[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.0-20-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.85-1 (2024-04-11) [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=30c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Cubietech Cubietruck [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000048600000, size 96 MiB [ 0.000000] OF: reserved mem: initialized node default-pool, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 18 pages/cpu s44756 r8192 d20780 u73728 [ 0.000000] pcpu-alloc: s44756 r8192 d20780 u73728 alloc=18*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 [ 0.000000] Kernel command line: ro root=/dev/mapper/cubietruck--braque--vg-root console=ttyS0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.000000] Memory: 1933504K/2097152K available (12288K kernel code, 1714K rwdata, 3744K rodata, 2048K init, 382K bss, 65344K reserved, 98304K cma-reserved, 1310720K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] ftrace: allocating 39967 entries in 118 pages [ 0.000000] ftrace: allocated 118 pages with 5 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000016] Switching to timer-based delay loop, resolution 41ns [ 0.001574] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.002618] Can't get timer clock [ 0.003518] Console: colour dummy device 80x30 [ 0.003604] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.003626] CPU: Testing write buffer coherency: ok [ 0.003699] pid_max: default: 32768 minimum: 301 [ 0.004255] LSM: Security Framework initializing [ 0.004360] landlock: Up and running. [ 0.004365] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.004646] AppArmor: AppArmor initialized [ 0.004662] TOMOYO Linux initialized [ 0.004705] LSM support for eBPF active [ 0.005046] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.005078] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.007518] /cpus/cpu@0 missing clock-frequency property [ 0.007571] /cpus/cpu@1 missing clock-frequency property [ 0.007584] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.009096] cblist_init_generic: Setting adjustable number of callback queues. [ 0.009114] cblist_init_generic: Setting shift to 1 and lim to 1. [ 0.009297] cblist_init_generic: Setting adjustable number of callback queues. [ 0.009307] cblist_init_generic: Setting shift to 1 and lim to 1. [ 0.009558] Setting up static identity map for 0x40400000 - 0x404000ac [ 0.010840] rcu: Hierarchical SRCU implementation. [ 0.010854] rcu: Max phase no-delay instances is 1000. [ 0.013417] EFI services will not be available. [ 0.014248] smp: Bringing up secondary CPUs ... [ 0.015628] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.015870] smp: Brought up 1 node, 2 CPUs [ 0.015888] SMP: Total of 2 processors activated (96.00 BogoMIPS). [ 0.015899] CPU: All CPU(s) started in HYP mode. [ 0.015903] CPU: Virtualization extensions available. [ 0.018014] devtmpfs: initialized [ 0.027181] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4 [ 0.027582] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.027631] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.033047] pinctrl core: initialized pinctrl subsystem [ 0.034362] DMI not present or invalid. [ 0.035450] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.037635] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.038907] audit: initializing netlink subsys (disabled) [ 0.039441] audit: type=2000 audit(0.036:1): state=initialized audit_enabled=0 res=1 [ 0.041189] thermal_sys: Registered thermal governor 'fair_share' [ 0.041205] thermal_sys: Registered thermal governor 'bang_bang' [ 0.041210] thermal_sys: Registered thermal governor 'step_wise' [ 0.041215] thermal_sys: Registered thermal governor 'user_space' [ 0.041220] thermal_sys: Registered thermal governor 'power_allocator' [ 0.041474] No ATAGs? [ 0.041640] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.041657] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.043137] Serial: AMBA PL011 UART driver [ 0.051344] platform 1c0c000.lcd-controller: Fixed dependency cycle(s) with /soc/hdmi@1c16000 [ 0.051429] platform 1c0c000.lcd-controller: Fixed dependency cycle(s) with /soc/display-backend@1e40000 [ 0.051498] platform 1c0c000.lcd-controller: Fixed dependency cycle(s) with /soc/display-backend@1e60000 [ 0.051900] platform 1c0d000.lcd-controller: Fixed dependency cycle(s) with /soc/hdmi@1c16000 [ 0.051969] platform 1c0d000.lcd-controller: Fixed dependency cycle(s) with /soc/display-backend@1e40000 [ 0.052034] platform 1c0d000.lcd-controller: Fixed dependency cycle(s) with /soc/display-backend@1e60000 [ 0.054918] platform 1c0d000.lcd-controller: Fixed dependency cycle(s) with /soc/hdmi@1c16000 [ 0.055069] platform 1c0c000.lcd-controller: Fixed dependency cycle(s) with /soc/hdmi@1c16000 [ 0.055266] platform 1c16000.hdmi: Fixed dependency cycle(s) with /soc/lcd-controller@1c0d000 [ 0.055429] platform 1c16000.hdmi: Fixed dependency cycle(s) with /soc/lcd-controller@1c0c000 [ 0.058670] platform 1c20800.pinctrl: Fixed dependency cycle(s) with /soc/pinctrl@1c20800/clk-out-a-pin [ 0.064626] platform 1e00000.display-frontend: Fixed dependency cycle(s) with /soc/display-backend@1e40000 [ 0.064702] platform 1e00000.display-frontend: Fixed dependency cycle(s) with /soc/display-backend@1e60000 [ 0.065185] platform 1e20000.display-frontend: Fixed dependency cycle(s) with /soc/display-backend@1e40000 [ 0.065246] platform 1e20000.display-frontend: Fixed dependency cycle(s) with /soc/display-backend@1e60000 [ 0.065724] platform 1e20000.display-frontend: Fixed dependency cycle(s) with /soc/display-backend@1e40000 [ 0.065869] platform 1e00000.display-frontend: Fixed dependency cycle(s) with /soc/display-backend@1e40000 [ 0.066012] platform 1c0d000.lcd-controller: Fixed dependency cycle(s) with /soc/display-backend@1e40000 [ 0.066124] platform 1c0c000.lcd-controller: Fixed dependency cycle(s) with /soc/display-backend@1e40000 [ 0.066254] platform 1e40000.display-backend: Fixed dependency cycle(s) with /soc/lcd-controller@1c0d000 [ 0.066357] platform 1e40000.display-backend: Fixed dependency cycle(s) with /soc/lcd-controller@1c0c000 [ 0.066478] platform 1e40000.display-backend: Fixed dependency cycle(s) with /soc/display-frontend@1e20000 [ 0.066601] platform 1e40000.display-backend: Fixed dependency cycle(s) with /soc/display-frontend@1e00000 [ 0.067115] platform 1e20000.display-frontend: Fixed dependency cycle(s) with /soc/display-backend@1e60000 [ 0.067252] platform 1e00000.display-frontend: Fixed dependency cycle(s) with /soc/display-backend@1e60000 [ 0.067357] platform 1c0d000.lcd-controller: Fixed dependency cycle(s) with /soc/display-backend@1e60000 [ 0.067518] platform 1c0c000.lcd-controller: Fixed dependency cycle(s) with /soc/display-backend@1e60000 [ 0.067623] platform 1e60000.display-backend: Fixed dependency cycle(s) with /soc/lcd-controller@1c0d000 [ 0.067721] platform 1e60000.display-backend: Fixed dependency cycle(s) with /soc/lcd-controller@1c0c000 [ 0.067877] platform 1e60000.display-backend: Fixed dependency cycle(s) with /soc/display-frontend@1e20000 [ 0.068009] platform 1e60000.display-backend: Fixed dependency cycle(s) with /soc/display-frontend@1e00000 [ 0.071262] platform 1c16000.hdmi: Fixed dependency cycle(s) with /hdmi-connector [ 0.071448] platform hdmi-connector: Fixed dependency cycle(s) with /soc/hdmi@1c16000 [ 0.080051] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.085651] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.085672] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.094414] iommu: Default domain type: Translated [ 0.094434] iommu: DMA domain TLB invalidation policy: strict mode [ 0.095962] pps_core: LinuxPPS API ver. 1 registered [ 0.095980] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.096005] PTP clock support registered [ 0.098393] NetLabel: Initializing [ 0.098411] NetLabel: domain hash size = 128 [ 0.098421] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.098523] NetLabel: unlabeled traffic allowed by default [ 0.098978] vgaarb: loaded [ 0.100387] clocksource: Switched to clocksource arch_sys_counter [ 0.101459] VFS: Disk quotas dquot_6.6.0 [ 0.101718] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.102975] AppArmor: AppArmor Filesystem Enabled [ 0.120242] NET: Registered PF_INET protocol family [ 0.120816] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.123844] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.124033] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.124085] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.124239] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.124657] TCP: Hash tables configured (established 8192 bind 8192) [ 0.125270] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.125531] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.125614] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.126086] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.126159] NET: Registered PF_XDP protocol family [ 0.126181] PCI: CLS 0 bytes, default 64 [ 0.127073] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. [ 0.127137] Trying to unpack rootfs image as initramfs... [ 0.138180] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.227800] Initialise system trusted keyrings [ 0.227928] Key type blacklist registered [ 0.236727] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 0.247188] zbud: loaded [ 0.250373] integrity: Platform Keyring initialized [ 0.250496] integrity: Machine keyring initialized [ 0.250513] Key type asymmetric registered [ 0.250533] Asymmetric key parser 'x509' registered [ 3.237253] Freeing initrd memory: 25112K [ 3.282170] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 3.282698] bounce: pool size: 64 pages [ 3.283032] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 3.283509] io scheduler mq-deadline registered [ 3.321101] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 3.325075] Serial: AMBA driver [ 3.326869] STM32 USART driver initialized [ 3.331099] mousedev: PS/2 mouse device common for all mice [ 3.334483] sunxi-rtc 1c20d00.rtc: registered as rtc0 [ 3.334541] sunxi-rtc 1c20d00.rtc: setting system clock to 2024-04-23T18:07:38 UTC (1713895658) [ 3.338308] ledtrig-cpu: registered to indicate activity on CPUs [ 3.342155] NET: Registered PF_INET6 protocol family [ 3.385649] Segment Routing with IPv6 [ 3.385777] In-situ OAM (IOAM) with IPv6 [ 3.385910] mip6: Mobile IPv6 [ 3.385947] NET: Registered PF_PACKET protocol family [ 3.386295] mpls_gso: MPLS GSO support [ 3.386422] ThumbEE CPU extension supported. [ 3.386442] Registering SWP/SWPB emulation handler [ 3.387191] registered taskstats version 1 [ 3.387247] Loading compiled-in X.509 certificates [ 4.275383] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.275559] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 4.277436] zswap: loaded using pool lzo/zbud [ 4.278704] Key type .fscrypt registered [ 4.278722] Key type fscrypt-provisioning registered [ 4.319248] Key type encrypted registered [ 4.319289] AppArmor: AppArmor sha1 policy hashing enabled [ 4.319379] ima: No TPM chip found, activating TPM-bypass! [ 4.319391] ima: Allocated hash algorithm: sha256 [ 4.319468] ima: No architecture policies found [ 4.319553] evm: Initialising EVM extended attributes: [ 4.319559] evm: security.selinux [ 4.319566] evm: security.SMACK64 (disabled) [ 4.319570] evm: security.SMACK64EXEC (disabled) [ 4.319574] evm: security.SMACK64TRANSMUTE (disabled) [ 4.319578] evm: security.SMACK64MMAP (disabled) [ 4.319582] evm: security.apparmor [ 4.319586] evm: security.ima [ 4.319589] evm: security.capability [ 4.319593] evm: HMAC attrs: 0x1 [ 5.445184] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pi not found, using dummy regulator [ 5.447800] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 5.449729] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator [ 5.450723] printk: console [ttyS0] disabled [ 5.470984] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 69, base_baud = 1500000) is a U6_16550A [ 6.823470] printk: console [ttyS0] enabled [ 6.850529] 1c28800.serial: ttyS1 at MMIO 0x1c28800 (irq = 70, base_baud = 1500000) is a U6_16550A [ 6.859872] serial serial0: tty port ttyS1 registered [ 6.866311] sun4i-pinctrl 1c20800.pinctrl: supply vcc-ph not found, using dummy regulator [ 6.889925] Freeing unused kernel image (initmem) memory: 2048K [ 6.898221] Checked W+X mappings: passed, no W+X pages found [ 6.904082] Run /init as init process [ 6.907813] with arguments: [ 6.907825] /init [ 6.907833] with environment: [ 6.907839] HOME=/ [ 6.907845] TERM=linux [ 8.320833] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator [ 8.338991] sunxi-mmc 1c12000.mmc: allocated mmc-pwrseq [ 8.344510] usbcore: registered new interface driver usbfs [ 8.350324] usbcore: registered new interface driver hub [ 8.355907] usbcore: registered new device driver usb [ 8.380794] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 8.428512] sunxi-mmc 1c12000.mmc: initialized, max. request size: 16384 KB [ 8.428757] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB [ 8.485133] mmc0: new high speed SDIO card at address 0001 [ 8.497526] mmc1: host does not support reading read-only switch, assuming write-enable [ 8.575940] axp20x-i2c 0-0034: AXP20x variant AXP209 found [ 8.587413] SCSI subsystem initialized [ 8.608582] mmc1: new high speed SDHC card at address 1234 [ 8.616193] axp20x-i2c 0-0034: mask_invert=true is deprecated; please switch to unmask_base [ 8.663883] mmcblk1: mmc1:1234 SA16G 14.5 GiB [ 8.698503] axp20x-i2c 0-0034: AXP20X driver loaded [ 8.732017] libata version 3.00 loaded. [ 8.749151] ahci-sunxi 1c18000.sata: supply ahci not found, using dummy regulator [ 8.749717] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pa not found, using dummy regulator [ 8.757188] ahci-sunxi 1c18000.sata: supply phy not found, using dummy regulator [ 8.818487] sun7i-dwmac 1c50000.ethernet: IRQ eth_wake_irq not found [ 8.825005] sun7i-dwmac 1c50000.ethernet: IRQ eth_lpi not found [ 8.834172] sun7i-dwmac 1c50000.ethernet: PTP uses main clock [ 8.845209] sun7i-dwmac 1c50000.ethernet: no regulator found [ 8.864334] sun7i-dwmac 1c50000.ethernet: Version ID not available [ 8.877184] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 8.884845] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 8.886893] sun7i-dwmac 1c50000.ethernet: DWMAC1000 [ 8.892947] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 8.895817] sun7i-dwmac 1c50000.ethernet: No HW DMA feature register supported [ 8.904779] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 8.911981] sun7i-dwmac 1c50000.ethernet: TX Checksum insertion supported [ 8.926835] sun7i-dwmac 1c50000.ethernet: Normal descriptors [ 8.932529] sun7i-dwmac 1c50000.ethernet: Ring mode enabled [ 8.946820] scsi host0: ahci-sunxi [ 8.959357] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 117 [ 9.135921] axp20x-gpio axp20x-gpio: DMA mask not set [ 9.197540] axp20x-gpio axp20x-gpio: AXP209 pinctrl and GPIO driver loaded [ 9.282092] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9.289266] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 [ 9.296085] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) [ 9.305515] ata1.00: configured for UDMA/133 [ 9.311105] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 [ 9.327472] axp20x-usb-power-supply axp20x-usb-power-supply: DMA mask not set [ 9.370570] sun7i-dwmac 1c50000.ethernet enx42fe6cf19ccc: renamed from eth0 [ 9.503189] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 9.510869] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 9.516755] sd 0:0:0:0: [sda] Write Protect is off [ 9.521647] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 9.521911] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.531170] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 9.561526] sda: sda1 sda2 < sda5 > [ 9.568736] sd 0:0:0:0: [sda] Attached SCSI disk [ 10.852402] random: crng init done [ 11.020235] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 11.032704] device-mapper: uevent: version 1.0.3 [ 11.040568] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 11.866797] PM: Image not found (code -22) [ 12.444092] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 12.654633] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 13.117219] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 17.743062] mc: Linux media interface: v0.10 [ 18.002952] Registered IR keymap rc-empty [ 18.008106] rc rc0: sunxi-ir as /devices/platform/soc/1c21800.ir/rc/rc0 [ 18.015959] rc rc0: lirc_dev: driver sunxi-ir registered at minor = 0, raw IR receiver, no transmitter [ 18.017411] videodev: Linux video capture interface: v2.00 [ 18.035367] input: sunxi-ir as /devices/platform/soc/1c21800.ir/rc/rc0/input0 [ 18.043738] sunxi-ir 1c21800.ir: initialized sunXi IR driver [ 18.077805] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 18.089752] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 18.236839] sun4i-ss 1c15000.crypto-engine: no reset control found [ 18.312652] sun4i-ss 1c15000.crypto-engine: Die ID 0 [ 18.436716] sun4i-drm display-engine: bound 1e00000.display-frontend (ops sun4i_frontend_driver_exit [sun4i_frontend]) [ 18.460015] sun4i-drm display-engine: bound 1e20000.display-frontend (ops sun4i_frontend_driver_exit [sun4i_frontend]) [ 18.472055] sun4i-drm display-engine: bound 1e60000.display-backend (ops sun4i_backend_ops [sun4i_backend]) [ 18.486947] sun4i-drm display-engine: bound 1e40000.display-backend (ops sun4i_backend_ops [sun4i_backend]) [ 18.499666] sun4i-drm display-engine: No panel or bridge found... RGB output disabled [ 18.507902] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops sun4i_tcon_platform_driver_exit [sun4i_tcon]) [ 18.529418] input: axp20x-pek as /devices/platform/soc/1c2ac00.i2c/i2c-0/0-0034/axp20x-pek/input/input1 [ 18.537567] sun4i-drm display-engine: No panel or bridge found... RGB output disabled [ 18.547041] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops sun4i_tcon_platform_driver_exit [sun4i_tcon]) [ 18.631098] axp20x-ac-power-supply axp20x-ac-power-supply: DMA mask not set [ 18.631098] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set [ 18.648657] Registered IR keymap rc-cec [ 18.654792] axp20x-adc axp20x-adc: DMA mask not set [ 18.660206] rc rc1: sun4i as /devices/platform/soc/1c16000.hdmi/rc/rc1 [ 18.684038] input: sun4i as /devices/platform/soc/1c16000.hdmi/rc/rc1/input2 [ 18.699081] sunxi_cedrus: module is from the staging directory, the quality is unknown, you have been warned. [ 18.758661] usb_phy_generic usb_phy_generic.0.auto: supply vcc not found, using dummy regulator [ 18.776088] sun4i-drm display-engine: bound 1c16000.hdmi (ops sun4i_hdmi_driver_exit [sun4i_drm_hdmi]) [ 18.787492] lima 1c40000.gpu: gp - mali400 version major 1 minor 1 [ 18.807608] cedrus 1c0e000.video-codec: Device registered as /dev/video0 [ 18.819537] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1 [ 18.826507] usb_phy_generic usb_phy_generic.0.auto: dummy supplies not allowed for exclusive requests [ 18.862116] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1 [ 18.892049] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver [ 18.899023] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus [ 18.901218] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0 [ 18.913416] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1 [ 18.952359] lima 1c40000.gpu: bus rate = 300000000 [ 18.957567] lima 1c40000.gpu: mod rate = 384000000 [ 18.965196] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 18.973791] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 18.981200] usb usb1: Product: MUSB HDRC host driver [ 18.986256] usb usb1: Manufacturer: Linux 6.1.0-20-armmp-lpae musb-hcd [ 18.986256] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes [ 18.986497] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes [ 18.992867] usb usb1: SerialNumber: musb-hdrc.1.auto [ 19.000536] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 19.022555] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 1 [ 19.047160] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 19.101109] hub 1-0:1.0: USB hub found [ 19.107369] hub 1-0:1.0: 1 port detected [ 19.113804] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 19.135038] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 19.147399] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 19.182577] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 19.208136] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 19.234369] ehci-platform 1c14000.usb: EHCI Host Controller [ 19.234681] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 2 [ 19.251913] ehci-platform 1c1c000.usb: EHCI Host Controller [ 19.258042] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 3 [ 19.267345] platform regulatory.0: firmware: direct-loading firmware regulatory.db [ 19.268700] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4 [ 19.289378] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s [ 19.328782] ohci-platform 1c1c400.usb: irq 131, io mem 0x01c1c400 [ 19.343795] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 5 [ 19.380775] ehci-platform 1c14000.usb: irq 133, io mem 0x01c14000 [ 19.400357] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 19.409027] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 19.416508] usb usb2: Product: Generic Platform OHCI controller [ 19.422538] usb usb2: Manufacturer: Linux 6.1.0-20-armmp-lpae ohci_hcd [ 19.429241] usb usb2: SerialNumber: 1c1c400.usb [ 19.439065] ehci-platform 1c1c000.usb: irq 134, io mem 0x01c1c000 [ 19.446896] ohci-platform 1c14400.usb: irq 132, io mem 0x01c14400 [ 19.452624] cryptd: max_cpu_qlen set to 1000 [ 19.453488] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 19.495450] hub 2-0:1.0: USB hub found [ 19.501564] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 19.505942] hub 2-0:1.0: 1 port detected [ 19.526758] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 19.535369] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 19.542843] usb usb3: Product: EHCI Host Controller [ 19.547876] usb usb3: Manufacturer: Linux 6.1.0-20-armmp-lpae ehci_hcd [ 19.554617] usb usb3: SerialNumber: 1c14000.usb [ 19.568484] hub 3-0:1.0: USB hub found [ 19.575303] hub 3-0:1.0: 1 port detected [ 19.599414] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 19.607961] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 19.615371] usb usb5: Product: EHCI Host Controller [ 19.620380] usb usb5: Manufacturer: Linux 6.1.0-20-armmp-lpae ehci_hcd [ 19.627049] usb usb5: SerialNumber: 1c1c000.usb [ 19.639947] hub 5-0:1.0: USB hub found [ 19.645234] hub 5-0:1.0: 1 port detected [ 19.653154] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 19.661701] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 19.669027] usb usb4: Product: Generic Platform OHCI controller [ 19.675139] usb usb4: Manufacturer: Linux 6.1.0-20-armmp-lpae ohci_hcd [ 19.681779] usb usb4: SerialNumber: 1c14400.usb [ 19.750117] hub 4-0:1.0: USB hub found [ 19.797709] hub 4-0:1.0: 1 port detected [ 20.076764] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43362-sdio for chip BCM43362/1 [ 20.086437] brcmfmac mmc0:0001:1: firmware: failed to load brcm/brcmfmac43362-sdio.cubietech,cubietruck.bin (-2) [ 20.089587] usbcore: registered new interface driver brcmfmac [ 20.096758] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware [ 20.120952] brcmfmac mmc0:0001:1: firmware: failed to load brcm/brcmfmac43362-sdio.cubietech,cubietruck.bin (-2) [ 20.131294] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac43362-sdio.cubietech,cubietruck.bin failed with error -2 [ 20.143292] brcmfmac mmc0:0001:1: firmware: failed to load brcm/brcmfmac43362-sdio.bin (-2) [ 20.152015] brcmfmac mmc0:0001:1: firmware: failed to load brcm/brcmfmac43362-sdio.bin (-2) [ 20.160535] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac43362-sdio.bin failed with error -2 [ 21.180703] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 [ 21.604234] Bluetooth: Core ver 2.22 [ 21.608331] NET: Registered PF_BLUETOOTH protocol family [ 21.613746] Bluetooth: HCI device and connection manager initialized [ 21.621378] Bluetooth: HCI socket layer initialized [ 21.626396] Bluetooth: L2CAP socket layer initialized [ 21.631545] Bluetooth: SCO socket layer initialized [ 21.724568] Bluetooth: HCI UART driver ver 2.3 [ 21.729105] Bluetooth: HCI UART protocol H4 registered [ 21.734524] Bluetooth: HCI UART protocol LL registered [ 21.739747] Bluetooth: HCI UART protocol ATH3K registered [ 21.745430] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 21.752275] Bluetooth: HCI UART protocol Intel registered [ 21.758976] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator [ 21.766895] Bluetooth: HCI UART protocol Broadcom registered [ 21.772837] Bluetooth: HCI UART protocol QCA registered [ 21.778158] Bluetooth: HCI UART protocol AG6XX registered [ 21.783758] Bluetooth: HCI UART protocol Marvell registered [ 21.790016] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator [ 22.162256] Bluetooth: hci0: BCM: chip id 63 [ 22.167624] Bluetooth: hci0: BCM: features 0x07 [ 22.175047] Bluetooth: hci0: BCM20702A [ 22.179025] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 [ 22.185357] bluetooth hci0: firmware: failed to load brcm/BCM20702A1.cubietech,cubietruck.hcd (-2) [ 22.194998] bluetooth hci0: firmware: failed to load brcm/BCM20702A1.cubietech,cubietruck.hcd (-2) [ 22.204572] bluetooth hci0: firmware: failed to load brcm/BCM20702A1.hcd (-2) [ 22.212107] bluetooth hci0: firmware: failed to load brcm/BCM20702A1.hcd (-2) [ 22.219621] bluetooth hci0: firmware: failed to load brcm/BCM.cubietech,cubietruck.hcd (-2) [ 22.228471] bluetooth hci0: firmware: failed to load brcm/BCM.cubietech,cubietruck.hcd (-2) [ 22.237168] bluetooth hci0: firmware: failed to load brcm/BCM.hcd (-2) [ 22.243970] bluetooth hci0: firmware: failed to load brcm/BCM.hcd (-2) [ 22.250758] Bluetooth: hci0: BCM: firmware Patch file not found, tried: [ 22.257541] Bluetooth: hci0: BCM: 'brcm/BCM20702A1.cubietech,cubietruck.hcd' [ 22.264696] Bluetooth: hci0: BCM: 'brcm/BCM20702A1.hcd' [ 22.270053] Bluetooth: hci0: BCM: 'brcm/BCM.cubietech,cubietruck.hcd' [ 22.276625] Bluetooth: hci0: BCM: 'brcm/BCM.hcd' [ 23.104503] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 26.689540] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 26.751229] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 27.173932] Adding 1949692k swap on /dev/mapper/cubietruck--braque--vg-swap_1. Priority:-2 extents:1 across:1949692k FS [ 29.704945] audit: type=1400 audit(1713895684.460:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=988 comm="apparmor_parser" [ 29.737159] audit: type=1400 audit(1713895684.484:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=988 comm="apparmor_parser" [ 29.791479] audit: type=1400 audit(1713895684.544:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=987 comm="apparmor_parser" [ 30.084937] sun7i-dwmac 1c50000.ethernet enx42fe6cf19ccc: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 30.101703] sun7i-dwmac 1c50000.ethernet enx42fe6cf19ccc: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=POLL) [ 30.124577] sun7i-dwmac 1c50000.ethernet enx42fe6cf19ccc: No Safety Features support found [ 30.132944] sun7i-dwmac 1c50000.ethernet enx42fe6cf19ccc: RX IPC Checksum Offload disabled [ 30.141265] sun7i-dwmac 1c50000.ethernet enx42fe6cf19ccc: No MAC Management Counters available [ 30.149929] sun7i-dwmac 1c50000.ethernet enx42fe6cf19ccc: PTP not supported by HW [ 30.189458] sun7i-dwmac 1c50000.ethernet enx42fe6cf19ccc: configuring for phy/rgmii-id link mode [ 30.992688] audit: type=1400 audit(1713895685.748:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1045 comm="apparmor_parser" [ 31.021491] audit: type=1400 audit(1713895685.768:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1045 comm="apparmor_parser" [ 31.040698] audit: type=1400 audit(1713895685.792:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1045 comm="apparmor_parser" [ 32.165653] audit: type=1400 audit(1713895686.920:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1041 comm="apparmor_parser" [ 32.196493] audit: type=1400 audit(1713895686.928:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1041 comm="apparmor_parser" [ 32.214089] audit: type=1400 audit(1713895686.940:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1041 comm="apparmor_parser" [ 32.233019] audit: type=1400 audit(1713895686.960:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=1041 comm="apparmor_parser" [ 34.310767] sun7i-dwmac 1c50000.ethernet enx42fe6cf19ccc: Link is Up - 1Gbps/Full - flow control off [ 34.321247] IPv6: ADDRCONF(NETDEV_CHANGE): enx42fe6cf19ccc: link becomes ready