[ 0.000000] Reserving virtual address space above 0xfdc00000 (rounded to 0xfdc00000) [ 0.000000] Linux version 4.19.80+ (osstest@nobling0) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Tue Oct 31 04:00:38 UTC 2023 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020060fff] usable [ 0.000000] Xen: [mem 0x00000000bf699000-0x00000000bf6aefff] reserved [ 0.000000] Xen: [mem 0x00000000bf6af000-0x00000000bf6cdfff] ACPI data [ 0.000000] Xen: [mem 0x00000000bf6ce000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] Xen: [mem 0x00000000fe000000-0x00000000fec8ffff] reserved [ 0.000000] Xen: [mem 0x00000000fec94000-0x00000000feccffff] reserved [ 0.000000] Xen: [mem 0x00000000fecd4000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Dell Inc. PowerEdge R415/0YFVT1, BIOS 2.2.1 09/16/2013 [ 0.000000] Hypervisor detected: Xen PV [ 0.033506] tsc: Fast TSC calibration using PIT [ 0.033510] tsc: Detected 2799.963 MHz processor [ 0.033512] tsc: Detected 2800.030 MHz TSC [ 0.050921] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.050927] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.050933] last_pfn = 0x20061 max_arch_pfn = 0x1000000 [ 0.050937] Disabled [ 0.050939] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.050948] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.050991] Scanning 1 areas for low memory corruption [ 0.050993] initial memory mapped: [mem 0x00000000-0x02bfefff] [ 0.051318] BRK [0x01d7d000, 0x01d7dfff] PGTABLE [ 0.197342] BRK [0x01d7e000, 0x01d7efff] PGTABLE [ 0.197469] BRK [0x01d7f000, 0x01d7ffff] PGTABLE [ 0.197516] RAMDISK: [mem 0x04000000-0x05bcafff] [ 0.197538] ACPI: Early table checksum verification disabled [ 0.212277] ACPI: RSDP 0x00000000000F1010 000024 (v02 DELL ) [ 0.212289] ACPI: XSDT 0x00000000000F1098 0000A4 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.212343] ACPI: FACP 0x00000000BF6BBD3C 0000F4 (v03 DELL PE_SC3 00000001 DELL 00000001) [ 0.212461] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 16, using default 8 (20180810/tbfadt-674) [ 0.212474] ACPI: DSDT 0x00000000BF6AF000 0065E6 (v01 DELL PE_SC3 00000001 INTL 20050624) [ 0.212485] ACPI: FACS 0x00000000BF6BE000 000040 [ 0.212496] ACPI: FACS 0x00000000BF6BE000 000040 [ 0.212510] ACPI: APIC 0x00000000BF6BB478 000254 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.212523] ACPI: SPCR 0x00000000BF6BB6DC 000050 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.212535] ACPI: HPET 0x00000000BF6BB730 000038 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.212547] ACPI: MCFG 0x00000000BF6BB76C 00003C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.212559] ACPI: WD__ 0x00000000BF6BB7AC 000134 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.212573] ACPI: SLIC 0x00000000BF6BB8E4 000024 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.212586] ACPI: ERST 0x00000000BF6B5788 000270 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.212598] ACPI: HEST 0x00000000BF6B59F8 000354 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.212610] ACPI: BERT 0x00000000BF6B55E8 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.212622] ACPI: EINJ 0x00000000BF6B5618 000170 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.212635] ACPI: IVRS 0x00000000BF6BBA68 0000B8 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.212648] ACPI: SRAT 0x00000000BF6BBB24 000150 (v02 AMD AGESA 00000001 AMD 00000001) [ 0.212661] ACPI: SLIT 0x00000000BF6BBCA0 000030 (v01 AMD AGESA 00000001 AMD 00000001) [ 0.212674] ACPI: SS__ 0x00000000BF6BF000 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.212687] ACPI: TCPA 0x00000000BF6BBCD4 000064 (v02 DELL PE_SC3 00000001 DELL 00000001) [ 0.212727] ACPI: Local APIC address 0xfee00000 [ 0.212730] Switched to APIC driver `Xen PV'. [ 0.212776] 0MB HIGHMEM available. [ 0.212778] 512MB LOWMEM available. [ 0.212779] mapped low ram: 0 - 20061000 [ 0.212780] low ram: 0 - 20061000 [ 0.212787] BRK [0x01d80000, 0x01d80fff] PGTABLE [ 0.212809] Zone ranges: [ 0.212812] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.212814] Normal [mem 0x0000000001000000-0x0000000020060fff] [ 0.212816] HighMem empty [ 0.212818] Movable zone start for each node [ 0.212819] Early memory node ranges [ 0.212821] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.212822] node 0: [mem 0x0000000000100000-0x0000000020060fff] [ 0.212825] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020060fff] [ 0.212829] On node 0 totalpages: 131071 [ 0.215052] DMA zone: 32 pages used for memmap [ 0.215055] DMA zone: 0 pages reserved [ 0.215056] DMA zone: 3998 pages, LIFO batch:0 [ 0.215164] Normal zone: 993 pages used for memmap [ 0.215165] Normal zone: 127073 pages, LIFO batch:31 [ 0.217938] p2m virtual area at (ptrval), size is 400000 [ 0.218505] BRK [0x01d81000, 0x01d81fff] PGTABLE [ 0.219415] BRK [0x01d82000, 0x01d82fff] PGTABLE [ 0.220674] Remapped 97 page(s) [ 0.220680] Using APIC driver Xen PV [ 0.221136] ACPI: PM-Timer IO Port: 0x808 [ 0.221142] ACPI: Local APIC address 0xfee00000 [ 0.221144] Switched to APIC driver `Xen PV'. [ 0.221330] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.221388] IOAPIC[0]: apic_id 12, version 33, address 0xfec00000, GSI 0-23 [ 0.221396] IOAPIC[1]: apic_id 13, version 33, address 0xfec80000, GSI 24-55 [ 0.221433] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.221441] ACPI: IRQ0 used by override. [ 0.221442] ACPI: IRQ9 used by override. [ 0.221475] Using ACPI (MADT) for SMP configuration information [ 0.221480] ACPI: HPET id: 0x43538301 base: 0xfed00000 [ 0.221487] ACPI: SPCR: SPCR table version 1 [ 0.221492] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.221502] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.221525] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.221527] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.221529] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.221533] [mem 0x20061000-0xbf698fff] available for PCI devices [ 0.221538] Booting paravirtualized kernel on Xen [ 0.221539] Xen version: 4.19-unstable (preserve-AD) [ 0.221547] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.221570] random: get_random_bytes called from start_kernel+0x74/0x3f3 with crng_init=0 [ 0.221579] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.222261] percpu: Embedded 29 pages/cpu s86924 r0 d31860 u118784 [ 0.222269] pcpu-alloc: s86924 r0 d31860 u118784 alloc=29*4096 [ 0.222270] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.222401] xen: PV spinlocks enabled [ 0.222408] PV qspinlock hash table entries: 512 (order: 0, 4096 bytes) [ 0.222416] Built 1 zonelists, mobility grouping on. Total pages: 130046 [ 0.222420] Kernel command line: placeholder root=/dev/mapper/nocera1--vg-root ro net.ifnames=0 console=hvc0 net.ifnames=0 [ 0.222703] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.222773] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.222860] Initializing CPU#0 [ 0.314515] software IO TLB: mapped [mem 0x1b9fd000-0x1f9fd000] (64MB) [ 0.314529] Initializing HighMem for node 0 (00000000:00000000) [ 0.317686] Memory: 408928K/524284K available (8996K kernel code, 829K rwdata, 2332K rodata, 840K init, 548K bss, 115356K reserved, 0K cma-reserved, 0K highmem) [ 0.317694] virtual kernel memory layout: fixmap : 0xfdb16000 - 0xfdbff000 ( 932 kB) cpu_entry : 0xfd600000 - 0xfd739000 (1252 kB) pkmap : 0xfd200000 - 0xfd400000 (2048 kB) vmalloc : 0xe0861000 - 0xfd1fe000 ( 457 MB) lowmem : 0xc0000000 - 0xe0061000 ( 512 MB) .init : 0xc1c11000 - 0xc1ce3000 ( 840 kB) .data : 0xc18c91c8 - 0xc1be7600 (3193 kB) .text : 0xc1000000 - 0xc18c91c8 (8996 kB) [ 0.317699] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.317843] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.318055] rcu: Hierarchical RCU implementation. [ 0.318057] rcu: RCU event tracing is enabled. [ 0.318390] Using NULL legacy PIC [ 0.318392] NR_IRQS: 2304, nr_irqs: 1032, preallocated irqs: 0 [ 0.318464] xen:events: Using FIFO-based ABI [ 0.318480] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.318525] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.318530] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.318535] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.318539] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.318543] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.318547] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.318552] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.318556] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.318560] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.318565] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.318569] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.318574] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.318578] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.318583] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.318590] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.325612] Console: colour VGA+ 80x25 [ 0.345691] console [tty0] enabled [ 0.346335] console [hvc0] enabled [ 0.346508] ACPI: Core revision 20180810 [ 0.353496] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.353798] Xen: using vcpuop timer interface [ 0.353807] installing Xen timer for CPU 0 [ 0.354099] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c5d1eb9c, max_idle_ns: 440795334678 ns [ 0.354478] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.06 BogoMIPS (lpj=2800030) [ 0.354770] pid_max: default: 32768 minimum: 301 [ 0.354968] Security Framework initialized [ 0.355445] SELinux: Initializing. [ 0.355642] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.355823] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.356396] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.356434] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.356610] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.356888] Spectre V2 : Mitigation: Full AMD retpoline [ 0.357058] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.357659] Freeing SMP alternatives memory: 36K [ 0.360675] cpu 0 spinlock event irq 57 [ 0.360852] VPMU disabled by hypervisor. [ 0.361207] Performance Events: PMU not available due to virtualization, using software events only. [ 0.361527] rcu: Hierarchical SRCU implementation. [ 0.361944] smp: Bringing up secondary CPUs ... [ 0.362234] installing Xen timer for CPU 1 [ 0.362460] CPU 1 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036827] Initializing CPU#1 [ 0.362795] cpu 1 spinlock event irq 69 [ 0.363593] installing Xen timer for CPU 2 [ 0.363828] CPU 2 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036827] Initializing CPU#2 [ 0.364156] cpu 2 spinlock event irq 76 [ 0.364542] installing Xen timer for CPU 3 [ 0.364760] CPU 3 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036827] Initializing CPU#3 [ 0.365043] cpu 3 spinlock event irq 83 [ 0.365544] installing Xen timer for CPU 4 [ 0.365759] CPU 4 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036827] Initializing CPU#4 [ 0.366507] cpu 4 spinlock event irq 90 [ 0.366853] installing Xen timer for CPU 5 [ 0.366853] CPU 5 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036827] Initializing CPU#5 [ 0.367509] cpu 5 spinlock event irq 97 [ 0.367851] installing Xen timer for CPU 6 [ 0.367851] CPU 6 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036827] Initializing CPU#6 [ 0.368641] cpu 6 spinlock event irq 104 [ 0.368905] installing Xen timer for CPU 7 [ 0.369499] CPU 7 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036827] Initializing CPU#7 [ 0.369709] cpu 7 spinlock event irq 111 [ 0.369846] smp: Brought up 1 node, 8 CPUs [ 0.370440] smpboot: Max logical packages: 1 [ 0.370816] devtmpfs: initialized [ 0.371918] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.372443] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.372855] RTC time: 6:33:30, date: 10/31/23 [ 0.373235] NET: Registered protocol family 16 [ 0.373435] xen:grant_table: Grant tables using version 1 layout [ 0.374458] Grant table initialized [ 0.375020] audit: initializing netlink subsys (disabled) [ 0.375211] audit: type=2000 audit(1698734011.138:1): state=initialized audit_enabled=0 res=1 [ 0.375640] node 0 link 1: io port [e000, ffff] [ 0.375640] TOM: 00000000c0000000 aka 3072M [ 0.375653] node 0 link 1: mmio [e9800000, e9ffffff] [ 0.375660] node 0 link 1: mmio [ea000000, ef2fffff] [ 0.375671] node 0 link 1: mmio [fec80000, fecbffff] [ 0.375675] TOM2: 0000000840000000 aka 33792M [ 0.375845] bus: [bus 00-3f] on node 0 link 1 [ 0.375847] bus: 00 [io 0x0000-0xffff] [ 0.375849] bus: 00 [mem 0xc0000000-0xfec7ffff] [ 0.375850] bus: 00 [mem 0xfec80000-0xffffffff] [ 0.375850] bus: 00 [mem 0x840000000-0xfcffffffff] [ 0.376607] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.376889] ACPI: bus type PCI registered [ 0.377580] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.377763] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.377939] PCI: Using MMCONFIG for extended config space [ 0.378105] PCI: Using configuration type 1 for base access [ 0.380886] random: fast init done [ 0.384660] ACPI: Added _OSI(Module Device) [ 0.384660] ACPI: Added _OSI(Processor Device) [ 0.384660] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.384800] ACPI: Added _OSI(Processor Aggregator Device) [ 0.384970] ACPI: Added _OSI(Linux-Dell-Video) [ 0.385133] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.389277] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.389791] xen: registering gsi 9 triggering 0 polarity 1 [ 0.390257] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.394303] ACPI: Interpreter enabled [ 0.394465] ACPI: (supports S0 S4 S5) [ 0.394635] ACPI: Using IOAPIC for interrupt routing [ 0.394869] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.395467] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.415015] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.415213] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.416199] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR] [ 0.416434] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.418910] PCI host bridge to bus 0000:00 [ 0.419081] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.419255] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.419428] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.419435] pci_bus 0000:00: root bus resource [io 0xe000-0xffff window] [ 0.419640] pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff window] [ 0.419812] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.420086] pci_bus 0000:00: root bus resource [mem 0xfec00000-0xfec7ffff window] [ 0.420356] pci_bus 0000:00: root bus resource [mem 0xfec80000-0xfecbffff window] [ 0.420434] pci_bus 0000:00: root bus resource [mem 0xea000000-0xef2fffff window] [ 0.420739] pci_bus 0000:00: root bus resource [mem 0xe9800000-0xe9ffffff window] [ 0.421010] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.421287] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.421491] pci 0000:00:00.0: [1002:5a12] type 00 class 0x060000 [ 0.421865] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 [ 0.422165] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.422248] pci 0000:00:02.0: enabling Extended Tags [ 0.422510] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.422705] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 0.422787] pci 0000:00:09.0: enabling Extended Tags [ 0.423040] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.423205] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.423256] pci 0000:00:11.0: reg 0x10: [io 0xecd0-0xecd7] [ 0.423277] pci 0000:00:11.0: reg 0x14: [io 0xecf0-0xecf3] [ 0.423298] pci 0000:00:11.0: reg 0x18: [io 0xecd8-0xecdf] [ 0.423318] pci 0000:00:11.0: reg 0x1c: [io 0xecf4-0xecf7] [ 0.423341] pci 0000:00:11.0: reg 0x20: [io 0xecb0-0xecbf] [ 0.423371] pci 0000:00:11.0: reg 0x24: [mem 0xef2ff800-0xef2ffbff] [ 0.423419] pci 0000:00:11.0: set SATA to AHCI mode [ 0.423611] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.423651] pci 0000:00:12.0: reg 0x10: [mem 0xef2fb000-0xef2fbfff] [ 0.423905] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.423945] pci 0000:00:12.1: reg 0x10: [mem 0xef2fc000-0xef2fcfff] [ 0.424469] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.424469] pci 0000:00:12.2: reg 0x10: [mem 0xef2ffe00-0xef2ffeff] [ 0.424469] pci 0000:00:12.2: supports D1 D2 [ 0.424469] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.424540] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.424594] pci 0000:00:13.0: reg 0x10: [mem 0xef2fd000-0xef2fdfff] [ 0.424814] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.424854] pci 0000:00:13.1: reg 0x10: [mem 0xef2fe000-0xef2fefff] [ 0.425109] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.425156] pci 0000:00:13.2: reg 0x10: [mem 0xef2fff00-0xef2fffff] [ 0.425340] pci 0000:00:13.2: supports D1 D2 [ 0.425341] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.425478] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.425788] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018f [ 0.425832] pci 0000:00:14.1: reg 0x10: [io 0xece0-0xece7] [ 0.425853] pci 0000:00:14.1: reg 0x14: [io 0xecf8-0xecfb] [ 0.425873] pci 0000:00:14.1: reg 0x18: [io 0xece8-0xecef] [ 0.425892] pci 0000:00:14.1: reg 0x1c: [io 0xecfc-0xecff] [ 0.425912] pci 0000:00:14.1: reg 0x20: [io 0xecc0-0xeccf] [ 0.426138] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.426451] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.426633] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.426852] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.427031] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.427455] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.427455] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.427553] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 [ 0.427772] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 [ 0.427935] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 [ 0.428101] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 [ 0.428455] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 [ 0.428604] pci 0000:01:00.0: [1000:0072] type 00 class 0x010700 [ 0.428642] pci 0000:01:00.0: reg 0x10: [io 0xfc00-0xfcff] [ 0.428669] pci 0000:01:00.0: reg 0x14: [mem 0xef1f0000-0xef1fffff 64bit] [ 0.428695] pci 0000:01:00.0: reg 0x1c: [mem 0xef180000-0xef1bffff 64bit] [ 0.428742] pci 0000:01:00.0: reg 0x30: [mem 0xef000000-0xef0fffff pref] [ 0.428757] pci 0000:01:00.0: enabling Extended Tags [ 0.429046] pci 0000:01:00.0: supports D1 D2 [ 0.429185] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.429362] pci 0000:00:02.0: bridge window [io 0xf000-0xffff] [ 0.429367] pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff] [ 0.429493] pci 0000:02:00.0: [14e4:163b] type 00 class 0x020000 [ 0.429549] pci 0000:02:00.0: reg 0x10: [mem 0xea000000-0xebffffff 64bit] [ 0.429816] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.429882] pci 0000:02:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x2 link at 0000:00:09.0 (capable of 8.000 Gb/s with 2.5 GT/s x4 link) [ 0.430319] pci 0000:02:00.1: [14e4:163b] type 00 class 0x020000 [ 0.430378] pci 0000:02:00.1: reg 0x10: [mem 0xec000000-0xedffffff 64bit] [ 0.430620] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 0.430802] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.430981] pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff] [ 0.431041] pci_bus 0000:03: extended config space not accessible [ 0.431271] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 [ 0.431314] pci 0000:03:04.0: reg 0x10: [mem 0xe9800000-0xe9ffffff pref] [ 0.431337] pci 0000:03:04.0: reg 0x14: [mem 0xeeffc000-0xeeffffff] [ 0.431360] pci 0000:03:04.0: reg 0x18: [mem 0xee000000-0xee7fffff] [ 0.431671] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.431856] pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff] [ 0.431863] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref] [ 0.431866] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.431867] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.431868] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.431870] pci 0000:00:14.4: bridge window [io 0xe000-0xffff window] (subtractive decode) [ 0.431871] pci 0000:00:14.4: bridge window [io 0x0d00-0x0fff window] (subtractive decode) [ 0.431873] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.431874] pci 0000:00:14.4: bridge window [mem 0xfec00000-0xfec7ffff window] (subtractive decode) [ 0.431875] pci 0000:00:14.4: bridge window [mem 0xfec80000-0xfecbffff window] (subtractive decode) [ 0.431877] pci 0000:00:14.4: bridge window [mem 0xea000000-0xef2fffff window] (subtractive decode) [ 0.431878] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff window] (subtractive decode) [ 0.431879] pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.431924] pci_bus 0000:00: on NUMA node 0 [ 0.432069] xen: registering gsi 13 triggering 1 polarity 0 [ 0.434179] ACPI: PCI Interrupt Link [LN24] (IRQs *24) [ 0.434452] ACPI: PCI Interrupt Link [LN25] (IRQs *25) [ 0.434750] ACPI: PCI Interrupt Link [LN26] (IRQs *26) [ 0.435017] ACPI: PCI Interrupt Link [LN27] (IRQs *27) [ 0.435281] ACPI: PCI Interrupt Link [LN28] (IRQs *28) [ 0.435525] ACPI: PCI Interrupt Link [LN29] (IRQs *29) [ 0.435794] ACPI: PCI Interrupt Link [LN30] (IRQs *30) [ 0.436062] ACPI: PCI Interrupt Link [LN31] (IRQs *31) [ 0.436335] ACPI: PCI Interrupt Link [LN32] (IRQs *32) [ 0.436527] ACPI: PCI Interrupt Link [LN33] (IRQs *33) [ 0.436792] ACPI: PCI Interrupt Link [LN34] (IRQs *34) [ 0.437105] ACPI: PCI Interrupt Link [LN35] (IRQs *35) [ 0.437377] ACPI: PCI Interrupt Link [LN36] (IRQs *36) [ 0.437527] ACPI: PCI Interrupt Link [LN37] (IRQs *37) [ 0.437795] ACPI: PCI Interrupt Link [LN38] (IRQs *38) [ 0.438059] ACPI: PCI Interrupt Link [LN39] (IRQs *39) [ 0.438331] ACPI: PCI Interrupt Link [LN40] (IRQs *40) [ 0.438531] ACPI: PCI Interrupt Link [LN41] (IRQs *41) [ 0.438795] ACPI: PCI Interrupt Link [LN42] (IRQs *42) [ 0.439059] ACPI: PCI Interrupt Link [LN43] (IRQs *43) [ 0.439349] ACPI: PCI Interrupt Link [LN44] (IRQs *44) [ 0.439533] ACPI: PCI Interrupt Link [LN45] (IRQs *45) [ 0.439798] ACPI: PCI Interrupt Link [LN46] (IRQs *46) [ 0.440070] ACPI: PCI Interrupt Link [LN47] (IRQs *47) [ 0.440360] ACPI: PCI Interrupt Link [LN48] (IRQs *48) [ 0.440530] ACPI: PCI Interrupt Link [LN49] (IRQs *49) [ 0.440806] ACPI: PCI Interrupt Link [LN50] (IRQs *50) [ 0.441063] ACPI: PCI Interrupt Link [LN51] (IRQs *51) [ 0.441325] ACPI: PCI Interrupt Link [LN52] (IRQs *52) [ 0.441527] ACPI: PCI Interrupt Link [LN53] (IRQs *53) [ 0.441790] ACPI: PCI Interrupt Link [LN54] (IRQs *54) [ 0.442075] ACPI: PCI Interrupt Link [LN55] (IRQs *55) [ 0.442560] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 *14 15) [ 0.442881] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.443192] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.443514] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 *6 7 10 11 14 15) [ 0.443850] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.444154] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 11 14 15) *0 [ 0.444461] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.444810] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.445528] xen:balloon: Initialising balloon driver [ 0.445633] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.445814] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.446583] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.446752] vgaarb: loaded [ 0.447545] SCSI subsystem initialized [ 0.447792] libata version 3.00 loaded. [ 0.447792] ACPI: bus type USB registered [ 0.448455] usbcore: registered new interface driver usbfs [ 0.448455] usbcore: registered new interface driver hub [ 0.448793] usbcore: registered new device driver usb [ 0.449003] pps_core: LinuxPPS API ver. 1 registered [ 0.449166] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.449536] PTP clock support registered [ 0.449709] EDAC MC: Ver: 3.0.0 [ 0.450607] Advanced Linux Sound Architecture Driver Initialized. [ 0.450843] PCI: Using ACPI for IRQ routing [ 0.456607] PCI: pci_cache_line_size set to 64 bytes [ 0.456774] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.456950] Expanded resource Reserved due to conflict with Reserved [ 0.457125] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.457128] e820: reserve RAM buffer [mem 0x20061000-0x23ffffff] [ 0.457322] NetLabel: Initializing [ 0.457434] NetLabel: domain hash size = 128 [ 0.457602] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.457798] NetLabel: unlabeled traffic allowed by default [ 0.458508] clocksource: Switched to clocksource tsc-early [ 0.473187] VFS: Disk quotas dquot_6.6.0 [ 0.473462] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.473682] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.474054] pnp: PnP ACPI init [ 0.474503] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.474541] xen: registering gsi 8 triggering 1 polarity 0 [ 0.474583] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.475028] xen: registering gsi 4 triggering 1 polarity 0 [ 0.475030] Already setup the GSI :4 [ 0.475315] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.475725] xen: registering gsi 3 triggering 1 polarity 0 [ 0.475830] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.477350] system 00:04: [io 0x0800-0x087f] has been reserved [ 0.477538] system 00:04: [io 0x0900-0x093f] has been reserved [ 0.477712] system 00:04: [io 0x0d00-0x0dfe] has been reserved [ 0.477889] system 00:04: [io 0x0dff] has been reserved [ 0.478129] system 00:04: [io 0x0e00-0x0efe] has been reserved [ 0.478301] system 00:04: [io 0x0eff] has been reserved [ 0.478475] system 00:04: [io 0x040b] has been reserved [ 0.478649] system 00:04: [io 0x04d6] has been reserved [ 0.478822] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.479003] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.479178] system 00:04: [io 0x0c14] has been reserved [ 0.479373] system 00:04: [io 0x0c50-0x0c52] has been reserved [ 0.479575] system 00:04: [io 0x0c6c] has been reserved [ 0.479746] system 00:04: [io 0x0c6f] has been reserved [ 0.479917] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 0.480094] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 0.480268] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 0.480484] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 0.480658] system 00:04: [io 0x0cd8-0x0cdb] has been reserved [ 0.480874] system 00:04: [io 0x0cdc-0x0cdf] has been reserved [ 0.481053] system 00:04: [io 0x0ca0-0x0ca7] has been reserved [ 0.481225] system 00:04: [io 0x0ca9-0x0cab] has been reserved [ 0.481397] system 00:04: [io 0x0cad-0x0caf] has been reserved [ 0.481577] system 00:04: [io 0x0cb0-0x0cb7] has been reserved [ 0.481777] system 00:04: [io 0x0950] has been reserved [ 0.481960] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.482047] pnp 00:05: [irq 0 disabled] [ 0.482099] system 00:05: [io 0x0ca8] has been reserved [ 0.482297] system 00:05: [io 0x0cac] has been reserved [ 0.482484] system 00:05: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active) [ 0.483905] system 00:06: [mem 0xfec90000-0xfec93fff] has been reserved [ 0.484093] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.484392] pnp: PnP ACPI: found 7 devices [ 0.501557] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.501835] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.502014] pci 0000:00:02.0: bridge window [io 0xf000-0xffff] [ 0.502195] pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff] [ 0.502389] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.502596] pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff] [ 0.502785] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.502977] pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff] [ 0.503160] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref] [ 0.503461] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.503462] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.503464] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.503466] pci_bus 0000:00: resource 7 [io 0xe000-0xffff window] [ 0.503468] pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff window] [ 0.503469] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.503470] pci_bus 0000:00: resource 10 [mem 0xfec00000-0xfec7ffff window] [ 0.503473] pci_bus 0000:00: resource 11 [mem 0xfec80000-0xfecbffff window] [ 0.503474] pci_bus 0000:00: resource 12 [mem 0xea000000-0xef2fffff window] [ 0.503475] pci_bus 0000:00: resource 13 [mem 0xe9800000-0xe9ffffff window] [ 0.503477] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff window] [ 0.503478] pci_bus 0000:01: resource 0 [io 0xf000-0xffff] [ 0.503480] pci_bus 0000:01: resource 1 [mem 0xef000000-0xef1fffff] [ 0.503481] pci_bus 0000:02: resource 1 [mem 0xea000000-0xedffffff] [ 0.503483] pci_bus 0000:03: resource 1 [mem 0xee000000-0xeeffffff] [ 0.503484] pci_bus 0000:03: resource 2 [mem 0xe9800000-0xe9ffffff pref] [ 0.503486] pci_bus 0000:03: resource 4 [io 0x0000-0x03af window] [ 0.503487] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7 window] [ 0.503488] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df window] [ 0.503490] pci_bus 0000:03: resource 7 [io 0xe000-0xffff window] [ 0.503491] pci_bus 0000:03: resource 8 [io 0x0d00-0x0fff window] [ 0.503492] pci_bus 0000:03: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.503494] pci_bus 0000:03: resource 10 [mem 0xfec00000-0xfec7ffff window] [ 0.503495] pci_bus 0000:03: resource 11 [mem 0xfec80000-0xfecbffff window] [ 0.503497] pci_bus 0000:03: resource 12 [mem 0xea000000-0xef2fffff window] [ 0.503498] pci_bus 0000:03: resource 13 [mem 0xe9800000-0xe9ffffff window] [ 0.503499] pci_bus 0000:03: resource 14 [mem 0xfed40000-0xfed44fff window] [ 0.503619] NET: Registered protocol family 2 [ 0.504055] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.504343] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.504565] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.506881] TCP: Hash tables configured (established 4096 bind 4096) [ 0.507115] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.507296] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.507571] NET: Registered protocol family 1 [ 0.508293] RPC: Registered named UNIX socket transport module. [ 0.508483] RPC: Registered udp transport module. [ 0.508693] RPC: Registered tcp transport module. [ 0.508863] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.509566] xen: registering gsi 16 triggering 0 polarity 1 [ 0.509630] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.638711] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6c7 took 126231 usecs [ 0.639101] xen: registering gsi 16 triggering 0 polarity 1 [ 0.639117] Already setup the GSI :16 [ 0.639511] xen: registering gsi 17 triggering 0 polarity 1 [ 0.639575] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.639762] xen: registering gsi 18 triggering 0 polarity 1 [ 0.639775] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.639938] xen: registering gsi 18 triggering 0 polarity 1 [ 0.639940] Already setup the GSI :18 [ 0.640264] xen: registering gsi 19 triggering 0 polarity 1 [ 0.640275] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.640472] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.640778] PCI: CLS 64 bytes, default 64 [ 0.640905] Unpacking initramfs... [ 1.071840] Freeing initrd memory: 28460K [ 1.072238] kvm: no hardware support [ 1.072460] has_svm: svm not available [ 1.072627] kvm: no hardware support [ 1.075777] Scanning for low memory corruption every 60 seconds [ 1.077313] Initialise system trusted keyrings [ 1.077574] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 1.080025] NFS: Registering the id_resolver key type [ 1.080208] Key type id_resolver registered [ 1.080410] Key type id_legacy registered [ 1.086321] Key type asymmetric registered [ 1.086552] Asymmetric key parser 'x509' registered [ 1.086773] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.087061] io scheduler noop registered [ 1.087230] io scheduler deadline registered [ 1.087518] io scheduler cfq registered (default) [ 1.087732] io scheduler mq-deadline registered [ 1.087899] io scheduler kyber registered [ 1.088882] PCI Interrupt Link [LN52] enabled at IRQ 52 [ 1.089076] xen: registering gsi 52 triggering 0 polarity 0 [ 1.089125] xen: --> pirq=52 -> irq=52 (gsi=52) [ 1.089558] PCI Interrupt Link [LN53] enabled at IRQ 53 [ 1.089730] xen: registering gsi 53 triggering 0 polarity 0 [ 1.089745] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.090050] pcieport 0000:00:02.0: Signaling PME with IRQ 114 [ 1.090281] pcieport 0000:00:09.0: Signaling PME with IRQ 115 [ 1.090733] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.091049] ACPI: Power Button [PWRF] [ 1.091919] Warning: Processor Platform Limit not supported. [ 1.092420] xen:xen_evtchn: Event-channel device installed [ 1.092742] xen_pciback: backend is vpci [ 1.093763] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.115293] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.116488] hpet_acpi_add: no address or irqs in _CRS [ 1.116790] Non-volatile memory driver v1.3 [ 1.121506] loop: module loaded [ 1.127886] ahci 0000:00:11.0: version 3.0 [ 1.128086] xen: registering gsi 22 triggering 0 polarity 1 [ 1.128134] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.128340] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.128677] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.129972] scsi host0: ahci [ 1.130741] scsi host1: ahci [ 1.131322] scsi host2: ahci [ 1.131807] scsi host3: ahci [ 1.132189] ata1: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff900 irq 22 [ 1.132479] ata2: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff980 irq 22 [ 1.132781] ata3: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa00 irq 22 [ 1.133060] ata4: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa80 irq 22 [ 1.133678] tun: Universal TUN/TAP device driver, 1.6 [ 1.134030] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.134205] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.134402] sky2: driver version 1.30 [ 1.134669] xen_netfront: Initialising Xen virtual ethernet driver [ 1.135134] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.135366] ehci-pci: EHCI PCI platform driver [ 1.135780] xen: registering gsi 17 triggering 0 polarity 1 [ 1.135797] Already setup the GSI :17 [ 1.136100] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.136449] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.136732] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.137031] ehci-pci 0000:00:12.2: debug port 1 [ 1.137405] ehci-pci 0000:00:12.2: irq 17, io mem 0xef2ffe00 [ 1.144520] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.144823] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.145124] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.145395] usb usb1: Product: EHCI Host Controller [ 1.145575] usb usb1: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.145745] usb usb1: SerialNumber: 0000:00:12.2 [ 1.146308] hub 1-0:1.0: USB hub found [ 1.146493] hub 1-0:1.0: 6 ports detected [ 1.147070] xen: registering gsi 19 triggering 0 polarity 1 [ 1.147086] Already setup the GSI :19 [ 1.147388] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.147706] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.147985] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.148284] ehci-pci 0000:00:13.2: debug port 1 [ 1.148621] ehci-pci 0000:00:13.2: irq 19, io mem 0xef2fff00 [ 1.155517] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.155804] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.156105] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.156372] usb usb2: Product: EHCI Host Controller [ 1.156565] usb usb2: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.156729] usb usb2: SerialNumber: 0000:00:13.2 [ 1.157279] hub 2-0:1.0: USB hub found [ 1.157461] hub 2-0:1.0: 6 ports detected [ 1.157876] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.158080] ohci-pci: OHCI PCI platform driver [ 1.158501] xen: registering gsi 16 triggering 0 polarity 1 [ 1.158511] Already setup the GSI :16 [ 1.158740] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.159088] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.159503] ohci-pci 0000:00:12.0: irq 16, io mem 0xef2fb000 [ 1.215643] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.215994] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.216266] usb usb3: Product: OHCI PCI host controller [ 1.216453] usb usb3: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.216646] usb usb3: SerialNumber: 0000:00:12.0 [ 1.217212] hub 3-0:1.0: USB hub found [ 1.217388] hub 3-0:1.0: 3 ports detected [ 1.217916] xen: registering gsi 16 triggering 0 polarity 1 [ 1.217931] Already setup the GSI :16 [ 1.218163] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.218533] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.218880] ohci-pci 0000:00:12.1: irq 16, io mem 0xef2fc000 [ 1.274652] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.274993] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.275262] usb usb4: Product: OHCI PCI host controller [ 1.275429] usb usb4: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.275612] usb usb4: SerialNumber: 0000:00:12.1 [ 1.276123] hub 4-0:1.0: USB hub found [ 1.276308] hub 4-0:1.0: 3 ports detected [ 1.276820] xen: registering gsi 18 triggering 0 polarity 1 [ 1.276837] Already setup the GSI :18 [ 1.277127] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.277464] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.277914] ohci-pci 0000:00:13.0: irq 18, io mem 0xef2fd000 [ 1.334631] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.334949] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.335218] usb usb5: Product: OHCI PCI host controller [ 1.335384] usb usb5: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.335586] usb usb5: SerialNumber: 0000:00:13.0 [ 1.336090] hub 5-0:1.0: USB hub found [ 1.336276] hub 5-0:1.0: 3 ports detected [ 1.336790] xen: registering gsi 18 triggering 0 polarity 1 [ 1.336804] Already setup the GSI :18 [ 1.337034] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.337388] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.337757] ohci-pci 0000:00:13.1: irq 18, io mem 0xef2fe000 [ 1.394668] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.394988] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.395257] usb usb6: Product: OHCI PCI host controller [ 1.395484] usb usb6: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.395651] usb usb6: SerialNumber: 0000:00:13.1 [ 1.396165] hub 6-0:1.0: USB hub found [ 1.396344] hub 6-0:1.0: 3 ports detected [ 1.396769] uhci_hcd: USB Universal Host Controller Interface driver [ 1.397036] usbcore: registered new interface driver usblp [ 1.397242] usbcore: registered new interface driver usb-storage [ 1.397489] i8042: PNP: No PS/2 controller found. [ 1.397655] i8042: Probing ports directly. [ 1.400760] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.400991] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.401468] rtc_cmos 00:01: RTC can wake from S4 [ 1.401994] rtc_cmos 00:01: registered as rtc0 [ 1.402187] rtc_cmos 00:01: alarms up to one day, y3k, 242 bytes nvram [ 1.402523] device-mapper: uevent: version 1.0.3 [ 1.402836] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.403163] hidraw: raw HID events driver (C) Jiri Kosina [ 1.405662] usbcore: registered new interface driver usbhid [ 1.405828] usbhid: USB HID core driver [ 1.407519] Initializing XFRM netlink socket [ 1.407966] NET: Registered protocol family 10 [ 1.408617] Segment Routing with IPv6 [ 1.409476] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.409896] NET: Registered protocol family 17 [ 1.410079] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.410416] Key type dns_resolver registered [ 1.411791] mce: Using 2 MCE banks [ 1.412002] Using IPI No-Shortcut mode [ 1.412214] sched_clock: Marking stable (1375837465, 35827423)->(1417015745, -5350857) [ 1.413624] registered taskstats version 1 [ 1.413817] Loading compiled-in X.509 certificates [ 1.414477] Magic number: 11:20:571 [ 1.414880] acpi PNP0C0F:18: hash matches [ 1.415166] console [netcon0] enabled [ 1.415327] netconsole: network logging started [ 1.415683] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.426707] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.427013] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 1.427335] cfg80211: failed to load regulatory.db [ 1.427535] ALSA device list: [ 1.427734] No soundcards found. [ 1.444564] ata3: SATA link down (SStatus 0 SControl 300) [ 1.444838] ata4: SATA link down (SStatus 0 SControl 300) [ 1.445536] ata2: SATA link down (SStatus 0 SControl 300) [ 1.450489] usb 1-3: new high-speed USB device number 2 using ehci-pci [ 1.521620] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.566539] ata1.00: ATA-8: TOSHIBA MG03ACA100, FL1D, max UDMA/100 [ 1.566759] ata1.00: 1953525168 sectors, multi 8: LBA48 NCQ (depth 32), AA [ 1.567887] ata1.00: configured for UDMA/100 [ 1.568604] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MG03ACA1 FL1D PQ: 0 ANSI: 5 [ 1.569419] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.569551] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.569759] sd 0:0:0:0: [sda] Write Protect is off [ 1.570153] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.570164] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.579854] usb 1-3: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= 0.00 [ 1.580172] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.581200] hub 1-3:1.0: USB hub found [ 1.581466] hub 1-3:1.0: 4 ports detected [ 1.756107] sda: sda1 sda2 < sda5 > [ 1.757382] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.758475] Freeing unused kernel image memory: 840K [ 1.771605] Write protecting the kernel text: 9000k [ 1.772384] Write protecting the kernel read-only data: 2360k [ 1.772580] NX-protecting the kernel data: 5336k [ 1.773465] Run /init as init process [ 1.865268] random: crng init done [ 1.935187] bnx2: QLogic bnx2 Gigabit Ethernet Driver v2.2.6 (January 29, 2014) [ 1.935746] PCI Interrupt Link [LN48] enabled at IRQ 48 [ 1.935932] xen: registering gsi 48 triggering 0 polarity 0 [ 1.935981] xen: --> pirq=48 -> irq=48 (gsi=48) [ 1.936730] bnx2 0000:02:00.0 eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ea000000, IRQ 48, node addr c4:54:44:da:a9:21 [ 1.937207] PCI Interrupt Link [LN49] enabled at IRQ 49 [ 1.937377] xen: registering gsi 49 triggering 0 polarity 0 [ 1.937397] xen: --> pirq=49 -> irq=49 (gsi=49) [ 1.938118] bnx2 0000:02:00.1 eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ec000000, IRQ 49, node addr c4:54:44:da:a9:22 [ 1.941068] mpt3sas version 26.100.00.00 loaded [ 1.941783] mpt3sas 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.942533] PCI Interrupt Link [LN24] enabled at IRQ 24 [ 1.942731] xen: registering gsi 24 triggering 0 polarity 0 [ 1.942804] xen: --> pirq=24 -> irq=24 (gsi=24) [ 1.942866] mpt2sas_cm0: 32 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (438264 kB) [ 1.998107] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 1.998460] mpt2sas_cm0: MSI-X vectors supported: 1, no of cores: 8, max_msix_vectors: -1 [ 1.998993] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 117 [ 1.999161] mpt2sas_cm0: iomem(0x00000000ef1f0000), mapped(0xf6028e4a), size(65536) [ 1.999426] mpt2sas_cm0: ioport(0x000000000000fc00), size(256) [ 2.049580] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c5d1eb9c, max_idle_ns: 440795334678 ns [ 2.050095] clocksource: Switched to clocksource tsc [ 2.056751] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 2.057077] mpt2sas_cm0: sending diag reset !! [ 3.353491] mpt2sas_cm0: diag reset: SUCCESS [ 3.399706] mpt2sas_cm0: Allocated physical memory: size(1283 kB) [ 3.399924] mpt2sas_cm0: Current Controller Queue Depth(2552),Max Controller Queue Depth(2607) [ 3.400226] mpt2sas_cm0: Scatter Gather Elements per IO(128) [ 3.445591] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ 3.445928] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ 3.445949] mpt2sas_cm0: LSISAS2008: FWVersion(07.15.08.00), ChipRevision(0x03), BiosVersion(07.11.10.00) [ 3.446596] mpt2sas_cm0: Protocol=( [ 3.446597] Initiator [ 3.446760] ,Target [ 3.446916] ), [ 3.447072] Capabilities=( [ 3.447225] Raid [ 3.447381] ,TLR [ 3.447541] ,EEDP [ 3.447756] ,Snapshot Buffer [ 3.447909] ,Diag Trace Buffer [ 3.448065] ,Task Set Full [ 3.448224] ,NCQ [ 3.448379] ) [ 3.448908] scsi host4: Fusion MPT SAS Host [ 3.462004] mpt2sas_cm0: sending port enable !! [ 6.035722] mpt2sas_cm0: host_add: handle(0x0001), sas_addr(0x5b083fe0e50a5700), phys(8) [ 11.165508] mpt2sas_cm0: port enable: SUCCESS [ 11.490404] PM: Image not found (code -22) [ 11.871365] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 12.224076] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 13.844960] systemd-udevd[1531]: Network interface NamePolicy= disabled on kernel command line, ignoring. [ 14.149299] systemd-udevd[1545]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.149316] systemd-udevd[1541]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.155057] systemd-udevd[1545]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.155178] systemd-udevd[1541]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.184735] systemd-udevd[1543]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.184799] systemd-udevd[1541]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.189732] systemd-udevd[1543]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.190385] systemd-udevd[1541]: Process 'ifupdown-hotplug' failed with exit code 1. [ 15.154848] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 16.298800] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 16.359620] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 16.437336] Adding 1949692k swap on /dev/mapper/nocera1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 17.027054] systemd-udevd[1543]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 17.031643] xenbr0: port 1(eth0) entered blocking state [ 17.031819] xenbr0: port 1(eth0) entered disabled state [ 17.032061] device eth0 entered promiscuous mode [ 17.140943] bnx2 0000:02:00.0 eth0: using MSIX [ 17.147871] xenbr0: port 1(eth0) entered blocking state [ 17.148084] xenbr0: port 1(eth0) entered forwarding state [ 17.148274] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready