[ 0.000000] Linux version 4.19.80+ (osstest@himrod2) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Tue Mar 21 08:00:31 UTC 2023 [ 0.000000] Command line: placeholder root=/dev/mapper/godello0--vg-root ro net.ifnames=0 console=hvc0 net.ifnames=0 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] Xen: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020060fff] usable [ 0.000000] Xen: [mem 0x000000009573f000-0x0000000095bbefff] reserved [ 0.000000] Xen: [mem 0x0000000095bbf000-0x0000000095fbefff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000095fbf000-0x0000000095ffefff] ACPI data [ 0.000000] Xen: [mem 0x0000000096000000-0x000000009fffffff] reserved [ 0.000000] Xen: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] Xen: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed90fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. PowerEdge R220/081N4V, BIOS 1.1.4 05/06/2014 [ 0.000000] Hypervisor detected: Xen PV [ 0.000459] tsc: Detected 3092.836 MHz processor [ 0.005353] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.005355] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.005358] last_pfn = 0x20061 max_arch_pfn = 0x400000000 [ 0.005360] Disabled [ 0.005361] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.005364] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.005395] Scanning 1 areas for low memory corruption [ 0.005407] Kernel/User page tables isolation: disabled on XEN PV. [ 0.006753] BRK [0x02a01000, 0x02a01fff] PGTABLE [ 0.128922] BRK [0x02a02000, 0x02a02fff] PGTABLE [ 0.130752] RAMDISK: [mem 0x04000000-0x05b2cfff] [ 0.130767] ACPI: Early table checksum verification disabled [ 0.131454] ACPI: RSDP 0x00000000000FE020 000024 (v02 DELL ) [ 0.131463] ACPI: XSDT 0x0000000095FCF188 0000E4 (v01 DELL PE_SC3 00000001 01000013) [ 0.131494] ACPI: FACP 0x0000000095FF7000 00010C (v05 DELL PE_SC3 00000001 DELL 00040000) [ 0.131547] ACPI: DSDT 0x0000000095FDF000 012335 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.131559] ACPI: FACS 0x0000000095FBD000 000040 [ 0.131571] ACPI: UEFI 0x0000000095FFD000 000236 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.131582] ACPI: UEFI 0x0000000095FFC000 000042 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.131594] ACPI: ASF! 0x0000000095FFB000 0000A5 (v32 DELL PE_SC3 00000001 DELL 00040000) [ 0.131606] ACPI: ASPT 0x0000000095FFA000 000034 (v07 DELL PE_SC3 00000001 DELL 00040000) [ 0.131618] ACPI: BOOT 0x0000000095FF9000 000028 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.131630] ACPI: DBGP 0x0000000095FF8000 000034 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.131642] ACPI: HPET 0x0000000095FF6000 000038 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.131654] ACPI: APIC 0x0000000095FF5000 000092 (v03 DELL PE_SC3 00000001 DELL 00040000) [ 0.131665] ACPI: MCFG 0x0000000095FF4000 00003C (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.131677] ACPI: SLIC 0x0000000095FF3000 000176 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.131690] ACPI: SSDT 0x0000000095FDC000 002028 (v01 DELL PE_SC3 00001000 DELL 00040000) [ 0.131702] ACPI: SPMI 0x0000000095FDA000 000040 (v05 DELL PE_SC3 00000001 DELL 00040000) [ 0.131714] ACPI: SSDT 0x0000000095FD9000 000533 (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.131726] ACPI: SSDT 0x0000000095FD8000 000ACE (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.131738] ACPI: SSDT 0x0000000095FD4000 003492 (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.131749] ACPI: SPCR 0x0000000095FF2000 000050 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.131761] ACPI: RMAD 0x0000000095FD3000 000080 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.131773] ACPI: SSDT 0x0000000095FD2000 000514 (v01 DELL PE_SC3 00001000 DELL 00040000) [ 0.131785] ACPI: FPDT 0x0000000095FD1000 000044 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.131797] ACPI: HEST 0x0000000095FD0000 0000A8 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.131809] ACPI: ERST 0x0000000095FCE000 000230 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.131821] ACPI: BERT 0x0000000095FCD000 000030 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.131833] ACPI: EINJ 0x0000000095FCC000 000150 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.131870] ACPI: Local APIC address 0xfee00000 [ 0.131871] Setting APIC routing to Xen PV. [ 0.132043] Zone ranges: [ 0.132044] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.132046] DMA32 [mem 0x0000000001000000-0x0000000020060fff] [ 0.132047] Normal empty [ 0.132048] Movable zone start for each node [ 0.132048] Early memory node ranges [ 0.132049] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.132050] node 0: [mem 0x0000000000100000-0x0000000020060fff] [ 0.132051] Reserved but unavailable: 1 pages [ 0.132052] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020060fff] [ 0.132053] On node 0 totalpages: 131071 [ 0.132054] DMA zone: 64 pages used for memmap [ 0.132055] DMA zone: 21 pages reserved [ 0.132055] DMA zone: 3998 pages, LIFO batch:0 [ 0.132118] DMA32 zone: 1986 pages used for memmap [ 0.132118] DMA32 zone: 127073 pages, LIFO batch:31 [ 0.134008] p2m virtual area at (____ptrval____), size is 40000000 [ 0.223917] Remapped 97 page(s) [ 0.224437] ACPI: PM-Timer IO Port: 0x1808 [ 0.224443] ACPI: Local APIC address 0xfee00000 [ 0.224474] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.224499] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.224507] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.224510] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.224514] ACPI: IRQ0 used by override. [ 0.224514] ACPI: IRQ9 used by override. [ 0.224521] Using ACPI (MADT) for SMP configuration information [ 0.224525] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.224532] ACPI: SPCR: SPCR table version 1 [ 0.224534] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.224539] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.224551] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.224552] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.224553] [mem 0x20061000-0x9573efff] available for PCI devices [ 0.224556] Booting paravirtualized kernel on Xen [ 0.224557] Xen version: 4.18-unstable (preserve-AD) [ 0.224559] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.308773] random: get_random_bytes called from start_kernel+0x8e/0x594 with crng_init=0 [ 0.308778] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.309073] percpu: Embedded 43 pages/cpu s138264 r8192 d29672 u262144 [ 0.309077] pcpu-alloc: s138264 r8192 d29672 u262144 alloc=1*2097152 [ 0.309079] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.309126] xen: PV spinlocks enabled [ 0.309128] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes) [ 0.309131] Built 1 zonelists, mobility grouping on. Total pages: 129000 [ 0.309132] Kernel command line: placeholder root=/dev/mapper/godello0--vg-root ro net.ifnames=0 console=hvc0 net.ifnames=0 [ 0.309241] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.309262] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.346232] software IO TLB: mapped [mem 0x1b000000-0x1f000000] (64MB) [ 0.347931] Memory: 388248K/524284K available (12312K kernel code, 1274K rwdata, 2652K rodata, 1344K init, 1660K bss, 136036K reserved, 0K cma-reserved) [ 0.348028] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.349044] rcu: Hierarchical RCU implementation. [ 0.349045] rcu: RCU event tracing is enabled. [ 0.349046] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.349047] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.350200] Using NULL legacy PIC [ 0.350201] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 0 [ 0.350236] xen:events: Using FIFO-based ABI [ 0.350258] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.350265] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.350272] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.350278] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.350284] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.350290] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.350297] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.350303] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.350310] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.350316] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.350323] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.350330] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.350336] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.350342] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.350349] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.360303] Console: colour VGA+ 80x25 [ 0.386127] console [tty0] enabled [ 0.387047] console [hvc0] enabled [ 0.387293] ACPI: Core revision 20180810 [ 0.398197] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.398559] Xen: using vcpuop timer interface [ 0.398564] installing Xen timer for CPU 0 [ 0.398895] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c94d83b270, max_idle_ns: 440795286026 ns [ 0.399312] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.67 BogoMIPS (lpj=3092836) [ 0.399666] pid_max: default: 32768 minimum: 301 [ 0.400295] Security Framework initialized [ 0.400540] SELinux: Initializing. [ 0.400817] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.401049] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.401599] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.401832] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.402068] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.402251] Spectre V2 : Mitigation: Full generic retpoline [ 0.402476] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.402808] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.403083] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.403250] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.403483] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.404103] MDS: Mitigation: Clear CPU buffers [ 0.404412] Freeing SMP alternatives memory: 36K [ 0.407321] cpu 0 spinlock event irq 25 [ 0.407939] VPMU disabled by hypervisor. [ 0.408371] Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only. [ 0.409303] rcu: Hierarchical SRCU implementation. [ 0.410199] smp: Bringing up secondary CPUs ... [ 0.410339] installing Xen timer for CPU 1 [ 0.411270] cpu 1 spinlock event irq 37 [ 0.412576] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.413348] installing Xen timer for CPU 2 [ 0.414274] cpu 2 spinlock event irq 44 [ 0.414918] installing Xen timer for CPU 3 [ 0.415529] cpu 3 spinlock event irq 51 [ 0.416253] smp: Brought up 1 node, 4 CPUs [ 0.416838] smpboot: Max logical packages: 2 [ 0.417306] devtmpfs: initialized [ 0.417915] x86/mm: Memory block size: 128MB [ 0.418408] PM: Registering ACPI NVS region [mem 0x95bbf000-0x95fbefff] (4194304 bytes) [ 0.419328] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.420253] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.421083] RTC time: 8:48:54, date: 03/21/23 [ 0.421349] NET: Registered protocol family 16 [ 0.421990] xen:grant_table: Grant tables using version 1 layout [ 0.422263] Grant table initialized [ 0.422997] audit: initializing netlink subsys (disabled) [ 0.423269] audit: type=2000 audit(1679388535.244:1): state=initialized audit_enabled=0 res=1 [ 0.423375] Simple Boot Flag at 0x44 set to 0x1 [ 0.424888] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.425252] ACPI: bus type PCI registered [ 0.426010] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.426263] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 0.464250] random: fast init done [ 0.472140] PCI: Using configuration type 1 for base access [ 0.472309] PCI: Dell System detected, enabling pci=bfsort. [ 0.477449] ACPI: Added _OSI(Module Device) [ 0.477449] ACPI: Added _OSI(Processor Device) [ 0.477894] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.479251] ACPI: Added _OSI(Processor Aggregator Device) [ 0.479902] ACPI: Added _OSI(Linux-Dell-Video) [ 0.480253] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.492521] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.493868] xen: registering gsi 9 triggering 0 polarity 0 [ 0.495841] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.497641] ACPI: Dynamic OEM Table Load: [ 0.498260] ACPI: SSDT 0xFFFF88801A2D5400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120816) [ 0.499748] ACPI: Dynamic OEM Table Load: [ 0.500256] ACPI: SSDT 0xFFFF88801A568800 0005AA (v01 PmRef ApIst 00003000 INTL 20120816) [ 0.502618] ACPI: Dynamic OEM Table Load: [ 0.503254] ACPI: SSDT 0xFFFF88801ADB9400 000119 (v01 PmRef ApCst 00003000 INTL 20120816) [ 0.505181] ACPI: Interpreter enabled [ 0.505272] ACPI: (supports S0 S4 S5) [ 0.505880] ACPI: Using IOAPIC for interrupt routing [ 0.507278] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.508537] ACPI: Enabled 11 GPEs in block 00 to 3F [ 0.528498] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1) [ 0.539965] ACPI: Power Resource [FN00] (off) [ 0.540334] ACPI: Power Resource [FN01] (off) [ 0.541059] ACPI: Power Resource [FN02] (off) [ 0.541328] ACPI: Power Resource [FN03] (off) [ 0.542098] ACPI: Power Resource [FN04] (off) [ 0.543069] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) [ 0.543255] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.545157] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR] [ 0.545251] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.546641] PCI host bridge to bus 0000:00 [ 0.547252] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.547885] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.548251] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.549250] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff window] [ 0.550251] pci_bus 0000:00: root bus resource [bus 00-7e] [ 0.550940] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000 [ 0.551385] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.551486] pci 0000:00:14.0: reg 0x10: [mem 0xa2b00000-0xa2b0ffff 64bit] [ 0.551772] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.552017] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.552097] pci 0000:00:1a.0: reg 0x10: [mem 0xa2b12000-0xa2b123ff] [ 0.552427] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.552665] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.553022] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.553095] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.553261] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.554138] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 [ 0.554487] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.554563] pci 0000:00:1c.2: Enabling MPC IRBNCE [ 0.555210] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled [ 0.555522] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.555599] pci 0000:00:1d.0: reg 0x10: [mem 0xa2b11000-0xa2b113ff] [ 0.555920] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.556132] pci 0000:00:1f.0: [8086:8c52] type 00 class 0x060100 [ 0.556696] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.556781] pci 0000:00:1f.2: reg 0x10: [io 0x3048-0x304f] [ 0.556816] pci 0000:00:1f.2: reg 0x14: [io 0x3054-0x3057] [ 0.556849] pci 0000:00:1f.2: reg 0x18: [io 0x3040-0x3047] [ 0.556878] pci 0000:00:1f.2: reg 0x1c: [io 0x3050-0x3053] [ 0.556907] pci 0000:00:1f.2: reg 0x20: [io 0x3020-0x303f] [ 0.556945] pci 0000:00:1f.2: reg 0x24: [mem 0xa2b10000-0xa2b107ff] [ 0.557125] pci 0000:00:1f.2: PME# supported from D3hot [ 0.557335] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.557425] pci 0000:00:1f.3: reg 0x10: [mem 0xa2b13000-0xa2b130ff 64bit] [ 0.557521] pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f] [ 0.558038] pci 0000:01:00.0: [14e4:165f] type 00 class 0x020000 [ 0.558167] pci 0000:01:00.0: reg 0x10: [mem 0xa2a30000-0xa2a3ffff 64bit pref] [ 0.558235] pci 0000:01:00.0: reg 0x18: [mem 0xa2a40000-0xa2a4ffff 64bit pref] [ 0.558357] pci 0000:01:00.0: reg 0x20: [mem 0xa2a50000-0xa2a5ffff 64bit pref] [ 0.558405] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 0.558870] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.559322] pci 0000:01:00.1: [14e4:165f] type 00 class 0x020000 [ 0.559450] pci 0000:01:00.1: reg 0x10: [mem 0xa2a00000-0xa2a0ffff 64bit pref] [ 0.559521] pci 0000:01:00.1: reg 0x18: [mem 0xa2a10000-0xa2a1ffff 64bit pref] [ 0.559596] pci 0000:01:00.1: reg 0x20: [mem 0xa2a20000-0xa2a2ffff 64bit pref] [ 0.559641] pci 0000:01:00.1: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 0.560053] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold [ 0.560540] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.561239] pci 0000:00:1c.0: bridge window [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.561694] pci 0000:02:00.0: [1912:0013] type 01 class 0x060400 [ 0.564477] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.565946] pci 0000:00:1c.2: PCI bridge to [bus 02-06] [ 0.566268] pci 0000:00:1c.2: bridge window [mem 0xa2000000-0xa29fffff] [ 0.566285] pci 0000:00:1c.2: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.567475] pci 0000:03:00.0: [1912:0013] type 01 class 0x060400 [ 0.570658] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.572191] pci 0000:03:01.0: [1912:0013] type 01 class 0x060400 [ 0.575509] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold [ 0.578636] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 0.579448] pci 0000:02:00.0: bridge window [mem 0xa2000000-0xa29fffff] [ 0.579577] pci 0000:02:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.580812] pci 0000:04:00.0: [1912:0012] type 01 class 0x060400 [ 0.585295] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 0.586165] pci 0000:03:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.586285] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.587363] pci_bus 0000:05: extended config space not accessible [ 0.588251] pci 0000:05:00.0: [102b:0534] type 00 class 0x030000 [ 0.588763] pci 0000:05:00.0: reg 0x10: [mem 0xa1000000-0xa1ffffff pref] [ 0.589022] pci 0000:05:00.0: reg 0x14: [mem 0xa2800000-0xa2803fff] [ 0.589290] pci 0000:05:00.0: reg 0x18: [mem 0xa2000000-0xa27fffff] [ 0.593716] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.594477] pci 0000:04:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.594622] pci 0000:04:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.596088] pci 0000:06:00.0: [1912:0011] type 00 class 0x050000 [ 0.596709] pci 0000:06:00.0: reg 0x10: [mem 0xa2901000-0xa2901fff] [ 0.596978] pci 0000:06:00.0: reg 0x14: [mem 0xa2900000-0xa290007f] [ 0.599250] pci 0000:06:00.0: PME# supported from D3hot [ 0.600043] pci 0000:03:01.0: PCI bridge to [bus 06] [ 0.600473] pci 0000:03:01.0: bridge window [mem 0xa2900000-0xa29fffff] [ 0.601579] pci_bus 0000:00: on NUMA node 0 [ 0.601770] xen: registering gsi 13 triggering 1 polarity 0 [ 0.602813] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.603331] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.604040] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.604330] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.605050] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.605330] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.606322] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.607323] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.608392] xen:balloon: Initialising balloon driver [ 0.609095] pci 0000:05:00.0: vgaarb: setting as boot VGA device [ 0.609095] pci 0000:05:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.609255] pci 0000:05:00.0: vgaarb: bridge control possible [ 0.609910] vgaarb: loaded [ 0.610289] SCSI subsystem initialized [ 0.610939] libata version 3.00 loaded. [ 0.610939] ACPI: bus type USB registered [ 0.611272] usbcore: registered new interface driver usbfs [ 0.611914] usbcore: registered new interface driver hub [ 0.612270] usbcore: registered new device driver usb [ 0.612903] pps_core: LinuxPPS API ver. 1 registered [ 0.613251] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.614255] PTP clock support registered [ 0.614938] EDAC MC: Ver: 3.0.0 [ 0.616015] Advanced Linux Sound Architecture Driver Initialized. [ 0.616262] PCI: Using ACPI for IRQ routing [ 0.633884] PCI: pci_cache_line_size set to 64 bytes [ 0.634547] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.634548] e820: reserve RAM buffer [mem 0x20061000-0x23ffffff] [ 0.634632] NetLabel: Initializing [ 0.635251] NetLabel: domain hash size = 128 [ 0.635895] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.636261] NetLabel: unlabeled traffic allowed by default [ 0.637774] clocksource: Switched to clocksource tsc-early [ 0.644591] VFS: Disk quotas dquot_6.6.0 [ 0.645353] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.646019] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.647227] pnp: PnP ACPI init [ 0.648007] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.648653] system 00:00: [io 0xffff] has been reserved [ 0.649286] system 00:00: [io 0xffff] has been reserved [ 0.649953] system 00:00: [io 0xffff] has been reserved [ 0.650609] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.651215] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.651866] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.651918] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.652572] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.652579] xen: registering gsi 8 triggering 1 polarity 0 [ 0.652614] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.652653] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.653328] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.653631] xen: registering gsi 3 triggering 1 polarity 0 [ 0.653688] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.653903] xen: registering gsi 4 triggering 1 polarity 0 [ 0.653905] Already setup the GSI :4 [ 0.654604] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.654765] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.655407] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.656046] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.656697] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.657338] system 00:06: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.658011] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.658682] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.659437] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved [ 0.660093] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.660741] system 00:06: [mem 0xa0000000-0xa0000fff] has been reserved [ 0.661398] system 00:06: [mem 0xa0020000-0xa002ffff] has been reserved [ 0.662041] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.662927] pnp: PnP ACPI: found 7 devices [ 0.682303] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.683967] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0100000-0xa01fffff] [ 0.684656] pci 0000:01:00.0: BAR 6: assigned [mem 0xa0100000-0xa013ffff pref] [ 0.685828] pci 0000:01:00.1: BAR 6: assigned [mem 0xa0140000-0xa017ffff pref] [ 0.686988] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.687660] pci 0000:00:1c.0: bridge window [mem 0xa0100000-0xa01fffff] [ 0.688320] pci 0000:00:1c.0: bridge window [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.689537] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.690339] pci 0000:04:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.691065] pci 0000:04:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.692445] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 0.693242] pci 0000:03:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.694013] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.695408] pci 0000:03:01.0: PCI bridge to [bus 06] [ 0.696214] pci 0000:03:01.0: bridge window [mem 0xa2900000-0xa29fffff] [ 0.697235] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 0.698017] pci 0000:02:00.0: bridge window [mem 0xa2000000-0xa29fffff] [ 0.698758] pci 0000:02:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.700226] pci 0000:00:1c.2: PCI bridge to [bus 02-06] [ 0.700890] pci 0000:00:1c.2: bridge window [mem 0xa2000000-0xa29fffff] [ 0.701575] pci 0000:00:1c.2: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.702839] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.702840] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.702841] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.702842] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff window] [ 0.702843] pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa01fffff] [ 0.702843] pci_bus 0000:01: resource 2 [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.702844] pci_bus 0000:02: resource 1 [mem 0xa2000000-0xa29fffff] [ 0.702845] pci_bus 0000:02: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.702846] pci_bus 0000:03: resource 1 [mem 0xa2000000-0xa29fffff] [ 0.702847] pci_bus 0000:03: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.702847] pci_bus 0000:04: resource 1 [mem 0xa2000000-0xa28fffff] [ 0.702848] pci_bus 0000:04: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.702849] pci_bus 0000:05: resource 1 [mem 0xa2000000-0xa28fffff] [ 0.702850] pci_bus 0000:05: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.702851] pci_bus 0000:06: resource 1 [mem 0xa2900000-0xa29fffff] [ 0.702933] NET: Registered protocol family 2 [ 0.703676] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes) [ 0.704870] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.705551] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 0.706219] TCP: Hash tables configured (established 4096 bind 4096) [ 0.706883] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.707551] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.708201] NET: Registered protocol family 1 [ 0.709004] RPC: Registered named UNIX socket transport module. [ 0.709692] RPC: Registered udp transport module. [ 0.710327] RPC: Registered tcp transport module. [ 0.710974] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.711848] xen: registering gsi 16 triggering 0 polarity 1 [ 0.711865] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.713141] pci 0000:00:14.0: CONFIG_USB_XHCI_HCD is turned off, defaulting to EHCI. [ 0.714297] pci 0000:00:14.0: USB 3.0 devices will work at USB 2.0 speeds. [ 0.715112] xen: registering gsi 16 triggering 0 polarity 1 [ 0.715115] Already setup the GSI :16 [ 0.727381] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x69a took 12031 usecs [ 0.728663] xen: registering gsi 23 triggering 0 polarity 1 [ 0.728676] xen: --> pirq=23 -> irq=23 (gsi=23) [ 0.740377] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x69a took 11495 usecs [ 0.742023] pci 0000:05:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.756278] pci 0000:05:00.0: pci_fixup_video+0x0/0x110 took 14141 usecs [ 0.757032] PCI: CLS 64 bytes, default 64 [ 0.757055] Unpacking initramfs... [ 1.031250] Freeing initrd memory: 27828K [ 1.032009] kvm: no hardware support [ 1.032675] has_svm: not amd [ 1.033341] kvm: no hardware support [ 1.034555] Scanning for low memory corruption every 60 seconds [ 1.035869] Initialise system trusted keyrings [ 1.036564] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.038435] NFS: Registering the id_resolver key type [ 1.039060] Key type id_resolver registered [ 1.039749] Key type id_legacy registered [ 1.042860] Key type asymmetric registered [ 1.043496] Asymmetric key parser 'x509' registered [ 1.044253] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.045537] io scheduler noop registered [ 1.046197] io scheduler deadline registered [ 1.046847] io scheduler cfq registered (default) [ 1.047511] io scheduler mq-deadline registered [ 1.048142] io scheduler kyber registered [ 1.049050] xen: registering gsi 16 triggering 0 polarity 1 [ 1.049055] Already setup the GSI :16 [ 1.050121] xen: registering gsi 18 triggering 0 polarity 1 [ 1.050132] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.057733] pcieport 0000:00:1c.0: Signaling PME with IRQ 54 [ 1.058541] pcieport 0000:00:1c.2: Signaling PME with IRQ 55 [ 1.059381] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.060586] ACPI: Power Button [PWRF] [ 1.061837] Monitor-Mwait will be used to enter C-1 state [ 1.061855] Monitor-Mwait will be used to enter C-2 state [ 1.062369] Warning: Processor Platform Limit not supported. [ 1.062747] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.063433] ACPI: Thermal Zone [TZ00] (28 C) [ 1.064335] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.065010] ACPI: Thermal Zone [TZ01] (30 C) [ 1.065824] xen:xen_evtchn: Event-channel device installed [ 1.066550] xen_pciback: backend is vpci [ 1.067634] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.089491] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.091123] hpet_acpi_add: no address or irqs in _CRS [ 1.091831] Non-volatile memory driver v1.3 [ 1.092540] AMD IOMMUv2 driver by Joerg Roedel [ 1.093195] AMD IOMMUv2 functionality not available on this system [ 1.095314] loop: module loaded [ 1.098120] ahci 0000:00:1f.2: version 3.0 [ 1.098190] xen: registering gsi 19 triggering 0 polarity 1 [ 1.098208] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.098369] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.099051] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode [ 1.100259] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 1.107689] scsi host0: ahci [ 1.108470] scsi host1: ahci [ 1.109294] scsi host2: ahci [ 1.110075] scsi host3: ahci [ 1.110872] scsi host4: ahci [ 1.111696] scsi host5: ahci [ 1.112423] ata1: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10100 irq 60 [ 1.113644] ata2: DUMMY [ 1.114280] ata3: DUMMY [ 1.114998] ata4: DUMMY [ 1.115696] ata5: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10300 irq 60 [ 1.116952] ata6: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10380 irq 60 [ 1.118247] tun: Universal TUN/TAP device driver, 1.6 [ 1.118964] tg3.c:v3.137 (May 11, 2014) [ 1.119690] xen: registering gsi 16 triggering 0 polarity 1 [ 1.119693] Already setup the GSI :16 [ 1.242700] tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 54:9f:35:05:fd:58 [ 1.244004] tg3 0000:01:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 1.245188] tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 1.246416] tg3 0000:01:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 1.247481] xen: registering gsi 17 triggering 0 polarity 1 [ 1.247495] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.370868] tg3 0000:01:00.1 eth1: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 54:9f:35:05:fd:5a [ 1.372149] tg3 0000:01:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 1.373342] tg3 0000:01:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 1.374488] tg3 0000:01:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit] [ 1.375446] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.376070] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.376722] sky2: driver version 1.30 [ 1.377390] xen_netfront: Initialising Xen virtual ethernet driver [ 1.378084] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.378789] ehci-pci: EHCI PCI platform driver [ 1.379526] xen: registering gsi 16 triggering 0 polarity 1 [ 1.379528] Already setup the GSI :16 [ 1.380242] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.380980] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.382215] ehci-pci 0000:00:1a.0: debug port 2 [ 1.386817] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.386861] ehci-pci 0000:00:1a.0: irq 16, io mem 0xa2b12000 [ 1.394302] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.395013] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.396219] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.397460] usb usb1: Product: EHCI Host Controller [ 1.398108] usb usb1: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.398766] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.399534] hub 1-0:1.0: USB hub found [ 1.400226] hub 1-0:1.0: 2 ports detected [ 1.401047] xen: registering gsi 23 triggering 0 polarity 1 [ 1.401049] Already setup the GSI :23 [ 1.401765] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.402484] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.403723] ehci-pci 0000:00:1d.0: debug port 2 [ 1.408358] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.408401] ehci-pci 0000:00:1d.0: irq 23, io mem 0xa2b11000 [ 1.411411] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.412089] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.413342] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.414609] usb usb2: Product: EHCI Host Controller [ 1.415261] usb usb2: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.415941] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.416675] hub 2-0:1.0: USB hub found [ 1.417387] hub 2-0:1.0: 2 ports detected [ 1.418141] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.418832] ohci-pci: OHCI PCI platform driver [ 1.419495] uhci_hcd: USB Universal Host Controller Interface driver [ 1.420138] usbcore: registered new interface driver usblp [ 1.420825] usbcore: registered new interface driver usb-storage [ 1.421495] i8042: PNP: No PS/2 controller found. [ 1.422273] rtc_cmos 00:02: RTC can wake from S4 [ 1.423192] rtc_cmos 00:02: registered as rtc0 [ 1.423886] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram [ 1.424624] xen: registering gsi 18 triggering 0 polarity 1 [ 1.424627] Already setup the GSI :18 [ 1.425395] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.429438] device-mapper: uevent: version 1.0.3 [ 1.430124] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.431334] hidraw: raw HID events driver (C) Jiri Kosina [ 1.431731] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.432112] usbcore: registered new interface driver usbhid [ 1.433355] usbhid: USB HID core driver [ 1.434525] Initializing XFRM netlink socket [ 1.435264] NET: Registered protocol family 10 [ 1.436100] Segment Routing with IPv6 [ 1.437023] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.437773] NET: Registered protocol family 17 [ 1.438419] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.439655] Key type dns_resolver registered [ 1.440457] mce: Using 2 MCE banks [ 1.441072] sched_clock: Marking stable (1391528458, 48893320)->(1498450055, -58028277) [ 1.442841] registered taskstats version 1 [ 1.443502] Loading compiled-in X.509 certificates [ 1.444442] Magic number: 15:194:827 [ 1.445108] misc hw_random: hash matches [ 1.445802] console [netcon0] enabled [ 1.446467] netconsole: network logging started [ 1.447319] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.455226] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.455908] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 1.457116] cfg80211: failed to load regulatory.db [ 1.457790] ALSA device list: [ 1.458440] No soundcards found. [ 1.497421] ata1.00: ATA-8: TOSHIBA MG03ACA100, FL1D, max UDMA/100 [ 1.498122] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.499867] ata1.00: configured for UDMA/100 [ 1.500610] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MG03ACA1 FL1D PQ: 0 ANSI: 5 [ 1.501938] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.501944] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.503145] sd 0:0:0:0: [sda] Write Protect is off [ 1.504473] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.504479] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.696797] sda: sda1 sda2 < sda5 > [ 1.697832] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.720295] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.736300] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.812218] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.815701] ata5.00: ATAPI: HL-DT-ST DVD+/-RW GTA0N, A3B0, max UDMA/100 [ 1.820443] ata5.00: configured for UDMA/100 [ 1.835298] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD+-RW GTA0N A3B0 PQ: 0 ANSI: 5 [ 1.848719] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.861948] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.862847] hub 1-1:1.0: USB hub found [ 1.863597] hub 1-1:1.0: 4 ports detected [ 1.877725] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.878851] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.879713] hub 2-1:1.0: USB hub found [ 1.880465] hub 2-1:1.0: 6 ports detected [ 1.886776] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.887911] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.888626] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.888683] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 2.094299] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c94d83b270, max_idle_ns: 440795286026 ns [ 2.095478] clocksource: Switched to clocksource tsc [ 2.150306] usb 2-1.5: new high-speed USB device number 3 using ehci-pci [ 2.196950] ata6: SATA link down (SStatus 0 SControl 300) [ 2.199529] Freeing unused kernel image memory: 1344K [ 2.204312] Write protecting the kernel read-only data: 18432k [ 2.216207] Freeing unused kernel image memory: 1992K [ 2.217640] Freeing unused kernel image memory: 1444K [ 2.218272] Run /init as init process [ 2.231173] usb 2-1.5: New USB device found, idVendor=0624, idProduct=0248, bcdDevice= 0.00 [ 2.232326] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.233448] usb 2-1.5: Product: Gadget USB HUB [ 2.234046] usb 2-1.5: Manufacturer: no manufacturer [ 2.234671] usb 2-1.5: SerialNumber: 0123456789 [ 2.235564] hub 2-1.5:1.0: USB hub found [ 2.236291] hub 2-1.5:1.0: 6 ports detected [ 2.528307] usb 2-1.5.1: new high-speed USB device number 4 using ehci-pci [ 2.613169] random: crng init done [ 2.618419] usb 2-1.5.1: New USB device found, idVendor=0624, idProduct=0249, bcdDevice= 0.00 [ 2.619536] usb 2-1.5.1: New USB device strings: Mfr=4, Product=5, SerialNumber=6 [ 2.620650] usb 2-1.5.1: Product: Keyboard/Mouse Function [ 2.621167] usb 2-1.5.1: Manufacturer: Avocent [ 2.621796] usb 2-1.5.1: SerialNumber: 20120917 [ 2.628268] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.1/2-1.5.1:1.0/0003:0624:0249.0001/input/input1 [ 2.681560] hid-generic 0003:0624:0249.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-0000:00:1d.0-1.5.1/input0 [ 2.683890] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.1/2-1.5.1:1.1/0003:0624:0249.0002/input/input2 [ 2.685211] hid-generic 0003:0624:0249.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:1d.0-1.5.1/input1 [ 2.687236] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.1/2-1.5.1:1.2/0003:0624:0249.0003/input/input3 [ 2.688478] hid-generic 0003:0624:0249.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:1d.0-1.5.1/input2 [ 2.967708] PM: Image not found (code -22) [ 3.303412] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.578681] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 5.169295] systemd-udevd[1586]: Network interface NamePolicy= disabled on kernel command line, ignoring. [ 5.475811] systemd-udevd[1600]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 5.475886] systemd-udevd[1596]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 5.498206] systemd-udevd[1600]: Process 'ifupdown-hotplug' failed with exit code 1. [ 5.499025] systemd-udevd[1596]: Process 'ifupdown-hotplug' failed with exit code 1. [ 5.513119] systemd-udevd[1605]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 5.513331] systemd-udevd[1596]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 5.520395] systemd-udevd[1605]: Process 'ifupdown-hotplug' failed with exit code 1. [ 5.520705] systemd-udevd[1596]: Process 'ifupdown-hotplug' failed with exit code 1. [ 5.524296] systemd-udevd[1598]: Process '/etc/console-setup/cached_setup_font.sh' failed with exit code 1. [ 7.078773] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 8.042133] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 8.111235] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 8.188233] Adding 1949692k swap on /dev/mapper/godello0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 8.795595] xenbr0: port 1(eth0) entered blocking state [ 8.796337] xenbr0: port 1(eth0) entered disabled state [ 8.797027] device eth0 entered promiscuous mode [ 8.949667] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready