17:32:32.688824 [ 3.345420] ima: Allocated hash algorithm: sha256 Oct 3 17:32:32.700814 [ 3.350131] ima: No architecture policies found Oct 3 17:32:32.700814 [ 3.354685] evm: Initialising EVM extended attributes: Oct 3 17:32:32.712859 [ 3.359738] evm: security.selinux Oct 3 17:32:32.712859 [ 3.363034] evm: security.SMACK64 (disabled) Oct 3 17:32:32.712859 [ 3.367286] evm: security.SMACK64EXEC (disabled) Oct 3 17:32:32.724878 [ 3.371886] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 17:32:32.724878 [ 3.376920] evm: security.SMACK64MMAP (disabled) Oct 3 17:32:32.724878 [ 3.381521] evm: security.apparmor Oct 3 17:32:32.737007 [ 3.384889] evm: security.ima Oct 3 17:32:32.737044 [ 3.387858] evm: security.capability Oct 3 17:32:32.737044 [ 3.391422] evm: HMAC attrs: 0x1 Oct 3 17:32:32.737124 [ 3.979246] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 17:32:33.333784 [ 3.985233] clk: Disabling unused clocks Oct 3 17:32:33.333858 [ 3.999120] Freeing unused kernel image (initmem) memory: 2048K Oct 3 17:32:33.345597 [ 4.003989] Checked W+X mappings: passed, no W+X pages found Oct 3 17:32:33.357682 [ 4.009243] Run /init as init process Oct 3 17:32:33.357741 [ 4.544052] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 17:32:33.897649 [ 4.639723] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 17:32:33.993680 [ 4.651388] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 17:32:34.005705 [ 4.660280] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 17:32:34.017681 [ 4.669732] usbcore: registered new interface driver usbfs Oct 3 17:32:34.017715 [ 4.677479] usbcore: registered new interface driver hub Oct 3 17:32:34.029654 [ 4.701757] usbcore: registered new device driver usb Oct 3 17:32:34.053650 [ 4.733019] phy phy-12130000.phy.1: phy_power_on was called before phy_init Oct 3 17:32:34.089706 [ 4.742097] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 17:32:34.089740 [ 4.758204] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Oct 3 17:32:34.113670 [ 4.780657] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Oct 3 17:32:34.137640 [ 4.806432] phy phy-12130000.phy.1: phy_power_on was called before phy_init Oct 3 17:32:34.161682 [ 4.816141] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 17:32:34.173650 [ 4.827770] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 17:32:34.185679 [ 4.833897] exynos-ohci 12120000.usb: USB Host Controller Oct 3 17:32:34.185714 [ 4.841968] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 17:32:34.197715 [ 4.848811] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 17:32:34.209698 [ 4.856065] usb usb1: Product: EHCI Host Controller Oct 3 17:32:34.209731 [ 4.860849] usb usb1: Manufacturer: Linux 6.1.0-25-armmp ehci_hcd Oct 3 17:32:34.209758 [ 4.866923] usb usb1: SerialNumber: 12110000.usb Oct 3 17:32:34.221650 [ 4.893554] hub 1-0:1.0: USB hub found Oct 3 17:32:34.249635 [ 4.898734] hub 1-0:1.0: 3 ports detected Oct 3 17:32:34.249670 [ 4.908638] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Oct 3 17:32:34.265683 [ 4.915066] usb3503 usb-hub: switched to HUB mode Oct 3 17:32:34.265716 [ 4.919562] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 17:32:34.277502 [ 4.926429] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Oct 3 17:32:34.277537 [ 4.994462] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 17:32:34.357634 [ 5.001358] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 17:32:34.357693 [ 5.008508] usb usb2: Product: USB Host Controller Oct 3 17:32:34.357733 [ 5.013267] usb usb2: Manufacturer: Linux 6.1.0-25-armmp ohci_hcd Oct 3 17:32:34.373627 [ 5.019344] usb usb2: SerialNumber: 12120000.usb Oct 3 17:32:34.373627 [ 5.027363] hub 2-0:1.0: USB hub found Oct 3 17:32:34.373690 [ 5.030078] hub 2-0:1.0: 3 ports detected Oct 3 17:32:34.389616 [ 5.083646] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 17:32:34.433595 [ 5.087724] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 17:32:34.449752 [ 5.096060] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 17:32:34.449801 [ 5.104754] xhci-hcd xhci-hcd.2.auto: irq 108, io mem 0x12000000 Oct 3 17:32:34.457711 [ 5.111078] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 17:32:34.469635 [ 5.116187] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 17:32:34.469659 [ 5.126157] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 17:32:34.481691 [ 5.131688] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 17:32:34.481755 [ 5.139517] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 17:32:34.493734 [ 5.146705] usb usb3: Product: xHCI Host Controller Oct 3 17:32:34.493817 [ 5.151565] usb usb3: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 17:32:34.505718 [ 5.157650] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 17:32:34.505804 [ 5.163049] hub 3-0:1.0: USB hub found Oct 3 17:32:34.517674 [ 5.166308] hub 3-0:1.0: 1 port detected Oct 3 17:32:34.517755 [ 5.170649] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 17:32:34.529717 [ 5.178363] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 17:32:34.529795 [ 5.186466] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 17:32:34.541737 [ 5.193677] usb usb4: Product: xHCI Host Controller Oct 3 17:32:34.541813 [ 5.198528] usb usb4: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 17:32:34.553662 [ 5.204602] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 17:32:34.553756 [ 5.210103] hub 4-0:1.0: USB hub found Oct 3 17:32:34.565757 [ 5.213207] hub 4-0:1.0: 1 port detected Oct 3 17:32:34.565757 [ 5.239553] usb 1-3: new high-speed USB device number 2 using exynos-ehci Oct 3 17:32:34.589691 [ 5.402464] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Oct 3 17:32:34.757748 [ 5.409202] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 3 17:32:34.769749 [ 5.417027] hub 1-3:1.0: USB hub found Oct 3 17:32:34.769749 [ 5.420212] hub 1-3:1.0: 3 ports detected Oct 3 17:32:34.769826 Starting system log daemon: syslogd, klogd. Oct 3 17:32:34.901655 /var/run/utmp: No such file or directory Oct 3 17:32:36.725796 [?1h=(B   Oct 3 17:32:36.773852  Oct 3 17:32:36.785820 [  (-*) ][ Oct 03 17:20 ] Oct 3 17:32:36.797827 [  (0*start) ][ Oct 03 17:20 ] Oct 3 17:32:36.809808 [  (0*start) ][ Oct 03 17:20 ] Oct 3 17:32:36.821690 [  (0*start) ][ Oct 03 17:20 ] Oct 3 17:32:36.833754 [  (0*start) ][ Oct 03 17:20 ]                        [  (0*start) ][ Oct 03 17:20 ][  (0*start) ][ Oct 03 17:20 ] Oct 3 17:32:36.893873 [ 0- start  (2*shell) ][ Oct 03 17:20 ] Oct 3 17:32:36.905784 [ 0- start  (2*shell) ][ Oct 03 17:20 ] Oct 3 17:32:36.917848 [ 0- start  (2*shell) ][ Oct 03 17:20 ] Oct 3 17:32:36.941837 [ 0- start  (2*shell) ][ Oct 03 17:20 ]                        [ 0- start  (2*shell) ][ Oct 03 17:20 ][ 0- start  (2*shell) ][ Oct 03 17:20 ] Oct 3 17:32:36.989762 [ 0 start 2- shell  (3*shell) ][ Oct 03 17:20 ] Oct 3 17:32:37.001758 [ 0 start 2- shell  (3*shell) ][ Oct 03 17:20 ] Oct 3 17:32:37.025765 [ 0 start 2- shell  (3*shell) ][ Oct 03 17:20 ] Oct 3 17:32:37.037779 [ 0 start 2- shell  (3*shell) ][ Oct 03 17:20 ]                        [ 0 start 2- shell  (3*shell) ][ Oct 03 17:20 ][ 0 start 2- shell  (3*shell) ][ Oct 03 17:20 ] Oct 3 17:32:37.085863 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 17:20 ] Oct 3 17:32:37.109737 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 17:20 ] Oct 3 17:32:37.121742 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 17:20 ] Oct 3 17:32:37.133821 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 17:20 ]                        [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 17:20 ][ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 17:20 ] Oct 3 17:32:37.193680 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 17:20 ] Oct 3 17:32:37.205666 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 17:20 ] Oct 3 17:32:37.217692 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 17:20 ] Oct 3 17:32:37.229687 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 17:20 ]                        [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 17:20 ][ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 17:20 ] Oct 3 17:32:37.289680 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 17:20 ] Oct 3 17:32:37.301681 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 17:20 ] Oct 3 17:32:37.313647 [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 17:20 ] Oct 3 17:32:37.769736 Detecting network hardware ... 2%... 95%... 100% Oct 3 17:32:39.509570 Detecting link on eth0; please wait... ... 0%... 10%... 20% Oct 3 17:32:44.393706 Waiting for link-local address... ... 8%... 16%... 25%... 33%... 100% Oct 3 17:32:45.421657 Attempting IPv6 autoconfiguration... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 75%... 83%... 91%... 100% Oct 3 17:32:51.485646 Configuring the network with DHCP ... 0%... 100% Oct 3 17:32:54.653749 [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 17:21 ] Checking the Debian archive mirror ... 25%... 50%... 75%... 100% Oct 3 17:33:02.541677 Loading additional components ... 0%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Oct 3 17:33:35.785688 Setting up the clock ... 0%... 3%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 17:33 ]... 100% Oct 3 17:33:38.525849 Loading additional components ... 50%... 100% Oct 3 17:33:40.173708 Detecting disks and all other hardware ... 2%... 95%... 100% Oct 3 17:33:44.793691 Loading additional components ... 12%... 25%... 37%... 50%... 62%... 75%... 87%... 100% Oct 3 17:33:51.753683 Loading additional components ... 25%... 50%... 75%... 100% Oct 3 17:33:54.129244 Starting up the partitioner ... 4%... 13%... 21%... 30%... 43%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 17:34 ]... 52%... 60%... 73%... 82%... 91%... 100% Oct 3 17:34:07.269521 Guided partitioning ... 16%... 33%... 50%... 66%... 83%... 100% Oct 3 17:34:15.613759 Starting up the partitioner ... 4%... 12%... 20%... 32%... 40%... 52%... 60%... 72%... 80%... 92%... 100% Oct 3 17:34:26.472841 Partitions formatting ... 33% Oct 3 17:34:35.321814 Partitions formatting Oct 3 17:34:44.473797 Partitions formatting Installing the base system ... 0%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 17:35 ]... 17%... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 17:36 ]... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 17:37 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 17:38 ]... 48%... 50%...  Oct 3 17:38:35.449653  60%... 70%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 17:39 ]... 79%... 83%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 17:40 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 17:41 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 17:42 ]... 91%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 17:43 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 17:44 ]... 100% Oct 3 17:44:17.433601 Configuring apt ... 7%... 14%... 14%... 21%... 35%... 42%... 50%... 60%... 71%. Oct 3 17:44:54.645748 ... 82%... 92%... 100% Oct 3 17:44:57.213750 Select and install software ... 1%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 17:45 ]... 10%... 13%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 17:46 ]... 20%... 30%... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 17:47 ]... 50%... Oct 3 17:47:48.664725 . 60%... 70%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 17:48 ]... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 17:49 ]... 88%... 90%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 17:50 ]... 94%... 100% Oct 3 17:50:54.701689 Finishing the installation ... 4%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 17:51 ]... 12%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 17:52 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 17:53 ]... 16%... 20%... 32%... 40%... 44%... Oct 3 17:53:06.653767  52%... 60%... 72%... 80%... 92% The system is going down NOW! Sent SIGKILL to all processes Oct 3 17:53:17.625784 Requesting system reboot Oct 3 17:53:17.625825 [ 1249.316890] reboot: Reó Oct 3 17:53:18.993775 Oct 3 17:53:18.993801 Oct 3 17:53:18.993880 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 17:53:18.993931 Oct 3 17:53:18.993968 CPU: Exynos5250@1000MHz Oct 3 17:53:18.994010 Oct 3 17:53:18.994048 Board: Arndale Oct 3 17:53:18.994087 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 17:53:19.005728 ready Oct 3 17:53:19.005781 DRAM: 2 GiB Oct 3 17:53:19.005823 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 17:53:19.017708 trace: enabled Oct 3 17:53:19.053678 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 17:53:19.425699 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 17:53:19.473664 In: serial Oct 3 17:53:19.485634 Out: serial Oct 3 17:53:19.485664 Err: serial Oct 3 17:53:19.485686 SCSI: ARNDALE SCSI INIT Oct 3 17:53:19.485709 Target spinup took 0 ms. Oct 3 17:53:19.485732 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 17:53:19.497680 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 17:53:19.497713 Net: Net Initialization Skipped Oct 3 17:53:19.509661 No ethernet found. Oct 3 17:53:19.509692 Hostname: arndale-westfield Oct 3 17:53:19.509716 Hit any key to stop autoboot: 2  1  0 Oct 3 17:53:21.436827 (Re)start USB... Oct 3 17:53:21.436827 USB0: USB EHCI 1.00 Oct 3 17:53:21.436827 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 17:53:27.036802 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 17:53:27.036802 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 17:53:27.488790 Waiting for Ethernet connection... done. Oct 3 17:53:29.132790 BOOTP broadcast 1 Oct 3 17:53:29.132790 BOOTP broadcast 2 Oct 3 17:53:30.780890 DHCP client bound to address 10.149.64.45 (1713 ms) Oct 3 17:53:30.780890 Using asx0 device Oct 3 17:53:30.780890 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 17:53:30.792839 Filename 'pxelinux.0'. Oct 3 17:53:30.792839 Load address: 0x43e00000 Oct 3 17:53:30.792839 Loading: *### Oct 3 17:53:30.804806 2.2 MiB/s Oct 3 17:53:30.804806 done Oct 3 17:53:30.804806 Bytes transferred = 42430 (a5be hex) Oct 3 17:53:30.816883 missing environment variable: pxeuuid Oct 3 17:53:30.816883 Retrieving file: pxelinux.cfg/0A95402D Oct 3 17:53:30.816883 Using asx0 device Oct 3 17:53:30.816883 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 17:53:30.828838 Filename 'pxelinux.cfg/0A95402D'. Oct 3 17:53:30.828838 Load address: 0x51000000 Oct 3 17:53:30.828838 Loading: *# Oct 3 17:53:30.840882 31.3 KiB/s Oct 3 17:53:30.840882 done Oct 3 17:53:30.840882 Bytes transferred = 65 (41 hex) Oct 3 17:53:30.840882 Config file found Oct 3 17:53:30.840882 Ignoring unknown command: serial Oct 3 17:53:30.840882 1: local Oct 3 17:53:30.840882 scanning bus for devices... Oct 3 17:53:30.852799 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 17:53:30.876883 Type: Hard Disk Oct 3 17:53:30.876883 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 17:53:30.888867 Found 1 device(s). Oct 3 17:53:30.888867 Oct 3 17:53:30.888867 SCSI device 0: Oct 3 17:53:30.888867 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 17:53:30.888867 Type: Hard Disk Oct 3 17:53:30.899038 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 17:53:30.899115 ... is now current device Oct 3 17:53:30.899159 Scanning scsi 0... Oct 3 17:53:30.912825 Found U-Boot script /boot.scr Oct 3 17:53:31.020813 639 bytes read in 47 ms (12.7 KiB/s) Oct 3 17:53:31.068830 ## Executing script at 50000000 Oct 3 17:53:31.068830 Loading dtbs/exynos5250-arndale.dtb Oct 3 17:53:31.080807 46686 bytes read in 1120 ms (40 KiB/s) Oct 3 17:53:32.164829 Loading vmlinuz-6.1.0-25-armmp-lpae Oct 3 17:53:32.176803 5509632 bytes read in 186 ms (28.2 MiB/s) Oct 3 17:53:32.377713 Loading initrd.img-6.1.0-25-armmp-lpae Oct 3 17:53:32.377789 25731974 bytes read in 1886 ms (13 MiB/s) Oct 3 17:53:34.201733 Booting Oct 3 17:53:34.201820 Kernel image @ 0x42000000 [ 0x000000 - 0x541200 ] Oct 3 17:53:34.213741 ## Flattened Device Tree blob at 43000000 Oct 3 17:53:34.213800 Booting using the fdt blob at 0x43000000 Oct 3 17:53:34.213846 Loading Ramdisk to 4e775000, end 4ffff386 ... OK Oct 3 17:53:34.633698 Loading Device Tree to 4e766000, end 4e77465d ... OK Oct 3 17:53:34.633761 Oct 3 17:53:34.645687 Starting kernel ...(fake run for tracing) Oct 3 17:53:34.645747 Oct 3 17:53:34.645785 Oct 3 17:53:34.657685 Starting kernel ... Oct 3 17:53:34.657742 Oct 3 17:53:34.657780 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 17:53:40.809756 [ 0.000000] Linux version 6.1.0-25-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.106-3 (2024-08-26) Oct 3 17:53:40.821751 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=30c5387d Oct 3 17:53:40.833804 [ 0.000000] CPU: div instructions available: patching division code Oct 3 17:53:40.833869 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 17:53:40.845745 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 17:53:40.857763 [ 0.000000] Memory policy: Data cache writealloc Oct 3 17:53:40.857825 [ 0.000000] efi: UEFI not found. Oct 3 17:53:40.857871 [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000 Oct 3 17:53:40.869760 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 17:53:40.869820 [ 0.000000] Zone ranges: Oct 3 17:53:40.869864 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 17:53:40.881752 [ 0.000000] Normal empty Oct 3 17:53:40.881811 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 17:53:40.881862 [ 0.000000] Movable zone start for each node Oct 3 17:53:40.893824 [ 0.000000] Early memory node ranges Oct 3 17:53:40.893875 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 17:53:40.905749 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 17:53:40.905819 [ 0.000000] percpu: Embedded 18 pages/cpu s44820 r8192 d20716 u73728 Oct 3 17:53:40.917774 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 17:53:40.917840 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=ttySAC2,115200n8 Oct 3 17:53:40.929745 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 17:53:40.941783 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 17:53:40.941851 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 17:53:40.953793 [ 0.000000] Memory: 2015504K/2097152K available (12288K kernel code, 1717K rwdata, 3748K rodata, 2048K init, 383K bss, 65264K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 17:53:40.965760 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 17:53:40.977759 [ 0.000000] ftrace: allocating 39996 entries in 118 pages Oct 3 17:53:40.977855 [ 0.000000] ftrace: allocated 118 pages with 5 groups Oct 3 17:53:40.993736 [ 0.000000] trace event string verifier disabled Oct 3 17:53:40.993794 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 17:53:40.993844 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 17:53:41.005746 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 17:53:41.005807 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 17:53:41.005855 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 17:53:41.017640 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 17:53:41.029592 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 17:53:41.029592 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 17:53:41.037703 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 17:53:41.037774 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 17:53:41.049647 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 17:53:41.049647 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 17:53:41.061774 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 17:53:41.073755 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 17:53:41.073823 [ 0.002622] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 17:53:41.085688 [ 0.002635] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 17:53:41.101675 [ 0.002650] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 17:53:41.101675 [ 0.002662] Ignoring duplicate/late registration of read_current_timer delay Oct 3 17:53:41.113758 [ 0.003028] Console: colour dummy device 80x30 Oct 3 17:53:41.113824 [ 0.003070] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 17:53:41.125724 [ 0.003085] CPU: Testing write buffer coherency: ok Oct 3 17:53:41.125756 [ 0.003126] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 17:53:41.137626 [ 0.003134] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 17:53:41.149727 [ 0.003141] pid_max: default: 32768 minimum: 301 Oct 3 17:53:41.149789 [ 0.003508] LSM: Security Framework initializing Oct 3 17:53:41.149836 [ 0.003581] landlock: Up and running. Oct 3 17:53:41.161801 [ 0.003586] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 17:53:41.161866 [ 0.003775] AppArmor: AppArmor initialized Oct 3 17:53:41.169774 [ 0.003787] TOMOYO Linux initialized Oct 3 17:53:41.169833 [ 0.003833] LSM support for eBPF active Oct 3 17:53:41.181771 [ 0.004082] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 17:53:41.181840 [ 0.004095] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 17:53:41.193605 [ 0.005506] /cpus/cpu@0 missing clock-frequency property Oct 3 17:53:41.193605 [ 0.005533] /cpus/cpu@1 missing clock-frequency property Oct 3 17:53:41.205757 [ 0.005546] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 17:53:41.205830 [ 0.006498] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 17:53:41.217615 [ 0.006504] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 17:53:41.217615 [ 0.006608] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 17:53:41.229853 [ 0.006613] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 17:53:41.229983 [ 0.006754] Setting up static identity map for 0x40400000 - 0x404000ac Oct 3 17:53:41.241677 [ 0.007915] rcu: Hierarchical SRCU implementation. Oct 3 17:53:41.241747 [ 0.007920] rcu: Max phase no-delay instances is 1000. Oct 3 17:53:41.253651 [ 0.010057] EFI services will not be available. Oct 3 17:53:41.253651 [ 0.010405] smp: Bringing up secondary CPUs ... Oct 3 17:53:41.265771 [ 0.011144] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 17:53:41.265838 [ 0.011156] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 17:53:41.281789 [ 0.011286] smp: Brought up 1 node, 2 CPUs Oct 3 17:53:41.281849 [ 0.011294] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 17:53:41.281900 [ 0.011302] CPU: All CPU(s) started in HYP mode. Oct 3 17:53:41.289744 [ 0.011305] CPU: Virtualization extensions available. Oct 3 17:53:41.289806 [ 0.012173] devtmpfs: initialized Oct 3 17:53:41.301780 [ 0.023193] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 17:53:41.301849 [ 0.023424] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 17:53:41.313790 [ 0.023449] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 17:53:41.325792 [ 0.024000] pinctrl core: initialized pinctrl subsystem Oct 3 17:53:41.325853 [ 0.024726] DMI not present or invalid. Oct 3 17:53:41.337754 [ 0.025405] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 17:53:41.337818 [ 0.026954] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 17:53:41.353770 [ 0.028480] audit: initializing netlink subsys (disabled) Oct 3 17:53:41.353833 [ 0.028679] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 Oct 3 17:53:41.353889 [ 0.029857] thermal_sys: Registered thermal governor 'fair_share' Oct 3 17:53:41.365596 [ 0.029865] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 17:53:41.365596 [ 0.029869] thermal_sys: Registered thermal governor 'step_wise' Oct 3 17:53:41.377602 [ 0.029874] thermal_sys: Registered thermal governor 'user_space' Oct 3 17:53:41.377602 [ 0.029879] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 17:53:41.389754 [ 0.030078] No ATAGs? Oct 3 17:53:41.389813 [ 0.030146] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 17:53:41.401683 [ 0.030154] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 17:53:41.401683 [ 0.031242] Serial: AMBA PL011 UART driver Oct 3 17:53:41.413775 [ 0.080574] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 17:53:41.413850 [ 0.087513] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 17:53:41.425773 [ 0.091770] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages Oct 3 17:53:41.441755 [ 0.091778] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page Oct 3 17:53:41.441820 [ 0.099269] iommu: Default domain type: Translated Oct 3 17:53:41.441868 [ 0.099278] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 17:53:41.453744 [ 0.100240] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 17:53:41.453808 [ 0.100753] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 17:53:41.465604 [ 0.100764] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 17:53:41.465604 [ 0.101282] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 17:53:41.477611 [ 0.101312] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 17:53:41.489886 [ 0.101555] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 17:53:41.489953 [ 0.102054] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 17:53:41.490003 [ 0.102064] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 17:53:41.501752 [ 0.102444] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 17:53:41.501752 [ 0.102736] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 17:53:41.509671 [ 0.102746] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 17:53:41.509777 [ 0.103042] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 17:53:41.521789 [ 0.103170] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 17:53:41.521854 [ 0.103179] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 17:53:41.533749 [ 0.103363] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 17:53:41.533810 [ 0.103580] pps_core: LinuxPPS API ver. 1 registered Oct 3 17:53:41.545520 [ 0.103585] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 17:53:41.545520 [ 0.103602] PTP clock support registered Oct 3 17:53:41.557747 [ 0.105097] NetLabel: Initializing Oct 3 17:53:41.557810 [ 0.105102] NetLabel: domain hash size = 128 Oct 3 17:53:41.557859 [ 0.105107] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 17:53:41.569755 [ 0.105161] NetLabel: unlabeled traffic allowed by default Oct 3 17:53:41.569813 [ 0.105333] vgaarb: loaded Oct 3 17:53:41.581807 [ 0.106242] clocksource: Switched to clocksource mct-frc Oct 3 17:53:41.581870 [ 0.106825] VFS: Disk quotas dquot_6.6.0 Oct 3 17:53:41.581917 [ 0.106909] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 17:53:41.593737 [ 0.107729] AppArmor: AppArmor Filesystem Enabled Oct 3 17:53:41.593796 [ 0.117609] NET: Registered PF_INET protocol family Oct 3 17:53:41.605729 [ 0.117801] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 17:53:41.605729 [ 0.119264] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 17:53:41.617705 [ 0.119365] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 17:53:41.629718 [ 0.119389] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 17:53:41.629725 [ 0.119488] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 17:53:41.641676 [ 0.119719] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 17:53:41.641676 [ 0.119954] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 17:53:41.653869 [ 0.120050] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 17:53:41.665775 [ 0.120090] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 17:53:41.665842 [ 0.120319] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 17:53:41.677678 [ 0.120361] NET: Registered PF_XDP protocol family Oct 3 17:53:41.677678 [ 0.120373] PCI: CLS 0 bytes, default 64 Oct 3 17:53:41.677678 [ 0.120872] Trying to unpack rootfs image as initramfs... Oct 3 17:53:41.689663 [ 0.121225] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 17:53:41.689663 [ 0.122489] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 17:53:41.701859 [ 0.194539] Initialise system trusted keyrings Oct 3 17:53:41.713815 [ 0.194615] Key type blacklist registered Oct 3 17:53:41.713877 [ 0.195928] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 17:53:41.713929 [ 0.203825] zbud: loaded Oct 3 17:53:41.725834 [ 0.206906] integrity: Platform Keyring initialized Oct 3 17:53:41.725896 [ 0.206939] integrity: Machine keyring initialized Oct 3 17:53:41.725945 [ 0.206948] Key type asymmetric registered Oct 3 17:53:41.737846 [ 0.206956] Asymmetric key parser 'x509' registered Oct 3 17:53:41.737909 [ 1.421645] Freeing initrd memory: 25132K Oct 3 17:53:41.737956 [ 1.443767] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 17:53:41.749947 [ 1.444037] bounce: pool size: 64 pages Oct 3 17:53:41.750007 [ 1.444222] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 17:53:41.761848 [ 1.444390] io scheduler mq-deadline registered Oct 3 17:53:41.761908 [ 1.449504] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 17:53:41.773846 [ 1.470567] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 17:53:41.785874 [ 1.470579] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 17:53:41.785949 [ 1.472866] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 17:53:41.797828 [ 1.472875] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 17:53:41.809768 [ 1.473661] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 17:53:41.809837 [ 1.473670] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 17:53:41.821749 [ 1.474566] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 17:53:41.833792 [ 1.474575] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 17:53:41.845826 [ 1.476881] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 17:53:41.845901 [ 1.479730] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 17:53:41.857842 [ 1.482485] Serial: AMBA driver Oct 3 17:53:41.857901 [ 1.482711] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 17:53:41.869856 [ 1.483180] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 17:53:41.881839 [ 1.483646] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 17:53:41.881912 [ 2.564390] printk: console [ttySAC2] enabled Oct 3 17:53:41.893856 [ 2.569199] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 17:53:41.893929 [ 2.579880] STM32 USART driver initialized Oct 3 17:53:41.905797 [ 2.594354] mousedev: PS/2 mouse device common for all mice Oct 3 17:53:41.917831 [ 2.625574] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 17:53:41.953830 [ 2.634205] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T17:53:42 UTC (1727978022) Oct 3 17:53:41.965836 [ 2.644050] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 17:53:41.965904 [ 2.651522] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 17:53:41.977756 [ 2.659522] NET: Registered PF_INET6 protocol family Oct 3 17:53:41.989709 [ 2.683579] Segment Routing with IPv6 Oct 3 17:53:42.001623 [ 2.685824] In-situ OAM (IOAM) with IPv6 Oct 3 17:53:42.013729 [ 2.689813] mip6: Mobile IPv6 Oct 3 17:53:42.013786 [ 2.692668] NET: Registered PF_PACKET protocol family Oct 3 17:53:42.013835 [ 2.697833] mpls_gso: MPLS GSO support Oct 3 17:53:42.025647 [ 2.701856] ThumbEE CPU extension supported. Oct 3 17:53:42.025647 [ 2.705704] Registering SWP/SWPB emulation handler Oct 3 17:53:42.025647 [ 2.710945] registered taskstats version 1 Oct 3 17:53:42.037623 [ 2.714578] Loading compiled-in X.509 certificates Oct 3 17:53:42.037623 [ 3.175027] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 17:53:42.505753 [ 3.182343] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 17:53:42.517783 [ 3.193429] zswap: loaded using pool lzo/zbud Oct 3 17:53:42.517843 [ 3.197418] Key type .fscrypt registered Oct 3 17:53:42.517890 [ 3.200677] Key type fscrypt-provisioning registered Oct 3 17:53:42.529705 [ 3.224930] Key type encrypted registered Oct 3 17:53:42.553768 [ 3.227524] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 17:53:42.553831 [ 3.232979] ima: No TPM chip found, activating TPM-bypass! Oct 3 17:53:42.553881 [ 3.238447] ima: Allocated hash algorithm: sha256 Oct 3 17:53:42.565782 [ 3.243165] ima: No architecture policies found Oct 3 17:53:42.565842 [ 3.247699] evm: Initialising EVM extended attributes: Oct 3 17:53:42.577783 [ 3.252749] evm: security.selinux Oct 3 17:53:42.577841 [ 3.256038] evm: security.SMACK64 (disabled) Oct 3 17:53:42.577909 [ 3.260287] evm: security.SMACK64EXEC (disabled) Oct 3 17:53:42.589774 [ 3.264889] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 17:53:42.589836 [ 3.269922] evm: security.SMACK64MMAP (disabled) Oct 3 17:53:42.589883 [ 3.274523] evm: security.apparmor Oct 3 17:53:42.601711 [ 3.277894] evm: security.ima Oct 3 17:53:42.601769 [ 3.280859] evm: security.capability Oct 3 17:53:42.601814 [ 3.284423] evm: HMAC attrs: 0x1 Oct 3 17:53:42.613676 [ 3.871933] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 17:53:43.201701 [ 3.877899] clk: Disabling unused clocks Oct 3 17:53:43.201766 [ 3.890774] Freeing unused kernel image (initmem) memory: 2048K Oct 3 17:53:43.213765 [ 3.895639] Checked W+X mappings: passed, no W+X pages found Oct 3 17:53:43.225742 [ 3.900898] Run /init as init process Oct 3 17:53:43.225801 Loading, please wait... Oct 3 17:53:43.249716 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 17:53:43.333736 [ 4.854698] usbcore: registered new interface driver usbfs Oct 3 17:53:44.173753 [ 4.863058] usbcore: registered new interface driver hub Oct 3 17:53:44.185750 [ 4.868842] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 17:53:44.197790 [ 4.876073] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 17:53:44.209736 [ 4.891995] usbcore: registered new device driver usb Oct 3 17:53:44.221700 [ 4.921282] Synopsys Designware Multimedia Card Interface Driver Oct 3 17:53:44.245741 [ 4.934310] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 17:53:44.257787 [ 4.941887] phy phy-12130000.phy.2: phy_power_on was called before phy_init Oct 3 17:53:44.269752 [ 4.956998] phy phy-12130000.phy.2: phy_power_on was called before phy_init Oct 3 17:53:44.281741 [ 4.968766] exynos-ohci 12120000.usb: USB Host Controller Oct 3 17:53:44.293738 [ 4.998731] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 17:53:44.329764 [ 5.004641] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 17:53:44.329832 [ 5.004775] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 17:53:44.341776 [ 5.010356] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Oct 3 17:53:44.341846 [ 5.026527] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 17:53:44.353772 [ 5.031570] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 17:53:44.353834 [ 5.038585] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 17:53:44.365762 [ 5.043615] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 17:53:44.365824 [ 5.044883] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Oct 3 17:53:44.377728 [ 5.049880] SCSI subsystem initialized Oct 3 17:53:44.377759 [ 5.063540] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 109,32 bit host data width,128 deep fifo Oct 3 17:53:44.389680 [ 5.074560] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 17:53:44.401629 [ 5.092664] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo Oct 3 17:53:44.425753 [ 5.106441] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Oct 3 17:53:44.437666 [ 5.125465] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 17:53:44.449785 [ 5.134024] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Oct 3 17:53:44.461771 [ 5.142832] mmc_host mmc1: card is polling. Oct 3 17:53:44.461831 [ 5.162045] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 17:53:44.485771 [ 5.178589] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 17:53:44.509782 [ 5.185466] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 17:53:44.509850 [ 5.186301] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 17:53:44.521807 [ 5.192625] usb usb1: Product: USB Host Controller Oct 3 17:53:44.521870 [ 5.203383] usb usb1: Manufacturer: Linux 6.1.0-25-armmp-lpae ohci_hcd Oct 3 17:53:44.533736 [ 5.209883] usb usb1: SerialNumber: 12120000.usb Oct 3 17:53:44.533797 [ 5.239291] hub 1-0:1.0: USB hub found Oct 3 17:53:44.557743 [ 5.242804] hub 1-0:1.0: 3 ports detected Oct 3 17:53:44.569757 [ 5.251746] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 17:53:44.581778 [ 5.258610] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 17:53:44.581845 [ 5.265776] usb usb2: Product: EHCI Host Controller Oct 3 17:53:44.593781 [ 5.265785] usb usb2: Manufacturer: Linux 6.1.0-25-armmp-lpae ehci_hcd Oct 3 17:53:44.593846 [ 5.265792] usb usb2: SerialNumber: 12110000.usb Oct 3 17:53:44.605716 [ 5.295212] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 17:53:44.617784 [ 5.301358] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 17:53:44.629770 [ 5.315401] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 17:53:44.641761 [ 5.325996] mmc0: new high speed SDHC card at address aaaa Oct 3 17:53:44.653752 [ 5.332037] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 17:53:44.653821 [ 5.344321] mmcblk0: mmc0:aaaa SU04G 3.69 GiB Oct 3 17:53:44.665752 [ 5.348245] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 17:53:44.677777 [ 5.362586] hub 2-0:1.0: USB hub found Oct 3 17:53:44.689741 [ 5.365656] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 17:53:44.689806 [ 5.366307] mmc1: new DDR MMC card at address 0001 Oct 3 17:53:44.701767 [ 5.371961] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Oct 3 17:53:44.701840 [ 5.376747] hub 2-0:1.0: 3 ports detected Oct 3 17:53:44.713789 [ 5.385543] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 17:53:44.713861 [ 5.399722] mmcblk1: mmc1:0001 M4G1FB 3.64 GiB Oct 3 17:53:44.725742 [ 5.409135] mmcblk1: p1 p2 p3 p4 Oct 3 17:53:44.737720 [ 5.414826] mmcblk1boot0: mmc1:0001 M4G1FB 1.00 MiB Oct 3 17:53:44.737782 [ 5.423123] mmcblk1boot1: mmc1:0001 M4G1FB 1.00 MiB Oct 3 17:53:44.749764 [ 5.430397] mmcblk1rpmb: mmc1:0001 M4G1FB 128 KiB, chardev (241:0) Oct 3 17:53:44.761695 [ 5.450971] scsi host0: ahci-dwc Oct 3 17:53:44.773766 [ 5.454316] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 110 Oct 3 17:53:44.785662 [ 5.701166] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 17:53:45.025766 [ 5.775350] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 17:53:45.109701 [ 5.883776] I/O error, dev mmcblk0, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:53:45.226953 [ 5.930311] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 17:53:45.257847 [ 5.935920] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 17:53:45.257910 [ 5.941729] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 17:53:45.269854 [ 5.949212] ata1.00: configured for UDMA/133 Oct 3 17:53:45.269884 [ 5.952919] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 17:53:45.282669 [ 5.991732] I/O error, dev mmcblk0, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:53:45.317669 [ 6.007638] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 17:53:45.329674 [ 6.011693] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 17:53:45.341679 [ 6.019914] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 17:53:45.353656 [ 6.028757] xhci-hcd xhci-hcd.2.auto: irq 111, io mem 0x12000000 Oct 3 17:53:45.353656 [ 6.034926] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 17:53:45.365667 [ 6.040153] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 17:53:45.365667 [ 6.047816] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 17:53:45.377661 [ 6.054483] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 17:53:45.377661 [ 6.062555] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 17:53:45.389641 [ 6.069741] usb usb3: Product: xHCI Host Controller Oct 3 17:53:45.389641 [ 6.074608] usb usb3: Manufacturer: Linux 6.1.0-25-armmp-lpae xhci-hcd Oct 3 17:53:45.401655 [ 6.081140] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 17:53:45.401655 [ 6.088081] hub 3-0:1.0: USB hub found Oct 3 17:53:45.413671 [ 6.090529] hub 3-0:1.0: 1 port detected Oct 3 17:53:45.413671 [ 6.095521] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 17:53:45.425653 [ 6.102368] I/O error, dev mmcblk0, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:53:45.437641 [ 6.102566] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 17:53:45.437641 [ 6.119932] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 17:53:45.449676 [ 6.127098] usb usb4: Product: xHCI Host Controller Oct 3 17:53:45.449676 [ 6.131964] usb usb4: Manufacturer: Linux 6.1.0-25-armmp-lpae xhci-hcd Oct 3 17:53:45.461666 [ 6.138476] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 17:53:45.461666 [ 6.145271] hub 4-0:1.0: USB hub found Oct 3 17:53:45.473642 [ 6.147626] hub 4-0:1.0: 1 port detected Oct 3 17:53:45.473642 [ 6.156982] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 17:53:45.485634 [ 6.163055] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 17:53:45.485634 [ 6.175459] sd 0:0:0:0: [sda] Write Protect is off Oct 3 17:53:45.497620 [ 6.184839] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 17:53:45.509651 [ 6.192712] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 17:53:45.521685 [ 6.211751] I/O error, dev mmcblk0, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:53:45.545652 [ 6.219693] sda: sda1 sda2 < sda5 > Oct 3 17:53:45.545652 [ 6.223907] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 17:53:45.545652 [ 6.319747] I/O error, dev mmcblk0, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:53:45.653538 [ 6.427721] I/O error, dev mmcblk0, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:53:45.761591 [ 6.535688] I/O error, dev mmcblk0, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:53:45.869602 [ 6.643683] I/O error, dev mmcblk0, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:53:45.977536 [ 7.052211] I/O error, dev mmcblk0, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 17:53:46.385688 [ 7.159812] I/O error, dev mmcblk0, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 17:53:46.485603 [ 7.230264] random: crng init done Oct 3 17:53:46.557727 [ 7.339434] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. Oct 3 17:53:46.669699 [ 7.350397] device-mapper: uevent: version 1.0.3 Oct 3 17:53:46.669785 [ 7.358308] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Oct 3 17:53:46.681678 [ 7.767981] Buffer I/O error on dev mmcblk0, logical block 968056, async page read Oct 3 17:53:47.089771 Begin: Loading essential drivers ... done. Oct 3 17:53:47.365678 Begin: Running /scripts/init-premount ... done. Oct 3 17:53:50.377782 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 17:53:50.389748 Begin: Running /scripts/local-premount ... done. Oct 3 17:53:50.437748 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 17:53:50.485669 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 17:53:50.569736 /dev/mapper/arndale--westfield--vg-root: clean, 39343/1220608 files, 378272/4882432 blocks Oct 3 17:53:50.773701 done. Oct 3 17:53:50.785680 [ 11.592262] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 17:53:50.917764 [ 11.787056] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 17:53:51.109780 done. Oct 3 17:53:51.109831 Begin: Running /scripts/local-bottom ... done. Oct 3 17:53:51.157716 Begin: Running /scripts/init-bottom ... done. Oct 3 17:53:51.205677 [ 12.111803] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. Oct 3 17:53:51.433749 INIT: version 3.06 booting Oct 3 17:53:51.745693 INIT: No inittab.d directory found Oct 3 17:53:51.829643 Using makefile-style concurrent boot in runlevel S. Oct 3 17:53:52.153737 Starting hotplug events dispatcher: systemd-udevd. Oct 3 17:53:53.761450 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 17:53:53.997527 Synthesizing the initial hotplug events (devices)...done. Oct 3 17:53:54.549452 Waiting for /dev to be fully populated...[ 15.465972] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 17:53:54.789733 [ 15.477034] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Oct 3 17:53:54.801572 [ 15.483900] usb3503 usb-hub: switched to HUB mode Oct 3 17:53:54.813523 [ 15.488568] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 17:53:54.813523 [ 15.597635] sd 0:0:0:0: Attached scsi generic sg0 type 0 Oct 3 17:53:54.921589 [ 15.682692] panfrost 11800000.gpu: clock rate = 533000000 Oct 3 17:53:55.005566 [ 15.698105] panfrost 11800000.gpu: mali-t600 id 0x600 major 0x0 minor 0x0 status 0x1 Oct 3 17:53:55.029601 [ 15.704420] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,31b4dfff Oct 3 17:53:55.029601 [ 15.712554] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 Oct 3 17:53:55.041537 [ 15.724278] panfrost 11800000.gpu: shader_present=0xf l2_present=0x1 Oct 3 17:53:55.053556 [ 15.747331] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 0 Oct 3 17:53:55.077536 [ 15.784926] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 17:53:55.113486 [ 15.806293] usb 2-3: new high-speed USB device number 2 using exynos-ehci Oct 3 17:53:55.137547 [ 15.859040] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 17:53:55.185789 [ 15.967683] blk_print_req_error: 6 callbacks suppressed Oct 3 17:53:55.293770 [ 15.967695] I/O error, dev mmcblk0, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:53:55.305750 [ 15.986356] usb 2-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Oct 3 17:53:55.317748 [ 15.993138] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 3 17:53:55.317813 [ 16.001051] hub 2-3:1.0: USB hub found Oct 3 17:53:55.329735 [ 16.004082] hub 2-3:1.0: 3 ports detected Oct 3 17:53:55.329794 [ 16.081013] I/O error, dev mmcblk0, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:53:55.413686 [ 16.189255] I/O error, dev mmcblk0, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:53:55.521731 [ 16.297696] I/O error, dev mmcblk0, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:53:55.629727 [ 16.306477] usb 2-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 17:53:55.629783 [ 16.405903] I/O error, dev mmcblk0, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:53:55.737634 [ 16.439145] OF: graph: no port node found in /soc/hdmi@14530000 Oct 3 17:53:55.761724 [ 16.449341] usb 2-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=77.32 Oct 3 17:53:55.773763 [ 16.456335] usb 2-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Oct 3 17:53:55.785700 [ 16.463713] usb 2-3.2: Product: USB2.0 Hub Oct 3 17:53:55.785803 [ 16.471090] hub 2-3.2:1.0: USB hub found Oct 3 17:53:55.797743 [ 16.473840] hub 2-3.2:1.0: 4 ports detected Oct 3 17:53:55.797803 [ 16.513929] I/O error, dev mmcblk0, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:53:55.845665 [ 16.622022] I/O error, dev mmcblk0, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:53:55.953719 [ 16.730403] I/O error, dev mmcblk0, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:53:56.061730 [ 16.770747] usb 2-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 17:53:56.097717 [ 16.893857] usb 2-3.2.4: New USB device found, idVendor=0b95, idProduct=772a, bcdDevice= 0.01 Oct 3 17:53:56.217786 [ 16.901496] usb 2-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Oct 3 17:53:56.229738 [ 16.908783] usb 2-3.2.4: Product: AX88772 Oct 3 17:53:56.229791 [ 16.912922] usb 2-3.2.4: Manufacturer: ASIX Elec. Corp. Oct 3 17:53:56.241730 [ 16.918044] usb 2-3.2.4: SerialNumber: 000001 Oct 3 17:53:56.241790 [ 17.140133] I/O error, dev mmcblk0, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 17:53:56.469666 [ 17.248083] I/O error, dev mmcblk0, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 17:53:56.577676 [ 17.488545] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 17:53:56.817735 [ 17.858118] Buffer I/O error on dev mmcblk0, logical block 968056, async page read Oct 3 17:53:57.189586 [ 18.161033] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 17:53:57.489781 [ 18.176579] Asix Electronics AX88772A usb-002:004:10: attached PHY driver (mii_bus:phy_addr=usb-002:004:10, irq=POLL) Oct 3 17:53:57.501768 [ 18.188406] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 7e:5a:b6:03:5c:e9 Oct 3 17:53:57.513779 [ 18.204454] usbcore: registered new interface driver asix Oct 3 17:53:57.525717 done. Oct 3 17:53:57.777678 [ 19.002579] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 17:53:58.329704 Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). Oct 3 17:53:58.365575 Checking file systems.../dev/sda1: clean, 922/61056 files, 25402/243968 blocks Oct 3 17:54:00.049726 done. Oct 3 17:54:00.097668 Cleaning up temporary files... /tmp. Oct 3 17:54:00.373730 [ 21.238806] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 17:54:00.565779 [ 21.297789] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 17:54:00.625687 [ 21.538066] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k FS Oct 3 17:54:00.865718 Mounting local filesystems...done. Oct 3 17:54:01.285840 Activating swapfile swap, if any...done. Oct 3 17:54:01.285908 Cleaning up temporary files.... Oct 3 17:54:01.333656 Starting Setting kernel variables: sysctl. Oct 3 17:54:01.465636 [ 22.735404] audit: type=1400 audit(1727978041.612:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=900 comm="apparmor_parser" Oct 3 17:54:02.065774 [ 22.764820] audit: type=1400 audit(1727978041.640:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=901 comm="apparmor_parser" Oct 3 17:54:02.101808 [ 22.779517] audit: type=1400 audit(1727978041.640:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=901 comm="apparmor_parser" Oct 3 17:54:02.113663 [ 22.878562] asix 2-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 17:54:02.209650 [ 23.149449] audit: type=1400 audit(1727978042.024:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=938 comm="apparmor_parser" Oct 3 17:54:02.485782 [ 23.163757] audit: type=1400 audit(1727978042.024:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=938 comm="apparmor_parser" Oct 3 17:54:02.497799 [ 23.177899] audit: type=1400 audit(1727978042.024:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=938 comm="apparmor_parser" Oct 3 17:54:02.509726 [ 23.492761] audit: type=1400 audit(1727978042.368:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=937 comm="apparmor_parser" Oct 3 17:54:02.833777 [ 23.510382] audit: type=1400 audit(1727978042.368:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=937 comm="apparmor_parser" Oct 3 17:54:02.845762 [ 23.526499] audit: type=1400 audit(1727978042.368:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=937 comm="apparmor_parser" Oct 3 17:54:02.869650 [ 23.544029] audit: type=1400 audit(1727978042.368:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=937 comm="apparmor_parser" Oct 3 17:54:02.881721 Starting: AppArmorLoading AppArmor profiles...done. Oct 3 17:54:02.881773 . Oct 3 17:54:02.881812 [ 25.031477] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 17:54:04.361742 [ 25.037635] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 3 17:54:04.361742 Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1 Oct 3 17:54:05.661854 Copyright 2004-2022 Internet Systems Consortium. Oct 3 17:54:05.661887 All rights reserved. Oct 3 17:54:05.661910 For info, please visit https://www.isc.org/software/dhcp/ Oct 3 17:54:05.661937 Oct 3 17:54:05.661957 Listening on LPF/eth0/a6:46:13:77:e8:2f Oct 3 17:54:05.670074 Sending on LPF/eth0/a6:46:13:77:e8:2f Oct 3 17:54:05.670118 Sending on Socket/fallback Oct 3 17:54:05.670151 Created duid "\000\001\000\001.\221\226\271\246F\023w\350/". Oct 3 17:54:05.681659 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 Oct 3 17:54:05.681713 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 Oct 3 17:54:05.693680 DHCPOFFER of 10.149.64.45 from 10.149.64.4 Oct 3 17:54:05.693745 DHCPREQUEST for 10.149.64.45 on eth0 to 255.255.255.255 port 67 Oct 3 17:54:05.705656 DHCPACK of 10.149.64.45 from 10.149.64.4 Oct 3 17:54:05.705734 bound to 10.149.64.45 -- renewal in 292 seconds. Oct 3 17:54:05.705776 done. Oct 3 17:54:05.705822 Cleaning up temporary files.... Oct 3 17:54:05.717555 Starting nftables: none Oct 3 17:54:05.813603 . Oct 3 17:54:06.185643 INIT: Entering runlevel: 2 Oct 3 17:54:06.245640 Using makefile-style concurrent boot in runlevel 2. Oct 3 17:54:06.293666 Starting Apache httpd web server: apache2[ 28.385595] exynos4-fb 14400000.fimd: deferred probe timeout, ignoring dependency Oct 3 17:54:07.709708 [ 28.397342] exynos-mixer 14450000.mixer: deferred probe timeout, ignoring dependency Oct 3 17:54:07.721708 [ 28.405335] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations Oct 3 17:54:07.733719 [ 28.411739] exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm]) Oct 3 17:54:07.745694 [ 28.420268] exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm]) Oct 3 17:54:07.745733 [ 28.429951] exynos-drm exynos-drm: bound 14500000.dsi (ops hdmi_enable [exynosdrm]) Oct 3 17:54:07.757734 [ 28.436514] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm]) Oct 3 17:54:07.769707 [ 28.445784] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 17:54:07.769742 [ 28.452051] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 17:54:07.781693 [ 28.458626] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 Oct 3 17:54:07.781729 . Oct 3 17:54:08.321642 Starting periodic command scheduler: cron. Oct 3 17:54:08.621663 Starting system message bus: dbus. Oct 3 17:54:08.837621 Starting NTP server: ntpd2024-10-03T17:54:08 ntpd[1131]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 17:54:08.861661 2024-10-03T17:54:08 ntpd[1131]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 17:54:08.873624 . Oct 3 17:54:08.873650 Starting OpenBSD Secure Shell server: sshd. Oct 3 17:54:09.689661 Oct 3 17:54:10.745671 Debian GNU/Linux 12 arndale-westfield ttySAC2 Oct 3 17:54:10.757602 Oct 3 17:54:10.757640 arndale-westfield login: INIT: Switching to r INIT: No initUsing makefile-style concurrent boot in runlevel 6. Oct 3 17:59:10.236821 Stopping SMP IRQ Balancer: irqbalance. Oct 3 17:59:10.320892 Stopping hotplug events dispatcher: systemd-udevd. Oct 3 17:59:10.320892 Stopping nftables: none. Oct 3 17:59:10.332832 Saving the system clock to /dev/rtc0. Oct 3 17:59:10.576880 Hardware Clock updated to Thu Oct 3 17:59:10 UTC 2024. Oct 3 17:59:10.576880 Stopping Apache httpd web server: apache2. Oct 3 17:59:11.476830 Asking all remaining processes to terminate...done. Oct 3 17:59:11.728868 All processes ended within 1 seconds...done. Oct 3 17:59:11.740814 Deconfiguring network interfaces...ifdown: ignoring unknown interface eth0=eth0 Oct 3 17:59:11.836845 done. Oct 3 17:59:11.836845 [ 332.714632] EXT4-fs (sda1): unmounting filesystem. Oct 3 17:59:12.040943 Deactivating swap...done. Oct 3 17:59:12.100901 Unmounting local filesystems...done. Oct 3 17:59:12.100901 [ 333.073016] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 17:59:12.392854 Will now restart. Oct 3 17:59:12.680859 [ 333.383998] asix 2-3.2.4:1.0 eth0: Link is Down Oct 3 17:59:12.704889 [ 333.451374] sd 0:0:0:0: [sda] Synchronizing SCSI cache Oct 3 17:59:12.776921 [ 333.459032] wake enabled for irq 101 (gpx1-4) Oct 3 17:59:12.776921 [ 333.461921] wake enabled for irq 102 (gpx1-5) Oct 3 17:59:12.788877 [ 333.466281] wake enabled for irq 103 (gpx1-6) Oct 3 17:59:12.788877 [ 333.470617] wake enabled for irq 104 (gpx1-7) Oct 3 17:59:12.788877 [ 333.474955] wake enabled for irq 105 (gpx2-0) Oct 3 17:59:12.800864 [ 333.479295] wake enabled for irq 106 (gpx2-1) Oct 3 17:59:12.800864 [ 333.484117] reboot: Reű Oct 3 17:59:13.136833 Oct 3 17:59:13.136833 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 17:59:13.148888 Oct 3 17:59:13.148888 CPU: Exynos5250@1000MHz Oct 3 17:59:13.148888 Oct 3 17:59:13.148888 Board: Arndale Oct 3 17:59:13.148888 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 17:59:13.148888 ready Oct 3 17:59:13.148888 DRAM: 2 GiB Oct 3 17:59:13.148888 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 17:59:13.171554 trace: enabled Oct 3 17:59:13.205825 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 17:59:13.565768 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 17:59:13.625783 In: serial Oct 3 17:59:13.625838 Out: serial Oct 3 17:59:13.625880 Err: serial Oct 3 17:59:13.625920 SCSI: ARNDALE SCSI INIT Oct 3 17:59:13.637712 Target spinup took 0 ms. Oct 3 17:59:13.637770 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 17:59:13.637820 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 17:59:13.649799 Net: Net Initialization Skipped Oct 3 17:59:13.649857 No ethernet found. Oct 3 17:59:13.649900 Hostname: arndale-westfield Oct 3 17:59:13.661736 Hit any key to stop autoboot: 2  1  0 Oct 3 17:59:15.581777 (Re)start USB... Oct 3 17:59:15.581842 USB0: USB EHCI 1.00 Oct 3 17:59:15.581885 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 17:59:21.185730 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 17:59:21.185775 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 17:59:21.629644 Waiting for Ethernet connection... done. Oct 3 17:59:23.277632 BOOTP broadcast 1 Oct 3 17:59:23.277674 BOOTP broadcast 2 Oct 3 17:59:24.645705 DHCP client bound to address 10.149.64.45 (1420 ms) Oct 3 17:59:24.645830 Using asx0 device Oct 3 17:59:24.645830 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 17:59:24.657663 Filename 'pxelinux.0'. Oct 3 17:59:24.657668 Load address: 0x43e00000 Oct 3 17:59:24.657692 Loading: *### Oct 3 17:59:24.669695 2.4 MiB/s Oct 3 17:59:24.669700 done Oct 3 17:59:24.669722 Bytes transferred = 42430 (a5be hex) Oct 3 17:59:24.681695 missing environment variable: pxeuuid Oct 3 17:59:24.681703 Retrieving file: pxelinux.cfg/0A95402D Oct 3 17:59:24.681728 Using asx0 device Oct 3 17:59:24.681750 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 17:59:24.693691 Filename 'pxelinux.cfg/0A95402D'. Oct 3 17:59:24.693706 Load address: 0x51000000 Oct 3 17:59:24.693729 Loading: *# Oct 3 17:59:24.693751 31.3 KiB/s Oct 3 17:59:24.705695 done Oct 3 17:59:24.705701 Bytes transferred = 65 (41 hex) Oct 3 17:59:24.705725 Config file found Oct 3 17:59:24.705747 Ignoring unknown command: serial Oct 3 17:59:24.705770 1: local Oct 3 17:59:24.705792 scanning bus for devices... Oct 3 17:59:24.717616 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 17:59:24.741670 Type: Hard Disk Oct 3 17:59:24.741678 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 17:59:24.753700 Found 1 device(s). Oct 3 17:59:24.753706 Oct 3 17:59:24.753727 SCSI device 0: Oct 3 17:59:24.753749 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 17:59:24.765694 Type: Hard Disk Oct 3 17:59:24.765695 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 17:59:24.765722 ... is now current device Oct 3 17:59:24.777637 Scanning scsi 0... Oct 3 17:59:24.777650 Found U-Boot script /boot.scr Oct 3 17:59:24.945647 1742 bytes read in 44 ms (38.1 KiB/s) Oct 3 17:59:24.993639 ## Executing script at 50000000 Oct 3 17:59:25.005653 Loading dtbs/6.1.112+/exynos5250-arndale.dtb Oct 3 17:59:25.005690 46686 bytes read in 1970 ms (22.5 KiB/s) Oct 3 17:59:26.925628 1081360 bytes read in 113 ms (9.1 MiB/s) Oct 3 17:59:27.045651 Loaded xen-4.20-unstable to 0x41000000 (108010) Oct 3 17:59:27.057688 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan Oct 3 17:59:27.069625 10039808 bytes read in 422 ms (22.7 MiB/s) Oct 3 17:59:27.489647 Loaded vmlinuz-6.1.112+ to 0x42000000 (993200) Oct 3 17:59:27.501689 command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 17:59:27.513667 12059065 bytes read in 658 ms (17.5 MiB/s) Oct 3 17:59:28.161662 Loaded initrd.img-6.1.112+ to 0x43300000 (b801b9) Oct 3 17:59:28.173700 chosen { Oct 3 17:59:28.173738 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan"; Oct 3 17:59:28.185676 #size-cells = <0x00000001>; Oct 3 17:59:28.185707 #address-cells = <0x00000001>; Oct 3 17:59:28.185731 stdout-path = "serial2:115200n8"; Oct 3 17:59:28.185755 module@1 { Oct 3 17:59:28.197670 reg = <0x43300000 0x00b801b9>; Oct 3 17:59:28.197703 compatible = "xen,linux-initrd", "xen,multiboot-module"; Oct 3 17:59:28.197730 }; Oct 3 17:59:28.197751 module@0 { Oct 3 17:59:28.197855 bootargs = "ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Oct 3 17:59:28.221686 reg = <0x42000000 0x00993200>; Oct 3 17:59:28.221719 compatible = "xen,linux-zimage", "xen,multiboot-module"; Oct 3 17:59:28.221745 }; Oct 3 17:59:28.221766 }; Oct 3 17:59:28.221786 Booting 0x41000000 - 0x43000000 Oct 3 17:59:28.233665 Kernel image @ 0x41000000 [ 0x000000 - 0x144000 ] Oct 3 17:59:28.233698 ## Flattened Device Tree blob at 43000000 Oct 3 17:59:28.233723 Booting using the fdt blob at 0x43000000 Oct 3 17:59:28.245668 reserving fdt memory region: addr=43000000 size=c000 Oct 3 17:59:28.245701 Loading Device Tree to 4fff1000, end 4fffffff ... OK Oct 3 17:59:28.245728 Oct 3 17:59:28.257625 Starting kernel ...(fake run for tracing) Oct 3 17:59:28.257658 Oct 3 17:59:28.257679 Oct 3 17:59:28.257699 Starting kernel ... Oct 3 17:59:28.269600 Oct 3 17:59:28.269628 __ __ _ _ ____ ___ _ _ _ Oct 3 17:59:28.317693 \ \/ /___ _ __ | || | |___ \ / _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Oct 3 17:59:28.317704 \ // _ \ '_ \ | || |_ __) | | | |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Oct 3 17:59:28.329694 / \ __/ | | | |__ _| / __/| |_| |__| |_| | | | \__ \ || (_| | |_) | | __/ Oct 3 17:59:28.329710 /_/\_\___|_| |_| |_|(_)_____|\___/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Oct 3 17:59:28.341690 Oct 3 17:59:28.341699 (XEN) Xen version 4.20-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Thu Oct 3 17:27:13 UTC 2024 Oct 3 17:59:28.353690 (XEN) Latest ChangeSet: Tue Oct 1 11:22:38 2024 +0100 git:eb21ce14d7-dirty Oct 3 17:59:28.365697 (XEN) build-id: 67d9eb493b1c2fe24cd9cfaeb73ce711a783d5d4 Oct 3 17:59:28.365701 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Oct 3 17:59:28.377692 (XEN) 32-bit Execution: Oct 3 17:59:28.377699 (XEN) Processor Features: 00001031:00011011 Oct 3 17:59:28.377724 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Oct 3 17:59:28.389691 (XEN) Extensions: GenericTimer Security Oct 3 17:59:28.389697 (XEN) Debug Features: 02010555 Oct 3 17:59:28.389722 (XEN) Auxiliary Features: 00000000 Oct 3 17:59:28.389745 (XEN) Memory Model Features: 10201105 20000000 Oct 3 17:59:28.401690 (XEN) 01240000 02102211 Oct 3 17:59:28.401702 (XEN) ISA Features: 02101110 13112111 21232041 Oct 3 17:59:28.401727 (XEN) 11112131 10011142 00000000 Oct 3 17:59:28.413693 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Oct 3 17:59:28.425656 (XEN) Set SYSRAM to 0000000041000070 (00200070) Oct 3 17:59:28.425658 (XEN) SMP: Allowing 2 CPUs Oct 3 17:59:28.425682 (XEN) enabled workaround for: ARM erratum 766422 Oct 3 17:59:28.437693 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Oct 3 17:59:28.437708 (XEN) GICv2 initialization: Oct 3 17:59:28.437732 (XEN) gic_dist_addr=0000000010481000 Oct 3 17:59:28.449668 (XEN) gic_cpu_addr=0000000010482000 Oct 3 17:59:28.449700 (XEN) gic_hyp_addr=0000000010484000 Oct 3 17:59:28.449725 (XEN) gic_vcpu_addr=0000000010486000 Oct 3 17:59:28.461705 (XEN) gic_maintenance_irq=25 Oct 3 17:59:28.461707 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Oct 3 17:59:28.461734 (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2) Oct 3 17:59:28.473696 (XEN) Initializing Credit2 scheduler Oct 3 17:59:28.473704 (XEN) load_precision_shift: 18 Oct 3 17:59:28.473729 (XEN) load_window_shift: 30 Oct 3 17:59:28.485691 (XEN) underload_balance_tolerance: 0 Oct 3 17:59:28.485699 (XEN) overload_balance_tolerance: -3 Oct 3 17:59:28.485724 (XEN) runqueues arrangement: socket Oct 3 17:59:28.485747 (XEN) cap enforcement granularity: 10ms Oct 3 17:59:28.497696 (XEN) load tracking window length 1073741824 ns Oct 3 17:59:28.497716 (XEN) Allocated console ring of 16 KiB. Oct 3 17:59:28.497743 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Oct 3 17:59:28.509689 (XEN) CPU0: Guest atomics will try 1 times before pausing the domain Oct 3 17:59:28.509701 (XEN) Bringing up CPU1 Oct 3 17:59:28.521693 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Oct 3 17:59:28.521697 (XEN) Brought up 2 CPUs Oct 3 17:59:28.521721 (XEN) CPU 1 booted. Oct 3 17:59:28.521744 (XEN) I/O virtualisation disabled Oct 3 17:59:28.533691 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Oct 3 17:59:28.533701 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Oct 3 17:59:28.533727 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Oct 3 17:59:28.545692 (XEN) Initializing Credit2 scheduler Oct 3 17:59:28.545703 (XEN) load_precision_shift: 18 Oct 3 17:59:28.545728 (XEN) load_window_shift: 30 Oct 3 17:59:28.557690 (XEN) underload_balance_tolerance: 0 Oct 3 17:59:28.557702 (XEN) overload_balance_tolerance: -3 Oct 3 17:59:28.557726 (XEN) runqueues arrangement: socket Oct 3 17:59:28.557750 (XEN) cap enforcement granularity: 10ms Oct 3 17:59:28.572996 (XEN) load tracking window length 1073741824 ns Oct 3 17:59:28.572996 (XEN) Adding cpu 0 to runqueue 0 Oct 3 17:59:28.572996 (XEN) First cpu on runqueue, activating Oct 3 17:59:28.572996 (XEN) Adding cpu 1 to runqueue 0 Oct 3 17:59:28.584932 (XEN) alternatives: Patching with alt table 002d2f0c -> 002d2fe4 Oct 3 17:59:28.584932 (XEN) CPU0 will execute ICIALLU on guest exit Oct 3 17:59:28.584932 (XEN) CPU1 will execute ICIALLU on guest exit Oct 3 17:59:28.597022 (XEN) *** LOADING DOMAIN 0 *** Oct 3 17:59:28.597085 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Oct 3 17:59:28.597134 (XEN) Loading ramdisk from boot module @ 0000000043300000 Oct 3 17:59:28.608867 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Oct 3 17:59:28.608867 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Oct 3 17:59:29.160880 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Oct 3 17:59:29.172818 (XEN) Allocating PPI 16 for event channel interrupt Oct 3 17:59:29.196856 (XEN) d0: extended regions not supported for 32-bit guests Oct 3 17:59:29.208859 (XEN) Loading zImage from 0000000042000000 to 0000000067600000-0000000067f93200 Oct 3 17:59:29.208859 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d801b9 Oct 3 17:59:29.304825 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b4c2 Oct 3 17:59:29.404900 (XEN) Initial low memory virq threshold set at 0x4000 pages. Oct 3 17:59:29.404900 (XEN) Scrubbing Free RAM in background Oct 3 17:59:29.416899 (XEN) Std. Loglevel: All Oct 3 17:59:29.416899 (XEN) Guest Loglevel: All Oct 3 17:59:29.416899 (XEN) *************************************************** Oct 3 17:59:29.416899 (XEN) WARNING: SILO mode is not enabled. Oct 3 17:59:29.429044 (XEN) It has implications on the security of the system, Oct 3 17:59:29.429118 (XEN) unless the communications have been forbidden between Oct 3 17:59:29.440869 (XEN) untrusted domains. Oct 3 17:59:29.440869 (XEN) *************************************************** Oct 3 17:59:29.440869 (XEN) 3... 2... 1... Oct 3 17:59:32.444893 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 17:59:32.456838 (XEN) Freed 356kB init memory. Oct 3 17:59:32.456870 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 17:59:33.516857 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Oct 3 17:59:33.540757 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Oct 3 17:59:33.540757 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Oct 3 17:59:33.552784 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Oct 3 17:59:33.552784 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:59:33.564688 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 17:59:33.600776 [ 0.000000] Linux version 6.1.112+ (osstest@himrod0) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Wed Oct 2 15:25:09 UTC 2024 Oct 3 17:59:33.612788 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 17:59:33.624790 [ 0.000000] CPU: div instructions available: patching division code Oct 3 17:59:33.624790 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 17:59:33.636800 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 17:59:33.648798 [ 0.000000] Memory policy: Data cache writealloc Oct 3 17:59:33.648798 [ 0.000000] Xen 4.20 support found Oct 3 17:59:33.648798 [ 0.000000] efi: UEFI not found. Oct 3 17:59:33.660787 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 Oct 3 17:59:33.660787 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 17:59:33.660787 [ 0.000000] Zone ranges: Oct 3 17:59:33.672783 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Oct 3 17:59:33.672783 [ 0.000000] Normal empty Oct 3 17:59:33.672783 [ 0.000000] HighMem empty Oct 3 17:59:33.684787 [ 0.000000] Movable zone start for each node Oct 3 17:59:33.684787 [ 0.000000] Early memory node ranges Oct 3 17:59:33.684787 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Oct 3 17:59:33.696812 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Oct 3 17:59:33.696812 [ 0.000000] psci: probing for conduit method from DT. Oct 3 17:59:33.708779 [ 0.000000] psci: PSCIv1.1 detected in firmware. Oct 3 17:59:33.708779 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Oct 3 17:59:33.720785 [ 0.000000] psci: Trusted OS migration not required Oct 3 17:59:33.720785 [ 0.000000] psci: SMC Calling Convention v1.2 Oct 3 17:59:33.720785 [ 0.000000] percpu: Embedded 16 pages/cpu s35412 r8192 d21932 u65536 Oct 3 17:59:33.732787 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 Oct 3 17:59:33.744777 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 17:59:33.756797 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 17:59:33.768778 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Oct 3 17:59:33.768778 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Oct 3 17:59:33.780780 [ 0.000000] Memory: 416844K/524288K available (14336K kernel code, 2180K rwdata, 5604K rodata, 2048K init, 438K bss, 41908K reserved, 65536K cma-reserved, 0K highmem) Oct 3 17:59:33.792784 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 17:59:33.804795 [ 0.000000] trace event string verifier disabled Oct 3 17:59:33.804795 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 17:59:33.804795 [ 0.000000] rcu: RCU event tracing is enabled. Oct 3 17:59:33.816800 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Oct 3 17:59:33.816800 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Oct 3 17:59:33.828782 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 17:59:33.840780 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 17:59:33.840780 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 17:59:33.852781 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 17:59:33.852781 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Oct 3 17:59:33.864788 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 17:59:33.876790 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 17:59:33.876790 [ 0.000013] Switching to timer-based delay loop, resolution 41ns Oct 3 17:59:33.888786 [ 0.000503] Console: colour dummy device 80x30 Oct 3 17:59:33.888786 [ 0.293144] printk: console [hvc0] enabled Oct 3 17:59:33.888786 [ 0.297352] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Oct 3 17:59:33.900790 [ 0.307754] CPU: Testing write buffer coherency: ok Oct 3 17:59:33.912780 [ 0.312677] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 17:59:33.924785 [ 0.322231] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 17:59:33.924785 [ 0.328645] pid_max: default: 32768 minimum: 301 Oct 3 17:59:33.924785 [ 0.333438] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 17:59:33.936815 [ 0.340712] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 17:59:33.948787 [ 0.349128] /cpus/cpu@0 missing clock-frequency property Oct 3 17:59:33.948787 [ 0.353914] /cpus/cpu@1 missing clock-frequency property Oct 3 17:59:33.960797 [ 0.359310] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 17:59:33.960797 [ 0.365814] xen:grant_table: Grant tables using version 1 layout Oct 3 17:59:33.972784 [ 0.371159] Grant table initialized Oct 3 17:59:33.972784 [ 0.374698] xen:events: Using FIFO-based ABI Oct 3 17:59:33.972784 [ 0.379017] Xen: initializing cpu0 Oct 3 17:59:33.984782 [ 0.382544] Setting up static identity map for 0x60300000 - 0x603000ac Oct 3 17:59:33.984782 [ 0.390278] rcu: Hierarchical SRCU implementation. Oct 3 17:59:33.996745 [ 0.393932] rcu: Max phase no-delay instances is 1000. Oct 3 17:59:33.996745 [ 0.401982] EFI services will not be available. Oct 3 17:59:33.996745 [ 0.405290] smp: Bringing up secondary CPUs ... Oct 3 17:59:34.008746 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 17:59:34.081025 [ 0.479408] Xen: initializing cpu1 Oct 3 17:59:34.081066 [ 0.479566] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 17:59:34.081093 [ 0.479594] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 17:59:34.092892 [ 0.498463] smp: Brought up 1 node, 2 CPUs Oct 3 17:59:34.104875 [ 0.502236] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 17:59:34.104911 [ 0.508548] CPU: All CPU(s) started in SVC mode. Oct 3 17:59:34.104937 [ 0.513956] devtmpfs: initialized Oct 3 17:59:34.116801 [ 0.526528] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 17:59:34.128874 [ 0.533013] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Oct 3 17:59:34.140886 [ 0.542735] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 17:59:34.140921 [ 0.550744] pinctrl core: initialized pinctrl subsystem Oct 3 17:59:34.152881 [ 0.557291] DMI not present or invalid. Oct 3 17:59:34.152914 [ 0.560392] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 17:59:34.164875 [ 0.567574] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 17:59:34.164911 [ 0.576358] thermal_sys: Registered thermal governor 'step_wise' Oct 3 17:59:34.176861 [ 0.576487] software IO TLB: area num 2. Oct 3 17:59:34.176894 [ 0.585170] software IO TLB: only able to allocate 8 MB Oct 3 17:59:34.188929 [ 0.592297] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Oct 3 17:59:34.188964 [ 0.597480] No ATAGs? Oct 3 17:59:34.200874 [ 0.599829] hw-breakpoint: Failed to enable monitor mode on CPU 0. Oct 3 17:59:34.200910 [ 0.608357] Serial: AMBA PL011 UART driver Oct 3 17:59:34.212808 [ 0.640506] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 62 Oct 3 17:59:34.248779 [ 0.689927] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 17:59:34.296722 [ 0.715891] xen:balloon: Initialising balloon driver Oct 3 17:59:34.320765 [ 0.723418] iommu: Default domain type: Translated Oct 3 17:59:34.320765 [ 0.726919] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 17:59:34.332797 [ 0.733879] SCSI subsystem initialized Oct 3 17:59:34.332797 [ 0.737432] usbcore: registered new interface driver usbfs Oct 3 17:59:34.344777 [ 0.742665] usbcore: registered new interface driver hub Oct 3 17:59:34.344777 [ 0.748080] usbcore: registered new device driver usb Oct 3 17:59:34.344777 [ 0.754681] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 17:59:34.356784 [ 0.758309] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 17:59:34.356784 [ 0.764596] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 17:59:34.368784 [ 0.773043] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 17:59:34.380779 [ 0.782185] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 17:59:34.380779 [ 0.787706] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 17:59:34.392901 [ 0.792387] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 17:59:34.392917 [ 0.798646] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 17:59:34.404798 [ 0.803867] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 17:59:34.404798 [ 0.808658] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 17:59:34.416790 [ 0.814762] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 17:59:34.416790 [ 0.819932] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 17:59:34.416790 [ 0.824848] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 17:59:34.428775 [ 0.830883] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 17:59:34.428775 [ 0.836654] pps_core: LinuxPPS API ver. 1 registered Oct 3 17:59:34.440779 [ 0.841091] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 17:59:34.452830 [ 0.850292] PTP clock support registered Oct 3 17:59:34.452868 [ 0.862124] EDAC MC: Ver: 3.0.0 Oct 3 17:59:34.464807 [ 0.872067] vgaarb: loaded Oct 3 17:59:34.464839 [ 0.877735] clocksource: Switched to clocksource arch_sys_counter Oct 3 17:59:34.476748 [ 0.889240] NET: Registered PF_INET protocol family Oct 3 17:59:34.488772 [ 0.892879] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Oct 3 17:59:34.500783 [ 0.900783] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 17:59:34.500783 [ 0.908496] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 17:59:34.512840 [ 0.916269] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Oct 3 17:59:34.524784 [ 0.924120] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Oct 3 17:59:34.524784 [ 0.931406] TCP: Hash tables configured (established 4096 bind 4096) Oct 3 17:59:34.536779 [ 0.937763] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 17:59:34.536779 [ 0.944314] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 17:59:34.548780 [ 0.951456] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 17:59:34.548780 [ 0.967946] RPC: Registered named UNIX socket transport module. Oct 3 17:59:34.572853 [ 0.972485] RPC: Registered udp transport module. Oct 3 17:59:34.572853 [ 0.977257] RPC: Registered tcp transport module. Oct 3 17:59:34.584784 [ 0.982046] RPC: Registered tcp NFSv4.1 backchannel transport module. Oct 3 17:59:34.584784 [ 0.988577] PCI: CLS 0 bytes, default 64 Oct 3 17:59:34.584784 [ 0.993857] Initialise system trusted keyrings Oct 3 17:59:34.596771 [ 0.997191] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Oct 3 17:59:34.596771 [ 1.008751] squashfs: version 4.0 (2009/01/31) Phillip Lougher Oct 3 17:59:34.608712 [ 1.013766] NFS: Registering the id_resolver key type Oct 3 17:59:34.620785 [ 1.018389] Key type id_resolver registered Oct 3 17:59:34.620785 [ 1.019321] Trying to unpack rootfs image as initramfs... Oct 3 17:59:34.620785 [ 1.022591] Key type id_legacy registered Oct 3 17:59:34.632779 [ 1.032234] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Oct 3 17:59:34.632779 [ 1.038967] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Oct 3 17:59:34.644737 [ 1.088314] Key type asymmetric registered Oct 3 17:59:34.692723 [ 1.091041] Asymmetric key parser 'x509' registered Oct 3 17:59:34.692723 [ 1.096137] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 17:59:34.704731 [ 1.103505] io scheduler mq-deadline registered Oct 3 17:59:34.704731 [ 1.108105] io scheduler kyber registered Oct 3 17:59:34.704731 [ 1.156394] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 17:59:34.764710 [ 1.238372] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 17:59:34.836815 [ 1.244579] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 17:59:34.848762 [ 1.280774] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 17:59:34.884797 [ 1.286981] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 17:59:34.896720 [ 1.309617] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 17:59:34.908827 [ 1.315816] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 17:59:34.920756 [ 1.348292] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 17:59:34.956766 [ 1.354494] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 17:59:34.956766 [ 1.392004] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 17:59:34.992873 [ 1.452258] xen:xen_evtchn: Event-channel device installed Oct 3 17:59:35.052769 [ 1.599478] Freeing initrd memory: 11780K Oct 3 17:59:35.196735 [ 1.640011] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 17:59:35.244765 [ 1.649152] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 113, base_baud = 0) is a S3C6400/10 Oct 3 17:59:35.260787 [ 1.657307] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 114, base_baud = 0) is a S3C6400/10 Oct 3 17:59:35.260787 [ 1.666343] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 115, base_baud = 0) is a S3C6400/10 Oct 3 17:59:35.272715 [ 1.675593] SuperH (H)SCI(F) driver initialized Oct 3 17:59:35.272715 [ 1.680508] STMicroelectronics ASC driver initialized Oct 3 17:59:35.284784 [ 1.685799] STM32 USART driver initialized Oct 3 17:59:35.284784 [ 1.690786] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 17:59:35.296729 [ 1.704377] brd: module loaded Oct 3 17:59:35.308677 [ 1.710312] loop: module loaded Oct 3 17:59:35.308677 [ 1.727381] Invalid max_queues (4), will use default max: 2. Oct 3 17:59:35.332697 [ 1.754010] tun: Universal TUN/TAP device driver, 1.6 Oct 3 17:59:35.356755 [ 1.757940] CAN device driver interface Oct 3 17:59:35.356755 [ 1.762994] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Oct 3 17:59:35.368740 [ 1.773478] xen_netfront: Initialising Xen virtual ethernet driver Oct 3 17:59:35.380785 [ 1.778376] pegasus: Pegasus/Pegasus II USB Ethernet driver Oct 3 17:59:35.380785 [ 1.783947] usbcore: registered new interface driver pegasus Oct 3 17:59:35.396785 [ 1.789690] usbcore: registered new interface driver asix Oct 3 17:59:35.396785 [ 1.795159] usbcore: registered new interface driver ax88179_178a Oct 3 17:59:35.396785 [ 1.801316] usbcore: registered new interface driver cdc_ether Oct 3 17:59:35.408781 [ 1.807216] usbcore: registered new interface driver smsc75xx Oct 3 17:59:35.408781 [ 1.813044] usbcore: registered new interface driver smsc95xx Oct 3 17:59:35.420762 [ 1.818853] usbcore: registered new interface driver net1080 Oct 3 17:59:35.420762 [ 1.824568] usbcore: registered new interface driver cdc_subset Oct 3 17:59:35.432776 [ 1.830568] usbcore: registered new interface driver zaurus Oct 3 17:59:35.432776 [ 1.836224] usbcore: registered new interface driver cdc_ncm Oct 3 17:59:35.444742 [ 1.845492] usbcore: registered new interface driver usb-storage Oct 3 17:59:35.444742 [ 1.879765] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 17:59:35.480747 [ 1.888563] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T17:59:36 UTC (1727978376) Oct 3 17:59:35.492784 [ 1.897076] i2c_dev: i2c /dev entries driver Oct 3 17:59:35.492784 [ 1.907327] syscon-poweroff 10040000.system-controller:syscon-poweroff: pm_power_off already claimed for psci_sys_poweroff Oct 3 17:59:35.516770 [ 1.917028] syscon-poweroff: probe of 10040000.system-controller:syscon-poweroff failed with error -16 Oct 3 17:59:35.528720 [ 1.928285] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 17:59:35.528720 [ 1.939085] device-mapper: uevent: version 1.0.3 Oct 3 17:59:35.540735 [ 1.942552] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Oct 3 17:59:35.552751 [ 1.951546] cpu cpu0: OPP table can't be empty Oct 3 17:59:35.552751 [ 1.956541] failed to register cpuidle driver Oct 3 17:59:35.552751 [ 1.959798] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Oct 3 17:59:35.564817 [ 1.968093] sdhci: Secure Digital Host Controller Interface driver Oct 3 17:59:35.564857 [ 1.973162] sdhci: Copyright(c) Pierre Ossman Oct 3 17:59:35.576723 [ 1.981145] sdhci-pltfm: SDHCI platform and OF driver helper Oct 3 17:59:35.576723 [ 1.988859] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 17:59:35.588802 [ 1.994162] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Oct 3 17:59:35.600749 [ 2.000831] usbcore: registered new interface driver usbhid Oct 3 17:59:35.600749 [ 2.005639] usbhid: USB HID core driver Oct 3 17:59:35.612689 [ 2.016454] NET: Registered PF_INET6 protocol family Oct 3 17:59:35.612689 [ 2.021112] Segment Routing with IPv6 Oct 3 17:59:35.624721 [ 2.023831] In-situ OAM (IOAM) with IPv6 Oct 3 17:59:35.624721 [ 2.027880] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Oct 3 17:59:35.636742 [ 2.034217] NET: Registered PF_PACKET protocol family Oct 3 17:59:35.636742 [ 2.038937] can: controller area network core Oct 3 17:59:35.636742 [ 2.043346] NET: Registered PF_CAN protocol family Oct 3 17:59:35.648746 [ 2.048210] can: raw protocol Oct 3 17:59:35.648746 [ 2.051204] can: broadcast manager protocol Oct 3 17:59:35.648746 [ 2.055461] can: netlink gateway - max_hops=1 Oct 3 17:59:35.660749 [ 2.060137] Key type dns_resolver registered Oct 3 17:59:35.660749 [ 2.064885] ThumbEE CPU extension supported. Oct 3 17:59:35.660749 [ 2.068609] Registering SWP/SWPB emulation handler Oct 3 17:59:35.672726 [ 2.073900] Loading compiled-in X.509 certificates Oct 3 17:59:35.672726 [ 2.102332] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 17:59:35.708736 [ 2.108488] clk: Not disabling unused clocks Oct 3 17:59:35.708736 [ 2.115456] Freeing unused kernel image (initmem) memory: 2048K Oct 3 17:59:35.720712 [ 2.121613] Run /init as init process Oct 3 17:59:35.720712 Loading, please wait... Oct 3 17:59:35.744687 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 17:59:35.816704 [ 3.436942] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 17:59:37.044864 [ 3.462616] phy phy-12130000.phy.7: phy_power_on was called before phy_init Oct 3 17:59:37.068921 [ 3.468261] exynos-ohci 12120000.usb: USB Host Controller Oct 3 17:59:37.068956 [ 3.473702] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Oct 3 17:59:37.080900 [ 3.486675] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 17:59:37.092920 [ 3.493849] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 17:59:37.104913 [ 3.499886] phy phy-12130000.phy.7: phy_power_on was called before phy_init Oct 3 17:59:37.104949 [ 3.509501] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 17:59:37.116895 [ 3.515030] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Oct 3 17:59:37.116934 [ 3.540824] Synopsys Designware Multimedia Card Interface Driver Oct 3 17:59:37.144909 [ 3.550009] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 17:59:37.156883 [ 3.550128] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 17:59:37.156920 [ 3.571169] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 17:59:37.168911 [ 3.577327] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 17:59:37.180929 [ 3.584710] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 Oct 3 17:59:37.192927 [ 3.584765] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 17:59:37.192967 [ 3.598558] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 17:59:37.204919 [ 3.604817] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 17:59:37.204953 [ 3.610395] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo Oct 3 17:59:37.216860 [ 3.620339] mmc_host mmc0: card is polling. Oct 3 17:59:37.216892 [ 3.624489] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 17:59:37.228881 [ 3.631040] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 17:59:37.240916 [ 3.641211] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 127,32 bit host data width,128 deep fifo Oct 3 17:59:37.252823 [ 3.694898] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 17:59:37.300913 [ 3.697102] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 17:59:37.312913 [ 3.710168] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Oct 3 17:59:37.312952 [ 3.719133] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 17:59:37.324912 [ 3.730632] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 17:59:37.336916 [ 3.734373] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 Oct 3 17:59:37.336951 [ 3.740787] hub 1-0:1.0: USB hub found Oct 3 17:59:37.336976 [ 3.741458] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Oct 3 17:59:37.346831 [ 3.744271] hub 1-0:1.0: 3 ports detected Oct 3 17:59:37.346863 [ 3.750209] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 17:59:37.360884 [ 3.763945] s3c-rtc 101e0000.rtc: registered as rtc1 Oct 3 17:59:37.360917 [ 3.768504] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 17:59:37.372773 [ 3.775284] scsi host0: ahci-dwc Oct 3 17:59:37.372773 [ 3.780644] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 128 Oct 3 17:59:37.384769 [ 3.789898] hub 2-0:1.0: USB hub found Oct 3 17:59:37.384769 [ 3.792301] hub 2-0:1.0: 3 ports detected Oct 3 17:59:37.396667 [ 3.862181] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 17:59:37.468788 [ 3.870649] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 17:59:37.480717 [ 3.880593] mmc1: new high speed SDHC card at address aaaa Oct 3 17:59:37.480717 [ 3.886643] mmc0: new DDR MMC card at address 0001 Oct 3 17:59:37.492768 [ 3.891099] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Oct 3 17:59:37.492768 [ 3.896226] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Oct 3 17:59:37.492768 [ 3.904661] mmcblk0: p1 p2 p3 p4 Oct 3 17:59:37.504763 [ 3.910001] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Oct 3 17:59:37.516761 [ 3.915076] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Oct 3 17:59:37.516929 [ 3.922190] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Oct 3 17:59:37.528711 [ 4.297766] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 17:59:37.900747 [ 4.304214] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 17:59:37.900747 [ 4.309573] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 17:59:37.912743 [ 4.317390] ata1.00: configured for UDMA/133 Oct 3 17:59:37.912743 [ 4.321022] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 17:59:37.924749 [ 4.329994] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 17:59:37.936754 [ 4.336189] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 17:59:37.936754 [ 4.341706] sd 0:0:0:0: [sda] Write Protect is off Oct 3 17:59:37.948719 [ 4.346434] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 17:59:37.948719 [ 4.355577] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 17:59:37.960695 [ 4.383875] sda: sda1 sda2 < sda5 > Oct 3 17:59:37.984732 [ 4.386622] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 17:59:37.984732 [ 4.397511] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 17:59:37.996707 [ 4.580400] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Oct 3 17:59:38.188749 [ 4.587262] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 17:59:38.188749 [ 4.591783] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 17:59:38.204749 [ 4.603681] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 17:59:38.204749 [ 4.612345] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Oct 3 17:59:38.216775 [ 4.618009] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 17:59:38.216775 [ 4.623386] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 17:59:38.228780 [ 4.631135] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 17:59:38.240778 [ 4.638692] hub 3-0:1.0: USB hub found Oct 3 17:59:38.240778 [ 4.641682] hub 3-0:1.0: 1 port detected Oct 3 17:59:38.240778 [ 4.646293] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 17:59:38.252753 [ 4.654574] hub 4-0:1.0: USB hub found Oct 3 17:59:38.252753 [ 4.657632] hub 4-0:1.0: 1 port detected Oct 3 17:59:38.252753 [ 4.833840] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 17:59:38.444709 [ 4.906618] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 17:59:38.516709 [ 5.015275] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:59:38.624714 [ 5.123409] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:59:38.732717 [ 5.231487] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:59:38.840689 [ 5.339555] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:59:38.945746 [ 5.447607] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:59:39.053742 [ 5.555658] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:59:39.161641 [ 5.663726] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:59:39.269671 [ 5.771791] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:59:39.377604 [ 6.180503] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 17:59:39.785689 [ 6.288231] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 17:59:39.893714 [ 6.896553] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 17:59:40.497737 [ 7.187727] random: crng init done Oct 3 17:59:40.785704 Begin: Loading essential drivers ... done. Oct 3 17:59:41.373675 Begin: Running /scripts/init-premount ... done. Oct 3 17:59:44.385815 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 17:59:44.397664 Begin: Running /scripts/local-premount ... done. Oct 3 17:59:44.397712 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 17:59:44.457745 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 17:59:44.565698 /dev/mapper/arndale--westfield--vg-root: clean, 46037/1220608 files, 606556/4882432 blocks Oct 3 17:59:44.769783 done. Oct 3 17:59:44.781729 [ 11.189352] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 17:59:44.793742 [ 11.524085] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 17:59:45.129655 done. Oct 3 17:59:45.129655 Begin: Running /scripts/local-bottom ... done. Oct 3 17:59:45.177743 Begin: Running /scripts/init-bottom ... done. Oct 3 17:59:45.213675 INIT: version 3.06 booting Oct 3 17:59:45.753773 INIT: No inittab.d directory found Oct 3 17:59:45.813704 Using makefile-style concurrent boot in runlevel S. Oct 3 17:59:46.125727 Starting hotplug events dispatcher: systemd-udevd. Oct 3 17:59:47.673726 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 17:59:48.129719 Synthesizing the initial hotplug events (devices)...[ 14.737605] wm8994 3-001a: Device is not a WM8994, ID is 0 Oct 3 17:59:48.333748 [ 14.744363] wm8994: probe of 3-001a failed with error -22 Oct 3 17:59:48.345745 [ 15.450883] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Oct 3 17:59:49.053759 [ 15.474733] mc: Linux media interface: v0.10 Oct 3 17:59:49.077723 done. Oct 3 17:59:49.113683 Waiting for /dev to be fully populated...[ 15.528609] s5p-secss 10830000.sss: s5p-sss driver registered Oct 3 17:59:49.125654 [ 15.584178] videodev: Linux video capture interface: v2.00 Oct 3 17:59:49.185740 [ 15.800917] s5p-mfc 11000000.codec: Adding to iommu group 0 Oct 3 17:59:49.401732 [ 15.815292] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Oct 3 17:59:49.425676 [ 15.850982] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 17:59:49.461707 [ 15.880478] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 17:59:49.485725 [ 15.897982] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 17:59:49.497728 [ 15.905333] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 17:59:49.509738 [ 15.925584] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 17:59:49.533709 [ 15.946324] s5p-mfc 11000000.codec: decoder registered as /dev/video0 Oct 3 17:59:49.545744 [ 15.957822] s5p-mfc 11000000.codec: encoder registered as /dev/video1 Oct 3 17:59:49.557739 [ 15.989486] exynos-gsc 13e00000.gsc: Adding to iommu group 1 Oct 3 17:59:49.593706 [ 16.008579] exynos-gsc 13e10000.gsc: Adding to iommu group 2 Oct 3 17:59:49.605695 [ 16.018187] exynos-gsc 13e20000.gsc: Adding to iommu group 3 Oct 3 17:59:49.617713 [ 16.023414] exynos-gsc 13e30000.gsc: Adding to iommu group 4 Oct 3 17:59:49.629753 [ 16.034335] blk_print_req_error: 6 callbacks suppressed Oct 3 17:59:49.629819 [ 16.034346] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:59:49.641701 [ 16.147972] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:59:49.749787 [ 16.187908] usb3503 usb-hub: switched to HUB mode Oct 3 17:59:49.785735 [ 16.191326] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 17:59:49.797710 [ 16.256106] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:59:49.857766 [ 16.365747] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:59:49.965773 [ 16.473971] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:59:50.073762 [ 16.557785] usb 2-3: new high-speed USB device number 2 using exynos-ehci Oct 3 17:59:50.157751 [ 16.598182] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:59:50.205758 [ 16.602385] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Oct 3 17:59:50.205827 [ 16.706335] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:59:50.313712 [ 16.778775] hub 2-3:1.0: USB hub found Oct 3 17:59:50.373720 [ 16.781656] hub 2-3:1.0: 3 ports detected Oct 3 17:59:50.385715 [ 16.814427] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 17:59:50.421703 [ 16.898084] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 17:59:50.505754 [ 16.905768] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 17:59:50.505824 [ 16.914485] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 17:59:50.517765 [ 16.930104] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 17:59:50.529763 [ 16.937796] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 17:59:50.541749 [ 16.946554] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 17:59:50.553727 [ 17.177776] usb 2-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 17:59:50.785705 [ 17.226063] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 17:59:50.833733 [ 17.331327] hub 2-3.2:1.0: USB hub found Oct 3 17:59:50.929770 [ 17.334056] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 17:59:50.941741 [ 17.343039] hub 2-3.2:1.0: 4 ports detected Oct 3 17:59:50.941800 [ 17.384054] usbcore: registered new device driver onboard-usb-hub Oct 3 17:59:50.989828 [ 17.508629] hub 2-3.2:1.0: USB hub found Oct 3 17:59:51.109739 [ 17.511593] hub 2-3.2:1.0: 4 ports detected Oct 3 17:59:51.109799 [ 17.523597] hub 2-3.2:1.0: USB hub found Oct 3 17:59:51.121737 [ 17.526562] hub 2-3.2:1.0: 4 ports detected Oct 3 17:59:51.121796 [ 17.847759] usb 2-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 17:59:51.449748 [ 17.943791] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 17:59:51.545739 done. Oct 3 17:59:51.545791 [ 18.001691] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 17:59:51.605735 [ 18.339353] EXT4-fs (dm-0): re-mounted. Quota mode: disabled. Oct 3 17:59:51.941723 [ 18.689546] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 17:59:52.293795 [ 18.715439] Asix Electronics AX88772A usb-002:004:10: attached PHY driver (mii_bus:phy_addr=usb-002:004:10, irq=POLL) Oct 3 17:59:52.317833 [ 18.725375] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 2a:5c:58:5c:ec:e0 Oct 3 17:59:52.329736 Checking file systems.../dev/sda1: clean, 2105/61056 files, 43350/243968 blocks Oct 3 17:59:53.553713 done. Oct 3 17:59:53.593644 Cleaning up temporary files... /tmp. Oct 3 17:59:53.809758 [ 20.397149] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 17:59:54.001743 [ 20.445845] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 17:59:54.049730 [ 20.530136] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k Oct 3 17:59:54.133750 Mounting local filesystems...done. Oct 3 17:59:54.385752 Activating swapfile swap, if any...done. Oct 3 17:59:54.385818 Cleaning up temporary files.... Oct 3 17:59:54.421734 Starting Setting kernel variables: sysctl. Oct 3 17:59:54.577753 [ 22.320765] xenbr0: port 1(eth0) entered blocking state Oct 3 17:59:55.921667 [ 22.324629] xenbr0: port 1(eth0) entered disabled state Oct 3 17:59:55.921667 [ 22.330115] device eth0 entered promiscuous mode Oct 3 17:59:55.933651 [ 22.340466] asix 2-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 17:59:55.952722 Configuring network interfaces...RTNETLINK answers: Operation not supported Oct 3 17:59:57.841685 Oct 3 17:59:57.841728 Waiting for xenbr0 to get ready (MAXWAIT is 2 seconds). Oct 3 17:59:57.853600 [ 24.576116] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 17:59:58.177773 [ 24.576160] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 3 17:59:58.177837 [ 24.588507] xenbr0: port 1(eth0) entered blocking state Oct 3 17:59:58.189755 [ 24.593698] xenbr0: port 1(eth0) entered forwarding state Oct 3 17:59:58.189818 [ 24.599304] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready Oct 3 17:59:58.201715 done. Oct 3 17:59:58.429726 Cleaning up temporary files.... Oct 3 17:59:58.501590 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Oct 3 17:59:58.561614 Starting nftables: none Oct 3 17:59:58.597611 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Oct 3 17:59:58.657650 failed! Oct 3 17:59:58.657681 startpar: service(s) returned failure: nftables ... failed! Oct 3 17:59:58.657708 INIT: Entering runlevel: 2 Oct 3 17:59:58.681591 Using makefile-style concurrent boot in runlevel 2. Oct 3 17:59:58.693613 Starting Apache httpd web server: apache2AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.149.64.45. Set the 'ServerName' directive globally to suppress this message Oct 3 17:59:59.425744 . Oct 3 18:00:00.481700 Starting SMP IRQ Balancer: irqbalance. Oct 3 18:00:00.985658 Starting NTP server: ntpd2024-10-03T18:00:01 ntpd[1152]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 18:00:01.105763 2024-10-03T18:00:01 ntpd[1152]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 18:00:01.117686 . Oct 3 18:00:01.117738 Starting system message bus: dbus. Oct 3 18:00:01.273703 Starting OpenBSD Secure Shell server: sshd. Oct 3 18:00:02.245734 Starting /usr/local/sbin/xenstored... Oct 3 18:00:04.153806 Setting domain 0 name, domid and JSON config... Oct 3 18:00:04.153890 Done setting up Dom0 Oct 3 18:00:04.153933 Starting xenconsoled... Oct 3 18:00:04.153975 Starting QEMU as disk backend for dom0 Oct 3 18:00:04.165699 Oct 3 18:00:05.273698 Debian GNU/Linux 12 arndale-westfield hvc0 Oct 3 18:00:05.273698 Oct 3 18:00:05.273720 arndale-westfield login: [ 114.082097] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 18:01:27.689608 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 18:01:44.321015 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 18:08:24.697616 [ 625.713612] EXT4-fs (dm-3): unmounting filesystem. Oct 3 18:09:59.305781 [ 632.340339] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 18:10:05.941757 [ 637.420442] EXT4-fs (dm-3): unmounting filesystem. Oct 3 18:10:11.017638 [ 652.620887] xenbr0: port 2(vif1.0) entered blocking state Oct 3 18:10:26.209798 [ 652.624929] xenbr0: port 2(vif1.0) entered disabled state Oct 3 18:10:26.221756 [ 652.630636] device vif1.0 entered promiscuous mode Oct 3 18:10:26.221822 (XEN) d1v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 18:10:27.332845 (XEN) d1v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 18:10:27.344822 [ 654.538914] xen-blkback: backend/vbd/1/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 18:10:28.137102 [ 654.569713] xen-blkback: backend/vbd/1/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 18:10:28.173017 (XEN) common/grant_table.c:1909:d1v0 Expanding d1 grant table from 1 to 2 frames Oct 3 18:10:28.244859 [ 654.728108] vif vif-1-0 vif1.0: Guest Rx ready Oct 3 18:10:28.316840 [ 654.731291] IPv6: ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready Oct 3 18:10:28.328919 [ 654.738170] xenbr0: port 2(vif1.0) entered blocking state Oct 3 18:10:28.328919 [ 654.743390] xenbr0: port 2(vif1.0) entered forwarding state Oct 3 18:10:28.340848 (XEN) gnttab_mark_dirty not implemented yet Oct 3 18:10:28.364847 [ 701.943140] xenbr0: port 2(vif1.0) entered disabled state Oct 3 18:11:15.533695 [ 702.128265] xenbr0: port 2(vif1.0) entered disabled state Oct 3 18:11:15.725749 [ 702.132638] device vif1.0 left promiscuous mode Oct 3 18:11:15.725831 [ 702.136915] xenbr0: port 2(vif1.0) entered disabled state Oct 3 18:11:15.737661 [ 729.603389] xenbr0: port 2(vif2.0) entered blocking state Oct 3 18:11:43.201789 [ 729.607420] xenbr0: port 2(vif2.0) entered disabled state Oct 3 18:11:43.225679 [ 729.613099] device vif2.0 entered promiscuous mode Oct 3 18:11:43.225757 (XEN) d2v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 18:11:44.293758 (XEN) d2v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 18:11:44.305807 [ 731.543299] xen-blkback: backend/vbd/2/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 18:11:45.145681 [ 731.573306] xen-blkback: backend/vbd/2/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 18:11:45.169724 (XEN) common/grant_table.c:1909:d2v0 Expanding d2 grant table from 1 to 2 frames Oct 3 18:11:45.229697 [ 731.893691] vif vif-2-0 vif2.0: Guest Rx ready Oct 3 18:11:45.481710 [ 731.896810] IPv6: ADDRCONF(NETDEV_CHANGE): vif2.0: link becomes ready Oct 3 18:11:45.493750 [ 731.903439] xenbr0: port 2(vif2.0) entered blocking state Oct 3 18:11:45.493813 [ 731.908796] xenbr0: port 2(vif2.0) entered forwarding state Oct 3 18:11:45.505696 [ 781.375177] xenbr0: port 2(vif2.0) entered disabled state Oct 3 18:12:34.964841 [ 781.518596] xenbr0: port 2(vif2.0) entered disabled state Oct 3 18:12:35.108827 [ 781.523277] device vif2.0 left promiscuous mode Oct 3 18:12:35.120773 [ 781.527241] xenbr0: port 2(vif2.0) entered disabled state Oct 3 18:12:35.120773 [ 809.114892] xenbr0: port 2(vif3.0) entered blocking state Oct 3 18:13:02.705800 [ 809.118981] xenbr0: port 2(vif3.0) entered disabled state Oct 3 18:13:02.717695 [ 809.124577] device vif3.0 entered promiscuous mode Oct 3 18:13:02.717758 (XEN) d3v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 18:13:03.785804 (XEN) d3v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 18:13:03.797758 [ 811.039792] xen-blkback: backend/vbd/3/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 18:13:04.637713 [ 811.091584] xen-blkback: backend/vbd/3/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 18:13:04.685739 (XEN) common/grant_table.c:1909:d3v0 Expanding d3 grant table from 1 to 2 frames Oct 3 18:13:04.805686 [ 811.341481] vif vif-3-0 vif3.0: Guest Rx ready Oct 3 18:13:04.937747 [ 811.345930] IPv6: ADDRCONF(NETDEV_CHANGE): vif3.0: link becomes ready Oct 3 18:13:04.937815 [ 811.351265] xenbr0: port 2(vif3.0) entered blocking state Oct 3 18:13:04.949729 [ 811.356548] xenbr0: port 2(vif3.0) entered forwarding state Oct 3 18:13:04.949792 [ 861.040003] xenbr0: port 2(vif3.0) entered disabled state Oct 3 18:13:54.637698 [ 861.178268] xenbr0: port 2(vif3.0) entered disabled state Oct 3 18:13:54.769805 [ 861.182978] device vif3.0 left promiscuous mode Oct 3 18:13:54.769888 [ 861.186923] xenbr0: port 2(vif3.0) entered disabled state Oct 3 18:13:54.781649 [ 887.950205] xenbr0: port 2(vif4.0) entered blocking state Oct 3 18:14:21.545787 [ 887.954238] xenbr0: port 2(vif4.0) entered disabled state Oct 3 18:14:21.545820 [ 887.959882] device vif4.0 entered promiscuous mode Oct 3 18:14:21.557746 (XEN) d4v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 18:14:22.625732 (XEN) d4v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 18:14:22.649670 [ 889.855566] xen-blkback: backend/vbd/4/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 18:14:23.453698 [ 889.894323] xen-blkback: backend/vbd/4/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 18:14:23.489719 (XEN) common/grant_table.c:1909:d4v0 Expanding d4 grant table from 1 to 2 frames Oct 3 18:14:23.733011 [ 890.279827] vif vif-4-0 vif4.0: Guest Rx ready Oct 3 18:14:23.868883 [ 890.283678] IPv6: ADDRCONF(NETDEV_CHANGE): vif4.0: link becomes ready Oct 3 18:14:23.880851 [ 890.289548] xenbr0: port 2(vif4.0) entered blocking state Oct 3 18:14:23.880851 [ 890.294926] xenbr0: port 2(vif4.0) entered forwarding state Oct 3 18:14:23.892805 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 18:15:06.741718 [ 939.766282] xenbr0: port 2(vif4.0) entered disabled state Oct 3 18:15:13.361751 [ 939.938484] xenbr0: port 2(vif4.0) entered disabled state Oct 3 18:15:13.532847 [ 939.942927] device vif4.0 left promiscuous mode Oct 3 18:15:13.532847 [ 939.947140] xenbr0: port 2(vif4.0) entered disabled state Oct 3 18:15:13.544795 [ 967.044620] xenbr0: port 2(vif5.0) entered blocking state Oct 3 18:15:40.641188 [ 967.048700] xenbr0: port 2(vif5.0) entered disabled state Oct 3 18:15:40.641315 [ 967.054297] device vif5.0 entered promiscuous mode Oct 3 18:15:40.641367 (XEN) d5v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 18:15:41.720869 (XEN) d5v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 18:15:41.732887 [ 968.737990] xen-blkback: backend/vbd/5/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 18:15:42.329744 [ 968.765812] xen-blkback: backend/vbd/5/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 18:15:42.353764 (XEN) common/grant_table.c:1909:d5v0 Expanding d5 grant table from 1 to 2 frames Oct 3 18:15:42.509724 [ 969.078858] vif vif-5-0 vif5.0: Guest Rx ready Oct 3 18:15:42.665763 [ 969.082172] IPv6: ADDRCONF(NETDEV_CHANGE): vif5.0: link becomes ready Oct 3 18:15:42.677768 [ 969.088677] xenbr0: port 2(vif5.0) entered blocking state Oct 3 18:15:42.677836 [ 969.093925] xenbr0: port 2(vif5.0) entered forwarding state Oct 3 18:15:42.677887 [ 1012.014429] xenbr0: port 2(vif5.0) entered disabled state Oct 3 18:16:25.609665 [ 1012.179489] xenbr0: port 2(vif5.0) entered disabled state Oct 3 18:16:25.765718 [ 1012.184422] device vif5.0 left promiscuous mode Oct 3 18:16:25.777672 [ 1012.188212] xenbr0: port 2(vif5.0) entered disabled state Oct 3 18:16:25.777707 [ 1039.249663] xenbr0: port 2(vif6.0) entered blocking state Oct 3 18:16:52.840895 [ 1039.253702] xenbr0: port 2(vif6.0) entered disabled state Oct 3 18:16:52.840895 [ 1039.259395] device vif6.0 entered promiscuous mode Oct 3 18:16:52.852791 (XEN) d6v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 18:16:53.917723 (XEN) d6v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 18:16:53.932679 [ 1041.218774] xen-blkback: backend/vbd/6/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 18:16:54.817728 [ 1041.286172] xen-blkback: backend/vbd/6/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 18:16:54.877747 (XEN) common/grant_table.c:1909:d6v0 Expanding d6 grant table from 1 to 2 frames Oct 3 18:16:54.985749 [ 1041.465618] vif vif-6-0 vif6.0: Guest Rx ready Oct 3 18:16:55.057803 [ 1041.468775] IPv6: ADDRCONF(NETDEV_CHANGE): vif6.0: link becomes ready Oct 3 18:16:55.057890 [ 1041.475350] xenbr0: port 2(vif6.0) entered blocking state Oct 3 18:16:55.069701 [ 1041.486100] xenbr0: port 2(vif6.0) entered forwarding state Oct 3 18:16:55.081699 [ 1083.906305] xenbr0: port 2(vif6.0) entered disabled state Oct 3 18:17:37.493716 [ 1084.098630] xenbr0: port 2(vif6.0) entered disabled state Oct 3 18:17:37.685694 [ 1084.103035] device vif6.0 left promiscuous mode Oct 3 18:17:37.685728 [ 1084.107330] xenbr0: port 2(vif6.0) entered disabled state Oct 3 18:17:37.697632 [ 1111.128569] xenbr0: port 2(vif7.0) entered blocking state Oct 3 18:18:04.712836 [ 1111.132600] xenbr0: port 2(vif7.0) entered disabled state Oct 3 18:18:04.724870 [ 1111.138302] device vif7.0 entered promiscuous mode Oct 3 18:18:04.724870 (XEN) d7v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 18:18:05.808757 (XEN) d7v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 18:18:05.820757 [ 1112.769453] xen-blkback: backend/vbd/7/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 18:18:06.360797 [ 1112.801149] xen-blkback: backend/vbd/7/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 18:18:06.400702 (XEN) common/grant_table.c:1909:d7v0 Expanding d7 grant table from 1 to 2 frames Oct 3 18:18:06.424739 [ 1112.946986] vif vif-7-0 vif7.0: Guest Rx ready Oct 3 18:18:06.532832 [ 1112.951451] IPv6: ADDRCONF(NETDEV_CHANGE): vif7.0: link becomes ready Oct 3 18:18:06.544876 [ 1112.956710] xenbr0: port 2(vif7.0) entered blocking state Oct 3 18:18:06.544876 [ 1112.962134] xenbr0: port 2(vif7.0) entered forwarding state Oct 3 18:18:06.556738 [ 1155.709496] xenbr0: port 2(vif7.0) entered disabled state Oct 3 18:18:49.296807 [ 1155.878439] xenbr0: port 2(vif7.0) entered disabled state Oct 3 18:18:49.464817 [ 1155.883036] device vif7.0 left promiscuous mode Oct 3 18:18:49.476819 [ 1155.887089] xenbr0: port 2(vif7.0) entered disabled state Oct 3 18:18:49.476819 [ 1183.003850] xenbr0: port 2(vif8.0) entered blocking state Oct 3 18:19:16.597717 [ 1183.007925] xenbr0: port 2(vif8.0) entered disabled state Oct 3 18:19:16.597769 [ 1183.013515] device vif8.0 entered promiscuous mode Oct 3 18:19:16.597796 (XEN) d8v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 18:19:17.677720 (XEN) d8v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 18:19:17.689716 [ 1184.918897] xen-blkback: backend/vbd/8/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 18:19:18.509745 [ 1184.953359] xen-blkback: backend/vbd/8/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 18:19:18.545724 (XEN) common/grant_table.c:1909:d8v0 Expanding d8 grant table from 1 to 2 frames Oct 3 18:19:18.605653 [ 1185.177861] vif vif-8-0 vif8.0: Guest Rx ready Oct 3 18:19:18.761715 [ 1185.181040] IPv6: ADDRCONF(NETDEV_CHANGE): vif8.0: link becomes ready Oct 3 18:19:18.773694 [ 1185.187557] xenbr0: port 2(vif8.0) entered blocking state Oct 3 18:19:18.773719 [ 1185.192946] xenbr0: port 2(vif8.0) entered forwarding state Oct 3 18:19:18.785665 [ 1227.569289] xenbr0: port 2(vif8.0) entered disabled state Oct 3 18:20:01.156680 [ 1227.708445] xenbr0: port 2(vif8.0) entered disabled state Oct 3 18:20:01.300894 [ 1227.716511] device vif8.0 left promiscuous mode Oct 3 18:20:01.300894 [ 1227.719761] xenbr0: port 2(vif8.0) entered disabled state Oct 3 18:20:01.312844 [ 1254.791420] xenbr0: port 2(vif9.0) entered blocking state Oct 3 18:20:28.376792 [ 1254.795453] xenbr0: port 2(vif9.0) entered disabled state Oct 3 18:20:28.388797 [ 1254.801139] device vif9.0 entered promiscuous mode Oct 3 18:20:28.388797 (XEN) d9v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 18:20:29.468809 (XEN) d9v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 18:20:29.480848 [ 1256.458360] xen-blkback: backend/vbd/9/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 18:20:30.041874 [ 1256.522987] xen-blkback: backend/vbd/9/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 18:20:30.113734 (XEN) common/grant_table.c:1909:d9v0 Expanding d9 grant table from 1 to 2 frames Oct 3 18:20:30.161719 [ 1256.689160] vif vif-9-0 vif9.0: Guest Rx ready Oct 3 18:20:30.269751 [ 1256.693665] IPv6: ADDRCONF(NETDEV_CHANGE): vif9.0: link becomes ready Oct 3 18:20:30.281770 [ 1256.698894] xenbr0: port 2(vif9.0) entered blocking state Oct 3 18:20:30.281832 [ 1256.704243] xenbr0: port 2(vif9.0) entered forwarding state Oct 3 18:20:30.293759 [ 1299.505132] xenbr0: port 2(vif9.0) entered disabled state Oct 3 18:21:13.089666 [ 1299.688104] xenbr0: port 2(vif9.0) entered disabled state Oct 3 18:21:13.281644 [ 1299.692552] device vif9.0 left promiscuous mode Oct 3 18:21:13.339413 [ 1299.696742] xenbr0: port 2(vif9.0) entered disabled state Oct 3 18:21:13.339459 [ 1326.533775] xenbr0: port 2(vif10.0) entered blocking state Oct 3 18:21:40.125706 [ 1326.537928] xenbr0: port 2(vif10.0) entered disabled state Oct 3 18:21:40.125749 [ 1326.543625] device vif10.0 entered promiscuous mode Oct 3 18:21:40.137598 (XEN) d10v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 18:21:41.205653 (XEN) d10v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 18:21:41.217665 [ 1328.478856] xen-blkback: backend/vbd/10/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 18:21:42.069580 [ 1328.596598] xen-blkback: backend/vbd/10/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 18:21:42.189670 (XEN) common/grant_table.c:1909:d10v0 Expanding d10 grant table from 1 to 2 frames Oct 3 18:21:42.309670 [ 1328.963949] vif vif-10-0 vif10.0: Guest Rx ready Oct 3 18:21:42.549675 [ 1328.967374] IPv6: ADDRCONF(NETDEV_CHANGE): vif10.0: link becomes ready Oct 3 18:21:42.561590 [ 1328.973978] xenbr0: port 2(vif10.0) entered blocking state Oct 3 18:21:42.561632 [ 1328.979407] xenbr0: port 2(vif10.0) entered forwarding state Oct 3 18:21:42.573571 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 18:21:48.129823 [ 1371.209332] xenbr0: port 2(vif10.0) entered disabled state Oct 3 18:22:24.793840 [ 1371.378557] xenbr0: port 2(vif10.0) entered disabled state Oct 3 18:22:24.961834 [ 1371.383042] device vif10.0 left promiscuous mode Oct 3 18:22:24.973711 [ 1371.387374] xenbr0: port 2(vif10.0) entered disabled state Oct 3 18:22:24.973835 [ 1398.190058] xenbr0: port 2(vif11.0) entered blocking state Oct 3 18:22:51.773726 [ 1398.194185] xenbr0: port 2(vif11.0) entered disabled state Oct 3 18:22:51.785728 [ 1398.199953] device vif11.0 entered promiscuous mode Oct 3 18:22:51.785791 (XEN) d11v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 18:22:52.865715 (XEN) d11v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 18:22:52.877712 [ 1400.175258] xen-blkback: backend/vbd/11/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 18:22:53.765665 [ 1400.234410] xen-blkback: backend/vbd/11/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 18:22:53.825643 (XEN) common/grant_table.c:1909:d11v0 Expanding d11 grant table from 1 to 2 frames Oct 3 18:22:53.933625 [ 1400.514084] vif vif-11-0 vif11.0: Guest Rx ready Oct 3 18:22:54.101679 [ 1400.517843] IPv6: ADDRCONF(NETDEV_CHANGE): vif11.0: link becomes ready Oct 3 18:22:54.101715 [ 1400.524045] xenbr0: port 2(vif11.0) entered blocking state Oct 3 18:22:54.113664 [ 1400.529569] xenbr0: port 2(vif11.0) entered forwarding state Oct 3 18:22:54.113698 [ 1442.973314] xenbr0: port 2(vif11.0) entered disabled state Oct 3 18:23:36.557764 [ 1443.139576] xenbr0: port 2(vif11.0) entered disabled state Oct 3 18:23:36.725795 [ 1443.144131] device vif11.0 left promiscuous mode Oct 3 18:23:36.725856 [ 1443.148506] xenbr0: port 2(vif11.0) entered disabled state Oct 3 18:23:36.737661 [ 1470.595295] xenbr0: port 2(vif12.0) entered blocking state Oct 3 18:24:04.176955 [ 1470.599452] xenbr0: port 2(vif12.0) entered disabled state Oct 3 18:24:04.188926 [ 1470.605152] device vif12.0 entered promiscuous mode Oct 3 18:24:04.188926 (XEN) d12v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 18:24:05.272749 (XEN) d12v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 18:24:05.284774 [ 1472.495810] xen-blkback: backend/vbd/12/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 18:24:06.080840 [ 1472.528070] xen-blkback: backend/vbd/12/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 18:24:06.116822 (XEN) common/grant_table.c:1909:d12v0 Expanding d12 grant table from 1 to 2 frames Oct 3 18:24:06.152948 [ 1472.673461] vif vif-12-0 vif12.0: Guest Rx ready Oct 3 18:24:06.260901 [ 1472.676809] IPv6: ADDRCONF(NETDEV_CHANGE): vif12.0: link becomes ready Oct 3 18:24:06.260901 [ 1472.683628] xenbr0: port 2(vif12.0) entered blocking state Oct 3 18:24:06.272879 [ 1472.688884] xenbr0: port 2(vif12.0) entered forwarding state Oct 3 18:24:06.272879 [ 1512.637017] xenbr0: port 2(vif12.0) entered disabled state Oct 3 18:24:46.213788 [ 1512.718238] xenbr0: port 2(vif12.0) entered disabled state Oct 3 18:24:46.297744 [ 1512.722767] device vif12.0 left promiscuous mode Oct 3 18:24:46.309737 [ 1512.727068] xenbr0: port 2(vif12.0) entered disabled state Oct 3 18:24:46.309801 Oct 3 18:25:06.205966 (XEN) *** Serial input to Xen (type 'CTRL-x' three times to switch input) Oct 3 18:25:06.225676 Oct 3 18:25:06.226373 Oct 3 18:25:07.260093 (XEN) '0' pressed -> dumping Dom0's registers Oct 3 18:25:07.281756 (XEN) *** Dumping Dom0 vcpu#0 state: *** Oct 3 18:25:07.281756 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Oct 3 18:25:07.283652 Not tainted ]---- Oct 3 18:25:07.293689 (XEN) CPU: 0 Oct 3 18:25:07.293693 (XEN) PC: c031ce28 Oct 3 18:25:07.293717 (XEN) CPSR: 60070093 MODE:32-bit Guest SVC Oct 3 18:25:07.293742 (XEN) R0: 00000005 R1: 00000000 R2: 00576a41 R3: c031ce20 Oct 3 18:25:07.305640 (XEN) R4: c1909d80 R5: c1b12200 R6: c1904d1c R7: c1904d78 Oct 3 18:25:07.305674 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c00 Oct 3 18:25:07.317676 (XEN) USR: SP: beaa26d0 LR: b6e716c5 Oct 3 18:25:07.317685 (XEN) SVC: SP: c1901f40 LR: c0308df0 SPSR:60070013 Oct 3 18:25:07.317711 (XEN) ABT: SP: c1b22b10 LR: c0300ea0 SPSR:600f0193 Oct 3 18:25:07.329710 (XEN) UND: SP: c1b22b20 LR: c0300fa0 SPSR:60070093 Oct 3 18:25:07.329710 (XEN) IRQ: SP: c1b22b00 LR: c0300ba0 SPSR:60070193 Oct 3 18:25:07.341681 (XEN) FIQ: SP: c1b22b30 LR: c1b22b30 SPSR:00000000 Oct 3 18:25:07.341702 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 18:25:07.341731 (XEN) Oct 3 18:25:07.353684 (XEN) SCTLR: 10c5387d Oct 3 18:25:07.353700 (XEN) TCR: 00000000 Oct 3 18:25:07.353724 (XEN) TTBR0: 0000000063bac06a Oct 3 18:25:07.353748 (XEN) TTBR1: 000000006020406a Oct 3 18:25:07.353772 (XEN) IFAR: b6e6dcfc, IFSR: 00000007 Oct 3 18:25:07.365723 (XEN) DFAR: 004f6318, DFSR: 0000081f Oct 3 18:25:07.365723 (XEN) Oct 3 18:25:07.365733 (XEN) VTCR_EL2: 80003558 Oct 3 18:25:07.365757 (XEN) VTTBR_EL2: 00010000bef8a000 Oct 3 18:25:07.377685 (XEN) Oct 3 18:25:07.377697 (XEN) SCTLR_EL2: 30cd187f Oct 3 18:25:07.377722 (XEN) HCR_EL2: 007c663f Oct 3 18:25:07.377745 (XEN) TTBR0_EL2: 000000004111d000 Oct 3 18:25:07.377769 (XEN) Oct 3 18:25:07.377790 (XEN) ESR_EL2: 07e00000 Oct 3 18:25:07.389685 (XEN) HPFAR_EL2: 00104810 Oct 3 18:25:07.389698 (XEN) HDFAR: e0807f00 Oct 3 18:25:07.389741 (XEN) HIFAR: c0a19dbc Oct 3 18:25:07.389766 (XEN) Oct 3 18:25:07.389787 (XEN) Guest stack trace from sp=c1901f40: Oct 3 18:25:07.401685 (XEN) Failed to convert stack to physical address Oct 3 18:25:07.401700 (XEN) *** Dumping Dom0 vcpu#1 state: *** Oct 3 18:25:07.401725 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 18:25:07.413687 (XEN) CPU: 0 Oct 3 18:25:07.413699 (XEN) PC: c031ce28 Oct 3 18:25:07.413723 (XEN) CPSR: 600d0093 MODE:32-bit Guest SVC Oct 3 18:25:07.413748 (XEN) R0: 00000005 R1: 00000000 R2: 0033dc01 R3: c031ce20 Oct 3 18:25:07.425682 (XEN) R4: c210e600 R5: c1b12200 R6: c1904d1c R7: c1904d78 Oct 3 18:25:07.425700 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c00 Oct 3 18:25:07.437685 (XEN) USR: SP: bec34948 LR: b6b82893 Oct 3 18:25:07.437703 (XEN) SVC: SP: e08c9f90 LR: c0308df0 SPSR:600d0013 Oct 3 18:25:07.437729 (XEN) ABT: SP: c1b22b50 LR: c03011c0 SPSR:600d0193 Oct 3 18:25:07.449680 (XEN) UND: SP: c1b22b60 LR: c0300fa0 SPSR:600d0093 Oct 3 18:25:07.449704 (XEN) IRQ: SP: c1b22b40 LR: c0300ba0 SPSR:600d0193 Oct 3 18:25:07.461670 (XEN) FIQ: SP: c1b22b70 LR: c1b22b70 SPSR:00000000 Oct 3 18:25:07.461679 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 18:25:07.473683 (XEN) Oct 3 18:25:07.473698 (XEN) SCTLR: 10c5387d Oct 3 18:25:07.473722 (XEN) TCR: 00000000 Oct 3 18:25:07.473745 (XEN) TTBR0: 000000006231806a Oct 3 18:25:07.473768 (XEN) TTBR1: 000000006020406a Oct 3 18:25:07.485680 (XEN) IFAR: b6e7a814, IFSR: 00000007 Oct 3 18:25:07.485696 (XEN) DFAR: b6b6a73b, DFSR: 00000017 Oct 3 18:25:07.485721 (XEN) Oct 3 18:25:07.485743 (XEN) VTCR_EL2: 80003558 Oct 3 18:25:07.485766 (XEN) VTTBR_EL2: 00010000bef8a000 Oct 3 18:25:07.497685 (XEN) Oct 3 18:25:07.497695 (XEN) SCTLR_EL2: 30cd187f Oct 3 18:25:07.497719 (XEN) HCR_EL2: 007c663f Oct 3 18:25:07.497742 (XEN) TTBR0_EL2: 000000004111d000 Oct 3 18:25:07.497765 (XEN) Oct 3 18:25:07.497786 (XEN) ESR_EL2: 07e00000 Oct 3 18:25:07.509686 (XEN) HPFAR_EL2: 00104810 Oct 3 18:25:07.509700 (XEN) HDFAR: e0807f00 Oct 3 18:25:07.509724 (XEN) HIFAR: c0a19dbc Oct 3 18:25:07.509747 (XEN) Oct 3 18:25:07.509767 (XEN) Guest stack trace from sp=e08c9f90: Oct 3 18:25:07.521657 (XEN) Failed to convert stack to physical address Oct 3 18:25:07.521675 Oct 3 18:25:09.277934 (XEN) 'H' pressed -> dumping heap info (now = 1541000313375) Oct 3 18:25:09.297953 (XEN) heap[node=0][zone=0] -> 16279 pages Oct 3 18:25:09.297953 (XEN) heap[node=0][zone=1] -> 0 Oct 3 18:25:09.299393 pages Oct 3 18:25:09.309784 (XEN) heap[node=0][zone=2] -> 0 pages Oct 3 18:25:09.309814 (XEN) heap[node=0][zone=3] -> 0 pages Oct 3 18:25:09.309839 (XEN) heap[node=0][zone=4] -> 0 pages Oct 3 18:25:09.309943 (XEN) heap[node=0][zone=5] -> 0 pages Oct 3 18:25:09.321634 (XEN) heap[node=0][zone=6] -> 0 pages Oct 3 18:25:09.321666 (XEN) heap[node=0][zone=7] -> 0 pages Oct 3 18:25:09.321690 (XEN) heap[node=0][zone=8] -> 0 pages Oct 3 18:25:09.333648 (XEN) heap[node=0][zone=9] -> 0 pages Oct 3 18:25:09.333754 (XEN) heap[node=0][zone=10] -> 0 pages Oct 3 18:25:09.333754 (XEN) heap[node=0][zone=11] -> 0 pages Oct 3 18:25:09.333754 (XEN) heap[node=0][zone=12] -> 0 pages Oct 3 18:25:09.345694 (XEN) heap[node=0][zone=13] -> 0 pages Oct 3 18:25:09.345726 (XEN) heap[node=0][zone=14] -> 0 pages Oct 3 18:25:09.345751 (XEN) heap[node=0][zone=15] -> 0 pages Oct 3 18:25:09.357675 (XEN) heap[node=0][zone=16] -> 0 pages Oct 3 18:25:09.357708 (XEN) heap[node=0][zone=17] -> 0 pages Oct 3 18:25:09.357732 (XEN) heap[node=0][zone=18] -> 0 pages Oct 3 18:25:09.357757 (XEN) heap[node=0][zone=19] -> 130813 pages Oct 3 18:25:09.369648 (XEN) heap[node=0][zone=20] -> 241605 pages Oct 3 18:25:09.369680 (XEN) heap[node=0][zone=21] -> 0 pages Oct 3 18:25:09.369721 (XEN) heap[node=0][zone=22] -> 0 pages Oct 3 18:25:09.381658 (XEN) heap[node=0][zone=23] -> 0 pages Oct 3 18:25:09.381687 (XEN) heap[node=0][zone=24] -> 0 pages Oct 3 18:25:09.381711 (XEN) heap[node=0][zone=25] -> 0 pages Oct 3 18:25:09.393665 (XEN) heap[node=0][zone=26] -> 0 pages Oct 3 18:25:09.393697 (XEN) heap[node=0][zone=27] -> 0 pages Oct 3 18:25:09.393722 (XEN) heap[node=0][zone=28] -> 0 pages Oct 3 18:25:09.393746 Oct 3 18:25:11.342428 Oct 3 18:25:13.019371 Oct 3 18:25:13.429429 Oct 3 18:25:15.026406 Oct 3 18:25:15.254745 (XEN) Dumping timer queues: Oct 3 18:25:15.269678 (XEN) CPU00: Oct 3 18:25:15.269706 (XEN) ex= 46110us timer=43fdc968 cb=arch/arm/vtimer.c#virt_timer_expired(43fdc960) Oct 3 18:25:15.269747 ( Oct 3 18:25:15.272174 XEN) CPU01: Oct 3 18:25:15.281657 (XEN) ex= 35837us timer=43fee968 cb=arch/arm/vtimer.c#virt_timer_expired(43fee960) Oct 3 18:25:15.281704 Oct 3 18:25:17.245297 Oct 3 18:25:19.035886 Oct 3 18:25:19.274705 (XEN) 'd' pressed -> dumping registers Oct 3 18:25:19.289684 (XEN) Oct 3 18:25:19.289711 (XEN) *** Dumping CPU0 host state: *** Oct 3 18:25:19.289736 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Oct 3 18:25:19.290960 Not tainted ]---- Oct 3 18:25:19.301650 (XEN) CPU: 0 Oct 3 18:25:19.301677 (XEN) PC: 00269e8c arch/arm/domain.c#idle_loop+0x134/0x1b0 Oct 3 18:25:19.301704 (XEN) CPSR: 6003005a MODE:Hypervisor Oct 3 18:25:19.313672 (XEN) R0: 00000000 R1: 00000001 R2: 00000000 R3: 00000000 Oct 3 18:25:19.313702 (XEN) R4: 00000000 R5: 00310108 R6: 0034333c R7: 00000001 Oct 3 18:25:19.313729 (XEN) R8: 00340108 R9: 00000000 R10:40e00000 R11:4003ff54 R12:fffffffc Oct 3 18:25:19.325645 (XEN) HYP: SP: 4003ff44 LR: 0022c2d0 Oct 3 18:25:19.325673 (XEN) Oct 3 18:25:19.325694 (XEN) VTCR_EL2: 80003558 Oct 3 18:25:19.337657 (XEN) VTTBR_EL2: 00010000bef8a000 Oct 3 18:25:19.337685 (XEN) Oct 3 18:25:19.337707 (XEN) SCTLR_EL2: 30cd187f Oct 3 18:25:19.337731 (XEN) HCR_EL2: 007c663f Oct 3 18:25:19.337754 (XEN) TTBR0_EL2: 000000004111d000 Oct 3 18:25:19.349662 (XEN) Oct 3 18:25:19.349688 (XEN) ESR_EL2: 07e00000 Oct 3 18:25:19.349711 (XEN) HPFAR_EL2: 00104810 Oct 3 18:25:19.349739 (XEN) HDFAR: e0807f00 Oct 3 18:25:19.349776 (XEN) HIFAR: c0a19dbc Oct 3 18:25:19.349804 (XEN) Oct 3 18:25:19.349825 (XEN) Xen stack trace from sp=4003ff44: Oct 3 18:25:19.361651 (XEN) 07e00000 002ac008 002a102c 4003ff4c 00272664 00000000 00000000 00000000 Oct 3 18:25:19.361682 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 18:25:19.373664 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 18:25:19.385659 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 18:25:19.385690 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 18:25:19.397666 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 18:25:19.397696 (XEN) Xen call trace: Oct 3 18:25:19.397719 (XEN) [<00269e8c>] arch/arm/domain.c#idle_loop+0x134/0x1b0 (PC) Oct 3 18:25:19.409664 (XEN) [<0022c2d0>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 18:25:19.409694 (XEN) [<00272664>] arch_get_xen_caps+0/0x90 Oct 3 18:25:19.421620 (XEN) Oct 3 18:25:19.421645 (XEN) *** Dumping CPU1 host state: *** Oct 3 18:25:19.421670 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 18:25:19.421696 (XEN) CPU: 1 Oct 3 18:25:19.433668 (XEN) PC: 00269e8c arch/arm/domain.c#idle_loop+0x134/0x1b0 Oct 3 18:25:19.433739 (XEN) CPSR: 600f005a MODE:Hypervisor Oct 3 18:25:19.433768 (XEN) R0: 00000000 R1: 00000001 R2: 3fcf6000 R3: 00000000 Oct 3 18:25:19.445667 (XEN) R4: 00000001 R5: 00310108 R6: 0034333c R7: 00000002 Oct 3 18:25:19.445696 (XEN) R8: 00340108 R9: 00000001 R10:40e00000 R11:4000ff54 R12:fffffffc Oct 3 18:25:19.457658 (XEN) HYP: SP: 4000ff44 LR: 0022c2d0 Oct 3 18:25:19.457686 (XEN) Oct 3 18:25:19.457707 (XEN) VTCR_EL2: 80003558 Oct 3 18:25:19.457730 (XEN) VTTBR_EL2: 00010000bef8a000 Oct 3 18:25:19.469687 (XEN) Oct 3 18:25:19.469716 (XEN) SCTLR_EL2: 30cd187f Oct 3 18:25:19.469740 (XEN) HCR_EL2: 007c663f Oct 3 18:25:19.469763 (XEN) TTBR0_EL2: 00000000ba004000 Oct 3 18:25:19.469787 (XEN) Oct 3 18:25:19.469808 (XEN) ESR_EL2: 07e00000 Oct 3 18:25:19.481665 (XEN) HPFAR_EL2: 00104810 Oct 3 18:25:19.481691 (XEN) HDFAR: e0807f00 Oct 3 18:25:19.481715 (XEN) HIFAR: c0a19dbc Oct 3 18:25:19.481738 (XEN) Oct 3 18:25:19.481759 (XEN) Xen stack trace from sp=4000ff44: Oct 3 18:25:19.493704 (XEN) 07e00000 00311390 00000001 4000ff3c 00272f48 00000000 00000000 00000000 Oct 3 18:25:19.493761 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 18:25:19.505654 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 18:25:19.505686 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 18:25:19.517677 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 18:25:19.517711 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 18:25:19.529704 (XEN) Xen call trace: Oct 3 18:25:19.529760 (XEN) [<00269e8c>] arch/arm/domain.c#idle_loop+0x134/0x1b0 (PC) Oct 3 18:25:19.541667 (XEN) [<0022c2d0>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 18:25:19.541698 (XEN) [<00272f48>] start_secondary+0x208/0x20c Oct 3 18:25:19.541724 (XEN) Oct 3 18:25:19.541745 Oct 3 18:25:21.290631 (XEN) 'e' pressed -> dumping event-channel info Oct 3 18:25:21.309703 (XEN) Event channel information for domain 0: Oct 3 18:25:21.309703 (XEN) Polling vCPUs: {} Oct 3 18:25:21.309703 (XEN) port Oct 3 18:25:21.311624 [p/m/s] Oct 3 18:25:21.321665 (XEN) 1 [0/0/ - ]: s=3 n=1 x=0 d=0 p=4 Oct 3 18:25:21.321697 (XEN) 2 [0/0/ - ]: s=5 n=0 x=0 v=2 Oct 3 18:25:21.321722 (XEN) 3 [0/0/ - ]: s=5 n=1 x=0 v=3 Oct 3 18:25:21.333636 (XEN) 4 [0/0/ - ]: s=3 n=0 x=0 d=0 p=1 Oct 3 18:25:21.333636 Oct 3 18:25:23.314636 (XEN) gnttab_usage_print_all [ key 'g' pressed Oct 3 18:25:23.333699 (XEN) -------- active -------- -------- shared -------- Oct 3 18:25:23.333742 (XEN) [ref] localdo Oct 3 18:25:23.336125 m mfn pin localdom gmfn flags Oct 3 18:25:23.345713 (XEN) grant-table for remote d0 (v1) Oct 3 18:25:23.345768 (XEN) 1 frames (64 max), 4 maptrack frames (1024 max) Oct 3 18:25:23.357752 (XEN) no active grant table entries Oct 3 18:25:23.357806 (XEN) gnttab_usage_print_all ] done Oct 3 18:25:23.357851 Oct 3 18:25:25.327328 Oct 3 18:25:27.092950 Oct 3 18:25:27.322941 (XEN) Physical memory information: Oct 3 18:25:27.337634 (XEN) Xen heap: 65116kB free Oct 3 18:25:27.337634 (XEN) heap[19]: Oct 3 18:25:27.339025 523252kB free Oct 3 18:25:27.353620 (XEN) heap[20]: 966420kB free Oct 3 18:25:27.353660 (XEN) Dom heap: 1489672kB free Oct 3 18:25:27.353688 Oct 3 18:25:29.335736 Oct 3 18:25:31.100131 Oct 3 18:25:31.339922 (XEN) sched_smt_power_savings: disabled Oct 3 18:25:31.365806 (XEN) NOW=1563071666125 Oct 3 18:25:31.365848 (XEN) Online Cpus: 0-1 Oct 3 18:25:31.365891 (XEN) Cpupool 0: Oct 3 18:25:31.365931 (XEN) Cpus: 0-1 Oct 3 18:25:31.365971 (XEN) Sched Oct 3 18:25:31.368048 uling granularity: cpu, 1 CPU per sched-resource Oct 3 18:25:31.377710 (XEN) Scheduler: SMP Credit Scheduler rev2 (credit2) Oct 3 18:25:31.377764 (XEN) Active queues: 1 Oct 3 18:25:31.377788 (XEN) default-weight = 256 Oct 3 18:25:31.389758 (XEN) Runqueue 0: Oct 3 18:25:31.389813 (XEN) ncpus = 2 Oct 3 18:25:31.389856 (XEN) cpus = 0-1 Oct 3 18:25:31.389898 (XEN) max_weight = 256 Oct 3 18:25:31.401743 (XEN) pick_bias = 0 Oct 3 18:25:31.401802 (XEN) instload = 0 Oct 3 18:25:31.401846 (XEN) aveload = 1816 (~0%) Oct 3 18:25:31.401918 (XEN) idlers: 2 Oct 3 18:25:31.401952 (XEN) tickled: 0 Oct 3 18:25:31.417106 (XEN) fully idle cores: 2 Oct 3 18:25:31.417189 (XEN) Domain info: Oct 3 18:25:31.417322 (XEN) Domain: 0 w 256 c 0 v 2 Oct 3 18:25:31.417376 (XEN) 1: [0.0] flags=0 cpu=1 credit=7789795 [w=256] load=1005 (~0%) Oct 3 18:25:31.425742 (XEN) 2: [0.1] flags=0 cpu=0 credit=6903084 [w=256] load=798 (~0%) Oct 3 18:25:31.425808 (XEN) Runqueue 0: Oct 3 18:25:31.437713 (XEN) CPU[00] runq=0, sibling={0}, core={0-1} Oct 3 18:25:31.437743 (XEN) CPU[01] runq=0, sibling={1}, core={0-1} Oct 3 18:25:31.437769 (XEN) run: [0.0] flags=2 cpu=1 credit=7789795 [w=256] load=996 (~0%) Oct 3 18:25:31.449744 (XEN) RUNQ: Oct 3 18:25:31.449776 (XEN) CPUs info: Oct 3 18:25:31.449800 (XEN) CPU[00] current=d[IDLE]v0, curr=d[IDLE]v0, prev=NULL Oct 3 18:25:31.449826 (XEN) CPU[01] current=d[IDLE]v1, curr=d[IDLE]v1, prev=NULL Oct 3 18:25:31.461711 Oct 3 18:25:33.342634 Oct 3 18:25:35.113658 Oct 3 18:25:35.356513 (XEN) Synced stime skew: max=125ns avg=125ns samples=1 current=125ns Oct 3 18:25:35.372983 (XEN) Synced cycles skew: max=2 avg=2 samples=1 current=2 Oct 3 18:25:35.372983 Oct 3 18:25:35.374801 Oct 3 18:25:37.366487 Oct 3 18:25:39.123942 Oct 3 18:25:39.365242 Oct 3 18:25:41.131303 Oct 3 18:25:41.359944 Oct 3 18:25:43.139011 Oct 3 18:25:53.371406 (XEN) 'q' pressed -> dumping domain info (now = 1585096610666) Oct 3 18:25:53.393856 (XEN) General information for domain 0: Oct 3 18:25:53.393856 (XEN) refcnt=3 dying=0 paus Oct 3 18:25:53.396180 e_count=0 Oct 3 18:25:53.405604 (XEN) nr_pages=131072 xenheap_pages=2 dirty_cpus={} max_pages=131072 Oct 3 18:25:53.405634 (XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=00000020 Oct 3 18:25:53.417813 (XEN) p2m mappings for domain 0 (vmid 1): Oct 3 18:25:53.417878 (XEN) 1G mappings: 0 (shattered 0) Oct 3 18:25:53.417925 (XEN) 2M mappings: 235 (shattered 21) Oct 3 18:25:53.429674 (XEN) 4K mappings: 5785 Oct 3 18:25:53.429674 (XEN) Rangesets belonging to domain 0: Oct 3 18:25:53.429674 (XEN) Interrupts { 32-72, 74, 77-79, 82-84, 86, 88-100, 103-104, 107-110, 114, 116-120, 123, 126-128, 138, 144, 146-147, 149-151, 156 } Oct 3 18:25:53.441667 (XEN) I/O Memory { 2020-2050, 3810-3811, 3830-3831, 3860-3861, 10000-10001, 10010-10045, 10050-10055, 10060-10061, 101b0-101b1, 101d0-101d1, 101e0-101e1, 10440-10441, 10800-10801, 10830-10831, 10850-10851, 10a60-10a61, 10d10-10d11, 11000-11010, 11200-11201, 11210-11211, 11400-11401, 11800-11805, 11c00-11c01, 11c10-11c11, 11d40-11d41, 11f20-11f21, 12000-12010, 12100-12101, 12110-12111, 12120-12121, 12130-12131, 12170-12171, 121a0-121a1, 121b0-121b1, 121d0-121d1, 12200-12201, 12210-12211, 12220-12221, 12230-12231, 12250-12251, 122f0-122f1, 12c00-12c01, 12c10-12c11, 12c30-12c31, 12c60-12c61, 12c70-12c71, 12c80-12c81, 12c90-12c91, 12ca0-12ca1, 12cb0-12cb1, 12cc0-12cc1, 12cd0-12cd1, 12ce0-12ce1, 12d10-12d11, 12d20-12d21, 12d30-12d31, 12d40-12d41, 12d60-12d61, 12d70-12d71, 12dd0-12dd1, 13260-13261, 13270-13271, 13280-13281, 13290-13291, 132a0-132a1, 132b0-132b1, 132c0-132c1, 132d0-132d1, 132e0-132e1, 132f0-132f1, 13400-13401, 13c40-13c41, 13c50-13c51, 13e00-13e01, 13e10-13e11, 13e20-13e21, 13e30-13e31, 13e80-13e81, 13e90-13e91, 13ea0-13ea1, 13eb0-13eb1, 14400-14440, 14450-14460, 14500-14510, 14530-145a0, 145b0-145b1, 14640-14641, 14650-14651 } Oct 3 18:25:53.537836 (XEN) NODE affinity for domain 0: [0] Oct 3 18:25:53.549720 (XEN) VCPU information and callbacks for domain 0: Oct 3 18:25:53.549720 (XEN) UNIT0 affinities: hard={0-1} soft={0-1} Oct 3 18:25:53.549720 (XEN) VCPU0: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 18:25:53.561774 (XEN) pause_count=0 pause_flags=1 Oct 3 18:25:53.561838 (XEN) GICH_LRs (vcpu 0) mask=0 Oct 3 18:25:53.561883 (XEN) VCPU_LR[0]=0 Oct 3 18:25:53.573799 (XEN) VCPU_LR[1]=0 Oct 3 18:25:53.573855 (XEN) VCPU_LR[2]=0 Oct 3 18:25:53.573897 (XEN) VCPU_LR[3]=0 Oct 3 18:25:53.573939 (XEN) No periodic timer Oct 3 18:25:53.573980 (XEN) UNIT1 affinities: hard={0-1} soft={0-1} Oct 3 18:25:53.585717 (XEN) VCPU1: CPU0 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 18:25:53.585752 (XEN) pause_count=0 pause_flags=1 Oct 3 18:25:53.585777 (XEN) GICH_LRs (vcpu 1) mask=0 Oct 3 18:25:53.597741 (XEN) VCPU_LR[0]=0 Oct 3 18:25:53.597796 (XEN) VCPU_LR[1]=0 Oct 3 18:25:53.597838 (XEN) VCPU_LR[2]=0 Oct 3 18:25:53.597880 (XEN) VCPU_LR[3]=0 Oct 3 18:25:53.597920 (XEN) No periodic timer Oct 3 18:25:53.609679 (XEN) Notifying guest 0:0 (virq 1, port 0) Oct 3 18:25:53.609732 (XEN) Notifying guest 0:1 (virq 1, port 0) Oct 3 18:25:53.609777 Oct 3 18:26:05.383922 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 18:26:05.409765 Oct 3 18:26:05.409819 arndale-westfield login: Oct 3 18:26:05.411658 [ 1663.401100] sd 0:0:0:0: [sda] Synchronizing SCSI cache Oct 3 18:27:16.981767 [ 1663.410157] wake enabled for irq 119 (gpx1-4) Oct 3 18:27:16.993744 [ 1663.413143] wake enabled for irq 120 (gpx1-5) Oct 3 18:27:16.993804 [ 1663.417569] wake enabled for irq 121 (gpx1-6) Oct 3 18:27:17.005739 [ 1663.422057] wake enabled for irq 122 (gpx1-7) Oct 3 18:27:17.005800 [ 1663.426443] wake enabled for irq 123 (gpx2-0) Oct 3 18:27:17.005848 [ 1663.430889] wake enabled for irq 124 (gpx2-1) Oct 3 18:27:17.017710 [ 1663.435788] reboot: Rest Oct 3 18:27:17.353703 Oct 3 18:27:17.353758 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 18:27:17.365720 Oct 3 18:27:17.365749 CPU: Exynos5250@1000MHz Oct 3 18:27:17.365774 Oct 3 18:27:17.365795 Board: Arndale Oct 3 18:27:17.365818 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 18:27:17.365844 ready Oct 3 18:27:17.365865 DRAM: 2 GiB Oct 3 18:27:17.365887 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 18:27:17.389596 trace: enabled Oct 3 18:27:17.425639 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 18:27:17.785702 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 18:27:17.845737 In: serial Oct 3 18:27:17.845792 Out: serial Oct 3 18:27:17.845834 Err: serial Oct 3 18:27:17.845874 SCSI: ARNDALE SCSI INIT Oct 3 18:27:17.845917 Target spinup took 0 ms. Oct 3 18:27:17.857706 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 18:27:17.857768 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 18:27:17.869839 Net: Net Initialization Skipped Oct 3 18:27:17.869898 No ethernet found. Oct 3 18:27:17.869940 Hostname: arndale-westfield Oct 3 18:27:17.869982 Hit any key to stop autoboot: 2  1  0 Oct 3 18:27:19.793777 (Re)start USB... Oct 3 18:27:19.793852 USB0: USB EHCI 1.00 Oct 3 18:27:19.805714 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 18:27:25.397777 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 18:27:25.409729 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 18:27:25.844862 Waiting for Ethernet connection... done. Oct 3 18:27:27.588859 BOOTP broadcast 1 Oct 3 18:27:27.600829 EHCI timed out on TD - token=0x8008d80 Oct 3 18:27:32.392836 BOOTP broadcast 2 Oct 3 18:27:32.404834 DHCP client bound to address 10.149.64.45 (5006 ms) Oct 3 18:27:32.404834 Using asx0 device Oct 3 18:27:32.404834 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 18:27:32.416865 Filename 'pxelinux.0'. Oct 3 18:27:32.416865 Load address: 0x43e00000 Oct 3 18:27:32.416865 Loading: *### Oct 3 18:27:32.428902 2.7 MiB/s Oct 3 18:27:32.429030 done Oct 3 18:27:32.429030 Bytes transferred = 42430 (a5be hex) Oct 3 18:27:32.429160 missing environment variable: pxeuuid Oct 3 18:27:32.440930 Retrieving file: pxelinux.cfg/0A95402D Oct 3 18:27:32.440930 Using asx0 device Oct 3 18:27:32.440930 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 18:27:32.452895 Filename 'pxelinux.cfg/0A95402D'. Oct 3 18:27:32.452895 Load address: 0x51000000 Oct 3 18:27:32.452895 Loading: *# Oct 3 18:27:32.452895 355.5 KiB/s Oct 3 18:27:32.452895 done Oct 3 18:27:32.452895 Bytes transferred = 728 (2d8 hex) Oct 3 18:27:32.464844 Config file found Oct 3 18:27:32.464844 Ignoring unknown command: serial Oct 3 18:27:32.464844 1: ^Overwrite Oct 3 18:27:32.464844 Retrieving file: /osstest/tmp//arndale-westfield--initrd.gz Oct 3 18:27:32.464844 Using asx0 device Oct 3 18:27:32.476822 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 18:27:32.476822 Filename '/osstest/tmp//arndale-westfield--initrd.gz'. Oct 3 18:27:32.476822 Load address: 0x43300000 Oct 3 18:27:32.488765 Loading: *################################################################# Oct 3 18:27:32.809659 ################################################################# Oct 3 18:27:33.109721 ################################################################# Oct 3 18:27:33.409748 ################################################################# Oct 3 18:27:33.745803 ################################################################# Oct 3 18:27:34.081683 ################################################################# Oct 3 18:27:34.417700 ################################################################# Oct 3 18:27:34.741673 ################################################################# Oct 3 18:27:35.077660 ################################################################# Oct 3 18:27:35.401666 ################################################################# Oct 3 18:27:35.725667 ################################################################# Oct 3 18:27:36.064800 ################################################################# Oct 3 18:27:36.392950 ################################################################# Oct 3 18:27:36.728752 ################################################################# Oct 3 18:27:37.056936 ################################################################# Oct 3 18:27:37.380958 ################################################################# Oct 3 18:27:37.705002 ################################################################# Oct 3 18:27:38.040990 ################################################################# Oct 3 18:27:38.364749 ################################################################# Oct 3 18:27:38.677658 ################################################################# Oct 3 18:27:38.977810 ################################################################# Oct 3 18:27:39.253760 ################################################################# Oct 3 18:27:39.529630 ################################################################# Oct 3 18:27:39.793752 ################################################################# Oct 3 18:27:40.045704 ################################################################# Oct 3 18:27:40.301672 ################################################################# Oct 3 18:27:40.565675 ################################################################# Oct 3 18:27:40.829689 ######################################## Oct 3 18:27:40.985703 2.8 MiB/s Oct 3 18:27:40.985768 done Oct 3 18:27:40.985807 Bytes transferred = 26339182 (191e76e hex) Oct 3 18:27:40.997722 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/linux Oct 3 18:27:41.009671 Using asx0 device Oct 3 18:27:41.009701 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 18:27:41.009728 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/linux'. Oct 3 18:27:41.021642 Load address: 0x42000000 Oct 3 18:27:41.021673 Loading: *################################################################# Oct 3 18:27:41.321667 ################################################################# Oct 3 18:27:41.637643 ################################################################# Oct 3 18:27:41.925677 ################################################################# Oct 3 18:27:42.237755 ################################################################# Oct 3 18:27:42.513702 ############################################# Oct 3 18:27:42.693749 3 MiB/s Oct 3 18:27:42.693806 done Oct 3 18:27:42.693846 Bytes transferred = 5427712 (52d200 hex) Oct 3 18:27:42.705763 append: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=56763 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 18:27:42.741771 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb Oct 3 18:27:42.753792 Using asx0 device Oct 3 18:27:42.753846 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 18:27:42.753895 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb'. Oct 3 18:27:42.765775 Load address: 0x43000000 Oct 3 18:27:42.765830 Loading: *#### Oct 3 18:27:42.789743 2.6 MiB/s Oct 3 18:27:42.789798 done Oct 3 18:27:42.789838 Bytes transferred = 46686 (b65e hex) Oct 3 18:27:42.789883 Kernel image @ 0x42000000 [ 0x000000 - 0x52d200 ] Oct 3 18:27:42.789928 ## Flattened Device Tree blob at 43000000 Oct 3 18:27:42.801745 Booting using the fdt blob at 0x43000000 Oct 3 18:27:42.801803 Loading Ramdisk to 4e6e1000, end 4ffff76e ... OK Oct 3 18:27:43.221703 Loading Device Tree to 4e6d2000, end 4e6e065d ... OK Oct 3 18:27:43.233729 Oct 3 18:27:43.233781 Starting kernel ...(fake run for tracing) Oct 3 18:27:43.245710 Oct 3 18:27:43.245761 Oct 3 18:27:43.245800 Starting kernel ... Oct 3 18:27:43.245841 Oct 3 18:27:43.245878 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 18:27:49.353834 [ 0.000000] Linux version 6.1.0-25-armmp (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.106-3 (2024-08-26) Oct 3 18:27:49.365770 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 18:27:49.377741 [ 0.000000] CPU: div instructions available: patching division code Oct 3 18:27:49.377806 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 18:27:49.389808 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 18:27:49.389880 [ 0.000000] Memory policy: Data cache writealloc Oct 3 18:27:49.401753 [ 0.000000] efi: UEFI not found. Oct 3 18:27:49.401810 [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 Oct 3 18:27:49.413746 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 18:27:49.413805 [ 0.000000] Zone ranges: Oct 3 18:27:49.413850 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 18:27:49.425765 [ 0.000000] Normal empty Oct 3 18:27:49.425823 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 18:27:49.425872 [ 0.000000] Movable zone start for each node Oct 3 18:27:49.437730 [ 0.000000] Early memory node ranges Oct 3 18:27:49.437788 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 18:27:49.437837 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 18:27:49.449759 [ 0.000000] percpu: Embedded 18 pages/cpu s44692 r8192 d20844 u73728 Oct 3 18:27:49.461643 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 18:27:49.461679 [ 0.000000] Kernel command line: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=56763 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 18:27:49.509732 [ 0.000000] Unknown kernel command line parameters "preseed --- vga=normal auto=true hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=56763 domain=test-lab.xenproject.org", will be passed to user space. Oct 3 18:27:49.545752 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 18:27:49.557739 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 18:27:49.557808 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 18:27:49.569750 [ 0.000000] Memory: 2015968K/2097152K available (11264K kernel code, 1696K rwdata, 3724K rodata, 2048K init, 376K bss, 64800K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 18:27:49.581749 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 18:27:49.593747 [ 0.000000] ftrace: allocating 39612 entries in 117 pages Oct 3 18:27:49.593810 [ 0.000000] ftrace: allocated 117 pages with 5 groups Oct 3 18:27:49.605741 [ 0.000000] trace event string verifier disabled Oct 3 18:27:49.605802 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 18:27:49.605850 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 18:27:49.617741 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 18:27:49.617803 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 18:27:49.629770 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 18:27:49.629871 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 18:27:49.641647 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 18:27:49.641681 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 18:27:49.653763 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 18:27:49.653835 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 18:27:49.665766 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 18:27:49.665891 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 18:27:49.677776 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 18:27:49.689643 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 18:27:49.689681 [ 0.002626] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 18:27:49.701644 [ 0.002640] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 18:27:49.713626 [ 0.002654] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 18:27:49.713662 [ 0.002666] Ignoring duplicate/late registration of read_current_timer delay Oct 3 18:27:49.725751 [ 0.003027] Console: colour dummy device 80x30 Oct 3 18:27:49.725812 [ 0.003067] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 18:27:49.737746 [ 0.003081] CPU: Testing write buffer coherency: ok Oct 3 18:27:49.749743 [ 0.003125] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 18:27:49.749817 [ 0.003133] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 18:27:49.761772 [ 0.003139] pid_max: default: 32768 minimum: 301 Oct 3 18:27:49.761834 [ 0.003499] LSM: Security Framework initializing Oct 3 18:27:49.773757 [ 0.003573] landlock: Up and running. Oct 3 18:27:49.773815 [ 0.003577] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 18:27:49.773867 [ 0.003761] AppArmor: AppArmor initialized Oct 3 18:27:49.785749 [ 0.003773] TOMOYO Linux initialized Oct 3 18:27:49.785808 [ 0.003818] LSM support for eBPF active Oct 3 18:27:49.785855 [ 0.004061] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 18:27:49.797736 [ 0.004074] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 18:27:49.809743 [ 0.005505] /cpus/cpu@0 missing clock-frequency property Oct 3 18:27:49.809804 [ 0.005532] /cpus/cpu@1 missing clock-frequency property Oct 3 18:27:49.821767 [ 0.005546] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 18:27:49.821829 [ 0.006497] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 18:27:49.833752 [ 0.006503] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 18:27:49.833814 [ 0.006606] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 18:27:49.845748 [ 0.006612] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 18:27:49.845810 [ 0.006756] Setting up static identity map for 0x40300000 - 0x403000ac Oct 3 18:27:49.857749 [ 0.007914] rcu: Hierarchical SRCU implementation. Oct 3 18:27:49.857810 [ 0.007920] rcu: Max phase no-delay instances is 1000. Oct 3 18:27:49.869772 [ 0.010031] EFI services will not be available. Oct 3 18:27:49.869832 [ 0.010378] smp: Bringing up secondary CPUs ... Oct 3 18:27:49.869880 [ 0.011119] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 18:27:49.881728 [ 0.011130] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 18:27:49.893765 [ 0.011265] smp: Brought up 1 node, 2 CPUs Oct 3 18:27:49.893825 [ 0.011274] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 18:27:49.893877 [ 0.011282] CPU: All CPU(s) started in HYP mode. Oct 3 18:27:49.905752 [ 0.011286] CPU: Virtualization extensions available. Oct 3 18:27:49.905814 [ 0.011905] devtmpfs: initialized Oct 3 18:27:49.917787 [ 0.023265] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 18:27:49.917857 [ 0.023496] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 18:27:49.929756 [ 0.023521] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 18:27:49.941762 [ 0.024039] pinctrl core: initialized pinctrl subsystem Oct 3 18:27:49.941822 [ 0.024741] DMI not present or invalid. Oct 3 18:27:49.941868 [ 0.025419] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 18:27:49.953717 [ 0.030803] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 18:27:49.953776 [ 0.032358] audit: initializing netlink subsys (disabled) Oct 3 18:27:49.965733 [ 0.032560] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 Oct 3 18:27:49.965803 [ 0.033719] thermal_sys: Registered thermal governor 'fair_share' Oct 3 18:27:49.977773 [ 0.033727] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 18:27:49.977835 [ 0.033732] thermal_sys: Registered thermal governor 'step_wise' Oct 3 18:27:49.989770 [ 0.033736] thermal_sys: Registered thermal governor 'user_space' Oct 3 18:27:50.001742 [ 0.033741] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 18:27:50.001809 [ 0.034116] No ATAGs? Oct 3 18:27:50.001852 [ 0.034185] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 18:27:50.013757 [ 0.034193] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 18:27:50.013819 [ 0.035281] Serial: AMBA PL011 UART driver Oct 3 18:27:50.025750 [ 0.084737] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 18:27:50.025819 [ 0.091767] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 18:27:50.037755 [ 0.102784] iommu: Default domain type: Translated Oct 3 18:27:50.049732 [ 0.102792] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 18:27:50.049798 [ 0.103781] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 18:27:50.061757 [ 0.104317] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 18:27:50.061819 [ 0.104329] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 18:27:50.061869 [ 0.104863] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 18:27:50.073774 [ 0.104894] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 18:27:50.085758 [ 0.105075] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 18:27:50.085818 [ 0.105428] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 18:27:50.097743 [ 0.105438] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 18:27:50.097806 [ 0.105831] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 18:27:50.109762 [ 0.106117] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 18:27:50.109823 [ 0.106128] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 18:27:50.121727 [ 0.106405] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 18:27:50.121789 [ 0.106506] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 18:27:50.121837 [ 0.106515] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 18:27:50.133747 [ 0.106715] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 18:27:50.133808 [ 0.106915] pps_core: LinuxPPS API ver. 1 registered Oct 3 18:27:50.145769 [ 0.106920] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 18:27:50.157742 [ 0.106935] PTP clock support registered Oct 3 18:27:50.157804 [ 0.108583] NetLabel: Initializing Oct 3 18:27:50.157850 [ 0.108590] NetLabel: domain hash size = 128 Oct 3 18:27:50.157895 [ 0.108595] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 18:27:50.169761 [ 0.108650] NetLabel: unlabeled traffic allowed by default Oct 3 18:27:50.169824 [ 0.108831] vgaarb: loaded Oct 3 18:27:50.181739 [ 0.109496] clocksource: Switched to clocksource mct-frc Oct 3 18:27:50.181801 [ 0.177931] VFS: Disk quotas dquot_6.6.0 Oct 3 18:27:50.181848 [ 0.178023] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 18:27:50.193758 [ 0.178758] AppArmor: AppArmor Filesystem Enabled Oct 3 18:27:50.193841 [ 0.187886] NET: Registered PF_INET protocol family Oct 3 18:27:50.205750 [ 0.188093] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 18:27:50.205820 [ 0.189726] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 18:27:50.217833 [ 0.189819] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 18:27:50.229754 [ 0.189843] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 18:27:50.229791 [ 0.189937] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 18:27:50.241802 [ 0.190166] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 18:27:50.241865 [ 0.190384] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 18:27:50.253746 [ 0.190470] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 18:27:50.265740 [ 0.190509] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 18:27:50.265806 [ 0.190710] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 18:27:50.277750 [ 0.190743] NET: Registered PF_XDP protocol family Oct 3 18:27:50.277812 [ 0.190753] PCI: CLS 0 bytes, default 64 Oct 3 18:27:50.277858 [ 0.191286] Trying to unpack rootfs image as initramfs... Oct 3 18:27:50.289752 [ 0.191683] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 18:27:50.301736 [ 0.191887] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 18:27:50.301807 [ 0.193457] Initialise system trusted keyrings Oct 3 18:27:50.313732 [ 0.193571] Key type blacklist registered Oct 3 18:27:50.313791 [ 0.193810] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 18:27:50.313843 [ 0.200967] zbud: loaded Oct 3 18:27:50.325742 [ 0.202153] integrity: Platform Keyring initialized Oct 3 18:27:50.325804 [ 0.202184] integrity: Machine keyring initialized Oct 3 18:27:50.325851 [ 0.202192] Key type asymmetric registered Oct 3 18:27:50.337754 [ 0.202200] Asymmetric key parser 'x509' registered Oct 3 18:27:50.337814 [ 1.559141] Freeing initrd memory: 25724K Oct 3 18:27:50.349730 [ 1.570634] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 18:27:50.349794 [ 1.570920] bounce: pool size: 64 pages Oct 3 18:27:50.349841 [ 1.571081] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 18:27:50.361775 [ 1.571248] io scheduler mq-deadline registered Oct 3 18:27:50.361835 [ 1.576373] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 18:27:50.373763 [ 1.597162] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 18:27:50.385740 [ 1.597174] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 18:27:50.385812 [ 1.599515] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 18:27:50.397754 [ 1.599525] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 18:27:50.409780 [ 1.600347] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 18:27:50.409848 [ 1.600356] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 18:27:50.421773 [ 1.601179] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 18:27:50.433761 [ 1.601188] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 18:27:50.445735 [ 1.603576] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 18:27:50.445809 [ 1.606410] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 18:27:50.457754 [ 1.609116] Serial: AMBA driver Oct 3 18:27:50.457812 [ 1.609356] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 18:27:50.469765 [ 1.609918] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 18:27:50.481789 [ 1.610377] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 18:27:50.481862 [ 2.748481] printk: console [ttySAC2] enabled Oct 3 18:27:50.493736 [ 2.753296] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 18:27:50.493809 [ 2.763948] STM32 USART driver initialized Oct 3 18:27:50.505761 [ 2.778100] mousedev: PS/2 mouse device common for all mice Oct 3 18:27:50.517786 [ 2.809364] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 18:27:50.553707 [ 2.817999] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T18:27:51 UTC (1727980071) Oct 3 18:27:50.565739 [ 2.827875] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 18:27:50.565802 [ 2.835331] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 18:27:50.577735 [ 2.843317] NET: Registered PF_INET6 protocol family Oct 3 18:27:50.589690 [ 2.856871] Segment Routing with IPv6 Oct 3 18:27:50.601747 [ 2.859156] In-situ OAM (IOAM) with IPv6 Oct 3 18:27:50.601806 [ 2.863112] mip6: Mobile IPv6 Oct 3 18:27:50.601851 [ 2.865949] NET: Registered PF_PACKET protocol family Oct 3 18:27:50.613759 [ 2.871104] mpls_gso: MPLS GSO support Oct 3 18:27:50.613819 [ 2.875311] ThumbEE CPU extension supported. Oct 3 18:27:50.613867 [ 2.879030] Registering SWP/SWPB emulation handler Oct 3 18:27:50.625733 [ 2.884207] registered taskstats version 1 Oct 3 18:27:50.625793 [ 2.887840] Loading compiled-in X.509 certificates Oct 3 18:27:50.625841 [ 3.348201] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 18:27:51.093780 [ 3.355547] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 18:27:51.105760 [ 3.366578] zswap: loaded using pool lzo/zbud Oct 3 18:27:51.105819 [ 3.370588] Key type .fscrypt registered Oct 3 18:27:51.105865 [ 3.373878] Key type fscrypt-provisioning registered Oct 3 18:27:51.117693 [ 3.387549] Key type encrypted registered Oct 3 18:27:51.129721 [ 3.390145] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 18:27:51.129782 [ 3.395647] ima: No TPM chip found, activating TPM-bypass! Oct 3 18:27:51.141768 [ 3.401066] ima: Allocated hash algorithm: sha256 Oct 3 18:27:51.141829 [ 3.405863] ima: No architecture policies found Oct 3 18:27:51.153736 [ 3.410296] evm: Initialising EVM extended attributes: Oct 3 18:27:51.153799 [ 3.415369] evm: security.selinux Oct 3 18:27:51.153844 [ 3.418663] evm: security.SMACK64 (disabled) Oct 3 18:27:51.165728 [ 3.422912] evm: security.SMACK64EXEC (disabled) Oct 3 18:27:51.165789 [ 3.427513] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 18:27:51.165838 [ 3.432548] evm: security.SMACK64MMAP (disabled) Oct 3 18:27:51.177750 [ 3.437144] evm: security.apparmor Oct 3 18:27:51.177808 [ 3.440532] evm: security.ima Oct 3 18:27:51.177851 [ 3.443481] evm: security.capability Oct 3 18:27:51.189684 [ 3.447042] evm: HMAC attrs: 0x1 Oct 3 18:27:51.189742 [ 4.034776] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 18:27:51.777742 [ 4.040740] clk: Disabling unused clocks Oct 3 18:27:51.777801 [ 4.054431] Freeing unused kernel image (initmem) memory: 2048K Oct 3 18:27:51.801721 [ 4.059309] Checked W+X mappings: passed, no W+X pages found Oct 3 18:27:51.801784 [ 4.064558] Run /init as init process Oct 3 18:27:51.801829 [ 4.608755] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 18:27:52.356767 [ 4.695999] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 18:27:52.440849 [ 4.696427] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 18:27:52.452668 [ 4.711389] usbcore: registered new interface driver usbfs Oct 3 18:27:52.452668 [ 4.717526] usbcore: registered new interface driver hub Oct 3 18:27:52.464821 [ 4.722039] usbcore: registered new device driver usb Oct 3 18:27:52.464821 [ 4.735674] phy phy-12130000.phy.1: phy_power_on was called before phy_init Oct 3 18:27:52.476866 [ 4.741275] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 18:27:52.488832 [ 4.746685] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Oct 3 18:27:52.488832 [ 4.755281] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Oct 3 18:27:52.500864 [ 4.757304] phy phy-12130000.phy.1: phy_power_on was called before phy_init Oct 3 18:27:52.500864 [ 4.761126] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 18:27:52.512848 [ 4.779702] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 18:27:52.524969 [ 4.784482] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 18:27:52.525054 [ 4.792532] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 18:27:52.536866 [ 4.799712] usb usb1: Product: EHCI Host Controller Oct 3 18:27:52.536866 [ 4.804571] usb usb1: Manufacturer: Linux 6.1.0-25-armmp ehci_hcd Oct 3 18:27:52.548866 [ 4.810644] usb usb1: SerialNumber: 12110000.usb Oct 3 18:27:52.548866 [ 4.816338] exynos-ohci 12120000.usb: USB Host Controller Oct 3 18:27:52.560849 [ 4.824520] hub 1-0:1.0: USB hub found Oct 3 18:27:52.560849 [ 4.827479] hub 1-0:1.0: 3 ports detected Oct 3 18:27:52.572796 [ 4.892858] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 18:27:52.632837 [ 4.900129] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Oct 3 18:27:52.644870 [ 4.929271] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Oct 3 18:27:52.668852 [ 4.934047] usb3503 usb-hub: switched to HUB mode Oct 3 18:27:52.680806 [ 4.938527] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 18:27:52.680806 [ 4.998457] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 18:27:52.740803 [ 5.005311] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 18:27:52.752864 [ 5.012499] usb usb2: Product: USB Host Controller Oct 3 18:27:52.752864 [ 5.017264] usb usb2: Manufacturer: Linux 6.1.0-25-armmp ohci_hcd Oct 3 18:27:52.764862 [ 5.023330] usb usb2: SerialNumber: 12120000.usb Oct 3 18:27:52.764862 [ 5.028883] hub 2-0:1.0: USB hub found Oct 3 18:27:52.764862 [ 5.031784] hub 2-0:1.0: 3 ports detected Oct 3 18:27:52.776806 [ 5.236120] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 18:27:52.980862 [ 5.240185] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 18:27:52.980862 [ 5.248288] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 18:27:52.992865 [ 5.257208] xhci-hcd xhci-hcd.2.auto: irq 108, io mem 0x12000000 Oct 3 18:27:53.004807 [ 5.257558] usb 1-3: new high-speed USB device number 2 using exynos-ehci Oct 3 18:27:53.004807 [ 5.263643] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 18:27:53.016866 [ 5.275412] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 18:27:53.016866 [ 5.283043] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 18:27:53.028864 [ 5.289696] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 18:27:53.040871 [ 5.297797] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 18:27:53.040871 [ 5.305008] usb usb3: Product: xHCI Host Controller Oct 3 18:27:53.052863 [ 5.309856] usb usb3: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 18:27:53.052863 [ 5.315926] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 18:27:53.052863 [ 5.321378] hub 3-0:1.0: USB hub found Oct 3 18:27:53.064883 [ 5.324569] hub 3-0:1.0: 1 port detected Oct 3 18:27:53.064914 [ 5.328941] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 18:27:53.076865 [ 5.336644] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 18:27:53.076865 [ 5.344760] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 18:27:53.088870 [ 5.351957] usb usb4: Product: xHCI Host Controller Oct 3 18:27:53.088870 [ 5.356811] usb usb4: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 18:27:53.100867 [ 5.362888] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 18:27:53.100867 [ 5.368393] hub 4-0:1.0: USB hub found Oct 3 18:27:53.112823 [ 5.371523] hub 4-0:1.0: 1 port detected Oct 3 18:27:53.112823 [ 5.437958] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Oct 3 18:27:53.184866 [ 5.444702] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 3 18:27:53.184866 [ 5.453159] hub 1-3:1.0: USB hub found Oct 3 18:27:53.196833 [ 5.455705] hub 1-3:1.0: 3 ports detected Oct 3 18:27:53.196833 Starting system log daemon: syslogd, klogd. Oct 3 18:27:53.328793 /var/run/utmp: No such file or directory Oct 3 18:27:55.164898 [?1h=(B   Oct 3 18:27:55.212969  Oct 3 18:27:55.213031 [  (-*) ][ Oct 03 18:27 ] Oct 3 18:27:55.224864 [  (0*start) ][ Oct 03 18:27 ] Oct 3 18:27:55.248882 [  (0*start) ][ Oct 03 18:27 ] Oct 3 18:27:55.260880 [  (0*start) ][ Oct 03 18:27 ] Oct 3 18:27:55.272868 [  (0*start) ][ Oct 03 18:27 ]                        [  (0*start) ][ Oct 03 18:27 ][  (0*start) ][ Oct 03 18:27 ] Oct 3 18:27:55.332870 [ 0- start  (2*shell) ][ Oct 03 18:27 ] Oct 3 18:27:55.344878 [ 0- start  (2*shell) ][ Oct 03 18:27 ] Oct 3 18:27:55.356875 [ 0- start  (2*shell) ][ Oct 03 18:27 ] Oct 3 18:27:55.368862 [ 0- start  (2*shell) ][ Oct 03 18:27 ]                        [ 0- start  (2*shell) ][ Oct 03 18:27 ][ 0- start  (2*shell) ][ Oct 03 18:27 ] Oct 3 18:27:55.428858 [ 0 start 2- shell  (3*shell) ][ Oct 03 18:27 ] Oct 3 18:27:55.440884 [ 0 start 2- shell  (3*shell) ][ Oct 03 18:27 ] Oct 3 18:27:55.452848 [ 0 start 2- shell  (3*shell) ][ Oct 03 18:27 ] Oct 3 18:27:55.464869 [ 0 start 2- shell  (3*shell) ][ Oct 03 18:27 ]                        [ 0 start 2- shell  (3*shell) ][ Oct 03 18:27 ][ 0 start 2- shell  (3*shell) ][ Oct 03 18:27 ] Oct 3 18:27:55.524843 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 18:27 ] Oct 3 18:27:55.536870 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 18:27 ] Oct 3 18:27:55.548906 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 18:27 ] Oct 3 18:27:55.560962 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 18:27 ]                        [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 18:27 ][ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 18:27 ] Oct 3 18:27:55.620960 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 18:27 ] Oct 3 18:27:55.632905 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 18:27 ] Oct 3 18:27:55.644984 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 18:27 ] Oct 3 18:27:55.656913 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 18:27 ]                        [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 18:27 ][ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 18:27 ] Oct 3 18:27:55.716875 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 18:27 ] Oct 3 18:27:55.728863 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 18:27 ] Oct 3 18:27:55.740813 [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 18:27 ] Oct 3 18:27:56.200815 Detecting network hardware ... 2%... 95%... 100% Oct 3 18:27:57.928789 [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 18:28 ] Oct 3 18:27:59.173634 Oct 3 18:27:59.173657 Detecting link on eth0; please wait... ... 0%... 10%... 20% Oct 3 18:28:02.809665 Waiting for link-local address... ... 8%... 16%... 25%... 33%... 100% Oct 3 18:28:03.841750 Attempting IPv6 autoconfiguration... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 75%... 83%... 91%... 100% Oct 3 18:28:09.913957 Configuring the network with DHCP ... 0%... 100% Oct 3 18:28:13.073539 Checking the Debian archive mirror ... 25%... 50%... 75%... 100% Oct 3 18:28:21.240675 Loading additional components ... 0%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Oct 3 18:28:54.296899 Setting up the clock ... 0%... 100% Oct 3 18:28:57.020796 Loading additional components ... 50%... 100% Oct 3 18:28:58.700712 Detecting disks and all other hardware [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 18:29 ]... 2%... 95%... 100% Oct 3 18:29:03.289758 Loading additional components ... 12%... 25%... 37%... 50%... 62%... 75%... 87%... 100% Oct 3 18:29:10.357838 Loading additional components ... 25%... 50%... 75%... 100% Oct 3 18:29:12.733866 Starting up the partitioner ... 4%... 13%... 21%... 30%... 43%... 52%... 60%... 73%... 82%... 91%... 100% Oct 3 18:29:25.745714 Guided partitioning ... 16%... 33%... 50%... 66%... 83%... 100% Oct 3 18:29:33.981723 Starting up the partitioner ... 4%... 12%... 20%... 32%... 40%... 52%... 60%... 72%... 80%... 92%... 100% Oct 3 18:29:44.900800 Partitions formatting ... 33% Oct 3 18:29:53.725717 Partitions formatting [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 18:30 ] Oct 3 18:30:02.861725 Partitions formatting Installing the base system ... 0%... 17%... 20%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 18:31 ]... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 18:32 ]... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 18:33 ]... 48%... 50%...  Oct 3 18:33:52.537623  60%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 18:34 ]... 70%... 79%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 18:35 ]... 83%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 18:36 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 18:37 ]... 91%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 18:38 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 18:39 ]... 100% Oct 3 18:39:33.305700 Configuring apt ... 7%... 14%... 14%... 21%... 35%... 42%... 50%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 18:40 ]... 60%... 71%. Oct 3 18:40:10.525597 ... 82%... 92%... 100% Oct 3 18:40:13.069605 Select and install software ... 1%... 10%... 13%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 18:41 ]... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 18:42 ]... 40%... 50%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 18:43 ]... Oct 3 18:43:04.073594 . 60%... 70%... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 18:44 ]... 88%... 90%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 18:45 ]... 94%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 18:46 ]... 100% Oct 3 18:46:08.320940 Finishing the installation ... 4%... 12%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 18:47 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 18:48 ]... 16%... 20%... 32%... 40%... 44%... Oct 3 18:48:20.585760  52%... 60%... 72%... 80%... 92% The system is going down NOW! Oct 3 18:48:30.404850 Sent SIGTERM Sent SIGKILL to all processes Oct 3 18:48:31.408923 Requesting system reboot Oct 3 18:48:31.408923 [ 1244.710229] reboot: Re˙ Oct 3 18:48:32.765683 Oct 3 18:48:32.765756 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 18:48:32.777718 Oct 3 18:48:32.777764 CPU: Exynos5250@1000MHz Oct 3 18:48:32.777808 Oct 3 18:48:32.777847 Board: Arndale Oct 3 18:48:32.777888 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 18:48:32.789654 ready Oct 3 18:48:32.789701 DRAM: 2 GiB Oct 3 18:48:32.789742 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 18:48:32.801720 trace: enabled Oct 3 18:48:32.837771 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 18:48:33.197871 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 18:48:33.257760 In: serial Oct 3 18:48:33.257828 Out: serial Oct 3 18:48:33.257870 Err: serial Oct 3 18:48:33.269726 SCSI: ARNDALE SCSI INIT Oct 3 18:48:33.269782 Target spinup took 0 ms. Oct 3 18:48:33.269827 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 18:48:33.281740 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 18:48:33.281803 Net: Net Initialization Skipped Oct 3 18:48:33.281848 No ethernet found. Oct 3 18:48:33.293692 Hostname: arndale-westfield Oct 3 18:48:33.293750 Hit any key to stop autoboot: 2  1  0 Oct 3 18:48:35.216872 (Re)start USB... Oct 3 18:48:35.216872 USB0: USB EHCI 1.00 Oct 3 18:48:35.216872 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 18:48:40.812827 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 18:48:40.824865 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 18:48:41.268836 Waiting for Ethernet connection... done. Oct 3 18:48:42.865017 BOOTP broadcast 1 Oct 3 18:48:42.865092 BOOTP broadcast 2 Oct 3 18:48:44.517098 DHCP client bound to address 10.149.64.45 (1723 ms) Oct 3 18:48:44.529081 Using asx0 device Oct 3 18:48:44.529162 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 18:48:44.529255 Filename 'pxelinux.0'. Oct 3 18:48:44.529308 Load address: 0x43e00000 Oct 3 18:48:44.541008 Loading: *### Oct 3 18:48:44.553027 2.4 MiB/s Oct 3 18:48:44.553082 done Oct 3 18:48:44.553123 Bytes transferred = 42430 (a5be hex) Oct 3 18:48:44.553169 missing environment variable: pxeuuid Oct 3 18:48:44.564912 Retrieving file: pxelinux.cfg/0A95402D Oct 3 18:48:44.564912 Using asx0 device Oct 3 18:48:44.564912 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 18:48:44.576889 Filename 'pxelinux.cfg/0A95402D'. Oct 3 18:48:44.576889 Load address: 0x51000000 Oct 3 18:48:44.576889 Loading: *# Oct 3 18:48:44.576889 31.3 KiB/s Oct 3 18:48:44.576889 done Oct 3 18:48:44.576889 Bytes transferred = 65 (41 hex) Oct 3 18:48:44.576889 Config file found Oct 3 18:48:44.588994 Ignoring unknown command: serial Oct 3 18:48:44.589057 1: local Oct 3 18:48:44.589099 scanning bus for devices... Oct 3 18:48:44.589141 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 18:48:44.612843 Type: Hard Disk Oct 3 18:48:44.612843 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 18:48:44.625031 Found 1 device(s). Oct 3 18:48:44.625092 Oct 3 18:48:44.625130 SCSI device 0: Oct 3 18:48:44.625171 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 18:48:44.636266 Type: Hard Disk Oct 3 18:48:44.636323 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 18:48:44.636375 ... is now current device Oct 3 18:48:44.636456 Scanning scsi 0... Oct 3 18:48:44.648830 Found U-Boot script /boot.scr Oct 3 18:48:44.756845 639 bytes read in 38 ms (15.6 KiB/s) Oct 3 18:48:44.809006 ## Executing script at 50000000 Oct 3 18:48:44.809056 Loading dtbs/exynos5250-arndale.dtb Oct 3 18:48:44.809093 46686 bytes read in 1672 ms (26.4 KiB/s) Oct 3 18:48:46.432858 Loading vmlinuz-6.1.0-25-armmp-lpae Oct 3 18:48:46.444823 5509632 bytes read in 186 ms (28.2 MiB/s) Oct 3 18:48:46.648849 Loading initrd.img-6.1.0-25-armmp-lpae Oct 3 18:48:46.648849 25731972 bytes read in 1948 ms (12.6 MiB/s) Oct 3 18:48:48.540896 Booting Oct 3 18:48:48.540896 Kernel image @ 0x42000000 [ 0x000000 - 0x541200 ] Oct 3 18:48:48.540896 ## Flattened Device Tree blob at 43000000 Oct 3 18:48:48.540896 Booting using the fdt blob at 0x43000000 Oct 3 18:48:48.552863 Loading Ramdisk to 4e775000, end 4ffff384 ... OK Oct 3 18:48:48.960784 Loading Device Tree to 4e766000, end 4e77465d ... OK Oct 3 18:48:48.972852 Oct 3 18:48:48.972852 Starting kernel ...(fake run for tracing) Oct 3 18:48:48.972852 Oct 3 18:48:48.972852 Oct 3 18:48:48.984844 Starting kernel ... Oct 3 18:48:48.984844 Oct 3 18:48:48.984844 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 18:48:55.141839 [ 0.000000] Linux version 6.1.0-25-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.106-3 (2024-08-26) Oct 3 18:48:55.157814 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=30c5387d Oct 3 18:48:55.173798 [ 0.000000] CPU: div instructions available: patching division code Oct 3 18:48:55.173867 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 18:48:55.189776 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 18:48:55.189847 [ 0.000000] Memory policy: Data cache writealloc Oct 3 18:48:55.205764 [ 0.000000] efi: UEFI not found. Oct 3 18:48:55.205824 [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000 Oct 3 18:48:55.205874 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 18:48:55.205920 [ 0.000000] Zone ranges: Oct 3 18:48:55.205962 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 18:48:55.221774 [ 0.000000] Normal empty Oct 3 18:48:55.221835 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 18:48:55.221886 [ 0.000000] Movable zone start for each node Oct 3 18:48:55.237758 [ 0.000000] Early memory node ranges Oct 3 18:48:55.237816 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 18:48:55.237867 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 18:48:55.253855 [ 0.000000] percpu: Embedded 18 pages/cpu s44820 r8192 d20716 u73728 Oct 3 18:48:55.253924 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 18:48:55.269659 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=ttySAC2,115200n8 Oct 3 18:48:55.269735 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 18:48:55.285645 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 18:48:55.285712 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 18:48:55.301688 [ 0.000000] Memory: 2015504K/2097152K available (12288K kernel code, 1717K rwdata, 3748K rodata, 2048K init, 383K bss, 65264K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 18:48:55.313627 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 18:48:55.313691 [ 0.000000] ftrace: allocating 39996 entries in 118 pages Oct 3 18:48:55.325637 [ 0.000000] ftrace: allocated 118 pages with 5 groups Oct 3 18:48:55.325698 [ 0.000000] trace event string verifier disabled Oct 3 18:48:55.325745 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 18:48:55.337700 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 18:48:55.337765 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 18:48:55.349731 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 18:48:55.349791 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 18:48:55.361618 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 18:48:55.361682 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 18:48:55.373633 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 18:48:55.373697 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 18:48:55.385630 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 18:48:55.385694 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 18:48:55.397630 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 18:48:55.397703 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 18:48:55.409653 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 18:48:55.421660 [ 0.002623] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 18:48:55.421723 [ 0.002637] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 18:48:55.433683 [ 0.002652] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 18:48:55.445733 [ 0.002663] Ignoring duplicate/late registration of read_current_timer delay Oct 3 18:48:55.445801 [ 0.003031] Console: colour dummy device 80x30 Oct 3 18:48:55.457655 [ 0.003074] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 18:48:55.469700 [ 0.003087] CPU: Testing write buffer coherency: ok Oct 3 18:48:55.469762 [ 0.003128] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 18:48:55.481663 [ 0.003136] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 18:48:55.481725 [ 0.003143] pid_max: default: 32768 minimum: 301 Oct 3 18:48:55.493743 [ 0.003512] LSM: Security Framework initializing Oct 3 18:48:55.493807 [ 0.003585] landlock: Up and running. Oct 3 18:48:55.493854 [ 0.003590] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 18:48:55.505565 [ 0.003778] AppArmor: AppArmor initialized Oct 3 18:48:55.505597 [ 0.003790] TOMOYO Linux initialized Oct 3 18:48:55.517648 [ 0.003836] LSM support for eBPF active Oct 3 18:48:55.517706 [ 0.004083] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 18:48:55.517790 [ 0.004097] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 18:48:55.529665 [ 0.005512] /cpus/cpu@0 missing clock-frequency property Oct 3 18:48:55.541674 [ 0.005539] /cpus/cpu@1 missing clock-frequency property Oct 3 18:48:55.541734 [ 0.005553] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 18:48:55.541784 [ 0.006504] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 18:48:55.553681 [ 0.006511] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 18:48:55.565662 [ 0.006614] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 18:48:55.565730 [ 0.006620] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 18:48:55.577640 [ 0.006761] Setting up static identity map for 0x40400000 - 0x404000ac Oct 3 18:48:55.577703 [ 0.007928] rcu: Hierarchical SRCU implementation. Oct 3 18:48:55.589659 [ 0.007933] rcu: Max phase no-delay instances is 1000. Oct 3 18:48:55.589721 [ 0.010064] EFI services will not be available. Oct 3 18:48:55.589769 [ 0.010409] smp: Bringing up secondary CPUs ... Oct 3 18:48:55.601735 [ 0.011152] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 18:48:55.601796 [ 0.011164] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 18:48:55.613687 [ 0.011308] smp: Brought up 1 node, 2 CPUs Oct 3 18:48:55.613749 [ 0.011316] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 18:48:55.625663 [ 0.011324] CPU: All CPU(s) started in HYP mode. Oct 3 18:48:55.625726 [ 0.011327] CPU: Virtualization extensions available. Oct 3 18:48:55.637658 [ 0.012187] devtmpfs: initialized Oct 3 18:48:55.637718 [ 0.023232] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 18:48:55.649652 [ 0.023466] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 18:48:55.649725 [ 0.023490] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 18:48:55.661662 [ 0.024076] pinctrl core: initialized pinctrl subsystem Oct 3 18:48:55.661723 [ 0.024802] DMI not present or invalid. Oct 3 18:48:55.673659 [ 0.025483] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 18:48:55.673723 [ 0.027034] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 18:48:55.685725 [ 0.028543] audit: initializing netlink subsys (disabled) Oct 3 18:48:55.685789 [ 0.028747] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 Oct 3 18:48:55.697705 [ 0.029922] thermal_sys: Registered thermal governor 'fair_share' Oct 3 18:48:55.697767 [ 0.029930] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 18:48:55.709664 [ 0.029934] thermal_sys: Registered thermal governor 'step_wise' Oct 3 18:48:55.709726 [ 0.029939] thermal_sys: Registered thermal governor 'user_space' Oct 3 18:48:55.721712 [ 0.029943] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 18:48:55.721775 [ 0.030144] No ATAGs? Oct 3 18:48:55.733646 [ 0.030211] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 18:48:55.733717 [ 0.030219] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 18:48:55.747428 [ 0.031302] Serial: AMBA PL011 UART driver Oct 3 18:48:55.747489 [ 0.080602] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 18:48:55.757762 [ 0.087556] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 18:48:55.769791 [ 0.091764] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages Oct 3 18:48:55.769850 [ 0.091772] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page Oct 3 18:48:55.781763 [ 0.099288] iommu: Default domain type: Translated Oct 3 18:48:55.781824 [ 0.099297] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 18:48:55.793834 [ 0.100269] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 18:48:55.793900 [ 0.100776] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 18:48:55.793948 [ 0.100788] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 18:48:55.805801 [ 0.101307] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 18:48:55.817802 [ 0.101337] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 18:48:55.817873 [ 0.101582] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 18:48:55.829794 [ 0.102081] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 18:48:55.829855 [ 0.102091] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 18:48:55.841811 [ 0.102470] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 18:48:55.841872 [ 0.102761] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 18:48:55.853782 [ 0.102770] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 18:48:55.853845 [ 0.103063] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 18:48:55.865789 [ 0.103200] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 18:48:55.865851 [ 0.103210] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 18:48:55.865902 [ 0.103396] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 18:48:55.877803 [ 0.103614] pps_core: LinuxPPS API ver. 1 registered Oct 3 18:48:55.877864 [ 0.103619] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 18:48:55.889813 [ 0.103637] PTP clock support registered Oct 3 18:48:55.889871 [ 0.105144] NetLabel: Initializing Oct 3 18:48:55.901744 [ 0.105150] NetLabel: domain hash size = 128 Oct 3 18:48:55.901804 [ 0.105155] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 18:48:55.901853 [ 0.105209] NetLabel: unlabeled traffic allowed by default Oct 3 18:48:55.913796 [ 0.105382] vgaarb: loaded Oct 3 18:48:55.913853 [ 0.106295] clocksource: Switched to clocksource mct-frc Oct 3 18:48:55.925786 [ 0.106878] VFS: Disk quotas dquot_6.6.0 Oct 3 18:48:55.925845 [ 0.106964] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 18:48:55.925897 [ 0.107790] AppArmor: AppArmor Filesystem Enabled Oct 3 18:48:55.937795 [ 0.117711] NET: Registered PF_INET protocol family Oct 3 18:48:55.937856 [ 0.117942] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 18:48:55.949805 [ 0.119565] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 18:48:55.961792 [ 0.119668] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 18:48:55.961862 [ 0.119693] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 18:48:55.973805 [ 0.119794] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 18:48:55.973872 [ 0.120024] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 18:48:55.985842 [ 0.120253] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 18:48:55.997747 [ 0.120338] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 18:48:55.997775 [ 0.120378] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 18:48:56.009653 [ 0.120621] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 18:48:56.009678 [ 0.120656] NET: Registered PF_XDP protocol family Oct 3 18:48:56.021642 [ 0.120667] PCI: CLS 0 bytes, default 64 Oct 3 18:48:56.021672 [ 0.121156] Trying to unpack rootfs image as initramfs... Oct 3 18:48:56.021706 [ 0.121516] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 18:48:56.033649 [ 0.126894] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 18:48:56.045635 [ 0.194058] Initialise system trusted keyrings Oct 3 18:48:56.045666 [ 0.194135] Key type blacklist registered Oct 3 18:48:56.045693 [ 0.195381] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 18:48:56.057665 [ 0.203373] zbud: loaded Oct 3 18:48:56.057696 [ 0.204520] integrity: Platform Keyring initialized Oct 3 18:48:56.069642 [ 0.204553] integrity: Machine keyring initialized Oct 3 18:48:56.069676 [ 0.204563] Key type asymmetric registered Oct 3 18:48:56.069701 [ 0.204570] Asymmetric key parser 'x509' registered Oct 3 18:48:56.081642 [ 1.424236] Freeing initrd memory: 25132K Oct 3 18:48:56.081674 [ 1.446621] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 18:48:56.093643 [ 1.446889] bounce: pool size: 64 pages Oct 3 18:48:56.093675 [ 1.447081] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 18:48:56.093706 [ 1.447245] io scheduler mq-deadline registered Oct 3 18:48:56.105641 [ 1.452367] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 18:48:56.117637 [ 1.473350] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 18:48:56.117675 [ 1.473362] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 18:48:56.129662 [ 1.475686] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 18:48:56.141641 [ 1.475696] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 18:48:56.141680 [ 1.476506] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 18:48:56.153648 [ 1.476514] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 18:48:56.165645 [ 1.477330] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 18:48:56.165683 [ 1.477338] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 18:48:56.177649 [ 1.479702] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 18:48:56.189646 [ 1.482571] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 18:48:56.189680 [ 1.485294] Serial: AMBA driver Oct 3 18:48:56.201641 [ 1.485516] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 18:48:56.201680 [ 1.485988] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 18:48:56.213649 [ 1.486490] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 18:48:56.225644 [ 2.567238] printk: console [ttySAC2] enabled Oct 3 18:48:56.225676 [ 2.572045] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 18:48:56.237637 [ 2.582734] STM32 USART driver initialized Oct 3 18:48:56.237669 [ 2.597118] mousedev: PS/2 mouse device common for all mice Oct 3 18:48:56.261613 [ 2.628426] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 18:48:56.285629 [ 2.637052] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T18:48:56 UTC (1727981336) Oct 3 18:48:56.297666 [ 2.646900] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 18:48:56.309675 [ 2.654362] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 18:48:56.321547 [ 2.662367] NET: Registered PF_INET6 protocol family Oct 3 18:48:56.321571 [ 2.686265] Segment Routing with IPv6 Oct 3 18:48:56.345717 [ 2.688560] In-situ OAM (IOAM) with IPv6 Oct 3 18:48:56.345776 [ 2.692492] mip6: Mobile IPv6 Oct 3 18:48:56.357695 [ 2.695371] NET: Registered PF_PACKET protocol family Oct 3 18:48:56.357750 [ 2.700496] mpls_gso: MPLS GSO support Oct 3 18:48:56.357796 [ 2.704550] ThumbEE CPU extension supported. Oct 3 18:48:56.369747 [ 2.708364] Registering SWP/SWPB emulation handler Oct 3 18:48:56.369807 [ 2.713662] registered taskstats version 1 Oct 3 18:48:56.369854 [ 2.717263] Loading compiled-in X.509 certificates Oct 3 18:48:56.381692 [ 3.177750] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 18:48:56.840859 [ 3.185096] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 18:48:56.852840 [ 3.196177] zswap: loaded using pool lzo/zbud Oct 3 18:48:56.852840 [ 3.200090] Key type .fscrypt registered Oct 3 18:48:56.864841 [ 3.203427] Key type fscrypt-provisioning registered Oct 3 18:48:56.864841 [ 3.227848] Key type encrypted registered Oct 3 18:48:56.888869 [ 3.230439] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 18:48:56.888869 [ 3.235929] ima: No TPM chip found, activating TPM-bypass! Oct 3 18:48:56.900903 [ 3.241371] ima: Allocated hash algorithm: sha256 Oct 3 18:48:56.900903 [ 3.246060] ima: No architecture policies found Oct 3 18:48:56.912875 [ 3.250615] evm: Initialising EVM extended attributes: Oct 3 18:48:56.912875 [ 3.255662] evm: security.selinux Oct 3 18:48:56.912875 [ 3.258962] evm: security.SMACK64 (disabled) Oct 3 18:48:56.924892 [ 3.263207] evm: security.SMACK64EXEC (disabled) Oct 3 18:48:56.924892 [ 3.267810] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 18:48:56.924892 [ 3.272845] evm: security.SMACK64MMAP (disabled) Oct 3 18:48:56.936874 [ 3.277444] evm: security.apparmor Oct 3 18:48:56.936874 [ 3.280827] evm: security.ima Oct 3 18:48:56.936874 [ 3.283779] evm: security.capability Oct 3 18:48:56.948797 [ 3.287344] evm: HMAC attrs: 0x1 Oct 3 18:48:56.948797 [ 3.875331] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 18:48:57.541023 [ 3.881287] clk: Disabling unused clocks Oct 3 18:48:57.541107 [ 3.894173] Freeing unused kernel image (initmem) memory: 2048K Oct 3 18:48:57.552938 [ 3.899057] Checked W+X mappings: passed, no W+X pages found Oct 3 18:48:57.564913 [ 3.904297] Run /init as init process Oct 3 18:48:57.564913 Loading, please wait... Oct 3 18:48:57.588902 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 18:48:57.672825 [ 4.822602] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 18:48:58.489129 [ 4.836653] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 18:48:58.501008 [ 4.865968] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 18:48:58.525021 [ 4.888494] usbcore: registered new interface driver usbfs Oct 3 18:48:58.549071 [ 4.910038] Synopsys Designware Multimedia Card Interface Driver Oct 3 18:48:58.572975 [ 4.931428] usbcore: registered new interface driver hub Oct 3 18:48:58.597161 [ 4.941172] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 18:48:58.609011 [ 4.950943] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 18:48:58.609078 [ 4.956518] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 18:48:58.621304 [ 4.962851] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 18:48:58.621365 [ 4.968270] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 18:48:58.633271 [ 4.974630] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 18:48:58.633335 [ 4.984600] usbcore: registered new device driver usb Oct 3 18:48:58.645157 [ 4.986462] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo Oct 3 18:48:58.657082 [ 5.013699] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 18:48:58.668986 [ 5.030475] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo Oct 3 18:48:58.693208 [ 5.050989] mmc_host mmc0: card is polling. Oct 3 18:48:58.705179 [ 5.055417] SCSI subsystem initialized Oct 3 18:48:58.716980 [ 5.066600] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 18:48:58.729068 [ 5.066926] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 18:48:58.740989 [ 5.148202] phy phy-12130000.phy.1: phy_power_on was called before phy_init Oct 3 18:48:58.812822 [ 5.154581] phy phy-12130000.phy.1: phy_power_on was called before phy_init Oct 3 18:48:58.812911 [ 5.165086] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 18:48:58.824872 [ 5.169571] exynos-ohci 12120000.usb: USB Host Controller Oct 3 18:48:58.836936 [ 5.175906] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Oct 3 18:48:58.837017 [ 5.192556] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Oct 3 18:48:58.860872 [ 5.193025] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 18:48:58.860872 [ 5.207022] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 18:48:58.872817 [ 5.222627] exynos-ohci 12120000.usb: irq 109, io mem 0x12120000 Oct 3 18:48:58.884836 [ 5.223218] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 18:48:58.896841 [ 5.231499] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 18:48:58.896928 [ 5.246779] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 18:48:58.908845 [ 5.249717] mmc0: new DDR MMC card at address 0001 Oct 3 18:48:58.908930 [ 5.252426] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Oct 3 18:48:58.921004 [ 5.266015] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 18:48:58.932915 [ 5.290785] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 18:48:58.956821 [ 5.297662] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 18:48:58.956902 [ 5.297664] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 18:48:58.968868 [ 5.314566] usb usb1: Product: USB Host Controller Oct 3 18:48:58.980838 [ 5.314633] mmc1: new high speed SDHC card at address aaaa Oct 3 18:48:58.980838 [ 5.319314] usb usb1: Manufacturer: Linux 6.1.0-25-armmp-lpae ohci_hcd Oct 3 18:48:58.992874 [ 5.319322] usb usb1: SerialNumber: 12120000.usb Oct 3 18:48:58.992874 [ 5.337220] exynos-ehci 12110000.usb: irq 109, io mem 0x12110000 Oct 3 18:48:58.992874 [ 5.337793] hub 1-0:1.0: USB hub found Oct 3 18:48:59.004967 [ 5.348735] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Oct 3 18:48:59.004967 [ 5.361980] mmcblk0: p1 p2 p3 p4 Oct 3 18:48:59.016917 [ 5.365192] hub 1-0:1.0: 3 ports detected Oct 3 18:48:59.028879 [ 5.366329] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Oct 3 18:48:59.028879 [ 5.372941] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 18:48:59.040882 [ 5.379240] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 18:48:59.040882 [ 5.387052] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 18:48:59.052855 [ 5.394237] usb usb2: Product: EHCI Host Controller Oct 3 18:48:59.052855 [ 5.399092] usb usb2: Manufacturer: Linux 6.1.0-25-armmp-lpae ehci_hcd Oct 3 18:48:59.064896 [ 5.399779] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Oct 3 18:48:59.064896 [ 5.405593] usb usb2: SerialNumber: 12110000.usb Oct 3 18:48:59.076866 [ 5.415975] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Oct 3 18:48:59.076866 [ 5.417612] scsi host0: ahci-dwc Oct 3 18:48:59.076866 [ 5.420241] hub 2-0:1.0: USB hub found Oct 3 18:48:59.088818 [ 5.429457] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 110 Oct 3 18:48:59.088901 [ 5.435579] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (241:0) Oct 3 18:48:59.100813 [ 5.438691] hub 2-0:1.0: 3 ports detected Oct 3 18:48:59.100813 [ 5.696608] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 18:48:59.364782 [ 5.770788] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 18:48:59.436793 [ 5.879229] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 18:48:59.544903 [ 5.922365] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 18:48:59.580843 [ 5.927991] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 18:48:59.592860 [ 5.933787] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 18:48:59.592860 [ 5.941286] ata1.00: configured for UDMA/133 Oct 3 18:48:59.604859 [ 5.945176] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 18:48:59.604859 [ 5.987183] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 18:48:59.652820 [ 6.012128] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 18:48:59.676854 [ 6.016183] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 18:48:59.676854 [ 6.024436] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 18:48:59.688851 [ 6.033587] xhci-hcd xhci-hcd.2.auto: irq 111, io mem 0x12000000 Oct 3 18:48:59.700856 [ 6.039390] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 18:48:59.700856 [ 6.044638] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 18:48:59.712876 [ 6.052281] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 18:48:59.712876 [ 6.058956] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 18:48:59.724880 [ 6.067031] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 18:48:59.736876 [ 6.074232] usb usb3: Product: xHCI Host Controller Oct 3 18:48:59.736876 [ 6.079086] usb usb3: Manufacturer: Linux 6.1.0-25-armmp-lpae xhci-hcd Oct 3 18:48:59.736876 [ 6.085595] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 18:48:59.748872 [ 6.091033] hub 3-0:1.0: USB hub found Oct 3 18:48:59.748872 [ 6.094205] hub 3-0:1.0: 1 port detected Oct 3 18:48:59.760888 [ 6.095172] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 18:48:59.760888 [ 6.098858] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 18:48:59.772875 [ 6.115618] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 18:48:59.785002 [ 6.123734] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 18:48:59.785071 [ 6.130913] usb usb4: Product: xHCI Host Controller Oct 3 18:48:59.796989 [ 6.135782] usb usb4: Manufacturer: Linux 6.1.0-25-armmp-lpae xhci-hcd Oct 3 18:48:59.797054 [ 6.142304] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 18:48:59.808966 [ 6.149203] hub 4-0:1.0: USB hub found Oct 3 18:48:59.809025 [ 6.151574] hub 4-0:1.0: 1 port detected Oct 3 18:48:59.809070 [ 6.195413] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 18:48:59.864899 [ 6.201467] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 18:48:59.864899 [ 6.210244] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 18:48:59.876880 [ 6.218177] sd 0:0:0:0: [sda] Write Protect is off Oct 3 18:48:59.876880 [ 6.222991] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 18:48:59.888874 [ 6.232784] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 18:48:59.900802 [ 6.259772] sda: sda1 sda2 < sda5 > Oct 3 18:48:59.912821 [ 6.264975] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 18:48:59.924829 [ 6.318217] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 18:48:59.984982 [ 6.426185] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 18:49:00.092891 [ 6.534157] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 18:49:00.200835 [ 6.642130] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 18:49:00.309005 [ 7.050643] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 18:49:00.713720 [ 7.158248] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 18:49:00.821743 [ 7.266320] random: crng init done Oct 3 18:49:00.929685 [ 7.380918] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. Oct 3 18:49:01.049728 [ 7.391832] device-mapper: uevent: version 1.0.3 Oct 3 18:49:01.049790 [ 7.396511] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Oct 3 18:49:01.061729 [ 7.766346] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 18:49:01.433698 Begin: Loading essential drivers ... done. Oct 3 18:49:01.745657 Begin: Running /scripts/init-premount ... done. Oct 3 18:49:04.769713 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 18:49:04.769799 Begin: Running /scripts/local-premount ... done. Oct 3 18:49:04.865665 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 18:49:04.916823 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 18:49:05.012799 /dev/mapper/arndale--westfield--vg-root: clean, 39343/1220608 files, 378259/4882432 blocks Oct 3 18:49:05.220828 done. Oct 3 18:49:05.232787 [ 11.703810] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 18:49:05.365076 [ 11.899317] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 18:49:05.556825 done. Oct 3 18:49:05.568804 Begin: Running /scripts/local-bottom ... done. Oct 3 18:49:05.604931 Begin: Running /scripts/init-bottom ... done. Oct 3 18:49:05.640763 [ 12.222645] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. Oct 3 18:49:05.880848 INIT: version 3.06 booting Oct 3 18:49:06.192785 INIT: No inittab.d directory found Oct 3 18:49:06.304749 Using makefile-style concurrent boot in runlevel S. Oct 3 18:49:06.632797 Starting hotplug events dispatcher: systemd-udevd. Oct 3 18:49:08.256833 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 18:49:08.520862 Synthesizing the initial hotplug events (devices)...done. Oct 3 18:49:09.048852 Waiting for /dev to be fully populated...[ 15.571689] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Oct 3 18:49:09.240808 [ 15.620540] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 18:49:09.276852 [ 15.759665] sd 0:0:0:0: Attached scsi generic sg0 type 0 Oct 3 18:49:09.420870 [ 15.901874] panfrost 11800000.gpu: clock rate = 533000000 Oct 3 18:49:09.564739 [ 15.918345] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 18:49:09.588880 [ 15.929395] panfrost 11800000.gpu: mali-t600 id 0x600 major 0x0 minor 0x0 status 0x1 Oct 3 18:49:09.588880 [ 15.935716] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,31b4dfff Oct 3 18:49:09.600883 [ 15.943840] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 Oct 3 18:49:09.612878 [ 15.955571] panfrost 11800000.gpu: shader_present=0xf l2_present=0x1 Oct 3 18:49:09.612878 [ 15.990173] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 18:49:09.660790 [ 16.027256] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 0 Oct 3 18:49:09.684851 [ 16.033302] usb3503 usb-hub: switched to HUB mode Oct 3 18:49:09.696816 [ 16.038001] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 18:49:09.696816 [ 16.098657] blk_print_req_error: 6 callbacks suppressed Oct 3 18:49:09.756823 [ 16.098667] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 18:49:09.768851 [ 16.211915] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 18:49:09.880817 [ 16.320170] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 18:49:09.988809 [ 16.354420] usb 2-3: new high-speed USB device number 2 using exynos-ehci Oct 3 18:49:10.012812 [ 16.413089] OF: graph: no port node found in /soc/hdmi@14530000 Oct 3 18:49:10.072852 [ 16.428380] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 18:49:10.096805 [ 16.514951] usb 2-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Oct 3 18:49:10.180879 [ 16.521759] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 3 18:49:10.180879 [ 16.535126] hub 2-3:1.0: USB hub found Oct 3 18:49:10.192858 [ 16.537529] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 18:49:10.204865 [ 16.547177] hub 2-3:1.0: 3 ports detected Oct 3 18:49:10.204865 [ 16.647047] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 18:49:10.311992 [ 16.755370] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 18:49:10.420848 [ 16.842424] usb 2-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 18:49:10.504847 [ 16.863645] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 18:49:10.528846 [ 16.967556] usb 2-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=77.32 Oct 3 18:49:10.636951 [ 16.974597] usb 2-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Oct 3 18:49:10.637016 [ 16.981902] usb 2-3.2: Product: USB2.0 Hub Oct 3 18:49:10.637043 [ 16.989940] hub 2-3.2:1.0: USB hub found Oct 3 18:49:10.648859 [ 16.992929] hub 2-3.2:1.0: 4 ports detected Oct 3 18:49:10.648859 [ 17.286809] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 18:49:10.948885 [ 17.294720] usb 2-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 18:49:10.960833 [ 17.394837] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 18:49:11.057062 [ 17.413023] usb 2-3.2.4: New USB device found, idVendor=0b95, idProduct=772a, bcdDevice= 0.01 Oct 3 18:49:11.080868 [ 17.420371] usb 2-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Oct 3 18:49:11.081041 [ 17.427724] usb 2-3.2.4: Product: AX88772 Oct 3 18:49:11.092884 [ 17.431790] usb 2-3.2.4: Manufacturer: ASIX Elec. Corp. Oct 3 18:49:11.092884 [ 17.437064] usb 2-3.2.4: SerialNumber: 000001 Oct 3 18:49:11.092884 [ 17.971682] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 18:49:11.632865 [ 18.004664] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 18:49:11.668839 [ 18.644982] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 18:49:12.314967 [ 18.660523] Asix Electronics AX88772A usb-002:004:10: attached PHY driver (mii_bus:phy_addr=usb-002:004:10, irq=POLL) Oct 3 18:49:12.328896 [ 18.672304] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, aa:7d:71:70:25:f5 Oct 3 18:49:12.340822 [ 18.690674] usbcore: registered new interface driver asix Oct 3 18:49:12.352842 done. Oct 3 18:49:12.628800 [ 19.425706] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 18:49:13.084962 Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). Oct 3 18:49:13.132806 Checking file systems.../dev/sda1: clean, 922/61056 files, 25402/243968 blocks Oct 3 18:49:14.368839 done. Oct 3 18:49:14.404815 Cleaning up temporary files... /tmp. Oct 3 18:49:14.656815 [ 21.161242] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 18:49:14.824833 [ 21.210006] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 18:49:14.872851 [ 21.462008] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k FS Oct 3 18:49:15.124868 Mounting local filesystems...done. Oct 3 18:49:16.048881 Activating swapfile swap, if any...done. Oct 3 18:49:16.049022 Cleaning up temporary files.... Oct 3 18:49:16.084822 Starting Setting kernel variables: sysctl. Oct 3 18:49:16.240955 [ 23.132515] audit: type=1400 audit(1727981356.856:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=875 comm="apparmor_parser" Oct 3 18:49:16.809013 [ 23.154945] audit: type=1400 audit(1727981356.872:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=875 comm="apparmor_parser" Oct 3 18:49:16.820979 [ 23.169371] audit: type=1400 audit(1727981356.880:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=874 comm="apparmor_parser" Oct 3 18:49:16.844800 [ 23.569796] audit: type=1400 audit(1727981357.292:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=902 comm="apparmor_parser" Oct 3 18:49:17.240878 [ 23.586406] audit: type=1400 audit(1727981357.292:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=902 comm="apparmor_parser" Oct 3 18:49:17.252891 [ 23.599909] audit: type=1400 audit(1727981357.292:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=902 comm="apparmor_parser" Oct 3 18:49:17.276944 [ 23.754514] asix 2-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 18:49:17.421005 [ 23.903507] audit: type=1400 audit(1727981357.628:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=900 comm="apparmor_parser" Oct 3 18:49:17.577048 [ 23.922488] audit: type=1400 audit(1727981357.632:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=900 comm="apparmor_parser" Oct 3 18:49:17.600877 [ 23.938347] audit: type=1400 audit(1727981357.636:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=900 comm="apparmor_parser" Oct 3 18:49:17.612898 [ 23.955877] audit: type=1400 audit(1727981357.640:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=900 comm="apparmor_parser" Oct 3 18:49:17.624848 Starting: AppArmorLoading AppArmor profiles...done. Oct 3 18:49:17.660838 . Oct 3 18:49:17.660838 [ 25.927933] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 18:49:19.585050 [ 25.934118] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 3 18:49:19.596975 Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1 Oct 3 18:49:20.788829 Copyright 2004-2022 Internet Systems Consortium. Oct 3 18:49:20.800883 All rights reserved. Oct 3 18:49:20.800883 For info, please visit https://www.isc.org/software/dhcp/ Oct 3 18:49:20.800883 Oct 3 18:49:20.800883 Listening on LPF/eth0/a6:46:13:77:e8:2f Oct 3 18:49:20.812872 Sending on LPF/eth0/a6:46:13:77:e8:2f Oct 3 18:49:20.812872 Sending on Socket/fallback Oct 3 18:49:20.812872 Created duid "\000\001\000\001.\221\243\255\246F\023w\350/". Oct 3 18:49:20.824845 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 Oct 3 18:49:20.824845 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 Oct 3 18:49:21.344884 DHCPOFFER of 10.149.64.45 from 10.149.64.4 Oct 3 18:49:21.344884 DHCPREQUEST for 10.149.64.45 on eth0 to 255.255.255.255 port 67 Oct 3 18:49:21.356852 DHCPACK of 10.149.64.45 from 10.149.64.4 Oct 3 18:49:21.356852 bound to 10.149.64.45 -- renewal in 289 seconds. Oct 3 18:49:21.356852 done. Oct 3 18:49:21.356852 Cleaning up temporary files.... Oct 3 18:49:21.404791 Starting nftables: none Oct 3 18:49:21.464810 . Oct 3 18:49:21.885664 INIT: Entering runlevel: 2 Oct 3 18:49:21.945751 Using makefile-style concurrent boot in runlevel 2. Oct 3 18:49:21.993660 Starting Apache httpd web server: apache2[ 28.896764] exynos4-fb 14400000.fimd: deferred probe timeout, ignoring dependency Oct 3 18:49:22.557784 [ 28.906572] exynos-mixer 14450000.mixer: deferred probe timeout, ignoring dependency Oct 3 18:49:22.569822 [ 28.914101] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations Oct 3 18:49:22.581778 [ 28.920623] exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm]) Oct 3 18:49:22.581874 [ 28.928967] exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm]) Oct 3 18:49:22.593746 [ 28.945461] exynos-drm exynos-drm: bound 14500000.dsi (ops hdmi_enable [exynosdrm]) Oct 3 18:49:22.605783 [ 28.960199] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm]) Oct 3 18:49:22.619165 [ 28.976120] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 18:49:22.641735 [ 28.981365] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 18:49:22.641805 [ 28.990755] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 Oct 3 18:49:22.653688 . Oct 3 18:49:24.165691 Starting NTP server: ntpd2024-10-03T18:49:24 ntpd[1136]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 18:49:24.525811 2024-10-03T18:49:24 ntpd[1136]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 18:49:24.525900 . Oct 3 18:49:24.525939 Starting periodic command scheduler: cron. Oct 3 18:49:24.729720 Starting system message bus: dbus. Oct 3 18:49:24.957697 Starting OpenBSD Secure Shell server: sshd. Oct 3 18:49:25.425776 Oct 3 18:49:26.529892 Debian GNU/Linux 12 arndale-westfield ttySAC2 Oct 3 18:49:26.529892 Oct 3 18:49:26.529892 arndale-westfield login: INIT: Switching to r INIT: No inittab.d directorUsing makefile-style concurrent boot in runlevel 6. Oct 3 18:54:52.097706 Stopping libvirt management daemon: libvirtdNo /usr/local/sbin/libvirtd found running; none killed. Oct 3 18:54:52.157701 . Oct 3 18:54:52.157774 Stopping SMP IRQ Balancer: irqbalance. Oct 3 18:54:52.169669 Stopping hotplug events dispatcher: systemd-udevd. Oct 3 18:54:52.181679 Stopping nftables: none. Oct 3 18:54:52.193697 Saving the system clock to /dev/rtc0. Oct 3 18:54:53.093735 Hardware Clock updated to Thu Oct 3 18:54:53 UTC 2024. Oct 3 18:54:53.093797 Stopping Apache httpd web server: apache2. Oct 3 18:54:53.321704 Asking all remaining processes to terminate...done. Oct 3 18:54:53.645731 All processes ended within 1 seconds...done. Oct 3 18:54:53.645790 Deconfiguring network interfaces...ifdown: ignoring unknown interface eth0=eth0 Oct 3 18:54:53.765661 done. Oct 3 18:54:53.765715 [ 360.314157] EXT4-fs (sda1): unmounting filesystem. Oct 3 18:54:53.969733 Deactivating swap...done. Oct 3 18:54:54.041594 Unmounting local filesystems...done. Oct 3 18:54:54.041627 [ 360.697709] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 18:54:54.353614 Will now restart. Oct 3 18:54:54.677582 [ 361.045626] asix 2-3.2.4:1.0 eth0: Link is Down Oct 3 18:54:54.701608 [ 361.113326] sd 0:0:0:0: [sda] Synchronizing SCSI cache Oct 3 18:54:54.773631 [ 361.121130] wake enabled for irq 101 (gpx1-4) Oct 3 18:54:54.773664 [ 361.124043] wake enabled for irq 102 (gpx1-5) Oct 3 18:54:54.785644 [ 361.128370] wake enabled for irq 103 (gpx1-6) Oct 3 18:54:54.785678 [ 361.132709] wake enabled for irq 104 (gpx1-7) Oct 3 18:54:54.785704 [ 361.137048] wake enabled for irq 105 (gpx2-0) Oct 3 18:54:54.797631 [ 361.141387] wake enabled for irq 106 (gpx2-1) Oct 3 18:54:54.797665 [ 361.146244] reboot: Reű Oct 3 18:54:55.133705 Oct 3 18:54:55.133759 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 18:54:55.145745 Oct 3 18:54:55.145798 CPU: Exynos5250@1000MHz Oct 3 18:54:55.145841 Oct 3 18:54:55.145879 Board: Arndale Oct 3 18:54:55.145919 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 18:54:55.145965 ready Oct 3 18:54:55.146002 DRAM: 2 GiB Oct 3 18:54:55.157678 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 18:54:55.169727 trace: enabled Oct 3 18:54:55.205676 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 18:54:55.565700 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 18:54:55.625759 In: serial Oct 3 18:54:55.625812 Out: serial Oct 3 18:54:55.625853 Err: serial Oct 3 18:54:55.625892 SCSI: ARNDALE SCSI INIT Oct 3 18:54:55.625934 Target spinup took 0 ms. Oct 3 18:54:55.637719 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 18:54:55.637781 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 18:54:55.649753 Net: Net Initialization Skipped Oct 3 18:54:55.649811 No ethernet found. Oct 3 18:54:55.649852 Hostname: arndale-westfield Oct 3 18:54:55.649895 Hit any key to stop autoboot: 2  1  0 Oct 3 18:54:57.573648 (Re)start USB... Oct 3 18:54:57.573714 USB0: USB EHCI 1.00 Oct 3 18:54:57.585581 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 18:55:03.177690 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 18:55:03.189767 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 18:55:03.633686 Waiting for Ethernet connection... done. Oct 3 18:55:05.277607 BOOTP broadcast 1 Oct 3 18:55:05.277607 BOOTP broadcast 2 Oct 3 18:55:06.900948 DHCP client bound to address 10.149.64.45 (1686 ms) Oct 3 18:55:06.901034 Using asx0 device Oct 3 18:55:06.901077 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 18:55:06.912847 Filename 'pxelinux.0'. Oct 3 18:55:06.912904 Load address: 0x43e00000 Oct 3 18:55:06.912947 Loading: *### Oct 3 18:55:06.924795 2.5 MiB/s Oct 3 18:55:06.924850 done Oct 3 18:55:06.924890 Bytes transferred = 42430 (a5be hex) Oct 3 18:55:06.936890 missing environment variable: pxeuuid Oct 3 18:55:06.936949 Retrieving file: pxelinux.cfg/0A95402D Oct 3 18:55:06.936995 Using asx0 device Oct 3 18:55:06.937036 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 18:55:06.948885 Filename 'pxelinux.cfg/0A95402D'. Oct 3 18:55:06.948944 Load address: 0x51000000 Oct 3 18:55:06.948987 Loading: *# Oct 3 18:55:06.949027 31.3 KiB/s Oct 3 18:55:06.949067 done Oct 3 18:55:06.960879 Bytes transferred = 65 (41 hex) Oct 3 18:55:06.960938 Config file found Oct 3 18:55:06.960980 Ignoring unknown command: serial Oct 3 18:55:06.961024 1: local Oct 3 18:55:06.961063 scanning bus for devices... Oct 3 18:55:06.961105 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 18:55:06.988866 Type: Hard Disk Oct 3 18:55:06.988923 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 18:55:06.988972 Found 1 device(s). Oct 3 18:55:06.989014 Oct 3 18:55:06.989051 SCSI device 0: Oct 3 18:55:07.000804 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 18:55:07.000839 Type: Hard Disk Oct 3 18:55:07.000863 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 18:55:07.012870 ... is now current device Oct 3 18:55:07.012928 Scanning scsi 0... Oct 3 18:55:07.012970 Found U-Boot script /boot.scr Oct 3 18:55:07.192845 1742 bytes read in 41 ms (41 KiB/s) Oct 3 18:55:07.240981 ## Executing script at 50000000 Oct 3 18:55:07.241038 Loading dtbs/6.1.112+/exynos5250-arndale.dtb Oct 3 18:55:07.241085 46686 bytes read in 3156 ms (13.7 KiB/s) Oct 3 18:55:10.304645 1015824 bytes read in 119 ms (8.1 MiB/s) Oct 3 18:55:10.436703 Loaded xen-4.20-unstable to 0x41000000 (f8010) Oct 3 18:55:10.448727 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan Oct 3 18:55:10.448727 10039808 bytes read in 498 ms (19.2 MiB/s) Oct 3 18:55:10.960706 Loaded vmlinuz-6.1.112+ to 0x42000000 (993200) Oct 3 18:55:10.960706 command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 18:55:10.984693 12059080 bytes read in 757 ms (15.2 MiB/s) Oct 3 18:55:11.732843 Loaded initrd.img-6.1.112+ to 0x43300000 (b801c8) Oct 3 18:55:11.732843 chosen { Oct 3 18:55:11.744860 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan"; Oct 3 18:55:11.744860 #size-cells = <0x00000001>; Oct 3 18:55:11.756881 #address-cells = <0x00000001>; Oct 3 18:55:11.756881 stdout-path = "serial2:115200n8"; Oct 3 18:55:11.756881 module@1 { Oct 3 18:55:11.756881 reg = <0x43300000 0x00b801c8>; Oct 3 18:55:11.756881 compatible = "xen,linux-initrd", "xen,multiboot-module"; Oct 3 18:55:11.768836 }; Oct 3 18:55:11.768836 module@0 { Oct 3 18:55:11.768836 bootargs = "ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Oct 3 18:55:11.780869 reg = <0x42000000 0x00993200>; Oct 3 18:55:11.792882 compatible = "xen,linux-zimage", "xen,multiboot-module"; Oct 3 18:55:11.792882 }; Oct 3 18:55:11.792882 }; Oct 3 18:55:11.792882 Booting 0x41000000 - 0x43000000 Oct 3 18:55:11.792882 Kernel image @ 0x41000000 [ 0x000000 - 0x135000 ] Oct 3 18:55:11.804859 ## Flattened Device Tree blob at 43000000 Oct 3 18:55:11.804859 Booting using the fdt blob at 0x43000000 Oct 3 18:55:11.804859 reserving fdt memory region: addr=43000000 size=c000 Oct 3 18:55:11.816883 Loading Device Tree to 4fff1000, end 4fffffff ... OK Oct 3 18:55:11.816883 Oct 3 18:55:11.828826 Starting kernel ...(fake run for tracing) Oct 3 18:55:11.828826 Oct 3 18:55:11.828826 Oct 3 18:55:11.828826 Starting kernel ... Oct 3 18:55:11.828826 Oct 3 18:55:11.828826 __ __ _ _ ____ ___ _ _ _ Oct 3 18:55:11.876854 \ \/ /___ _ __ | || | |___ \ / _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Oct 3 18:55:11.888915 \ // _ \ '_ \ | || |_ __) | | | |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Oct 3 18:55:11.900877 / \ __/ | | | |__ _| / __/| |_| |__| |_| | | | \__ \ || (_| | |_) | | __/ Oct 3 18:55:11.900877 /_/\_\___|_| |_| |_|(_)_____|\___/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Oct 3 18:55:11.912884 Oct 3 18:55:11.912884 (XEN) Xen version 4.20-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Thu Oct 3 15:21:50 UTC 2024 Oct 3 18:55:11.924844 (XEN) Latest ChangeSet: Wed Oct 2 08:59:03 2024 +0200 git:b102c9f1ce Oct 3 18:55:11.924844 (XEN) build-id: 51582c216da8646d6c60fa2305b80721a649af73 Oct 3 18:55:11.937060 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Oct 3 18:55:11.937145 (XEN) 32-bit Execution: Oct 3 18:55:11.937188 (XEN) Processor Features: 00001031:00011011 Oct 3 18:55:11.948888 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Oct 3 18:55:11.948888 (XEN) Extensions: GenericTimer Security Oct 3 18:55:11.960906 (XEN) Debug Features: 02010555 Oct 3 18:55:11.960906 (XEN) Auxiliary Features: 00000000 Oct 3 18:55:11.960906 (XEN) Memory Model Features: 10201105 20000000 Oct 3 18:55:11.960906 (XEN) 01240000 02102211 Oct 3 18:55:11.972816 (XEN) ISA Features: 02101110 13112111 21232041 Oct 3 18:55:11.972816 (XEN) 11112131 10011142 00000000 Oct 3 18:55:11.984852 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Oct 3 18:55:11.984852 (XEN) Set SYSRAM to 0000000041000070 (00200070) Oct 3 18:55:11.997064 (XEN) SMP: Allowing 2 CPUs Oct 3 18:55:11.997135 (XEN) enabled workaround for: ARM erratum 766422 Oct 3 18:55:11.997267 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Oct 3 18:55:12.005722 (XEN) GICv2 initialization: Oct 3 18:55:12.005773 (XEN) gic_dist_addr=0000000010481000 Oct 3 18:55:12.017700 (XEN) gic_cpu_addr=0000000010482000 Oct 3 18:55:12.017752 (XEN) gic_hyp_addr=0000000010484000 Oct 3 18:55:12.017797 (XEN) gic_vcpu_addr=0000000010486000 Oct 3 18:55:12.029754 (XEN) gic_maintenance_irq=25 Oct 3 18:55:12.029813 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Oct 3 18:55:12.029863 (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2) Oct 3 18:55:12.041742 (XEN) Initializing Credit2 scheduler Oct 3 18:55:12.041799 (XEN) load_precision_shift: 18 Oct 3 18:55:12.041844 (XEN) load_window_shift: 30 Oct 3 18:55:12.041887 (XEN) underload_balance_tolerance: 0 Oct 3 18:55:12.053756 (XEN) overload_balance_tolerance: -3 Oct 3 18:55:12.053814 (XEN) runqueues arrangement: socket Oct 3 18:55:12.053860 (XEN) cap enforcement granularity: 10ms Oct 3 18:55:12.065744 (XEN) load tracking window length 1073741824 ns Oct 3 18:55:12.065804 (XEN) Allocated console ring of 16 KiB. Oct 3 18:55:12.065850 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Oct 3 18:55:12.077720 (XEN) CPU0: Guest atomics will try 2 times before pausing the domain Oct 3 18:55:12.077784 (XEN) Bringing up CPU1 Oct 3 18:55:12.077828 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Oct 3 18:55:12.089768 (XEN) Brought up 2 CPUs Oct 3 18:55:12.089824 (XEN) CPU 1 booted. Oct 3 18:55:12.089866 (XEN) I/O virtualisation disabled Oct 3 18:55:12.101756 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Oct 3 18:55:12.101817 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Oct 3 18:55:12.101866 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Oct 3 18:55:12.113742 (XEN) Initializing Credit2 scheduler Oct 3 18:55:12.113800 (XEN) load_precision_shift: 18 Oct 3 18:55:12.113844 (XEN) load_window_shift: 30 Oct 3 18:55:12.125752 (XEN) underload_balance_tolerance: 0 Oct 3 18:55:12.125811 (XEN) overload_balance_tolerance: -3 Oct 3 18:55:12.125856 (XEN) runqueues arrangement: socket Oct 3 18:55:12.125900 (XEN) cap enforcement granularity: 10ms Oct 3 18:55:12.137819 (XEN) load tracking window length 1073741824 ns Oct 3 18:55:12.137878 (XEN) Adding cpu 0 to runqueue 0 Oct 3 18:55:12.137922 (XEN) First cpu on runqueue, activating Oct 3 18:55:12.149816 (XEN) Adding cpu 1 to runqueue 0 Oct 3 18:55:12.149873 (XEN) alternatives: Patching with alt table 002c31f0 -> 002c32c8 Oct 3 18:55:12.149923 (XEN) CPU0 will execute ICIALLU on guest exit Oct 3 18:55:12.161791 (XEN) CPU1 will execute ICIALLU on guest exit Oct 3 18:55:12.161850 (XEN) *** LOADING DOMAIN 0 *** Oct 3 18:55:12.161894 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Oct 3 18:55:12.173795 (XEN) Loading ramdisk from boot module @ 0000000043300000 Oct 3 18:55:12.173848 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Oct 3 18:55:12.185680 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Oct 3 18:55:12.737781 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Oct 3 18:55:12.737847 (XEN) Allocating PPI 16 for event channel interrupt Oct 3 18:55:12.773666 (XEN) d0: extended regions not supported for 32-bit guests Oct 3 18:55:12.785665 (XEN) Loading zImage from 0000000042000000 to 0000000067600000-0000000067f93200 Oct 3 18:55:12.785724 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d801c8 Oct 3 18:55:12.881670 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b4c2 Oct 3 18:55:12.977757 (XEN) Initial low memory virq threshold set at 0x4000 pages. Oct 3 18:55:12.977819 (XEN) Scrubbing Free RAM in background Oct 3 18:55:12.989761 (XEN) Std. Loglevel: All Oct 3 18:55:12.989817 (XEN) Guest Loglevel: All Oct 3 18:55:12.989860 (XEN) *************************************************** Oct 3 18:55:12.989936 (XEN) WARNING: SILO mode is not enabled. Oct 3 18:55:13.001723 (XEN) It has implications on the security of the system, Oct 3 18:55:13.001785 (XEN) unless the communications have been forbidden between Oct 3 18:55:13.013716 (XEN) untrusted domains. Oct 3 18:55:13.013772 (XEN) *************************************************** Oct 3 18:55:13.013819 (XEN) 3... 2... 1... Oct 3 18:55:16.021061 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 18:55:16.021144 (XEN) Freed 384kB init memory. Oct 3 18:55:16.021188 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 18:55:17.089076 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Oct 3 18:55:17.101016 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Oct 3 18:55:17.113070 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Oct 3 18:55:17.113133 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Oct 3 18:55:17.125015 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 18:55:17.125078 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 18:55:17.173004 [ 0.000000] Linux version 6.1.112+ (osstest@himrod1) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Thu Oct 3 12:43:01 UTC 2024 Oct 3 18:55:17.185004 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 18:55:17.197113 [ 0.000000] CPU: div instructions available: patching division code Oct 3 18:55:17.197192 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 18:55:17.209036 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 18:55:17.220968 [ 0.000000] Memory policy: Data cache writealloc Oct 3 18:55:17.221025 [ 0.000000] Xen 4.20 support found Oct 3 18:55:17.221073 [ 0.000000] efi: UEFI not found. Oct 3 18:55:17.221144 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 Oct 3 18:55:17.232959 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 18:55:17.233013 [ 0.000000] Zone ranges: Oct 3 18:55:17.233057 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Oct 3 18:55:17.245019 [ 0.000000] Normal empty Oct 3 18:55:17.245071 [ 0.000000] HighMem empty Oct 3 18:55:17.245115 [ 0.000000] Movable zone start for each node Oct 3 18:55:17.256997 [ 0.000000] Early memory node ranges Oct 3 18:55:17.257049 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Oct 3 18:55:17.269019 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Oct 3 18:55:17.269078 [ 0.000000] psci: probing for conduit method from DT. Oct 3 18:55:17.281014 [ 0.000000] psci: PSCIv1.1 detected in firmware. Oct 3 18:55:17.281069 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Oct 3 18:55:17.281119 [ 0.000000] psci: Trusted OS migration not required Oct 3 18:55:17.293000 [ 0.000000] psci: SMC Calling Convention v1.2 Oct 3 18:55:17.293053 [ 0.000000] percpu: Embedded 16 pages/cpu s35412 r8192 d21932 u65536 Oct 3 18:55:17.304940 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 Oct 3 18:55:17.304977 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 18:55:17.329024 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 18:55:17.329087 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Oct 3 18:55:17.341018 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Oct 3 18:55:17.352964 [ 0.000000] Memory: 416844K/524288K available (14336K kernel code, 2180K rwdata, 5604K rodata, 2048K init, 438K bss, 41908K reserved, 65536K cma-reserved, 0K highmem) Oct 3 18:55:17.365011 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 18:55:17.365108 [ 0.000000] trace event string verifier disabled Oct 3 18:55:17.376977 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 18:55:17.377038 [ 0.000000] rcu: RCU event tracing is enabled. Oct 3 18:55:17.388905 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Oct 3 18:55:17.388941 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Oct 3 18:55:17.400983 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 18:55:17.401048 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 18:55:17.413007 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 18:55:17.413067 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 18:55:17.424980 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Oct 3 18:55:17.425044 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 18:55:17.437076 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 18:55:17.448907 [ 0.000012] Switching to timer-based delay loop, resolution 41ns Oct 3 18:55:17.461004 [ 0.000498] Console: colour dummy device 80x30 Oct 3 18:55:17.461043 [ 0.293137] printk: console [hvc0] enabled Oct 3 18:55:17.461069 [ 0.297328] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Oct 3 18:55:17.472998 [ 0.307729] CPU: Testing write buffer coherency: ok Oct 3 18:55:17.484963 [ 0.312672] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 18:55:17.485033 [ 0.322224] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 18:55:17.496988 [ 0.328638] pid_max: default: 32768 minimum: 301 Oct 3 18:55:17.497050 [ 0.333430] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 18:55:17.508907 [ 0.340705] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 18:55:17.521001 [ 0.349116] /cpus/cpu@0 missing clock-frequency property Oct 3 18:55:17.521058 [ 0.353908] /cpus/cpu@1 missing clock-frequency property Oct 3 18:55:17.521116 [ 0.359303] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 18:55:17.533027 [ 0.365815] xen:grant_table: Grant tables using version 1 layout Oct 3 18:55:17.533059 [ 0.371153] Grant table initialized Oct 3 18:55:17.544973 [ 0.374696] xen:events: Using FIFO-based ABI Oct 3 18:55:17.545034 [ 0.379010] Xen: initializing cpu0 Oct 3 18:55:17.545080 [ 0.382542] Setting up static identity map for 0x60300000 - 0x603000ac Oct 3 18:55:17.556984 [ 0.390287] rcu: Hierarchical SRCU implementation. Oct 3 18:55:17.557047 [ 0.393926] rcu: Max phase no-delay instances is 1000. Oct 3 18:55:17.568947 [ 0.401995] EFI services will not be available. Oct 3 18:55:17.568980 [ 0.405300] smp: Bringing up secondary CPUs ... Oct 3 18:55:17.580944 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 18:55:17.640991 [ 0.479773] Xen: initializing cpu1 Oct 3 18:55:17.653043 [ 0.479926] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 18:55:17.653106 [ 0.479955] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 18:55:17.664816 [ 0.498831] smp: Brought up 1 node, 2 CPUs Oct 3 18:55:17.664816 [ 0.502603] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 18:55:17.676986 [ 0.508913] CPU: All CPU(s) started in SVC mode. Oct 3 18:55:17.677027 [ 0.514317] devtmpfs: initialized Oct 3 18:55:17.688774 [ 0.526927] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 18:55:17.700850 [ 0.533416] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Oct 3 18:55:17.712881 [ 0.543138] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 18:55:17.712881 [ 0.551145] pinctrl core: initialized pinctrl subsystem Oct 3 18:55:17.724817 [ 0.557693] DMI not present or invalid. Oct 3 18:55:17.724817 [ 0.560791] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 18:55:17.734995 [ 0.567982] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 18:55:17.735035 [ 0.576769] thermal_sys: Registered thermal governor 'step_wise' Oct 3 18:55:17.748799 [ 0.576897] software IO TLB: area num 2. Oct 3 18:55:17.748799 [ 0.585581] software IO TLB: only able to allocate 8 MB Oct 3 18:55:17.760844 [ 0.592710] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Oct 3 18:55:17.760844 [ 0.597890] No ATAGs? Oct 3 18:55:17.772802 [ 0.600239] hw-breakpoint: Failed to enable monitor mode on CPU 0. Oct 3 18:55:17.772802 [ 0.608761] Serial: AMBA PL011 UART driver Oct 3 18:55:17.772802 [ 0.630902] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 62 Oct 3 18:55:17.808752 [ 0.680339] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 18:55:17.848846 [ 0.705895] xen:balloon: Initialising balloon driver Oct 3 18:55:17.872795 [ 0.713433] iommu: Default domain type: Translated Oct 3 18:55:17.885004 [ 0.716929] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 18:55:17.885073 [ 0.723881] SCSI subsystem initialized Oct 3 18:55:17.896873 [ 0.727439] usbcore: registered new interface driver usbfs Oct 3 18:55:17.896873 [ 0.732676] usbcore: registered new interface driver hub Oct 3 18:55:17.908882 [ 0.738068] usbcore: registered new device driver usb Oct 3 18:55:17.908882 [ 0.744698] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 18:55:17.920868 [ 0.748314] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 18:55:17.920868 [ 0.754617] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 18:55:17.932834 [ 0.763054] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 18:55:17.944831 [ 0.772198] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 18:55:17.944831 [ 0.777711] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 18:55:17.944831 [ 0.782398] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 18:55:17.956835 [ 0.788668] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 18:55:17.956835 [ 0.793877] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 18:55:17.968990 [ 0.798649] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 18:55:17.968990 [ 0.804772] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 18:55:17.981021 [ 0.809963] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 18:55:17.981046 [ 0.814860] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 18:55:17.992887 [ 0.820893] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 18:55:17.992887 [ 0.826662] pps_core: LinuxPPS API ver. 1 registered Oct 3 18:55:17.992887 [ 0.831102] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 18:55:18.004885 [ 0.840303] PTP clock support registered Oct 3 18:55:18.016810 [ 0.852385] EDAC MC: Ver: 3.0.0 Oct 3 18:55:18.016810 [ 0.862310] vgaarb: loaded Oct 3 18:55:18.028797 [ 0.867909] clocksource: Switched to clocksource arch_sys_counter Oct 3 18:55:18.040850 [ 0.879396] NET: Registered PF_INET protocol family Oct 3 18:55:18.052867 [ 0.883033] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Oct 3 18:55:18.052867 [ 0.890937] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 18:55:18.064866 [ 0.898637] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 18:55:18.076889 [ 0.906429] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Oct 3 18:55:18.076889 [ 0.914281] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Oct 3 18:55:18.088866 [ 0.921568] TCP: Hash tables configured (established 4096 bind 4096) Oct 3 18:55:18.100884 [ 0.927931] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 18:55:18.100884 [ 0.934474] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 18:55:18.112942 [ 0.941613] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 18:55:18.112942 [ 0.950945] RPC: Registered named UNIX socket transport module. Oct 3 18:55:18.124903 [ 0.955492] RPC: Registered udp transport module. Oct 3 18:55:18.124903 [ 0.960281] RPC: Registered tcp transport module. Oct 3 18:55:18.136875 [ 0.965039] RPC: Registered tcp NFSv4.1 backchannel transport module. Oct 3 18:55:18.136875 [ 0.971563] PCI: CLS 0 bytes, default 64 Oct 3 18:55:18.136875 [ 0.976855] Initialise system trusted keyrings Oct 3 18:55:18.148875 [ 0.980207] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Oct 3 18:55:18.148875 [ 0.991739] squashfs: version 4.0 (2009/01/31) Phillip Lougher Oct 3 18:55:18.160865 [ 0.996725] NFS: Registering the id_resolver key type Oct 3 18:55:18.172863 [ 1.001379] Key type id_resolver registered Oct 3 18:55:18.172863 [ 1.002921] Trying to unpack rootfs image as initramfs... Oct 3 18:55:18.172863 [ 1.005573] Key type id_legacy registered Oct 3 18:55:18.184881 [ 1.015222] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Oct 3 18:55:18.184881 [ 1.021908] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Oct 3 18:55:18.196825 [ 1.069251] Key type asymmetric registered Oct 3 18:55:18.245014 [ 1.071980] Asymmetric key parser 'x509' registered Oct 3 18:55:18.245093 [ 1.077043] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 18:55:18.256949 [ 1.084413] io scheduler mq-deadline registered Oct 3 18:55:18.257055 [ 1.089000] io scheduler kyber registered Oct 3 18:55:18.257079 [ 1.099160] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 18:55:18.268858 [ 1.184409] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 18:55:18.352854 [ 1.190642] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 18:55:18.364965 [ 1.219481] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 18:55:18.388549 [ 1.225705] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 18:55:18.400762 [ 1.262637] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 18:55:18.436963 [ 1.268914] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 18:55:18.448872 [ 1.302812] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 18:55:18.472947 [ 1.309111] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 18:55:18.481777 [ 1.347414] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 18:55:18.517809 [ 1.434231] xen:xen_evtchn: Event-channel device installed Oct 3 18:55:18.601793 [ 1.542462] Freeing initrd memory: 11780K Oct 3 18:55:18.716872 [ 1.615122] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 18:55:18.789026 [ 1.623822] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 113, base_baud = 0) is a S3C6400/10 Oct 3 18:55:18.801058 [ 1.631889] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 114, base_baud = 0) is a S3C6400/10 Oct 3 18:55:18.813049 [ 1.640881] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 115, base_baud = 0) is a S3C6400/10 Oct 3 18:55:18.813124 [ 1.650202] SuperH (H)SCI(F) driver initialized Oct 3 18:55:18.824976 [ 1.655113] STMicroelectronics ASC driver initialized Oct 3 18:55:18.825075 [ 1.660585] STM32 USART driver initialized Oct 3 18:55:18.825125 [ 1.668774] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 18:55:18.836919 [ 1.708348] brd: module loaded Oct 3 18:55:18.872876 [ 1.714201] loop: module loaded Oct 3 18:55:18.884934 [ 1.731319] Invalid max_queues (4), will use default max: 2. Oct 3 18:55:18.896885 [ 1.757961] tun: Universal TUN/TAP device driver, 1.6 Oct 3 18:55:18.933015 [ 1.761825] CAN device driver interface Oct 3 18:55:18.933074 [ 1.766913] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Oct 3 18:55:18.933124 [ 1.777376] xen_netfront: Initialising Xen virtual ethernet driver Oct 3 18:55:18.944971 [ 1.782301] pegasus: Pegasus/Pegasus II USB Ethernet driver Oct 3 18:55:18.956855 [ 1.787851] usbcore: registered new interface driver pegasus Oct 3 18:55:18.956855 [ 1.793594] usbcore: registered new interface driver asix Oct 3 18:55:18.969149 [ 1.799073] usbcore: registered new interface driver ax88179_178a Oct 3 18:55:18.969252 [ 1.805202] usbcore: registered new interface driver cdc_ether Oct 3 18:55:18.977682 [ 1.811125] usbcore: registered new interface driver smsc75xx Oct 3 18:55:18.989742 [ 1.816929] usbcore: registered new interface driver smsc95xx Oct 3 18:55:18.989806 [ 1.822756] usbcore: registered new interface driver net1080 Oct 3 18:55:18.989856 [ 1.828500] usbcore: registered new interface driver cdc_subset Oct 3 18:55:19.001743 [ 1.834452] usbcore: registered new interface driver zaurus Oct 3 18:55:19.001805 [ 1.840114] usbcore: registered new interface driver cdc_ncm Oct 3 18:55:19.013727 [ 1.849395] usbcore: registered new interface driver usb-storage Oct 3 18:55:19.025676 [ 1.883782] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 18:55:19.049690 [ 1.892594] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T18:55:20 UTC (1727981720) Oct 3 18:55:19.061741 [ 1.901150] i2c_dev: i2c /dev entries driver Oct 3 18:55:19.073636 [ 1.911415] syscon-poweroff 10040000.system-controller:syscon-poweroff: pm_power_off already claimed for psci_sys_poweroff Oct 3 18:55:19.085749 [ 1.921107] syscon-poweroff: probe of 10040000.system-controller:syscon-poweroff failed with error -16 Oct 3 18:55:19.097748 [ 1.932331] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 18:55:19.109693 [ 1.943133] device-mapper: uevent: version 1.0.3 Oct 3 18:55:19.109754 [ 1.946601] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Oct 3 18:55:19.121753 [ 1.955583] cpu cpu0: OPP table can't be empty Oct 3 18:55:19.121812 [ 1.960602] failed to register cpuidle driver Oct 3 18:55:19.133739 [ 1.963823] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Oct 3 18:55:19.133804 [ 1.972105] sdhci: Secure Digital Host Controller Interface driver Oct 3 18:55:19.145754 [ 1.977188] sdhci: Copyright(c) Pierre Ossman Oct 3 18:55:19.145815 [ 1.985168] sdhci-pltfm: SDHCI platform and OF driver helper Oct 3 18:55:19.157741 [ 1.992833] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 18:55:19.169751 [ 1.998178] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Oct 3 18:55:19.169816 [ 2.004736] usbcore: registered new interface driver usbhid Oct 3 18:55:19.181718 [ 2.009654] usbhid: USB HID core driver Oct 3 18:55:19.181778 [ 2.020452] NET: Registered PF_INET6 protocol family Oct 3 18:55:19.193729 [ 2.025029] Segment Routing with IPv6 Oct 3 18:55:19.193788 [ 2.027810] In-situ OAM (IOAM) with IPv6 Oct 3 18:55:19.193835 [ 2.031881] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Oct 3 18:55:19.205754 [ 2.038262] NET: Registered PF_PACKET protocol family Oct 3 18:55:19.205816 [ 2.042898] can: controller area network core Oct 3 18:55:19.217715 [ 2.047347] NET: Registered PF_CAN protocol family Oct 3 18:55:19.217811 [ 2.052209] can: raw protocol Oct 3 18:55:19.217858 [ 2.055207] can: broadcast manager protocol Oct 3 18:55:19.229772 [ 2.059512] can: netlink gateway - max_hops=1 Oct 3 18:55:19.229832 [ 2.064165] Key type dns_resolver registered Oct 3 18:55:19.229879 [ 2.068877] ThumbEE CPU extension supported. Oct 3 18:55:19.241775 [ 2.072572] Registering SWP/SWPB emulation handler Oct 3 18:55:19.241836 [ 2.077938] Loading compiled-in X.509 certificates Oct 3 18:55:19.253713 [ 2.106245] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 18:55:19.277781 [ 2.112357] clk: Not disabling unused clocks Oct 3 18:55:19.277841 [ 2.119396] Freeing unused kernel image (initmem) memory: 2048K Oct 3 18:55:19.289776 [ 2.125512] Run /init as init process Oct 3 18:55:19.289833 Loading, please wait... Oct 3 18:55:19.325678 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 18:55:19.385699 [ 3.548615] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 18:55:20.717712 [ 3.565675] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 18:55:20.741605 [ 3.601506] Synopsys Designware Multimedia Card Interface Driver Oct 3 18:55:20.777686 [ 3.628806] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 18:55:20.801811 [ 3.635156] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 18:55:20.813791 [ 3.640864] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 18:55:20.813889 [ 3.646413] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 125,32 bit host data width,128 deep fifo Oct 3 18:55:20.825705 [ 3.660799] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 18:55:20.837738 [ 3.694933] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 18:55:20.861699 [ 3.698654] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 18:55:20.873732 [ 3.705151] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 18:55:20.873781 [ 3.710695] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo Oct 3 18:55:20.885788 [ 3.720745] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Oct 3 18:55:20.897767 [ 3.721619] mmc_host mmc0: card is polling. Oct 3 18:55:20.897828 [ 3.730547] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 18:55:20.909743 [ 3.739177] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 18:55:20.909813 [ 3.742858] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 18:55:20.921746 [ 3.758673] s3c-rtc 101e0000.rtc: registered as rtc1 Oct 3 18:55:20.933804 [ 3.779024] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 18:55:20.957853 [ 3.785116] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 18:55:20.957923 [ 3.787988] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 18:55:20.969653 [ 3.804805] phy phy-12130000.phy.9: phy_power_on was called before phy_init Oct 3 18:55:20.981665 [ 3.810473] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 18:55:20.981698 [ 3.816013] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Oct 3 18:55:20.993770 [ 3.820256] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 18:55:20.993836 [ 3.830903] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Oct 3 18:55:21.005750 [ 3.839782] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 18:55:21.017713 [ 3.894080] exynos-ehci 12110000.usb: irq 128, io mem 0x12110000 Oct 3 18:55:21.065733 [ 3.894262] scsi host0: ahci-dwc Oct 3 18:55:21.065793 [ 3.928298] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 129 Oct 3 18:55:21.101766 [ 3.940152] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 18:55:21.113751 [ 3.944979] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 18:55:21.125707 [ 3.956059] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 18:55:21.125707 [ 3.958981] hub 1-0:1.0: USB hub found Oct 3 18:55:21.137740 [ 3.968513] hub 1-0:1.0: 3 ports detected Oct 3 18:55:21.137799 [ 3.980616] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 18:55:21.149768 [ 3.981287] phy phy-12130000.phy.9: phy_power_on was called before phy_init Oct 3 18:55:21.161747 [ 3.992316] exynos-ohci 12120000.usb: USB Host Controller Oct 3 18:55:21.161810 [ 3.997780] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Oct 3 18:55:21.173759 [ 4.006379] mmc1: new high speed SDHC card at address aaaa Oct 3 18:55:21.173820 [ 4.012456] mmc0: new DDR MMC card at address 0001 Oct 3 18:55:21.185713 [ 4.016919] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Oct 3 18:55:21.185774 [ 4.047951] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Oct 3 18:55:21.221702 [ 4.057150] mmcblk0: p1 p2 p3 p4 Oct 3 18:55:21.221760 [ 4.094468] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Oct 3 18:55:21.269710 [ 4.119545] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Oct 3 18:55:21.293666 [ 4.135939] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Oct 3 18:55:21.305744 [ 4.141933] exynos-ohci 12120000.usb: irq 128, io mem 0x12120000 Oct 3 18:55:21.317693 [ 4.214009] hub 2-0:1.0: USB hub found Oct 3 18:55:21.377637 [ 4.219078] hub 2-0:1.0: 3 ports detected Oct 3 18:55:21.389571 [ 4.437931] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 18:55:21.605783 [ 4.443999] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 18:55:21.617726 [ 4.449545] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 18:55:21.617762 [ 4.458491] ata1.00: configured for UDMA/133 Oct 3 18:55:21.629768 [ 4.462568] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 18:55:21.641767 [ 4.494537] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 18:55:21.665792 [ 4.500678] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 18:55:21.677711 [ 4.522758] sd 0:0:0:0: [sda] Write Protect is off Oct 3 18:55:21.689752 [ 4.529496] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 18:55:21.701759 [ 4.545912] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 18:55:21.713755 [ 4.585919] sda: sda1 sda2 < sda5 > Oct 3 18:55:21.749676 [ 4.589224] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 18:55:21.761726 [ 4.617799] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Oct 3 18:55:21.785751 [ 4.624727] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 18:55:21.797655 [ 4.629162] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 18:55:21.809654 [ 4.644701] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 18:55:21.821630 [ 4.673237] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Oct 3 18:55:21.845658 [ 4.678129] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 18:55:21.845658 [ 4.683443] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 18:55:21.857670 [ 4.691186] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 18:55:21.869609 [ 4.710067] hub 3-0:1.0: USB hub found Oct 3 18:55:21.881670 [ 4.712805] hub 3-0:1.0: 1 port detected Oct 3 18:55:21.881670 [ 4.718096] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 18:55:21.893666 [ 4.725580] hub 4-0:1.0: USB hub found Oct 3 18:55:21.893666 [ 4.728695] hub 4-0:1.0: 1 port detected Oct 3 18:55:21.905601 [ 4.798063] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 18:55:21.977610 [ 4.870030] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 18:55:22.049794 [ 4.978711] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 18:55:22.157707 [ 5.086815] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 18:55:22.265713 [ 5.194924] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 18:55:22.373613 [ 5.303003] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 18:55:22.481748 [ 5.411081] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 18:55:22.589790 [ 5.519145] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 18:55:22.697692 [ 5.627197] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 18:55:22.805624 [ 5.735260] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 18:55:22.913621 [ 6.143973] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 18:55:23.313718 [ 6.251694] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 18:55:23.421814 [ 6.860020] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 18:55:24.036732 [ 7.167915] random: crng init done Oct 3 18:55:24.340810 Begin: Loading essential drivers ... done. Oct 3 18:55:24.868853 Begin: Running /scripts/init-premount ... done. Oct 3 18:55:27.885925 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 18:55:27.897703 Begin: Running /scripts/local-premount ... done. Oct 3 18:55:27.897767 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 18:55:27.957598 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 18:55:28.077703 /dev/mapper/arndale--westfield--vg-root: clean, 46658/1220608 files, 644576/4882432 blocks Oct 3 18:55:28.281731 done. Oct 3 18:55:28.281796 [ 11.124647] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 18:55:28.293702 [ 11.470606] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 18:55:28.644803 done. Oct 3 18:55:28.661921 Begin: Running /scripts/local-bottom ... done. Oct 3 18:55:28.680868 Begin: Running /scripts/init-bottom ... done. Oct 3 18:55:28.725579 INIT: version 3.06 booting Oct 3 18:55:29.169702 INIT: No inittab.d directory found Oct 3 18:55:29.253677 Using makefile-style concurrent boot in runlevel S. Oct 3 18:55:29.517726 Starting hotplug events dispatcher: systemd-udevd. Oct 3 18:55:31.077655 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 18:55:31.569690 Synthesizing the initial hotplug events (devices)...done. Oct 3 18:55:32.472757 Waiting for /dev to be fully populated...[ 15.360197] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Oct 3 18:55:32.536797 [ 15.390083] s5p-secss 10830000.sss: s5p-sss driver registered Oct 3 18:55:32.560794 [ 15.406185] mc: Linux media interface: v0.10 Oct 3 18:55:32.572780 [ 15.486857] videodev: Linux video capture interface: v2.00 Oct 3 18:55:32.656782 [ 15.727986] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 18:55:32.908757 [ 15.800958] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 18:55:32.980757 [ 15.838869] exynos-gsc 13e00000.gsc: Adding to iommu group 0 Oct 3 18:55:33.004788 [ 15.844152] s5p-mfc 11000000.codec: Adding to iommu group 1 Oct 3 18:55:33.016817 [ 15.849129] exynos-gsc 13e10000.gsc: Adding to iommu group 2 Oct 3 18:55:33.016817 [ 15.859667] exynos-gsc 13e20000.gsc: Adding to iommu group 3 Oct 3 18:55:33.028815 [ 15.865102] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Oct 3 18:55:33.040921 [ 15.871275] exynos-gsc 13e30000.gsc: Adding to iommu group 4 Oct 3 18:55:33.040959 [ 15.907661] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 18:55:33.076813 [ 15.921144] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 18:55:33.100827 [ 15.929233] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 18:55:33.100827 [ 15.940771] blk_print_req_error: 6 callbacks suppressed Oct 3 18:55:33.112832 [ 15.940781] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 18:55:33.124854 [ 15.953645] s5p-mfc 11000000.codec: decoder registered as /dev/video4 Oct 3 18:55:33.124854 [ 15.974194] s5p-mfc 11000000.codec: encoder registered as /dev/video5 Oct 3 18:55:33.148779 [ 16.007937] usb3503 usb-hub: switched to HUB mode Oct 3 18:55:33.172796 [ 16.011447] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 18:55:33.184772 [ 16.054203] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 18:55:33.232768 [ 16.162294] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 18:55:33.340766 [ 16.270389] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 18:55:33.448814 [ 16.272087] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Oct 3 18:55:33.448814 [ 16.317139] wm8994 3-001a: Device is not a WM8994, ID is 0 Oct 3 18:55:33.484743 [ 16.330447] wm8994: probe of 3-001a failed with error -22 Oct 3 18:55:33.496788 [ 16.387909] usb 1-3: new high-speed USB device number 2 using exynos-ehci Oct 3 18:55:33.556810 [ 16.393532] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 18:55:33.568794 [ 16.502903] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 18:55:33.676805 [ 16.598930] hub 1-3:1.0: USB hub found Oct 3 18:55:33.772800 [ 16.601559] hub 1-3:1.0: 3 ports detected Oct 3 18:55:33.772800 [ 16.611029] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 18:55:33.784895 [ 16.708938] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 18:55:33.880829 [ 16.716579] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 18:55:33.892828 [ 16.719239] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 18:55:33.904846 [ 16.725350] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 18:55:33.916824 [ 16.746239] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 18:55:33.916824 [ 16.754345] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 18:55:33.928827 [ 16.763021] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 18:55:33.940785 [ 16.957959] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 18:55:34.132912 [ 17.120710] hub 1-3.2:1.0: USB hub found Oct 3 18:55:34.288892 [ 17.123750] hub 1-3.2:1.0: 4 ports detected Oct 3 18:55:34.288927 [ 17.146183] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 18:55:34.324906 [ 17.200514] usbcore: registered new device driver onboard-usb-hub Oct 3 18:55:34.372929 [ 17.253992] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 18:55:34.432765 [ 17.319615] hub 1-3.2:1.0: USB hub found Oct 3 18:55:34.492748 [ 17.322578] hub 1-3.2:1.0: 4 ports detected Oct 3 18:55:34.492748 [ 17.333929] hub 1-3.2:1.0: USB hub found Oct 3 18:55:34.504797 [ 17.337978] hub 1-3.2:1.0: 4 ports detected Oct 3 18:55:34.504797 [ 17.657937] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 18:55:34.828798 [ 17.812205] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 18:55:34.984857 [ 17.862394] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 18:55:35.032801 [ 18.509953] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 18:55:35.684808 [ 18.524824] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Oct 3 18:55:35.696830 [ 18.534623] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 4a:52:83:a3:0a:4f Oct 3 18:55:35.708818 done. Oct 3 18:55:35.984752 [ 19.163687] EXT4-fs (dm-0): re-mounted. Quota mode: disabled. Oct 3 18:55:36.332790 Checking file systems.../dev/sda1: clean, 2105/61056 files, 43334/243968 blocks Oct 3 18:55:37.464898 done. Oct 3 18:55:37.500811 Cleaning up temporary files... /tmp Oct 3 18:55:37.692772 . Oct 3 18:55:37.692772 [ 20.710341] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 18:55:37.884776 [ 20.759047] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 18:55:37.932791 [ 20.854450] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k Oct 3 18:55:38.028800 Mounting local filesystems...done. Oct 3 18:55:38.268795 Activating swapfile swap, if any...done. Oct 3 18:55:38.268795 Cleaning up temporary files.... Oct 3 18:55:38.304865 Starting Setting kernel variables: sysctl. Oct 3 18:55:38.436768 [ 22.640727] xenbr0: port 1(eth0) entered blocking state Oct 3 18:55:39.812853 [ 22.644584] xenbr0: port 1(eth0) entered disabled state Oct 3 18:55:39.812853 [ 22.650069] device eth0 entered promiscuous mode Oct 3 18:55:39.824802 [ 22.660078] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 18:55:39.836768 Configuring network interfaces...RTNETLINK answers: Operation not supported Oct 3 18:55:41.741052 Oct 3 18:55:41.741124 Waiting for xenbr0 to get ready (MAXWAIT is 2 seconds). Oct 3 18:55:41.752836 [ 24.896603] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 18:55:42.064859 [ 24.896649] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 3 18:55:42.076879 [ 24.908963] xenbr0: port 1(eth0) entered blocking state Oct 3 18:55:42.077063 [ 24.914184] xenbr0: port 1(eth0) entered forwarding state Oct 3 18:55:42.088798 [ 24.919741] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready Oct 3 18:55:42.088798 done. Oct 3 18:55:42.316839 Cleaning up temporary files.... Oct 3 18:55:42.364812 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Oct 3 18:55:42.461035 Starting nftables: none Oct 3 18:55:42.552850 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Oct 3 18:55:42.648913 failed! Oct 3 18:55:42.648913 startpar: service(s) returned failure: nftables ... failed! Oct 3 18:55:42.660839 INIT: Entering runlevel: 2 Oct 3 18:55:42.672988 Using makefile-style concurrent boot in runlevel 2. Oct 3 18:55:42.684875 Starting Apache httpd web server: apache2AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.149.64.45. Set the 'ServerName' directive globally to suppress this message Oct 3 18:55:43.488864 . Oct 3 18:55:44.548867 [ 27.539757] platform sound: deferred probe pending Oct 3 18:55:44.701731 Starting NTP server: ntpd2024-10-03T18:55:45 ntpd[1151]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 18:55:44.977778 2024-10-03T18:55:45 ntpd[1151]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 18:55:44.989754 . Oct 3 18:55:44.989804 Starting system message bus: dbus. Oct 3 18:55:45.325737 Starting SMP IRQ Balancer: irqbalance. Oct 3 18:55:45.793775 Starting OpenBSD Secure Shell server: sshd. Oct 3 18:55:46.261742 (XEN) common/grant_table.c:1909:d0v1 Expanding d0 grant table from 1 to 2 frames Oct 3 18:55:48.925893 Starting /usr/local/sbin/xenstored... Oct 3 18:55:48.925961 Setting domain 0 name, domid and JSON config... Oct 3 18:55:48.937857 Done setting up Dom0 Oct 3 18:55:48.937912 Starting xenconsoled... Oct 3 18:55:48.937955 Starting QEMU as disk backend for dom0 Oct 3 18:55:48.937999 [ 31.878143] vif vif-1 enX1: renamed from eth1 Oct 3 18:55:49.049637 Starting libvirt management daemon: libvirtd2024-10-03 18:55:50.454+0000: 1273: info : libvirt version: 10.9.0 Oct 3 18:55:49.649889 2024-10-03 18:55:50.454+0000: 1273: info : hostname: arndale-westfield Oct 3 18:55:49.670310 2024-10-03 18:55:50.454+0000: 1273: debug : virLogParseOutputs:1638 : outputs=1:file:/var/log/libvirt/libvirtd.log Oct 3 18:55:49.673632 2024-10-03 18:55:50.455+0000: 1273: debug : virLogParseOutput:1485 : output=1:file:/var/log/libvirt/libvirtd.log Oct 3 18:55:49.673632 . Oct 3 18:55:49.673632 Oct 3 18:55:50.777688 Debian GNU/Linux 12 arndale-westfield hvc0 Oct 3 18:55:50.777688 Oct 3 18:55:50.777688 arndale-westfield login: [ 116.117525] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 18:57:13.284869 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 18:57:29.817026 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 19:04:10.193753 [ 638.966173] EXT4-fs (dm-3): unmounting filesystem. Oct 3 19:05:56.128733 [ 645.920971] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 19:06:03.085812 [ 650.956836] EXT4-fs (dm-3): unmounting filesystem. Oct 3 19:06:08.113780 [ 669.377186] xenbr0: port 2(vif1.0) entered blocking state Oct 3 19:06:26.537760 [ 669.381281] xenbr0: port 2(vif1.0) entered disabled state Oct 3 19:06:26.549720 [ 669.386860] device vif1.0 entered promiscuous mode Oct 3 19:06:26.549777 (XEN) d1v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 19:06:27.653703 (XEN) d1v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 19:06:27.665588 (XEN) gnttab_mark_dirty not implemented yet Oct 3 19:06:28.625623 (XEN) common/grant_table.c:1909:d1v0 Expanding d1 grant table from 1 to 2 frames Oct 3 19:06:28.685562 [ 671.619251] vif vif-1-0 vif1.0: Guest Rx ready Oct 3 19:06:28.781629 [ 671.628507] IPv6: ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready Oct 3 19:06:28.793680 [ 671.633748] xenbr0: port 2(vif1.0) entered blocking state Oct 3 19:06:28.805596 [ 671.639095] xenbr0: port 2(vif1.0) entered forwarding state Oct 3 19:06:28.805596 [ 713.955827] xenbr0: port 2(vif1.0) entered disabled state Oct 3 19:07:11.113770 [ 714.188360] xenbr0: port 2(vif1.0) entered disabled state Oct 3 19:07:11.353764 [ 714.193150] device vif1.0 left promiscuous mode Oct 3 19:07:11.353826 [ 714.197010] xenbr0: port 2(vif1.0) entered disabled state Oct 3 19:07:11.365675 [ 770.300887] xenbr0: port 2(vif2.0) entered blocking state Oct 3 19:08:07.464886 [ 770.304922] xenbr0: port 2(vif2.0) entered disabled state Oct 3 19:08:07.464886 [ 770.310605] device vif2.0 entered promiscuous mode Oct 3 19:08:07.476843 (XEN) d2v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 19:08:08.572820 (XEN) d2v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 19:08:08.584827 (XEN) common/grant_table.c:1909:d2v0 Expanding d2 grant table from 1 to 2 frames Oct 3 19:08:09.209053 [ 772.264551] vif vif-2-0 vif2.0: Guest Rx ready Oct 3 19:08:09.424865 [ 772.267809] IPv6: ADDRCONF(NETDEV_CHANGE): vif2.0: link becomes ready Oct 3 19:08:09.436889 [ 772.274284] xenbr0: port 2(vif2.0) entered blocking state Oct 3 19:08:09.436889 [ 772.279646] xenbr0: port 2(vif2.0) entered forwarding state Oct 3 19:08:09.448824 [ 819.195452] xenbr0: port 2(vif2.0) entered disabled state Oct 3 19:08:56.360670 [ 819.318671] xenbr0: port 2(vif2.0) entered disabled state Oct 3 19:08:56.480719 [ 819.323352] device vif2.0 left promiscuous mode Oct 3 19:08:56.480719 [ 819.327321] xenbr0: port 2(vif2.0) entered disabled state Oct 3 19:08:56.492676 [ 873.893103] xenbr0: port 2(vif3.0) entered blocking state Oct 3 19:09:51.053840 [ 873.897136] xenbr0: port 2(vif3.0) entered disabled state Oct 3 19:09:51.065702 [ 873.902832] device vif3.0 entered promiscuous mode Oct 3 19:09:51.065764 (XEN) d3v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 19:09:52.161799 (XEN) d3v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 19:09:52.181674 (XEN) common/grant_table.c:1909:d3v0 Expanding d3 grant table from 1 to 2 frames Oct 3 19:09:52.713740 [ 875.610224] vif vif-3-0 vif3.0: Guest Rx ready Oct 3 19:09:52.773756 [ 875.614603] IPv6: ADDRCONF(NETDEV_CHANGE): vif3.0: link becomes ready Oct 3 19:09:52.773823 [ 875.619965] xenbr0: port 2(vif3.0) entered blocking state Oct 3 19:09:52.785738 [ 875.625361] xenbr0: port 2(vif3.0) entered forwarding state Oct 3 19:09:52.785801 [ 915.064789] xenbr0: port 2(vif3.0) entered disabled state Oct 3 19:10:32.229792 [ 915.208398] xenbr0: port 2(vif3.0) entered disabled state Oct 3 19:10:32.373810 [ 915.213295] device vif3.0 left promiscuous mode Oct 3 19:10:32.373876 [ 915.217058] xenbr0: port 2(vif3.0) entered disabled state Oct 3 19:10:32.373927 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 19:10:51.608773 [ 970.781311] xenbr0: port 2(vif4.0) entered blocking state Oct 3 19:11:27.944127 [ 970.785372] xenbr0: port 2(vif4.0) entered disabled state Oct 3 19:11:27.944772 [ 970.791036] device vif4.0 entered promiscuous mode Oct 3 19:11:27.956999 (XEN) d4v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 19:11:29.049720 (XEN) d4v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 19:11:29.061723 (XEN) common/grant_table.c:1909:d4v0 Expanding d4 grant table from 1 to 2 frames Oct 3 19:11:29.949648 [ 972.912417] vif vif-4-0 vif4.0: Guest Rx ready Oct 3 19:11:30.069823 [ 972.916126] IPv6: ADDRCONF(NETDEV_CHANGE): vif4.0: link becomes ready Oct 3 19:11:30.081822 [ 972.922218] xenbr0: port 2(vif4.0) entered blocking state Oct 3 19:11:30.081887 [ 972.927477] xenbr0: port 2(vif4.0) entered forwarding state Oct 3 19:11:30.093748 [ 1012.081200] xenbr0: port 2(vif4.0) entered disabled state Oct 3 19:12:09.245622 [ 1012.238386] xenbr0: port 2(vif4.0) entered disabled state Oct 3 19:12:09.401827 [ 1012.243067] device vif4.0 left promiscuous mode Oct 3 19:12:09.401905 [ 1012.247068] xenbr0: port 2(vif4.0) entered disabled state Oct 3 19:12:09.413676 [ 1067.206631] xenbr0: port 2(vif5.0) entered blocking state Oct 3 19:13:04.372901 [ 1067.210710] xenbr0: port 2(vif5.0) entered disabled state Oct 3 19:13:04.372901 [ 1067.216298] device vif5.0 entered promiscuous mode Oct 3 19:13:04.372901 (XEN) d5v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 19:13:05.477706 (XEN) d5v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 19:13:05.489664 (XEN) common/grant_table.c:1909:d5v0 Expanding d5 grant table from 1 to 2 frames Oct 3 19:13:06.365825 [ 1069.334454] vif vif-5-0 vif5.0: Guest Rx ready Oct 3 19:13:06.497824 [ 1069.337578] IPv6: ADDRCONF(NETDEV_CHANGE): vif5.0: link becomes ready Oct 3 19:13:06.497890 [ 1069.344249] xenbr0: port 2(vif5.0) entered blocking state Oct 3 19:13:06.509814 [ 1069.353063] xenbr0: port 2(vif5.0) entered forwarding state Oct 3 19:13:06.521745 [ 1108.719323] xenbr0: port 2(vif5.0) entered disabled state Oct 3 19:13:45.877045 [ 1108.888398] xenbr0: port 2(vif5.0) entered disabled state Oct 3 19:13:46.044844 [ 1108.892892] device vif5.0 left promiscuous mode Oct 3 19:13:46.056872 [ 1108.897051] xenbr0: port 2(vif5.0) entered disabled state Oct 3 19:13:46.056872 [ 1164.462809] xenbr0: port 2(vif6.0) entered blocking state Oct 3 19:14:41.625767 [ 1164.466845] xenbr0: port 2(vif6.0) entered disabled state Oct 3 19:14:41.625840 [ 1164.472539] device vif6.0 entered promiscuous mode Oct 3 19:14:41.625890 (XEN) d6v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 19:14:42.729750 (XEN) d6v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 19:14:42.741683 (XEN) common/grant_table.c:1909:d6v0 Expanding d6 grant table from 1 to 2 frames Oct 3 19:14:44.013699 [ 1166.929652] vif vif-6-0 vif6.0: Guest Rx ready Oct 3 19:14:44.085753 [ 1166.932810] IPv6: ADDRCONF(NETDEV_CHANGE): vif6.0: link becomes ready Oct 3 19:14:44.097754 [ 1166.939429] xenbr0: port 2(vif6.0) entered blocking state Oct 3 19:14:44.097818 [ 1166.944730] xenbr0: port 2(vif6.0) entered forwarding state Oct 3 19:14:44.097869 [ 1206.457234] xenbr0: port 2(vif6.0) entered disabled state Oct 3 19:15:23.613897 [ 1206.638752] xenbr0: port 2(vif6.0) entered disabled state Oct 3 19:15:23.793810 [ 1206.643162] device vif6.0 left promiscuous mode Oct 3 19:15:23.805727 [ 1206.647409] xenbr0: port 2(vif6.0) entered disabled state Oct 3 19:15:23.805805 [ 1261.487172] xenbr0: port 2(vif7.0) entered blocking state Oct 3 19:16:18.649890 [ 1261.491255] xenbr0: port 2(vif7.0) entered disabled state Oct 3 19:16:18.649966 [ 1261.496878] device vif7.0 entered promiscuous mode Oct 3 19:16:18.661757 (XEN) d7v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 19:16:19.753722 (XEN) d7v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 19:16:19.765716 (XEN) common/grant_table.c:1909:d7v0 Expanding d7 grant table from 1 to 2 frames Oct 3 19:16:20.485737 [ 1263.463925] vif vif-7-0 vif7.0: Guest Rx ready Oct 3 19:16:20.617795 [ 1263.467102] IPv6: ADDRCONF(NETDEV_CHANGE): vif7.0: link becomes ready Oct 3 19:16:20.629755 [ 1263.473672] xenbr0: port 2(vif7.0) entered blocking state Oct 3 19:16:20.629819 [ 1263.479039] xenbr0: port 2(vif7.0) entered forwarding state Oct 3 19:16:20.641672 [ 1303.328775] xenbr0: port 2(vif7.0) entered disabled state Oct 3 19:17:00.489715 [ 1303.468489] xenbr0: port 2(vif7.0) entered disabled state Oct 3 19:17:00.633709 [ 1303.479044] device vif7.0 left promiscuous mode Oct 3 19:17:00.633773 [ 1303.482227] xenbr0: port 2(vif7.0) entered disabled state Oct 3 19:17:00.645689 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 19:17:32.928866 [ 1358.254304] xenbr0: port 2(vif8.0) entered blocking state Oct 3 19:17:55.409750 [ 1358.258376] xenbr0: port 2(vif8.0) entered disabled state Oct 3 19:17:55.421737 [ 1358.263989] device vif8.0 entered promiscuous mode Oct 3 19:17:55.421798 (XEN) d8v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 19:17:56.513668 (XEN) d8v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 19:17:56.525685 (XEN) common/grant_table.c:1909:d8v0 Expanding d8 grant table from 1 to 2 frames Oct 3 19:17:57.425790 [ 1360.422745] vif vif-8-0 vif8.0: Guest Rx ready Oct 3 19:17:57.581734 [ 1360.425962] IPv6: ADDRCONF(NETDEV_CHANGE): vif8.0: link becomes ready Oct 3 19:17:57.581734 [ 1360.432784] xenbr0: port 2(vif8.0) entered blocking state Oct 3 19:17:57.593791 [ 1360.442692] xenbr0: port 2(vif8.0) entered forwarding state Oct 3 19:17:57.605897 [ 1400.021298] xenbr0: port 2(vif8.0) entered disabled state Oct 3 19:18:37.184836 [ 1400.159090] xenbr0: port 2(vif8.0) entered disabled state Oct 3 19:18:37.316861 [ 1400.163734] device vif8.0 left promiscuous mode Oct 3 19:18:37.316861 [ 1400.167779] xenbr0: port 2(vif8.0) entered disabled state Oct 3 19:18:37.328822 [ 1454.873128] xenbr0: port 2(vif9.0) entered blocking state Oct 3 19:19:32.033682 [ 1454.877163] xenbr0: port 2(vif9.0) entered disabled state Oct 3 19:19:32.033729 [ 1454.882880] device vif9.0 entered promiscuous mode Oct 3 19:19:32.033780 (XEN) d9v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 19:19:33.137665 (XEN) d9v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 19:19:33.161607 (XEN) common/grant_table.c:1909:d9v0 Expanding d9 grant table from 1 to 2 frames Oct 3 19:19:34.193681 [ 1457.187550] vif vif-9-0 vif9.0: Guest Rx ready Oct 3 19:19:34.337694 [ 1457.190714] IPv6: ADDRCONF(NETDEV_CHANGE): vif9.0: link becomes ready Oct 3 19:19:34.349684 [ 1457.197372] xenbr0: port 2(vif9.0) entered blocking state Oct 3 19:19:34.349718 [ 1457.202695] xenbr0: port 2(vif9.0) entered forwarding state Oct 3 19:19:34.361625 [ 1492.715324] xenbr0: port 2(vif9.0) entered disabled state Oct 3 19:20:09.873718 [ 1492.908451] xenbr0: port 2(vif9.0) entered disabled state Oct 3 19:20:10.057824 [ 1492.912861] device vif9.0 left promiscuous mode Oct 3 19:20:10.069751 [ 1492.917177] xenbr0: port 2(vif9.0) entered disabled state Oct 3 19:20:10.069815 [ 1548.495592] xenbr0: port 2(vif10.0) entered blocking state Oct 3 19:21:05.649769 [ 1548.499756] xenbr0: port 2(vif10.0) entered disabled state Oct 3 19:21:05.661685 [ 1548.505470] device vif10.0 entered promiscuous mode Oct 3 19:21:05.661745 (XEN) d10v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 19:21:06.765692 (XEN) d10v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 19:21:06.777679 (XEN) common/grant_table.c:1909:d10v0 Expanding d10 grant table from 1 to 2 frames Oct 3 19:21:07.697702 [ 1550.641043] vif vif-10-0 vif10.0: Guest Rx ready Oct 3 19:21:07.793741 [ 1550.644397] IPv6: ADDRCONF(NETDEV_CHANGE): vif10.0: link becomes ready Oct 3 19:21:07.805722 [ 1550.651113] xenbr0: port 2(vif10.0) entered blocking state Oct 3 19:21:07.805786 [ 1550.656454] xenbr0: port 2(vif10.0) entered forwarding state Oct 3 19:21:07.817707 [ 1585.963589] xenbr0: port 2(vif10.0) entered disabled state Oct 3 19:21:43.121697 [ 1586.168666] xenbr0: port 2(vif10.0) entered disabled state Oct 3 19:21:43.325758 [ 1586.173283] device vif10.0 left promiscuous mode Oct 3 19:21:43.325825 [ 1586.177484] xenbr0: port 2(vif10.0) entered disabled state Oct 3 19:21:43.337687 [ 1641.741276] xenbr0: port 2(vif11.0) entered blocking state Oct 3 19:22:38.897147 [ 1641.745401] xenbr0: port 2(vif11.0) entered disabled state Oct 3 19:22:38.909026 [ 1641.751174] device vif11.0 entered promiscuous mode Oct 3 19:22:38.909090 (XEN) d11v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 19:22:40.008865 (XEN) d11v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 19:22:40.020875 (XEN) common/grant_table.c:1909:d11v0 Expanding d11 grant table from 1 to 2 frames Oct 3 19:22:41.028847 [ 1644.035276] vif vif-11-0 vif11.0: Guest Rx ready Oct 3 19:22:41.185028 [ 1644.040558] IPv6: ADDRCONF(NETDEV_CHANGE): vif11.0: link becomes ready Oct 3 19:22:41.197078 [ 1644.045831] xenbr0: port 2(vif11.0) entered blocking state Oct 3 19:22:41.208868 [ 1644.051531] xenbr0: port 2(vif11.0) entered forwarding state Oct 3 19:22:41.208868 [ 1679.447123] xenbr0: port 2(vif11.0) entered disabled state Oct 3 19:23:16.605593 [ 1679.638544] xenbr0: port 2(vif11.0) entered disabled state Oct 3 19:23:16.797718 [ 1679.643528] device vif11.0 left promiscuous mode Oct 3 19:23:16.797788 [ 1679.647370] xenbr0: port 2(vif11.0) entered disabled state Oct 3 19:23:16.809651 [ 1735.185227] xenbr0: port 2(vif12.0) entered blocking state Oct 3 19:24:12.345983 [ 1735.189406] xenbr0: port 2(vif12.0) entered disabled state Oct 3 19:24:12.362569 [ 1735.195096] device vif12.0 entered promiscuous mode Oct 3 19:24:12.362646 (XEN) d12v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 19:24:13.437733 (XEN) d12v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 19:24:13.449674 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 19:24:13.461663 (XEN) common/grant_table.c:1909:d12v0 Expanding d12 grant table from 1 to 2 frames Oct 3 19:24:14.109668 [ 1737.088450] vif vif-12-0 vif12.0: Guest Rx ready Oct 3 19:24:14.241715 [ 1737.091833] IPv6: ADDRCONF(NETDEV_CHANGE): vif12.0: link becomes ready Oct 3 19:24:14.241822 [ 1737.098436] xenbr0: port 2(vif12.0) entered blocking state Oct 3 19:24:14.253743 [ 1737.103854] xenbr0: port 2(vif12.0) entered forwarding state Oct 3 19:24:14.253778 [ 1770.388836] xenbr0: port 2(vif12.0) entered disabled state Oct 3 19:24:47.541869 [ 1770.498298] xenbr0: port 2(vif12.0) entered disabled state Oct 3 19:24:47.649815 [ 1770.502830] device vif12.0 left promiscuous mode Oct 3 19:24:47.649877 [ 1770.507182] xenbr0: port 2(vif12.0) entered disabled state Oct 3 19:24:47.661824 Oct 3 19:25:08.811797 (XEN) *** Serial input to Xen (type 'CTRL-x' three times to switch input) Oct 3 19:25:08.837667 Oct 3 19:25:08.839238 Oct 3 19:25:09.831678 (XEN) '0' pressed -> dumping Dom0's registers Oct 3 19:25:09.857877 (XEN) *** Dumping Dom0 vcpu#0 state: *** Oct 3 19:25:09.857927 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Oct 3 19:25:09.860550 Not tainted ]---- Oct 3 19:25:09.869646 (XEN) CPU: 0 Oct 3 19:25:09.869699 (XEN) PC: c031ce28 Oct 3 19:25:09.869743 (XEN) CPSR: 600d0093 MODE:32-bit Guest SVC Oct 3 19:25:09.869789 (XEN) R0: 00000005 R1: 00000000 R2: 0051f121 R3: c031ce20 Oct 3 19:25:09.881714 (XEN) R4: c1909d80 R5: c1b12200 R6: c1904d1c R7: c1904d78 Oct 3 19:25:09.881809 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c00 Oct 3 19:25:09.893650 (XEN) USR: SP: be970948 LR: b6c1d893 Oct 3 19:25:09.893721 (XEN) SVC: SP: c1901f40 LR: c0308df0 SPSR:600d0013 Oct 3 19:25:09.893772 (XEN) ABT: SP: c1b22b10 LR: c0300ea0 SPSR:600f0193 Oct 3 19:25:09.905648 (XEN) UND: SP: c1b22b20 LR: c0300fa0 SPSR:600d0093 Oct 3 19:25:09.905702 (XEN) IRQ: SP: c1b22b00 LR: c0300ba0 SPSR:600d0193 Oct 3 19:25:09.917651 (XEN) FIQ: SP: c1b22b30 LR: c1b22b30 SPSR:00000000 Oct 3 19:25:09.917713 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 19:25:09.917765 (XEN) Oct 3 19:25:09.929636 (XEN) SCTLR: 10c5387d Oct 3 19:25:09.929689 (XEN) TCR: 00000000 Oct 3 19:25:09.929732 (XEN) TTBR0: 000000006539406a Oct 3 19:25:09.929776 (XEN) TTBR1: 000000006020406a Oct 3 19:25:09.929820 (XEN) IFAR: b6da7814, IFSR: 00000007 Oct 3 19:25:09.941632 (XEN) DFAR: 005c4318, DFSR: 0000081f Oct 3 19:25:09.941686 (XEN) Oct 3 19:25:09.941726 (XEN) VTCR_EL2: 80003558 Oct 3 19:25:09.941769 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 19:25:09.953636 (XEN) Oct 3 19:25:09.953685 (XEN) SCTLR_EL2: 30cd187f Oct 3 19:25:09.953729 (XEN) HCR_EL2: 007c663f Oct 3 19:25:09.953772 (XEN) TTBR0_EL2: 000000004110e000 Oct 3 19:25:09.953816 (XEN) Oct 3 19:25:09.953856 (XEN) ESR_EL2: 07e00000 Oct 3 19:25:09.965633 (XEN) HPFAR_EL2: 00104810 Oct 3 19:25:09.965685 (XEN) HDFAR: e0807f00 Oct 3 19:25:09.965729 (XEN) HIFAR: 40008000 Oct 3 19:25:09.965772 (XEN) Oct 3 19:25:09.965811 (XEN) Guest stack trace from sp=c1901f40: Oct 3 19:25:09.977702 (XEN) Failed to convert stack to physical address Oct 3 19:25:09.977759 (XEN) *** Dumping Dom0 vcpu#1 state: *** Oct 3 19:25:09.977805 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 19:25:09.989668 (XEN) CPU: 0 Oct 3 19:25:09.989718 (XEN) PC: c031ce28 Oct 3 19:25:09.989761 (XEN) CPSR: 600f0093 MODE:32-bit Guest SVC Oct 3 19:25:09.989807 (XEN) R0: 00000005 R1: 00000000 R2: 00498899 R3: c031ce20 Oct 3 19:25:10.001664 (XEN) R4: c210e600 R5: c1b12200 R6: c1904d1c R7: c1904d78 Oct 3 19:25:10.001721 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c00 Oct 3 19:25:10.013650 (XEN) USR: SP: bee7a970 LR: b6e846c5 Oct 3 19:25:10.013703 (XEN) SVC: SP: e08c9f90 LR: c0308df0 SPSR:600f0013 Oct 3 19:25:10.013751 (XEN) ABT: SP: c1b22b50 LR: c0300ea0 SPSR:60070193 Oct 3 19:25:10.025658 (XEN) UND: SP: c1b22b60 LR: c0300fa0 SPSR:60030093 Oct 3 19:25:10.025713 (XEN) IRQ: SP: c1b22b40 LR: c0300ba0 SPSR:600f0193 Oct 3 19:25:10.037644 (XEN) FIQ: SP: c1b22b70 LR: c1b22b70 SPSR:00000000 Oct 3 19:25:10.037697 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 19:25:10.049658 (XEN) Oct 3 19:25:10.049705 (XEN) SCTLR: 10c5387d Oct 3 19:25:10.049748 (XEN) TCR: 00000000 Oct 3 19:25:10.049789 (XEN) TTBR0: 00000000646e006a Oct 3 19:25:10.049832 (XEN) TTBR1: 000000006020406a Oct 3 19:25:10.061653 (XEN) IFAR: b6eefe78, IFSR: 00000007 Oct 3 19:25:10.061705 (XEN) DFAR: b6bdf000, DFSR: 0000081f Oct 3 19:25:10.061751 (XEN) Oct 3 19:25:10.061790 (XEN) VTCR_EL2: 80003558 Oct 3 19:25:10.061832 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 19:25:10.073634 (XEN) Oct 3 19:25:10.073680 (XEN) SCTLR_EL2: 30cd187f Oct 3 19:25:10.073722 (XEN) HCR_EL2: 007c663f Oct 3 19:25:10.073764 (XEN) TTBR0_EL2: 000000004110e000 Oct 3 19:25:10.073806 (XEN) Oct 3 19:25:10.073844 (XEN) ESR_EL2: 07e00000 Oct 3 19:25:10.085629 (XEN) HPFAR_EL2: 00104810 Oct 3 19:25:10.085678 (XEN) HDFAR: e0807f00 Oct 3 19:25:10.085720 (XEN) HIFAR: 40008000 Oct 3 19:25:10.085761 (XEN) Oct 3 19:25:10.085799 (XEN) Guest stack trace from sp=e08c9f90: Oct 3 19:25:10.097624 (XEN) Failed to convert stack to physical address Oct 3 19:25:10.097678 Oct 3 19:25:11.814107 (XEN) 'H' pressed -> dumping heap info (now = 1799972763375) Oct 3 19:25:11.837828 (XEN) heap[node=0][zone=0] -> 16276 pages Oct 3 19:25:11.837888 (XEN) heap[node=0][zone=1] -> 0 Oct 3 19:25:11.839210 pages Oct 3 19:25:11.849736 (XEN) heap[node=0][zone=2] -> 0 pages Oct 3 19:25:11.849792 (XEN) heap[node=0][zone=3] -> 0 pages Oct 3 19:25:11.849836 (XEN) heap[node=0][zone=4] -> 0 pages Oct 3 19:25:11.849881 (XEN) heap[node=0][zone=5] -> 0 pages Oct 3 19:25:11.861731 (XEN) heap[node=0][zone=6] -> 0 pages Oct 3 19:25:11.861789 (XEN) heap[node=0][zone=7] -> 0 pages Oct 3 19:25:11.861834 (XEN) heap[node=0][zone=8] -> 0 pages Oct 3 19:25:11.873756 (XEN) heap[node=0][zone=9] -> 0 pages Oct 3 19:25:11.873815 (XEN) heap[node=0][zone=10] -> 0 pages Oct 3 19:25:11.873860 (XEN) heap[node=0][zone=11] -> 0 pages Oct 3 19:25:11.873904 (XEN) heap[node=0][zone=12] -> 0 pages Oct 3 19:25:11.889787 (XEN) heap[node=0][zone=13] -> 0 pages Oct 3 19:25:11.889845 (XEN) heap[node=0][zone=14] -> 0 pages Oct 3 19:25:11.889890 (XEN) heap[node=0][zone=15] -> 0 pages Oct 3 19:25:11.889932 (XEN) heap[node=0][zone=16] -> 0 pages Oct 3 19:25:11.897719 (XEN) heap[node=0][zone=17] -> 0 pages Oct 3 19:25:11.897779 (XEN) heap[node=0][zone=18] -> 0 pages Oct 3 19:25:11.897825 (XEN) heap[node=0][zone=19] -> 130835 pages Oct 3 19:25:11.909753 (XEN) heap[node=0][zone=20] -> 241606 pages Oct 3 19:25:11.909812 (XEN) heap[node=0][zone=21] -> 0 pages Oct 3 19:25:11.909856 (XEN) heap[node=0][zone=22] -> 0 pages Oct 3 19:25:11.921742 (XEN) heap[node=0][zone=23] -> 0 pages Oct 3 19:25:11.921801 (XEN) heap[node=0][zone=24] -> 0 pages Oct 3 19:25:11.921846 (XEN) heap[node=0][zone=25] -> 0 pages Oct 3 19:25:11.933744 (XEN) heap[node=0][zone=26] -> 0 pages Oct 3 19:25:11.933804 (XEN) heap[node=0][zone=27] -> 0 pages Oct 3 19:25:11.933849 (XEN) heap[node=0][zone=28] -> 0 pages Oct 3 19:25:11.933893 Oct 3 19:25:13.794184 Oct 3 19:25:15.585812 Oct 3 19:25:15.801894 Oct 3 19:25:17.591824 Oct 3 19:25:17.826452 (XEN) Dumping timer queues: Oct 3 19:25:17.841803 (XEN) CPU00: Oct 3 19:25:17.841838 (XEN) ex= 7314us timer=43fdc968 cb=vti Oct 3 19:25:17.843380 mer.c#virt_timer_expired(43fdc960) Oct 3 19:25:17.853639 (XEN) CPU01: Oct 3 19:25:17.853639 (XEN) ex= 37314us timer=43fdc968 cb=vtimer.c#virt_timer_expired(43fdc960) Oct 3 19:25:17.853639 (XEN) ex= 44607us timer=43fee968 cb=vtimer.c#virt_timer_expired(43fee960) Oct 3 19:25:17.865715 Oct 3 19:25:19.838712 Oct 3 19:25:21.601710 Oct 3 19:25:21.849891 (XEN) 'd' pressed -> dumping registers Oct 3 19:25:21.865809 (XEN) Oct 3 19:25:21.865862 (XEN) *** Dumping CPU0 host state: *** Oct 3 19:25:21.865909 (XEN) ----[ Xen-4.20-unstable arm32 debug=y N Oct 3 19:25:21.868168 ot tainted ]---- Oct 3 19:25:21.877734 (XEN) CPU: 0 Oct 3 19:25:21.877795 (XEN) PC: 0025f53c domain.c#idle_loop+0x130/0x1ac Oct 3 19:25:21.877845 (XEN) CPSR: 600f005a MODE:Hypervisor Oct 3 19:25:21.877889 (XEN) R0: 00000000 R1: 00000001 R2: 00000000 R3: 00000000 Oct 3 19:25:21.889800 (XEN) R4: 00000000 R5: 003000e0 R6: 00331324 R7: 00000001 Oct 3 19:25:21.889861 (XEN) R8: 00331104 R9: 00000000 R10:40e00000 R11:4003ff54 R12:fffffffc Oct 3 19:25:21.901706 (XEN) HYP: SP: 4003ff44 LR: 00225b7c Oct 3 19:25:21.901808 (XEN) Oct 3 19:25:21.901877 (XEN) VTCR_EL2: 80003558 Oct 3 19:25:21.901919 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 19:25:21.913730 (XEN) Oct 3 19:25:21.913792 (XEN) SCTLR_EL2: 30cd187f Oct 3 19:25:21.913842 (XEN) HCR_EL2: 007c663f Oct 3 19:25:21.914034 (XEN) TTBR0_EL2: 000000004110e000 Oct 3 19:25:21.914089 (XEN) Oct 3 19:25:21.914153 (XEN) ESR_EL2: 07e00000 Oct 3 19:25:21.925746 (XEN) HPFAR_EL2: 00104810 Oct 3 19:25:21.925802 (XEN) HDFAR: e0807f00 Oct 3 19:25:21.925845 (XEN) HIFAR: 40008000 Oct 3 19:25:21.925886 (XEN) Oct 3 19:25:21.925924 (XEN) Xen stack trace from sp=4003ff44: Oct 3 19:25:21.937750 (XEN) 07e00000 00295014 002919b8 4003ff4c 002678fc 00000000 00000000 00000000 Oct 3 19:25:21.937814 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 19:25:21.949757 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 19:25:21.949819 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 19:25:21.961749 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 19:25:21.973747 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 19:25:21.973808 (XEN) Xen call trace: Oct 3 19:25:21.973851 (XEN) [<0025f53c>] domain.c#idle_loop+0x130/0x1ac (PC) Oct 3 19:25:21.985737 (XEN) [<00225b7c>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 19:25:21.985799 (XEN) [<002678fc>] arch_get_xen_caps+0/0x90 Oct 3 19:25:21.985845 (XEN) Oct 3 19:25:21.997757 (XEN) *** Dumping CPU1 host state: *** Oct 3 19:25:21.997815 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 19:25:21.997865 (XEN) CPU: 1 Oct 3 19:25:21.997905 (XEN) PC: 0025f53c domain.c#idle_loop+0x130/0x1ac Oct 3 19:25:22.009748 (XEN) CPSR: 6003005a MODE:Hypervisor Oct 3 19:25:22.009807 (XEN) R0: 00000000 R1: 00000001 R2: 3fd06000 R3: 00000000 Oct 3 19:25:22.021743 (XEN) R4: 00000001 R5: 003000e0 R6: 00331324 R7: 00000002 Oct 3 19:25:22.021804 (XEN) R8: 00331104 R9: 00000001 R10:40e00000 R11:4000ff54 R12:fffffffc Oct 3 19:25:22.033741 (XEN) HYP: SP: 4000ff44 LR: 00225b7c Oct 3 19:25:22.033799 (XEN) Oct 3 19:25:22.033839 (XEN) VTCR_EL2: 80003558 Oct 3 19:25:22.033881 (XEN) VTTBR_EL2: 00010000bef8e000 Oct 3 19:25:22.033923 (XEN) Oct 3 19:25:22.033961 (XEN) SCTLR_EL2: 30cd187f Oct 3 19:25:22.045767 (XEN) HCR_EL2: 007c663f Oct 3 19:25:22.045846 (XEN) TTBR0_EL2: 00000000ba004000 Oct 3 19:25:22.045917 (XEN) Oct 3 19:25:22.045978 (XEN) ESR_EL2: 07e00000 Oct 3 19:25:22.046045 (XEN) HPFAR_EL2: 00104810 Oct 3 19:25:22.057770 (XEN) HDFAR: e0807f00 Oct 3 19:25:22.057838 (XEN) HIFAR: c0a19dbc Oct 3 19:25:22.057929 (XEN) Oct 3 19:25:22.057973 (XEN) Xen stack trace from sp=4000ff44: Oct 3 19:25:22.058019 (XEN) 07e00000 00301290 00000001 4000ff3c 002681e0 00000000 00000000 00000000 Oct 3 19:25:22.069746 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 19:25:22.081741 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 19:25:22.081803 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 19:25:22.093759 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 19:25:22.093822 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 19:25:22.105755 (XEN) Xen call trace: Oct 3 19:25:22.105811 (XEN) [<0025f53c>] domain.c#idle_loop+0x130/0x1ac (PC) Oct 3 19:25:22.105861 (XEN) [<00225b7c>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 19:25:22.117780 (XEN) [<002681e0>] start_secondary+0x204/0x20c Oct 3 19:25:22.117840 (XEN) Oct 3 19:25:22.117880 Oct 3 19:25:23.821986 (XEN) 'e' pressed -> dumping event-channel info Oct 3 19:25:23.833725 (XEN) Event channel information for domai Oct 3 19:25:23.835045 n 0: Oct 3 19:25:23.845700 (XEN) Polling vCPUs: {} Oct 3 19:25:23.845700 (XEN) port [p/m/s] Oct 3 19:25:23.845700 (XEN) 1 [0/0/ - ]: s=3 n=1 x=0 d=0 p=4 Oct 3 19:25:23.845700 (XEN) 2 [0/0/ - ]: s=5 n=0 x=0 v=2 Oct 3 19:25:23.857877 (XEN) 3 [0/0/ - ]: s=5 n=1 x=0 v=3 Oct 3 19:25:23.857941 (XEN) 4 [0/0/ - ]: s=3 n=0 x=0 d=0 p=1 Oct 3 19:25:23.857967 (XEN) 5 [0/0/ - ]: s=3 n=1 x=0 d=0 p=6 Oct 3 19:25:23.869701 (XEN) 6 [0/0/ - ]: s=3 n=0 x=0 d=0 p=5 Oct 3 19:25:23.869768 Oct 3 19:25:25.853615 (XEN) gnttab_usage_print_all [ key 'g' pressed Oct 3 19:25:25.877762 (XEN) -------- active -------- -------- shared -------- Oct 3 19:25:25.877796 (XEN) [ref] localdo Oct 3 19:25:25.880203 m mfn pin localdom gmfn flags Oct 3 19:25:25.889731 (XEN) grant-table for remote d0 (v1) Oct 3 19:25:25.889789 (XEN) 2 frames (64 max), 2 maptrack frames (1024 max) Oct 3 19:25:25.901736 (XEN) [0x208] 0 0x6630a 0x00000001 0 0x06630a 0x19 Oct 3 19:25:25.901770 (XEN) [0x209] 0 0x66305 0x00000001 0 0x066305 0x19 Oct 3 19:25:25.901797 (XEN) gnttab_usage_print_all ] done Oct 3 19:25:25.913602 Oct 3 19:25:27.850510 Oct 3 19:25:29.620696 Oct 3 19:25:29.859679 (XEN) Physical memory information: Oct 3 19:25:29.881847 (XEN) Xen heap: 65104kB free Oct 3 19:25:29.881906 (XEN) heap[19]: 523340kB free Oct 3 19:25:29.881952 (XEN) heap[20]: 966424kB fr Oct 3 19:25:29.884130 ee Oct 3 19:25:29.893620 (XEN) Dom heap: 1489764kB free Oct 3 19:25:29.893657 Oct 3 19:25:31.856162 Oct 3 19:25:33.631090 Oct 3 19:25:33.867493 (XEN) sched_smt_power_savings: disabled Oct 3 19:25:33.885845 (XEN) NOW=1822020971875 Oct 3 19:25:33.885901 (XEN) Online Cpus: 0-1 Oct 3 19:25:33.885944 (XEN) Cpupool 0: Oct 3 19:25:33.885983 (XEN) Cpus: 0-1 Oct 3 19:25:33.886033 (XEN) Sched Oct 3 19:25:33.888252 uling granularity: cpu, 1 CPU per sched-resource Oct 3 19:25:33.897656 (XEN) Scheduler: SMP Credit Scheduler rev2 (credit2) Oct 3 19:25:33.897656 (XEN) Active queues: 1 Oct 3 19:25:33.897656 (XEN) default-weight = 256 Oct 3 19:25:33.909767 (XEN) Runqueue 0: Oct 3 19:25:33.909826 (XEN) ncpus = 2 Oct 3 19:25:33.909896 (XEN) cpus = 0-1 Oct 3 19:25:33.909942 (XEN) max_weight = 256 Oct 3 19:25:33.921751 (XEN) pick_bias = 0 Oct 3 19:25:33.921809 (XEN) instload = 0 Oct 3 19:25:33.921853 (XEN) aveload = 1789 (~0%) Oct 3 19:25:33.921897 (XEN) idlers: 2 Oct 3 19:25:33.921937 (XEN) tickled: 0 Oct 3 19:25:33.933659 (XEN) fully idle cores: 2 Oct 3 19:25:33.933659 (XEN) Domain info: Oct 3 19:25:33.933659 (XEN) Domain: 0 w 256 c 0 v 2 Oct 3 19:25:33.933659 (XEN) 1: [0.0] flags=0 cpu=1 credit=4671555 [w=256] load=1186 (~0%) Oct 3 19:25:33.945666 (XEN) 2: [0.1] flags=0 cpu=0 credit=7098460 [w=256] load=598 (~0%) Oct 3 19:25:33.945666 (XEN) Runqueue 0: Oct 3 19:25:33.945666 (XEN) CPU[00] runq=0, sibling={0}, core={0-1} Oct 3 19:25:33.957660 (XEN) CPU[01] runq=0, sibling={1}, core={0-1} Oct 3 19:25:33.957660 (XEN) RUNQ: Oct 3 19:25:33.957660 (XEN) CPUs info: Oct 3 19:25:33.957660 (XEN) CPU[00] current=d[IDLE]v0, curr=d[IDLE]v0, prev=NULL Oct 3 19:25:33.969636 (XEN) CPU[01] current=d[IDLE]v1, curr=d[IDLE]v1, prev=NULL Oct 3 19:25:33.969636 Oct 3 19:25:35.858635 Oct 3 19:25:37.642082 Oct 3 19:25:37.861810 (XEN) Synced stime skew: max=166ns avg=166ns samples=1 current=166ns Oct 3 19:25:37.877731 (XEN) Synced cycles skew: max=2 avg=2 samples=1 current=2 Oct 3 19:25:37.877766 Oct 3 19:25:37.879537 Oct 3 19:25:39.890336 Oct 3 19:25:41.652294 Oct 3 19:25:41.861297 Oct 3 19:25:43.659903 Oct 3 19:25:43.900770 Oct 3 19:25:45.667233 Oct 3 19:25:55.935011 (XEN) 'q' pressed -> dumping domain info (now = 1844089175583) Oct 3 19:25:55.953879 (XEN) General information for domain 0: Oct 3 19:25:55.953955 (XEN) refcnt=3 dying=0 paus Oct 3 19:25:55.956062 e_count=0 Oct 3 19:25:55.965625 (XEN) nr_pages=131072 xenheap_pages=3 dirty_cpus={} max_pages=131072 Oct 3 19:25:55.965664 (XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=00000020 Oct 3 19:25:55.977798 (XEN) p2m mappings for domain 0 (vmid 1): Oct 3 19:25:55.977858 (XEN) 1G mappings: 0 (shattered 0) Oct 3 19:25:55.977905 (XEN) 2M mappings: 234 (shattered 22) Oct 3 19:25:55.989816 (XEN) 4K mappings: 6298 Oct 3 19:25:55.989873 (XEN) Rangesets belonging to domain 0: Oct 3 19:25:55.989920 (XEN) Interrupts { 32-72, 74, 77-79, 82-84, 86, 88-100, 103-104, 107-110, 114, 116-120, 123, 126-128, 138, 144, 146-147, 149-151, 156 } Oct 3 19:25:56.001766 (XEN) I/O Memory { 2020-2050, 3810-3811, 3830-3831, 3860-3861, 10000-10001, 10010-10045, 10050-10055, 10060-10061, 101b0-101b1, 101d0-101d1, 101e0-101e1, 10440-10441, 10800-10801, 10830-10831, 10850-10851, 10a60-10a61, 10d10-10d11, 11000-11010, 11200-11201, 11210-11211, 11400-11401, 11800-11805, 11c00-11c01, 11c10-11c11, 11d40-11d41, 11f20-11f21, 12000-12010, 12100-12101, 12110-12111, 12120-12121, 12130-12131, 12170-12171, 121a0-121a1, 121b0-121b1, 121d0-121d1, 12200-12201, 12210-12211, 12220-12221, 12230-12231, 12250-12251, 122f0-122f1, 12c00-12c01, 12c10-12c11, 12c30-12c31, 12c60-12c61, 12c70-12c71, 12c80-12c81, 12c90-12c91, 12ca0-12ca1, 12cb0-12cb1, 12cc0-12cc1, 12cd0-12cd1, 12ce0-12ce1, 12d10-12d11, 12d20-12d21, 12d30-12d31, 12d40-12d41, 12d60-12d61, 12d70-12d71, 12dd0-12dd1, 13260-13261, 13270-13271, 13280-13281, 13290-13291, 132a0-132a1, 132b0-132b1, 132c0-132c1, 132d0-132d1, 132e0-132e1, 132f0-132f1, 13400-13401, 13c40-13c41, 13c50-13c51, 13e00-13e01, 13e10-13e11, 13e20-13e21, 13e30-13e31, 13e80-13e81, 13e90-13e91, 13ea0-13ea1, 13eb0-13eb1, 14400-14440, 14450-14460, 14500-14510, 14530-145a0, 145b0-145b1, 14640-14641, 14650-14651 } Oct 3 19:25:56.097794 (XEN) NODE affinity for domain 0: [0] Oct 3 19:25:56.109739 (XEN) VCPU information and callbacks for domain 0: Oct 3 19:25:56.109799 (XEN) UNIT0 affinities: hard={0-1} soft={0-1} Oct 3 19:25:56.109847 (XEN) VCPU0: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 19:25:56.121753 (XEN) pause_count=0 pause_flags=1 Oct 3 19:25:56.121811 (XEN) GICH_LRs (vcpu 0) mask=0 Oct 3 19:25:56.121854 (XEN) VCPU_LR[0]=0 Oct 3 19:25:56.133786 (XEN) VCPU_LR[1]=0 Oct 3 19:25:56.133842 (XEN) VCPU_LR[2]=0 Oct 3 19:25:56.133883 (XEN) VCPU_LR[3]=0 Oct 3 19:25:56.133924 (XEN) No periodic timer Oct 3 19:25:56.133965 (XEN) UNIT1 affinities: hard={0-1} soft={0-1} Oct 3 19:25:56.145739 (XEN) VCPU1: CPU0 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 19:25:56.145802 (XEN) pause_count=0 pause_flags=1 Oct 3 19:25:56.145847 (XEN) GICH_LRs (vcpu 1) mask=0 Oct 3 19:25:56.157742 (XEN) VCPU_LR[0]=0 Oct 3 19:25:56.157797 (XEN) VCPU_LR[1]=0 Oct 3 19:25:56.157839 (XEN) VCPU_LR[2]=0 Oct 3 19:25:56.157880 (XEN) VCPU_LR[3]=0 Oct 3 19:25:56.157920 (XEN) No periodic timer Oct 3 19:25:56.169710 (XEN) Notifying guest 0:0 (virq 1, port 0) Oct 3 19:25:56.169770 (XEN) Notifying guest 0:1 (virq 1, port 0) Oct 3 19:25:56.169816 Oct 3 19:26:07.891588 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 19:26:07.917883 Oct 3 19:26:07.917926 arndale-westfield login: Oct 3 19:26:07.918910 [ 1946.124595] vif vif-1: 5 starting transaction Oct 3 19:27:43.273830 [ 1946.127595] vif vif-1: 5 starting transaction Oct 3 19:27:43.285713 [ 1951.207935] xenbus_probe_frontend: xenbus_frontend_dev_shutdown: device/vif/1 timeout closing device Oct 3 19:27:48.365145 [ 1951.215862] sd 0:0:0:0: [sda] Synchronizing SCSI cache Oct 3 19:27:48.365978 [ 1951.226796] wake enabled for irq 119 (gpx1-4) Oct 3 19:27:48.376879 [ 1951.229837] wake enabled for irq 120 (gpx1-5) Oct 3 19:27:48.388912 [ 1951.234209] wake enabled for irq 121 (gpx1-6) Oct 3 19:27:48.388912 [ 1951.238655] wake enabled for irq 122 (gpx1-7) Oct 3 19:27:48.388912 [ 1951.243063] wake enabled for irq 123 (gpx2-0) Oct 3 19:27:48.400882 [ 1951.247490] wake enabled for irq 124 (gpx2-1) Oct 3 19:27:48.400882 [ 1951.252448] reboot: Resô Oct 3 19:27:48.741121 Oct 3 19:27:48.741163 Oct 3 19:27:48.741288 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 19:27:48.741346 Oct 3 19:27:48.741385 CPU: Exynos5250@1000MHz Oct 3 19:27:48.741428 Oct 3 19:27:48.741466 Board: Arndale Oct 3 19:27:48.752899 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 19:27:48.752899 ready Oct 3 19:27:48.752899 DRAM: 2 GiB Oct 3 19:27:48.752899 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 19:27:48.776851 trace: enabled Oct 3 19:27:48.812814 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 19:27:49.172855 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 19:27:49.232903 In: serial Oct 3 19:27:49.232903 Out: serial Oct 3 19:27:49.232903 Err: serial Oct 3 19:27:49.232903 SCSI: ARNDALE SCSI INIT Oct 3 19:27:49.232903 Target spinup took 0 ms. Oct 3 19:27:49.245036 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 19:27:49.245036 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 19:27:49.245036 Net: Net Initialization Skipped Oct 3 19:27:49.256907 No ethernet found. Oct 3 19:27:49.256907 Hostname: arndale-westfield Oct 3 19:27:49.256907 Hit any key to stop autoboot: 2  1  0 Oct 3 19:27:51.180787 (Re)start USB... Oct 3 19:27:51.180787 USB0: USB EHCI 1.00 Oct 3 19:27:51.180787 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 19:27:56.785759 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 19:27:56.785855 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 19:27:57.229676 Waiting for Ethernet connection... done. Oct 3 19:27:58.873695 BOOTP broadcast 1 Oct 3 19:27:58.873758 BOOTP broadcast 2 Oct 3 19:27:59.725783 DHCP client bound to address 10.149.64.45 (886 ms) Oct 3 19:27:59.790604 Using asx0 device Oct 3 19:27:59.790699 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 19:27:59.790724 Filename 'pxelinux.0'. Oct 3 19:27:59.790755 Load address: 0x43e00000 Oct 3 19:27:59.790796 Loading: *### Oct 3 19:27:59.790895 2.4 MiB/s Oct 3 19:27:59.790937 done Oct 3 19:27:59.790976 Bytes transferred = 42430 (a5be hex) Oct 3 19:27:59.791019 missing environment variable: pxeuuid Oct 3 19:27:59.791056 Retrieving file: pxelinux.cfg/0A95402D Oct 3 19:27:59.791080 Using asx0 device Oct 3 19:27:59.791102 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 19:27:59.791127 Filename 'pxelinux.cfg/0A95402D'. Oct 3 19:27:59.791150 Load address: 0x51000000 Oct 3 19:27:59.791172 Loading: *# Oct 3 19:27:59.791193 355.5 KiB/s Oct 3 19:27:59.791214 done Oct 3 19:27:59.791235 Bytes transferred = 728 (2d8 hex) Oct 3 19:27:59.791258 Config file found Oct 3 19:27:59.797751 Ignoring unknown command: serial Oct 3 19:27:59.797809 1: ^Overwrite Oct 3 19:27:59.797851 Retrieving file: /osstest/tmp//arndale-westfield--initrd.gz Oct 3 19:27:59.797899 Using asx0 device Oct 3 19:27:59.809748 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 19:27:59.809811 Filename '/osstest/tmp//arndale-westfield--initrd.gz'. Oct 3 19:27:59.809859 Load address: 0x43300000 Oct 3 19:27:59.821730 Loading: *################################################################# Oct 3 19:28:00.145688 ################################################################# Oct 3 19:28:00.457650 ################################################################# Oct 3 19:28:00.769690 ################################################################# Oct 3 19:28:01.093682 ################################################################# Oct 3 19:28:01.421703 ################################################################# Oct 3 19:28:01.745676 ################################################################# Oct 3 19:28:02.069708 ################################################################# Oct 3 19:28:02.381685 ################################################################# Oct 3 19:28:02.705704 ################################################################# Oct 3 19:28:03.029753 ################################################################# Oct 3 19:28:03.353685 ################################################################# Oct 3 19:28:03.677593 ################################################################# Oct 3 19:28:04.001681 ################################################################# Oct 3 19:28:04.325682 ################################################################# Oct 3 19:28:04.649683 ################################################################# Oct 3 19:28:04.973706 ################################################################# Oct 3 19:28:05.297679 ################################################################# Oct 3 19:28:05.621673 ################################################################# Oct 3 19:28:05.945719 ################################################################# Oct 3 19:28:06.269882 ################################################################# Oct 3 19:28:06.593774 ################################################################# Oct 3 19:28:06.917801 ################################################################# Oct 3 19:28:07.241688 ################################################################# Oct 3 19:28:07.565601 ################################################################# Oct 3 19:28:07.901636 ################################################################# Oct 3 19:28:08.225643 ################################################################# Oct 3 19:28:08.549560 ######################################## Oct 3 19:28:08.741590 2.7 MiB/s Oct 3 19:28:08.741590 done Oct 3 19:28:08.741590 Bytes transferred = 26339181 (191e76d hex) Oct 3 19:28:08.753598 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/linux Oct 3 19:28:08.765639 Using asx0 device Oct 3 19:28:08.765639 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 19:28:08.765639 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/linux'. Oct 3 19:28:08.777594 Load address: 0x42000000 Oct 3 19:28:08.777594 Loading: *################################################################# Oct 3 19:28:09.065651 ################################################################# Oct 3 19:28:09.341566 ################################################################# Oct 3 19:28:09.617643 ################################################################# Oct 3 19:28:09.893604 ################################################################# Oct 3 19:28:10.169611 ############################################# Oct 3 19:28:10.373682 3.1 MiB/s Oct 3 19:28:10.374235 done Oct 3 19:28:10.374273 Bytes transferred = 5427712 (52d200 hex) Oct 3 19:28:10.374300 append: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=57044 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 19:28:10.413666 Retrieving file: /osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb Oct 3 19:28:10.425685 Using asx0 device Oct 3 19:28:10.425715 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 19:28:10.425742 Filename '/osstest/debian-installer/armhf/2024-09-02-bookworm/dtbs/exynos5250-arndale.dtb'. Oct 3 19:28:10.437646 Load address: 0x43000000 Oct 3 19:28:10.437676 Loading: *#### Oct 3 19:28:10.461622 2.3 MiB/s Oct 3 19:28:10.461652 done Oct 3 19:28:10.461674 Bytes transferred = 46686 (b65e hex) Oct 3 19:28:10.461698 Kernel image @ 0x42000000 [ 0x000000 - 0x52d200 ] Oct 3 19:28:10.473681 ## Flattened Device Tree blob at 43000000 Oct 3 19:28:10.473714 Booting using the fdt blob at 0x43000000 Oct 3 19:28:10.473739 Loading Ramdisk to 4e6e1000, end 4ffff76d ... OK Oct 3 19:28:10.905655 Loading Device Tree to 4e6d2000, end 4e6e065d ... OK Oct 3 19:28:10.905694 Oct 3 19:28:10.917634 Starting kernel ...(fake run for tracing) Oct 3 19:28:10.917667 Oct 3 19:28:10.917689 Oct 3 19:28:10.917709 Starting kernel ... Oct 3 19:28:10.917736 Oct 3 19:28:10.917767 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 19:28:16.981702 [ 0.000000] Linux version 6.1.0-25-armmp (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.106-3 (2024-08-26) Oct 3 19:28:16.993686 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 19:28:16.993721 [ 0.000000] CPU: div instructions available: patching division code Oct 3 19:28:17.005694 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 19:28:17.017636 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 19:28:17.017675 [ 0.000000] Memory policy: Data cache writealloc Oct 3 19:28:17.029659 [ 0.000000] efi: UEFI not found. Oct 3 19:28:17.029688 [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 Oct 3 19:28:17.029713 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 19:28:17.041636 [ 0.000000] Zone ranges: Oct 3 19:28:17.041667 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 19:28:17.041720 [ 0.000000] Normal empty Oct 3 19:28:17.053680 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 19:28:17.053714 [ 0.000000] Movable zone start for each node Oct 3 19:28:17.053740 [ 0.000000] Early memory node ranges Oct 3 19:28:17.065633 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 19:28:17.065671 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 19:28:17.077630 [ 0.000000] percpu: Embedded 18 pages/cpu s44692 r8192 d20844 u73728 Oct 3 19:28:17.077662 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 19:28:17.093658 [ 0.000000] Kernel command line: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-westfield url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=57044 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-westfield--initrd.gz --- console=ttySAC2,115200n8 Oct 3 19:28:17.137628 [ 0.000000] Unknown kernel command line parameters "preseed --- vga=normal auto=true hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-westfield_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=57044 domain=test-lab.xenproject.org", will be passed to user space. Oct 3 19:28:17.173662 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 19:28:17.173696 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 19:28:17.185638 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 19:28:17.197663 [ 0.000000] Memory: 2015968K/2097152K available (11264K kernel code, 1696K rwdata, 3724K rodata, 2048K init, 376K bss, 64800K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 19:28:17.209631 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 19:28:17.209662 [ 0.000000] ftrace: allocating 39612 entries in 117 pages Oct 3 19:28:17.221654 [ 0.000000] ftrace: allocated 117 pages with 5 groups Oct 3 19:28:17.221684 [ 0.000000] trace event string verifier disabled Oct 3 19:28:17.233715 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 19:28:17.233745 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 19:28:17.245696 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 19:28:17.245725 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 19:28:17.245751 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 19:28:17.257661 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 19:28:17.269662 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 19:28:17.269692 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 19:28:17.269718 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 19:28:17.281661 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 19:28:17.281692 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 19:28:17.293679 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 19:28:17.305635 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 19:28:17.305669 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 19:28:17.317632 [ 0.002614] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 19:28:17.329625 [ 0.002628] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 19:28:17.329679 [ 0.002643] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 19:28:17.341639 [ 0.002654] Ignoring duplicate/late registration of read_current_timer delay Oct 3 19:28:17.353639 [ 0.003012] Console: colour dummy device 80x30 Oct 3 19:28:17.353668 [ 0.003051] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 19:28:17.365628 [ 0.003064] CPU: Testing write buffer coherency: ok Oct 3 19:28:17.365657 [ 0.003107] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 19:28:17.377632 [ 0.003115] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 19:28:17.389635 [ 0.003122] pid_max: default: 32768 minimum: 301 Oct 3 19:28:17.389664 [ 0.003485] LSM: Security Framework initializing Oct 3 19:28:17.389689 [ 0.003558] landlock: Up and running. Oct 3 19:28:17.401628 [ 0.003562] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 19:28:17.401660 [ 0.003748] AppArmor: AppArmor initialized Oct 3 19:28:17.413629 [ 0.003760] TOMOYO Linux initialized Oct 3 19:28:17.413657 [ 0.003806] LSM support for eBPF active Oct 3 19:28:17.413682 [ 0.004052] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 19:28:17.425626 [ 0.004066] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 19:28:17.425659 [ 0.005501] /cpus/cpu@0 missing clock-frequency property Oct 3 19:28:17.437627 [ 0.005529] /cpus/cpu@1 missing clock-frequency property Oct 3 19:28:17.437657 [ 0.005542] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 19:28:17.449676 [ 0.006499] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 19:28:17.449719 [ 0.006507] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 19:28:17.461675 [ 0.006609] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 19:28:17.473650 [ 0.006615] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 19:28:17.473681 [ 0.006760] Setting up static identity map for 0x40300000 - 0x403000ac Oct 3 19:28:17.485619 [ 0.007918] rcu: Hierarchical SRCU implementation. Oct 3 19:28:17.485649 [ 0.007924] rcu: Max phase no-delay instances is 1000. Oct 3 19:28:17.485676 [ 0.010047] EFI services will not be available. Oct 3 19:28:17.497633 [ 0.010395] smp: Bringing up secondary CPUs ... Oct 3 19:28:17.497665 [ 0.011142] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 19:28:17.509625 [ 0.011154] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 19:28:17.509661 [ 0.011297] smp: Brought up 1 node, 2 CPUs Oct 3 19:28:17.521629 [ 0.011306] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 19:28:17.521663 [ 0.011314] CPU: All CPU(s) started in HYP mode. Oct 3 19:28:17.533621 [ 0.011318] CPU: Virtualization extensions available. Oct 3 19:28:17.533652 [ 0.011939] devtmpfs: initialized Oct 3 19:28:17.533678 [ 0.023304] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 19:28:17.545632 [ 0.023538] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 19:28:17.557639 [ 0.023564] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 19:28:17.557669 [ 0.024088] pinctrl core: initialized pinctrl subsystem Oct 3 19:28:17.569628 [ 0.024786] DMI not present or invalid. Oct 3 19:28:17.569656 [ 0.025461] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 19:28:17.581627 [ 0.030886] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 19:28:17.581662 [ 0.032427] audit: initializing netlink subsys (disabled) Oct 3 19:28:17.593617 [ 0.032630] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 Oct 3 19:28:17.593665 [ 0.033785] thermal_sys: Registered thermal governor 'fair_share' Oct 3 19:28:17.605628 [ 0.033792] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 19:28:17.605658 [ 0.033797] thermal_sys: Registered thermal governor 'step_wise' Oct 3 19:28:17.617628 [ 0.033802] thermal_sys: Registered thermal governor 'user_space' Oct 3 19:28:17.617658 [ 0.033806] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 19:28:17.629623 [ 0.034184] No ATAGs? Oct 3 19:28:17.629649 [ 0.034253] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 19:28:17.641684 [ 0.034261] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 19:28:17.641718 [ 0.035343] Serial: AMBA PL011 UART driver Oct 3 19:28:17.641743 [ 0.084778] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 19:28:17.653679 [ 0.091788] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 19:28:17.665678 [ 0.102803] iommu: Default domain type: Translated Oct 3 19:28:17.665714 [ 0.102812] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 19:28:17.677650 [ 0.103773] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 19:28:17.677686 [ 0.104313] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 19:28:17.689658 [ 0.104324] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 19:28:17.689689 [ 0.104859] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 19:28:17.701627 [ 0.104890] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 19:28:17.713631 [ 0.105073] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 19:28:17.713661 [ 0.105426] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 19:28:17.725617 [ 0.105436] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 19:28:17.725648 [ 0.105832] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 19:28:17.725675 [ 0.106118] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 19:28:17.737627 [ 0.106128] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 19:28:17.737657 [ 0.106406] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 19:28:17.749627 [ 0.106509] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 19:28:17.749657 [ 0.106518] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 19:28:17.761619 [ 0.106719] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 19:28:17.761649 [ 0.106912] pps_core: LinuxPPS API ver. 1 registered Oct 3 19:28:17.773622 [ 0.106918] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 19:28:17.773658 [ 0.106933] PTP clock support registered Oct 3 19:28:17.785653 [ 0.108562] NetLabel: Initializing Oct 3 19:28:17.785681 [ 0.108569] NetLabel: domain hash size = 128 Oct 3 19:28:17.785707 [ 0.108574] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 19:28:17.797619 [ 0.108628] NetLabel: unlabeled traffic allowed by default Oct 3 19:28:17.797650 [ 0.108811] vgaarb: loaded Oct 3 19:28:17.797675 [ 0.109475] clocksource: Switched to clocksource mct-frc Oct 3 19:28:17.809632 [ 0.110106] VFS: Disk quotas dquot_6.6.0 Oct 3 19:28:17.809662 [ 0.110194] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 19:28:17.821626 [ 0.110936] AppArmor: AppArmor Filesystem Enabled Oct 3 19:28:17.821656 [ 0.120970] NET: Registered PF_INET protocol family Oct 3 19:28:17.833656 [ 0.121202] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 19:28:17.833690 [ 0.122822] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 19:28:17.845623 [ 0.122925] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 19:28:17.845657 [ 0.122951] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 19:28:17.857706 [ 0.123051] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 19:28:17.869737 [ 0.123281] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 19:28:17.869772 [ 0.123509] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 19:28:17.881643 [ 0.123601] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 19:28:17.881679 [ 0.123641] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 19:28:17.893631 [ 0.123839] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 19:28:17.893662 [ 0.123875] NET: Registered PF_XDP protocol family Oct 3 19:28:17.905662 [ 0.123885] PCI: CLS 0 bytes, default 64 Oct 3 19:28:17.905690 [ 0.125000] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 19:28:17.917679 [ 0.125258] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 19:28:17.929675 [ 0.129838] Trying to unpack rootfs image as initramfs... Oct 3 19:28:17.929710 [ 0.183723] Initialise system trusted keyrings Oct 3 19:28:17.929736 [ 0.183802] Key type blacklist registered Oct 3 19:28:17.941625 [ 0.184268] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 19:28:17.941656 [ 0.191421] zbud: loaded Oct 3 19:28:17.941680 [ 0.194449] integrity: Platform Keyring initialized Oct 3 19:28:17.953681 [ 0.194506] integrity: Machine keyring initialized Oct 3 19:28:17.953716 [ 0.194514] Key type asymmetric registered Oct 3 19:28:17.965683 [ 0.194520] Asymmetric key parser 'x509' registered Oct 3 19:28:17.965716 [ 1.505662] Freeing initrd memory: 25724K Oct 3 19:28:17.965742 [ 1.517086] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 19:28:17.977692 [ 1.517397] bounce: pool size: 64 pages Oct 3 19:28:17.977724 [ 1.517618] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 19:28:17.989708 [ 1.517772] io scheduler mq-deadline registered Oct 3 19:28:17.989740 [ 1.522856] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 19:28:18.001689 [ 1.543391] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 19:28:18.001731 [ 1.543403] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 19:28:18.013708 [ 1.545683] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 19:28:18.025687 [ 1.545694] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 19:28:18.037671 [ 1.546558] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 19:28:18.037709 [ 1.546567] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 19:28:18.049690 [ 1.547379] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 19:28:18.061662 [ 1.547388] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 19:28:18.061702 [ 1.549719] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 19:28:18.073691 [ 1.552564] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 19:28:18.085653 [ 1.555353] Serial: AMBA driver Oct 3 19:28:18.085681 [ 1.555576] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 19:28:18.097656 [ 1.556057] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 19:28:18.097694 [ 1.556546] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 19:28:18.109731 [ 2.694651] printk: console [ttySAC2] enabled Oct 3 19:28:18.109763 [ 2.699530] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 19:28:18.121711 [ 2.710132] STM32 USART driver initialized Oct 3 19:28:18.133642 [ 2.724302] mousedev: PS/2 mouse device common for all mice Oct 3 19:28:18.145693 [ 2.755596] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 19:28:18.169652 [ 2.764225] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T19:28:20 UTC (1727983700) Oct 3 19:28:18.181664 [ 2.774047] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 19:28:18.193691 [ 2.781455] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 19:28:18.205658 [ 2.789461] NET: Registered PF_INET6 protocol family Oct 3 19:28:18.205692 [ 2.803179] Segment Routing with IPv6 Oct 3 19:28:18.217645 [ 2.805423] In-situ OAM (IOAM) with IPv6 Oct 3 19:28:18.229681 [ 2.809383] mip6: Mobile IPv6 Oct 3 19:28:18.229712 [ 2.812260] NET: Registered PF_PACKET protocol family Oct 3 19:28:18.229739 [ 2.817390] mpls_gso: MPLS GSO support Oct 3 19:28:18.241692 [ 2.821666] ThumbEE CPU extension supported. Oct 3 19:28:18.241725 [ 2.825256] Registering SWP/SWPB emulation handler Oct 3 19:28:18.241751 [ 2.830544] registered taskstats version 1 Oct 3 19:28:18.253661 [ 2.834148] Loading compiled-in X.509 certificates Oct 3 19:28:18.253694 [ 3.294694] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 19:28:18.721719 [ 3.302027] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 19:28:18.733676 [ 3.313040] zswap: loaded using pool lzo/zbud Oct 3 19:28:18.733710 [ 3.317042] Key type .fscrypt registered Oct 3 19:28:18.733735 [ 3.320356] Key type fscrypt-provisioning registered Oct 3 19:28:18.745633 [ 3.334052] Key type encrypted registered Oct 3 19:28:18.757657 [ 3.336595] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 19:28:18.757688 [ 3.342110] ima: No TPM chip found, activating TPM-bypass! Oct 3 19:28:18.769709 [ 3.347611] ima: Allocated hash algorithm: sha256 Oct 3 19:28:18.769743 [ 3.352256] ima: No architecture policies found Oct 3 19:28:18.769772 [ 3.356791] evm: Initialising EVM extended attributes: Oct 3 19:28:18.781664 [ 3.361861] evm: security.selinux Oct 3 19:28:18.781692 [ 3.365143] evm: security.SMACK64 (disabled) Oct 3 19:28:18.781717 [ 3.369409] evm: security.SMACK64EXEC (disabled) Oct 3 19:28:18.793667 [ 3.374010] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 19:28:18.793697 [ 3.379049] evm: security.SMACK64MMAP (disabled) Oct 3 19:28:18.805700 [ 3.383646] evm: security.apparmor Oct 3 19:28:18.805732 [ 3.387030] evm: security.ima Oct 3 19:28:18.805756 [ 3.389982] evm: security.capability Oct 3 19:28:18.805781 [ 3.393547] evm: HMAC attrs: 0x1 Oct 3 19:28:18.817623 [ 3.981639] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 19:28:19.405602 [ 3.987602] clk: Disabling unused clocks Oct 3 19:28:19.405602 [ 4.001316] Freeing unused kernel image (initmem) memory: 2048K Oct 3 19:28:19.417614 [ 4.006182] Checked W+X mappings: passed, no W+X pages found Oct 3 19:28:19.429614 [ 4.011461] Run /init as init process Oct 3 19:28:19.429614 [ 4.542278] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 19:28:19.961609 [ 4.614786] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 19:28:20.033613 [ 4.629344] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 19:28:20.057567 [ 4.652600] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 19:28:20.081606 [ 4.664013] usbcore: registered new interface driver usbfs Oct 3 19:28:20.081606 [ 4.677166] usbcore: registered new interface driver hub Oct 3 19:28:20.093588 [ 4.701622] usbcore: registered new device driver usb Oct 3 19:28:20.117590 [ 4.712207] phy phy-12130000.phy.1: phy_power_on was called before phy_init Oct 3 19:28:20.129729 [ 4.723190] phy phy-12130000.phy.1: phy_power_on was called before phy_init Oct 3 19:28:20.141630 [ 4.728713] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 19:28:20.153575 [ 4.755984] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 19:28:20.177588 [ 4.771193] exynos-ohci 12120000.usb: USB Host Controller Oct 3 19:28:20.189632 [ 4.774140] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Oct 3 19:28:20.201649 [ 4.775229] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Oct 3 19:28:20.201649 [ 4.790995] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Oct 3 19:28:20.213604 [ 4.845170] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 19:28:20.261594 [ 4.855339] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 19:28:20.273620 [ 4.862230] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 19:28:20.285638 [ 4.869408] usb usb1: Product: EHCI Host Controller Oct 3 19:28:20.285638 [ 4.874256] usb usb1: Manufacturer: Linux 6.1.0-25-armmp ehci_hcd Oct 3 19:28:20.297792 [ 4.880331] usb usb1: SerialNumber: 12110000.usb Oct 3 19:28:20.297805 [ 4.884952] usb3503 usb-hub: switched to HUB mode Oct 3 19:28:20.309742 [ 4.889626] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 19:28:20.309742 [ 4.895578] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Oct 3 19:28:20.321602 [ 4.902378] hub 1-0:1.0: USB hub found Oct 3 19:28:20.321602 [ 4.911390] hub 1-0:1.0: 3 ports detected Oct 3 19:28:20.333582 [ 4.966189] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 19:28:20.393639 [ 4.973063] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 19:28:20.393639 [ 4.980239] usb usb2: Product: USB Host Controller Oct 3 19:28:20.405637 [ 4.984995] usb usb2: Manufacturer: Linux 6.1.0-25-armmp ohci_hcd Oct 3 19:28:20.405637 [ 4.991085] usb usb2: SerialNumber: 12120000.usb Oct 3 19:28:20.417611 [ 4.996582] hub 2-0:1.0: USB hub found Oct 3 19:28:20.417611 [ 4.999455] hub 2-0:1.0: 3 ports detected Oct 3 19:28:20.417611 [ 5.199350] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 19:28:20.621724 [ 5.203445] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 19:28:20.621835 [ 5.211584] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 19:28:20.633700 [ 5.220472] xhci-hcd xhci-hcd.2.auto: irq 108, io mem 0x12000000 Oct 3 19:28:20.645720 [ 5.226635] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 19:28:20.645761 [ 5.229543] usb 1-3: new high-speed USB device number 2 using exynos-ehci Oct 3 19:28:20.657714 [ 5.231873] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 19:28:20.657751 [ 5.246274] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 19:28:20.669708 [ 5.252947] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 19:28:20.681722 [ 5.261030] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 19:28:20.681759 [ 5.268231] usb usb3: Product: xHCI Host Controller Oct 3 19:28:20.693707 [ 5.273094] usb usb3: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 19:28:20.693742 [ 5.279164] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 19:28:20.705717 [ 5.284665] hub 3-0:1.0: USB hub found Oct 3 19:28:20.705749 [ 5.287796] hub 3-0:1.0: 1 port detected Oct 3 19:28:20.705774 [ 5.292169] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 19:28:20.717724 [ 5.299868] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 19:28:20.729705 [ 5.307981] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 19:28:20.729743 [ 5.315194] usb usb4: Product: xHCI Host Controller Oct 3 19:28:20.741716 [ 5.320050] usb usb4: Manufacturer: Linux 6.1.0-25-armmp xhci-hcd Oct 3 19:28:20.741751 [ 5.326125] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 19:28:20.741776 [ 5.331658] hub 4-0:1.0: USB hub found Oct 3 19:28:20.753700 [ 5.334751] hub 4-0:1.0: 1 port detected Oct 3 19:28:20.753733 [ 5.394602] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Oct 3 19:28:20.813682 [ 5.401341] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 3 19:28:20.833452 [ 5.410515] hub 1-3:1.0: USB hub found Oct 3 19:28:20.833498 [ 5.412976] hub 1-3:1.0: 3 ports detected Oct 3 19:28:20.837622 Starting system log daemon: syslogd, klogd. Oct 3 19:28:20.969614 /var/run/utmp: No such file or directory Oct 3 19:28:22.817627 [?1h=(B   Oct 3 19:28:22.865687  Oct 3 19:28:22.865713 [  (-*) ][ Oct 03 19:28 ] Oct 3 19:28:22.877690 [  (0*start) ][ Oct 03 19:28 ] Oct 3 19:28:22.889674 [  (0*start) ][ Oct 03 19:28 ] Oct 3 19:28:22.901680 [  (0*start) ][ Oct 03 19:28 ] Oct 3 19:28:22.925673 [  (0*start) ][ Oct 03 19:28 ]                        [  (0*start) ][ Oct 03 19:28 ][  (0*start) ][ Oct 03 19:28 ] Oct 3 19:28:22.973682 [ 0- start  (2*shell) ][ Oct 03 19:28 ] Oct 3 19:28:22.985687 [ 0- start  (2*shell) ][ Oct 03 19:28 ] Oct 3 19:28:23.009676 [ 0- start  (2*shell) ][ Oct 03 19:28 ] Oct 3 19:28:23.021672 [ 0- start  (2*shell) ][ Oct 03 19:28 ]                        [ 0- start  (2*shell) ][ Oct 03 19:28 ][ 0- start  (2*shell) ][ Oct 03 19:28 ] Oct 3 19:28:23.069717 [ 0 start 2- shell  (3*shell) ][ Oct 03 19:28 ] Oct 3 19:28:23.093715 [ 0 start 2- shell  (3*shell) ][ Oct 03 19:28 ] Oct 3 19:28:23.105674 [ 0 start 2- shell  (3*shell) ][ Oct 03 19:28 ] Oct 3 19:28:23.117682 [ 0 start 2- shell  (3*shell) ][ Oct 03 19:28 ]                        [ 0 start 2- shell  (3*shell) ][ Oct 03 19:28 ][ 0 start 2- shell  (3*shell) ][ Oct 03 19:28 ] Oct 3 19:28:23.177767 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 19:28 ] Oct 3 19:28:23.189766 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 19:28 ] Oct 3 19:28:23.201681 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 19:28 ] Oct 3 19:28:23.213682 [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 19:28 ]                        [ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 19:28 ][ 0 start 2 shell 3- shell  (4*log) ][ Oct 03 19:28 ] Oct 3 19:28:23.273671 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 19:28 ] Oct 3 19:28:23.285677 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 19:28 ] Oct 3 19:28:23.297668 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 19:28 ] Oct 3 19:28:23.309744 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 19:28 ]                        [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 19:28 ][ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Oct 03 19:28 ] Oct 3 19:28:23.369678 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 19:28 ] Oct 3 19:28:23.381638 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 19:28 ] Oct 3 19:28:23.393642 [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 19:28 ] Oct 3 19:28:23.849607 Detecting network hardware ... 2%... 95%... 100% Oct 3 19:28:25.577608 Detecting link on eth0; please wait... ... 0%... 10%... 20% Oct 3 19:28:30.461687 Waiting for link-local address... ... 8%... 16%... 25%... 33%... 100% Oct 3 19:28:31.497692 Attempting IPv6 autoconfiguration... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 75%... 83%... 91%... 100% Oct 3 19:28:37.557755 Configuring the network with DHCP ... 0%... 100% Oct 3 19:28:40.725731 Checking the Debian archive mirror ... 25%... 50%... 75%... 100% Oct 3 19:28:48.789811 Loading additional components ... 0%... 10%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 19:29 ]... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Oct 3 19:29:22.205709 Setting up the clock ... 0%... 100% Oct 3 19:29:24.981750 Loading additional components ... 50%... 100% Oct 3 19:29:26.649723 Detecting disks and all other hardware ... 2%... 95%... 100% Oct 3 19:29:31.285771 Loading additional components ... 12%... 25%... 37%... 50%... 62%... 75%... 87%... 100% Oct 3 19:29:38.177725 Loading additional components ... 25%... 50%... 75%... 100% Oct 3 19:29:40.545788 Starting up the partitioner ... 4%... 13%... 21%... 30%... 43%... 52%... 60%... 73%... 82%... 91%... 100% Oct 3 19:29:53.688943 [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 19:30 ] Guided partitioning ... 16%... 33%... 50%... 66%... 83%... 100% Oct 3 19:30:02.097706 Starting up the partitioner ... 4%... 12%... 20%... 32%... 40%... 52%... 60%... 72%... 80%... 92%... 100% Oct 3 19:30:13.005695 Partitions formatting ... 33% Oct 3 19:30:21.813593 Partitions formatting Oct 3 19:30:30.893805 Partitions formatting Installing the base system ... 0%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 19:31 ]... 17%... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 19:32 ]... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 19:33 ]... 48%... 50%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 19:34 ]...  Oct 3 19:34:17.108660  60%... 70%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 19:35 ]... 79%... 83%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 19:36 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 19:37 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 19:38 ]... 91%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 19:39 ]... 100% Oct 3 19:39:58.644770 [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 19:40 ] Configuring apt ... 7%... 14%... 14%... 21%... 35%... 42%... 50%... 61%... 71%. Oct 3 19:40:36.068692 ... 82%... 92%... 100% Oct 3 19:40:38.673675 Select and install software ... 1%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 19:41 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 19:42 ]... 9%... 10%... 13%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 19:43 ]... 20%... 30%... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 19:44 ]... Oct 3 19:44:23.405785  50%... 60%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 19:45 ]... 70%... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 19:46 ]... 88%... 90%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 19:47 ]... 94%... 100% Oct 3 19:47:56.149727 [  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 19:48 ] Finishing the installation ... 4%... 12%[  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 19:49 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 19:50 ][  (1*installer) 2 shell 3 shell 4- log ][ Oct 03 19:51 ]... 16%... 20%... 32%... 40%... 44%... Oct 3 19:51:13.364837  52%... 60%... 72%... 80%... 92% The system is going down NOW! Oct 3 19:51:23.660844 Sent SIGTERM Sent SIGKILL to all processes Oct 3 19:51:24.664835 Requesting system reboot Oct 3 19:51:24.664835 [ 1390.287775] reboot: Reó Oct 3 19:51:26.028854 Oct 3 19:51:26.028854 Oct 3 19:51:26.029058 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 19:51:26.029117 Oct 3 19:51:26.029146 CPU: Exynos5250@1000MHz Oct 3 19:51:26.041049 Oct 3 19:51:26.041120 Board: Arndale Oct 3 19:51:26.041163 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 19:51:26.041212 ready Oct 3 19:51:26.041303 DRAM: 2 GiB Oct 3 19:51:26.041348 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 19:51:26.064897 trace: enabled Oct 3 19:51:26.100781 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 19:51:26.464810 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 19:51:26.512841 In: serial Oct 3 19:51:26.524868 Out: serial Oct 3 19:51:26.524868 Err: serial Oct 3 19:51:26.524868 SCSI: ARNDALE SCSI INIT Oct 3 19:51:26.524868 Target spinup took 0 ms. Oct 3 19:51:26.524868 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 19:51:26.536870 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 19:51:26.536870 Net: Net Initialization Skipped Oct 3 19:51:26.548844 No ethernet found. Oct 3 19:51:26.548844 Hostname: arndale-westfield Oct 3 19:51:26.548844 Hit any key to stop autoboot: 2  1  0 Oct 3 19:51:28.464654 (Re)start USB... Oct 3 19:51:28.476678 USB0: USB EHCI 1.00 Oct 3 19:51:28.476678 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 19:51:34.068833 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 19:51:34.080721 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 19:51:34.524692 Waiting for Ethernet connection... done. Oct 3 19:51:36.176672 BOOTP broadcast 1 Oct 3 19:51:36.176672 BOOTP broadcast 2 Oct 3 19:51:37.648701 DHCP client bound to address 10.149.64.45 (1541 ms) Oct 3 19:51:37.660738 Using asx0 device Oct 3 19:51:37.660738 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 19:51:37.660738 Filename 'pxelinux.0'. Oct 3 19:51:37.660738 Load address: 0x43e00000 Oct 3 19:51:37.660738 Loading: *### Oct 3 19:51:37.684711 2.4 MiB/s Oct 3 19:51:37.684711 done Oct 3 19:51:37.684711 Bytes transferred = 42430 (a5be hex) Oct 3 19:51:37.684711 missing environment variable: pxeuuid Oct 3 19:51:37.684711 Retrieving file: pxelinux.cfg/0A95402D Oct 3 19:51:37.696745 Using asx0 device Oct 3 19:51:37.696745 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 19:51:37.696745 Filename 'pxelinux.cfg/0A95402D'. Oct 3 19:51:37.708743 Load address: 0x51000000 Oct 3 19:51:37.708743 Loading: *# Oct 3 19:51:37.708743 31.3 KiB/s Oct 3 19:51:37.708743 done Oct 3 19:51:37.708743 Bytes transferred = 65 (41 hex) Oct 3 19:51:37.708743 Config file found Oct 3 19:51:37.708743 Ignoring unknown command: serial Oct 3 19:51:37.720696 1: local Oct 3 19:51:37.720696 scanning bus for devices... Oct 3 19:51:37.720696 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 19:51:37.744709 Type: Hard Disk Oct 3 19:51:37.756742 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 19:51:37.756742 Found 1 device(s). Oct 3 19:51:37.756742 Oct 3 19:51:37.756742 SCSI device 0: Oct 3 19:51:37.756742 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 19:51:37.765774 Type: Hard Disk Oct 3 19:51:37.765830 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 19:51:37.765879 ... is now current device Oct 3 19:51:37.777706 Scanning scsi 0... Oct 3 19:51:37.777761 Found U-Boot script /boot.scr Oct 3 19:51:37.909702 639 bytes read in 44 ms (13.7 KiB/s) Oct 3 19:51:37.957727 ## Executing script at 50000000 Oct 3 19:51:37.969698 Loading dtbs/exynos5250-arndale.dtb Oct 3 19:51:37.969756 46686 bytes read in 1371 ms (33.2 KiB/s) Oct 3 19:51:39.304803 Loading vmlinuz-6.1.0-26-armmp-lpae Oct 3 19:51:39.304803 5505536 bytes read in 227 ms (23.1 MiB/s) Oct 3 19:51:39.556841 Loading initrd.img-6.1.0-26-armmp-lpae Oct 3 19:51:39.556841 25737809 bytes read in 1966 ms (12.5 MiB/s) Oct 3 19:51:41.460994 Booting Oct 3 19:51:41.472876 Kernel image @ 0x42000000 [ 0x000000 - 0x540200 ] Oct 3 19:51:41.472876 ## Flattened Device Tree blob at 43000000 Oct 3 19:51:41.472876 Booting using the fdt blob at 0x43000000 Oct 3 19:51:41.484840 Loading Ramdisk to 4e774000, end 4ffffa51 ... OK Oct 3 19:51:41.896952 Loading Device Tree to 4e765000, end 4e77365d ... OK Oct 3 19:51:41.897593 Oct 3 19:51:41.908804 Starting kernel ...(fake run for tracing) Oct 3 19:51:41.908804 Oct 3 19:51:41.908804 Oct 3 19:51:41.908804 Starting kernel ... Oct 3 19:51:41.908804 Oct 3 19:51:41.908804 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 19:51:48.069752 [ 0.000000] Linux version 6.1.0-26-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.112-1 (2024-09-30) Oct 3 19:51:48.081716 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=30c5387d Oct 3 19:51:48.093673 [ 0.000000] CPU: div instructions available: patching division code Oct 3 19:51:48.093709 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 19:51:48.105703 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 19:51:48.105742 [ 0.000000] Memory policy: Data cache writealloc Oct 3 19:51:48.117707 [ 0.000000] efi: UEFI not found. Oct 3 19:51:48.117740 [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000 Oct 3 19:51:48.117767 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 19:51:48.129690 [ 0.000000] Zone ranges: Oct 3 19:51:48.129722 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Oct 3 19:51:48.129750 [ 0.000000] Normal empty Oct 3 19:51:48.141685 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Oct 3 19:51:48.141685 [ 0.000000] Movable zone start for each node Oct 3 19:51:48.153711 [ 0.000000] Early memory node ranges Oct 3 19:51:48.153748 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 19:51:48.153776 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Oct 3 19:51:48.165726 [ 0.000000] percpu: Embedded 18 pages/cpu s44820 r8192 d20716 u73728 Oct 3 19:51:48.177676 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Oct 3 19:51:48.177713 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=ttySAC2,115200n8 Oct 3 19:51:48.189756 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Oct 3 19:51:48.201707 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 19:51:48.201744 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Oct 3 19:51:48.213721 [ 0.000000] Memory: 2015500K/2097152K available (12288K kernel code, 1717K rwdata, 3748K rodata, 2048K init, 382K bss, 65268K reserved, 16384K cma-reserved, 1294332K highmem) Oct 3 19:51:48.225712 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 19:51:48.237705 [ 0.000000] ftrace: allocating 39999 entries in 118 pages Oct 3 19:51:48.237739 [ 0.000000] ftrace: allocated 118 pages with 5 groups Oct 3 19:51:48.237765 [ 0.000000] trace event string verifier disabled Oct 3 19:51:48.249716 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 19:51:48.249749 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Oct 3 19:51:48.261720 [ 0.000000] Rude variant of Tasks RCU enabled. Oct 3 19:51:48.261755 [ 0.000000] Tracing variant of Tasks RCU enabled. Oct 3 19:51:48.273709 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Oct 3 19:51:48.273749 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 19:51:48.285763 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 19:51:48.285812 [ 0.000000] GIC: Using split EOI/Deactivate mode Oct 3 19:51:48.297707 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 19:51:48.297742 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 19:51:48.309688 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Oct 3 19:51:48.309723 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Oct 3 19:51:48.321681 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Oct 3 19:51:48.333694 [ 0.000019] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Oct 3 19:51:48.333731 [ 0.002606] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 3 19:51:48.345709 [ 0.002620] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 19:51:48.357688 [ 0.002635] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 19:51:48.357726 [ 0.002647] Ignoring duplicate/late registration of read_current_timer delay Oct 3 19:51:48.369740 [ 0.003010] Console: colour dummy device 80x30 Oct 3 19:51:48.369787 [ 0.003052] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Oct 3 19:51:48.381733 [ 0.003065] CPU: Testing write buffer coherency: ok Oct 3 19:51:48.393711 [ 0.003108] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 19:51:48.393756 [ 0.003116] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 19:51:48.405722 [ 0.003122] pid_max: default: 32768 minimum: 301 Oct 3 19:51:48.405757 [ 0.003487] LSM: Security Framework initializing Oct 3 19:51:48.417706 [ 0.003558] landlock: Up and running. Oct 3 19:51:48.417739 [ 0.003562] Yama: disabled by default; enable with sysctl kernel.yama.* Oct 3 19:51:48.417767 [ 0.003747] AppArmor: AppArmor initialized Oct 3 19:51:48.429670 [ 0.003759] TOMOYO Linux initialized Oct 3 19:51:48.429670 [ 0.003802] LSM support for eBPF active Oct 3 19:51:48.429670 [ 0.004046] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 19:51:48.441695 [ 0.004060] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Oct 3 19:51:48.453710 [ 0.005463] /cpus/cpu@0 missing clock-frequency property Oct 3 19:51:48.453773 [ 0.005491] /cpus/cpu@1 missing clock-frequency property Oct 3 19:51:48.465716 [ 0.005504] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 19:51:48.465758 [ 0.006467] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 19:51:48.477759 [ 0.006473] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 19:51:48.477798 [ 0.006577] cblist_init_generic: Setting adjustable number of callback queues. Oct 3 19:51:48.489705 [ 0.006582] cblist_init_generic: Setting shift to 1 and lim to 1. Oct 3 19:51:48.489740 [ 0.006720] Setting up static identity map for 0x40400000 - 0x404000ac Oct 3 19:51:48.501691 [ 0.007877] rcu: Hierarchical SRCU implementation. Oct 3 19:51:48.501726 [ 0.007883] rcu: Max phase no-delay instances is 1000. Oct 3 19:51:48.513675 [ 0.010001] EFI services will not be available. Oct 3 19:51:48.513709 [ 0.010353] smp: Bringing up secondary CPUs ... Oct 3 19:51:48.513735 [ 0.011096] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 19:51:48.525677 [ 0.011108] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 19:51:48.537681 [ 0.011250] smp: Brought up 1 node, 2 CPUs Oct 3 19:51:48.537714 [ 0.011259] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 19:51:48.537742 [ 0.011266] CPU: All CPU(s) started in HYP mode. Oct 3 19:51:48.549679 [ 0.011270] CPU: Virtualization extensions available. Oct 3 19:51:48.549712 [ 0.012131] devtmpfs: initialized Oct 3 19:51:48.561676 [ 0.023149] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 19:51:48.561714 [ 0.023381] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 3 19:51:48.573675 [ 0.023405] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 19:51:48.585682 [ 0.023953] pinctrl core: initialized pinctrl subsystem Oct 3 19:51:48.585717 [ 0.024704] DMI not present or invalid. Oct 3 19:51:48.585742 [ 0.025383] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 19:51:48.597687 [ 0.026945] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 19:51:48.597722 [ 0.028445] audit: initializing netlink subsys (disabled) Oct 3 19:51:48.609681 [ 0.028652] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 Oct 3 19:51:48.609718 [ 0.029829] thermal_sys: Registered thermal governor 'fair_share' Oct 3 19:51:48.621685 [ 0.029836] thermal_sys: Registered thermal governor 'bang_bang' Oct 3 19:51:48.621719 [ 0.029841] thermal_sys: Registered thermal governor 'step_wise' Oct 3 19:51:48.633678 [ 0.029845] thermal_sys: Registered thermal governor 'user_space' Oct 3 19:51:48.633712 [ 0.029850] thermal_sys: Registered thermal governor 'power_allocator' Oct 3 19:51:48.645679 [ 0.030051] No ATAGs? Oct 3 19:51:48.645710 [ 0.030115] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Oct 3 19:51:48.657682 [ 0.030123] hw-breakpoint: maximum watchpoint size is 8 bytes. Oct 3 19:51:48.657716 [ 0.031209] Serial: AMBA PL011 UART driver Oct 3 19:51:48.669709 [ 0.080735] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 19:51:48.669748 [ 0.087695] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Oct 3 19:51:48.681714 [ 0.091810] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages Oct 3 19:51:48.693707 [ 0.091818] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page Oct 3 19:51:48.693742 [ 0.099017] iommu: Default domain type: Translated Oct 3 19:51:48.705705 [ 0.099025] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 19:51:48.705739 [ 0.099995] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 19:51:48.717722 [ 0.100507] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 19:51:48.717722 [ 0.100518] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 19:51:48.717722 [ 0.101062] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 19:51:48.729729 [ 0.101092] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 19:51:48.741713 [ 0.101326] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 19:51:48.741746 [ 0.101827] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 19:51:48.753707 [ 0.101837] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 19:51:48.753741 [ 0.102223] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 19:51:48.765705 [ 0.102518] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 19:51:48.765738 [ 0.102527] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 19:51:48.777709 [ 0.102841] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 19:51:48.777742 [ 0.102944] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 19:51:48.777768 [ 0.102953] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 19:51:48.789716 [ 0.103165] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 19:51:48.789749 [ 0.103383] pps_core: LinuxPPS API ver. 1 registered Oct 3 19:51:48.801682 [ 0.103389] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 19:51:48.813685 [ 0.103405] PTP clock support registered Oct 3 19:51:48.813723 [ 0.104925] NetLabel: Initializing Oct 3 19:51:48.813748 [ 0.104931] NetLabel: domain hash size = 128 Oct 3 19:51:48.825707 [ 0.104936] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Oct 3 19:51:48.825742 [ 0.104990] NetLabel: unlabeled traffic allowed by default Oct 3 19:51:48.825769 [ 0.105179] vgaarb: loaded Oct 3 19:51:48.837712 [ 0.105892] clocksource: Switched to clocksource mct-frc Oct 3 19:51:48.837746 [ 0.106453] VFS: Disk quotas dquot_6.6.0 Oct 3 19:51:48.837772 [ 0.106537] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 3 19:51:48.849725 [ 0.107349] AppArmor: AppArmor Filesystem Enabled Oct 3 19:51:48.849758 [ 0.117284] NET: Registered PF_INET protocol family Oct 3 19:51:48.861706 [ 0.117475] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Oct 3 19:51:48.861744 [ 0.119126] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 19:51:48.873721 [ 0.119226] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 19:51:48.885713 [ 0.119250] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Oct 3 19:51:48.885750 [ 0.119350] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Oct 3 19:51:48.897719 [ 0.119582] TCP: Hash tables configured (established 8192 bind 8192) Oct 3 19:51:48.909702 [ 0.119819] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Oct 3 19:51:48.909740 [ 0.119912] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 19:51:48.921714 [ 0.119953] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Oct 3 19:51:48.921749 [ 0.120180] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 19:51:48.933697 [ 0.120220] NET: Registered PF_XDP protocol family Oct 3 19:51:48.933731 [ 0.120231] PCI: CLS 0 bytes, default 64 Oct 3 19:51:48.933756 [ 0.120717] Trying to unpack rootfs image as initramfs... Oct 3 19:51:48.945707 [ 0.121063] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Oct 3 19:51:48.957713 [ 0.126449] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Oct 3 19:51:48.957751 [ 0.192679] Initialise system trusted keyrings Oct 3 19:51:48.969713 [ 0.192770] Key type blacklist registered Oct 3 19:51:48.969746 [ 0.193999] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Oct 3 19:51:48.969774 [ 0.201918] zbud: loaded Oct 3 19:51:48.981705 [ 0.204324] integrity: Platform Keyring initialized Oct 3 19:51:48.981738 [ 0.204357] integrity: Machine keyring initialized Oct 3 19:51:48.993676 [ 0.204366] Key type asymmetric registered Oct 3 19:51:48.993676 [ 0.204373] Asymmetric key parser 'x509' registered Oct 3 19:51:48.993676 [ 1.417829] Freeing initrd memory: 25136K Oct 3 19:51:49.005714 [ 1.440048] alg: self-tests for CTR-KDF (hmac(sha256)) passed Oct 3 19:51:49.005754 [ 1.440317] bounce: pool size: 64 pages Oct 3 19:51:49.005779 [ 1.440495] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 19:51:49.017733 [ 1.440660] io scheduler mq-deadline registered Oct 3 19:51:49.017733 [ 1.445776] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 19:51:49.029721 [ 1.466956] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 19:51:49.041710 [ 1.466968] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 19:51:49.041715 [ 1.469313] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 19:51:49.053710 [ 1.469323] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 19:51:49.065708 [ 1.470167] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 19:51:49.065708 [ 1.470176] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 19:51:49.077724 [ 1.471005] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 19:51:49.089714 [ 1.471013] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 19:51:49.101709 [ 1.473326] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 19:51:49.101749 [ 1.476190] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 19:51:49.113721 [ 1.478967] Serial: AMBA driver Oct 3 19:51:49.113753 [ 1.479193] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Oct 3 19:51:49.125707 [ 1.479674] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Oct 3 19:51:49.137712 [ 1.480159] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Oct 3 19:51:49.137750 [ 2.560888] printk: console [ttySAC2] enabled Oct 3 19:51:49.149682 [ 2.565700] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Oct 3 19:51:49.161666 [ 2.576357] STM32 USART driver initialized Oct 3 19:51:49.161703 [ 2.590835] mousedev: PS/2 mouse device common for all mice Oct 3 19:51:49.173669 [ 2.622127] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 19:51:49.209689 [ 2.630729] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T19:51:49 UTC (1727985109) Oct 3 19:51:49.221705 [ 2.640532] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 19:51:49.221740 [ 2.647998] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 19:51:49.233646 [ 2.655974] NET: Registered PF_INET6 protocol family Oct 3 19:51:49.245649 [ 2.680167] Segment Routing with IPv6 Oct 3 19:51:49.269711 [ 2.682459] In-situ OAM (IOAM) with IPv6 Oct 3 19:51:49.269744 [ 2.686398] mip6: Mobile IPv6 Oct 3 19:51:49.269768 [ 2.689227] NET: Registered PF_PACKET protocol family Oct 3 19:51:49.281710 [ 2.694423] mpls_gso: MPLS GSO support Oct 3 19:51:49.281742 [ 2.698443] ThumbEE CPU extension supported. Oct 3 19:51:49.281768 [ 2.702269] Registering SWP/SWPB emulation handler Oct 3 19:51:49.293672 [ 2.707510] registered taskstats version 1 Oct 3 19:51:49.293672 [ 2.711135] Loading compiled-in X.509 certificates Oct 3 19:51:49.293672 [ 3.166350] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Oct 3 19:51:49.749785 [ 3.173678] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Oct 3 19:51:49.761782 [ 3.184766] zswap: loaded using pool lzo/zbud Oct 3 19:51:49.761866 [ 3.188654] Key type .fscrypt registered Oct 3 19:51:49.773747 [ 3.192002] Key type fscrypt-provisioning registered Oct 3 19:51:49.773808 [ 3.216319] Key type encrypted registered Oct 3 19:51:49.797747 [ 3.218920] AppArmor: AppArmor sha1 policy hashing enabled Oct 3 19:51:49.797809 [ 3.224374] ima: No TPM chip found, activating TPM-bypass! Oct 3 19:51:49.809791 [ 3.229838] ima: Allocated hash algorithm: sha256 Oct 3 19:51:49.809851 [ 3.234560] ima: No architecture policies found Oct 3 19:51:49.821757 [ 3.239105] evm: Initialising EVM extended attributes: Oct 3 19:51:49.821818 [ 3.244144] evm: security.selinux Oct 3 19:51:49.821864 [ 3.247432] evm: security.SMACK64 (disabled) Oct 3 19:51:49.833766 [ 3.251684] evm: security.SMACK64EXEC (disabled) Oct 3 19:51:49.833826 [ 3.256287] evm: security.SMACK64TRANSMUTE (disabled) Oct 3 19:51:49.845753 [ 3.261323] evm: security.SMACK64MMAP (disabled) Oct 3 19:51:49.845815 [ 3.265921] evm: security.apparmor Oct 3 19:51:49.845861 [ 3.269289] evm: security.ima Oct 3 19:51:49.845903 [ 3.272255] evm: security.capability Oct 3 19:51:49.857730 [ 3.275822] evm: HMAC attrs: 0x1 Oct 3 19:51:49.857788 [ 3.858922] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 19:51:50.445753 [ 3.864878] clk: Disabling unused clocks Oct 3 19:51:50.445822 [ 3.877752] Freeing unused kernel image (initmem) memory: 2048K Oct 3 19:51:50.457773 [ 3.882638] Checked W+X mappings: passed, no W+X pages found Oct 3 19:51:50.469713 [ 3.887883] Run /init as init process Oct 3 19:51:50.469771 Loading, please wait... Oct 3 19:51:50.505715 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 19:51:50.577744 [ 4.813529] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 19:51:51.393747 [ 4.862593] Synopsys Designware Multimedia Card Interface Driver Oct 3 19:51:51.441748 [ 4.868801] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 19:51:51.453735 [ 4.890939] usbcore: registered new interface driver usbfs Oct 3 19:51:51.477783 [ 4.896094] usbcore: registered new interface driver hub Oct 3 19:51:51.477844 [ 4.902322] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 19:51:51.489718 [ 4.915982] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 19:51:51.501750 [ 4.925295] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 19:51:51.513711 [ 4.930308] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 19:51:51.513773 [ 4.946897] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 19:51:51.537780 [ 4.954353] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 19:51:51.537845 [ 4.960688] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 19:51:51.549735 [ 4.965144] SCSI subsystem initialized Oct 3 19:51:51.549767 [ 4.970056] usbcore: registered new device driver usb Oct 3 19:51:51.549793 [ 4.978214] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 19:51:51.561707 [ 4.992591] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo Oct 3 19:51:51.573768 [ 5.003717] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo Oct 3 19:51:51.585777 [ 5.012180] mmc_host mmc0: card is polling. Oct 3 19:51:51.597800 [ 5.045246] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 19:51:51.633875 [ 5.054567] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 19:51:51.645779 [ 5.092286] phy phy-12130000.phy.2: phy_power_on was called before phy_init Oct 3 19:51:51.681769 [ 5.099954] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 19:51:51.681804 [ 5.105798] phy phy-12130000.phy.2: phy_power_on was called before phy_init Oct 3 19:51:51.693815 [ 5.119999] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Oct 3 19:51:51.705851 [ 5.129134] exynos-ohci 12120000.usb: USB Host Controller Oct 3 19:51:51.705884 [ 5.134786] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Oct 3 19:51:51.717822 [ 5.150784] exynos-ehci 12110000.usb: irq 109, io mem 0x12110000 Oct 3 19:51:51.729781 [ 5.158481] exynos-ohci 12120000.usb: irq 109, io mem 0x12120000 Oct 3 19:51:51.741729 [ 5.171648] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 19:51:51.753757 [ 5.178197] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 19:51:51.765765 [ 5.189771] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 19:51:51.777788 [ 5.196624] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 19:51:51.777824 [ 5.203811] usb usb1: Product: EHCI Host Controller Oct 3 19:51:51.789786 [ 5.208652] usb usb1: Manufacturer: Linux 6.1.0-26-armmp-lpae ehci_hcd Oct 3 19:51:51.789821 [ 5.215155] usb usb1: SerialNumber: 12110000.usb Oct 3 19:51:51.801720 [ 5.239923] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 19:51:51.825703 [ 5.251595] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 19:51:51.837702 [ 5.259685] mmc1: new high speed SDHC card at address aaaa Oct 3 19:51:51.837735 [ 5.260686] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 19:51:51.849715 [ 5.271341] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 19:51:51.861719 [ 5.286975] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Oct 3 19:51:51.873743 [ 5.296409] mmc0: new DDR MMC card at address 0001 Oct 3 19:51:51.873777 [ 5.299431] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 19:51:51.885794 [ 5.306885] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Oct 3 19:51:51.897789 [ 5.315659] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 19:51:51.897828 [ 5.319955] hub 1-0:1.0: USB hub found Oct 3 19:51:51.909787 [ 5.328739] hub 1-0:1.0: 3 ports detected Oct 3 19:51:51.909819 [ 5.334491] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Oct 3 19:51:51.921768 [ 5.335648] scsi host0: ahci-dwc Oct 3 19:51:51.921799 [ 5.344352] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 110 Oct 3 19:51:51.933785 [ 5.351008] mmcblk0: p1 p2 p3 p4 Oct 3 19:51:51.933816 [ 5.355266] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Oct 3 19:51:51.945790 [ 5.362475] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 19:51:51.945827 [ 5.369664] usb usb2: Product: USB Host Controller Oct 3 19:51:51.957783 [ 5.374436] usb usb2: Manufacturer: Linux 6.1.0-26-armmp-lpae ohci_hcd Oct 3 19:51:51.957818 [ 5.380950] usb usb2: SerialNumber: 12120000.usb Oct 3 19:51:51.969768 [ 5.387180] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Oct 3 19:51:51.969802 [ 5.394319] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Oct 3 19:51:51.981760 [ 5.400173] hub 2-0:1.0: USB hub found Oct 3 19:51:51.981791 [ 5.402905] hub 2-0:1.0: 3 ports detected Oct 3 19:51:51.981816 [ 5.410451] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (241:0) Oct 3 19:51:51.993681 [ 5.569624] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 19:51:52.161716 [ 5.638119] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 19:51:52.221720 [ 5.746557] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 19:51:52.329724 [ 5.825960] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 19:51:52.413647 [ 5.831574] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 19:51:52.413695 [ 5.837375] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 19:51:52.425690 [ 5.844875] ata1.00: configured for UDMA/133 Oct 3 19:51:52.425721 [ 5.848588] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 19:51:52.437735 [ 5.856314] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 19:51:52.449600 [ 5.908820] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 19:51:52.485662 [ 5.912904] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 19:51:52.497725 [ 5.921028] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 19:51:52.509690 [ 5.929935] xhci-hcd xhci-hcd.2.auto: irq 111, io mem 0x12000000 Oct 3 19:51:52.509720 [ 5.936860] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 19:51:52.521712 [ 5.941343] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 19:51:52.521749 [ 5.948971] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 19:51:52.533698 [ 5.955644] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Oct 3 19:51:52.545661 [ 5.963725] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 19:51:52.545694 [ 5.970981] usb usb3: Product: xHCI Host Controller Oct 3 19:51:52.557666 [ 5.975799] usb usb3: Manufacturer: Linux 6.1.0-26-armmp-lpae xhci-hcd Oct 3 19:51:52.557701 [ 5.982293] usb usb3: SerialNumber: xhci-hcd.2.auto Oct 3 19:51:52.569730 [ 5.987251] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 19:51:52.569795 [ 5.988759] hub 3-0:1.0: USB hub found Oct 3 19:51:52.581681 [ 6.000340] hub 3-0:1.0: 1 port detected Oct 3 19:51:52.581709 [ 6.005113] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 19:51:52.593637 [ 6.012290] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Oct 3 19:51:52.593670 [ 6.020415] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 3 19:51:52.605660 [ 6.027622] usb usb4: Product: xHCI Host Controller Oct 3 19:51:52.605688 [ 6.032481] usb usb4: Manufacturer: Linux 6.1.0-26-armmp-lpae xhci-hcd Oct 3 19:51:52.617634 [ 6.038991] usb usb4: SerialNumber: xhci-hcd.2.auto Oct 3 19:51:52.617664 [ 6.046568] hub 4-0:1.0: USB hub found Oct 3 19:51:52.629664 [ 6.048894] hub 4-0:1.0: 1 port detected Oct 3 19:51:52.629696 [ 6.092358] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 19:51:52.677688 [ 6.098460] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 19:51:52.677722 [ 6.103682] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 19:51:52.689656 [ 6.112987] sd 0:0:0:0: [sda] Write Protect is off Oct 3 19:51:52.701633 [ 6.117761] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 19:51:52.701671 [ 6.127574] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 19:51:52.713584 [ 6.147537] sda: sda1 sda2 < sda5 > Oct 3 19:51:52.725795 [ 6.152004] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 19:51:52.737690 [ 6.213002] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 19:51:52.797705 [ 6.320965] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 19:51:52.905664 [ 6.428956] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 19:51:53.013652 [ 6.536958] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 19:51:53.121747 [ 6.945439] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 19:51:53.529709 [ 7.053044] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 19:51:53.637693 [ 7.197917] random: crng init done Oct 3 19:51:53.781678 [ 7.307239] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. Oct 3 19:51:53.901706 [ 7.318064] device-mapper: uevent: version 1.0.3 Oct 3 19:51:53.901739 [ 7.322800] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Oct 3 19:51:53.913658 [ 7.661131] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 19:51:54.249654 Begin: Loading essential drivers ... done. Oct 3 19:51:54.573640 Begin: Running /scripts/init-premount ... done. Oct 3 19:51:57.585774 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 19:51:57.585856 Begin: Running /scripts/local-premount ... done. Oct 3 19:51:57.633701 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 19:51:57.669719 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 19:51:57.753780 /dev/mapper/arndale--westfield--vg-root: clean, 44569/1220608 files, 430115/4882432 blocks Oct 3 19:51:57.969625 done. Oct 3 19:51:57.989567 [ 16.606515] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 19:52:03.196972 [ 16.799116] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 19:52:03.388790 done. Oct 3 19:52:03.388790 Begin: Running /scripts/local-bottom ... done. Oct 3 19:52:03.436486 Begin: Running /scripts/init-bottom ... done. Oct 3 19:52:03.472766 [ 17.106205] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. Oct 3 19:52:03.700811 INIT: version 3.06 booting Oct 3 19:52:03.940785 INIT: No inittab.d directory found Oct 3 19:52:04.036810 Using makefile-style concurrent boot in runlevel S. Oct 3 19:52:04.364834 Starting hotplug events dispatcher: systemd-udevd. Oct 3 19:52:06.064777 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 19:52:06.280833 Synthesizing the initial hotplug events (devices)...done. Oct 3 19:52:06.916815 Waiting for /dev to be fully populated...[ 20.525741] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Oct 3 19:52:07.108828 [ 20.535199] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 19:52:07.120840 [ 20.692173] panfrost 11800000.gpu: clock rate = 533000000 Oct 3 19:52:07.276856 [ 20.704181] sd 0:0:0:0: Attached scsi generic sg0 type 0 Oct 3 19:52:07.288848 [ 20.723499] panfrost 11800000.gpu: mali-t600 id 0x600 major 0x0 minor 0x0 status 0x1 Oct 3 19:52:07.313077 [ 20.729812] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,31b4dfff Oct 3 19:52:07.324979 [ 20.737959] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 Oct 3 19:52:07.336863 [ 20.749669] panfrost 11800000.gpu: shader_present=0xf l2_present=0x1 Oct 3 19:52:07.336863 [ 20.795487] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 0 Oct 3 19:52:07.384991 [ 20.841943] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 19:52:07.432839 [ 20.911504] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 19:52:07.504828 [ 20.941973] usb3503 usb-hub: switched to HUB mode Oct 3 19:52:07.528880 [ 20.945206] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 19:52:07.528880 [ 21.020405] blk_print_req_error: 6 callbacks suppressed Oct 3 19:52:07.600854 [ 21.020416] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 19:52:07.612873 [ 21.133862] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 19:52:07.720854 [ 21.242243] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 19:52:07.829044 [ 21.274088] usb 1-3: new high-speed USB device number 2 using exynos-ehci Oct 3 19:52:07.864791 [ 21.350359] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 19:52:07.940902 [ 21.434783] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Oct 3 19:52:08.024806 [ 21.441757] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 3 19:52:08.024806 [ 21.459559] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 19:52:08.048838 [ 21.472196] hub 1-3:1.0: USB hub found Oct 3 19:52:08.060889 [ 21.475458] hub 1-3:1.0: 3 ports detected Oct 3 19:52:08.060889 [ 21.480588] exynos4-fb 14400000.fimd: deferred probe timeout, ignoring dependency Oct 3 19:52:08.072873 [ 21.490165] exynos-mixer 14450000.mixer: deferred probe timeout, ignoring dependency Oct 3 19:52:08.072873 [ 21.540882] OF: graph: no port node found in /soc/hdmi@14530000 Oct 3 19:52:08.133019 [ 21.550330] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations Oct 3 19:52:08.133085 [ 21.556603] exynos-drm exynos-drm: bound 14400000.fimd (ops fimd_component_ops [exynosdrm]) Oct 3 19:52:08.144868 [ 21.565391] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops [exynosdrm]) Oct 3 19:52:08.156849 [ 21.573643] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 19:52:08.168997 [ 21.586211] exynos-drm exynos-drm: bound 14500000.dsi (ops exynos_dsi_component_ops [exynosdrm]) Oct 3 19:52:08.181010 [ 21.593865] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_component_ops [exynosdrm]) Oct 3 19:52:08.181125 [ 21.602430] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 19:52:08.189905 [ 21.608795] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Oct 3 19:52:08.205055 [ 21.615651] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 Oct 3 19:52:08.205138 [ 21.682871] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 19:52:08.276917 [ 21.774082] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 19:52:08.360850 [ 21.791038] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 19:52:08.384816 [ 21.901328] usb 1-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=77.32 Oct 3 19:52:08.492885 [ 21.909591] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Oct 3 19:52:08.492885 [ 21.916105] usb 1-3.2: Product: USB2.0 Hub Oct 3 19:52:08.504781 [ 21.934791] hub 1-3.2:1.0: USB hub found Oct 3 19:52:08.516897 [ 21.938989] hub 1-3.2:1.0: 4 ports detected Oct 3 19:52:08.528779 [ 22.200738] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 19:52:08.792834 [ 22.237986] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 19:52:08.828975 [ 22.309063] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 19:52:08.900836 [ 22.356462] usb 1-3.2.4: New USB device found, idVendor=0b95, idProduct=772a, bcdDevice= 0.01 Oct 3 19:52:08.948882 [ 22.363781] usb 1-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Oct 3 19:52:08.948882 [ 22.371149] usb 1-3.2.4: Product: AX88772 Oct 3 19:52:08.960868 [ 22.375213] usb 1-3.2.4: Manufacturer: ASIX Elec. Corp. Oct 3 19:52:08.960868 [ 22.380549] usb 1-3.2.4: SerialNumber: 000001 Oct 3 19:52:08.960868 [ 22.846037] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 19:52:09.432861 [ 22.926684] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 19:52:09.516814 [ 23.532536] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 19:52:10.120888 [ 23.548202] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Oct 3 19:52:10.144767 [ 23.562061] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 66:0c:8c:2b:17:f4 Oct 3 19:52:10.156784 [ 23.576536] usbcore: registered new interface driver asix Oct 3 19:52:10.156784 done. Oct 3 19:52:10.372666 [ 24.236623] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 19:52:10.813669 Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). Oct 3 19:52:10.861592 Checking file systems.../dev/sda1: clean, 926/61056 files, 33110/243968 blocks Oct 3 19:52:12.529742 done. Oct 3 19:52:12.565704 Cleaning up temporary files... /tmp. Oct 3 19:52:12.805729 [ 26.405568] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 19:52:12.997689 [ 26.454236] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Oct 3 19:52:13.045696 [ 26.750715] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k FS Oct 3 19:52:13.345736 Mounting local filesystems...done. Oct 3 19:52:13.741644 Activating swapfile swap, if any...done. Oct 3 19:52:13.741644 Cleaning up temporary files.... Oct 3 19:52:13.813619 Starting Setting kernel variables: sysctl. Oct 3 19:52:14.089613 [ 28.013521] audit: type=1400 audit(1727985134.704:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=893 comm="apparmor_parser" Oct 3 19:52:14.605746 [ 28.027448] audit: type=1400 audit(1727985134.716:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=894 comm="apparmor_parser" Oct 3 19:52:14.629777 [ 28.044339] audit: type=1400 audit(1727985134.732:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=894 comm="apparmor_parser" Oct 3 19:52:14.641741 [ 28.218190] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 19:52:14.809658 [ 28.395913] audit: type=1400 audit(1727985135.088:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=938 comm="apparmor_parser" Oct 3 19:52:14.989785 [ 28.410557] audit: type=1400 audit(1727985135.088:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=938 comm="apparmor_parser" Oct 3 19:52:15.001769 [ 28.424397] audit: type=1400 audit(1727985135.088:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=938 comm="apparmor_parser" Oct 3 19:52:15.025677 [ 28.710344] audit: type=1400 audit(1727985135.404:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=935 comm="apparmor_parser" Oct 3 19:52:15.313775 [ 28.726824] audit: type=1400 audit(1727985135.404:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=935 comm="apparmor_parser" Oct 3 19:52:15.325817 [ 28.744078] audit: type=1400 audit(1727985135.408:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=935 comm="apparmor_parser" Oct 3 19:52:15.337820 [ 28.761620] audit: type=1400 audit(1727985135.416:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=935 comm="apparmor_parser" Oct 3 19:52:15.361703 Starting: AppArmorLoading AppArmor profiles...done. Oct 3 19:52:15.397677 . Oct 3 19:52:15.397732 [ 30.375735] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 19:52:16.957734 [ 30.381942] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 3 19:52:16.969654 Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1 Oct 3 19:52:18.709753 Copyright 2004-2022 Internet Systems Consortium. Oct 3 19:52:18.709753 All rights reserved. Oct 3 19:52:18.709830 For info, please visit https://www.isc.org/software/dhcp/ Oct 3 19:52:18.721707 Oct 3 19:52:18.721707 Listening on LPF/eth0/a6:46:13:77:e8:2f Oct 3 19:52:18.721750 Sending on LPF/eth0/a6:46:13:77:e8:2f Oct 3 19:52:18.721819 Sending on Socket/fallback Oct 3 19:52:18.733768 Created duid "\000\001\000\001.\221\262n\246F\023w\350/". Oct 3 19:52:18.733836 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 Oct 3 19:52:18.745674 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 Oct 3 19:52:20.341751 DHCPOFFER of 10.149.64.45 from 10.149.64.4 Oct 3 19:52:20.353743 DHCPREQUEST for 10.149.64.45 on eth0 to 255.255.255.255 port 67 Oct 3 19:52:20.353794 DHCPACK of 10.149.64.45 from 10.149.64.4 Oct 3 19:52:20.353836 bound to 10.149.64.45 -- renewal in 266 seconds. Oct 3 19:52:20.365595 done. Oct 3 19:52:20.365623 Cleaning up temporary files.... Oct 3 19:52:20.401656 Starting nftables: none Oct 3 19:52:20.497645 . Oct 3 19:52:20.797616 INIT: Entering runlevel: 2 Oct 3 19:52:20.849707 Using makefile-style concurrent boot in runlevel 2. Oct 3 19:52:20.893728 Starting Apache httpd web server: apache2. Oct 3 19:52:22.889696 Starting NTP server: ntpd2024-10-03T19:52:23 ntpd[1132]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 19:52:23.225751 2024-10-03T19:52:23 ntpd[1132]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 19:52:23.237738 . Oct 3 19:52:23.237789 Starting periodic command scheduler: cron. Oct 3 19:52:23.261680 Starting system message bus: dbus. Oct 3 19:52:23.801587 Starting OpenBSD Secure Shell server: sshd. Oct 3 19:52:24.173742 Oct 3 19:52:25.265712 Debian GNU/Linux 12 arndale-westfield ttySAC2 Oct 3 19:52:25.277734 Oct 3 19:52:25.277785 arndale-westfield login: INIT: Switching to r INIT: No inittab.d directorUsing makefile-style concurrent boot in runlevel 6. Oct 3 19:57:39.785826 Stopping SMP IRQ Balancer: irqbalance. Oct 3 19:57:39.845737 Stopping hotplug events dispatcher: systemd-udevd. Oct 3 19:57:39.857733 Stopping nftables: none. Oct 3 19:57:39.869682 Saving the system clock to /dev/rtc0. Oct 3 19:57:40.001734 Hardware Clock updated to Thu Oct 3 19:57:40 UTC 2024. Oct 3 19:57:40.001799 Stopping Apache httpd web server: apache2. Oct 3 19:57:41.033750 Asking all remaining processes to terminate...done. Oct 3 19:57:41.357768 All processes ended within 1 seconds...done. Oct 3 19:57:41.357832 Deconfiguring network interfaces...ifdown: ignoring unknown interface eth0=eth0 Oct 3 19:57:41.453769 done. Oct 3 19:57:41.465676 [ 355.064612] EXT4-fs (sda1): unmounting filesystem. Oct 3 19:57:41.645622 Deactivating swap...done. Oct 3 19:57:41.717872 Unmounting local filesystems...done. Oct 3 19:57:41.717872 [ 355.374825] EXT4-fs (dm-0): re-mounted. Quota mode: none. Oct 3 19:57:41.957735 Will now restart. Oct 3 19:57:42.233715 [ 355.676865] asix 1-3.2.4:1.0 eth0: Link is Down Oct 3 19:57:42.257719 [ 355.746949] sd 0:0:0:0: [sda] Synchronizing SCSI cache Oct 3 19:57:42.329756 [ 355.754803] wake enabled for irq 101 (gpx1-4) Oct 3 19:57:42.341735 [ 355.757687] wake enabled for irq 102 (gpx1-5) Oct 3 19:57:42.341816 [ 355.762049] wake enabled for irq 103 (gpx1-6) Oct 3 19:57:42.341869 [ 355.766383] wake enabled for irq 104 (gpx1-7) Oct 3 19:57:42.353765 [ 355.770723] wake enabled for irq 105 (gpx2-0) Oct 3 19:57:42.353826 [ 355.775062] wake enabled for irq 106 (gpx2-1) Oct 3 19:57:42.353874 [ 355.779890] reboot: Reű Oct 3 19:57:42.689728 Oct 3 19:57:42.689788 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Oct 3 19:57:42.701740 Oct 3 19:57:42.701788 CPU: Exynos5250@1000MHz Oct 3 19:57:42.701841 Oct 3 19:57:42.701905 Board: Arndale Oct 3 19:57:42.701972 I2C: i2c_init: failed to init bus 0 for speed = 100000 Oct 3 19:57:42.713743 ready Oct 3 19:57:42.713801 DRAM: 2 GiB Oct 3 19:57:42.713881 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Oct 3 19:57:42.725745 trace: enabled Oct 3 19:57:42.761683 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Oct 3 19:57:43.121738 i2c_init: failed to init bus 0 for speed = 100000 Oct 3 19:57:43.181724 In: serial Oct 3 19:57:43.181778 Out: serial Oct 3 19:57:43.181819 Err: serial Oct 3 19:57:43.181858 SCSI: ARNDALE SCSI INIT Oct 3 19:57:43.193739 Target spinup took 0 ms. Oct 3 19:57:43.193795 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Oct 3 19:57:43.205750 flags: ncq stag pm led clo only pmp pio slum part ccc apst Oct 3 19:57:43.205811 Net: Net Initialization Skipped Oct 3 19:57:43.205856 No ethernet found. Oct 3 19:57:43.205896 Hostname: arndale-westfield Oct 3 19:57:43.217760 Hit any key to stop autoboot: 2  1  0 Oct 3 19:57:45.137792 (Re)start USB... Oct 3 19:57:45.137864 USB0: USB EHCI 1.00 Oct 3 19:57:45.137906 scanning bus 0 for devices... 4 USB Device(s) found Oct 3 19:57:50.741854 scanning usb for storage devices... 0 Storage Device(s) found Oct 3 19:57:50.741939 scanning usb for ethernet devices... 1 Ethernet Device(s) found Oct 3 19:57:51.185757 Waiting for Ethernet connection... done. Oct 3 19:57:52.829779 BOOTP broadcast 1 Oct 3 19:57:52.841730 BOOTP broadcast 2 Oct 3 19:57:53.877051 DHCP client bound to address 10.149.64.45 (1078 ms) Oct 3 19:57:53.877123 Using asx0 device Oct 3 19:57:53.877165 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 19:57:53.889014 Filename 'pxelinux.0'. Oct 3 19:57:53.889070 Load address: 0x43e00000 Oct 3 19:57:53.889113 Loading: *### Oct 3 19:57:53.900994 2.4 MiB/s Oct 3 19:57:53.901049 done Oct 3 19:57:53.901089 Bytes transferred = 42430 (a5be hex) Oct 3 19:57:53.913038 missing environment variable: pxeuuid Oct 3 19:57:53.913096 Retrieving file: pxelinux.cfg/0A95402D Oct 3 19:57:53.913142 Using asx0 device Oct 3 19:57:53.913182 TFTP from server 10.149.64.3; our IP address is 10.149.64.45 Oct 3 19:57:53.925064 Filename 'pxelinux.cfg/0A95402D'. Oct 3 19:57:53.925122 Load address: 0x51000000 Oct 3 19:57:53.925165 Loading: *# Oct 3 19:57:53.925205 20.5 KiB/s Oct 3 19:57:53.925288 done Oct 3 19:57:53.925330 Bytes transferred = 65 (41 hex) Oct 3 19:57:53.937043 Config file found Oct 3 19:57:53.937098 Ignoring unknown command: serial Oct 3 19:57:53.937143 1: local Oct 3 19:57:53.937182 scanning bus for devices... Oct 3 19:57:53.937259 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 19:57:53.972995 Type: Hard Disk Oct 3 19:57:53.973051 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 19:57:53.985040 Found 1 device(s). Oct 3 19:57:53.985096 Oct 3 19:57:53.985135 SCSI device 0: Oct 3 19:57:53.985176 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Oct 3 19:57:53.997046 Type: Hard Disk Oct 3 19:57:53.997102 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Oct 3 19:57:53.997152 ... is now current device Oct 3 19:57:53.997194 Scanning scsi 0... Oct 3 19:57:54.008926 Found U-Boot script /boot.scr Oct 3 19:57:54.200839 1742 bytes read in 50 ms (33.2 KiB/s) Oct 3 19:57:54.260889 ## Executing script at 50000000 Oct 3 19:57:54.260889 Loading dtbs/6.1.112+/exynos5250-arndale.dtb Oct 3 19:57:54.260889 46686 bytes read in 2980 ms (14.6 KiB/s) Oct 3 19:57:57.144834 1081360 bytes read in 136 ms (7.6 MiB/s) Oct 3 19:57:57.300870 Loaded xen-4.20-unstable to 0x41000000 (108010) Oct 3 19:57:57.300870 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan Oct 3 19:57:57.312881 10039808 bytes read in 493 ms (19.4 MiB/s) Oct 3 19:57:57.816868 Loaded vmlinuz-6.1.112+ to 0x42000000 (993200) Oct 3 19:57:57.816868 command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 19:57:57.840820 12059064 bytes read in 759 ms (15.2 MiB/s) Oct 3 19:57:58.588848 Loaded initrd.img-6.1.112+ to 0x43300000 (b801b8) Oct 3 19:57:58.600873 chosen { Oct 3 19:57:58.600873 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan"; Oct 3 19:57:58.612895 #size-cells = <0x00000001>; Oct 3 19:57:58.612895 #address-cells = <0x00000001>; Oct 3 19:57:58.612895 stdout-path = "serial2:115200n8"; Oct 3 19:57:58.612895 module@1 { Oct 3 19:57:58.612895 reg = <0x43300000 0x00b801b8>; Oct 3 19:57:58.624898 compatible = "xen,linux-initrd", "xen,multiboot-module"; Oct 3 19:57:58.624898 }; Oct 3 19:57:58.624898 module@0 { Oct 3 19:57:58.624898 bootargs = "ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Oct 3 19:57:58.648893 reg = <0x42000000 0x00993200>; Oct 3 19:57:58.648893 compatible = "xen,linux-zimage", "xen,multiboot-module"; Oct 3 19:57:58.648893 }; Oct 3 19:57:58.648893 }; Oct 3 19:57:58.648893 Booting 0x41000000 - 0x43000000 Oct 3 19:57:58.660880 Kernel image @ 0x41000000 [ 0x000000 - 0x144000 ] Oct 3 19:57:58.660880 ## Flattened Device Tree blob at 43000000 Oct 3 19:57:58.660880 Booting using the fdt blob at 0x43000000 Oct 3 19:57:58.672898 reserving fdt memory region: addr=43000000 size=c000 Oct 3 19:57:58.672898 Loading Device Tree to 4fff1000, end 4fffffff ... OK Oct 3 19:57:58.672898 Oct 3 19:57:58.684876 Starting kernel ...(fake run for tracing) Oct 3 19:57:58.684876 Oct 3 19:57:58.684876 Oct 3 19:57:58.684876 Starting kernel ... Oct 3 19:57:58.684876 Oct 3 19:57:58.684876 __ __ _ _ ____ ___ _ _ _ Oct 3 19:57:58.744892 \ \/ /___ _ __ | || | |___ \ / _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Oct 3 19:57:58.744892 \ // _ \ '_ \ | || |_ __) | | | |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Oct 3 19:57:58.756897 / \ __/ | | | |__ _| / __/| |_| |__| |_| | | | \__ \ || (_| | |_) | | __/ Oct 3 19:57:58.756897 /_/\_\___|_| |_| |_|(_)_____|\___/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Oct 3 19:57:58.768895 Oct 3 19:57:58.768895 (XEN) Xen version 4.20-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Thu Oct 3 17:30:19 UTC 2024 Oct 3 19:57:58.780858 (XEN) Latest ChangeSet: Wed Oct 2 19:01:26 2024 +0100 git:444cb9350f-dirty Oct 3 19:57:58.792900 (XEN) build-id: 0f89b636aa5c8d0625ea02e4a8dce6e57f822fb1 Oct 3 19:57:58.792900 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Oct 3 19:57:58.804898 (XEN) 32-bit Execution: Oct 3 19:57:58.804898 (XEN) Processor Features: 00001031:00011011 Oct 3 19:57:58.804898 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Oct 3 19:57:58.804898 (XEN) Extensions: GenericTimer Security Oct 3 19:57:58.816894 (XEN) Debug Features: 02010555 Oct 3 19:57:58.816894 (XEN) Auxiliary Features: 00000000 Oct 3 19:57:58.816894 (XEN) Memory Model Features: 10201105 20000000 Oct 3 19:57:58.828896 (XEN) 01240000 02102211 Oct 3 19:57:58.828896 (XEN) ISA Features: 02101110 13112111 21232041 Oct 3 19:57:58.828896 (XEN) 11112131 10011142 00000000 Oct 3 19:57:58.840897 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Oct 3 19:57:58.852903 (XEN) Set SYSRAM to 0000000041000070 (00200070) Oct 3 19:57:58.852903 (XEN) SMP: Allowing 2 CPUs Oct 3 19:57:58.852903 (XEN) enabled workaround for: ARM erratum 766422 Oct 3 19:57:58.864970 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Oct 3 19:57:58.864994 (XEN) GICv2 initialization: Oct 3 19:57:58.865073 (XEN) gic_dist_addr=0000000010481000 Oct 3 19:57:58.876899 (XEN) gic_cpu_addr=0000000010482000 Oct 3 19:57:58.876899 (XEN) gic_hyp_addr=0000000010484000 Oct 3 19:57:58.876899 (XEN) gic_vcpu_addr=0000000010486000 Oct 3 19:57:58.888902 (XEN) gic_maintenance_irq=25 Oct 3 19:57:58.888902 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Oct 3 19:57:58.888902 (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2) Oct 3 19:57:58.900900 (XEN) Initializing Credit2 scheduler Oct 3 19:57:58.900900 (XEN) load_precision_shift: 18 Oct 3 19:57:58.900900 (XEN) load_window_shift: 30 Oct 3 19:57:58.900900 (XEN) underload_balance_tolerance: 0 Oct 3 19:57:58.912900 (XEN) overload_balance_tolerance: -3 Oct 3 19:57:58.912900 (XEN) runqueues arrangement: socket Oct 3 19:57:58.912900 (XEN) cap enforcement granularity: 10ms Oct 3 19:57:58.924904 (XEN) load tracking window length 1073741824 ns Oct 3 19:57:58.924904 (XEN) Allocated console ring of 16 KiB. Oct 3 19:57:58.924904 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Oct 3 19:57:58.936897 (XEN) CPU0: Guest atomics will try 1 times before pausing the domain Oct 3 19:57:58.936897 (XEN) Bringing up CPU1 Oct 3 19:57:58.936897 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Oct 3 19:57:58.948849 (XEN) Brought up 2 CPUs Oct 3 19:57:58.948849 (XEN) CPU 1 booted. Oct 3 19:57:58.948849 (XEN) I/O virtualisation disabled Oct 3 19:57:58.960788 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Oct 3 19:57:58.960788 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Oct 3 19:57:58.960788 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Oct 3 19:57:58.972790 (XEN) Initializing Credit2 scheduler Oct 3 19:57:58.972790 (XEN) load_precision_shift: 18 Oct 3 19:57:58.972790 (XEN) load_window_shift: 30 Oct 3 19:57:58.972790 (XEN) underload_balance_tolerance: 0 Oct 3 19:57:58.982658 (XEN) overload_balance_tolerance: -3 Oct 3 19:57:58.982658 (XEN) runqueues arrangement: socket Oct 3 19:57:58.996897 (XEN) cap enforcement granularity: 10ms Oct 3 19:57:58.996897 (XEN) load tracking window length 1073741824 ns Oct 3 19:57:58.996897 (XEN) Adding cpu 0 to runqueue 0 Oct 3 19:57:58.996897 (XEN) First cpu on runqueue, activating Oct 3 19:57:59.008838 (XEN) Adding cpu 1 to runqueue 0 Oct 3 19:57:59.008838 (XEN) alternatives: Patching with alt table 002d2f0c -> 002d2fe4 Oct 3 19:57:59.008838 (XEN) CPU0 will execute ICIALLU on guest exit Oct 3 19:57:59.020818 (XEN) CPU1 will execute ICIALLU on guest exit Oct 3 19:57:59.020818 (XEN) *** LOADING DOMAIN 0 *** Oct 3 19:57:59.020818 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Oct 3 19:57:59.032771 (XEN) Loading ramdisk from boot module @ 0000000043300000 Oct 3 19:57:59.032771 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Oct 3 19:57:59.032771 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Oct 3 19:57:59.588878 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Oct 3 19:57:59.600837 (XEN) Allocating PPI 16 for event channel interrupt Oct 3 19:57:59.624879 (XEN) d0: extended regions not supported for 32-bit guests Oct 3 19:57:59.636850 (XEN) Loading zImage from 0000000042000000 to 0000000067600000-0000000067f93200 Oct 3 19:57:59.636850 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d801b8 Oct 3 19:57:59.731139 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b4c2 Oct 3 19:57:59.828888 (XEN) Initial low memory virq threshold set at 0x4000 pages. Oct 3 19:57:59.840908 (XEN) Scrubbing Free RAM in background Oct 3 19:57:59.840908 (XEN) Std. Loglevel: All Oct 3 19:57:59.840908 (XEN) Guest Loglevel: All Oct 3 19:57:59.840908 (XEN) *************************************************** Oct 3 19:57:59.852878 (XEN) WARNING: SILO mode is not enabled. Oct 3 19:57:59.852878 (XEN) It has implications on the security of the system, Oct 3 19:57:59.852878 (XEN) unless the communications have been forbidden between Oct 3 19:57:59.864900 (XEN) untrusted domains. Oct 3 19:57:59.864900 (XEN) *************************************************** Oct 3 19:57:59.876816 (XEN) 3... 2... 1... Oct 3 19:58:02.872989 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 19:58:02.900096 (XEN) Freed 356kB init memory. Oct 3 19:58:02.900180 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 19:58:03.944811 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Oct 3 19:58:03.968877 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Oct 3 19:58:03.968877 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Oct 3 19:58:03.980970 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Oct 3 19:58:03.980970 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 19:58:03.990783 [ 0.000000] Booting Linux on physical CPU 0x0 Oct 3 19:58:04.028817 [ 0.000000] Linux version 6.1.112+ (osstest@himrod2) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Thu Oct 3 15:31:22 UTC 2024 Oct 3 19:58:04.040894 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Oct 3 19:58:04.053044 [ 0.000000] CPU: div instructions available: patching division code Oct 3 19:58:04.053115 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Oct 3 19:58:04.064974 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Oct 3 19:58:04.077045 [ 0.000000] Memory policy: Data cache writealloc Oct 3 19:58:04.077105 [ 0.000000] Xen 4.20 support found Oct 3 19:58:04.077150 [ 0.000000] efi: UEFI not found. Oct 3 19:58:04.089041 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 Oct 3 19:58:04.089102 [ 0.000000] Samsung CPU ID: 0x43520010 Oct 3 19:58:04.089148 [ 0.000000] Zone ranges: Oct 3 19:58:04.101053 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Oct 3 19:58:04.101117 [ 0.000000] Normal empty Oct 3 19:58:04.101161 [ 0.000000] HighMem empty Oct 3 19:58:04.113006 [ 0.000000] Movable zone start for each node Oct 3 19:58:04.113066 [ 0.000000] Early memory node ranges Oct 3 19:58:04.113112 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Oct 3 19:58:04.128205 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Oct 3 19:58:04.128264 [ 0.000000] psci: probing for conduit method from DT. Oct 3 19:58:04.136892 [ 0.000000] psci: PSCIv1.1 detected in firmware. Oct 3 19:58:04.136922 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Oct 3 19:58:04.148897 [ 0.000000] psci: Trusted OS migration not required Oct 3 19:58:04.148926 [ 0.000000] psci: SMC Calling Convention v1.2 Oct 3 19:58:04.148951 [ 0.000000] percpu: Embedded 16 pages/cpu s35412 r8192 d21932 u65536 Oct 3 19:58:04.161033 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 Oct 3 19:58:04.173052 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Oct 3 19:58:04.185052 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 19:58:04.197025 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Oct 3 19:58:04.197094 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Oct 3 19:58:04.209028 [ 0.000000] Memory: 416844K/524288K available (14336K kernel code, 2180K rwdata, 5604K rodata, 2048K init, 438K bss, 41908K reserved, 65536K cma-reserved, 0K highmem) Oct 3 19:58:04.221033 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 3 19:58:04.233042 [ 0.000000] trace event string verifier disabled Oct 3 19:58:04.233103 [ 0.000000] rcu: Hierarchical RCU implementation. Oct 3 19:58:04.233151 [ 0.000000] rcu: RCU event tracing is enabled. Oct 3 19:58:04.244688 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Oct 3 19:58:04.244784 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Oct 3 19:58:04.256892 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Oct 3 19:58:04.268858 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Oct 3 19:58:04.268858 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Oct 3 19:58:04.280887 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Oct 3 19:58:04.280887 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Oct 3 19:58:04.292878 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 3 19:58:04.304900 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 3 19:58:04.304900 [ 0.000012] Switching to timer-based delay loop, resolution 41ns Oct 3 19:58:04.316909 [ 0.000501] Console: colour dummy device 80x30 Oct 3 19:58:04.316909 [ 0.293140] printk: console [hvc0] enabled Oct 3 19:58:04.316909 [ 0.297351] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Oct 3 19:58:04.328899 [ 0.307751] CPU: Testing write buffer coherency: ok Oct 3 19:58:04.340895 [ 0.312675] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 19:58:04.352896 [ 0.322228] CPU0: Spectre BHB: enabling loop workaround for all CPUs Oct 3 19:58:04.352896 [ 0.328641] pid_max: default: 32768 minimum: 301 Oct 3 19:58:04.352896 [ 0.333437] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 19:58:04.364966 [ 0.340709] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Oct 3 19:58:04.376895 [ 0.349126] /cpus/cpu@0 missing clock-frequency property Oct 3 19:58:04.376895 [ 0.353911] /cpus/cpu@1 missing clock-frequency property Oct 3 19:58:04.388895 [ 0.359306] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Oct 3 19:58:04.388895 [ 0.365818] xen:grant_table: Grant tables using version 1 layout Oct 3 19:58:04.400891 [ 0.371156] Grant table initialized Oct 3 19:58:04.400891 [ 0.374697] xen:events: Using FIFO-based ABI Oct 3 19:58:04.400891 [ 0.379013] Xen: initializing cpu0 Oct 3 19:58:04.412901 [ 0.382541] Setting up static identity map for 0x60300000 - 0x603000ac Oct 3 19:58:04.412901 [ 0.390275] rcu: Hierarchical SRCU implementation. Oct 3 19:58:04.424889 [ 0.393930] rcu: Max phase no-delay instances is 1000. Oct 3 19:58:04.424889 [ 0.401977] EFI services will not be available. Oct 3 19:58:04.424889 [ 0.405285] smp: Bringing up secondary CPUs ... Oct 3 19:58:04.436845 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 19:58:04.508898 [ 0.479821] Xen: initializing cpu1 Oct 3 19:58:04.508898 [ 0.479979] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Oct 3 19:58:04.508898 [ 0.480008] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Oct 3 19:58:04.520895 [ 0.498883] smp: Brought up 1 node, 2 CPUs Oct 3 19:58:04.532897 [ 0.502649] SMP: Total of 2 processors activated (96.00 BogoMIPS). Oct 3 19:58:04.532897 [ 0.508960] CPU: All CPU(s) started in SVC mode. Oct 3 19:58:04.544823 [ 0.514373] devtmpfs: initialized Oct 3 19:58:04.544823 [ 0.526976] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Oct 3 19:58:04.556894 [ 0.533464] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Oct 3 19:58:04.568899 [ 0.543183] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Oct 3 19:58:04.580891 [ 0.551196] pinctrl core: initialized pinctrl subsystem Oct 3 19:58:04.580891 [ 0.557747] DMI not present or invalid. Oct 3 19:58:04.580891 [ 0.560853] NET: Registered PF_NETLINK/PF_ROUTE protocol family Oct 3 19:58:04.592894 [ 0.568046] DMA: preallocated 256 KiB pool for atomic coherent allocations Oct 3 19:58:04.604884 [ 0.576833] thermal_sys: Registered thermal governor 'step_wise' Oct 3 19:58:04.604884 [ 0.576963] software IO TLB: area num 2. Oct 3 19:58:04.616887 [ 0.585647] software IO TLB: only able to allocate 8 MB Oct 3 19:58:04.616887 [ 0.592779] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Oct 3 19:58:04.628891 [ 0.597963] No ATAGs? Oct 3 19:58:04.628891 [ 0.600315] hw-breakpoint: Failed to enable monitor mode on CPU 0. Oct 3 19:58:04.628891 [ 0.608838] Serial: AMBA PL011 UART driver Oct 3 19:58:04.640824 [ 0.640992] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 62 Oct 3 19:58:04.676835 [ 0.690383] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Oct 3 19:58:04.724848 [ 0.716294] xen:balloon: Initialising balloon driver Oct 3 19:58:04.748871 [ 0.723824] iommu: Default domain type: Translated Oct 3 19:58:04.748871 [ 0.727324] iommu: DMA domain TLB invalidation policy: strict mode Oct 3 19:58:04.760899 [ 0.734276] SCSI subsystem initialized Oct 3 19:58:04.760899 [ 0.737832] usbcore: registered new interface driver usbfs Oct 3 19:58:04.772891 [ 0.743071] usbcore: registered new interface driver hub Oct 3 19:58:04.772891 [ 0.748485] usbcore: registered new device driver usb Oct 3 19:58:04.784894 [ 0.755098] s3c-i2c 12c60000.i2c: slave address 0x66 Oct 3 19:58:04.784894 [ 0.758723] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Oct 3 19:58:04.784894 [ 0.765016] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Oct 3 19:58:04.796892 [ 0.773455] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Oct 3 19:58:04.808893 [ 0.782598] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Oct 3 19:58:04.808893 [ 0.788139] s3c-i2c 12c90000.i2c: slave address 0x00 Oct 3 19:58:04.820898 [ 0.792800] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Oct 3 19:58:04.820898 [ 0.799056] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Oct 3 19:58:04.832898 [ 0.804282] s3c-i2c 12ce0000.i2c: slave address 0x00 Oct 3 19:58:04.832898 [ 0.809052] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Oct 3 19:58:04.844899 [ 0.815175] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Oct 3 19:58:04.844899 [ 0.820347] s3c-i2c 121d0000.i2c: slave address 0x00 Oct 3 19:58:04.844899 [ 0.825262] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Oct 3 19:58:04.856899 [ 0.831297] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Oct 3 19:58:04.856899 [ 0.837065] pps_core: LinuxPPS API ver. 1 registered Oct 3 19:58:04.868895 [ 0.841504] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 3 19:58:04.880851 [ 0.850705] PTP clock support registered Oct 3 19:58:04.880851 [ 0.862506] EDAC MC: Ver: 3.0.0 Oct 3 19:58:04.892983 [ 0.872462] vgaarb: loaded Oct 3 19:58:04.904936 [ 0.878124] clocksource: Switched to clocksource arch_sys_counter Oct 3 19:58:04.905002 [ 0.889579] NET: Registered PF_INET protocol family Oct 3 19:58:04.916876 [ 0.893222] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Oct 3 19:58:04.928900 [ 0.901127] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Oct 3 19:58:04.928900 [ 0.908842] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Oct 3 19:58:04.940890 [ 0.916612] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Oct 3 19:58:04.952930 [ 0.924465] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Oct 3 19:58:04.952930 [ 0.931751] TCP: Hash tables configured (established 4096 bind 4096) Oct 3 19:58:04.964894 [ 0.938134] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 19:58:04.964894 [ 0.944659] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Oct 3 19:58:04.976894 [ 0.951802] NET: Registered PF_UNIX/PF_LOCAL protocol family Oct 3 19:58:04.976894 [ 0.968335] RPC: Registered named UNIX socket transport module. Oct 3 19:58:05.001022 [ 0.972881] RPC: Registered udp transport module. Oct 3 19:58:05.001089 [ 0.977653] RPC: Registered tcp transport module. Oct 3 19:58:05.012902 [ 0.982441] RPC: Registered tcp NFSv4.1 backchannel transport module. Oct 3 19:58:05.012902 [ 0.988973] PCI: CLS 0 bytes, default 64 Oct 3 19:58:05.012902 [ 0.994248] Initialise system trusted keyrings Oct 3 19:58:05.025022 [ 0.997614] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Oct 3 19:58:05.025093 [ 0.999819] Trying to unpack rootfs image as initramfs... Oct 3 19:58:05.036882 [ 1.011905] squashfs: version 4.0 (2009/01/31) Phillip Lougher Oct 3 19:58:05.036882 [ 1.043593] NFS: Registering the id_resolver key type Oct 3 19:58:05.072893 [ 1.047309] Key type id_resolver registered Oct 3 19:58:05.072893 [ 1.051580] Key type id_legacy registered Oct 3 19:58:05.084897 [ 1.055721] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Oct 3 19:58:05.084897 [ 1.062422] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Oct 3 19:58:05.096973 [ 1.085953] Key type asymmetric registered Oct 3 19:58:05.108793 [ 1.088737] Asymmetric key parser 'x509' registered Oct 3 19:58:05.120845 [ 1.093775] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Oct 3 19:58:05.120845 [ 1.101121] io scheduler mq-deadline registered Oct 3 19:58:05.132932 [ 1.105699] io scheduler kyber registered Oct 3 19:58:05.132932 [ 1.121956] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Oct 3 19:58:05.156785 [ 1.173911] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 19:58:05.204878 [ 1.180178] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 19:58:05.216865 [ 1.195065] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 19:58:05.228892 [ 1.201300] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Oct 3 19:58:05.240871 [ 1.215245] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 19:58:05.252881 [ 1.221487] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 19:58:05.252881 [ 1.235782] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Oct 3 19:58:05.264895 [ 1.242011] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Oct 3 19:58:05.276862 [ 1.258034] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Oct 3 19:58:05.288876 [ 1.275632] xen:xen_evtchn: Event-channel device installed Oct 3 19:58:05.300858 [ 1.326896] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Oct 3 19:58:05.360880 [ 1.335775] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 113, base_baud = 0) is a S3C6400/10 Oct 3 19:58:05.372897 [ 1.343976] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 114, base_baud = 0) is a S3C6400/10 Oct 3 19:58:05.372897 [ 1.352923] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 115, base_baud = 0) is a S3C6400/10 Oct 3 19:58:05.384901 [ 1.362259] SuperH (H)SCI(F) driver initialized Oct 3 19:58:05.397003 [ 1.367207] STMicroelectronics ASC driver initialized Oct 3 19:58:05.397072 [ 1.372477] STM32 USART driver initialized Oct 3 19:58:05.397119 [ 1.388615] exynos-trng 10830600.rng: Exynos True Random Number Generator. Oct 3 19:58:05.420885 [ 1.431104] brd: module loaded Oct 3 19:58:05.456743 [ 1.436931] loop: module loaded Oct 3 19:58:05.468726 [ 1.641077] Freeing initrd memory: 11780K Oct 3 19:58:05.672864 [ 1.647952] Invalid max_queues (4), will use default max: 2. Oct 3 19:58:05.672864 [ 1.674096] tun: Universal TUN/TAP device driver, 1.6 Oct 3 19:58:05.708896 [ 1.677975] CAN device driver interface Oct 3 19:58:05.708896 [ 1.683065] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Oct 3 19:58:05.708896 [ 1.693515] xen_netfront: Initialising Xen virtual ethernet driver Oct 3 19:58:05.720884 [ 1.698426] pegasus: Pegasus/Pegasus II USB Ethernet driver Oct 3 19:58:05.732900 [ 1.703989] usbcore: registered new interface driver pegasus Oct 3 19:58:05.732900 [ 1.709740] usbcore: registered new interface driver asix Oct 3 19:58:05.744888 [ 1.715185] usbcore: registered new interface driver ax88179_178a Oct 3 19:58:05.744888 [ 1.721359] usbcore: registered new interface driver cdc_ether Oct 3 19:58:05.756908 [ 1.727258] usbcore: registered new interface driver smsc75xx Oct 3 19:58:05.756908 [ 1.733087] usbcore: registered new interface driver smsc95xx Oct 3 19:58:05.769049 [ 1.738940] usbcore: registered new interface driver net1080 Oct 3 19:58:05.769127 [ 1.744630] usbcore: registered new interface driver cdc_subset Oct 3 19:58:05.780849 [ 1.750674] usbcore: registered new interface driver zaurus Oct 3 19:58:05.780849 [ 1.756262] usbcore: registered new interface driver cdc_ncm Oct 3 19:58:05.792858 [ 1.765947] usbcore: registered new interface driver usb-storage Oct 3 19:58:05.792858 [ 1.817704] s5m-rtc s5m-rtc: registered as rtc0 Oct 3 19:58:05.840848 [ 1.826542] s5m-rtc s5m-rtc: setting system clock to 2024-10-03T19:52:06 UTC (1727985126) Oct 3 19:58:05.852955 [ 1.835106] i2c_dev: i2c /dev entries driver Oct 3 19:58:05.864858 [ 1.845403] syscon-poweroff 10040000.system-controller:syscon-poweroff: pm_power_off already claimed for psci_sys_poweroff Oct 3 19:58:05.876900 [ 1.855101] syscon-poweroff: probe of 10040000.system-controller:syscon-poweroff failed with error -16 Oct 3 19:58:05.888818 [ 1.866325] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Oct 3 19:58:05.900872 [ 1.877147] device-mapper: uevent: version 1.0.3 Oct 3 19:58:05.900951 [ 1.880640] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Oct 3 19:58:05.912824 [ 1.889632] cpu cpu0: OPP table can't be empty Oct 3 19:58:05.924797 [ 1.894609] failed to register cpuidle driver Oct 3 19:58:05.924797 [ 1.897840] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Oct 3 19:58:05.924797 [ 1.906142] sdhci: Secure Digital Host Controller Interface driver Oct 3 19:58:05.936781 [ 1.911233] sdhci: Copyright(c) Pierre Ossman Oct 3 19:58:05.936781 [ 1.919263] sdhci-pltfm: SDHCI platform and OF driver helper Oct 3 19:58:05.948782 [ 1.926910] ledtrig-cpu: registered to indicate activity on CPUs Oct 3 19:58:05.960841 [ 1.932247] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Oct 3 19:58:05.960841 [ 1.938845] usbcore: registered new interface driver usbhid Oct 3 19:58:05.972796 [ 1.943687] usbhid: USB HID core driver Oct 3 19:58:05.972796 [ 1.954517] NET: Registered PF_INET6 protocol family Oct 3 19:58:05.984840 [ 1.959145] Segment Routing with IPv6 Oct 3 19:58:05.984840 [ 1.961871] In-situ OAM (IOAM) with IPv6 Oct 3 19:58:05.996880 [ 1.965887] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Oct 3 19:58:05.996880 [ 1.972343] NET: Registered PF_PACKET protocol family Oct 3 19:58:05.996880 [ 1.976960] can: controller area network core Oct 3 19:58:06.008843 [ 1.981443] NET: Registered PF_CAN protocol family Oct 3 19:58:06.008843 [ 1.986229] can: raw protocol Oct 3 19:58:06.008843 [ 1.989305] can: broadcast manager protocol Oct 3 19:58:06.020901 [ 1.993526] can: netlink gateway - max_hops=1 Oct 3 19:58:06.020901 [ 1.998240] Key type dns_resolver registered Oct 3 19:58:06.032882 [ 2.002883] ThumbEE CPU extension supported. Oct 3 19:58:06.032882 [ 2.006633] Registering SWP/SWPB emulation handler Oct 3 19:58:06.032882 [ 2.011994] Loading compiled-in X.509 certificates Oct 3 19:58:06.044835 [ 2.040299] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Oct 3 19:58:06.068888 [ 2.046357] clk: Not disabling unused clocks Oct 3 19:58:06.080880 [ 2.053438] Freeing unused kernel image (initmem) memory: 2048K Oct 3 19:58:06.080880 [ 2.059611] Run /init as init process Oct 3 19:58:06.092808 Loading, please wait... Oct 3 19:58:06.116767 Starting systemd-udevd version 252.30-1~deb12u2 Oct 3 19:58:06.180851 [ 3.503975] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Oct 3 19:58:07.540844 [ 3.511100] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Oct 3 19:58:07.540844 [ 3.532453] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Oct 3 19:58:07.564864 [ 3.543207] phy phy-12130000.phy.9: phy_power_on was called before phy_init Oct 3 19:58:07.576876 [ 3.548838] exynos-ehci 12110000.usb: EHCI Host Controller Oct 3 19:58:07.576876 [ 3.554366] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Oct 3 19:58:07.588821 [ 3.562698] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 Oct 3 19:58:07.588821 [ 3.598344] Synopsys Designware Multimedia Card Interface Driver Oct 3 19:58:07.624763 [ 3.608195] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Oct 3 19:58:07.636796 [ 3.608385] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Oct 3 19:58:07.648804 [ 3.613810] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Oct 3 19:58:07.648804 [ 3.627375] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Oct 3 19:58:07.660800 [ 3.634216] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Oct 3 19:58:07.660800 [ 3.634228] dwmmc_exynos 12200000.mmc: Version ID is 241a Oct 3 19:58:07.672809 [ 3.634337] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo Oct 3 19:58:07.684792 [ 3.640915] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Oct 3 19:58:07.684792 [ 3.646569] mmc_host mmc0: card is polling. Oct 3 19:58:07.696803 [ 3.655930] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Oct 3 19:58:07.696803 [ 3.675237] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Oct 3 19:58:07.708775 [ 3.682133] dwmmc_exynos 12220000.mmc: Version ID is 241a Oct 3 19:58:07.720801 [ 3.692953] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 127,32 bit host data width,128 deep fifo Oct 3 19:58:07.720801 [ 3.702145] hub 1-0:1.0: USB hub found Oct 3 19:58:07.732775 [ 3.705265] hub 1-0:1.0: 3 ports detected Oct 3 19:58:07.732775 [ 3.715310] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 19:58:07.742923 [ 3.724359] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 19:58:07.756813 [ 3.758821] phy phy-12130000.phy.9: phy_power_on was called before phy_init Oct 3 19:58:07.789767 [ 3.764442] exynos-ohci 12120000.usb: USB Host Controller Oct 3 19:58:07.789858 [ 3.769929] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Oct 3 19:58:07.801740 [ 3.779318] s2mps11-clk s5m8767-clk: DMA mask not set Oct 3 19:58:07.813728 [ 3.784423] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Oct 3 19:58:07.813794 [ 3.790196] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Oct 3 19:58:07.825802 [ 3.799100] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Oct 3 19:58:07.837785 [ 3.811624] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 Oct 3 19:58:07.837820 [ 3.826060] scsi host0: ahci-dwc Oct 3 19:58:07.849796 [ 3.828294] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 128 Oct 3 19:58:07.861737 [ 3.876939] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 19:58:07.909791 [ 3.916231] hub 2-0:1.0: USB hub found Oct 3 19:58:07.945759 [ 3.919842] mmc1: new high speed SDHC card at address aaaa Oct 3 19:58:07.945822 [ 3.925723] hub 2-0:1.0: 3 ports detected Oct 3 19:58:07.957698 [ 3.936923] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Oct 3 19:58:07.969752 [ 3.946353] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Oct 3 19:58:07.969812 [ 3.954288] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Oct 3 19:58:07.981741 [ 3.958955] mmc0: new DDR MMC card at address 0001 Oct 3 19:58:07.993708 [ 3.963590] s3c-rtc 101e0000.rtc: registered as rtc1 Oct 3 19:58:07.993770 [ 3.971932] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Oct 3 19:58:08.005636 [ 3.984785] mmcblk0: p1 p2 p3 p4 Oct 3 19:58:08.017645 [ 3.990097] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Oct 3 19:58:08.017699 [ 3.999966] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Oct 3 19:58:08.029733 [ 4.005067] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Oct 3 19:58:08.029797 [ 4.358181] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 3 19:58:08.389758 [ 4.363986] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Oct 3 19:58:08.389830 [ 4.369800] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Oct 3 19:58:08.401768 [ 4.377464] ata1.00: configured for UDMA/133 Oct 3 19:58:08.401830 [ 4.381183] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Oct 3 19:58:08.413775 [ 4.391240] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Oct 3 19:58:08.425749 [ 4.397366] sd 0:0:0:0: [sda] 4096-byte physical blocks Oct 3 19:58:08.425810 [ 4.404551] sd 0:0:0:0: [sda] Write Protect is off Oct 3 19:58:08.437728 [ 4.410024] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 3 19:58:08.437800 [ 4.429352] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Oct 3 19:58:08.461714 [ 4.474045] sda: sda1 sda2 < sda5 > Oct 3 19:58:08.497707 [ 4.477352] sd 0:0:0:0: [sda] Attached SCSI disk Oct 3 19:58:08.509695 [ 4.494128] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Oct 3 19:58:08.521711 [ 4.560766] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Oct 3 19:58:08.593745 [ 4.567702] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 19:58:08.593807 [ 4.572184] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Oct 3 19:58:08.605756 [ 4.581712] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Oct 3 19:58:08.617761 [ 4.590043] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Oct 3 19:58:08.617822 [ 4.596112] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Oct 3 19:58:08.629754 [ 4.601490] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Oct 3 19:58:08.629823 [ 4.609145] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Oct 3 19:58:08.641757 [ 4.616487] hub 3-0:1.0: USB hub found Oct 3 19:58:08.641815 [ 4.620604] hub 3-0:1.0: 1 port detected Oct 3 19:58:08.653733 [ 4.624306] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Oct 3 19:58:08.653804 [ 4.632379] hub 4-0:1.0: USB hub found Oct 3 19:58:08.665717 [ 4.635533] hub 4-0:1.0: 1 port detected Oct 3 19:58:08.665776 [ 4.665790] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 19:58:08.701690 [ 4.740678] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 19:58:08.773728 [ 4.849315] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 19:58:08.881767 [ 4.957400] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 19:58:08.989685 [ 5.065488] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 19:58:09.097751 [ 5.173560] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 19:58:09.205720 [ 5.281627] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 19:58:09.313726 [ 5.389703] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 19:58:09.421741 [ 5.497754] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 19:58:09.529725 [ 5.605817] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 19:58:09.637723 [ 6.014520] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 19:58:10.045745 [ 6.122243] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 19:58:10.153735 [ 6.730564] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 19:58:10.765622 [ 7.108128] random: crng init done Oct 3 19:58:11.137743 Begin: Loading essential drivers ... done. Oct 3 19:58:11.677712 Begin: Running /scripts/init-premount ... done. Oct 3 19:58:14.689753 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Oct 3 19:58:14.701595 Begin: Running /scripts/local-premount ... done. Oct 3 19:58:14.701625 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Oct 3 19:58:14.785546 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--westfield--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--westfield--vg-root Oct 3 19:58:14.881660 /dev/mapper/arndale--westfield--vg-root: clean, 51263/1220608 files, 658410/4882432 blocks Oct 3 19:58:15.085696 done. Oct 3 19:58:15.085749 [ 11.068215] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Oct 3 19:58:15.097739 [ 11.291987] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 19:58:15.325720 done. Oct 3 19:58:15.325772 Begin: Running /scripts/local-bottom ... done. Oct 3 19:58:15.409735 Begin: Running /scripts/init-bottom ... done. Oct 3 19:58:15.457689 INIT: version 3.06 booting Oct 3 19:58:15.880758 INIT: No inittab.d directory found Oct 3 19:58:15.964826 Using makefile-style concurrent boot in runlevel S. Oct 3 19:58:16.264811 Starting hotplug events dispatcher: systemd-udevd. Oct 3 19:58:17.788880 Synthesizing the initial hotplug events (subsystems)...done. Oct 3 19:58:18.245043 Synthesizing the initial hotplug events (devices)...[ 14.739016] wm8994 3-001a: Device is not a WM8994, ID is 0 Oct 3 19:58:18.772900 [ 14.744837] wm8994: probe of 3-001a failed with error -22 Oct 3 19:58:18.772900 [ 15.205013] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Oct 3 19:58:19.240887 [ 15.217797] s5p-secss 10830000.sss: s5p-sss driver registered Oct 3 19:58:19.252871 [ 15.217926] mc: Linux media interface: v0.10 Oct 3 19:58:19.252871 [ 15.272938] videodev: Linux video capture interface: v2.00 Oct 3 19:58:19.300851 done. Oct 3 19:58:19.324901 Waiting for /dev to be fully populated...[ 15.374540] s5p-mfc 11000000.codec: Adding to iommu group 0 Oct 3 19:58:19.408843 [ 15.460873] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Oct 3 19:58:19.492869 [ 15.499448] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 19:58:19.528944 [ 15.507209] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 19:58:19.540947 [ 15.515892] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 19:58:19.552877 [ 15.529179] s5p-mfc 11000000.codec: decoder registered as /dev/video0 Oct 3 19:58:19.564834 [ 15.534544] s5p-mfc 11000000.codec: encoder registered as /dev/video1 Oct 3 19:58:19.564834 [ 15.586720] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Oct 3 19:58:19.624856 [ 15.660290] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Oct 3 19:58:19.697029 [ 15.754280] exynos-gsc 13e00000.gsc: Adding to iommu group 1 Oct 3 19:58:19.780882 [ 15.762814] exynos-gsc 13e10000.gsc: Adding to iommu group 2 Oct 3 19:58:19.792918 [ 15.768169] exynos-gsc 13e20000.gsc: Adding to iommu group 3 Oct 3 19:58:19.792918 [ 15.773021] blk_print_req_error: 6 callbacks suppressed Oct 3 19:58:19.804895 [ 15.773030] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 19:58:19.817049 [ 15.787153] exynos-gsc 13e30000.gsc: Adding to iommu group 4 Oct 3 19:58:19.817117 [ 15.838155] usb3503 usb-hub: switched to HUB mode Oct 3 19:58:19.861650 [ 15.841879] usb3503 usb-hub: usb3503_probe: probed in hub mode Oct 3 19:58:19.876999 [ 15.887663] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 19:58:19.924857 [ 15.999548] I/O error, dev mmcblk1, sector 7744450 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 19:58:20.032752 [ 16.109344] I/O error, dev mmcblk1, sector 7744451 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 19:58:20.144836 [ 16.209581] usb 1-3: new high-speed USB device number 2 using exynos-ehci Oct 3 19:58:20.240841 [ 16.229813] I/O error, dev mmcblk1, sector 7744452 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 19:58:20.265002 [ 16.338289] I/O error, dev mmcblk1, sector 7744453 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 19:58:20.372878 [ 16.384622] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Oct 3 19:58:20.420830 [ 16.440583] hub 1-3:1.0: USB hub found Oct 3 19:58:20.468911 [ 16.447241] I/O error, dev mmcblk1, sector 7744454 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 19:58:20.480811 [ 16.456645] hub 1-3:1.0: 3 ports detected Oct 3 19:58:20.480811 [ 16.555358] I/O error, dev mmcblk1, sector 7744455 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Oct 3 19:58:20.588810 [ 16.644726] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 19:58:20.672927 [ 16.652420] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 19:58:20.684941 [ 16.661154] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 19:58:20.696920 [ 16.674981] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Oct 3 19:58:20.705774 [ 16.682712] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Oct 3 19:58:20.717766 [ 16.691370] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Oct 3 19:58:20.729647 [ 16.778162] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Oct 3 19:58:20.801750 [ 16.930906] hub 1-3.2:1.0: USB hub found Oct 3 19:58:20.957734 [ 16.933870] hub 1-3.2:1.0: 4 ports detected Oct 3 19:58:20.957795 [ 16.972812] I/O error, dev mmcblk1, sector 7744448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 19:58:21.005700 [ 17.005490] usbcore: registered new device driver onboard-usb-hub Oct 3 19:58:21.029760 [ 17.080600] I/O error, dev mmcblk1, sector 7744449 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Oct 3 19:58:21.113697 [ 17.148921] hub 1-3.2:1.0: USB hub found Oct 3 19:58:21.173709 [ 17.151881] hub 1-3.2:1.0: 4 ports detected Oct 3 19:58:21.173807 [ 17.163286] hub 1-3.2:1.0: USB hub found Oct 3 19:58:21.185700 [ 17.166277] hub 1-3.2:1.0: 4 ports detected Oct 3 19:58:21.197678 [ 17.488152] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Oct 3 19:58:21.521802 [ 17.642284] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Oct 3 19:58:21.677621 [ 17.708566] Buffer I/O error on dev mmcblk1, logical block 968056, async page read Oct 3 19:58:21.737699 [ 18.350161] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Oct 3 19:58:22.385783 [ 18.365026] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Oct 3 19:58:22.397731 [ 18.374857] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 9e:5e:82:2f:70:bc Oct 3 19:58:22.409711 done. Oct 3 19:58:22.649706 [ 18.996261] EXT4-fs (dm-0): re-mounted. Quota mode: disabled. Oct 3 19:58:23.021749 Checking file systems.../dev/sda1: clean, 2109/61056 files, 51057/243968 blocks Oct 3 19:58:24.533724 done. Oct 3 19:58:24.569682 Cleaning up temporary files... /tmp. Oct 3 19:58:24.797826 [ 20.965112] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Oct 3 19:58:24.989831 [ 21.013824] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 19:58:25.037756 [ 21.109281] Adding 1949692k swap on /dev/mapper/arndale--westfield--vg-swap_1. Priority:-2 extents:1 across:1949692k Oct 3 19:58:25.145695 Mounting local filesystems...done. Oct 3 19:58:25.373734 Activating swapfile swap, if any...done. Oct 3 19:58:25.373792 Cleaning up temporary files.... Oct 3 19:58:25.409684 Starting Setting kernel variables: sysctl. Oct 3 19:58:25.545657 [ 22.959429] xenbr0: port 1(eth0) entered blocking state Oct 3 19:58:26.992723 [ 22.963310] xenbr0: port 1(eth0) entered disabled state Oct 3 19:58:26.992723 [ 22.968778] device eth0 entered promiscuous mode Oct 3 19:58:26.992723 [ 22.979862] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Oct 3 19:58:27.004748 Configuring network interfaces...RTNETLINK answers: Operation not supported Oct 3 19:58:28.829864 Oct 3 19:58:28.829909 Waiting for xenbr0 to get ready (MAXWAIT is 2 seconds). Oct 3 19:58:28.829936 [ 25.215496] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Oct 3 19:58:29.237850 [ 25.218192] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 3 19:58:29.249849 [ 25.227848] xenbr0: port 1(eth0) entered blocking state Oct 3 19:58:29.249883 [ 25.233088] xenbr0: port 1(eth0) entered forwarding state Oct 3 19:58:29.261835 [ 25.238711] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready Oct 3 19:58:29.261871 done. Oct 3 19:58:29.489776 Cleaning up temporary files.... Oct 3 19:58:29.577188 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Oct 3 19:58:29.649048 Starting nftables: none Oct 3 19:58:29.685014 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Oct 3 19:58:29.721059 failed! Oct 3 19:58:29.721112 startpar: service(s) returned failure: nftables ... failed! Oct 3 19:58:29.733052 INIT: Entering runlevel: 2 Oct 3 19:58:29.745027 Using makefile-style concurrent boot in runlevel 2. Oct 3 19:58:29.769011 Starting Apache httpd web server: apache2AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.149.64.45. Set the 'ServerName' directive globally to suppress this message Oct 3 19:58:30.576852 . Oct 3 19:58:31.641695 Starting NTP server: ntpd2024-10-03T19:52:32 ntpd[1149]: INIT: ntpd ntpsec-1.2.2: Starting Oct 3 19:58:31.956899 2024-10-03T19:52:32 ntpd[1149]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Oct 3 19:58:31.968931 . Oct 3 19:58:31.968931 Starting system message bus: dbus. Oct 3 19:58:32.873043 Starting SMP IRQ Balancer: irqbalance. Oct 3 19:58:32.992930 Starting OpenBSD Secure Shell server: sshd. Oct 3 19:58:33.244988 Starting /usr/local/sbin/xenstored... Oct 3 19:58:35.168906 Setting domain 0 name, domid and JSON config... Oct 3 19:58:35.168906 Done setting up Dom0 Oct 3 19:58:35.180909 Starting xenconsoled... Oct 3 19:58:35.180909 Starting QEMU as disk backend for dom0 Oct 3 19:58:35.180909 Oct 3 19:58:36.264983 Debian GNU/Linux 12 arndale-westfield hvc0 Oct 3 19:58:36.288353 Oct 3 19:58:36.288439 arndale-westfield login: [ 114.283322] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 19:59:58.313753 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 20:00:15.313768 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 20:06:56.717778 [ 638.907604] EXT4-fs (dm-3): unmounting filesystem. Oct 3 20:08:42.932858 [ 645.931152] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Quota mode: disabled. Oct 3 20:08:49.952779 [ 650.966681] EXT4-fs (dm-3): unmounting filesystem. Oct 3 20:08:54.993449 [ 666.055240] xenbr0: port 2(vif1.0) entered blocking state Oct 3 20:09:10.077649 [ 666.059321] xenbr0: port 2(vif1.0) entered disabled state Oct 3 20:09:10.077649 [ 666.064922] device vif1.0 entered promiscuous mode Oct 3 20:09:10.089749 (XEN) d1v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 20:09:11.173689 (XEN) d1v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 20:09:11.185712 [ 667.735160] xen-blkback: backend/vbd/1/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 20:09:11.761661 [ 667.805751] xen-blkback: backend/vbd/1/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 20:09:11.833697 (XEN) common/grant_table.c:1909:d1v0 Expanding d1 grant table from 1 to 2 frames Oct 3 20:09:12.001694 [ 668.198231] vif vif-1-0 vif1.0: Guest Rx ready Oct 3 20:09:12.217728 [ 668.201366] IPv6: ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready Oct 3 20:09:12.229707 [ 668.209008] xenbr0: port 2(vif1.0) entered blocking state Oct 3 20:09:12.229739 [ 668.213498] xenbr0: port 2(vif1.0) entered forwarding state Oct 3 20:09:12.241671 (XEN) gnttab_mark_dirty not implemented yet Oct 3 20:09:12.265681 [ 717.239437] xenbr0: port 2(vif1.0) entered disabled state Oct 3 20:10:01.261748 [ 717.378803] xenbr0: port 2(vif1.0) entered disabled state Oct 3 20:10:01.393820 [ 717.383256] device vif1.0 left promiscuous mode Oct 3 20:10:01.405768 [ 717.387455] xenbr0: port 2(vif1.0) entered disabled state Oct 3 20:10:01.405803 [ 744.926780] xenbr0: port 2(vif2.0) entered blocking state Oct 3 20:10:28.948941 [ 744.930849] xenbr0: port 2(vif2.0) entered disabled state Oct 3 20:10:28.948941 [ 744.936437] device vif2.0 entered promiscuous mode Oct 3 20:10:28.960878 (XEN) d2v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 20:10:30.033787 (XEN) d2v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 20:10:30.045774 [ 746.546396] xen-blkback: backend/vbd/2/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 20:10:30.573773 [ 746.575682] xen-blkback: backend/vbd/2/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 20:10:30.597812 (XEN) common/grant_table.c:1909:d2v0 Expanding d2 grant table from 1 to 2 frames Oct 3 20:10:30.609797 [ 746.721320] vif vif-2-0 vif2.0: Guest Rx ready Oct 3 20:10:30.741807 [ 746.725548] IPv6: ADDRCONF(NETDEV_CHANGE): vif2.0: link becomes ready Oct 3 20:10:30.753811 [ 746.731260] xenbr0: port 2(vif2.0) entered blocking state Oct 3 20:10:30.753875 [ 746.736447] xenbr0: port 2(vif2.0) entered forwarding state Oct 3 20:10:30.765665 [ 789.538007] xenbr0: port 2(vif2.0) entered disabled state Oct 3 20:11:13.557775 [ 789.738514] xenbr0: port 2(vif2.0) entered disabled state Oct 3 20:11:13.761755 [ 789.744256] device vif2.0 left promiscuous mode Oct 3 20:11:13.761817 [ 789.747433] xenbr0: port 2(vif2.0) entered disabled state Oct 3 20:11:13.761905 [ 816.565212] xenbr0: port 2(vif3.0) entered blocking state Oct 3 20:11:40.588892 [ 816.569289] xenbr0: port 2(vif3.0) entered disabled state Oct 3 20:11:40.588892 [ 816.574900] device vif3.0 entered promiscuous mode Oct 3 20:11:40.600825 (XEN) d3v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 20:11:41.680737 (XEN) d3v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 20:11:41.689734 [ 818.710926] xen-blkback: backend/vbd/3/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 20:11:42.733743 [ 818.756402] xen-blkback: backend/vbd/3/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 20:11:42.781706 (XEN) common/grant_table.c:1909:d3v0 Expanding d3 grant table from 1 to 2 frames Oct 3 20:11:42.817726 [ 818.932230] vif vif-3-0 vif3.0: Guest Rx ready Oct 3 20:11:42.949765 [ 818.935352] IPv6: ADDRCONF(NETDEV_CHANGE): vif3.0: link becomes ready Oct 3 20:11:42.961725 [ 818.948439] xenbr0: port 2(vif3.0) entered blocking state Oct 3 20:11:42.961790 [ 818.952745] xenbr0: port 2(vif3.0) entered forwarding state Oct 3 20:11:42.973727 [ 861.052677] xenbr0: port 2(vif3.0) entered disabled state Oct 3 20:12:25.073107 [ 861.248540] xenbr0: port 2(vif3.0) entered disabled state Oct 3 20:12:25.264944 [ 861.253089] device vif3.0 left promiscuous mode Oct 3 20:12:25.276957 [ 861.257185] xenbr0: port 2(vif3.0) entered disabled state Oct 3 20:12:25.276992 [ 888.355296] xenbr0: port 2(vif4.0) entered blocking state Oct 3 20:12:52.381743 [ 888.359372] xenbr0: port 2(vif4.0) entered disabled state Oct 3 20:12:52.381816 [ 888.365003] device vif4.0 entered promiscuous mode Oct 3 20:12:52.381865 (XEN) d4v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 20:12:53.473743 (XEN) d4v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 20:12:53.485708 [ 890.254863] xen-blkback: backend/vbd/4/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 20:12:54.277747 [ 890.299949] xen-blkback: backend/vbd/4/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 20:12:54.325759 (XEN) common/grant_table.c:1909:d4v0 Expanding d4 grant table from 1 to 2 frames Oct 3 20:12:54.361746 [ 890.467423] vif vif-4-0 vif4.0: Guest Rx ready Oct 3 20:12:54.481714 [ 890.470637] IPv6: ADDRCONF(NETDEV_CHANGE): vif4.0: link becomes ready Oct 3 20:12:54.493753 [ 890.477148] xenbr0: port 2(vif4.0) entered blocking state Oct 3 20:12:54.493815 [ 890.482874] xenbr0: port 2(vif4.0) entered forwarding state Oct 3 20:12:54.505713 [ 932.978256] xenbr0: port 2(vif4.0) entered disabled state Oct 3 20:13:36.993781 [ 933.138730] xenbr0: port 2(vif4.0) entered disabled state Oct 3 20:13:37.161781 [ 933.143339] device vif4.0 left promiscuous mode Oct 3 20:13:37.161844 [ 933.147393] xenbr0: port 2(vif4.0) entered disabled state Oct 3 20:13:37.173689 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 20:13:37.605751 [ 960.043591] xenbr0: port 2(vif5.0) entered blocking state Oct 3 20:14:04.057741 [ 960.047624] xenbr0: port 2(vif5.0) entered disabled state Oct 3 20:14:04.069736 [ 960.053283] device vif5.0 entered promiscuous mode Oct 3 20:14:04.069790 (XEN) d5v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 20:14:05.145699 (XEN) d5v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 20:14:05.157704 [ 961.950596] xen-blkback: backend/vbd/5/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 20:14:05.973629 [ 961.995537] xen-blkback: backend/vbd/5/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 20:14:06.021626 (XEN) common/grant_table.c:1909:d5v0 Expanding d5 grant table from 1 to 2 frames Oct 3 20:14:06.045666 [ 962.108151] vif vif-5-0 vif5.0: Guest Rx ready Oct 3 20:14:06.129759 [ 962.111857] IPv6: ADDRCONF(NETDEV_CHANGE): vif5.0: link becomes ready Oct 3 20:14:06.129827 [ 962.117907] xenbr0: port 2(vif5.0) entered blocking state Oct 3 20:14:06.141728 [ 962.123234] xenbr0: port 2(vif5.0) entered forwarding state Oct 3 20:14:06.141822 [ 1011.492646] xenbr0: port 2(vif5.0) entered disabled state Oct 3 20:14:55.516840 [ 1011.678808] xenbr0: port 2(vif5.0) entered disabled state Oct 3 20:14:55.696906 [ 1011.683348] device vif5.0 left promiscuous mode Oct 3 20:14:55.708878 [ 1011.687454] xenbr0: port 2(vif5.0) entered disabled state Oct 3 20:14:55.708878 [ 1038.579269] xenbr0: port 2(vif6.0) entered blocking state Oct 3 20:15:22.596858 [ 1038.583299] xenbr0: port 2(vif6.0) entered disabled state Oct 3 20:15:22.608832 [ 1038.588961] device vif6.0 entered promiscuous mode Oct 3 20:15:22.608832 (XEN) d6v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 20:15:23.685668 (XEN) d6v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 20:15:23.709641 [ 1040.486854] xen-blkback: backend/vbd/6/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 20:15:24.501791 [ 1040.559345] xen-blkback: backend/vbd/6/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 20:15:24.573757 (XEN) common/grant_table.c:1909:d6v0 Expanding d6 grant table from 1 to 2 frames Oct 3 20:15:24.621719 [ 1040.708886] vif vif-6-0 vif6.0: Guest Rx ready Oct 3 20:15:24.729753 [ 1040.712122] IPv6: ADDRCONF(NETDEV_CHANGE): vif6.0: link becomes ready Oct 3 20:15:24.729820 [ 1040.718836] xenbr0: port 2(vif6.0) entered blocking state Oct 3 20:15:24.741713 [ 1040.728257] xenbr0: port 2(vif6.0) entered forwarding state Oct 3 20:15:24.741777 [ 1090.074353] xenbr0: port 2(vif6.0) entered disabled state Oct 3 20:16:14.097753 [ 1090.238622] xenbr0: port 2(vif6.0) entered disabled state Oct 3 20:16:14.253755 [ 1090.243564] device vif6.0 left promiscuous mode Oct 3 20:16:14.265754 [ 1090.247277] xenbr0: port 2(vif6.0) entered disabled state Oct 3 20:16:14.265817 [ 1117.018561] xenbr0: port 2(vif7.0) entered blocking state Oct 3 20:16:41.037760 [ 1117.022593] xenbr0: port 2(vif7.0) entered disabled state Oct 3 20:16:41.037832 [ 1117.028286] device vif7.0 entered promiscuous mode Oct 3 20:16:41.049677 (XEN) d7v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 20:16:42.129740 (XEN) d7v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 20:16:42.141699 [ 1118.699518] xen-blkback: backend/vbd/7/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 20:16:42.717819 [ 1118.735288] xen-blkback: backend/vbd/7/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 20:16:42.753744 (XEN) common/grant_table.c:1909:d7v0 Expanding d7 grant table from 1 to 2 frames Oct 3 20:16:42.765742 [ 1118.903611] vif vif-7-0 vif7.0: Guest Rx ready Oct 3 20:16:42.921750 [ 1118.906709] IPv6: ADDRCONF(NETDEV_CHANGE): vif7.0: link becomes ready Oct 3 20:16:42.933729 [ 1118.913390] xenbr0: port 2(vif7.0) entered blocking state Oct 3 20:16:42.933794 [ 1118.918706] xenbr0: port 2(vif7.0) entered forwarding state Oct 3 20:16:42.933845 [ 1168.433791] xenbr0: port 2(vif7.0) entered disabled state Oct 3 20:17:32.449688 [ 1168.608636] xenbr0: port 2(vif7.0) entered disabled state Oct 3 20:17:32.629713 [ 1168.613207] device vif7.0 left promiscuous mode Oct 3 20:17:32.629773 [ 1168.617278] xenbr0: port 2(vif7.0) entered disabled state Oct 3 20:17:32.641713 [ 1195.412663] xenbr0: port 2(vif8.0) entered blocking state Oct 3 20:17:59.429867 [ 1195.416699] xenbr0: port 2(vif8.0) entered disabled state Oct 3 20:17:59.429946 [ 1195.422389] device vif8.0 entered promiscuous mode Oct 3 20:17:59.441760 (XEN) d8v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 20:18:00.509701 (XEN) d8v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 20:18:00.521736 [ 1197.359707] xen-blkback: backend/vbd/8/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 20:18:01.373759 [ 1197.409536] xen-blkback: backend/vbd/8/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 20:18:01.433683 (XEN) common/grant_table.c:1909:d8v0 Expanding d8 grant table from 1 to 2 frames Oct 3 20:18:01.469733 [ 1197.597007] vif vif-8-0 vif8.0: Guest Rx ready Oct 3 20:18:01.613794 [ 1197.600352] IPv6: ADDRCONF(NETDEV_CHANGE): vif8.0: link becomes ready Oct 3 20:18:01.613861 [ 1197.606952] xenbr0: port 2(vif8.0) entered blocking state Oct 3 20:18:01.625740 [ 1197.612139] xenbr0: port 2(vif8.0) entered forwarding state Oct 3 20:18:01.625801 [ 1246.987111] xenbr0: port 2(vif8.0) entered disabled state Oct 3 20:18:51.009722 [ 1247.168718] xenbr0: port 2(vif8.0) entered disabled state Oct 3 20:18:51.189764 [ 1247.173099] device vif8.0 left promiscuous mode Oct 3 20:18:51.189826 [ 1247.177370] xenbr0: port 2(vif8.0) entered disabled state Oct 3 20:18:51.201675 [ 1273.983710] xenbr0: port 2(vif9.0) entered blocking state Oct 3 20:19:18.000891 [ 1273.987745] xenbr0: port 2(vif9.0) entered disabled state Oct 3 20:19:18.000891 [ 1273.993428] device vif9.0 entered promiscuous mode Oct 3 20:19:18.012836 (XEN) d9v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 20:19:19.088963 (XEN) d9v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 20:19:19.112883 [ 1275.962262] xen-blkback: backend/vbd/9/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 20:19:19.980868 [ 1276.083356] xen-blkback: backend/vbd/9/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 20:19:20.100884 (XEN) common/grant_table.c:1909:d9v0 Expanding d9 grant table from 1 to 2 frames Oct 3 20:19:20.148862 [ 1276.265624] vif vif-9-0 vif9.0: Guest Rx ready Oct 3 20:19:20.280884 [ 1276.269627] IPv6: ADDRCONF(NETDEV_CHANGE): vif9.0: link becomes ready Oct 3 20:19:20.292887 [ 1276.275457] xenbr0: port 2(vif9.0) entered blocking state Oct 3 20:19:20.292887 [ 1276.280805] xenbr0: port 2(vif9.0) entered forwarding state Oct 3 20:19:20.304818 [ 1325.419189] xenbr0: port 2(vif9.0) entered disabled state Oct 3 20:20:09.441445 [ 1325.618532] xenbr0: port 2(vif9.0) entered disabled state Oct 3 20:20:09.633504 [ 1325.623510] device vif9.0 left promiscuous mode Oct 3 20:20:09.645458 [ 1325.627188] xenbr0: port 2(vif9.0) entered disabled state Oct 3 20:20:09.645458 INIT: Id "T2" respawning too fast: disabled for 5 minutes Oct 3 20:20:18.377628 [ 1352.542008] xenbr0: port 2(vif10.0) entered blocking state Oct 3 20:20:36.561770 [ 1352.546128] xenbr0: port 2(vif10.0) entered disabled state Oct 3 20:20:36.561844 [ 1352.551887] device vif10.0 entered promiscuous mode Oct 3 20:20:36.573669 (XEN) d10v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 20:20:37.641744 (XEN) d10v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 20:20:37.665681 [ 1354.220665] xen-blkback: backend/vbd/10/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 20:20:38.241717 [ 1354.292129] xen-blkback: backend/vbd/10/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 20:20:38.313687 (XEN) common/grant_table.c:1909:d10v0 Expanding d10 grant table from 1 to 2 frames Oct 3 20:20:38.365995 [ 1354.464242] vif vif-10-0 vif10.0: Guest Rx ready Oct 3 20:20:38.485728 [ 1354.467598] IPv6: ADDRCONF(NETDEV_CHANGE): vif10.0: link becomes ready Oct 3 20:20:38.485762 [ 1354.474236] xenbr0: port 2(vif10.0) entered blocking state Oct 3 20:20:38.497864 [ 1354.479733] xenbr0: port 2(vif10.0) entered forwarding state Oct 3 20:20:38.497905 [ 1404.000211] xenbr0: port 2(vif10.0) entered disabled state Oct 3 20:21:28.021708 [ 1404.148650] xenbr0: port 2(vif10.0) entered disabled state Oct 3 20:21:28.165773 [ 1404.153271] device vif10.0 left promiscuous mode Oct 3 20:21:28.165836 [ 1404.157470] xenbr0: port 2(vif10.0) entered disabled state Oct 3 20:21:28.177743 [ 1431.080357] xenbr0: port 2(vif11.0) entered blocking state Oct 3 20:21:55.101770 [ 1431.084478] xenbr0: port 2(vif11.0) entered disabled state Oct 3 20:21:55.101848 [ 1431.090245] device vif11.0 entered promiscuous mode Oct 3 20:21:55.101898 (XEN) d11v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 20:21:56.181729 (XEN) d11v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 20:21:56.193723 [ 1433.060456] xen-blkback: backend/vbd/11/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 20:21:57.081760 [ 1433.224716] xen-blkback: backend/vbd/11/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 20:21:57.249685 (XEN) common/grant_table.c:1909:d11v0 Expanding d11 grant table from 1 to 2 frames Oct 3 20:21:57.345746 [ 1433.570614] vif vif-11-0 vif11.0: Guest Rx ready Oct 3 20:21:57.585770 [ 1433.573896] IPv6: ADDRCONF(NETDEV_CHANGE): vif11.0: link becomes ready Oct 3 20:21:57.597717 [ 1433.580646] xenbr0: port 2(vif11.0) entered blocking state Oct 3 20:21:57.597780 [ 1433.586020] xenbr0: port 2(vif11.0) entered forwarding state Oct 3 20:21:57.597830 [ 1482.893871] xenbr0: port 2(vif11.0) entered disabled state Oct 3 20:22:46.905692 [ 1483.099811] xenbr0: port 2(vif11.0) entered disabled state Oct 3 20:22:47.113721 [ 1483.104439] device vif11.0 left promiscuous mode Oct 3 20:22:47.113755 [ 1483.108664] xenbr0: port 2(vif11.0) entered disabled state Oct 3 20:22:47.125658 [ 1510.516995] xenbr0: port 2(vif12.0) entered blocking state Oct 3 20:23:14.525757 [ 1510.521157] xenbr0: port 2(vif12.0) entered disabled state Oct 3 20:23:14.537724 [ 1510.526849] device vif12.0 entered promiscuous mode Oct 3 20:23:14.537787 (XEN) d12v0 Unhandled SMC/HVC: 0x8600ff01 Oct 3 20:23:15.625627 (XEN) d12v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Oct 3 20:23:15.633606 [ 1512.415677] xen-blkback: backend/vbd/12/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 20:23:16.437722 [ 1512.486247] xen-blkback: backend/vbd/12/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Oct 3 20:23:16.497825 (XEN) common/grant_table.c:1909:d12v0 Expanding d12 grant table from 1 to 2 frames Oct 3 20:23:16.521735 [ 1512.656760] vif vif-12-0 vif12.0: Guest Rx ready Oct 3 20:23:16.665707 [ 1512.660381] IPv6: ADDRCONF(NETDEV_CHANGE): vif12.0: link becomes ready Oct 3 20:23:16.677768 [ 1512.666807] xenbr0: port 2(vif12.0) entered blocking state Oct 3 20:23:16.677819 [ 1512.672339] xenbr0: port 2(vif12.0) entered forwarding state Oct 3 20:23:16.689675 [ 1559.663620] xenbr0: port 2(vif12.0) entered disabled state Oct 3 20:24:03.669760 [ 1559.758860] xenbr0: port 2(vif12.0) entered disabled state Oct 3 20:24:03.765708 [ 1559.763580] device vif12.0 left promiscuous mode Oct 3 20:24:03.777731 [ 1559.767695] xenbr0: port 2(vif12.0) entered disabled state Oct 3 20:24:03.777794 Oct 3 20:24:23.425989 (XEN) *** Serial input to Xen (type 'CTRL-x' three times to switch input) Oct 3 20:24:23.449007 Oct 3 20:24:23.450369 Oct 3 20:24:24.419560 (XEN) '0' pressed -> dumping Dom0's registers Oct 3 20:24:24.441818 (XEN) *** Dumping Dom0 vcpu#0 state: *** Oct 3 20:24:24.441895 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Oct 3 20:24:24.444197 Not tainted ]---- Oct 3 20:24:24.453725 (XEN) CPU: 0 Oct 3 20:24:24.453778 (XEN) PC: c031ce28 Oct 3 20:24:24.453822 (XEN) CPSR: 600f0093 MODE:32-bit Guest SVC Oct 3 20:24:24.453869 (XEN) R0: 00000005 R1: 00000000 R2: 00539079 R3: c031ce20 Oct 3 20:24:24.465775 (XEN) R4: c1909d80 R5: c1b12200 R6: c1904d1c R7: c1904d78 Oct 3 20:24:24.465838 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c00 Oct 3 20:24:24.477761 (XEN) USR: SP: bed59970 LR: b6e246c5 Oct 3 20:24:24.477821 (XEN) SVC: SP: c1901f40 LR: c0308df0 SPSR:600f0013 Oct 3 20:24:24.477869 (XEN) ABT: SP: c1b22b10 LR: c03011c0 SPSR:600d0193 Oct 3 20:24:24.489720 (XEN) UND: SP: c1b22b20 LR: c0300fa0 SPSR:600d0093 Oct 3 20:24:24.489754 (XEN) IRQ: SP: c1b22b00 LR: c0300ba0 SPSR:600f0193 Oct 3 20:24:24.501776 (XEN) FIQ: SP: c1b22b30 LR: c1b22b30 SPSR:00000000 Oct 3 20:24:24.501838 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 20:24:24.501888 (XEN) Oct 3 20:24:24.513757 (XEN) SCTLR: 10c5387d Oct 3 20:24:24.513839 (XEN) TCR: 00000000 Oct 3 20:24:24.513885 (XEN) TTBR0: 0000000064ea406a Oct 3 20:24:24.513929 (XEN) TTBR1: 000000006020406a Oct 3 20:24:24.513971 (XEN) IFAR: b6e50814, IFSR: 00000007 Oct 3 20:24:24.525774 (XEN) DFAR: b6b4073b, DFSR: 00000017 Oct 3 20:24:24.525832 (XEN) Oct 3 20:24:24.525872 (XEN) VTCR_EL2: 80003558 Oct 3 20:24:24.525915 (XEN) VTTBR_EL2: 00010000bef8a000 Oct 3 20:24:24.537753 (XEN) Oct 3 20:24:24.537806 (XEN) SCTLR_EL2: 30cd187f Oct 3 20:24:24.537850 (XEN) HCR_EL2: 007c663f Oct 3 20:24:24.537893 (XEN) TTBR0_EL2: 000000004111d000 Oct 3 20:24:24.537936 (XEN) Oct 3 20:24:24.537974 (XEN) ESR_EL2: 07e00000 Oct 3 20:24:24.549761 (XEN) HPFAR_EL2: 00104810 Oct 3 20:24:24.549818 (XEN) HDFAR: e0807f00 Oct 3 20:24:24.549861 (XEN) HIFAR: c0a19dbc Oct 3 20:24:24.549903 (XEN) Oct 3 20:24:24.549941 (XEN) Guest stack trace from sp=c1901f40: Oct 3 20:24:24.561751 (XEN) Failed to convert stack to physical address Oct 3 20:24:24.561812 (XEN) *** Dumping Dom0 vcpu#1 state: *** Oct 3 20:24:24.561858 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 20:24:24.573761 (XEN) CPU: 0 Oct 3 20:24:24.573815 (XEN) PC: c031ce28 Oct 3 20:24:24.573857 (XEN) CPSR: 60030093 MODE:32-bit Guest SVC Oct 3 20:24:24.573903 (XEN) R0: 00000005 R1: 00000000 R2: 00320c39 R3: c031ce20 Oct 3 20:24:24.585759 (XEN) R4: c210e600 R5: c1b12200 R6: c1904d1c R7: c1904d78 Oct 3 20:24:24.585821 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c00 Oct 3 20:24:24.597761 (XEN) USR: SP: beeb6118 LR: b6a7306d Oct 3 20:24:24.597819 (XEN) SVC: SP: e08c9f90 LR: c0308df0 SPSR:60030013 Oct 3 20:24:24.597866 (XEN) ABT: SP: c1b22b50 LR: c0300ea0 SPSR:600f0193 Oct 3 20:24:24.609767 (XEN) UND: SP: c1b22b60 LR: c0300fa0 SPSR:60030093 Oct 3 20:24:24.609827 (XEN) IRQ: SP: c1b22b40 LR: c0300ba0 SPSR:60030193 Oct 3 20:24:24.621787 (XEN) FIQ: SP: c1b22b70 LR: c1b22b70 SPSR:00000000 Oct 3 20:24:24.621853 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Oct 3 20:24:24.633725 (XEN) Oct 3 20:24:24.633777 (XEN) SCTLR: 10c5387d Oct 3 20:24:24.633821 (XEN) TCR: 00000000 Oct 3 20:24:24.633863 (XEN) TTBR0: 000000006470006a Oct 3 20:24:24.633905 (XEN) TTBR1: 000000006020406a Oct 3 20:24:24.645762 (XEN) IFAR: b6e1a898, IFSR: 00000007 Oct 3 20:24:24.645822 (XEN) DFAR: 0056a318, DFSR: 0000081f Oct 3 20:24:24.645868 (XEN) Oct 3 20:24:24.645907 (XEN) VTCR_EL2: 80003558 Oct 3 20:24:24.645950 (XEN) VTTBR_EL2: 00010000bef8a000 Oct 3 20:24:24.657756 (XEN) Oct 3 20:24:24.657810 (XEN) SCTLR_EL2: 30cd187f Oct 3 20:24:24.657854 (XEN) HCR_EL2: 007c663f Oct 3 20:24:24.657896 (XEN) TTBR0_EL2: 000000004111d000 Oct 3 20:24:24.657939 (XEN) Oct 3 20:24:24.657977 (XEN) ESR_EL2: 07e00000 Oct 3 20:24:24.669765 (XEN) HPFAR_EL2: 00104810 Oct 3 20:24:24.669821 (XEN) HDFAR: e0807f00 Oct 3 20:24:24.669864 (XEN) HIFAR: c0a19dbc Oct 3 20:24:24.669906 (XEN) Oct 3 20:24:24.669945 (XEN) Guest stack trace from sp=e08c9f90: Oct 3 20:24:24.681717 (XEN) Failed to convert stack to physical address Oct 3 20:24:24.681778 Oct 3 20:24:26.414574 (XEN) 'H' pressed -> dumping heap info (now = 1587712268333) Oct 3 20:24:26.433847 (XEN) heap[node=0][zone=0] -> 16279 pages Oct 3 20:24:26.433906 (XEN) heap[node=0][zone=1] -> 0 Oct 3 20:24:26.436220 pages Oct 3 20:24:26.445693 (XEN) heap[node=0][zone=2] -> 0 pages Oct 3 20:24:26.445724 (XEN) heap[node=0][zone=3] -> 0 pages Oct 3 20:24:26.445749 (XEN) heap[node=0][zone=4] -> 0 pages Oct 3 20:24:26.445772 (XEN) heap[node=0][zone=5] -> 0 pages Oct 3 20:24:26.457815 (XEN) heap[node=0][zone=6] -> 0 pages Oct 3 20:24:26.457873 (XEN) heap[node=0][zone=7] -> 0 pages Oct 3 20:24:26.457918 (XEN) heap[node=0][zone=8] -> 0 pages Oct 3 20:24:26.469799 (XEN) heap[node=0][zone=9] -> 0 pages Oct 3 20:24:26.469855 (XEN) heap[node=0][zone=10] -> 0 pages Oct 3 20:24:26.469900 (XEN) heap[node=0][zone=11] -> 0 pages Oct 3 20:24:26.469943 (XEN) heap[node=0][zone=12] -> 0 pages Oct 3 20:24:26.481777 (XEN) heap[node=0][zone=13] -> 0 pages Oct 3 20:24:26.481835 (XEN) heap[node=0][zone=14] -> 0 pages Oct 3 20:24:26.481880 (XEN) heap[node=0][zone=15] -> 0 pages Oct 3 20:24:26.493774 (XEN) heap[node=0][zone=16] -> 0 pages Oct 3 20:24:26.493833 (XEN) heap[node=0][zone=17] -> 0 pages Oct 3 20:24:26.493878 (XEN) heap[node=0][zone=18] -> 0 pages Oct 3 20:24:26.493922 (XEN) heap[node=0][zone=19] -> 130813 pages Oct 3 20:24:26.505759 (XEN) heap[node=0][zone=20] -> 241606 pages Oct 3 20:24:26.505818 (XEN) heap[node=0][zone=21] -> 0 pages Oct 3 20:24:26.505871 (XEN) heap[node=0][zone=22] -> 0 pages Oct 3 20:24:26.517753 (XEN) heap[node=0][zone=23] -> 0 pages Oct 3 20:24:26.517812 (XEN) heap[node=0][zone=24] -> 0 pages Oct 3 20:24:26.517856 (XEN) heap[node=0][zone=25] -> 0 pages Oct 3 20:24:26.529746 (XEN) heap[node=0][zone=26] -> 0 pages Oct 3 20:24:26.529805 (XEN) heap[node=0][zone=27] -> 0 pages Oct 3 20:24:26.529851 (XEN) heap[node=0][zone=28] -> 0 pages Oct 3 20:24:26.529894 Oct 3 20:24:28.392386 Oct 3 20:24:30.191076 Oct 3 20:24:30.429602 Oct 3 20:24:32.200252 Oct 3 20:24:32.429305 (XEN) Dumping timer queues: Oct 3 20:24:32.452938 (XEN) CPU00: Oct 3 20:24:32.452938 (XEN) ex= 229991us timer=43fdc968 cb=arch/arm/vtimer.c#virt_timer_expired(43fdc960) Oct 3 20:24:32.452938 ( Oct 3 20:24:32.455214 XEN) CPU01: Oct 3 20:24:32.464764 (XEN) ex= 25408us timer=43fee968 cb=arch/arm/vtimer.c#virt_timer_expired(43fee960) Oct 3 20:24:32.464764 Oct 3 20:24:34.402325 Oct 3 20:24:36.211618 Oct 3 20:24:36.410629 (XEN) 'd' pressed -> dumping registers Oct 3 20:24:36.430458 (XEN) Oct 3 20:24:36.430488 (XEN) *** Dumping CPU0 host state: *** Oct 3 20:24:36.430513 (XEN) ----[ Xen-4.20- Oct 3 20:24:36.431576 unstable arm32 debug=y Not tainted ]---- Oct 3 20:24:36.442967 (XEN) CPU: 0 Oct 3 20:24:36.442997 (XEN) PC: 00269e8c arch/arm/domain.c#idle_loop+0x134/0x1b0 Oct 3 20:24:36.443024 (XEN) CPSR: 6007005a MODE:Hypervisor Oct 3 20:24:36.456780 (XEN) R0: 00000000 R1: 00000001 R2: 00000000 R3: 00000000 Oct 3 20:24:36.456780 (XEN) R4: 00000000 R5: 00310108 R6: 0034333c R7: 00000001 Oct 3 20:24:36.456780 (XEN) R8: 00340108 R9: 00000000 R10:40e00000 R11:4003ff54 R12:fffffffc Oct 3 20:24:36.468419 (XEN) HYP: SP: 4003ff44 LR: 0022c2d0 Oct 3 20:24:36.468419 (XEN) Oct 3 20:24:36.468419 (XEN) VTCR_EL2: 80003558 Oct 3 20:24:36.480766 (XEN) VTTBR_EL2: 00010000bef8a000 Oct 3 20:24:36.480766 (XEN) Oct 3 20:24:36.480766 (XEN) SCTLR_EL2: 30cd187f Oct 3 20:24:36.480766 (XEN) HCR_EL2: 007c663f Oct 3 20:24:36.480766 (XEN) TTBR0_EL2: 000000004111d000 Oct 3 20:24:36.492737 (XEN) Oct 3 20:24:36.492737 (XEN) ESR_EL2: 07e00000 Oct 3 20:24:36.492737 (XEN) HPFAR_EL2: 00104810 Oct 3 20:24:36.492737 (XEN) HDFAR: e0807f00 Oct 3 20:24:36.492737 (XEN) HIFAR: c0a19dbc Oct 3 20:24:36.492737 (XEN) Oct 3 20:24:36.492737 (XEN) Xen stack trace from sp=4003ff44: Oct 3 20:24:36.504710 (XEN) 07e00000 002ac008 002a102c 4003ff4c 00272664 00000000 00000000 00000000 Oct 3 20:24:36.504710 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 20:24:36.516756 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 20:24:36.528779 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 20:24:36.528779 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 20:24:36.540743 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 20:24:36.540743 (XEN) Xen call trace: Oct 3 20:24:36.540743 (XEN) [<00269e8c>] arch/arm/domain.c#idle_loop+0x134/0x1b0 (PC) Oct 3 20:24:36.552780 (XEN) [<0022c2d0>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 20:24:36.552780 (XEN) [<00272664>] arch_get_xen_caps+0/0x90 Oct 3 20:24:36.564786 (XEN) Oct 3 20:24:36.564786 (XEN) *** Dumping CPU1 host state: *** Oct 3 20:24:36.564786 (XEN) ----[ Xen-4.20-unstable arm32 debug=y Not tainted ]---- Oct 3 20:24:36.564786 (XEN) CPU: 1 Oct 3 20:24:36.576764 (XEN) PC: 00269e8c arch/arm/domain.c#idle_loop+0x134/0x1b0 Oct 3 20:24:36.576764 (XEN) CPSR: 600f005a MODE:Hypervisor Oct 3 20:24:36.576764 (XEN) R0: 00000000 R1: 00000001 R2: 3fcf6000 R3: 00000000 Oct 3 20:24:36.588771 (XEN) R4: 00000001 R5: 00310108 R6: 0034333c R7: 00000002 Oct 3 20:24:36.588771 (XEN) R8: 00340108 R9: 00000001 R10:40e00000 R11:4000ff54 R12:fffffffc Oct 3 20:24:36.600745 (XEN) HYP: SP: 4000ff44 LR: 0022c2d0 Oct 3 20:24:36.600745 (XEN) Oct 3 20:24:36.600745 (XEN) VTCR_EL2: 80003558 Oct 3 20:24:36.600745 (XEN) VTTBR_EL2: 00010000bef8a000 Oct 3 20:24:36.612739 (XEN) Oct 3 20:24:36.612739 (XEN) SCTLR_EL2: 30cd187f Oct 3 20:24:36.612739 (XEN) HCR_EL2: 007c663f Oct 3 20:24:36.612739 (XEN) TTBR0_EL2: 00000000ba004000 Oct 3 20:24:36.612739 (XEN) Oct 3 20:24:36.612739 (XEN) ESR_EL2: 07e00000 Oct 3 20:24:36.624734 (XEN) HPFAR_EL2: 00104810 Oct 3 20:24:36.624734 (XEN) HDFAR: e0807f00 Oct 3 20:24:36.624734 (XEN) HIFAR: c0a19dbc Oct 3 20:24:36.624734 (XEN) Oct 3 20:24:36.624734 (XEN) Xen stack trace from sp=4000ff44: Oct 3 20:24:36.636738 (XEN) 07e00000 00311390 00000001 4000ff3c 00272f48 00000000 00000000 00000000 Oct 3 20:24:36.636738 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 20:24:36.648742 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 20:24:36.648742 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 20:24:36.657648 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 20:24:36.657682 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Oct 3 20:24:36.669644 (XEN) Xen call trace: Oct 3 20:24:36.669683 (XEN) [<00269e8c>] arch/arm/domain.c#idle_loop+0x134/0x1b0 (PC) Oct 3 20:24:36.684811 (XEN) [<0022c2d0>] rcu_needs_cpu+0x40/0x60 (LR) Oct 3 20:24:36.684811 (XEN) [<00272f48>] start_secondary+0x208/0x20c Oct 3 20:24:36.684811 (XEN) Oct 3 20:24:36.684811 Oct 3 20:24:38.441030 (XEN) 'e' pressed -> dumping event-channel info Oct 3 20:24:38.464806 (XEN) Event channel information for domain 0: Oct 3 20:24:38.464942 (XEN) Polling vCPUs: {} Oct 3 20:24:38.464988 (XEN) port Oct 3 20:24:38.467329 [p/m/s] Oct 3 20:24:38.476784 (XEN) 1 [0/0/ - ]: s=3 n=1 x=0 d=0 p=4 Oct 3 20:24:38.476784 (XEN) 2 [0/0/ - ]: s=5 n=0 x=0 v=2 Oct 3 20:24:38.476784 (XEN) 3 [0/0/ - ]: s=5 n=1 x=0 v=3 Oct 3 20:24:38.488802 (XEN) 4 [0/0/ - ]: s=3 n=0 x=0 d=0 p=1 Oct 3 20:24:38.488802 Oct 3 20:24:40.432558 (XEN) gnttab_usage_print_all [ key 'g' pressed Oct 3 20:24:40.448943 (XEN) -------- active -------- -------- shared -------- Oct 3 20:24:40.448943 (XEN) [ref] localdom mfn pin Oct 3 20:24:40.451612 localdom gmfn flags Oct 3 20:24:40.458413 (XEN) grant-table for remote d0 (v1) Oct 3 20:24:40.458413 (XEN) 1 frames (64 max), 4 maptrack frames (1024 max) Oct 3 20:24:40.458413 (XEN) no active grant table entries Oct 3 20:24:40.473005 (XEN) gnttab_usage_print_all ] done Oct 3 20:24:40.473074 Oct 3 20:24:42.441536 Oct 3 20:24:44.230692 Oct 3 20:24:44.442078 (XEN) Physical memory information: Oct 3 20:24:44.459631 (XEN) Xen heap: 65116kB free Oct 3 20:24:44.459661 (XEN) heap[19]: 523252kB free Oct 3 20:24:44.459686 (XEN) heap[20 Oct 3 20:24:44.460866 ]: 966424kB free Oct 3 20:24:44.472691 (XEN) Dom heap: 1489676kB free Oct 3 20:24:44.472691 Oct 3 20:24:46.456767 Oct 3 20:24:48.239260 Oct 3 20:24:48.472835 (XEN) sched_smt_power_savings: disabled Oct 3 20:24:48.489899 (XEN) NOW=1609768463208 Oct 3 20:24:48.489957 (XEN) Online Cpus: 0-1 Oct 3 20:24:48.490000 (XEN) Cpupool 0: Oct 3 20:24:48.490041 (XEN) Cpus: 0-1 Oct 3 20:24:48.490080 (XEN) Sched Oct 3 20:24:48.492389 uling granularity: cpu, 1 CPU per sched-resource Oct 3 20:24:48.501709 (XEN) Scheduler: SMP Credit Scheduler rev2 (credit2) Oct 3 20:24:48.501765 (XEN) Active queues: 1 Oct 3 20:24:48.501808 (XEN) default-weight = 256 Oct 3 20:24:48.513821 (XEN) Runqueue 0: Oct 3 20:24:48.513876 (XEN) ncpus = 2 Oct 3 20:24:48.513920 (XEN) cpus = 0-1 Oct 3 20:24:48.513962 (XEN) max_weight = 256 Oct 3 20:24:48.525748 (XEN) pick_bias = 0 Oct 3 20:24:48.525807 (XEN) instload = 0 Oct 3 20:24:48.525852 (XEN) aveload = 1215 (~0%) Oct 3 20:24:48.525895 (XEN) idlers: 2 Oct 3 20:24:48.525935 (XEN) tickled: 0 Oct 3 20:24:48.537737 (XEN) fully idle cores: 2 Oct 3 20:24:48.537795 (XEN) Domain info: Oct 3 20:24:48.537838 (XEN) Domain: 0 w 256 c 0 v 2 Oct 3 20:24:48.537882 (XEN) 1: [0.0] flags=0 cpu=1 credit=8222488 [w=256] load=1089 (~0%) Oct 3 20:24:48.549741 (XEN) 2: [0.1] flags=0 cpu=0 credit=10165000 [w=256] load=140 (~0%) Oct 3 20:24:48.549806 (XEN) Runqueue 0: Oct 3 20:24:48.549849 (XEN) CPU[00] runq=0, sibling={0}, core={0-1} Oct 3 20:24:48.561795 (XEN) CPU[01] runq=0, sibling={1}, core={0-1} Oct 3 20:24:48.561856 (XEN) RUNQ: Oct 3 20:24:48.561896 (XEN) CPUs info: Oct 3 20:24:48.561937 (XEN) CPU[00] current=d[IDLE]v0, curr=d[IDLE]v0, prev=NULL Oct 3 20:24:48.573718 (XEN) CPU[01] current=d[IDLE]v1, curr=d[IDLE]v1, prev=NULL Oct 3 20:24:48.573779 Oct 3 20:24:50.481523 Oct 3 20:24:52.248072 Oct 3 20:24:52.448712 (XEN) Synced stime skew: max=125ns avg=125ns samples=1 current=125ns Oct 3 20:24:52.473877 (XEN) Synced cycles skew: max=3 avg=3 samples=1 current=3 Oct 3 20:24:52.473938 Oct 3 20:24:52.475492 Oct 3 20:24:54.472610 Oct 3 20:24:56.255942 Oct 3 20:24:56.466112 Oct 3 20:24:58.261640 Oct 3 20:24:58.471433 Oct 3 20:25:00.266752 Oct 3 20:25:10.469447 (XEN) 'q' pressed -> dumping domain info (now = 1631769604458) Oct 3 20:25:10.493911 (XEN) General information for domain 0: Oct 3 20:25:10.493911 (XEN) refcnt=3 dying=0 paus Oct 3 20:25:10.496221 e_count=0 Oct 3 20:25:10.505716 (XEN) nr_pages=131072 xenheap_pages=2 dirty_cpus={} max_pages=131072 Oct 3 20:25:10.505716 (XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=00000020 Oct 3 20:25:10.517937 (XEN) p2m mappings for domain 0 (vmid 1): Oct 3 20:25:10.517999 (XEN) 1G mappings: 0 (shattered 0) Oct 3 20:25:10.518044 (XEN) 2M mappings: 236 (shattered 20) Oct 3 20:25:10.529884 (XEN) 4K mappings: 5273 Oct 3 20:25:10.529942 (XEN) Rangesets belonging to domain 0: Oct 3 20:25:10.529987 (XEN) Interrupts { 32-72, 74, 77-79, 82-84, 86, 88-100, 103-104, 107-110, 114, 116-120, 123, 126-128, 138, 144, 146-147, 149-151, 156 } Oct 3 20:25:10.541926 (XEN) I/O Memory { 2020-2050, 3810-3811, 3830-3831, 3860-3861, 10000-10001, 10010-10045, 10050-10055, 10060-10061, 101b0-101b1, 101d0-101d1, 101e0-101e1, 10440-10441, 10800-10801, 10830-10831, 10850-10851, 10a60-10a61, 10d10-10d11, 11000-11010, 11200-11201, 11210-11211, 11400-11401, 11800-11805, 11c00-11c01, 11c10-11c11, 11d40-11d41, 11f20-11f21, 12000-12010, 12100-12101, 12110-12111, 12120-12121, 12130-12131, 12170-12171, 121a0-121a1, 121b0-121b1, 121d0-121d1, 12200-12201, 12210-12211, 12220-12221, 12230-12231, 12250-12251, 122f0-122f1, 12c00-12c01, 12c10-12c11, 12c30-12c31, 12c60-12c61, 12c70-12c71, 12c80-12c81, 12c90-12c91, 12ca0-12ca1, 12cb0-12cb1, 12cc0-12cc1, 12cd0-12cd1, 12ce0-12ce1, 12d10-12d11, 12d20-12d21, 12d30-12d31, 12d40-12d41, 12d60-12d61, 12d70-12d71, 12dd0-12dd1, 13260-13261, 13270-13271, 13280-13281, 13290-13291, 132a0-132a1, 132b0-132b1, 132c0-132c1, 132d0-132d1, 132e0-132e1, 132f0-132f1, 13400-13401, 13c40-13c41, 13c50-13c51, 13e00-13e01, 13e10-13e11, 13e20-13e21, 13e30-13e31, 13e80-13e81, 13e90-13e91, 13ea0-13ea1, 13eb0-13eb1, 14400-14440, 14450-14460, 14500-14510, 14530-145a0, 145b0-145b1, 14640-14641, 14650-14651 } Oct 3 20:25:10.637806 (XEN) NODE affinity for domain 0: [0] Oct 3 20:25:10.649805 (XEN) VCPU information and callbacks for domain 0: Oct 3 20:25:10.649805 (XEN) UNIT0 affinities: hard={0-1} soft={0-1} Oct 3 20:25:10.649847 (XEN) VCPU0: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 20:25:10.661808 (XEN) pause_count=0 pause_flags=1 Oct 3 20:25:10.661808 (XEN) GICH_LRs (vcpu 0) mask=0 Oct 3 20:25:10.661849 (XEN) VCPU_LR[0]=0 Oct 3 20:25:10.673797 (XEN) VCPU_LR[1]=0 Oct 3 20:25:10.673797 (XEN) VCPU_LR[2]=0 Oct 3 20:25:10.673823 (XEN) VCPU_LR[3]=0 Oct 3 20:25:10.673864 (XEN) No periodic timer Oct 3 20:25:10.673905 (XEN) UNIT1 affinities: hard={0-1} soft={0-1} Oct 3 20:25:10.685819 (XEN) VCPU1: CPU0 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Oct 3 20:25:10.685827 (XEN) pause_count=0 pause_flags=1 Oct 3 20:25:10.685873 (XEN) GICH_LRs (vcpu 1) mask=0 Oct 3 20:25:10.697805 (XEN) VCPU_LR[0]=0 Oct 3 20:25:10.697805 (XEN) VCPU_LR[1]=0 Oct 3 20:25:10.697842 (XEN) VCPU_LR[2]=0 Oct 3 20:25:10.697883 (XEN) VCPU_LR[3]=0 Oct 3 20:25:10.697924 (XEN) No periodic timer Oct 3 20:25:10.709779 (XEN) Notifying guest 0:0 (virq 1, port 0) Oct 3 20:25:10.709779 (XEN) Notifying guest 0:1 (virq 1, port 0) Oct 3 20:25:10.709815 Oct 3 20:25:22.509573 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Oct 3 20:25:22.525801 Oct 3 20:25:22.525835 arndale-westfield login: Oct 3 20:25:22.527807