[ 0.000000] Linux version 4.19.80+ (osstest@nobling1) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Wed Mar 29 00:00:39 UTC 2023 [ 0.000000] Command line: placeholder root=/dev/mapper/godello1--vg-root ro net.ifnames=0 console=hvc0 net.ifnames=0 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] Xen: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020060fff] usable [ 0.000000] Xen: [mem 0x000000009573f000-0x0000000095bbefff] reserved [ 0.000000] Xen: [mem 0x0000000095bbf000-0x0000000095fbefff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000095fbf000-0x0000000095ffefff] ACPI data [ 0.000000] Xen: [mem 0x0000000096000000-0x000000009fffffff] reserved [ 0.000000] Xen: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] Xen: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed90fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. PowerEdge R220/081N4V, BIOS 1.1.4 05/06/2014 [ 0.000000] Hypervisor detected: Xen PV [ 0.000459] tsc: Detected 3092.836 MHz processor [ 0.005333] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.005334] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.005338] last_pfn = 0x20061 max_arch_pfn = 0x400000000 [ 0.005339] Disabled [ 0.005340] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.005343] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.005374] Scanning 1 areas for low memory corruption [ 0.005386] Kernel/User page tables isolation: disabled on XEN PV. [ 0.006734] BRK [0x02a01000, 0x02a01fff] PGTABLE [ 0.129360] BRK [0x02a02000, 0x02a02fff] PGTABLE [ 0.131193] RAMDISK: [mem 0x04000000-0x05b2dfff] [ 0.131207] ACPI: Early table checksum verification disabled [ 0.131892] ACPI: RSDP 0x00000000000FE020 000024 (v02 DELL ) [ 0.131901] ACPI: XSDT 0x0000000095FCF188 0000E4 (v01 DELL PE_SC3 00000001 01000013) [ 0.131932] ACPI: FACP 0x0000000095FF7000 00010C (v05 DELL PE_SC3 00000001 DELL 00040000) [ 0.131985] ACPI: DSDT 0x0000000095FDF000 012335 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.131996] ACPI: FACS 0x0000000095FBD000 000040 [ 0.132008] ACPI: UEFI 0x0000000095FFD000 000236 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.132020] ACPI: UEFI 0x0000000095FFC000 000042 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.132032] ACPI: ASF! 0x0000000095FFB000 0000A5 (v32 DELL PE_SC3 00000001 DELL 00040000) [ 0.132044] ACPI: ASPT 0x0000000095FFA000 000034 (v07 DELL PE_SC3 00000001 DELL 00040000) [ 0.132056] ACPI: BOOT 0x0000000095FF9000 000028 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.132068] ACPI: DBGP 0x0000000095FF8000 000034 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.132080] ACPI: HPET 0x0000000095FF6000 000038 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.132092] ACPI: APIC 0x0000000095FF5000 000092 (v03 DELL PE_SC3 00000001 DELL 00040000) [ 0.132104] ACPI: MCFG 0x0000000095FF4000 00003C (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.132116] ACPI: SLIC 0x0000000095FF3000 000176 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.132127] ACPI: SSDT 0x0000000095FDC000 002028 (v01 DELL PE_SC3 00001000 DELL 00040000) [ 0.132139] ACPI: SPMI 0x0000000095FDA000 000040 (v05 DELL PE_SC3 00000001 DELL 00040000) [ 0.132151] ACPI: SSDT 0x0000000095FD9000 000533 (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.132163] ACPI: SSDT 0x0000000095FD8000 000ACE (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.132175] ACPI: SSDT 0x0000000095FD4000 003492 (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.132187] ACPI: SPCR 0x0000000095FF2000 000050 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.132199] ACPI: RMAD 0x0000000095FD3000 000080 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.132211] ACPI: SSDT 0x0000000095FD2000 000514 (v01 DELL PE_SC3 00001000 DELL 00040000) [ 0.132223] ACPI: FPDT 0x0000000095FD1000 000044 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.132235] ACPI: HEST 0x0000000095FD0000 0000A8 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.132247] ACPI: ERST 0x0000000095FCE000 000230 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.132258] ACPI: BERT 0x0000000095FCD000 000030 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.132271] ACPI: EINJ 0x0000000095FCC000 000150 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.132308] ACPI: Local APIC address 0xfee00000 [ 0.132309] Setting APIC routing to Xen PV. [ 0.132480] Zone ranges: [ 0.132482] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.132483] DMA32 [mem 0x0000000001000000-0x0000000020060fff] [ 0.132484] Normal empty [ 0.132485] Movable zone start for each node [ 0.132486] Early memory node ranges [ 0.132487] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.132487] node 0: [mem 0x0000000000100000-0x0000000020060fff] [ 0.132489] Reserved but unavailable: 1 pages [ 0.132490] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020060fff] [ 0.132491] On node 0 totalpages: 131071 [ 0.132492] DMA zone: 64 pages used for memmap [ 0.132492] DMA zone: 21 pages reserved [ 0.132493] DMA zone: 3998 pages, LIFO batch:0 [ 0.132555] DMA32 zone: 1986 pages used for memmap [ 0.132555] DMA32 zone: 127073 pages, LIFO batch:31 [ 0.134444] p2m virtual area at (____ptrval____), size is 40000000 [ 0.224357] Remapped 97 page(s) [ 0.224836] ACPI: PM-Timer IO Port: 0x1808 [ 0.224842] ACPI: Local APIC address 0xfee00000 [ 0.224873] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.224902] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.224911] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.224913] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.224917] ACPI: IRQ0 used by override. [ 0.224917] ACPI: IRQ9 used by override. [ 0.224924] Using ACPI (MADT) for SMP configuration information [ 0.224928] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.224935] ACPI: SPCR: SPCR table version 1 [ 0.224936] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.224941] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.224953] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.224954] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.224956] [mem 0x20061000-0x9573efff] available for PCI devices [ 0.224958] Booting paravirtualized kernel on Xen [ 0.224959] Xen version: 4.18-unstable (preserve-AD) [ 0.224961] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.309102] random: get_random_bytes called from start_kernel+0x8e/0x594 with crng_init=0 [ 0.309107] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.309402] percpu: Embedded 43 pages/cpu s138264 r8192 d29672 u262144 [ 0.309407] pcpu-alloc: s138264 r8192 d29672 u262144 alloc=1*2097152 [ 0.309408] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.309455] xen: PV spinlocks enabled [ 0.309458] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes) [ 0.309460] Built 1 zonelists, mobility grouping on. Total pages: 129000 [ 0.309461] Kernel command line: placeholder root=/dev/mapper/godello1--vg-root ro net.ifnames=0 console=hvc0 net.ifnames=0 [ 0.309568] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.309588] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.346473] software IO TLB: mapped [mem 0x1b000000-0x1f000000] (64MB) [ 0.348175] Memory: 388244K/524284K available (12312K kernel code, 1274K rwdata, 2652K rodata, 1344K init, 1660K bss, 136040K reserved, 0K cma-reserved) [ 0.348271] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.349290] rcu: Hierarchical RCU implementation. [ 0.349291] rcu: RCU event tracing is enabled. [ 0.349292] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.349293] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.350445] Using NULL legacy PIC [ 0.350447] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 0 [ 0.350482] xen:events: Using FIFO-based ABI [ 0.350503] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.350510] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.350517] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.350523] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.350529] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.350535] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.350541] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.350548] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.350554] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.350560] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.350567] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.350574] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.350580] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.350586] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.350592] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.359754] Console: colour VGA+ 80x25 [ 0.383966] console [tty0] enabled [ 0.384887] console [hvc0] enabled [ 0.385112] ACPI: Core revision 20180810 [ 0.395971] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.396400] Xen: using vcpuop timer interface [ 0.396404] installing Xen timer for CPU 0 [ 0.396707] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c94d83b270, max_idle_ns: 440795286026 ns [ 0.397095] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.67 BogoMIPS (lpj=3092836) [ 0.397423] pid_max: default: 32768 minimum: 301 [ 0.398077] Security Framework initialized [ 0.398284] SELinux: Initializing. [ 0.398536] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.398768] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.399330] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.399545] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.399762] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.400033] Spectre V2 : Mitigation: Full generic retpoline [ 0.400257] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.400577] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.400832] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.401032] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.401249] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.401834] MDS: Mitigation: Clear CPU buffers [ 0.402193] Freeing SMP alternatives memory: 36K [ 0.405103] cpu 0 spinlock event irq 25 [ 0.405679] VPMU disabled by hypervisor. [ 0.406154] Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only. [ 0.407085] rcu: Hierarchical SRCU implementation. [ 0.407899] smp: Bringing up secondary CPUs ... [ 0.408121] installing Xen timer for CPU 1 [ 0.408958] cpu 1 spinlock event irq 37 [ 0.410357] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.411131] installing Xen timer for CPU 2 [ 0.412034] cpu 2 spinlock event irq 44 [ 0.412120] installing Xen timer for CPU 3 [ 0.413275] cpu 3 spinlock event irq 51 [ 0.413628] smp: Brought up 1 node, 4 CPUs [ 0.414033] smpboot: Max logical packages: 2 [ 0.414661] devtmpfs: initialized [ 0.415068] x86/mm: Memory block size: 128MB [ 0.415794] PM: Registering ACPI NVS region [mem 0x95bbf000-0x95fbefff] (4194304 bytes) [ 0.416110] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.417035] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.417717] RTC time: 0:30:31, date: 03/29/23 [ 0.418129] NET: Registered protocol family 16 [ 0.418719] xen:grant_table: Grant tables using version 1 layout [ 0.419046] Grant table initialized [ 0.419723] audit: initializing netlink subsys (disabled) [ 0.420046] audit: type=2000 audit(1680049831.573:1): state=initialized audit_enabled=0 res=1 [ 0.420160] Simple Boot Flag at 0x44 set to 0x1 [ 0.421651] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.422035] ACPI: bus type PCI registered [ 0.422728] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.423042] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 0.463032] random: fast init done [ 0.468551] PCI: Using configuration type 1 for base access [ 0.469091] PCI: Dell System detected, enabling pci=bfsort. [ 0.474293] ACPI: Added _OSI(Module Device) [ 0.474293] ACPI: Added _OSI(Processor Device) [ 0.474638] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.476047] ACPI: Added _OSI(Processor Aggregator Device) [ 0.476644] ACPI: Added _OSI(Linux-Dell-Video) [ 0.477092] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.489155] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.490418] xen: registering gsi 9 triggering 0 polarity 0 [ 0.492380] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.494335] ACPI: Dynamic OEM Table Load: [ 0.494915] ACPI: SSDT 0xFFFF88801A5D5000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120816) [ 0.496506] ACPI: Dynamic OEM Table Load: [ 0.497038] ACPI: SSDT 0xFFFF88801AE4B000 0005AA (v01 PmRef ApIst 00003000 INTL 20120816) [ 0.498395] ACPI: Dynamic OEM Table Load: [ 0.498966] ACPI: SSDT 0xFFFF88801A6FAA00 000119 (v01 PmRef ApCst 00003000 INTL 20120816) [ 0.500963] ACPI: Interpreter enabled [ 0.501054] ACPI: (supports S0 S4 S5) [ 0.501621] ACPI: Using IOAPIC for interrupt routing [ 0.502061] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.503312] ACPI: Enabled 11 GPEs in block 00 to 3F [ 0.524051] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1) [ 0.534085] ACPI: Power Resource [FN00] (off) [ 0.535113] ACPI: Power Resource [FN01] (off) [ 0.536045] ACPI: Power Resource [FN02] (off) [ 0.536110] ACPI: Power Resource [FN03] (off) [ 0.537046] ACPI: Power Resource [FN04] (off) [ 0.538057] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) [ 0.539037] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.540960] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR] [ 0.542033] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.543415] PCI host bridge to bus 0000:00 [ 0.544021] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.544034] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.544611] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.546033] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff window] [ 0.547033] pci_bus 0000:00: root bus resource [bus 00-7e] [ 0.547622] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000 [ 0.548082] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.548172] pci 0000:00:14.0: reg 0x10: [mem 0xa2b00000-0xa2b0ffff 64bit] [ 0.548447] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.549031] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.549031] pci 0000:00:1a.0: reg 0x10: [mem 0xa2b12000-0xa2b123ff] [ 0.549070] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.549288] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.549610] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.549693] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.550040] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.551031] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 [ 0.551176] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.551246] pci 0000:00:1c.2: Enabling MPC IRBNCE [ 0.551823] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled [ 0.553294] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.553375] pci 0000:00:1d.0: reg 0x10: [mem 0xa2b11000-0xa2b113ff] [ 0.553676] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.554031] pci 0000:00:1f.0: [8086:8c52] type 00 class 0x060100 [ 0.554418] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.554498] pci 0000:00:1f.2: reg 0x10: [io 0x3048-0x304f] [ 0.554527] pci 0000:00:1f.2: reg 0x14: [io 0x3054-0x3057] [ 0.554556] pci 0000:00:1f.2: reg 0x18: [io 0x3040-0x3047] [ 0.554586] pci 0000:00:1f.2: reg 0x1c: [io 0x3050-0x3053] [ 0.554615] pci 0000:00:1f.2: reg 0x20: [io 0x3020-0x303f] [ 0.554643] pci 0000:00:1f.2: reg 0x24: [mem 0xa2b10000-0xa2b107ff] [ 0.554809] pci 0000:00:1f.2: PME# supported from D3hot [ 0.555031] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.555084] pci 0000:00:1f.3: reg 0x10: [mem 0xa2b13000-0xa2b130ff 64bit] [ 0.555170] pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f] [ 0.555647] pci 0000:01:00.0: [14e4:165f] type 00 class 0x020000 [ 0.555778] pci 0000:01:00.0: reg 0x10: [mem 0xa2a30000-0xa2a3ffff 64bit pref] [ 0.555846] pci 0000:01:00.0: reg 0x18: [mem 0xa2a40000-0xa2a4ffff 64bit pref] [ 0.555914] pci 0000:01:00.0: reg 0x20: [mem 0xa2a50000-0xa2a5ffff 64bit pref] [ 0.555958] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 0.556428] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.557031] pci 0000:01:00.1: [14e4:165f] type 00 class 0x020000 [ 0.557031] pci 0000:01:00.1: reg 0x10: [mem 0xa2a00000-0xa2a0ffff 64bit pref] [ 0.557031] pci 0000:01:00.1: reg 0x18: [mem 0xa2a10000-0xa2a1ffff 64bit pref] [ 0.557145] pci 0000:01:00.1: reg 0x20: [mem 0xa2a20000-0xa2a2ffff 64bit pref] [ 0.557189] pci 0000:01:00.1: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 0.557632] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold [ 0.558249] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.558860] pci 0000:00:1c.0: bridge window [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.559292] pci 0000:02:00.0: [1912:0013] type 01 class 0x060400 [ 0.562094] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.563559] pci 0000:00:1c.2: PCI bridge to [bus 02-06] [ 0.564057] pci 0000:00:1c.2: bridge window [mem 0xa2000000-0xa29fffff] [ 0.564074] pci 0000:00:1c.2: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.565257] pci 0000:03:00.0: [1912:0013] type 01 class 0x060400 [ 0.568398] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.569912] pci 0000:03:01.0: [1912:0013] type 01 class 0x060400 [ 0.573215] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold [ 0.576370] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 0.577137] pci 0000:02:00.0: bridge window [mem 0xa2000000-0xa29fffff] [ 0.577267] pci 0000:02:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.578458] pci 0000:04:00.0: [1912:0012] type 01 class 0x060400 [ 0.583031] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 0.584256] pci 0000:03:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.584400] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.585470] pci_bus 0000:05: extended config space not accessible [ 0.586267] pci 0000:05:00.0: [102b:0534] type 00 class 0x030000 [ 0.586751] pci 0000:05:00.0: reg 0x10: [mem 0xa1000000-0xa1ffffff pref] [ 0.587011] pci 0000:05:00.0: reg 0x14: [mem 0xa2800000-0xa2803fff] [ 0.587261] pci 0000:05:00.0: reg 0x18: [mem 0xa2000000-0xa27fffff] [ 0.591561] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.592256] pci 0000:04:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.592403] pci 0000:04:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.593847] pci 0000:06:00.0: [1912:0011] type 00 class 0x050000 [ 0.594493] pci 0000:06:00.0: reg 0x10: [mem 0xa2901000-0xa2901fff] [ 0.594757] pci 0000:06:00.0: reg 0x14: [mem 0xa2900000-0xa290007f] [ 0.597028] pci 0000:06:00.0: PME# supported from D3hot [ 0.597789] pci 0000:03:01.0: PCI bridge to [bus 06] [ 0.598256] pci 0000:03:01.0: bridge window [mem 0xa2900000-0xa29fffff] [ 0.599376] pci_bus 0000:00: on NUMA node 0 [ 0.600053] xen: registering gsi 13 triggering 1 polarity 0 [ 0.600632] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.601111] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.601770] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.603113] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.603764] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.604113] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.606096] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.607111] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.608150] xen:balloon: Initialising balloon driver [ 0.609197] pci 0000:05:00.0: vgaarb: setting as boot VGA device [ 0.609801] pci 0000:05:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.610037] pci 0000:05:00.0: vgaarb: bridge control possible [ 0.610610] vgaarb: loaded [ 0.611081] SCSI subsystem initialized [ 0.612059] libata version 3.00 loaded. [ 0.612065] ACPI: bus type USB registered [ 0.613055] usbcore: registered new interface driver usbfs [ 0.613652] usbcore: registered new interface driver hub [ 0.614057] usbcore: registered new device driver usb [ 0.615031] pps_core: LinuxPPS API ver. 1 registered [ 0.615075] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.616037] PTP clock support registered [ 0.617055] EDAC MC: Ver: 3.0.0 [ 0.618745] Advanced Linux Sound Architecture Driver Initialized. [ 0.619047] PCI: Using ACPI for IRQ routing [ 0.635204] PCI: pci_cache_line_size set to 64 bytes [ 0.635833] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.635833] e820: reserve RAM buffer [mem 0x20061000-0x23ffffff] [ 0.635915] NetLabel: Initializing [ 0.636033] NetLabel: domain hash size = 128 [ 0.636634] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.637043] NetLabel: unlabeled traffic allowed by default [ 0.638551] clocksource: Switched to clocksource tsc-early [ 0.645272] VFS: Disk quotas dquot_6.6.0 [ 0.645850] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.646477] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.647531] pnp: PnP ACPI init [ 0.648285] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.648864] system 00:00: [io 0xffff] has been reserved [ 0.649449] system 00:00: [io 0xffff] has been reserved [ 0.650020] system 00:00: [io 0xffff] has been reserved [ 0.650604] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.651213] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.651797] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.651853] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.652436] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.652443] xen: registering gsi 8 triggering 1 polarity 0 [ 0.652483] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.652518] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.653110] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.653417] xen: registering gsi 3 triggering 1 polarity 0 [ 0.653479] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.653694] xen: registering gsi 4 triggering 1 polarity 0 [ 0.653695] Already setup the GSI :4 [ 0.654339] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.654497] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.655083] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.655676] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.656259] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.656837] system 00:06: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.657449] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.658022] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.658695] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved [ 0.659289] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.659864] system 00:06: [mem 0xa0000000-0xa0000fff] has been reserved [ 0.660486] system 00:06: [mem 0xa0020000-0xa002ffff] has been reserved [ 0.661074] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.661973] pnp: PnP ACPI: found 7 devices [ 0.681684] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.683319] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0100000-0xa01fffff] [ 0.683929] pci 0000:01:00.0: BAR 6: assigned [mem 0xa0100000-0xa013ffff pref] [ 0.684973] pci 0000:01:00.1: BAR 6: assigned [mem 0xa0140000-0xa017ffff pref] [ 0.686051] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.686669] pci 0000:00:1c.0: bridge window [mem 0xa0100000-0xa01fffff] [ 0.687357] pci 0000:00:1c.0: bridge window [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.688459] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.689187] pci 0000:04:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.689892] pci 0000:04:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.691149] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 0.691900] pci 0000:03:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.692576] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.693856] pci 0000:03:01.0: PCI bridge to [bus 06] [ 0.694607] pci 0000:03:01.0: bridge window [mem 0xa2900000-0xa29fffff] [ 0.695536] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 0.696287] pci 0000:02:00.0: bridge window [mem 0xa2000000-0xa29fffff] [ 0.696952] pci 0000:02:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.698289] pci 0000:00:1c.2: PCI bridge to [bus 02-06] [ 0.698874] pci 0000:00:1c.2: bridge window [mem 0xa2000000-0xa29fffff] [ 0.699508] pci 0000:00:1c.2: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.700609] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.700610] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.700611] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.700612] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff window] [ 0.700613] pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa01fffff] [ 0.700613] pci_bus 0000:01: resource 2 [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.700614] pci_bus 0000:02: resource 1 [mem 0xa2000000-0xa29fffff] [ 0.700615] pci_bus 0000:02: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.700616] pci_bus 0000:03: resource 1 [mem 0xa2000000-0xa29fffff] [ 0.700617] pci_bus 0000:03: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.700618] pci_bus 0000:04: resource 1 [mem 0xa2000000-0xa28fffff] [ 0.700618] pci_bus 0000:04: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.700619] pci_bus 0000:05: resource 1 [mem 0xa2000000-0xa28fffff] [ 0.700620] pci_bus 0000:05: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.700621] pci_bus 0000:06: resource 1 [mem 0xa2900000-0xa29fffff] [ 0.700700] NET: Registered protocol family 2 [ 0.701467] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes) [ 0.702553] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.703141] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 0.703762] TCP: Hash tables configured (established 4096 bind 4096) [ 0.704355] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.704924] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.705563] NET: Registered protocol family 1 [ 0.706310] RPC: Registered named UNIX socket transport module. [ 0.706922] RPC: Registered udp transport module. [ 0.707504] RPC: Registered tcp transport module. [ 0.708081] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.708877] xen: registering gsi 16 triggering 0 polarity 1 [ 0.708894] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.710218] pci 0000:00:14.0: CONFIG_USB_XHCI_HCD is turned off, defaulting to EHCI. [ 0.711277] pci 0000:00:14.0: USB 3.0 devices will work at USB 2.0 speeds. [ 0.712073] xen: registering gsi 16 triggering 0 polarity 1 [ 0.712075] Already setup the GSI :16 [ 0.724203] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x69a took 11898 usecs [ 0.725334] xen: registering gsi 23 triggering 0 polarity 1 [ 0.725346] xen: --> pirq=23 -> irq=23 (gsi=23) [ 0.738183] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x69a took 12597 usecs [ 0.739720] pci 0000:05:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.752443] pci 0000:05:00.0: pci_fixup_video+0x0/0x110 took 12669 usecs [ 0.753108] PCI: CLS 64 bytes, default 64 [ 0.753130] Unpacking initramfs... [ 1.033812] Freeing initrd memory: 27832K [ 1.034516] kvm: no hardware support [ 1.035099] has_svm: not amd [ 1.035666] kvm: no hardware support [ 1.037065] Scanning for low memory corruption every 60 seconds [ 1.038307] Initialise system trusted keyrings [ 1.038937] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.040833] NFS: Registering the id_resolver key type [ 1.041424] Key type id_resolver registered [ 1.042002] Key type id_legacy registered [ 1.044838] Key type asymmetric registered [ 1.045447] Asymmetric key parser 'x509' registered [ 1.046027] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.047110] io scheduler noop registered [ 1.047673] io scheduler deadline registered [ 1.048268] io scheduler cfq registered (default) [ 1.048845] io scheduler mq-deadline registered [ 1.049422] io scheduler kyber registered [ 1.050239] xen: registering gsi 16 triggering 0 polarity 1 [ 1.050243] Already setup the GSI :16 [ 1.051181] xen: registering gsi 18 triggering 0 polarity 1 [ 1.051189] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.058529] pcieport 0000:00:1c.0: Signaling PME with IRQ 54 [ 1.059181] pcieport 0000:00:1c.2: Signaling PME with IRQ 55 [ 1.059909] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.061001] ACPI: Power Button [PWRF] [ 1.062141] Monitor-Mwait will be used to enter C-1 state [ 1.062145] Monitor-Mwait will be used to enter C-2 state [ 1.062650] Warning: Processor Platform Limit not supported. [ 1.062985] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.063585] ACPI: Thermal Zone [TZ00] (28 C) [ 1.064422] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.064999] ACPI: Thermal Zone [TZ01] (30 C) [ 1.065781] xen:xen_evtchn: Event-channel device installed [ 1.066419] xen_pciback: backend is vpci [ 1.067352] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.089160] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.090634] hpet_acpi_add: no address or irqs in _CRS [ 1.091277] Non-volatile memory driver v1.3 [ 1.091891] AMD IOMMUv2 driver by Joerg Roedel [ 1.092484] AMD IOMMUv2 functionality not available on this system [ 1.094506] loop: module loaded [ 1.097270] ahci 0000:00:1f.2: version 3.0 [ 1.097342] xen: registering gsi 19 triggering 0 polarity 1 [ 1.097357] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.097512] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.098168] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode [ 1.099228] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 1.106447] scsi host0: ahci [ 1.107161] scsi host1: ahci [ 1.107866] scsi host2: ahci [ 1.108590] scsi host3: ahci [ 1.109313] scsi host4: ahci [ 1.109987] scsi host5: ahci [ 1.110666] ata1: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10100 irq 60 [ 1.111728] ata2: DUMMY [ 1.112339] ata3: DUMMY [ 1.112904] ata4: DUMMY [ 1.113513] ata5: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10300 irq 60 [ 1.114653] ata6: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10380 irq 60 [ 1.115823] tun: Universal TUN/TAP device driver, 1.6 [ 1.116465] tg3.c:v3.137 (May 11, 2014) [ 1.117172] xen: registering gsi 16 triggering 0 polarity 1 [ 1.117175] Already setup the GSI :16 [ 1.240560] tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 54:9f:35:05:fd:88 [ 1.241666] tg3 0000:01:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 1.242847] tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 1.243893] tg3 0000:01:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 1.244870] xen: registering gsi 17 triggering 0 polarity 1 [ 1.244884] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.367672] tg3 0000:01:00.1 eth1: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 54:9f:35:05:fd:8a [ 1.368757] tg3 0000:01:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 1.369813] tg3 0000:01:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 1.370982] tg3 0000:01:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit] [ 1.371863] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.372449] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.373040] sky2: driver version 1.30 [ 1.373665] xen_netfront: Initialising Xen virtual ethernet driver [ 1.374327] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.374910] ehci-pci: EHCI PCI platform driver [ 1.375564] xen: registering gsi 16 triggering 0 polarity 1 [ 1.375567] Already setup the GSI :16 [ 1.376199] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.376890] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.377975] ehci-pci 0000:00:1a.0: debug port 2 [ 1.382516] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.382561] ehci-pci 0000:00:1a.0: irq 16, io mem 0xa2b12000 [ 1.390085] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.390725] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.391783] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.392868] usb usb1: Product: EHCI Host Controller [ 1.393449] usb usb1: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.394028] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.394748] hub 1-0:1.0: USB hub found [ 1.395364] hub 1-0:1.0: 2 ports detected [ 1.396109] xen: registering gsi 23 triggering 0 polarity 1 [ 1.396112] Already setup the GSI :23 [ 1.396748] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.397440] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.398562] ehci-pci 0000:00:1d.0: debug port 2 [ 1.403205] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.403250] ehci-pci 0000:00:1d.0: irq 23, io mem 0xa2b11000 [ 1.410053] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.410679] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.411751] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.412837] usb usb2: Product: EHCI Host Controller [ 1.413509] usb usb2: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.414119] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.414791] hub 2-0:1.0: USB hub found [ 1.415411] hub 2-0:1.0: 2 ports detected [ 1.416101] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.416680] ohci-pci: OHCI PCI platform driver [ 1.417299] uhci_hcd: USB Universal Host Controller Interface driver [ 1.417896] usbcore: registered new interface driver usblp [ 1.418525] usbcore: registered new interface driver usb-storage [ 1.419127] i8042: PNP: No PS/2 controller found. [ 1.419797] rtc_cmos 00:02: RTC can wake from S4 [ 1.419798] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.421271] rtc_cmos 00:02: registered as rtc0 [ 1.421891] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram [ 1.422564] xen: registering gsi 18 triggering 0 polarity 1 [ 1.422566] Already setup the GSI :18 [ 1.423274] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.427285] device-mapper: uevent: version 1.0.3 [ 1.427956] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.429037] hidraw: raw HID events driver (C) Jiri Kosina [ 1.429753] usbcore: registered new interface driver usbhid [ 1.430338] usbhid: USB HID core driver [ 1.431476] Initializing XFRM netlink socket [ 1.432162] NET: Registered protocol family 10 [ 1.432936] Segment Routing with IPv6 [ 1.433825] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.434495] NET: Registered protocol family 17 [ 1.435086] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.436204] Key type dns_resolver registered [ 1.436999] mce: Using 2 MCE banks [ 1.437597] sched_clock: Marking stable (1391144479, 46432089)->(1459934226, -22357658) [ 1.439214] registered taskstats version 1 [ 1.439786] Loading compiled-in X.509 certificates [ 1.440688] Magic number: 15:634:507 [ 1.441332] console [netcon0] enabled [ 1.442027] netconsole: network logging started [ 1.442790] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.450636] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.451267] ALSA device list: [ 1.451840] No soundcards found. [ 1.452472] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 1.453544] cfg80211: failed to load regulatory.db [ 1.467388] ata1.00: ATA-8: TOSHIBA MG03ACA100, FL1D, max UDMA/100 [ 1.467976] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.469609] ata1.00: configured for UDMA/100 [ 1.470375] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MG03ACA1 FL1D PQ: 0 ANSI: 5 [ 1.471565] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.471584] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.472665] sd 0:0:0:0: [sda] Write Protect is off [ 1.473828] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.473834] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.662511] sda: sda1 sda2 < sda5 > [ 1.663531] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.718087] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.742091] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.778318] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.781595] ata5.00: ATAPI: HL-DT-ST DVD+/-RW GTA0N, A3B0, max UDMA/100 [ 1.786367] ata5.00: configured for UDMA/100 [ 1.791509] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD+-RW GTA0N A3B0 PQ: 0 ANSI: 5 [ 1.833615] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.846037] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.846507] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.846789] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.847644] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.847897] hub 1-1:1.0: USB hub found [ 1.848349] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 1.848865] hub 1-1:1.0: 4 ports detected [ 1.870814] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.871847] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.872620] hub 2-1:1.0: USB hub found [ 1.873414] hub 2-1:1.0: 6 ports detected [ 2.092085] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c94d83b270, max_idle_ns: 440795286026 ns [ 2.093139] clocksource: Switched to clocksource tsc [ 2.148090] usb 2-1.5: new high-speed USB device number 3 using ehci-pci [ 2.154472] ata6: SATA link down (SStatus 0 SControl 300) [ 2.155775] Freeing unused kernel image memory: 1344K [ 2.161096] Write protecting the kernel read-only data: 18432k [ 2.172906] Freeing unused kernel image memory: 1992K [ 2.174262] Freeing unused kernel image memory: 1444K [ 2.174833] Run /init as init process [ 2.227966] usb 2-1.5: New USB device found, idVendor=0624, idProduct=0248, bcdDevice= 0.00 [ 2.229002] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.230030] usb 2-1.5: Product: Gadget USB HUB [ 2.230575] usb 2-1.5: Manufacturer: no manufacturer [ 2.231127] usb 2-1.5: SerialNumber: 0123456789 [ 2.231978] hub 2-1.5:1.0: USB hub found [ 2.232710] hub 2-1.5:1.0: 6 ports detected [ 2.526097] usb 2-1.5.1: new high-speed USB device number 4 using ehci-pci [ 2.563046] random: crng init done [ 2.615965] usb 2-1.5.1: New USB device found, idVendor=0624, idProduct=0249, bcdDevice= 0.00 [ 2.617046] usb 2-1.5.1: New USB device strings: Mfr=4, Product=5, SerialNumber=6 [ 2.618079] usb 2-1.5.1: Product: Keyboard/Mouse Function [ 2.618624] usb 2-1.5.1: Manufacturer: Avocent [ 2.619184] usb 2-1.5.1: SerialNumber: 20120917 [ 2.625660] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.1/2-1.5.1:1.0/0003:0624:0249.0001/input/input1 [ 2.679188] hid-generic 0003:0624:0249.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-0000:00:1d.0-1.5.1/input0 [ 2.681260] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.1/2-1.5.1:1.1/0003:0624:0249.0002/input/input2 [ 2.682368] hid-generic 0003:0624:0249.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:1d.0-1.5.1/input1 [ 2.684231] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.1/2-1.5.1:1.2/0003:0624:0249.0003/input/input3 [ 2.685317] hid-generic 0003:0624:0249.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:1d.0-1.5.1/input2 [ 2.838754] PM: Image not found (code -22) [ 3.024932] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.031226] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 4.580734] systemd-udevd[1581]: Network interface NamePolicy= disabled on kernel command line, ignoring. [ 4.889936] systemd-udevd[1606]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 4.890015] systemd-udevd[1594]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 4.915130] systemd-udevd[1606]: Process 'ifupdown-hotplug' failed with exit code 1. [ 4.915238] systemd-udevd[1594]: Process 'ifupdown-hotplug' failed with exit code 1. [ 4.933006] systemd-udevd[1592]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 4.933011] systemd-udevd[1594]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 4.936018] systemd-udevd[1593]: Process '/etc/console-setup/cached_setup_font.sh' failed with exit code 1. [ 4.938940] systemd-udevd[1592]: Process 'ifupdown-hotplug' failed with exit code 1. [ 4.939799] systemd-udevd[1594]: Process 'ifupdown-hotplug' failed with exit code 1. [ 7.094100] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 8.059987] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 8.121745] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 8.196162] Adding 1949692k swap on /dev/mapper/godello1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 8.712719] xenbr0: port 1(eth0) entered blocking state [ 8.713375] xenbr0: port 1(eth0) entered disabled state [ 8.714000] device eth0 entered promiscuous mode [ 8.867549] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready